diff options
Diffstat (limited to 'MIBS/cisco/CISCOSB-POE-MIB')
| -rw-r--r-- | MIBS/cisco/CISCOSB-POE-MIB | 891 |
1 files changed, 891 insertions, 0 deletions
diff --git a/MIBS/cisco/CISCOSB-POE-MIB b/MIBS/cisco/CISCOSB-POE-MIB new file mode 100644 index 0000000..39a2bb4 --- /dev/null +++ b/MIBS/cisco/CISCOSB-POE-MIB @@ -0,0 +1,891 @@ +CISCOSB-POE-MIB DEFINITIONS ::= BEGIN + +-- Title: CISCOSB LOCALIZATION ROS +-- This Private MIB is enhancement for rfc3621.txt - Power Ethernet Mib +-- Version: 7.60 +-- Date: 28 Nov 2005 + +IMPORTS + switch001 FROM CISCOSB-MIB + DisplayString, TruthValue FROM SNMPv2-TC + InterfaceIndexOrZero, InterfaceIndex FROM IF-MIB + OBJECT-TYPE, MODULE-IDENTITY, Unsigned32 FROM SNMPv2-SMI + PortList FROM Q-BRIDGE-MIB; + + +rlPoe MODULE-IDENTITY + LAST-UPDATED "202105190000Z" + ORGANIZATION "Cisco Systems, Inc." + + CONTACT-INFO + "Postal: 170 West Tasman Drive + San Jose , CA 95134-1706 + USA + + + Website: Cisco Small Business Support Community <http://www.cisco.com/go/smallbizsupport>" + + DESCRIPTION + "Add a new field in the PoE MIB to indicate Max power allocation allowed" + REVISION "202105190000Z" + DESCRIPTION + "The private MIB module definition for Power Over Ethernet." + REVISION "200911260000Z" + DESCRIPTION + "Initial revision." + ::= { switch001 108 } +RlPoeType ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION "PoE types: + 1 - none: no PoE, unknown type; + 2 - PoE: Standard AF PoE + 3 - PoE Plus: Standard AT PoE + 4 - 60 W: 60W poe port + 5 - PoE BT: 802.3BT standard" + SYNTAX INTEGER { + none(1), + poe(2), + poeplus(3), + poe60w(4), + poeBT(5) + } + +--rlPethPsePortTable + +rlPethPsePortTable OBJECT-TYPE + SYNTAX SEQUENCE OF RlPethPsePortEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + " The table listing additional information for Power Over Ethernet ports." + ::= {rlPoe 1 } + +rlPethPsePortEntry OBJECT-TYPE + SYNTAX RlPethPsePortEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + " An entry in the rlPethPsePortTable." + INDEX { rlPethPsePortGroupIndex , rlPethPsePortIndex } + ::= {rlPethPsePortTable 1 } + +RlPethPsePortEntry ::= SEQUENCE { + rlPethPsePortGroupIndex INTEGER, + rlPethPsePortIndex INTEGER, + rlPethPsePortOutputVoltage INTEGER, + rlPethPsePortOutputCurrent INTEGER, + rlPethPsePortOutputPower INTEGER, + rlPethPsePortPowerLimit INTEGER, + rlPethPsePortStatus INTEGER, + rlPethPsePortStatusDescription DisplayString, + rlPethPsePortOperPowerLimit INTEGER, + rlPethPsePortTimeRangeName DisplayString, + rlPethPsePortOperStatus TruthValue, + rlPethPsePortMaxPowerAllocAllowed INTEGER, + rlPethPsePortSupportPoeType RlPoeType, + rlPethPsePortLinkPartnerPoeType RlPoeType, + rlPethPsePortFourPairForced INTEGER, + rlPethPsePortFourPairEnabled INTEGER, + rlPethPsePortNegotiationAllocatedPower INTEGER, + rlPethPsePortNegotiationProtocolOwner INTEGER, + rlPethPsePortLegacySupport INTEGER, + rlPethPsePortHighPowerModeEnable INTEGER, + rlPethPsePortMenagementMode INTEGER, + rlPethPsePortStaticPowerAllocation INTEGER, + rlPethPsePortHighPowerOpStatus INTEGER +} + +rlPethPsePortGroupIndex OBJECT-TYPE + SYNTAX INTEGER (1..2147483647) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This variable uniquely identifies the group + containing the port to which a power Ethernet PSE is + connected. Group means box in the stack, module in a + rack and the value 1 MUST be used for non-modular devices. + Furthermore, the same value MUST be used in this variable, + pethMainPseGroupIndex, and pethNotificationControlGroupIndex + to refer to a given box in a stack or module in the rack." + ::= { rlPethPsePortEntry 1 } + +rlPethPsePortIndex OBJECT-TYPE + SYNTAX INTEGER (1..2147483647) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This variable uniquely identifies the power Ethernet PSE + port within group pethPsePortGroupIndex to which the + power Ethernet PSE entry is connected." + ::= { rlPethPsePortEntry 2 } + +rlPethPsePortOutputVoltage OBJECT-TYPE + SYNTAX INTEGER (0..2147483647) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This variable indicates on the output voltage level in milli volts from rlPethPsePortIndex." + ::= { rlPethPsePortEntry 3 } + +rlPethPsePortOutputCurrent OBJECT-TYPE + SYNTAX INTEGER (0..2147483647) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This variable indicates on the output current level in milli amper from rlPethPsePortIndex." + ::= { rlPethPsePortEntry 4 } + +rlPethPsePortOutputPower OBJECT-TYPE + SYNTAX INTEGER (0..2147483647) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This variable indicates on the output power level in milli watts from rlPethPsePortIndex." + ::= { rlPethPsePortEntry 5 } + +rlPethPsePortPowerLimit OBJECT-TYPE + SYNTAX INTEGER (0..2147483647) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This variable indicates on the user configured power level in milli watts which is available from rlPethPsePortIndex." + ::= { rlPethPsePortEntry 6 } + +rlPethPsePortStatus OBJECT-TYPE + SYNTAX INTEGER (0..2147483647) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This variable indicates on the hardware status of rlPethPsePortIndex." + ::= { rlPethPsePortEntry 7 } + +rlPethPsePortStatusDescription OBJECT-TYPE + SYNTAX DisplayString(SIZE(0..120)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This variable indicates the description of the hardware status of rlPethPsePortIndex." + ::= { rlPethPsePortEntry 8 } + +rlPethPsePortOperPowerLimit OBJECT-TYPE + SYNTAX INTEGER (0..2147483647) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This variable indicates the maximum power level in milli watts which is available from rlPethPsePortIndex." + ::= { rlPethPsePortEntry 9 } + +rlPethPsePortTimeRangeName OBJECT-TYPE + SYNTAX DisplayString(SIZE(0..32)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This variable is used to bind PoE port to time range." + ::= { rlPethPsePortEntry 10 } + +rlPethPsePortOperStatus OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This Read-Only variable indicates PoE port current status affected by time range active/inactive and admin status." + ::= { rlPethPsePortEntry 11 } + +rlPethPsePortMaxPowerAllocAllowed OBJECT-TYPE + SYNTAX INTEGER (0..2147483647) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This variable indicates the maximum power allocation allowed per port (including wire power loses) in milli-watts which is available from rlPethPsePortIndex." + ::= { rlPethPsePortEntry 12 } + +rlPethPsePortSupportPoeType OBJECT-TYPE + SYNTAX RlPoeType + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This variable indicates the supported type of the PoE port" + ::= { rlPethPsePortEntry 13 } + +rlPethPsePortLinkPartnerPoeType OBJECT-TYPE + SYNTAX RlPoeType + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This variable indicates the link partner PoE type." + ::= { rlPethPsePortEntry 14 } + +rlPethPsePortFourPairForced OBJECT-TYPE + SYNTAX INTEGER { + forcedEnable(0), + forcedDisable(1) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This variable enabled the spare pair ALT_B in 60W port to force 4 pair enable." + ::= { rlPethPsePortEntry 15 } + +rlPethPsePortFourPairEnabled OBJECT-TYPE + SYNTAX INTEGER { + fourPairEnable(1), + fourPairDisable(2) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This variable indicates that spare pair ALT_B is enable." + ::= { rlPethPsePortEntry 16 } + +rlPethPsePortNegotiationAllocatedPower OBJECT-TYPE + SYNTAX INTEGER (0..2147483647) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This variable indicates the power allocation in milli watts from power negotiation" + ::= { rlPethPsePortEntry 17 } + +rlPethPsePortNegotiationProtocolOwner OBJECT-TYPE + SYNTAX INTEGER { + protocolOwnerNone(0), + protocolOwnerCDP(1), + protocolOwnerLLDP(2), + protocolOwnerCDPExpired(3), + protocolOwnerLLDPExpired(4) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This variable indicates the protocol owner on power management negotiation protocol" + ::= { rlPethPsePortEntry 18 } + +rlPethPsePortLegacySupport OBJECT-TYPE + SYNTAX INTEGER { + not-relevant(0), + enabled(1), + disabled(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This variable identifies poe Legacy per port configuration mode" + ::= { rlPethPsePortEntry 19 } + +rlPethPsePortHighPowerModeEnable OBJECT-TYPE + SYNTAX INTEGER { + not-relevant(0), + enabled(1), + disabled(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This variable identifies poe port high power configuration mode" + ::= { rlPethPsePortEntry 20 } + +rlPethPsePortMenagementMode OBJECT-TYPE + SYNTAX INTEGER { + not-relevant(0), + dynamic(1), + static(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This variable identifies poe power management mode configuration mode" + ::= { rlPethPsePortEntry 21 } + +rlPethPsePortStaticPowerAllocation OBJECT-TYPE + SYNTAX INTEGER (0..2147483647) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This variable indicates PoE Static power allocation. + Static power allocation can be configured by setting rlPethPsePortMenagementMode" + ::= { rlPethPsePortEntry 22 } + +rlPethPsePortHighPowerOpStatus OBJECT-TYPE + SYNTAX INTEGER { + not-relevant(0), + enabled(1), + disabled(2) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This variable identifies the poe port high power status" + ::= { rlPethPsePortEntry 23 } + +--rlPethMainPseTable + +rlPethMainPseTable OBJECT-TYPE + SYNTAX SEQUENCE OF RlPethMainPseEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + " The table listing additional read - only information for Power Over Ethernet." + ::= {rlPoe 2 } + +rlPethMainPseEntry OBJECT-TYPE + SYNTAX RlPethMainPseEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + " An entry in the rlPethMainPseTable." + INDEX { rlPethMainPseGroupIndex } + ::= {rlPethMainPseTable 1 } + +RlPethMainPseEntry ::= SEQUENCE { + rlPethMainPseGroupIndex INTEGER, + rlPethMainPseSwVersion DisplayString, + rlPethMainPseHwVersion DisplayString, + rlPethMainPseHwType INTEGER, + rlPethMainPsePowerGuardBand INTEGER, + rlPethMainPsePowerManagementMode INTEGER, + rlPethMainPsedisconnectMethod INTEGER, + rlPethMainPseTemperatureSensor INTEGER, + rlPethMainPseInrushTestEnabled INTEGER, + rlPethMainPseLegacyDisabled INTEGER, + rlPethMainBanksValues OCTET STRING, + rlPethMainBanksActivePowerBank INTEGER +} + +rlPethMainPseGroupIndex OBJECT-TYPE + SYNTAX INTEGER (1..2147483647) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This variable uniquely identifies the group + containing the port to which a power Ethernet PSE is + connected. Group means box in the stack, module in a + rack and the value 1 MUST be used for non-modular devices. + Furthermore, the same value MUST be used in this variable, + pethMainPseGroupIndex, and pethNotificationControlGroupIndex + to refer to a given box in a stack or module in the rack." + ::= { rlPethMainPseEntry 1 } + +rlPethMainPseSwVersion OBJECT-TYPE + SYNTAX DisplayString(SIZE(0..20)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This variable identifies the MCU SW version." + ::= { rlPethMainPseEntry 2 } + +rlPethMainPseHwVersion OBJECT-TYPE + SYNTAX DisplayString(SIZE(0..20)) + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION + "This variable identifies the MCU HW version." + ::= { rlPethMainPseEntry 3 } + +rlPethMainPseHwType OBJECT-TYPE + SYNTAX INTEGER { + enhanced(1), + plus(2), + auto(3), + nonPoe(4), + enhancedPlus(5), + poe60w(6), + poeBT(7) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This variable identifies the MCU HW type (enhanced, plus, none)." + ::= { rlPethMainPseEntry 4 } + +rlPethMainPsePowerGuardBand OBJECT-TYPE + SYNTAX INTEGER (0..254) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This variable identifies the guard band in [W] for not connecting + additional ports." + ::= { rlPethMainPseEntry 5 } + +rlPethMainPsePowerManagementMode OBJECT-TYPE + SYNTAX INTEGER { + portlimit(0), + classlimit(5), + maxlimit(6) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This variable identifies power management mode." + ::= { rlPethMainPseEntry 6 } + +rlPethMainPsedisconnectMethod OBJECT-TYPE + SYNTAX INTEGER { + lowestpriority(0), + nextport(1) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This variable identifies disconnect method. " + ::= { rlPethMainPseEntry 7 } + +rlPethMainPseTemperatureSensor OBJECT-TYPE + SYNTAX INTEGER (-200..200) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This variable identifies the pd temperature sensor. " + ::= { rlPethMainPseEntry 8 } + +rlPethMainPseInrushTestEnabled OBJECT-TYPE + SYNTAX INTEGER { + enabled(0), + disabled(1) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This variable identifies if HW inrush test will be disabled. + by default HW inrush test is enabled." + ::= { rlPethMainPseEntry 9 } + +rlPethMainPseLegacyDisabled OBJECT-TYPE + SYNTAX INTEGER { + enabled(0), + disabled(1) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This variable identifies poe Legacy global configuration mode" + ::= { rlPethMainPseEntry 10 } + +rlPethMainBanksValues OBJECT-TYPE + SYNTAX OCTET STRING + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This variable returns 16 power-banks of a specific switch" + ::= { rlPethMainPseEntry 11 } + +rlPethMainBanksActivePowerBank OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This variable returns the active power-bank of a specific switch" + ::= { rlPethMainPseEntry 12 } + +--rlPethPdPortTable + +rlPethPdPortTable OBJECT-TYPE + SYNTAX SEQUENCE OF RlPethPdPortEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + " The table listing additional read-write information for Power Over Ethernet - PD side." + ::= {rlPoe 4 } + +rlPethPdPortEntry OBJECT-TYPE + SYNTAX RlPethPdPortEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + " An entry in the rlPethPdPortTable." + INDEX { rlPethPdPortIndex } + ::= {rlPethPdPortTable 1} + +RlPethPdPortEntry ::= SEQUENCE { + rlPethPdPortIndex InterfaceIndex, + rlPethPdPortSupportPoeType RlPoeType, + rlPethPdPortOperPoeType RlPoeType, + rlPethPdPortPowerRequest Unsigned32, + rlPethPdPortPowerAvailable Unsigned32, + rlPethPdPortForcedMode RlPoeType, + rlPethPdPortNegotiationProtocolOwner INTEGER +} + +rlPethPdPortIndex OBJECT-TYPE + SYNTAX InterfaceIndex + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This variable uniquely identifies the power Ethernet PD + port within group rlPethPdPortGroupIndex to which the + power Ethernet PSE entry is connected." + ::= { rlPethPdPortEntry 1 } + +rlPethPdPortSupportPoeType OBJECT-TYPE + SYNTAX RlPoeType + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This variable indicates the PoE type of the PD port (AF/AT/60W)" + ::= { rlPethPdPortEntry 2 } + +rlPethPdPortOperPoeType OBJECT-TYPE + SYNTAX RlPoeType + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This variable indicates the operational PoE status of the PD port" + ::= { rlPethPdPortEntry 3 } + +rlPethPdPortPowerRequest OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This variable indicates the requested power the PD port request from the PSE in mili-Watts" + ::= { rlPethPdPortEntry 4 } + +rlPethPdPortPowerAvailable OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This variable indicates the available power the PSE port offers to the PD port in mili-Watts" + ::= { rlPethPdPortEntry 5 } + +rlPethPdPortForcedMode OBJECT-TYPE + SYNTAX RlPoeType + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This variable indicates the powered PD port forced mode" + ::= { rlPethPdPortEntry 6 } + +rlPethPdPortNegotiationProtocolOwner OBJECT-TYPE + SYNTAX INTEGER { + protocolOwnerNone(0), + protocolOwnerCDP(1), + protocolOwnerLLDP(2), + protocolOwnerCDPExpired(3), + protocolOwnerLLDPExpired(4) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This variable indicates the protocol owner on power management negotiation protocol" + ::= { rlPethPdPortEntry 7 } + + +--rlPethPseUnitTable + +rlPethPseUnitTable OBJECT-TYPE + SYNTAX SEQUENCE OF RlPethPseUnitEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + " The table listing additional read-write information for Power Over Ethernet unit capabilities." + ::= {rlPoe 5 } + +rlPethPseUnitEntry OBJECT-TYPE + SYNTAX RlPethPseUnitEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + " An entry in the rlPethPseUnitTable." + INDEX { rlPethUnitIndex } + ::= {rlPethPseUnitTable 1 } + +RlPethPseUnitEntry ::= SEQUENCE { + rlPethUnitIndex INTEGER, + rlPethUnitType INTEGER, + rlPethUnitColor INTEGER +} + +rlPethUnitIndex OBJECT-TYPE + SYNTAX INTEGER (1..8) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This variable uniquely identifies the unit id. + It means box in the stack, module in a + rack and the value 1 MUST be used for non-modular devices. + Furthermore, the same value MUST be used in this variable, + PethPowerPseGroupIndex, and pethNotificationControlGroupIndex + to refer to a given box in a stack or module in the rack." + ::= { rlPethPseUnitEntry 1 } + +rlPethUnitType OBJECT-TYPE + SYNTAX INTEGER { + unitTypeNone(0), + unitTypePSE(1), + unitTypePD(2), + unitTypePSEPD(3) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This variable identifies the unit type (PSE/PD/Both/None)." + ::= { rlPethPseUnitEntry 2 } + +rlPethUnitColor OBJECT-TYPE + SYNTAX INTEGER { + unitColorNone(0), + unitColorGreen(1), + unitColorYellow(2), + unitColorRed(3) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This variable identifies the unit PSE status (color can be green,yellow,red)." + ::= { rlPethPseUnitEntry 3 } + +-- +-- Clear port counters Section +-- + +rlPethPseCountersClear OBJECT-TYPE + SYNTAX InterfaceIndexOrZero + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Clear poe port counter. By setting the MIB to 0x0FFFFFFF, all poe ports counters are set to zero. + by Setting to port index, all specific poe port counters are set to zero" + ::= {rlPoe 6} + +rlPoeClassErrorDetectionStatus OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Specifies if class detection error is enabled (true) or disabled (false)" + DEFVAL { true } + ::= { rlPoe 8 } + +--rlPethPerPseTable + +rlPethPerPseTable OBJECT-TYPE + SYNTAX SEQUENCE OF RlPethPerPseEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + " The table listing additional information for Power Over Ethernet ports per PSE device." + ::= {rlPoe 9 } + +rlPethPerPseEntry OBJECT-TYPE + SYNTAX RlPethPerPseEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + " An entry in the rlPethPerPseTable." + INDEX { rlPethPerPseGroupIndex, rlPethPerPseDeviceIndex } + ::= {rlPethPerPseTable 1 } + +RlPethPerPseEntry ::= SEQUENCE { + rlPethPerPseGroupIndex INTEGER, + rlPethPerPseDeviceIndex INTEGER, + rlPethPerPseTemperatureValue INTEGER, + rlPethPerPseHwRevision DisplayString, + rlPethPerPseVopStatus INTEGER +} + +rlPethPerPseGroupIndex OBJECT-TYPE + SYNTAX INTEGER (1..8) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This variable uniquely identifies the group + containing the port to which a power Ethernet PSE is + connected. Group means box in the stack, module in a + rack and the value 1 MUST be used for non-modular devices." + ::= { rlPethPerPseEntry 1 } + +rlPethPerPseDeviceIndex OBJECT-TYPE + SYNTAX INTEGER (0..7) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This variable uniquely identifies the PSE device within the group." + ::= { rlPethPerPseEntry 2 } + +rlPethPerPseTemperatureValue OBJECT-TYPE + SYNTAX INTEGER (-200..200) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This variable represents temperature reported from PSE device." + ::= { rlPethPerPseEntry 3 } + +rlPethPerPseHwRevision OBJECT-TYPE + SYNTAX DisplayString(SIZE(0..20)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This variable identifies the MCU HW version." + ::= { rlPethPerPseEntry 4 } + +rlPethPerPseVopStatus OBJECT-TYPE + SYNTAX INTEGER { + deviceOk(0), + detectionError(1), + classificationError(2), + legacyError(3), + undefinedState(4) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Specifies status of VoP problem in PoE device" + DEFVAL { 0 } + ::= { rlPethPerPseEntry 5 } + +rlPethPsePortReactivate OBJECT-TYPE + SYNTAX PortList + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Action MIB scalar. In case the ports in the port-list are disabled due to PoE HW error, + the PoE mechanism will try to re-activate them." + DEFVAL { ''H } -- empty octet string + ::= { rlPoe 10 } + +--rlPethPowerPseTable +--DEPRECATED + +rlPethPowerPseTable OBJECT-TYPE + SYNTAX SEQUENCE OF RlPethPowerPseEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + " The table listing additional read-write information for Power Over Ethernet - PSE side." + ::= {rlPoe 3 } + +rlPethPowerPseEntry OBJECT-TYPE + SYNTAX RlPethPowerPseEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + " An entry in the rlPethPowerPseTable." + INDEX { rlPethPowerPseGroupIndex } + ::= {rlPethPowerPseTable 1 } + +RlPethPowerPseEntry ::= SEQUENCE { + rlPethPowerPseGroupIndex INTEGER, + rlPethPowerPsePower INTEGER, + rlPethPowerPseRpsPower INTEGER, + rlPethPowerPsePowerManagementMode INTEGER, + rlPethPowerPsedisconnectMethod INTEGER, + rlPethPowerPseTemperatureSensor INTEGER, + rlPethPowerPseInrushTestEnabled INTEGER, + rlPethPowerPseLegacyDisabled INTEGER, + rlPethPowerBanksValues OCTET STRING, + rlPethPowerBanksActivePowerBank INTEGER +} + +rlPethPowerPseGroupIndex OBJECT-TYPE + SYNTAX INTEGER (1..8) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This variable uniquely identifies the group + containing the port to which a power Ethernet PSE is + connected. Group means box in the stack, module in a + rack and the value 1 MUST be used for non-modular devices. + Furthermore, the same value MUST be used in this variable, + PethPowerPseGroupIndex, and pethNotificationControlGroupIndex + to refer to a given box in a stack or module in the rack." + ::= { rlPethPowerPseEntry 1 } + + +-- depricated +rlPethPowerPsePower OBJECT-TYPE + SYNTAX INTEGER { + none(0), + ps1(1), + ps2(2), + ps3(3) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This variable identifies the maximum power in [W] supplied by PSE." + ::= { rlPethPowerPseEntry 2 } + +-- depricated +rlPethPowerPseRpsPower OBJECT-TYPE + SYNTAX INTEGER { + none(0), + rps1(1), + rps2(2), + rps3(3) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This variable identifies the maximum power in [W] supplied by PSE + RPS." + ::= { rlPethPowerPseEntry 3 } + +rlPethPowerPsePowerManagementMode OBJECT-TYPE + SYNTAX INTEGER { + portlimit(0), + classlimit(5), + maxlimit(6) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This variable identifies power management mode." + ::= { rlPethPowerPseEntry 4 } + +rlPethPowerPsedisconnectMethod OBJECT-TYPE + SYNTAX INTEGER { + lowestpriority(0), + nextport(1) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This variable identifies disconnect method. " + ::= { rlPethPowerPseEntry 5 } + +rlPethPowerPseTemperatureSensor OBJECT-TYPE + SYNTAX INTEGER (-200..200) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This variable identifies the pd temperature sensor. " + ::= { rlPethPowerPseEntry 6 } + +rlPethPowerPseInrushTestEnabled OBJECT-TYPE + SYNTAX INTEGER { + enabled(0), + disabled(1) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This variable identifies if HW inrush test will be disabled. + by default HW inrush test is enabled." + ::= { rlPethPowerPseEntry 7 } + +rlPethPowerPseLegacyDisabled OBJECT-TYPE + SYNTAX INTEGER { + enabled(0), + disabled(1) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This variable identifies poe Legacy global configuration mode" + ::= { rlPethPowerPseEntry 8 } + +rlPethPowerBanksValues OBJECT-TYPE + SYNTAX OCTET STRING + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This variable returns 16 power-banks of a specific switch" + ::= { rlPethPowerPseEntry 9 } + +rlPethPowerBanksActivePowerBank OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This variable returns the active power-bank of a specific switch" + ::= { rlPethPowerPseEntry 10 } + +END |