diff options
Diffstat (limited to 'MIBS/dragonwave/MWR-RADIO-MC-MIB')
| -rw-r--r-- | MIBS/dragonwave/MWR-RADIO-MC-MIB | 663 |
1 files changed, 663 insertions, 0 deletions
diff --git a/MIBS/dragonwave/MWR-RADIO-MC-MIB b/MIBS/dragonwave/MWR-RADIO-MC-MIB new file mode 100644 index 0000000..19dcf04 --- /dev/null +++ b/MIBS/dragonwave/MWR-RADIO-MC-MIB @@ -0,0 +1,663 @@ +
+-- File Name : MwrRadio-MC-MIB.mib
+-- Version : 1.0.0
+-- Date : October 6, 2014
+-- Author : DragonWave Inc.
+
+MWR-RADIO-MC-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+ MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-TYPE,
+ Counter32, Counter64, Integer32
+ FROM SNMPv2-SMI
+ DisplayString
+ FROM SNMPv2-TC
+ mwr
+ FROM DWI-HARMONY-PRIVATE-MIB
+ equipmentTrapInfo, equipmentOutTrapsCounter, equipmentAlarmActiveConditionId, EnableType
+ FROM EQUIPMENT-COMMON-MIB
+ mwrEventConfigSeverity, RadioInstanceType
+ FROM MWR-ETHERNET-MIB;
+
+mwrRadioMcModIdentity MODULE-IDENTITY
+ LAST-UPDATED "201406101023Z"
+ ORGANIZATION
+ "Dragonwave Inc."
+ CONTACT-INFO
+ "http://www.dragonwaveinc.com
+ 600-411 Legget Drive
+ Ottawa, Ontario
+ Canada, K2K 3C9
+
+ Tel : 613-599-9991
+ Fax: 613-599-4265
+ Support: 613-271-7010"
+ DESCRIPTION
+ "This specifies the contact information and the revision tracking information for the MIB module version."
+
+ REVISION "201406231109Z"
+ DESCRIPTION
+ "First release of the Dragonwave Harmony radio Enhanced-multicarrier MIB."
+
+ REVISION "201409231722Z"
+ DESCRIPTION
+ "Updated some OIDs Descriptions."
+::= { mwr 1003 }
+
+mwrRadio OBJECT IDENTIFIER ::= { mwr 12 }
+mwrEmcRadioConfigurations OBJECT IDENTIFIER ::= { mwrRadio 201 }
+mwrEmcRadioStatus OBJECT IDENTIFIER ::= { mwrRadio 202 }
+mwrEmcRadioPerformance OBJECT IDENTIFIER ::= { mwrRadio 203 }
+mwrEmcRadioNotifications OBJECT IDENTIFIER ::= { mwrRadio 204 }
+
+mwrEmcRadioConfigurationsTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF MwrEmcRadioConfigurationsEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Table containing radio configurations."
+ ::= { mwrEmcRadioConfigurations 1 }
+
+mwrEmcRadioConfigurationsEntry OBJECT-TYPE
+ SYNTAX MwrEmcRadioConfigurationsEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Table entry containing radio channel configurations."
+ INDEX { mwrEmcRadioConfigIndex }
+ ::= { mwrEmcRadioConfigurationsTable 1 }
+
+MwrEmcRadioConfigurationsEntry ::= SEQUENCE {
+ mwrEmcRadioConfigIndex
+ RadioInstanceType,
+ mwrEmcRadioTxState
+ EnableType,
+ mwrEmcRadioTxPower
+ Integer32,
+ mwrEmcRadioTxDownTime
+ Integer32,
+ mwrEmcRadioRxFrequency
+ Integer32,
+ mwrEmcRadioTxFrequency
+ Integer32
+}
+
+mwrEmcRadioConfigIndex OBJECT-TYPE
+ SYNTAX RadioInstanceType
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A unique value for each radio channel if applicable."
+ ::= { mwrEmcRadioConfigurationsEntry 1 }
+
+mwrEmcRadioTxState OBJECT-TYPE
+ SYNTAX EnableType
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Represents the transmit state of the radio channel."
+ ::= { mwrEmcRadioConfigurationsEntry 2 }
+
+mwrEmcRadioTxPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "dB"
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This defines the programmed transmit level of the radio channel.
+ The power you see is divided by 10. e.g. A display of 133 is actually 13.3 dB.
+ Notes:
+ - Programmed and Actual transmit power may differ - see mwrEmcRadioActualTxPower."
+ ::= { mwrEmcRadioConfigurationsEntry 3 }
+
+mwrEmcRadioTxDownTime OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "sec"
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The amount of time in seconds the radio transmitter is disabled when the mwrEmcRadioTxState is turned off.
+ - Make sure this is set before the mwrEmcRadioTxState is disabled.
+ - If the down time is set to 0, the radio will stay disabled until it is re-enabled again."
+ ::= { mwrEmcRadioConfigurationsEntry 4 }
+
+mwrEmcRadioRxFrequency OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "kHz"
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Represents the receive Radio frequency in kHz."
+ ::= { mwrEmcRadioConfigurationsEntry 5 }
+
+mwrEmcRadioTxFrequency OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "kHz"
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Represents the transmit Radio frequency in kHz."
+ ::= { mwrEmcRadioConfigurationsEntry 6 }
+
+mwrEmcRadioProfileTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF MwrEmcRadioProfileEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Table containing the radio profile configurations."
+ ::= { mwrEmcRadioConfigurations 2 }
+
+mwrEmcRadioProfileEntry OBJECT-TYPE
+ SYNTAX MwrEmcRadioProfileEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Table entry containing the radio profile configurations."
+ INDEX { mwrEmcRadioStandardMode,
+ mwrEmcRadioChannelBw,
+ mwrEmcRadioStaticTxProfile }
+ ::= { mwrEmcRadioProfileTable 1 }
+
+MwrEmcRadioProfileEntry ::= SEQUENCE {
+ mwrEmcRadioStandardMode
+ DisplayString,
+ mwrEmcRadioChannelBw
+ DisplayString,
+ mwrEmcRadioStaticTxProfile
+ DisplayString,
+ mwrEmcRadioProgrammedProfile
+ EnableType
+}
+
+mwrEmcRadioStandardMode OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An index representing the available standard mode of the radio channel."
+ ::= { mwrEmcRadioProfileEntry 1 }
+
+mwrEmcRadioChannelBw OBJECT-TYPE
+ SYNTAX DisplayString
+ UNITS "MHz"
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An index representing the available channel bandwidth of the radio channel."
+ ::= { mwrEmcRadioProfileEntry 2 }
+
+mwrEmcRadioStaticTxProfile OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An index representing the available static tx profile of the radio channel."
+ ::= { mwrEmcRadioProfileEntry 3 }
+
+mwrEmcRadioProgrammedProfile OBJECT-TYPE
+ SYNTAX EnableType
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Represents the configured standard mode, channel BW and the TX profile of the radio channel."
+ ::= { mwrEmcRadioProfileEntry 4 }
+
+mwrEmcRadioThresholdAlarmTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF MwrEmcRadioThresholdAlarmEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Table containing the threshold alarm configurations of the radio channel."
+ ::= { mwrEmcRadioConfigurations 3 }
+
+mwrEmcRadioThresholdAlarmEntry OBJECT-TYPE
+ SYNTAX MwrEmcRadioThresholdAlarmEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Table entry containing the threshold alarm configurations of the radio channel."
+ INDEX { mwrEmcRadioThresholdIndex }
+ ::= { mwrEmcRadioThresholdAlarmTable 1 }
+
+MwrEmcRadioThresholdAlarmEntry ::= SEQUENCE {
+ mwrEmcRadioThresholdIndex
+ RadioInstanceType,
+ mwrEmcRadioRslBelowThresholdParams
+ DisplayString,
+ mwrEmcRadioTxAboveThresholdParams
+ DisplayString
+}
+
+mwrEmcRadioThresholdIndex OBJECT-TYPE
+ SYNTAX RadioInstanceType
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A unique value for each radio channel if applicable."
+ ::= { mwrEmcRadioThresholdAlarmEntry 1 }
+
+mwrEmcRadioRslBelowThresholdParams OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Represents the RSL threshold in dB and the number of seconds the RSL should be below the threshold.
+ An example of the format of the string is as follows: '-75 10'. The first parameter power level in dB, the second is the time in seconds. In this example the threshold -75 dB and the time is set to 10 seconds. The single quote marks are not used in the command."
+ ::= { mwrEmcRadioThresholdAlarmEntry 2 }
+
+mwrEmcRadioTxAboveThresholdParams OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Represents the radio transmit power threshold in dB and the number of seconds threshold must be exceeded.
+ An example of the format of the string is as follows: '-75 10'. The first parameter power level in dB, the second is the time in seconds. In this example the threshold -75 dB and the time is set to 10 seconds. The single quote marks are not used in the command."
+ ::= { mwrEmcRadioThresholdAlarmEntry 3 }
+
+mwrEmcRadioChCfgSynchEnable OBJECT-TYPE
+ SYNTAX EnableType
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object enables or disables synchronization of the radio configuration on multiple carriers."
+ ::= { mwrEmcRadioConfigurations 4 }
+
+--
+-- RADIO INFORMATION
+--
+
+mwrEmcRadioStatusTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF MwrEmcRadioStatusEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Table containing the status of the radio channel."
+ ::= { mwrEmcRadioStatus 1 }
+
+mwrEmcRadioStatusEntry OBJECT-TYPE
+ SYNTAX MwrEmcRadioStatusEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Table entry containing the status of the radio channel."
+ INDEX { mwrEmcRadioStatusIndex }
+ ::= { mwrEmcRadioStatusTable 1 }
+
+MwrEmcRadioStatusEntry ::= SEQUENCE {
+ mwrEmcRadioStatusIndex
+ RadioInstanceType,
+ mwrEmcRadioOperStatus
+ INTEGER,
+ mwrEmcRadioTRSpacing
+ Integer32,
+ mwrEmcRadioActualTxStatus
+ EnableType,
+ mwrEmcRadioRxFreqMin
+ Integer32,
+ mwrEmcRadioRxFreqMax
+ Integer32,
+ mwrEmcRadioTxFreqMin
+ Integer32,
+ mwrEmcRadioTxFreqMax
+ Integer32,
+ mwrEmcRadioTxPowerMin
+ Integer32,
+ mwrEmcRadioTxPowerMax
+ Integer32,
+ mwrEmcRadioLinkStatus
+ INTEGER
+}
+
+mwrEmcRadioStatusIndex OBJECT-TYPE
+ SYNTAX RadioInstanceType
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A unique value for each radio channel if applicable."
+ ::= { mwrEmcRadioStatusEntry 1 }
+
+mwrEmcRadioOperStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ up (1),
+ down (2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The current operational state of the Radio. When radio is fully configured and ready to operate the status will be up."
+ ::= { mwrEmcRadioStatusEntry 2 }
+
+mwrEmcRadioTRSpacing OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "kHz"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Represents the difference between the configured TX/RX center frequency of the radio channel."
+ ::= { mwrEmcRadioStatusEntry 3 }
+
+mwrEmcRadioActualTxStatus OBJECT-TYPE
+ SYNTAX EnableType
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object defines the actual transmit state of the radio channel."
+ ::= { mwrEmcRadioStatusEntry 4 }
+
+mwrEmcRadioRxFreqMin OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "kHz"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Represents the minimum radio RX frequency allowed."
+ ::= { mwrEmcRadioStatusEntry 5 }
+
+mwrEmcRadioRxFreqMax OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "kHz"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Represents the maximum radio RX frequency allowed."
+ ::= { mwrEmcRadioStatusEntry 6 }
+
+mwrEmcRadioTxFreqMin OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "kHz"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Represents the minimum radio TX frequency allowed."
+ ::= { mwrEmcRadioStatusEntry 7 }
+
+mwrEmcRadioTxFreqMax OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "kHz"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Represents the maximum radio TX frequency allowed."
+ ::= { mwrEmcRadioStatusEntry 8 }
+
+mwrEmcRadioTxPowerMin OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "dB"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Represents the minimum radio Transmit Power allowed."
+ ::= { mwrEmcRadioStatusEntry 9 }
+
+mwrEmcRadioTxPowerMax OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "dB"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Represents the maximum radio Transmit Power allowed."
+ ::= { mwrEmcRadioStatusEntry 10 }
+
+mwrEmcRadioLinkStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ up (1),
+ down (2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The current operational status of the radio link."
+ ::= { mwrEmcRadioStatusEntry 11 }
+
+mwrEmcRadioPerfStatsTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF MwrEmcRadioPerfStatsEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Table containing the performance of the radio channel."
+ ::= { mwrEmcRadioPerformance 1 }
+
+mwrEmcRadioPerfStatsEntry OBJECT-TYPE
+ SYNTAX MwrEmcRadioPerfStatsEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Table entry containing the performance of the radio channel."
+ INDEX { mwrEmcRadioStatsIndex }
+ ::= { mwrEmcRadioPerfStatsTable 1 }
+
+MwrEmcRadioPerfStatsEntry ::= SEQUENCE {
+ mwrEmcRadioStatsIndex
+ RadioInstanceType,
+ mwrEmcRadioTxFrames
+ Counter64,
+ mwrEmcRadioRxGoodFrames
+ Counter64,
+ mwrEmcRadioRxErrsFrames
+ Counter64,
+ mwrEmcRadioRSL
+ Integer32,
+ mwrEmcRadioEqualizerStress
+ Integer32,
+ mwrEmcRadioSNR
+ Integer32,
+ mwrEmcRadioLinkAvailability
+ Counter32,
+ mwrEmcRadioActualTxPower
+ Integer32,
+ mwrEmcRadioActualTxProfile
+ DisplayString
+}
+
+mwrEmcRadioStatsIndex OBJECT-TYPE
+ SYNTAX RadioInstanceType
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A unique value for each radio channel if applicable."
+ ::= { mwrEmcRadioPerfStatsEntry 1 }
+
+mwrEmcRadioTxFrames OBJECT-TYPE
+ SYNTAX Counter64
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The current count of radio frames transmitted."
+ ::= { mwrEmcRadioPerfStatsEntry 2 }
+
+mwrEmcRadioRxGoodFrames OBJECT-TYPE
+ SYNTAX Counter64
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The current count of good radio frames received."
+ ::= { mwrEmcRadioPerfStatsEntry 3 }
+
+mwrEmcRadioRxErrsFrames OBJECT-TYPE
+ SYNTAX Counter64
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The current count of radio frames received in error."
+ ::= { mwrEmcRadioPerfStatsEntry 4 }
+
+mwrEmcRadioRSL OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "An estimate of the radio RSL. Divide the value by 10 to get the actual RSL value. Once this number is divided by 10 the units are dB. For example -352 is actually -35.2dB"
+ ::= { mwrEmcRadioPerfStatsEntry 5 }
+
+mwrEmcRadioEqualizerStress OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates the average magnitude of all the equalizer taps to provide a measure of how hard the equalizer is working."
+ ::= { mwrEmcRadioPerfStatsEntry 6 }
+
+mwrEmcRadioSNR OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "dB"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The absolute value of the estimate of the radio SNR. Divide the value by 10 to get the actual SNR."
+ ::= { mwrEmcRadioPerfStatsEntry 7 }
+
+mwrEmcRadioLinkAvailability OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "sec"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The amount of time the radio link is up."
+ ::= { mwrEmcRadioPerfStatsEntry 8 }
+
+mwrEmcRadioActualTxPower OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object indicates the running configuration for tx power."
+ ::= { mwrEmcRadioPerfStatsEntry 9 }
+
+mwrEmcRadioActualTxProfile OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A read-only string specifying the actual value for the TX profile."
+ ::= { mwrEmcRadioPerfStatsEntry 10 }
+
+mwrEmcRadioPerfStats32BitTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF MwrEmcRadioPerfStats32BitEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Table containing 32-bit counters of the radio channel. This table is provided to satisfy snmp v1 users where they can't access 64-bit counters."
+ ::= { mwrEmcRadioPerformance 2 }
+
+mwrEmcRadioPerfStats32BitEntry OBJECT-TYPE
+ SYNTAX MwrEmcRadioPerfStats32BitEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Table entry containing 32-bit counters of the radio channel."
+ INDEX { mwrEmcRadioStats32BitIndex }
+ ::= { mwrEmcRadioPerfStats32BitTable 1 }
+
+MwrEmcRadioPerfStats32BitEntry ::= SEQUENCE {
+ mwrEmcRadioStats32BitIndex
+ RadioInstanceType,
+ mwrEmcRadioTxFrames32Bit
+ Counter32,
+ mwrEmcRadioRxGoodFrames32Bit
+ Counter32,
+ mwrEmcRadioRxErrsFrames32Bit
+ Counter32
+}
+
+mwrEmcRadioStats32BitIndex OBJECT-TYPE
+ SYNTAX RadioInstanceType
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A unique value for each radio channel if applicable."
+ ::= { mwrEmcRadioPerfStats32BitEntry 1 }
+
+mwrEmcRadioTxFrames32Bit OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A low capacity 32-bit counter representing the current count of radio frames transmitted."
+ ::= { mwrEmcRadioPerfStats32BitEntry 2 }
+
+mwrEmcRadioRxGoodFrames32Bit OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A low capacity 32-bit counter representing the current count of radio frames received."
+ ::= { mwrEmcRadioPerfStats32BitEntry 3 }
+
+mwrEmcRadioRxErrsFrames32Bit OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A low capacity 32-bit counter representing the current count of radio frames received in error."
+ ::= { mwrEmcRadioPerfStats32BitEntry 4 }
+
+--
+-- RADIO NOTIFICATIONS
+--
+
+mwrEmcRadioRxLossOfSync NOTIFICATION-TYPE
+ OBJECTS { mwrEventConfigSeverity,
+ mwrEmcRadioStatusIndex,
+ equipmentAlarmActiveConditionId,
+ equipmentTrapInfo,
+ equipmentOutTrapsCounter }
+ STATUS current
+ DESCRIPTION
+ "This notification is raised when radio link loses synchronization on its receiver. The mwrEmcRadioStatusIndex indicates each radio channel."
+ ::= { mwrEmcRadioNotifications 1 }
+
+mwrEmcRadioFailure NOTIFICATION-TYPE
+ OBJECTS { mwrEventConfigSeverity,
+ mwrEmcRadioStatusIndex,
+ equipmentAlarmActiveConditionId,
+ equipmentTrapInfo,
+ equipmentOutTrapsCounter }
+ STATUS current
+ DESCRIPTION
+ "This notification is raised when fault is detected in radio. The reason could be faulty components or invalid configuration. The mwrEmcRadioStatusIndex indicates each radio channel."
+ ::= { mwrEmcRadioNotifications 2 }
+
+mwrEmcRadioCalUnavailable NOTIFICATION-TYPE
+ OBJECTS { mwrEventConfigSeverity,
+ equipmentAlarmActiveConditionId,
+ equipmentTrapInfo,
+ equipmentOutTrapsCounter }
+ STATUS current
+ DESCRIPTION
+ "This notification is raised when the calibration information is not available in the system."
+ ::= { mwrEmcRadioNotifications 3 }
+
+mwrEmcRadioRslBelowThreshold NOTIFICATION-TYPE
+ OBJECTS { mwrEventConfigSeverity,
+ mwrEmcRadioStatusIndex,
+ equipmentAlarmActiveConditionId,
+ equipmentTrapInfo,
+ equipmentOutTrapsCounter }
+ STATUS current
+ DESCRIPTION
+ "This notification is raised when the receive signal level of the radio link is below the user configured limit. The mwrEmcRadioStatusIndex indicates each radio channel."
+ ::= { mwrEmcRadioNotifications 4 }
+
+mwrEmcRadioTxlAboveThreshold NOTIFICATION-TYPE
+ OBJECTS { mwrEventConfigSeverity,
+ mwrEmcRadioStatusIndex,
+ equipmentAlarmActiveConditionId,
+ equipmentTrapInfo,
+ equipmentOutTrapsCounter }
+ STATUS current
+ DESCRIPTION
+ "This notification is raised when the radio transmit power level exceeds the user set limit. The mwrEmcRadioStatusIndex indicates each radio channel."
+ ::= { mwrEmcRadioNotifications 5 }
+
+mwrEmcRadioConfigMismatch NOTIFICATION-TYPE
+ OBJECTS { mwrEventConfigSeverity,
+ mwrEmcRadioStatusIndex,
+ equipmentAlarmActiveConditionId,
+ equipmentTrapInfo,
+ equipmentOutTrapsCounter }
+ STATUS current
+ DESCRIPTION
+ "This notification is raised when the radio configuration between the peers is mismatched."
+ ::= { mwrEmcRadioNotifications 6 }
+END
+
|