diff options
Diffstat (limited to 'MIBS/enterasys/CTRON-AppleTalk-ROUTER-MIB')
| -rw-r--r-- | MIBS/enterasys/CTRON-AppleTalk-ROUTER-MIB | 3339 |
1 files changed, 3339 insertions, 0 deletions
diff --git a/MIBS/enterasys/CTRON-AppleTalk-ROUTER-MIB b/MIBS/enterasys/CTRON-AppleTalk-ROUTER-MIB new file mode 100644 index 0000000..c5db540 --- /dev/null +++ b/MIBS/enterasys/CTRON-AppleTalk-ROUTER-MIB @@ -0,0 +1,3339 @@ +CTRON-AppleTalk-ROUTER-MIB DEFINITIONS ::= BEGIN + +-- ctron-appletalk-router-mib.txt +-- Revision: 1.01.00 +-- Part Number: +-- Date: August 11, 1995 + + +-- Cabletron Systems, Inc. +-- 35 Industrial Way, P.O. Box 5005 +-- Rochester, NH 03867-0505 +-- (603) 332-9400 +-- support@ctron.com + +-- This module provides authoritative definitions for Cabletron's +-- enterprise specific at Routing Services MIB. +-- +-- This module will be extended, as required. +-- + +-- Cabletron Systems reserves the right to make changes in +-- specification and other information contained in this document +-- without prior notice. The reader should consult Cabletron Systems +-- to determine whether any such changes have been made. +-- +-- In no event shall Cabletron Systems be liable for any incidental, +-- indirect, special, or consequential damages whatsoever (including +-- but not limited to lost profits) arising out of or related to this +-- document or the information contained in it, even if Cabletron +-- Systems has been advised of, known, or should have known, the +-- possibility of such damages. +-- +-- Cabletron grants vendors, end-users, and other interested parties +-- a non-exclusive license to use this Specification in connection +-- with the management of Cabletron products. +-- Copyright August 95 Cabletron Systems +-- + + +IMPORTS + OBJECT-TYPE + FROM RFC-1212 + DisplayString, PhysAddress + FROM RFC1213-MIB + nwRouter, nwRtrProtoSuites + FROM ROUTER-OIDS + Counter, TimeTicks, Gauge + FROM RFC1155-SMI; + + + +nwRtrExperimental OBJECT IDENTIFIER ::= { nwRouter 4 } + + +-- The At Router Group. + +nwAtRouter OBJECT IDENTIFIER ::= { nwRtrProtoSuites 4 } + +nwAtMibs OBJECT IDENTIFIER ::= { nwAtRouter 1 } +nwAtComponents OBJECT IDENTIFIER ::= { nwAtRouter 2 } + + +-- At Router Component Groups + +nwAtSystem OBJECT IDENTIFIER ::= { nwAtComponents 1 } +nwAtForwarding OBJECT IDENTIFIER ::= { nwAtComponents 2 } +nwAtTopology OBJECT IDENTIFIER ::= { nwAtComponents 4 } +nwAtFib OBJECT IDENTIFIER ::= { nwAtComponents 5 } +nwAtEndSystems OBJECT IDENTIFIER ::= { nwAtComponents 6 } +nwAtAccessControl OBJECT IDENTIFIER ::= { nwAtComponents 7 } +nwAtFilters OBJECT IDENTIFIER ::= { nwAtComponents 8 } +nwAtRedirector OBJECT IDENTIFIER ::= { nwAtComponents 9 } +nwAtEvent OBJECT IDENTIFIER ::= { nwAtComponents 10 } +nwAtWorkGroup OBJECT IDENTIFIER ::= { nwAtComponents 11 } +nwAtNetDiag OBJECT IDENTIFIER ::= { nwAtComponents 12 } + +-- At Router System Groups + +nwAtSysConfig OBJECT IDENTIFIER ::= { nwAtSystem 1 } +nwAtSysAdministration OBJECT IDENTIFIER ::= { nwAtSystem 2 } + +-- At Router Forwarding Groups + +nwAtFwdSystem OBJECT IDENTIFIER ::= { nwAtForwarding 1 } +nwAtFwdInterfaces OBJECT IDENTIFIER ::= { nwAtForwarding 2 } + +nwAtFwdCounters OBJECT IDENTIFIER ::= { nwAtFwdSystem 1 } +nwAtFwdIfConfig OBJECT IDENTIFIER ::= { nwAtFwdInterfaces 1 } +nwAtFwdIfCounters OBJECT IDENTIFIER ::= { nwAtFwdInterfaces 2 } + + +-- At Router Routing Groups + +nwAtDistanceVector OBJECT IDENTIFIER ::= { nwAtTopology 1 } +nwAtLinkState OBJECT IDENTIFIER ::= { nwAtTopology 2 } + +nwAtProto OBJECT IDENTIFIER ::= { nwAtDistanceVector 1 } +nwAtProtoSystem OBJECT IDENTIFIER ::= { nwAtProto 1 } +nwAtProtoInterface OBJECT IDENTIFIER ::= { nwAtProto 2 } + +nwAtProtoConfig OBJECT IDENTIFIER ::= { nwAtProtoSystem 1 } +nwAtProtoCounters OBJECT IDENTIFIER ::= { nwAtProtoSystem 2 } + +nwAtProtoIfConfig OBJECT IDENTIFIER ::= { nwAtProtoInterface 1 } +nwAtProtoIfCounters OBJECT IDENTIFIER ::= { nwAtProtoInterface 2 } + + +-- At Router Host End Systems Groups + +nwAtHostsSystem OBJECT IDENTIFIER ::= { nwAtEndSystems 1 } +nwAtHostsInterfaces OBJECT IDENTIFIER ::= { nwAtEndSystems 2 } +nwAtHostsToMedia OBJECT IDENTIFIER ::= { nwAtEndSystems 3 } + +-- At Router Access Control Group + +-- At Router Filters Group + +-- At Router Redirector Group + +-- At Router Event Log Group + +nwAtEventLogConfig OBJECT IDENTIFIER ::= { nwAtEvent 1 } +nwAtEventLogFilterTable OBJECT IDENTIFIER ::= { nwAtEvent 2 } +nwAtEventLogTable OBJECT IDENTIFIER ::= { nwAtEvent 3 } + +-- At Router Work-Group Group + + +-- AT Network Diagnostic Group + +nwAtNetDiagPing OBJECT IDENTIFIER ::= { nwAtNetDiag 1 } +nwAtNetDiagTelnet OBJECT IDENTIFIER ::= { nwAtNetDiag 2 } +nwAtNetDiagOutbound OBJECT IDENTIFIER ::= { nwAtNetDiag 3 } + + + AtNetworkNumber ::= + -- 2 octets of network number in network byte order + OCTET STRING (SIZE (2)) + + AtDdpNodeAddress ::= + -- 2 octets of net number in network byte order, + -- 1 octet of node number + OCTET STRING (SIZE (3)) + + AtName ::= + -- 0 to 32 octets of + -- AppleTalk ASCII [10] + OCTET STRING (SIZE (0..32)) + + +-- At MIB Group +-- This group contains information about the revision level of this +-- MIB within the device. It allows verification of the released +-- version without having to read other objects. + +nwAtMibRevText OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates the current revision level of the Cabletron at + Routing Services MIB in textual format." + ::= { nwAtMibs 1 } + + +-- At Router System Group +-- This group contains the objects that pertain to the at routing +-- services at a global, device-wide level. + + +-- At System Configuration Group +-- This group contains the objects that pertain to the setup and +-- configuration of the At routing services at a global, +-- device-wide level. + +nwAtSysRouterId OBJECT-TYPE + SYNTAX AtNetworkNumber + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The AppleTalk node address used to uniquely identify the + host (device) running the AppleTalk Routing Services. The + value of nwAtSysRouterId is equal to the highest AppleTalk + node address assigned to any router port." + ::= { nwAtSysConfig 1 } + +-- At System Administration Group +-- This group contains the objects that pertain to the administration of +-- At routing services at a global, device-wide level. + +nwAtSysAdminSTATUS OBJECT-TYPE + SYNTAX INTEGER { + other(1), -- none of the following + disabled(2), -- shutdown the router + enabled(3) -- startup the router + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Sets the administrative state of AppleTalk Routing + Services system wide. Enabled (3) causes AppleTalk Routing + Services to become active on all router ports configured + and enabled for AppleTalk Routing Services. Disabled (2) + causes AppleTalk Routing Services to become inactive + system-wide." + ::= { nwAtSysAdministration 1 } + +nwAtSysOperSTATUS OBJECT-TYPE + SYNTAX INTEGER { + other(1), -- none of the following + disabled(2), -- not running + enabled(3), -- running + pending-disable(4), -- shut-down in progress + pending-enable(5), -- start-up in progress + invalid-config(6) -- not running,invalid config + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates the operating condition of AppleTalk Routing + Services system- wide. The value of nwAtSysOperStatus + indicates any problem with your AppleTalk Routing Services + configuration. A value of 6 indicates that regardless of + the value of nwAtSysAdminStatus, AppleTalk Routing + Services is not operating because of an invalid + configuration." + ::= { nwAtSysAdministration 2 } + +nwAtSysAdminReset OBJECT-TYPE + SYNTAX INTEGER { + other(1), -- none of the following + reset(2) -- force a reset + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Resets AppleTalk Routing Services system-wide. Reset (2) + forces a restart of AppleTalk Routing Services without a + graceful shutdown on any active router ports and without + affecting any other routing services." + ::= { nwAtSysAdministration 3 } + +nwAtSysOperationalTime OBJECT-TYPE + SYNTAX TimeTicks + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates the elapsed time, in hundredths of a second, + that nwAtSysOperStatus has been in its current state." + ::= { nwAtSysAdministration 4 } + +nwAtSysVersion OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates the current revision level of the AppleTalk + Routing Services firmware, in textual format." + ::= { nwAtSysAdministration 5 } + + +-- at Forwarding Group +-- This group contains the managed objects used to setup and configure +-- the at router ports for packet forwarding as well as the aggregate +-- and per-interface at packet forwarding counters. + + +-- at System-wide Packet Forwarding Counters +-- This group contains the aggregate (device-wide) at packet forwarding +-- counters. The byte counters include bytes for the network layer on +-- up, framing is not included. + +nwAtFwdCtrAdminSTATUS OBJECT-TYPE + SYNTAX INTEGER { + other(1), + disabled(2), + enabled(3) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Sets the administrative state of the aggregate + (system-wide) AppleTalk packet and byte counters. + Enabled (3) causes these counters to become active. + Disabled (2) causes these counters to become inactive." + ::= { nwAtFwdCounters 1 } + +nwAtFwdCtrReset OBJECT-TYPE + SYNTAX INTEGER { + other(1), + reset(2) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Reset(2) resets the aggregate (system-wide) AppleTalk + packet and byte counters. Reset (2) resets the AppleTalk + aggregate counters to 0.nwAtFwdCtrOperationalTime is also + reset to 0." + ::= { nwAtFwdCounters 2 } + +nwAtFwdCtrOperationalTime OBJECT-TYPE + SYNTAX TimeTicks + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates the elapsed time, in hundredths of a second, + that nwAtFwdCtrAdminStatus has been in the current state." + ::= { nwAtFwdCounters 3 } + +nwAtFwdCtrInPkts OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates the total number of AppleTalk packets that + have been received, system-wide, during + nwAtFwdCtrOperationalTime." + ::= { nwAtFwdCounters 4 } + +nwAtFwdCtrOutPkts OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates the total number of AppleTalk packets that + have been transmitted, system-wide, during + nwAtFwdCtrOperationalTime." + ::= { nwAtFwdCounters 5 } + +nwAtFwdCtrFwdPkts OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates the total number of AppleTalk packets that + have been forwarded, system-wide, during + nwAtFwdCtrOperationalTime." + ::= { nwAtFwdCounters 6 } + + +nwAtFwdCtrFilteredPkts OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates the total number of AppleTalk packets that + have been administratively filtered, system-wide, during + nwAtFwdCtrOperationalTime." + ::= { nwAtFwdCounters 7 } + +nwAtFwdCtrDiscardPkts OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates the total number of AppleTalk packets that + have been discarded, system-wide, during + nwAtFwdCtrOperationalTime." + ::= { nwAtFwdCounters 8 } + +nwAtFwdCtrAddrErrPkts OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates the total number of AppleTalk packets that + have been discarded, system-wide, during + nwAtFwdCtrOperationalTime because of addressing errors + in the AppleTalk header." + ::= { nwAtFwdCounters 9 } + +nwAtFwdCtrLenErrPkts OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates the total number of AppleTalk packets that + have been discarded, system-wide, during + nwAtFwdCtrOperationalTime, because an invalid packet + length is contained in the AppleTalk header." + ::= { nwAtFwdCounters 10 } + +nwAtFwdCtrHdrErrPkts OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates the total number of at packets that have been + discarded, device-wide, during nwAtFwdCtrOperationalTime, + because of an invalid at header." + ::= { nwAtFwdCounters 11 } + +nwAtFwdCtrInBytes OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates the total number of bytes in the AppleTalk + packets that have been received, system-wide, during + nwAtFwdCtrOperationalTime." + ::= { nwAtFwdCounters 12 } + +nwAtFwdCtrOutBytes OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates the total number of bytes in the AppleTalk + packets that have been transmitted, system-wide, during + nwAtFwdCtrOperationalTime." + ::= { nwAtFwdCounters 13 } + +nwAtFwdCtrFwdBytes OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates the total number of bytes in the AppleTalk + packets that have been forwarded, system-wide, during + nwAtFwdCtrOperationalTime." + ::= { nwAtFwdCounters 14 } + + +nwAtFwdCtrFilteredBytes OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates the total number of bytes in the AppleTalk + packets that have been administratively filtered, + system-wide, during nwAtFwdCtrOperationalTime." + ::= { nwAtFwdCounters 15 } + +nwAtFwdCtrDiscardBytes OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates the total number of bytes in the AppleTalk + packets that have been discarded, system wide, during + nwAtFwdCtrOperationalTime." + ::= { nwAtFwdCounters 16 } + +nwAtFwdCtrHostInPkts OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates the total number of AppleTalk packets that + have been successfully delivered to the local host, + during nwAtFwdCtrOperationalTime." + ::= { nwAtFwdCounters 17 } + +nwAtFwdCtrHostOutPkts OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates the total number of AppleTalk packets that + have been transmitted by the local host, during + nwAtFwdCtrOperationalTime." + ::= { nwAtFwdCounters 18 } + +nwAtFwdCtrHostDiscardPkts OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates the total number of AppleTalk packets that + have been discarded by the local host, during + nwAtFwdCtrOperationalTiime, due to a lack of host + resources." + ::= { nwAtFwdCounters 19 } + +nwAtFwdCtrHostInBytes OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates the total number of bytes in the AppleTalk + packets that have been received by the local host, during + nwAtFwdCtrOperationalTime." + ::= { nwAtFwdCounters 20 } + +nwAtFwdCtrHostOutBytes OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates the total number of bytes in the AppleTalk + packets that have been transmitted by the local host, + during nwAtFwdCtrOperationalTime." + ::= { nwAtFwdCounters 21 } + +nwAtFwdCtrHostDiscardBytes OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates the total number of bytes in the AppleTalk + packets that have been discarded by the local host, + during nwAtFwdCtrOperationalTime, due to a lack of host + resources." + ::= { nwAtFwdCounters 22 } + + +-- at Forwarding Interface Table +-- This table contains the managed objects used to set-up and configure +-- each router port. +nwAtFwdIfTable OBJECT-TYPE + SYNTAX SEQUENCE OF NwAtFwdIfEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "This table contains an entry for each router port. + This table is indexed by nwAtFwdIfIndex, which indicates + the value of MIB 2 ifindex, which identifies the router + port for which each entry exists." + ::= { nwAtFwdIfConfig 1 } + +nwAtFwdIfEntry OBJECT-TYPE + SYNTAX NwAtFwdIfEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "Each entry specifies the AppeTalk Routing Services + configuration for the router port for which the entry + exists." + INDEX { nwAtFwdIfIndex } + ::= { nwAtFwdIfTable 1 } + +NwAtFwdIfEntry ::= + SEQUENCE { + nwAtFwdIfIndex INTEGER, + nwAtFwdIfAdminSTATUS INTEGER, + nwAtFwdIfOperSTATUS INTEGER, + nwAtFwdIfOperationalTime TimeTicks, + nwAtFwdIfControl INTEGER, + nwAtFwdIfMtu INTEGER, + nwAtFwdIfForwarding INTEGER, + nwAtFwdIfFrameType INTEGER, + nwAtFwdIfAclIdentifier INTEGER, + nwAtFwdIfAclSTATUS INTEGER, + nwAtFwdIfCacheControl INTEGER, + nwAtFwdIfCacheEntries Counter, + nwAtFwdIfCacheHits Counter, + nwAtFwdIfCacheMisses Counter + } + +nwAtFwdIfIndex OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates the value of the MIB 2 ifIndex, which + identifies the router port for which the entry exists." + ::= { nwAtFwdIfEntry 1 } + +nwAtFwdIfAdminSTATUS OBJECT-TYPE + SYNTAX INTEGER { + other(1), + disabled(2), + enabled(3) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Sets the administrative state of AppleTalk Routing + Services on the router port for which the entry exists. + Enabled (3) causes AppleTalk Routing Services to become + active. Disabled (2) causes it to become inactive." + ::= { nwAtFwdIfEntry 2 } + +nwAtFwdIfOperSTATUS OBJECT-TYPE + SYNTAX INTEGER { + other(1), -- none of the following + disabled(2), -- not running + enabled(3), -- running + pending-disable(4), -- shut-down in progress + pending-enable(5), -- start-up in progress + invalid-config(6) -- not running,invalid config + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates the current operating condition of AppleTalk + Routing Services on the AppleTalk router port for which + the entry exists. The value of nwAtFwdIfOperStatus + indicates any problem with the configuration of AppleTalk + Routing Services on the router port. A value of 6 + indicates that regardless of the state of + nwAtFwdIfAdminStatus AppleTalk Routing Services is not + operating because of an invalid port-level configuration." + ::= { nwAtFwdIfEntry 3 } + +nwAtFwdIfOperationalTime OBJECT-TYPE + SYNTAX TimeTicks + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates the elapsed time, in hundredths of a second, + that nwAtFwdIfOper Status has been in its current state." + ::= { nwAtFwdIfEntry 4 } + +nwAtFwdIfControl OBJECT-TYPE + SYNTAX INTEGER { + other(1), + add(2), + delete(3) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "This object does not apply to this protocol. It is a + common object, inherited from the MIB framework used to + provide a common management interface to all the Cabletron + Routing Services protocol-specific MIBs. Setting this + object has no effect." + ::= { nwAtFwdIfEntry 5 } + +nwAtFwdIfMtu OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Specifies the Maximum Transmissions Unit (MTU) for + AppleTalk packets on the router port for which the entry + exists. This includes the AppleTalk header and data, but + does not include framing." + ::= { nwAtFwdIfEntry 6 } + + +nwAtFwdIfForwarding OBJECT-TYPE + SYNTAX INTEGER { + other(1), + disabled(2), + enabled(3) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Controls forwarding of AppleTalk packets on the + AppleTalk router port for which the entry exists. + Enabled (3) causes AppleTalk packets to be forwarded. + Disabled (2) prevents AppleTalk packets from being + forwarded." + ::= { nwAtFwdIfEntry 7 } + +nwAtFwdIfFrameType OBJECT-TYPE + SYNTAX INTEGER { -- valid media types + other(1), -- experimental + ethernet(2), -- ethernet + snap(3), -- enet,fddi,and token ring + nativewan(8), -- wan media types + encapenet(9), -- wan media types + encapenetsnap(11), -- wan media types + encapfddisnap(16), -- wan media types + canonical(17) -- special, tbd + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Specifies the framing type for AppleTalk packets forwarded on the + router port for which the entry exists. Some frame types are only + valid for specific media types. The comments reflect those valid + media types." + DEFVAL { snap } + ::= { nwAtFwdIfEntry 8 } + +nwAtFwdIfAclIdentifier OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Specifies the Access Control ID of the access control + list in effect for AppleTalk packets being routed on + the router port for which the entry exists. A value of 0 + indicates that no access control list is in effect." + ::= { nwAtFwdIfEntry 9 } + +nwAtFwdIfAclSTATUS OBJECT-TYPE + SYNTAX INTEGER { + other(1), + disabled(2), + enabled(3) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Controls the operation of any access control list + configured for AppleTalk traffic on the router port for + which the entry exists. Enabled (3) applies the access + control list indicated by the value of + nwAtFwdIfAclIdentifier to all AppleTalk traffic being + routed on the port. Disabled (2) prevents the access + control list from being applied." + ::= { nwAtFwdIfEntry 10 } + +nwAtFwdIfCacheControl OBJECT-TYPE + SYNTAX INTEGER { + other(1), + disable(2), + enable(3) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Controls AppleTalk Address caching on the router port + for which the entry exists. When AppleTalk Address + caching is enabled, AppleTalk Addresses used for address + validation, filtering, and forwarding are stored in the + cache. This cache is checked first before doing a full + route table lockup, which speeds up the switching process. + Enabled (3) turns on AppleTalk Address caching. + Disabled (2) turns it off." + ::= { nwAtFwdIfEntry 11 } + +nwAtFwdIfCacheEntries OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates the number of entries in the AppleTalk Address + cache on the router port for which the entry exists." + ::= { nwAtFwdIfEntry 12 } + +nwAtFwdIfCacheHits OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates the number of times entries in the AppleTalk + Address cache have been used to provide the AppleTalk + address required to validate, filter, or forward an + AppleTalk packet on the router port." + ::= { nwAtFwdIfEntry 13 } + +nwAtFwdIfCacheMisses OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates the number of times the AppleTalk Address + required to validate, filter, or forward an AppleTalk + packet on the router port was not found in the AppleTalk + Address cache." + ::= { nwAtFwdIfEntry 14 } + + +-- The at Interface Address Table +-- This table contains the managed object used to setup and configure +-- at addresses on a per router port basis. + + + +nwAtportTable OBJECT-TYPE + SYNTAX SEQUENCE OF NwAtportEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "This table contains an entry for each router port + configured for AppleTalk Routing Services." + ::= { nwAtFwdIfConfig 2 } + +nwAtportEntry OBJECT-TYPE + SYNTAX NwAtportEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "Each entry specifies the AppleTalk address information + for the router port for which the entry exists." + INDEX { nwAtportIndex } + ::= { nwAtportTable 1 } + +NwAtportEntry ::= SEQUENCE { + nwAtportIndex INTEGER, + nwAtportDescr DisplayString, + nwAtportType INTEGER, + nwAtportNetStart AtNetworkNumber, + nwAtportNetEnd AtNetworkNumber, + nwAtportNetAddress AtDdpNodeAddress, + nwAtportSTATUS INTEGER, + nwAtportNetConfig INTEGER, + nwAtportZoneConfig INTEGER, + nwAtportZoneDefault AtName, + nwAtportIfIndex INTEGER, + nwAtportNetFrom AtDdpNodeAddress, + nwAtportZoneFrom AtDdpNodeAddress, + nwAtportInPkts Counter, + nwAtportOutPkts Counter, + nwAtportHome INTEGER, + nwAtportCurrentZone AtName, + nwAtportConflictPhysAddr OCTET STRING + } + + + +nwAtportIndex OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates a unique value for each router port. The value + of nwAtportIndex is an integer between 1 and the total + number of ports configured for AppleTalk Routing + Services." + ::= { nwAtportEntry 1 } + +nwAtportDescr OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-write + STATUS mandatory + DESCRIPTION + "This text string provides a description of the port to + the end-user; it must not contain anything but printable + ASCII characters." + ::= { nwAtportEntry 2 } + +-- objects throughout the MIB key off of nwAtportType to determine +-- the format of address OCTET STRINGs. The address formats +-- are as follows: +-- localtalk, ethertalk1, ethertalk2, tokentalk, iptalk, +-- fdditalk, smdstalk, arctalk, and virtual take the format of +-- DdpNodeAddress +-- serialPPP: null OCTET STRING +-- serialNonstandard: vendor specific +-- aurp: see AURP MIB to determine format +-- frameRelay: 32 bit DLCI in network byte order +-- (OCTET STRING (SIZE (4))) +-- x25: X121Address (see RFC 1382) +-- ip: IpAddress (see RFC 1155) +-- osi: NSAP (OCTET STRING (SIZE (3..20))) +-- decnetIV: 6 bit area, 10 bit host in network byte order +-- (OCTET STRING (SIZE (2))) +-- arap: ??? +-- isdnInThePacketMode: ??? +-- nonAppleTalk3Com: based on ifType +-- ipx: 32 bit network number in network byte order followed +-- by datalink address of host +-- arns: 32 bit ARNS header +-- hdlc: DdpNodeAddress or null OCTET STRING + +nwAtportType OBJECT-TYPE + SYNTAX INTEGER { + other(1), -- none of the following + localtalk(2), + ethertalk1(3), + ethertalk2(4), + tokentalk(5), + iptalk(6), + serialPPP(7), + serialNonstandard(8), + virtual(9), -- an internal interface + fdditalk(10), + arctalk(11), + smdstalk(12), + aurp(13), + frameRelay(14), + x25(15), + ip(16), + osi(17), + decnetIV(18), + arap(19), + isdnInThePacketMode(20), + nonAppleTalk3Com(21), + ipx(22), + arns(23), + hdlc(24) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The value of nwArPortType indicates which link-layer + protocol is running immediately below DDP in the protocol + stack on the router port for which the entry exists. The + value of nwAtPortType determines the format of address + octet stings throughout the entire AppleTalk MIB." + ::= { nwAtportEntry 3 } + +nwAtportNetStart OBJECT-TYPE + SYNTAX AtNetworkNumber + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The first AppleTalk network address in the network range + configured for the port. If the port is not a native + AppleTalk port, this object will have the value of two + octets of zero. Set this value to the first network + address in the network range configured for the port." + ::= { nwAtportEntry 4 } + +nwAtportNetEnd OBJECT-TYPE + SYNTAX AtNetworkNumber + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The last AppleTalk network address in the network range + configured for the port. If the network to which this + AppleTalk port is connected is a non-extended network, or + if it is not a native AppleTalk port, the value for + nwAtportNetEnd will be two octets of zero. Set this value + to the last network address in the network range + configured for the port." + ::= { nwAtportEntry 5 } + +nwAtportNetAddress OBJECT-TYPE + SYNTAX AtDdpNodeAddress + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The AppleTalk node number configured for the port. This + value may be used as a hint for an initial node number + used during node-finding. If the port is not a native + AppleTalk port, this object shall have the value of + three octets of zero." + ::= { nwAtportEntry 6 } + +nwAtportSTATUS OBJECT-TYPE + SYNTAX INTEGER { + routing(1), -- this port is fully configured and routing + unconfigured(2), + off(3), + invalid(4), + endNode(5), -- this port is acting as an end node + offDueToConflict(6), -- port is off due to configuration + other(7) -- none of the states defined above + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Indicates the current state of the router port's + AppleTalk configuration. If either nwAtportNetConfig or + nwApportZoneConfig are set to (5), conflictAverseSeed, + and either the configured network number range or zone + name seeded by the port conflict with the settings of a + neighbor router, nwApPortStatus will have a value of (6), + offDueToConflict." + ::= { nwAtportEntry 7 } + +nwAtportNetConfig OBJECT-TYPE + SYNTAX INTEGER { + conflictOrientedSeed(1), + garnered(2), + guessed(3), + unconfigured(4), + conflictAverseSeed(5), + softSeed(6) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Specifies the network configuration type of the port. + If the port is not a native AppleTalk port, this object + will have an unconfigured (4) value." + ::= { nwAtportEntry 8 } + +nwAtportZoneConfig OBJECT-TYPE + SYNTAX INTEGER { + conflictOrientedSeed(1), + garnered(2), + guessed(3), + unconfigured(4), + conflictAverseSeed(5), + softSeed(6) + } + + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Specifies the zone information configuration type of the port. If the port is not a native AppleTalk port, this object will have an unconfigured (4) value." + ::= { nwAtportEntry 9 } + +nwAtportZoneDefault OBJECT-TYPE + SYNTAX AtName + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Specifies the name of the default zone for the port. If + the port only has one zone, that zone is represented + here. If the port is not a native AppleTalk port, this + object will contain an octet string of zero length." + ::= { nwAtportEntry 10 } + +nwAtportIfIndex OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Indicates the value of MIB 2 ifIndex, which identifies + the router port for which the entry exists." + ::= { nwAtportEntry 11 } + +nwAtportNetFrom OBJECT-TYPE + SYNTAX AtDdpNodeAddress + ACCESS read-only + STATUS mandatory + DESCRIPTION + "When nwAtportNetConfig is set to garnered (2), this + variable contains the DDP address of the entity from + which the AppleTalk network number was garnered. When + nwAtportNetConfig is set to conflictOrientedSeed (1), + conflictAverseSeed (5), or softSeed (6), this variable + contains the DDP address of an entity which supplied or + confirmed the AppleTalk network number. If + nwAtportNetConfig is set to guessed (3) or + unconfigured (4), or if the AppleTalk Routing + Services-enabled device has not received any network + number confirmation, this object will be set to three + octets of zero." + ::= { nwAtportEntry 12 } + +nwAtportZoneFrom OBJECT-TYPE + SYNTAX AtDdpNodeAddress + ACCESS read-only + STATUS mandatory + DESCRIPTION + "When nwAtportZoneConfig is set to garnered (2), this + variable contains the DDP address of the entity from + which the AppleTalk Zone List was garnered. When + nwAtportZoneConfig is set to conflictOrientedSeed (1), + conflictAverseSeed (5), or softSeed (6), this variable + contains the DDP address of an entity which supplied or + confirmed the AppleTalk zone information. If + nwAtportZoneConfig is set to guessed (3) or unconfigured + (4), or if the AppleTalk Routing Services-enabled device + has not received any zone confirmation, this object will + be set to three octets of zero." + ::= { nwAtportEntry 13 } + +nwAtportInPkts OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The total number of AppleTalk packets received on the + port." + ::= { nwAtportEntry 14 } + +nwAtportOutPkts OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The total number of AppleTalk packets transmitted on the + port." + ::= { nwAtportEntry 15 } + +nwAtportHome OBJECT-TYPE + SYNTAX INTEGER { + home(1), + notHome(2) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The value of nwAtportHome indicates whether or not the + AppleTalk Routing Services-enabled device, the routing + entity, is `homed' on the port for which the entry exists. + If the entity is homed on the port, then it could perform + NBP (Name Binding Protocol) registrations for services + that it chooses to advertise." + ::= { nwAtportEntry 16 } + +-- note that modifications to the following variable do +-- not affect the nbpTable + +nwAtportCurrentZone OBJECT-TYPE + SYNTAX AtName + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Specifies the current zone name for the port. In + general, this is the zone name in which services on the + port will be registered. If the port is not a native + AppleTalk port, this object will contain an octet string + of zero length." + ::= { nwAtportEntry 17 } + +nwAtportConflictPhysAddr OBJECT-TYPE + SYNTAX OCTET STRING + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates the link-layer address of the device which + caused nwAtportStatus to be set to off (3). If this + address is not available, or if nwAtportStatus is not + set to off, this object will be a zero length octet + string." + ::= { nwAtportEntry 18 } + + +-- at Forwarding Interfaces Counter Table +-- This table contains the objects that specify the packet and byte counters +-- for each configured at router port. +nwAtFwdIfCtrTable OBJECT-TYPE + SYNTAX SEQUENCE OF NwAtFwdIfCtrEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "This table contains an entry for each router port + configured and enabled for AppleTalk Routing Services." + ::= { nwAtFwdIfCounters 1 } + +nwAtFwdIfCtrEntry OBJECT-TYPE + SYNTAX NwAtFwdIfCtrEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "Each entry indicates the current packet and byte count + of AppleTalk packets on the router port for which the + entry exists." + INDEX { nwAtFwdIfCtrIfIndex } + ::= { nwAtFwdIfCtrTable 1 } + +NwAtFwdIfCtrEntry ::= + SEQUENCE { + nwAtFwdIfCtrIfIndex INTEGER, + nwAtFwdIfCtrAdminSTATUS INTEGER, + nwAtFwdIfCtrReset INTEGER, + nwAtFwdIfCtrOperationalTime TimeTicks, + nwAtFwdIfCtrInPkts Counter, + nwAtFwdIfCtrOutPkts Counter, + nwAtFwdIfCtrFwdPkts Counter, + nwAtFwdIfCtrFilteredPkts Counter, + nwAtFwdIfCtrDiscardPkts Counter, + nwAtFwdIfCtrAddrErrPkts Counter, + nwAtFwdIfCtrLenErrPkts Counter, + nwAtFwdIfCtrHdrErrPkts Counter, + nwAtFwdIfCtrInBytes Counter, + nwAtFwdIfCtrOutBytes Counter, + nwAtFwdIfCtrFwdBytes Counter, + nwAtFwdIfCtrFilteredBytes Counter, + nwAtFwdIfCtrDiscardBytes Counter, + nwAtFwdIfCtrHostInPkts Counter, + nwAtFwdIfCtrHostOutPkts Counter, + nwAtFwdIfCtrHostDiscardPkts Counter, + nwAtFwdIfCtrHostInBytes Counter, + nwAtFwdIfCtrHostOutBytes Counter, + nwAtFwdIfCtrHostDiscardBytes Counter + } + +nwAtFwdIfCtrIfIndex OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates the value MIB 2 ifindex, which identifies + the router port for which the entry exists." + ::= { nwAtFwdIfCtrEntry 1 } + +nwAtFwdIfCtrAdminSTATUS OBJECT-TYPE + SYNTAX INTEGER { + other(1), + disabled(2), + enabled(3) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Sets the administrative state of the per-port AppleTalk + packet and byte counters on the router port for which + the entry exists. Enabled (3) causes these counters to + become active. Disabled (2) causes these counters to + become inactive." + ::= { nwAtFwdIfCtrEntry 2 } + +nwAtFwdIfCtrReset OBJECT-TYPE + SYNTAX INTEGER { + other(1), + reset(2) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Resets the per-port AppleTalk packet and byte counters + on the router port for which the entry exists. Reset (2) + resets the counters to 0. nwAtFwdIfCtrOperationalTime is + also reset to 0." + ::= { nwAtFwdIfCtrEntry 3 } + +nwAtFwdIfCtrOperationalTime OBJECT-TYPE + SYNTAX TimeTicks + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates the amount of time, in hundredths of a second, + that nwAtFwdIfCtrAdminStatus has been in the current + state." + ::= { nwAtFwdIfCtrEntry 4 } + +nwAtFwdIfCtrInPkts OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates the total number of AppleTalk packets that + have been received, during nwAtFwdIfCtrOperationaltime, + on the router port for which the entry exists." + ::= { nwAtFwdIfCtrEntry 5 } + +nwAtFwdIfCtrOutPkts OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates the total number of AppleTalk packets that + have been transmitted, during nwAtFwdIfCtrOperationaltime, + on the router port for which the entry exists." + ::= { nwAtFwdIfCtrEntry 6 } + +nwAtFwdIfCtrFwdPkts OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates the total number of AppleTalk packets that + have been forwarded, during nwAtFwdIfCtrOperationaltime, + on the router port for which the entry exists." + ::= { nwAtFwdIfCtrEntry 7 } + +nwAtFwdIfCtrFilteredPkts OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates the total number of AppleTalk packets that + have been administratively filtered, during + nwAtFwdIfCtrOperationalTime, on the router port for which + the entry exists." + ::= { nwAtFwdIfCtrEntry 8 } + +nwAtFwdIfCtrDiscardPkts OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates the total number of AppleTalk packets that + have been discarded (dropped), during + nwAtFwdIfCtrOperationalTime, on the router port for which + the entry exists." + ::= { nwAtFwdIfCtrEntry 9 } + +nwAtFwdIfCtrAddrErrPkts OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates the total number of AppleTalk packets that + have been discarded, because of addressing errors in the + AppleTalk header, during nwAtFwdIfCtrOperationalTime, + on the router port for which the entry exists." + ::= { nwAtFwdIfCtrEntry 10 } + +nwAtFwdIfCtrLenErrPkts OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates the total number of AppleTalk packets that + have been discarded, because an invalid packet length + was contained in the AppleTalk header, during + nwAtFwdIfCtrOperationalTime, on the router port for which + the entry exists." + ::= { nwAtFwdIfCtrEntry 11 } + +nwAtFwdIfCtrHdrErrPkts OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates the total number of AppleTalk packets that + have been discarded, because of an invalid AppleTalk + header, during nwAtFwdIfCtrOperationalTime, on the router + port for which the entry exists." + ::= { nwAtFwdIfCtrEntry 12 } + +nwAtFwdIfCtrInBytes OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates the total number of bytes in the AppleTalk + packets that have been received, during + nwAtFwdIfCtrOperationalTime, on the router port for which + the entry exists." + ::= { nwAtFwdIfCtrEntry 13 } + +nwAtFwdIfCtrOutBytes OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates the total number of bytes in the AppleTalk + packets that have been transmitted, durin + nwAtFwdIfCtrOperationalTime, on the router port for which + the entry exists." + ::= { nwAtFwdIfCtrEntry 14 } + +nwAtFwdIfCtrFwdBytes OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates the total number of bytes in the AppleTalk + packets that have been forwarded, during + nwAtFwdIfCtrOperationalTime, on the router port for which + the entry exists." + ::= { nwAtFwdIfCtrEntry 15 } + +nwAtFwdIfCtrFilteredBytes OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates the total number of bytes in the AppleTalk + packets that have been administratively filtered, during + nwAtFwdIfCtrOperationalTime, on the router port for which + the entry exists." + ::= { nwAtFwdIfCtrEntry 16 } + +nwAtFwdIfCtrDiscardBytes OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates the total number of bytes in the AppleTalk + packets that have been discarded, during + nwAtFwdIfCtrOperationalTime, on the router port for which + the entry exists." + ::= { nwAtFwdIfCtrEntry 17 } + +nwAtFwdIfCtrHostInPkts OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates the total number of AppleTalk packets that + have been successfully delivered to the local host during + nwAtFwdIfCtrOperationalTime, that were received on the + router port for which the entry exists." + ::= { nwAtFwdIfCtrEntry 18 } + +nwAtFwdIfCtrHostOutPkts OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates the total number of AppleTalk packets that + have been transmitted by the local host, during + nwAtFwdIfCtrOperationalTime, on the router port for which + the entry exists." + ::= { nwAtFwdIfCtrEntry 19 } + +nwAtFwdIfCtrHostDiscardPkts OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates the total number of AppleTalk packets that + have been discarded by the local host due to a lack of + host resources during nwAtFwdIfCtrOperationalTime, that + were received on the router port for which the entry + exists." + ::= { nwAtFwdIfCtrEntry 20 } + +nwAtFwdIfCtrHostInBytes OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates the total number of bytes in the AppleTalk + packets that have been successfully delivered to the + local host, during nwAtFwdIfCtrOperationalTime, that + were received on the router port for which the entry + exists." + ::= { nwAtFwdIfCtrEntry 21 } + +nwAtFwdIfCtrHostOutBytes OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates the total number of bytes in the AppleTalk + packets that have been transmitted by the local host, + during nwAtFwdIfCtrOperationalTime, on the router port + for which the entry exists." + ::= { nwAtFwdIfCtrEntry 22 } + +nwAtFwdIfCtrHostDiscardBytes OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates the total number of bytes in the AppleTalk + packets that have been discarded by the local host, due + to a lack of host resources during + nwAtFwdIfCtrOperationalTime, that were received on the + router port for which the entry exists." + ::= { nwAtFwdIfCtrEntry 23 } + + +-- DistanceVector-based Protocols +-- This group contains the managed objects for the Appletalk Routing Protocol, +-- RTMP DistanceVector based routing. + +-- AppleTalk Proto System Configuration Parameters +-- This group contains the objects that pertain to the setup and +-- configuration of the AppleTalk Proto DistanceVector based routing protocol. + + + +nwAtProtoAdminSTATUS OBJECT-TYPE + SYNTAX INTEGER { + other(1), -- none of the following + disabled(2), -- shutdown the router + enabled(3) -- startup the router + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Sets the administrative state of the AppleTalk + distance-vector based routing protocol system-wide. + Enabled (3) causes the routing protocol to become active + on all router ports configured and enabled for AppleTalk + Routing Services. Disabled (2) causes the routing protocol + to become inactive." + ::= { nwAtProtoConfig 1 } + +nwAtProtoOperSTATUS OBJECT-TYPE + SYNTAX INTEGER { + other(1), -- none of the following + disabled(2), -- not running + enabled(3), -- running + pending-disable(4), -- shut-down in progress + pending-enable(5) -- start-up in progress + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates the current operating condition of the + AppleTalk Routing Services distance-vector-based routing + protocol, system-wide. The value of nwAtProtoOperStatus + indicates any problem with the routing protocol + configuration. A value of 6 indicates that regardless of + the value of nwAtProtoAdminStatus, the routing protocol + is not operating because of an invalid configuration." + ::= { nwAtProtoConfig 2 } + +nwAtProtoAdminReset OBJECT-TYPE + SYNTAX INTEGER { + other(1), -- none of the following + reset(2) -- force a reset + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Resets the routing protocol. Reset (2) forces a + system-wide restart of the protocol without a graceful + shutdown on any active router ports." + ::= { nwAtProtoConfig 3 } + +nwAtProtoOperationalTime OBJECT-TYPE + SYNTAX TimeTicks + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates the elapsed time, in hundredths of a second, + that nwAtProtoOperStatus has been in the current state." + ::= { nwAtProtoConfig 4 } + +nwAtProtoVersion OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates the current revision level of the AppleTalk + routing protocol firmware, in textual format." + ::= { nwAtProtoConfig 5 } + +nwAtProtoStackSize OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Specifies the stack size of the AppleTalk routing + protocol thread. In order for a change of this value to + take effect, the protocol (nwAtProtoAdminReset), + AppleTalk Routing Services (nwAtProtoAdminReset), or the + device running Routing Services must be reset." + ::= { nwAtProtoConfig 6 } + +nwAtProtoThreadPriority OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Specifies the run-time execution priority of the + AppleTalk routing protocol thread. In order for a change + of this value to take effect, the AppleTalk protocol + (nwAtProtoAdminReset), AppleTalk Routing Services + (nwAtProtoAdminReset), or the device running Routing + Services must be reset." + ::= { nwAtProtoConfig 7 } + +nwAtProtoDatabaseThreshold OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Specifies the run-time maximum number of entries that + can be held in the AppleTalk routing protocol route + table." + ::= { nwAtProtoConfig 8 } + +nwAtProtoAgeOut OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Specifies the amount of time (in seconds) an inactive entry + will be allowed to remain in the AppleTalk routing protocol routing table, before it is deleted, or aged-out." + ::= { nwAtProtoConfig 9 } + +nwAtProtoHoldDown OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + "This object does not apply to this protocol. It is a + common object, inherited from the MIB framework used to + provide a common management interface to all the Cabletron + Routing Services protocol-specific MIBs. Setting this + object has no effect." + ::= { nwAtProtoConfig 10 } + + +-- AppleTalk Routing Protocol System (aggregate) Counters +-- This group contains the aggregate (device-wide) AppleTalk Routing Protocol +-- packet and byte counters. +nwAtProtoCtrAdminSTATUS OBJECT-TYPE + SYNTAX INTEGER { + other(1), + disabled(2), + enabled(3) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Sets the administrative state of the aggregate + (system-wide) AppleTalk routing protocol packet and byte + counters. Enabled (3)causes these counters to become + active. Disabled (2) causes these counters to be come + inactive." + ::= { nwAtProtoCounters 1 } + +nwAtProtoCtrReset OBJECT-TYPE + SYNTAX INTEGER { + other(1), + reset(2) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Resets the aggregate (system-wide) AppleTalk + distance-vector based routing protocol packet and byte + counters. Reset (2) resets the AppleTalk aggregate + counters to 0. nwAtProtoCtrOperationalTime is also reset + to 0." + ::= { nwAtProtoCounters 2 } + +nwAtProtoCtrOperationalTime OBJECT-TYPE + SYNTAX TimeTicks + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates the elapsed time, in hundreds of seconds, that + nwAtProtoCtrAdminStatus, has been in the current + administrative state." + ::= { nwAtProtoCounters 3 } + +nwAtProtoCtrInPkts OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates the total number of AppleTalk routing protocol + packets that have been received, system-wide, during + nwAtProtoCtrOperationalTime." + ::= { nwAtProtoCounters 4 } + +nwAtProtoCtrOutPkts OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates the total number of AppleTalk routing protocol + packets that have been transmitted, system-wide, during + nwAtProtoCtrOperationalTime." + ::= { nwAtProtoCounters 5 } + +nwAtProtoCtrFilteredPkts OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates the total number of AppleTalk routing protocol + packets that have been administratively filtered, + system-wide, during nwAtProtoCtrOperationalTime." + ::= { nwAtProtoCounters 6 } + +nwAtProtoCtrDiscardPkts OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates the total number of AppleTalk routing protocol + packets that have been discarded, system-wide, during + nwAtProtoCtrOperationalTime." + ::= { nwAtProtoCounters 7 } + +nwAtProtoCtrInBytes OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates the total number of bytes in the AppleTalk + routing protocol packets that have been received, + system-wide, during nwAtProtoCtrOperationalTime." + ::= { nwAtProtoCounters 8 } + +nwAtProtoCtrOutBytes OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates the total number of bytes in the AppleTalk + routing protocol packets that have been transmitted, + system-wide, during nwAtProtoCtrOperationalTime." + ::= { nwAtProtoCounters 9 } + +nwAtProtoCtrFilteredBytes OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates the total number of bytes in the AppleTalk + routing protocol packets that have been administratively + filtered, system-wide, during + nwAtProtoCtrOperationalTime." + ::= { nwAtProtoCounters 10 } + +nwAtProtoCtrDiscardBytes OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates the total number of bytes in the AppleTalk + routing protocol packets that have been discarded, + system-wide during nwAtProtoCtrOperationalTime." + ::= { nwAtProtoCounters 11 } + + +-- at Protocol Interface Table +nwAtProtoIfTable OBJECT-TYPE + SYNTAX SEQUENCE OF NwAtProtoIfEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "This table contains an entry for each router port. Each + entry can contain different values, allowing the routing + protocol configuration to vary from router port to router + port. This table is indexed by nwAtProtoIfIndex, which + indicates the value of MIB 2 ifindex, which identifies + the router port for which the entry exists." + ::= { nwAtProtoIfConfig 1 } + +nwAtProtoIfEntry OBJECT-TYPE + SYNTAX NwAtProtoIfEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "Each entry contains the AppleTalk routing protocol + configuration for the router port for which the entry + exists." + INDEX { nwAtProtoIfIndex } + ::= { nwAtProtoIfTable 1 } + +NwAtProtoIfEntry ::= + SEQUENCE { + nwAtProtoIfIndex INTEGER, + nwAtProtoIfAdminSTATUS INTEGER, + nwAtProtoIfOperSTATUS INTEGER, + nwAtProtoIfOperationalTime TimeTicks, + nwAtProtoIfVersion INTEGER, + nwAtProtoIfAdvertisement INTEGER, + nwAtProtoIfFloodDelay INTEGER, + nwAtProtoIfRequestDelay INTEGER, + nwAtProtoIfPriority INTEGER, + nwAtProtoIfHelloTimer INTEGER, + nwAtProtoIfSplitHorizon INTEGER, + nwAtProtoIfPoisonReverse INTEGER, + nwAtProtoIfSnooping INTEGER, + nwAtProtoIfType INTEGER, + nwAtProtoIfXmitCost INTEGER, + nwAtProtoIfAclIdentifier INTEGER, + nwAtProtoIfAclSTATUS INTEGER + } + +nwAtProtoIfIndex OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates the value of MIB 2 ifindex, which identifies + the router port for which the entry exists." + ::= { nwAtProtoIfEntry 1 } + +nwAtProtoIfAdminSTATUS OBJECT-TYPE + SYNTAX INTEGER { + other(1), + disabled(2), + enabled(3) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Sets the administrative state of the AppleTalk routing + protocol on the router port for which the entry exists. + Enabled (3) causes the routing protocol to become active + on the router port. Disabled (2) causes it to become + inactive." + DEFVAL { disabled } + ::= { nwAtProtoIfEntry 2 } + +nwAtProtoIfOperSTATUS OBJECT-TYPE + SYNTAX INTEGER { + other(1), -- none of the following + disabled(2), -- not running + enabled(3), -- running + pending-disable(4), -- shut-down in progress + pending-enable(5) -- start-up in progress + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates the current operating condition of the + AppleTalk routing protocol on the router port for which + the entry exists. The value of nwAtProtoIfOperStatus + indicates any problem with your AppleTalk routing + protocol configuration on the router port. A value of 6 + indicates that regardless of the value of + nwAtProtoIfAdminStatus, the routing protocol is not + operating on the router port because of an invalid + configuration." + ::= { nwAtProtoIfEntry 3 } + +nwAtProtoIfOperationalTime OBJECT-TYPE + SYNTAX TimeTicks + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates the elapsed time, in hundreds of seconds, that + nwAtProtoIfOperStatus has been in the current state." + ::= { nwAtProtoIfEntry 4 } + +nwAtProtoIfVersion OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Indicates the revision level of AppleTalk routing + protocol firmware on the router port for which the entry + exists, in textual format." + ::= { nwAtProtoIfEntry 5 } + +nwAtProtoIfAdvertisement OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + "This specifies the periodic interval (in seconds) that the + AppleTalk routing protocol agent will advertise routes on this + DECnet routing port." + DEFVAL { 60 } + ::= { nwAtProtoIfEntry 6 } + +nwAtProtoIfFloodDelay OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + "This object does not apply to this protocol. It is a + common object, inherited from the MIB framework used to + provide a common management interface to all the + Cabletron Routing Services protocol specific MIBs. + Setting this object has no effect" + ::= { nwAtProtoIfEntry 7 } + +nwAtProtoIfRequestDelay OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + "This object does not apply to this protocol. It is a + common object, inherited from the MIB framework used to + provide a common management interface to all the Cabletron + Routing Services protocol specific MIBs. Setting this + object has no effect." + ::= { nwAtProtoIfEntry 8 } + +nwAtProtoIfPriority OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Sets the priority of the AppleTalk routing protocol on + the router port for which the entry exists." + ::= { nwAtProtoIfEntry 9 } + +nwAtProtoIfHelloTimer OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + "This object does not apply to this protocol. It is a + common object, inherited from the MIB framework used to + provide a common management interface to all the + Cabletron Routing Services protocol specific MIBs. + Setting this object has no effect." + ::= { nwAtProtoIfEntry 10 } + +nwAtProtoIfSplitHorizon OBJECT-TYPE + SYNTAX INTEGER { + other(1), + disabled(2), + enabled(3) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Sets the operating condition of Split Horizon on the + router port for which the entry exists. When Split Horizon + is enabled, the AppleTalk routing protocol keeps track of + which router port route information is received on, and + prevents information about a route form being sent back + out the same router port it was received on." + DEFVAL { enabled } + ::= { nwAtProtoIfEntry 11 } + +nwAtProtoIfPoisonReverse OBJECT-TYPE + SYNTAX INTEGER { + other(1), + disabled(2), + enabled(3) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Sets the operating condition of Poison Reverse on the + router port for which the entry exists. When Poison + Reverse is enabled, the AppleTalk routing protocol + advertises any downed routes as unreachable during the + period of time that it must wait before removing the + route from the route table." + DEFVAL { disabled } + ::= { nwAtProtoIfEntry 12 } + +nwAtProtoIfSnooping OBJECT-TYPE + SYNTAX INTEGER { + other(1), + disabled(2), + enabled(3) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Controls the operation of AppleTalk routing protocol + Snooping on the router port. When AppleTalk routing + protocol Snooping is enabled, the routing protocol + operates in passive mode, so that it receives route + information, builds and maintains a route table, but + does not advertise or send updates on the router port for + which the entry exists." + DEFVAL { disabled } + ::= { nwAtProtoIfEntry 13 } + +nwAtProtoIfType OBJECT-TYPE + SYNTAX INTEGER { + other(1), + bma(2), + nbma(3) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Indicates whether the directly connected network + segment does or does not support broadcast media access. + If broadcast media access is supported, AppleTalk routing + protocol advertisements are sent out one broadcast packet + per port. If broadcast media is not supported, AppleTalk + routing protocol advertisements are sent to each + neighbor." + ::= { nwAtProtoIfEntry 14 } + +nwAtProtoIfXmitCost OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Sets the cost of transmitting a packet on the network + segment connected to router port for which the entry + exists." + ::= { nwAtProtoIfEntry 15 } + +nwAtProtoIfAclIdentifier OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Specifies the Access Control List ID of the access + control list in effect for AppleTalk routing protocol + packets on the router port for which the entry exists. A + value of 0 indicates that there is no access control list + in effect for AppleTalk routing protocol packets on the + router port." + ::= { nwAtProtoIfEntry 16 } + +nwAtProtoIfAclSTATUS OBJECT-TYPE + SYNTAX INTEGER { + other(1), + disabled(2), + enabled(3) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Controls the operation of the access control list + identified by nwAtProtoIfAclIdentifier. Enabled (3) + causes the access control list to be applied to all + AppleTalk routing protocol packet traffic on the router + port for which the entry exists. Disabled (2) prevents + the access control list from being applied." + ::= { nwAtProtoIfEntry 17 } + + +-- AppleTalk Protocol Interface Counters Table +-- This table contains the managed objects for AppleTalk protocols packet and +-- byte counter on a per router port basis. +nwAtProtoIfCtrTable OBJECT-TYPE + SYNTAX SEQUENCE OF NwAtProtoIfCtrEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "This table contains the AppleTalk packet and byte counters for + each router port on this device." + ::= { nwAtProtoIfCounters 1 } + +nwAtProtoIfCtrEntry OBJECT-TYPE + SYNTAX NwAtProtoIfCtrEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "Each entry specifies the DECnet Phase IV packet and byte + counters on a per router port basis." + INDEX { nwAtProtoIfCtrIfIndex } + ::= { nwAtProtoIfCtrTable 1 } + +NwAtProtoIfCtrEntry ::= + SEQUENCE { + nwAtProtoIfCtrIfIndex INTEGER, + nwAtProtoIfCtrAdminSTATUS INTEGER, + nwAtProtoIfCtrReset INTEGER, + nwAtProtoIfCtrOperationalTime TimeTicks, + nwAtProtoIfCtrInPkts Counter, + nwAtProtoIfCtrOutPkts Counter, + nwAtProtoIfCtrFilteredPkts Counter, + nwAtProtoIfCtrDiscardPkts Counter, + nwAtProtoIfCtrInBytes Counter, + nwAtProtoIfCtrOutBytes Counter, + nwAtProtoIfCtrFilteredBytes Counter, + nwAtProtoIfCtrDiscardBytes Counter + } +nwAtProtoIfCtrIfIndex OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "This is the primary index into the AppleTalk interface counter + table. This number corresponds to the index into the mib2 + InterfaceTable which describes the router port for which + the entry exists." + ::= { nwAtProtoIfCtrEntry 1 } + +nwAtProtoIfCtrAdminSTATUS OBJECT-TYPE + SYNTAX INTEGER { + other(1), + disabled(2), + enabled(3) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Sets the administrative state of the AppleTalk packet and byte + counters on the router port for which the entry exists. + enabled(3) causes these counters to become active on the + configured AppleTalk router port. disabled(2) causes these + counters to become inactive on the configured AppleTalk router + port." + ::= { nwAtProtoIfCtrEntry 2 } + +nwAtProtoIfCtrReset OBJECT-TYPE + SYNTAX INTEGER { + other(1), + reset(2) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Resets the AppleTalk packet and byte counters on the router + port for which the entry exists. reset (2) resets the + interface-specific counters to 0. + nwAtProtoIfCtrOperationalTime is also reset to 0." + ::= { nwAtProtoIfCtrEntry 3 } + +nwAtProtoIfCtrOperationalTime OBJECT-TYPE + SYNTAX TimeTicks + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates the amount of time (No. of time ticks) that the + interface-specific AppleTalk packet and byte counters have been + active on the router port for which the entry exists." + ::= { nwAtProtoIfCtrEntry 4 } + +nwAtProtoIfCtrInPkts OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates the total number of AppleTalk packets that have been + received, on the router port for which the entry exists, + during nwAtProtoIfCtrOperationalTime." + ::= { nwAtProtoIfCtrEntry 5 } + +nwAtProtoIfCtrOutPkts OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates the total number of AppleTalk packets that have been forwarded, on the router port for which the entry exists, during nwAtProtoIfCtrOperationalTime." + ::= { nwAtProtoIfCtrEntry 6 } + +nwAtProtoIfCtrFilteredPkts OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates the total number of AppleTalk packets that have been + administratively filtered, on the router port for which this + entry exists, during nwAtProtoIfCtrOperationalTime." + ::= { nwAtProtoIfCtrEntry 7 } + +nwAtProtoIfCtrDiscardPkts OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates the total number of AppleTalk packets that have been discarded, on the router port for which the entry exists, during +nwAtProtoIfCtrOperationalTime." + ::= { nwAtProtoIfCtrEntry 8 } +nwAtProtoIfCtrInBytes OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates the total number of bytes in the AppleTalk packets that have been received, on the router port for which the entry exists, during nwAtProtoIfCtrOperationalTime." + ::= { nwAtProtoIfCtrEntry 9 } + +nwAtProtoIfCtrOutBytes OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates the total number of bytes in the AppleTalk packets that have been forwarded, on the router port for which the entry exists, during nwAtProtoIfCtrOperationalTime." + ::= { nwAtProtoIfCtrEntry 10 } +nwAtProtoIfCtrFilteredBytes OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates the total number of bytes in the AppleTalk packets that have been administratively filtered, that were received on the router port for which the entry exists, during nwAtProtoIfCtrOperationalTime." + ::= { nwAtProtoIfCtrEntry 11 } + +nwAtProtoIfCtrDiscardBytes OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates the total number of bytes in the AppleTalk packets that have been discarded, that were received on the router port for + which the entry exists, during nwAtIfCtrOperationalTime." + ::= { nwAtProtoIfCtrEntry 12 } + + +-- at Forward Information Base (FIB) Group +-- This group contains the managed objects for the forwarding table of the +-- at router. + +nwAtFibTable OBJECT-TYPE + SYNTAX SEQUENCE OF NwAtFibEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "This table contains an entry for each route being used + to forward AppleTalk data packets." + ::= { nwAtFib 1 } + +nwAtFibEntry OBJECT-TYPE + SYNTAX NwAtFibEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "Each entry in the table describes an AppleTalk route + to a particular destination." + INDEX { nwAtFibStartNet } + ::= { nwAtFibTable 1 } + +NwAtFibEntry ::= + SEQUENCE { + nwAtFibStartNet AtNetworkNumber, + nwAtFibEndNet AtNetworkNumber, + nwAtFibNextHop AtDdpNodeAddress, + nwAtFibNextHopIf INTEGER, + nwAtFibHops INTEGER, + nwAtFibRouteType INTEGER + } + +nwAtFibStartNet OBJECT-TYPE + SYNTAX AtNetworkNumber + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates the start of the network range for the route." + ::= { nwAtFibEntry 1 } + +nwAtFibEndNet OBJECT-TYPE + SYNTAX AtNetworkNumber + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates the end of the network range for the route." + ::= { nwAtFibEntry 2 } + +nwAtFibNextHop OBJECT-TYPE + SYNTAX AtDdpNodeAddress + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates the full AppleTalk network address of the + next hop router for the route. An address of all zeros + indicates a directly connected net." + ::= { nwAtFibEntry 3 } + +nwAtFibNextHopIf OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates the value of MIB 2 ifindex, which identifies + the router port through which the next hop node exists. + Packets destined for the network specified by the entry + will be forwarded on this router port." + ::= { nwAtFibEntry 4 } + +nwAtFibHops OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates the number of hops required to reach the + destination for which the entry exists. It is considered + as metric 1." + ::= { nwAtFibEntry 5 } + +nwAtFibRouteType OBJECT-TYPE + SYNTAX INTEGER { + other(1), + appleTalk(2) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates the type of route (Allows for PPP entries + later)." + ::= { nwAtFibEntry 6 } + + +-- at Host End Systems Group +-- This group contains the managed objects which control the use of the +-- Address Resolution Protocol (ARP) for mapping host addresses to physical +-- addresses of each router port ARP cache. Mechanisms are also +-- provided which allow 'snooping' such that all directly connected +-- end systems using ARP can be discovered along with their addresses. + +nwAtHostsTimeToLive OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates the amount of time (in minutes) that an entry + can remain in the AARP cache." + ::= { nwAtHostsSystem 1 } + +nwAtHostsRetryCount OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates the maximum number of times AppleTalk Routing + Services will retry each attempt to resolve a host + address." + ::= { nwAtHostsSystem 2 } + + +-- at Host Interfaces Table +-- This table contains the objects that specify the control information for +-- maintaining the ARP cache (at Net-to-Media Table). + +nwAtHostCtlTable OBJECT-TYPE + SYNTAX SEQUENCE OF NwAtHostCtlEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "This table contains the control information for + maintaining an AARP cache on each router port. Note that + the cache entries are maintained by theAppleTalk Address + Resolution Protocol Table of the AppleTalk MIB." + ::= { nwAtHostsInterfaces 1 } + +nwAtHostCtlEntry OBJECT-TYPE + SYNTAX NwAtHostCtlEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "Each entry contains the control information for the ARP + cache on the router port indicated by the value + nwAtHostCtlIfIndex." + INDEX { nwAtHostCtlIfIndex } + ::= { nwAtHostCtlTable 1 } + + +NwAtHostCtlEntry ::= + SEQUENCE { + nwAtHostCtlIfIndex INTEGER, + nwAtHostCtlAdminSTATUS INTEGER, + nwAtHostCtlOperSTATUS INTEGER, + nwAtHostCtlOperationalTime TimeTicks, + nwAtHostCtlProtocol INTEGER, + nwAtHostCtlSnooping INTEGER, + nwAtHostCtlProxy INTEGER, + nwAtHostCtlCacheMax INTEGER, + nwAtHostCtlCacheSize INTEGER, + nwAtHostCtlNumStatics Counter, + nwAtHostCtlNumDynamics Counter, + nwAtHostCtlCacheHits Counter, + nwAtHostCtlCacheMisses Counter + } + +nwAtHostCtlIfIndex OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates the value of MIB2 ifindex, which identifies + the router port for which the entry exists." + ::= { nwAtHostCtlEntry 1 } + +nwAtHostCtlAdminSTATUS OBJECT-TYPE + SYNTAX INTEGER { + other(1), + disable(2), + enable(3) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Sets the administrative state of the AARP cache on the + router port for which the entry exists. Enabled (3) causes + AARP caching to become active. Disabled (2) causes AARP + caching to perform a graceful shutdown." + ::= { nwAtHostCtlEntry 2 } + +nwAtHostCtlOperSTATUS OBJECT-TYPE + SYNTAX INTEGER { + other(1), -- none of the following + disabled(2), -- not running + enabled(3), -- running + pending-disable(4), -- shut-down in progress + pending-enable(5) -- start-up in progress + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates the current operating condition of the AARP + Table on the router port for which the entry exists." + ::= { nwAtHostCtlEntry 3 } + +nwAtHostCtlOperationalTime OBJECT-TYPE + SYNTAX TimeTicks + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates the amount of time, in hundredths of a second, + that nwAtHostCtlOperStatus has been in the current state." + ::= { nwAtHostCtlEntry 4 } + +nwAtHostCtlProtocol OBJECT-TYPE + SYNTAX INTEGER { + other(1), + disable(2), + enable(3) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Controls the operation of the AARP protocol on the + router port for which the entry exists." + ::= { nwAtHostCtlEntry 5 } + +nwAtHostCtlSnooping OBJECT-TYPE + SYNTAX INTEGER { + other(1), + disable(2), + enable(3) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Controls AARP Snooping on the router port for which the + entry exists. Given the AARP protocol is enabled, + setting nwAtHostCtlIfSnooping to enabled (3) turns on AARP Snooping. + When AARP Snooping is enabled the source AppleTalk and physical + addresses of all AARP packets received on the router port are added to + the AARP Table." + ::= { nwAtHostCtlEntry 6 } + +nwAtHostCtlProxy OBJECT-TYPE + SYNTAX INTEGER { + other(1), + disable(2), + enable(3) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "This object does not apply to this protocol. It is a + common object, inherited from the MIB framework used to + provide a common management interface to all the Cabletron + Routing Services protocol-specific MIBs. Setting this + object has no effect." + ::= { nwAtHostCtlEntry 7 } + +nwAtHostCtlCacheMax OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Indicates the maximum number of entry slots the AARP + cache can consist of. nwAtHostCtlCacheMax cannot be set + to less than 16. Setting this value does not allocate + any memory for the cache." + ::= { nwAtHostCtlEntry 8 } + + +nwAtHostCtlCacheSize OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Indicates the current number of entry slots in the AARP + cache on the router port for which the entry exists. The + cache automatically resizes to accommodate all entries + up to the maximum number of entries set by + nwAtHostCtlCacheMax." + ::= { nwAtHostCtlEntry 9 } + +nwAtHostCtlNumStatics OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates the total number of static entries in the AARP + cache on the router port for which the entry exists. + Static entries remain in the cache until they are + administratively removed." + ::= { nwAtHostCtlEntry 10 } + +nwAtHostCtlNumDynamics OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates the number of dynamic entries in the AARP + cache on the router port for which the entry exists. + Dynamic entries area added and aged out by the AARP + protocol." + ::= { nwAtHostCtlEntry 11 } + +nwAtHostCtlCacheHits OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates the number of times an entry in the AARP cache + has been used to successfully provide the physical address + required to forward an AppleTalk packet on the router + port for which the entry exists." + ::= { nwAtHostCtlEntry 12 } + +nwAtHostCtlCacheMisses OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates the number of times the physical address + required to forward an AppleTalk packet has not been + found in the AARP cache on the router port for which the + entry exists." + ::= { nwAtHostCtlEntry 13 } + + +-- at Access Control List Table +-- This table contains the managed objects for the Access Control Lists +-- within the at Router. Access Control Lists allow configuration of +-- restricted access to networks and protocols reachable thru the at +-- Router device. Access Control Lists can be defined with these +-- objects and then be independently applied to at forwarding router ports. + +nwAtAclValidEntries OBJECT-TYPE + SYNTAX Gauge + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates the number of valid entries that exist in the + Access Control List Table." + ::= { nwAtAccessControl 1 } + +nwAtAclTable OBJECT-TYPE + SYNTAX SEQUENCE OF NwAtAclEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "This table contains the Access Control List information + for theAppleTalk protocol. This table contains entries, + each of which allows packet forwarding between + source/destination pairs to be permitted or denied. The + particular list is identified by the access control + list ID. Each list may contain multiple entries ordered + by sequence number. When a particular access control list + is searched, it is searched in sequence number order and + the first match found ends the search. If no match is + found, access defaults to permitted." + ::= { nwAtAccessControl 2 } + +nwAtAclEntry OBJECT-TYPE + SYNTAX NwAtAclEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "Each entry contains AppleTalk source/destination access + information." + INDEX { nwAtAclIdentifier, nwAtAclSequence } + ::= { nwAtAclTable 1 } + +NwAtAclEntry ::= + SEQUENCE { + nwAtAclIdentifier INTEGER, + nwAtAclSequence INTEGER, + nwAtAclPermission INTEGER, + nwAtAclMatches Counter, + nwAtAclDestZone AtName, + nwAtAclSrcZone AtName + } + +nwAtAclIdentifier OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "This is the primary (major) index into the AppleTalk + access control list table. Essentially, this identifies + the access control list by a unique identifier (at least 1) + and is arbitrarily assigned by the user. All entries that + have the same ID belong to the same access control list." + ::= { nwAtAclEntry 1 } + +nwAtAclSequence OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "This is the secondary (minor) index into the AppleTalk + access control list table. This number corresponds to a + sequence number used to order multiple entries within the + same access control list." + ::= { nwAtAclEntry 2 } + +nwAtAclPermission OBJECT-TYPE + SYNTAX INTEGER { + other(1), + invalid(2), + permit(3), + deny(4), + permit-bidirectional(5), + deny-bidirectional(6) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Specifies whether access is allowed or denied between + the source and destination address pairs. Note that + source and destination are interchangeable when + bi-directional control is selected. To remove an existing + entry set invalid (2), and it will disappear after + reboot." + ::= { nwAtAclEntry 3 } + +nwAtAclMatches OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates the number of matches on this entry that + have resulted in the access restriction permit/deny + being applied as part of the forwarding process." + ::= { nwAtAclEntry 4 } + +nwAtAclDestZone OBJECT-TYPE + SYNTAX AtName + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Specifies the destination zone name used to compare for + matches on the access control list." + ::= { nwAtAclEntry 5 } + +nwAtAclSrcZone OBJECT-TYPE + SYNTAX AtName + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Specifies the source zone to be used to compare for + matches on the access control list." + ::= { nwAtAclEntry 6 } + + +-- AppleTalk Event Group + +nwAtEventAdminSTATUS OBJECT-TYPE + SYNTAX INTEGER { + other(1), + disabled(2), + enabled(3) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Sets the administrative state of AppleTalk event + logging. Enabled (3) causes the event log to become + active. Disabled (2) causes the event log to become + inactive." + ::= { nwAtEventLogConfig 1 } + +nwAtEventMaxEntries OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Sets the maximum number of entries allowed in the event + log table. When the number of entries reaches the value + of nwAtEventMaxEntries the first (oldest) entry is deleted + to allow a new entry to be added." + ::= { nwAtEventLogConfig 2 } + +nwAtEventTraceAll OBJECT-TYPE + SYNTAX INTEGER { + other(1), + disabled(2), + enabled(3) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Enabled (3) allows logging of all event types on all + router ports from all protocols and components. Disabled + (2) causes the event log filter table to specify which + events to log." + ::= { nwAtEventLogConfig 3 } + + +-- Event Log Filter Table +-- The Event Log Filter Table contains the managed objects used to set-up +-- and configure log entries. + +nwAtEventFilterTable OBJECT-TYPE + SYNTAX SEQUENCE OF NwAtEventFilterEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "This table contains an entry for each event filter + configured for AppleTalk Routing Service's events." + ::= { nwAtEventLogFilterTable 1 } + +nwAtEventFilterEntry OBJECT-TYPE + SYNTAX NwAtEventFilterEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "Each entry describes an event filter which defines a + particular type of event to be logged to the event log. + The value of nwIpEventProtocol indicates the value used + in either the nwRtgProtocolTable or the nwComponentTable + Cabletron Routing Services MIB, which indentifies the + protocol to which the entry exists." + INDEX { nwAtEventFltrProtocol, nwAtEventFltrIfNum } + ::= { nwAtEventFilterTable 1 } + +NwAtEventFilterEntry ::= + SEQUENCE { + nwAtEventFltrProtocol INTEGER, + nwAtEventFltrIfNum INTEGER, + nwAtEventFltrControl INTEGER, + nwAtEventFltrType INTEGER, + nwAtEventFltrSeverity INTEGER, + nwAtEventFltrAction INTEGER + } + +nwAtEventFltrProtocol OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates the value of the Cabletron Routing Services + MIB nwRtgProtocolInstance or nwComponentRtgInstance, + which identifies the protocol involved in the event for + which the event filter exists." + ::= { nwAtEventFilterEntry 1 } + +nwAtEventFltrIfNum OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Specifies the router port involved in the event for + which the event filter exists." + ::= { nwAtEventFilterEntry 2 } + +nwAtEventFltrControl OBJECT-TYPE + SYNTAX INTEGER { + other(1), + delete(2), + add(3) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Set this value to 3 to add the entry to the event log + table. Set this value to 2 to remove the entry from the + event filter table." + ::= { nwAtEventFilterEntry 3 } + +nwAtEventFltrType OBJECT-TYPE + SYNTAX INTEGER { + misc(1), + timer(2), + rcv(4), + xmit(8), + event(16), + error(32) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "This 6 bit mask specifies the types of events to be + logged. By default all 6 bits are set to 1, indicating + that all types of events are to be logged. Setting any bit + to 0 removes an event type from this field and prevents + that type of event from being logged. Setting any bit to 1 + adds an event type to this field and enables that type of + event to be logged. " + ::= { nwAtEventFilterEntry 4 } + +nwAtEventFltrSeverity OBJECT-TYPE + SYNTAX INTEGER { + highest(1), + highmed(2), + highlow(3) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Specifies the level of severity an event must meet in + order to be logged. Controls the amount of event logging + by ignoring events of a lower priority than specified by + this filter value. `Highmed' ignores only events of the + lowest severity. `Highlow' logs all events highest priority + through lowest. `Highest' severity causes all events + except those of the highest severity to be ignored. + `Highmed' severity is the default setting which causes + only events of the lowest severity to be ignored. + `Highlow' severity logs all events, regardless of + severity." + ::= { nwAtEventFilterEntry 5 } + +nwAtEventFltrAction OBJECT-TYPE + SYNTAX INTEGER { + log(1), + trap(2), + log-trap(3) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Specifies how the events are to be logged. Logging to + the `log' stores the events in the event log table + (nwIpEventFltrAction). Logging to `trap' sends events + out through the trap mechanism." + ::= { nwAtEventFilterEntry 6 } + +-- Event Log Table +-- The Event Log Table contains the logged events. + +nwAtEventTable OBJECT-TYPE + SYNTAX SEQUENCE OF NwAtEventEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "This table contains an entry for each event that has + been logged." + ::= { nwAtEventLogTable 1 } + +nwAtEventEntry OBJECT-TYPE + SYNTAX NwAtEventEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "Each entry contains the information about an event that + has been logged to the event table." + INDEX { nwAtEventNumber } + ::= { nwAtEventTable 1 } + +NwAtEventEntry ::= + SEQUENCE { + nwAtEventNumber INTEGER, + nwAtEventTime TimeTicks, + nwAtEventType INTEGER, + nwAtEventSeverity INTEGER, + nwAtEventProtocol INTEGER, + nwAtEventIfNum INTEGER, + nwAtEventTextString OCTET STRING + } + +nwAtEventNumber OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "An ordinal value assigned to the event for which the + log entry exists. nwAtEvnetNumber is assigned so that + each event in the event log can be uniquely identified by + the value of nwAtEventNumber." + ::= { nwAtEventEntry 1 } + +nwAtEventTime OBJECT-TYPE + SYNTAX TimeTicks + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates the time at which the event was logged to the + event log" + ::= { nwAtEventEntry 2 } + +nwAtEventType OBJECT-TYPE + SYNTAX INTEGER { + misc(1), + timer(2), + rcv(4), + xmit(8), + event(16), + error(32) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates the type of event that was logged." + ::= { nwAtEventEntry 3 } + +nwAtEventSeverity OBJECT-TYPE + SYNTAX INTEGER { + highest(1), + highmed(2), + highlow(3) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates the severity that was assigned to this event." + ::= { nwAtEventEntry 4 } + +nwAtEventProtocol OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates the value of the Cabletron Routing Services + MIB nwRtgProtocolInstance or nwComponentInstance which + identifies the protocol or component that was involved in + the event." + ::= { nwAtEventEntry 5 } + +nwAtEventIfNum OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates the router port that was involved in the + event." + ::= { nwAtEventEntry 6 } + +nwAtEventTextString OBJECT-TYPE + SYNTAX OCTET STRING + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Contains the actual text string that was logged." + ::= { nwAtEventEntry 7 } + +-- AppleTalk Outbound Diagnostics Group + +nwAtNetDiagOutboundNetAddress OBJECT-TYPE + SYNTAX AtDdpNodeAddress + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The AppleTalk Network Address of a node with which the + diagnostic test will directly correspond." + ::= { nwAtNetDiagOutbound 1 } + +nwAtNetDiagOutboundPort OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + "An integer representing the port through which the + diagnostic test will broadcast or multicast packets." + ::= { nwAtNetDiagOutbound 2 } + +nwAtNetDiagOutboundTimeout OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + "An integer representing the number of seconds before a + diagnostic request will time out." + ::= { nwAtNetDiagOutbound 3 } + +nwAtNetDiagOutboundRetries OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + "An integer representing the number of times a request + will be repeated before failure." + ::= { nwAtNetDiagOutbound 4 } + +nwAtNetDiagOutboundATEchoType OBJECT-TYPE + SYNTAX INTEGER { + noAction(1), + sendEchoRequest(2), + other(3) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The type of echo diagnostic function to initiate. Upon + setting this to send EchoRequest (2), an echo request + will be initiated and the value will be set to noAction + (1)." + ::= { nwAtNetDiagOutbound 5 } + +nwAtNetDiagOutboundATEchoStatus OBJECT-TYPE + SYNTAX INTEGER { + inactive(1), + inProgress(2), + timeout(3), + success(4) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The current status of the echo diagnostic." + ::= { nwAtNetDiagOutbound 6 } + +nwAtNetDiagOutboundNBPEntityObject OBJECT-TYPE + SYNTAX AtName + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The entity object or wildcard object used in the + NBP lookup diagnostic." + ::= { nwAtNetDiagOutbound 7 } + +nwAtNetDiagOutboundNBPEntityType OBJECT-TYPE + SYNTAX AtName + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The entity type or wildcard type used in the + NBP lookup diagnostic." + ::= { nwAtNetDiagOutbound 8 } + +nwAtNetDiagOutboundNBPEntityZone OBJECT-TYPE + SYNTAX AtName + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The entity zone used in the NBP lookup diagnostic." + ::= { nwAtNetDiagOutbound 9 } + +nwAtNetDiagOutboundNBPType OBJECT-TYPE + SYNTAX INTEGER { + noAction(1), + localRequest(2), + lookupMcast(3), + lookupBcast(4), + lookupDirect(5), + bcastRequestBcast(6), + bcastRequestDirect(7), + forwardRequestBcast(8), + forwardRequestDirect(9), + other(10) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Specifies the type of outbound NBP diagnostic function + to initiate. Upon setting this value to any value other + than noAction (1) or other (10), the corresponding request + will be made and the value will be set to noAction (1)." + ::= { nwAtNetDiagOutbound 10 } + +nwAtNetDiagOutboundNBPStatus OBJECT-TYPE + SYNTAX INTEGER { + inactive(1), + inProgress(2), + done(3) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Indicates the current status of the outbound NBP + diagnostic." + ::= { nwAtNetDiagOutbound 11 } + +nwAtNetDiagOutboundRTMPType OBJECT-TYPE + SYNTAX INTEGER { + noAction(1), + sendRequest(2), + bcastRequest(3), + sendRDRequestSplitHorizon(4), + bcastRDRequestSplitHorizon(5), + sendRDRequestFullTable(6), + bcastRDRequestFullTable(7), + other(8) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The type of outbound RTMP diagnostic function to initiate. + Upon setting this value to a value other than noAction(1) + or other(8), the corresponding request will be initiated + and the value will be set to noAction(1)." + ::= { nwAtNetDiagOutbound 12 } + +nwAtNetDiagOutboundRTMPStatus OBJECT-TYPE + SYNTAX INTEGER { + inactive(1), + inProgress(2), + done(3) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The current status of the outbound RTMP diagnostic." + ::= { nwAtNetDiagOutbound 13 } + +nwAtNetDiagOutboundRTMPNetStart OBJECT-TYPE + SYNTAX AtNetworkNumber + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The start of the network range from the last successful + outbound RTMP request or route data request." + ::= { nwAtNetDiagOutbound 14 } + +nwAtNetDiagOutboundRTMPNetEnd OBJECT-TYPE + SYNTAX AtNetworkNumber + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The end of the network range from the last successful + outbound RTMP request or route data request." + ::= { nwAtNetDiagOutbound 15 } + +nwAtNetDiagOutboundZIPType OBJECT-TYPE + SYNTAX INTEGER { + noAction(1), + sendQuery(2), + bcastQuery(3), + sendGetZonesList(4), + sendGetLocalZones(5), + sendGetMyZone(6), + sendGetNetInfo(7), + bcastGetNetInfo(8), + other(9) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The type of outbound ZIP diagnostic function to initiate. + Upon setting this value to a value other than noAction(1) + or other(8), the corresponding request will be initiated + and the value will be set to noAction(1)." + ::= { nwAtNetDiagOutbound 16 } + +nwAtNetDiagOutboundZIPStatus OBJECT-TYPE + SYNTAX INTEGER { + inactive(1), + queryInProgress(2), + atpInProgress(3), + gniInProgress(4), + done(5) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The current status of the outbound ZIP diagnostic." + ::= { nwAtNetDiagOutbound 17 } + +nwAtNetDiagOutboundZIPQueryNet OBJECT-TYPE + SYNTAX AtNetworkNumber + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The start of the network range to send ZIP query for." + ::= { nwAtNetDiagOutbound 18 } + +nwAtNetDiagOutboundZIPQueryZone OBJECT-TYPE + SYNTAX AtName + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The first zone from the last successful ZIP query." + ::= { nwAtNetDiagOutbound 19 } + +nwAtNetDiagOutboundZIPGetNetInfoZone OBJECT-TYPE + SYNTAX AtName + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The zone name to be used in a ZIP get-net-info request + diagnostic." + ::= { nwAtNetDiagOutbound 20 } + +nwAtNetDiagOutboundZIPGetNetInfoNetStart OBJECT-TYPE + SYNTAX AtNetworkNumber + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The start of the network range from the last successful + ZIP get-net-info request." + ::= { nwAtNetDiagOutbound 21 } + +nwAtNetDiagOutboundZIPGetNetInfoNetEnd OBJECT-TYPE + SYNTAX AtNetworkNumber + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The end of the network range from the last successful + ZIP get-net-info request." + ::= { nwAtNetDiagOutbound 22 } + +nwAtNetDiagOutboundZIPGetNetInfoMulticast OBJECT-TYPE + SYNTAX OCTET STRING + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The data-link multicast address from the last successful + ZIP get-net-info request." + ::= { nwAtNetDiagOutbound 23 } + +nwAtNetDiagOutboundZIPGetNetInfoDefaultZone OBJECT-TYPE + SYNTAX AtName + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The default zone name from the last successful + ZIP get-net-info request." + ::= { nwAtNetDiagOutbound 24 } + + +-- AppleTalk Experimental Branch +-- The AppleTalk zone table has been placed under the +-- experimental branch because it is based on the appletalk +-- draft mib and shall be deprecated when the draft mib +-- becomes a standard. + + +-- The atportZoneTable stores information about the zones +-- associated with each port. The default zone for each +-- port is stored in the port's atportZoneDefault variable; +-- all other zones for the port are listed in this table. +-- If a port only has one zone, it should be stored in the +-- port's atportZoneDefault variable, and this table should +-- be empty. + +nwAtportZoneTable OBJECT-TYPE + SYNTAX SEQUENCE OF NwAtportZoneEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "The table of zone information for non-default + zones on ports." + ::= { nwRtrExperimental 1 } + +nwAtportZoneEntry OBJECT-TYPE + SYNTAX NwAtportZoneEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "An entry of zone information for a port." + INDEX { nwAtportZonePort, nwAtportZoneName } + ::= { nwAtportZoneTable 1 } + +NwAtportZoneEntry ::= SEQUENCE { + nwAtportZonePort INTEGER, + nwAtportZoneName AtName, + nwAtportZoneStatus INTEGER + } + +nwAtportZonePort OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "An integer representing the port to which this zone belongs. + The port identified by a particular value of this object + is the same port as identified by the same value of + nwAtportIndex." + ::= { nwAtportZoneEntry 1 } + +nwAtportZoneName OBJECT-TYPE + SYNTAX AtName + ACCESS read-only + STATUS mandatory + DESCRIPTION + "A zone name configured for the AppleTalk port referred to in + the corresponding entry of nwAtportZonePort. + When this value is changed in a router, the router must + send a zipNotify packet on the associated network." + ::= { nwAtportZoneEntry 2 } + +nwAtportZoneStatus OBJECT-TYPE + SYNTAX INTEGER { + valid(1), + invalid(2) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The status of this zone entry. + Setting this object to the value invalid(2) has the + effect of invalidating the corresponding entry in the + nwAtportZoneTable. That is, it effectively disassociates + the mapping identified with said entry. It is an + implementation-specific matter as to whether the agent + removes an invalidated entry from the table. + Accordingly, management stations must be prepared to + receive from agents tabular information corresponding + to entries not currently in use. Proper + interpretation of such entries requires examination + of the relevant nwAtportZoneStatus object." + ::= { nwAtportZoneEntry 3 } + +-- + +-- IP Hosts-to-Media Table +-- This table serves to supplement the MIB-2 Net-To-Media Table. It +-- supports both non-WAN interfaces and logical WAN interfaces and the +-- circuits under them. In addition to the ifIndex, AtNetworkNumber, and +-- PhysAddress mapping, each address translation includes the framing +-- required to converse with the host, the platform's logical port number, +-- and the circuit identifier associated with the mapping if applicable. + + +nwAtHostMapTable OBJECT-TYPE + SYNTAX SEQUENCE OF NwAtHostMapEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "The Ip Address translation table used for mapping an IP + address to physical address, framing, port and circuit + identifier, if applicable." + ::= { nwAtHostsToMedia 1 } + +nwAtHostMapEntry OBJECT-TYPE + SYNTAX NwAtHostMapEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "Each entry contains one AtNetworkNumber to 'physical' + address equivalence, including a circuit identifier + if applicable. Also provided is the framing and + port number required to converse with this host." + INDEX { nwAtHostMapIfIndex, nwAtHostMapAtAddr } + ::= { nwAtHostMapTable 1 } + + NwAtHostMapEntry ::= + SEQUENCE { + nwAtHostMapIfIndex INTEGER, + nwAtHostMapAtAddr AtDdpNodeAddress, + nwAtHostMapPhysAddr PhysAddress, + nwAtHostMapType INTEGER, + nwAtHostMapCircuitID INTEGER, + nwAtHostMapFraming INTEGER, + nwAtHostMapPortNumber INTEGER + } + +nwAtHostMapIfIndex OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "This is the primary (major) index into the HostMap + table. This number corresponds to the index into the + MIB-2 Interfaces Group which describes the IP router + port for which the entry exists." + ::= { nwAtHostMapEntry 1 } + + +nwAtHostMapAtAddr OBJECT-TYPE + SYNTAX AtDdpNodeAddress + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The AtDdpNodeAddress corresponding to the + media-dependent 'physical' address and circuit + identifier (if applic)." + ::= { nwAtHostMapEntry 2 } + +nwAtHostMapPhysAddr OBJECT-TYPE + SYNTAX PhysAddress + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The media-dependent 'physical' address. The value of + this object is 0 for entries indicating native-wan(8) + framing." + ::= { nwAtHostMapEntry 3 } + +nwAtHostMapType OBJECT-TYPE + SYNTAX INTEGER { + other(1), + invalid(2), + dynamic(3), + static(4), + inactive(5) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Setting this object to the value invalid(2) has + the effect of invalidating the corresponding entry + in the nwAtHostMapTable. That is, it effectively + dissasociates the circuit identified with said + entry from the mapping identified with said entry. + It is an implementation-specific matter as to + whether the agent removes an invalidated entry + from the table. Accordingly, management stations + must be prepared to receive tabular information + from agents that corresponds to entries not + currently in use. Proper interpretation of such + entries requires examination of the relevant + nwAtHostMapType object." + + ::= { nwAtHostMapEntry 4 } + +nwAtHostMapCircuitID OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The identifier for the virtual circuit present on the + interface. On an interface configured for Frame Relay, + this number is the DLCI for the IP Address at the end of + the circuit. For non-WAN interfaces, the value of this + object is zero." + ::= { nwAtHostMapEntry 5 } + +nwAtHostMapFraming OBJECT-TYPE + SYNTAX INTEGER { -- valid media types + other(1), -- experimental + ethernet(2), -- ethernet + snap(3), -- enet,fddi,and token ring + nativewan(8), -- wan media types + encapenet(9), -- wan media types + encapenetsnap(11), -- wan media types + encapfddisnap(16), -- wan media types + canonical(17) -- special, tbd + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Specifies the framing type required to converse with the + host for which this entry exists." + ::= { nwAtHostMapEntry 6 } + +nwAtHostMapPortNumber OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The unique value for the logical port number. It's value + ranges between 1 and a maximum value which is dependent on + both the number of interfaces in the system and the number + of circuits present on interfaces which are of WAN type." + ::= { nwAtHostMapEntry 7 } + +END |