diff options
Diffstat (limited to 'MIBS/enterasys/CT-ELS10-MIB')
| -rw-r--r-- | MIBS/enterasys/CT-ELS10-MIB | 3504 |
1 files changed, 3504 insertions, 0 deletions
diff --git a/MIBS/enterasys/CT-ELS10-MIB b/MIBS/enterasys/CT-ELS10-MIB new file mode 100644 index 0000000..dcb6e2a --- /dev/null +++ b/MIBS/enterasys/CT-ELS10-MIB @@ -0,0 +1,3504 @@ +CT-ELS10-MIB DEFINITIONS ::= BEGIN + +-- SMC-MIB + + -- Copyright 1999 Standard Microsystems Corporation. All Rights Reserved. + -- Reproduction of this document is authorized on condition that this + -- copyright notice is included. This Standard Microsystems Corporation + -- SNMP Management Information Base Specification (Specification) embodies + -- Standard Microsystems Corporation's proprietary intellectual property. + -- Standard Microsystems Corporation retains all title and ownership in + -- the Specification, including any revisions. + + -- It is Standard Microsystems Corporation's intent to encourage the + -- widespread use of this Specification in connection with the management + -- of Standard Microsystems Corporation products. Standard Microsystems + -- Corporation grants vendors, end-users, and other interested parties a + -- non-exclusive license to use this Specification in connection with the + -- management of Standard Microsystems Corporation products. + + -- This Specification is supplied "AS IS," and Standard Microsystems + -- Corporation makes no warranty, either express or implied, as to the use, + -- operation, condition, or performance of the Specification. + +IMPORTS + + OBJECT-TYPE + FROM RFC-1212 + + DisplayString, sysObjectID, ifOutDiscards, ifInErrors, ifOutErrors, + PhysAddress + FROM RFC1213-MIB + + Counter, Gauge, IpAddress, TimeTicks, enterprises + FROM RFC1155-SMI + + dot1dStpDesignatedRoot, dot1dStpRootCost, dot1dStpRootPort, + dot1dStpMaxAge, dot1dStpHelloTime, dot1dStpForwardDelay, + dot1dStpPortDesignatedRoot, dot1dStpPortDesignatedBridge, + dot1dStpPortDesignatedCost, dot1dStpPortDesignatedPort, + dot1dStpPortState + FROM BRIDGE-MIB + + TRAP-TYPE + FROM RFC-1215; + + + + -- mgmt OBJECT IDENTIFIER ::= { iso org(3) dod(6) internet(1) mgmt(2) } + -- mib OBJECT IDENTIFIER ::= { mgmt 1 } + -- directory OBJECT IDENTIFIER ::= { internet 1 } + -- experimental OBJECT IDENTIFIER ::= { internet 3 } + -- private OBJECT IDENTIFIER ::= { internet 4 } + -- enterprises OBJECT IDENTIFIER ::= { private 1 } + + sigma OBJECT IDENTIFIER ::= { enterprises 97 } + sys OBJECT IDENTIFIER ::= { sigma 1 } + els10-27 OBJECT IDENTIFIER ::= { sigma 9 } + els10-27hw OBJECT IDENTIFIER ::= { els10-27 1 } + els10-27sw OBJECT IDENTIFIER ::= { els10-27 2 } + els10-27admin OBJECT IDENTIFIER ::= { els10-27 3 } + els10-27swdis OBJECT IDENTIFIER ::= { els10-27 4 } + els10-27addr OBJECT IDENTIFIER ::= { els10-27 5 } + els10-27if OBJECT IDENTIFIER ::= { els10-27 6 } + els10-27dot3 OBJECT IDENTIFIER ::= { els10-27 7 } + els10-27uart OBJECT IDENTIFIER ::= { els10-27 8 } + els10-27debug OBJECT IDENTIFIER ::= { els10-27 10 } + els10-27lpbk OBJECT IDENTIFIER ::= { els10-27 11 } + els10-27proto OBJECT IDENTIFIER ::= { els10-27 12 } + els10-27trunk OBJECT IDENTIFIER ::= { els10-27 13 } + els10-27workgroup OBJECT IDENTIFIER ::= { els10-27 14 } + els10-27trapMgt OBJECT IDENTIFIER ::= { els10-27 15 } + els10-27pingMgt OBJECT IDENTIFIER ::= { els10-27 16 } + els10-27traceMgt OBJECT IDENTIFIER ::= { els10-27 17 } + els10-27volmirrorgroup OBJECT IDENTIFIER ::= { els10-27 19 } + els10-27VlanBridgeConfig OBJECT IDENTIFIER ::= { els10-27 20 } + els10-27volipmgroup OBJECT IDENTIFIER ::= { els10-27 21 } + els10-27voligmpgroup OBJECT IDENTIFIER ::= { els10-27 22 } + els10-27FlowControlCtl OBJECT IDENTIFIER ::= { els10-27 23 } + + + + -- SMC MIB + -- System group + + sysID OBJECT-TYPE + SYNTAX INTEGER { + els10-27-bridge(7) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + " " + ::= { sys 1 } + + sysReset OBJECT-TYPE + SYNTAX TimeTicks + ACCESS read-write + STATUS mandatory + DESCRIPTION + " " + ::= { sys 2 } + + sysTrapPort OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + " " + ::= { sys 6 } + + + -- HW Configuration Group + + + els10-27hwDiagCode OBJECT-TYPE + SYNTAX OCTET STRING + ACCESS read-only + STATUS mandatory + DESCRIPTION + " " + ::= { els10-27hw 1 } + + els10-27hwManufData OBJECT-TYPE + SYNTAX OCTET STRING + ACCESS read-only + STATUS mandatory + DESCRIPTION + " " + ::= { els10-27hw 2 } + + els10-27hwPortCount OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + " " + ::= { els10-27hw 3 } + + els10-27hwPortTable OBJECT-TYPE + SYNTAX SEQUENCE OF LxhwPortEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + " " + ::= { els10-27hw 4 } + + els10-27hwPortEntry OBJECT-TYPE + SYNTAX LxhwPortEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + " " + INDEX { els10-27hwPortIndex } + ::= { els10-27hwPortTable 1 } + + LxhwPortEntry ::= SEQUENCE { + els10-27hwPortIndex + INTEGER, + els10-27hwPortType + INTEGER, + els10-27hwPortSubType + INTEGER, + els10-27hwPortDiagPassed + INTEGER, + els10-27hwAddr + OCTET STRING + } + + els10-27hwPortIndex OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + " " + ::= { els10-27hwPortEntry 1 } + + els10-27hwPortType OBJECT-TYPE + SYNTAX INTEGER { + port-csma(1), + port-uart(6), + port-none(255) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + " " + ::= { els10-27hwPortEntry 2 } + + els10-27hwPortSubType OBJECT-TYPE + SYNTAX INTEGER { csmacd-tpx(13), + csmacd-100-tpx(16), + csmacd-100-fx(17), + uart-female-9pin(80), + no-information(255) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + " " + ::= { els10-27hwPortEntry 3 } + + els10-27hwPortDiagPassed OBJECT-TYPE + SYNTAX INTEGER { diag-passed(1), diag-failed(2) } + ACCESS read-only + STATUS mandatory + DESCRIPTION + " " + ::= { els10-27hwPortEntry 4 } + + els10-27hwAddr OBJECT-TYPE + SYNTAX OCTET STRING + ACCESS read-only + STATUS mandatory + DESCRIPTION + " " + ::= { els10-27hwPortEntry 5 } + + + els10-27hwUpLink OBJECT-TYPE + SYNTAX INTEGER { true(1), false(2) } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Specifies whether the Up-Link I/O module is existed" + ::= { els10-27hw 5 } + + els10-27hwUpLinkManufData OBJECT-TYPE + SYNTAX OCTET STRING + ACCESS read-only + STATUS mandatory + DESCRIPTION + "This is a 32-byte array which contains the part number, + serial number, and hardware revision level of the Up-Link + I/O module. This array is valid only when the els10-27hwUplink + is true. If els10-27hwUplink is false, it returns an error" + ::= { els10-27hw 6 } + + + -- LXSW Configuration Group + + els10-27swNumber OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + " " + ::= { els10-27sw 1 } + + els10-27swFilesetTable OBJECT-TYPE + SYNTAX SEQUENCE OF LxswFilesetEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + " " + ::= { els10-27sw 2 } + + els10-27swFilesetEntry OBJECT-TYPE + SYNTAX LxswFilesetEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + " " + INDEX { els10-27swIndex } + ::= { els10-27swFilesetTable 1 } + + LxswFilesetEntry ::= SEQUENCE { + els10-27swIndex + INTEGER, + els10-27swDesc + DisplayString, + els10-27swCount + INTEGER, + els10-27swType + OCTET STRING, + els10-27swSizes + OCTET STRING, + els10-27swStarts + OCTET STRING, + els10-27swBases + OCTET STRING, + els10-27swFlashBank + INTEGER + } + + els10-27swIndex OBJECT-TYPE + SYNTAX INTEGER { + currently-executing(1), + next-boot(2) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + " " + ::= { els10-27swFilesetEntry 1 } + + els10-27swDesc OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + " " + ::= { els10-27swFilesetEntry 2 } + + els10-27swCount OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + " " + ::= { els10-27swFilesetEntry 3 } + + els10-27swType OBJECT-TYPE + SYNTAX OCTET STRING + ACCESS read-only + STATUS mandatory + DESCRIPTION + " " + ::= { els10-27swFilesetEntry 4 } + + els10-27swSizes OBJECT-TYPE + SYNTAX OCTET STRING + ACCESS read-only + STATUS mandatory + DESCRIPTION + " " + ::= { els10-27swFilesetEntry 5 } + + els10-27swStarts OBJECT-TYPE + SYNTAX OCTET STRING + ACCESS read-only + STATUS mandatory + DESCRIPTION + " " + ::= { els10-27swFilesetEntry 6 } + + els10-27swBases OBJECT-TYPE + SYNTAX OCTET STRING + ACCESS read-only + STATUS mandatory + DESCRIPTION + " " + ::= { els10-27swFilesetEntry 7 } + + els10-27swFlashBank OBJECT-TYPE + SYNTAX INTEGER { + first-bank(1), + second-bank(2) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + " " + ::= { els10-27swFilesetEntry 8 } + + + + -- LXADMIN Group + + els10-27adminFatalErr OBJECT-TYPE + SYNTAX OCTET STRING + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Information about last reset: + First byte, cause of reset, values: + 00: power failure + 01: WatchDog Timeout + 02: Software Reset + 03: NMS Shutdown + 04-255: Fatal Error + + Second byte, Hw/Sw component that failed + + Remaining bytes, description of fault." + ::= { els10-27admin 1 } + + els10-27adminAnyPass OBJECT-TYPE + SYNTAX OCTET STRING + ACCESS read-write + STATUS mandatory + DESCRIPTION + " " + ::= { els10-27admin 2 } + + els10-27adminGetPass OBJECT-TYPE + SYNTAX OCTET STRING + ACCESS read-write + STATUS mandatory + DESCRIPTION + " " + ::= { els10-27admin 3 } + + els10-27adminNMSIPAddr OBJECT-TYPE + SYNTAX IpAddress + ACCESS read-write + STATUS mandatory + DESCRIPTION + " " + ::= { els10-27admin 4 } + + els10-27adminStorageFailure OBJECT-TYPE + SYNTAX INTEGER { true(1), false(2) } + ACCESS read-only + STATUS mandatory + DESCRIPTION + " " + ::= { els10-27admin 7 } + + els10-27adminAuthenticationFailure OBJECT-TYPE + SYNTAX IpAddress + ACCESS read-only + STATUS mandatory + DESCRIPTION + " " + ::= { els10-27admin 8 } + + els10-27adminNAMReceiveCongests OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + " " + ::= { els10-27admin 10 } + + els10-27adminArpEntries OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + " " + ::= { els10-27admin 11 } + + els10-27adminArpStatics OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + " " + ::= { els10-27admin 12 } + + els10-27adminArpOverflows OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + " " + ::= { els10-27admin 13 } + + els10-27adminIpEntries OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + " " + ::= { els10-27admin 14 } + + els10-27adminIpStatics OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + " " + ::= { els10-27admin 15 } + + els10-27adminStaticPreference OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + " " + ::= { els10-27admin 16 } + + els10-27adminRipPreference OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + " " + ::= { els10-27admin 17 } + + els10-27adminRipRouteDiscards OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + " " + ::= { els10-27admin 18 } + + els10-27adminRebootConfig OBJECT-TYPE + SYNTAX INTEGER { + no-change(1), + tftp-config(2), + revert-to-defaults(3) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + " " + ::= { els10-27admin 19 } + + els10-27adminDisableButton OBJECT-TYPE + SYNTAX INTEGER { true(1), false(2) } + ACCESS read-write + STATUS mandatory + DESCRIPTION + " " + ::= { els10-27admin 21 } + + els10-27adminButtonSelection OBJECT-TYPE + SYNTAX INTEGER { + led-any-activity(1), + led-rx-activity(2), + led-tx-activity(3), + led-any-collision(4), + led-programmed(5), + led-duplex(6), + led-speed(7), + led-mirror(8) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + " " + ::= { els10-27admin 22 } + + els10-27adminLEDProgramOption OBJECT-TYPE + SYNTAX INTEGER { + program-led-any-error(1) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + " " + ::= { els10-27admin 23 } + + -- Software Distribution Group + + els10-27swdisDesc OBJECT-TYPE + SYNTAX OCTET STRING + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The description (0-32 bytes) of the software set currently + being downloaded, or a description of the software set last + downloaded since the FN1026 booted." + ::= { els10-27swdis 1 } + + els10-27swdisAccess OBJECT-TYPE + SYNTAX INTEGER { + protected(1), + any-software(2) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The version of software that may be downloaded. Attempts to + download other versions of software will be rejected. The + value for swdisAccess is embedded within the software files + that are to be distributed via TFTP. Its value may be + derived from the names of the software files. the NMS operator + may wish to use the following special values: + protected (1) No software downloads will be accepted + any-software (2) A software download of any version of new + software will be accepted - this is the factory default" + ::= { els10-27swdis 2 } + + els10-27swdisWriteStatus OBJECT-TYPE + SYNTAX INTEGER { + in-progress(1), + success(2), + config-error(3), + flash-error(4), + config-and-flash-errors(5) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The status of the erase/write operation." + ::= { els10-27swdis 3 } + + els10-27swdisConfigIp OBJECT-TYPE + SYNTAX IpAddress + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The IP address of the NMS (i.e., any IP host) that is allowed + to use TFTP to send/retrieve the configuration file of the + FN1026. A value of 0.0.0.0 (which is the factory specified + default) prevents any NMS from obtaining access, while a + value of 255.255.255.255 gives every NMS permission." + ::= { els10-27swdis 4 } + + els10-27swdisConfigRetryTime OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The number of seconds that the FN1026 will wait for an + acknowledgment before it retransmits an unacknowledged TFTP + data block. The factory specified default is 5 seconds." + ::= { els10-27swdis 5 } + + els10-27swdisConfigTotalTimeout OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The number of seconds that the FN1026 will wait for an + acknowledgment to a data block before it cancels a TFTP + session. The factory specified default is 25 seconds." + ::= { els10-27swdis 6 } + + -- Address Configuration + + els10-27addrStatics OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + " " + ::= { els10-27addr 1 } + + els10-27addrDynamics OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + " " + ::= { els10-27addr 2 } + + els10-27addrDynamicMax OBJECT-TYPE + SYNTAX Gauge + ACCESS read-write + STATUS mandatory + DESCRIPTION + " " + ::= { els10-27addr 3 } + + els10-27addrDynamicOverflows OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + " " + ::= { els10-27addr 4 } + + els10-27addrFlags OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + " " + ::= { els10-27addr 5 } + + els10-27addrMAC OBJECT-TYPE + SYNTAX OCTET STRING + ACCESS read-write + STATUS mandatory + DESCRIPTION + " " + ::= { els10-27addr 6 } + + els10-27addrPort OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + " " + ::= { els10-27addr 7 } + + + els10-27addrOperation OBJECT-TYPE + SYNTAX INTEGER { + read-random(1), + read-next(2), + update(4), + delete(5), + read-block(6) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + " " + ::= { els10-27addr 8 } + + els10-27addrIndex OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + " " + ::= { els10-27addr 9 } + + els10-27addrNext OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + " " + ::= { els10-27addr 10 } + + + els10-27addrBlockSize OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + " " + ::= { els10-27addr 19 } + + els10-27addrBlock OBJECT-TYPE + SYNTAX OCTET STRING + ACCESS read-write + STATUS mandatory + DESCRIPTION + " " + ::= { els10-27addr 20 } + + + -- Interfaces Group + + + els10-27ifTable OBJECT-TYPE + SYNTAX SEQUENCE OF LxifEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + " " + ::= { els10-27if 1 } + + els10-27ifEntry OBJECT-TYPE + SYNTAX LxifEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + " " + INDEX { els10-27ifIndex } + ::= { els10-27ifTable 1 } + + LxifEntry ::= SEQUENCE { + els10-27ifIndex + INTEGER, + ---els10-27ifRxCnt + --- INTEGER, + ---els10-27ifTxCnt + --- INTEGER, + els10-27ifThreshold + INTEGER, + els10-27ifThresholdTime + INTEGER, + els10-27ifRxQueueThresh + INTEGER, + els10-27ifRxQueueThreshTime + INTEGER, + els10-27ifTxStormCnt + INTEGER, + els10-27ifTxStormTime + TimeTicks, + els10-27ifFunction + INTEGER, + els10-27ifRxHwFCSs + Counter, + els10-27ifRxQueues + Counter, + els10-27ifStatisticsTime + TimeTicks, + els10-27ifForwardedChars + Counter, + els10-27ifDescr + DisplayString, + els10-27ifGoodRxFrames + Counter, + els10-27ifGoodTxFrames + Counter + } + + els10-27ifIndex OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + " " + ::= { els10-27ifEntry 1 } + +--- els10-27ifRxCnt OBJECT-TYPE +--- SYNTAX INTEGER +--- ACCESS read-only +--- STATUS mandatory +--- DESCRIPTION +--- " " +--- ::= { els10-27ifEntry 2 } + +--- els10-27ifTxCnt OBJECT-TYPE +--- SYNTAX INTEGER +--- ACCESS read-only +--- STATUS mandatory +--- DESCRIPTION +--- " " +--- ::= { els10-27ifEntry 3 } + + els10-27ifThreshold OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + " " + ::= { els10-27ifEntry 4 } + + els10-27ifThresholdTime OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + " " + ::= { els10-27ifEntry 5 } + + els10-27ifRxQueueThresh OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + " " + ::= { els10-27ifEntry 6 } + + els10-27ifRxQueueThreshTime OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + " " + ::= { els10-27ifEntry 7 } + + els10-27ifTxStormCnt OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + " " + ::= { els10-27ifEntry 8 } + + els10-27ifTxStormTime OBJECT-TYPE + SYNTAX TimeTicks + ACCESS read-write + STATUS mandatory + DESCRIPTION + " " + ::= { els10-27ifEntry 9 } + + els10-27ifFunction OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + " " + ::= { els10-27ifEntry 16 } + + els10-27ifRxHwFCSs OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + " " + ::= { els10-27ifEntry 18 } + + els10-27ifRxQueues OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + " " + ::= { els10-27ifEntry 19 } + + els10-27ifStatisticsTime OBJECT-TYPE + SYNTAX TimeTicks + ACCESS read-only + STATUS mandatory + DESCRIPTION + " " + ::= { els10-27ifEntry 27 } + + els10-27ifForwardedChars OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + " " + ::= { els10-27ifEntry 28 } + + els10-27ifDescr OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-write + STATUS mandatory + DESCRIPTION + " " + ::= { els10-27ifEntry 29 } + + els10-27ifGoodRxFrames OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + " " + ::= { els10-27ifEntry 30 } + + els10-27ifGoodTxFrames OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + " " + ::= { els10-27ifEntry 31 } + + -- Dot3 Group + + els10-27dot3Table OBJECT-TYPE + SYNTAX SEQUENCE OF Lxdot3Entry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + " " + ::= { els10-27dot3 1 } + + els10-27dot3Entry OBJECT-TYPE + SYNTAX Lxdot3Entry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + " " + INDEX { els10-27dot3Index } + ::= { els10-27dot3Table 1 } + + + Lxdot3Entry ::= SEQUENCE { + els10-27dot3Index + INTEGER, + els10-27dot3TPLinkOK + INTEGER, + els10-27dot3LedOn + INTEGER, + els10-27dot3RxCollisions + Counter, + els10-27dot3RxRunts + Counter, + els10-27dot3RxLateColls + Counter, + els10-27dot3TxJabbers + Counter, + els10-27dot3TxBabbles + Counter, + els10-27dot3TxCollisions + Counter, + els10-27dot3SpeedSelection + INTEGER, + els10-27dot3DuplexSelection + INTEGER + } + + els10-27dot3Index OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + " " + ::= { els10-27dot3Entry 1 } + + els10-27dot3TPLinkOK OBJECT-TYPE + SYNTAX INTEGER { true(1), false(2) } + ACCESS read-only + STATUS mandatory + DESCRIPTION + " " + ::= { els10-27dot3Entry 2 } + + els10-27dot3LedOn OBJECT-TYPE + SYNTAX INTEGER { led-on(1), led-off(2) } + ACCESS read-only + STATUS mandatory + DESCRIPTION + " " + ::= { els10-27dot3Entry 3 } + + els10-27dot3RxCollisions OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + " " + ::= { els10-27dot3Entry 4 } + + els10-27dot3RxRunts OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + " " + ::= { els10-27dot3Entry 5 } + + els10-27dot3RxLateColls OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + " " + ::= { els10-27dot3Entry 6 } + + els10-27dot3TxJabbers OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + " " + ::= { els10-27dot3Entry 7 } + + els10-27dot3TxBabbles OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + " " + ::= { els10-27dot3Entry 8 } + + els10-27dot3TxCollisions OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + " " + ::= { els10-27dot3Entry 9 } + + els10-27dot3SpeedSelection OBJECT-TYPE + SYNTAX INTEGER { speed-10mbit(1), speed-100mbit(2), speed-auto(3) } + ACCESS read-write + STATUS mandatory + DESCRIPTION + " " + ::= { els10-27dot3Entry 13 } + + els10-27dot3DuplexSelection OBJECT-TYPE + SYNTAX INTEGER { duplex-auto(1), duplex-half(2), duplex-full(3) } + ACCESS read-write + STATUS mandatory + DESCRIPTION + " " + ::= { els10-27dot3Entry 14 } + + -- UART Interface Group + + els10-27uartTable OBJECT-TYPE + SYNTAX SEQUENCE OF LxuartEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + " " + ::= { els10-27uart 1 } + + els10-27uartEntry OBJECT-TYPE + SYNTAX LxuartEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + " " + INDEX { els10-27uartIndex } + ::= { els10-27uartTable 1 } + + LxuartEntry ::= SEQUENCE { + els10-27uartIndex + INTEGER, + els10-27uartBaud + INTEGER, + els10-27uartAlignmentErrors + Counter, + els10-27uartOverrunErrors + Counter + } + + els10-27uartIndex OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + " " + ::= { els10-27uartEntry 1 } + + els10-27uartBaud OBJECT-TYPE + SYNTAX INTEGER { + b2400-baud(3), + b4800-baud(4), + b9600-baud(5), + b19200-baud(6) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + " " + ::= { els10-27uartEntry 2 } + + els10-27uartAlignmentErrors OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + " " + ::= { els10-27uartEntry 3 } + + els10-27uartOverrunErrors OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + " " + ::= { els10-27uartEntry 4 } + + -- Debug Command Group + + els10-27debugStringID OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + " " + ::= { els10-27debug 1 } + + els10-27debugString OBJECT-TYPE + SYNTAX OCTET STRING + ACCESS read-only + STATUS mandatory + DESCRIPTION + " " + ::= { els10-27debug 2 } + + els10-27debugTable OBJECT-TYPE + SYNTAX SEQUENCE OF LxdebugEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + " " + ::= { els10-27debug 3 } + + els10-27debugEntry OBJECT-TYPE + SYNTAX LxdebugEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + " " + INDEX { els10-27debugIndex } + ::= { els10-27debugTable 1 } + + LxdebugEntry ::= SEQUENCE { + els10-27debugIndex + INTEGER, + els10-27debugOperation + INTEGER, + els10-27debugBase + INTEGER, + els10-27debugLength + INTEGER, + els10-27debugData + OCTET STRING + } + + els10-27debugIndex OBJECT-TYPE + SYNTAX INTEGER { + debug-nam(1) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + " " + ::= { els10-27debugEntry 1 } + + els10-27debugOperation OBJECT-TYPE + SYNTAX INTEGER { + examine(1), + modify(2) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + " " + ::= { els10-27debugEntry 2 } + + els10-27debugBase OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + " " + ::= { els10-27debugEntry 3 } + + els10-27debugLength OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + " " + ::= { els10-27debugEntry 4 } + + els10-27debugData OBJECT-TYPE + SYNTAX OCTET STRING + ACCESS read-write + STATUS mandatory + DESCRIPTION + " " + ::= { els10-27debugEntry 5 } + + -- Loopback Command Group + + els10-27lpbkTable OBJECT-TYPE + SYNTAX SEQUENCE OF LxlpbkEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + " " + ::= { els10-27lpbk 1 } + + els10-27lpbkEntry OBJECT-TYPE + SYNTAX LxlpbkEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + " " + INDEX { els10-27lpbkIndex } + ::= { els10-27lpbkTable 1 } + + LxlpbkEntry ::= SEQUENCE { + els10-27lpbkIndex + INTEGER, + els10-27lpbkOperation + INTEGER, + els10-27lpbkDestAddr + OCTET STRING, + els10-27lpbkPktNum + INTEGER, + els10-27lpbkInterval + TimeTicks, + els10-27lpbkPktLength + INTEGER, + els10-27lpbkIncrements + INTEGER, + els10-27lpbkGoods + Counter, + els10-27lpbkErrorNoReceives + Counter, + els10-27lpbkErrorBadReceives + Counter, + els10-27lpbkErrorSize + INTEGER, + els10-27lpbkErrorSent + OCTET STRING, + els10-27lpbkErrorReceived + OCTET STRING, + els10-27lpbkErrorOffset + INTEGER + } + + els10-27lpbkIndex OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + " " + ::= { els10-27lpbkEntry 1 } + + els10-27lpbkOperation OBJECT-TYPE + SYNTAX INTEGER { + loopback-off(1), + loopback-local(2), + loopback-remote(3) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + " " + ::= { els10-27lpbkEntry 2 } + + els10-27lpbkDestAddr OBJECT-TYPE + SYNTAX OCTET STRING + ACCESS read-write + STATUS mandatory + DESCRIPTION + " " + ::= { els10-27lpbkEntry 3 } + + els10-27lpbkPktNum OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + " " + ::= { els10-27lpbkEntry 4 } + + els10-27lpbkInterval OBJECT-TYPE + SYNTAX TimeTicks + ACCESS read-write + STATUS mandatory + DESCRIPTION + " " + ::= { els10-27lpbkEntry 5 } + + els10-27lpbkPktLength OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + " " + ::= { els10-27lpbkEntry 6 } + + els10-27lpbkIncrements OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + " " + ::= { els10-27lpbkEntry 7 } + + els10-27lpbkGoods OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + " " + ::= { els10-27lpbkEntry 8 } + + els10-27lpbkErrorNoReceives OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + " " + ::= { els10-27lpbkEntry 9 } + + els10-27lpbkErrorBadReceives OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + " " + ::= { els10-27lpbkEntry 10 } + + els10-27lpbkErrorSize OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + " " + ::= { els10-27lpbkEntry 11 } + + els10-27lpbkErrorSent OBJECT-TYPE + SYNTAX OCTET STRING + ACCESS read-only + STATUS mandatory + DESCRIPTION + " " + ::= { els10-27lpbkEntry 12 } + + els10-27lpbkErrorReceived OBJECT-TYPE + SYNTAX OCTET STRING + ACCESS read-only + STATUS mandatory + DESCRIPTION + " " + ::= { els10-27lpbkEntry 13 } + + els10-27lpbkErrorOffset OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + " " + ::= { els10-27lpbkEntry 14 } + + + + -- Protocols Group + +els10-27protoTable OBJECT-TYPE + SYNTAX SEQUENCE OF LxprotoEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "This table contains configuration information specify- + ing the types of protocols used to bridge, route, + translate, and filter frames for each port." + ::= { els10-27proto 1 } + +els10-27protoEntry OBJECT-TYPE + SYNTAX LxprotoEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "Each entry in this table specifies which protocols are + used by a particular port in the ES/1." + INDEX { els10-27protoIfIndex } + ::= { els10-27protoTable 1 } + +LxprotoEntry ::= + SEQUENCE { + els10-27protoIfIndex + INTEGER, + els10-27protoBridge + INTEGER, + els10-27protoSuppressBpdu + INTEGER, + els10-27protoRipListen + INTEGER, + els10-27protoTrunking + INTEGER, + els10-27sprotoTransmitPacing + INTEGER + } + +els10-27protoIfIndex OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Identifies the interface (port) to which this entry's + information belongs. The value of this variable + corresponds to ifIndex, as well as most of the other + port identification values in related MIBs." + ::= { els10-27protoEntry 1 } + +els10-27protoBridge OBJECT-TYPE + SYNTAX INTEGER { transparent(1), none(4) } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Defines the bridging method to be applied to frames + received at, or destined for, this port. Ethernet and + FDDI ports may be configured for transparent, srt, or + none. Token Ring ports may be configured for any of + the four options. The UART may only be configured to + none." + ::= { els10-27protoEntry 2 } + +els10-27protoSuppressBpdu OBJECT-TYPE + SYNTAX INTEGER { normal(1), suppressed(2) } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Allows transmission of spanning tree protocol packets + to be suppressed. If normal(1), 802.1d spanning tree + packets are + transmitted as usual. If suppressed(2), these packets + are not transmitted. This option may be needed for in- + teroperability with non-802.1d spanning tree protocols + (e.g., DEC LanBridge 100)." + ::= { els10-27protoEntry 3 } + +els10-27protoRipListen OBJECT-TYPE + SYNTAX INTEGER { enabled(1), disabled(2) } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Specifies whether the port should listen for internet + Routing Information Protocol (RFC-1058) packets, in order to + build the routing table for the unit." + ::= { els10-27protoEntry 4 } + +els10-27protoTrunking OBJECT-TYPE + SYNTAX INTEGER { enabled(1), disabled(2) } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Specifies whether SMC's trunking protocol (an extension + to the standard Spanning Tree) is to be used over this port." + ::= { els10-27protoEntry 5 } + +els10-27sprotoTransmitPacing OBJECT-TYPE + SYNTAX INTEGER { enabled(1), disabled(2) } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "When enabled, introduces delays into normal transmission of frames, to + reduce the probability of collisions during heavy traffic." + ::= { els10-27protoEntry 6 } + + -- Trunking Group + + +els10-27trunkTable OBJECT-TYPE + SYNTAX SEQUENCE OF LxtrunkEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "This table describes the trunking status and attributes of + the interfaces that are configured for bridge trunking." + ::= { els10-27trunk 1 } + +els10-27trunkEntry OBJECT-TYPE + SYNTAX LxtrunkEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "An entry exists in this table for each physical interface + (port) that is configured for trunking." + INDEX { els10-27trunkIfIndex } + ::= { els10-27trunkTable 1 } + + LxtrunkEntry ::= + SEQUENCE { + els10-27trunkIfIndex + INTEGER, + els10-27trunkState + INTEGER, + els10-27trunkRemoteBridgeAddr + OCTET STRING, + els10-27trunkRemoteIp + IpAddress, + els10-27trunkLastError + INTEGER, + els10-27trunkLinkOrdinal + INTEGER, + els10-27trunkLinkCount + INTEGER, + els10-27trunkLastChange + INTEGER + } + +els10-27trunkIfIndex OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Identifies a physical interface (port) which is + configured for LAN trunking. The value of this variable + corresponds to ifIndex, as well as most of the other + port identification values in related MIBs." + ::= { els10-27trunkEntry 1 } + +els10-27trunkState OBJECT-TYPE + SYNTAX INTEGER { off(1), + closed(2), + oneway(3), + joined(4), + perturbed(5), + helddown(6), + broken(7) } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "If off(1) then this link has not been enabled for trunking. + If closed(2) then this link has not yet received any Trunking + PDUs. If oneway(3) then incoming Trunking PDUs do not indicate + that our PDUs are being successfully received by the far end. + If joined(4) then this link is actively participating in the + trunk group. If perturbed(5) then this link is actively + participating in the trunk group; however, the transmission of + data packets has been temporarily stopped due to a change in + membership of the group. If helddown(6) then an error has been + detected and the link is being held out-of-service until the error + clears. If broken(7) then this link has been configured for trunking, + but the port is physically non-operational." + ::= { els10-27trunkEntry 2 } + +els10-27trunkRemoteBridgeAddr OBJECT-TYPE + SYNTAX OCTET STRING + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The MAC address portion of the bridge ID of the remote bridge." + ::= { els10-27trunkEntry 3 } + +els10-27trunkRemoteIp OBJECT-TYPE + SYNTAX IpAddress + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The IP address of the remote bridge, as reported by that + bridge for administrative purposes." + ::= { els10-27trunkEntry 4 } + +els10-27trunkLastError OBJECT-TYPE + SYNTAX INTEGER { none(1), + in-bpdu(2), + multiple-bridges(3), + ack-lost(4), + standby(5), + too-many-groups(6), + no-ack(7), + perturbed-threshold(8), + self-connect(9), + port-moved(10), + multiple-lan-types(11) } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The last reason for failure when the link is in closed, oneway, or helddown state." + ::= { els10-27trunkEntry 5 } + +els10-27trunkLinkOrdinal OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The position of this link within the trunk group." + ::= { els10-27trunkEntry 6 } + +els10-27trunkLinkCount OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of links within the trunk group." + ::= { els10-27trunkEntry 7 } + +els10-27trunkLastChange OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of seconds since els10-27trunkState changed." + ::= { els10-27trunkEntry 8 } + + -- Workgroup Group + +els10-27WorkGroupNextNumber OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The next available workgroup number to be used. When creating + a new workgroup, it is recommended to read the value of the variable + and use it to key into the workgroup table." + ::= { els10-27workgroup 1 } + +els10-27WorkGroupCurrentCount OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The total number of workgroups currently defined." + ::= { els10-27workgroup 2 } + +els10-27WorkGroupMaxCount OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The maximum number of workgroups allowed." + ::= { els10-27workgroup 3 } + +els10-27WorkGroupTable OBJECT-TYPE + SYNTAX SEQUENCE OF LxWorkGroupEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "This table contains work group definitions for the interfaces." + ::= { els10-27workgroup 4 } + +els10-27WorkGroupEntry OBJECT-TYPE + SYNTAX LxWorkGroupEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "Each entry in this table contains a definition of a work group." + INDEX { els10-27WorkGroupNumber } + ::= { els10-27WorkGroupTable 1 } + + LxWorkGroupEntry ::= + SEQUENCE { + els10-27WorkGroupNumber + INTEGER, + els10-27WorkGroupName + DisplayString, + els10-27WorkGroupPorts + OCTET STRING, + els10-27WorkGroupType + INTEGER + } + +els10-27WorkGroupNumber OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + "An integer that identifies the work group, used as an index + to this table." + ::= { els10-27WorkGroupEntry 1 } + +els10-27WorkGroupName OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-write + STATUS mandatory + DESCRIPTION + "A 1-16 character work group name." + ::= { els10-27WorkGroupEntry 2 } + +els10-27WorkGroupPorts OBJECT-TYPE + SYNTAX OCTET STRING + ACCESS read-write + STATUS mandatory + DESCRIPTION + "A list of all ports within the group. The first + octet specified ports 1-8, the second 9-16, etc." + ::= { els10-27WorkGroupEntry 3 } + +els10-27WorkGroupType OBJECT-TYPE + SYNTAX INTEGER { all(3), -- all broadcast packets + invalid(4) } -- to delete this group + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The type of work group: + all - no additional information needs to be supplied." + ::= { els10-27WorkGroupEntry 4 } + + -- Trap Group + +els10-27trapControlTable OBJECT-TYPE + SYNTAX SEQUENCE OF LxtrapControlEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "This table contains information about the severity of each trap + and whether the trap is currently enabled." + ::= { els10-27trapMgt 1 } + +els10-27trapControlEntry OBJECT-TYPE + SYNTAX LxtrapControlEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + " " + INDEX { els10-27trapIndex } + ::= { els10-27trapControlTable 1 } + + LxtrapControlEntry ::= + SEQUENCE { + els10-27trapIndex + INTEGER, + els10-27trapEnabled + INTEGER, + els10-27trapSeverity + INTEGER, + els10-27trapText + DisplayString + } + +els10-27trapIndex OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The specific trap number." + ::= { els10-27trapControlEntry 1 } + +els10-27trapEnabled OBJECT-TYPE + SYNTAX INTEGER { true(1), false(2) } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Enable or disable the generation of this trap." + ::= { els10-27trapControlEntry 2 } + +els10-27trapSeverity OBJECT-TYPE + SYNTAX INTEGER { informational(1), + warning(2), + minor(3), + major(4), + critical(5) } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "A user-definable severity, indicating the importance of the + trap." + ::= { els10-27trapControlEntry 3 } + +els10-27trapText OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "A description of the trap." + ::= { els10-27trapControlEntry 4 } + +els10-27trapSeverityControlTable OBJECT-TYPE + SYNTAX SEQUENCE OF LxtrapSeverityControlEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "This table contains information about whether a class of + traps of a particular severity are enabled or disabled." + ::= { els10-27trapMgt 2 } + +els10-27trapSeverityControlEntry OBJECT-TYPE + SYNTAX LxtrapSeverityControlEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + " " + INDEX { els10-27trapSeverity } + ::= { els10-27trapSeverityControlTable 1 } + + LxtrapSeverityControlEntry ::= + SEQUENCE { + els10-27trapSeverityControlSeverity + INTEGER, + els10-27trapSeverityEnable + INTEGER + } + +els10-27trapSeverityControlSeverity OBJECT-TYPE + SYNTAX INTEGER { informational(1), + warning(2), + minor(3), + major(4), + critical(5) } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "A user-definable severity, indicating the importance of the + trap." + ::= { els10-27trapSeverityControlEntry 1 } + +els10-27trapSeverityEnable OBJECT-TYPE + SYNTAX INTEGER { enabled(1), disabled(2) } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Enable or disable all traps of a given severity level." + ::= { els10-27trapSeverityControlEntry 2 } + +els10-27trapIncludeText OBJECT-TYPE + SYNTAX INTEGER { true(1), false(2) } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Whether or not a formatted text string is included in the trap + PDU." + ::= { els10-27trapMgt 3 } + +els10-27trapTime OBJECT-TYPE + SYNTAX TimeTicks + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The time, in centiseconds, which should expire between the sending + of traps." + -- DEFVAL { 100 } + ::= { els10-27trapMgt 4 } + +els10-27trapRetry OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The number of times any enterprise-specific trap is to be sent for + a given event. PDUs are retried using a truncated exponential backoff: + 2 seconds, 4 seoncs, 8 seconds, 16 seconds, and then 32 seconds for + all succeeding intervals." + -- DEFVAL { 1 } + ::= { els10-27trapMgt 5 } + +els10-27trapNumber OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of traps that are in the els10-27trapTable." + ::= { els10-27trapMgt 6 } + +els10-27trapTable OBJECT-TYPE + SYNTAX SEQUENCE OF LxtrapEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "This table contains the latest traps that have been generated." + ::= { els10-27trapMgt 7 } + +els10-27trapEntry OBJECT-TYPE + SYNTAX LxtrapEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + " " + INDEX { els10-27trapEntryIndex } + ::= { els10-27trapTable 1 } + + LxtrapEntry ::= + SEQUENCE { + els10-27trapEntryIndex + INTEGER, + els10-27trapEntryTimeStamp + TimeTicks, + els10-27trapEntryText + DisplayString, + els10-27trapEntryNumber + INTEGER, + els10-27trapEntrySeverity + INTEGER + } + +els10-27trapEntryIndex OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "A number representing the order in which the trap occurred + in time. This 32 bit number can wrap." + ::= { els10-27trapEntry 1 } + +els10-27trapEntryTimeStamp OBJECT-TYPE + SYNTAX TimeTicks + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The time at which the trap occurred." + ::= { els10-27trapEntry 2 } + +els10-27trapEntryText OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "A description of the trap." + ::= { els10-27trapEntry 3 } + +els10-27trapEntryNumber OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The specific trap number, as specified in the TRAP PDU." + ::= { els10-27trapEntry 4 } + +els10-27trapEntrySeverity OBJECT-TYPE + SYNTAX INTEGER { informational(1), + warning(2), + minor(3), + major(4), + critical(5) } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "A user-definable severity, indicating the importance of the + trap." + ::= { els10-27trapEntry 5 } + + + -- Ping Management MIB + + + els10-27pingDataTimeout OBJECT-TYPE + SYNTAX TimeTicks + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The time, in centiseconds, from the last ping activity (a send + or receive of an ECHO_RESPONSE or ECHO_REQUEST + message), to when the els10-27pingEntry information for that ping + request will be deleted." + ::= {els10-27pingMgt 1} + + els10-27pingTable OBJECT-TYPE + SYNTAX SEQUENCE OF LxpingEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "The set of information describing the active ping requests and + their results." + ::= {els10-27pingMgt 2} + + els10-27pingEntry OBJECT-TYPE + SYNTAX LxpingEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "The parameters, state, and results of a ping request." + INDEX { els10-27pingNMSAddr,els10-27pingDestAddr } + ::= {els10-27pingTable 1} + + LxpingEntry ::= SEQUENCE { + els10-27pingNMSAddr + IpAddress, + els10-27pingDestAddr + IpAddress, + els10-27pingState + INTEGER, + els10-27pingCount + INTEGER, + els10-27pingDataSize + INTEGER, + els10-27pingWait + TimeTicks, + els10-27pingTimeOut + TimeTicks, + els10-27pingOperation + INTEGER, + els10-27pingMin + TimeTicks, + els10-27pingMax + TimeTicks, + els10-27pingAvg + TimeTicks, + els10-27pingNumTransmitted + INTEGER, + els10-27pingNumReceived + INTEGER + } + + els10-27pingNMSAddr OBJECT-TYPE + SYNTAX IpAddress + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The IP address of the NMS, used to determine which ping + request to return information on." + ::= {els10-27pingEntry 1} + + els10-27pingDestAddr OBJECT-TYPE + SYNTAX IpAddress + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The IP address which is to be the destination of the ping + ECHO_REQUEST. This variable cannot be set while + els10-27pingOperation is on." + ::= {els10-27pingEntry 2} + + els10-27pingState OBJECT-TYPE + SYNTAX INTEGER { + not-started(0), + active (1), + timed-out (2), + completed (3)} + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The current state of the ping request. " + ::= {els10-27pingEntry 3} + + els10-27pingCount OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The number of ping requests which are to be sent. This + variable cannot be set while els10-27pingOperation is on." + ::= { els10-27pingEntry 4} + + els10-27pingDataSize OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The datagram packet size which will be sent with the + ECHO_REQUEST, in bytes. This variable cannot be set while + els10-27pingOperation is on." + ::= { els10-27pingEntry 5} + + els10-27pingWait OBJECT-TYPE + SYNTAX TimeTicks + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The time, in centiseconds, between the sending of each + ECHO_REQUEST message. This variable cannot be set while + els10-27pingOperation is on." + ::= { els10-27pingEntry 6} + + els10-27pingTimeOut OBJECT-TYPE + SYNTAX TimeTicks + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The time, in centiseconds, since the last ECHO_RESPONSE + was received (or the last ECHO_REQUEST was sent, if there + have been no responses) when the ping request will time out. + This variable cannot be set while els10-27pingOperation is on." + ::= {els10-27pingEntry 7} + + els10-27pingOperation OBJECT-TYPE + SYNTAX INTEGER {on (1), off(2) } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Setting els10-27pingOperation to on will begin the ping request. + Setting els10-27pingOperation to off will terminate the ping request." + ::= {els10-27pingEntry 8} + + els10-27pingMin OBJECT-TYPE + SYNTAX TimeTicks + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The minimum round trip time for the ping requests and + responses, in centiseconds." + ::= {els10-27pingEntry 9} + + els10-27pingMax OBJECT-TYPE + SYNTAX TimeTicks + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The maximum round trip for the ping requests and + responses, in centiseconds." + ::= {els10-27pingEntry 10} + + els10-27pingAvg OBJECT-TYPE + SYNTAX TimeTicks + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The average round trip time for the ping requests and + responses, in centiseconds." + ::= {els10-27pingEntry 11} + + els10-27pingNumTransmitted OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of ICMP ECHO_REQUEST messages that have + been transmitted during this ping request." + ::= {els10-27pingEntry 12} + + els10-27pingNumReceived OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of ICMP ECHO_RESPONSE messages that have + been received as a result of this ping request." + ::= {els10-27pingEntry 13} + + + + -- Traceroute Management + + + els10-27traceDataTimeout OBJECT-TYPE + SYNTAX TimeTicks + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The time, in centiseconds, from the last traceroute activity (the + response to or timeout of the last probe sent), to when the + els10-27traceEntry information for that traceroute request will be + deleted." + ::= {els10-27traceMgt 1} + + els10-27traceTable OBJECT-TYPE + SYNTAX SEQUENCE OF LxtraceEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "The set of information describing the active traceroute requests + and their results." + ::= {els10-27traceMgt 2} + + els10-27traceEntry OBJECT-TYPE + SYNTAX LxtraceEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "The parameters, state, and results of a traceroute request." + INDEX { els10-27traceNMSAddr, els10-27traceDestAddr, els10-27traceHop, + els10-27traceProbe} + ::= {els10-27traceTable 1} + + LxtraceEntry ::= SEQUENCE { + els10-27traceNMSAddr + IpAddress, + els10-27traceDestAddr + IpAddress, + els10-27traceMaxTTL + INTEGER, + els10-27traceDataSize + INTEGER, + els10-27traceNumProbes + INTEGER, + els10-27traceWait + TimeTicks, + els10-27traceOperation + INTEGER, + els10-27traceHop + INTEGER, + els10-27traceHopAddr + IpAddress, + els10-27traceProbe + INTEGER, + els10-27traceState + INTEGER, + els10-27traceTime + TimeTicks + } + + els10-27traceNMSAddr OBJECT-TYPE + SYNTAX IpAddress + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The IP address of the NMS, used to determine which traceroute + request to return information on." + ::= {els10-27traceEntry 1} + + els10-27traceDestAddr OBJECT-TYPE + SYNTAX IpAddress + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The IP address which is to be the destination of the traceroute + request.This variable cannot be set while els10-27traceOperation is on." + ::= {els10-27traceEntry 2} + + els10-27traceMaxTTL OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The maximum time-to-live for outgoing traceroute probe + packets. This determines the number of hops that can be in a + traceroute. This variable cannot be set while els10-27traceOperation + is on." + ::= {els10-27traceEntry 3} + + els10-27traceDataSize OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The size of the datagram sent with each probe. This variable + cannot be set while els10-27traceOperation is on." + ::= {els10-27traceEntry 4} + + els10-27traceNumProbes OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The number of probes which are sent for each hop. This + variable cannot be set while els10-27traceOperation is on." + ::= {els10-27traceEntry 5} + + els10-27traceWait OBJECT-TYPE + SYNTAX TimeTicks + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The time to wait in response to a probe. This variable cannot be + set while els10-27traceOperation is on." + ::= {els10-27traceEntry 6} + + els10-27traceOperation OBJECT-TYPE + SYNTAX INTEGER {on (1), off(2) } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Setting els10-27traceOperation to on will begin the traceroute request. + Setting els10-27traceOperation to off will terminate the traceroute + request." + ::= {els10-27traceEntry 7} + + els10-27traceHop OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The hop count for a set of probes with a particular TTL." + ::= {els10-27traceEntry 8} + + els10-27traceHopAddr OBJECT-TYPE + SYNTAX IpAddress + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The IP address of the host which responded for a probe with a + particular TTL." + ::= {els10-27traceEntry 9} + + els10-27traceProbe OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The probe instance for a particular hop." + ::= {els10-27traceEntry 10} + + els10-27traceState OBJECT-TYPE + SYNTAX INTEGER { + not-started(0), + active (1), + time-exceeded(2), + host-unreachable (3), + net-unreachable (4), + completed (5)} + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The current state of the trace probe." + ::= {els10-27traceEntry 11} + + els10-27traceTime OBJECT-TYPE + SYNTAX TimeTicks + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Round trip time of a probe for a particular hop." + ::= {els10-27traceEntry 12} + + +-- Enterprise Specific Objects for Port Mirroring + + els10-27volmirrorMode OBJECT-TYPE + SYNTAX INTEGER { off(0), + on(1) } + ACCESS read-write + STATUS mandatory + DESCRIPTION + " To turn port mirroring on or off." + ::= { els10-27volmirrorgroup 1 } + + els10-27volmirrorPort OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + " The number of the port whose data will be mirrored to a + special monitor or analyzer port." + ::= { els10-27volmirrorgroup 2 } + + els10-27volmonitorPort OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + " Identifies the monitor or analyzer port to receive + frames from the special mirror port." + ::= { els10-27volmirrorgroup 3 } + + els10-27volMirrorMacTable OBJECT-TYPE + SYNTAX SEQUENCE OF Els10-27volMirrorMacEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + " A table that contains information for the mirroring + on MAC addresses." + ::= { els10-27volmirrorgroup 4 } + + els10-27volmirrorMacEntry OBJECT-TYPE + SYNTAX Els10-27volMirrorMacEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + " Information about specific unicast MAC addresses + for which mirroring will act upon." + INDEX {els10-27volmirrorIndex} + ::= { els10-27volMirrorMacTable 1 } + + Els10-27volMirrorMacEntry ::= SEQUENCE { + els10-27volmirrorIndex + INTEGER, + els10-27volmirrorMac1 + OCTET STRING + -- els10-27volmirrorMac2 + -- OCTET STRING, + -- els10-27volmirrorMac3 + -- OCTET STRING, + -- els10-27volmirrorMac4 + -- OCTET STRING + } + + els10-27volmirrorIndex OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + " Entry Index" + ::= {els10-27volmirrorMacEntry 1} + + els10-27volmirrorMac1 OBJECT-TYPE + SYNTAX OCTET STRING + ACCESS read-write + STATUS mandatory + DESCRIPTION + " First MAC address for mirroring." + ::= {els10-27volmirrorMacEntry 2} + + --els10-27volmirrorMac2 OBJECT-TYPE + -- SYNTAX OCTET STRING + -- ACCESS read-write + -- STATUS mandatory + -- DESCRIPTION + -- " Second MAC address for mirroring." + -- ::= {els10-27volMirrorMacEntry 2} + + --els10-27volmirrorMac3 OBJECT-TYPE + -- SYNTAX OCTET STRING + -- ACCESS read-write + -- STATUS mandatory + -- DESCRIPTION + -- " Third MAC address for mirroring." + -- ::= {els10-27volMirrorMacEntry 3} + + --els10-27volmirrorMac4 OBJECT-TYPE + -- SYNTAX OCTET STRING + -- ACCESS read-write + -- STATUS mandatory + -- DESCRIPTION + -- " Fourth MAC address for mirroring." + -- ::= {els10-27volMirrorMacEntry 4} + +-- The els10-27VlanBridgeConfig group manages the overall configuration +-- of the bridge's VLAN resources. +-- +-- The implementation of this group is MANDATORY. + +els10-27VlanVersionNumber OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Specifies the version IEEE 802.1Q VLAN that has been implemented to." + ::= { els10-27VlanBridgeConfig 1 } + +els10-27VlanOperatingMode OBJECT-TYPE + SYNTAX INTEGER { ieee8021d(1), ieee8021Q(2) } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Selects the mode of operation. The switch can operate as simply an 802.1d switch, + or an 802.1d switch with IEEE VLAN capability (802.1Q). A read of this object will return + the current operating mode." + DEFVAL { ieee8021d } + ::= { els10-27VlanBridgeConfig 2 } + +els10-27VlanResetDefaults OBJECT-TYPE + SYNTAX INTEGER { + operating(1), + reset(2) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "To reset the specified bridge. The filtering database is cleared and initialized + with the entries specified in the Permananent database, and the Bridge protocol Entity is + initialized. While initializing a read will return a value of reset (2). While + operational a read will return a value of operating (2)." + ::= { els10-27VlanBridgeConfig 3 } + +els10-27VlanGVRPEnable OBJECT-TYPE + SYNTAX INTEGER + { + enabled(1), + disabled(2) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + + "If the switch is operating in 802.1Q mode, this selects whether GVRP protocol + messages should be processed and VLANs configured accordingly for each + port on the switch. Each octet within the value of this object specifies a set of eight + ports, with the first octet specifying ports 1 through 8, the next octet specifying ports + 9 through 16, etc. Within each octet, the least significant bit represents the + lowest numbered port, and the most significant bit represents the highest numbered port. + Thus, each port of the VLAN bridge is represented by single bit + within the value of this object. If that bit has a value of '1' then that port is + included in the set of ports; the port is not included if its bit has a value of '0'" + DEFVAL { disabled } + ::= { els10-27VlanBridgeConfig 4 } + +els10-27VlanAccessList OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + "A list of ports that should act as 'Access Ports'. These ports will strip all tags + on egress and also make use of a shared database that will automatically be kept by the + firmware. Each octet within the value of this object specifies a set of eight ports, with + the first octet specifying ports 1 through 8, the next octet specifying ports 9 through + 16, etc. Within each octet, the least significant bit represents the lowest numbered + port, and the most significant bit represents the highest numbered port. Thus, each port + of the VLAN bridge is represented by single bit within the value of this object. If that + bit has a value of '1' then that port is included in the set of ports; the port is not + included if its bit has a value of '0'" + ::= { els10-27VlanBridgeConfig 5 } + + +els10-27VlanConfigVlan OBJECT IDENTIFIER ::= { els10-27VlanBridgeConfig 6 } + +-- The els10-27VlanConfigVlan manages the configuration of a specific +-- VLAN within a bridge. +-- Each VLAN will have an entry in the els10-27VlanConfigTable +-- +-- The implementation of this group is MANDATORY. + +els10-27VlanNumActiveEntries OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of active VLAN entries for the device. This includes both static and + dynamic VLANs." + ::= { els10-27VlanConfigVlan 1 } + +els10-27VlanNumConfiguredEntries OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of configured VLAN entries for the device." + ::= { els10-27VlanConfigVlan 2 } + + +els10-27VlanMaxNumEntries OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The maximum number of VLAN entries for the device." + ::= { els10-27VlanConfigVlan 3 } + +els10-27VlanConfigTable OBJECT-TYPE + SYNTAX SEQUENCE OF Els10-27VlanConfigEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "This table allows for the creation, deletion, and modification of + specific VLANs. The ports defined within this group will be members of the 'member + set' as + defined in the IEEE 802.1Q specification." + ::= { els10-27VlanConfigVlan 4 } + +els10-27VlanConfigEntry OBJECT-TYPE + SYNTAX Els10-27VlanConfigEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "Allows for configuration of specific VLAN entries." + INDEX { els10-27VlanConfigVID } + ::= { els10-27VlanConfigTable 1 } + +Els10-27VlanConfigEntry ::= SEQUENCE { + els10-27VlanConfigIndex + INTEGER, + els10-27VlanConfigVID + INTEGER, + els10-27VlanConfigPorts + INTEGER, + els10-27VlanConfigIP + INTEGER, + els10-27VlanConfigIPMask + INTEGER, + els10-27VlanConfigName + DisplayString, + els10-27VlanConfigStatus + INTEGER, + els10-27VlanConfigEstablish + INTEGER + } + +els10-27VlanConfigIndex OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The interface being configured." + ::= { els10-27VlanConfigEntry 1 } + +els10-27VlanConfigVID OBJECT-TYPE + SYNTAX INTEGER (1..4094) + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The 12 bit VLAN Identifier associated with the configured VLAN." + ::= { els10-27VlanConfigEntry 2 } + +els10-27VlanConfigPorts OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + " Each octet within the value of this object specifies + a set of eight ports, with the first octet specifying + ports 1 through 8, the next octet specifying ports 9 + through 16, etc. Within each octet, the least significant + bit represents the lowest numbered port, and the most + significant bit represents the highest numbered port. + Thus, each port of the VLAN bridge is represented by + single bit within the value of this object. If that bit + has a value of '1' then that port is included in the set + of ports; the port is not included if its bit has a value of '0'." + ::= { els10-27VlanConfigEntry 3 } + +els10-27VlanConfigIP OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The IP address to be used to access the unit on this Vlan. This must be a + valid host address." + ::= { els10-27VlanConfigEntry 4 } + +els10-27VlanConfigIPMask OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The IP subnet mask to be used with this Ip address." + ::= { els10-27VlanConfigEntry 5 } + +els10-27VlanConfigName OBJECT-TYPE + SYNTAX DisplayString (SIZE (1..32)) + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The ASCII name associated with the configured VLAN. + A set of this object prior to creating an entry by + setting els10-27VlanEstablish will fail with a NO-INSTANCE error." + ::= { els10-27VlanConfigEntry 6 } + + +els10-27VlanConfigStatus OBJECT-TYPE + SYNTAX INTEGER { + enable(1), + disable(2) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "A set with the value of enable(1), enables all associated entries + in els10-27VlanConfigVID table for the specified VLAN. A set of + disable(2), disables all els10-27VlanConfigVID entries associated with + the specified VLAN. A set of this object prior to creating an entry by + setting els10-27VlanConfigEstablish will fail with a NO-INSTANCE error." + DEFVAL { disable } + ::= { els10-27VlanConfigEntry 7 } + + +els10-27VlanConfigEstablish OBJECT-TYPE + SYNTAX INTEGER { + create(1), + delete(2) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "A set of the value create(1), causes an entry to be created in + the els10-27VlanConfigTable as specified by the instancing information + of els10-27VlanConfigVID, els10-27VlanConfigName, and els10-27VlanConfigPorts. + A set of delete(2) causes the specified entry to be removed from the table. + A read of this object will always return create(1)." + ::= { els10-27VlanConfigEntry 8 } + + +els10-27VlanConfigEgressTable OBJECT-TYPE + SYNTAX SEQUENCE OF Els10-27VlanConfigEgressEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "This table allows for the specifying of the default VLAN ID for a specific port. If + NOT configured as an 'Access' port, then packets containing this VLAN ID will have the tag + stripped on egress. This will set the PVID for each port contained within the list." + ::= { els10-27VlanConfigVlan 5 } + + +els10-27VlanConfigEgressEntry OBJECT-TYPE + SYNTAX Els10-27VlanConfigEgressEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "Allows for configuration of specific VLAN entries." + INDEX { els10-27VlanEgressVID } + ::= { els10-27VlanConfigEgressTable 1 } + +Els10-27VlanConfigEgressEntry ::= SEQUENCE { + els10-27VlanEgressIndex + INTEGER, + els10-27VlanEgressVID + INTEGER, + els10-27VlanEgressList + INTEGER, + els10-27VlanEgressStatus + INTEGER + } +els10-27VlanEgressIndex OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The index into the Vlan table. A port must be a member of this Vlan prior + to assigning this Id as the default. " + ::= { els10-27VlanConfigEgressEntry 1 } + + +els10-27VlanEgressVID OBJECT-TYPE + SYNTAX INTEGER (1..4094) + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The 12 bit VLAN Identifier associated with the configured VLAN." + ::= { els10-27VlanConfigEgressEntry 2 } + +els10-27VlanEgressList OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The set of ports to which traffic destined for + the VLAN specified by els10-27VlanEgressVID + on the device will have this tag stripped on + egress. Each octet within the value of + this object specifies a set of eight ports, with thee + first octet specifying ports 1 through 8, the second + octet specifying ports 9 through 16, etc. Within each + octet, the least significant bit represents the lowest + numbered port, and the most significant bit represents + the highest numbered port. Thus, each port of the VLAN + bridge is represented by a single bit within the value + of this object. If that bit has a value of '1' then + that port is included in the set of ports; the port is + not included if its bit has a value of '0'." + ::= { els10-27VlanConfigEgressEntry 3 } + + +els10-27VlanEgressStatus OBJECT-TYPE + SYNTAX INTEGER { + enable(1), + disable(2) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "A set with the value of enable(1), enables all associated entries + in els10-27VlanEgressVID table for the specified VLAN. A set of + disable(2), disables all els10-27VlanEgressVID entries associated with + the specified VLAN. A set of this object prior to creating an entry by + setting els10-27VlanEgressEstablish will fail with a NO-INSTANCE error." + DEFVAL { disable } + ::= { els10-27VlanConfigEgressEntry 4 } + + +els10-27VlanFilterGVRPTable OBJECT-TYPE + SYNTAX SEQUENCE OF Els10-27VlanFilterGVRPEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "This table allows for the specifying of VLAN ID's that will be resticted from being learnt + by the device. If a GVRP packet is received specifying this VLAN ID, it will be ignored." + ::= { els10-27VlanConfigVlan 6 } + +els10-27VlanFilterGVRPEntry OBJECT-TYPE + SYNTAX Els10-27VlanFilterGVRPEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "Allows for configuration of specific entries." + INDEX { els10-27VlanFilterGVRPVID } + ::= { els10-27VlanFilterGVRPTable 1 } + +Els10-27VlanFilterGVRPEntry ::= SEQUENCE { + els10-27VlanFilterGVRPIndex + INTEGER, + els10-27VlanFilterGVRPVID + INTEGER, + els10-27VlanFilterGVRPList + INTEGER, + els10-27VlanFilterGVRPStatus + INTEGER, + els10-27VlanFilterGVRPEstablishVID + INTEGER + } + +els10-27VlanFilterGVRPIndex OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The index into the Vlan Filter table. A maximum of 32 + Vlan ID can be restricted from being learnt via GVRP. " + ::= { els10-27VlanFilterGVRPEntry 1 } + +els10-27VlanFilterGVRPVID OBJECT-TYPE + SYNTAX INTEGER (1..4094) + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The 12 bit VLAN Identifier associated with the configured VLAN." + ::= { els10-27VlanFilterGVRPEntry 2 } + +els10-27VlanFilterGVRPList OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The set of ports that will be restricted from leaning + of a VLAN ID from a GVRP message. The VLAN ID + is specified by els10-27VlanFilterGVRPVID. + Each octet within the value of + this object specifies a set of eight ports, with thee + first octet specifying ports 1 through 8, the second + octet specifying ports 9 through 16, etc. Within each + octet, the least significant bit represents the lowest + numbered port, and the most significant bit represents + the highest numbered port. Thus, each port of the VLAN + bridge is represented by a single bit within the value + of this object. If that bit has a value of '1' then + that port is included in the set of ports; the port is + not included if its bit has a value of '0'." + ::= { els10-27VlanFilterGVRPEntry 3 } + + +els10-27VlanFilterGVRPStatus OBJECT-TYPE + SYNTAX INTEGER { + enable(1), + disable(2) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "A set with the value of enable(1), enables all associated entries + in els10-27VlanFilterGVRPVID table for the specified VLAN. A set of + disable(2), disables all els10-27VlanFilterGVRPVID entries associated with + the specified VLAN. A set of this object prior to creating an entry by + setting els10-27VlanConfigEstablish will fail with a NO-INSTANCE error." + DEFVAL { disable } + ::= { els10-27VlanFilterGVRPEntry 4 } + + +els10-27VlanFilterGVRPEstablishVID OBJECT-TYPE + SYNTAX INTEGER { + create(1), + delete(2) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "A set of the value create(1), causes an entry to be created in + the els10-27VlanFilterGVRPTable as specified by the instancing information + of els10-27VlanFilterGVRpVID, and els10-27VlanFilterGVRPPorts. + A set of delete(2) causes the specified entry to be removed from the table. + A read of this object will always return create(1)." + ::= { els10-27VlanFilterGVRPEntry 5 } + + +els10-27VlanStaticTable OBJECT-TYPE + SYNTAX SEQUENCE OF Els10-27VlanStaticEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "Allows for configuration of specific VLAN/MAC Address entries and to specify the + port to which traffic destined for this address pair should be forwarded. These entries + will not be aged out of the forwarding data base." + ::= { els10-27VlanConfigVlan 7 } + + +els10-27VlanStaticEntry OBJECT-TYPE + SYNTAX Els10-27VlanStaticEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "Allows for specifying specific entries." + INDEX { els10-27VlanStaticVID } + ::= { els10-27VlanStaticTable 1 } + +Els10-27VlanStaticEntry ::= SEQUENCE { + els10-27VlanStaticVID + INTEGER, + els10-27VlanStaticMAC + PhysAddress, + els10-27VlanStaticPort + INTEGER, + els10-27VlanStaticEstablish + INTEGER + } + +els10-27VlanStaticVID OBJECT-TYPE + SYNTAX INTEGER (1..4094) + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The 12 bit VLAN Identifier associated with the configured VLAN." + ::= { els10-27VlanStaticEntry 1 } + +els10-27VlanStaticMAC OBJECT-TYPE + SYNTAX PhysAddress + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The media dependent physical address." + ::= { els10-27VlanStaticEntry 2 } + +els10-27VlanStaticPort OBJECT-TYPE + SYNTAX INTEGER (1.. 27) + ACCESS read-write + STATUS mandatory + DESCRIPTION + "An integer designating the port number to associate this address to." + ::= { els10-27VlanStaticEntry 3 } + + +els10-27VlanStaticEstablish OBJECT-TYPE + SYNTAX INTEGER { + create(1), + delete(2) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "A set of the value create(1), causes an entry to be created as specified by the instancing + information of els10-27VlanSaticVID, els10-27VlanStaticMAC, and els10-27VlanStaticPorts. A set of + delete(2) causes the specified entry to be removed from thetable. + A read of this object will always return create(1)." + ::= { els10-27VlanStaticEntry 4 } + +-- the IP Multicast group + + els10-27IPMulticastStatus OBJECT-TYPE + SYNTAX INTEGER {enabled (1), + disabled (0)} + ACCESS read-write + STATUS mandatory + DESCRIPTION + " Parameter to enable or disable IP multicast filtering + on the device. When enabled, the device will examine IP + Multicast data packets and dynamically set up filter + ports to prevent flooding. + The default is disabled." + ::= {els10-27volipmgroup 1} + + els10-27ipmInterfaceRtr OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Parameter to enable or disable the inclusion of this + interface in all Multicast filters. When enabled, all + IP Multicast packets for all group filters will be + transmitted over this interface. Value is a bit mask." + ::= {els10-27volipmgroup 2} + + +-- the IGMP group + els10-27igmpStatus OBJECT-TYPE + SYNTAX INTEGER {enabled (0), + disabled (1) } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Parameter to enable or disable IGMP snooping on + the device. When enabled, the device will examine IGMP + packets and set up filters for IGMP ports. + The default is enabled." + ::= {els10-27voligmpgroup 1} + + els10-27igmpQueryStatus OBJECT-TYPE + SYNTAX INTEGER {enabled (1), + disabled (0) } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Parameter to enable or disable the device to act as a + Querier. If enabled, the device will send out a Query + as a Proxy to solicit reports. The device will not + become an IGMP router. + The default is disabled." + ::= {els10-27voligmpgroup 2} + + els10-27igmpQueryCount OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Maximum number of queries that have not been heard on the + system before the system starts taking action to solicit + reports (default is 5)." + ::= {els10-27voligmpgroup 3} + + els10-27igmpPortDelay OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Timeout value (mins) between IGMP Reports or IGMP Queries + received on a port before the system times out the entry + from the Multicast Address Filter (default is 5 minutes)." + ::= {els10-27voligmpgroup 4} + +-- The IGMP Cache Table + + els10-27igmpCacheTable OBJECT-TYPE + SYNTAX SEQUENCE OF Els10-27igmpCacheEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "The (conceptual) table listing the IP multicast groups + for which there are members on a particular interface." + ::={els10-27voligmpgroup 5} + + els10-27igmpCacheEntry OBJECT-TYPE + SYNTAX Els10-27igmpCacheEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "An entry (conceptual row) in the els10-27igmpCacheTable." + INDEX {els10-27igmpCacheAddress,els10-27igmpCacheIfIndex} + ::={els10-27igmpCacheTable 1} + + Els10-27igmpCacheEntry ::= SEQUENCE { + els10-27igmpCacheAddress + IpAddress, + els10-27igmpCacheIfIndex + INTEGER, + els10-27igmpCacheExpiryTime + TimeTicks + } + + els10-27igmpCacheAddress OBJECT-TYPE + SYNTAX IpAddress + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The IP multicast group address for which this entry + contains information." + ::={els10-27igmpCacheEntry 1} + + els10-27igmpCacheIfIndex OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The interface for which this entry contains infor- + mation for an IP multicast group address." + ::={els10-27igmpCacheEntry 2} + + els10-27igmpCacheExpiryTime OBJECT-TYPE + SYNTAX TimeTicks + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The minimum amount of time remaining before this + entry will be aged out." + ::={els10-27igmpCacheEntry 3} + + +-- The els10-27FlowControl MIB is used to manage Volcano devices. +-- This managed object will allow for control and statistics +-- on half duplex flow control (back pressure) ports and IEEE 802.3x full +-- duplex flow control ports. + + +els10-27FlowControlBackPressure OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Control back pressure on a system wide basis. + On (1), + Off (2)" + ::= { els10-27FlowControlCtl 1 } + +els10-27FlowControlThresholdValue OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + " A value specified as a percent of the available buffers. + When fewer than the percent of the avaialable buffers + is detected, flow control will be initiated. Flow control + will cease when the free buffer count meets or exceeds + this percent." + ::= { els10-27FlowControlCtl 2 } + +els10-27FlowControlPauseInteval OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + "A value between 10 and 65535. Each pause interval is equal + to '5.12 microseconds'. A value of 10 will equal '51.2 + microseconds'." + ::= { els10-27FlowControlCtl 3 } + +els10-27FlowControlTable OBJECT-TYPE + SYNTAX SEQUENCE OF Els10-27FlowControlEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "Provides a list of control objects over flow control parameters." + ::= { els10-27FlowControlCtl 4 } + +els10-27FlowControlEntry OBJECT-TYPE + SYNTAX Els10-27FlowControlEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "Defines a particular entry containing objects pertaining to + definition and control over flow control ports." + INDEX { els10-27FlowControlInterface} + ::= { els10-27FlowControlTable 1 } + +Els10-27FlowControlEntry ::= SEQUENCE { + els10-27FlowControlInterface + INTEGER, + els10-27FlowControlEnable + INTEGER, + els10-27FlowControlRxPauseFrames + INTEGER, + els10-27FlowControlTxPauseFrames + INTEGER + } + + +els10-27FlowControlInterface OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + " The MIB2 interface for which this flow control information pertains" + ::= { els10-27FlowControlEntry 1 } + +els10-27FlowControlEnable OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + " Control 802.3x flow control on a per interface basis. + On (1), + Off (2)" + ::= { els10-27FlowControlEntry 2 } + +els10-27FlowControlRxPauseFrames OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of pause frames received on this interface." + ::= { els10-27FlowControlEntry 3 } + +els10-27FlowControlTxPauseFrames OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of pause frames transmitted on this interface." + ::= { els10-27FlowControlEntry 4 } + + +-- Enterprise Specific Traps for the ELS10-27 + +els10-27WriteStatusTrap TRAP-TYPE + ENTERPRISE sigma + VARIABLES { + els10-27trapSeverity, + els10-27swdisWriteStatus, + els10-27swdisDesc + } + DESCRIPTION + "Sent when a bank of Flash EPROM has been erased. If + els10-27swdisWriteStatus indicates success, then the unit is ready + to be downloaded with the new software." + ::= 2 + +els10-27PortFunctionsTrap TRAP-TYPE + ENTERPRISE sigma + VARIABLES { + els10-27trapSeverity, + els10-27ifFunction + } + DESCRIPTION + "Sent whenever the current functional state (active + protocols) of the port has changed." + ::= 3 + +els10-27RxQueuesTrap TRAP-TYPE + ENTERPRISE sigma + VARIABLES { + els10-27trapSeverity, + els10-27ifRxQueues + } + DESCRIPTION + "Sent whenever the number of times that the port's receiver + has stopped receiving packets due to buffer space shortages + has exceeded the port's limit." + ::= 4 + +els10-27RxStormFlagTrap TRAP-TYPE + ENTERPRISE sigma + VARIABLES { + els10-27trapSeverity + } + DESCRIPTION + "Sent whenever broadcast/multicast storm protection has been invoked + for the port." + ::= 5 + +els10-27TxCongestsTrap TRAP-TYPE + ENTERPRISE sigma + VARIABLES { + els10-27trapSeverity, + els10-27adminNAMReceiveCongests + } + DESCRIPTION + "Sent whenever packets destined for the unit itself were + discarded due to lack of buffer space." + ::= 6 + +els10-27DebugStringIdTrap TRAP-TYPE + ENTERPRISE sigma + VARIABLES { + els10-27trapSeverity, + els10-27debugStringID, + els10-27debugString + } + DESCRIPTION + "Sent whenever the unit has a debug text string to be + displayed. The text strings are sent in a stream-like + fashion." + ::= 8 + +els10-27LpbkOperationTrap TRAP-TYPE + ENTERPRISE sigma + VARIABLES { + els10-27trapSeverity, + els10-27lpbkOperation, + els10-27lpbkErrorNoReceives, + els10-27lpbkErrorBadReceives + } + DESCRIPTION + "Send whenever the unit has finished a loop back test, or + a loop back error has been detected." + ::= 9 + +els10-27TrunkStateTrap TRAP-TYPE + ENTERPRISE sigma + VARIABLES { + els10-27trapSeverity, + els10-27trunkState + } + DESCRIPTION + "A trunking state change transition has occurred. The possible + transitions are: + CLOSED-ONEWAY + ONEWAY-PERTURBED + PERTURBED-JOINED + JOINED-HELDDOWN + CLOSED-HELDDOWN + ONEWAY-HELDDOWN + PERTURBED-HELDDOWN" + ::= 10 + +els10-27TrunkBridgeAddrTrap TRAP-TYPE + ENTERPRISE sigma + VARIABLES { + els10-27trapSeverity, + els10-27trunkRemoteBridgeAddr + } + DESCRIPTION + "The associated trunking MAC address of the bridge ID of the remote + bridge has changed." + ::= 11 + +els10-27TrunkIPAddrTrap TRAP-TYPE + ENTERPRISE sigma + VARIABLES { + els10-27trapSeverity, + els10-27trunkRemoteIp + } + DESCRIPTION + "The associated trunking IP address of the remote bridge has changed." + ::= 12 + +els10-27TrunkErrorTrap TRAP-TYPE + ENTERPRISE sigma + VARIABLES { + els10-27trapSeverity, + els10-27trunkLastError + } + DESCRIPTION + "An error has occurred in trunking." + ::= 13 + +els10-27TrunkLinkOrdinalTrap TRAP-TYPE + ENTERPRISE sigma + VARIABLES { + els10-27trapSeverity, + els10-27trunkLinkOrdinal + } + DESCRIPTION + "The port's index in the trunking group has changed." + ::= 14 + +els10-27TrunkLinkCountTrap TRAP-TYPE + ENTERPRISE sigma + VARIABLES { + els10-27trapSeverity, + els10-27trunkLinkCount + } + DESCRIPTION + "The number of ports in the trunking group has changed." + ::= 15 + +els10-27DiagUnitBootedTrap TRAP-TYPE + ENTERPRISE sigma + VARIABLES { + els10-27trapSeverity, + els10-27adminFatalErr + } + DESCRIPTION + "The unit has booted. els10-27adminFatalErr contains information about + why the unit rebooted." + ::= 16 + +els10-27StorageFailureTrap TRAP-TYPE + ENTERPRISE sigma + VARIABLES { + els10-27trapSeverity + } + DESCRIPTION + "Sent if the unit's Configuration EEPROM has failed. The unit + will not be able to reboot, and must be returned to the + factory." +::= 17 + +els10-27PortCongestedTrap TRAP-TYPE + ENTERPRISE sigma + VARIABLES { + els10-27trapSeverity, + ifOutDiscards + } + DESCRIPTION + "Sent whenever outbound congestion control has been invoked + for the port." + ::= 18 + +els10-27TopChangeBegunTrap TRAP-TYPE + ENTERPRISE sigma + VARIABLES { + els10-27trapSeverity + } + DESCRIPTION + "The spanning tree topology has begun to change." + ::= 19 + +els10-27TopChangeEndTrap TRAP-TYPE + ENTERPRISE sigma + VARIABLES { + els10-27trapSeverity + } + DESCRIPTION + "The spanning tree topology has stopped changing." +::= 20 + +els10-27IfErrorsTrap TRAP-TYPE + ENTERPRISE sigma + VARIABLES { + els10-27trapSeverity, + ifInErrors, + ifOutErrors + } + DESCRIPTION + "Sent whenever the number of hardware errors in received and + transmitted packets has exceeded the port's limit." + ::= 21 + +els10-27StRootIDTrap TRAP-TYPE + ENTERPRISE sigma + VARIABLES { + els10-27trapSeverity, + dot1dStpDesignatedRoot + } + DESCRIPTION + "The spanning tree root bridge ID for the unit has changed." + ::= 22 + +els10-27StRootCostTrap TRAP-TYPE + ENTERPRISE sigma + VARIABLES { + els10-27trapSeverity, + dot1dStpRootCost + } + DESCRIPTION + "The unit's spanning tree cost to the root bridge has changed." + ::= 23 + +els10-27StRootPortTrap TRAP-TYPE + ENTERPRISE sigma + VARIABLES { + els10-27trapSeverity, + dot1dStpRootPort + } + DESCRIPTION + "The unit's spanning tree root port has changed." + ::= 24 + +els10-27StMaxAgeTrap TRAP-TYPE + ENTERPRISE sigma + VARIABLES { + els10-27trapSeverity, + dot1dStpMaxAge + } + DESCRIPTION + "The unit's spanning tree maximum age has changed." + ::= 25 + +els10-27StHelloTimeTrap TRAP-TYPE + ENTERPRISE sigma + VARIABLES { + els10-27trapSeverity, + dot1dStpHelloTime + } + DESCRIPTION + "The unit's spanning tree hello time has changed." + ::= 26 + +els10-27StForwardDelayTrap TRAP-TYPE + ENTERPRISE sigma + VARIABLES { + els10-27trapSeverity, + dot1dStpForwardDelay + } + DESCRIPTION + "The unit's spanning tree forward delay time has changed." + ::= 27 + +els10-27StDesigRootTrap TRAP-TYPE + ENTERPRISE sigma + VARIABLES { + els10-27trapSeverity, + dot1dStpPortDesignatedRoot + } + DESCRIPTION + "The Root Bridge ID in received Spanning Tree Configuration BPDUs + from the port has changed." + ::= 28 + +els10-27StPortDesigBridgeTrap TRAP-TYPE + ENTERPRISE sigma + VARIABLES { + els10-27trapSeverity, + dot1dStpPortDesignatedBridge + } + DESCRIPTION + "The bridge ID of the spanning tree designated bridge of the LAN/WAN + to which the port is attached has changed." + ::= 29 + +els10-27StPortDesigCostTrap TRAP-TYPE + ENTERPRISE sigma + VARIABLES { + els10-27trapSeverity, + dot1dStpPortDesignatedCost + } + DESCRIPTION + "The cost to the spanning tree root bridge from the designated port of + the LAN/WAN to which the port is attached has changed." + ::= 30 + +els10-27StPortDesigPortTrap TRAP-TYPE + ENTERPRISE sigma + VARIABLES { + els10-27trapSeverity, + dot1dStpPortDesignatedPort + } + DESCRIPTION + "The port ID of the spanning tree designated port of the LAN/WAN + to which the port is attached has changed." + ::= 31 + +els10-27StPortStateTrap TRAP-TYPE + ENTERPRISE sigma + VARIABLES { + els10-27trapSeverity, + dot1dStpPortState + } + DESCRIPTION + "The spanning tree state of the port has changed." + ::= 32 + +els10-27hwDiagTrap TRAP-TYPE + ENTERPRISE sigma + VARIABLES { + els10-27trapSeverity, + els10-27hwDiagCode + } + DESCRIPTION + "Sent whenever the unit's diagnostics have indicated an error." + ::= 100 + +els10-27InvalidConfigurationFileTrap TRAP-TYPE + ENTERPRISE sigma + VARIABLES { + els10-27trapSeverity, + dot1dStpPortDesignatedPort + } + DESCRIPTION + "Diagnostics has detected corrupted configuration data. + Default parameter values have been restored." + ::= 34 + +els10-27StInvalidFlashCodeImageTrap TRAP-TYPE + ENTERPRISE sigma + VARIABLES { + els10-27trapSeverity, + dot1dStpPortState + } + DESCRIPTION + "An invalid code image was detected in flash memory. + An attempt will be made to obtain a valid image." + ::= 35 + +END |