diff options
Diffstat (limited to 'MIBS/dlink/DLINKSW-TIME-MIB')
| -rw-r--r-- | MIBS/dlink/DLINKSW-TIME-MIB | 443 |
1 files changed, 443 insertions, 0 deletions
diff --git a/MIBS/dlink/DLINKSW-TIME-MIB b/MIBS/dlink/DLINKSW-TIME-MIB new file mode 100644 index 0000000..0f0ea32 --- /dev/null +++ b/MIBS/dlink/DLINKSW-TIME-MIB @@ -0,0 +1,443 @@ +-- *****************************************************************
+-- DLINKSW-TIME-MIB.mib : D-Link Time MIB
+--
+-- Copyright (c) 2013 D-Link Corporation, all rights reserved.
+--
+-- *****************************************************************
+DLINKSW-TIME-MIB DEFINITIONS ::= BEGIN
+
+ IMPORTS
+ MODULE-IDENTITY,
+ OBJECT-TYPE,
+ Unsigned32
+ FROM SNMPv2-SMI
+ OBJECT-GROUP, MODULE-COMPLIANCE
+ FROM SNMPv2-CONF
+ TEXTUAL-CONVENTION,
+ DateAndTime,
+ TruthValue,
+ DisplayString,
+ RowStatus
+ FROM SNMPv2-TC
+ InterfaceIndexOrZero
+ FROM IF-MIB
+ InetAddressType,
+ InetAddress
+ FROM INET-ADDRESS-MIB
+ dlinkIndustrialCommon
+ FROM DLINK-ID-REC-MIB;
+
+
+ dlinkSwTimeMIB MODULE-IDENTITY
+ LAST-UPDATED "201308200000Z"
+ ORGANIZATION "D-Link Corp."
+ CONTACT-INFO
+ " D-Link Corporation
+
+ Postal: No. 289, Sinhu 3rd Rd., Neihu District,
+ Taipei City 114, Taiwan, R.O.C
+ Tel: +886-2-66000123
+ E-mail: tsd@dlink.com.tw
+ "
+ DESCRIPTION
+ "This MIB module defines objects for Time and Simple Network Time
+ Protocol (SNTP)."
+ REVISION "201303190000Z"
+ DESCRIPTION
+ "This is the first version of the MIB file.
+ "
+ REVISION "201308200000Z"
+ DESCRIPTION
+ "1.Add Year for date type of DlinkTimeSummerTimeValue .
+ 2.Fixed bugs of type error for dTimeSntpServerLastReceive."
+ ::= { dlinkIndustrialCommon 10 }
+
+ DlinkTimeSummerTimeValue ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "Denotes Summer Time starts or ends time.
+ This value is always interpreted within the context of a
+ dTimeSummerTimeAutoSwitchMode value.
+ When dTimeSummerTimeAutoSwitchMode is disable(1), this value is not
+ meaningful.
+ When dTimeSummerTimeAutoSwitchMode is recurring(2), the format is
+ defined as follows:
+ octets contents range
+ ------ -------- -------
+ 1 week 1..4, ff last = ff
+ 2 day 1..7 where Sunday = 1 Saturday = 7
+ 3 month 1..12 where January = 1 December = 12
+ 4 hour 0..23
+ 5 minute 0..59
+
+ For example, the first Feb at 13:30pm should be given as 01 02 0d 1e
+ For the last Tuesday in December at 1:20am should be given as ff 03 0c 01 14
+
+ When dTimeSummerTimeAutoSwitchMode is date(3), the format is defined as follows:
+
+ octets contents range
+ ------ -------- -------
+ 1-2 year 0..65536 in network-byte order
+ 3 month 1..12 where January = 1 December = 12
+ 4 date 1..31,
+ 5 hour 0..23
+ 6 minute 0..59
+
+ For example, the 2013-4-2 03:00 should be given as 07 dd 04 02 03 00
+ For the 2013-10-31 00:30 should be given as 07 dd 0a 1f 00 1e "
+ SYNTAX OCTET STRING (SIZE (0 | 5 | 6))
+
+-- -----------------------------------------------------------------------------
+ dTimeMIBNotifications OBJECT IDENTIFIER ::= { dlinkSwTimeMIB 0 }
+ dTimeMIBObjects OBJECT IDENTIFIER ::= { dlinkSwTimeMIB 1 }
+ dTimeMIBConformance OBJECT IDENTIFIER ::= { dlinkSwTimeMIB 2 }
+
+-- -----------------------------------------------------------------------------
+ dTimeGeneral OBJECT IDENTIFIER ::= { dTimeMIBObjects 1 }
+
+ dTimeSntpEnabled OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object indicates the state of SNTP function.
+ Setting this object to 'true' will enable SNTP function.
+ "
+ ::= { dTimeGeneral 1 }
+
+ dTimeSntpBcastClientEnabled OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object is used to enable/disable the broadcast client mode.
+ Setting this object to 'true' indicates that the agent accepts
+ broadcast SNTP traffic from servers.
+ "
+ ::= { dTimeGeneral 2 }
+
+ dTimeSntpPollInterval OBJECT-TYPE
+ SYNTAX Unsigned32 (30..99999)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object indicates the interval for the SNTP client to
+ synchronize its clock with server."
+ DEFVAL { 720 }
+ ::= { dTimeGeneral 3 }
+
+ dTimeSntpSourceIfIndex OBJECT-TYPE
+ SYNTAX InterfaceIndexOrZero
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object indicates the ifIndex of the interface whose IP address
+ will be used as the source address for sending the SNTP packet.
+ A special value of 0 indicates the source interface is not specified
+ and the IP address of the closest interface will be used.
+ "
+ ::= { dTimeGeneral 4 }
+
+-- -----------------------------------------------------------------------------
+ dTimeClock OBJECT IDENTIFIER ::= { dTimeMIBObjects 2 }
+
+ dTimeManagedClock OBJECT-TYPE
+ SYNTAX DateAndTime
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Use the object to manually set the system clock."
+ ::= { dTimeClock 1 }
+
+ dTimeCurrentTimeSource OBJECT-TYPE
+ SYNTAX INTEGER {
+ sntp(1),
+ noTimeSource(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The object indicates the clock source."
+ ::= { dTimeClock 2 }
+
+ dTimeCurrentTime OBJECT-TYPE
+ SYNTAX DateAndTime
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object indicates the current system time. System time can
+ be disciplined or adjusted by RTC, SNTP, or configured by user.
+ "
+ ::= { dTimeClock 3 }
+
+-- -----------------------------------------------------------------------------
+
+ dTimeSummerTime OBJECT IDENTIFIER ::= { dTimeClock 5 }
+
+ dTimeSummerTimeAutoSwitchMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ disable(1),
+ recurring(2),
+ date(3)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object indicates the mode of the system to automatically
+ switch to Summer Time (Daylight Saving Time).
+ disable(1) - The Daylight Saving Time feature is disabled.
+ recurring(2) - The Daylight Saving Time feature is enabled.
+ The Summer Time should start and end on the specified
+ week day of the specified month.
+ date(3) - The Daylight Saving Time feature is enabled.
+ The Summer Time should start and end on the specified date
+ of the specified month.
+ "
+ DEFVAL { disable }
+ ::= { dTimeSummerTime 1 }
+
+ dTimeSummerTimeStart OBJECT-TYPE
+ SYNTAX DlinkTimeSummerTimeValue
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object indicates when the Summer Time starts.
+ This value is always interpreted within the context of a
+ dTimeSummerTimeAutoSwitchMode value.
+ "
+ ::= { dTimeSummerTime 2 }
+
+ dTimeSummerTimeEnd OBJECT-TYPE
+ SYNTAX DlinkTimeSummerTimeValue
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object indicates when the Summer Time ends.
+ This value is always interpreted within the context of a
+ dTimeSummerTimeAutoSwitchMode value.
+ "
+ ::= { dTimeSummerTime 3 }
+
+ dTimeSummerTimeOffset OBJECT-TYPE
+ SYNTAX INTEGER (30|60|90|120)
+ UNITS "Minutes"
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The value of this object indicates number of minutes to add
+ or to subtract during Summer Time. This object is not meaningful
+ when dTimeSummerTimeAutoSwitchMode object is 'disable'."
+ DEFVAL { 60 }
+ ::= { dTimeSummerTime 4 }
+
+-- -----------------------------------------------------------------------------
+ dTimeServer OBJECT IDENTIFIER ::= { dTimeMIBObjects 3 }
+ dTimeSntpServerTableNum OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object indicates the number of entries present in the dTimeSntpServerTable."
+ ::= { dTimeServer 1 }
+
+ dTimeSntpServerTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF DTimeSntpServerEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table consists of a list of information for SNTP Time
+ servers, which allow the software clock to be synchronized."
+ ::= { dTimeServer 2 }
+
+ dTimeSntpServerEntry OBJECT-TYPE
+ SYNTAX DTimeSntpServerEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry contains information about an SNTP Time server."
+ INDEX {
+ dTimeSntpServerAddrType,
+ dTimeSntpServerAddr,
+ dTimeSntpServerVrfName
+ }
+ ::= { dTimeSntpServerTable 1 }
+
+ DTimeSntpServerEntry ::= SEQUENCE {
+ dTimeSntpServerAddrType InetAddressType,
+ dTimeSntpServerAddr InetAddress,
+ dTimeSntpServerVrfName DisplayString,
+ dTimeSntpServerRowStatus RowStatus,
+ dTimeSntpServerVersion Unsigned32,
+ dTimeSntpServerLastReceive Unsigned32,
+ dTimeSntpServerSynced TruthValue,
+ dTimeSntpServerBcast TruthValue
+ }
+
+ dTimeSntpServerAddrType OBJECT-TYPE
+ SYNTAX InetAddressType
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This object indicates the address type of the SNTP server."
+ ::= { dTimeSntpServerEntry 1 }
+
+ dTimeSntpServerAddr OBJECT-TYPE
+ SYNTAX InetAddress
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "IP or IPv6 address of the time server which provides the clock
+ synchronization."
+ ::= { dTimeSntpServerEntry 2 }
+
+ dTimeSntpServerVrfName OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This object indicates the name of the routing forwarding instance.
+ A zero length string indicates the VRF name is not specified.
+ For the platform that doesn't support VRF, only a zero length string
+ is allowed for this object.
+ "
+ ::= { dTimeSntpServerEntry 3 }
+
+ dTimeSntpServerRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The status of this entry."
+ ::= { dTimeSntpServerEntry 4 }
+
+ dTimeSntpServerVersion OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object indicates the SNTP server version. When
+ the value of dTimeSntpServerRowStatus at the same row is notInService(2),
+ this object is 0.
+ "
+ ::= { dTimeSntpServerEntry 5 }
+
+ dTimeSntpServerLastReceive OBJECT-TYPE
+ SYNTAX Unsigned32
+ UNITS "seconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object indicates the elapsed time that the SNTP time has
+ been synchronized.
+ "
+ ::= { dTimeSntpServerEntry 6 }
+
+ dTimeSntpServerSynced OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object indicates whether the corresponding server is the
+ current synced server.
+ "
+ ::= { dTimeSntpServerEntry 7 }
+
+ dTimeSntpServerBcast OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object indicates whether the server is a broadcast SNTP server.
+ "
+ ::= { dTimeSntpServerEntry 8 }
+
+
+-- ***************************************************************************
+-- Conformance
+-- ***************************************************************************
+ dTimeCompliances OBJECT IDENTIFIER ::= { dTimeMIBConformance 1 }
+
+ dTimeCompliance MODULE-COMPLIANCE
+ STATUS current
+ DESCRIPTION
+ "The compliance statement for entities which implement the
+ DLINKSW-TIME-MIB."
+ MODULE -- this module
+ MANDATORY-GROUPS {
+ dTimeSysInfoGroup
+ }
+
+ GROUP dTimeClockGroup
+ DESCRIPTION
+ "This group is conditionally mandatory and must be implemented by
+ the agent only if system clock can be manually configured."
+
+ GROUP dTimeSntpGroup
+ DESCRIPTION
+ "This group is conditionally mandatory and must be implemented by
+ the agent only if SNTP feature is supported."
+
+ GROUP dTimeSummerTimeCfgGroup
+ DESCRIPTION
+ "This group is conditionally mandatory and must be implemented by
+ the agent only if Daylight Saving Time feature is supported.
+ "
+ ::= { dTimeCompliances 1 }
+
+-- units of conformance
+ dTimeGroups OBJECT IDENTIFIER ::= { dTimeMIBConformance 2 }
+
+ dTimeSysInfoGroup OBJECT-GROUP
+ OBJECTS {
+ dTimeCurrentTimeSource,
+ dTimeCurrentTime
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects provides the information for system time."
+ ::= { dTimeGroups 1 }
+
+ dTimeClockGroup OBJECT-GROUP
+ OBJECTS {
+ dTimeManagedClock
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects provides configuration for system time."
+ ::= { dTimeGroups 2 }
+
+ dTimeSntpGroup OBJECT-GROUP
+ OBJECTS {
+ dTimeSntpEnabled,
+ dTimeSntpBcastClientEnabled,
+ dTimeSntpPollInterval,
+ dTimeSntpSourceIfIndex,
+ dTimeSntpServerTableNum,
+ dTimeSntpServerRowStatus,
+ dTimeSntpServerVersion,
+ dTimeSntpServerLastReceive,
+ dTimeSntpServerSynced,
+ dTimeSntpServerBcast
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects provides configuration for SNTP."
+ ::= { dTimeGroups 3 }
+
+ dTimeSummerTimeCfgGroup OBJECT-GROUP
+ OBJECTS {
+ dTimeSummerTimeAutoSwitchMode,
+ dTimeSummerTimeStart,
+ dTimeSummerTimeEnd,
+ dTimeSummerTimeOffset,
+ dTimeSntpServerTableNum,
+ dTimeSntpServerRowStatus
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects provides configuration for Daylight
+ Saving Time feature."
+ ::= { dTimeGroups 4 }
+
+
+END
|