1 files changed, 94 insertions, 0 deletions
diff --git a/MIBS/dell/BROADCOM-REF-MIB b/MIBS/dell/BROADCOM-REF-MIB
new file mode 100644
index 0000000..0ae7537
--- /dev/null
+++ b/MIBS/dell/BROADCOM-REF-MIB
@@ -0,0 +1,94 @@
+BROADCOM-REF-MIB DEFINITIONS ::= BEGIN
+
+-- DELL FASTPATH Reference MIB
+-- Copyright Broadcom Corporation (2001-2007) All rights reserved.
+
+-- This SNMP Management Information Specification
+-- embodies Broadcom Corporation confidential and proprietary
+-- intellectual property.  Broadcom Corporation retains all title
+-- and ownership in the Specification including any revisions.
+
+-- This Specification is supplied "AS IS", Broadcom Corporation
+-- makes no warranty, either expressed or implied,
+-- as to the use, operation, condition, or performance of the
+-- Specification.
+
+
+IMPORTS
+    MODULE-IDENTITY                     FROM SNMPv2-SMI
+    TEXTUAL-CONVENTION                  FROM SNMPv2-TC
+    dellLanExtension			FROM Dell-Vendor-MIB
+    dellLan				FROM Dell-Vendor-MIB;
+
+    lvl7 MODULE-IDENTITY
+        LAST-UPDATED "200311210000Z" -- 21 Nov 2003 12:00:00 GMT
+        ORGANIZATION "Broadcom Corporation"
+        CONTACT-INFO
+          "                      Customer Support
+          Postal:                Broadcom Corporation
+                                 100, Perimeter Park Drive
+                                 Morrisville, NC 27560
+          Tel:                   +1 919 865 2700"
+        DESCRIPTION
+          ""
+
+        -- Revision history.
+        REVISION
+          "200311210000Z" -- 21 Nov 2003 12:00:00 GMT
+        DESCRIPTION
+          "Revisions made for new release."
+        REVISION
+          "200302061200Z" -- 6 February 2003 12:00:00 GMT
+        DESCRIPTION
+          "Updated for release"
+
+    ::= {  dellLanExtension 6132 }
+
+
+-- New definitions
+ lvl7Products             OBJECT IDENTIFIER ::= { lvl7 1 }
+ fastPath                 OBJECT IDENTIFIER ::= { lvl7Products 1 }
+
+-- These OID to be used in sysObjId to identify the specific switch type:
+
+-- sysObjId for 6224
+ dell6224Switch   OBJECT IDENTIFIER ::= { dellLan 3010 }
+-- sysObjId for 6248
+ dell6248Switch   OBJECT IDENTIFIER ::= { dellLan 3011 }
+-- sysObjId for 6224P 
+ dell6224PSwitch   OBJECT IDENTIFIER ::= { dellLan 3012 }
+-- sysObjId for 6248P
+ dell6248PSwitch   OBJECT IDENTIFIER ::= { dellLan 3013 }
+-- sysObjId for 6224F
+ dell6224FSwitch   OBJECT IDENTIFIER ::= { dellLan 3014 }
+-- sysObjId for M6220
+ dellM6220Switch  OBJECT IDENTIFIER ::= { dellLan 3015 }
+
+
+-- New Textual Conventions
+AgentPortMask ::= TEXTUAL-CONVENTION
+   DISPLAY-HINT "255x"
+   STATUS  current
+   DESCRIPTION
+       "Each octet within this value specifies a set of eight
+        ports, with the first octet specifying ports 1 through
+        8, the second octet specifying ports 9 through 16, etc.
+        Within each octet, the most significant bit represents
+        the lowest numbered port, and the least significant bit
+        represents the highest numbered port.  Thus, each port
+        of the bridge is represented by a single bit within the
+        value of this object.  If that bit has a value of '1'
+        then that port is included in the set of ports; the port
+        is not included if its bit has a value of '0'
+
+        When setting this value, the system will ignore
+        configuration for ports not between the first and last
+        valid ports.  Configuration of any port numbers between
+        this range that are not valid ports return a failure
+        message, but will still apply configuration for valid
+        ports."
+   SYNTAX  OCTET STRING (SIZE (1..255))
+
+
+END
+