summaryrefslogtreecommitdiff
path: root/MIBS/cisco/CISCO-WAN-CELL-EXT-MIB
diff options
context:
space:
mode:
Diffstat (limited to 'MIBS/cisco/CISCO-WAN-CELL-EXT-MIB')
-rw-r--r--MIBS/cisco/CISCO-WAN-CELL-EXT-MIB1367
1 files changed, 1367 insertions, 0 deletions
diff --git a/MIBS/cisco/CISCO-WAN-CELL-EXT-MIB b/MIBS/cisco/CISCO-WAN-CELL-EXT-MIB
new file mode 100644
index 0000000..c339aa1
--- /dev/null
+++ b/MIBS/cisco/CISCO-WAN-CELL-EXT-MIB
@@ -0,0 +1,1367 @@
+-- *****************************************************************
+-- CISCO-WAN-CELL-EXT-MIB.MY: Cisco Cellular 4G/LTE WAN MIB file
+-- January 2014. Shankar Garikapati
+--
+-- Copyright (c) 2014 by cisco Systems, Inc.
+-- All rights reserved.
+--
+-- *****************************************************************
+
+CISCO-WAN-CELL-EXT-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+ MODULE-IDENTITY,
+ OBJECT-TYPE,
+ NOTIFICATION-TYPE,
+ Integer32,
+ Unsigned32,
+ Counter64
+ FROM SNMPv2-SMI
+ MODULE-COMPLIANCE,
+ NOTIFICATION-GROUP,
+ OBJECT-GROUP
+ FROM SNMPv2-CONF
+ entPhysicalIndex,
+ entPhysicalName
+ FROM ENTITY-MIB
+ ifIndex
+ FROM IF-MIB
+ RowStatus,
+ StorageType,
+ TEXTUAL-CONVENTION
+ FROM SNMPv2-TC
+ SnmpAdminString
+ FROM SNMP-FRAMEWORK-MIB
+ InetAddressType,
+ InetAddress
+ FROM INET-ADDRESS-MIB
+ C3gServiceCapability
+ FROM CISCO-WAN-3G-MIB
+ ciscoMgmt
+ FROM CISCO-SMI;
+
+
+ciscoWanCellExtMIB MODULE-IDENTITY
+ LAST-UPDATED "201403050000Z"
+ ORGANIZATION "Cisco Systems, Inc."
+ CONTACT-INFO
+ "Cisco Systems
+ Customer Service
+
+ Postal: 170 W Tasman Drive
+ San Jose, CA 95134
+ USA
+
+ Tel: +1 800 553-NETS
+
+ E-mail: cs-3g@cisco.com
+ cs-4g@cisco.com"
+ DESCRIPTION
+ "This MIB module is an extension of
+ CISCO-WAN-3G-MIB.my, and it provides
+ network management support for Cisco cellular
+ WAN 4G/LTE products.
+
+ *** ABBREVIATIONS, ACRONYMS, AND SYMBOLS ***
+
+ AMBR - Aggregate Maximum Bit Rate
+ APN - Access Point Name
+ ARP - Allocation and Retention Priority
+ CQI - Channel Quality Indicator
+ eNodeB - Evolved Node B
+ EPS - Evolved Packet System
+ E-UTRAN - Evolved Universal Terrestrial Radio Access
+ GBR - Guaranteed Bit Rate
+ LTE - Long Term Evolution
+ MBR - Maximum Bit Rate
+ PCRF - Policy and Charging Rules Function
+ PDN - Packet Data Network
+ QCI - QoS Class Identifier
+ QOS - Quality of Service
+ RF - Radio Frequency
+ RSRP - Reference Signal Receive Power
+ RSRQ - Reference Signal Receive Quality
+ SINR - Signal-to-Interference plus Noise Ratio
+ SNR - Signal-to-Noise Ratio
+ UE - User Equipment"
+ REVISION "201403050000Z"
+ DESCRIPTION
+ "Initial version of this MIB module."
+ ::= { ciscoMgmt 817 }
+
+
+ciscoWanCellExtMIBNotifs OBJECT IDENTIFIER
+ ::= { ciscoWanCellExtMIB 0 }
+
+ciscoWanCellExtMIBObjects OBJECT IDENTIFIER
+ ::= { ciscoWanCellExtMIB 1 }
+
+ciscoWanCellExtMIBConform OBJECT IDENTIFIER
+ ::= { ciscoWanCellExtMIB 2 }
+
+ciscoWanCellExtLte OBJECT IDENTIFIER
+ ::= { ciscoWanCellExtMIBObjects 1 }
+
+cwceLteRadio OBJECT IDENTIFIER
+ ::= { ciscoWanCellExtLte 1 }
+
+cwceLteProfile OBJECT IDENTIFIER
+ ::= { ciscoWanCellExtLte 2 }
+
+
+CiscoWanCellExtProtocolType ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "Generic PDN type."
+ SYNTAX INTEGER {
+ unknown(1),
+ ipv4(2),
+ ppp(3),
+ ipv6(4),
+ ipv4V6(5)
+ }
+
+CiscoWanCellExtRsrp ::= TEXTUAL-CONVENTION
+ DISPLAY-HINT "d"
+ STATUS current
+ DESCRIPTION
+ "Reference signal received power (RSRP) is
+ defined as the linear average over the power
+ contributions and measured in dBm. The reporting
+ range of RSRP is defined per LTE standard
+ with 1 dBm resolution."
+ SYNTAX Integer32
+
+CiscoWanCellExtRsrq ::= TEXTUAL-CONVENTION
+ DISPLAY-HINT "d-1"
+ STATUS current
+ DESCRIPTION
+ "Reference Signal Received Quality (RSRQ) is
+ defined as the ratio NxRSRP over (E-UTRAN carrier RSSI)
+ and measured in dB. The reporting range of
+ RSRQ is defined per LTE standard with 0.5 dB
+ resolution."
+ SYNTAX Integer32
+
+CiscoWanCellExtCqiIndex ::= TEXTUAL-CONVENTION
+ DISPLAY-HINT "d"
+ STATUS current
+ DESCRIPTION
+ "Channel Quality indicator reported to eNodeB
+ which directly translates to Modulation Coding
+ Scheme selected."
+ SYNTAX Unsigned32
+
+CiscoWanCellExtSNR ::= TEXTUAL-CONVENTION
+ DISPLAY-HINT "d-1"
+ STATUS current
+ DESCRIPTION
+ "Signal-to-Noise power Ratio (SNR)
+ is defined as the ratio of signal
+ power to the noise power, measured
+ in dB. It determines the downlink
+ throughput for the UE."
+ SYNTAX Integer32
+
+CiscoWanCellExtSINR ::= TEXTUAL-CONVENTION
+ DISPLAY-HINT "d-1"
+ STATUS current
+ DESCRIPTION
+ "Signal to Interference plus Noise Ratio is
+ the power at the receiver due to the required
+ signal, divided by the power due to noise and
+ interference measured in dB. It is used as a
+ measure of signal quality."
+ SYNTAX Integer32
+
+cwceLteRadioTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF CwceLteRadioEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table contains entPhysicalTable entries which
+ are capable of providing operational Cellular 4G/LTE
+ Radio signal parameters and administrative notification
+ information."
+ ::= { cwceLteRadio 1 }
+
+cwceLteRadioEntry OBJECT-TYPE
+ SYNTAX CwceLteRadioEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry contains management information of Cellular
+ 4G/LTE Radio signal parameters and notification
+ information.
+
+ An entry of this table is created if an entity capable
+ of providing operational Cellular 4G/LTE Radio signal
+ parameters and administrative notification information
+ is detected by the agent.
+
+ An entry of this table is deleted by the agent if the
+ corresponding entry in entPhysicalTable is removed."
+ INDEX { entPhysicalIndex }
+ ::= { cwceLteRadioTable 1 }
+
+CwceLteRadioEntry ::= SEQUENCE {
+ cwceLteCurrRsrp CiscoWanCellExtRsrp,
+ cwceLteCurrRsrq CiscoWanCellExtRsrq,
+ cwceLteCurrSnr CiscoWanCellExtSNR,
+ cwceLteCurrSinr CiscoWanCellExtSINR,
+ cwceLteCurrCqiIndex CiscoWanCellExtCqiIndex,
+ cwceLteCurrOperatingBand Unsigned32,
+ cwceLteNotifRsrp CiscoWanCellExtRsrp,
+ cwceLteNotifRsrq CiscoWanCellExtRsrq,
+ cwceLteRsrpOnsetNotifThreshold CiscoWanCellExtRsrp,
+ cwceLteRsrpAbateNotifThreshold CiscoWanCellExtRsrp,
+ cwceLteRsrqOnsetNotifThreshold CiscoWanCellExtRsrq,
+ cwceLteRsrqAbateNotifThreshold CiscoWanCellExtRsrq,
+ cwceLteRsrpOnsetNotifFlag C3gServiceCapability,
+ cwceLteRsrpAbateNotifFlag C3gServiceCapability,
+ cwceLteRsrqOnsetNotifFlag C3gServiceCapability,
+ cwceLteRsrqAbateNotifFlag C3gServiceCapability
+}
+
+cwceLteCurrRsrp OBJECT-TYPE
+ SYNTAX CiscoWanCellExtRsrp
+ UNITS "dBm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object indicates the LTE RSRP value reported by
+ the modem."
+ ::= { cwceLteRadioEntry 1 }
+
+cwceLteCurrRsrq OBJECT-TYPE
+ SYNTAX CiscoWanCellExtRsrq
+ UNITS "dB"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object indicates the LTE RSRQ value reported by
+ the modem."
+ ::= { cwceLteRadioEntry 2 }
+
+cwceLteCurrSnr OBJECT-TYPE
+ SYNTAX CiscoWanCellExtSNR
+ UNITS "dB"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object indicates the LTE SNR value reported by
+ the modem."
+ ::= { cwceLteRadioEntry 3 }
+
+cwceLteCurrSinr OBJECT-TYPE
+ SYNTAX CiscoWanCellExtSINR
+ UNITS "dB"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object indicates the LTE SINR value measured in
+ decibels (dB) reported by the modem."
+ ::= { cwceLteRadioEntry 4 }
+
+cwceLteCurrCqiIndex OBJECT-TYPE
+ SYNTAX CiscoWanCellExtCqiIndex
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object indicates he LTE CQI Index reported by
+ the modem."
+ ::= { cwceLteRadioEntry 5 }
+
+cwceLteCurrOperatingBand OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object indicates the E-UTRAN Operating Band reported
+ by the modem."
+ ::= { cwceLteRadioEntry 6 }
+
+cwceLteNotifRsrp OBJECT-TYPE
+ SYNTAX CiscoWanCellExtRsrp
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object indicates the LTE RSRP value reported by
+ the modem which triggered the most recent
+ cwceLteRsrpOnsetNotif or cwceLteRsrpAbateNotif
+ notification."
+ ::= { cwceLteRadioEntry 7 }
+
+cwceLteNotifRsrq OBJECT-TYPE
+ SYNTAX CiscoWanCellExtRsrq
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object indicates the LTE RSRP value reported by
+ the modem which triggered the most recent
+ cwceLteRsrqOnsetNotif or cwceLteRsrqAbateNotif
+ notification."
+ ::= { cwceLteRadioEntry 8 }
+
+cwceLteRsrpOnsetNotifThreshold OBJECT-TYPE
+ SYNTAX CiscoWanCellExtRsrp
+ UNITS "dBm"
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object specifies the RSRP onset threshold
+ value. If the value of cwceLteCurrRsrp goes
+ below the threshold and the service bit in
+ cwceLteRsrpOnsetNotifFlag is set, the
+ cwceLteRsrqOnsetNotif notification for that
+ service will be sent. The absolute value of
+ cwceLteRsrpAbateNotifThreshold should be less
+ than or equal to the absolute value of
+ cwceLteRsrpOnsetNotifThreshold
+ (|cwceLteRsrpAbateNotifThreshold| <=
+ |cwceLteRsrpOnsetNotifThreshold|)."
+ ::= { cwceLteRadioEntry 9 }
+
+cwceLteRsrpAbateNotifThreshold OBJECT-TYPE
+ SYNTAX CiscoWanCellExtRsrp
+ UNITS "dBm"
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object specifies the RSRP abate
+ threshold value. If the value of
+ cwceLteCurrRsrp goes above the threshold
+ and the service bit in cwceLteRsrpOnsetNotifFlag
+ is set, the cwceLteRsrpAbateNotif notification
+ for that service will be sent. The absolute
+ value of cwceLteRsrpAbateNotifThreshold should
+ be less than or equal to the absolute value of
+ cwceLteRsrpOnsetNotifThreshold
+ (|cwceLteRsrpAbateNotifThreshold| <=
+ |cwceLteRsrpOnsetNotifThreshold|)."
+ ::= { cwceLteRadioEntry 10 }
+
+cwceLteRsrqOnsetNotifThreshold OBJECT-TYPE
+ SYNTAX CiscoWanCellExtRsrq
+ UNITS "dB"
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object specifies the RSRQ onset threshold
+ value. If the value of cwceLteCurrRsrq goes below
+ the threshold and the service bit in
+ cwceLteRsrqOnsetNotifFlag is set, the
+ cwceLteRsrqOnsetNotif notification for that
+ service will be sent. The absolute value of
+ cwceLteRsrqAbateNotifThreshold should be
+ less than or equal to the absolute value of
+ cwceLteRsrqOnsetNotifThreshold
+ (|cwceLteRsrqAbateNotifThreshold| <=
+ |cwceLteRsrqOnsetNotifThreshold|)."
+ ::= { cwceLteRadioEntry 11 }
+
+cwceLteRsrqAbateNotifThreshold OBJECT-TYPE
+ SYNTAX CiscoWanCellExtRsrq
+ UNITS "dB"
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object specifies the RSRQ abate
+ threshold value. If the value of
+ cwceLteCurrRsrq goes above the threshold
+ and the service bit in
+ cwceLteRsrqOnsetNotifFlag is set, the
+ cwceLteRsrqAbateNotif notification for that
+ service will be sent. The absolute value of
+ cwceLteRsrqAbateNotifThreshold should be
+ less than or equal to the absolute value of
+ cwceLteRsrqOnsetNotifThreshold
+ (|cwceLteRsrqAbateNotifThreshold| <=
+ |cwceLteRsrqOnsetNotifThreshold|)."
+ ::= { cwceLteRadioEntry 12 }
+
+cwceLteRsrpOnsetNotifFlag OBJECT-TYPE
+ SYNTAX C3gServiceCapability
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object specifies the flag bitmap to control
+ the generation of notification cwceLteRsrpOnsetNotif.
+ Each bit represents a service as defined in
+ C3gServiceCapability, set the bit value to 1
+ to enable (and 0 to disable) the generation of
+ notification cwceLteRsrpOnsetNotif for that service.
+ The default value of this object is all bits are 0.
+ Notifications are not generated in technology modes
+ where RSRP is not relevant."
+ ::= { cwceLteRadioEntry 13 }
+
+cwceLteRsrpAbateNotifFlag OBJECT-TYPE
+ SYNTAX C3gServiceCapability
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object specifies the flag bitmap to control the generation
+ of notification cwceLteRsrpAbateNotif. Each bit
+ represents a service as defined in C3gServiceCapability,
+ set the bit value to 1 to enable (and 0 to disable) the
+ generation of notification cwceLteRsrpAbateNotif
+ for that service. The default value of this object is
+ all bits are 0. Notifications are not generated in
+ technology modes where RSRP is not relevant."
+ ::= { cwceLteRadioEntry 14 }
+
+cwceLteRsrqOnsetNotifFlag OBJECT-TYPE
+ SYNTAX C3gServiceCapability
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object specifies the flag bitmap to control the generation
+ of notification cwceLteRsrqOnsetNotif. Each bit
+ represents a service as defined in C3gServiceCapability,
+ set the bit value to 1 to enable (and 0 to disable) the
+ generation of notification cwceLteRsrqOnsetNotif
+ for that service. The default value of this object is
+ all bits are 0. Notifications are not generated in
+ technology modes where RSRQ is not relevant."
+ ::= { cwceLteRadioEntry 15 }
+
+cwceLteRsrqAbateNotifFlag OBJECT-TYPE
+ SYNTAX C3gServiceCapability
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object specifies the flag bitmap to control the generation
+ of notification cwceLteRsrqAbateNotif. Each bit
+ represents a service as defined in C3gServiceCapability,
+ set the bit value to 1 to enable (and 0 to disable) the
+ generation of notification cwceLteRsrqAbateNotif
+ for that service. The default value of this object is
+ all bits are 0. Notifications are not generated in
+ technology modes where RSRQ is not relevant."
+ ::= { cwceLteRadioEntry 16 }
+
+
+cwceLteRadioHistory OBJECT IDENTIFIER
+ ::= { cwceLteRadio 2 }
+
+
+cwceLteRadioHistoryRsrpTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF CwceLteRadioHistoryRsrpEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table contains Cellular 4G/LTE RSRP history.
+ The history of RSRP are carried in an octet of string.
+ Each octet in the octet string has a value from 40 to
+ 140 and the 150 value is reserved to indicate an
+ uninitialized (Invalid) value. The format of
+ the octet string with n octets is as following:
+ [ octet 0 is latest,
+ octet 1 is latest-1,
+ .
+ .
+ octet n-2 is oldest-1,
+ octet n-1 is oldest ]
+
+ To convert the provided value into dBm the following formula
+ should be used:
+ dBm = (-1)*value"
+ ::= { cwceLteRadioHistory 1 }
+
+cwceLteRadioHistoryRsrpEntry OBJECT-TYPE
+ SYNTAX CwceLteRadioHistoryRsrpEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry contains management information of Cellular
+ 4G/LTE RSRP Radio history parameters.
+
+ An entry of this table is created if an entity capable
+ of providing operational Cellular 4G/LTE RSRP Radio
+ history is detected by the agent.
+
+ An entry of this table is deleted by the agent if the
+ corresponding entry in entPhysicalTable is removed."
+ INDEX { entPhysicalIndex }
+ ::= { cwceLteRadioHistoryRsrpTable 1 }
+
+CwceLteRadioHistoryRsrpEntry ::= SEQUENCE {
+ cwceLteRadioHistoryRsrpPerSecond OCTET STRING,
+ cwceLteRadioHistoryRsrpPerMinute OCTET STRING,
+ cwceLteRadioHistoryRsrpPerHour OCTET STRING
+}
+
+cwceLteRadioHistoryRsrpPerSecond OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (60))
+ UNITS "-dBm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object indicates per-second RSRP history.
+ It contains a per-second history of RSRP values
+ for the last 60 seconds."
+ ::= { cwceLteRadioHistoryRsrpEntry 1 }
+
+cwceLteRadioHistoryRsrpPerMinute OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (60))
+ UNITS "-dBm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object indicates per-minute weakest RSRP value history.
+ It contains a per-minute history of weakest RSRP values for
+ the last 60 minutes. The octet in the string is the weakest
+ RSRP value measured in a minute interval."
+ ::= { cwceLteRadioHistoryRsrpEntry 2 }
+
+cwceLteRadioHistoryRsrpPerHour OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (72))
+ UNITS "-dBm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object indicates per-hour weakest RSRP value history.
+ It contains a per-hour history of weakest RSRP values for
+ the last 72 hours. The octet in the string is the weakest
+ RSRP value measured in an hour interval."
+ ::= { cwceLteRadioHistoryRsrpEntry 3 }
+
+
+
+cwceLteRadioHistoryRsrqTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF CwceLteRadioHistoryRsrqEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table contains Cellular 4G/LTE RSRQ history.
+ The history of RSRQ are carried in an octet of string.
+ Each octet in the octet string has a value from 3 to 20
+ and the 25 value is reserved to indicate an uninitialized
+ (Invalid) value. The format of the octet string with n
+ octets is as following:
+ [ octet 0 is latest,
+ octet 1 is latest-1,
+ .
+ .
+ octet n-2 is oldest-1,
+ octet n-1 is oldest ]
+
+ To convert the provided value into dB the following formula
+ should be used:
+ dB = (-1)*value"
+ ::= { cwceLteRadioHistory 2 }
+
+cwceLteRadioHistoryRsrqEntry OBJECT-TYPE
+ SYNTAX CwceLteRadioHistoryRsrqEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry contains management information of Cellular
+ 4G/LTE RSRQ Radio history parameters.
+
+ An entry of this table is created if an entity capable
+ of providing operational Cellular 4G/LTE RSRQ Radio
+ history is detected by the agent.
+
+ An entry of this table is deleted by the agent if the
+ corresponding entry in entPhysicalTable is removed."
+ INDEX { entPhysicalIndex }
+ ::= { cwceLteRadioHistoryRsrqTable 1 }
+
+CwceLteRadioHistoryRsrqEntry ::= SEQUENCE {
+ cwceLteRadioHistoryRsrqPerSecond OCTET STRING,
+ cwceLteRadioHistoryRsrqPerMinute OCTET STRING,
+ cwceLteRadioHistoryRsrqPerHour OCTET STRING
+}
+
+cwceLteRadioHistoryRsrqPerSecond OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (60))
+ UNITS "-dB"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object indicates per-second RSRQ history.
+ It contains a per-second history of RSRQ values for
+ the last 60 seconds."
+ ::= { cwceLteRadioHistoryRsrqEntry 1 }
+
+cwceLteRadioHistoryRsrqPerMinute OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (60))
+ UNITS "-dB"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object indicates per-minute weakest RSRQ value history.
+ It contains a per-minute history of weakest RSRQ values
+ for the last 60 minutes. The octet in the string is the
+ weakest RSRQ value measured in a minute interval."
+ ::= { cwceLteRadioHistoryRsrqEntry 2 }
+
+cwceLteRadioHistoryRsrqPerHour OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (72))
+ UNITS "-dB"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object indicates per-hour weakest RSRQ value history.
+ It contains a per-hour history of weakest RSRQ values
+ for the last 72 hours. The octet in the string is
+ the weakest RSRQ value measured in an hour interval."
+ ::= { cwceLteRadioHistoryRsrqEntry 3 }
+
+
+
+cwceLteIpv4AddrType OBJECT-TYPE
+ SYNTAX InetAddressType
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The object indicates the type of Internet address for
+ IPv4 addresses used by profiles and PDNs.
+
+ The valid value for this object is ipv4(1)."
+ ::= { cwceLteProfile 1 }
+
+cwceLteIpv6AddrType OBJECT-TYPE
+ SYNTAX InetAddressType
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The object indicates the type of Internet address for
+ IPv6 addresses used by profiles and PDNs.
+
+ The valid value for this object is ipv6(2)."
+ ::= { cwceLteProfile 2 }
+
+cwceLteProfileTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF CwceLteProfileEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table contains Cellular LTE PDN profiles.
+ Cellular device contains multiple profile entries which can
+ be used to establish cellular data connections (PDN contexts).
+ Users can choose any of available PDN profiles to establish
+ data connections. Data connections are described in
+ cwcePacketLteSessionTable.
+
+ This table is valid only in 4G/LTE Technology mode."
+ ::= { cwceLteProfile 3 }
+
+cwceLteProfileEntry OBJECT-TYPE
+ SYNTAX CwceLteProfileEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry contains management information of Cellular
+ 4G/LTE profile parameters.
+
+ Entries in this table can be created or deleted using
+ cwceLteProfileRowStatus object.
+
+ An entry of this table is deleted by the agent if the
+ corresponding entry in entPhysicalTable is removed."
+ INDEX {
+ entPhysicalIndex,
+ cwceLteProfileIndex
+ }
+ ::= { cwceLteProfileTable 1 }
+
+CwceLteProfileEntry ::= SEQUENCE {
+ cwceLteProfileIndex Unsigned32,
+ cwceLteProfileType CiscoWanCellExtProtocolType,
+ cwceLteProfileIPv4Addr InetAddress,
+ cwceLteProfileIPv6Addr InetAddress,
+ cwceLteProfileApn SnmpAdminString,
+ cwceLteProfileApnAmbr Unsigned32,
+ cwceLteProfileStorage StorageType,
+ cwceLteProfileRowStatus RowStatus
+}
+
+cwceLteProfileIndex OBJECT-TYPE
+ SYNTAX Unsigned32 (1..4294967295)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This object specifies profile index, combined with
+ entPhysicalIndex to access profile table."
+ ::= { cwceLteProfileEntry 1 }
+
+cwceLteProfileType OBJECT-TYPE
+ SYNTAX CiscoWanCellExtProtocolType
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object specifies the configured EPS Bearer type."
+ ::= { cwceLteProfileEntry 2 }
+
+cwceLteProfileIPv4Addr OBJECT-TYPE
+ SYNTAX InetAddress
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object specifies the configured EPS Bearer IPv4 address.
+ The type of this address is determined by the value of the
+ cwceLteIpv4AddrType object.
+
+ This object is valid only if the corresponding instance value
+ of cwceLteProfileType is either 'ipv4' or 'ipv4V6'."
+ ::= { cwceLteProfileEntry 3 }
+
+cwceLteProfileIPv6Addr OBJECT-TYPE
+ SYNTAX InetAddress
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object specifies the configured EPS Bearer IPv6 address.
+ The type of this address is determined by the value of the
+ cwceLteIpv6AddrType object.
+
+ This object is valid only if the corresponding instance value
+ of cwceLteProfileType is either 'ipv6' or 'ipv4V6'."
+ ::= { cwceLteProfileEntry 4 }
+
+cwceLteProfileApn OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..64))
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object specifies configured profile of Access Point
+ Name (APN). The value of this object should be provided
+ by the APN service provider."
+ ::= { cwceLteProfileEntry 5 }
+
+cwceLteProfileApnAmbr OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object specifies the profile APN-AMBR.
+ APN-AMBR is aggregate bit rate across all Non-GBR bearers
+ and across all PDN connections of the same APN. The value
+ APN-AMBR is a parameter which is defined as part of a user's
+ subscription, but may be overridden by the PCRF."
+ ::= { cwceLteProfileEntry 6 }
+
+cwceLteProfileStorage OBJECT-TYPE
+ SYNTAX StorageType
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object specifies the storage type for this
+ conceptual row."
+ ::= { cwceLteProfileEntry 7 }
+
+cwceLteProfileRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object specifies the status of the conceptual row.
+ It's used to manage creation, modification and deletion
+ of rows in this table.
+
+ When a row is active, user cannot modify the value of the
+ objects in that row. All objects in this row need to have
+ valid value before the row can be active."
+ ::= { cwceLteProfileEntry 8 }
+
+
+
+cwceLtePdnTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF CwceLtePdnEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table contains Cellular 4G/LTE Packet Data Network(PDN)
+ information of all the PDN capable interfaces in the system."
+ ::= { cwceLteProfile 4 }
+
+cwceLtePdnEntry OBJECT-TYPE
+ SYNTAX CwceLtePdnEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry contains management information of Cellular
+ 4G/LTE PDN parameters.
+
+ An entry of this table is created if an interface capable
+ of providing operational Cellular 4G/LTE PDN parameters
+ is detected by the agent.
+
+ An entry of this table is deleted by the agent if the
+ corresponding entry in ifTable is removed."
+ INDEX { ifIndex }
+ ::= { cwceLtePdnTable 1 }
+
+CwceLtePdnEntry ::= SEQUENCE {
+ cwceLtePdnProfileUsed Unsigned32,
+ cwceLtePdnConnStatus INTEGER,
+ cwceLtePdnType CiscoWanCellExtProtocolType,
+ cwceLtePdnIpv4Addr InetAddress,
+ cwceLtePdnIpv6Addr InetAddress,
+ cwceLtePdnPriDnsIpv4Addr InetAddress,
+ cwceLtePdnSecDnsIpv4Addr InetAddress,
+ cwceLtePdnPriDnsIpv6Addr InetAddress,
+ cwceLtePdnSecDnsIpv6Addr InetAddress
+}
+
+cwceLtePdnProfileUsed OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object indicates the cwceLteProfileIndex of
+ the profile used by current EPS bearer to
+ establish data connection."
+ ::= { cwceLtePdnEntry 2 }
+
+cwceLtePdnConnStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ unknown(1),
+ active(2),
+ inactive(3)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object indicates PDN session status
+ of the profile. This is active when the call is
+ established and PDN context has become active."
+ DEFVAL { inactive }
+ ::= { cwceLtePdnEntry 3 }
+
+cwceLtePdnType OBJECT-TYPE
+ SYNTAX CiscoWanCellExtProtocolType
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object indicates current session PDN type."
+ ::= { cwceLtePdnEntry 4 }
+
+cwceLtePdnIpv4Addr OBJECT-TYPE
+ SYNTAX InetAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object indicates current session
+ EPS Bearer IPv4 address.
+ The type of this address is determined by
+ the value of the cwceLteIpv4AddrType object."
+ ::= { cwceLtePdnEntry 5 }
+
+cwceLtePdnIpv6Addr OBJECT-TYPE
+ SYNTAX InetAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object indicates current session
+ EPS Bearer IPv6 address.
+ The type of this address is determined by
+ the value of the cwceLteIpv6AddrType object."
+ ::= { cwceLtePdnEntry 6 }
+
+cwceLtePdnPriDnsIpv4Addr OBJECT-TYPE
+ SYNTAX InetAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object indicates current session
+ EPS Bearer Primary DNS IPv4 address.
+ The type of this address is determined by
+ the value of the cwceLteIpv4AddrType object."
+ ::= { cwceLtePdnEntry 7 }
+
+cwceLtePdnSecDnsIpv4Addr OBJECT-TYPE
+ SYNTAX InetAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object indicates current session
+ EPS Bearer Secondary DNS IPv4 address.
+ The type of this address is determined by
+ the value of the cwceLteIpv4AddrType object."
+ ::= { cwceLtePdnEntry 8 }
+
+cwceLtePdnPriDnsIpv6Addr OBJECT-TYPE
+ SYNTAX InetAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object indicates current session
+ EPS Bearer Primary DNS IPv6 address.
+ The type of this address is determined by
+ the value of the cwceLteIpv6AddrType object."
+ ::= { cwceLtePdnEntry 9 }
+
+cwceLtePdnSecDnsIpv6Addr OBJECT-TYPE
+ SYNTAX InetAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object indicates current session
+ EPS Bearer Secondary DNS IPv6 address.
+ The type of this address is determined by
+ the value of the cwceLteIpv6AddrType object."
+ ::= { cwceLtePdnEntry 10 }
+
+
+
+cwceLteEpsBearerQosTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF CwceLteEpsBearerQosEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table contains 4G/LTE QoS parameters
+ requested by modem to the cellular network
+ via PDN Context Activation Request message."
+ ::= { cwceLteProfile 5 }
+
+cwceLteEpsBearerQosEntry OBJECT-TYPE
+ SYNTAX CwceLteEpsBearerQosEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry contains management information of Cellular
+ 4G/LTE QoS parameters.
+
+ An entry of this table is created if an interface
+ capable of providing operational Cellular 4G/LTE
+ QoS parameters is detected by the agent.
+
+ An entry of this table is deleted by the agent
+ if the corresponding entry in ifTable is removed."
+ INDEX {
+ ifIndex,
+ cwceLteEpsBearerId
+ }
+ ::= { cwceLteEpsBearerQosTable 1 }
+
+CwceLteEpsBearerQosEntry ::= SEQUENCE {
+ cwceLteEpsBearerId Unsigned32,
+ cwceLteEpsBearerType INTEGER,
+ cwceLteEpsQCI Unsigned32,
+ cwceLteEpsArp Unsigned32,
+ cwceLteEpsBearerResType INTEGER,
+ cwceLteEpsGbr Unsigned32,
+ cwceLteEpsMbr Unsigned32,
+ cwceLteEpsAmbr Unsigned32,
+ cwceLteEpsTotalBytesTx Counter64,
+ cwceLteEpsTotalBytesRx Counter64,
+ cwceLteEpsPacketsTx Counter64,
+ cwceLteEpsPacketsRx Counter64
+}
+
+cwceLteEpsBearerId OBJECT-TYPE
+ SYNTAX Unsigned32 (1..4294967295)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This object indicates the EPS Bearer Identity which is
+ allocated by the Mobility Management Entity (MME)."
+ ::= { cwceLteEpsBearerQosEntry 1 }
+
+cwceLteEpsBearerType OBJECT-TYPE
+ SYNTAX INTEGER {
+ gbr(1),
+ nonGbr(2),
+ unknown(3)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object indicates the type of bearers.
+
+ gbr - Guaranteed Bit Rate(GBR).
+ GBR bearer has a minimum amount of bandwidth that
+ is reserved by the network, and these resources are
+ always consumed in a radio base station regardless
+ of whether it is used or not.
+
+ nonGbr - non-Guaranteed Bit Rate(Non-GBR).
+ Non-GBR bearers are for best-effort services and do
+ not consume any network
+ resources.
+
+ unknown - the type of bearers is unknown."
+ ::= { cwceLteEpsBearerQosEntry 2 }
+
+cwceLteEpsQCI OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object indicates the QoS Class Identifier(QCI).
+ The QCI along with the ARP characterizes the QoS of
+ the bearer."
+ ::= { cwceLteEpsBearerQosEntry 3 }
+
+cwceLteEpsArp OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object indicates the Allocation and Retention
+ Priority(ARP).
+ ARP is a QoS parameter designed to facilitate decisions
+ as to whether a bearer establishment/modification request
+ can be accepted."
+ ::= { cwceLteEpsBearerQosEntry 4 }
+
+cwceLteEpsBearerResType OBJECT-TYPE
+ SYNTAX INTEGER {
+ defaultBearer(1),
+ dedicatedBearer(2),
+ unknown(3)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object indicates the Bearer resource type."
+ ::= { cwceLteEpsBearerQosEntry 5 }
+
+cwceLteEpsGbr OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object indicates the Guaranteed Bit Rate(GBR) which
+ determines the resource reservation to guarantee a
+ given data rate."
+ ::= { cwceLteEpsBearerQosEntry 6 }
+
+cwceLteEpsMbr OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object indicates the Maximum Bit Rate(MBR) which is
+ used for policing the user traffic."
+ ::= { cwceLteEpsBearerQosEntry 7 }
+
+cwceLteEpsAmbr OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object indicates the Aggregated Maximum Bit Rate.
+ This object is valid only if the value of the corresponding
+ cwceLteEpsBearerResType is 'defaultBearer'."
+ ::= { cwceLteEpsBearerQosEntry 8 }
+
+cwceLteEpsTotalBytesTx OBJECT-TYPE
+ SYNTAX Counter64
+ UNITS "bytes"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object indicates the total data bytes transmitted
+ by this bearer."
+ ::= { cwceLteEpsBearerQosEntry 9 }
+
+cwceLteEpsTotalBytesRx OBJECT-TYPE
+ SYNTAX Counter64
+ UNITS "bytes"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object indicates the total data bytes received
+ by this bearer."
+ ::= { cwceLteEpsBearerQosEntry 10 }
+
+cwceLteEpsPacketsTx OBJECT-TYPE
+ SYNTAX Counter64
+ UNITS "packets"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object indicates the number of packets transmitted
+ by this bearer."
+ ::= { cwceLteEpsBearerQosEntry 11 }
+
+cwceLteEpsPacketsRx OBJECT-TYPE
+ SYNTAX Counter64
+ UNITS "packets"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object indicates the number of packets received
+ by this bearer."
+ ::= { cwceLteEpsBearerQosEntry 12 }
+
+
+
+cwceLteRsrqOnsetNotif NOTIFICATION-TYPE
+ OBJECTS {
+ entPhysicalName,
+ cwceLteRsrqOnsetNotifFlag,
+ cwceLteNotifRsrq,
+ cwceLteRsrqOnsetNotifThreshold
+ }
+ STATUS current
+ DESCRIPTION
+ "If RSRQ goes below cwceLteRsrqOnsetNotifThreshold
+ and the service bit in cwceLteRsrqOnsetNotifFlag
+ is set, this notification will be generated. Object
+ cwceLteRsrqOnsetNotifFlag will indicate which service
+ generates this notification and the associated RSRQ
+ will be reported in cwceLteNotifRsrq. Please note
+ that cwceLteNotifRsrq is used to indicate the
+ RSRQ value that triggers the notification, user
+ should go to the corresponding radio table to
+ get the current RSRQ value."
+ ::= { ciscoWanCellExtMIBNotifs 1 }
+
+cwceLteRsrqAbateNotif NOTIFICATION-TYPE
+ OBJECTS {
+ entPhysicalName,
+ cwceLteRsrqAbateNotifFlag,
+ cwceLteNotifRsrq,
+ cwceLteRsrqAbateNotifThreshold
+ }
+ STATUS current
+ DESCRIPTION
+ "If RSRQ goes above cwceLteRsrqAbateNotifThreshold
+ and the service bit in cwceLteRsrqOnsetNotifFlag
+ is set, this notification will be generated. Object
+ cwceLteRsrqAbateNotifFlag will indicate which service
+ generates this notification and the associated RSRQ
+ will be reported in cwceLteNotifRsrq. Please
+ note that cwceLteNotifRsrq is used to indicate
+ the RSRQ value that triggers the notification,
+ user should go to the corresponding radio table to
+ get the current RSRQ value."
+ ::= { ciscoWanCellExtMIBNotifs 2 }
+
+cwceLteRsrpOnsetNotif NOTIFICATION-TYPE
+ OBJECTS {
+ entPhysicalName,
+ cwceLteRsrpOnsetNotifFlag,
+ cwceLteNotifRsrp,
+ cwceLteRsrpOnsetNotifThreshold
+ }
+ STATUS current
+ DESCRIPTION
+ "If RSRP goes below cwceLteRsrpOnsetNotifThreshold
+ and the service bit in cwceLteRsrpOnsetNotifFlag
+ is set, this notification will be generated. Object
+ cwceLteRsrpOnsetNotifFlag will indicate which service
+ generates this notification and the associated RSRP
+ will be reported in cwceLteNotifRsrp. Please
+ note that cwceLteNotifRsrp is used to indicate
+ the RSRP value that triggers the notification,
+ user should go to the
+ corresponding radio table to get the current RSRP
+ value."
+ ::= { ciscoWanCellExtMIBNotifs 3 }
+
+cwceLteRsrpAbateNotif NOTIFICATION-TYPE
+ OBJECTS {
+ entPhysicalName,
+ cwceLteRsrpAbateNotifFlag,
+ cwceLteNotifRsrp,
+ cwceLteRsrpAbateNotifThreshold
+ }
+ STATUS current
+ DESCRIPTION
+ "If RSRP goes above cwceLteRsrqAbateNotifThreshold
+ and the service bit in cwceLteRsrpOnsetNotifFlag
+ is set, this notification will be generated. Object
+ cwceLteRsrpAbateNotifFlag will indicate which service
+ generates this notification and the associated RSRP
+ will be reported in cwceLteNotifRsrp. Please
+ note that cwceLteNotifRsrp is used to indicate
+ the RSRP value that triggers the notification,
+ user should go to the corresponding radio table to
+ get the current RSRP value."
+ ::= { ciscoWanCellExtMIBNotifs 4 }
+-- Conformance
+
+ciscoWanCellExtMIBCompliances OBJECT IDENTIFIER
+ ::= { ciscoWanCellExtMIBConform 1 }
+
+ciscoWanCellExtMIBGroups OBJECT IDENTIFIER
+ ::= { ciscoWanCellExtMIBConform 2 }
+
+
+ciscoWanCellExtMIBCompliance MODULE-COMPLIANCE
+ STATUS current
+ DESCRIPTION
+ "The compliance statement for the
+ CISCO-WAN-CELL-EXT-MIB."
+ MODULE -- this module
+ MANDATORY-GROUPS {
+ ciscoWanCellExtMIBNotificationGroup,
+ ciscoWanCellExtMIBLteObjectGroup
+ }
+
+ OBJECT cwceLteRsrpOnsetNotifThreshold
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "Write access is not required."
+
+ OBJECT cwceLteRsrpAbateNotifThreshold
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "Write access is not required."
+
+ OBJECT cwceLteRsrqOnsetNotifThreshold
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "Write access is not required."
+
+ OBJECT cwceLteRsrqAbateNotifThreshold
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "Write access is not required."
+
+ OBJECT cwceLteRsrpOnsetNotifFlag
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "Write access is not required."
+
+ OBJECT cwceLteRsrpAbateNotifFlag
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "Write access is not required."
+
+ OBJECT cwceLteRsrqOnsetNotifFlag
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "Write access is not required."
+
+ OBJECT cwceLteRsrqAbateNotifFlag
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "Write access is not required."
+
+ OBJECT cwceLteProfileType
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "read-create access is not required."
+
+ OBJECT cwceLteProfileIPv4Addr
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "read-create access is not required."
+
+ OBJECT cwceLteProfileIPv6Addr
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "read-create access is not required."
+
+ OBJECT cwceLteProfileApn
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "read-create access is not required."
+
+ OBJECT cwceLteProfileApnAmbr
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "read-create access is not required."
+
+ OBJECT cwceLteProfileStorage
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "read-create access is not required."
+
+ OBJECT cwceLteProfileRowStatus
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "read-create access is not required."
+ ::= { ciscoWanCellExtMIBCompliances 1 }
+
+ciscoWanCellExtMIBLteObjectGroup OBJECT-GROUP
+ OBJECTS {
+ cwceLteCurrRsrp,
+ cwceLteCurrRsrq,
+ cwceLteCurrSnr,
+ cwceLteCurrSinr,
+ cwceLteCurrCqiIndex,
+ cwceLteNotifRsrp,
+ cwceLteNotifRsrq,
+ cwceLteRsrpOnsetNotifThreshold,
+ cwceLteRsrpAbateNotifThreshold,
+ cwceLteRsrqOnsetNotifThreshold,
+ cwceLteRsrqAbateNotifThreshold,
+ cwceLteRsrpOnsetNotifFlag,
+ cwceLteRsrpAbateNotifFlag,
+ cwceLteRsrqOnsetNotifFlag,
+ cwceLteRsrqAbateNotifFlag,
+ cwceLteCurrOperatingBand,
+ cwceLteRadioHistoryRsrpPerSecond,
+ cwceLteRadioHistoryRsrpPerMinute,
+ cwceLteRadioHistoryRsrpPerHour,
+ cwceLteRadioHistoryRsrqPerSecond,
+ cwceLteRadioHistoryRsrqPerMinute,
+ cwceLteRadioHistoryRsrqPerHour,
+ cwceLteIpv4AddrType,
+ cwceLteIpv6AddrType,
+ cwceLteProfileType,
+ cwceLteProfileIPv4Addr,
+ cwceLteProfileIPv6Addr,
+ cwceLteProfileApn,
+ cwceLteProfileApnAmbr,
+ cwceLteProfileStorage,
+ cwceLteProfileRowStatus,
+ cwceLtePdnProfileUsed,
+ cwceLtePdnConnStatus,
+ cwceLtePdnType,
+ cwceLtePdnIpv4Addr,
+ cwceLtePdnIpv6Addr,
+ cwceLtePdnPriDnsIpv4Addr,
+ cwceLtePdnSecDnsIpv4Addr,
+ cwceLtePdnPriDnsIpv6Addr,
+ cwceLtePdnSecDnsIpv6Addr,
+ cwceLteEpsBearerType,
+ cwceLteEpsArp,
+ cwceLteEpsQCI,
+ cwceLteEpsBearerResType,
+ cwceLteEpsGbr,
+ cwceLteEpsMbr,
+ cwceLteEpsAmbr,
+ cwceLteEpsTotalBytesTx,
+ cwceLteEpsTotalBytesRx,
+ cwceLteEpsPacketsTx,
+ cwceLteEpsPacketsRx
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects for Cellular 4G/LTE."
+ ::= { ciscoWanCellExtMIBGroups 1 }
+
+ciscoWanCellExtMIBNotificationGroup NOTIFICATION-GROUP
+ NOTIFICATIONS {
+ cwceLteRsrqOnsetNotif,
+ cwceLteRsrqAbateNotif,
+ cwceLteRsrpOnsetNotif,
+ cwceLteRsrpAbateNotif
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects for Cellular WAN
+ notifications."
+ ::= { ciscoWanCellExtMIBGroups 2 }
+
+END
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
generated by cgit v1.2.3 (git 2.46.0) at 2026-02-26 13:24:16 +0000