diff options
Diffstat (limited to 'MIBS/cisco/CISCO-ENTITY-DISPLAY-MIB')
| -rw-r--r-- | MIBS/cisco/CISCO-ENTITY-DISPLAY-MIB | 365 |
1 files changed, 365 insertions, 0 deletions
diff --git a/MIBS/cisco/CISCO-ENTITY-DISPLAY-MIB b/MIBS/cisco/CISCO-ENTITY-DISPLAY-MIB new file mode 100644 index 0000000..78eaf63 --- /dev/null +++ b/MIBS/cisco/CISCO-ENTITY-DISPLAY-MIB @@ -0,0 +1,365 @@ +-- ***************************************************************** +-- CISCO-ENTITY-DISPLAY-MIB: Cisco Entity DISPLAY MIB file +-- +-- Jan 2003, Arvind Prabhudev, Mickey Spiegel, Sonal Maheshwari +-- +-- Copyright (c) 2003, 2009 by Cisco Systems, Inc. +-- All rights reserved. +-- ***************************************************************** + +CISCO-ENTITY-DISPLAY-MIB DEFINITIONS ::= BEGIN + +IMPORTS + Unsigned32, + MODULE-IDENTITY, + OBJECT-TYPE + FROM SNMPv2-SMI + MODULE-COMPLIANCE, + OBJECT-GROUP + FROM SNMPv2-CONF + TEXTUAL-CONVENTION, + TruthValue + FROM SNMPv2-TC + SnmpAdminString + FROM SNMP-FRAMEWORK-MIB + entPhysicalIndex + FROM ENTITY-MIB + ciscoMgmt + FROM CISCO-SMI; + + +ciscoEntityDisplayMIB MODULE-IDENTITY + LAST-UPDATED "200910050000Z" + ORGANIZATION "Cisco Systems, Inc." + CONTACT-INFO + "Cisco Systems + Customer Service + + Postal: 170 W Tasman Drive + San Jose, CA 95134 + USA + + Tel: +1 800 553-NETS + + E-mail: cs-displaymib@cisco.com" + DESCRIPTION + "This MIB module provides information about the + status of display devices such as Light Emitting + Diodes (LEDs) and alphanumeric displays present + on the physical entities contained by the managed + system." + REVISION "200910050000Z" + DESCRIPTION + "Added the enumeration 'greenAndAmber' to + CDisplayColor TEXTUAL-CONVENTION. + Added support for ceDisplayBeaconGroup." + REVISION "200303200000Z" + DESCRIPTION + "Initial version of this MIB." + ::= { ciscoMgmt 344 } + + + +-- Textual Conventions + +CDisplayType ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "An integer value that indicates the type of + display device." + SYNTAX INTEGER { + led(1), + alphanumeric(2) + } + +CDisplayColor ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "An integer value that describes the color of the + display. + + 'greenAndAmber' - Indicates that the display color + toggles between green and amber." + SYNTAX INTEGER { + unknown(1), + white(2), + red(3), + green(4), + yellow(5), + amber(6), + blue(7), + greenAndAmber(8) + } + +CDisplayState ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "An integer value that describes the state of the + display." + SYNTAX INTEGER { + unknown(1), + off(2), + on(3), + blinking(4) + } +-- MIB Object Definitions + +ciscoEntityDisplayMIBObjects OBJECT IDENTIFIER + ::= { ciscoEntityDisplayMIB 1 } + +-- This table contains current display status information. + +ceDisplayTable OBJECT-TYPE + SYNTAX SEQUENCE OF CeDisplayEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table provides information about the display + devices on the physical entities in the managed + system and their current display status." + ::= { ciscoEntityDisplayMIBObjects 1 } + +ceDisplayEntry OBJECT-TYPE + SYNTAX CeDisplayEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in the ceDisplayTable that provides + information about an LED or an alphanumeric display + in the system including its current display status." + INDEX { + entPhysicalIndex, + ceDisplayIndex + } + ::= { ceDisplayTable 1 } + +CeDisplayEntry ::= SEQUENCE { + ceDisplayIndex Unsigned32, + ceDisplayType CDisplayType, + ceDisplayName SnmpAdminString, + ceDisplayState CDisplayState, + ceDisplayColor CDisplayColor, + ceDisplayText SnmpAdminString +} + +ceDisplayIndex OBJECT-TYPE + SYNTAX Unsigned32 (1..1024) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An arbitrary index that uniquely identifies an LED or + an alphanumeric display on the physical entity + identified by entPhysicalIndex." + ::= { ceDisplayEntry 1 } + +ceDisplayType OBJECT-TYPE + SYNTAX CDisplayType + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object indicates the type of display described + in this entry. i.e. whether it is an LED display or + an alphanumeric display." + ::= { ceDisplayEntry 2 } + +ceDisplayName OBJECT-TYPE + SYNTAX SnmpAdminString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object provides a human-readable string which is + the name for the display device specified in this entry." + ::= { ceDisplayEntry 3 } + +ceDisplayState OBJECT-TYPE + SYNTAX CDisplayState + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object indicates the current display state for + the display specified in this entry." + ::= { ceDisplayEntry 4 } + +ceDisplayColor OBJECT-TYPE + SYNTAX CDisplayColor + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object indicates the color currently seen on + the display specified in this entry. If the display + specified by this entry is an alphanumeric display, + i.e. ceDisplayType is of type 'alphanumeric' then, + color may not apply and the agent may choose to + indicate this by setting this object to 'unknown'." + ::= { ceDisplayEntry 5 } + +ceDisplayText OBJECT-TYPE + SYNTAX SnmpAdminString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object provides a human-readable string which is + the text currently displayed in the alphanumeric display + specified in this entry. If the display specified by + this entry is an LED, i.e. ceDisplayType is of type 'led' + then, this object would be an empty string." + ::= { ceDisplayEntry 6 } + + + +ceDisplayBeaconTable OBJECT-TYPE + SYNTAX SEQUENCE OF CeDisplayBeaconEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table provides functionality to manage + beacon display devices in the managed system." + ::= { ciscoEntityDisplayMIBObjects 2 } + +ceDisplayBeaconEntry OBJECT-TYPE + SYNTAX CeDisplayBeaconEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry containing management information of + beacon functionality of a particular beacon + display device. + + Only those display devices, as specified by + entPhysicalIndex in ENTITY-MIB, that support + beacon functionality will be populated in this + table." + INDEX { + entPhysicalIndex, + ceDisplayIndex + } + ::= { ceDisplayBeaconTable 1 } + +CeDisplayBeaconEntry ::= SEQUENCE { + ceDisplayBeaconEnabled TruthValue +} + +ceDisplayBeaconEnabled OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object specifies if the beacon functionality is + administratively enabled for this display device. + + 'true' - beacon functionality is administratively + enabled + 'false' - beacon functionality is administratively + disabled." + ::= { ceDisplayBeaconEntry 1 } + + +-- MIB Conformance Information + +ceDisplayMIBConformance OBJECT IDENTIFIER + ::= { ciscoEntityDisplayMIB 2 } + +ceDisplayMIBCompliances OBJECT IDENTIFIER + ::= { ceDisplayMIBConformance 1 } + +ceDisplayMIBGroups OBJECT IDENTIFIER + ::= { ceDisplayMIBConformance 2 } + + +-- Compliance Statements + +ceDisplayMIBCompliance MODULE-COMPLIANCE + STATUS deprecated + DESCRIPTION + "The compliance statement for entities that implement the + CISCO-ENTITY-DISPLAY-MIB. + + This compliance statement is deprecated and superceded by + ceDisplayMIBCompliance2." + MODULE -- this module + MANDATORY-GROUPS { ceDisplayGroup } + + GROUP ceDisplayLEDGroup + DESCRIPTION + "This group is required when the display entity is an + LED." + + GROUP ceDisplayAlphaNumericGroup + DESCRIPTION + "This group is required when the display entity is an + alphanumeric display." + ::= { ceDisplayMIBCompliances 1 } + +ceDisplayMIBCompliance2 MODULE-COMPLIANCE + STATUS current + DESCRIPTION + "The compliance statement for entities that implement the + CISCO-ENTITY-DISPLAY-MIB." + MODULE -- this module + MANDATORY-GROUPS { ceDisplayGroup } + + GROUP ceDisplayLEDGroup + DESCRIPTION + "This group is required when the display entity is an + LED." + + GROUP ceDisplayAlphaNumericGroup + DESCRIPTION + "This group is required when the display entity is an + alphanumeric display." + + GROUP ceDisplayBeaconGroup + DESCRIPTION + "This group is required when system supports beacon + functionality." + + OBJECT ceDisplayBeaconEnabled + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required." + ::= { ceDisplayMIBCompliances 2 } + +-- MIB groupings + +ceDisplayGroup OBJECT-GROUP + OBJECTS { + ceDisplayType, + ceDisplayName, + ceDisplayState + } + STATUS current + DESCRIPTION + "A collection of managed objects that provide information + about a display in the system including its current state." + ::= { ceDisplayMIBGroups 1 } + +ceDisplayLEDGroup OBJECT-GROUP + OBJECTS { ceDisplayColor } + STATUS current + DESCRIPTION + "A collection of objects relevant to LED display." + ::= { ceDisplayMIBGroups 2 } + +ceDisplayAlphaNumericGroup OBJECT-GROUP + OBJECTS { ceDisplayText } + STATUS current + DESCRIPTION + "A collection of objects relevant to alphanumeric display." + ::= { ceDisplayMIBGroups 3 } + +ceDisplayBeaconGroup OBJECT-GROUP + OBJECTS { ceDisplayBeaconEnabled } + STATUS current + DESCRIPTION + "A collection of objects relevant to beacon + functionality." + ::= { ceDisplayMIBGroups 4 } + +END + + + + + + + |