diff options
Diffstat (limited to 'MIBS/comware/HH3C-DOT11-RRM-MIB')
| -rw-r--r-- | MIBS/comware/HH3C-DOT11-RRM-MIB | 1439 |
1 files changed, 1439 insertions, 0 deletions
diff --git a/MIBS/comware/HH3C-DOT11-RRM-MIB b/MIBS/comware/HH3C-DOT11-RRM-MIB new file mode 100644 index 0000000..e7645c0 --- /dev/null +++ b/MIBS/comware/HH3C-DOT11-RRM-MIB @@ -0,0 +1,1439 @@ +-- ========================================================================== +-- Copyright (c) 2004-2017 New H3C Tech. Co., Ltd. All rights reserved. +-- +-- Description: The purpose of this MIB file is to provide object definition +-- of WLAN radio resource management (RRM). +-- Reference: +-- Version: V1.9 +-- History: +-- V1.0 2008-07-16 Initial version, created by ChenWei +-- V1.1 2009-04-16 modified by WangChunsheng +-- Add new table of hh3cDot11MonitorDetectedDevTable for hh3cDot11MonitorDetectedGroup. +-- Add new table of hh3cDot11RRMAPCfgTable for hh3cDot11RRMConfigGroup. +-- V1.2 2009-05-07 modified by Wang Shaojie, wangchunsheng +-- Add hh3cDot11APInterfNumThreshhd, hh3cDot11StaInterfNumThreshhd +-- to hh3cDot11GlobeConfigGroup. +-- Modify hh3cDot11RRMCfgIntrvl +-- V1.3 2009-05-07 modified by Wang Shaojie +-- Add new node hh3cDot11MonitorDevSNR to hh3cDot11MonitorDetectedDevTable +-- V1.4 2010-02-22 modified by Wang Chunsheng +-- Add new table hh3cDot11RRMSDRadioGroupTable to hh3cDot11RRMConfigGroup +-- 2010-03-18 Modified by Wang Lu +-- Add hh3cDot11RRMAPCfg2Table +-- V1.5 2010-09-21 Modified by wu xiaopeng +-- Add new node hh3cDot11RRMCoChlIntfTrapThhd, hh3cDot11RRMAdjChlIntfTrapThhd +-- to hh3cDot11RRMAPCfg2Table +-- 2011-03-23 Modified by NiuJian +-- Add new node hh3cDot11RrmNbrSSID +-- to hh3cDot11RRMNbrInfoTable +-- V1.6 2013-03-23 Modified by GaoFei +-- Change SYNTAX of hh3cDot11RRMCfgPERThres,hh3cDot11RRMCfgToleranceFctr +-- V1.7 2013-09-02 Modified by Zhang Siyu +-- Add new table hh3cDot11RRMRadioNbrInfoTable to hh3cDot11RRMDetectGroup +-- 2013-11-19 Modified by wubin +-- Add new node hh3cDot11RRM11nMultiCastMcs +-- to hh3cDot11RRMGlobalCfgPara +-- 2013-12-21 Modified by wubin +-- Add new node hh3cDot11RRM11acMadtMaxNss, hh3cDot11RRM11acSuptMaxNss, +-- hh3cDot11RRM11acMultiCastNss, hh3cDot11RRM11acMultiCastVhtMcs +-- to hh3cDot11RRMGlobalCfgPara +-- V1.8 2014-05-07 Modified by yubo +-- Change SYNTAX of hh3cDot11RRMCfgIntrfThres. +-- V1.9 2017-05-22 Modified by weizhiguang +-- Add new node hh3cDot11RrmNbrSNR, hh3cDot11RrmNbrNF +-- to Hh3cDot11RRMNbrInfoEntry +-- ========================================================================== +HH3C-DOT11-RRM-MIB DEFINITIONS ::= BEGIN + +IMPORTS + Hh3cDot11RadioType, Hh3cDot11ChannelScopeType, Hh3cDot11RadioElementIndex, + Hh3cDot11RadioScopeType, hh3cDot11APElementIndex + FROM HH3C-DOT11-REF-MIB + Integer32, Unsigned32, OBJECT-TYPE, MODULE-IDENTITY, + NOTIFICATION-TYPE + FROM SNMPv2-SMI + TruthValue, MacAddress, DateAndTime, RowStatus + FROM SNMPv2-TC + hh3cDot11, + Hh3cDot11ObjectIDType, + Hh3cDot11SSIDStringType + FROM HH3C-DOT11-REF-MIB; + +hh3cDot11RRM MODULE-IDENTITY + LAST-UPDATED "201705221600Z" -- May 22, 2017 at 16:00 GMT + ORGANIZATION + "New H3C Technologies Co., Ltd." + CONTACT-INFO + "Platform Team New H3C Technologies Co., Ltd. + Hai-Dian District Beijing P.R.China + Http://www.h3c.com + Zip: 100085" + DESCRIPTION + "This MIB file is to provide the object definition of + WLAN radio resource management (RRM)." + + REVISION "201705221600Z" -- May 22, 2017 at 16:00 GMT + DESCRIPTION + "Modified to add new nodes." + REVISION "201009251800Z" -- Sep 25, 2010 at 18:00 GMT + DESCRIPTION + "Modified to add new nodes." + REVISION "201002231800Z" -- Feb 23, 2010 at 18:00 GMT + DESCRIPTION + "Modified to add new nodes." + REVISION "200908012000Z" -- Aug 1, 2009 at 20:00 GMT + DESCRIPTION + "Modified to add new nodes and new table." + REVISION "200905072000Z" -- May 7, 2009 at 20:00 GMT + DESCRIPTION + "Modified to add new nodes and new table." + REVISION "200904172000Z" -- April 17, 2009 at 20:00 GMT + DESCRIPTION + "Modified to add new table and new group." + REVISION "200807141429Z" + DESCRIPTION + "The initial revision of this MIB module." + ::= { hh3cDot11 8 } + +-- +-- Node definitions +-- + +hh3cDot11RRMConfigGroup OBJECT IDENTIFIER ::= { hh3cDot11RRM 1 } + +hh3cDot11RRMGlobalCfgPara OBJECT IDENTIFIER ::= { hh3cDot11RRMConfigGroup 1 } + +hh3cDot11RRM11nMadtMaxMcs OBJECT-TYPE + SYNTAX Integer32 (0..76 | 255) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Specify the maximum modulation and coding scheme (MCS) index for + 802.11n mandatory rates. + The value 255 indicates that no maximum MCS index + is specified. No maximum MCS index is specified for 802.11n + mandatory rates by default. + Besides 255, the specified maximum MCS index for 802.11n supported + rates must be no less than the specified maximum MCS index for 802.11n + mandatory rates." + DEFVAL { 255 } + ::= { hh3cDot11RRMGlobalCfgPara 1 } + +hh3cDot11RRM11nSuptMaxMcs OBJECT-TYPE + SYNTAX Integer32 (0..76) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Specify the maximum Modulation and Coding Scheme (MCS) index for + 802.11n supported rates. + The specified maximum MCS index for 802.11n supported rates must be no + less than the specified maximum MCS index for 802.11n mandatory rates." + DEFVAL { 76 } + ::= { hh3cDot11RRMGlobalCfgPara 2 } + +hh3cDot11RRM11gProtect OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enable/Disable dot11g protection." + DEFVAL { false } + ::= { hh3cDot11RRMGlobalCfgPara 3 } + +hh3cDot11RRM11aPwrConstrt OBJECT-TYPE + SYNTAX Integer32 + UNITS "dBm" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Configure the power constraint for all 802.11a radios. + The configured power constraint is advertised in beacons if spectrum + management is enabled. + The range of power constraint is 0 to MAX-POWER-1 (where the MAX-POWER + is defined by the regulatory domain)." + DEFVAL { 0 } + ::= { hh3cDot11RRMGlobalCfgPara 4 } + +hh3cDot11RRM11aSpectrumManag OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enable/Disable spectrum management for 802.11a radios. + When spectrum management is enabled, the WLAN sub-system advertises + power capabilities of the AP and power constraints applicable to all + devices in the BSS based on regulatory domain specification." + DEFVAL { false } + ::= { hh3cDot11RRMGlobalCfgPara 5 } + +hh3cDot11RRMAutoChlAvoid11h OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Configure the auto-channel set as non-dot11h channels, this is, + only the non-dot11h channels belonging to the country code are scanned + during initial channel selection and one of them is selected." + DEFVAL { false } + ::= { hh3cDot11RRMGlobalCfgPara 6 } + +hh3cDot11RRMScanChl OBJECT-TYPE + SYNTAX INTEGER + { + auto(1), + all(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Set the scan mode. + auto: When this option is set, all channels of the country code being + set are scanned. + all: When this option is set, all the channels of the radio band are + scanned." + DEFVAL { auto } + ::= { hh3cDot11RRMGlobalCfgPara 7 } + +hh3cDot11RRMScanRptIntvel OBJECT-TYPE + SYNTAX Integer32 (5..120) + UNITS "second" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Set the scan report interval." + DEFVAL { 10 } + ::= { hh3cDot11RRMGlobalCfgPara 8 } + +hh3cDot11APInterfNumThreshhd OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Represents threshold of AP interference . + If the value of AP interference exceeds this threshold, + AP interference trap will be sent. If the value of this node + is zero, AP interference trap will be sent immediately." + + DEFVAL { 0 } + ::= { hh3cDot11RRMGlobalCfgPara 9 } + +hh3cDot11StaInterfNumThreshhd OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Represents threshold of STA interference. + If the value of STA interference exceeds this threshold, + STA interference trap will be sent. If the value of this + node is zero, STA interference trap will be sent immediately. + " + DEFVAL { 0 } + ::= { hh3cDot11RRMGlobalCfgPara 10 } + +hh3cDot11RRM11nMultiCastMcs OBJECT-TYPE + SYNTAX Unsigned32 (0..76 | 4294967295) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Specify the modulation and coding scheme (MCS) index for 802.11n + multicast rates. + The value 4294967295 indicates that no MCS index is specified. + No MCS index is specified for 802.11n multicast rates by default. + Besides 4294967295, the specified MCS index for 802.11n multicast + rates must be no less than the specified maximum MCS index for 802.11n + mandatory rates. + Before configure the MCS index for 802.11n multicast rates, the maximum + MCS index for 802.11n mandatory rates must be configured" + DEFVAL { 4294967295 } + ::= { hh3cDot11RRMGlobalCfgPara 11 } + +hh3cDot11RRM11acMadtMaxNss OBJECT-TYPE + SYNTAX Integer32 (0..8) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Specify the maximum NSS index for 802.11ac mandatory rates. + The value 0 indicates that no maximum NSS index is specified. + No maximum NSS index is specified for 802.11ac mandatory rates by default. + The specified maximum NSS index for 802.11ac supported rates must be no less + than the specified maximum NSS index for 802.11ac mandatory rates." + DEFVAL { 0 } + ::= { hh3cDot11RRMGlobalCfgPara 12 } + +hh3cDot11RRM11acSuptMaxNss OBJECT-TYPE + SYNTAX Integer32 (1..8) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Specify the maximum NSS index for 802.11ac supported rates. + The specified maximum NSS index for 802.11ac supported rates must be no + less than the specified maximum NSS index for 802.11ac mandatory rates." + DEFVAL { 8 } + ::= { hh3cDot11RRMGlobalCfgPara 13 } + +hh3cDot11RRM11acMultiCastNss OBJECT-TYPE + SYNTAX Integer32 (0..8) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Specify the NSS index for 802.11ac multicast rates. + The value 0 indicates that no NSS index is specified. + No NSS index is specified for 802.11ac multicast rates by default. + The specified NSS index for 802.11ac multicast rates must be no less + than the specified maximum NSS index for 802.11ac mandatory rates. + Before configuring the NSS index for 802.11ac multicast rates, the maximum + NSS index for 802.11ac mandatory rates must be configured. + Besides, it must be configured together with the node below." + DEFVAL { 0 } + ::= { hh3cDot11RRMGlobalCfgPara 14 } + +hh3cDot11RRM11acMultiCastVhtMcs OBJECT-TYPE + SYNTAX Integer32 (0..9 | 255) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Specify the MCS index for 802.11ac multicast rates. + The value 255 indicates that no MCS index is specified. + No MCS index is specified for 802.11ac multicast rates by default. + Besides, it must be configured together with the node above." + DEFVAL { 255 } + ::= { hh3cDot11RRMGlobalCfgPara 15 } + +hh3cDot11RRMRadioCfgTable OBJECT-TYPE + SYNTAX SEQUENCE OF Hh3cDot11RRMRadioCfgEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Configure WLAN RRM based radio type. + When 802.11b parameter is modified, 802.11g parameter will be + changed at the same time. + In the same way, when 802.11g parameter is modified, 802.11b parameter + will be changed at the same time." + ::= { hh3cDot11RRMConfigGroup 2 } + +hh3cDot11RRMRadioCfgEntry OBJECT-TYPE + SYNTAX Hh3cDot11RRMRadioCfgEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Configure WLAN RRM based radio type. + When 802.11b parameter is modified, 802.11g parameter will be + changed at the same time. + In the same way, when 802.11g parameter is modified, 802.11b parameter + will be changed at the same time." + INDEX { hh3cDot11RRMRadioType } + ::= { hh3cDot11RRMRadioCfgTable 1 } + +Hh3cDot11RRMRadioCfgEntry ::= + SEQUENCE { + hh3cDot11RRMRadioType + Hh3cDot11RadioType, + hh3cDot11RRMCfgChlState + TruthValue, + hh3cDot11RRMCfgChlMode + INTEGER, + hh3cDot11RRMChlProntoRadioElmt + Unsigned32, + hh3cDot11RRMCfgPwrState + TruthValue, + hh3cDot11RRMCfgPwrMode + INTEGER, + hh3cDot11RRMPwrProntoRadioElmt + Unsigned32, + hh3cDot11RRMCfgIntrvl + Integer32, + hh3cDot11RRMCfgIntrfThres + Integer32, + hh3cDot11RRMCfgNoiseThres + Integer32, + hh3cDot11RRMCfgPERThres + Integer32, + hh3cDot11RRMCfgToleranceFctr + Integer32, + hh3cDot11RRMCfgAdjacencyFctr + Integer32 + } + +hh3cDot11RRMRadioType OBJECT-TYPE + SYNTAX Hh3cDot11RadioType + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "802.11 radio type." + ::= { hh3cDot11RRMRadioCfgEntry 1 } + +hh3cDot11RRMCfgChlState OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enable/Disable dynamic channel selection." + DEFVAL { false } + ::= { hh3cDot11RRMRadioCfgEntry 2 } + +hh3cDot11RRMCfgChlMode OBJECT-TYPE + SYNTAX INTEGER + { + selfDecisive(1), + userTriggered(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Configure the mode of channel selection. + This node can be configured only when dynamic channel selection + is enabled." + DEFVAL { userTriggered } + ::= { hh3cDot11RRMRadioCfgEntry 3 } + +hh3cDot11RRMChlProntoRadioElmt OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Specify the AP and radio that will change channel at next + calibration cycle. + 0 is returned when getting the value of this node. + This node can be configured only when the mode of channel selection + control is user-triggered. + When configuring, the higher 24 bits stand for the AP index, + and the last 8 bits stand for the radio index. + 4294967295 stand for configuring each radio on all APs." + DEFVAL { 0 } + ::= { hh3cDot11RRMRadioCfgEntry 4 } + +hh3cDot11RRMCfgPwrState OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enable/Disable dynamic power selection for the band." + DEFVAL { false } + ::= { hh3cDot11RRMRadioCfgEntry 5 } + +hh3cDot11RRMCfgPwrMode OBJECT-TYPE + SYNTAX INTEGER + { + selfDecisive(1), + userTriggered(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Configure the mode of transmit power control. + This node can be configured only when dynamic power selection + is enabled." + DEFVAL { userTriggered } + ::= { hh3cDot11RRMRadioCfgEntry 6 } + +hh3cDot11RRMPwrProntoRadioElmt OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Specify the AP and radio that will change power at next + calibration cycle. + 0 is returned when getting the value of this node. + This node can be configured only when the mode of transmit power + control is user-triggered. + When configuring, the higher 24 bits stand for the AP index, + and the last 8 bits stand for the radio index. + 4294967295 stand for configuring each radio on all APs." + DEFVAL { 0 } + ::= { hh3cDot11RRMRadioCfgEntry 7 } + +hh3cDot11RRMCfgIntrvl OBJECT-TYPE + SYNTAX Integer32 + UNITS "minute" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Configure the calibration interval." + DEFVAL { 8 } + ::= { hh3cDot11RRMRadioCfgEntry 8 } + +hh3cDot11RRMCfgIntrfThres OBJECT-TYPE + SYNTAX Integer32 (1..100) + UNITS "percent" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Configure the interface threshold. + By default, interference observed on an operating channel is considered + during dynamic frequency selection and transmit power control. If the + interference percentage on the channel reaches the set threshold, RRM + will perform resource adjustment to control the situation." + DEFVAL { 50 } + ::= { hh3cDot11RRMRadioCfgEntry 9 } + +hh3cDot11RRMCfgNoiseThres OBJECT-TYPE + SYNTAX Integer32 (-127..127) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Configure the noise threshold." + DEFVAL { -70 } + ::= { hh3cDot11RRMRadioCfgEntry 10 } + +hh3cDot11RRMCfgPERThres OBJECT-TYPE + SYNTAX Integer32 (1..100) + UNITS "percent" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Configure the CRC error threshold. + If the percentage of CRC errors reaches the threshold, RRM will perform + resource adjustment to control the situation." + DEFVAL { 20 } + ::= { hh3cDot11RRMRadioCfgEntry 11 } + +hh3cDot11RRMCfgToleranceFctr OBJECT-TYPE + SYNTAX Integer32 (1..45) + UNITS "percent" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Configure the tolerance level. + During dynamic frequency selection (DFS), the channel will be changed + only if there is a better channel having lesser interference and packet + error rate than those specified by the user." + DEFVAL { 20 } + ::= { hh3cDot11RRMRadioCfgEntry 12 } + +hh3cDot11RRMCfgAdjacencyFctr OBJECT-TYPE + SYNTAX Integer32 (1..16) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Configure the adjacency factor for the band. + If transmit power control (TPC) is configured, power will be adjusted + when the nth neighbor is detected. The value n is the adjacency factor." + DEFVAL { 3 } + ::= { hh3cDot11RRMRadioCfgEntry 13 } + +hh3cDot11RRMAPCfgTable OBJECT-TYPE + SYNTAX SEQUENCE OF Hh3cDot11RRMAPCfgEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table defines the RRM parameters for AP." + ::= { hh3cDot11RRMConfigGroup 3 } + +hh3cDot11RRMAPCfgEntry OBJECT-TYPE + SYNTAX Hh3cDot11RRMAPCfgEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Each entry contains information of RRM parameters for AP." + INDEX { hh3cDot11APElementIndex } + ::= { hh3cDot11RRMAPCfgTable 1 } + +Hh3cDot11RRMAPCfgEntry ::= + SEQUENCE { + hh3cDot11RRMAPWorkMode + INTEGER + } + +hh3cDot11RRMAPWorkMode OBJECT-TYPE + SYNTAX INTEGER + { + normal(1), + monitor(2), + hybrid(3) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "AP work mode." + ::= { hh3cDot11RRMAPCfgEntry 1 } + +hh3cDot11RRMSDRadioGroupTable OBJECT-TYPE + SYNTAX SEQUENCE OF Hh3cDot11RRMSDRadioGroupEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table defines RRM self-decisive radio group." + ::= { hh3cDot11RRMConfigGroup 4 } + +hh3cDot11RRMSDRadioGroupEntry OBJECT-TYPE + SYNTAX Hh3cDot11RRMSDRadioGroupEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Each entry contains information of one RRM self-decisive radio group." + INDEX + { + hh3cDot11RRMSDRadioGroupId + } + ::= { hh3cDot11RRMSDRadioGroupTable 1 } + +Hh3cDot11RRMSDRadioGroupEntry ::= SEQUENCE + { + hh3cDot11RRMSDRadioGroupId Unsigned32, + hh3cDot11RRMSDRadioGroupDesc OCTET STRING, + hh3cDot11RRMSDRdGrpChlHolddownTm Unsigned32, + hh3cDot11RRMSDRdGrpPwrHolddownTm Unsigned32, + hh3cDot11RRMSDRdGroupRowStatus RowStatus + } + +hh3cDot11RRMSDRadioGroupId OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Represents RRM self-decisive radio group ID." + ::= { hh3cDot11RRMSDRadioGroupEntry 1 } + +hh3cDot11RRMSDRadioGroupDesc OBJECT-TYPE + SYNTAX OCTET STRING + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Represents the description of RRM self-decisive radio group." + ::= { hh3cDot11RRMSDRadioGroupEntry 2 } + +hh3cDot11RRMSDRdGrpChlHolddownTm OBJECT-TYPE + SYNTAX Unsigned32 + UNITS "minute" + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Represents the channel holddown time of RRM self-decisive radio group." + ::= { hh3cDot11RRMSDRadioGroupEntry 3 } + +hh3cDot11RRMSDRdGrpPwrHolddownTm OBJECT-TYPE + SYNTAX Unsigned32 + UNITS "minute" + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Represents the power holddown time of RRM self-decisive radio group." + ::= { hh3cDot11RRMSDRadioGroupEntry 4 } + +hh3cDot11RRMSDRdGroupRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The row status of this table entry." + ::= { hh3cDot11RRMSDRadioGroupEntry 5 } + +hh3cDot11RRMAPCfg2Table OBJECT-TYPE + SYNTAX SEQUENCE OF Hh3cDot11RRMAPCfg2Entry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table defines the RRM parameters for AP." + ::= { hh3cDot11RRMConfigGroup 5 } + +hh3cDot11RRMAPCfg2Entry OBJECT-TYPE + SYNTAX Hh3cDot11RRMAPCfg2Entry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Each entry contains information of RRM parameters for AP." + INDEX { hh3cDot11RRMAPSerialID } + ::= { hh3cDot11RRMAPCfg2Table 1 } + +Hh3cDot11RRMAPCfg2Entry ::= + SEQUENCE { + hh3cDot11RRMAPSerialID + Hh3cDot11ObjectIDType, + hh3cDot11RRMAPIntfThreshold + Integer32, + hh3cDot11RRMStaIntfThreshold + Integer32, + hh3cDot11RRMCoChlIntfTrapThhd + Integer32, + hh3cDot11RRMAdjChlIntfTrapThhd + Integer32 + } + +hh3cDot11RRMAPSerialID OBJECT-TYPE + SYNTAX Hh3cDot11ObjectIDType + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Serial ID of the AP." + ::= { hh3cDot11RRMAPCfg2Entry 1 } + +hh3cDot11RRMAPIntfThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Represents threshold of AP interference . + If the number of AP interference exceeds this threshold, + AP interference trap will be sent." + ::= { hh3cDot11RRMAPCfg2Entry 2 } + +hh3cDot11RRMStaIntfThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Represents threshold of STA interference. + If the number of STA interference exceeds this threshold, + station interference trap will be sent." + ::= { hh3cDot11RRMAPCfg2Entry 3 } + +hh3cDot11RRMCoChlIntfTrapThhd OBJECT-TYPE + SYNTAX Integer32 + UNITS "dbm" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Represents threshold of interference trap with current ap. + If signal strength of the device exceeds this threshold, + corresponding trap will be sent." + ::= { hh3cDot11RRMAPCfg2Entry 4 } + + +hh3cDot11RRMAdjChlIntfTrapThhd OBJECT-TYPE + SYNTAX Integer32 + UNITS "dbm" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Represents threshold of adjacent interference trap with current ap. + If signal strength of the device exceeds this threshold, + corresponding trap will be sent." + ::= { hh3cDot11RRMAPCfg2Entry 5 } + +hh3cDot11RRMDetectGroup OBJECT IDENTIFIER ::= { hh3cDot11RRM 2 } + +hh3cDot11RRMChlRptTable OBJECT-TYPE + SYNTAX SEQUENCE OF Hh3cDot11RRMChlRptEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table shows the RRM channel information of each radio + on all APs." + ::= { hh3cDot11RRMDetectGroup 1 } + +hh3cDot11RRMChlRptEntry OBJECT-TYPE + SYNTAX Hh3cDot11RRMChlRptEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Each entry contains information of RRM channel information + of the radio on the AP." + INDEX { hh3cDot11RRMRadioIndex, hh3cDot11RRMChlRptChlNum } + ::= { hh3cDot11RRMChlRptTable 1 } + +Hh3cDot11RRMChlRptEntry ::= + SEQUENCE { + hh3cDot11RRMRadioIndex + Hh3cDot11RadioElementIndex, + hh3cDot11RRMChlRptChlNum + Integer32, + hh3cDot11RRMChlRptChlType + INTEGER, + hh3cDot11RRMChlRptChlQlty + INTEGER, + hh3cDot11RRMChlRptNbrCnt + Integer32, + hh3cDot11RRMChlRptLoad + Integer32, + hh3cDot11RRMChlRptUtlz + Integer32, + hh3cDot11RRMChlRptIntrf + Integer32, + hh3cDot11RRMChlRptPER + Integer32, + hh3cDot11RRMChlRptRetryRate + Integer32, + hh3cDot11RRMChlRptNoise + Integer32, + hh3cDot11RRMChlRptRadarIndtcr + INTEGER + } + +hh3cDot11RRMRadioIndex OBJECT-TYPE + SYNTAX Hh3cDot11RadioElementIndex + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "Represents index of the radio." + ::= { hh3cDot11RRMChlRptEntry 1 } + +hh3cDot11RRMChlRptChlNum OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "Channel number." + ::= { hh3cDot11RRMChlRptEntry 2 } + +hh3cDot11RRMChlRptChlType OBJECT-TYPE + SYNTAX INTEGER + { + primeChannel(1), + offChannel(2) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Channel type." + ::= { hh3cDot11RRMChlRptEntry 3 } + +hh3cDot11RRMChlRptChlQlty OBJECT-TYPE + SYNTAX INTEGER + { + good(1), + bad(2) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Channel quality." + ::= { hh3cDot11RRMChlRptEntry 4 } + +hh3cDot11RRMChlRptNbrCnt OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of neighbors found on the channel." + ::= { hh3cDot11RRMChlRptEntry 5 } + +hh3cDot11RRMChlRptLoad OBJECT-TYPE + SYNTAX Integer32 (0..100) + UNITS "percent" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Load observed on the channel in percentage." + ::= { hh3cDot11RRMChlRptEntry 6 } + +hh3cDot11RRMChlRptUtlz OBJECT-TYPE + SYNTAX Integer32 (0..100) + UNITS "percent" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Utilization of the channel in percentage." + ::= { hh3cDot11RRMChlRptEntry 7 } + +hh3cDot11RRMChlRptIntrf OBJECT-TYPE + SYNTAX Integer32 (0..100) + UNITS "percent" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Interference observed on the channel in percentage." + ::= { hh3cDot11RRMChlRptEntry 8 } + +hh3cDot11RRMChlRptPER OBJECT-TYPE + SYNTAX Integer32 (0..100) + UNITS "percent" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Packet error rate observed on the channel in percentage." + ::= { hh3cDot11RRMChlRptEntry 9 } + +hh3cDot11RRMChlRptRetryRate OBJECT-TYPE + SYNTAX Integer32 (0..100) + UNITS "percent" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Percentage of retransmission happened on the channel." + ::= { hh3cDot11RRMChlRptEntry 10 } + +hh3cDot11RRMChlRptNoise OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Noise observed on the channel." + ::= { hh3cDot11RRMChlRptEntry 11 } + +hh3cDot11RRMChlRptRadarIndtcr OBJECT-TYPE + SYNTAX INTEGER + { + detected(1), + notDetected(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Radar detection status." + ::= { hh3cDot11RRMChlRptEntry 12 } + +hh3cDot11RRMNbrInfoTable OBJECT-TYPE + SYNTAX SEQUENCE OF Hh3cDot11RRMNbrInfoEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table shows the RRM neighbor information of each radio + on all APs." + ::= { hh3cDot11RRMDetectGroup 2 } + +hh3cDot11RRMNbrInfoEntry OBJECT-TYPE + SYNTAX Hh3cDot11RRMNbrInfoEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Each entry contains information of RRM neighbor information + of the radio on an AP." + INDEX { hh3cDot11RRMRadioIndex, hh3cDot11RrmNbrBSSID } + ::= { hh3cDot11RRMNbrInfoTable 1 } + +Hh3cDot11RRMNbrInfoEntry ::= + SEQUENCE { + hh3cDot11RrmNbrBSSID + MacAddress, + hh3cDot11RrmNbrChl + Hh3cDot11ChannelScopeType, + hh3cDot11RRMNbrIntrf + Integer32, + hh3cDot11RrmNbrRSSI + Integer32, + hh3cDot11RrmNbrType + INTEGER, + hh3cDot11RrmNbrSSID + Hh3cDot11SSIDStringType, + hh3cDot11RrmNbrSNR + Integer32, + hh3cDot11RrmNbrNF + Integer32 + } + +hh3cDot11RrmNbrBSSID OBJECT-TYPE + SYNTAX MacAddress + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "MAC address of the AP." + ::= { hh3cDot11RRMNbrInfoEntry 1 } + +hh3cDot11RrmNbrChl OBJECT-TYPE + SYNTAX Hh3cDot11ChannelScopeType + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Channel number on which the neighbor was found." + ::= { hh3cDot11RRMNbrInfoEntry 2 } + +hh3cDot11RRMNbrIntrf OBJECT-TYPE + SYNTAX Integer32 (0..100) + UNITS "percent" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Interference observed on the channel in percentage by neighbor." + ::= { hh3cDot11RRMNbrInfoEntry 3 } + +hh3cDot11RrmNbrRSSI OBJECT-TYPE + SYNTAX Integer32 + UNITS "dBm" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Signal strength of the AP in dBm." + ::= { hh3cDot11RRMNbrInfoEntry 4 } + +hh3cDot11RrmNbrType OBJECT-TYPE + SYNTAX INTEGER + { + managed(1), + unmanaged(2) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Type of the AP, managed or unmanaged." + ::= { hh3cDot11RRMNbrInfoEntry 5 } + +hh3cDot11RrmNbrSSID OBJECT-TYPE + SYNTAX Hh3cDot11SSIDStringType + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "SSID of the Neighbor." + ::= { hh3cDot11RRMNbrInfoEntry 6 } + +hh3cDot11RrmNbrSNR OBJECT-TYPE + SYNTAX Integer32 + UNITS "dB" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Signal to noise ratio of the AP in dB." + ::= { hh3cDot11RRMNbrInfoEntry 7 } + +hh3cDot11RrmNbrNF OBJECT-TYPE + SYNTAX Integer32 + UNITS "dBm" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Noise floor of the AP in dBm." + ::= { hh3cDot11RRMNbrInfoEntry 8 } + +hh3cDot11RRMHistoryTable OBJECT-TYPE + SYNTAX SEQUENCE OF Hh3cDot11RRMHistoryEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table shows the details of the latest three channel changes + and power changes applied on all APs, including time of change, + reason of the change and the channel, power, interference parameters." + ::= { hh3cDot11RRMDetectGroup 3 } + +hh3cDot11RRMHistoryEntry OBJECT-TYPE + SYNTAX Hh3cDot11RRMHistoryEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Each entry shows the details of channel and power changes." + INDEX { hh3cDot11RRMRadioIndex, + hh3cDot11RRMHistoryId, + hh3cDot11RRMHistoryRecIndctr } + ::= { hh3cDot11RRMHistoryTable 1 } + +Hh3cDot11RRMHistoryEntry ::= + SEQUENCE { + hh3cDot11RRMHistoryId + Integer32, + hh3cDot11RRMHistoryRecIndctr + INTEGER, + hh3cDot11RRMHistoryChl + Hh3cDot11ChannelScopeType, + hh3cDot11RRMHistoryPwr + Integer32, + hh3cDot11RRMHistoryLoad + Integer32, + hh3cDot11RRMHistoryUtlz + Integer32, + hh3cDot11RRMHistoryIntrf + Integer32, + hh3cDot11RRMHistoryNoise + Integer32, + hh3cDot11RRMHistoryPER + Integer32, + hh3cDot11RRMHistoryRetryRate + Integer32, + hh3cDot11RRMHistoryChgReason + BITS, + hh3cDot11RRMHistoryChgDateTime + DateAndTime + } + +hh3cDot11RRMHistoryId OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "History number of the change." + ::= { hh3cDot11RRMHistoryEntry 1 } + +hh3cDot11RRMHistoryRecIndctr OBJECT-TYPE + SYNTAX INTEGER + { + before(1), + after(2) + } + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "History record type of the change." + ::= { hh3cDot11RRMHistoryEntry 2 } + +hh3cDot11RRMHistoryChl OBJECT-TYPE + SYNTAX Hh3cDot11ChannelScopeType + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Channel on which the radio operates before/after the change + of channel or power." + ::= { hh3cDot11RRMHistoryEntry 3 } + +hh3cDot11RRMHistoryPwr OBJECT-TYPE + SYNTAX Integer32 + UNITS "dBm" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Power of the radio before/after the change of channel or + power." + ::= { hh3cDot11RRMHistoryEntry 4 } + +hh3cDot11RRMHistoryLoad OBJECT-TYPE + SYNTAX Integer32 (0..100) + UNITS "percent" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Load observed on the radio in percentage before/after the + change of channel or power." + ::= { hh3cDot11RRMHistoryEntry 5 } + +hh3cDot11RRMHistoryUtlz OBJECT-TYPE + SYNTAX Integer32 (0..100) + UNITS "percent" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Utilization of the radio in percentage before/after the + change of channel or power." + ::= { hh3cDot11RRMHistoryEntry 6 } + +hh3cDot11RRMHistoryIntrf OBJECT-TYPE + SYNTAX Integer32 (0..100) + UNITS "percent" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Interference observed on the radio in percentage + before/after the change of channel or power." + ::= { hh3cDot11RRMHistoryEntry 7 } + +hh3cDot11RRMHistoryNoise OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Noise observed on the radio before/after the change + of channel or power." + ::= { hh3cDot11RRMHistoryEntry 8 } + +hh3cDot11RRMHistoryPER OBJECT-TYPE + SYNTAX Integer32 (0..100) + UNITS "percent" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Packet error rate observed on the radio in percentage + before/after the change of channel or power." + ::= { hh3cDot11RRMHistoryEntry 9 } + +hh3cDot11RRMHistoryRetryRate OBJECT-TYPE + SYNTAX Integer32 (0..100) + UNITS "percent" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Percentage of retransmission happened on the radio + before/after the change of channel or power." + ::= { hh3cDot11RRMHistoryEntry 10 } + +hh3cDot11RRMHistoryChgReason OBJECT-TYPE + SYNTAX BITS + { + others(0), + coverage(1), + radar(2), + retransmission(3), + packetsDiscarded(4), + interference(5) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Reason for the change of channel or power. + The various bit positions are: + |0 |Others | + |1 |Coverage | + |2 |Radar | + |3 |Retransmission | + |4 |Packets discarded | + |5 |Interference | + 0 is returned when the history record type is after." + ::= { hh3cDot11RRMHistoryEntry 11 } + +hh3cDot11RRMHistoryChgDateTime OBJECT-TYPE + SYNTAX DateAndTime + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The time when the channel or power change occurred." + ::= { hh3cDot11RRMHistoryEntry 12 } + +hh3cDot11RRMRadioNbrInfoTable OBJECT-TYPE + SYNTAX SEQUENCE OF Hh3cDot11RRMRadioNbrInfoEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table shows the RRM neighbor information of each radio + on all APs." + ::= { hh3cDot11RRMDetectGroup 4 } + +hh3cDot11RRMRadioNbrInfoEntry OBJECT-TYPE + SYNTAX Hh3cDot11RRMRadioNbrInfoEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Each entry contains information of RRM neighbor information + of the radio on an AP." + INDEX { hh3cDot11RRMRadioNbrAPID, hh3cDot11RRMRadioNbrRadioID } + ::= { hh3cDot11RRMRadioNbrInfoTable 1 } + +Hh3cDot11RRMRadioNbrInfoEntry ::= + SEQUENCE { + hh3cDot11RRMRadioNbrAPID + Hh3cDot11ObjectIDType, + hh3cDot11RRMRadioNbrRadioID + Hh3cDot11RadioScopeType, + hh3cDot11RRMRadioNbrSSID + OCTET STRING + } + +hh3cDot11RRMRadioNbrAPID OBJECT-TYPE + SYNTAX Hh3cDot11ObjectIDType + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "AP serial id." + ::= { hh3cDot11RRMRadioNbrInfoEntry 1 } + +hh3cDot11RRMRadioNbrRadioID OBJECT-TYPE + SYNTAX Hh3cDot11RadioScopeType + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Radio Id on AP." + ::= { hh3cDot11RRMRadioNbrInfoEntry 2 } + +hh3cDot11RRMRadioNbrSSID OBJECT-TYPE + SYNTAX OCTET STRING + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "All neighbour SSIDs scanned by the selected radio." + ::= { hh3cDot11RRMRadioNbrInfoEntry 3 } + +hh3cDot11RRMNotifyGroup OBJECT IDENTIFIER ::= { hh3cDot11RRM 3 } + +hh3cDot11RRMChlQltyNotifications OBJECT IDENTIFIER ::= { hh3cDot11RRMNotifyGroup 1 } + +hh3cDot11RRMChlQltyNtfPrefix OBJECT IDENTIFIER ::= { hh3cDot11RRMChlQltyNotifications 0 } + +hh3cDot11RRMIntrfLimit NOTIFICATION-TYPE + OBJECTS { hh3cDot11RRMChlRptIntrf } + STATUS current + DESCRIPTION + "This notification will be sent when interference on the radio + exceeds the limit." + ::= { hh3cDot11RRMChlQltyNtfPrefix 1 } + +hh3cDot11RRMPERLimit NOTIFICATION-TYPE + OBJECTS { hh3cDot11RRMChlRptPER } + STATUS current + DESCRIPTION + "This notification will be sent when packet error rate on the + radio exceeds the limit." + ::= { hh3cDot11RRMChlQltyNtfPrefix 2 } + +hh3cDot11RRMNoiseLimit NOTIFICATION-TYPE + OBJECTS { hh3cDot11RRMChlRptNoise } + STATUS current + DESCRIPTION + "This notification will be sent when noise on the radio exceeds + the limit." + ::= { hh3cDot11RRMChlQltyNtfPrefix 3 } + +hh3cDot11RRMResChgNotifications OBJECT IDENTIFIER ::= { hh3cDot11RRMNotifyGroup 2 } + +hh3cDot11RRMResChgNtfPrefix OBJECT IDENTIFIER ::= { hh3cDot11RRMResChgNotifications 0 } + +hh3cDot11RRMPowerChange NOTIFICATION-TYPE + OBJECTS { hh3cDot11RRMRadioIndex, hh3cDot11NewPower, hh3cDot11OldPower } + STATUS current + DESCRIPTION + "This notification will be sent when power changed on the radio + automatically." + ::= { hh3cDot11RRMResChgNtfPrefix 1 } + +hh3cDot11RRMNotificationsVar OBJECT IDENTIFIER ::= { hh3cDot11RRMNotifyGroup 3 } + +hh3cDot11NewPower OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "Power of the radio after the change of power." + ::= { hh3cDot11RRMNotificationsVar 1 } + +hh3cDot11OldPower OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "Power of the radio before the change of power." + ::= { hh3cDot11RRMNotificationsVar 2 } + +hh3cDot11MonitorDetectedGroup OBJECT IDENTIFIER ::= { hh3cDot11RRM 4 } + +hh3cDot11MonitorDetectedDevTable OBJECT-TYPE + SYNTAX SEQUENCE OF Hh3cDot11MonitorDetectedDevEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table shows the devices of AP detected" + ::= { hh3cDot11MonitorDetectedGroup 1 } + +hh3cDot11MonitorDetectedDevEntry OBJECT-TYPE + SYNTAX Hh3cDot11MonitorDetectedDevEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Each entry contains information of detected devices." + INDEX + { + hh3cDot11MonitorDevMAC, hh3cDot11APElementIndex + } + ::= { hh3cDot11MonitorDetectedDevTable 1 } + +Hh3cDot11MonitorDetectedDevEntry ::= + SEQUENCE { + hh3cDot11MonitorDevMAC + MacAddress, + hh3cDot11MonitorDevType + INTEGER, + hh3cDot11MonitorDevVendor + OCTET STRING, + hh3cDot11MonitorDevSSID + OCTET STRING, + hh3cDot11MonitorDevBSSID + MacAddress, + hh3cDot11MonitorDevChannel + Hh3cDot11ChannelScopeType, + hh3cDot11MonitorRadioId + Hh3cDot11RadioScopeType, + hh3cDot11MonitorDevMaxRSSI + Integer32, + hh3cDot11MonitorDevBeaconIntvl + Integer32, + hh3cDot11MonitorDevFstDctTime + DateAndTime, + hh3cDot11MonitorDevLstDctTime + DateAndTime, + hh3cDot11MonitorDevClear + TruthValue, + hh3cDot11MonitorDevSNR + Integer32 + } + +hh3cDot11MonitorDevMAC OBJECT-TYPE + SYNTAX MacAddress + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Represents MAC address of the device detected." + ::= { hh3cDot11MonitorDetectedDevEntry 1 } + +hh3cDot11MonitorDevType OBJECT-TYPE + SYNTAX INTEGER + { + client(1), + ap(2), + adhoc(3), + wirelessBridge(4), + unknown(5) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Represents type of the device detected." + ::= { hh3cDot11MonitorDetectedDevEntry 2 } + +hh3cDot11MonitorDevVendor OBJECT-TYPE + SYNTAX OCTET STRING + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Represents vendor of the detected device." + ::= { hh3cDot11MonitorDetectedDevEntry 3 } + +hh3cDot11MonitorDevSSID OBJECT-TYPE + SYNTAX OCTET STRING + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Represents the service set identifier for the ESS of the device which + type is ap or adhoc." + ::= { hh3cDot11MonitorDetectedDevEntry 4 } + +hh3cDot11MonitorDevBSSID OBJECT-TYPE + SYNTAX MacAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Represents the basic service set identifier of the detected device." + ::= { hh3cDot11MonitorDetectedDevEntry 5 } + +hh3cDot11MonitorDevChannel OBJECT-TYPE + SYNTAX Hh3cDot11ChannelScopeType + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Represents the channel in which the device was last detected. AP will + choose the channel which has maximum signal strength as effective + channel, as there is interference between adjacent channels." + ::= { hh3cDot11MonitorDetectedDevEntry 6 } + +hh3cDot11MonitorRadioId OBJECT-TYPE + SYNTAX Hh3cDot11RadioScopeType + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Represents the radio ID of the AP that detected the device." + ::= { hh3cDot11MonitorDetectedDevEntry 7 } + +hh3cDot11MonitorDevMaxRSSI OBJECT-TYPE + SYNTAX Integer32 + UNITS "dbm" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Represents the maximum detected RSSI of the device in a scan report cycle." + ::= { hh3cDot11MonitorDetectedDevEntry 8 } + +hh3cDot11MonitorDevBeaconIntvl OBJECT-TYPE + SYNTAX Integer32 + UNITS "millisecond" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Represents the beacon interval for the detected device(not include + the device which type is client)." + ::= { hh3cDot11MonitorDetectedDevEntry 9 } + +hh3cDot11MonitorDevFstDctTime OBJECT-TYPE + SYNTAX DateAndTime + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Represents the time at which the device was first detected." + ::= { hh3cDot11MonitorDetectedDevEntry 10 } + +hh3cDot11MonitorDevLstDctTime OBJECT-TYPE + SYNTAX DateAndTime + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Represents the time at which the device was detected last time." + ::= { hh3cDot11MonitorDetectedDevEntry 11 } + +hh3cDot11MonitorDevClear OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object is used to clear the information of the device detected + in the WLAN. + It will return false for get operation." + ::= { hh3cDot11MonitorDetectedDevEntry 12 } + +hh3cDot11MonitorDevSNR OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Represents the SNR of the device in a scan report cycle." + ::= { hh3cDot11MonitorDetectedDevEntry 13 } + +END |