diff options
Diffstat (limited to 'MIBS/dlink/DLINKSW-PACKET-MONITOR-MIB')
| -rw-r--r-- | MIBS/dlink/DLINKSW-PACKET-MONITOR-MIB | 579 |
1 files changed, 579 insertions, 0 deletions
diff --git a/MIBS/dlink/DLINKSW-PACKET-MONITOR-MIB b/MIBS/dlink/DLINKSW-PACKET-MONITOR-MIB new file mode 100644 index 0000000..ef57169 --- /dev/null +++ b/MIBS/dlink/DLINKSW-PACKET-MONITOR-MIB @@ -0,0 +1,579 @@ +-- *****************************************************************
+-- DLINKSW-PACKET-MONITOR-MIB.mib : Packet Monitoring MIB
+--
+-- Copyright (c) 2013 D-Link Corporation, all rights reserved.
+--
+-- *****************************************************************
+DLINKSW-PACKET-MONITOR-MIB DEFINITIONS ::= BEGIN
+
+ IMPORTS
+ MODULE-IDENTITY,
+ OBJECT-TYPE,
+ Unsigned32,
+ Integer32
+ FROM SNMPv2-SMI
+ DisplayString, RowStatus
+ FROM SNMPv2-TC
+ MODULE-COMPLIANCE, OBJECT-GROUP
+ FROM SNMPv2-CONF
+ ifIndex, InterfaceIndexOrZero
+ FROM IF-MIB
+ VlanId
+ FROM Q-BRIDGE-MIB
+
+ dlinkIndustrialCommon
+ FROM DLINK-ID-REC-MIB;
+
+ dlinkSwPktMonitorMIB MODULE-IDENTITY
+ LAST-UPDATED "201407210000Z"
+ ORGANIZATION "D-Link Corp."
+ CONTACT-INFO
+ " D-Link Corporation
+
+ Postal: No. 289, Sinhu 3rd Rd., Neihu District,
+ Taipei City 114, Taiwan, R.O.C
+ Tel: +886-2-66000123
+ E-mail: tsd@dlink.com.tw
+ "
+ DESCRIPTION
+ "This MIB module defines objects for configuring Monitoring Traffic.
+ Acronyms and terminology:
+ SPAN (Switched Port Analyzer): Mirror network traffic for analysis
+ by a network analyzer.
+ Local-SPAN: The SPAN feature is local when the monitored ports are
+ all located on the same switch as the destination port.
+ RSPAN (Remote SPAN): Source ports and destination ports that are
+ distributed across multiple switches, allowing one to monitor
+ any destination port located on the RSPAN VLAN."
+
+ REVISION "201407210000Z"
+ DESCRIPTION
+ "Added the dPktMonSessionSrcTxIfStgState for dPktMonSessionSrcTxIfTable."
+
+ REVISION "201309270000Z"
+ DESCRIPTION
+ "Added the dPktMonSessionRowStatus for dPktMonSessionTable.
+ Modified the MAX-ACCESS(read-write to read-create) for
+ dPktMonSessionDestRemoteVlanId, dPktMonSessionSourceRemoteVlanId
+ and dPktMonSessionDestInterface in dPktMonSessionTable.
+ Added the dPktMonSessionDestRemoteReplaceVlanTable for supporting
+ egress per flow RSPAN VLAN replacement on a RSPAN source switch."
+
+ REVISION "201303040000Z"
+ DESCRIPTION
+ "This is the first version of the MIB file."
+
+ ::= { dlinkIndustrialCommon 12 }
+
+-- -----------------------------------------------------------------------------
+ dPktMonMIBNotifications OBJECT IDENTIFIER ::= { dlinkSwPktMonitorMIB 0 }
+ dPktMonMIBObjects OBJECT IDENTIFIER ::= { dlinkSwPktMonitorMIB 1 }
+ dPktMonMIBConformance OBJECT IDENTIFIER ::= { dlinkSwPktMonitorMIB 2 }
+
+-- -----------------------------------------------------------------------------
+-- Monitor Session Management
+-- -----------------------------------------------------------------------------
+ dPktMonSessionTableCurrEntries OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates the number of entries present in the dPktMonSessionTable."
+ ::= { dPktMonMIBObjects 1 }
+
+ dPktMonSessionTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF DPktMonSessionEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table to create a packet monitoring session, allowing
+ packets on source ports or VLAN to be monitored via a
+ destination port."
+ ::= { dPktMonMIBObjects 2 }
+
+ dPktMonSessionEntry OBJECT-TYPE
+ SYNTAX DPktMonSessionEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Each entry in the dPktMonSessionTable describes configuration
+ information about Packet Monitoring."
+ INDEX { dPktMonSessionID }
+ ::= { dPktMonSessionTable 1 }
+
+ DPktMonSessionEntry ::= SEQUENCE {
+ dPktMonSessionID Integer32,
+ dPktMonSessionSessionType INTEGER,
+ dPktMonSessionDestRemoteVlanId Integer32,
+ dPktMonSessionSourceRemoteVlanId Integer32,
+ dPktMonSessionDestInterface InterfaceIndexOrZero,
+ dPktMonSessionRowStatus RowStatus
+ }
+
+ dPktMonSessionID OBJECT-TYPE
+ SYNTAX Integer32 (1..80)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An index value that uniquely identifies the the packet
+ monitoring session associated with this information."
+ ::= { dPktMonSessionEntry 1 }
+
+ dPktMonSessionSessionType OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(0),
+ localSession(1),
+ remoteSourceSession(2),
+ remoteDestinationSession(3)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ " Indicates the session type of the entry.
+ none (0):
+ Indicates the entry is inactive.
+ localSession (1):
+ Indicates the entry is operating as Local-SPAN.
+ remoteSourceSession (2):
+ Indicates the entry is operating as an RSPAN source session, which
+ associates SPAN source ports or VLANs with a destination RSPAN VLAN.
+ remoteDestinationSession (3):
+ Indicates the entry is operating as an RSPAN destination session.
+ An RSPAN destination session associates an RSPAN VLAN with a
+ destination port."
+ ::= { dPktMonSessionEntry 2 }
+
+ dPktMonSessionDestRemoteVlanId OBJECT-TYPE
+ SYNTAX Integer32 (0 | 2..4094)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Indicates the RSPAN VLAN ID on the RSPAN source session.
+ This object should be considered in conjunction with the
+ dPktMonSessionDestInterface.
+ When this object is set with valid VLAN ID (2 to 4094), the mirrored
+ packets are transmitted with an RSPAN VLAN tag from the destination
+ port.
+ If this object is set to 0, the destination RSPAN VLAN becomes
+ unspecified, then the mirrored traffic will be transmitted without
+ additional RSPAN VLAN tag."
+ ::= { dPktMonSessionEntry 3 }
+
+ dPktMonSessionSourceRemoteVlanId OBJECT-TYPE
+ SYNTAX Integer32 (0 | 2..4094)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Set this object with valid VLAN ID (2 to 4094) for an RSPAN destination
+ session.
+ If this object is set to 0, the source RSPAN VLAN becomes
+ unspecified."
+ ::= { dPktMonSessionEntry 4 }
+
+ dPktMonSessionDestInterface OBJECT-TYPE
+ SYNTAX InterfaceIndexOrZero
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Indicates the destination interface of the packet monitoring
+ session. Both physical ports and port channel are valid as
+ destination interfaces of monitor sessions.
+ A value of zero indicates that no interface is associated with
+ this monitoring session."
+ ::= { dPktMonSessionEntry 5 }
+
+ dPktMonSessionRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The status of this conceptual row."
+ ::= { dPktMonSessionEntry 6 }
+
+-- -----------------------------------------------------------------------------
+ dPktMonSessionSrcIfObjects OBJECT-IDENTITY
+ STATUS current
+ DESCRIPTION
+ "This object identifier represents the objects that are configured
+ the source interfaces for monitor sessions."
+ ::= { dPktMonMIBObjects 3 }
+
+ dPktMonSessionSrcRxIfTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF DPktMonSessionSrcRxIfEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table consists of a list of source interface on which the packets
+ received for packet monitor sessions.
+ The first index element identifies the dPktMonSessionEntry that a
+ source interface (indicated by second index element) for monitoring
+ receiving packets (dPktMonSessionSrcRxIfEntry) belongs to. An entry
+ is removed from this table when its corresponding dPktMonSessionEntry
+ is deleted.
+ For a monitor session, to add or delete a source receiving interface
+ by creating or removing an entry in this table.
+ The valid interface includes: physical port/port channel/vlan and cpu.
+ "
+ ::= { dPktMonSessionSrcIfObjects 1 }
+
+ dPktMonSessionSrcRxIfEntry OBJECT-TYPE
+ SYNTAX DPktMonSessionSrcRxIfEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Each entry in the dPktMonSessionSrcRxIfTable describes
+ the source interface on which the packets received for a monitor session."
+ INDEX { dPktMonSessionID, ifIndex }
+ ::= { dPktMonSessionSrcRxIfTable 1 }
+
+ DPktMonSessionSrcRxIfEntry ::= SEQUENCE {
+ dPktMonSessionSrcRxIfRowStatus RowStatus
+ }
+
+ dPktMonSessionSrcRxIfRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The status of this conceptual row. Use this object to add/remove
+ an interface for a monitor session."
+ ::= { dPktMonSessionSrcRxIfEntry 1 }
+
+-- -----------------------------------------------------------------------------
+ dPktMonSessionSrcTxIfTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF DPktMonSessionSrcTxIfEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table consists of a list of source interface on which the packets
+ transmitted for packet monitor sessions.
+ The first index element identifies the dPktMonSessionEntry that a
+ source interface (indicated by second index element) for monitoring
+ transmitting packets (dPktMonSessionSrcTxIfEntry) belongs to. An entry
+ is removed from this table when its corresponding dPktMonSessionEntry is
+ deleted.
+ For a monitor session, to add or delete a source transmitting interface
+ by creating or removing an entry in this table.
+ "
+ ::= { dPktMonSessionSrcIfObjects 2 }
+
+ dPktMonSessionSrcTxIfEntry OBJECT-TYPE
+ SYNTAX DPktMonSessionSrcTxIfEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Each entry in the dPktMonSessionSrcTxIfTable describes
+ the source interface on which the packets transmitted for a monitor session."
+ INDEX { dPktMonSessionID, ifIndex }
+ ::= { dPktMonSessionSrcTxIfTable 1 }
+
+ DPktMonSessionSrcTxIfEntry ::= SEQUENCE {
+ dPktMonSessionSrcTxIfRowStatus RowStatus,
+ dPktMonSessionSrcTxIfStgState INTEGER
+ }
+
+ dPktMonSessionSrcTxIfRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The status of this conceptual row. Use this object to add/remove
+ an interface for a monitor session."
+ ::= { dPktMonSessionSrcTxIfEntry 1 }
+
+ dPktMonSessionSrcTxIfStgState OBJECT-TYPE
+ SYNTAX INTEGER {
+ no-care(1),
+ forwarding(2)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object indicates if the monitoring of the packets transmitted
+ on the interface will be affected by the interface's STG status.
+ 'no-care' - monitor the packets transmitted on the interface regardless
+ of the interface¡¯s STG status.
+ 'forwarding' - monitor the packets transmitted on the interface only when
+ the interface¡¯s all STGs status are forwarding."
+ DEFVAL { no-care }
+ ::= { dPktMonSessionSrcTxIfEntry 2 }
+
+-- -----------------------------------------------------------------------------
+ dPktMonSessionSrcDropIfTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF DPktMonSessionSrcDropIfEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table consists of a list of source interface to monitor the
+ packets which dropped on received port.
+ The first index element identifies the dPktMonSessionEntry that a
+ source interface (indicated by second index element) for monitoring
+ dropped packets (dPktMonSessionSrcDropIfTable) belongs to. An entry
+ is removed from this table when its corresponding dPktMonSessionEntry
+ is deleted.
+ For a monitor session, to add or delete a source interface
+ for monitoring dropped packets by creating or removing an entry in
+ this table.
+ "
+ ::= { dPktMonSessionSrcIfObjects 3 }
+
+ dPktMonSessionSrcDropIfEntry OBJECT-TYPE
+ SYNTAX DPktMonSessionSrcDropIfEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Each entry in the dPktMonSessionSrcDropIfTable describes
+ the source interface to monitor the packets which dropped on received port
+ for a monitor session."
+ INDEX { dPktMonSessionID, ifIndex }
+ ::= { dPktMonSessionSrcDropIfTable 1 }
+
+ DPktMonSessionSrcDropIfEntry ::= SEQUENCE {
+ dPktMonSessionSrcDropIfRowStatus RowStatus
+ }
+
+ dPktMonSessionSrcDropIfRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The status of this conceptual row. Use this object to add/remove
+ an interface for a port monitor session."
+ ::= { dPktMonSessionSrcDropIfEntry 1 }
+
+-- -----------------------------------------------------------------------------
+-- Configuring ACL for Monitor Session
+-- -----------------------------------------------------------------------------
+ dPktMonSessionSrcAclTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF DPktMonSessionSrcAclEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table containing associations between ACL and monitor session."
+ ::= { dPktMonMIBObjects 4 }
+
+ dPktMonSessionSrcAclEntry OBJECT-TYPE
+ SYNTAX DPktMonSessionSrcAclEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table entry representing an access list association to
+ a monitor session."
+ INDEX { dPktMonSessionID, dPktMonSessionSrcAclName }
+ ::= { dPktMonSessionSrcAclTable 1 }
+
+ DPktMonSessionSrcAclEntry ::= SEQUENCE {
+ dPktMonSessionSrcAclName DisplayString,
+ dPktMonSessionSrcAclRowStatus RowStatus
+ }
+ dPktMonSessionSrcAclName OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (1..32))
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Indicates the name of an access list for flow based monitoring.
+ Multiple access lists can be monitored on a session at a time. "
+ ::= {dPktMonSessionSrcAclEntry 1}
+
+ dPktMonSessionSrcAclRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The status of this conceptual row."
+ ::= { dPktMonSessionSrcAclEntry 2 }
+
+-- -----------------------------------------------------------------------------
+-- Configuring global RSPAN VLAN
+-- -----------------------------------------------------------------------------
+ dPktMonRspanVlanTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF DPktMonRspanVlanEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table containing RSPAN VLAN information on the
+ VLANs which currently configured as RSPAN VLAN."
+ ::= { dPktMonMIBObjects 5 }
+
+ dPktMonRspanVlanEntry OBJECT-TYPE
+ SYNTAX DPktMonRspanVlanEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Each entry in the dPktMonRspanVlanTable indicates
+ the VLAN is configured as RSPAN VLAN.
+ An entry is created/removed when RSPAN VLAN is enabled
+ or disabled at the VLAN via CLI or by issuing appropriate
+ sets to this table using snmp."
+ INDEX { dPktMonRspanVlanId }
+ ::= { dPktMonRspanVlanTable 1 }
+
+ DPktMonRspanVlanEntry ::= SEQUENCE {
+ dPktMonRspanVlanId VlanId,
+ dPktMonRspanVlanRowStatus RowStatus
+ }
+
+ dPktMonRspanVlanId OBJECT-TYPE
+ SYNTAX VlanId
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The VLAN number.
+ When a VLAN is specified as an RSPAN VLAN, the MAC address
+ learning on the RSPAN VLAN is disabled."
+ ::= { dPktMonRspanVlanEntry 1 }
+
+ dPktMonRspanVlanRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The status of this conceptual row."
+ ::= { dPktMonRspanVlanEntry 2 }
+
+-- -----------------------------------------------------------------------------
+-- Configuring Egress Replace RSPAN VLAN for Monitor Session
+-- -----------------------------------------------------------------------------
+ dPktMonSessionDestRemoteReplaceVlanTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF DPktMonSessionDestRemoteReplaceVlanEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table containing associations between replace RSPAN VLAN egress
+ per flow and monitor session.
+ For a RSPAN source session, multiple flows of VLAN replacement can
+ be configured."
+ ::= { dPktMonMIBObjects 6 }
+
+ dPktMonSessionDestRemoteReplaceVlanEntry OBJECT-TYPE
+ SYNTAX DPktMonSessionDestRemoteReplaceVlanEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table entry representing an access list and replace VLAN
+ association to a monitor session."
+ INDEX { dPktMonSessionID, dPktMonSessionDestRemoteAccessListName,dPktMonSessionDestRemoteReplaceVlanId }
+ ::= { dPktMonSessionDestRemoteReplaceVlanTable 1 }
+
+ DPktMonSessionDestRemoteReplaceVlanEntry ::= SEQUENCE {
+ dPktMonSessionDestRemoteAccessListName DisplayString,
+ dPktMonSessionDestRemoteReplaceVlanId VlanId,
+ dPktMonSessionDestRemoteReplaceVlanRowStatus RowStatus
+ }
+
+ dPktMonSessionDestRemoteAccessListName OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (1..32))
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Indicates the name of an access list for egress per flow RSPAN VLAN
+ replacement."
+ ::= {dPktMonSessionDestRemoteReplaceVlanEntry 1}
+
+ dPktMonSessionDestRemoteReplaceVlanId OBJECT-TYPE
+ SYNTAX VlanId
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Indicates the VLAN ID used to replace RSPAN VLAN ID for the matched
+ flow of packets transmitted out from the destination interface on a
+ RSPAN source switch."
+ ::= {dPktMonSessionDestRemoteReplaceVlanEntry 2}
+
+ dPktMonSessionDestRemoteReplaceVlanRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The status of this conceptual row."
+ ::= { dPktMonSessionDestRemoteReplaceVlanEntry 3 }
+
+-- -----------------------------------------------------------------------------
+-- MIB Conformance statements
+-- -----------------------------------------------------------------------------
+ dPktMonMIBCompliances OBJECT IDENTIFIER
+ ::= { dPktMonMIBConformance 1 }
+
+ dPktMonMIBGroups OBJECT IDENTIFIER
+ ::= { dPktMonMIBConformance 2 }
+
+ dPktMonMIBCompliance MODULE-COMPLIANCE
+ STATUS current
+ DESCRIPTION
+ "The compliance statement for entities which implement the
+ DLINKSW-PACKET-MONITOR-MIB."
+ MODULE -- this module
+ MANDATORY-GROUPS { dPktMonBasicGroup }
+
+ GROUP dPktMonRspanGroup
+ DESCRIPTION
+ "The group is required when the RSPAN is supported."
+
+ GROUP dPktMonFlowBasedMirrorGroup
+ DESCRIPTION
+ "The group is required when the flow based mirror is supported."
+
+ GROUP dPktMonMonitorDropPktGroup
+ DESCRIPTION
+ "The group is required when the monitoring dropped packets is supported."
+
+ GROUP dPktMonDestRemoteReplaceVlanGroup
+ DESCRIPTION
+ "The group is required when the egress per flow RSPAN VLAN replacement is supported."
+
+ ::= { dPktMonMIBCompliances 1 }
+
+ dPktMonBasicGroup OBJECT-GROUP
+ OBJECTS {
+ dPktMonSessionTableCurrEntries,
+ dPktMonSessionDestInterface,
+ dPktMonSessionRowStatus,
+ dPktMonSessionSrcRxIfRowStatus,
+ dPktMonSessionSrcTxIfRowStatus
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects providing basic packet monitoring
+ configuration."
+ ::= { dPktMonMIBGroups 1 }
+
+ dPktMonRspanGroup OBJECT-GROUP
+ OBJECTS {
+ dPktMonSessionSessionType,
+ dPktMonSessionDestRemoteVlanId,
+ dPktMonSessionSourceRemoteVlanId,
+ dPktMonRspanVlanRowStatus
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects providing RSPAN configuration."
+ ::= { dPktMonMIBGroups 2 }
+
+ dPktMonFlowBasedMirrorGroup OBJECT-GROUP
+ OBJECTS { dPktMonSessionSrcAclRowStatus }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects providing flow based mirroring
+ configuration."
+ ::= { dPktMonMIBGroups 3 }
+
+ dPktMonMonitorDropPktGroup OBJECT-GROUP
+ OBJECTS { dPktMonSessionSrcDropIfRowStatus }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects provides the configuration for monitoring
+ dropped packets on source interfaces.
+ "
+ ::= { dPktMonMIBGroups 4 }
+
+ dPktMonDestRemoteReplaceVlanGroup OBJECT-GROUP
+ OBJECTS { dPktMonSessionDestRemoteReplaceVlanRowStatus }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects provides the configuration for
+ performing egress per flow RSPAN VLAN replacement on a
+ RSPAN source switch."
+ ::= { dPktMonMIBGroups 5 }
+END
+
+
|