diff options
Diffstat (limited to 'MIBS/comware/HH3C-FAILOVER-MIB')
| -rw-r--r-- | MIBS/comware/HH3C-FAILOVER-MIB | 325 |
1 files changed, 325 insertions, 0 deletions
diff --git a/MIBS/comware/HH3C-FAILOVER-MIB b/MIBS/comware/HH3C-FAILOVER-MIB new file mode 100644 index 0000000..c862472 --- /dev/null +++ b/MIBS/comware/HH3C-FAILOVER-MIB @@ -0,0 +1,325 @@ +-- ============================================================================ +-- Copyright (c) 2004-2015 New H3C Tech. Co., Ltd. All rights reserved. +-- +-- Description: FAILOVER GROUP MIB +-- Reference: +-- Version: V1.0 +-- History: +-- revision 1.0 2015-10-27 created by j03525 +-- +-- ============================================================================ +HH3C-FAILOVER-MIB DEFINITIONS ::= BEGIN + +IMPORTS + hh3cCommon + FROM HH3C-OID-MIB + Integer32, Unsigned32, OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE + FROM SNMPv2-SMI + DisplayString, RowStatus + FROM SNMPv2-TC; + +hh3cFailover MODULE-IDENTITY + LAST-UPDATED "201510271040Z" + ORGANIZATION + "New H3C Tech. Co., Ltd." + CONTACT-INFO + "Platform Team New H3C Tech. Co., Ltd. + Hai-Dian District Beijing P.R. China + http://www.h3c.com + Zip:100085" + DESCRIPTION + "This MIB file is to provide the definition of failover group. + + Such as: + 1. Configure Failover Groups for a device and display Failover Groups + and their status. + 2. Assign CPU to the Failover Group, and display their status. + + Failover Group: A failover group contains a primary node and a secondary node. + When a failover group is referenced by a service module, the primary node + processes services and backs up service data to the secondary node. + The secondary node does not process services, but it takes over the services + when the primary node fails. + When the primary node is recovered, traffic is switched to the primary node again." + REVISION "201510271040Z" + DESCRIPTION + "The initial revision of this MIB module." + ::= { hh3cCommon 164 } + + +-- Node definitions + +hh3cFailoverScalarObjects OBJECT IDENTIFIER ::= { hh3cFailover 1 } + +hh3cFailoverMaxNum OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The maximum number of Failover groups which the system supported to create, does not include the AutoBackup." + ::= { hh3cFailoverScalarObjects 1 } + + +hh3cFailoverCurrentNum OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The current number of Failover groups which the system has created, does not include the AutoBackup." + ::= { hh3cFailoverScalarObjects 2 } + + +hh3cFailoverTables OBJECT IDENTIFIER ::= { hh3cFailover 2 } + +hh3cFailoverCfgTable OBJECT-TYPE + SYNTAX SEQUENCE OF Hh3cFailoverCfgEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table is for configuration of backup group." + ::= { hh3cFailoverTables 1 } + + +hh3cFailoverCfgEntry OBJECT-TYPE + SYNTAX Hh3cFailoverCfgEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry of the hh3cFailoverGroupCfgTable." + INDEX { hh3cFailoverIndex } + ::= { hh3cFailoverCfgTable 1 } + + +Hh3cFailoverCfgEntry ::= + SEQUENCE + { + hh3cFailoverIndex + Unsigned32, + hh3cFailoverName + DisplayString, + hh3cFailoverPrimaryChassisID + Integer32, + hh3cFailoverPrimarySlotID + Integer32, + hh3cFailoverPrimaryCpuID + Integer32, + hh3cFailoverSecondaryChassisID + Integer32, + hh3cFailoverSecondarySlotID + Integer32, + hh3cFailoverSecondaryCpuID + Integer32, + hh3cFailoverState + INTEGER, + hh3cFailoverRowStatus + RowStatus + } + +hh3cFailoverIndex OBJECT-TYPE + SYNTAX Unsigned32 (0..4294967295) + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "Failover group ID is used as group index, the value range of failover group ID + depends on the device model. + The failover GroupIndex cannot be modified after creation." + ::= { hh3cFailoverCfgEntry 1 } + + +hh3cFailoverName OBJECT-TYPE + SYNTAX DisplayString (SIZE (1..63)) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Specifies the backup group name, a case-sensitive string of 1 to 63 characters. + The failover group name cannot be modified after creation. + The name can not include '?', and can not begin or end with ' '." + ::= { hh3cFailoverCfgEntry 2 } + + +hh3cFailoverPrimaryChassisID OBJECT-TYPE + SYNTAX Integer32 (-1..255) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Specifies a card on an IRF member device. The chassis-number argument represents + the member ID of the IRF member device. (Distributed devices In IRF mode.) + On a centralized or distributed device, the value for this node is always zero. + Note:The -1 for delete the node." + ::= { hh3cFailoverCfgEntry 3 } + + +hh3cFailoverPrimarySlotID OBJECT-TYPE + SYNTAX Integer32 (-1..255) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Specifies a card by its slot number. (Distributed devices In standalone mode.) + Note:The -1 for delete the node." + ::= { hh3cFailoverCfgEntry 4 } + + +hh3cFailoverPrimaryCpuID OBJECT-TYPE + SYNTAX Integer32 (-1..7) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Specifies a CPU by its number. This option is available only if multiple CPUs + are available on the specified slot. + Note:The -1 for delete the node." + ::= { hh3cFailoverCfgEntry 5 } + + +hh3cFailoverSecondaryChassisID OBJECT-TYPE + SYNTAX Integer32 (-1..255) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Specifies a card on an IRF member device. The chassis-number argument represents + the member ID of the IRF member device. (Distributed devices In IRF mode.) + On a centralized or distributed device, the value for this node is always zero. + Note:The -1 for delete the node." + ::= { hh3cFailoverCfgEntry 6 } + + +hh3cFailoverSecondarySlotID OBJECT-TYPE + SYNTAX Integer32 (-1..255) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Specifies a card by its slot number. (Distributed devices In standalone mode.) + Note:The -1 for delete the node." + ::= { hh3cFailoverCfgEntry 7 } + + +hh3cFailoverSecondaryCpuID OBJECT-TYPE + SYNTAX Integer32 (-1..7) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Specifies a CPU by its number. This option is available only if multiple CPUs + are available on the specified slot. + Note:The -1 for delete the node." + ::= { hh3cFailoverCfgEntry 8 } + + +hh3cFailoverState OBJECT-TYPE + SYNTAX INTEGER + { + initial(1), + normal(2), + fault(3) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Backup group state: + Initial: No node in the failover group is processing services. + Normal: The primary node is processing services. + Fault: The secondary node is processing services." + ::= { hh3cFailoverCfgEntry 9 } + + +hh3cFailoverRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The status of this table entry. + Only support active(1), createAndGo(4) and destroy(6)." + ::= { hh3cFailoverCfgEntry 10 } + +-- +-- Notification definitions +-- +-- ================================================================= +-- Traps are defined below. +hh3cFailoverNotification OBJECT IDENTIFIER ::= { hh3cFailover 3 } + +-- All objects used for TRAP only are defined here. +hh3cFailoverTrap OBJECT IDENTIFIER ::= { hh3cFailoverNotification 0 } + +hh3cFailoverCreate NOTIFICATION-TYPE + OBJECTS + { + hh3cFailoverIndex, + hh3cFailoverName + } + + STATUS current + DESCRIPTION + "The hh3cFailoverCreate trap indicates that the failover group has created." + ::= { hh3cFailoverTrap 1 } + +hh3cFailoverDelete NOTIFICATION-TYPE + OBJECTS + { + hh3cFailoverIndex, + hh3cFailoverName + } + STATUS current + DESCRIPTION + "The hh3cFailoverDelete trap indicates that the failover group has deleted." + ::= { hh3cFailoverTrap 2 } + +hh3cFailoverPrimaryNodeAdd NOTIFICATION-TYPE + OBJECTS + { + hh3cFailoverIndex, + hh3cFailoverName, + hh3cFailoverPrimaryChassisID, + hh3cFailoverPrimarySlotID, + hh3cFailoverPrimaryCpuID + } + STATUS current + DESCRIPTION + "The hh3cFailoverPrimaryNodeAdd trap indicates that the failover group has + added the primary node." + ::= { hh3cFailoverTrap 3 } + +hh3cFailoverPrimaryNodeRemove NOTIFICATION-TYPE + OBJECTS + { + hh3cFailoverIndex, + hh3cFailoverName, + hh3cFailoverPrimaryChassisID, + hh3cFailoverPrimarySlotID, + hh3cFailoverPrimaryCpuID + } + STATUS current + DESCRIPTION + "The hh3cFailoverPrimaryNodeRemove trap indicates that the failover group has + removed the primary node." + ::= { hh3cFailoverTrap 4 } + +hh3cFailoverSecondaryNodeAdd NOTIFICATION-TYPE + OBJECTS + { + hh3cFailoverIndex, + hh3cFailoverName, + hh3cFailoverSecondaryChassisID, + hh3cFailoverSecondarySlotID, + hh3cFailoverSecondaryCpuID + } + STATUS current + DESCRIPTION + "The hh3cFailoverSecondaryNodeAdd trap indicates that the failover group has + added the secondary node." + ::= { hh3cFailoverTrap 5 } + +hh3cFailoverSecondaryNodeRemove NOTIFICATION-TYPE + OBJECTS + { + hh3cFailoverIndex, + hh3cFailoverName, + hh3cFailoverSecondaryChassisID, + hh3cFailoverSecondarySlotID, + hh3cFailoverSecondaryCpuID + } + STATUS current + DESCRIPTION + "The hh3cFailoverSecondaryNodeRemove trap indicates that the failover group has + removed the secondary node." + ::= { hh3cFailoverTrap 6 } + +END |