diff options
Diffstat (limited to 'MIBS/corero/CORERO-CMS-DEVICES-MIB')
| -rw-r--r-- | MIBS/corero/CORERO-CMS-DEVICES-MIB | 339 |
1 files changed, 339 insertions, 0 deletions
diff --git a/MIBS/corero/CORERO-CMS-DEVICES-MIB b/MIBS/corero/CORERO-CMS-DEVICES-MIB new file mode 100644 index 0000000..5a71e36 --- /dev/null +++ b/MIBS/corero/CORERO-CMS-DEVICES-MIB @@ -0,0 +1,339 @@ +CORERO-CMS-DEVICES-MIB DEFINITIONS ::= BEGIN + +IMPORTS + MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, + TimeTicks, Counter32, Unsigned32, Counter64, enterprises, IpAddress + FROM SNMPv2-SMI + DisplayString, TestAndIncr, TimeStamp, RowStatus, TruthValue, TEXTUAL-CONVENTION + FROM SNMPv2-TC + MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP + FROM SNMPv2-CONF + coreroCMSMIBObjects, coreroCMSMIBCompliances, coreroCMSMIBGroups + FROM CORERO-CMS-MIB; + + +devices MODULE-IDENTITY + LAST-UPDATED "202009300000Z" + ORGANIZATION "Corero Network Security" + CONTACT-INFO + "info@corero.com" + DESCRIPTION + "Corero Management Server MIB." + REVISION "201712050000Z" + DESCRIPTION + "Initial revision" + REVISION "201712070000Z" + DESCRIPTION + "Rename of deviceDeploymentAction's 'not-in-progress to 'none'" + REVISION "201712190000Z" + DESCRIPTION + "Updated to support revised operating-modes configuration" + REVISION "201801090000Z" + DESCRIPTION + "Add invalid-modules-detected deploy-state" + REVISION "201802050000Z" + DESCRIPTION + "Rename of deviceHealth object to deviceStatus" + REVISION "201809250000Z" + DESCRIPTION + "Change deviceAdminState to use enabled/disabled" + REVISION "201810020000Z" + DESCRIPTION + "Add redeploy-pending deploy-state" + REVISION "201810080000Z" + DESCRIPTION + "Added unknown device type value" + REVISION "202009030000Z" + DESCRIPTION + "Added deviceHardwareVersion object to deviceStatus" + + ::= { coreroCMSMIBObjects 2 } + +-- devices + +deviceTable OBJECT-TYPE + SYNTAX SEQUENCE OF DeviceEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The table of devices" + ::= { devices 1 } + +deviceEntry OBJECT-TYPE + SYNTAX DeviceEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry within the device table which represents a single device" + INDEX { deviceIndex } + ::= { deviceTable 1 } + +DeviceEntry ::= SEQUENCE { + deviceIndex INTEGER (1..2147483647), + deviceName OCTET STRING, + deviceAddress OCTET STRING, + deviceDescription OCTET STRING, + deviceDefenseMode INTEGER, + deviceAdminState INTEGER, + deviceModel INTEGER, + deviceSerialNumber OCTET STRING, + deviceConnectionState INTEGER, + deviceDeploymentState INTEGER, + deviceDeploymentAction INTEGER, + deviceSXOSVersion OCTET STRING, + deviceSoftwareVersion OCTET STRING, + deviceUptime OCTET STRING, + deviceStatus OCTET STRING, + deviceType INTEGER, + deviceBypassMode INTEGER, + deviceHardwareVersion OCTET STRING +} + +deviceIndex OBJECT-TYPE + SYNTAX INTEGER (1..2147483647) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The SNMP index of the device" + ::= { deviceEntry 1 } + +deviceName OBJECT-TYPE + SYNTAX OCTET STRING + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The name of the device" + ::= { deviceEntry 2 } + +deviceAddress OBJECT-TYPE + SYNTAX OCTET STRING + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The IP address which the CMS uses to look for the device" + ::= { deviceEntry 3 } + +deviceDescription OBJECT-TYPE + SYNTAX OCTET STRING + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The device description. If no description is entered, this is blank." + ::= { deviceEntry 4 } + +deviceDefenseMode OBJECT-TYPE + SYNTAX INTEGER { + monitor(0), + mitigate(1), + pass-through(2), + not-applicable(10) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The configured Defense Mode for the device" + ::= { deviceEntry 5 } + +deviceAdminState OBJECT-TYPE + SYNTAX INTEGER { + disabled(1), + enabled(2) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The current admin-state of the device" + ::= { deviceEntry 6 } + +deviceModel OBJECT-TYPE + SYNTAX INTEGER { + ntd-virtual-edition(0), + ntd1100(1), + ntd120(2), + nba(3), + unknown(4), + ntd280(5) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The type of device" + ::= { deviceEntry 7 } + +deviceSerialNumber OBJECT-TYPE + SYNTAX OCTET STRING + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The serial number of the device" + ::= { deviceEntry 8 } + +deviceConnectionState OBJECT-TYPE + SYNTAX INTEGER { + connected(0), + authentication-failed(1), + connection-timed-out(2), + connection-refused(3), + unknown-connection-error(4), + no-connection(5), + locked-by-user(6) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The current state of the connection between the CMS and the device" + ::= { deviceEntry 9 } + +deviceDeploymentState OBJECT-TYPE + SYNTAX INTEGER { + in-sync(0), + sync-required(1), + force-sync-required(2), + unknown(3), + not-in-cluster(4), + initial-sync-pending(5), + not-licensed(6), + unsupported-version(7), + deploy-pending(8), + unexpected-device-type(9), + invalid-modules-detected(10), + redeploy-pending(11) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The device's current deployment state" + ::= { deviceEntry 10 } + +deviceDeploymentAction OBJECT-TYPE + SYNTAX INTEGER { + none(0), + deploy-in-progress(1), + sync-to-in-progress(2), + force-sync-in-progress(3), + commit-in-progress(4), + upgrade-in-progress(5) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The deployment action the device is currently performing" + ::= { deviceEntry 11 } + +deviceSXOSVersion OBJECT-TYPE + SYNTAX OCTET STRING + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The version number of the device's operating system (SXOS)" + ::= { deviceEntry 12 } + +deviceSoftwareVersion OBJECT-TYPE + SYNTAX OCTET STRING + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The device's current software version in '{MAJOR}.{MINOR}.{PATCH}.{BUILD}' format" + ::= { deviceEntry 13 } + +deviceUptime OBJECT-TYPE + SYNTAX OCTET STRING + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The amount of time since the device was last rebooted in '{DAYS}d {HOURS}h {MINUTES}m {SECONDS}s' format" + ::= { deviceEntry 14 } + +deviceStatus OBJECT-TYPE + SYNTAX OCTET STRING + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The device status indicates whether traffic is running to the device (normal), or if there is an issue which may affect traffic or its connection to the CMS" + ::= { deviceEntry 15 } + +deviceType OBJECT-TYPE + SYNTAX INTEGER { + defense(0), + bypass(1), + unknown(2) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The device type indicates whether this is a Defense (0) or Bypass (1) device" + ::= { deviceEntry 16 } + +deviceBypassMode OBJECT-TYPE + SYNTAX INTEGER { + disabled(0), + automatic(1), + physical-bypass(2), + switched-bypass(3), + monitor-tap(4), + not-applicable(10) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The configured Bypass Mode for this device." + ::= { deviceEntry 17 } + +deviceHardwareVersion OBJECT-TYPE + SYNTAX OCTET STRING + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The device's hardware revision in '{MAJOR}.{MINOR}' format or n/a if not applicable" + ::= { deviceEntry 18 } + + +-- compliance statements + +coreroCMSMIBCompliance MODULE-COMPLIANCE + STATUS current + DESCRIPTION + "The compliance statement for SNMPv2 entities which + implement the SNMPv2 MIB." + MODULE -- this module + -- MANDATORY-GROUPS { snmpGroup, snmpSetGroup, systemGroup, + -- snmpBasicNotificationsGroup } + + GROUP coreroDeviceGroup + DESCRIPTION + "This group is mandatory for SNMPv2 entities which + support community-based authentication." + + ::= { coreroCMSMIBCompliances 2 } + + +-- units of conformance + +coreroDeviceGroup OBJECT-GROUP + OBJECTS { + deviceIndex, + deviceName, + deviceAddress, + deviceDescription, + deviceDefenseMode, + deviceAdminState, + deviceModel, + deviceSerialNumber, + deviceConnectionState, + deviceDeploymentState, + deviceDeploymentAction, + deviceSXOSVersion, + deviceSoftwareVersion, + deviceUptime, + deviceStatus, + deviceType, + deviceBypassMode, + deviceHardwareVersion + } + STATUS current + DESCRIPTION + "A collection of objects providing status and statistics for the site." + ::= { coreroCMSMIBGroups 2 } + + +END |