diff options
Diffstat (limited to 'MIBS/dlink/DLINKSW-STORM-CTRL-MIB')
| -rw-r--r-- | MIBS/dlink/DLINKSW-STORM-CTRL-MIB | 415 |
1 files changed, 415 insertions, 0 deletions
diff --git a/MIBS/dlink/DLINKSW-STORM-CTRL-MIB b/MIBS/dlink/DLINKSW-STORM-CTRL-MIB new file mode 100644 index 0000000..4d2716a --- /dev/null +++ b/MIBS/dlink/DLINKSW-STORM-CTRL-MIB @@ -0,0 +1,415 @@ +-- *****************************************************************
+-- DLINKSW-STORM-CTRL-MIB.mib : Storm Control MIB
+--
+-- Copyright (c) 2013 D-Link Corporation, all rights reserved.
+--
+-- *****************************************************************
+DLINKSW-STORM-CTRL-MIB DEFINITIONS ::= BEGIN
+
+ IMPORTS
+ MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
+ Integer32
+ FROM SNMPv2-SMI
+ MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
+ FROM SNMPv2-CONF
+ ifIndex, InterfaceIndex
+ FROM IF-MIB
+ Unsigned32
+ FROM SNMPv2-SMI
+ dlinkIndustrialCommon
+ FROM DLINK-ID-REC-MIB;
+
+ dlinkSwStormCtrlMIB MODULE-IDENTITY
+ LAST-UPDATED "201306130000Z"
+ ORGANIZATION "D-Link Corp."
+ CONTACT-INFO
+ " D-Link Corporation
+
+ Postal: No. 289, Sinhu 3rd Rd., Neihu District,
+ Taipei City 114, Taiwan, R.O.C
+ Tel: +886-2-66000123
+ E-mail: tsd@dlink.com.tw
+ "
+ DESCRIPTION
+ "This MIB module defines objects for Storm Control"
+
+ REVISION "201306130000Z"
+ DESCRIPTION
+ "This is the first version of the MIB file for 'Storm Control'
+ functionality."
+ ::= { dlinkIndustrialCommon 25 }
+
+
+
+ DStormCtlTrafficType ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "The type of storm control traffic type.
+ broadcast(1) - broadcast storm.
+ multicast(2) - including unknown L2 multicast, known L2
+ multicast, unknown IP multicast and known
+ IP multicast.
+ unicast(3) - when the action is configured as 'shutdown mode',
+ unicast refers to both known and unknown
+ unicast packet; Otherwise, unicast refers to
+ unknown unicast packet. "
+ SYNTAX INTEGER {
+ broadcast(1),
+ multicast(2),
+ unicast(3)
+ }
+
+ DStormCtlThrType ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "The type of storm control threshold is configured on an interface.
+ pps(1) - the threshold is configured as packet count per second.
+ kbps(2) - the threshold is configured as a rate of bits per second.
+ percentage(3) - the threshold is configured as a percentage of total
+ bandwidth per port.
+ "
+ SYNTAX INTEGER {
+ pps(1),
+ kbps(2),
+ percentage(3)
+ }
+
+ DStormCtlThrTypeValue ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "Denotes a generic threshold value.
+
+ A DStormCtlThrTypeValue value is always interpreted within the context
+ of a DStormCtlThrType value. Every usage of the DStormCtlThrTypeValue
+ textual convention is required to specify the DStormCtlThrType
+ object that provides the context.
+ The unit and valid range are as follows:
+ Threshold Type Unit Valid Range
+ ============= ===================== =================
+ pps packet per second 1 ~ 2147483647
+ kbps bits per second 1 ~ 2147483647
+ percentage percentage 1 ~ 100
+
+ The special value of -1 indicates this object is undefined.
+ "
+ SYNTAX Integer32
+
+
+
+ dStormCtrlMIBNotifications OBJECT IDENTIFIER ::= { dlinkSwStormCtrlMIB 0 }
+ dStormCtrlMIBObjects OBJECT IDENTIFIER ::= { dlinkSwStormCtrlMIB 1 }
+ dStormCtrlMIBConformance OBJECT IDENTIFIER ::= { dlinkSwStormCtrlMIB 2 }
+
+-- --------------------------------------------------------------------------
+ dStormCtrlGentrl OBJECT IDENTIFIER ::= { dStormCtrlMIBObjects 1 }
+
+ dStormCtrlNotifyEnable OBJECT-TYPE
+ SYNTAX INTEGER {
+ none (1),
+ stormOccurred (2),
+ stormCleared (3),
+ both (4)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object controls when a storm control notification will be generated.
+
+ If the object is set to
+ none(1): No notifications will be generated.
+ stormOccurred(2): A notification will be generated when a storm event is
+ detected.
+ stormCleared(3): A notification will be generated when a storm event is
+ cleared.
+ both (4): A notification will be generated both when a storm event is
+ detected and cleared.
+ NOTE:The default value of this object is none(1)."
+ ::= { dStormCtrlGentrl 1}
+
+ dStormCtrlPollingInterval OBJECT-TYPE
+ SYNTAX Unsigned32 (5..600)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The interval, in seconds, the switch detects the storm."
+ DEFVAL { 5 }
+ ::= { dStormCtrlGentrl 2}
+
+ dStormCtrlPollingRetries OBJECT-TYPE
+ SYNTAX Integer32 (-1 | 0 | 1.. 360)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Specify the retry count. If the action is configured
+ as 'shutdown' mode and storm keep as long as
+ interval * retries, the port will enters error-disabled state.
+
+ The effective range is from 1 to 360.
+
+ 0 means that a 'shutdown' mode port will directly enter
+ error-disabled state when storm is detected.
+
+ -1 means that a 'shutdown' mode port will never enter
+ error-disabled state even if storm is detected."
+ DEFVAL { 3 }
+ ::= { dStormCtrlGentrl 3}
+
+-- --------------------------------------------------------------------------
+ dStormCtrlThresholdTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF DStormCtrlThresholdEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table consists of a list of interface-specific threshold
+ configuration for storm control."
+ ::= { dStormCtrlMIBObjects 2 }
+
+ dStormCtrlThresholdEntry OBJECT-TYPE
+ SYNTAX DStormCtrlThresholdEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry presents threshold configuration on an interface."
+ INDEX {
+ ifIndex,
+ dStormCtrlTrafficType
+ }
+ ::= { dStormCtrlThresholdTable 1 }
+
+ DStormCtrlThresholdEntry ::= SEQUENCE {
+ dStormCtrlTrafficType DStormCtlTrafficType,
+ dStormCtrlThresholdType DStormCtlThrType,
+ dStormCtrlRiseThresholdValue DStormCtlThrTypeValue,
+ dStormCtrlLowThresholdValue DStormCtlThrTypeValue
+ }
+
+ dStormCtrlTrafficType OBJECT-TYPE
+ SYNTAX DStormCtlTrafficType
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This object indicates the traffic type of the entry."
+ ::= { dStormCtrlThresholdEntry 1 }
+
+ dStormCtrlThresholdType OBJECT-TYPE
+ SYNTAX DStormCtlThrType
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object indicates the threshold type of the entry."
+ ::= { dStormCtrlThresholdEntry 2 }
+
+ dStormCtrlRiseThresholdValue OBJECT-TYPE
+ SYNTAX DStormCtlThrTypeValue
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Specifies the rise threshold value of the entry.
+ A special value of -1 indicates the storm control of the
+ corresponding traffic type is not enabled on that interface.
+ "
+ ::= { dStormCtrlThresholdEntry 3 }
+
+ dStormCtrlLowThresholdValue OBJECT-TYPE
+ SYNTAX DStormCtlThrTypeValue
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Specifies the low level threshold.
+ A special value of -1 indicates low level is not specified.
+ The default value will be 80% of the value of the corresponding
+ dStormCtrlRiseThresholdValue if applicable."
+ ::= { dStormCtrlThresholdEntry 4 }
+
+-- --------------------------------------------------------------------------
+ dStormCtrlIfTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF DStormCtrlIfEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table consists of a list of interface-specific configuration for
+ storm control."
+ ::= { dStormCtrlMIBObjects 3 }
+
+ dStormCtrlIfEntry OBJECT-TYPE
+ SYNTAX DStormCtrlIfEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry presents storm control configuration on an interface.
+ "
+ INDEX { ifIndex }
+ ::= { dStormCtrlIfTable 1 }
+
+ DStormCtrlIfEntry ::= SEQUENCE {
+ dStormCtrlIfActionType INTEGER
+ }
+
+ dStormCtrlIfActionType OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(1),
+ shutdown(2),
+ drop(3)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Specify the action will be taken when storm occurs:
+ none(1) - Not filter the storm packets.
+ shutdown(2) - The storm-control shutdown the port when the rise threshold is reached.
+ drop(3) - The storm-control always discards packets that exceed the rise threshold."
+ ::= { dStormCtrlIfEntry 1 }
+
+-- --------------------------------------------------------------------------
+ dStormCtrlTrafficInfoTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF DStormCtrlTrafficInfoEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table consists of a list of status information for traffic types
+ on interfaces. Only the interface/traffic-type on which the storm
+ control is enabled will present on this table.
+ "
+ ::= { dStormCtrlMIBObjects 4 }
+
+ dStormCtrlTrafficInfoEntry OBJECT-TYPE
+ SYNTAX DStormCtrlTrafficInfoEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry presents the status of a traffic type on an interface."
+ INDEX {
+ ifIndex,
+ dStormCtrlTrafficType
+ }
+ ::= { dStormCtrlTrafficInfoTable 1 }
+
+ DStormCtrlTrafficInfoEntry ::= SEQUENCE {
+ dStormCtrlTrafficInfoStatus INTEGER,
+ dStormCtrlCurTrafficUnitType DStormCtlThrType,
+ dStormCtrlCurTrafficValue DStormCtlThrTypeValue
+ }
+
+ dStormCtrlCurTrafficUnitType OBJECT-TYPE
+ SYNTAX DStormCtlThrType
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object indicates the current traffic unit of the entry."
+ ::= { dStormCtrlTrafficInfoEntry 1 }
+
+ dStormCtrlCurTrafficValue OBJECT-TYPE
+ SYNTAX DStormCtlThrTypeValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicating the current traffic value on the interface.
+ "
+ ::= { dStormCtrlTrafficInfoEntry 2 }
+
+ dStormCtrlTrafficInfoStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ forwarding(1),
+ dropped(2),
+ errorDisabled(3),
+ linkDown(4),
+ inactive(5)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object indicates the current status of storm control on a
+ given interface for a given traffic type.
+ forwarding(1): no storm event has been detected.
+ dropped(2): a storm event has occurred and the storm traffic
+ exceeding the threshold is dropped.
+ errorDisabled(3): the port is disabled due to a storm.
+ linkDown(4): the port is physically linked down.
+ inactive(5): Indicates that storm control is not
+ enabled for the given traffic type.
+ "
+ ::= { dStormCtrlTrafficInfoEntry 3 }
+
+-- --------------------------------------------------------------------------
+ dStormCtrlNotifyInfo OBJECT IDENTIFIER ::= { dStormCtrlMIBObjects 5 }
+
+
+ dStormCtrlNotifyTrafficType OBJECT-TYPE
+ SYNTAX DStormCtlTrafficType
+ MAX-ACCESS accessible-for-notify
+ STATUS current
+ DESCRIPTION
+ "This object is used by dStormCtrlOccurred and dStormCtrlStormCleared
+ to indicate the traffic type of the occurred storm."
+ ::= { dStormCtrlNotifyInfo 1 }
+
+ -- --------------------------------------------------------------------------
+ dStormCtrlOccurred NOTIFICATION-TYPE
+ OBJECTS {
+ ifIndex,
+ dStormCtrlNotifyTrafficType
+ }
+ STATUS current
+ DESCRIPTION
+ "This trap is sent when dStormCtrlNotifyEnable is 'stormOccurred'
+ or 'both' and a storm is detected."
+ ::= { dStormCtrlMIBNotifications 1 }
+
+ dStormCtrlStormCleared NOTIFICATION-TYPE
+ OBJECTS {
+ ifIndex,
+ dStormCtrlNotifyTrafficType
+ }
+ STATUS current
+ DESCRIPTION
+ "This trap is sent when dStormCtrlNotifyEnable is 'stormCleared'
+ or 'both' and a storm is cleared."
+ ::= { dStormCtrlMIBNotifications 2 }
+
+-- ***************************************************************************
+-- Conformance
+-- ***************************************************************************
+ dStormCtrlCompliances OBJECT IDENTIFIER ::= { dStormCtrlMIBConformance 1 }
+
+ dStormCtrlCompliance MODULE-COMPLIANCE
+ STATUS current
+ DESCRIPTION
+ "The compliance statement for entities which implement the
+ DLINKSW-STORM-CTRL-MIB."
+ MODULE -- this module
+ MANDATORY-GROUPS { dStormCtrlBaiscGroup }
+ ::= { dStormCtrlCompliances 1 }
+
+ dStormCtrlGroup OBJECT IDENTIFIER ::= { dStormCtrlMIBConformance 2 }
+
+ dStormCtrlBaiscGroup OBJECT-GROUP
+ OBJECTS {
+ dStormCtrlNotifyEnable,
+ dStormCtrlPollingInterval,
+ dStormCtrlPollingRetries,
+ dStormCtrlThresholdType,
+ dStormCtrlRiseThresholdValue,
+ dStormCtrlLowThresholdValue,
+ dStormCtrlIfActionType,
+ dStormCtrlCurTrafficUnitType,
+ dStormCtrlCurTrafficValue,
+ dStormCtrlTrafficInfoStatus,
+ dStormCtrlNotifyTrafficType
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects providing the information for storm control"
+ ::= { dStormCtrlGroup 1 }
+
+ dStormCtrlNotifyGroup NOTIFICATION-GROUP
+ NOTIFICATIONS {
+ dStormCtrlOccurred,
+ dStormCtrlStormCleared
+ }
+ STATUS current
+ DESCRIPTION
+ "The collection of notifications used for storm control."
+ ::= { dStormCtrlGroup 2 }
+
+END
+
|