diff options
Diffstat (limited to 'MIBS/cisco/CISCO-CAT6K-CROSSBAR-MIB')
| -rw-r--r-- | MIBS/cisco/CISCO-CAT6K-CROSSBAR-MIB | 3028 |
1 files changed, 3028 insertions, 0 deletions
diff --git a/MIBS/cisco/CISCO-CAT6K-CROSSBAR-MIB b/MIBS/cisco/CISCO-CAT6K-CROSSBAR-MIB new file mode 100644 index 0000000..4359a08 --- /dev/null +++ b/MIBS/cisco/CISCO-CAT6K-CROSSBAR-MIB @@ -0,0 +1,3028 @@ +-- ***************************************************************** +-- CISCO-CAT6K-CROSSBAR-MIB.my +-- +-- Mar 2001, Padma Pullela +-- Nov. 2002, Padma Pullela/Lilian Jiang +-- March 2003, Padma Pullela +-- June 2004, Padma Pullela +-- +-- Copyright (c) 2001-2009, 2012-2013 by cisco Systems, Inc. +-- All rights reserved. +-- ***************************************************************** + +CISCO-CAT6K-CROSSBAR-MIB DEFINITIONS ::= BEGIN + +IMPORTS + MODULE-IDENTITY, + OBJECT-TYPE, + Counter32, + Unsigned32, + Gauge32, + NOTIFICATION-TYPE + FROM SNMPv2-SMI + MODULE-COMPLIANCE, + OBJECT-GROUP, + NOTIFICATION-GROUP + FROM SNMPv2-CONF + TEXTUAL-CONVENTION, + TruthValue, + DisplayString, + DateAndTime, + TimeStamp + FROM SNMPv2-TC + entPhysicalName, + entPhysicalVendorType, + entPhysicalIndex, + entPhysicalDescr + FROM ENTITY-MIB + Percent + FROM CISCO-QOS-PIB-MIB + ciscoMgmt + FROM CISCO-SMI; + + +ciscoCat6kCrossbarMIB MODULE-IDENTITY + LAST-UPDATED "201309160000Z" + ORGANIZATION "Cisco Systems, Inc." + CONTACT-INFO + "Cisco Systems + Customer Service + Postal: 170 W Tasman Drive + San Jose, CA 95134 + USA + Tel: +1 800 553-NETS + + E-mail: cs-cat6000@cisco.com" + DESCRIPTION + "The Catalyst 6000 Crossbar MIB provides instrumentation for + configuration and operation of the crossbar switching fabric + module, and additional functionalities for switching bus + and internal bus, etc." + REVISION "201309160000Z" + DESCRIPTION + "Added two new enumerations 'pfc4xxl' and 'pfc4lite' + in cc6kxbarSysCapPfcOperMode." + REVISION "201205310000Z" + DESCRIPTION + "Added following OBJECT-GROUP + - cc6kxbarStatisticsLbusDropGroup + Added new compliance + - cc6kxbarMIBComplianceVer8. + Updated the description for + - cc6kxbarStatisticsPeakTmInUtil + - cc6kxbarStatisticsPeakTmOutUtil." + REVISION "200902150000Z" + DESCRIPTION + "Added cc6kxbarErrRcvryPersLinkResGroup and + cc6kxbarErrRcvryChResyncGroup, + cc6kxbarTMSwBusUtilGroup, + cc6kxbarTMSwBusUtilNotifControlGroup, + cc6kxbarTMSwBusUtilNotifObjectGroup, + cc6kxbarTMSwBusUtilNotifGroup, + cc6kxbarTMChUtilGroup, + cc6kxbarTMChUtilNotifControlGroup, + cc6kxbarTMChUtilNotifObjectGroup, + cc6kxbarTMChUtilNotifGroup. + + Added two new enumerations 'pfc4' and 'pfc4xl' + in cc6kxbarSysCapPfcOperMode. + + Added DISPLAY-HINT in TEXTUAL-CONVENTION + of ModuleSlotNumber and FabricChannelNumber." + REVISION "200712180000Z" + DESCRIPTION + "Added cc6kxbarSysCapPfcOperModeGroup, + cc6kxbarSysCapSwitchResGroup, cc6kxbarChannelUtilGroup1, + cc6kxbarSwBusGroup1, cc6kxbarErrorGroup, + cc6kxbarErrRcvryThresholdGroup and + cc6kxbarErrRcvrySwitchoverGroup." + REVISION "200612190000Z" + DESCRIPTION + "Added cc6kxbarDcefOnlyModeAllowedGroup, + cc6kxbarForceBusModeGroup, + cc6kxbarFlowCtrlNotifCtrlGroup, + cc6kxbarFlowCtrlBusThreshGroup, + cc6kxbarFlowCtrlBusThrNotifGroup + and cc6kxbarBusOnlyModeOperGroup." + REVISION "200411190000Z" + DESCRIPTION + "Added cc6kxbarIntBusCRCErrGroup." + REVISION "200408110000Z" + DESCRIPTION + "Added cc6kxbarIntBusNotifControlGroup and + cc6kxbarIntBusCRCErrNotifGroup." + REVISION "200406110000Z" + DESCRIPTION + "Added cc6kxbarTruncatedModeOper Object and changed the + description of cc6kxbarTruncatedModeAllowed and + cc6kxbarMinFabricPresent." + REVISION "200309290000Z" + DESCRIPTION + "Changed the description of cc6kxbarTruncatedModeAllowed and + cc6kxbarMinFabricPresent. Removed default value for + cc6kxbarTruncatedModeAllowed." + REVISION "200304020000Z" + DESCRIPTION + "Changed the SYNTAX and description of cc6kxbarMinFabricPresent + and description of cc6kxbarTruncatedModeAllowed." + REVISION "200212050000Z" + DESCRIPTION + "Added cc6kxbarModuleChannelSpeed, cc6kxbarSwBusSwitchingStatus, + cc6kxbarSwBusFailureDuration, cc6kxbarSwBusNotifEnable + objects and cc6kxbarSwBusStallNotif notification." + REVISION "200106250000Z" + DESCRIPTION + "Initial version of this MIB module." + ::= { ciscoMgmt 217 } + + +ciscoCat6kXbarMIBObjects OBJECT IDENTIFIER + ::= { ciscoCat6kCrossbarMIB 1 } + +cc6kxbarConfiguration OBJECT IDENTIFIER + ::= { ciscoCat6kXbarMIBObjects 1 } + +cc6kxbarStatus OBJECT IDENTIFIER + ::= { ciscoCat6kXbarMIBObjects 2 } + +cc6kxbarStatistics OBJECT IDENTIFIER + ::= { ciscoCat6kXbarMIBObjects 3 } + +cc6kxbarSwBusObjects OBJECT IDENTIFIER + ::= { ciscoCat6kXbarMIBObjects 4 } + +cc6kxbarIntBusObjects OBJECT IDENTIFIER + ::= { ciscoCat6kXbarMIBObjects 5 } + +cc6kxbarFlowCtrlObjects OBJECT IDENTIFIER + ::= { ciscoCat6kXbarMIBObjects 6 } + +cc6kxbarSystemCapacityObjects OBJECT IDENTIFIER + ::= { ciscoCat6kXbarMIBObjects 7 } + +cc6kxbarErrorRecoveryObjects OBJECT IDENTIFIER + ::= { ciscoCat6kXbarMIBObjects 8 } + +cc6kxbarTrafficMonitorObjects OBJECT IDENTIFIER + ::= { ciscoCat6kXbarMIBObjects 9 } + +cc6kxbarTrafficMonitorSwBusObjects OBJECT IDENTIFIER + ::= { cc6kxbarTrafficMonitorObjects 1 } + +cc6kxbarTrafficMonitorChObjects OBJECT IDENTIFIER + ::= { cc6kxbarTrafficMonitorObjects 2 } + + +-- Textual Conventions + +ModuleSlotNumber ::= TEXTUAL-CONVENTION + DISPLAY-HINT "d" + STATUS current + DESCRIPTION + "Slot number of the module." + SYNTAX Unsigned32 + +FabricChannelNumber ::= TEXTUAL-CONVENTION + DISPLAY-HINT "d" + STATUS current + DESCRIPTION + "Fabric channel number." + SYNTAX Unsigned32 + +ChannelStatus ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Status of the Channel." + SYNTAX INTEGER { + ok(1), + syncError(2), + heartbeatError(3), + crcError(4), + bufferError(5), + timeoutError(6), + unused(7) + } + +-- Configuration objects + +cc6kxbarFallbackMode OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "cc6kxbarFallbackMode controls system fallback to bus-mode + after loss of switching fabric module. + 'true' - When the last fabric card is removed + system will adjust the supervisor and + line cards switching mode automatically without + resetting the system. With this feature enabled, + the switch might lose traffic while it's + changing the switching mode. + 'false' - All the ports in the system will be + disabled when the last fabric card is removed." + DEFVAL { true } + ::= { cc6kxbarConfiguration 1 } + +cc6kxbarBusOnlyModeAllowed OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Indicates whether bus mode is administratively enabled on + the device or not." + ::= { cc6kxbarConfiguration 2 } + +cc6kxbarTruncatedModeAllowed OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Indicates whether truncated mode is + administratively enabled on the device or not." + ::= { cc6kxbarConfiguration 3 } + +cc6kxbarMinFabricPresent OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object indicates the minimum number + of switching fabric capable modules to be present in the + system, for any switching fabric capable module to be in + 'crossbarmode' indicated by cc6kxbarModuleModeSwitchingMode, + when cc6kxbarTruncatedModeOper is 'false'." + ::= { cc6kxbarConfiguration 4 } + +cc6kxbarLcdBannerTable OBJECT-TYPE + SYNTAX SEQUENCE OF Cc6kxbarLcdBannerEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "cc6kxbarLcdBannerTable configures the Lcd banner of the + fabric module." + ::= { cc6kxbarConfiguration 5 } + +cc6kxbarLcdBannerEntry OBJECT-TYPE + SYNTAX Cc6kxbarLcdBannerEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in cc6kxbarLcdBannerTable. + Entries are created by the agent based on the + size of the lcd banner." + INDEX { cc6kxbarLcdBannerIndex } + ::= { cc6kxbarLcdBannerTable 1 } + +Cc6kxbarLcdBannerEntry ::= SEQUENCE { + cc6kxbarLcdBannerIndex Unsigned32, + cc6kxbarLcdBannerBanner DisplayString, + cc6kxbarLcdBannerMaxSize Unsigned32 +} + +cc6kxbarLcdBannerIndex OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Object which specifies a unique entry in the + table." + ::= { cc6kxbarLcdBannerEntry 1 } + +cc6kxbarLcdBannerBanner OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Message that would be displayed on the fabric card LCD. + The size of cc6kxbarLcdBannerBanner should be less than + or equal to the cc6kxbarLcdBannerMaxSize value." + ::= { cc6kxbarLcdBannerEntry 2 } + +cc6kxbarLcdBannerMaxSize OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Maximum size of the associated cc6kxbarLcdBannerBanner + object." + ::= { cc6kxbarLcdBannerEntry 3 } + + + +cc6kxbarTruncatedModeOper OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates if the truncated mode is + operationally enabled on the device or not. + 'true' - With the fabric module present in the system, + cc6kxbarModuleModeSwitchingMode will be + 'crossbarmode' for all the fabric capable + modules. + 'false'- With the cc6kxbarMinFabricPresent fabric capable + modules and the fabric module present in the system, + cc6kxbarModuleModeSwitchingMode + will be 'crossbarmode' for fabric capable modules." + ::= { cc6kxbarConfiguration 6 } + +cc6kxbarDcefOnlyModeAllowed OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Indicates whether the dcef mode is enabled on the standby + supervisor or not. + 'true' - Setting cc6kxbarDcefOnlyModeAllowed to 'true' + makes the cc6kxbarModuleModeSwitchingMode of + all the active modules to 'dcefmode'. + With the active fabric module present in the system, + with the switch being in stateful switchover mode, + with all the cards that has no distributed Cisco + Express forwarding switching support being + powered down and on some platforms with standby + supervisor ports being shutdown, changing + cc6kxbarDcefOnlyModeAllowed to 'true' will make the + standby supervisor module reloaded and booted up + as distributed forwarding module. + 'false'- Setting cc6kxbarDcefOnlyModeAllowed to 'false' + makes the cc6kxbarModuleModeSwitchingMode of the + standby supervisor module to the default value. + Changing cc6kxbarDcefOnlyModeAllowed to 'false' + will make the standby supervisor reloaded and booted + up with the default cc6kxbarModuleModeSwitchingMode." + ::= { cc6kxbarConfiguration 7 } + +cc6kxbarForceBusMode OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Indicates whether some affected modules are forced to be in + 'busmode' or not. + 'true' - Setting cc6kxbarForceBusMode to 'true' makes the + cc6kxbarModuleModeSwitchingMode of all + the affected modules to 'busmode'. Changing the + cc6kxbarForceBusMode to 'true' will make all the + affected modules reloaded and booted up as + non fabric capable modules. + 'false'- Setting cc6kxbarForceBusMode to 'false' makes the + cc6kxbarModuleModeSwitchingMode of all the affected + modules to the default value. Changing + cc6kxbarForceBusMode to 'false' will make all the + affected modules reloaded and booted up with the + default cc6kxbarModuleModeSwitchingMode." + ::= { cc6kxbarConfiguration 8 } + +cc6kxbarBusOnlyModeOper OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates if the bus mode is operationally enabled on the + device or not. + + 'true' - Modules are allowed to run in 'busmode'. + 'false' - None of the modules are allowed to run in 'busmode' + i.e., All the non-fabric capable modules will + be powered off. Absence of fabric module results + in all the fabric capable modules being powered + off." + ::= { cc6kxbarConfiguration 9 } + +-- Status objects + +cc6kxbarFabricActiveSlot OBJECT-TYPE + SYNTAX ModuleSlotNumber + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "cc6kxbarFabricActiveSlot indicates the slot number of the + active switching fabric module. A value of zero indicates + that the active switching fabric module is either powered + down or not present in the chassis." + ::= { cc6kxbarStatus 1 } + +cc6kxbarFabricBackupSlot OBJECT-TYPE + SYNTAX ModuleSlotNumber + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "cc6kxbarFabricBackupSlot indicates the slot number of the + backup switching fabric module. A value of zero indicates + that the backup switching fabric module is either powered + down or not present in the chassis." + ::= { cc6kxbarStatus 2 } + +cc6kxbarModuleModeTable OBJECT-TYPE + SYNTAX SEQUENCE OF Cc6kxbarModuleModeEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "cc6kxbarModuleModeTable indicates the switching mode of each + module in the system." + ::= { cc6kxbarStatus 3 } + +cc6kxbarModuleModeEntry OBJECT-TYPE + SYNTAX Cc6kxbarModuleModeEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in cc6kxbarModuleModeTable. The agent creates + an entry when a non switching fabric module + is inserted in the chassis. + The agent destroys an entry when a non switching fabric + module is power down or reset or removed from the chassis." + INDEX { cc6kxbarModuleModeModule } + ::= { cc6kxbarModuleModeTable 1 } + +Cc6kxbarModuleModeEntry ::= SEQUENCE { + cc6kxbarModuleModeModule ModuleSlotNumber, + cc6kxbarModuleModeSwitchingMode INTEGER +} + +cc6kxbarModuleModeModule OBJECT-TYPE + SYNTAX ModuleSlotNumber + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The module slot number." + ::= { cc6kxbarModuleModeEntry 1 } + +cc6kxbarModuleModeSwitchingMode OBJECT-TYPE + SYNTAX INTEGER { + busmode(1), + crossbarmode(2), + dcefmode(3) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "cc6kxbarModuleModeSwitchingMode indicates switching mode + of the cc6kxbarModuleModeModule. + 'busmode' - Modules in this mode don't use fabric. + Backplane is used for both lookup and data + forwarding. + 'crossbarmode' - Modules in this mode use backplane + for forwarding decision and fabric for data + forwarding + 'dcefmode' - Modules in this mode use fabric for data + forwarding and local forwarding is enabled." + ::= { cc6kxbarModuleModeEntry 2 } + + + +cc6kxbarModuleChannelTable OBJECT-TYPE + SYNTAX SEQUENCE OF Cc6kxbarModuleChannelEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "cc6kxbarModuleChannelTable shows the operational status + of fabric channels. This table will be instantiated only when + cc6kxbarFabricActiveSlot has a valid value other than zero." + ::= { cc6kxbarStatus 4 } + +cc6kxbarModuleChannelEntry OBJECT-TYPE + SYNTAX Cc6kxbarModuleChannelEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in cc6kxbarModuleChannelTable." + INDEX { + cc6kxbarModuleChannelModule, + cc6kxbarModuleChannelChannel + } + ::= { cc6kxbarModuleChannelTable 1 } + +Cc6kxbarModuleChannelEntry ::= SEQUENCE { + cc6kxbarModuleChannelModule ModuleSlotNumber, + cc6kxbarModuleChannelChannel FabricChannelNumber, + cc6kxbarModuleChannelModStatus ChannelStatus, + cc6kxbarModuleChannelFabStatus ChannelStatus, + cc6kxbarModuleChannelSpeed Gauge32 +} + +cc6kxbarModuleChannelModule OBJECT-TYPE + SYNTAX ModuleSlotNumber + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The module slot number." + ::= { cc6kxbarModuleChannelEntry 1 } + +cc6kxbarModuleChannelChannel OBJECT-TYPE + SYNTAX FabricChannelNumber + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Fabric channel number of the cc6kxbarModuleChannelModule." + ::= { cc6kxbarModuleChannelEntry 2 } + +cc6kxbarModuleChannelModStatus OBJECT-TYPE + SYNTAX ChannelStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The status of the fabric channel at the + cc6kxbarModuleChannelModule." + ::= { cc6kxbarModuleChannelEntry 3 } + +cc6kxbarModuleChannelFabStatus OBJECT-TYPE + SYNTAX ChannelStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The status of the fabric channel at the + cc6kxbarFabricActiveSlot." + ::= { cc6kxbarModuleChannelEntry 4 } + +cc6kxbarModuleChannelSpeed OBJECT-TYPE + SYNTAX Gauge32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The speed in mega bits per second of the + cc6kxbarModuleChannelChannel for cc6kxbarModuleChannelModule." + ::= { cc6kxbarModuleChannelEntry 5 } + + +-- Statistics Objects + +cc6kxbarStatisticsTable OBJECT-TYPE + SYNTAX SEQUENCE OF Cc6kxbarStatisticsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "cc6kxbarStatisticsTable gives the + fabric channel counters and utilization + information. This table will be instantiated when + cc6kxbarFabricActiveSlot has a valid value other than + zero." + ::= { cc6kxbarStatistics 1 } + +cc6kxbarStatisticsEntry OBJECT-TYPE + SYNTAX Cc6kxbarStatisticsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in cc6kxbarStatisticsTable." + INDEX { + cc6kxbarStatisticsModule, + cc6kxbarStatisticsChannel + } + ::= { cc6kxbarStatisticsTable 1 } + +Cc6kxbarStatisticsEntry ::= SEQUENCE { + cc6kxbarStatisticsModule ModuleSlotNumber, + cc6kxbarStatisticsChannel FabricChannelNumber, + cc6kxbarStatisticsInErrors Counter32, + cc6kxbarStatisticsOutErrors Counter32, + cc6kxbarStatisticsOutDropped Counter32, + cc6kxbarStatisticsInUtil Percent, + cc6kxbarStatisticsOutUtil Percent, + cc6kxbarStatisticsPeakInUtil Percent, + cc6kxbarStatisticsPeakTmInUtil DateAndTime, + cc6kxbarStatisticsPeakOutUtil Percent, + cc6kxbarStatisticsPeakTmOutUtil DateAndTime, + cc6kxbarStatisticsLbusDrops Counter32 +} + +cc6kxbarStatisticsModule OBJECT-TYPE + SYNTAX ModuleSlotNumber + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The module slot number." + ::= { cc6kxbarStatisticsEntry 1 } + +cc6kxbarStatisticsChannel OBJECT-TYPE + SYNTAX FabricChannelNumber + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Fabric channel number associated with the + cc6kxbarStatisticsModule." + ::= { cc6kxbarStatisticsEntry 2 } + +cc6kxbarStatisticsInErrors OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of error packets received on + cc6kxbarStatisticsChannel for cc6kxbarStatisticsModule + since this entry was last initialized." + ::= { cc6kxbarStatisticsEntry 3 } + +cc6kxbarStatisticsOutErrors OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of error packets transmitted on + cc6kxbarStatisticsModule through the + cc6kxbarStatisticsChannel since this entry was + last initialized." + ::= { cc6kxbarStatisticsEntry 4 } + +cc6kxbarStatisticsOutDropped OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of dropped packets transmitted on the + cc6kxbarStatisticsChannel for cc6kxbarStatisticsModule + since this entry was last initialized." + ::= { cc6kxbarStatisticsEntry 5 } + +cc6kxbarStatisticsInUtil OBJECT-TYPE + SYNTAX Percent + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Input utilization of the cc6kxbarStatisticsChannel for + cc6kxbarStatisticsModule." + ::= { cc6kxbarStatisticsEntry 6 } + +cc6kxbarStatisticsOutUtil OBJECT-TYPE + SYNTAX Percent + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Output utilization of the cc6kxbarStatisticsChannel for + cc6kxbarStatisticsModule." + ::= { cc6kxbarStatisticsEntry 7 } + +cc6kxbarStatisticsPeakInUtil OBJECT-TYPE + SYNTAX Percent + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates the peak value of cc6kxbarStatisticsInUtil of the + cc6kxbarStatisticsChannel for cc6kxbarStatisticsModule." + ::= { cc6kxbarStatisticsEntry 8 } + +cc6kxbarStatisticsPeakTmInUtil OBJECT-TYPE + SYNTAX DateAndTime + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates the time of most recent change in the corresponding + instance value of cc6kxbarStatisticsPeakInUtil. + + This object contains value 0x0000010100000000 when the + corresponding instance value of cc6kxbarStatisticsPeakInUtil + is '0'." + ::= { cc6kxbarStatisticsEntry 9 } + +cc6kxbarStatisticsPeakOutUtil OBJECT-TYPE + SYNTAX Percent + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates the peak value of cc6kxbarStatisticsOutUtil of the + cc6kxbarStatisticsChannel for cc6kxbarStatisticsModule." + ::= { cc6kxbarStatisticsEntry 10 } + +cc6kxbarStatisticsPeakTmOutUtil OBJECT-TYPE + SYNTAX DateAndTime + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates the time of most recent change in the corresponding + instance value of cc6kxbarStatisticsPeakOutUtil. + + This object contains value 0x0000010100000000 when the + corresponding instance value of cc6kxbarStatisticsPeakOutUtil + is '0'." + ::= { cc6kxbarStatisticsEntry 11 } + +cc6kxbarStatisticsLbusDrops OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object indicates the number of packets that have been + deterministically dropped due to the threshold on the local + bus FIFO, errors and exception conditions." + ::= { cc6kxbarStatisticsEntry 12 } + + + +cc6kxbarErrorTable OBJECT-TYPE + SYNTAX SEQUENCE OF Cc6kxbarErrorEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "cc6kxbarErrorTable provides the fabric channel error + information. This table will be instantiated only when + cc6kxbarFabricActiveSlot has a valid value other than zero." + ::= { cc6kxbarStatistics 2 } + +cc6kxbarErrorEntry OBJECT-TYPE + SYNTAX Cc6kxbarErrorEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in cc6kxbarErrorTable for a specific fabric channel + on a specific module." + INDEX { + cc6kxbarErrorModule, + cc6kxbarErrorChannel + } + ::= { cc6kxbarErrorTable 1 } + +Cc6kxbarErrorEntry ::= SEQUENCE { + cc6kxbarErrorModule ModuleSlotNumber, + cc6kxbarErrorChannel FabricChannelNumber, + cc6kxbarErrorModuleCrc Gauge32, + cc6kxbarErrorModuleHbeat Gauge32, + cc6kxbarErrorModuleSync Gauge32, + cc6kxbarErrorModuleDDRSync Gauge32, + cc6kxbarErrorChannelSync Gauge32, + cc6kxbarErrorChannelBuffer Gauge32, + cc6kxbarErrorChannelTimeout Gauge32 +} + +cc6kxbarErrorModule OBJECT-TYPE + SYNTAX ModuleSlotNumber + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The module slot number." + ::= { cc6kxbarErrorEntry 1 } + +cc6kxbarErrorChannel OBJECT-TYPE + SYNTAX FabricChannelNumber + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Fabric channel number associated with the + cc6kxbarErrorModule." + ::= { cc6kxbarErrorEntry 2 } + +cc6kxbarErrorModuleCrc OBJECT-TYPE + SYNTAX Gauge32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates the total number of CRC error packets for the + cc6kxbarErrorChannel of the cc6kxbarErrorModule." + ::= { cc6kxbarErrorEntry 3 } + +cc6kxbarErrorModuleHbeat OBJECT-TYPE + SYNTAX Gauge32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates the total number of heartbeat misses detected + for the cc6kxbarErrorChannel of the cc6kxbarErrorModule." + ::= { cc6kxbarErrorEntry 4 } + +cc6kxbarErrorModuleSync OBJECT-TYPE + SYNTAX Gauge32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates the total number of times cc6kxbarErrorModule could + not sync to the active switching fabric module." + ::= { cc6kxbarErrorEntry 5 } + +cc6kxbarErrorModuleDDRSync OBJECT-TYPE + SYNTAX Gauge32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates the total number of DDR(Double Data Rate) channel + sync errors for the cc6kxbarErrorChannel of the + cc6kxbarErrorModule." + ::= { cc6kxbarErrorEntry 6 } + +cc6kxbarErrorChannelSync OBJECT-TYPE + SYNTAX Gauge32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates the total number of sync errors received at + cc6kxbarErrorChannel." + ::= { cc6kxbarErrorEntry 7 } + +cc6kxbarErrorChannelBuffer OBJECT-TYPE + SYNTAX Gauge32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates the total number of times the memory buffer for + cc6kxbarErrorChannel of the cc6kxbarErrorModule is full." + ::= { cc6kxbarErrorEntry 8 } + +cc6kxbarErrorChannelTimeout OBJECT-TYPE + SYNTAX Gauge32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates the total number of timeouts for input from + the cc6kxbarErrorChannel of the cc6kxbarErrorModule." + ::= { cc6kxbarErrorEntry 9 } + + + +-- Switching Bus Objects + +cc6kxbarSwBusSwitchingStatus OBJECT-TYPE + SYNTAX INTEGER { + normal(1), + stalled(2), + isolated(3) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates the current switching status of the + switching bus on the system. + + normal -- the switching bus is under normal + packet switching operation. + + stalled -- the switching bus has stopped packet + switching but is still attached to + the system, i.e., the switching bus + is stalled. + + isolated -- the switching bus has stopped packet + switching and is detached from + the system, i.e., the switching bus + is isolated. + + The object is only instantiated on systems which + support switching bus switching detection feature." + ::= { cc6kxbarSwBusObjects 1 } + +cc6kxbarSwBusFailureDuration OBJECT-TYPE + SYNTAX Unsigned32 + UNITS "seconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates the failure duration of the switching + bus since the switching bus has transitioned + out of the normal(1) state as monitored by + cc6kxbarSwBusSwitchingStatus. If the object + value of cc6kxbarSwBusSwitchingStatus is + normal(1), then the object value of + cc6kxbarSwBusFailureDuration should be zero. + + The object is only instantiated on systems which + support switching bus switching detection feature." + ::= { cc6kxbarSwBusObjects 2 } + +cc6kxbarSwBusNotifEnable OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Indicates whether or not the notification + cc6kxbarSwBusStatusChangeNotif should be generated + when there is change in the switching status of the + switching bus as monitored by + cc6kxbarSwBusSwitchingStatus. + + The object is only instantiated on systems which + support switching bus switching detection feature." + ::= { cc6kxbarSwBusObjects 3 } + +cc6kxbarSwBusUtilization OBJECT-TYPE + SYNTAX Percent + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates the percentage of bandwidth utilization + of the switching bus." + ::= { cc6kxbarSwBusObjects 4 } + +cc6kxbarSwBusPeakUtilization OBJECT-TYPE + SYNTAX Percent + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates the peak percentage value of bandwidth + utilization of the switching bus since the system + started." + ::= { cc6kxbarSwBusObjects 5 } + +cc6kxbarSwBusPeakTimeUtil OBJECT-TYPE + SYNTAX DateAndTime + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates the time at which the peak percentage value + of bandwidth utilization of the switching bus value + occurred." + ::= { cc6kxbarSwBusObjects 6 } + +-- Internal Bus Objects + +cc6kxbarIntBusNotifEnable OBJECT-TYPE + SYNTAX BITS { + intBusCRCErrExcd(0), + intBusCRCErrRcvrd(1) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Indicates whether the generation of a specified + notification for internal bus is enabled or not. + If a bit corresponding to a notification is set to + 1, then that notification can be generated. + + intBusCRCErrExcd -- the cc6kxbarIntBusCRCErrExcdNotif + notification. + + intBusCRCErrRcvrd -- the cc6kxbarIntBusCRCErrRcvrdNotif + notification." + ::= { cc6kxbarIntBusObjects 1 } + +cc6kxbarIntBusCRCErrTable OBJECT-TYPE + SYNTAX SEQUENCE OF Cc6kxbarIntBusCRCErrEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table containing internal bus CRC error information + on a list of physical entities (such as modules)." + ::= { cc6kxbarIntBusObjects 2 } + +cc6kxbarIntBusCRCErrEntry OBJECT-TYPE + SYNTAX Cc6kxbarIntBusCRCErrEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry containing internal bus CRC error information + on a physical entity (such as a module)." + INDEX { entPhysicalIndex } + ::= { cc6kxbarIntBusCRCErrTable 1 } + +Cc6kxbarIntBusCRCErrEntry ::= SEQUENCE { + cc6kxbarIntBusCRCErrExcdStatus TruthValue, + cc6kxbarIntBusCRCErrExcdCount Unsigned32 +} + +cc6kxbarIntBusCRCErrExcdStatus OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates whether the internal bus CRC error + on a physical entity is currently exceeding the fatal + threshold or not." + ::= { cc6kxbarIntBusCRCErrEntry 1 } + +cc6kxbarIntBusCRCErrExcdCount OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates the number of times the internal bus CRC + error on a physical entity has exceeded the fatal + threshold." + ::= { cc6kxbarIntBusCRCErrEntry 2 } + + + +-- Flow Control Objects + +cc6kxbarFlowCtrlNotifEnable OBJECT-TYPE + SYNTAX BITS { + busThreshExcd(0) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Specifies whether the generation of a specified + notification for flow control feature is enabled or + not. If a bit corresponding to a notification is set + to one, then that notification can be generated. + + busThreshExcd -- the cc6kxbarFlowCtrlBusThrExcdNotif + notification." + ::= { cc6kxbarFlowCtrlObjects 1 } + +cc6kxbarFlowCtrlBusFIFOThrMode OBJECT-TYPE + SYNTAX INTEGER { + off(1), + on(2), + auto(3) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Specifies the mode configuration of the system bus + flow control FIFO threshold. + + off -- the flow control FIFO threshold is set to the + original value defined by the system. + + on -- the flow control FIFO threshold is set to the + lower value defined by the system. + + auto -- the system starts monitoring the system bus + flow control FIFO threshold and will change the + flow control FIFO threshold from the original + value to the lower value when the system detects + the first occurrence of the threshold exceeding + on a physical entity (such as a module) over + the system allowed limit." + ::= { cc6kxbarFlowCtrlObjects 2 } + +cc6kxbarFlowCtrlBusFIFOThrValue OBJECT-TYPE + SYNTAX INTEGER { + original(1), + lower(2) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates the current value of the system bus flow + control FIFO threshold, whether it is the original + value or the lower value." + ::= { cc6kxbarFlowCtrlObjects 3 } + +cc6kxbarFlowCtrlBusFIFOTransTime OBJECT-TYPE + SYNTAX TimeStamp + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates the value of sysUpTime at the time + that the system bus flow control FIFO threshold + is transitioned to lower value when the object value + of cc6kxbarFlowCtrlBusFIFOThrValue is 'lower'. This + object will take on the value of zero when the object + value of cc6kxbarFlowCtrlBusFIFOThrValue is + 'original'." + ::= { cc6kxbarFlowCtrlObjects 4 } + +-- System Capacity Objects + +cc6kxbarSysCapPfcOperMode OBJECT-TYPE + SYNTAX INTEGER { + unknown(1), + pfc3a(2), + pfc3b(3), + pfc3bxl(4), + pfc3cst1(5), + pfc3cxlst1(6), + pfc3c(7), + pfc3cxl(8), + pfc4(9), + pfc4xl(10), + pfc4xxl(11), + pfc4lite(12) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates the operating mode of the policy feature + card (PFC). + + unknown -- unknown. + + pfc3a -- Policy feature card 3A. + + pfc3b -- Policy feature card 3B. + + pfc3bxl -- Policy feature card 3B XL. + + pfc3cst1 -- Policy feature card 3C ST1. + + pfc3cxlst1 -- Policy feature card 3C XL ST1. + + pfc3c -- Policy feature card 3C. + + pfc3cxl -- Policy feature card 3C XL. + + pfc4 -- Policy feature card 4. + + pfc4xl -- Policy feature card 4 XL. + + pfc4xxl -- Policy feature card 4 XXL. + + pfc4lite -- Policy feature card 4 Lite." + ::= { cc6kxbarSystemCapacityObjects 1 } + +cc6kxbarSysCapSwitchResTable OBJECT-TYPE + SYNTAX SEQUENCE OF Cc6kxbarSysCapSwitchResEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A cc6kxbarSysCapSwitchResTable entry lists + the capacity information of the switching + resources for ENTITY-MIB entPhysicalTable entries + of manageable components with type entPhysicalClass + module(9)." + ::= { cc6kxbarSystemCapacityObjects 2 } + +cc6kxbarSysCapSwitchResEntry OBJECT-TYPE + SYNTAX Cc6kxbarSysCapSwitchResEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A cc6kxbarSysCapSwitchResEntry entry lists + the capacity information of the switching + resources for ENTITY-MIB entPhysicalTable entries + of manageable components with type entPhysicalClass + module(9). + + Entries are created by the agent at the system power-up + or module insertion. + + Entries are deleted by the agent upon module removal." + INDEX { entPhysicalIndex } + ::= { cc6kxbarSysCapSwitchResTable 1 } + +Cc6kxbarSysCapSwitchResEntry ::= SEQUENCE { + cc6kxbarSysCapSwitchResSeries INTEGER, + cc6kxbarSysCapSwitchResCefMode INTEGER +} + +cc6kxbarSysCapSwitchResSeries OBJECT-TYPE + SYNTAX INTEGER { + unknown(1), + supervisor(2), + classic(3), + fabric(4), + dcef720(5), + cef720(6), + dcef256(7), + cef256(8) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates the module series for traffic forwarding options. + + unknown -- unknown. + + supervisor -- supervisor module. + + classic -- classic module. + + fabric -- fabric module. + + dcef720 -- dCEF720 module. + + cef720 -- CEF720 module. + + dcef256 -- dCEF256 module. + + cef256 -- CEF256 module." + ::= { cc6kxbarSysCapSwitchResEntry 1 } + +cc6kxbarSysCapSwitchResCefMode OBJECT-TYPE + SYNTAX INTEGER { + notApplicable(1), + dcef(2), + cef(3) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates the Cisco Express Forwarding (CEF) mode of + the module. + + notApplicable -- not applicable for this module. + + dcef -- distributed CEF. + + cef -- CEF." + ::= { cc6kxbarSysCapSwitchResEntry 2 } + + + +-- Fabric Error Recovery Objects + +cc6kxbarErrRcvryThreshLink OBJECT-TYPE + SYNTAX Unsigned32 (1..4294967295) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Specifies the threshold on fabric link errors occurring + in a channel for the fabric error recovery feature." + ::= { cc6kxbarErrorRecoveryObjects 1 } + +cc6kxbarErrRcvryThreshPersLink OBJECT-TYPE + SYNTAX Unsigned32 (1..4294967295) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Specifies the threshold on persistent fabric link errors + occurring in a channel for the fabric error recovery feature." + ::= { cc6kxbarErrorRecoveryObjects 2 } + +cc6kxbarErrRcvrySwitchoverEnable OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Specifies whether the switchover to the standby fabric module + is enabled or not on the detection of excessive fabric link + errors occurring in a channel for the fabric error recovery + feature." + ::= { cc6kxbarErrorRecoveryObjects 3 } + +cc6kxbarErrRcvryPersLinkResync OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Specifies whether the system will resync the channel or not + on the detection of excessive persistent fabric link errors + in a channel for the fabric error recovery feature." + ::= { cc6kxbarErrorRecoveryObjects 4 } + +cc6kxbarErrRcvryChResyncCount OBJECT-TYPE + SYNTAX Unsigned32 (1..4294967295) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Specifies the consecutive number of times of + channel resync within the time interval as specified + by cc6kxbarErrRcvryChResyncInterval, over which + the channel resync is considered as failure + for the fabric error recovery feature." + ::= { cc6kxbarErrorRecoveryObjects 5 } + +cc6kxbarErrRcvryChResyncInterval OBJECT-TYPE + SYNTAX Unsigned32 (1..4294967295) + UNITS "milliseconds" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Specifies the time interval for the consecutive + counting of channel resync for the fabric error + recovery feature." + ::= { cc6kxbarErrorRecoveryObjects 6 } + +-- Traffic Monitor Objects + +cc6kxbarTMSwBusUtilEnable OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Specifies whether the traffic monitor feature is + enabled on the switching bus or not." + ::= { cc6kxbarTrafficMonitorSwBusObjects 1 } + +cc6kxbarTMSwBusUtilInterval OBJECT-TYPE + SYNTAX Unsigned32 (1..4294967295) + UNITS "seconds" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Specifies the interval at the end of which + the switching bus traffic utilization is compared + against cc6kxbarTMSwBusUtilThreshold." + ::= { cc6kxbarTrafficMonitorSwBusObjects 2 } + +cc6kxbarTMSwBusUtilThreshold OBJECT-TYPE + SYNTAX Percent + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Specifies the threshold of the switching bus + traffic utilization." + ::= { cc6kxbarTrafficMonitorSwBusObjects 3 } + +cc6kxbarTMSwBusUtilLogCount OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates the number of times the following + events are logged for the switching bus: + + 1. the switching bus traffic utilization has + risen above the configured threshold (as + specified by cc6kxbarTMSwBusUtilThreshold), + or has kept staying above the configured + threshold at a logging interval (as specified + by cc6kxbarTMSwBusUtilLogInterval). + + 2. the switching bus traffic utilization + has fallen below the configured threshold." + ::= { cc6kxbarTrafficMonitorSwBusObjects 4 } + +cc6kxbarTMSwBusUtilLastLogTime OBJECT-TYPE + SYNTAX DateAndTime + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates the last logging time of the + events as counted in cc6kxbarTMSwBusUtilLogCount. + + This object will contain 0-1-1,00:00:00.0 when + the value of cc6kxbarTMSwBusUtilLogCount is zero." + ::= { cc6kxbarTrafficMonitorSwBusObjects 5 } + +cc6kxbarTMSwBusUtilLogInterval OBJECT-TYPE + SYNTAX Unsigned32 (1..4294967295) + UNITS "seconds" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Specifies the logging interval if the switching + bus traffic utilization keeps staying above the + cc6kxbarTMSwBusUtilThreshold." + ::= { cc6kxbarTrafficMonitorSwBusObjects 6 } + +cc6kxbarTMSwBusUtilUtilization OBJECT-TYPE + SYNTAX Percent + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "The switching bus traffic utilization included + in the notification currently being sent." + ::= { cc6kxbarTrafficMonitorSwBusObjects 7 } + +cc6kxbarTMSwBusUtilNotifEnable OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Specifies whether the generation of + c6kxbarTMSwBusUtilAboveNotif and + c6kxbarTMSwBusUtilBelowNotif notifications + is enabled or not. + + When this object is 'true', the generation of + cc6kxbarTMSwBusUtilAboveNotif and + c6kxbarTMSwBusUtilBelowNotif notifications is + enabled. When this object is 'false', the + generation of cc6kxbarTMSwBusUtilAboveNotif and + c6kxbarTMSwBusUtilBelowNotif notifications + is disabled." + ::= { cc6kxbarTrafficMonitorSwBusObjects 8 } + +cc6kxbarTMChUtilTable OBJECT-TYPE + SYNTAX SEQUENCE OF Cc6kxbarTMChUtilEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "cc6kxbarTrafficMntrChUtilTable provides the + information on the traffic utilization of each + fabric channel associated with each module slot + for a given traffic direction in the chassis." + ::= { cc6kxbarTrafficMonitorChObjects 1 } + +cc6kxbarTMChUtilEntry OBJECT-TYPE + SYNTAX Cc6kxbarTMChUtilEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in cc6kxbarTMChUtilTable. Each traffic + direction for each fabric channel associated with + each module slot in the chassis will have an + entry in this table." + INDEX { + cc6kxbarTMChUtilModule, + cc6kxbarTMChUtilChannel, + cc6kxbarTMChUtilDirection + } + ::= { cc6kxbarTMChUtilTable 1 } + +Cc6kxbarTMChUtilEntry ::= SEQUENCE { + cc6kxbarTMChUtilModule ModuleSlotNumber, + cc6kxbarTMChUtilChannel FabricChannelNumber, + cc6kxbarTMChUtilDirection INTEGER, + cc6kxbarTMChUtilEnable TruthValue, + cc6kxbarTMChUtilInterval Unsigned32, + cc6kxbarTMChUtilThreshold Percent, + cc6kxbarTMChUtilLogCount Counter32, + cc6kxbarTMChUtilLastLogTime DateAndTime +} + +cc6kxbarTMChUtilModule OBJECT-TYPE + SYNTAX ModuleSlotNumber + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Indicates the module slot number in the chassis." + ::= { cc6kxbarTMChUtilEntry 1 } + +cc6kxbarTMChUtilChannel OBJECT-TYPE + SYNTAX FabricChannelNumber + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Indicates the fabric channel number associated with + the corresponding cc6kxbarTMChUtilModule." + ::= { cc6kxbarTMChUtilEntry 2 } + +cc6kxbarTMChUtilDirection OBJECT-TYPE + SYNTAX INTEGER { + ingress(1), + egress(2) + } + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Indicates the direction of traffic to be monitored." + ::= { cc6kxbarTMChUtilEntry 3 } + +cc6kxbarTMChUtilEnable OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Specifies whether the traffic monitor feature is + enabled on a fabric channel for a given traffic + direction or not." + ::= { cc6kxbarTMChUtilEntry 4 } + +cc6kxbarTMChUtilInterval OBJECT-TYPE + SYNTAX Unsigned32 (1..4294967295) + UNITS "seconds" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Specifies the interval at the end of which the + traffic utilization on a fabric channel for a + given traffic direction is compared against + its corresponding cc6kxbarTMChUtilThreshold." + ::= { cc6kxbarTMChUtilEntry 5 } + +cc6kxbarTMChUtilThreshold OBJECT-TYPE + SYNTAX Percent + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Specifies the threshold of the traffic utilization + on a fabric channel for a given traffic direction." + ::= { cc6kxbarTMChUtilEntry 6 } + +cc6kxbarTMChUtilLogCount OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates the number of times the following + events are logged on a fabric channel + for a given direction. + + 1. the traffic utilization on a fabric channel + for a given traffic direction has risen above its + corresponding configured threshold (as specified + by cc6kxbarTMChUtilThreshold), or has kept + staying above the configured threshold at a + logging interval (as specified by + cc6kxbarTMChUtilLogInterval). + + 2. the traffic utilization on a fabric channel + for a given traffic direction has fallen below + its corresponding configured threshold." + ::= { cc6kxbarTMChUtilEntry 7 } + +cc6kxbarTMChUtilLastLogTime OBJECT-TYPE + SYNTAX DateAndTime + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates the last logging time of the + events as counted in the corresponding + cc6kxbarTMChUtilLogCount on a fabric channel + for a given traffic direction. + + This object will contain 0-1-1,00:00:00.0 when + the corresponding cc6kxbarTMChUtilLogCount is zero." + ::= { cc6kxbarTMChUtilEntry 8 } + + + +cc6kxbarTMChUtilLogInterval OBJECT-TYPE + SYNTAX Unsigned32 (1..4294967295) + UNITS "seconds" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Specifies the logging interval if the traffic + utilization for a fabric channel on a given + traffic direction keeps staying above its + corresponding cc6kxbarTMChUtilThreshold." + ::= { cc6kxbarTrafficMonitorChObjects 2 } + +cc6kxbarTMChUtilUtilization OBJECT-TYPE + SYNTAX Percent + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "The traffic utilization on a fabric channel + for a given traffic direction included in the + notification currently being sent." + ::= { cc6kxbarTrafficMonitorChObjects 3 } + +cc6kxbarTMChUtilNotifEnable OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Specifies whether the generation of + cc6kxbarTMChUtilAboveNotif and cc6kxbarTMChUtilBelowNotif + notifications is enabled or not. + + When this object is 'true', the generation of + cc6kxbarTMChUtilAboveNotif and cc6kxbarTMChUtilBelowNotif + notifications is enabled. When this object is 'false', + the generation of cc6kxbarTMChUtilAboveNotif and + cc6kxbarTMChUtilBelowNotif notifications is disabled." + ::= { cc6kxbarTrafficMonitorChObjects 4 } +-- Notifications + +ciscoCat6kXbarMIBNotifs OBJECT IDENTIFIER + ::= { ciscoCat6kCrossbarMIB 0 } + + +cc6kxbarSwBusStatusChangeNotif NOTIFICATION-TYPE + OBJECTS { + cc6kxbarSwBusSwitchingStatus, + cc6kxbarSwBusFailureDuration + } + STATUS current + DESCRIPTION + "A cc6kxbarSwBusStatusChangeNotif notification + is sent by the device when there is change + in switching status of the switching bus as + monitored by cc6kxbarSwBusSwitchingStatus." + ::= { ciscoCat6kXbarMIBNotifs 1 } + +cc6kxbarIntBusCRCErrExcdNotif NOTIFICATION-TYPE + OBJECTS { + entPhysicalName, + entPhysicalVendorType + } + STATUS current + DESCRIPTION + "A cc6kxbarIntBusCRCThreshExcdNotif notification + is sent by the system when the system has + detected that the internal bus CRC error on + a physical entity (such as a module) as specified + by entPhysicalName has exceeded the fatal threshold." + ::= { ciscoCat6kXbarMIBNotifs 2 } + +cc6kxbarIntBusCRCErrRcvrdNotif NOTIFICATION-TYPE + OBJECTS { + entPhysicalName, + entPhysicalVendorType + } + STATUS current + DESCRIPTION + "A cc6kxbarIntBusCRCErrRcvrdNotif notification + is sent by the system when the system has + recovered as the internal bus CRC error on + a physical entity (such as a module) as + specified by entPhysicalName has fallen below + the normal threshold." + ::= { ciscoCat6kXbarMIBNotifs 3 } + +cc6kxbarFlowCtrlBusThrExcdNotif NOTIFICATION-TYPE + OBJECTS { + entPhysicalName, + entPhysicalVendorType + } + STATUS current + DESCRIPTION + "A cc6kxbarFlowCtrlBusThrExcdNotif notification + is sent by the system when the system detects the + first occurrence of the system bus flow control FIFO + threshold exceeding on a physical entity + (such as a module) over the system allowed limit + when the object value of + cc6kxbarFlowCtrlBusFIFOThrMode is 'auto'." + ::= { ciscoCat6kXbarMIBNotifs 4 } + +cc6kxbarTMSwBusUtilAboveNotif NOTIFICATION-TYPE + OBJECTS { + cc6kxbarTMSwBusUtilUtilization, + cc6kxbarTMSwBusUtilThreshold, + cc6kxbarTMSwBusUtilInterval, + entPhysicalDescr + } + STATUS current + DESCRIPTION + "This notification is sent when the switching bus + traffic utilization has risen above the configured + threshold (as specified by + cc6kxbarTMSwBusUtilThreshold), or has kept staying + above the configured threshold at a logging interval + (as specified by cc6kxbarTMSwBusUtilLogInterval). + The varbind entPhysicalDescr specifies the physical + entity (such as chassis) for which the + cc6kxbarTMSwBusUtilAboveNotif is sent." + ::= { ciscoCat6kXbarMIBNotifs 5 } + +cc6kxbarTMSwBusUtilBelowNotif NOTIFICATION-TYPE + OBJECTS { + cc6kxbarTMSwBusUtilUtilization, + cc6kxbarTMSwBusUtilThreshold, + cc6kxbarTMSwBusUtilInterval, + entPhysicalDescr + } + STATUS current + DESCRIPTION + "This notification is sent when the switching bus + traffic utilization has fallen below the configured + threshold (as specified by + cc6kxbarTMSwBusUtilThreshold). The varbind + entPhysicalDescr specifies the physical entity + (such as chassis) for which the + cc6kxbarTMSwBusUtilBelowNotif is sent." + ::= { ciscoCat6kXbarMIBNotifs 6 } + +cc6kxbarTMChUtilAboveNotif NOTIFICATION-TYPE + OBJECTS { + cc6kxbarTMChUtilUtilization, + cc6kxbarTMChUtilThreshold, + cc6kxbarTMChUtilInterval, + entPhysicalDescr + } + STATUS current + DESCRIPTION + "This notification is sent when the traffic + utilization on a fabric channel for a given + traffic direction has risen above its + corresponding configured threshold (as + specified by cc6kxbarTMChUtilThreshold), or has + kept staying above the configured threshold at a + logging interval (as specified by + cc6kxbarTMChUtilLogInterval). The varbind + entPhysicalDescr specifies the physical entity + (such as chassis) for which the + cc6kxbarTMChUtilAboveNotif is sent." + ::= { ciscoCat6kXbarMIBNotifs 7 } + +cc6kxbarTMChUtilBelowNotif NOTIFICATION-TYPE + OBJECTS { + cc6kxbarTMChUtilUtilization, + cc6kxbarTMChUtilThreshold, + cc6kxbarTMChUtilInterval, + entPhysicalDescr + } + STATUS current + DESCRIPTION + "This notification is sent when the traffic + utilization on a fabric channel for a given + traffic direction has fallen below its + corresponding configured threshold (as + specified by cc6kxbarTMChUtilThreshold). The + varbind entPhysicalDescr specifies the + physical entity (such as chassis) for which + the cc6kxbarTMChUtilBelowNotif is sent." + ::= { ciscoCat6kXbarMIBNotifs 8 } +-- Conformance and Compliance + +cc6kxbarMIBConformance OBJECT IDENTIFIER + ::= { ciscoCat6kCrossbarMIB 3 } + +cc6kxbarMIBCompliances OBJECT IDENTIFIER + ::= { cc6kxbarMIBConformance 1 } + +cc6kxbarMIBGroups OBJECT IDENTIFIER + ::= { cc6kxbarMIBConformance 2 } + + +-- Conformance + +cc6kxbarMIBCompliance MODULE-COMPLIANCE + STATUS deprecated + DESCRIPTION + "The compliance statement for + the CISCO-CAT6K-CROSSBAR-MIB." + MODULE -- this module + MANDATORY-GROUPS { + cc6kxbarModuleStatusGroup, + cc6kxbarChannelStatusGroup, + cc6kxbarChannelStatisticsGroup + } + + GROUP cc6kxbarFallbackGroup + DESCRIPTION + "This group is mandatory only for those platforms which + support fallback mode feature." + + GROUP cc6kxbarBusOnlyAllowedGroup + DESCRIPTION + "This group is mandatory only for those platforms which + support busonly mode feature." + ::= { cc6kxbarMIBCompliances 2 } + +cc6kxbarMIBComplianceVer1 MODULE-COMPLIANCE + STATUS deprecated + DESCRIPTION + "The compliance statement for + the CISCO-CAT6K-CROSSBAR-MIB." + MODULE -- this module + MANDATORY-GROUPS { + cc6kxbarModuleStatusGroupVer1, + cc6kxbarChannelStatusGroup, + cc6kxbarChannelStatisticsGroupVer1 + } + + GROUP cc6kxbarFallbackGroup + DESCRIPTION + "This group is mandatory only for those platforms which + support fallback mode feature." + + GROUP cc6kxbarBusOnlyAllowedGroup + DESCRIPTION + "This group is mandatory only for those platforms which + support bus only mode feature." + + GROUP cc6kxbarLcdBannerGroup + DESCRIPTION + "This group is mandatory only for those platforms which + support lcd banner feature." + + GROUP cc6kxbarChannelUtilGroup + DESCRIPTION + "This group is mandatory only for those platforms which + support Input and Output traffic utilization on the + fabric channel." + + GROUP cc6kxbarChannelSpeedGroup + DESCRIPTION + "This group is mandatory only for those platforms which + support fabric channel speed feature." + + GROUP cc6kxbarSwBusGroup + DESCRIPTION + "This group is mandatory only for platforms which support + switching bus switching detection feature." + + GROUP cc6kxbarSwBusNotifGroup + DESCRIPTION + "This group is mandatory only for platforms which support + switching bus switching detection notification + feature." + ::= { cc6kxbarMIBCompliances 3 } + +cc6kxbarMIBComplianceVer2 MODULE-COMPLIANCE + STATUS deprecated + DESCRIPTION + "The compliance statement for + the CISCO-CAT6K-CROSSBAR-MIB." + MODULE -- this module + MANDATORY-GROUPS { + cc6kxbarModuleStatusGroupVer1, + cc6kxbarChannelStatusGroup, + cc6kxbarChannelStatisticsGroupVer1 + } + + GROUP cc6kxbarFallbackGroup + DESCRIPTION + "This group is mandatory only for those platforms which + support fallback mode feature." + + GROUP cc6kxbarBusOnlyAllowedGroup + DESCRIPTION + "This group is mandatory only for those platforms which + support bus only mode feature." + + GROUP cc6kxbarLcdBannerGroup + DESCRIPTION + "This group is mandatory only for those platforms which + support lcd banner feature." + + GROUP cc6kxbarChannelUtilGroup + DESCRIPTION + "This group is mandatory only for those platforms which + support Input and Output traffic utilization on the + fabric channel." + + GROUP cc6kxbarChannelSpeedGroup + DESCRIPTION + "This group is mandatory only for those platforms which + support fabric channel speed feature." + + GROUP cc6kxbarSwBusGroup + DESCRIPTION + "This group is mandatory only for platforms which support + switching bus switching detection feature." + + GROUP cc6kxbarSwBusNotifGroup + DESCRIPTION + "This group is mandatory only for platforms which support + switching bus switching detection notification + feature." + + GROUP cc6kxbarTruncatedOperGroup + DESCRIPTION + "This group is mandatory only for platforms which support + operational truncated mode." + ::= { cc6kxbarMIBCompliances 4 } + +cc6kxbarMIBComplianceVer3 MODULE-COMPLIANCE + STATUS deprecated + DESCRIPTION + "The compliance statement for + the CISCO-CAT6K-CROSSBAR-MIB." + MODULE -- this module + MANDATORY-GROUPS { + cc6kxbarModuleStatusGroupVer1, + cc6kxbarChannelStatusGroup, + cc6kxbarChannelStatisticsGroupVer1 + } + + GROUP cc6kxbarFallbackGroup + DESCRIPTION + "This group is mandatory only for those platforms which + support fallback mode feature." + + GROUP cc6kxbarBusOnlyAllowedGroup + DESCRIPTION + "This group is mandatory only for those platforms which + support bus only mode feature." + + GROUP cc6kxbarLcdBannerGroup + DESCRIPTION + "This group is mandatory only for those platforms which + support lcd banner feature." + + GROUP cc6kxbarChannelUtilGroup + DESCRIPTION + "This group is mandatory only for those platforms which + support Input and Output traffic utilization on the + fabric channel." + + GROUP cc6kxbarChannelSpeedGroup + DESCRIPTION + "This group is mandatory only for those platforms which + support fabric channel speed feature." + + GROUP cc6kxbarSwBusGroup + DESCRIPTION + "This group is mandatory only for platforms which support + switching bus switching detection feature." + + GROUP cc6kxbarSwBusNotifGroup + DESCRIPTION + "This group is mandatory only for platforms which support + switching bus switching detection notification + feature." + + GROUP cc6kxbarTruncatedOperGroup + DESCRIPTION + "This group is mandatory only for platforms which support + operational truncated mode." + + GROUP cc6kxbarIntBusNotifControlGroup + DESCRIPTION + "This group is mandatory only for platforms which support + internal bus notifications." + + GROUP cc6kxbarIntBusCRCErrNotifGroup + DESCRIPTION + "This group is mandatory only for platforms which support + internal bus CRC error notifications." + ::= { cc6kxbarMIBCompliances 5 } + +cc6kxbarMIBComplianceVer4 MODULE-COMPLIANCE + STATUS deprecated + DESCRIPTION + "The compliance statement for + the CISCO-CAT6K-CROSSBAR-MIB." + MODULE -- this module + MANDATORY-GROUPS { + cc6kxbarModuleStatusGroupVer1, + cc6kxbarChannelStatusGroup, + cc6kxbarChannelStatisticsGroupVer1 + } + + GROUP cc6kxbarFallbackGroup + DESCRIPTION + "This group is mandatory only for those platforms which + support fallback mode feature." + + GROUP cc6kxbarBusOnlyAllowedGroup + DESCRIPTION + "This group is mandatory only for those platforms which + support bus only mode feature." + + GROUP cc6kxbarLcdBannerGroup + DESCRIPTION + "This group is mandatory only for those platforms which + support lcd banner feature." + + GROUP cc6kxbarChannelUtilGroup + DESCRIPTION + "This group is mandatory only for those platforms which + support Input and Output traffic utilization on the + fabric channel." + + GROUP cc6kxbarChannelSpeedGroup + DESCRIPTION + "This group is mandatory only for those platforms which + support fabric channel speed feature." + + GROUP cc6kxbarSwBusGroup + DESCRIPTION + "This group is mandatory only for platforms which support + switching bus switching detection feature." + + GROUP cc6kxbarSwBusNotifGroup + DESCRIPTION + "This group is mandatory only for platforms which support + switching bus switching detection notification + feature." + + GROUP cc6kxbarTruncatedOperGroup + DESCRIPTION + "This group is mandatory only for platforms which support + operational truncated mode." + + GROUP cc6kxbarIntBusNotifControlGroup + DESCRIPTION + "This group is mandatory only for platforms which support + internal bus notifications." + + GROUP cc6kxbarIntBusCRCErrNotifGroup + DESCRIPTION + "This group is mandatory only for platforms which support + internal bus CRC error notifications." + + GROUP cc6kxbarIntBusCRCErrGroup + DESCRIPTION + "This group is mandatory only for platforms which support + internal bus CRC error status." + ::= { cc6kxbarMIBCompliances 6 } + +cc6kxbarMIBComplianceVer5 MODULE-COMPLIANCE + STATUS deprecated + DESCRIPTION + "The compliance statement for + the CISCO-CAT6K-CROSSBAR-MIB." + MODULE -- this module + MANDATORY-GROUPS { + cc6kxbarModuleStatusGroupVer1, + cc6kxbarChannelStatusGroup, + cc6kxbarChannelStatisticsGroupVer1 + } + + GROUP cc6kxbarFallbackGroup + DESCRIPTION + "This group is mandatory only for those platforms which + support fallback mode feature." + + GROUP cc6kxbarBusOnlyAllowedGroup + DESCRIPTION + "This group is mandatory only for those platforms which + support bus only mode feature." + + GROUP cc6kxbarLcdBannerGroup + DESCRIPTION + "This group is mandatory only for those platforms which + support lcd banner feature." + + GROUP cc6kxbarChannelUtilGroup + DESCRIPTION + "This group is mandatory only for those platforms which + support Input and Output traffic utilization on the + fabric channel." + + GROUP cc6kxbarChannelSpeedGroup + DESCRIPTION + "This group is mandatory only for those platforms which + support fabric channel speed feature." + + GROUP cc6kxbarSwBusGroup + DESCRIPTION + "This group is mandatory only for platforms which support + switching bus switching detection feature." + + GROUP cc6kxbarSwBusNotifGroup + DESCRIPTION + "This group is mandatory only for platforms which support + switching bus switching detection notification + feature." + + GROUP cc6kxbarTruncatedOperGroup + DESCRIPTION + "This group is mandatory only for platforms which support + operational truncated mode." + + GROUP cc6kxbarIntBusNotifControlGroup + DESCRIPTION + "This group is mandatory only for platforms which support + internal bus notifications." + + GROUP cc6kxbarIntBusCRCErrNotifGroup + DESCRIPTION + "This group is mandatory only for platforms which support + internal bus CRC error notifications." + + GROUP cc6kxbarIntBusCRCErrGroup + DESCRIPTION + "This group is mandatory only for platforms which support + internal bus CRC error status." + + GROUP cc6kxbarDcefOnlyModeAllowedGroup + DESCRIPTION + "This group is mandatory only for platforms which support + dcef only mode feature." + + GROUP cc6kxbarForceBusModeGroup + DESCRIPTION + "This group is mandatory only for platforms which support + force bus mode feature." + + GROUP cc6kxbarFlowCtrlNotifCtrlGroup + DESCRIPTION + "This group is mandatory only for platforms which support + the system flow control notification control." + + GROUP cc6kxbarFlowCtrlBusThreshGroup + DESCRIPTION + "This group is mandatory only for platforms which support + the system bus flow control FIFO threshold configuration." + + GROUP cc6kxbarFlowCtrlBusThrNotifGroup + DESCRIPTION + "This group is mandatory only for platforms which support + the system bus flow control FIFO threshold exceeding + notification." + + GROUP cc6kxbarBusOnlyModeOperGroup + DESCRIPTION + "This group is mandatory only for platforms which support + operational bus mode." + ::= { cc6kxbarMIBCompliances 7 } + +cc6kxbarMIBComplianceVer6 MODULE-COMPLIANCE + STATUS deprecated + DESCRIPTION + "The compliance statement for + the CISCO-CAT6K-CROSSBAR-MIB." + MODULE -- this module + MANDATORY-GROUPS { + cc6kxbarModuleStatusGroupVer1, + cc6kxbarChannelStatusGroup, + cc6kxbarChannelStatisticsGroupVer1 + } + + GROUP cc6kxbarFallbackGroup + DESCRIPTION + "This group is mandatory only for those platforms which + support fallback mode feature." + + GROUP cc6kxbarBusOnlyAllowedGroup + DESCRIPTION + "This group is mandatory only for those platforms which + support bus only mode feature." + + GROUP cc6kxbarLcdBannerGroup + DESCRIPTION + "This group is mandatory only for those platforms which + support lcd banner feature." + + GROUP cc6kxbarChannelUtilGroup + DESCRIPTION + "This group is mandatory only for those platforms which + support Input and Output traffic utilization on the + fabric channel." + + GROUP cc6kxbarChannelSpeedGroup + DESCRIPTION + "This group is mandatory only for those platforms which + support fabric channel speed feature." + + GROUP cc6kxbarSwBusGroup + DESCRIPTION + "This group is mandatory only for platforms which support + switching bus switching detection feature." + + GROUP cc6kxbarSwBusNotifGroup + DESCRIPTION + "This group is mandatory only for platforms which support + switching bus switching detection notification + feature." + + GROUP cc6kxbarTruncatedOperGroup + DESCRIPTION + "This group is mandatory only for platforms which support + operational truncated mode." + + GROUP cc6kxbarIntBusNotifControlGroup + DESCRIPTION + "This group is mandatory only for platforms which support + internal bus notifications." + + GROUP cc6kxbarIntBusCRCErrNotifGroup + DESCRIPTION + "This group is mandatory only for platforms which support + internal bus CRC error notifications." + + GROUP cc6kxbarIntBusCRCErrGroup + DESCRIPTION + "This group is mandatory only for platforms which support + internal bus CRC error status." + + GROUP cc6kxbarDcefOnlyModeAllowedGroup + DESCRIPTION + "This group is mandatory only for platforms which support + dcef only mode feature." + + GROUP cc6kxbarForceBusModeGroup + DESCRIPTION + "This group is mandatory only for platforms which support + force bus mode feature." + + GROUP cc6kxbarFlowCtrlNotifCtrlGroup + DESCRIPTION + "This group is mandatory only for platforms which support + the system flow control notification control." + + GROUP cc6kxbarFlowCtrlBusThreshGroup + DESCRIPTION + "This group is mandatory only for platforms which support + the system bus flow control FIFO threshold configuration." + + GROUP cc6kxbarFlowCtrlBusThrNotifGroup + DESCRIPTION + "This group is mandatory only for platforms which support + the system bus flow control FIFO threshold exceeding + notification." + + GROUP cc6kxbarBusOnlyModeOperGroup + DESCRIPTION + "This group is mandatory only for platforms which support + operational bus mode." + + GROUP cc6kxbarSysCapPfcOperModeGroup + DESCRIPTION + "This group is mandatory only for platforms which + support the system information of PFC operational mode." + + GROUP cc6kxbarSysCapSwitchResGroup + DESCRIPTION + "This group is mandatory only for platforms which + support the capacity information of switching + resources in the system." + + GROUP cc6kxbarChannelUtilGroup1 + DESCRIPTION + "This group is mandatory only for those platforms which + support peak input and output traffic utilization on the + fabric channel." + + GROUP cc6kxbarSwBusGroup1 + DESCRIPTION + "This group is mandatory only for platforms which support + switching bus utilization." + + GROUP cc6kxbarErrorGroup + DESCRIPTION + "This group is mandatory only for those platforms which + support error statistics on the fabric channel." + + GROUP cc6kxbarErrRcvryThresholdGroup + DESCRIPTION + "This group is mandatory for platforms which provide + the configuration of thresholds on fabric link errors + for the fabric error recovery feature." + + GROUP cc6kxbarErrRcvrySwitchoverGroup + DESCRIPTION + "This group is mandatory for platforms which provide + the configuration of fabric switchover on excessive fabric + link errors for the fabric error recovery feature." + ::= { cc6kxbarMIBCompliances 8 } + +cc6kxbarMIBComplianceVer7 MODULE-COMPLIANCE + STATUS deprecated + DESCRIPTION + "The compliance statement for + the CISCO-CAT6K-CROSSBAR-MIB." + MODULE -- this module + MANDATORY-GROUPS { + cc6kxbarModuleStatusGroupVer1, + cc6kxbarChannelStatusGroup, + cc6kxbarChannelStatisticsGroupVer1 + } + + GROUP cc6kxbarFallbackGroup + DESCRIPTION + "This group is mandatory only for those platforms which + support fallback mode feature." + + GROUP cc6kxbarBusOnlyAllowedGroup + DESCRIPTION + "This group is mandatory only for those platforms which + support bus only mode feature." + + GROUP cc6kxbarLcdBannerGroup + DESCRIPTION + "This group is mandatory only for those platforms which + support lcd banner feature." + + GROUP cc6kxbarChannelUtilGroup + DESCRIPTION + "This group is mandatory only for those platforms which + support Input and Output traffic utilization on the + fabric channel." + + GROUP cc6kxbarChannelSpeedGroup + DESCRIPTION + "This group is mandatory only for those platforms which + support fabric channel speed feature." + + GROUP cc6kxbarSwBusGroup + DESCRIPTION + "This group is mandatory only for platforms which support + switching bus switching detection feature." + + GROUP cc6kxbarSwBusNotifGroup + DESCRIPTION + "This group is mandatory only for platforms which support + switching bus switching detection notification + feature." + + GROUP cc6kxbarTruncatedOperGroup + DESCRIPTION + "This group is mandatory only for platforms which support + operational truncated mode." + + GROUP cc6kxbarIntBusNotifControlGroup + DESCRIPTION + "This group is mandatory only for platforms which support + internal bus notifications." + + GROUP cc6kxbarIntBusCRCErrNotifGroup + DESCRIPTION + "This group is mandatory only for platforms which support + internal bus CRC error notifications." + + GROUP cc6kxbarIntBusCRCErrGroup + DESCRIPTION + "This group is mandatory only for platforms which support + internal bus CRC error status." + + GROUP cc6kxbarDcefOnlyModeAllowedGroup + DESCRIPTION + "This group is mandatory only for platforms which support + dcef only mode feature." + + GROUP cc6kxbarForceBusModeGroup + DESCRIPTION + "This group is mandatory only for platforms which support + force bus mode feature." + + GROUP cc6kxbarFlowCtrlNotifCtrlGroup + DESCRIPTION + "This group is mandatory only for platforms which support + the system flow control notification control." + + GROUP cc6kxbarFlowCtrlBusThreshGroup + DESCRIPTION + "This group is mandatory only for platforms which support + the system bus flow control FIFO threshold configuration." + + GROUP cc6kxbarFlowCtrlBusThrNotifGroup + DESCRIPTION + "This group is mandatory only for platforms which support + the system bus flow control FIFO threshold exceeding + notification." + + GROUP cc6kxbarBusOnlyModeOperGroup + DESCRIPTION + "This group is mandatory only for platforms which support + operational bus mode." + + GROUP cc6kxbarSysCapPfcOperModeGroup + DESCRIPTION + "This group is mandatory only for platforms which + support the system information of PFC operational mode." + + GROUP cc6kxbarSysCapSwitchResGroup + DESCRIPTION + "This group is mandatory only for platforms which + support the capacity information of switching + resources in the system." + + GROUP cc6kxbarChannelUtilGroup1 + DESCRIPTION + "This group is mandatory only for those platforms which + support peak input and output traffic utilization on the + fabric channel." + + GROUP cc6kxbarSwBusGroup1 + DESCRIPTION + "This group is mandatory only for platforms which support + switching bus utilization." + + GROUP cc6kxbarErrorGroup + DESCRIPTION + "This group is mandatory only for those platforms which + support error statistics on the fabric channel." + + GROUP cc6kxbarErrRcvryThresholdGroup + DESCRIPTION + "This group is mandatory for platforms which provide + the configuration of thresholds on fabric link errors + for the fabric error recovery feature." + + GROUP cc6kxbarErrRcvrySwitchoverGroup + DESCRIPTION + "This group is mandatory for platforms which provide + the configuration of fabric switchover on excessive fabric + link errors for the fabric error recovery feature." + + GROUP cc6kxbarErrRcvryPersLinkResGroup + DESCRIPTION + "This group is mandatory for platforms which provide + the configuration of channel resync on excessive + persistent fabric link errors for the fabric error + recovery feature." + + GROUP cc6kxbarErrRcvryChResyncGroup + DESCRIPTION + "This group is mandatory for platforms which provide + the configuration of channel resync threshold for the + fabric error recovery feature." + + GROUP cc6kxbarTMSwBusUtilGroup + DESCRIPTION + "This group is mandatory for platforms which provide + the configuration for traffic monitor feature on the + switching bus." + + GROUP cc6kxbarTMSwBusUtilNotifControlGroup + DESCRIPTION + "This group is mandatory for platforms which provide + the notification control for traffic monitor + notifications on the switching bus." + + GROUP cc6kxbarTMSwBusUtilNotifObjectGroup + DESCRIPTION + "This group is mandatory for platforms which support + traffic monitor notifications on the switching bus." + + GROUP cc6kxbarTMSwBusUtilNotifGroup + DESCRIPTION + "This group is mandatory for platforms which support + traffic monitor notifications on the switching bus." + + GROUP cc6kxbarTMChUtilGroup + DESCRIPTION + "This group is mandatory for platforms which provide + the configuration for traffic monitor feature on + fabric channels." + + GROUP cc6kxbarTMChUtilNotifControlGroup + DESCRIPTION + "This group is mandatory for platforms which provide + the notification control for traffic monitor + notifications on fabric channels." + + GROUP cc6kxbarTMChUtilNotifObjectGroup + DESCRIPTION + "This group is mandatory for platforms which support + traffic monitor notifications on fabric channels." + + GROUP cc6kxbarTMChUtilNotifGroup + DESCRIPTION + "This group is mandatory for platforms which support + traffic monitor notifications on fabric channels." + ::= { cc6kxbarMIBCompliances 9 } + +cc6kxbarMIBComplianceVer8 MODULE-COMPLIANCE + STATUS current + DESCRIPTION + "The compliance statement for + the CISCO-CAT6K-CROSSBAR-MIB." + MODULE -- this module + MANDATORY-GROUPS { + cc6kxbarModuleStatusGroupVer1, + cc6kxbarChannelStatusGroup, + cc6kxbarChannelStatisticsGroupVer1 + } + + GROUP cc6kxbarFallbackGroup + DESCRIPTION + "This group is mandatory only for those platforms which + support fallback mode feature." + + GROUP cc6kxbarBusOnlyAllowedGroup + DESCRIPTION + "This group is mandatory only for those platforms which + support bus only mode feature." + + GROUP cc6kxbarLcdBannerGroup + DESCRIPTION + "This group is mandatory only for those platforms which + support lcd banner feature." + + GROUP cc6kxbarChannelUtilGroup + DESCRIPTION + "This group is mandatory only for those platforms which + support Input and Output traffic utilization on the + fabric channel." + + GROUP cc6kxbarChannelSpeedGroup + DESCRIPTION + "This group is mandatory only for those platforms which + support fabric channel speed feature." + + GROUP cc6kxbarSwBusGroup + DESCRIPTION + "This group is mandatory only for platforms which support + switching bus switching detection feature." + + GROUP cc6kxbarSwBusNotifGroup + DESCRIPTION + "This group is mandatory only for platforms which support + switching bus switching detection notification + feature." + + GROUP cc6kxbarTruncatedOperGroup + DESCRIPTION + "This group is mandatory only for platforms which support + operational truncated mode." + + GROUP cc6kxbarIntBusNotifControlGroup + DESCRIPTION + "This group is mandatory only for platforms which support + internal bus notifications." + + GROUP cc6kxbarIntBusCRCErrNotifGroup + DESCRIPTION + "This group is mandatory only for platforms which support + internal bus CRC error notifications." + + GROUP cc6kxbarIntBusCRCErrGroup + DESCRIPTION + "This group is mandatory only for platforms which support + internal bus CRC error status." + + GROUP cc6kxbarDcefOnlyModeAllowedGroup + DESCRIPTION + "This group is mandatory only for platforms which support + dcef only mode feature." + + GROUP cc6kxbarForceBusModeGroup + DESCRIPTION + "This group is mandatory only for platforms which support + force bus mode feature." + + GROUP cc6kxbarFlowCtrlNotifCtrlGroup + DESCRIPTION + "This group is mandatory only for platforms which support + the system flow control notification control." + + GROUP cc6kxbarFlowCtrlBusThreshGroup + DESCRIPTION + "This group is mandatory only for platforms which support + the system bus flow control FIFO threshold configuration." + + GROUP cc6kxbarFlowCtrlBusThrNotifGroup + DESCRIPTION + "This group is mandatory only for platforms which support + the system bus flow control FIFO threshold exceeding + notification." + + GROUP cc6kxbarBusOnlyModeOperGroup + DESCRIPTION + "This group is mandatory only for platforms which support + operational bus mode." + + GROUP cc6kxbarSysCapPfcOperModeGroup + DESCRIPTION + "This group is mandatory only for platforms which + support the system information of PFC operational mode." + + GROUP cc6kxbarSysCapSwitchResGroup + DESCRIPTION + "This group is mandatory only for platforms which + support the capacity information of switching + resources in the system." + + GROUP cc6kxbarChannelUtilGroup1 + DESCRIPTION + "This group is mandatory only for those platforms which + support peak input and output traffic utilization on the + fabric channel." + + GROUP cc6kxbarSwBusGroup1 + DESCRIPTION + "This group is mandatory only for platforms which support + switching bus utilization." + + GROUP cc6kxbarErrorGroup + DESCRIPTION + "This group is mandatory only for those platforms which + support error statistics on the fabric channel." + + GROUP cc6kxbarErrRcvryThresholdGroup + DESCRIPTION + "This group is mandatory for platforms which provide + the configuration of thresholds on fabric link errors + for the fabric error recovery feature." + + GROUP cc6kxbarErrRcvrySwitchoverGroup + DESCRIPTION + "This group is mandatory for platforms which provide + the configuration of fabric switchover on excessive fabric + link errors for the fabric error recovery feature." + + GROUP cc6kxbarErrRcvryPersLinkResGroup + DESCRIPTION + "This group is mandatory for platforms which provide + the configuration of channel resync on excessive + persistent fabric link errors for the fabric error + recovery feature." + + GROUP cc6kxbarErrRcvryChResyncGroup + DESCRIPTION + "This group is mandatory for platforms which provide + the configuration of channel resync threshold for the + fabric error recovery feature." + + GROUP cc6kxbarTMSwBusUtilGroup + DESCRIPTION + "This group is mandatory for platforms which provide + the configuration for traffic monitor feature on the + switching bus." + + GROUP cc6kxbarTMSwBusUtilNotifControlGroup + DESCRIPTION + "This group is mandatory for platforms which provide + the notification control for traffic monitor + notifications on the switching bus." + + GROUP cc6kxbarTMSwBusUtilNotifObjectGroup + DESCRIPTION + "This group is mandatory for platforms which support + traffic monitor notifications on the switching bus." + + GROUP cc6kxbarTMSwBusUtilNotifGroup + DESCRIPTION + "This group is mandatory for platforms which support + traffic monitor notifications on the switching bus." + + GROUP cc6kxbarTMChUtilGroup + DESCRIPTION + "This group is mandatory for platforms which provide + the configuration for traffic monitor feature on + fabric channels." + + GROUP cc6kxbarTMChUtilNotifControlGroup + DESCRIPTION + "This group is mandatory for platforms which provide + the notification control for traffic monitor + notifications on fabric channels." + + GROUP cc6kxbarTMChUtilNotifObjectGroup + DESCRIPTION + "This group is mandatory for platforms which support + traffic monitor notifications on fabric channels." + + GROUP cc6kxbarTMChUtilNotifGroup + DESCRIPTION + "This group is mandatory for platforms which support + traffic monitor notifications on fabric channels." + + GROUP cc6kxbarStatisticsLbusDropGroup + DESCRIPTION + "This group is mandatory for platforms which support + local bus packet drop statistics on fabric channels." + ::= { cc6kxbarMIBCompliances 10 } + +-- Units of Conformance + +cc6kxbarModuleStatusGroup OBJECT-GROUP + OBJECTS { + cc6kxbarLcdBannerMaxSize, + cc6kxbarLcdBannerBanner, + cc6kxbarTruncatedModeAllowed, + cc6kxbarMinFabricPresent, + cc6kxbarFabricActiveSlot, + cc6kxbarFabricBackupSlot, + cc6kxbarModuleModeSwitchingMode + } + STATUS deprecated + DESCRIPTION + "A collection of objects providing + configuration and operation of the crossbar + switching fabric module and switching capable + module. + cc6kxbarModuleStatusGroup object is superseded by cc6kxbarModuleStatusGroupVer1." + ::= { cc6kxbarMIBGroups 1 } + +cc6kxbarChannelStatusGroup OBJECT-GROUP + OBJECTS { + cc6kxbarModuleChannelModStatus, + cc6kxbarModuleChannelFabStatus + } + STATUS current + DESCRIPTION + "A collection of objects providing + status and configuration of the fabric channel." + ::= { cc6kxbarMIBGroups 2 } + +cc6kxbarChannelStatisticsGroup OBJECT-GROUP + OBJECTS { + cc6kxbarStatisticsInErrors, + cc6kxbarStatisticsOutErrors, + cc6kxbarStatisticsOutDropped, + cc6kxbarStatisticsInUtil, + cc6kxbarStatisticsOutUtil + } + STATUS deprecated + DESCRIPTION + "A collection of objects providing statistics for + the fabric channel. + cc6kxbarChannelStatisticsGroup object is superseded by cc6kxbarChannelStatisticsGroupVer1." + ::= { cc6kxbarMIBGroups 3 } + +cc6kxbarFallbackGroup OBJECT-GROUP + OBJECTS { cc6kxbarFallbackMode } + STATUS current + DESCRIPTION + "This object controls system fallback to bus-mode + after loss of switching fabric module." + ::= { cc6kxbarMIBGroups 4 } + +cc6kxbarBusOnlyAllowedGroup OBJECT-GROUP + OBJECTS { cc6kxbarBusOnlyModeAllowed } + STATUS current + DESCRIPTION + "This object determines the value of + cc6kxbarModuleModeSwitchingMode of each module." + ::= { cc6kxbarMIBGroups 5 } + +cc6kxbarModuleStatusGroupVer1 OBJECT-GROUP + OBJECTS { + cc6kxbarTruncatedModeAllowed, + cc6kxbarMinFabricPresent, + cc6kxbarFabricActiveSlot, + cc6kxbarFabricBackupSlot, + cc6kxbarModuleModeSwitchingMode + } + STATUS current + DESCRIPTION + "A collection of objects providing + configuration and operation of the crossbar + switching fabric module and switching capable + module." + ::= { cc6kxbarMIBGroups 6 } + +cc6kxbarChannelStatisticsGroupVer1 OBJECT-GROUP + OBJECTS { + cc6kxbarStatisticsInErrors, + cc6kxbarStatisticsOutErrors, + cc6kxbarStatisticsOutDropped + } + STATUS current + DESCRIPTION + "A collection of objects providing statistics for + the fabric channel." + ::= { cc6kxbarMIBGroups 7 } + +cc6kxbarLcdBannerGroup OBJECT-GROUP + OBJECTS { + cc6kxbarLcdBannerMaxSize, + cc6kxbarLcdBannerBanner + } + STATUS current + DESCRIPTION + "A collection of objects providing configuration of + the lcd Banner of the fabric module." + ::= { cc6kxbarMIBGroups 8 } + +cc6kxbarChannelUtilGroup OBJECT-GROUP + OBJECTS { + cc6kxbarStatisticsInUtil, + cc6kxbarStatisticsOutUtil + } + STATUS current + DESCRIPTION + "These object determines Input and Output Utilization of the + fabric channel." + ::= { cc6kxbarMIBGroups 9 } + +cc6kxbarChannelSpeedGroup OBJECT-GROUP + OBJECTS { cc6kxbarModuleChannelSpeed } + STATUS current + DESCRIPTION + "A collection of objects providing the + speed of the fabric channel." + ::= { cc6kxbarMIBGroups 10 } + +cc6kxbarSwBusGroup OBJECT-GROUP + OBJECTS { + cc6kxbarSwBusSwitchingStatus, + cc6kxbarSwBusFailureDuration, + cc6kxbarSwBusNotifEnable + } + STATUS current + DESCRIPTION + "A collection of objects for the switching bus switching + detection feature." + ::= { cc6kxbarMIBGroups 11 } + +cc6kxbarSwBusNotifGroup NOTIFICATION-GROUP + NOTIFICATIONS { cc6kxbarSwBusStatusChangeNotif } + STATUS current + DESCRIPTION + "A collection of notifications for the switching + bus switching detection feature." + ::= { cc6kxbarMIBGroups 12 } + +cc6kxbarTruncatedOperGroup OBJECT-GROUP + OBJECTS { cc6kxbarTruncatedModeOper } + STATUS current + DESCRIPTION + "A collection of objects providing the + operational truncated mode." + ::= { cc6kxbarMIBGroups 13 } + +cc6kxbarIntBusNotifControlGroup OBJECT-GROUP + OBJECTS { cc6kxbarIntBusNotifEnable } + STATUS current + DESCRIPTION + "A collection of objects to control the notification + generation for internal bus." + ::= { cc6kxbarMIBGroups 14 } + +cc6kxbarIntBusCRCErrNotifGroup NOTIFICATION-GROUP + NOTIFICATIONS { + cc6kxbarIntBusCRCErrExcdNotif, + cc6kxbarIntBusCRCErrRcvrdNotif + } + STATUS current + DESCRIPTION + "A collection of notifications for the + internal bus CRC error." + ::= { cc6kxbarMIBGroups 15 } + +cc6kxbarIntBusCRCErrGroup OBJECT-GROUP + OBJECTS { + cc6kxbarIntBusCRCErrExcdStatus, + cc6kxbarIntBusCRCErrExcdCount + } + STATUS current + DESCRIPTION + "A collection of objects to indicate the internal bus + CRC error information on a physical entity." + ::= { cc6kxbarMIBGroups 16 } + +cc6kxbarDcefOnlyModeAllowedGroup OBJECT-GROUP + OBJECTS { cc6kxbarDcefOnlyModeAllowed } + STATUS current + DESCRIPTION + "A collection of objects providing the configuration + and information about the dcef only mode feature." + ::= { cc6kxbarMIBGroups 17 } + +cc6kxbarForceBusModeGroup OBJECT-GROUP + OBJECTS { cc6kxbarForceBusMode } + STATUS current + DESCRIPTION + "A collection of objects providing the configuration + and information about the force bus mode feature." + ::= { cc6kxbarMIBGroups 18 } + +cc6kxbarFlowCtrlNotifCtrlGroup OBJECT-GROUP + OBJECTS { cc6kxbarFlowCtrlNotifEnable } + STATUS current + DESCRIPTION + "A collection of objects to control the notification + generation for the system flow control feature." + ::= { cc6kxbarMIBGroups 19 } + +cc6kxbarFlowCtrlBusThreshGroup OBJECT-GROUP + OBJECTS { + cc6kxbarFlowCtrlBusFIFOThrMode, + cc6kxbarFlowCtrlBusFIFOThrValue, + cc6kxbarFlowCtrlBusFIFOTransTime + } + STATUS current + DESCRIPTION + "A collection of objects providing configuration + information about the system bus flow control FIFO + threshold." + ::= { cc6kxbarMIBGroups 20 } + +cc6kxbarFlowCtrlBusThrNotifGroup NOTIFICATION-GROUP + NOTIFICATIONS { cc6kxbarFlowCtrlBusThrExcdNotif } + STATUS current + DESCRIPTION + "A collection of notifications for the system bus + flow control FIFO threshold exceeding." + ::= { cc6kxbarMIBGroups 21 } + +cc6kxbarBusOnlyModeOperGroup OBJECT-GROUP + OBJECTS { cc6kxbarBusOnlyModeOper } + STATUS current + DESCRIPTION + "A collection of objects providing the + operational bus mode." + ::= { cc6kxbarMIBGroups 22 } + +cc6kxbarSysCapPfcOperModeGroup OBJECT-GROUP + OBJECTS { cc6kxbarSysCapPfcOperMode } + STATUS current + DESCRIPTION + "A collection of objects providing the system + information of PFC operational mode." + ::= { cc6kxbarMIBGroups 23 } + +cc6kxbarSysCapSwitchResGroup OBJECT-GROUP + OBJECTS { + cc6kxbarSysCapSwitchResSeries, + cc6kxbarSysCapSwitchResCefMode + } + STATUS current + DESCRIPTION + "A collection of objects providing the capacity + information of switching resources in the system." + ::= { cc6kxbarMIBGroups 24 } + +cc6kxbarChannelUtilGroup1 OBJECT-GROUP + OBJECTS { + cc6kxbarStatisticsPeakInUtil, + cc6kxbarStatisticsPeakTmInUtil, + cc6kxbarStatisticsPeakOutUtil, + cc6kxbarStatisticsPeakTmOutUtil + } + STATUS current + DESCRIPTION + "A collection of objects providing the information about peak + input and output utilization of a specific fabric channel on + a specific module." + ::= { cc6kxbarMIBGroups 25 } + +cc6kxbarSwBusGroup1 OBJECT-GROUP + OBJECTS { + cc6kxbarSwBusUtilization, + cc6kxbarSwBusPeakUtilization, + cc6kxbarSwBusPeakTimeUtil + } + STATUS current + DESCRIPTION + "A collection of objects providing the information about + switching bus utilization." + ::= { cc6kxbarMIBGroups 26 } + +cc6kxbarErrorGroup OBJECT-GROUP + OBJECTS { + cc6kxbarErrorModuleCrc, + cc6kxbarErrorModuleHbeat, + cc6kxbarErrorModuleSync, + cc6kxbarErrorModuleDDRSync, + cc6kxbarErrorChannelSync, + cc6kxbarErrorChannelBuffer, + cc6kxbarErrorChannelTimeout + } + STATUS current + DESCRIPTION + "A collection of objects providing error statistics for + a specific fabric channel on a specific module." + ::= { cc6kxbarMIBGroups 27 } + +cc6kxbarErrRcvryThresholdGroup OBJECT-GROUP + OBJECTS { + cc6kxbarErrRcvryThreshLink, + cc6kxbarErrRcvryThreshPersLink + } + STATUS current + DESCRIPTION + "A collection of objects providing the configuration + of thresholds on fabric link errors for the fabric + error recovery feature." + ::= { cc6kxbarMIBGroups 28 } + +cc6kxbarErrRcvrySwitchoverGroup OBJECT-GROUP + OBJECTS { cc6kxbarErrRcvrySwitchoverEnable } + STATUS current + DESCRIPTION + "A collection of objects providing the configuration + of fabric switchover on excessive fabric link errors + for the fabric error recovery feature." + ::= { cc6kxbarMIBGroups 29 } + +cc6kxbarErrRcvryPersLinkResGroup OBJECT-GROUP + OBJECTS { cc6kxbarErrRcvryPersLinkResync } + STATUS current + DESCRIPTION + "A collection of objects providing the configuration + of channel resync on excessive persistent fabric link + errors for the fabric error recovery feature." + ::= { cc6kxbarMIBGroups 30 } + +cc6kxbarErrRcvryChResyncGroup OBJECT-GROUP + OBJECTS { + cc6kxbarErrRcvryChResyncCount, + cc6kxbarErrRcvryChResyncInterval + } + STATUS current + DESCRIPTION + "A collection of objects providing the configuration + for channel resync threshold for the fabric error + recovery feature." + ::= { cc6kxbarMIBGroups 31 } + +cc6kxbarTMSwBusUtilGroup OBJECT-GROUP + OBJECTS { + cc6kxbarTMSwBusUtilEnable, + cc6kxbarTMSwBusUtilInterval, + cc6kxbarTMSwBusUtilThreshold, + cc6kxbarTMSwBusUtilLogCount, + cc6kxbarTMSwBusUtilLastLogTime, + cc6kxbarTMSwBusUtilLogInterval + } + STATUS current + DESCRIPTION + "A collection of objects providing configuration + information for traffic monitor feature on + the switching bus." + ::= { cc6kxbarMIBGroups 32 } + +cc6kxbarTMSwBusUtilNotifControlGroup OBJECT-GROUP + OBJECTS { cc6kxbarTMSwBusUtilNotifEnable } + STATUS current + DESCRIPTION + "A collection of objects to control the traffic monitor + notification generation on the switching bus." + ::= { cc6kxbarMIBGroups 33 } + +cc6kxbarTMSwBusUtilNotifObjectGroup OBJECT-GROUP + OBJECTS { cc6kxbarTMSwBusUtilUtilization } + STATUS current + DESCRIPTION + "A collection of objects included in the traffic monitor + notifications on the switching bus." + ::= { cc6kxbarMIBGroups 34 } + +cc6kxbarTMSwBusUtilNotifGroup NOTIFICATION-GROUP + NOTIFICATIONS { + cc6kxbarTMSwBusUtilAboveNotif, + cc6kxbarTMSwBusUtilBelowNotif + } + STATUS current + DESCRIPTION + "A collection of traffic monitor notifications on the + switching bus." + ::= { cc6kxbarMIBGroups 35 } + +cc6kxbarTMChUtilGroup OBJECT-GROUP + OBJECTS { + cc6kxbarTMChUtilEnable, + cc6kxbarTMChUtilInterval, + cc6kxbarTMChUtilThreshold, + cc6kxbarTMChUtilLogCount, + cc6kxbarTMChUtilLastLogTime, + cc6kxbarTMChUtilLogInterval + } + STATUS current + DESCRIPTION + "A collection of objects providing the configuration + information for traffic monitor feature on fabric + channels." + ::= { cc6kxbarMIBGroups 36 } + +cc6kxbarTMChUtilNotifControlGroup OBJECT-GROUP + OBJECTS { cc6kxbarTMChUtilNotifEnable } + STATUS current + DESCRIPTION + "A collection of objects to control the traffic monitor + notification generation on fabric channels." + ::= { cc6kxbarMIBGroups 37 } + +cc6kxbarTMChUtilNotifObjectGroup OBJECT-GROUP + OBJECTS { cc6kxbarTMChUtilUtilization } + STATUS current + DESCRIPTION + "A collection of objects included in the traffic monitor + notifications on fabric channels." + ::= { cc6kxbarMIBGroups 38 } + +cc6kxbarTMChUtilNotifGroup NOTIFICATION-GROUP + NOTIFICATIONS { + cc6kxbarTMChUtilAboveNotif, + cc6kxbarTMChUtilBelowNotif + } + STATUS current + DESCRIPTION + "A collection of traffic monitor notifications on + fabric channels." + ::= { cc6kxbarMIBGroups 39 } + +cc6kxbarStatisticsLbusDropGroup OBJECT-GROUP + OBJECTS { cc6kxbarStatisticsLbusDrops } + STATUS current + DESCRIPTION + "A collection of objects providing information for + local bus drop packets statistics." + ::= { cc6kxbarMIBGroups 40 } + +END + + + |