diff options
Diffstat (limited to 'MIBS/enterasys/CTINB2-MIB')
| -rw-r--r-- | MIBS/enterasys/CTINB2-MIB | 212 |
1 files changed, 212 insertions, 0 deletions
diff --git a/MIBS/enterasys/CTINB2-MIB b/MIBS/enterasys/CTINB2-MIB new file mode 100644 index 0000000..ddac373 --- /dev/null +++ b/MIBS/enterasys/CTINB2-MIB @@ -0,0 +1,212 @@ +CTINB2-MIB DEFINITIONS ::= BEGIN + + -- ctinb2-mib.txt + -- Revision: 00.00.02 + -- Date: October 23, 1998 + + -- Cabletron Systems, Inc. + -- 35 Industrial Way, P.O. Box 5005 + -- Rochester, NH 03867-0505 + -- (603) 332-9400 + -- support@ctron.com + + -- This module provides authoritative definitions for Cabletron's + -- INB2 MIB. + -- + -- This module will be extended, as needed. + + -- Cabletron Systems reserves the right to make changes in + -- specification and other information contained in this document + -- without prior notice. The reader should consult Cabletron Systems + -- to determine whether any such changes have been made. + -- + -- In no event shall Cabletron Systems be liable for any incidental, + -- indirect, special, or consequential damages whatsoever (including + -- but not limited to lost profits) arising out of or related to this + -- document or the information contained in it, even if Cabletron + -- Systems has been advised of, known, or should have known, the + -- possibility of such damages. + -- + -- Cabletron grants vendors, end-users, and other interested parties + -- a non-exclusive license to use this Specification in connection + -- with the management of Cabletron products. + + -- Copyright September 98 Cabletron Systems + +IMPORTS + OBJECT-TYPE FROM RFC-1212 + ctINBinfo2 FROM CTRON-MIB-NAMES ; + +-- +-- The Utilization group +-- + + ctInbUtil OBJECT IDENTIFIER ::= { ctINBinfo2 1 } + + ctInbUtilInterval OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The length of the sampling interval in seconds used for all INB + utilization measurements and calculations." + DEFVAL { 1 } + ::= { ctInbUtil 1 } + + + ctInbUtilTable OBJECT-TYPE + SYNTAX SEQUENCE OF CtInbUtilEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "A list of byte counts and absolute utilization percentages reflecting + data transferred via the INB during the last sampling interval." + ::= { ctInbUtil 2 } + + ctInbUtilEntry OBJECT-TYPE + SYNTAX CtInbUtilEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "Byte counts and utilization percentages reflecting data transferred + from a source module to a destination module via the INB." + INDEX { ctInbUtilSrcSlot, ctInbUtilDestSlot } + ::= { ctInbUtilTable 1 } + + CtInbUtilEntry ::= + SEQUENCE { + ctInbUtilSrcSlot + INTEGER, + ctInbUtilDestSlot + INTEGER, + ctInbUtilHiByteCountA + INTEGER, + ctInbUtilLoByteCountA + INTEGER, + ctInbUtilHiByteCountB + INTEGER, + ctInbUtilLoByteCountB + INTEGER, + ctInbUtilAbsoluteA + INTEGER, + ctInbUtilAbsoluteB + INTEGER, + ctInbUtilAbsoluteTotal + INTEGER + } + + ctInbUtilSrcSlot OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The chassis slot number containing the module from which bytes are + transmitted onto the INB." + ::= { ctInbUtilEntry 1 } + + ctInbUtilDestSlot OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The chassis slot number containing the module to which bytes are + transmitted across the INB." + ::= { ctInbUtilEntry 2 } + + ctInbUtilHiByteCountA OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The high-order 32 bits of the 64-bit entity which represents the number + of bytes transferred from the source module to the destination module + across INB channel A during the last sampling interval. This 64-bit + byte count may be calculated as: + ctInbUtilByteCountA = (ctInbUtilHiByteCountA * 2**32) + ctInbUtilLoByteCountA " + ::= { ctInbUtilEntry 3 } + + ctInbUtilLoByteCountA OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The low-order 32 bits of the 64-bit entity which represents the number + of bytes transferred from the source module to the destination module + across INB channel A during the last sampling interval. This 64-bit + byte count may be calculated as: + ctInbUtilByteCountA = (ctInbUtilHiByteCountA * 2**32) + ctInbUtilLoByteCountA " + ::= { ctInbUtilEntry 4 } + + ctInbUtilHiByteCountB OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The high-order 32 bits of the 64-bit entity which represents the number + of bytes transferred from the source module to the destination module + across INB channel B during the last sampling interval. This 64-bit + byte count may be calculated as: + ctInbUtilByteCountB = (ctInbUtilHiByteCountB * 2**32) + ctInbUtilLoByteCountB " + ::= { ctInbUtilEntry 5 } + + ctInbUtilLoByteCountB OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The low-order 32 bits of the 64-bit entity which represents the number + of bytes transferred from the source module to the destination module + across INB channel B during the last sampling interval. This 64-bit + byte count may be calculated as: + ctInbUtilByteCountB = (ctInbUtilHiByteCountB * 2**32) + ctInbUtilLoByteCountB " + ::= { ctInbUtilEntry 6 } + + ctInbUtilAbsoluteA OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The percentage of absolute utilization of INB channel A by data transferred + from the source module to the destination module during the last sampling + interval. This percentage is calculated by dividing ctInbUtilByteCountA + (a 64-bit entity which is calculated as specified above) by + the theoretical maximum number of bytes that could have traversed INB + channel A during the interval. Note that in order to increase precision, + the value of this object is the actual percentage multiplied by 100 (that + is, to determine the actual percentage, divide the value of this object by + 100)." + ::= { ctInbUtilEntry 7 } + + ctInbUtilAbsoluteB OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The percentage of absolute utilization of INB channel B by data transferred + from the source module to the destination module during the last sampling + interval. This percentage is calculated by dividing ctInbUtilByteCountB + (a 64-bit entity which is calculated as specified above) by + the theoretical maximum number of bytes that could have traversed INB + channel B during the interval. Note that in order to increase precision, + the value of this object is the actual percentage multiplied by 100 (that + is, to determine the actual percentage, divide the value of this object by + 100)." + ::= { ctInbUtilEntry 8 } + + ctInbUtilAbsoluteTotal OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The percentage of absolute utilization of the total INB by data transferred + from the source module to the destination module during the last sampling + interval. This percentage is calculated by dividing the sum of + ctInbUtilByteCountA and ctInbUtilByteCountB by the theoretical maximum number + of bytes that could have traversed both INB channels during the interval. + Note that in order to increase precision, the value of this object is the + actual percentage multiplied by 100 (that is, to determine the actual + percentage, divide the value of this object by 100)." + ::= { ctInbUtilEntry 9 } + + +END |