diff options
Diffstat (limited to 'MIBS/dlink/AGENT-GENERAL-MIB')
| -rw-r--r-- | MIBS/dlink/AGENT-GENERAL-MIB | 3549 |
1 files changed, 3549 insertions, 0 deletions
diff --git a/MIBS/dlink/AGENT-GENERAL-MIB b/MIBS/dlink/AGENT-GENERAL-MIB new file mode 100644 index 0000000..cc30fd9 --- /dev/null +++ b/MIBS/dlink/AGENT-GENERAL-MIB @@ -0,0 +1,3549 @@ +AGENT-GENERAL-MIB DEFINITIONS ::= BEGIN
+
+ IMPORTS
+ IpAddress, MODULE-IDENTITY,
+ OBJECT-TYPE,Integer32 FROM SNMPv2-SMI
+ TruthValue,RowStatus, MacAddress FROM SNMPv2-TC
+ DisplayString FROM RFC1213-MIB
+ InetAddressType, InetAddress FROM INET-ADDRESS-MIB
+ AgentNotifyLevel,dlink-common-mgmt FROM DLINK-ID-REC-MIB
+ VlanId FROM Q-BRIDGE-MIB;
+
+ agentGeneralMgmt MODULE-IDENTITY
+ LAST-UPDATED "201206260000Z"
+ ORGANIZATION "D-Link Corp."
+ CONTACT-INFO
+ "http://support.dlink.com"
+ DESCRIPTION
+ "The structure of general management information for enterprise."
+ ::= { dlink-common-mgmt 1 }
+
+-- -----------------------------------------------------------------------------
+-- Textual Conventions
+-- -----------------------------------------------------------------------------
+-- This definition may be excluded if IPv6 is not supported
+Ipv6Address ::= TEXTUAL-CONVENTION
+ DISPLAY-HINT "2x:"
+ STATUS current
+ DESCRIPTION
+ "This data type is used to model IPv6 addresses.
+ This is a binary string of 16 octets in network
+ byte-order."
+ SYNTAX OCTET STRING (SIZE (16))
+
+UnitList ::= OCTET STRING(SIZE (0..3))
+
+-- -----------------------------------------------------------------------------
+-- agentBasicInfo
+-- -----------------------------------------------------------------------------
+ agentBasicInfo OBJECT IDENTIFIER ::= { agentGeneralMgmt 1 }
+
+ agentMgmtProtocolCapability OBJECT-TYPE
+ SYNTAX INTEGER {
+ other(1),
+ snmp-ip(2),
+ snmp-ipx(3),
+ snmp-ip-ipx(4)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The network management protocol(s) supported by this agent."
+ ::= { agentBasicInfo 1 }
+
+-- -----------------------------------------------------------------------------
+-- agentMibcapabilityTable
+-- -----------------------------------------------------------------------------
+ agentMibCapabilityTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AgentMibCapabilityEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A list of MIB capability entries supported by this agent."
+ ::= { agentBasicInfo 2 }
+
+ agentMibCapabilityEntry OBJECT-TYPE
+ SYNTAX AgentMibCapabilityEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A MIB capability entry containing objects that describe a particular MIB
+ supported by this agent."
+ INDEX { agentMibCapabilityIndex }
+ ::= { agentMibCapabilityTable 1 }
+
+ AgentMibCapabilityEntry ::=
+ SEQUENCE {
+ agentMibCapabilityIndex
+ Integer32,
+ agentMibCapabilityDescr
+ DisplayString,
+ agentMibCapabilityVersion
+ Integer32,
+ agentMibCapabilityType
+ INTEGER
+ }
+
+ agentMibCapabilityIndex OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A list of Agent MIB Capability Description entries."
+ ::= { agentMibCapabilityEntry 1 }
+
+ agentMibCapabilityDescr OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..35))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The name of the MIB supported by the agent."
+ ::= { agentMibCapabilityEntry 2 }
+
+ agentMibCapabilityVersion OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The version of the MIB specified in this entry."
+ ::= { agentMibCapabilityEntry 3 }
+
+ agentMibCapabilityType OBJECT-TYPE
+ SYNTAX INTEGER {
+ other(1),
+ standard(2),
+ proprietary(3),
+ experiment(4)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The type of MIB specified in this entry."
+ ::= { agentMibCapabilityEntry 4 }
+
+
+ agentStatusConsoleInUse OBJECT-TYPE
+ SYNTAX INTEGER {
+ other(1),
+ in-use(2),
+ not-in-use(3)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This indicates whether the console is currently in use."
+ ::= { agentBasicInfo 3 }
+
+ agentStatusSaveCfg OBJECT-TYPE
+ SYNTAX INTEGER {
+ other(1),
+ proceeding(2),
+ completed(3),
+ failed(4)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This indicates the status of the device configuration.
+
+ other (1) - This entry is currently in use but the conditions under
+ which it will remain so are determined by each of the following values.
+ proceeding (2) - The device configuration is currently being saved into NV-RAM.
+ completed (3) - All of the device configuration parameters have been
+ saved into NV-RAM.
+ failed (4) - The process to save the device configuration has failed."
+ ::= { agentBasicInfo 4 }
+
+ agentStatusFileTransfer OBJECT-TYPE
+ SYNTAX INTEGER {
+ other(1) ,
+ in-process(2),
+ invalid-file(3),
+ violation(4),
+ file-not-found(5),
+ disk-full(6),
+ complete(7),
+ time-out(8),
+ not-format(9),
+ memory-full(10)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The status of the firmware download control. If the value is stated as 'other',
+ the firmware has not been updated since the device was started."
+ ::= { agentBasicInfo 5 }
+
+-- -----------------------------------------------------------------------------
+-- agentCPUutilizationTable
+-- -----------------------------------------------------------------------------
+ agentCPUutilization OBJECT IDENTIFIER ::= { agentBasicInfo 6 }
+
+ agentCPUutilizationIn5sec OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The time scale is set at 5 second intervals.
+ The value will be between 0% (idle) and 100% (very busy)."
+ ::= { agentCPUutilization 1 }
+
+ agentCPUutilizationIn1min OBJECT-TYPE
+ SYNTAX Integer32
+
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The time scale is set at 1 minute intervals.
+ The value will be between 0% (idle) and 100% (very busy)."
+ ::= { agentCPUutilization 2 }
+
+ agentCPUutilizationIn5min OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The time scale is set at 5 minute intervals.
+ The value will be between 0% (idle) and 100% (very busy)."
+ ::= { agentCPUutilization 3 }
+
+ agentDualImageStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ not-supported(0),
+ supported(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The dual image status."
+ ::= { agentBasicInfo 7 }
+
+-- -----------------------------------------------------------------------------
+-- agentPORTutilizationTable
+-- -----------------------------------------------------------------------------
+ agentPORTutilizationTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AgentPORTutilizationEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table specifies the current utilization of a specified port."
+ ::= { agentBasicInfo 8 }
+
+ agentPORTutilizationEntry OBJECT-TYPE
+ SYNTAX AgentPORTutilizationEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A list of information regarding the port utilization function."
+ INDEX { agentPORTutilizationProtIndex }
+ ::= { agentPORTutilizationTable 1 }
+
+ AgentPORTutilizationEntry ::=
+ SEQUENCE {
+ agentPORTutilizationProtIndex
+ INTEGER,
+ agentPORTutilizationTX
+ INTEGER,
+ agentPORTutilizationRX
+ INTEGER,
+ agentPORTutilizationUtil
+ INTEGER,
+ agentPORTutilizationRXUtil
+ INTEGER,
+ agentPORTutilizationTXUtil
+ INTEGER
+ }
+
+ agentPORTutilizationProtIndex OBJECT-TYPE
+ SYNTAX INTEGER (1..65535)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object indicates the module's port number."
+ ::= { agentPORTutilizationEntry 1 }
+
+ agentPORTutilizationTX OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The current rate of transmitted frames on the specified port."
+ ::= { agentPORTutilizationEntry 2 }
+
+ agentPORTutilizationRX OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The current rate of received frames on the specified port."
+ ::= { agentPORTutilizationEntry 3 }
+
+ agentPORTutilizationUtil OBJECT-TYPE
+ SYNTAX INTEGER (0..100)
+ UNITS "%"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The current percentages regarding port statistics."
+ ::= { agentPORTutilizationEntry 4 }
+
+ agentPORTutilizationRXUtil OBJECT-TYPE
+ SYNTAX INTEGER (0..100)
+ UNITS "%"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The current percentages regarding port receive packets statistics."
+ ::= { agentPORTutilizationEntry 5 }
+
+ agentPORTutilizationTXUtil OBJECT-TYPE
+ SYNTAX INTEGER (0..100)
+ UNITS "%"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The current percentages regarding port transmit packets statistics."
+ ::= { agentPORTutilizationEntry 6 }
+-- -----------------------------------------------------------------------------
+ agentDRAMutilizationTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AgentDRAMutilizationEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Information about DRAM memory."
+ ::={agentBasicInfo 9}
+
+ agentDRAMutilizationEntry OBJECT-TYPE
+ SYNTAX AgentDRAMutilizationEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A list of information about DRAM memory."
+ INDEX {agentDRAMutilizationUnitID}
+ ::={agentDRAMutilizationTable 1}
+
+ AgentDRAMutilizationEntry ::=
+ SEQUENCE {
+ agentDRAMutilizationUnitID
+ INTEGER,
+ agentDRAMutilizationTotalDRAM
+ INTEGER,
+ agentDRAMutilizationUsedDRAM
+ INTEGER,
+ agentDRAMutilization
+ INTEGER
+ }
+
+ agentDRAMutilizationUnitID OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Specifies the unit ID.
+ If the ID equals zero, it means the current device."
+ ::={ agentDRAMutilizationEntry 1 }
+
+ agentDRAMutilizationTotalDRAM OBJECT-TYPE
+ SYNTAX INTEGER
+ UNITS "KB"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The size of total DRAM memory."
+ ::={agentDRAMutilizationEntry 2}
+
+ agentDRAMutilizationUsedDRAM OBJECT-TYPE
+ SYNTAX INTEGER
+ UNITS "KB"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The size of used DRAM memory."
+ ::={agentDRAMutilizationEntry 3}
+
+ agentDRAMutilization OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The percentage of used DRAM memory of the total DRAM memory available.
+ The value will be between 0% (idle) and 100% (very busy)."
+ ::={agentDRAMutilizationEntry 4}
+
+-- -----------------------------------------------------------------------------
+ agentFLASHutilizationTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AgentFLASHutilizationEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Information about the flash memory."
+ ::={agentBasicInfo 10}
+
+ agentFLASHutilizationEntry OBJECT-TYPE
+ SYNTAX AgentFLASHutilizationEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Information about the flash memory."
+ INDEX {agentFLASHutilizationUnitID}
+ ::={agentFLASHutilizationTable 1}
+
+ AgentFLASHutilizationEntry ::=
+ SEQUENCE {
+ agentFLASHutilizationUnitID
+ INTEGER,
+ agentFLASHutilizationTotalFLASH
+ INTEGER,
+ agentFLASHutilizationUsedFLASH
+ INTEGER,
+ agentFLASHutilization
+ INTEGER
+ }
+
+ agentFLASHutilizationUnitID OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Specifies the unit ID.
+ If the ID equals zero, it means the current device."
+ ::={ agentFLASHutilizationEntry 1 }
+
+ agentFLASHutilizationTotalFLASH OBJECT-TYPE
+ SYNTAX INTEGER
+ UNITS "KB"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total size of flash memory."
+ ::={agentFLASHutilizationEntry 2}
+
+ agentFLASHutilizationUsedFLASH OBJECT-TYPE
+ SYNTAX INTEGER
+ UNITS "KB"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The size of the used flash memory."
+ ::={agentFLASHutilizationEntry 3}
+
+ agentFLASHutilization OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The percentage of used flash memory in total flash memory.
+ The value will be between 0% (idle) and 100% (very busy)."
+ ::={agentFLASHutilizationEntry 4}
+
+-- -----------------------------------------------------------------------------
+ agentStatusReset OBJECT-TYPE
+ SYNTAX INTEGER {
+ proceeding(1),
+ completed(2),
+ failed(3)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This indicates the status of 'agentReset'."
+ ::= { agentBasicInfo 11 }
+
+ agentSerialNumber OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A text string containing the serial number of this device."
+ ::= { agentBasicInfo 12 }
+
+-- -----------------------------------------------------------------------------
+ agentFirmwareType OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A text string containing the firmware type."
+ ::= { agentBasicInfo 13 }
+
+-- -----------------------------------------------------------------------------
+-- agentBasicConfig
+-- -----------------------------------------------------------------------------
+ agentBasicConfig OBJECT IDENTIFIER ::= { agentGeneralMgmt 2 }
+
+ agentBscSwFileTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AgentBscSwFileEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A list of MIB Basic Config entry support files updated by this agent."
+ ::= { agentBasicConfig 1 }
+
+ agentBscSwFileEntry OBJECT-TYPE
+ SYNTAX AgentBscSwFileEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A basic configuration entry containing the objects that describe a particular MIB
+ supported by this agent."
+ INDEX { agentBscSwFileIndex }
+ ::= { agentBscSwFileTable 1 }
+
+ AgentBscSwFileEntry ::=
+ SEQUENCE {
+ agentBscSwFileIndex
+ Integer32,
+ agentBscSwFileDscr
+ DisplayString,
+ agentBscSwFileAddr
+ IpAddress,
+ agentBscSwFileTransferType
+ INTEGER,
+ agentBscSwFile
+ DisplayString,
+ agentBscSwFileLocateId
+ INTEGER,
+ agentBscSwFileLoadType
+ INTEGER,
+ agentBscSwFileCtrl
+ INTEGER,
+ agentBscSwFileBIncrement
+ TruthValue,
+ agentBscSwFileCtrlID
+ INTEGER,
+ agentBscSwFileCtrlUnitID
+ UnitList,
+ agentBscSwFileIPv6Addr
+ Ipv6Address,
+ agentBscSwFileBootUpImage
+ TruthValue,
+ agentBscSwFileForceAgree
+ TruthValue,
+ agentBscSwFileInterfaceName
+ DisplayString,
+ agentBscSwFileServerDomainName
+ DisplayString
+ }
+
+ agentBscSwFileIndex OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The table index for the file entry"
+ ::= { agentBscSwFileEntry 1 }
+
+ agentBscSwFileDscr OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..64))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The description of the software file purpose in this entry.
+ Note: For systems that do not support a change to this object, setting a value for
+ this object will cause the system to return bad-value error messages."
+ ::= { agentBscSwFileEntry 2 }
+
+ agentBscSwFileAddr OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The IP address where the file that needs to be downloaded is located, or the IP address
+ where the file will be uploaded to."
+ ::= { agentBscSwFileEntry 3 }
+
+ agentBscSwFileTransferType OBJECT-TYPE
+ SYNTAX INTEGER {
+ other(1),
+ network-load(2),
+ out-of-band-load(3)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The channel through which the file will be downloaded or uploaded.
+ Note: For systems that do not support all channels, setting a value to the unsupported
+ channel will cause the system to return bad-value error messages."
+ ::= { agentBscSwFileEntry 4 }
+
+ agentBscSwFile OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..128))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The name of the file to be downloaded from, or uploaded to, the TFTP server."
+ ::= { agentBscSwFileEntry 5 }
+
+ agentBscSwFileLocateId OBJECT-TYPE
+ SYNTAX INTEGER (1..16)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object describes the type of file.
+ runtime-code (1),
+ log-file (2),
+ cfg-file (3)
+ Note: For systems that do not support changes to this object, setting a value for
+ this object will cause the system to return bad-value error messages."
+ ::= { agentBscSwFileEntry 6 }
+
+ agentBscSwFileLoadType OBJECT-TYPE
+ SYNTAX INTEGER {
+ other(1),
+ upload(2),
+ download(3)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object provides the user with a choice of uploading or downloading the selected file.
+ Note: For systems that do not support a change to this object, setting a value for this object
+ will cause the system to return bad-value error messages."
+ ::= { agentBscSwFileEntry 7 }
+
+ agentBscSwFileCtrl OBJECT-TYPE
+ SYNTAX INTEGER {
+ other(1),
+ inactive(2),
+ start(3),
+ delete(4),
+ config-as-bootup(5),
+ apply(6)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object gives the user the option of downloading runtime software. This setting will take effect
+ when the system restarts. See Note (1) below
+
+ Note:
+ For systems that do not support changes to this object, setting a value to this object
+ will cause the system to return bad-value error messages.
+
+ start - Activate firmware.
+ delete (4) - Delete the firmware by indicated firmware ID.
+ config-as-bootup (5) - Configured as bootup firmware by the indicated
+ firmware(ID).
+ apply (6) - Apply the configuration to be the active configuration by the indicated config ID."
+ ::= { agentBscSwFileEntry 8 }
+
+ agentBscSwFileBIncrement OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object indicates whether the previous configuration will remain
+ valid or not after downloading the configuration file.
+ True: Keep valid
+ False: Erase. "
+ ::= { agentBscSwFileEntry 9 }
+
+ agentBscSwFileCtrlID OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The section ID of the firmware image or configuration file.
+ A value of 0 indicates the boot-up firmware image or configuration file."
+ ::= { agentBscSwFileEntry 10 }
+
+ agentBscSwFileCtrlUnitID OBJECT-TYPE
+ SYNTAX UnitList
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Specifies which unit of the switch stack the firmware image will be downloaded from.
+ One or more units can be set in this list. Each bit from the left to the right represents the
+ switch from unit ID 1 to unit ID 12.
+ A null entry in this field denotes all switches in the switch stack."
+ ::= { agentBscSwFileEntry 11 }
+
+ agentBscSwFileIPv6Addr OBJECT-TYPE
+ SYNTAX Ipv6Address
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The IPv6 address where the file will be downloaded from or uploaded to."
+ ::= { agentBscSwFileEntry 12 }
+
+ agentBscSwFileBootUpImage OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The result of the download will depend on whether the boot_up option is specified.
+ Case 1: In the case where the master unit provides the file system and the slave unit does
+ not provide the file system, when boot_up is specified, the file will be downloaded
+ to the boot_up image on the slave. If boot_up is not specified, then the file will
+ not be downloaded to this slave unit.
+
+ Case 2: In the case where the master unit does not provide the file system and the slave unit
+ provides the file system, when boot_up is specified, the file will be downloaded to
+ the boot_up image on the slave unit. If boot_up is not specified, the file will
+ not be downloaded to this slave unit.
+
+ Case 3: In the case where the master unit and the slave unit both support or do not support
+ the file system, the file will be downloaded to the specified file on the slave unit.
+ If boot_up is specified, the downloaded file will be assigned as the boot_up image.
+
+ True: boot_up option is specified.
+ False: boot_up option is not specified. "
+ ::= { agentBscSwFileEntry 13 }
+
+ agentBscSwFileForceAgree OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "When the force_agree option is specified, the reboot command will be executed
+ immediately, without any further confirmation from the user.
+
+ True: force_agree option is specified.
+ False: force_agree option is not specified. "
+ ::= { agentBscSwFileEntry 14 }
+
+ agentBscSwFileInterfaceName OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..12))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This node is used to specify the interface name when the agentBscSwFileIPv6Addr
+ is the link local address."
+ ::= { agentBscSwFileEntry 15 }
+
+ agentBscSwFileServerDomainName OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..255))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object indicates the domain name of the TFTP server."
+ ::= { agentBscSwFileEntry 16 }
+
+ agentFileTransfer OBJECT-TYPE
+ SYNTAX INTEGER {
+ other(1),
+ start(2),
+ start-and-reset(3),
+ noaction(4)
+ }
+ MAX-ACCESS read-write
+ STATUS obsolete
+ DESCRIPTION
+ "This object will execute the download or upload action. If start (2) is chosen, it will
+ begin to download/upload and no reset will follow. If start-and-reset (3) is chosen,
+ then the reset will be activated after completing the download or upload.
+ No action if noaction (4) is chosen.
+
+ Note:
+ Because these functions will be limited by the support for the system in question,
+ some of the selected items will be invalid. When the user selects an invalid entry,
+ the system will respond with a bad-value status."
+ ::= { agentBasicConfig 2 }
+
+ agentSystemReset OBJECT-TYPE
+ SYNTAX INTEGER {
+ other(1),
+ cold-start(2),
+ warm-start(3),
+ no-reset(4)
+ }
+ MAX-ACCESS read-write
+ STATUS deprecated
+ DESCRIPTION
+ "This object indicates the agent system reset state. Setting this
+ object to no-reset (4) has no effect. Setting this object to
+ cold-start (2) or warm-start (3) will reset the agent. The agent
+ always returns to no-reset (4) when this object is read.
+
+ This object is replaced by 'agentReset'."
+ ::= { agentBasicConfig 3 }
+
+ agentRs232PortConfig OBJECT-TYPE
+ SYNTAX INTEGER {
+ other(1),
+ console(2),
+ out-of-band(3),
+ notAvail(4)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object indicates the RS-232C mode once the device has restarted."
+ ::= { agentBasicConfig 4 }
+
+ agentOutOfBandBaudRateConfig OBJECT-TYPE
+ SYNTAX INTEGER {
+ other(1),
+ baudRate-2400 (2),
+ baudRate-9600 (3),
+ baudRate-19200(4),
+ baudRate-38400(5),
+ baudRate-115200(6)
+ }
+ MAX-ACCESS read-write
+ STATUS obsolete
+ DESCRIPTION
+ "This object allows the user to specify an out-of-band baud rate, which
+ will take effect upon system restart.
+
+ Note:
+ Because these functions will be limited by the support for the system
+ in question, some of the selected items will be invalid. When the user
+ selects an invalid entry, the system will respond with a bad-value error message.
+ "
+ ::= { agentBasicConfig 5 }
+
+
+
+ agentSaveCfg OBJECT-TYPE
+ SYNTAX INTEGER {
+ other(1),
+ cfg-id1(2),
+ cfg-id2(3),
+ log(4),
+ all(5)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object indicates the type of save command to be executed, when saving to NV-RAM.
+ other (1) - None of the following.
+ cfg-id1 (2) - Save configuration ID1.
+ cfg-id2 (3)- Save configuration ID2.
+ log (4) - Save log.
+ all (5) - Save both (active configuration and log)."
+ ::= { agentBasicConfig 6 }
+
+
+-- -----------------------------------------------------------------------------
+-- swMultiImageInfoTable
+-- -----------------------------------------------------------------------------
+ swMultiImageInfoTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF SwMultiImageInfoEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ ""
+ ::= { agentBasicConfig 7 }
+
+ swMultiImageInfoEntry OBJECT-TYPE
+ SYNTAX SwMultiImageInfoEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A list of information about multiple image management."
+ INDEX { swMultiImageInfoID }
+ ::= { swMultiImageInfoTable 1 }
+
+ SwMultiImageInfoEntry ::=
+ SEQUENCE {
+ swMultiImageInfoID
+ INTEGER,
+ swMultiImageVersion
+ DisplayString,
+ swMultiImageSize
+ Integer32,
+ swMultiImageUpdateTime
+ DisplayString,
+ swMultiImageFrom
+ DisplayString,
+ swMultiImageSendUser
+ DisplayString,
+ swMultiImageFileName
+ DisplayString
+ }
+ swMultiImageInfoID OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The stacking section ID of the firmware image.
+ The stacking section ID = 256 * Unit ID + Image File ID."
+ ::= { swMultiImageInfoEntry 1 }
+
+ swMultiImageVersion OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..32))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The recorded downloaded firmware version."
+ ::= { swMultiImageInfoEntry 2 }
+
+ swMultiImageSize OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The recorded downloaded firmware size."
+ ::= { swMultiImageInfoEntry 3 }
+
+ swMultiImageUpdateTime OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..32))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The recorded firmware update time."
+ ::= { swMultiImageInfoEntry 4 }
+
+ swMultiImageFrom OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..100))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The recorded IP address of the TFTP server"
+ ::= { swMultiImageInfoEntry 5 }
+
+ swMultiImageSendUser OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..32))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The record of the user who downloaded the firmware."
+ ::= { swMultiImageInfoEntry 6 }
+
+ swMultiImageFileName OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..255))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "When the system is set to boot from SD card, this object will display the recorded path name of the boot firmware file. "
+ ::= { swMultiImageInfoEntry 7 }
+
+-- -----------------------------------------------------------------------------
+ agentMultiCfgMgmt OBJECT IDENTIFIER ::= { agentBasicConfig 8 }
+
+ swMultiCfgInfoTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF SwMultiCfgInfoEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ ""
+ ::= { agentMultiCfgMgmt 1 }
+
+ swMultiCfgInfoEntry OBJECT-TYPE
+ SYNTAX SwMultiCfgInfoEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A list of information about multiple configuration files."
+ INDEX { swMultiCfgInfoID }
+ ::= { swMultiCfgInfoTable 1 }
+
+ SwMultiCfgInfoEntry ::=
+ SEQUENCE {
+ swMultiCfgInfoID
+ INTEGER,
+ swMultiCfgVersion
+ DisplayString,
+ swMultiCfgSize
+ Integer32,
+ swMultiCFgUpdateTime
+ DisplayString,
+ swMultiCfgFrom
+ DisplayString,
+ swMultiCfgSendUser
+ DisplayString,
+ swMultiCfgFileName
+ DisplayString
+ }
+ swMultiCfgInfoID OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The section ID of the configuration files."
+ ::= { swMultiCfgInfoEntry 1 }
+
+ swMultiCfgVersion OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..32))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The recorded downloaded configuration version."
+ ::= { swMultiCfgInfoEntry 2 }
+
+ swMultiCfgSize OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The recorded downloaded configuration size (in bytes).
+ "
+ ::= { swMultiCfgInfoEntry 3 }
+
+ swMultiCFgUpdateTime OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..32))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The recorded configuration update time
+ displayed in string format, i.e. yyyy/mon/dd hh:mm:ss."
+ ::= { swMultiCfgInfoEntry 4 }
+
+ swMultiCfgFrom OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..100))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The recorded IP address of the TFTP server."
+ ::= { swMultiCfgInfoEntry 5 }
+
+ swMultiCfgSendUser OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..32))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The record of the user who downloaded the configuration file"
+ ::= { swMultiCfgInfoEntry 6 }
+
+ swMultiCfgFileName OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..255))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "When the system is set to boot from SD card, this object displays the recorded path name of the boot configuration file. "
+ ::= { swMultiCfgInfoEntry 7 }
+
+-- -----------------------------------------------------------------------------
+ swMultiCfgCurrentUsed OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The indicated configuration file ID of the system currently in use."
+ ::= { agentMultiCfgMgmt 2 }
+
+ swMultiCfgBootUp OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object indicates the configuration file ID which will take effect upon the next reboot."
+ ::= { agentMultiCfgMgmt 3 }
+
+
+
+-- -----------------------------------------------------------------------------
+-- swMultiCfgCtrlTable
+-- -----------------------------------------------------------------------------
+ swMultiCfgCtrlTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF SwMultiCfgCtrlEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ ""
+ ::= { agentMultiCfgMgmt 4 }
+
+ swMultiCfgCtrlEntry OBJECT-TYPE
+ SYNTAX SwMultiCfgCtrlEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A list of information about multiple configuration management."
+ INDEX { swMultiCfgCtrlID }
+ ::= { swMultiCfgCtrlTable 1 }
+
+ SwMultiCfgCtrlEntry ::=
+ SEQUENCE {
+ swMultiCfgCtrlID
+ INTEGER,
+ swMultiCfgAction
+ INTEGER
+ }
+ swMultiCfgCtrlID OBJECT-TYPE
+ SYNTAX INTEGER{
+ cfgId-1(1),
+ cfgId-2(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The section ID of the configuration file."
+ ::= { swMultiCfgCtrlEntry 1 }
+
+ swMultiCfgAction OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ active(1),
+ delete(2),
+ apply(3),
+ none(4),
+ config-as-bootup-cfg(5)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "
+ save: Save configuration to active configuration ID when the parameter is omitted.
+ active: Set any valid configuration as the active configuration.
+ delete: Removes the configuration from the flash memory. This configuration
+ cannot be the active or current configuration file.
+ apply: Loads the indicated configuration file and applies it to the system.
+ config-as-bootup-cfg: Configured as the boot-up configuration by the indicated configuration(ID)."
+ ::= { swMultiCfgCtrlEntry 2 }
+
+-- -----------------------------------------------------------------------------
+-- Add common severity control management
+-- -----------------------------------------------------------------------------
+ systemSeverityControlMgmt OBJECT IDENTIFIER ::= { agentBasicConfig 9 }
+
+ systemSeverityTrapControl OBJECT-TYPE
+ SYNTAX AgentNotifyLevel
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Indicates the level of trap severity control. The system has a severity level control
+ and each trap should have a severity control set. When trap events occur and its severity
+ is higher than the system severity control level, the trap works as defined. If the event
+ severity is lower than the system severity control level, the event is ignored as if it
+ did not occur."
+ ::= { systemSeverityControlMgmt 1 }
+
+ systemSeverityLogControl OBJECT-TYPE
+ SYNTAX AgentNotifyLevel
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Indicates the level of trap severity control. The system has a severity level control and
+ each trap should have a severity control set. When trap events occur and its severity is
+ higher than the system severity control level, the trap works as defined. If the event
+ severity is lower than the system severity control level, the event is ignored as if
+ it did not occur."
+ ::= { systemSeverityControlMgmt 2 }
+
+-- -----------------------------------------------------------------------------
+-- agentTrustedHostMgmt
+-- -----------------------------------------------------------------------------
+ agentTrustedHostMgmt OBJECT IDENTIFIER ::= { agentBasicConfig 10 }
+
+ agentTrustedHostTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AgentTrustedHostEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table contains the trusted host information."
+ ::= { agentTrustedHostMgmt 1 }
+
+ agentTrustedHostEntry OBJECT-TYPE
+ SYNTAX AgentTrustedHostEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A list of information about the trusted hosts."
+ INDEX { agentTrustedHostIndex }
+ ::= { agentTrustedHostTable 1 }
+
+ AgentTrustedHostEntry ::=
+ SEQUENCE {
+ agentTrustedHostIndex
+ INTEGER,
+ agentTrustedHostIPAddress
+ IpAddress,
+ agentTrustedHostRowStatus
+ RowStatus,
+ agentTrustedHostIPSubnetMask
+ IpAddress,
+ agentTrustedHostForSNMP
+ INTEGER,
+ agentTrustedHostForTELNET
+ INTEGER,
+ agentTrustedHostForSSH
+ INTEGER,
+ agentTrustedHostForHTTP
+ INTEGER,
+ agentTrustedHostForHTTPS
+ INTEGER,
+ agentTrustedHostForPING
+ INTEGER,
+ agentTrustedHostAddrType
+ InetAddressType,
+ agentTrustedHostAddr
+ InetAddress,
+ agentTrustedHostIPv6PrefixLen
+ INTEGER
+ }
+
+ agentTrustedHostIndex OBJECT-TYPE
+ SYNTAX INTEGER (1..30)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The index of the trusted host entry."
+ ::= { agentTrustedHostEntry 1 }
+
+ agentTrustedHostIPAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Specifies the IP address of the trusted host."
+ ::= { agentTrustedHostEntry 2 }
+
+ agentTrustedHostRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Indicates the status of this entry. When creating a trusted host
+ entry, the IP address should also be set."
+ ::= { agentTrustedHostEntry 3 }
+
+ agentTrustedHostIPSubnetMask OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Specifies the IP subnet mask of the trusted host."
+ ::= { agentTrustedHostEntry 4 }
+
+ agentTrustedHostForSNMP OBJECT-TYPE
+ SYNTAX INTEGER {
+ enabled(1),
+ disabled(2)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Specifies the trusted host for SNMP."
+ ::= { agentTrustedHostEntry 5 }
+
+ agentTrustedHostForTELNET OBJECT-TYPE
+ SYNTAX INTEGER {
+ enabled(1),
+ disabled(2)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Specifies the trusted host for Telnet."
+ ::= { agentTrustedHostEntry 6 }
+
+ agentTrustedHostForSSH OBJECT-TYPE
+ SYNTAX INTEGER {
+ enabled(1),
+ disabled(2)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Specifies the trusted host for SSH."
+ ::= { agentTrustedHostEntry 7 }
+
+ agentTrustedHostForHTTP OBJECT-TYPE
+ SYNTAX INTEGER {
+ enabled(1),
+ disabled(2)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Specifies the trusted host for HTTP."
+ ::= { agentTrustedHostEntry 8 }
+
+ agentTrustedHostForHTTPS OBJECT-TYPE
+ SYNTAX INTEGER {
+ enabled(1),
+ disabled(2)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Specifies the trusted host for HTTPS."
+ ::= { agentTrustedHostEntry 9 }
+
+ agentTrustedHostForPING OBJECT-TYPE
+ SYNTAX INTEGER {
+ enabled(1),
+ disabled(2)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Specifies the trusted host for PING."
+ ::= { agentTrustedHostEntry 10 }
+
+ agentTrustedHostAddrType OBJECT-TYPE
+ SYNTAX InetAddressType
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The type of trusted host address as specified by
+ the 'agentTrustedHostAddr' object."
+ ::= { agentTrustedHostEntry 11 }
+
+ agentTrustedHostAddr OBJECT-TYPE
+ SYNTAX InetAddress
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Specifies the IP address of the trusted host."
+ ::= { agentTrustedHostEntry 12 }
+
+ agentTrustedHostIPv6PrefixLen OBJECT-TYPE
+ SYNTAX INTEGER (1..128)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Specifies the IPv6 prefix length of the IPv6 trusted host."
+ ::= { agentTrustedHostEntry 13 }
+
+-- -----------------------------------------------------------------------------
+-- agentTrustedHostDelAllState
+-- -----------------------------------------------------------------------------
+ agentTrustedHostDelAllState OBJECT-TYPE
+ SYNTAX INTEGER{
+ none(1),
+ start(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Used to delete all trusted host entries."
+ ::= { agentTrustedHostMgmt 2 }
+
+-- -----------------------------------------------------------------------------
+-- agentFDBMgmt
+-- -----------------------------------------------------------------------------
+ agentFDBMgmt OBJECT IDENTIFIER ::= { agentBasicConfig 11 }
+ agentFDBClearAllState OBJECT-TYPE
+ SYNTAX INTEGER{
+ other(1),
+ start(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Used to clear all FDB entries."
+ ::= { agentFDBMgmt 1 }
+
+ agentFDBClearByPortTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AgentFDBClearByPortEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Used to clear FDB entries by port."
+ ::= { agentFDBMgmt 2 }
+
+ agentFDBClearByPortEntry OBJECT-TYPE
+ SYNTAX AgentFDBClearByPortEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This is an entry of the agentFDBClearByPortTable."
+ INDEX { agentFDBClearPortIndex }
+ ::= { agentFDBClearByPortTable 1 }
+
+ AgentFDBClearByPortEntry ::=
+ SEQUENCE {
+ agentFDBClearPortIndex
+ INTEGER,
+ agentFDBClearByPortAction
+ INTEGER
+ }
+ agentFDBClearPortIndex OBJECT-TYPE
+ SYNTAX INTEGER(1..65535)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This object indicates the port number."
+ ::= { agentFDBClearByPortEntry 1 }
+
+ agentFDBClearByPortAction OBJECT-TYPE
+ SYNTAX INTEGER{
+ other(1),
+ start(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object indicates whether to clear FDB or not."
+ ::= { agentFDBClearByPortEntry 2 }
+
+ agentFDBClearByVlanTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AgentFDBClearByVlanEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Used to clear FDB entries by port."
+ ::= { agentFDBMgmt 3 }
+
+ agentFDBClearByVlanEntry OBJECT-TYPE
+ SYNTAX AgentFDBClearByVlanEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This is an entry of agentFDBClearByPortTable."
+ INDEX { agentFDBClearVid }
+ ::= { agentFDBClearByVlanTable 1 }
+
+ AgentFDBClearByVlanEntry ::=
+ SEQUENCE {
+ agentFDBClearVid
+ VlanId,
+ agentFDBClearByVlanAction
+ INTEGER
+ }
+
+ agentFDBClearVid OBJECT-TYPE
+ SYNTAX VlanId
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This object indicates the VLAN-ID."
+ ::= { agentFDBClearByVlanEntry 1 }
+
+ agentFDBClearByVlanAction OBJECT-TYPE
+ SYNTAX INTEGER{
+ other(1),
+ start(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object indicates whether to clear the FDB or not."
+ ::= { agentFDBClearByVlanEntry 2 }
+
+ agentFDBSecurityTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AgentFDBSecurityEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Used to display the FDB entries that have been created by the security module."
+ ::= { agentFDBMgmt 4}
+
+ agentFDBSecurityEntry OBJECT-TYPE
+ SYNTAX AgentFDBSecurityEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This is an entry of agentFDBSecurityTable."
+ INDEX {
+ agentFDBVid,
+ agentFDBMacAddress
+ }
+ ::= { agentFDBSecurityTable 1 }
+
+ AgentFDBSecurityEntry ::=
+ SEQUENCE {
+ agentFDBVid
+ VlanId,
+ agentFDBMacAddress
+ MacAddress,
+ agentFDBPort
+ INTEGER,
+ agentFDBType
+ INTEGER,
+ agentFDBStatus
+ INTEGER,
+ agentFDBSecurityModule
+ INTEGER
+ }
+
+ agentFDBVid OBJECT-TYPE
+ SYNTAX VlanId
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This object indicates the VLAN-ID."
+ ::= { agentFDBSecurityEntry 1 }
+
+ agentFDBMacAddress OBJECT-TYPE
+ SYNTAX MacAddress
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This object indicates the MAC address."
+ ::= { agentFDBSecurityEntry 2 }
+
+ agentFDBPort OBJECT-TYPE
+ SYNTAX INTEGER(1..65535)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object indicates the port number."
+ ::= { agentFDBSecurityEntry 3 }
+
+ agentFDBType OBJECT-TYPE
+ SYNTAX INTEGER{
+ dynamic(1),
+ static(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object indicates the MAC address type."
+ ::= { agentFDBSecurityEntry 4 }
+
+ agentFDBStatus OBJECT-TYPE
+ SYNTAX INTEGER{
+ drop(1),
+ forward(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object indicates the MAC address's forwarding status."
+ ::= { agentFDBSecurityEntry 5}
+
+ agentFDBSecurityModule OBJECT-TYPE
+ SYNTAX INTEGER{
+ dot1x(1),
+ wac(2),
+ jwac(3),
+ port-security(4),
+ mac-based-access-control(5),
+ compound-authentication(6)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object is used to indicate which security module created the current MAC address.
+ dot1x: 802.1X.
+ wac: Web-based Access Control.
+ jwac: Web-Based Access Control extension for Japan.
+ port-security: Port Security.
+ mac-based-access-control: MAC-based Access Control.
+ compound-authentication: Compound Authentication."
+ ::= { agentFDBSecurityEntry 6}
+
+
+-- -----------------------------------------------------------------------------
+-- agentARPMgmt
+-- -----------------------------------------------------------------------------
+ agentARPMgmt OBJECT IDENTIFIER ::= { agentBasicConfig 12 }
+ agentARPClearAllState OBJECT-TYPE
+ SYNTAX INTEGER{
+ other(1),
+ start(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Used to clear all ARP entries."
+ ::= { agentARPMgmt 1 }
+
+-- -----------------------------------------------------------------------------
+-- agentGratuitousARPMgmt
+-- -----------------------------------------------------------------------------
+ agentGratuitousARPMgmt OBJECT IDENTIFIER ::={agentARPMgmt 2}
+
+ agentGratuitousARPSendIpifStatusUpState OBJECT-TYPE
+ SYNTAX INTEGER{
+ enabled(1),
+ disabled(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This is used to enable/disable sending of gratuitous ARP request
+ packets while the IPIF interface comes up. This is used to automatically
+ announce the interface's IP address to other nodes. By default,
+ the state is enabled, and only one ARP packet will be broadcast."
+ DEFVAL { enabled }
+ ::={ agentGratuitousARPMgmt 1}
+
+ agentGratuitousARPSendDupIpDetectedState OBJECT-TYPE
+ SYNTAX INTEGER{
+ enabled(1),
+ disabled(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This is used to enable/disable the sending of gratuitous ARP request
+ packets while a duplicate IP is detected. By default, the state is enabled.
+ The duplicate IP detected state indicates that the system has received an ARP request
+ packet that was sent by an IP address that matches the system's own IP address.
+ In this case, the system knows that somebody out there is using an IP address
+ that is in conflict with the system. In order to reclaim the correct host
+ of this IP address, the system can send out the gratuitous ARP request
+ packet for this duplicate IP address."
+ DEFVAL { enabled }
+ ::={ agentGratuitousARPMgmt 2}
+
+ agentGratuitousARPLearningState OBJECT-TYPE
+ SYNTAX INTEGER{
+ enabled(1),
+ disabled(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This is used to enable/disable learning of an ARP entry in the ARP
+ cache based on the received gratuitous ARP packet. If the switch
+ receives a gratuitous ARP request/reply packet and the sender's
+ IP address is in its ARP table, it should update the ARP entry.
+ By default, the state is disabled."
+ DEFVAL { disabled }
+ ::={ agentGratuitousARPMgmt 3}
+
+ agentGratuitousARPTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AgentGratuitousARPEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Gratuitous ARP Table Information."
+ ::={ agentGratuitousARPMgmt 4}
+
+ agentGratuitousARPEntry OBJECT-TYPE
+ SYNTAX AgentGratuitousARPEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A list of information from the Gratuitous ARP Table."
+ INDEX {
+ agentGratuitousARPInterfaceName
+ }
+ ::={ agentGratuitousARPTable 1 }
+
+ AgentGratuitousARPEntry ::=
+ SEQUENCE {
+ agentGratuitousARPInterfaceName
+ DisplayString,
+ agentGratuitousARPPeriodicalSendInterval
+ INTEGER,
+ agentGratuitousARPTrapState
+ INTEGER,
+ agentGratuitousARPLogState
+ INTEGER
+ }
+
+ agentGratuitousARPInterfaceName OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The name of the IP interface."
+ ::={agentGratuitousARPEntry 1}
+
+ agentGratuitousARPPeriodicalSendInterval OBJECT-TYPE
+ SYNTAX INTEGER (0..65535)
+ UNITS "seconds"
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This is used to configure the interval for the periodic sending of
+ gratuitous ARP request packets.
+ 0 means do not send gratuitous ARP request packets periodically."
+ DEFVAL { 0 }
+ ::={agentGratuitousARPEntry 2}
+
+ agentGratuitousARPTrapState OBJECT-TYPE
+ SYNTAX INTEGER{
+ enabled(1),
+ disabled(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This indicates the state of the gratuitous ARP trap. The switch can
+ trap the IP conflict events to inform the administrator.
+ By default, the trap is disabled."
+ DEFVAL { disabled }
+ ::={agentGratuitousARPEntry 3}
+
+ agentGratuitousARPLogState OBJECT-TYPE
+ SYNTAX INTEGER{
+ enabled(1),
+ disabled(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This indicates the state of the gratuitous Log trap. The switch can
+ log the IP conflict events to inform the administrator.
+ By default, the event log is enabled."
+ DEFVAL { enabled }
+ ::={agentGratuitousARPEntry 4}
+
+ agentARPTotalARPEntries OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Used to display the total number of ARP entries."
+ ::= { agentARPMgmt 3 }
+
+ agentARPRetryTimes OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This indicates the retry times of the ARP request."
+ ::= { agentARPMgmt 4 }
+
+-- -----------------------------------------------------------------------------
+-- swMultiImageCtrlTable
+-- -----------------------------------------------------------------------------
+ swMultiImageCtrlTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF SwMultiImageCtrlEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ ""
+ ::= { agentBasicConfig 13 }
+
+ swMultiImageCtrlEntry OBJECT-TYPE
+ SYNTAX SwMultiImageCtrlEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A list of information about multiple image management."
+ INDEX { swMultiImageCtrlID }
+ ::= { swMultiImageCtrlTable 1 }
+
+ SwMultiImageCtrlEntry ::=
+ SEQUENCE {
+ swMultiImageCtrlID
+ INTEGER,
+ swMultiImageCtrlAction
+ INTEGER
+ }
+
+ swMultiImageCtrlID OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The stacking section ID of the firmware image.
+ The stacking section ID = 256 * Unit ID + Image File ID."
+ ::= { swMultiImageCtrlEntry 1 }
+
+ swMultiImageCtrlAction OBJECT-TYPE
+ SYNTAX INTEGER{
+ config-as-bootup-fw(1),
+ delete(2),
+ none(3)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object indicates the running status of the image which is
+ specified by swMultiImageCtrlID and swMultiImageCtrlUnitID.
+
+ config-as-bootup-fw (1) - Configured as the bootup firmware by the indicated firmware(ID).
+ delete (2) - Delete the firmware by indicated firmware ID.
+ none (3) - No action.
+ "
+ ::= { swMultiImageCtrlEntry 2 }
+
+-- -----------------------------------------------------------------------------
+ agentOutOfBandDataBits OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object indicates the out-of-band data bits."
+ ::= { agentBasicConfig 14 }
+
+ agentOutOfBandParityBits OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object indicates the out-of-band parity bits."
+ ::= { agentBasicConfig 15 }
+
+ agentOutOfBandStopBits OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object indicates the out-of-band stop bits."
+ ::= { agentBasicConfig 16 }
+
+ agentOutOfBandAutoLogoutConfig OBJECT-TYPE
+ SYNTAX INTEGER {
+ never(1),
+ minutes-2(2),
+ minutes-5(3),
+ minutes-10(4),
+ minutes-15(5)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object allows the user to specify an out-of-band auto logout time."
+ ::= { agentBasicConfig 17 }
+
+-- -----------------------------------------------------------------------------
+-- agentBscFileSystemMgmt
+-- -----------------------------------------------------------------------------
+ agentBscFileSystemMgmt OBJECT IDENTIFIER ::= { agentBasicConfig 18 }
+
+ agentBscFileSystemTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AgentBscFileSystemEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A list of MIB File System Basic Configuration entries supported
+ by the file update of this agent."
+ ::= { agentBscFileSystemMgmt 1 }
+
+ agentBscFileSystemEntry OBJECT-TYPE
+ SYNTAX AgentBscFileSystemEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A File System basic configuration entry that contains objects
+ describing a particular MIB supported by this agent."
+ INDEX { agentBscFileSystemIndex }
+ ::= { agentBscFileSystemTable 1 }
+
+ AgentBscFileSystemEntry ::=
+ SEQUENCE {
+ agentBscFileSystemIndex
+ Integer32,
+ agentBscFileSystemDscr
+ DisplayString,
+ agentBscFileSystemServerAddr
+ IpAddress,
+ agentBscFileSystemServerIPv6Addr
+ Ipv6Address,
+ agentBscFileSystemServerFileName
+ DisplayString,
+ agentBscFileSystemDeviceDriverID
+ INTEGER,
+ agentBscFileSystemDeviceFileName
+ DisplayString,
+ agentBscFileSystemLoadType
+ INTEGER,
+ agentBscFileSystemCtrlUnitID
+ UnitList,
+ agentBscFileSystemBootUpImage
+ TruthValue,
+ agentBscFileSystemForceAgree
+ TruthValue,
+ agentBscFileSystemCtrl
+ INTEGER,
+ agentBscFileSystemInterfaceName
+ DisplayString,
+ agentBscFileSystemServerDomainName
+ DisplayString,
+ agentBscFileSystemIncrement
+ TruthValue,
+ agentBscFileSystemServerVrfName
+ DisplayString
+
+ }
+
+ agentBscFileSystemIndex OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The table index for the file entry.
+ This object describes the file type.
+ runtime-code (1),
+ log-file (2),
+ cfg-file (3),
+ attack-log-file (7)"
+ ::= { agentBscFileSystemEntry 1 }
+
+ agentBscFileSystemDscr OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..64))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The description of the software file purpose in this entry."
+ ::= { agentBscFileSystemEntry 2 }
+
+ agentBscFileSystemServerAddr OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The IP address where the file to be downloaded is located, or the IP address
+ where the file will be uploaded to."
+ ::= { agentBscFileSystemEntry 3 }
+
+ agentBscFileSystemServerIPv6Addr OBJECT-TYPE
+ SYNTAX Ipv6Address
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The IPv6 address where the file is to be downloaded from or uploaded to."
+ ::= { agentBscFileSystemEntry 4 }
+
+
+ agentBscFileSystemServerFileName OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..64))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The name of the file to be downloaded from or uploaded to the TFTP server.
+ If agentBscFileSystemDeviceFileName is not set, the switch will default to using
+ the bootup file as the runtime image for the switch."
+ ::= { agentBscFileSystemEntry 5 }
+
+ agentBscFileSystemDeviceDriverID OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(1),
+ a(2),
+ b(3),
+ c(4),
+ d(5),
+ e(6),
+ f(7),
+ g(8),
+ h(9),
+ i(10),
+ j(11),
+ k(12),
+ l(13),
+ m(14),
+ n(15),
+ o(16),
+ p(17),
+ q(18),
+ r(19),
+ s(20),
+ t(21),
+ u(22),
+ v(23),
+ w(24),
+ x(25),
+ y(26),
+ z(27)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Specifies the drive of the device that the firmware to be uploaded/downloaded is located.
+ If none (1) is specified, the switch will default to the current drive."
+ ::= { agentBscFileSystemEntry 6 }
+
+ agentBscFileSystemDeviceFileName OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..64))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The name of the file to be downloaded to the device, or uploaded from the
+ device. When downloading or uploading, the agentBscFileSystemServerFileName object must also be set."
+ ::= { agentBscFileSystemEntry 7 }
+
+
+ agentBscFileSystemLoadType OBJECT-TYPE
+ SYNTAX INTEGER {
+ other(1),
+ upload(2),
+ download(3)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object allows the user to select a download or upload function for the file.
+
+ Note:
+ For systems that do not support changes to this object, setting a value for
+ this object will cause the system to return a bad-value error message.
+ "
+ ::= { agentBscFileSystemEntry 8 }
+
+ agentBscFileSystemCtrlUnitID OBJECT-TYPE
+ SYNTAX UnitList
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Specifies which unit of the switch stack the firmware image or configuration file should be downloaded from.
+ One or more units can be set in this list. Each bit from left to right represents the
+ switch from unit ID 1 to unit ID 12.
+ If this list is set to null it represents all stack switches."
+ ::= { agentBscFileSystemEntry 9 }
+
+ agentBscFileSystemBootUpImage OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The result of the download will depend on whether the boot_up option has been specified.
+ Case 1: In the case of the master unit providing the file system and the slave unit
+ not providing the file system, when the boot_up parameter is specified, then the file will
+ be downloaded to the boot_up image on the slave. If the boot_up parameter is not specified,
+ then the file will not be downloaded to this slave unit.
+
+ Case 2: In the case of the master unit not providing the file system and the slave unit
+ providing the file system, when the boot_up parameter is specified, then the file will be downloaded
+ to the boot_up image on the slave unit. If boot_up is not specified, then the file will
+ not be downloaded to this slave unit.
+
+ Case 3: In the case of the master unit and the slave unit both supporting or not supporting the
+ file system, the file will be downloaded to the specified file on the slave unit. If boot_up
+ is specified, the downloaded file will be assigned as the boot_up image.
+
+ True: boot_up option is specified.
+ False: boot_up option is not specified.. "
+ ::= { agentBscFileSystemEntry 10 }
+
+ agentBscFileSystemForceAgree OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "When the force_agree option is specified, the reboot command will be executed immediately
+ without any further confirmation from the user.
+
+ True: force_agree option is specified.
+ False: force_agree option is not specified.. "
+ ::= { agentBscFileSystemEntry 11 }
+
+ agentBscFileSystemCtrl OBJECT-TYPE
+ SYNTAX INTEGER {
+ other(1),
+ inactive(2),
+ start(3)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object allows the user to download runtime software. The settings
+ will take effect when the system restarts. See Note (1) below
+
+ Note 1:
+ For systems which do not support value changes to this object,
+ setting these values will cause the system to return a bad-value error message
+
+ start (3) - activate firmware.
+ "
+ ::= { agentBscFileSystemEntry 12 }
+
+ agentBscFileSystemInterfaceName OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..12))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This node is used to specify the interface name when agentBscFileSystemServerIPv6Addr
+ is the local link address."
+ ::= { agentBscFileSystemEntry 13 }
+
+ agentBscFileSystemServerDomainName OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..255))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object indicates the domain name of the TFTP server."
+ ::= { agentBscFileSystemEntry 14 }
+
+ agentBscFileSystemIncrement OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "If increment is specified, then the existing configuration will not be cleared before applying
+ of the new configuration. If it is not specified, then the existing configuration will be cleared
+ before applying of the new configuration.
+ True : keep valid
+ False : erase. "
+ ::= { agentBscFileSystemEntry 15 }
+
+ agentBscFileSystemServerVrfName OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..12))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object indicates the VRF name of the TFTP server.Input string 'reserved'
+ for the global space."
+ ::= { agentBscFileSystemEntry 16}
+
+-- --------------------------------------------------------------------------------
+ agentBscFileSystemSaveConfigDriverID OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(1),
+ a(2),
+ b(3),
+ c(4),
+ d(5),
+ e(6),
+ f(7),
+ g(8),
+ h(9),
+ i(10),
+ j(11),
+ k(12),
+ l(13),
+ m(14),
+ n(15),
+ o(16),
+ p(17),
+ q(18),
+ r(19),
+ s(20),
+ t(21),
+ u(22),
+ v(23),
+ w(24),
+ x(25),
+ y(26),
+ z(27)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The drive on the device that the configuration file is will be saved to.
+ If none (1) is specified, the switch places the file on the current drive by default."
+ ::= { agentBscFileSystemMgmt 2 }
+
+ agentBscFileSystemSaveConfigFileName OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..64))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The name of the configuration file that will be saved to the device.
+ When agentBscFileSystemSaveCfg is set to cfg (2), and if the agentBscFileSystemSaveConfigFileName
+ is not null, the configuration file will be saved to the set file name.
+ If set to null, the configuration file will be saved to the boot_up CFG file. "
+ ::= { agentBscFileSystemMgmt 3 }
+
+ agentBscFileSystemSaveCfg OBJECT-TYPE
+ SYNTAX INTEGER {
+ other(1),
+ cfg(2),
+ log(3),
+ all(4)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This indicates the method of saving information to the NV-RAM of the device.
+ other (1) - None of the following.
+ cfg (2) - Save configuration.
+ log (3) - Save log.
+ all (4) - Save both ( active configuration and log)."
+ ::= { agentBscFileSystemMgmt 4 }
+
+-- -----------------------------------------------------------------------------
+ agentFileSystemConfigTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AgentFileSystemConfigEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table indicates the information about the bootup files."
+ ::= { agentBscFileSystemMgmt 5 }
+
+ agentFileSystemConfigEntry OBJECT-TYPE
+ SYNTAX AgentFileSystemConfigEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A list of information about the bootup files for each unit of the switch stack."
+ INDEX { agentFileSystemUnit }
+ ::= { agentFileSystemConfigTable 1 }
+
+ AgentFileSystemConfigEntry ::=
+ SEQUENCE {
+ agentFileSystemUnit
+ Integer32,
+ agentFileSystemDriverID
+ INTEGER,
+ agentFileSystemBootImage
+ DisplayString,
+ agentFileSystemBootConfig
+ DisplayString,
+ agentFileSystemActConfig
+ DisplayString
+
+ }
+
+ agentFileSystemUnit OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The unit ID."
+ ::= { agentFileSystemConfigEntry 1 }
+
+ agentFileSystemDriverID OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(1),
+ a(2),
+ b(3),
+ c(4),
+ d(5),
+ e(6),
+ f(7),
+ g(8),
+ h(9),
+ i(10),
+ j(11),
+ k(12),
+ l(13),
+ m(14),
+ n(15),
+ o(16),
+ p(17),
+ q(18),
+ r(19),
+ s(20),
+ t(21),
+ u(22),
+ v(23),
+ w(24),
+ x(25),
+ y(26),
+ z(27)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The drive on the device that the configuration file will be saved to.
+ If none (1) is specified, the switch will place the file to the current drive by default."
+ ::= { agentFileSystemConfigEntry 2 }
+
+ agentFileSystemBootImage OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..64))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "When displayed, it shows the current bootup image file name.
+ When set, the set name will be set as the bootup image."
+ ::= { agentFileSystemConfigEntry 3 }
+
+ agentFileSystemBootConfig OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..64))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "When displayed, it shows the current bootup configuration file name.
+ When set, the set name will be set as the bootup configuration."
+ ::= { agentFileSystemConfigEntry 4 }
+
+ agentFileSystemActConfig OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..64))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "When displayed, it shows null.
+ When set, the set name will be active at once, but the set name
+ will not be set as the bootup configuration."
+ ::= { agentFileSystemConfigEntry 5 }
+
+-- -----------------------------------------------------------------------------
+ agentReboot OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(1),
+ start(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Used to restart the switch."
+ ::= { agentBasicConfig 19 }
+
+ agentReset OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(1),
+ config(2),
+ system(3),
+ reset(4),
+ system-exclude-vlan(5),
+ system-exclude-ip(6),
+ system-exclude-vlan-ip(7)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Used to reset all switch parameters.
+
+ none (1): No action. This is the default value of this object.
+ config (2): All parameters are reset to default settings.
+ The device will neither save nor reboot.
+ system (3): All parameters are reset to default settings.
+ The switch will then do a factory reset, save, and reboot.
+ reset (4) : All parameters will be reset to default settings except for the
+ IP address, user account, and history log.
+ The device will neither save nor reboot.
+ system-exclude-vlan(5) : All parameters are reset to default settings except for VLAN.
+ The switch will then save its settings and reboot.
+ system-exclude-ip(6) : All parameters are reset to default settings except IP address.
+ The switch will then save its settings and reboot.
+ system-exclude-vlan-ip(7): All parameters are reset to default settings except VLAN and IP address.
+ The switch will then save its settings and reboot.
+ "
+ ::= { agentBasicConfig 20 }
+
+-- -----------------------------------------------------------------------------
+-- agentFTPFileTable
+-- -----------------------------------------------------------------------------
+ agentFTPFileTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AgentFTPFileEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A list of the MIB Basic Config entries support files updated by this agent."
+ ::= { agentBasicConfig 21 }
+
+ agentFTPFileEntry OBJECT-TYPE
+ SYNTAX AgentFTPFileEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A basic configuration entry containing the objects describing a particular MIB
+ supported by this agent."
+ INDEX { agentFTPFileIndex }
+ ::= { agentFTPFileTable 1 }
+
+ AgentFTPFileEntry ::=
+ SEQUENCE {
+ agentFTPFileIndex
+ Integer32,
+ agentFTPFileDscr
+ DisplayString,
+ agentFTPFileLoadType
+ INTEGER,
+ agentFTPFileAddr
+ IpAddress,
+ agentFTPTCPPort
+ INTEGER,
+ agentFTPFileName
+ DisplayString,
+ agentFTPUserName
+ DisplayString,
+ agentFTPPassword
+ DisplayString,
+ agentFTPFileCtrlID
+ INTEGER,
+ agentFTPFileBIncrement
+ TruthValue,
+ agentFTPFileCtrl
+ INTEGER,
+ agentFTPFileBootUpImage
+ TruthValue,
+ agentFTPFileForceAgree
+ TruthValue,
+ agentFTPFileIPv6Addr
+ DisplayString,
+ agentFTPFileInterfaceName
+ DisplayString,
+ agentFTPFileUnitID
+ UnitList
+ }
+
+ agentFTPFileIndex OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The table index for the file entry. This object describes the file type
+ runtime-code (1),
+ log-file (2),
+ cfg-file (3)"
+ ::= { agentFTPFileEntry 1 }
+
+ agentFTPFileDscr OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..64))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The description of the software file purpose in this entry.
+ Note: For systems which do not support changes to this object, setting a value for
+ this object will cause the system to return bad-value error messages."
+ ::= { agentFTPFileEntry 2 }
+
+ agentFTPFileLoadType OBJECT-TYPE
+ SYNTAX INTEGER {
+ other(1),
+ upload(2),
+ download(3)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object provides the user with a choice of uploading or downloading the selected file.
+ Note: For systems which do not support a change of this object, setting a value to this object
+ will cause the system to return bad-value error messages."
+ ::= { agentFTPFileEntry 3 }
+
+ agentFTPFileAddr OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The IP address that the file to be downloaded is located on, or the IP address
+ where the file will be uploaded to."
+ ::= { agentFTPFileEntry 4 }
+
+ agentFTPTCPPort OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The TCP port number being used to establish the command connection."
+ ::= { agentFTPFileEntry 5 }
+
+ agentFTPFileName OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..128))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The name of the file to be downloaded from, or uploaded to, the FTP server."
+ ::= { agentFTPFileEntry 6 }
+
+ agentFTPUserName OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This is the user name to enter in upload/download. "
+ ::= { agentFTPFileEntry 7 }
+
+ agentFTPPassword OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This is the password to enter for an upload/download."
+ ::= { agentFTPFileEntry 8 }
+
+ agentFTPFileCtrlID OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The section ID of the firmware image or configuration file.
+ A value of 0 indicates the boot-up firmware image or configuration file."
+ ::= { agentFTPFileEntry 9 }
+
+ agentFTPFileBIncrement OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object indicates whether the previous configuration will remain
+ valid or not after downloading the configuration file.
+ True: Keep valid
+ False: Erase. "
+ ::= { agentFTPFileEntry 10 }
+
+
+ agentFTPFileCtrl OBJECT-TYPE
+ SYNTAX INTEGER {
+ other(1),
+ start(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object gives the user the option to download runtime software. The setting will take effect
+ when the system restarts. See Note (1) below
+ Note 1:
+ For systems which do not support changes to this object, setting a value for this object
+ will cause the system to return bad-value error messages. "
+ ::= { agentFTPFileEntry 11 }
+
+ agentFTPFileBootUpImage OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object indicates whether to set the special file as a boot up file or not.
+ True: The boot-up option is specified.
+ False: The boot-up option is not specified."
+ ::= { agentFTPFileEntry 12 }
+
+ agentFTPFileForceAgree OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "When the force-agree option is specified, the reboot command will be executed
+ immediately without any further confirmation from the user.
+ True: Force-agree option is specified.
+ False: Force-agree option is not specified."
+ ::= { agentFTPFileEntry 13 }
+
+ agentFTPFileIPv6Addr OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The IPv6 address where the file is to be downloaded from or uploaded to."
+ ::= { agentFTPFileEntry 14 }
+
+ agentFTPFileInterfaceName OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This node is used to specify the interface name when agentFTPFileIPv6Addr
+ is the local link address. "
+ ::= { agentFTPFileEntry 15 }
+
+ agentFTPFileUnitID OBJECT-TYPE
+ SYNTAX UnitList
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Specifies which unit of the switch stack the firmware image or configuration
+ file should be downloaded from. One or more units can be set in this list. Each
+ bit from left to right represents the switch from unit ID 1 to unit ID 12.If this
+ list is set to null it represents all stack switches."
+ ::= { agentFTPFileEntry 16 }
+-- -----------------------------------------------------------------------------
+-- agentSnmpTrapState
+-- -----------------------------------------------------------------------------
+ agentSnmpTrapState OBJECT-TYPE
+ SYNTAX INTEGER {
+ enabled(1),
+ disabled(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object indicates if the SNMP trap is enabled or disabled."
+ ::= { agentBasicConfig 22 }
+
+-- -----------------------------------------------------------------------------
+-- agentOutOfBandMgmt
+-- -----------------------------------------------------------------------------
+
+ agentOutOfBandMgmt OBJECT IDENTIFIER ::= { agentBasicConfig 23 }
+
+ agentOutOfBandMgmtState OBJECT-TYPE
+ SYNTAX INTEGER {
+ enabled(1),
+ disabled(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Enables or disables the interface."
+ ::= { agentOutOfBandMgmt 1 }
+
+ agentOutOfBandMgmtIpAddr OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The IP address for out of band management. This object can only take the
+ value of the unicast IP address."
+ ::= { agentOutOfBandMgmt 2 }
+
+ agentOutOfBandMgmtSubnetMask OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The IP net mask for out of band management."
+ ::= { agentOutOfBandMgmt 3 }
+
+ agentOutOfBandMgmtGateway OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The gateway for out of band management. "
+ ::= { agentOutOfBandMgmt 4 }
+
+ agentOutOfBandMgmtLinkStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ link-up(1),
+ link-down(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The current Link status for out of band management."
+ ::= { agentOutOfBandMgmt 5 }
+
+
+
+
+
+
+-- -----------------------------------------------------------------------------
+-- agentTrapMgmt
+-- -----------------------------------------------------------------------------
+
+ agentTrapMgmt OBJECT IDENTIFIER ::= { agentBasicConfig 24 }
+
+ agentTrapColdStart OBJECT-TYPE
+ SYNTAX INTEGER {
+ enabled(1),
+ disabled(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "When enabled (1), whenever the device detects a cold start event,
+ a trap will be sent out."
+ ::= { agentTrapMgmt 1 }
+
+ agentTrapWarmStart OBJECT-TYPE
+ SYNTAX INTEGER {
+ enabled(1),
+ disabled(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "When enabled (1), whenever the device detects a warm start event,
+ a trap will be sent out."
+ ::= { agentTrapMgmt 2 }
+
+ agentTrapRmonRisingAlarm OBJECT-TYPE
+ SYNTAX INTEGER {
+ enabled(1),
+ disabled(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "When enabled (1), whenever the device detects a RMON rising alarm
+ event , a trap will be sent out."
+ ::= { agentTrapMgmt 3 }
+
+ agentTrapRmonFallingAlarm OBJECT-TYPE
+ SYNTAX INTEGER {
+ enabled(1),
+ disabled(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "When enabled (1), whenever the device detects a RMON falling alarm
+ event, a trap will be sent out."
+ ::= { agentTrapMgmt 4 }
+
+ agentTrapCfgSave OBJECT-TYPE
+ SYNTAX INTEGER {
+ enabled(1),
+ disabled(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "When enabled (1), whenever the device detects a configuration saving
+ completed event, a trap will be sent out."
+ ::= { agentTrapMgmt 5 }
+
+ agentTrapCfgUpload OBJECT-TYPE
+ SYNTAX INTEGER {
+ enabled(1),
+ disabled(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "When enabled (1), whenever the device detects a configuration
+ uploading completed event, a trap will be sent out."
+ ::= { agentTrapMgmt 6 }
+
+ agentTrapCfgDownload OBJECT-TYPE
+ SYNTAX INTEGER {
+ enabled(1),
+ disabled(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "When enabled (1), whenever the device detects a configuration
+ downloading completed event, a trap will be sent out"
+ ::= { agentTrapMgmt 7 }
+
+
+-- -----------------------------------------------------------------------------
+-- agentFTPFileSystemTable
+-- -----------------------------------------------------------------------------
+ agentFTPFileSystemTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AgentFTPFileSystemEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The FTP management table for the file system"
+ ::= { agentBasicConfig 25 }
+
+ agentFTPFileSystemEntry OBJECT-TYPE
+ SYNTAX AgentFTPFileSystemEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A File System basic configuration entry that contains objects
+ describing a particular MIB supported by this agent."
+ INDEX { agentFTPFileSystemIndex }
+ ::= { agentFTPFileSystemTable 1 }
+
+ AgentFTPFileSystemEntry ::=
+ SEQUENCE {
+ agentFTPFileSystemIndex
+ Integer32,
+ agentFTPFileSystemDscr
+ DisplayString,
+ agentFTPFileSystemLoadType
+ INTEGER,
+ agentFTPFileSystemAddressType
+ InetAddressType,
+ agentFTPFileSystemAddress
+ InetAddress,
+ agentFTPFileSystemTCPPort
+ INTEGER,
+ agentFTPFileSystemServerFileName
+ DisplayString,
+ agentFTPFileSystemDeviceFileName
+ DisplayString,
+ agentFTPFileSystemUserName
+ DisplayString,
+ agentFTPFileSystemPassword
+ DisplayString,
+ agentFTPFileSystemCtrlUnitID
+ UnitList,
+ agentFTPFileSystemBootUpImage
+ TruthValue,
+ agentFTPFileSystemCtrl
+ INTEGER,
+ agentFTPFileSystemVrfName
+ DisplayString
+ }
+
+ agentFTPFileSystemIndex OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The table index for the file entry."
+ ::= { agentFTPFileSystemEntry 1 }
+
+ agentFTPFileSystemDscr OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The description of the software file purpose in this entry."
+ ::= { agentFTPFileSystemEntry 2 }
+
+ agentFTPFileSystemLoadType OBJECT-TYPE
+ SYNTAX INTEGER {
+ other(1),
+ upload(2),
+ download(3)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object allows the user to select a download or upload function for the file."
+ ::= { agentFTPFileSystemEntry 3 }
+
+ agentFTPFileSystemAddressType OBJECT-TYPE
+ SYNTAX InetAddressType
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The address type of agentFTPFileSystemAddress."
+ ::= { agentFTPFileSystemEntry 4 }
+
+ agentFTPFileSystemAddress OBJECT-TYPE
+ SYNTAX InetAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object indicates the FTP server address."
+ ::= {agentFTPFileSystemEntry 5}
+
+ agentFTPFileSystemTCPPort OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The TCP port number being used to establish the control connection."
+ ::= { agentFTPFileSystemEntry 6 }
+
+ agentFTPFileSystemServerFileName OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..64))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The name of the file to be downloaded from or uploaded to the FTP server."
+ ::= { agentFTPFileSystemEntry 7 }
+
+ agentFTPFileSystemDeviceFileName OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..64))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The name of the file to be downloaded to the device, or uploaded from the
+ device.
+ If agentFTPFileSystemDeviceFileName is not set, the switch will default to
+ the bootup file."
+ ::= { agentFTPFileSystemEntry 8 }
+
+ agentFTPFileSystemUserName OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object indicates the user name to access the FTP server."
+ ::= { agentFTPFileSystemEntry 9 }
+
+ agentFTPFileSystemPassword OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object indicates the password to access the FTP server."
+ ::= { agentFTPFileSystemEntry 10 }
+
+ agentFTPFileSystemCtrlUnitID OBJECT-TYPE
+ SYNTAX UnitList
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Specifies which unit of the switch stack the firmware image or configuration
+ file should be downloaded from. One or more units can be set in this list. Each
+ bit from left to right represents the switch from unit ID 1 to unit ID 12.If this
+ list is set to null it represents all stack switches."
+ ::= { agentFTPFileSystemEntry 11 }
+
+ agentFTPFileSystemBootUpImage OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object indicates whether to set the special file as the boot up file or not.
+ True: The boot-up option is specified.
+ False: The boot-up option is not specified."
+ ::= { agentFTPFileSystemEntry 12 }
+
+ agentFTPFileSystemCtrl OBJECT-TYPE
+ SYNTAX INTEGER {
+ other(1),
+ start(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object allows the user to execute an FTP download/upload."
+ ::= { agentFTPFileSystemEntry 13 }
+
+ agentFTPFileSystemVrfName OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..12))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object indicates the VRF name of the FTP server.Input string 'reserved'
+ for the global space."
+ ::= { agentFTPFileSystemEntry 14 }
+
+-- -----------------------------------------------------------------------------
+-- agentBscCMDLogState
+-- -----------------------------------------------------------------------------
+ agentBscCMDLogState OBJECT-TYPE
+ SYNTAX INTEGER {
+ enabled(1),
+ disabled(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object indicates the command logging state."
+ ::= { agentBasicConfig 26 }
+
+-- -----------------------------------------------------------------------------
+-- agentBscBroadcastPingReplyState
+-- -----------------------------------------------------------------------------
+ agentBscBroadcastPingReplyState OBJECT-TYPE
+ SYNTAX INTEGER {
+ enabled(1),
+ disabled(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object indicates the broadcast ping reply state."
+ ::= { agentBasicConfig 27 }
+
+-- -----------------------------------------------------------------------------
+-- agentBscTftpConfigMgmt
+-- -----------------------------------------------------------------------------
+ agentBscTftpConfigMgmt OBJECT IDENTIFIER ::= { agentBasicConfig 28 }
+
+ agentBscTftpCfgFirmwareFile OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..64))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The firmware pathname that needs to be downloaded/uploaded from/to the TFTP server."
+ ::= { agentBscTftpConfigMgmt 1 }
+
+ agentBscTftpCfgConfigFile OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..64))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The configuration pathname that needs to be downloaded/uploaded from/to the TFTP server."
+ ::= { agentBscTftpConfigMgmt 2 }
+
+ agentBscTftpCfgLogFile OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..64))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The log pathname that needs to be uploaded to the TFTP server."
+ ::= { agentBscTftpConfigMgmt 3 }
+
+ agentBscTftpCfgAttackLogFile OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..64))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The attack log pathname that needs to be uploaded to the TFTP server."
+ ::= { agentBscTftpConfigMgmt 4 }
+
+ agentBscTftpCfgCertificateFile OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..64))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The certificate pathname that needs to be downloaded from the TFTP server."
+ ::= { agentBscTftpConfigMgmt 5 }
+
+ agentBscTftpCfgKeyFile OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..64))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The key pathname that needs to be downloaded from the TFTP server."
+ ::= { agentBscTftpConfigMgmt 6 }
+
+ agentBscTftpCfgTechSuooprtFile OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..64))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The technique's support information pathname that needs to be uploaded to the TFTP server."
+ ::= { agentBscTftpConfigMgmt 7 }
+
+ agentBscTftpCfgDebugLogFile OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..64))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The debug log pathname that needs to be uploaded to the TFTP server."
+ ::= { agentBscTftpConfigMgmt 8 }
+
+ agentBscTftpCfgSIMFirmwareFile OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..64))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The firmware pathname that needs to be downloaded/uploaded from/to the TFTP server when it is SIM enabled."
+ ::= { agentBscTftpConfigMgmt 9 }
+
+ agentBscTftpCfgSIMConfigFile OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..64))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The configuration pathname that needs to be downloaded/uploaded from/to the TFTP server when it is SIM enabled."
+ ::= { agentBscTftpConfigMgmt 10 }
+
+ agentBscTftpCfgSIMLogFile OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..64))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The log pathname that needs to be uploaded to the TFTP server when it is SIM enabled."
+ ::= { agentBscTftpConfigMgmt 11 }
+
+ agentBscTftpCfgServerIPAddr OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The IPv4 address of the TFTP server."
+ ::= { agentBscTftpConfigMgmt 12 }
+
+ agentBscTftpCfgServerIPv6Addr OBJECT-TYPE
+ SYNTAX Ipv6Address
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The IPv6 address of the TFTP server."
+ ::= { agentBscTftpConfigMgmt 13 }
+
+ agentBscTftpCfgServerDomainName OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..255))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The domain name of the TFTP server."
+ ::= { agentBscTftpConfigMgmt 14 }
+
+-- -----------------------------------------------------------------------------
+-- agentBscCommunityEncryptionState
+-- -----------------------------------------------------------------------------
+ agentBscCommunityEncryptionState OBJECT-TYPE
+ SYNTAX INTEGER {
+ enabled(1),
+ disabled(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object indicates the encryption state on the SNMP community string."
+ ::= { agentBasicConfig 29 }
+
+-- -----------------------------------------------------------------------------
+-- agentSnmpUdpPort
+-- -----------------------------------------------------------------------------
+ agentSnmpUdpPort OBJECT-TYPE
+ SYNTAX INTEGER (1..65535)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object indicates the snmp udp port number."
+ ::= { agentBasicConfig 30 }
+
+-- -----------------------------------------------------------------------------
+-- agentResponseBroadcastRequest
+-- -----------------------------------------------------------------------------
+ agentResponseBroadcastRequest OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(1),
+ enabled(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object indicates the response broadcast request state."
+ ::= { agentBasicConfig 31 }
+
+-- -----------------------------------------------------------------------------
+-- agentIpProtocolConfig
+-- -----------------------------------------------------------------------------
+ agentIpProtoConfig OBJECT IDENTIFIER ::= { agentGeneralMgmt 3 }
+
+ agentIpNumOfIf OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of IP interfaces supported by this agent."
+ ::= { agentIpProtoConfig 1 }
+
+ agentIpTftpServerAddr OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-write
+ STATUS obsolete
+ DESCRIPTION
+ "The IP address of the TFTP Server."
+ ::= { agentIpProtoConfig 2 }
+
+ agentIpGetIpFrom OBJECT-TYPE
+ SYNTAX INTEGER {
+ other(1),
+ disabled(2),
+ bootp(3),
+ dhcp(4)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object indicates if the agent will get its system IP address
+ from a Bootp/DHCP server at start up."
+ ::= { agentIpProtoConfig 3 }
+
+ agentIpAutoconfig OBJECT-TYPE
+ SYNTAX INTEGER {
+ enabled(1),
+ disabled(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Indicates the status of automatically getting the configuration information
+ from a TFTP server connected to the device."
+ ::= { agentIpProtoConfig 4 }
+
+ agentIpAutoconfigTimeout OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This timer is used to limit the length of time for getting the configuration
+ information from a TFTP server connected to the device."
+ ::= { agentIpProtoConfig 5 }
+
+-- End of agentIpIfTable
+
+-- -----------------------------------------------------------------------------
+-- agentIptrapMangerTable
+-- -----------------------------------------------------------------------------
+ agentIpTrapManager OBJECT IDENTIFIER ::= { agentGeneralMgmt 4 }
+
+-- agentIpTrapManagerTable OBJECT-TYPE-
+-- SYNTAX SEQUENCE OF AgentIpTrapManagerEntry
+-- MAX-ACCESS not-accessible
+-- STATUS current
+-- DESCRIPTION
+-- "A list of trap managers that the SNMP traps will be sent to."
+-- ::= { agentIpTrapManager 1 }
+
+-- agentIpTrapManagerEntry OBJECT-TYPE
+-- SYNTAX AgentIpTrapManagerEntry
+-- MAX-ACCESS not-accessible
+-- STATUS obsolete
+-- DESCRIPTION
+-- "Each entry contains the particular trap manager settings."
+-- INDEX { agentIpTrapManagerIpAddr }
+-- ::= { agentIpTrapManagerTable 1 }
+
+-- -----------------------------------------------------------------------------
+ agentTrapManagerTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AgentTrapManagerEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A list of trap managers that the SNMP traps will be sent to."
+ ::= { agentIpTrapManager 2 }
+
+ agentTrapManagerEntry OBJECT-TYPE
+ SYNTAX AgentTrapManagerEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Each entry contains the particular trap manager's settings."
+ INDEX { agentTrapManagerIndex }
+ ::= { agentTrapManagerTable 1 }
+
+ AgentTrapManagerEntry ::=
+ SEQUENCE {
+ agentTrapManagerIndex
+ INTEGER,
+ agentTrapManagerIpAddr
+ IpAddress,
+ agentTrapManagerComm
+ DisplayString,
+ agentTrapManagerMsgVer
+ INTEGER,
+ agentTrapManagerStatus
+ INTEGER,
+ agentTrapManagerUdpPort
+ INTEGER
+ }
+
+ agentTrapManagerIndex OBJECT-TYPE
+ SYNTAX INTEGER (1..65535)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A value that uniquely identifies trapDestEntry."
+ ::= { agentTrapManagerEntry 1 }
+
+ agentTrapManagerIpAddr OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The destination IP address for SNMP traps."
+ ::= { agentTrapManagerEntry 2 }
+
+ agentTrapManagerComm OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..20))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The community string used to encode SNMP trap packets being sent to the trap
+ manager."
+ ::= { agentTrapManagerEntry 3 }
+
+ agentTrapManagerMsgVer OBJECT-TYPE
+ SYNTAX INTEGER {
+ snmpAgentVersionDependent(1),
+ v1Trap(2),
+ v2Trap(3)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object indicates the version of trap packets that will be sent to
+ this trap manager. The default setting is SNMP Agent Version Dependent.
+
+ Note:
+ Because some of these functions will be limited by the support of
+ the system in question, some selected items may be invalid. If one
+ of these items is selected, a bad value error message will prompt
+ the user.
+"
+ ::= { agentTrapManagerEntry 4 }
+
+ agentTrapManagerStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ other(1),
+ disabled(2),
+ enabled(3)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object indicates whether or not the trap should be sent to
+ the trap manager."
+ ::= { agentTrapManagerEntry 5 }
+
+ agentTrapManagerUdpPort OBJECT-TYPE
+ SYNTAX INTEGER (1..65535)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object indicates the Trap udp port number."
+ ::= { agentTrapManagerEntry 6 }
+
+-- -----------------------------------------------------------------------------
+-- agentPortTrapStateTable
+-- -----------------------------------------------------------------------------
+ agentPortTrapStateTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AgentPortTrapStateEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Use to Set/Get per port trap state."
+ ::= { agentIpTrapManager 3 }
+
+ agentPortTrapStateEntry OBJECT-TYPE
+ SYNTAX AgentPortTrapStateEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This is an entry of the agentPortTrapStateTable."
+ INDEX { agentTrapStatePortIndex }
+ ::= { agentPortTrapStateTable 1 }
+
+ AgentPortTrapStateEntry ::=
+ SEQUENCE {
+ agentTrapStatePortIndex
+ INTEGER,
+ agentPortTrapState
+ INTEGER
+ }
+
+ agentTrapStatePortIndex OBJECT-TYPE
+ SYNTAX INTEGER (1..65535)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This object indicates the port number."
+ ::= { agentPortTrapStateEntry 1 }
+
+ agentPortTrapState OBJECT-TYPE
+ SYNTAX INTEGER {
+ enabled(1),
+ disabled(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object indicates the port trap status."
+ ::= { agentPortTrapStateEntry 2 }
+
+-- -----------------------------------------------------------------------------
+-- Add for Slip_Console mode swtich 11-9-2001 WindChen
+-- -----------------------------------------------------------------------------
+-- agentConsoleModeManager OBJECT IDENTIFIER ::= { agentGeneralMgmt 5 }
+
+
+
+-- -----------------------------------------------------------------------------
+-- Slip Mode Manager
+-- -----------------------------------------------------------------------------
+-- agentSlipModeManager OBJECT IDENTIFIER ::= { agentGeneralMgmt 6 }
+
+
+-- -----------------------------------------------------------------------------
+-- Add common trap management
+-- -----------------------------------------------------------------------------
+ agentNotify OBJECT IDENTIFIER ::= { agentGeneralMgmt 7 }
+
+ agentNotifMgmt OBJECT IDENTIFIER ::= { agentNotify 1 }
+ agentNotifFirmware OBJECT IDENTIFIER ::= { agentNotify 2 }
+
+ agentNotifyPrefix OBJECT IDENTIFIER ::= { agentNotifFirmware 0 }
+
+-- -----------------------------------------------------------------------------
+-- agentNotifMgmt
+-- -----------------------------------------------------------------------------
+
+-- systemSeverityControl OBJECT-TYPE
+-- SYNTAX AgentNotifyLevel
+-- MAX-ACCESS read-write
+-- STATUS current
+-- DESCRIPTION
+-- "Indicates the level of trap severity control. The system has a severity level control
+-- and each trap should have a severity control set. When trap events occur and its severity
+-- is higher than the system severity control level, the trap works as defined. If the event
+-- severity is lower than the system severity control level, the event is ignored as if it did not occur.
+-- "
+-- ::= { agentNotifMgmt 1 }
+
+
+ notifFirmwareMgmt OBJECT IDENTIFIER ::= { agentNotifMgmt 2 }
+
+
+
+
+
+-- -----------------------------------------------------------------------------
+-- agentNotifFirmware OBJECT IDENTIFIER ::= { agentNotifyPrefix 0 }
+
+-- -----------------------------------------------------------------------------
+-- agentNotifFirmware
+-- -----------------------------------------------------------------------------
+ agentsystemRestart NOTIFICATION-TYPE
+ OBJECTS {
+ trapInfosystemRestart
+ }
+ STATUS current
+ DESCRIPTION
+ "This trap contains the reboot information."
+
+ ::= { agentNotifyPrefix 1 }
+
+
+ agentSaveToNVRAM NOTIFICATION-TYPE
+ OBJECTS { unitID
+ }
+ STATUS current
+ DESCRIPTION
+ "This trap is sent whenever all the device configuration has been saved to NV-RAM."
+
+ ::= { agentNotifyPrefix 2 }
+
+ agentFileTransferStatusChange NOTIFICATION-TYPE
+ OBJECTS {
+ unitID,
+ agentStatusFileTransfer
+ }
+ STATUS current
+ DESCRIPTION "File transfer status change notification."
+ ::= { agentNotifyPrefix 3 }
+
+ agentSetToFactoryDefault NOTIFICATION-TYPE
+ OBJECTS { unitID
+ }
+ STATUS current
+ DESCRIPTION
+ "This trap is sent whenever the 'set to factory default' setting has been processed. "
+
+ ::= { agentNotifyPrefix 4 }
+
+ agentGratuitousARPTrap NOTIFICATION-TYPE
+ OBJECTS {
+
+ agentGratuitousARPIpAddr,
+ agentGratuitousARPMacAddr,
+ agentGratuitousARPPortNumber,
+ agentGratuitousARPInterfaceName
+ }
+ STATUS current
+ DESCRIPTION
+ "This trap is sent when there is an IP address conflict."
+ ::={agentNotifyPrefix 5}
+
+ agentLoginFailTrap NOTIFICATION-TYPE
+ OBJECTS {
+ agentLoginType,
+ agentLoginAAAMethod,
+ agentLoginUserName,
+ agentLoginIpAddr,
+ agentLoginMacAddr,
+ agentLoginAAAServerAddr,
+ agentLoginFailInfo
+ }
+ STATUS current
+ DESCRIPTION
+ "The trap is sent when a login has failed through one of the login types (console, Telnet, web, SSL or SSH)."
+ ::={agentNotifyPrefix 6}
+
+ agentFirmwareUpgrade NOTIFICATION-TYPE
+ OBJECTS {
+ swMultiImageVersion
+ }
+ STATUS current
+ DESCRIPTION
+ "This trap is sent when the process of upgrading the firmware via SNMP has finished."
+
+ ::= { agentNotifyPrefix 7 }
+
+ agentAccessFlashFailed NOTIFICATION-TYPE
+ OBJECTS {
+ agentAccessFlashOper,
+ agentAccessFlashAddr
+ }
+ STATUS current
+ DESCRIPTION
+ "The trap is sent when access to the flash fails."
+ ::={agentNotifyPrefix 8}
+
+ agentCfgOperCompleteTrap NOTIFICATION-TYPE
+ OBJECTS {
+ unitID,
+ agentCfgOperate,
+ agentLoginUserName
+ }
+ STATUS current
+ DESCRIPTION
+ "The trap is sent when the configuration is completely saved, uploaded
+ or downloaded."
+ ::={agentNotifyPrefix 9}
+
+-- -----------------------------------------------------------------------------
+-- agentNotifEquipment
+-- -----------------------------------------------------------------------------
+
+-- -----------------------------------------------------------------------------
+-- notificationBindings
+-- -----------------------------------------------------------------------------
+ notificationBindings OBJECT IDENTIFIER ::= { agentNotifFirmware 1 }
+
+ unitID OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS accessible-for-notify
+ STATUS current
+ DESCRIPTION
+ "The unit ID of the device which triggered the event."
+ ::= { notificationBindings 1 }
+
+ trapInfosystemRestart OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..64))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object indicates the last time the device rebooted.
+ "
+ ::= { notificationBindings 2 }
+
+ agentGratuitousARPIpAddr OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS accessible-for-notify
+ STATUS current
+ DESCRIPTION
+ "A duplicate IP address with the switch already exists."
+ ::={notificationBindings 3}
+
+ agentGratuitousARPMacAddr OBJECT-TYPE
+ SYNTAX MacAddress
+ MAX-ACCESS accessible-for-notify
+ STATUS current
+ DESCRIPTION
+ "This object is the MAC address of the device which has the duplicate IP address."
+ ::={notificationBindings 4}
+
+ agentGratuitousARPPortNumber OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS accessible-for-notify
+ STATUS current
+ DESCRIPTION
+ "This indicates the portNum with a string.
+ For example, if the device is in standalone mode, and the port
+ number is 23, the string should be 23.
+ If the device is in stacking mode, and the unit ID is 2, and the
+ port number is 3, the string should be 2:3.
+ "
+ ::={notificationBindings 5}
+
+
+ agentLoginType OBJECT-TYPE
+ SYNTAX INTEGER {
+ console(1),
+ telnet(2),
+ web(3),
+ ssl(4),
+ ssh(5)
+ }
+ MAX-ACCESS accessible-for-notify
+ STATUS current
+ DESCRIPTION
+ "The type is the user login method type."
+ ::= { notificationBindings 6 }
+
+ agentLoginAAAMethod OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(1),
+ local(2),
+ server(3)
+ }
+ MAX-ACCESS accessible-for-notify
+ STATUS current
+ DESCRIPTION
+ "This method is the AAA login method."
+ ::= { notificationBindings 7 }
+
+ agentLoginUserName OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS accessible-for-notify
+ STATUS current
+ DESCRIPTION
+ "This object is the name of the user that failed to login to the switch."
+ ::= { notificationBindings 8 }
+
+
+ agentLoginIpAddr OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS accessible-for-notify
+ STATUS current
+ DESCRIPTION
+ "This object is the login type from the IP address."
+ ::= { notificationBindings 9 }
+
+
+ agentLoginMacAddr OBJECT-TYPE
+ SYNTAX MacAddress
+ MAX-ACCESS accessible-for-notify
+ STATUS current
+ DESCRIPTION
+ "This object is the login type from a MAC address."
+ ::= { notificationBindings 10 }
+
+
+ agentLoginAAAServerAddr OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS accessible-for-notify
+ STATUS current
+ DESCRIPTION
+ "This object is the login type through a console authenticated by an AAA server."
+ ::= { notificationBindings 11 }
+
+ agentLoginFailInfo OBJECT-TYPE
+ SYNTAX INTEGER {
+ other(1),
+ authenticate-fail(2),
+ server-timeout(3)
+ }
+ MAX-ACCESS accessible-for-notify
+ STATUS current
+ DESCRIPTION
+ "This object indicates the reason for the login failure."
+ ::= { notificationBindings 12 }
+
+ agentAccessFlashOper OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..64))
+ MAX-ACCESS accessible-for-notify
+ STATUS current
+ DESCRIPTION
+ "This object indicates the operation of the access flash failure."
+ ::= { notificationBindings 13 }
+
+ agentAccessFlashAddr OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS accessible-for-notify
+ STATUS current
+ DESCRIPTION
+ "This object indicates the address of the access flash failure."
+ ::= { notificationBindings 14 }
+
+ agentCfgOperate OBJECT-TYPE
+ SYNTAX INTEGER {
+ save(1),
+ upload(2),
+ download(3)
+ }
+ MAX-ACCESS accessible-for-notify
+ STATUS current
+ DESCRIPTION
+ "This object indicates the operation type of the configuration."
+ ::= { notificationBindings 15 }
+
+END
+
+
+
+
+
+
|