summaryrefslogtreecommitdiff
path: root/MIBS/comware/HH3C-DOT3-EFM-EPON-MIB
diff options
context:
space:
mode:
Diffstat (limited to 'MIBS/comware/HH3C-DOT3-EFM-EPON-MIB')
-rw-r--r--MIBS/comware/HH3C-DOT3-EFM-EPON-MIB1268
1 files changed, 1268 insertions, 0 deletions
diff --git a/MIBS/comware/HH3C-DOT3-EFM-EPON-MIB b/MIBS/comware/HH3C-DOT3-EFM-EPON-MIB
new file mode 100644
index 0000000..91ca621
--- /dev/null
+++ b/MIBS/comware/HH3C-DOT3-EFM-EPON-MIB
@@ -0,0 +1,1268 @@
+--===========================================================
+-- Copyright (C) 2003 New H3C Tech. Co., Ltd. All rights reserved.
+-- Description: This MIB is excerpted from the draft-ietf-hubmib-efm-epon-mib-02 directly
+--- only changed the object name,added the hh3c as prefix.
+-- Reference:
+-- Version: V1.0
+-- History:
+-- V1.0 created by liyue.
+-- Define MODULE-IDENTITY for hh3cDot3EfmeponMIB
+--=================================================================
+HH3C-DOT3-EFM-EPON-MIB DEFINITIONS ::= BEGIN
+
+ IMPORTS
+ hh3cEpon
+ FROM HH3C-OID-MIB
+ MODULE-IDENTITY, mib-2, OBJECT-TYPE, Counter32,
+ Integer32, OBJECT-IDENTITY
+ FROM SNMPv2-SMI
+ TruthValue, MacAddress
+ FROM SNMPv2-TC
+ ifIndex
+ FROM IF-MIB
+ MODULE-COMPLIANCE, OBJECT-GROUP
+ FROM SNMPv2-CONF;
+
+ hh3cDot3EfmeponMIB MODULE-IDENTITY
+ LAST-UPDATED "200409210000Z" -- September 21, 2004
+ ORGANIZATION
+ "New H3C Tech. Co., Ltd."
+ CONTACT-INFO
+ "Platform Team New H3C Tech. Co., Ltd.
+ Hai-Dian District Beijing P.R. China
+ http://www.h3c.com
+ Zip:100085
+ "
+ DESCRIPTION
+ "The objects in this MIB module are used to manage the
+ Ethernet in the First Mile (EFM) Multi Point Control
+ Protocol (MPCP) Interfaces as defined in IEEE Draft
+ P802.3ah/D3.0 clause 64,65.
+ The following reference is used throughout this MIB module:
+ [802.3ah] refers to:
+ IEEE Draft P802.3ah/D3.3: 'Draft amendment to -
+ Information technology - Telecommunications and
+ information exchange between systems - Local and
+ metropolitan area networks - Specific requirements -
+ Part 3: Carrier sense multiple access with collision
+ detection (CSMA/CD) access method and physical layer
+ specifications - Media Access Control Parameters,
+ Physical Layers and Management Parameters for
+ subscriber access networks', 22 April 2004.
+
+ Of particular interest are Clause 64(MPCP) 65(P2MP RS) and
+ 60 (PON PMDs). Clause 30, 'Management', and Clause 45,
+ 'Management Data Input/Output (MDIO) Interface'.
+
+ Copyright (C) The Internet Society (2004). This version
+ of this MIB module is part of XXXX see the RFC itself for
+ full legal notices."
+
+ -- Editor's Note: Replace XXXX with the actual RFC number
+ -- assigned by RFC Editor and remove this note
+
+ REVISION "200409210000Z" -- September 21, 2004
+ DESCRIPTION "Initial version, published as RFC XXXX."
+
+ ::= { hh3cEpon 2 }
+
+ -- Editor's Note: Replace XXX with a real OID once it is
+ -- assigned by IANA and remove this note.
+
+
+ -- Editor-s note: MPCP MIB modules definitions ([802.3ah]
+ --- clause 30.3.5)
+ -- Editor-s note: Description in attributes with References should be
+ -- minimized in later versions
+
+ hh3cDot3MpcpMIB OBJECT IDENTIFIER ::= { hh3cDot3EfmeponMIB 1 }
+
+ hh3cDot3MpcpObjects OBJECT IDENTIFIER ::= { hh3cDot3MpcpMIB 1 }
+
+ hh3cDot3MpcpConformance OBJECT IDENTIFIER ::= { hh3cDot3MpcpMIB 2 }
+
+ hh3cDot3MpcpTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF Hh3cDot3MpcpEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Table for dot3 Multi-Point Control Protocol (MPCP)
+ MIB modules."
+ ::= { hh3cDot3MpcpObjects 1 }
+
+ hh3cDot3MpcpEntry OBJECT-TYPE
+ SYNTAX Hh3cDot3MpcpEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry in the dot3 MPCP MIB modules table."
+ INDEX { ifIndex }
+ ::= { hh3cDot3MpcpTable 1 }
+
+ Hh3cDot3MpcpEntry ::=
+ SEQUENCE {
+ hh3cDot3MpcpID Integer32,
+ hh3cDot3MpcpOperStatus TruthValue,
+ hh3cDot3MpcpMode INTEGER,
+ hh3cDot3MpcpLinkID Integer32,
+ hh3cDot3MpcpRemoteMACAddress MacAddress,
+ hh3cDot3MpcpRegistrationState INTEGER,
+ hh3cDot3MpcpTransmitElapsed Integer32,
+ hh3cDot3MpcpReceiveElapsed Integer32,
+ hh3cDot3MpcpRoundTripTime Integer32,
+ hh3cDot3MpcpMaximumPendingGrants Integer32,
+ hh3cDot3MpcpAdminState TruthValue,
+ hh3cDot3MpcpOnTime Integer32,
+ hh3cDot3MpcpOffTime Integer32,
+ hh3cDot3MpcpSyncTime Integer32
+ }
+
+ hh3cDot3MpcpID OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This variable is assigned so as to uniquely identify the
+ Multi-Point MAC Control (MPCP) entity, as defined in
+ [802.3ah] clause 64, among the subordinate managed
+ objects of the containing object.
+ This attribute is relevant for an OLT and an ONU."
+ REFERENCE "[802.3ah], 30.3.5.1.1."
+ ::= { hh3cDot3MpcpEntry 1 }
+
+
+ hh3cDot3MpcpOperStatus OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This variable can be used to define the operational
+ state of the Multi-Point MAC Control sublayer as
+ defined in [802.3ah] clause 64. Selecting admin for an
+ interface with Multi-Point MAC Control sublayer. When
+ the attribute is True the the interface will act as if
+ Multi-point control protocol is enabled. When the
+ attribute is False the interface will act as if it does
+ not have the Multi-point control protocol. The
+ operational state can be changed using the
+ hh3cDot3MpcpAdminState attribute.
+ This attribute is relevant for an OLT and an ONU."
+ REFERENCE "[802.3ah], 30.3.5.1.2."
+ ::= { hh3cDot3MpcpEntry 2 }
+
+ hh3cDot3MpcpMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ olt(1),
+ onu(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This variable can be used to identify the operational
+ state of the Multi-Point MAC Control sublayer as
+ defined in [802.3ah] clause 64. Selecting olt(1) for an
+ OLT (server) mode and onu(2) for an ONU (client) mode.
+ Writing can be done during only during initialization,
+ when hh3cDot3MpcpOperStatus indicates Flase.
+ This attribute is relevant for an OLT and an ONU."
+ REFERENCE "[802.3ah], 30.3.5.1.3."
+ DEFVAL { 1 }
+ ::= { hh3cDot3MpcpEntry 3 }
+
+ hh3cDot3MpcpLinkID OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A read-only value that identifies the Logical Link
+ identity (LLID) associated with the MAC port as
+ specified in [802.3ah] clause 65.1.3.2.2.
+ This attribute is relevant for an OLT and an ONU."
+ REFERENCE "[802.3ah], 30.3.5.1.4."
+ ::= { hh3cDot3MpcpEntry 4 }
+
+ hh3cDot3MpcpRemoteMACAddress OBJECT-TYPE
+ SYNTAX MacAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A read-only value that identifies the source_address
+ parameter of the last MPCPDUs passed to the MAC Control.
+ This value is updated on reception of a valid frame with
+ (1) a destination Field equal to the reserved multicast
+ address for MAC Control specified in [802.3ah] Annex
+ 31A, (2) lengthOrType field value equal to the reserved
+ Type for MAC Control as specified in [802.3ah] Annex
+ 31A. (3) an MPCP subtype value equal to the subtype
+ reserved for MPCP as specified in [802.3ah] Annex 31A.
+ This attribute is relevant for an OLT and an ONU."
+ REFERENCE "[802.3ah], 30.3.5.1.5."
+ ::= { hh3cDot3MpcpEntry 5 }
+
+ hh3cDot3MpcpRegistrationState OBJECT-TYPE
+ SYNTAX INTEGER {
+ unregistered(1),
+ registering(2),
+ registered(3)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A read-only value that identifies the operational state
+ of the Multi-Point MAC Control sublayer as defined in
+ [802.3ah] clause 64. When this attribute has the
+ enumeration unregistered(1) the interface may be used
+ for registering a link partner. When this attribute has
+ the enumeration registering(2) the interface is in the
+ process of registering a link-partner. When this
+ attribute has the enumeration registered(3) the
+ interface has an established link-partner.
+ This attribute is relevant for an OLT and an ONU. For
+ the OLT it provides an indication per LLID."
+ REFERENCE "[802.3ah], 30.3.5.1.6."
+ ::= { hh3cDot3MpcpEntry 6 }
+
+ hh3cDot3MpcpTransmitElapsed OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "TQ (16nsec)"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A read-only value that reports the interval from last
+ MPCP frame transmission in increments of Time Quanta
+ (TQ) 16ns. The value returned shall be (interval from
+ last MPCP frame transmission in ns)/16. If this value
+ exceeds (2^32-1) the value (2^32-1) shall be returned.
+ This attribute is relevant for an OLT and an ONU."
+ REFERENCE "[802.3ah], 30.3.5.1.19."
+ ::= { hh3cDot3MpcpEntry 7 }
+
+ hh3cDot3MpcpReceiveElapsed OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "TQ (16nsec)"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A read-only value that reports the interval from last
+ MPCP frame reception in increments of Time Quanta (TQ)
+ 16ns. The value returned shall be (interval from last
+ MPCP last MPCP frame reception in ns)/16. If this value
+ exceeds (2^32-1) the value (2^32-1) shall be returned.
+ This attribute is relevant for an OLT and an ONU."
+ REFERENCE "[802.3ah], 30.3.5.1.20."
+ ::= { hh3cDot3MpcpEntry 8 }
+
+ hh3cDot3MpcpRoundTripTime OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "TQ (16nsec)"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A read-only value that reports the MPCP round trip time
+ in increments of Time Quanta (TQ) 16ns. The value
+ returned shall be (round trip time in ns)/16. If this
+ value exceeds (2^16-1) the value (2^16-1) shall be
+ returned. This attribute is relevant for an OLT and an
+ ONU. For the OLT there is a value per LLID"
+ REFERENCE "[802.3ah], 30.3.5.1.21."
+ ::= { hh3cDot3MpcpEntry 9 }
+
+ hh3cDot3MpcpMaximumPendingGrants OBJECT-TYPE
+ SYNTAX Integer32 (0..255)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A read-only value that indicates the maximum number of
+ grants an ONU can store. The maximum number of grants an
+ ONU can store has a range of 0 to 255.
+ This attribute is relevant for an OLT and an ONU. For
+ the OLT there is a value per LLID"
+ REFERENCE "[802.3ah], 30.3.5.1.24."
+ ::= { hh3cDot3MpcpEntry 10 }
+
+ hh3cDot3MpcpAdminState OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This variable can be used to define the operational
+ state of the Multi-Point MAC Control sublayer as defined
+ in [802.3ah] clause 64. Selecting admin for an interface
+ with Multi-Point MAC Control sublayer. When selecting
+ the value as True the interface Multi-Point control
+ protocol is enabled. When selecting the value as False
+ the interface acts as if the Multi-point Control
+ protocol does not exist. Reading reflects the state of
+ the attribute and the operation of the Multi-point
+ control protocol mode of the interface.
+ Writing can be done all the time.
+ This attribute is relevant for an OLT and an ONU."
+ REFERENCE "[802.3ah], 30.3.5.2.1."
+ DEFVAL { false }
+ ::= { hh3cDot3MpcpEntry 11 }
+
+
+ hh3cDot3MpcpOnTime OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "TQ (16nsec)"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A read-only value that reports the -on time- for a grant
+ burst in increments of Time Quanta (TQ) 16ns as defined
+ in [802.3ah] 60,64. The value returned shall be (on time
+ ns)/16. If this value exceeds (2^32-1) the value
+ (2^32-1) shall be returned.
+ This attribute is relevant for an OLT and an ONU."
+ REFERENCE "[802.3ah], 64.3.5.1."
+ ::= { hh3cDot3MpcpEntry 12 }
+
+ hh3cDot3MpcpOffTime OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "TQ (16nsec)"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A read-only value that reports the -off time- for a
+ grant burst in increments of Time Quanta (TQ) 16ns as
+ defined in [802.3ah] 60,64. The value returned shall be
+ (off time ns)/16. If this value exceeds (2^32-1) the
+ value (2^32-1) shall be returned.
+ This attribute is relevant for an OLT and an ONU."
+ REFERENCE "[802.3ah], 64.3.5.1."
+ ::= { hh3cDot3MpcpEntry 13 }
+
+ hh3cDot3MpcpSyncTime OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "TQ (16nsec)"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A read-only value that reports the -sync lock time- for
+ an OLT receiver in increments of Time Quanta (TQ) 16ns
+ as defined in [802.3ah] 60,64,65. The value returned
+ shall be (sync lock time ns)/16. If this value exceeds
+ (2^32-1) the value (2^32-1) shall be returned.
+ This attribute is relevant for an OLT and an ONU."
+ REFERENCE "[802.3ah], 64.3.3.2."
+ ::= { hh3cDot3MpcpEntry 14 }
+
+
+
+ hh3cDot3MpcpStatTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF Hh3cDot3MpcpStatEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table defines the list of statistics counters of
+ [802.3ah] clause 64 MPCP interface."
+ ::= { hh3cDot3MpcpObjects 2 }
+
+ hh3cDot3MpcpStatEntry OBJECT-TYPE
+ SYNTAX Hh3cDot3MpcpStatEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Table entries for table of statistics counters of
+ [802.3ah] clause 64 MPCP interface."
+ INDEX { ifIndex }
+ ::= { hh3cDot3MpcpStatTable 1 }
+
+ Hh3cDot3MpcpStatEntry ::=
+ SEQUENCE {
+ hh3cDot3MpcpMACCtrlFramesTransmitted Counter32,
+ hh3cDot3MpcpMACCtrlFramesReceived Counter32,
+ hh3cDot3MpcpDiscoveryWindowsSent Counter32,
+ hh3cDot3MpcpDiscoveryTimeout Counter32,
+ hh3cDot3MpcpTxRegRequest Counter32,
+ hh3cDot3MpcpRxRegRequest Counter32,
+ hh3cDot3MpcpTxRegAck Counter32,
+ hh3cDot3MpcpRxRegAck Counter32,
+ hh3cDot3MpcpTxReport Counter32,
+ hh3cDot3MpcpRxReport Counter32,
+ hh3cDot3MpcpTxGate Counter32,
+ hh3cDot3MpcpRxGate Counter32,
+ hh3cDot3MpcpTxRegister Counter32,
+ hh3cDot3MpcpRxRegister Counter32,
+ hh3cDot3MpcpRxNotSupportedMPCP Counter32
+ }
+
+ hh3cDot3MpcpMACCtrlFramesTransmitted OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "frames"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A count of MPCP frames passed to the MAC sublayer for
+ transmission. This counter is incremented when a
+ MA_CONTROL.request service primitive is generated within
+ the MAC control sublayer with an opcode indicating a
+ MPCP frame.
+ This attribute is relevant for an OLT and an ONU."
+ REFERENCE "[802.3ah], 30.3.5.1.7."
+ ::= { hh3cDot3MpcpStatEntry 1 }
+
+ hh3cDot3MpcpMACCtrlFramesReceived OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "frames"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A count of MPCP frames passed by the MAC sublayer to the
+ MAC Control sublayer. This counter is incremented when a
+ ReceiveFrame function call returns a valid frame with:
+ (1) a lengthOrType field value equal to the reserved
+ Type for 802.3_MAC_Control as specified in 31.4.1.3, and
+ (2) an opcode indicating a MPCP frame.
+ This attribute is relevant for an OLT and an ONU."
+ REFERENCE "[802.3ah], 30.3.5.1.8."
+ ::= { hh3cDot3MpcpStatEntry 2 }
+
+ hh3cDot3MpcpDiscoveryWindowsSent OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A count of discovery windows generated. The counter is
+ incremented by one for each generated discovery window.
+ This attribute is relevant for an OLT and an ONU. At the
+ ONU value should be zero."
+ REFERENCE "[802.3ah], 30.3.5.1.22."
+ ::= { hh3cDot3MpcpStatEntry 3 }
+
+ hh3cDot3MpcpDiscoveryTimeout OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A count of the number of times a discovery timeout
+ occurs. Increment the counter by one for each discovery
+ processing state-machine reset resulting from timeout
+ waiting for message arrival.
+ This attribute is relevant for an OLT and an ONU."
+ REFERENCE "[802.3ah], 30.3.5.1.23."
+ ::= { hh3cDot3MpcpStatEntry 4 }
+
+
+ hh3cDot3MpcpTxRegRequest OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "frames"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A count of the number of times a REGISTER_REQ MPCP
+ frames transmission occurs. Increment the counter by one
+ for each REGISTER_REQ MPCP frame transmitted as defined
+ in [802.3ah] clause 64. This counter is mandatory for an
+ ONU. This attribute is relevant for an OLT and an ONU.
+ At the OLT value should be zero."
+ REFERENCE "[802.3ah], 30.3.5.1.12."
+ ::= { hh3cDot3MpcpStatEntry 5 }
+
+ hh3cDot3MpcpRxRegRequest OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "frames"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A count of the number of times a REGISTER_REQ MPCP
+ frames reception occurs. A single counter at the ONU and
+ a set of counters, one for each LLID, at the OLT.
+ Increment the counter by one for each REGISTER_REQ MPCP
+ frame received for each LLID as defined in [802.3ah]
+ clause 64. This counter is mandatory for an ONU and for
+ an OLT. At the ONU value should be zero."
+ REFERENCE "[802.3ah], 30.3.5.1.17."
+ ::= { hh3cDot3MpcpStatEntry 6 }
+
+ hh3cDot3MpcpTxRegAck OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "frames"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A count of the number of times a REGISTER_ACK MPCP
+ frames transmission occurs. Increment the counter by one
+ for each REGISTER_ACK MPCP frame transmitted as defined
+ in [802.3ah] clause 64. This counter is mandatory for an
+ ONU. This attribute is relevant for an OLT and an ONU.
+ At the OLT the value should be zero."
+ REFERENCE "[802.3ah], 30.3.5.1.10."
+ ::= { hh3cDot3MpcpStatEntry 7 }
+
+ hh3cDot3MpcpRxRegAck OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "frames"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A count of the number of times a REGISTER_ACK MPCP
+ frames reception occurs. A single counter at the ONU and
+ a set of counters, one for each LLID, at the OLT.
+ Increment the counter by one for each REGISTER_ACK MPCP
+ frame received for each LLID, as defined in [802.3ah]
+ clause 64. This counter is mandatory for an ONU and for
+ an OLT. At the ONU the value should be zero."
+ REFERENCE "[802.3ah], 30.3.5.1.15."
+ ::= { hh3cDot3MpcpStatEntry 8 }
+
+ hh3cDot3MpcpTxReport OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "frames"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A count of the number of times a REPORT MPCP frames
+ transmission occurs. Increment the counter by one for
+ each REPORT MPCP frame transmitted as defined in
+ [802.3ah] clause 64. This counter is mandatory for an
+ ONU. This attribute is relevant for an OLT and an ONU.
+ At the OLT value should be zero."
+ REFERENCE "[802.3ah], 30.3.5.1.13."
+ ::= { hh3cDot3MpcpStatEntry 9 }
+
+ hh3cDot3MpcpRxReport OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "frames"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A count of the number of times a REPORT MPCP frames
+ reception occurs. A single counter at the ONU and a set
+ of counters, one for each LLID, at the OLT. Increment
+ the counter by one for each REPORT MPCP frame received
+ for each LLID, as defined in [802.3ah] clause 64.
+ This counter is mandatory for an ONU and for an OLT.
+ At the ONU value should be zero."
+ REFERENCE "[802.3ah], 30.3.5.1.18."
+ ::= { hh3cDot3MpcpStatEntry 10 }
+
+ hh3cDot3MpcpTxGate OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "frames"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A count of the number of times a GATE MPCP frames
+ transmission occurs. A set of counters, one for each
+ LLID, at the OLT. Increment the counter by one for each
+ GATE MPCP frame transmitted, for each LLID, as defined
+ in [802.3ah] clause 64. This counter is mandatory for an
+ OLT. This attribute is relevant for an OLT and an ONU.
+ At the ONU the value should be zero."
+ REFERENCE "[802.3ah], 30.3.5.1.9."
+ ::= { hh3cDot3MpcpStatEntry 11 }
+
+ hh3cDot3MpcpRxGate OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "frames"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A count of the number of times a GATE MPCP frames
+ reception occurs. A single counter at the ONU and a set
+ of counters, one for each LLID ,at the OLT. Increment
+ the counter by one for each GATE MPCP frame received,
+ for each LLID, as defined in [802.3ah] clause 64. This
+ counter is mandatory for an ONU and for an OLT. At the
+ OLT the value should be zero."
+ REFERENCE "[802.3ah], 30.3.5.1.14."
+ ::= { hh3cDot3MpcpStatEntry 12 }
+
+ hh3cDot3MpcpTxRegister OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "frames"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A count of the number of times a REGISTER MPCP frames
+ transmission occurs. A set of counters, one for each
+ LLID, at the OLT. Increment the counter by one for each
+ REGISTER MPCP frame transmitted, for each LLID, as
+ defined in [802.3ah] clause 64. This counter is
+ mandatory for an OLT. This attribute is relevant for an
+ OLT and an ONU. At the ONU the value should be zero."
+ REFERENCE "[802.3ah], 30.3.5.1.11."
+ ::= { hh3cDot3MpcpStatEntry 13 }
+
+ hh3cDot3MpcpRxRegister OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "frames"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A count of the number of times a REGISTER MPCP frames
+ reception occurs. A single counter at the ONU and a set
+ of counters, one for each LLID, at the OLT. Increment
+ the counter by one for each REGISTER MPCP frame
+ received, for each LLID, as defined in [802.3ah] clause
+ 64. This counter is mandatory for an ONU and for an OLT.
+ at the OLT the value should be zero."
+ REFERENCE "[802.3ah], 30.3.5.1.16."
+ ::= { hh3cDot3MpcpStatEntry 14 }
+
+ hh3cDot3MpcpRxNotSupportedMPCP OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "frames"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A count of the number of times a non-supported MPCP
+ frames reception occurs. A single counter at the ONU and
+ a set of counters, one for each LLID, at the OLT.
+ Increment the counter by one for each non-supported MPCP
+ frame received, for each LLID, as defined in [802.3ah]
+ clause 64. This counter is mandatory for an ONU and for
+ an OLT."
+ ::= { hh3cDot3MpcpStatEntry 15 }
+
+
+
+
+ -- Conformance Statements
+
+ -- Conformance Groups
+
+ hh3cDot3MpcpGroups OBJECT IDENTIFIER ::= { hh3cDot3MpcpConformance 1 }
+
+ hh3cDot3MpcpGroupBase OBJECT-GROUP
+ OBJECTS {
+ hh3cDot3MpcpID,
+ hh3cDot3MpcpOperStatus,
+ hh3cDot3MpcpMode,
+ hh3cDot3MpcpLinkID,
+ hh3cDot3MpcpRemoteMACAddress,
+ hh3cDot3MpcpRegistrationState,
+ hh3cDot3MpcpMaximumPendingGrants,
+ hh3cDot3MpcpAdminState
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects of dot3 Mpcp Basic entity state
+ definition."
+ ::= { hh3cDot3MpcpGroups 1 }
+
+ hh3cDot3MpcpGroupParam OBJECT-GROUP
+ OBJECTS {
+ hh3cDot3MpcpTransmitElapsed,
+ hh3cDot3MpcpReceiveElapsed,
+ hh3cDot3MpcpRoundTripTime,
+ hh3cDot3MpcpOnTime,
+ hh3cDot3MpcpOffTime,
+ hh3cDot3MpcpSyncTime
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects of dot3 Mpcp for P2MP
+ parameters."
+ ::= { hh3cDot3MpcpGroups 2 }
+
+ hh3cDot3MpcpGroupStat OBJECT-GROUP
+ OBJECTS {
+ hh3cDot3MpcpMACCtrlFramesTransmitted,
+ hh3cDot3MpcpMACCtrlFramesReceived,
+ hh3cDot3MpcpDiscoveryWindowsSent,
+ hh3cDot3MpcpDiscoveryTimeout ,
+ hh3cDot3MpcpTxRegRequest,
+ hh3cDot3MpcpRxRegRequest,
+ hh3cDot3MpcpTxRegAck,
+ hh3cDot3MpcpRxRegAck,
+ hh3cDot3MpcpTxReport,
+ hh3cDot3MpcpRxReport,
+ hh3cDot3MpcpTxGate,
+ hh3cDot3MpcpRxGate,
+ hh3cDot3MpcpTxRegister,
+ hh3cDot3MpcpRxRegister,
+ hh3cDot3MpcpRxNotSupportedMPCP
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects of dot3 Mpcp Statistics"
+ ::= { hh3cDot3MpcpGroups 3 }
+
+
+ -- Compliance
+
+ hh3cDot3MpcpCompliances OBJECT IDENTIFIER ::= { hh3cDot3MpcpConformance 2 }
+
+ hh3cDot3MpcpCompliance MODULE-COMPLIANCE
+ STATUS current
+ DESCRIPTION "The compliance statement for Multi-point
+ control protocol interfaces."
+
+ MODULE -- this module
+ MANDATORY-GROUPS { hh3cDot3MpcpGroupBase }
+
+ GROUP hh3cDot3MpcpGroupParam
+ DESCRIPTION "This group is mandatory for all MPCP supporting
+ interfaces for configuration of the Multipoint
+ Parameters."
+ GROUP hh3cDot3MpcpGroupStat
+ DESCRIPTION "This group is mandatory for all MPCP supporting
+ interfaces for Statistics collection."
+ ::= { hh3cDot3MpcpCompliances 1 }
+
+
+ -- Editor-s note: OMPEmulation managed object definitions
+
+
+ hh3cDot3OmpEmulationMIB OBJECT IDENTIFIER ::= { hh3cDot3EfmeponMIB 2 }
+
+ hh3cDot3OmpEmulationObjects OBJECT IDENTIFIER ::= { hh3cDot3OmpEmulationMIB 1 }
+
+ hh3cDot3OmpeConformance OBJECT IDENTIFIER ::= { hh3cDot3OmpEmulationMIB 2 }
+
+
+ hh3cDot3OmpEmulationTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF Hh3cDot3OmpEmulationEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Table for dot3 OmpEmulation MIB modules."
+ ::= { hh3cDot3OmpEmulationObjects 1 }
+
+ hh3cDot3OmpEmulationEntry OBJECT-TYPE
+ SYNTAX Hh3cDot3OmpEmulationEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry in the dot3 OmpEmulation MIB modules table."
+ INDEX { ifIndex }
+ ::= { hh3cDot3OmpEmulationTable 1 }
+
+ Hh3cDot3OmpEmulationEntry ::=
+ SEQUENCE {
+ hh3cDot3OmpEmulationID Integer32,
+ hh3cDot3OmpEmulationType INTEGER
+ }
+
+ hh3cDot3OmpEmulationID OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The value of hh3cDot3OmpEmulationID is assigned so as to
+ uniquely identify a OMPEmulation entity among the
+ subordinate managed objects of the containing object.
+ The value is mandated for an ONU."
+ REFERENCE "[802.3ah], 30.3.7.1.1."
+ ::= { hh3cDot3OmpEmulationEntry 1 }
+
+ hh3cDot3OmpEmulationType OBJECT-TYPE
+ SYNTAX INTEGER {
+ unknown(1),
+ olt(2),
+ onu(3)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A read-only value that indicates that mode of operation
+ of the Reconciliation Sublayer for Point to Point
+ Emulation (see [802.3ah] clause 65.1). unknown(1) value
+ is assigned in initializing, true state or type not yet
+ known. olt(2) value is assigned when Sublayer operating
+ in OLT mode. onu(3) value is assigned when Sublayer
+ operating in ONU mode."
+ REFERENCE "[802.3ah], 30.3.7.1.2."
+ ::= { hh3cDot3OmpEmulationEntry 2 }
+
+ hh3cDot3OmpEmulationStatTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF Hh3cDot3OmpEmulationStatEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table defines the list of statistics counters of
+ [802.3ah] clause 65 OMP interface."
+ ::= { hh3cDot3OmpEmulationObjects 2 }
+
+ hh3cDot3OmpEmulationStatEntry OBJECT-TYPE
+ SYNTAX Hh3cDot3OmpEmulationStatEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Table entries for Table of statistics counters of
+ [802.3ah] clause 65 OMP interface."
+ INDEX { ifIndex }
+ ::= { hh3cDot3OmpEmulationStatTable 1 }
+
+ Hh3cDot3OmpEmulationStatEntry ::=
+ SEQUENCE {
+ hh3cDot3OmpEmulationSLDErrors Counter32,
+ hh3cDot3OmpEmulationCRC8Errors Counter32,
+ hh3cDot3OmpEmulationBadLLID Counter32,
+ hh3cDot3OmpEmulationGoodLLID Counter32,
+ hh3cDot3OmpEmulationOnuPonCastLLID Counter32,
+ hh3cDot3OmpEmulationOltPonCastLLID Counter32,
+ hh3cDot3OmpEmulationBroadcastLLIDNotOnuID Counter32,
+ hh3cDot3OmpEmulationOnuLLIDNotBroadcast Counter32,
+ hh3cDot3OmpEmulationBroadcastLLIDPlusOnuId Counter32,
+ hh3cDot3OmpEmulationNotBroadcastLLIDNotOnuId Counter32
+ }
+
+ hh3cDot3OmpEmulationSLDErrors OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "frames"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A count of frames received that do not contain a valid
+ SLD field as defined in [802.3ah] clause 65.1.3.3.1.
+ This attribute is mandatory for an OLT and optional for
+ an ONU."
+ REFERENCE "[802.3ah], 30.3.7.1.3."
+ ::= { hh3cDot3OmpEmulationStatEntry 1 }
+
+ hh3cDot3OmpEmulationCRC8Errors OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "frames"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A count of frames received that contain a valid SLD
+ field, as defined in [802.3ah] clause 65.1.3.3.1, but do
+ not pass the CRC-8 check as defined in [802.3ah] clause
+ 65.1.3.3.3. This attribute is mandatory for an OLT and
+ for an ONU."
+ REFERENCE "[802.3ah], 30.3.7.1.4."
+ ::= { hh3cDot3OmpEmulationStatEntry 2 }
+
+
+ hh3cDot3OmpEmulationBadLLID OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "frames"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A count of frames received that contain a valid SLD
+ field, as defined in [802.3ah] clause 65.1.3.3.1, and
+ pass the CRC-8 check, as defined in [802.3ah] clause
+ 65.1.3.3.3, but are discarded due to the LLID check as
+ defined in [802.3ah] clause 65.1.3.3.2.
+ This attribute is relevant for an OLT and an ONU."
+ REFERENCE "[802.3ah], 30.3.7.1.8."
+ ::= { hh3cDot3OmpEmulationStatEntry 3 }
+
+ hh3cDot3OmpEmulationGoodLLID OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "frames"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A count of frames received that contain a valid SLD
+ field, as defined in [802.3ah] clause 65.1.3.3.1, and
+ pass the CRC-8 check, as defined in [802.3ah] clause
+ 65.1.3.3.3.
+ This attribute is relevant for an OLT and an ONU."
+ REFERENCE "[802.3ah], 30.3.7.1.5."
+ ::= { hh3cDot3OmpEmulationStatEntry 4 }
+
+
+ hh3cDot3OmpEmulationOnuPonCastLLID OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "frames"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A count of frames received that contain a valid SLD
+ field in an ONU, as defined in [802.3ah] 65.1.3.3.1,
+ passes the CRC-8 check, as defined in [802.3ah]
+ 65.1.3.3.3, and the frame meets the rule for acceptance
+ defined in [802.3ah] 65.1.3.3.2."
+ REFERENCE "[802.3ah], 30.3.7.1.6."
+ ::= { hh3cDot3OmpEmulationStatEntry 5 }
+
+ hh3cDot3OmpEmulationOltPonCastLLID OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "frames"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A count of frames received that contain a valid SLD
+ field in an OLT, as defined in [802.3ah] 65.1.3.3.1,
+ passes the CRC-8 check, as defined in [802.3ah]
+ 65.1.3.3.3, and the frame meets the rule for acceptance
+ defined in [802.3ah] 65.1.3.3.2."
+ REFERENCE "[802.3ah], 30.3.7.1.7."
+ ::= { hh3cDot3OmpEmulationStatEntry 6 }
+
+ hh3cDot3OmpEmulationBroadcastLLIDNotOnuID OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "frames"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A count of frames received that contain a valid SLD
+ field in a OLT, as defined in [802.3ah] clause
+ 65.1.3.3.1, and pass the CRC-8 check, as defined in
+ [802.3ah] clause 65.1.3.3.3, and contain broadcast LLID
+ as defined in [802.3ah] clause 65.
+ This attribute is mandatory for an OLT and for an ONU."
+ ::= { hh3cDot3OmpEmulationStatEntry 7 }
+
+ hh3cDot3OmpEmulationOnuLLIDNotBroadcast OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "frames"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A count of frames received that contain a valid SLD
+ field in a OLT, as defined in [802.3ah] clause
+ 65.1.3.3.1, and pass the CRC-8 check, as defined in
+ [802.3ah] clause 65.1.3.3.3, and contain the ONU's LLID
+ as defined in [802.3ah] clause 65. This attribute is
+ mandatory for an ONU and mandatory for an OLT (a
+ counter per LLID)."
+ ::= { hh3cDot3OmpEmulationStatEntry 8 }
+
+ hh3cDot3OmpEmulationBroadcastLLIDPlusOnuId OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "frames"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A count of frames received that contain a valid SLD
+ field in a OLT, as defined in [802.3ah] clause
+ 65.1.3.3.1, and pass the CRC-8 check, as defined in
+ [802.3ah] clause 65.1.3.3.3, and contain the broadcast
+ LLID plus ONU's LLID (frame reflected) as defined in
+ [802.3ah] clause 65. This attribute is mandatory for an
+ ONU and mandatory for an OLT (a counter per LLID)."
+ ::= { hh3cDot3OmpEmulationStatEntry 9 }
+
+ hh3cDot3OmpEmulationNotBroadcastLLIDNotOnuId OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "frames"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A count of frames received that contain a valid SLD
+ field in a OLT, as defined in [802.3ah] clause
+ 65.1.3.3.1, and pass the CRC-8 check, as defined in
+ [802.3ah] clause 65.1.3.3.3, and does not contain the
+ ONU's LLID as defined in [802.3ah] clause 65. This
+ attribute is mandatory for an ONU"
+ ::= { hh3cDot3OmpEmulationStatEntry 10 }
+
+
+ -- Conformance Statements
+
+ -- Conformance Groups
+
+ hh3cDot3OmpeGroups OBJECT IDENTIFIER ::= { hh3cDot3OmpeConformance 1 }
+
+
+ hh3cDot3OmpeGroupID OBJECT-GROUP
+ OBJECTS {
+ hh3cDot3OmpEmulationID,
+ hh3cDot3OmpEmulationType
+
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects of dot3 OMP emulation ID entity
+ state definition."
+ ::= { hh3cDot3OmpeGroups 1 }
+
+
+ hh3cDot3OmpeGroupStat OBJECT-GROUP
+ OBJECTS {
+ hh3cDot3OmpEmulationSLDErrors,
+ hh3cDot3OmpEmulationCRC8Errors,
+ hh3cDot3OmpEmulationBadLLID,
+ hh3cDot3OmpEmulationGoodLLID,
+ hh3cDot3OmpEmulationOnuPonCastLLID,
+ hh3cDot3OmpEmulationOltPonCastLLID,
+ hh3cDot3OmpEmulationBroadcastLLIDNotOnuID,
+ hh3cDot3OmpEmulationOnuLLIDNotBroadcast,
+ hh3cDot3OmpEmulationBroadcastLLIDPlusOnuId,
+ hh3cDot3OmpEmulationNotBroadcastLLIDNotOnuId
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects of dot3 OMP emulation
+ Statistics"
+ ::= { hh3cDot3OmpeGroups 2 }
+
+
+ -- Compliance
+
+ hh3cDot3OmpeCompliances OBJECT IDENTIFIER ::= { hh3cDot3OmpeConformance 2 }
+
+ hh3cDot3OmpeCompliance MODULE-COMPLIANCE
+ STATUS current
+ DESCRIPTION "The compliance statement for OMPEmulation
+ interfaces."
+ MODULE -- this module
+ MANDATORY-GROUPS { hh3cDot3OmpeGroupID }
+
+ GROUP hh3cDot3OmpeGroupStat
+ DESCRIPTION "This group is mandatory for all OMPemulation
+ supporting interfaces for Statistics collection."
+
+ ::= { hh3cDot3OmpeCompliances 1 }
+
+
+
+
+ -- Editor-s note: MAU managed object definitions (30.5.1)
+
+ hh3cDot3EponMauMIB OBJECT IDENTIFIER ::= { hh3cDot3EfmeponMIB 3 }
+
+ hh3cDot3EponMauObjects OBJECT IDENTIFIER ::= { hh3cDot3EponMauMIB 1 }
+
+ hh3cDot3EponMauConformance OBJECT IDENTIFIER ::= { hh3cDot3EponMauMIB 2 }
+
+ hh3cDot3EponMauTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF Hh3cDot3EponMauEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Table for dot3 MAU EPON MIB modules."
+ ::= { hh3cDot3EponMauObjects 1 }
+
+ hh3cDot3EponMauEntry OBJECT-TYPE
+ SYNTAX Hh3cDot3EponMauEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry in the dot3 MAU EPON MIB modules table."
+ INDEX { ifIndex }
+ ::= { hh3cDot3EponMauTable 1 }
+
+ Hh3cDot3EponMauEntry ::=
+ SEQUENCE {
+ hh3cDot3EponMauPCSCodingViolation Counter32,
+ hh3cDot3EponMauFecAbility INTEGER,
+ hh3cDot3EponMauFecMode INTEGER,
+ hh3cDot3EponMauFECCorrectedBlocks Counter32,
+ hh3cDot3EponMauFECUncorrectableBlocks Counter32,
+ hh3cDot3EponMauBufferHeadCodingViolation Counter32
+ }
+
+
+ hh3cDot3EponMauPCSCodingViolation OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "octets"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "For 100 Mb/ s operation it is a count of the number of
+ times an invalid code-group is received, other than the
+ /H/ code-group. For 1000 Mb/ s operation it is a count
+ of the number of times an invalid codegroup is received,
+ other than the /V/ code-group."
+ REFERENCE "[802.3ah], 30.5.1.1.12."
+ ::= { hh3cDot3EponMauEntry 1 }
+
+ hh3cDot3EponMauFecAbility OBJECT-TYPE
+ SYNTAX INTEGER {
+ unknown (1),
+ nonsupported (2),
+ supported (3)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A read-only value that indicates the support of
+ operation of the 1000BASE-PX PHY optional FEC Sublayer
+ for Forward error correction see [802.3ah] clause 65.2).
+ unknown(1) value is assigned in initializing, for non
+ FEC support state or type not yet known. nonsupported(2)
+ value is assigned when Sublayer is not support.
+ supported(3) value is assigned when Sublayer is
+ supported."
+ REFERENCE "[802.3ah], 30.5.1.1.13."
+ ::= { hh3cDot3EponMauEntry 2 }
+
+ hh3cDot3EponMauFecMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ unknown (1),
+ disabled (2),
+ enabled (3)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "A read-write value that indicates the mode of operation
+ of the 1000BASE-PX PHY optional FEC Sublayer for Forward
+ error correction see [802.3ah] clause 65.2).
+ A GET operation returns the current mode of operation
+ the PHY. A SET operation changes the mode of operation
+ of the PHY to the indicated value. unknown(1) value is
+ assigned in initializing, for non FEC support state or
+ type not yet known. disabled(2) value is assigned when
+ Sublayer operating in disabled mode. enabled(3) value is
+ assigned when Sublayer operating in FEC mode. writing
+ can be done all the time."
+ REFERENCE "[802.3ah], 30.5.1.1.14."
+ DEFVAL { 1 }
+ ::= { hh3cDot3EponMauEntry 3 }
+
+ hh3cDot3EponMauFECCorrectedBlocks OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "For 10PASS-TS, 2BASE-TL and 1000BASE-PX PHYs, a count
+ of corrected FEC blocks. This counter will not increment
+ for other PHY Types. Increment the counter by one for
+ each received block that is corrected by the FEC
+ function in the PHY."
+ REFERENCE "[802.3ah], 30.5.1.1.15."
+ ::= { hh3cDot3EponMauEntry 4 }
+
+ hh3cDot3EponMauFECUncorrectableBlocks OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "For 10PASS-TS, 2BASE-TL and 1000BASE-PX PHYs, a count of
+ uncorrectable FEC blocks. This counter will not
+ increment for other PHY Types. Increment the counter by
+ one for each FEC block that is determined to be
+ uncorrectable by the FEC function in the PHY."
+ REFERENCE "[802.3ah], 30.5.1.1.16."
+ ::= { hh3cDot3EponMauEntry 5 }
+
+ hh3cDot3EponMauBufferHeadCodingViolation OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "octets"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "For 1000 Mbps operation it is a counts of the number of
+ invalid code-group received directly from the link."
+ ::= { hh3cDot3EponMauEntry 6 }
+
+
+
+ -- Defining EPON MAU types
+ -- Editor's Note: This section should be added to 802.3 MAU MIB
+ -- module RFC. Preference would be that the MAU MIB module
+ -- structure would change so that it is re-written as an
+ -- IANA-maintained module.
+
+ hh3cDot3EponMauType OBJECT IDENTIFIER ::= { hh3cDot3EponMauMIB 3 }
+
+ hh3cEponMauType1000BasePXOLT OBJECT-IDENTITY
+ STATUS current
+ DESCRIPTION "Multipoint MAC Control (per 802.3 section 64,65) OLT
+ (master), unknown PMD"
+ REFERENCE "[802.3ah], 30.5.1.1.2."
+ ::= { hh3cDot3EponMauType 1 }
+
+ hh3cEponMauType1000BasePXONU OBJECT-IDENTITY
+ STATUS current
+ DESCRIPTION "Multipoint MAC Control (per 802.3 section 64,65),ONU
+ (slave), unknown PMD"
+ REFERENCE "[802.3ah], 30.5.1.1.2."
+ ::= { hh3cDot3EponMauType 2 }
+
+ hh3cEponMauType1000BasePX10DOLT OBJECT-IDENTITY
+ STATUS current
+ DESCRIPTION "EPON over 10K link, downlink (per 802.3 section 60),
+ OLT side"
+ REFERENCE "[802.3ah], 30.5.1.1.2."
+ ::= { hh3cDot3EponMauType 3 }
+
+ hh3cEponMauType1000BasePX10DONU OBJECT-IDENTITY
+ STATUS current
+ DESCRIPTION "EPON over 10K link, downlink (per 802.3 section 60),
+ ONU side"
+ REFERENCE "[802.3ah], 30.5.1.1.2."
+ ::= { hh3cDot3EponMauType 4 }
+
+ hh3cEponMauType1000BasePX10UOLT OBJECT-IDENTITY
+ STATUS current
+ DESCRIPTION "EPON over 10K link, uplink (per 802.3 section 60),
+ OLT side"
+ REFERENCE "[802.3ah], 30.5.1.1.2."
+ ::= { hh3cDot3EponMauType 5 }
+
+ hh3cEponMauType1000BasePX10UONU OBJECT-IDENTITY
+ STATUS current
+ DESCRIPTION "EPON over 10K link, uplink (per 802.3 section 60),
+ ONU side"
+ REFERENCE "[802.3ah], 30.5.1.1.2."
+ ::= { hh3cDot3EponMauType 6 }
+
+
+ hh3cEponMauType1000BasePX20DOLT OBJECT-IDENTITY
+ STATUS current
+ DESCRIPTION "EPON over 20K link, downlink (per 802.3 section 60),
+ OLT side"
+ REFERENCE "[802.3ah], 30.5.1.1.2."
+ ::= { hh3cDot3EponMauType 7 }
+
+ hh3cEponMauType1000BasePX20DONU OBJECT-IDENTITY
+ STATUS current
+ DESCRIPTION "EPON over 20K link, downlink (per 802.3 section 60),
+ ONU side"
+ REFERENCE "[802.3ah], 30.5.1.1.2."
+ ::= { hh3cDot3EponMauType 8 }
+
+ hh3cEponMauType1000BasePX20UOLT OBJECT-IDENTITY
+ STATUS current
+ DESCRIPTION "EPON over 20K link, uplink (per 802.3 section 60),
+ OLT side"
+ REFERENCE "[802.3ah], 30.5.1.1.2."
+ ::= { hh3cDot3EponMauType 9 }
+
+ hh3cEponMauType1000BasePX20UONU OBJECT-IDENTITY
+ STATUS current
+ DESCRIPTION "EPON over 20K link, uplink (per 802.3 section 60),
+ ONU side"
+ REFERENCE "[802.3ah], 30.5.1.1.2."
+ ::= { hh3cDot3EponMauType 10 }
+
+
+ -- Conformance Statements
+
+ -- Conformance Groups
+
+ hh3cDot3EponMauGroups OBJECT IDENTIFIER ::= { hh3cDot3EponMauConformance 1 }
+
+ hh3cDot3EponMauGroupAll OBJECT-GROUP
+ OBJECTS {
+ hh3cDot3EponMauPCSCodingViolation
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects of dot3 MAU definition."
+ ::= { hh3cDot3EponMauGroups 1 }
+
+ hh3cDot3EponMauGroupFEC OBJECT-GROUP
+ OBJECTS {
+ hh3cDot3EponMauFecAbility,
+ hh3cDot3EponMauFecMode,
+ hh3cDot3EponMauFECCorrectedBlocks,
+ hh3cDot3EponMauFECUncorrectableBlocks,
+ hh3cDot3EponMauBufferHeadCodingViolation
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects of FEC group definition."
+ ::= { hh3cDot3EponMauGroups 2 }
+
+
+ -- Compliance
+
+ hh3cDot3EponMauCompliances OBJECT IDENTIFIER ::= { hh3cDot3EponMauConformance 2 }
+
+ hh3cDot3EponMauCompliance MODULE-COMPLIANCE
+ STATUS current
+ DESCRIPTION "The compliance statement for MAU EPON interfaces."
+
+ MODULE -- this module
+ MANDATORY-GROUPS { hh3cDot3EponMauGroupAll }
+
+ GROUP hh3cDot3EponMauGroupFEC
+ DESCRIPTION "This group is mandatory for all EPON MAU devices
+ Supporting FEC functionality as for Definitions and
+ BER Statistics collection."
+
+ ::= { hh3cDot3EponMauCompliances 1 }
+
+
+ END
generated by cgit v1.2.3 (git 2.46.0) at 2026-02-26 10:05:53 +0000