diff options
Diffstat (limited to 'MIBS/dpstelecom/DPS-MIB-V38-V2EXT')
| -rw-r--r-- | MIBS/dpstelecom/DPS-MIB-V38-V2EXT | 1187 |
1 files changed, 1187 insertions, 0 deletions
diff --git a/MIBS/dpstelecom/DPS-MIB-V38-V2EXT b/MIBS/dpstelecom/DPS-MIB-V38-V2EXT new file mode 100644 index 0000000..f1c4c81 --- /dev/null +++ b/MIBS/dpstelecom/DPS-MIB-V38-V2EXT @@ -0,0 +1,1187 @@ +-- Title: DPS_V41v2.MIB
+-- Version: v4.1 for SNMPv2c
+--
+-- Copyright @ 2015 DPS Inc. All Rights Reserved
+--
+-- This MIB defines objects for the DPS products.
+--
+-- Note: AnalogChannels table only available in NetGuardianG4 v4.2J or later
+--
+
+DPS-MIB-V38-V2EXT DEFINITIONS ::= BEGIN
+
+IMPORTS
+ DisplayString
+ FROM SNMPv2-TC
+ MODULE-IDENTITY,
+ NOTIFICATION-TYPE,
+ OBJECT-TYPE,
+ Integer32
+ FROM SNMPv2-SMI
+ enterprises
+ FROM RFC1155-SMI
+ ;
+
+dpsInc OBJECT IDENTIFIER ::= {enterprises 2682}
+
+dpsAlarmControl OBJECT IDENTIFIER ::= {dpsInc 1}
+
+tmonXM OBJECT IDENTIFIER ::= {dpsAlarmControl 1}
+
+tmonV2XM MODULE-IDENTITY
+ LAST-UPDATED "201502051200Z" --February 5th, 2015 12:00 PDT
+ ORGANIZATION "DPS Telecom"
+ CONTACT-INFO "DPS Support Team
+ Web http://dpstele.com/support
+ E-Mail support@dpstele.com
+ Phone (559)454-1600"
+ DESCRIPTION "Second generation MIB for DPS Telecom products"
+
+ REVISION "201502051200Z" --February 5th, 2015 12:00 PDT
+ DESCRIPTION "Modified for proper smi/asn.1 formatting and structure (CBH)"
+
+ ::= { dpsAlarmControl 3 }
+
+tmonV2Ident OBJECT IDENTIFIER ::= {tmonV2XM 1}
+
+tmonV2IdentManufacturer OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "The TMON/XM Unit manufacturer."
+ ::= {tmonV2Ident 1}
+
+tmonV2IdentModel OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "The TMON/XM model designation."
+ ::= {tmonV2Ident 2}
+
+tmonV2IdentSoftwareVersion OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "The TMON/XM SNMP Agent software version."
+ ::= {tmonV2Ident 3}
+
+tmonV2AlarmTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF TMonV2AlarmEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION "A table of TMonV2 Alarm-specific information. Returns standing alarms."
+ ::= {tmonV2XM 2}
+
+tmonV2AlarmEntry OBJECT-TYPE
+ SYNTAX TMonV2AlarmEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION "Information about a particular TMonV2 alarm."
+ INDEX {tmonV2AIndex}
+ ::= {tmonV2AlarmTable 1}
+
+TMonV2AlarmEntry ::= SEQUENCE { tmonV2AIndex Integer32,
+ tmonV2ASite DisplayString,
+ tmonV2ADesc DisplayString,
+ tmonV2AState DisplayString,
+ tmonV2ASeverity DisplayString,
+ tmonV2AChgDate DisplayString,
+ tmonV2AChgTime DisplayString,
+ tmonV2AAuxDesc DisplayString,
+ tmonV2ADispDesc DisplayString,
+ tmonV2APntType Integer32,
+ tmonV2APort Integer32,
+ tmonV2AAddress Integer32,
+ tmonV2ADisplay Integer32,
+ tmonV2APoint Integer32,
+ tmonV2AEvent Integer32,
+ tmonV2AIPAddr DisplayString,
+ tmonV2ADevDesc DisplayString
+ }
+
+tmonV2AIndex OBJECT-TYPE
+ SYNTAX Integer32 (0..2147483647)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION "Tmon alarm table index (1..NumberOfAlarms)."
+ ::={tmonV2AlarmEntry 1}
+
+tmonV2ASite OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "The site of the alarm (i.e. Atlanta Hub, Sub-Station H32)."
+ ::= {tmonV2AlarmEntry 2}
+
+tmonV2ADesc OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "A user-defined text string associated with the alarm
+ (i.e. South Door, Generator, Power Grid 1)."
+ ::= {tmonV2AlarmEntry 3}
+
+tmonV2AState OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "The current alarm state."
+ ::= {tmonV2AlarmEntry 4}
+
+tmonV2ASeverity OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "The severity of the last alarm event."
+ ::= {tmonV2AlarmEntry 5}
+
+tmonV2AChgDate OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "The date (mm/dd/yy) of the last alarm event."
+ ::= {tmonV2AlarmEntry 6}
+
+tmonV2AChgTime OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "The time (hh:mm:ss) of the last alarm event."
+ ::= {tmonV2AlarmEntry 7}
+
+tmonV2AAuxDesc OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "An auxiliary user-defined text string associated with the
+ alarm (i.e. This remote needs servicing)."
+ ::= {tmonV2AlarmEntry 8}
+
+tmonV2ADispDesc OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "A description of the display on which this point appears."
+ ::= {tmonV2AlarmEntry 9}
+
+tmonV2APntType OBJECT-TYPE
+ SYNTAX Integer32 (0..999)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "Type of this point."
+ ::={tmonV2AlarmEntry 10}
+
+tmonV2APort OBJECT-TYPE
+ SYNTAX Integer32 (0..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "Port on which this point is reported."
+ ::={tmonV2AlarmEntry 11}
+
+tmonV2AAddress OBJECT-TYPE
+ SYNTAX Integer32 (0..9999)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "Address of unit reporting this point."
+ ::={tmonV2AlarmEntry 12}
+
+tmonV2ADisplay OBJECT-TYPE
+ SYNTAX Integer32 (0..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "Display on which this point appears."
+ ::={tmonV2AlarmEntry 13}
+
+tmonV2APoint OBJECT-TYPE
+ SYNTAX Integer32 (0..64)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "Index into display of this point."
+ ::={tmonV2AlarmEntry 14}
+
+tmonV2AEvent OBJECT-TYPE
+ SYNTAX Integer32 (0..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "Event id for this message."
+ ::={tmonV2AlarmEntry 15}
+
+tmonV2AIPAddr OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "The IP Address of the device on which this point appears."
+ ::= {tmonV2AlarmEntry 16}
+
+tmonV2ADevDesc OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "A description of the devie on which this point appears."
+ ::= {tmonV2AlarmEntry 17}
+
+-- structure used to issue a command to tmonV2XM element
+
+tmonV2CommandGrid OBJECT IDENTIFIER ::= {tmonV2XM 3}
+
+tmonV2CPType OBJECT-TYPE
+ SYNTAX Integer32 (0..2147483647)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "Tmon point type."
+ ::= {tmonV2CommandGrid 1}
+
+tmonV2CPort OBJECT-TYPE
+ SYNTAX Integer32 (0..2147483647)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "Tmon port number."
+ ::= {tmonV2CommandGrid 2}
+
+tmonV2CAddress OBJECT-TYPE
+ SYNTAX Integer32 (0..9999)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "Tmon_port address number."
+ ::= {tmonV2CommandGrid 3}
+
+tmonV2CDisplay OBJECT-TYPE
+ SYNTAX Integer32 (0..2147483647)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "Tmon_port_address display number."
+ ::= {tmonV2CommandGrid 4}
+
+tmonV2CPoint OBJECT-TYPE
+ SYNTAX Integer32 (0..64)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "Tmon_port_display point number (1-64)."
+ ::= {tmonV2CommandGrid 5}
+
+tmonV2CEvent OBJECT-TYPE
+ SYNTAX Integer32 (0..2147483647)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "Tmon event ID."
+ ::= {tmonV2CommandGrid 6}
+
+tmonV2CAction OBJECT-TYPE
+ SYNTAX INTEGER { latch(1),
+ release(2),
+ momentary(3),
+ ack(17),
+ tag(18),
+ untag(19)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "Requested command action (tmonV2XM will ignore if invalid)."
+ ::= {tmonV2CommandGrid 7}
+
+tmonV2CAuxText OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "An auxiliary user-defined text string associated with the
+ command (i.e. User_initials)."
+ ::= {tmonV2CommandGrid 8}
+
+tmonV2CResult OBJECT-TYPE
+ SYNTAX INTEGER { success(1),
+ failure(2),
+ pending(3)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "Command result."
+ ::= {tmonV2CommandGrid 9}
+
+-- structure used for the cos table list
+
+tmonV2CosEventTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF TMonV2CosEventEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION "A table of TMonV2 Alarm-specific information. Returns change of state alarms."
+ ::= {tmonV2XM 4}
+
+tmonV2CosEventEntry OBJECT-TYPE
+ SYNTAX TMonV2CosEventEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION "Information about a particular TMonV2 change of state alarm."
+ INDEX {tmonV2AIndex}
+ ::= {tmonV2CosEventTable 1}
+
+TMonV2CosEventEntry ::= SEQUENCE { tmonV2CosEIndex Integer32,
+ tmonV2CosESite DisplayString,
+ tmonV2CosEDesc DisplayString,
+ tmonV2CosEState DisplayString,
+ tmonV2CosESeverity DisplayString,
+ tmonV2CosEChgDate DisplayString,
+ tmonV2CosEChgTime DisplayString,
+ tmonV2CosEAuxDesc DisplayString,
+ tmonV2CosEDispDesc DisplayString,
+ tmonV2CosEPntType Integer32,
+ tmonV2CosEPort Integer32,
+ tmonV2CosEAddress Integer32,
+ tmonV2CosEDisplay Integer32,
+ tmonV2CosEPoint Integer32,
+ tmonV2CosEEventID Integer32
+ }
+
+tmonV2CosEIndex OBJECT-TYPE
+ SYNTAX Integer32 (0..2147483647)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION "Tmon change of state alarm table index (1..NumberOfAlarms)."
+ ::={tmonV2CosEventEntry 1}
+
+tmonV2CosESite OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "The site of the change of state alarm (i.e. Atlanta Hub, Sub-Station H32)."
+ ::= {tmonV2CosEventEntry 2}
+
+tmonV2CosEDesc OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "A user-defined text string associated with the alarm
+ (i.e. South Door, Generator, Power Grid 1)."
+ ::= {tmonV2CosEventEntry 3}
+
+tmonV2CosEState OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "The alarm state."
+ ::= {tmonV2CosEventEntry 4}
+
+tmonV2CosESeverity OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "The severity of the alarm event."
+ ::= {tmonV2CosEventEntry 5}
+
+tmonV2CosEChgDate OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "The date (mm/dd/yy) of the alarm event."
+ ::= {tmonV2CosEventEntry 6}
+
+tmonV2CosEChgTime OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "The time (hh:mm:ss) of the alarm event."
+ ::= {tmonV2CosEventEntry 7}
+
+tmonV2CosEAuxDesc OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "An auxiliary user-defined text string associated with the
+ alarm (i.e. This remote needs servicing)."
+ ::= {tmonV2CosEventEntry 8}
+
+tmonV2CosEDispDesc OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "A description of the display on which this point appears."
+ ::= {tmonV2CosEventEntry 9}
+
+tmonV2CosEPntType OBJECT-TYPE
+ SYNTAX Integer32 (0..999)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "Type of this point."
+ ::={tmonV2CosEventEntry 10}
+
+tmonV2CosEPort OBJECT-TYPE
+ SYNTAX Integer32 (0..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "Port on which this point is reported."
+ ::={tmonV2CosEventEntry 11}
+
+tmonV2CosEAddress OBJECT-TYPE
+ SYNTAX Integer32 (0..9999)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "Address of unit reporting this point."
+ ::={tmonV2CosEventEntry 12}
+
+tmonV2CosEDisplay OBJECT-TYPE
+ SYNTAX Integer32 (0..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "Display on which this point appears."
+ ::={tmonV2CosEventEntry 13}
+
+tmonV2CosEPoint OBJECT-TYPE
+ SYNTAX Integer32 (0..64)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "Index into display of this point."
+ ::={tmonV2CosEventEntry 14}
+
+tmonV2CosEEventID OBJECT-TYPE
+ SYNTAX Integer32 (0..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "Unique event ID for the alarm event."
+ ::={tmonV2CosEventEntry 15}
+
+-- structure used for the alarm status grid
+
+tmonV2AlarmGrid OBJECT-TYPE
+ SYNTAX SEQUENCE OF TMonV2AlarmGridEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION "A table of TMonV2 Alarm-specific information. Returns alarm status."
+ ::= {tmonV2XM 5}
+
+tmonV2AlarmGridEntry OBJECT-TYPE
+ SYNTAX TMonV2AlarmGridEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION "Information about a particular TMonV2 alarm."
+ INDEX {tmonV2AIndex}
+ ::= {tmonV2AlarmGrid 1}
+
+TMonV2AlarmGridEntry ::= SEQUENCE { tmonV2AGIndex Integer32,
+ tmonV2AGSite DisplayString,
+ tmonV2AGDesc DisplayString,
+ tmonV2AGState DisplayString,
+ tmonV2AGSeverity DisplayString,
+ tmonV2AGChgDate DisplayString,
+ tmonV2AGChgTime DisplayString,
+ tmonV2AGAuxDesc DisplayString,
+ tmonV2AGDispDesc DisplayString,
+ tmonV2AGPntType Integer32,
+ tmonV2AGPort Integer32,
+ tmonV2AGAddress Integer32,
+ tmonV2AGDisplay Integer32,
+ tmonV2AGPoint Integer32
+ }
+
+tmonV2AGIndex OBJECT-TYPE
+ SYNTAX Integer32 (0..2147483647)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION "Tmon alarm table index (1..NumberOfAlarms)."
+ ::={tmonV2AlarmGridEntry 1}
+
+tmonV2AGSite OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "The site of the alarm (i.e. Atlanta Hub, Sub-Station H32)."
+ ::= {tmonV2AlarmGridEntry 2}
+
+tmonV2AGDesc OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "A user-defined text string associated with the alarm
+ (i.e. South Door, Generator, Power Grid 1)."
+ ::= {tmonV2AlarmGridEntry 3}
+
+tmonV2AGState OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "The current alarm state."
+ ::= {tmonV2AlarmGridEntry 4}
+
+tmonV2AGSeverity OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "The severity of the last alarm event."
+ ::= {tmonV2AlarmGridEntry 5}
+
+tmonV2AGChgDate OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "The date (mm/dd/yy) of the last alarm event."
+ ::= {tmonV2AlarmGridEntry 6}
+
+tmonV2AGChgTime OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "The time (hh:mm:ss) of the last alarm event."
+ ::= {tmonV2AlarmGridEntry 7}
+
+tmonV2AGAuxDesc OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "An auxiliary user-defined text string associated with the
+ alarm (i.e. This remote needs servicing)."
+ ::= {tmonV2AlarmGridEntry 8}
+
+tmonV2AGDispDesc OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "A description of the display on which this point appears."
+ ::= {tmonV2AlarmGridEntry 9}
+
+tmonV2AGPntType OBJECT-TYPE
+ SYNTAX Integer32 (0..999)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "Type of this point."
+ ::={tmonV2AlarmGridEntry 10}
+
+tmonV2AGPort OBJECT-TYPE
+ SYNTAX Integer32 (0..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "Port on which this point is reported."
+ ::={tmonV2AlarmGridEntry 11}
+
+tmonV2AGAddress OBJECT-TYPE
+ SYNTAX Integer32 (0..9999)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "Address of unit reporting this point."
+ ::={tmonV2AlarmGridEntry 12}
+
+tmonV2AGDisplay OBJECT-TYPE
+ SYNTAX Integer32 (0..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "Display on which this point appears."
+ ::={tmonV2AlarmGridEntry 13}
+
+tmonV2AGPoint OBJECT-TYPE
+ SYNTAX Integer32 (0..64)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "Index into display of this point."
+ ::={tmonV2AlarmGridEntry 14}
+
+
+-- Table for accessing TMon analog channel value
+
+tmonV2analogChannels OBJECT-TYPE
+ SYNTAX SEQUENCE OF TMonV2channelEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION "Holds information on analog channels"
+ ::= {tmonV2XM 6}
+
+tmonV2channelEntry OBJECT-TYPE
+ SYNTAX ChannelEntryv2
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION "Information about a particular channel"
+ INDEX {channelNumberv2}
+ ::= {tmonV2analogChannels 1}
+
+TMonV2channelEntry ::= SEQUENCE { tmonV2chanPort Integer32,
+ tmonV2chanAddress Integer32,
+ tmonV2chanNumber Integer32,
+ tmonV2chanEnabled Integer32,
+ tmonV2chanDescription DisplayString,
+ tmonV2chanValueInt Integer32,
+ tmonV2chanValueInt100 Integer32,
+ tmonV2chanValueStr DisplayString,
+ tmonV2chanDisplayunits DisplayString,
+ tmonV2chanThresholds Integer32
+ }
+
+tmonV2chanPort OBJECT-TYPE
+ SYNTAX Integer32 (0..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "Input channel port reference"
+ ::= {tmonV2channelEntry 1}
+
+tmonV2chanAddress OBJECT-TYPE
+ SYNTAX Integer32 (0..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "Input channel device address reference"
+ ::= {tmonV2channelEntry 2}
+
+tmonV2chanNumber OBJECT-TYPE
+ SYNTAX Integer32 (0..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "Input channel number"
+ ::= {tmonV2channelEntry 3}
+
+tmonV2chanEnabled OBJECT-TYPE
+ SYNTAX INTEGER { disabled (0),
+ enabled (1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "Enable status of channel"
+ ::= {tmonV2channelEntry 4}
+
+tmonV2chanDescription OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "The user defined description of the channel"
+ ::= {tmonV2channelEntry 5}
+
+tmonV2chanValueInt OBJECT-TYPE
+ SYNTAX Integer32 (0..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "The current value of the channel as an integer. This is the whole number only"
+ ::= {tmonV2channelEntry 6}
+
+tmonV2chanValueInt100 OBJECT-TYPE
+ SYNTAX Integer32 (0..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "The current value of the channel as an integer. This value is multiplied by 100 to preserve decimal values."
+ ::= {tmonV2channelEntry 7}
+
+tmonV2chanValueStr OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "The current value of the channel as a string"
+ ::= {tmonV2channelEntry 8}
+
+tmonV2chanDisplayunits OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "The current display units of the channel value"
+ ::= {tmonV2channelEntry 9}
+
+tmonV2chanThresholds OBJECT-TYPE
+ SYNTAX INTEGER { noAlarms (0),
+ minorUnder (1),
+ minorOver (2),
+ majorUnder (3),
+ majorOver (4)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "Highest threshold level crossed, if MJ, MN is assumed"
+ ::= {tmonV2channelEntry 10}
+
+dpsRTUv2 OBJECT IDENTIFIER ::= {dpsAlarmControl 4}
+
+dpsRTUv2Ident OBJECT IDENTIFIER ::= {dpsRTUv2 1}
+
+dpsRTUv2Manufacturer OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "The Remote Telemetry Unit manufacturer."
+ ::= {dpsRTUv2Ident 1}
+
+dpsRTUv2Model OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "The RTU model designation."
+ ::= {dpsRTUv2Ident 2}
+
+dpsRTUv2FirmwareVersion OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "The RTU firmware version."
+ ::= {dpsRTUv2Ident 3}
+
+dpsRTUv2DateTime OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "The RTU system date and time."
+ ::= {dpsRTUv2Ident 4}
+
+dpsRTUv2SyncReq OBJECT-TYPE
+ SYNTAX INTEGER { sync(1)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "Caution: SETting this object initiates traps for all
+ standing alarms."
+ ::= {dpsRTUv2Ident 5}
+
+
+-- structure used to access displays managed by this RTU
+
+dpsRTUv2DisplayGrid OBJECT-TYPE
+ SYNTAX SEQUENCE OF DPSrtuV2DispEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION "Holds information on displays managed by the RTU."
+ ::= {dpsRTUv2 2}
+
+dpsRTUv2DisplayEntry OBJECT-TYPE
+ SYNTAX DPSrtuV2DispEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION "Information about a particular RTU display."
+ INDEX {dpsRTUv2Port, dpsRTUv2Address, dpsRTUv2Display}
+ ::= {dpsRTUv2DisplayGrid 1}
+
+DPSrtuV2DispEntry ::= SEQUENCE { dpsRTUv2Port Integer32,
+ dpsRTUv2Address Integer32,
+ dpsRTUv2Display Integer32,
+ dpsRTUv2DispDesc DisplayString,
+ dpsRTUv2PntMap DisplayString
+ }
+
+dpsRTUv2Port OBJECT-TYPE
+ SYNTAX Integer32 (0..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "RTU port number."
+ ::= {dpsRTUv2DisplayEntry 1}
+
+dpsRTUv2Address OBJECT-TYPE
+ SYNTAX Integer32 (0..9999)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "RTU_port address number."
+ ::= {dpsRTUv2DisplayEntry 2}
+
+dpsRTUv2Display OBJECT-TYPE
+ SYNTAX Integer32 (0..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "RTU_port_address display number."
+ ::= {dpsRTUv2DisplayEntry 3}
+
+dpsRTUv2DispDesc OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "A description of the associated display."
+ ::= {dpsRTUv2DisplayEntry 4}
+
+dpsRTUv2PntMap OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "A map of the points appearing in this display."
+ ::= {dpsRTUv2DisplayEntry 5}
+
+
+-- structure used to issue a control to a managed point
+
+dpsRTUv2ControlGrid OBJECT IDENTIFIER ::= {dpsRTUv2 3}
+
+dpsRTUv2CPort OBJECT-TYPE
+ SYNTAX Integer32 (0..2147483647)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "RTU port number."
+ ::= {dpsRTUv2ControlGrid 1}
+
+dpsRTUv2CAddress OBJECT-TYPE
+ SYNTAX Integer32 (0..9999)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "RTU_port address number."
+ ::= {dpsRTUv2ControlGrid 2}
+
+dpsRTUv2CDisplay OBJECT-TYPE
+ SYNTAX Integer32 (0..2147483647)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "RTU_port_address display number."
+ ::= {dpsRTUv2ControlGrid 3}
+
+dpsRTUv2CPoint OBJECT-TYPE
+ SYNTAX Integer32 (0..64)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "RTU_port_display point number (1-64)."
+ ::= {dpsRTUv2ControlGrid 4}
+
+dpsRTUv2CAction OBJECT-TYPE
+ SYNTAX INTEGER { latch(1),
+ release(2),
+ momentary(3)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "Requested action on point (RTU will ignore if invalid)."
+ ::= {dpsRTUv2ControlGrid 5}
+
+
+
+dpsRTUv2AlarmGrid OBJECT-TYPE
+ SYNTAX SEQUENCE OF DPSrtuV2AlarmEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION "Holds individual alarm point information."
+ ::= {dpsRTUv2 5}
+
+dpsRTUv2AlarmEntry OBJECT-TYPE
+ SYNTAX DPSrtuV2AlarmEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION "Detailed information about a particular RTU display."
+ INDEX {dpsRTUv2APort, dpsRTUv2AAddress, dpsRTUv2ADisplay, dpsRTUv2APoint}
+ ::= {dpsRTUv2AlarmGrid 1}
+
+DPSrtuV2AlarmEntry ::= SEQUENCE { dpsRTUv2APort Integer32,
+ dpsRTUv2AAddress Integer32,
+ dpsRTUv2ADisplay Integer32,
+ dpsRTUv2APoint Integer32,
+ dpsRTUv2APntDesc DisplayString,
+ dpsRTUv2AState DisplayString
+ }
+
+dpsRTUv2APort OBJECT-TYPE
+ SYNTAX Integer32 (0..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "RTU port number."
+ ::= {dpsRTUv2AlarmEntry 1}
+
+dpsRTUv2AAddress OBJECT-TYPE
+ SYNTAX Integer32 (0..9999)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "RTU_port address number."
+ ::= {dpsRTUv2AlarmEntry 2}
+
+dpsRTUv2ADisplay OBJECT-TYPE
+ SYNTAX Integer32 (0..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "RTU_port_address display number."
+ ::= {dpsRTUv2AlarmEntry 3}
+
+dpsRTUv2APoint OBJECT-TYPE
+ SYNTAX Integer32 (0..64)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "RTU_port_address_display point number."
+ ::= {dpsRTUv2AlarmEntry 4}
+
+dpsRTUv2APntDesc OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "A description of this point."
+ ::= {dpsRTUv2AlarmEntry 5}
+
+dpsRTUv2AState OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "The current state of this point."
+ ::= {dpsRTUv2AlarmEntry 6}
+
+
+--Table for accessing analog channel value
+
+analogChannelsv2 OBJECT-TYPE
+ SYNTAX SEQUENCE OF ChannelEntryv2
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION "Holds information on analog channels"
+ ::= {dpsRTUv2 6}
+
+channelEntryv2 OBJECT-TYPE
+ SYNTAX ChannelEntryv2
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION "Information about a particular channel"
+ INDEX {channelNumberv2}
+ ::= {analogChannelsv2 1}
+
+ChannelEntryv2 ::= SEQUENCE { channelNumberv2 Integer32,
+ enabledv2 Integer32,
+ descriptionv2 DisplayString,
+ valuev2 DisplayString,
+ thresholdsv2 Integer32
+ }
+
+channelNumberv2 OBJECT-TYPE
+ SYNTAX Integer32 (0..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "Input channel number"
+ ::= {channelEntryv2 1}
+
+enabledv2 OBJECT-TYPE
+ SYNTAX INTEGER { disabled (0),
+ enabled (1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "Enable status of channel"
+ ::= {channelEntryv2 2}
+
+descriptionv2 OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "The user defined description of the channel"
+ ::= {channelEntryv2 3}
+
+valuev2 OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "The current value of the channel"
+ ::= {channelEntryv2 4}
+
+thresholdsv2 OBJECT-TYPE
+ SYNTAX INTEGER { noAlarms (0),
+ minorUnder (1),
+ minorOver (2),
+ majorUnder (3),
+ majorOver (4),
+ notDetected (5)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "Highest threshold level crossed, if MJ, MN is assumed"
+ ::= {channelEntryv2 5}
+
+-- TRAP definitions
+
+tmonV2CRalarmSet NOTIFICATION-TYPE
+ OBJECTS { tmonV2ASite, tmonV2ADesc, tmonV2AState, tmonV2ASeverity, tmonV2AChgDate,
+ tmonV2AChgTime, tmonV2AAuxDesc, tmonV2ADispDesc, tmonV2APntType,
+ tmonV2APort, tmonV2AAddress, tmonV2ADisplay, tmonV2APoint, tmonV2CEvent,
+ tmonV2AIPAddr, tmonV2ADevDesc }
+ STATUS current
+ DESCRIPTION "Generated when a critical alarm is set."
+-- ::= {tmonV2XM 10}
+ ::= {tmonXM 10}
+
+
+tmonV2CRalarmClr NOTIFICATION-TYPE
+ OBJECTS { tmonV2ASite, tmonV2ADesc, tmonV2AState, tmonV2ASeverity, tmonV2AChgDate,
+ tmonV2AChgTime, tmonV2AAuxDesc, tmonV2ADispDesc, tmonV2APntType,
+ tmonV2APort, tmonV2AAddress, tmonV2ADisplay, tmonV2APoint, tmonV2CEvent,
+ tmonV2AIPAddr, tmonV2ADevDesc }
+ STATUS current
+ DESCRIPTION "Generated when a critical alarm clears."
+-- ::= {tmonV2XM 11}
+ ::= {tmonXM 11}
+
+tmonV2MJalarmSet NOTIFICATION-TYPE
+ OBJECTS { tmonV2ASite, tmonV2ADesc, tmonV2AState, tmonV2ASeverity, tmonV2AChgDate,
+ tmonV2AChgTime, tmonV2AAuxDesc, tmonV2ADispDesc, tmonV2APntType,
+ tmonV2APort, tmonV2AAddress, tmonV2ADisplay, tmonV2APoint, tmonV2CEvent,
+ tmonV2AIPAddr, tmonV2ADevDesc }
+ STATUS current
+ DESCRIPTION "Generated when a major alarm is set."
+-- ::= {tmonV2XM 12}
+ ::= {tmonXM 12}
+
+tmonV2MJalarmClr NOTIFICATION-TYPE
+ OBJECTS { tmonV2ASite, tmonV2ADesc, tmonV2AState, tmonV2ASeverity, tmonV2AChgDate,
+ tmonV2AChgTime, tmonV2AAuxDesc, tmonV2ADispDesc, tmonV2APntType,
+ tmonV2APort, tmonV2AAddress, tmonV2ADisplay, tmonV2APoint, tmonV2CEvent,
+ tmonV2AIPAddr, tmonV2ADevDesc }
+ STATUS current
+ DESCRIPTION "Generated when a major alarm clears."
+-- ::= {tmonV2XM 13}
+ ::= {tmonXM 13}
+
+tmonV2MNalarmSet NOTIFICATION-TYPE
+ OBJECTS { tmonV2ASite, tmonV2ADesc, tmonV2AState, tmonV2ASeverity, tmonV2AChgDate,
+ tmonV2AChgTime, tmonV2AAuxDesc, tmonV2ADispDesc, tmonV2APntType,
+ tmonV2APort, tmonV2AAddress, tmonV2ADisplay, tmonV2APoint, tmonV2CEvent,
+ tmonV2AIPAddr, tmonV2ADevDesc }
+ STATUS current
+ DESCRIPTION "Generated when a minor alarm is set."
+-- ::= {tmonV2XM 14}
+ ::= {tmonXM 14}
+
+tmonV2MNalarmClr NOTIFICATION-TYPE
+ OBJECTS { tmonV2ASite, tmonV2ADesc, tmonV2AState, tmonV2ASeverity, tmonV2AChgDate,
+ tmonV2AChgTime, tmonV2AAuxDesc, tmonV2ADispDesc, tmonV2APntType,
+ tmonV2APort, tmonV2AAddress, tmonV2ADisplay, tmonV2APoint, tmonV2CEvent,
+ tmonV2AIPAddr, tmonV2ADevDesc }
+ STATUS current
+ DESCRIPTION "Generated when a minor alarm clears."
+-- ::= {tmonV2XM 15}
+ ::= {tmonXM 15}
+
+tmonV2STalarmSet NOTIFICATION-TYPE
+ OBJECTS { tmonV2ASite, tmonV2ADesc, tmonV2AState, tmonV2ASeverity, tmonV2AChgDate,
+ tmonV2AChgTime, tmonV2AAuxDesc, tmonV2ADispDesc, tmonV2APntType,
+ tmonV2APort, tmonV2AAddress, tmonV2ADisplay, tmonV2APoint, tmonV2CEvent,
+ tmonV2AIPAddr, tmonV2ADevDesc }
+ STATUS current
+ DESCRIPTION "Generated when a status alarm is set."
+-- ::= {tmonV2XM 16}
+ ::= {tmonXM 16}
+
+tmonV2STalarmClr NOTIFICATION-TYPE
+ OBJECTS { tmonV2ASite, tmonV2ADesc, tmonV2AState, tmonV2ASeverity, tmonV2AChgDate,
+ tmonV2AChgTime, tmonV2AAuxDesc, tmonV2ADispDesc, tmonV2APntType,
+ tmonV2APort, tmonV2AAddress, tmonV2ADisplay, tmonV2APoint, tmonV2CEvent,
+ tmonV2AIPAddr, tmonV2ADevDesc }
+ STATUS current
+ DESCRIPTION "Generated when a status alarm clears."
+-- ::= {tmonV2XM 17}
+ ::= {tmonXM 17}
+
+--dpsRTUv2PointSet NOTIFICATION-TYPE
+-- OBJECTS { sysDescr, sysLocation, dpsRTUv2DateTime,
+-- dpsRTUv2APort, dpsRTUv2AAddress, dpsRTUv2ADisplay, dpsRTUv2APoint,
+-- dpsRTUv2APntDesc, dpsRTUv2AState }
+-- STATUS current
+-- DESCRIPTION "Generated when a point is set."
+-- ::= {dpsRTUv2 20}
+--
+--dpsRTUv2PointClr NOTIFICATION-TYPE
+-- OBJECTS { sysDescr, sysLocation, dpsRTUv2DateTime,
+-- dpsRTUv2APort, dpsRTUv2CAddress, dpsRTUv2ADisplay, dpsRTUv2APoint,
+-- dpsRTUv2APntDesc, dpsRTUv2AState }
+-- STATUS current
+-- DESCRIPTION "Generated when a point clears."
+-- ::= {dpsRTUv2 21}
+--
+--dpsRTUv2sumPSet NOTIFICATION-TYPE
+-- OBJECTS { sysDescr, sysLocation, dpsRTUv2DateTime }
+-- STATUS current
+-- DESCRIPTION "Generated when any point is set."
+-- ::= {dpsRTUv2 101}
+--
+--dpsRTUv2sumPClr NOTIFICATION-TYPE
+-- OBJECTS { sysDescr, sysLocation, dpsRTUv2DateTime }
+-- STATUS current
+-- DESCRIPTION "Generated when all points clear."
+-- ::= {dpsRTUv2 102}
+--
+--dpsRTUv2comFailed NOTIFICATION-TYPE
+-- OBJECTS { sysDescr, sysLocation, dpsRTUv2DateTime }
+-- STATUS current
+-- DESCRIPTION "Generated when polled unit fails to respond."
+-- ::= {dpsRTUv2 103}
+--
+--dpsRTUv2comRestored NOTIFICATION-TYPE
+-- OBJECTS { sysDescr, sysLocation, dpsRTUv2DateTime }
+-- STATUS current
+-- DESCRIPTION "Generated when failed unit resumes responding."
+-- ::= {dpsRTUv2 104}
+--
+-- **************************************************************************
+-- Granular TRAP definitions
+--
+-- The following section supports granular trapping available on selected
+-- DPS remote telemetry units. This software selectable facility changes the
+-- trap sent by a remote so equipped. The standard trap identifies a SET or
+-- CLR event in the trap ID and binds variables identifying the specific
+-- remote point associated with the event. A granular trap identifies a SET
+-- or CLR event and the specific point associated with the event all in the
+-- trap ID. This is accomplished by mapping all SET event/points into the
+-- trap ID range 10001-19999 and all CLR event/points into the trap ID range
+-- 20001-29999.
+-- If the unit manages multiple displays, the displays are mapped
+-- sequentially with each display occupying a 64 point range. For example, a
+-- standalone standard or timestamp KDA which manages two displays, reports
+-- SET event/points in the first display (discrete alarm points) in the range
+-- 10001-10064. The CLR event/points for the same display would be reported
+-- in the range 20001-20064. The second display (controls & housekeeping
+-- alarm points) would have its SET event/points reported in the range 10065-
+-- 10128 and its CLR event/points reported in the range 20065-20128.
+-- SET and CLR definitions for the first 64 points have been included and
+-- can be used as is for driving most SNMP manager mechanisms designed to key
+-- on the trap ID for distinguishing and managing events. Additional events
+-- can be added simply by editing the following trap definitions prior to
+-- compiling this file into your SNMP manager. We recommend managing the SET
+-- and CLR event definitions for a specific point as a single unit and using
+-- the following simple rules:
+-- + Adjust the numeric portion of the label preceeding NOTIFICATION-TYPE.
+-- + Adjust the numeric reference in the DESCRIPTION text.
+-- + Adjust the number on the last line of the definition.
+--
+-- Using these rules a definition for the 65th point would be:
+--
+-- dpsRTUv2p0065Set NOTIFICATION-TYPE
+-- ENTERPRISE dpsRTUv2
+-- VARIABLES { sysDescr, sysLocation, dpsRTUv2DateTime,
+-- dpsRTUv2APort, dpsRTUv2CAddress, dpsRTUv2ADisplay, dpsRTUv2APoint,
+-- dpsRTUv2APntDesc, dpsRTUv2AState }
+-- DESCRIPTION "Generated when granular point 65 is set."
+-- ::= 10065
+--
+-- dpsRTUv2p0065Clr NOTIFICATION-TYPE
+-- ENTERPRISE dpsRTUv2
+-- VARIABLES { sysDescr, sysLocation, dpsRTUv2DateTime,
+-- dpsRTUv2APort, dpsRTUv2CAddress, dpsRTUv2ADisplay, dpsRTUv2APoint,
+-- dpsRTUv2APntDesc, dpsRTUv2AState }
+-- DESCRIPTION "Generated when granular point 65 clears."
+-- ::= 20065
+--
+-- This editing can can be accomplished quite easily using a plain ASCII
+-- file editor. The repetitive structure of the definitions also makes for
+-- rapid scripted or programmed generation if any such tools are available.
+-- A compressed file containing event/point definitions for 144 displays is
+-- available (DPS_G36.zip 150K) which uncompressed (DPS_G36.mib 6.2M) can be
+-- used for cut-and-paste editing if desired.
+-- The definitions can be further customized if desired by similar editing
+-- prior to compiling carefully observing the following conventions:
+-- + The label preceeding the NOTIFICATION-TYPE designator can be edited with some
+-- freedom but the label must be utterly unique among all trap definitions.
+-- + The ENTERPRISE and VARIABLES sections must not be changed.
+-- + The DESCRIPTION can be edited with complete freedom and is typically
+-- ignored within the context of standard SNMP manager trap handling. The
+-- quote mark before and after the text of the description are required.
+-- + The number on the last line of the definition is the actual trap ID
+-- defined and must also be utterly unique.
+--
+-- For example:
+--
+-- dpsRTUv2p0001Set NOTIFICATION-TYPE
+-- ENTERPRISE dpsRTUv2
+-- VARIABLES { sysDescr, sysLocation, dpsRTUv2DateTime,
+-- dpsRTUv2APort, dpsRTUv2CAddress, dpsRTUv2ADisplay, dpsRTUv2APoint,
+-- dpsRTUv2APntDesc, dpsRTUv2AState }
+-- DESCRIPTION "Generated when granular point 1 is set."
+-- ::= 10001
+--
+-- dpsRTUv2p0001Clr NOTIFICATION-TYPE
+-- ENTERPRISE dpsRTUv2
+-- VARIABLES { sysDescr, sysLocation, dpsRTUv2DateTime,
+-- dpsRTUv2APort, dpsRTUv2CAddress, dpsRTUv2ADisplay, dpsRTUv2APoint,
+-- dpsRTUv2APntDesc, dpsRTUv2AState }
+-- DESCRIPTION "Generated when granular point 1 clears."
+-- ::= 20001
+--
+-- Could be customized as:
+--
+-- dpsRTUv2FireAlarm NOTIFICATION-TYPE
+-- ENTERPRISE dpsRTUv2
+-- VARIABLES { sysDescr, sysLocation, dpsRTUv2DateTime,
+-- dpsRTUv2APort, dpsRTUv2CAddress, dpsRTUv2ADisplay, dpsRTUv2APoint,
+-- dpsRTUv2APntDesc, dpsRTUv2AState }
+-- DESCRIPTION "Generated when smoke detector activates."
+-- ::= 10001
+--
+-- dpsRTUv2FireOut NOTIFICATION-TYPE
+-- ENTERPRISE dpsRTUv2
+-- VARIABLES { sysDescr, sysLocation, dpsRTUv2DateTime,
+-- dpsRTUv2APort, dpsRTUv2CAddress, dpsRTUv2ADisplay, dpsRTUv2APoint,
+-- dpsRTUv2APntDesc, dpsRTUv2AState }
+-- DESCRIPTION "Generated when smoke detector deactivates."
+-- ::= 20001
+-- **************************************************************************
+
+
+END
|