diff options
Diffstat (limited to 'MIBS/dlink/DLINKSW-QOS-MIB')
| -rw-r--r-- | MIBS/dlink/DLINKSW-QOS-MIB | 1980 |
1 files changed, 1980 insertions, 0 deletions
diff --git a/MIBS/dlink/DLINKSW-QOS-MIB b/MIBS/dlink/DLINKSW-QOS-MIB new file mode 100644 index 0000000..d462035 --- /dev/null +++ b/MIBS/dlink/DLINKSW-QOS-MIB @@ -0,0 +1,1980 @@ +-- *****************************************************************
+-- DLINKSW-QOS-MIB.mib : D-Link QoS MIB
+--
+-- Copyright (c) 2013 D-Link Corporation, all rights reserved.
+--
+-- *****************************************************************
+
+DLINKSW-QOS-MIB DEFINITIONS ::= BEGIN
+
+ IMPORTS
+ MODULE-IDENTITY,OBJECT-TYPE,Integer32,Unsigned32
+ FROM SNMPv2-SMI
+ RowStatus, DisplayString,TruthValue,TEXTUAL-CONVENTION
+ FROM SNMPv2-TC
+ MODULE-COMPLIANCE, OBJECT-GROUP
+ FROM SNMPv2-CONF
+ dot1dBasePort
+ FROM BRIDGE-MIB
+ dlinkIndustrialCommon
+ FROM DLINK-ID-REC-MIB;
+
+
+ dlinkSwQosMIB MODULE-IDENTITY
+ LAST-UPDATED "201307090000Z"
+ ORGANIZATION "D-Link Corp."
+ CONTACT-INFO
+ " D-Link Corporation
+ Postal: No. 289, Sinhu 3rd Rd., Neihu District,
+ Taipei City 114, Taiwan, R.O.C
+ Tel: +886-2-66000123
+ E-mail: tsd@dlink.com.tw
+ "
+ DESCRIPTION
+ "The Structure of QoS Infomation for the
+ proprietary enterprise."
+ REVISION "201302210000Z"
+ DESCRIPTION
+ "Initial version of this MIB module."
+ REVISION "201305300000Z"
+ DESCRIPTION
+ "1.Add a new parameter, percent <value 1-100 >, to set the rate by percentage.
+ -- dQosBandwidthRxRateMode,dQosBandwidthTxRateMode,
+ -- dQosQueueBandwidthMinRateMode,dQosQueueBandwidthMinRateMode
+ 2.change the value range of
+ -- dQosBandwidthRxRate,dQosBandwidthTxRate,
+ -- dQosQueueBandwidthMinRate,dQosQueueBandwidthMaxRate
+ "
+ REVISION "201307090000Z"
+ DESCRIPTION
+ "1.Add police action: replaceCos,replaceAll
+ -- DlinkQosPoliceActionType
+ -- dQosAggPolicerEntry
+ -- dQosAggPolicerConformReplaceCos
+ -- dQosAggPolicerExceedReplaceCos
+ -- dQosAggPolicerViolateReplaceCos
+ -- dQosPoliceEntry
+ -- dQosPoliceConformReplaceCos
+ -- dQosPoliceExceedReplaceCos
+ -- dQosPoliceViolateReplaceCos
+ "
+ ::= { dlinkIndustrialCommon 61 }
+
+
+ DlinkQosPoliceActionType ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "A value represents a type of policing action.
+ notApplicable - The action is not specified or not applicable.
+ drop - drop the packet.
+ permit - transmit the packet.
+ replaceDscp - Replace the DSCP value of packet with the configured value.
+ The new DSCP value must be accompanied for use with
+ DlinkQosPoliceActionType.
+ replaceCos - Replace the COS value of packet with the configured value.
+ The new COS value must be accompanied for use with
+ DlinkQosPoliceActionType.
+ replaceAll - Replace both the DSCP and COS value of packet with the
+ configured value.
+ "
+ SYNTAX INTEGER {
+ notApplicable(0),
+ drop(1),
+ permit(2),
+ replaceDscp(3),
+ replaceCos(4),
+ replaceAll(5)
+ }
+
+-- -----------------------------------------------------------------------------
+ dQosMIBNotifications OBJECT IDENTIFIER ::= { dlinkSwQosMIB 0 }
+ dQosMIBObjects OBJECT IDENTIFIER ::= { dlinkSwQosMIB 1 }
+ dQosMIBConformance OBJECT IDENTIFIER ::= { dlinkSwQosMIB 2 }
+
+-- -----------------------------------------------------------------------------
+ dQosClassMap OBJECT IDENTIFIER ::= { dQosMIBObjects 1 }
+ dQosPolicyMap OBJECT IDENTIFIER ::= { dQosMIBObjects 2 }
+ dQosServicePolicy OBJECT IDENTIFIER ::= { dQosMIBObjects 3 }
+ dQosScheduling OBJECT IDENTIFIER ::= { dQosMIBObjects 4 }
+ dQosBandwidthCtrl OBJECT IDENTIFIER ::= { dQosMIBObjects 5 }
+ dQosQueueBandwidthCtrl OBJECT IDENTIFIER ::= { dQosMIBObjects 6 }
+
+ dQosQueuingCfg OBJECT IDENTIFIER ::= { dQosMIBObjects 7 }
+ dQosDscpMap OBJECT IDENTIFIER ::= { dQosMIBObjects 8 }
+ dQosCosMap OBJECT IDENTIFIER ::= { dQosMIBObjects 9 }
+
+-- -----------------------------------------------------------------------------
+ dQosPolicyMapTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF DQosPolicyMapEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table consists of a list of QoS policy maps."
+ ::= { dQosPolicyMap 1 }
+
+ dQosPolicyMapEntry OBJECT-TYPE
+ SYNTAX DQosPolicyMapEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry defines a QoS policy map."
+ INDEX { dQosPolicyMapName }
+ ::= { dQosPolicyMapTable 1 }
+
+ DQosPolicyMapEntry ::= SEQUENCE {
+ dQosPolicyMapName DisplayString,
+ dQosPolicyMapRowStatus RowStatus
+ }
+
+ dQosPolicyMapName OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(1..32))
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This object indicates name of the policy map."
+ ::= { dQosPolicyMapEntry 1 }
+
+ dQosPolicyMapRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object indicates the status of this entry."
+ ::= { dQosPolicyMapEntry 2 }
+
+-- -----------------------------------------------------------------------------
+ dQosPolicyMapCfgTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF DQosPolicyMapCfgEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table consists of a list of QoS policies for the class in a
+ policy map."
+ ::= { dQosPolicyMap 2 }
+
+ dQosPolicyMapCfgEntry OBJECT-TYPE
+ SYNTAX DQosPolicyMapCfgEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry consists QoS policies regarding setting the new precedence
+ field, DSCP field, and CoS field of the out-going packet.
+ The first two index elements identify the policy map class to which
+ the setting policies belong.
+ Multiple objects in a same row can be set for a class if they are not
+ conflicting. As an example of conflicting setting: precedence and DSCP
+ cannot be set at a same row.
+ "
+ INDEX {
+ dQosPolicyMapName,
+ dQosClassMapName
+ }
+ ::= { dQosPolicyMapCfgTable 1 }
+
+ DQosPolicyMapCfgEntry ::= SEQUENCE {
+ dQosPolicyMapCfgSetCosQueue Integer32,
+ dQosPolicyMapCfgSetCos Integer32,
+ dQosPolicyMapCfgSetDscpOnlyIp TruthValue,
+ dQosPolicyMapCfgSetDscp Integer32,
+ dQosPolicyMapCfgSetPreceOnlyIp TruthValue,
+ dQosPolicyMapCfgSetPrecedence Integer32,
+ dQosPolicyMapCfgRowStatus RowStatus
+ }
+
+ dQosPolicyMapCfgSetCosQueue OBJECT-TYPE
+ SYNTAX Integer32 (-1 | 0..7)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Indicates the new CoS queue.
+ The special value of -1 means the setting is un-configured."
+ DEFVAL {-1}
+ ::= { dQosPolicyMapCfgEntry 1 }
+
+ dQosPolicyMapCfgSetCos OBJECT-TYPE
+ SYNTAX Integer32 (-1 | 0..7 )
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Indicates the new Cos.
+ The special value of -1 means the setting is un-configured."
+ DEFVAL {-1}
+ ::= { dQosPolicyMapCfgEntry 2 }
+
+ dQosPolicyMapCfgSetDscpOnlyIp OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object indicates whether only remark IPv4 DSCP.
+ 'true' - Only IPv4 DSCP will be marked.
+ 'false'- Both IPv4 and IPv6 DSCP will be marked.
+ This object is meaningful only when dQosPolicyMapCfgSetDscp is configured.
+ "
+ DEFVAL { false }
+ ::= { dQosPolicyMapCfgEntry 3 }
+
+ dQosPolicyMapCfgSetDscp OBJECT-TYPE
+ SYNTAX Integer32 ( -1 | 0..63 )
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Indicates the new DSCP.
+ The special value of -1 means the setting is un-configured."
+ DEFVAL {-1}
+ ::= { dQosPolicyMapCfgEntry 4 }
+
+ dQosPolicyMapCfgSetPreceOnlyIp OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object indicates whether only remark IPv4 precedence.
+ 'true' - Ipv4 precedence will be marked.
+ 'false' - Both IPv4 and IPv6 precedence will be marked. For IPv6
+ packets, the precedence is most three significant bits of
+ traffic class of IPv6 header.
+ This object is meaningful only when dQosPolicyMapCfgSetPrecedence is configured.
+ "
+ DEFVAL { false }
+ ::= { dQosPolicyMapCfgEntry 5 }
+
+ dQosPolicyMapCfgSetPrecedence OBJECT-TYPE
+ SYNTAX Integer32 (-1 | 0..7 )
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Indicates the new ip precedence.
+ The special value of -1 means the setting is un-configured."
+ DEFVAL {-1}
+ ::= { dQosPolicyMapCfgEntry 6 }
+
+ dQosPolicyMapCfgRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object indicates the status of this entry."
+ ::= { dQosPolicyMapCfgEntry 7 }
+
+-- -----------------------------------------------------------------------------
+ dQosClassMapTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF DQosClassMapEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table consists of a list of QoS type class map."
+ ::= { dQosClassMap 1 }
+
+ dQosClassMapEntry OBJECT-TYPE
+ SYNTAX DQosClassMapEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry defines a QoS class map."
+ INDEX { dQosClassMapName }
+ ::= { dQosClassMapTable 1 }
+
+ DQosClassMapEntry ::= SEQUENCE {
+ dQosClassMapName DisplayString,
+ dQosClassMapType INTEGER,
+ dQosClassMapRowStaus RowStatus
+ }
+
+ dQosClassMapName OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(1..32))
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This object indicates the name of the class map."
+ ::= { dQosClassMapEntry 1 }
+
+ dQosClassMapType OBJECT-TYPE
+ SYNTAX INTEGER {
+ matchAny(1),
+ matchAll(2)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object indicates how to evaluate multiple match criteria.
+ matchAny - statements in the class map will be evaluated based on
+ the logical OR.
+ matchAll - statements in the class map will be evaluated based on
+ the logical AND."
+ DEFVAL { matchAny }
+ ::= { dQosClassMapEntry 2 }
+
+ dQosClassMapRowStaus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object indicates the status of this entry."
+ ::= { dQosClassMapEntry 3 }
+
+-- -----------------------------------------------------------------------------
+ dQosClassMapCfgTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF DQosClassMapCfgEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table consists of a list of criteria for class maps."
+ ::= { dQosClassMap 2 }
+
+ dQosClassMapCfgEntry OBJECT-TYPE
+ SYNTAX DQosClassMapCfgEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry defines a match criterion for a class map. The first index element
+ identifies the class map to which the criterion belongs.
+ "
+ INDEX {
+ dQosClassMapName,
+ dQosClassMapCfgMatchId
+ }
+ ::= { dQosClassMapCfgTable 1 }
+
+ DQosClassMapCfgEntry ::= SEQUENCE {
+ dQosClassMapCfgMatchId Integer32,
+ dQosClassMapCfgMatchType INTEGER,
+ dQosClassMapCfgMatchValue OCTET STRING,
+ dQosClassMapCfgRowStaus RowStatus
+ }
+
+ dQosClassMapCfgMatchId OBJECT-TYPE
+ SYNTAX Integer32 (0..65535)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This index is automatically assigned for the match criterion in a
+ class map.
+ "
+ ::= { dQosClassMapCfgEntry 1 }
+
+ dQosClassMapCfgMatchType OBJECT-TYPE
+ SYNTAX INTEGER {
+ accessList(1),
+ cos(2),
+ innerCos(3),
+ dscp(4),
+ ipDscp(5),
+ precedence(6),
+ ipPrecedence(7),
+ protocol(8),
+ vlan(9),
+ innerVlan(10)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object indicates the matching type of the entry.
+ A QoS class map can contain multiple match statements.
+
+ The dQosClassMapMatchType determines the valid range
+ and value of dQosClassMapMatchValue.
+
+ accessList - Uses an access-list as matching criterion.
+ cos - matching IEEE 802.1Q CoS value
+ innerCos - matching innermost CoS value of QinQ packets
+ dscp - matching DSCP value and this criterion is applied for IPv4
+ and IPv6 packets.
+ ipDscp - matching DSCP of IPv4 packets only.
+ precedence - matching precedence and this criterion is applied for IPv4
+ and IPv6 packets.
+ ipPrecedence - matching precedence of IPv4 packets only.
+ protocol - matching protocol.
+ vlan - matching VLAN ID.
+ innerVlan - matching innermost VLAN ID.
+ "
+ ::= { dQosClassMapCfgEntry 2 }
+
+ dQosClassMapCfgMatchValue OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(1..32))
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "A dQosClassMapMatchValue is always interpreted within the context of
+ a dQosClassMapMatchType value.
+
+ The table below explains how to determine the values and ranges of
+ dQosClassMapMatchValue.
+ QoS class map match configuration table
+ ====================================================
+ Match Type Element Value
+ dQosClassMapMatchType dQosClassMapMatchValue
+ ======================= ============================
+ accessList DisplayString (SIZE(1..32)) (Note #1)
+ cos OCTET STRING (SIZE(1)) (Note #2)
+ innerCos OCTET STRING (SIZE(1)) (Note #2)
+ dscp OCTET STRING (SIZE(8)) (Note #3)
+ ipDscp OCTET STRING (SIZE(8)) (Note #3)
+ precedence OCTET STRING (SIZE(1)) (Note #4)
+ ipPrecedence OCTET STRING (SIZE(1)) (Note #4)
+ protocol DisplayString (Note #5)
+ vlan OCTET STRING (SIZE(2)) (Note #6)
+ innerVlan OCTET STRING (SIZE(2)) (Note #6)
+ ===================================================================
+ Note#1: This object indicates the name of the access-list to be matched.
+ Note#2: The one octet specifies eight CoSs. The most significant
+ bit represents CoS 0 and the least significant bit represents
+ CoS 7. If the corresponding bit is '1' indicates that CoS is
+ included in the criterion; '0' means the CoS is not included.
+ Note#3: The eight octets specify 64 DSCPs. Each octet within this
+ value specifies a set of eight DSCPs. The first octet specifies
+ first 8 DSCPs: 0 - 7, the second octet specifies the next 8 DSCPs,
+ etc. Within each octet, the most significant bit represents the
+ lowest numbered DSCP, and the least significant bit represents the
+ highest numbered DSCP. If the corresponding bit is '1' indicates
+ that DSCP is included in the criterion; '0' means the DSCP is not
+ included.
+ Note#4: The one octet specifies eight precedence values. The most significant
+ bit represents precedence 0 and the least significant bit
+ represents precedence 7. If the corresponding bit is '1'
+ indicates that precedence is included in the criterion; '0'
+ means the precedence is not included.
+ Note#5: The element value needs choose the exact case-sensitive string.
+ Supported Protocols that can be matched:
+ arp IP Address Resolution Protocol (ARP)
+ bgp Border Gateway Protocol
+ dhcp Dynamic Host Configuration
+ dns Domain Name Server lookup
+ egp Exterior Gateway Protocol
+ ftp File Transfer Protocol
+ ip (version 4)
+ ipv6 (version 6)
+ netbios NetBIOS
+ nfs Network File System
+ ntp Network Time Protocol
+ ospf Open Shortest Path First
+ pppoe Point-to-Point Protocol over Ethernet
+ rip Routing Information Protocol
+ rtsp Real-Time Streaming Protocol
+ ssh Secured shell
+ telnet Telnet
+ tftp Trivial File Transfer Protocol
+ Note#6: The element value is VLAN ID to be matched. The first octet indicates
+ the high byte of VLAN ID and the second octet indicates the low byte.
+ For example, VLAN ID 1029 is encoded in '0405'H.
+ "
+ ::= { dQosClassMapCfgEntry 3 }
+
+ dQosClassMapCfgRowStaus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object indicates the status of this entry.
+ "
+ ::= { dQosClassMapCfgEntry 5 }
+
+-- -----------------------------------------------------------------------------
+ dQosServicePolicyTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF DQosServicePolicyEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table consists of a list of interface-specific policy-map
+ associations."
+ ::= { dQosServicePolicy 1 }
+
+ dQosServicePolicyEntry OBJECT-TYPE
+ SYNTAX DQosServicePolicyEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry defines a policy-map association on an interface."
+ INDEX {
+ dot1dBasePort,
+ dQosServicePolicyDirection
+ }
+ ::= { dQosServicePolicyTable 1 }
+
+ DQosServicePolicyEntry ::=
+ SEQUENCE {
+ dQosServicePolicyDirection INTEGER,
+ dQosServicePolicyName DisplayString,
+ dQosServicePolicyRowStaus RowStatus
+ }
+
+ dQosServicePolicyDirection OBJECT-TYPE
+ SYNTAX INTEGER {
+ input(1),
+ output(2)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object indicates the direction of the policy map is applied:
+ input: for ingress flow
+ outout: for egress flow
+ "
+ ::= { dQosServicePolicyEntry 1 }
+
+ dQosServicePolicyName OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(1..32))
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Indicates the name of a service policy map to be attached."
+ ::= { dQosServicePolicyEntry 2 }
+
+ dQosServicePolicyRowStaus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object indicates the status of this entry."
+ ::= { dQosServicePolicyEntry 3 }
+
+-- -----------------------------------------------------------------------------
+ dQosSchedulingModeTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF DQosSchedulingModeEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table consists of a list of scheduling mechanism configurations
+ for ports."
+ ::= { dQosScheduling 1 }
+
+ dQosSchedulingModeEntry OBJECT-TYPE
+ SYNTAX DQosSchedulingModeEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry configures the scheduling mode on an interface."
+ INDEX { dot1dBasePort }
+ ::= { dQosSchedulingModeTable 1 }
+
+ DQosSchedulingModeEntry ::= SEQUENCE {
+ dQosSchedulingMode INTEGER
+ }
+
+ dQosSchedulingMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ sp(1),
+ rr(2),
+ wrr(3),
+ wdrr(4)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object indicates the mechanism of QoS scheduling on the interface.
+ "
+ ::= { dQosSchedulingModeEntry 2 }
+
+-- -----------------------------------------------------------------------------
+ dQosScheduleWrrWeightTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF DQosScheduleWrrWeightEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table consists of a list of configurations for WRR queue bandwidth
+ of queues.
+ "
+ ::= { dQosScheduling 2 }
+
+ dQosScheduleWrrWeightEntry OBJECT-TYPE
+ SYNTAX DQosScheduleWrrWeightEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry defines WRR weight of a queue on an interface.
+ An entry exists for each queue if the WRR bandwidth is configurable
+ on the queue.
+ "
+ INDEX {
+ dot1dBasePort,
+ dQosScheduleWrrWeightQueueId
+ }
+ ::= { dQosScheduleWrrWeightTable 1 }
+
+ DQosScheduleWrrWeightEntry ::= SEQUENCE {
+ dQosScheduleWrrWeightQueueId Unsigned32,
+ dQosScheduleWrrWeightValue Unsigned32
+ }
+
+ dQosScheduleWrrWeightQueueId OBJECT-TYPE
+ SYNTAX Unsigned32 (0..127)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This object indicates the queue ID of the entry."
+ ::= { dQosScheduleWrrWeightEntry 1 }
+
+ dQosScheduleWrrWeightValue OBJECT-TYPE
+ SYNTAX Unsigned32 ( 0 .. 127)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Specifies the weight in terms of frame count for the queue."
+ ::= { dQosScheduleWrrWeightEntry 2 }
+
+-- -----------------------------------------------------------------------------
+ dQosScheduleWdrrWeightTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF DQosScheduleWdrrWeightEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table consists of a list of configurations for WDRR queue bandwidth
+ of queues.
+ "
+ ::= { dQosScheduling 3 }
+
+ dQosScheduleWdrrWeightEntry OBJECT-TYPE
+ SYNTAX DQosScheduleWdrrWeightEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry defines WDRR weight of a queue on an interface.
+ An entry exists for each queue if the WDRR bandwidth is configurable
+ on the queue.
+ "
+ INDEX {
+ dot1dBasePort,
+ dQosScheduleWdrrWeightQueueId
+ }
+ ::= { dQosScheduleWdrrWeightTable 1 }
+
+ DQosScheduleWdrrWeightEntry ::= SEQUENCE {
+ dQosScheduleWdrrWeightQueueId Unsigned32,
+ dQosScheduleWdrrWeightValue Unsigned32
+ }
+
+ dQosScheduleWdrrWeightQueueId OBJECT-TYPE
+ SYNTAX Unsigned32 (0..127)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This object indicates the queue ID of the entry."
+ ::= { dQosScheduleWdrrWeightEntry 1 }
+
+ dQosScheduleWdrrWeightValue OBJECT-TYPE
+ SYNTAX Unsigned32 (0..127)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Specifies the weight in terms of frame length count for the queue."
+ ::= { dQosScheduleWdrrWeightEntry 2 }
+
+-- -----------------------------------------------------------------------------
+ dQosBandwidthCtrlTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF DQosBandwidthCtrlEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table consists of a list of configurations for bandwidth control
+ on interfaces."
+ ::= { dQosBandwidthCtrl 1 }
+
+ dQosBandwidthCtrlEntry OBJECT-TYPE
+ SYNTAX DQosBandwidthCtrlEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry configures the bandwidth on an interface.
+ An entry will exist for every applicable port.
+ "
+ INDEX { dot1dBasePort }
+ ::= { dQosBandwidthCtrlTable 1 }
+
+ DQosBandwidthCtrlEntry ::= SEQUENCE {
+ dQosBandwidthRxRate Integer32,
+ dQosBandwidthRxBurst Integer32,
+ dQosBandwidthTxRate Integer32,
+ dQosBandwidthTxBurst Integer32,
+ dQosBandwidthRxRateMode INTEGER,
+ dQosBandwidthTxRateMode INTEGER
+ }
+
+ dQosBandwidthRxRate OBJECT-TYPE
+ SYNTAX Integer32 (-1 | 1..10240000)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object indicates Rx Rate of the specified port.
+ The special value of -1 indicates there is no bandwidth
+ limit for ingress packets.
+ It is based on the dQosBandwidthRxRateMode field and
+ if the dQosBandwidthRxRateMode selected as:
+ rate: means ingress rate limit(units:kbps) and the effective rangs are 8 ~ 10240000.
+ percent: means the percentage and the effective rangs are 1 ~ 100.
+ "
+ ::= { dQosBandwidthCtrlEntry 2 }
+
+ dQosBandwidthRxBurst OBJECT-TYPE
+ SYNTAX Integer32 ( -1 | 0..128000)
+ UNITS "kbyte"
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object indicates the limit for ingress burst traffic
+ in kilobytes.
+ The special value of -1 indicates the limit for
+ ingress burst traffic is unspecified and the limit will follow
+ the setting of dQosBandwidthRxRate.
+ "
+ ::= { dQosBandwidthCtrlEntry 3 }
+
+ dQosBandwidthTxRate OBJECT-TYPE
+ SYNTAX Integer32 (-1 | 1..10240000)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object indicates Tx Rate of the specified port.
+ The special value of -1 indicates there is no bandwidth
+ limit for egress packets.
+ It is based on the dQosBandwidthTxRateMode field and
+ if the dQosBandwidthTxRateMode selected as:
+ rate: means egress rate limit(units:kbps) and the effective rangs are 8 ~ 10240000.
+ percent: means the percentage and the effective rangs are 1 ~ 100.
+ "
+ ::= { dQosBandwidthCtrlEntry 4 }
+
+ dQosBandwidthTxBurst OBJECT-TYPE
+ SYNTAX Integer32 (-1 | 0..128000)
+ UNITS "kbyte"
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object indicates the limit for egress burst traffic
+ in kilobytes.
+ The special value of -1 indicates the limit for
+ egress burst traffic is unspecified and the limit will follow
+ the setting of dQosBandwidthTxRate.
+ "
+ ::= { dQosBandwidthCtrlEntry 5 }
+
+ dQosBandwidthRxRateMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ rate(1),
+ percent(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object indicates Rx Rate Mode.
+ It will indicate the field:dQosBandwidthRxRate attribute.
+ rate: means the rate limit.
+ percent: means the percentage."
+ ::= { dQosBandwidthCtrlEntry 6 }
+
+ dQosBandwidthTxRateMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ rate(1),
+ percent(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Indicates Tx Rate Mode.
+ It will indicate the field:dQosBandwidthTxRate attribute.
+ rate: means the rate limit.
+ percent: means the percentage."
+ ::= { dQosBandwidthCtrlEntry 7 }
+
+-- -----------------------------------------------------------------------------
+ dQosQueueBandwidthCtrlTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF DQosQueueBandwidthCtrlEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table contains information about queue-specific bandwidth
+ control of ports."
+ ::= { dQosQueueBandwidthCtrl 1 }
+
+ dQosQueueBandwidthCtrlEntry OBJECT-TYPE
+ SYNTAX DQosQueueBandwidthCtrlEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry contains bandwidth control information of a queue on
+ a port."
+ INDEX {
+ dot1dBasePort,
+ dQosQueueBandwidthQueId
+ }
+ ::= { dQosQueueBandwidthCtrlTable 1 }
+
+ DQosQueueBandwidthCtrlEntry ::= SEQUENCE {
+ dQosQueueBandwidthQueId Unsigned32,
+ dQosQueueBandwidthMinRate Integer32,
+ dQosQueueBandwidthMaxRate Integer32,
+ dQosQueueBandwidthMinRateMode INTEGER,
+ dQosQueueBandwidthMaxRateMode INTEGER
+ }
+
+ dQosQueueBandwidthQueId OBJECT-TYPE
+ SYNTAX Unsigned32 (0..127)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Indicates the queue ID of the entry."
+ ::= { dQosQueueBandwidthCtrlEntry 1 }
+
+ dQosQueueBandwidthMinRate OBJECT-TYPE
+ SYNTAX Integer32 ( -1 | 1..10240000)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Indicates the minimum rate of the specified port and queue.
+ A special value of -1 means no limit.
+ It is based on the dQosQueueBandwidthMinRateMode field and
+ if the dQosQueueBandwidthMinRateMode selected as:
+ rate: means egress Minimum Rate (units:kbps),range are 8 ~ 10240000.
+ percent: means the percentage and the effective rangs are 1 ~ 100."
+ ::= { dQosQueueBandwidthCtrlEntry 2 }
+
+ dQosQueueBandwidthMaxRate OBJECT-TYPE
+ SYNTAX Integer32 ( -1 | 1..10240000)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Indicates the maximum rate of the specified port and queue.
+ A special value of -1 means no limit.
+ It is based on the dQosQueueBandwidthMaxRateMode field and
+ if the dQosQueueBandwidthMaxRateMode selected as:
+ rate: means egress Maximum Rate (units:kbps),range are 8 ~ 10240000.
+ percent: means the percentage and the effective rangs are 1 ~ 100."
+ ::= { dQosQueueBandwidthCtrlEntry 3 }
+
+ dQosQueueBandwidthMinRateMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ rate(1),
+ percent(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Indicates the Minimum Rate Mode.
+ It will indicate the field:dQosQueueBandwidthMinRate attribute.
+ rate: means the Minimum Rate.
+ percent: means the percentage."
+ ::= { dQosQueueBandwidthCtrlEntry 4 }
+
+ dQosQueueBandwidthMaxRateMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ rate(1),
+ percent(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Indicates the Maximum Rate Mode.
+ It will indicate the field:dQosQueueBandwidthMaxRate attribute.
+ rate: means the Maximum Rate.
+ percent: means the percentage."
+ ::= { dQosQueueBandwidthCtrlEntry 5 }
+-- -----------------------------------------------------------------------------
+ dQosPortIfQueuingTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF DQosPortIfQueuingEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table provides port-specific configuration for QoS queuing.
+ "
+ ::= { dQosQueuingCfg 1 }
+
+ dQosPortIfQueuingEntry OBJECT-TYPE
+ SYNTAX DQosPortIfQueuingEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry consists of information for QoS queueing on a port."
+ INDEX { dot1dBasePort }
+ ::= { dQosPortIfQueuingTable 1 }
+
+ DQosPortIfQueuingEntry ::= SEQUENCE {
+ dQosPortIf8021pOverride TruthValue,
+ dQosPortIfTrustMode INTEGER
+ }
+
+ dQosPortIf8021pOverride OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object indicates whether override the CoS of the packets with
+ default CoS (dot1dPortDefaultUserPriority).
+ If this object is 'true', the default CoS will be applied to all
+ incoming packets, either tagged or untagged, received by the port."
+ REFERENCE
+ "dot1dPortDefaultUserPriority is defined in P-BRIDGE-MIB."
+ ::= { dQosPortIfQueuingEntry 1 }
+
+ dQosPortIfTrustMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ cos(1),
+ dscp(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object indicates QoS trust mode of the port."
+ ::= { dQosPortIfQueuingEntry 2 }
+
+
+-- -----------------------------------------------------------------------------
+ dQosDscpMutationMapTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF DQosDscpMutationMapEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table provides a mechanism to create/delete a DSCP mutation map."
+ ::= { dQosDscpMap 1 }
+
+ dQosDscpMutationMapEntry OBJECT-TYPE
+ SYNTAX DQosDscpMutationMapEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry (conceptual row) in the dQosDscpMutationMapTable."
+ INDEX { dQosDscpMutationMapName }
+ ::= { dQosDscpMutationMapTable 1 }
+
+ DQosDscpMutationMapEntry ::= SEQUENCE {
+ dQosDscpMutationMapName DisplayString,
+ dQosDscpMutationMapRowStatus RowStatus
+ }
+
+ dQosDscpMutationMapName OBJECT-TYPE
+ SYNTAX DisplayString(SIZE(1..32))
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This object indicates the name of the DSCP mutation map."
+ ::= { dQosDscpMutationMapEntry 1 }
+
+ dQosDscpMutationMapRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object indicates the status of this entry."
+ ::= { dQosDscpMutationMapEntry 2 }
+
+-- -----------------------------------------------------------------------------
+ dQosDscpMutationMapCfgTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF DQosDscpMutationMapCfgEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The table provides a list of the DSCP mapping of mutations maps.
+ "
+ ::= { dQosDscpMap 2 }
+
+ dQosDscpMutationMapCfgEntry OBJECT-TYPE
+ SYNTAX DQosDscpMutationMapCfgEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Each row contains the mapping from old DSCP value to new
+ DSCP value per specific mutation table.
+ The first index element identifies the mutation map
+ (dQosDscpMutationMapEntry) that a DSCP mapping (dQosDscpMutationMapCfgEntry)
+ belongs to.
+ When a mutation map is removed, the corresponding DSCP mapping
+ configuration will be deleted.
+ "
+ INDEX {
+ dQosDscpMutationMapName,
+ dQosDscpMutationOldDscp
+ }
+ ::= { dQosDscpMutationMapCfgTable 1 }
+
+ DQosDscpMutationMapCfgEntry ::= SEQUENCE {
+ dQosDscpMutationOldDscp Unsigned32,
+ dQosDscpMutationNewDscp Unsigned32
+ }
+
+ dQosDscpMutationOldDscp OBJECT-TYPE
+ SYNTAX Unsigned32 (0..63)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The old DSCP value."
+ ::= { dQosDscpMutationMapCfgEntry 1 }
+
+ dQosDscpMutationNewDscp OBJECT-TYPE
+ SYNTAX Unsigned32 (0..63)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object indicates the new DSCP value which the old
+ DSCP values maps to for a specific mutation map.
+ The default mapping of old DSCP to new DSCP for mutation
+ purpose is the identity function, i.e. dQosDscpMutationNewDscp
+ equals to dQosDscpMutationOldDscp
+ "
+ ::= { dQosDscpMutationMapCfgEntry 2 }
+
+-- -----------------------------------------------------------------------------
+ dQosDscpMutationMapAttachTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF DQosDscpMutationMapAttachEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table provides a mechanism to attach a DSCP mutation map to
+ a port."
+ ::= { dQosDscpMap 3 }
+
+ dQosDscpMutationMapAttachEntry OBJECT-TYPE
+ SYNTAX DQosDscpMutationMapAttachEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry contains associating DSCP mutation map information."
+ INDEX { dot1dBasePort }
+ ::= { dQosDscpMutationMapAttachTable 1 }
+
+ DQosDscpMutationMapAttachEntry ::= SEQUENCE {
+ dQosDscpMutationMapAttachName DisplayString
+ }
+
+ dQosDscpMutationMapAttachName OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..32))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object indicates the name of the attached mutation map.
+ A zero length of string indicates no mutation map is attached.
+ "
+ ::= { dQosDscpMutationMapAttachEntry 1 }
+
+-- -----------------------------------------------------------------------------
+ dQosDscpMapCtrlTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF DQosDscpMapCtrlEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table contains information about the mapping of DSCP to priority
+ and DSCP to color for mapping a packet's initial color."
+ ::= { dQosDscpMap 4 }
+
+ dQosDscpMapCtrlEntry OBJECT-TYPE
+ SYNTAX DQosDscpMapCtrlEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry contains DSCP mapping information."
+ INDEX {
+ dot1dBasePort,
+ dQosDscpMapCtrlDscp
+ }
+ ::= { dQosDscpMapCtrlTable 1 }
+
+ DQosDscpMapCtrlEntry ::= SEQUENCE {
+ dQosDscpMapCtrlDscp Unsigned32,
+ dQosDscpMapCtrlCos Unsigned32,
+ dQosDscpMapCtrlColor INTEGER
+ }
+
+ dQosDscpMapCtrlDscp OBJECT-TYPE
+ SYNTAX Unsigned32 (0..63)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This object indicates the DSCP of the entry."
+ ::= { dQosDscpMapCtrlEntry 1 }
+
+ dQosDscpMapCtrlCos OBJECT-TYPE
+ SYNTAX Unsigned32 (0..7)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object indicates the mapped CoS value.
+ Default mapping is:
+ DSCP CoS
+ 0-7 0
+ 8-15 1
+ 16-23 2
+ 24-31 3
+ 32-39 4
+ 40-47 5
+ 48-55 6
+ 56-63 7
+ "
+ ::= { dQosDscpMapCtrlEntry 2 }
+
+ dQosDscpMapCtrlColor OBJECT-TYPE
+ SYNTAX INTEGER {
+ green(1),
+ yellow(2),
+ red(3)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object indicates the mapped color to determine a packet's
+ initial color."
+ DEFVAL { green }
+ ::= { dQosDscpMapCtrlEntry 3 }
+
+-- -----------------------------------------------------------------------------
+ dQosCosToColorMapTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF DQosCosToColorMapEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table contains information about the mapping of CoS to color."
+ ::= { dQosCosMap 1 }
+
+ dQosCosToColorMapEntry OBJECT-TYPE
+ SYNTAX DQosCosToColorMapEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry contains a mapping between CoS to color."
+ INDEX {
+ dot1dBasePort,
+ dQosCosMapCos
+ }
+ ::= { dQosCosToColorMapTable 1 }
+
+ DQosCosToColorMapEntry ::= SEQUENCE {
+ dQosCosMapCos Unsigned32,
+ dQosCosMapColor INTEGER
+ }
+
+ dQosCosMapCos OBJECT-TYPE
+ SYNTAX Unsigned32 (0..7)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This object indicates the CoS of the entry."
+ ::= { dQosCosToColorMapEntry 1 }
+
+ dQosCosMapColor OBJECT-TYPE
+ SYNTAX INTEGER {
+ green(1),
+ yellow(2),
+ red(3)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object indicates the mapped color to determine a packet's
+ initial color."
+ ::= { dQosCosToColorMapEntry 2 }
+
+-- -----------------------------------------------------------------------------
+ dQosCosToQueueMapTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF DQosCosToQueueMapEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table contains information about the mapping of CoS
+ to queue."
+ ::= { dQosCosMap 2 }
+
+ dQosCosToQueueMapEntry OBJECT-TYPE
+ SYNTAX DQosCosToQueueMapEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry contains a mapping between CoS to queue."
+ INDEX { dQosCosToQueueCos }
+ ::= { dQosCosToQueueMapTable 1 }
+
+
+ DQosCosToQueueMapEntry ::= SEQUENCE {
+ dQosCosToQueueCos Unsigned32,
+ dQosCosToQueueQID Unsigned32
+ }
+
+ dQosCosToQueueCos OBJECT-TYPE
+ SYNTAX Unsigned32 (0..7)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This object indicates the CoS of the entry."
+ ::= { dQosCosToQueueMapEntry 1 }
+
+ dQosCosToQueueQID OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object indicates the queue ID that the corresponding CoS will
+ be queued."
+ ::= { dQosCosToQueueMapEntry 2 }
+
+-- -----------------------------------------------------------------------------
+ dQosAggPolicerTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF DQosAggPolicerEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table consists of a list of aggregate policers."
+ ::= { dQosPolicyMap 3 }
+
+ dQosAggPolicerEntry OBJECT-TYPE
+ SYNTAX DQosAggPolicerEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This entry consists of information and configurations for an
+ aggregate policer."
+ INDEX { dQosAggPolicerName }
+ ::= { dQosAggPolicerTable 1 }
+
+ DQosAggPolicerEntry ::= SEQUENCE {
+ dQosAggPolicerName DisplayString,
+ dQosAggPolicerType INTEGER,
+ dQosAggPolicerCir Unsigned32,
+ dQosAggPolicerCbs Unsigned32,
+ dQosAggPolicerSrtcmEbs Unsigned32,
+ dQosAggPolicerTrtcmPir Unsigned32,
+ dQosAggPolicerTrtcmPbs Unsigned32,
+ dQosAggPolicerConformAction DlinkQosPoliceActionType,
+ dQosAggPolicerConformReplaceDscp Unsigned32,
+ dQosAggPolicerExceedAction DlinkQosPoliceActionType,
+ dQosAggPolicerExceedReplaceDscp Unsigned32,
+ dQosAggPolicerViolateAction DlinkQosPoliceActionType,
+ dQosAggPolicerViolateReplaceDscp Unsigned32,
+ dQosAggPolicerColorAware TruthValue,
+ dQosAggPolicerRowStatus RowStatus,
+ dQosAggPolicerConformReplaceCos Unsigned32,
+ dQosAggPolicerExceedReplaceCos Unsigned32,
+ dQosAggPolicerViolateReplaceCos Unsigned32
+ }
+
+ dQosAggPolicerName OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(1..32))
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This object indicates the name of the aggregate policer."
+ ::= { dQosAggPolicerEntry 1 }
+
+ dQosAggPolicerType OBJECT-TYPE
+ SYNTAX INTEGER {
+ trTcm(1),
+ singleRate(2)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object indicates how meters a packet stream and marks its packets.
+ This object determines which other objects in the same row are meaningful.
+ trTcm - two rate three color marker;
+ singleRate - There are two kinds of single rate policers:
+ a. single rate three color (srTcm) - if the violate action is specified
+ b. single rate two color - if the violate action is not specified.
+ "
+ ::= { dQosAggPolicerEntry 2 }
+
+ dQosAggPolicerCir OBJECT-TYPE
+ SYNTAX Unsigned32 (0..10240000)
+ UNITS "kbps"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object is interpreted within the context of dQosAggPolicerType.
+ The measurement unit is in kilobits per second.
+ dQosAggPolicerType dQosAggPolicerCir
+ ================== ===============================================
+ 'trTcm' The committed information rate for first token
+ bucket.
+
+ 'singleRate' The rate-limit for two-color policier.
+ Or:
+ The committed information rate for srTcm.
+ "
+ ::= { dQosAggPolicerEntry 3 }
+
+ dQosAggPolicerCbs OBJECT-TYPE
+ SYNTAX Unsigned32 (0..16384)
+ UNITS "kbyte"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object is interpreted within the context of dQosAggPolicerType.
+
+ dQosAggPolicerType dQosAggPolicerCbs
+ ================== ===============================================
+ 'trTcm' The burst size for the first token bucket.
+
+ 'singleRate' The burst size for two-color policier.
+ Or:
+ The committed burst size for srTcm.
+ The measurement unit is in kilobytes.
+ The special value of 0 is used to indicate this object is not specified
+ and the default value will be used. What's the default value is project-dependent.
+ "
+ ::= { dQosAggPolicerEntry 4 }
+
+ dQosAggPolicerSrtcmEbs OBJECT-TYPE
+ SYNTAX Unsigned32 (0..16384)
+ UNITS "kbyte"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object indicates the excess burst size for srTcm and is
+ meaningless when dQosAggPolicerType is 'trTcm'.
+ The measurement unit is in kilobytes.
+ The special value of 0 is used to indicate this object is not specified
+ and the default value will be used. What's the default value is project-dependent.
+ "
+ ::= { dQosAggPolicerEntry 5 }
+
+ dQosAggPolicerTrtcmPir OBJECT-TYPE
+ SYNTAX Unsigned32 (0..10240000)
+ UNITS "kbps"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object indicates the peak information rate for the second
+ token bucket for the two-rate metering. This object is only
+ meaningful when dQosAggPolicerType is 'trTcm'.
+ The measurement unit is in kilobits per second.
+ The special value of 0 is used to indicate this object is not specified
+ and the default value will be used. What's the default value is project-dependent.
+ "
+ ::= { dQosAggPolicerEntry 6 }
+
+ dQosAggPolicerTrtcmPbs OBJECT-TYPE
+ SYNTAX Unsigned32 (0..16384)
+ UNITS "kbyte"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object indicates the burst size for the second token bucket.
+ This object is meaningful only when dQosAggPolicerType is 'trTcm'.
+ The measurement unit is in kilobytes.
+ The special value of 0 is used to indicate this object is not specified
+ and the default value will be used. What's the default value is project-dependent.
+ "
+ ::= { dQosAggPolicerEntry 7 }
+
+ dQosAggPolicerConformAction OBJECT-TYPE
+ SYNTAX DlinkQosPoliceActionType
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object indicates the action when the packet is in 'green color'.
+ "
+ ::= { dQosAggPolicerEntry 8 }
+
+ dQosAggPolicerConformReplaceDscp OBJECT-TYPE
+ SYNTAX Unsigned32 (0..63)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object indicates the new DSCP value of the packet when packet
+ is in 'green color'.
+ This object is meaningful only when dQosAggPolicerConformAction is 'replaceDscp' or 'replaceAll'.
+ "
+ ::= { dQosAggPolicerEntry 9 }
+
+ dQosAggPolicerExceedAction OBJECT-TYPE
+ SYNTAX DlinkQosPoliceActionType
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object is interpreted within the context of dQosAggPolicerType.
+
+ dQosAggPolicerType dQosAggPolExceedAction
+ ================== ===============================================
+ 'trTcm' The action to take for those packets that conform
+ to PIR but not to CIR.
+
+ 'singleRate' The action to take on the packets exceed the rate
+ limit (or committed burst size).
+ "
+ ::= { dQosAggPolicerEntry 10 }
+
+ dQosAggPolicerExceedReplaceDscp OBJECT-TYPE
+ SYNTAX Unsigned32 (0..63)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object indicates the new DSCP value when dQosAggPolExceedAction
+ is 'replaceDscp'or 'replaceAll'.
+ "
+ ::= { dQosAggPolicerEntry 11 }
+
+ dQosAggPolicerViolateAction OBJECT-TYPE
+ SYNTAX DlinkQosPoliceActionType
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object indicates the action state when the packet is in 'red color'.
+ "
+ ::= { dQosAggPolicerEntry 12 }
+
+ dQosAggPolicerViolateReplaceDscp OBJECT-TYPE
+ SYNTAX Unsigned32 (0..63)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object indicates the DSCP value of the packet when packet is in 'red color'.
+ This object is meaningful only when dQosAggPolicerViolateAction is 'replaceDscp' or 'replaceAll'.
+ "
+ ::= { dQosAggPolicerEntry 13 }
+
+ dQosAggPolicerColorAware OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object indicates whether the policer is color aware or not.
+ "
+ DEFVAL { false }
+ ::= { dQosAggPolicerEntry 14 }
+
+ dQosAggPolicerRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object indicates the status of this entry."
+ ::= { dQosAggPolicerEntry 24 }
+
+ dQosAggPolicerConformReplaceCos OBJECT-TYPE
+ SYNTAX Unsigned32 (0..7)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object indicates the new COS value of the packet when packet
+ is in 'green color'.
+ This object is meaningful only when dQosAggPolicerConformAction is 'replaceCos' or 'replaceAll'.
+ "
+ ::= { dQosAggPolicerEntry 15 }
+
+ dQosAggPolicerExceedReplaceCos OBJECT-TYPE
+ SYNTAX Unsigned32 (0..7)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object indicates the new COS value when dQosAggPolExceedAction
+ is 'replaceCos'or 'replaceAll'.
+ "
+ ::= { dQosAggPolicerEntry 16 }
+
+ dQosAggPolicerViolateReplaceCos OBJECT-TYPE
+ SYNTAX Unsigned32 (0..7)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object indicates the COS value of the packet when packet is in 'red color'.
+ This object is meaningful only when dQosAggPolicerViolateAction is 'replaceCos' or 'replaceAll'.
+ "
+ ::= { dQosAggPolicerEntry 17 }
+-- -----------------------------------------------------------------------------
+ dQosPoliceTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF DQosPoliceEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table is used to configure the metering function.
+ Users may set the preferred bandwidth for this rule; once the
+ bandwidth has been exceeded, overflow packets will be either dropped
+ or set for a drop precedence, depending on user configuration."
+ ::= { dQosPolicyMap 4 }
+
+ dQosPoliceEntry OBJECT-TYPE
+ SYNTAX DQosPoliceEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This entry consists of configurations for the metering policing
+ for a traffic class in a policy map."
+ INDEX {
+ dQosPolicyMapName,
+ dQosClassMapName
+ }
+ ::= { dQosPoliceTable 1 }
+
+ DQosPoliceEntry ::= SEQUENCE {
+ dQosPoliceType INTEGER,
+ dQosPoliceNamedAggPolicer DisplayString,
+ dQosPoliceCir Unsigned32,
+ dQosPoliceCbs Unsigned32,
+ dQosPoliceSrtcmEbs Unsigned32,
+ dQosPoliceTrtcmPir Unsigned32,
+ dQosPoliceTrtcmPbs Unsigned32,
+ dQosPoliceConformAction DlinkQosPoliceActionType,
+ dQosPoliceConformReplaceDscp Unsigned32,
+ dQosPoliceExceedAction DlinkQosPoliceActionType,
+ dQosPoliceExceedReplaceDscp Unsigned32,
+ dQosPoliceViolateAction DlinkQosPoliceActionType,
+ dQosPoliceViolateReplaceDscp Unsigned32,
+ dQosPoliceColorAware TruthValue,
+ dQosPoliceRowStatus RowStatus,
+ dQosPoliceConformReplaceCos Unsigned32,
+ dQosPoliceExceedReplaceCos Unsigned32,
+ dQosPoliceViolateReplaceCos Unsigned32
+ }
+
+ dQosPoliceType OBJECT-TYPE
+ SYNTAX INTEGER {
+ trTcm(1),
+ singleRate(2),
+ aggregate(3)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object indicates the type of policer used for a traffic class
+ in a policy map.
+ This object determines which other objects in the same row are meaningful.
+ trTcm - two rate three color marker;
+ singleRate - There are two kinds of single rate policers:
+ a. single rate three color (srTcm) - if the violate action is specified
+ b. single rate two color - if the violate action is not specified.
+ aggregate - uses a named aggregate policer as the policy. In this case,
+ except index elements, dQosAggPolicer, and dQosPoliceRowStatus, other
+ elements in the same row are not applicable.
+ "
+ ::= { dQosPoliceEntry 1 }
+
+ dQosPoliceNamedAggPolicer OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(1..32))
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object indicates the name of the aggregate policer to be applied.
+ This object is meaningful only when dQosPoliceType is 'aggregate'.
+ "
+ ::= { dQosPoliceEntry 2 }
+
+ dQosPoliceCir OBJECT-TYPE
+ SYNTAX Unsigned32 (0..10240000)
+ UNITS "kbps"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object is interpreted within the context of dQosPoliceType.
+ The measurement unit is in kilobits per second.
+ dQosPoliceType dQosPoliceCir
+ ================== ===============================================
+ 'trTcm' The committed information rate for first token
+ bucket.
+
+ 'singleRate' The rate-limit for two-color policier.
+ Or:
+ The committed information rate for srTcm.
+
+ 'aggregate' Not applicable
+ "
+ ::= { dQosPoliceEntry 3 }
+
+ dQosPoliceCbs OBJECT-TYPE
+ SYNTAX Unsigned32 (0..16384)
+ UNITS "kbyte"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object is interpreted within the context of dQosPoliceType.
+ dQosPoliceType dQosPoliceCbs
+ ================== ===============================================
+ 'trTcm' The burst size for the first token bucket.
+
+ 'singleRate' The burst size for two-color policier.
+ Or:
+ The committed burst size for srTcm.
+
+ 'aggregate' Not applicable
+ The measurement unit is in kilobytes.
+ The special value of 0 is used to indicate this object is not specified
+ and the default value will be used. What's the default value is project-dependent.
+ "
+ ::= { dQosPoliceEntry 4 }
+
+ dQosPoliceSrtcmEbs OBJECT-TYPE
+ SYNTAX Unsigned32 (0..16384)
+ UNITS "kbyte"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object indicates the excess burst size for srTcm and is
+ meaningless when dQosPoliceType is 'trTcm'.
+ The measurement unit is in kilobytes.
+ The special value of 0 is used to indicate this object is not specified
+ and the default value will be used. What's the default value is project-dependent.
+ "
+ ::= { dQosPoliceEntry 5 }
+
+ dQosPoliceTrtcmPir OBJECT-TYPE
+ SYNTAX Unsigned32 (0..10240000)
+ UNITS "kbps"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object indicates the peak information rate for the second
+ token bucket for the two-rate metering. This object is only
+ meaningful when dQosPoliceType is 'trTcm'.
+ The measurement unit is in kilobits per second.
+ The special value of 0 is used to indicate this object is not specified
+ and the default value will be used. What's the default value is project-dependent.
+ "
+ ::= { dQosPoliceEntry 6 }
+
+ dQosPoliceTrtcmPbs OBJECT-TYPE
+ SYNTAX Unsigned32 (0..16384)
+ UNITS "kbyte"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object indicates the burst size for the second token bucket.
+ This object is meaningful only when dQosPoliceType is 'trTcm'.
+ The measurement unit is in kilobytes.
+ The special value of 0 is used to indicate this object is not specified
+ and the default value will be used. What's the default value is project-dependent.
+ "
+ ::= { dQosPoliceEntry 7 }
+
+ dQosPoliceConformAction OBJECT-TYPE
+ SYNTAX DlinkQosPoliceActionType
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object indicates the action when the packet is in 'green color'.
+ "
+ ::= { dQosPoliceEntry 8 }
+
+ dQosPoliceConformReplaceDscp OBJECT-TYPE
+ SYNTAX Unsigned32 (0..63)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object indicates the new DSCP value for dQosPoliceConformAction
+ is 'replaceDscp' or 'replaceAll'."
+ ::= { dQosPoliceEntry 9 }
+
+ dQosPoliceExceedAction OBJECT-TYPE
+ SYNTAX DlinkQosPoliceActionType
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object is interpreted within the context of dQosPoliceType.
+
+ dQosPoliceType dQosPoliceExceedAction
+ ================== ===============================================
+ 'trTcm' The action to take for those packets that conform
+ to PIR but not to CIR.
+
+ 'singleRate' The action to take on the packets exceed the rate
+ limit (or committed burst size).
+ 'aggregate' Not applicable
+
+ "
+ ::= { dQosPoliceEntry 10 }
+
+ dQosPoliceExceedReplaceDscp OBJECT-TYPE
+ SYNTAX Unsigned32 (0..63)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object indicates the new DSCP value when dQosPoliceExceedAction
+ is 'replaceDscp' or 'replaceAll'.
+ "
+ ::= { dQosPoliceEntry 11 }
+
+ dQosPoliceViolateAction OBJECT-TYPE
+ SYNTAX DlinkQosPoliceActionType
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object indicates the action state when the packet is in 'red color'.
+ "
+ ::= { dQosPoliceEntry 12 }
+
+ dQosPoliceViolateReplaceDscp OBJECT-TYPE
+ SYNTAX Unsigned32 (0..63)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object indicates the new DSCP value when dQosPoliceViolateAction
+ is 'replaceDscp' or 'replaceAll'.
+ "
+ ::= { dQosPoliceEntry 13 }
+
+ dQosPoliceColorAware OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object indicates whether the policer is color aware or not.
+ This object is applied for dQosPoliceType is 'trTcm' or 'singleRate'.
+ "
+ ::= { dQosPoliceEntry 14 }
+
+ dQosPoliceRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object indicates the status of this entry."
+ ::= { dQosPoliceEntry 15 }
+
+ dQosPoliceConformReplaceCos OBJECT-TYPE
+ SYNTAX Unsigned32 (0..7)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object indicates the new COS value for dQosPoliceConformAction
+ is 'replaceCos' or 'replaceAll'.
+ "
+ ::= { dQosPoliceEntry 16 }
+
+ dQosPoliceExceedReplaceCos OBJECT-TYPE
+ SYNTAX Unsigned32 (0..7)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object indicates the new COS value when dQosPoliceExceedAction
+ is 'replaceCos' or 'replaceAll'.
+ "
+ ::= { dQosPoliceEntry 17 }
+
+ dQosPoliceViolateReplaceCos OBJECT-TYPE
+ SYNTAX Unsigned32 (0..7)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object indicates the new COS value when dQosPoliceViolateAction
+ is 'replaceCos' or 'replaceAll'.
+ "
+ ::= { dQosPoliceEntry 18 }
+-- ***************************************************************************
+-- Conformance
+-- ***************************************************************************
+ dQosCompliances OBJECT IDENTIFIER ::= { dQosMIBConformance 1 }
+
+ dQosCompliance MODULE-COMPLIANCE
+ STATUS current
+ DESCRIPTION
+ "The compliance statement for entities which implement the
+ DLINKSW-QOS-MIB."
+ MODULE -- this module
+ MANDATORY-GROUPS {
+ dQosPolicyGroup
+ }
+
+ GROUP dQosSchedulingGroup
+ DESCRIPTION
+ "This group is required only if QoS scheduling feature
+ is implemented by the agent."
+
+ GROUP dQosWrrGroup
+ DESCRIPTION
+ "This group is required only if the configuration for WRR scheduling
+ is supported by the agent."
+
+ GROUP dQosWdrrGroup
+ DESCRIPTION
+ "This group is required only if the configuration for WDRR scheduling
+ is supported by the agent."
+
+ GROUP dQosPortBandwidthCtrlGroup
+ DESCRIPTION
+ "This group is required only if port-specific bandwidth control feature is
+ implemented by the agent."
+
+ GROUP dQosQueueBandwidthCtrlGroup
+ DESCRIPTION
+ "This group is required only if queue-specific bandwidth control feature is
+ implemented by the agent."
+
+ GROUP dQosAggregatePolicingGroup
+ DESCRIPTION
+ "This group is required only if QoS aggregated policing feature is
+ implemented by the agent."
+
+ GROUP dQosPolicingGroup
+ DESCRIPTION
+ "This group is required only if QoS policing feature is implemented
+ by the agent."
+
+ OBJECT dQosPoliceType
+ DESCRIPTION
+ "It is compliant to support only a subset of policier types."
+
+ GROUP dQosColorAwarePolicingGroup
+ DESCRIPTION
+ "This group is required only if color aware configuration is implemented
+ by the agent."
+
+
+ GROUP dQosQueuingGroup
+ DESCRIPTION
+ "This group is required only if the configuration for queuing packets
+ is supported by the agent."
+
+ GROUP dQosDscpMutationGroup
+ DESCRIPTION
+ "This group is required only if the configuration for DSCP mutation
+ is supported by the agent."
+
+ ::= { dQosCompliances 1 }
+
+ dQosGroups OBJECT IDENTIFIER ::= { dQosMIBConformance 2 }
+
+ dQosPolicyGroup OBJECT-GROUP
+ OBJECTS {
+ dQosClassMapType,
+ dQosClassMapRowStaus,
+ dQosClassMapCfgMatchType,
+ dQosClassMapCfgMatchValue,
+ dQosClassMapCfgRowStaus,
+ dQosPolicyMapRowStatus,
+ dQosPolicyMapCfgSetCosQueue,
+ dQosPolicyMapCfgSetCos,
+ dQosPolicyMapCfgSetDscpOnlyIp,
+ dQosPolicyMapCfgSetDscp,
+ dQosPolicyMapCfgSetPreceOnlyIp,
+ dQosPolicyMapCfgSetPrecedence,
+ dQosPolicyMapCfgRowStatus,
+ dQosServicePolicyDirection,
+ dQosServicePolicyName,
+ dQosServicePolicyRowStaus
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects providing QoS policy configuration."
+ ::= { dQosGroups 1 }
+
+ dQosSchedulingGroup OBJECT-GROUP
+ OBJECTS {
+ dQosSchedulingMode
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects providing QoS scheduling configuration."
+ ::= { dQosGroups 2 }
+
+ dQosWrrGroup OBJECT-GROUP
+ OBJECTS {
+ dQosScheduleWrrWeightValue
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects providing QoS WRR scheduling configuration."
+ ::= { dQosGroups 3 }
+
+ dQosWdrrGroup OBJECT-GROUP
+ OBJECTS {
+ dQosScheduleWdrrWeightValue
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects providing QoS WDRR scheduling configuration."
+ ::= { dQosGroups 4 }
+
+ dQosPortBandwidthCtrlGroup OBJECT-GROUP
+ OBJECTS {
+ dQosBandwidthRxRate,
+ dQosBandwidthRxBurst,
+ dQosBandwidthTxRate,
+ dQosBandwidthTxBurst,
+ dQosBandwidthRxRateMode,
+ dQosBandwidthTxRateMode
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects providing bandwidth configuration for ports."
+ ::= { dQosGroups 5 }
+
+ dQosQueueBandwidthCtrlGroup OBJECT-GROUP
+ OBJECTS {
+ dQosQueueBandwidthMinRate,
+ dQosQueueBandwidthMaxRate,
+ dQosQueueBandwidthMinRateMode,
+ dQosQueueBandwidthMaxRateMode
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects providing bandwidth configuration for queues."
+ ::= { dQosGroups 6 }
+
+ dQosAggregatePolicingGroup OBJECT-GROUP
+ OBJECTS {
+ dQosAggPolicerType,
+ dQosAggPolicerCir,
+ dQosAggPolicerCbs,
+ dQosAggPolicerSrtcmEbs,
+ dQosAggPolicerTrtcmPir,
+ dQosAggPolicerTrtcmPbs,
+ dQosAggPolicerConformAction,
+ dQosAggPolicerConformReplaceDscp,
+ dQosAggPolicerExceedAction,
+ dQosAggPolicerExceedReplaceDscp,
+ dQosAggPolicerViolateAction,
+ dQosAggPolicerViolateReplaceDscp,
+ dQosAggPolicerColorAware,
+ dQosAggPolicerRowStatus,
+ dQosPoliceNamedAggPolicer,
+ dQosAggPolicerConformReplaceCos,
+ dQosAggPolicerExceedReplaceCos,
+ dQosAggPolicerViolateReplaceCos
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects providing QoS named aggregated policing configuration."
+ ::= { dQosGroups 7 }
+
+ dQosPolicingGroup OBJECT-GROUP
+ OBJECTS {
+ dQosPoliceType,
+ dQosPoliceCir,
+ dQosPoliceCbs,
+ dQosPoliceSrtcmEbs,
+ dQosPoliceTrtcmPir,
+ dQosPoliceTrtcmPbs,
+ dQosPoliceConformAction,
+ dQosPoliceConformReplaceDscp,
+ dQosPoliceExceedAction,
+ dQosPoliceExceedReplaceDscp,
+ dQosPoliceViolateAction,
+ dQosPoliceViolateReplaceDscp,
+ dQosPoliceRowStatus,
+ dQosDscpMapCtrlColor,
+ dQosPoliceConformReplaceCos,
+ dQosPoliceExceedReplaceCos,
+ dQosPoliceViolateReplaceCos
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects providing QoS policing configuration."
+ ::= { dQosGroups 8 }
+
+ dQosColorAwarePolicingGroup OBJECT-GROUP
+ OBJECTS {
+ dQosPoliceColorAware,
+ dQosDscpMapCtrlColor,
+ dQosCosMapColor
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects providing QoS color aware configuration."
+ ::= { dQosGroups 9 }
+
+
+ dQosQueuingGroup OBJECT-GROUP
+ OBJECTS {
+ dQosPortIf8021pOverride,
+ dQosPortIfTrustMode,
+ dQosDscpMapCtrlCos,
+ dQosCosToQueueQID
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects providing configuration regarding how to
+ dispatch packets to queues."
+ ::= { dQosGroups 10 }
+
+ dQosDscpMutationGroup OBJECT-GROUP
+ OBJECTS {
+ dQosDscpMutationMapRowStatus,
+ dQosDscpMutationNewDscp,
+ dQosDscpMutationMapAttachName
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects providing the configuration for DSCP mutation."
+ ::= { dQosGroups 11 }
+END
|