diff options
Diffstat (limited to 'MIBS/ciena/CIENA-CES-CFM-MIB')
| -rw-r--r-- | MIBS/ciena/CIENA-CES-CFM-MIB | 7296 |
1 files changed, 7296 insertions, 0 deletions
diff --git a/MIBS/ciena/CIENA-CES-CFM-MIB b/MIBS/ciena/CIENA-CES-CFM-MIB new file mode 100644 index 0000000..70a38e2 --- /dev/null +++ b/MIBS/ciena/CIENA-CES-CFM-MIB @@ -0,0 +1,7296 @@ +-- This file was included in Ciena MIB release MIBS-CIENA-CES-08-07-00-024 + -- + + -- CIENA-CES-CFM-MIB.my + + -- + + + + CIENA-CES-CFM-MIB DEFINITIONS ::= BEGIN + + + + IMPORTS + + TimeTicks, Integer32, Unsigned32, Counter32, Counter64, NOTIFICATION-TYPE, OBJECT-TYPE, MODULE-IDENTITY + + FROM SNMPv2-SMI + + DisplayString, MacAddress, TruthValue, TEXTUAL-CONVENTION + + FROM SNMPv2-TC + + cienaGlobalSeverity, cienaGlobalMacAddress + + FROM CIENA-GLOBAL-MIB + + CienaGlobalState, CienaStatsClear,CienaMacAddress + + FROM CIENA-TC + + cienaCesConfig,cienaCesStatistics, cienaCesNotifications + + FROM CIENA-SMI; + + + + cienaCesCfmMIB MODULE-IDENTITY + + LAST-UPDATED "201706070000Z" + ORGANIZATION "Ciena Corp." + CONTACT-INFO + " Mib Meister + 7035 Ridge Road + Hanover, Maryland 21076 + USA + Phone: +1 800 921 1144 + Email: support@ciena.com" + + DESCRIPTION + + "This module defines the CFM configuration and notification objects." + + REVISION "201706070000Z" + DESCRIPTION + + "Updated contact info." + + REVISION "201705030000Z" + DESCRIPTION + "Added cienaCesCfmServiceFaultTime, cienaCesCfmServiceFaultType, cienaCesCfmServiceFaultDesc, + cienaCesCfmServiceFaultMep to cienaCesCfmFaultTrapClear." + + REVISION "201705190000Z" + DESCRIPTION + + "Added cienaCesCfmMEPSignalDegradeMonitoringStatus and cienaCesCfmMEPSignalDegradeTriggerMode + to cienaCesCfmMEPEntry + Added cienaCesCfmSyntheticLossSessionSdSetThreshold and cienaCesCfmSyntheticLossSessionSdClearThreshold + to CienaCesCfmSyntheticLossSessionEntry. + Added cienaCesCfmSyntheticLossSessionSignalDegradeFaultSetTrap and cienaCesCfmSyntheticLossSessionSignalDegradeFaultClearTrap + to cienaCesCfmNotifMIBNotification." + + REVISION "201703160000Z" + DESCRIPTION + + "Modified description section of following objects: + - cienaCesCfmServiceAlarmPriority + - cienaCesCfmGlobalSLMDefaultInterval + - cienaCesCfmServiceDMMInterval + - cienaCesCfmServiceLMMInterval." + + REVISION "201702230000Z" + DESCRIPTION + + "Added new attribute cienaCesCfmMepStatsToTxLoopbackMessages to + cienaCesCfmMepStatsEntry." + + REVISION "201610240000Z" + DESCRIPTION + + "Added Synthetic Loss Measurement responder table" + + REVISION "201608030000Z" + DESCRIPTION + + "Added attribute cienaCesCfmSyntheticLossSessionFrameLossRatioNear and + cienaCesCfmSyntheticLossSessionFrameLossRatioFar to CienaCesCfmSyntheticLossSessionEntry." + + REVISION "201507270000Z" + DESCRIPTION + + "Added object cienaCesCfmServiceCCMRxStats to cienaCesCfmServiceEntry." + + REVISION "201505110000Z" + DESCRIPTION + + "Fixed trap OIDs from cienaCesCfmDelayMaximumDelay to cienaCesCfmDelayMsgMaximumDelay. " + + REVISION "201503020000Z" + DESCRIPTION + + "Added object cienaCesCfmMEPL2XformType to cienaCesCfmMEPEntry." + + REVISION "201404100000Z" + DESCRIPTION + + "Added new enumeration - i3dot33msecCCM (8) to the cienaCesCfmServiceCCMInterval object." + + REVISION "201401270000Z" + DESCRIPTION + + "Added new object cienaCesCfmGlobalStatsRxTotalMalformedFrames to + cienaCesCfmGlobalStats. + Added new objects cienaCesCfmGlobalCCMStatsRxTotalErrorCCM, cienaCesCfmGlobalCCMStatsRxTotalMalformedCCM, + cienaCesCfmGlobalCCMStatsRxTotalMEPCCM and cienaCesCfmGlobalCCMStatsRxTotalMIPCCM to + cienaCesCfmGlobalCCMStats. + Added new object cienaCesCfmGlobalLoopbackStatsRxTotalMalformedLBM to + cienaCesCfmGlobalLoopbackStats. + Added new objects cienaCesCfmMepStatsRxCCMWithErrorCCMFault, cienaCesCfmMepStatsRxCCMWithXCONFault, + cienaCesCfmMepStatsRxCCMWithRMEPLOCFault, cienaCesCfmMepStatsRxCCMWithRDI0, cienaCesCfmMepStatsRxCCMWithRDI1, + cienaCesCfmMepStatsRxCCMWithSequenceNumberMismatch, cienaCesCfmMepStatsRxCCMDroppedWithMalformedTlv to + cienaCesCfmMepStatsEntry." + + REVISION "201401160000Z" + DESCRIPTION + + "Added a new object cienaCesCfmGlobalSyntheticLossMeasurementStatsRxDropSLM to + cienaCesCfmGlobalSyntheticLossMeasurementStats." + + REVISION "201311050000Z" + DESCRIPTION + + "Added new objects for supporting Inter Frame Delay Variation in CienaCesCfmDelayMsgEntry + cienaCesCfmDelayMsgAverageDelayVariation,.. and cienaCesCfmDelayMsgMaximumDelayVariationThreshold + New traps added to support the Inter Frame Delay Variation Threshold variables + cienaCesCfmAverageDelayVariationTrapSet,.. and cienaCesCfmMaximumDelayVariationTrapClear" + + REVISION "201310290000Z" + DESCRIPTION + + "Added new objects for supporting synthetic loss global attributes cienaCesCfmGlobalSLMDefaultCount, + cienaCesCfmGlobalSLMDefaultInterval and cienaCesCfmGlobalSLMDefaultTimeout. Added new objects to + support synthetic loss global statistics cienaCesCfmGlobalSyntheticLossMeasurementStatsTxTotalSLM, + cienaCesCfmGlobalSyntheticLossMeasurementStatsTxTotalSLR, cienaCesCfmGlobalSyntheticLossMeasurementStatsRxTotalSLM, + cienaCesCfmGlobalSyntheticLossMeasurementStatsRxTotalSLR. + Added new objects for retrieving MEP level synthetic loss statistics cienaCesCfmMepStatsTxSyntheticLossMeasurementMessage, + cienaCesCfmMepStatsTxSyntheticLossMeasurementReply, cienaCesCfmMepStatsRxSyntheticLossMeasurementMessage, + cienaCesCfmMepStatsRxSyntheticLossMeasurementReply . + Added new table cienaCesCfmSyntheticLossSessionTable for retrieving synthetic loss test session parameters and results . + New traps added to support synthetic loss tests are cienaCesSyntheticLossSessionNearFaultTrap, + cienaCesSyntheticLossSessionFarFaultTrap, cienaCesSyntheticLossSessionNearFaultClearTrap and + cienaCesSyntheticLossSessionFarFaultClearTrap" + + REVISION "201110040000Z" + DESCRIPTION + + "Added new attributes cienaCesCfmState, cienaCesCfmEtherType, cienaCesCfmMEPHoldTime and cienaCesCfmY1731EtherType + under cienaCesCfmGlobal." + + REVISION "201107260000Z" + DESCRIPTION + + "Added new table cienaCesCfmRemoteMepStatsTable" + + REVISION "201012100000Z" + DESCRIPTION + + "cienaCesCfmService,cienaCesCfmMEP,cienaCesCfmRemoteMEP now support a larger number of objects. + + New tables cienaCesCfmMaintenanceDomainTable,cienaCesCfmServiceFrameBudgetTable, + + cienaCesCfmFrameBudgetGlobalTable are added. cienaCesCfmGlobalFrameBudgetTable has been deprecated." + + REVISION "201003280000Z" + DESCRIPTION + + "Initial creation." + + ::= { cienaCesConfig 4 } + + + + -- + + -- Node definitions + + -- + + cienaCesCfmMIBObjects OBJECT IDENTIFIER ::= { cienaCesCfmMIB 1 } + + + + cienaCesCfmService OBJECT IDENTIFIER ::= { cienaCesCfmMIBObjects 2 } + + + + cienaCesCfmMEP OBJECT IDENTIFIER ::= { cienaCesCfmMIBObjects 3} + + + + cienaCesCfmRemoteMEP OBJECT IDENTIFIER ::= { cienaCesCfmMIBObjects 4 } + + + + cienaCesCfmDelay OBJECT IDENTIFIER ::= { cienaCesCfmMIBObjects 5} + + + + cienaCesCfmFrameLoss OBJECT IDENTIFIER ::= { cienaCesCfmMIBObjects 6} + + + + cienaCesCfmServiceFaultNotifAttrs OBJECT IDENTIFIER ::= { cienaCesCfmMIBObjects 7 } + + + + cienaCesCfmMaintenance OBJECT IDENTIFIER ::= { cienaCesCfmMIBObjects 8 } + + + + cienaCesCfmServiceFrameBudget OBJECT IDENTIFIER ::= { cienaCesCfmMIBObjects 9 } + + + + cienaCesCfmFrameBudgetGlobal OBJECT IDENTIFIER ::= { cienaCesCfmMIBObjects 10 } + + + + cienaCesCfmGlobal OBJECT IDENTIFIER ::= { cienaCesCfmMIBObjects 11 } + + cienaCesCfmSyntheticLoss OBJECT IDENTIFIER ::= { cienaCesCfmMIBObjects 12 } + + + + -- Statistics + + cienaCesCfmStatisticsMIBObjects OBJECT IDENTIFIER ::= { cienaCesStatistics 4 } + + + + cienaCesCfmMibObjects OBJECT IDENTIFIER ::= { cienaCesCfmStatisticsMIBObjects 1 } + + + + cienaCesCfmGlobalMIBObjects OBJECT IDENTIFIER ::= { cienaCesCfmMibObjects 1 } + + + + cienaCesCfmGlobalFrameBudget OBJECT IDENTIFIER ::= { cienaCesCfmGlobalMIBObjects 2 } + + + + cienaCesCfmGlobalStats OBJECT IDENTIFIER ::= { cienaCesCfmGlobalMIBObjects 3 } + + + + cienaCesCfmGlobalCCMStats OBJECT IDENTIFIER ::= { cienaCesCfmGlobalMIBObjects 4 } + + + + cienaCesCfmGlobalLoopbackStats OBJECT IDENTIFIER ::= { cienaCesCfmGlobalMIBObjects 5 } + + + + cienaCesCfmGlobalLinkTraceStats OBJECT IDENTIFIER ::= { cienaCesCfmGlobalMIBObjects 6 } + + + + cienaCesCfmGlobalDelayMeasurementStats OBJECT IDENTIFIER ::= { cienaCesCfmGlobalMIBObjects 7 } + + + + cienaCesCfmGlobalLossMeasurementStats OBJECT IDENTIFIER ::= { cienaCesCfmGlobalMIBObjects 8 } + + cienaCesCfmGlobalSyntheticLossMeasurementStats OBJECT IDENTIFIER ::= { cienaCesCfmGlobalMIBObjects 9 } + + + cienaCesCfmServiceStats OBJECT IDENTIFIER ::= { cienaCesCfmMibObjects 2 } + + + + cienaCesCfmMepStats OBJECT IDENTIFIER ::= { cienaCesCfmMibObjects 3 } + + + + + + + + -- Notifications + + + + cienaCesCfmNotifMIBNotificationPrefix OBJECT IDENTIFIER ::= { cienaCesNotifications 5 } + + + + cienaCesCfmNotifMIBNotification OBJECT IDENTIFIER ::= { cienaCesCfmNotifMIBNotificationPrefix 0 } + + + + CfmDisplayString ::= TEXTUAL-CONVENTION + + DISPLAY-HINT "1x:" + + STATUS current + + DESCRIPTION + + "Specifies the CFM display string." + + SYNTAX OCTET STRING (SIZE(1..2)) + + + + CienaCesCfmInterfaceType ::= TEXTUAL-CONVENTION + + STATUS current + + DESCRIPTION "Interface type of the PM instance." + + SYNTAX INTEGER { + + subport(1), + + encapPbt(2), + + decapPbt(3), + + pbtService(4), + + mplsVc(5), + + unknown(99) + + } + + + + EthType ::= TEXTUAL-CONVENTION + + DISPLAY-HINT "1x:" + + STATUS current + + DESCRIPTION + + "Specifies the Ethertype." + + SYNTAX OCTET STRING (SIZE(1..2)) + + + CfmFrameLossRatio ::= TEXTUAL-CONVENTION + DISPLAY-HINT "d-4" + STATUS current + DESCRIPTION + "Denotes Frame Loss Ratio in accuracy of four digits. + So a value of 1000 here would mean 0.1% loss." + SYNTAX Unsigned32 (0..1000000) + +-- + +--Global Attributes + +-- + + cienaCesCfmState OBJECT-TYPE + + SYNTAX CienaGlobalState + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "This object indicates the globally configured CFM state." + + ::= { cienaCesCfmGlobal 1 } + + + + cienaCesCfmEtherType OBJECT-TYPE + + SYNTAX EthType + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "This object indicates the Ethertype value used for CFM frames." + + ::= { cienaCesCfmGlobal 2 } + + + + cienaCesCfmMEPHoldTime OBJECT-TYPE + + SYNTAX Integer32 + + UNITS "milliseconds" + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "This object indicates the time to hold a MEP in an inactive state." + + ::= { cienaCesCfmGlobal 3 } + + + + cienaCesCfmY1731EtherType OBJECT-TYPE + + SYNTAX EthType + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "This object indicates the optional alternate Ethertype for Y.1731 frames." + + ::= { cienaCesCfmGlobal 4 } + + cienaCesCfmGlobalSLMDefaultCount OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The global default count for synthetic loss measurement tests." + ::= { cienaCesCfmGlobal 5 } + + cienaCesCfmGlobalSLMDefaultInterval OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The global default interval for synthetic loss measurement tests. + + The value ranges from 3 to 7. + + The values 3-7 represent indices to CFM intervals as follows: + 3 --> 100ms, + 4 --> 1sec, + 5 --> 10sec, + 6 --> 1min, + 7 --> 10min." + ::= { cienaCesCfmGlobal 6 } + + cienaCesCfmGlobalSLMDefaultTimeout OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The global default timeout for synthetic loss measurement tests." + ::= { cienaCesCfmGlobal 7 } + + + -- + + -- CFM Service Table + + -- + + cienaCesCfmServiceTable OBJECT-TYPE + + SYNTAX SEQUENCE OF CienaCesCfmServiceEntry + + MAX-ACCESS not-accessible + + STATUS current + + DESCRIPTION + + "The (conceptual) table listing the configuration + + parameters for the CFM service table." + + ::= { cienaCesCfmService 1 } + + + + cienaCesCfmServiceEntry OBJECT-TYPE + + SYNTAX CienaCesCfmServiceEntry + + MAX-ACCESS not-accessible + + STATUS current + + DESCRIPTION + + "An entry (conceptual row) in the cienaCesCfmServiceTable." + + INDEX {cienaCesCfmServiceIndex} + + ::= { cienaCesCfmServiceTable 1 } + + + + CienaCesCfmServiceEntry ::= SEQUENCE { + + cienaCesCfmServiceIndex Unsigned32, + + cienaCesCfmServiceType INTEGER, + + cienaCesCfmServiceValue INTEGER, + + cienaCesCfmServiceAdminState CienaGlobalState, + + cienaCesCfmServiceOperState CienaGlobalState, + + cienaCesCfmServiceName DisplayString, + + cienaCesCfmServiceMdLevel INTEGER, + + cienaCesCfmServiceFaultState CienaGlobalState, + + cienaCesCfmServiceAlarmTime INTEGER, + + cienaCesCfmServiceCCMInterval INTEGER, + + cienaCesCfmServiceResetTime INTEGER, + + cienaCesCfmServiceLastFaultCCM CfmDisplayString, + + cienaCesCfmServiceRMEPFailureFlag TruthValue, + + cienaCesCfmServiceCCMErrorFlag TruthValue, + + cienaCesCfmServiceCrossConnectErrorFlag TruthValue, + + cienaCesCfmServiceNumMEP Counter32, + + cienaCesCfmServiceNumRemoteMEP Counter32, + + cienaCesCfmServiceNumActiveMEP Counter32, + + cienaCesCfmServiceNextMepId Unsigned32, + + cienaCesCfmServiceAlarmPriority Unsigned32, + + cienaCesCfmServiceNumCCMForFault Unsigned32, + + cienaCesCfmServiceDMMInterval INTEGER, + + cienaCesCfmServiceLMMInterval INTEGER, + + cienaCesCfmServiceCCMLossStatsState CienaGlobalState, + + cienaCesCfmServiceCCMLossBucketInterval INTEGER, + + cienaCesCfmServiceY1731 TruthValue, + + cienaCesCfmServiceTlvSenderIdType INTEGER, + + cienaCesCfmServiceRMEPHoldTime Unsigned32, + + cienaCesCfmServiceCCMTxState CienaGlobalState, + + cienaCesCfmServicePortStatusFlag TruthValue, + + cienaCesCfmServiceRDIFlag TruthValue, + + cienaCesCfmServiceInstabilityFlag TruthValue, + + cienaCesCfmServiceRMEPAging TruthValue, + + cienaCesCfmServiceRMEPDiscovery TruthValue, + + cienaCesCfmServiceChargedAgainstGlobalBudget TruthValue, + + cienaCesCfmServiceControlModuleFrameBudget Counter32, + + cienaCesCfmServiceMulticastDa TruthValue, + + cienaCesCfmServiceCCMRxStats TruthValue + } + + + + cienaCesCfmServiceIndex OBJECT-TYPE + + SYNTAX Unsigned32 + + MAX-ACCESS not-accessible + + STATUS current + + DESCRIPTION + + "A unique identifier for a CFM domain entry." + + ::= { cienaCesCfmServiceEntry 1 } + + + + cienaCesCfmServiceType OBJECT-TYPE + + SYNTAX INTEGER { + + mplsVs(1), + + ethVs(2), + + vlan(3), + + pbtTunnel(4), + + vs(5), + + other(9) + + } + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "This object is used to specify the service type. + + The meaning of cienaCesCfmServiceValue depends on the value of this MIB object. + + This MIB object along with cienaCesCfmServiceValue must be unique for each entry in this table." + + ::= { cienaCesCfmServiceEntry 2 } + + + + cienaCesCfmServiceValue OBJECT-TYPE + + SYNTAX INTEGER + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "This object is used to specify the service value. + + The meaning of this object depends on the value of cienaCesCfmServiceType. + + This MIB object along with cienaCesCfmServiceType must be unique for each entry in this table." + + ::= { cienaCesCfmServiceEntry 3 } + + + + cienaCesCfmServiceAdminState OBJECT-TYPE + + SYNTAX CienaGlobalState + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "This object indicates the administrative state of CFM for this service type." + + ::= { cienaCesCfmServiceEntry 4 } + + + + cienaCesCfmServiceOperState OBJECT-TYPE + + SYNTAX CienaGlobalState + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "This object indicates the operational state of CFM for this service type." + + ::= { cienaCesCfmServiceEntry 5 } + + + + cienaCesCfmServiceName OBJECT-TYPE + + SYNTAX DisplayString + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "This MIB object indicates the CFM service name." + + ::= { cienaCesCfmServiceEntry 6 } + + + + cienaCesCfmServiceMdLevel OBJECT-TYPE + + SYNTAX INTEGER + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "This MIB object indicates the maintenance domain level associated with the CFM service." + + ::= { cienaCesCfmServiceEntry 7 } + + + + cienaCesCfmServiceFaultState OBJECT-TYPE + + SYNTAX CienaGlobalState + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "When this object's state is disabled it suppresses all the corresponding CFM service related + + traps." + + DEFVAL { enabled } + + ::= { cienaCesCfmServiceEntry 8 } + + + + cienaCesCfmServiceAlarmTime OBJECT-TYPE + + SYNTAX INTEGER + + UNITS "milliseconds" + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "This MIB object indicates the time interval that a service fault detected + + by cienaCesCfmServiceType must be present prior to triggering a fault alarm." + + ::= { cienaCesCfmServiceEntry 9 } + + + + cienaCesCfmServiceCCMInterval OBJECT-TYPE + + SYNTAX INTEGER { + + unknown(0), + + i4msecCCM(1), + + i10msecCCM(2), + + i100msecCCM(3), + + i1secCCM(4), + + i10secCCM(5), + + i1minCCM(6), + + i10minCCM(7), + + i3dot33msecCCM(8) + + } + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "This MIB object identifies the CCM transmission interval index for the service specified by cienaCesCfmServiceType. + + This determines the frequency at which CCMs are transmitted. The length of the interval increases exponentially + + with the index value. When the interval is zero (0), CCM transmission is disabled from all MEPs in the MA." + + ::= { cienaCesCfmServiceEntry 10 } + + + + cienaCesCfmServiceResetTime OBJECT-TYPE + + SYNTAX INTEGER + + UNITS "milliseconds" + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "This MIB object indicates the time interval during which no service faults can be detected + + before the service will reset a fault alarm." + + DEFVAL {3000} + + ::= { cienaCesCfmServiceEntry 11 } + + + + cienaCesCfmServiceLastFaultCCM OBJECT-TYPE + + SYNTAX CfmDisplayString + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "This MIB object shows the last received CCM fault." + + ::= { cienaCesCfmServiceEntry 12 } + + + + cienaCesCfmServiceRMEPFailureFlag OBJECT-TYPE + + SYNTAX TruthValue + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "This MIB object indicates whether the RMEP failure flag is set." + + ::= { cienaCesCfmServiceEntry 13 } + + + + cienaCesCfmServiceCCMErrorFlag OBJECT-TYPE + + SYNTAX TruthValue + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "This MIB object indicates whether the CCM error flag is set." + + ::= { cienaCesCfmServiceEntry 14 } + + + + cienaCesCfmServiceCrossConnectErrorFlag OBJECT-TYPE + + SYNTAX TruthValue + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "This MIB object indicates whether the cross-connect error flag is set." + + ::= { cienaCesCfmServiceEntry 15 } + + + + cienaCesCfmServiceNumMEP OBJECT-TYPE + + SYNTAX Counter32 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "This MIB object shows the total number of MEPs." + + ::= { cienaCesCfmServiceEntry 16 } + + + + cienaCesCfmServiceNumRemoteMEP OBJECT-TYPE + + SYNTAX Counter32 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "This MIB object shows the total number of remote MEPs." + + ::= { cienaCesCfmServiceEntry 17 } + + + + cienaCesCfmServiceNumActiveMEP OBJECT-TYPE + + SYNTAX Counter32 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "This MIB object shows the number of active MEPs." + + ::= { cienaCesCfmServiceEntry 18 } + + + + cienaCesCfmServiceNextMepId OBJECT-TYPE + + SYNTAX Unsigned32 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "This MIB object indicates the next MEP ID for the given service." + + ::= { cienaCesCfmServiceEntry 19 } + + + + cienaCesCfmServiceAlarmPriority OBJECT-TYPE + + SYNTAX Unsigned32 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "This MIB object indicates the alarm priority for a given service. + + The value ranges from 1 to 5. + + The value 1-5 represent the priority according to faults: + 1 --> RDI, + 2 --> Mac Status, + 3 --> Remote Mep, + 4 --> Error Ccm, + 5 --> Xcon Ccm." + + DEFVAL {3} + + ::= { cienaCesCfmServiceEntry 20 } + + + + cienaCesCfmServiceNumCCMForFault OBJECT-TYPE + + SYNTAX Unsigned32 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "This MIB object indicates the number of CCM frames that must go undelivered + + for the PBB-TE tunnel before declaring the PBB-TE tunnel as operationally down. + + This object is only applicable if cienaCesCfmServiceType is set to pbtTunnel, else this object + + should be ignored." + + DEFVAL {3} + + ::= { cienaCesCfmServiceEntry 21 } + + + + + + cienaCesCfmServiceDMMInterval OBJECT-TYPE + + SYNTAX INTEGER + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "This MIB object indicates the DMM transmission interval index for the service specified by cienaCesCfmServiceType. + + This determines the frequency at which DMMs are transmitted. The length of the interval increases exponentially + + with the index value. The value ranges from 3 to 7. The values 3-7 represent indices to CFM intervals as follows: + 3 --> 100ms, + 4 --> 1sec, + 5 --> 10sec, + 6 --> 1min, + 7 --> 10min." + + ::= { cienaCesCfmServiceEntry 22 } + + + + cienaCesCfmServiceLMMInterval OBJECT-TYPE + + SYNTAX INTEGER + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "This MIB object indicates the LMM transmission interval index for the service specified by cienaCesCfmServiceType. + + This determines the frequency at which LMMs are transmitted. The length of the interval increases exponentially + + with the index value. The value ranges from 1 to 7. The values 1-7 represent indices to CFM intervals as follows: + 1 --> 3.33ms, + 2 --> 10ms, + 3 --> 100ms, + 4 --> 1sec, + 5 --> 10sec, + 6 --> 1min, + 7 --> 10min." + + ::= { cienaCesCfmServiceEntry 23 } + + + + cienaCesCfmServiceCCMLossStatsState OBJECT-TYPE + + SYNTAX CienaGlobalState + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "This object indicates the operational state of CCM loss accounting + + for RMEPs learned by this service type." + + DEFVAL {enabled} + + ::= { cienaCesCfmServiceEntry 24 } + + + + cienaCesCfmServiceCCMLossBucketInterval OBJECT-TYPE + + SYNTAX INTEGER + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "This object indicates the interval in minutes that each of the 96 + + CCM loss history buckets spans. The default is 15 minutes, which + + means the default history covers 24 hours." + + ::= { cienaCesCfmServiceEntry 25 } + + + + cienaCesCfmServiceY1731 OBJECT-TYPE + + SYNTAX TruthValue + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "This object indicates whether Y.1731 is enabled for the service." + + ::= { cienaCesCfmServiceEntry 26 } + + + + cienaCesCfmServiceTlvSenderIdType OBJECT-TYPE + + SYNTAX INTEGER { + + none(1), + + chassis(2), + + manage(3), + + chassisManage(4) + + } + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "This MIB object indicates the sender ID TLV Type." + + DEFVAL {chassis} + + ::= { cienaCesCfmServiceEntry 27 } + + + + cienaCesCfmServiceRMEPHoldTime OBJECT-TYPE + + SYNTAX Unsigned32 + + UNITS "milliseconds" + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "This MIB object indicates the remote MEP hold time in milliseconds." + + DEFVAL {2500} + + ::= { cienaCesCfmServiceEntry 28 } + + + + cienaCesCfmServiceCCMTxState OBJECT-TYPE + + SYNTAX CienaGlobalState + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "This MIB object indicates the administrative state of the CCM Tx." + + DEFVAL {enabled} + + ::= { cienaCesCfmServiceEntry 29 } + + + + cienaCesCfmServicePortStatusFlag OBJECT-TYPE + + SYNTAX TruthValue + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "This MIB object shows the port status defect flag." + + ::= { cienaCesCfmServiceEntry 30 } + + + + cienaCesCfmServiceRDIFlag OBJECT-TYPE + + SYNTAX TruthValue + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "This MIB object shows the RDI defect flag." + + ::= { cienaCesCfmServiceEntry 31 } + + + + cienaCesCfmServiceInstabilityFlag OBJECT-TYPE + + SYNTAX TruthValue + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "This MIB object shows the instability defect flag." + + ::= { cienaCesCfmServiceEntry 32 } + + + + cienaCesCfmServiceRMEPAging OBJECT-TYPE + + SYNTAX TruthValue + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "Controls automatic remote MEP aging for the service." + + ::= { cienaCesCfmServiceEntry 33 } + + + + cienaCesCfmServiceRMEPDiscovery OBJECT-TYPE + + SYNTAX TruthValue + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "Controls automatic remote MEP discovery for the service." + + ::= { cienaCesCfmServiceEntry 34 } + + + + cienaCesCfmServiceChargedAgainstGlobalBudget OBJECT-TYPE + + SYNTAX TruthValue + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "This MIB object reflects if this service is charged against + + the global frame budget." + + ::= { cienaCesCfmServiceEntry 35 } + + + + cienaCesCfmServiceControlModuleFrameBudget OBJECT-TYPE + + SYNTAX Counter32 + + UNITS "frames/sec" + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "CFM frame budget for the control timing module for the given service." + + ::= { cienaCesCfmServiceEntry 36 } + + + + + + cienaCesCfmServiceMulticastDa OBJECT-TYPE + + SYNTAX TruthValue + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "This object indicates if multicast DA mode is enabled for the service. This object is relevant + + when the cienaCesCfmServiceType is PBT." + + DEFVAL {false} + + ::= { cienaCesCfmServiceEntry 37 } + + + + cienaCesCfmServiceCCMRxStats OBJECT-TYPE + + SYNTAX TruthValue + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "Controls cfm rx debug stats for the service." + + ::= { cienaCesCfmServiceEntry 38 } + + + + + + -- + + -- CFM Remote MEP Table + + -- + + cienaCesCfmRemoteMEPTable OBJECT-TYPE + + SYNTAX SEQUENCE OF CienaCesCfmRemoteMEPEntry + + MAX-ACCESS not-accessible + + STATUS current + + DESCRIPTION + + "The (conceptual) table listing the display + + parameters for the remote MEP table." + + ::= { cienaCesCfmRemoteMEP 1 } + + + + cienaCesCfmRemoteMEPEntry OBJECT-TYPE + + SYNTAX CienaCesCfmRemoteMEPEntry + + MAX-ACCESS not-accessible + + STATUS current + + DESCRIPTION + + "An entry (conceptual row) in the cienaCesCfmRemoteMEPTable." + + INDEX {cienaCesCfmServiceIndex, cienaCesCfmRemoteMEPID} + + ::= { cienaCesCfmRemoteMEPTable 1 } + + + + CienaCesCfmRemoteMEPEntry ::= SEQUENCE { + + cienaCesCfmRemoteMEPID Unsigned32, + + cienaCesCfmRemoteMEPMacAddr MacAddress, + + cienaCesCfmRemoteMEPAdminState CienaGlobalState, + + cienaCesCfmRemoteMEPOperState INTEGER, + + cienaCesCfmRemoteMEPTime TimeTicks, + + cienaCesCfmRemoteMEPKLastMacStatus TruthValue, + + cienaCesCfmRemoteMEPFailureFlag TruthValue, + + cienaCesCfmRemoteMEPCCMErrorFlag TruthValue, + + cienaCesCfmRemoteMEPRDIErrorFlag TruthValue, + + cienaCesCfmRemoteMEPSubPortName DisplayString, + + cienaCesCfmRemoteMEPServiceName DisplayString, + + cienaCesCfmRemoteMEPLastPortStatus INTEGER, + + cienaCesCfmRemoteMEPLastInterfaceStatus INTEGER, + + cienaCesCfmRemoteMEPCCMLevel INTEGER, + + cienaCesCfmRemoteMEPHoldState INTEGER + + } + + + + cienaCesCfmRemoteMEPID OBJECT-TYPE + + SYNTAX Unsigned32 + + MAX-ACCESS not-accessible + + STATUS current + + DESCRIPTION + + "This object is used as an index in the table and is used to specify the MEP ID." + + ::= { cienaCesCfmRemoteMEPEntry 1 } + + + + cienaCesCfmRemoteMEPMacAddr OBJECT-TYPE + + SYNTAX MacAddress + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "This object is used to specify the MAC address of the logical port where the remote MEP is configured." + + ::= { cienaCesCfmRemoteMEPEntry 2 } + + + + cienaCesCfmRemoteMEPAdminState OBJECT-TYPE + + SYNTAX CienaGlobalState + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "This object is used to specify the administrative state of the remote MEP state machine." + + ::= { cienaCesCfmRemoteMEPEntry 3 } + + + + cienaCesCfmRemoteMEPOperState OBJECT-TYPE + + SYNTAX INTEGER { + + disabled(1), + + enabled(2), + + hold(3) + + } + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "This object is used to specify the operational state of the remote MEP state machine." + + ::= { cienaCesCfmRemoteMEPEntry 4 } + + + + cienaCesCfmRemoteMEPTime OBJECT-TYPE + + SYNTAX TimeTicks + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "This object is used to specify the time at which the remote MEP state machine last + + entered RMEP_FAILED or RMEP_OK states." + + ::= { cienaCesCfmRemoteMEPEntry 5 } + + + + cienaCesCfmRemoteMEPKLastMacStatus OBJECT-TYPE + + SYNTAX TruthValue + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "This object is used to specify the last MAC status received." + + ::= { cienaCesCfmRemoteMEPEntry 6 } + + + + cienaCesCfmRemoteMEPFailureFlag OBJECT-TYPE + + SYNTAX TruthValue + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "This object is used to specify the remote MEP failure flag." + + ::= { cienaCesCfmRemoteMEPEntry 7 } + + + + cienaCesCfmRemoteMEPCCMErrorFlag OBJECT-TYPE + + SYNTAX TruthValue + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "This object is used to specify the MEP CCM error flag." + + ::= { cienaCesCfmRemoteMEPEntry 8 } + + + + cienaCesCfmRemoteMEPRDIErrorFlag OBJECT-TYPE + + SYNTAX TruthValue + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "This object is used to specify the MEP RDI error flag." + + ::= { cienaCesCfmRemoteMEPEntry 9 } + + + + cienaCesCfmRemoteMEPSubPortName OBJECT-TYPE + + SYNTAX DisplayString + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "The object indicates the subport name of the remote MEP." + + ::= { cienaCesCfmRemoteMEPEntry 10 } + + + + cienaCesCfmRemoteMEPServiceName OBJECT-TYPE + + SYNTAX DisplayString + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "This object is used to specify the service name of the remote MEP." + + ::= { cienaCesCfmRemoteMEPEntry 11 } + + + + cienaCesCfmRemoteMEPLastPortStatus OBJECT-TYPE + + SYNTAX INTEGER { + + unknown(1), + + none(2), + + blocked(3), + + up(4) + + } + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "This object is used as to specify the remote MEP last port status." + + ::= { cienaCesCfmRemoteMEPEntry 12 } + + + + cienaCesCfmRemoteMEPLastInterfaceStatus OBJECT-TYPE + + SYNTAX INTEGER { + + none(1), + + up(2), + + down(3), + + testing(4), + + dormant(5), + + lowerLayerDown(6), + + notPresent(7) + + } + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "This object is used as to specify the remote MEP interface status." + + ::= { cienaCesCfmRemoteMEPEntry 13 } + + + + cienaCesCfmRemoteMEPCCMLevel OBJECT-TYPE + + SYNTAX INTEGER + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "This object indicates the remote MEP CCM level." + + ::= { cienaCesCfmRemoteMEPEntry 14 } + + + + cienaCesCfmRemoteMEPHoldState OBJECT-TYPE + + SYNTAX INTEGER { + + disable(1), + + enable(2), + + lock(3) + + } + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "This object indicates the hold state for the remote MEP entry." + + ::= { cienaCesCfmRemoteMEPEntry 15 } + + + + + + -- + + -- CFM MEP Table + + -- + + cienaCesCfmMEPTable OBJECT-TYPE + + SYNTAX SEQUENCE OF CienaCesCfmMEPEntry + + MAX-ACCESS not-accessible + + STATUS current + + DESCRIPTION + + "The (conceptual) table listing the configuration + + parameters for the CFM MEP table." + + ::= { cienaCesCfmMEP 1 } + + + + cienaCesCfmMEPEntry OBJECT-TYPE + + SYNTAX CienaCesCfmMEPEntry + + MAX-ACCESS not-accessible + + STATUS current + + DESCRIPTION + + "An entry (conceptual row) in the cienaCesCfmMEPTable." + + INDEX {cienaCesCfmServiceIndex, cienaCesCfmMEPId} + + ::= { cienaCesCfmMEPTable 1 } + + + + CienaCesCfmMEPEntry ::= SEQUENCE { + + cienaCesCfmMEPId Unsigned32, + + cienaCesCfmMEPMacAddr MacAddress, + + cienaCesCfmMEPAdminState CienaGlobalState, + + cienaCesCfmMEPOperState CienaGlobalState, + + cienaCesCfmMEPDirection INTEGER, + + cienaCesCfmMEPCCMState CienaGlobalState , + + cienaCesCfmMEPCCMPriority INTEGER, + + cienaCesCfmMEPLTMPriority INTEGER, + + cienaCesCfmMEPLiType INTEGER, + + cienaCesCfmMEPLiIndex Unsigned32, + + cienaCesCfmMEPServiceName DisplayString, + + cienaCesCfmMEPSubPortName DisplayString, + + cienaCesCfmMEPVsPbtName DisplayString, + + cienaCesCfmMEPLogicalPortName DisplayString, + + cienaCesCfmMEPSubPortIndex Unsigned32, + + cienaCesCfmMEPEncapsulation INTEGER, + + cienaCesCfmMEPLeadPortSlotIndex Unsigned32, + + cienaCesCfmMEPPBTBvid Unsigned32, + + cienaCesCfmMEPPBTEtype Unsigned32, + + cienaCesCfmMEPL2XformType INTEGER, + + cienaCesCfmMEPSignalDegradeMonitoringStatus TruthValue, + + cienaCesCfmMEPSignalDegradeTriggerMode INTEGER + + } + + + + cienaCesCfmMEPId OBJECT-TYPE + + SYNTAX Unsigned32 + + MAX-ACCESS not-accessible + + STATUS current + + DESCRIPTION + + "This MIB object is used as the index in the table and indicates + + the MEP ID for the given service." + + ::= { cienaCesCfmMEPEntry 1 } + + + + cienaCesCfmMEPMacAddr OBJECT-TYPE + + SYNTAX MacAddress + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "This object indicates the MAC address received on the + + given service and MEP ID." + + ::= { cienaCesCfmMEPEntry 2 } + + + + cienaCesCfmMEPAdminState OBJECT-TYPE + + SYNTAX CienaGlobalState + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "This object is used to specify the administrative state of the CFM MEP." + + ::= { cienaCesCfmMEPEntry 3 } + + + + cienaCesCfmMEPOperState OBJECT-TYPE + + SYNTAX CienaGlobalState + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "This object is used to specify the operational state of the CFM MEP." + + ::= { cienaCesCfmMEPEntry 4 } + + + + cienaCesCfmMEPDirection OBJECT-TYPE + + SYNTAX INTEGER { + + up(1), + + down(2) + + } + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "This object is used to specify the MEP direction of the service." + + + + ::= { cienaCesCfmMEPEntry 5 } + + + + cienaCesCfmMEPCCMState OBJECT-TYPE + + SYNTAX CienaGlobalState + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "This object indicates the CCM transmission for the service specified by cienaCesCfmServiceType." + + ::= { cienaCesCfmMEPEntry 6 } + + + + cienaCesCfmMEPCCMPriority OBJECT-TYPE + + SYNTAX INTEGER + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "This object indicates the priority of CCM messages transmitted." + + ::= { cienaCesCfmMEPEntry 7 } + + + + cienaCesCfmMEPLTMPriority OBJECT-TYPE + + SYNTAX INTEGER + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "This object indicates the priority received on the given service and port." + + ::= { cienaCesCfmMEPEntry 8 } + + + + cienaCesCfmMEPLiType OBJECT-TYPE + + SYNTAX INTEGER { + + vs(1), + + pbtService(2), + + mplsStaticPeMeshVC(3), + + mplsDynamicPeMeshVC(4), + + mplsStaticPeSpokeVC(5), + + mplsDynamicPeSpokeVC(6), + + mplsStaticMtuSpokeVC(7), + + mplsDynamicMtuSpokeVC(8), + + none(99) + + } + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "This object indicates the logical interface type on which the MEP is created." + + ::= { cienaCesCfmMEPEntry 9 } + + + + cienaCesCfmMEPLiIndex OBJECT-TYPE + + SYNTAX Unsigned32 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "This object indicates the logical interface index for creating the MEP." + + ::= { cienaCesCfmMEPEntry 10 } + + + + cienaCesCfmMEPServiceName OBJECT-TYPE + + SYNTAX DisplayString + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "This object is used to specify the service name assigned to this port." + + ::= { cienaCesCfmMEPEntry 11 } + + + + cienaCesCfmMEPSubPortName OBJECT-TYPE + + SYNTAX DisplayString + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "This object indicates the sub-port, PBB-TE service or MPLS VC name assigned to the given service and port." + + ::= { cienaCesCfmMEPEntry 12 } + + + + cienaCesCfmMEPVsPbtName OBJECT-TYPE + + SYNTAX DisplayString + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "This object indicates the virtual switch or PBB-TE tunnel assigned to the given service and port." + + ::= { cienaCesCfmMEPEntry 13 } + + + + cienaCesCfmMEPLogicalPortName OBJECT-TYPE + + SYNTAX DisplayString + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "This object indicates the logical port name assigned to the given service and port." + + ::= { cienaCesCfmMEPEntry 14 } + + + + cienaCesCfmMEPSubPortIndex OBJECT-TYPE + + SYNTAX Unsigned32 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "This object is used to specify the CFM sub-port index." + + ::= { cienaCesCfmMEPEntry 15 } + + + + cienaCesCfmMEPEncapsulation OBJECT-TYPE + + SYNTAX INTEGER { + + ieee802dot1d(1), + + pbtCfmEncap(2) + + } + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "This object is used to specify the encapsulation applied to the service and port." + + ::= { cienaCesCfmMEPEntry 16 } + + + + cienaCesCfmMEPLeadPortSlotIndex OBJECT-TYPE + + SYNTAX Unsigned32 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "This object is used as to specify the agent slot that the MEP is in." + + ::= { cienaCesCfmMEPEntry 17 } + + + + cienaCesCfmMEPPBTBvid OBJECT-TYPE + + SYNTAX Unsigned32 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "This object indicates the BVID assigned to the given service and port." + + ::= { cienaCesCfmMEPEntry 18 } + + + + cienaCesCfmMEPPBTEtype OBJECT-TYPE + + SYNTAX Unsigned32 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "This object indicates the Ethertype assigned to the given service and port." + + ::= { cienaCesCfmMEPEntry 19 } + + + cienaCesCfmMEPL2XformType OBJECT-TYPE + + SYNTAX INTEGER { + + no-op(1), + + auto(2) + } + + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "This object indicates the type of MEP L2 transform. + no-op(1) type indicates that there is no MEP level transform. + auto(2) type indicates that the MEP inherits the sub-port vtag-stack." + + ::= { cienaCesCfmMEPEntry 20 } + + + cienaCesCfmMEPSignalDegradeMonitoringStatus OBJECT-TYPE + + SYNTAX TruthValue + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "This object enables/disables signal degrading monitoring on the mep." + + DEFVAL { false } + + ::= { cienaCesCfmMEPEntry 21 } + + + cienaCesCfmMEPSignalDegradeTriggerMode OBJECT-TYPE + + SYNTAX INTEGER { + + nearEnd(1), + + nearFarEnd(2) + } + + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "This object sets the signal degrade trigger mode on the mep. + nearEnd: In this mode, near end frame loss shall be compared with cienaCesCfmSyntheticLossSessionSdSetThreshold + and cienaCesCfmSyntheticLossSessionSdClearThreshold. + nearFarEnd: In this mode, both near end and far end frame loss shall be compared with + cienaCesCfmSyntheticLossSessionSdSetThreshold and cienaCesCfmSyntheticLossSessionSdClearThreshold." + + DEFVAL { nearEnd } + + ::= { cienaCesCfmMEPEntry 22 } + + + -- + + -- Delay Measurement Msg table + + -- + + cienaCesCfmDelayMsgTable OBJECT-TYPE + + SYNTAX SEQUENCE OF CienaCesCfmDelayMsgEntry + + MAX-ACCESS not-accessible + + STATUS current + + DESCRIPTION + + "The (conceptual) table listing the configuration + + parameters for the DelayMeasurementMsg." + + + + ::= { cienaCesCfmDelay 1 } + + + + cienaCesCfmDelayMsgEntry OBJECT-TYPE + + SYNTAX CienaCesCfmDelayMsgEntry + + MAX-ACCESS not-accessible + + STATUS current + + DESCRIPTION + + "An entry (conceptual row) in the cienaCesCfmDelayMsgTable." + + INDEX {cienaCesCfmServiceIndex, cienaCesCfmDelayMsgLocalMEPId} + + ::= { cienaCesCfmDelayMsgTable 1 } + + + + CienaCesCfmDelayMsgEntry ::= SEQUENCE { + + cienaCesCfmDelayMsgLocalMEPId INTEGER, + + cienaCesCfmDelayMsgTargetMEPID Unsigned32, + + cienaCesCfmDelayMsgServiceName DisplayString, + + cienaCesCfmDelayMsgAverageDelayThreshold INTEGER, + + cienaCesCfmDelayMsgAverageJitterThreshold INTEGER, + + cienaCesCfmDelayMsgMaximumDelayThreshold INTEGER, + + cienaCesCfmDelayMsgMaximumJitterThreshold INTEGER, + + cienaCesCfmDelayMsgAverageDelay Unsigned32, + + cienaCesCfmDelayMsgAverageJitter Unsigned32, + + cienaCesCfmDelayMsgMaximumDelay Unsigned32, + + cienaCesCfmDelayMsgMaximumJitter Unsigned32, + + cienaCesCfmDelayMsgMinimumDelay Unsigned32, + + cienaCesCfmDelayMsgMinimumJitter Unsigned32, + + cienaCesCfmDelayMsgAverageDelayVariation Unsigned32, + + cienaCesCfmDelayMsgMaximumDelayVariation Unsigned32, + + cienaCesCfmDelayMsgMinimumDelayVariation Unsigned32, + + cienaCesCfmDelayMsgAverageDelayVariationThreshold Integer32, + + cienaCesCfmDelayMsgMaximumDelayVariationThreshold Integer32, + + cienaCesCfmDelayMsgPriority Unsigned32, + + cienaCesCfmDelayMsgCount Unsigned32, + + cienaCesCfmDelayMsgIterations Unsigned32, + + cienaCesCfmDelayMsgRepeatDelay Unsigned32, + + cienaCesCfmDelayMsgDuration Unsigned32 + + } + + + + cienaCesCfmDelayMsgLocalMEPId OBJECT-TYPE + + SYNTAX INTEGER + + MAX-ACCESS not-accessible + + STATUS current + + DESCRIPTION + + "This object is used to specify the local MEP ID." + + ::= { cienaCesCfmDelayMsgEntry 1 } + + + + cienaCesCfmDelayMsgTargetMEPID OBJECT-TYPE + + SYNTAX Unsigned32 (1..8191) + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "This object is used to specify the MEP ID." + + ::= { cienaCesCfmDelayMsgEntry 2 } + + + + cienaCesCfmDelayMsgServiceName OBJECT-TYPE + + SYNTAX DisplayString (SIZE(1..31)) + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "This object indicates the service associated with the + + delay message." + + ::= { cienaCesCfmDelayMsgEntry 3 } + + + + cienaCesCfmDelayMsgAverageDelayThreshold OBJECT-TYPE + + SYNTAX INTEGER (1..65535) + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "This object indicates the threshold for the average delay in microseconds." + + ::= {cienaCesCfmDelayMsgEntry 4 } + + + + cienaCesCfmDelayMsgAverageJitterThreshold OBJECT-TYPE + + SYNTAX INTEGER (1..65535) + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "This object indicates the threshold value for average jitter in microseconds." + + ::= { cienaCesCfmDelayMsgEntry 5 } + + + + cienaCesCfmDelayMsgMaximumDelayThreshold OBJECT-TYPE + + SYNTAX INTEGER (1..65535) + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "This object indicates the threshold for the maximum delay." + + ::= {cienaCesCfmDelayMsgEntry 6 } + + + + cienaCesCfmDelayMsgMaximumJitterThreshold OBJECT-TYPE + + SYNTAX INTEGER (1..65535) + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "This object indicates the threshold value for maximum jitter." + + ::= { cienaCesCfmDelayMsgEntry 7 } + + + + cienaCesCfmDelayMsgAverageDelay OBJECT-TYPE + + SYNTAX Unsigned32 + + UNITS "microseconds" + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "This object indicates the average delay." + + ::= { cienaCesCfmDelayMsgEntry 8 } + + + + cienaCesCfmDelayMsgAverageJitter OBJECT-TYPE + + SYNTAX Unsigned32 + + UNITS "microseconds" + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "This object indicates the average jitter." + + ::= { cienaCesCfmDelayMsgEntry 9 } + + + + cienaCesCfmDelayMsgMaximumDelay OBJECT-TYPE + + SYNTAX Unsigned32 + + UNITS "microseconds" + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "This object indicates the maximum delay." + + ::= { cienaCesCfmDelayMsgEntry 10 } + + + + cienaCesCfmDelayMsgMaximumJitter OBJECT-TYPE + + SYNTAX Unsigned32 + + UNITS "microseconds" + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "This object indicates the maximum jitter." + + ::= { cienaCesCfmDelayMsgEntry 11 } + + + + cienaCesCfmDelayMsgMinimumDelay OBJECT-TYPE + + SYNTAX Unsigned32 + + UNITS "microseconds" + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "This object indicates the minimum delay." + + ::= { cienaCesCfmDelayMsgEntry 12 } + + + + cienaCesCfmDelayMsgMinimumJitter OBJECT-TYPE + + SYNTAX Unsigned32 + + UNITS "microseconds" + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "This object indicates the minimum jitter." + + ::= { cienaCesCfmDelayMsgEntry 13 } + + cienaCesCfmDelayMsgAverageDelayVariation OBJECT-TYPE + SYNTAX Unsigned32 + UNITS "microseconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object indicates the Average Inter Frame Delay Variation." + ::= { cienaCesCfmDelayMsgEntry 14 } + + cienaCesCfmDelayMsgMaximumDelayVariation OBJECT-TYPE + SYNTAX Unsigned32 + UNITS "microseconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object indicates the Maximum Inter Frame Delay Variation." + ::= { cienaCesCfmDelayMsgEntry 15 } + + cienaCesCfmDelayMsgMinimumDelayVariation OBJECT-TYPE + SYNTAX Unsigned32 + UNITS "microseconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object indicates the Minimum Inter Frame Delay Variation." + ::= { cienaCesCfmDelayMsgEntry 16 } + + cienaCesCfmDelayMsgAverageDelayVariationThreshold OBJECT-TYPE + SYNTAX Integer32 (-1..65535) + UNITS "microseconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object indicates the threshold value for average Inter Frame Delay Variation. + A value of -1 disables the generation of faults. A value of 0 or greater + is compared to the Average Delay Variation measured in the test and a fault is generated + if the threshold is exceeded." + ::= { cienaCesCfmDelayMsgEntry 17 } + + cienaCesCfmDelayMsgMaximumDelayVariationThreshold OBJECT-TYPE + SYNTAX Integer32 (-1..65535) + UNITS "microseconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object indicates the threshold value for maximum Inter Frame Delay Variation. + A value of -1 disables the generation of faults. A value of 0 or greater + is compared to the Maximum Delay Variation measured in the test and a fault is generated + if the threshold is exceeded." + ::= { cienaCesCfmDelayMsgEntry 18 } + + cienaCesCfmDelayMsgPriority OBJECT-TYPE + SYNTAX Unsigned32 (0..7) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object specifies the priority that will be encoded in the DMM message." + ::= { cienaCesCfmDelayMsgEntry 19 } + + cienaCesCfmDelayMsgCount OBJECT-TYPE + SYNTAX Unsigned32 (2..65535) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object specifies the number of DMM messages that will be transmitted for one Iteration." + ::= { cienaCesCfmDelayMsgEntry 20 } + + cienaCesCfmDelayMsgIterations OBJECT-TYPE + SYNTAX Unsigned32 (0..60) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object specifies the number of iterations the test has to be conducted. + A zero value means that test is continuous, and iterations are infinite. " + ::= { cienaCesCfmDelayMsgEntry 21 } + + cienaCesCfmDelayMsgRepeatDelay OBJECT-TYPE + SYNTAX Unsigned32 (0..1440) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object specifies the delay in minutes between consecutive test iterations." + ::= { cienaCesCfmDelayMsgEntry 22 } + + cienaCesCfmDelayMsgDuration OBJECT-TYPE + SYNTAX Unsigned32 (0..65535) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object specifies the duration of time the test took in seconds to complete one iteration." + ::= { cienaCesCfmDelayMsgEntry 23 } + + -- + + -- Frame Loss Measurement Msg table + + -- + + cienaCesCfmFrameLossMsgTable OBJECT-TYPE + + SYNTAX SEQUENCE OF CienaCesCfmFrameLossMsgEntry + + MAX-ACCESS not-accessible + + STATUS current + + DESCRIPTION + + "The (conceptual) table listing the configuration + + parameters for the FrameLossMeasurementMsg." + + ::= { cienaCesCfmFrameLoss 1 } + + + + cienaCesCfmFrameLossMsgEntry OBJECT-TYPE + + SYNTAX CienaCesCfmFrameLossMsgEntry + + MAX-ACCESS not-accessible + + STATUS current + + DESCRIPTION + + "An entry (conceptual row) in the cienaCesCfmFrameLossMsgTable." + + + + INDEX {cienaCesCfmServiceIndex, cienaCesCfmFrameLossMsgLocalMEPId} + + ::= { cienaCesCfmFrameLossMsgTable 1 } + + + + CienaCesCfmFrameLossMsgEntry ::= SEQUENCE { + + cienaCesCfmFrameLossMsgLocalMEPId INTEGER, + + cienaCesCfmFrameLossMsgTargetMEPID Unsigned32, + + cienaCesCfmFrameLossMsgNearLossThreshold INTEGER, + + cienaCesCfmFrameLossMsgFarLossThreshold INTEGER, + + cienaCesCfmFrameLossMsgServiceName DisplayString, + + cienaCesCfmFrameLossMsgFrameLossNear Unsigned32, + + cienaCesCfmFrameLossMsgFrameLossFar Unsigned32 + + } + + cienaCesCfmFrameLossMsgLocalMEPId OBJECT-TYPE + + SYNTAX INTEGER (1..65535) + + MAX-ACCESS not-accessible + + STATUS current + + DESCRIPTION + + "This object is used to specify the local MEP ID at the source." + + ::= { cienaCesCfmFrameLossMsgEntry 1 } + + + + cienaCesCfmFrameLossMsgTargetMEPID OBJECT-TYPE + + SYNTAX Unsigned32 (1..8191) + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "This object is used to specify the MEP ID." + + ::= { cienaCesCfmFrameLossMsgEntry 2 } + + + + cienaCesCfmFrameLossMsgNearLossThreshold OBJECT-TYPE + + SYNTAX INTEGER (0..600) + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "Indicates the threshold value for the near-end frame loss." + + ::= { cienaCesCfmFrameLossMsgEntry 3 } + + + + cienaCesCfmFrameLossMsgFarLossThreshold OBJECT-TYPE + + SYNTAX INTEGER (0..600) + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "This object indicates the threshold value for the far-end frame loss." + + ::= { cienaCesCfmFrameLossMsgEntry 4 } + + + + cienaCesCfmFrameLossMsgServiceName OBJECT-TYPE + + SYNTAX DisplayString (SIZE(1..31)) + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "This object indicates the service associated with + + the frame loss measurement message (LMM)." + + ::= { cienaCesCfmFrameLossMsgEntry 5 } + + + + cienaCesCfmFrameLossMsgFrameLossNear OBJECT-TYPE + + SYNTAX Unsigned32 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "This object indicates the near-end frame loss. For a MEP, + + near-end frame loss refers to frame loss associated with the + + ingress data frames." + + ::= { cienaCesCfmFrameLossMsgEntry 6 } + + + +cienaCesCfmFrameLossMsgFrameLossFar OBJECT-TYPE + + SYNTAX Unsigned32 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "This object indicates the far-end frame loss. For a MEP, + + far-end frame loss refers to frame loss associated with the + + egress data frames." + + ::= { cienaCesCfmFrameLossMsgEntry 7 } + + + + + + -- + + -- CFM Service Fault Notification Attributes Table + + -- + + cienaCesCfmServiceFaultNotifTable OBJECT-TYPE + + SYNTAX SEQUENCE OF CienaCesCfmServiceFaultNotifEntry + + MAX-ACCESS not-accessible + + STATUS current + + DESCRIPTION + + "The (conceptual) table listing the configuration + + parameters for the CFM service table." + + ::= { cienaCesCfmServiceFaultNotifAttrs 1 } + + + + cienaCesCfmServiceFaultNotifEntry OBJECT-TYPE + + SYNTAX CienaCesCfmServiceFaultNotifEntry + + MAX-ACCESS not-accessible + + STATUS current + + DESCRIPTION + + "An entry (conceptual row) in the cienaCesCfmServiceFaultNotifTable." + + INDEX {cienaCesCfmServiceIndex} + + ::= { cienaCesCfmServiceFaultNotifTable 1 } + + + + CienaCesCfmServiceFaultNotifEntry ::= SEQUENCE { + + cienaCesCfmServiceFaultTime TimeTicks, + + cienaCesCfmServiceFaultType INTEGER, + + cienaCesCfmServiceFaultDesc DisplayString, + + cienaCesCfmServiceFaultMep INTEGER, + + cienaCesCfmServiceVsPbtName DisplayString + + } + + + + cienaCesCfmServiceFaultTime OBJECT-TYPE + + SYNTAX TimeTicks + + MAX-ACCESS accessible-for-notify + + STATUS current + + DESCRIPTION + + "This object indicates the time at which the fault occurred." + + ::= { cienaCesCfmServiceFaultNotifEntry 1 } + + + + cienaCesCfmServiceFaultType OBJECT-TYPE + + SYNTAX INTEGER { + + none(1), + + errorRDIDefect(2), + + errorMACStatusDefect(3), + + errorRMEPCCMDefect(4), + + errorCCMDefect(5), + + xconCCMDefect(6) + + } + + MAX-ACCESS accessible-for-notify + + STATUS current + + DESCRIPTION + + "This object indicates the type of fault." + + ::= { cienaCesCfmServiceFaultNotifEntry 2 } + + + +cienaCesCfmServiceFaultDesc OBJECT-TYPE + + SYNTAX DisplayString + + MAX-ACCESS accessible-for-notify + + STATUS current + + DESCRIPTION + + "This object indicates the description of the fault." + + ::= { cienaCesCfmServiceFaultNotifEntry 3 } + + + +cienaCesCfmServiceFaultMep OBJECT-TYPE + + SYNTAX INTEGER (1..8191) + + MAX-ACCESS accessible-for-notify + + STATUS current + + DESCRIPTION + + "This object indicates the MEP ID of the MEP reporting the fault." + + ::= { cienaCesCfmServiceFaultNotifEntry 4 } + + + + cienaCesCfmServiceVsPbtName OBJECT-TYPE + + SYNTAX DisplayString (SIZE(0..31)) + + MAX-ACCESS accessible-for-notify + + STATUS current + + DESCRIPTION + + "This object indicates the virtual switch or PBB-TE tunnel + + assigned to the given service." + + ::= { cienaCesCfmServiceFaultNotifEntry 5 } + + + + -- + + -- CFM Maintainence Domain Table + + -- + + cienaCesCfmMaintenanceDomainTable OBJECT-TYPE + + SYNTAX SEQUENCE OF CienaCesCfmMaintenanceDomainEntry + + MAX-ACCESS not-accessible + + STATUS current + + DESCRIPTION + + "The (conceptual) table listing the configuration + + parameters for the CFM maintenance domain table." + + ::= { cienaCesCfmMaintenance 1 } + + + + cienaCesCfmMaintenanceDomainEntry OBJECT-TYPE + + SYNTAX CienaCesCfmMaintenanceDomainEntry + + MAX-ACCESS not-accessible + + STATUS current + + DESCRIPTION + + "An entry (conceptual row) in the cienaCesCfmMaintenanceDomainTable." + + INDEX {cienaCesCfmMaintenanceDomainIndex } + + ::= { cienaCesCfmMaintenanceDomainTable 1 } + + + + CienaCesCfmMaintenanceDomainEntry ::= SEQUENCE { + + cienaCesCfmMaintenanceDomainIndex Unsigned32, + + cienaCesCfmMaintenanceDomainLevel INTEGER, + + cienaCesCfmMaintenanceDomainName DisplayString, + + cienaCesCfmMaintenanceDomainServiceCount Unsigned32 + + } + + + + cienaCesCfmMaintenanceDomainIndex OBJECT-TYPE + + SYNTAX Unsigned32 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "This object indicates the unique index in the table." + + ::= { cienaCesCfmMaintenanceDomainEntry 1 } + + + + cienaCesCfmMaintenanceDomainLevel OBJECT-TYPE + + SYNTAX INTEGER + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "This object indicates the maintenance domain level." + + ::= { cienaCesCfmMaintenanceDomainEntry 2 } + + + + cienaCesCfmMaintenanceDomainName OBJECT-TYPE + + SYNTAX DisplayString + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "This object indicates the maintenance domain name." + + ::= { cienaCesCfmMaintenanceDomainEntry 3 } + + + + cienaCesCfmMaintenanceDomainServiceCount OBJECT-TYPE + + SYNTAX Unsigned32 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "This object indicates the number of CFM services mapped to this maintenance domain." + + ::= { cienaCesCfmMaintenanceDomainEntry 4 } + + + + -- + + -- CFM Service Frame Budget Table + + -- + + cienaCesCfmServiceFrameBudgetTable OBJECT-TYPE + + SYNTAX SEQUENCE OF CienaCesCfmServiceFrameBudgetEntry + + MAX-ACCESS not-accessible + + STATUS current + + DESCRIPTION + + "The (conceptual) table listing the configuration + + parameters for the CFM service frame budget table." + + ::= { cienaCesCfmServiceFrameBudget 1 } + + + + cienaCesCfmServiceFrameBudgetEntry OBJECT-TYPE + + SYNTAX CienaCesCfmServiceFrameBudgetEntry + + MAX-ACCESS not-accessible + + STATUS current + + DESCRIPTION + + "An entry (conceptual row) in the cienaCesCfmServiceFrameBudgetTable." + + INDEX {cienaCesCfmServiceIndex, cienaCesCfmSlotIndex} + + ::= { cienaCesCfmServiceFrameBudgetTable 1 } + + + + CienaCesCfmServiceFrameBudgetEntry ::= SEQUENCE { + + + + cienaCesCfmSlotIndex INTEGER, + + cienaCesCfmServiceFrameBudgetSlot Counter32 + + } + + + + cienaCesCfmSlotIndex OBJECT-TYPE + + SYNTAX INTEGER(1..256) + + MAX-ACCESS not-accessible + + STATUS current + + DESCRIPTION + + "This object indicates the slot number." + + ::= { cienaCesCfmServiceFrameBudgetEntry 1 } + + + + cienaCesCfmServiceFrameBudgetSlot OBJECT-TYPE + + SYNTAX Counter32 + + UNITS "frames/sec" + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "This object indicates the CFM frame budget for the slot for the given service." + + ::= { cienaCesCfmServiceFrameBudgetEntry 2 } + + + + -- + + -- CFM Global Frame Budget Table + + -- + + + + cienaCesCfmGlobalControlModuleFrameBudget OBJECT-TYPE + + SYNTAX Counter32 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "Control Module Frame Budget." + + ::= { cienaCesCfmFrameBudgetGlobal 1} + + + + cienaCesCfmFrameBudgetGlobalTable OBJECT-TYPE + + SYNTAX SEQUENCE OF CienaCesCfmFrameBudgetGlobalEntry + + MAX-ACCESS not-accessible + + STATUS current + + DESCRIPTION + + "The (conceptual) table listing the configuration + + parameters for the CFM global frame budget table." + + ::= { cienaCesCfmFrameBudgetGlobal 2} + + + + cienaCesCfmFrameBudgetGlobalEntry OBJECT-TYPE + + SYNTAX CienaCesCfmFrameBudgetGlobalEntry + + MAX-ACCESS not-accessible + + STATUS current + + DESCRIPTION + + "An entry (conceptual row) in the cienaCesCfmGlobalFrameBudgetTable." + + INDEX {cienaCesCfmSlotIndex} + + ::= { cienaCesCfmFrameBudgetGlobalTable 1 } + + + + CienaCesCfmFrameBudgetGlobalEntry ::= SEQUENCE { + + + + cienaCesCfmFrameBudgetGlobalSlot Counter32 + + } + + + + cienaCesCfmFrameBudgetGlobalSlot OBJECT-TYPE + + SYNTAX Counter32 + + UNITS "frames/sec" + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "This object indicates the global CFM frame budget for the slot." + + ::= { cienaCesCfmFrameBudgetGlobalEntry 1 } + + + + + + -- + + --CFM STATISTICS + + -- + + cienaCesCfmGlobalStatsClear OBJECT-TYPE + + SYNTAX CienaStatsClear + + MAX-ACCESS read-write + + STATUS current + + DESCRIPTION + + "Setting this object clears CFM statistics globally." + + ::= {cienaCesCfmGlobalMIBObjects 1 } + + + + -- Global Frame Budget + + + + cienaCesCfmGlobalFrameBudgetControlModule OBJECT-TYPE + + SYNTAX Counter32 + + MAX-ACCESS read-only + + STATUS deprecated + + DESCRIPTION + + "Control Module Frame Budget is deprecated because it is moved from statistics to node definitions." + + ::= { cienaCesCfmGlobalFrameBudget 1} + + + + cienaCesCfmGlobalFrameBudgetSlot1 OBJECT-TYPE + + SYNTAX Counter32 + + MAX-ACCESS read-only + + STATUS deprecated + + DESCRIPTION + + "Slot1 Frame Budget." + + ::= { cienaCesCfmGlobalFrameBudget 2 } + + + + cienaCesCfmGlobalFrameBudgetSlot2 OBJECT-TYPE + + SYNTAX Counter32 + + MAX-ACCESS read-only + + STATUS deprecated + + DESCRIPTION + + "Slot2 Frame Budget." + + ::= { cienaCesCfmGlobalFrameBudget 3} + + + + cienaCesCfmGlobalFrameBudgetSlot3 OBJECT-TYPE + + SYNTAX Counter32 + + MAX-ACCESS read-only + + STATUS deprecated + + DESCRIPTION + + "Slot3 Frame Budget." + + ::= { cienaCesCfmGlobalFrameBudget 4 } + + + + cienaCesCfmGlobalFrameBudgetSlot4 OBJECT-TYPE + + SYNTAX Counter32 + + MAX-ACCESS read-only + + STATUS deprecated + + DESCRIPTION + + "Slot4 Frame Budget." + + ::= { cienaCesCfmGlobalFrameBudget 5 } + + + + cienaCesCfmGlobalFrameBudgetSlot5 OBJECT-TYPE + + SYNTAX Counter32 + + MAX-ACCESS read-only + + STATUS deprecated + + DESCRIPTION + + "Slot5 Frame Budget." + + ::= { cienaCesCfmGlobalFrameBudget 6 } + + + + cienaCesCfmGlobalFrameBudgetSlot6 OBJECT-TYPE + + SYNTAX Counter32 + + MAX-ACCESS read-only + + STATUS deprecated + + DESCRIPTION + + "Slot6 Frame Budget." + + ::= { cienaCesCfmGlobalFrameBudget 7 } + + + + cienaCesCfmGlobalFrameBudgetSlot7 OBJECT-TYPE + + SYNTAX Counter32 + + MAX-ACCESS read-only + + STATUS deprecated + + DESCRIPTION + + "Slot7 Frame Budget." + + ::= { cienaCesCfmGlobalFrameBudget 8 } + + + + cienaCesCfmGlobalFrameBudgetSlot8 OBJECT-TYPE + + SYNTAX Counter32 + + MAX-ACCESS read-only + + STATUS deprecated + + DESCRIPTION + + "Slot8 Frame Budget." + + ::= { cienaCesCfmGlobalFrameBudget 9 } + + + + cienaCesCfmGlobalFrameBudgetSlot9 OBJECT-TYPE + + SYNTAX Counter32 + + MAX-ACCESS read-only + + STATUS deprecated + + DESCRIPTION + + "Slot9 Frame Budget." + + ::= { cienaCesCfmGlobalFrameBudget 10 } + + + + cienaCesCfmGlobalFrameBudgetSlot10 OBJECT-TYPE + + SYNTAX Counter32 + + MAX-ACCESS read-only + + STATUS deprecated + + DESCRIPTION + + "Slot10 Frame Budget." + + ::= { cienaCesCfmGlobalFrameBudget 11 } + + + + + + -- Global CFM Statistics + + + + cienaCesCfmGlobalStatsTxTotalFrames OBJECT-TYPE + + SYNTAX Counter64 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "The number of CFM frames sent." + + ::= { cienaCesCfmGlobalStats 1 } + + + + cienaCesCfmGlobalStatsTxFloodedframes OBJECT-TYPE + + SYNTAX Counter64 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "The number of flooded frames sent." + + ::= { cienaCesCfmGlobalStats 2 } + + + + cienaCesCfmGlobalStatsTxFloodignoredInvalidLevel OBJECT-TYPE + + SYNTAX Counter64 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "This counter is incremented when the frame's destination MAC is not the expected multicast destination MAC for the frame's MD level." + + ::= { cienaCesCfmGlobalStats 3 } + + + + cienaCesCfmGlobalStatsTxFloodignoredHighLevelMepExist OBJECT-TYPE + + SYNTAX Counter64 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "This counter is incremented when there is a MEP at a higher MD level than the frame's MD level that blocks the frame from being flooded." + + ::= { cienaCesCfmGlobalStats 4 } + + + + cienaCesCfmGlobalStatsTxFloodignoredSTPState OBJECT-TYPE + + SYNTAX Counter64 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "This counter is incremented when the STP state of the ingress or egress port is something other than forwarding." + + ::= { cienaCesCfmGlobalStats 5 } + + + + cienaCesCfmGlobalStatsRxTotalFrames OBJECT-TYPE + + SYNTAX Counter64 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "The number of frames received." + + ::= { cienaCesCfmGlobalStats 6 } + + + + cienaCesCfmGlobalStatsRxDropInvalidEtype OBJECT-TYPE + + SYNTAX Counter64 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "The number of frames dropped when the mode is administratively disabled." + + ::= { cienaCesCfmGlobalStats 7 } + + + + cienaCesCfmGlobalStatsRxDropInvalidOpCode OBJECT-TYPE + + SYNTAX Counter64 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "The number of received invalid opcode frames dropped." + + ::= { cienaCesCfmGlobalStats 8 } + + + + cienaCesCfmGlobalStatsRxDropL2DAHeaderLevelMismatch OBJECT-TYPE + + SYNTAX Counter64 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "The number of frames dropped when the system is not in STP forwarding mode." + + ::= { cienaCesCfmGlobalStats 9 } + + cienaCesCfmGlobalStatsRxTotalMalformedFrames OBJECT-TYPE + + SYNTAX Counter64 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "The number of malformed CFM frames received." + + ::= { cienaCesCfmGlobalStats 10 } + + + + -- Global CCM Stats + + cienaCesCfmGlobalCCMStatsTxTotalCCM OBJECT-TYPE + + SYNTAX Counter64 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "The total number of CCM frames sent." + + ::= { cienaCesCfmGlobalCCMStats 1 } + + + + cienaCesCfmGlobalCCMStatsTxTotalCCMFlooded OBJECT-TYPE + + SYNTAX Counter64 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "The total number of flooded CCM frames sent." + + ::= { cienaCesCfmGlobalCCMStats 2 } + + + + cienaCesCfmGlobalCCMStatsRxTotalCCM OBJECT-TYPE + + SYNTAX Counter64 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "The number of valid frames received." + + ::= { cienaCesCfmGlobalCCMStats 3 } + + + + cienaCesCfmGlobalCCMStatsRxTotalCCMSequenceErrors OBJECT-TYPE + + SYNTAX Counter64 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "The number of errored CCM frames received in sequence." + + ::= { cienaCesCfmGlobalCCMStats 5 } + + + + cienaCesCfmGlobalCCMStatsRxInvalidMAID OBJECT-TYPE + + SYNTAX Counter64 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "The number of MD level CFM frames received." + + ::= { cienaCesCfmGlobalCCMStats 6 } + + + + cienaCesCfmGlobalCCMStatsRxInvalidCCMInterval OBJECT-TYPE + + SYNTAX Counter64 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "The number of MAID Xcon CFM frames received." + + ::= { cienaCesCfmGlobalCCMStats 7 } + + + + cienaCesCfmGlobalCCMStatsRxInvalidFirstTlvOffset OBJECT-TYPE + + SYNTAX Counter64 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "The number of frames dropped when the mode is administratively disabled." + + ::= { cienaCesCfmGlobalCCMStats 8 } + + + + cienaCesCfmGlobalCCMStatsRxInvalidPortStatusTlv OBJECT-TYPE + + SYNTAX Counter64 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "The number of CCM frames received with invalid port status TLV." + + ::= { cienaCesCfmGlobalCCMStats 9 } + + + + cienaCesCfmGlobalCCMStatsRxInvalidInterfaceStatusTlv OBJECT-TYPE + + SYNTAX Counter64 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "The number of invalid CCM frames received with invalid interface status TLV." + + ::= { cienaCesCfmGlobalCCMStats 11 } + + + + cienaCesCfmGlobalCCMStatsRxInvalidLogicalInterface OBJECT-TYPE + + SYNTAX Counter64 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "The number of invalid CCM frames received with invalid logical interface status TLV." + + ::= { cienaCesCfmGlobalCCMStats 12 } + + + + cienaCesCfmGlobalCCMStatsRxInvalidServiceInstance OBJECT-TYPE + + SYNTAX Counter64 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "The number of invalid CCM frames received on invalid service instance." + + ::= { cienaCesCfmGlobalCCMStats 13 } + + + +cienaCesCfmGlobalCCMStatsRxInvalidPBTEncapTunnel OBJECT-TYPE + + SYNTAX Counter64 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "The number of invalid CCM frames received on invalid PBB-TE encapsulation tunnel." + + ::= { cienaCesCfmGlobalCCMStats 14 } + + + +cienaCesCfmGlobalCCMStatsRxDropAdminDisable OBJECT-TYPE + + SYNTAX Counter64 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "The number of CCM frames dropped because of a disabled administrative state." + + ::= { cienaCesCfmGlobalCCMStats 15 } + + + + cienaCesCfmGlobalCCMStatsRxDropSTPstatenotForwarding OBJECT-TYPE + + SYNTAX Counter64 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "The number of CCM frames dropped because STP state was not forwarding." + + ::= { cienaCesCfmGlobalCCMStats 16 } + + + +cienaCesCfmGlobalCCMStatsRxDropCCMBlockedbyOppMep OBJECT-TYPE + + SYNTAX Counter64 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "The number of invalid CCM frames dropped because CCM was blocked by opposite MEP." + + ::= { cienaCesCfmGlobalCCMStats 17 } + + + +cienaCesCfmGlobalCCMStatsRxDropCCMLeakage OBJECT-TYPE + + SYNTAX Counter64 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "The number of CCM frames dropped because of CCM leakage." + + ::= { cienaCesCfmGlobalCCMStats 18 } + + + +cienaCesCfmGlobalCCMStatsRxDropCCMTooLong OBJECT-TYPE + + SYNTAX Counter64 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "The number of invalid CCM received frames dropped because CCM was too long." + + ::= { cienaCesCfmGlobalCCMStats 19 } + + + +cienaCesCfmGlobalCCMStatsRxDropCCMServiceDisabled OBJECT-TYPE + + SYNTAX Counter64 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "The number of CCM frames received and dropped because the service was disabled." + + ::= { cienaCesCfmGlobalCCMStats 20 } + + +cienaCesCfmGlobalCCMStatsRxTotalErrorCCM OBJECT-TYPE + + SYNTAX Counter64 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "The number of CCM frames received with Error CCM fault." + + ::= { cienaCesCfmGlobalCCMStats 21 } + + +cienaCesCfmGlobalCCMStatsRxTotalMalformedCCM OBJECT-TYPE + + SYNTAX Counter64 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "The number of malformed CCM frames received." + + ::= { cienaCesCfmGlobalCCMStats 22 } + + +cienaCesCfmGlobalCCMStatsRxTotalMEPCCM OBJECT-TYPE + + SYNTAX Counter64 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "The number of CCM frames received by CFM MEPs." + + ::= { cienaCesCfmGlobalCCMStats 23 } + +cienaCesCfmGlobalCCMStatsRxTotalMIPCCM OBJECT-TYPE + + SYNTAX Counter64 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "The number of CCM frames received by CFM MIPs." + + ::= { cienaCesCfmGlobalCCMStats 24 } + + +-- Global Loopback Statististics + + + + cienaCesCfmGlobalLoopbackStatsTxTotalLBM OBJECT-TYPE + + SYNTAX Counter64 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "The number of loopback message frames sent." + + ::= { cienaCesCfmGlobalLoopbackStats 1 } + + + + cienaCesCfmGlobalLoopbackStatsTxTotalLBR OBJECT-TYPE + + SYNTAX Counter64 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "The total number of loopback reply frames sent." + + ::= { cienaCesCfmGlobalLoopbackStats 2 } + + + + cienaCesCfmGlobalLoopbackStatsRxTotalLBM OBJECT-TYPE + + SYNTAX Counter64 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "The total number of loopback message frames received." + + ::= { cienaCesCfmGlobalLoopbackStats 3 } + + + + + + cienaCesCfmGlobalLoopbackStatsRxTotalLBR OBJECT-TYPE + + SYNTAX Counter64 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "The total number of loopback reply frames received." + + ::= { cienaCesCfmGlobalLoopbackStats 4 } + + + + + + cienaCesCfmGlobalLoopbackStatsRxTotalInOrderLBR OBJECT-TYPE + + SYNTAX Counter64 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "The total number of in order loopback reply frames received." + + ::= { cienaCesCfmGlobalLoopbackStats 5 } + + + + + + cienaCesCfmGlobalLoopbackStatsRxTotalOutOfOrderLBR OBJECT-TYPE + + SYNTAX Counter64 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "The total number of out of order loopback reply frames received." + + ::= { cienaCesCfmGlobalLoopbackStats 6 } + + + + + + cienaCesCfmGlobalLoopbackStatsRxTotalContentMismatchLBR OBJECT-TYPE + + SYNTAX Counter64 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "The total number of content mismatch loopback reply frames sent." + + ::= { cienaCesCfmGlobalLoopbackStats 7 } + + + + + + cienaCesCfmGlobalLoopbackStatsRxTotalUnexpectedLBR OBJECT-TYPE + + SYNTAX Counter64 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "The total number of unexpected loopback reply frames received." + + ::= { cienaCesCfmGlobalLoopbackStats 8 } + + + + + + cienaCesCfmGlobalLoopbackStatsRxLBMInvalidFirstTLVOffset OBJECT-TYPE + + SYNTAX Counter64 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "The total number of loopback message frames received with invalid TLV offset." + + ::= { cienaCesCfmGlobalLoopbackStats 9 } + + + + + + cienaCesCfmGlobalLoopbackStatsRxLBRInvalidFirstTLVOffset OBJECT-TYPE + + SYNTAX Counter64 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "The total number of loopback reply frames received with invalid first TLV offset." + + ::= { cienaCesCfmGlobalLoopbackStats 10 } + + + + + + cienaCesCfmGlobalLoopbackStatsRxUnresolvedLBM OBJECT-TYPE + + SYNTAX Counter64 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "The total number of unresolved loopback message frames received." + + ::= { cienaCesCfmGlobalLoopbackStats 11 } + + + + + + cienaCesCfmGlobalLoopbackStatsRxUnresolvedLBR OBJECT-TYPE + + SYNTAX Counter64 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "The total number of unresolved loopback reply frames received." + + ::= { cienaCesCfmGlobalLoopbackStats 12 } + + + cienaCesCfmGlobalLoopbackStatsRxTotalMalformedLBM OBJECT-TYPE + + SYNTAX Counter64 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "The total number of malformed loopback messages received." + + ::= { cienaCesCfmGlobalLoopbackStats 13 } + + + + + + -- Global LinkTrace Statistics + + cienaCesCfmGlobalLinkTraceStatsTxTotalLTM OBJECT-TYPE + + SYNTAX Counter64 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "The number of linktrace messages transmitted." + + ::= { cienaCesCfmGlobalLinkTraceStats 1 } + + + + cienaCesCfmGlobalLinkTraceStatsTxTotalLTR OBJECT-TYPE + + SYNTAX Counter64 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "The number of linktrace replies transmitted." + + ::= { cienaCesCfmGlobalLinkTraceStats 2 } + + + + cienaCesCfmGlobalLinkTraceStatsRxTotalLTM OBJECT-TYPE + + SYNTAX Counter64 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "The number of linktrace messages received." + + ::= { cienaCesCfmGlobalLinkTraceStats 3 } + + + + cienaCesCfmGlobalLinkTraceStatsRxTotalLTR OBJECT-TYPE + + SYNTAX Counter64 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "The number of linktrace replies received." + + ::= { cienaCesCfmGlobalLinkTraceStats 4 } + + + + cienaCesCfmGlobalLinkTraceStatsRxTotalUnexpectedLTR OBJECT-TYPE + + SYNTAX Counter64 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "The number of unexpected linktrace replies received." + + ::= { cienaCesCfmGlobalLinkTraceStats 5 } + + + + cienaCesCfmGlobalLinkTraceStatsRxLTMInvalidFirstTLVOffset OBJECT-TYPE + + SYNTAX Counter64 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "The number of linktrace messages received with an invalid first TLV offset." + + ::= { cienaCesCfmGlobalLinkTraceStats 6 } + + + + cienaCesCfmGlobalLinkTraceStatsRxLTRInvalidFirstTLVOffset OBJECT-TYPE + + SYNTAX Counter64 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "The number of linktrace replies received with an invalid first TLV offset." + + ::= { cienaCesCfmGlobalLinkTraceStats 7 } + + + + cienaCesCfmGlobalLinkTraceStatsRxLTRInvalidRelayAction OBJECT-TYPE + + SYNTAX Counter64 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "The number of linktrace replies received with an invalid relay action." + + ::= { cienaCesCfmGlobalLinkTraceStats 8 } + + + + cienaCesCfmGlobalLinkTraceStatsRxUnresolvedLTM OBJECT-TYPE + + SYNTAX Counter64 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "The number of linktrace messages received that could not be resolved." + + ::= { cienaCesCfmGlobalLinkTraceStats 9 } + + + + cienaCesCfmGlobalLinkTraceStatsRxUnresolvedLTR OBJECT-TYPE + + SYNTAX Counter64 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "The number of linktrace replies received that could not be resolved." + + ::= { cienaCesCfmGlobalLinkTraceStats 10 } + + + + + +--Global Delay Measurement Statistics + + cienaCesCfmGlobalDelayMeasurementStatsTxTotalDMM OBJECT-TYPE + + SYNTAX Counter64 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "The number of DMM frames transmitted." + + ::= { cienaCesCfmGlobalDelayMeasurementStats 1 } + + + + cienaCesCfmGlobalDelayMeasurementStatsTxTotalDMR OBJECT-TYPE + + SYNTAX Counter64 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "The number of DMR frames transmitted." + + ::= { cienaCesCfmGlobalDelayMeasurementStats 2 } + + + + cienaCesCfmGlobalDelayMeasurementStatsRxTotalDMM OBJECT-TYPE + + SYNTAX Counter64 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "The number of DMM frames received." + + ::= { cienaCesCfmGlobalDelayMeasurementStats 3 } + + + + cienaCesCfmGlobalDelayMeasurementStatsRxTotalDMR OBJECT-TYPE + + SYNTAX Counter64 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "The number of DMR frames received." + + ::= { cienaCesCfmGlobalDelayMeasurementStats 4 } + + + + + +--Global Loss Measurement Statistics + + + + cienaCesCfmGlobalLossMeasurementStatsTxTotalLMM OBJECT-TYPE + + SYNTAX Counter64 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "The number of LMM frames transmitted." + + ::= { cienaCesCfmGlobalLossMeasurementStats 1 } + + + + cienaCesCfmGlobalLossMeasurementStatsTxTotalLMR OBJECT-TYPE + + SYNTAX Counter64 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "The number of LMR frames transmitted." + + ::= { cienaCesCfmGlobalLossMeasurementStats 2 } + + + + cienaCesCfmGlobalLossMeasurementStatsRxTotalLMM OBJECT-TYPE + + SYNTAX Counter64 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "The number of LMM frames received." + + ::= { cienaCesCfmGlobalLossMeasurementStats 3 } + + + + cienaCesCfmGlobalLossMeasurementStatsRxTotalLMR OBJECT-TYPE + + SYNTAX Counter64 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "The number of LMR frames received." + + ::= { cienaCesCfmGlobalLossMeasurementStats 4 } + + +-- +-- cienaCesCfmGlobalSyntheticLossMeasurementStats +-- + cienaCesCfmGlobalSyntheticLossMeasurementStatsTxTotalSLM OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of synthetic loss messages transmitted." + ::= {cienaCesCfmGlobalSyntheticLossMeasurementStats 1 } + + cienaCesCfmGlobalSyntheticLossMeasurementStatsTxTotalSLR OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of synthetic loss replies transmitted." + ::= {cienaCesCfmGlobalSyntheticLossMeasurementStats 2 } + + cienaCesCfmGlobalSyntheticLossMeasurementStatsRxTotalSLM OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of synthetic loss messages received." + ::= { cienaCesCfmGlobalSyntheticLossMeasurementStats 3 } + + cienaCesCfmGlobalSyntheticLossMeasurementStatsRxTotalSLR OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of synthetic loss replies received." + ::= { cienaCesCfmGlobalSyntheticLossMeasurementStats 4 } + + cienaCesCfmGlobalSyntheticLossMeasurementStatsRxTotalValidSLM OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of valid synthetic loss messages received." + ::= {cienaCesCfmGlobalSyntheticLossMeasurementStats 5 } + + cienaCesCfmGlobalSyntheticLossMeasurementStatsRxTotalValidSLR OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of valid synthetic loss replies received." + ::= {cienaCesCfmGlobalSyntheticLossMeasurementStats 6 } + + cienaCesCfmGlobalSyntheticLossMeasurementStatsRxTotalInvalidSLM OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of invalid synthetic loss messages received." + ::= { cienaCesCfmGlobalSyntheticLossMeasurementStats 7 } + + cienaCesCfmGlobalSyntheticLossMeasurementStatsRxTotalInvalidSLR OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of invalid synthetic loss replies received." + ::= { cienaCesCfmGlobalSyntheticLossMeasurementStats 8 } + + cienaCesCfmGlobalSyntheticLossMeasurementStatsRxDropSLM OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of synthetic loss messages dropped due to lack of responder resources." + ::= { cienaCesCfmGlobalSyntheticLossMeasurementStats 9 } + +-- CFM Service Statistics + + + + cienaCesCfmServiceStatsTable OBJECT-TYPE + + SYNTAX SEQUENCE OF CienaCesCfmServiceStatsEntry + + MAX-ACCESS not-accessible + + STATUS current + + DESCRIPTION + + "The (conceptual) table listing the statistics + + for a given CFM service." + + ::= { cienaCesCfmServiceStats 1 } + + + + + + cienaCesCfmServiceStatsEntry OBJECT-TYPE + + SYNTAX CienaCesCfmServiceStatsEntry + + MAX-ACCESS not-accessible + + STATUS current + + DESCRIPTION + + "An entry (conceptual row) in the CienaCesCfmServiceTable." + + INDEX {cienaCesCfmServiceIndex} + + ::= { cienaCesCfmServiceStatsTable 1 } + + + + CienaCesCfmServiceStatsEntry ::= SEQUENCE { + + cienaCesCfmServiceStatsTotalTx Counter64, + + cienaCesCfmServiceStatsTotalRx Counter64, + + cienaCesCfmServiceStatsTotalTxLTM Counter64, + + cienaCesCfmServiceStatsTotalTxLTR Counter64, + + cienaCesCfmServiceStatsTotalRxLTM Counter64, + + cienaCesCfmServiceStatsTotalRxLTR Counter64, + + cienaCesCfmServiceStatsTotalRxUnexpectedLTR Counter64, + + cienaCesCfmServiceStatsTotalTxLBM Counter64, + + cienaCesCfmServiceStatsTotalTxLBR Counter64, + + cienaCesCfmServiceStatsTotalRxLBM Counter64, + + cienaCesCfmServiceStatsTotalRxInorderLBR Counter64, + + cienaCesCfmServiceStatsTotalRxOutOforderLBR Counter64, + + cienaCesCfmServiceStatsTotalRxContentMismatchLBR Counter64, + + cienaCesCfmServiceStatsTotalRxUnexpectedLBR Counter64, + + cienaCesCfmServiceStatsClear CienaStatsClear + + } + + + + cienaCesCfmServiceStatsTotalTx OBJECT-TYPE + + SYNTAX Counter64 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "The total CFM frames sent for the service." + + ::= { cienaCesCfmServiceStatsEntry 1 } + + + + cienaCesCfmServiceStatsTotalRx OBJECT-TYPE + + SYNTAX Counter64 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "The total CFM frames received for the service." + + ::= { cienaCesCfmServiceStatsEntry 2 } + + + + + + cienaCesCfmServiceStatsTotalTxLTM OBJECT-TYPE + + SYNTAX Counter64 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "The total number of linktrace messages transmitted for the CFM service." + + ::= { cienaCesCfmServiceStatsEntry 3 } + + + + + + cienaCesCfmServiceStatsTotalTxLTR OBJECT-TYPE + + SYNTAX Counter64 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "The total number of linktrace replies transmitted for the CFM service." + + ::= { cienaCesCfmServiceStatsEntry 4 } + + + + cienaCesCfmServiceStatsTotalRxLTM OBJECT-TYPE + + SYNTAX Counter64 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "The total number of link trace messages received for the CFM service." + + ::= { cienaCesCfmServiceStatsEntry 5 } + + + + + + cienaCesCfmServiceStatsTotalRxLTR OBJECT-TYPE + + SYNTAX Counter64 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "The total number of linktrace replies received for the CFM service." + + ::= { cienaCesCfmServiceStatsEntry 6 } + + + + + + cienaCesCfmServiceStatsTotalRxUnexpectedLTR OBJECT-TYPE + + SYNTAX Counter64 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "The total number of unexpected linktrace replies received for the CFM service." + + ::= { cienaCesCfmServiceStatsEntry 7 } + + + + + + cienaCesCfmServiceStatsTotalTxLBM OBJECT-TYPE + + SYNTAX Counter64 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "The total number of loopback messages transmitted for the CFM service." + + ::= { cienaCesCfmServiceStatsEntry 8 } + + + + + + cienaCesCfmServiceStatsTotalTxLBR OBJECT-TYPE + + SYNTAX Counter64 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "The total number of loopback replies transmitted for the CFM service." + + ::= { cienaCesCfmServiceStatsEntry 9 } + + + + + + cienaCesCfmServiceStatsTotalRxLBM OBJECT-TYPE + + SYNTAX Counter64 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "The total number of loopback messages received for the CFM service." + + ::= { cienaCesCfmServiceStatsEntry 10 } + + + + + + cienaCesCfmServiceStatsTotalRxInorderLBR OBJECT-TYPE + + SYNTAX Counter64 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "The total number of in-order loopback replies received." + + ::= { cienaCesCfmServiceStatsEntry 11 } + + + + + + cienaCesCfmServiceStatsTotalRxOutOforderLBR OBJECT-TYPE + + SYNTAX Counter64 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "The total number of out-of-order loopback replies received." + + ::= { cienaCesCfmServiceStatsEntry 12 } + + + + + + cienaCesCfmServiceStatsTotalRxContentMismatchLBR OBJECT-TYPE + + SYNTAX Counter64 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "The total number of content mismatched loopback replies received." + + ::= { cienaCesCfmServiceStatsEntry 13 } + + + + + + cienaCesCfmServiceStatsTotalRxUnexpectedLBR OBJECT-TYPE + + SYNTAX Counter64 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "The total number of unexpectecd loopback replies received." + + ::= { cienaCesCfmServiceStatsEntry 14 } + + + + cienaCesCfmServiceStatsClear OBJECT-TYPE + + SYNTAX CienaStatsClear + + MAX-ACCESS read-write + + STATUS current + + DESCRIPTION + + "To clear statistics for a given service, set this object to clear(1). During GET this object returns none(0)" + + + + ::= { cienaCesCfmServiceStatsEntry 15 } + + + +-- CFM Mep Statistics + + cienaCesCfmMepStatsTable OBJECT-TYPE + + SYNTAX SEQUENCE OF CienaCesCfmMepStatsEntry + + MAX-ACCESS not-accessible + + STATUS current + + DESCRIPTION + + "The (conceptual) table listing the configuration + + parameters for the CFM MEP table." + + ::= { cienaCesCfmMepStats 1 } + + + + cienaCesCfmMepStatsEntry OBJECT-TYPE + + SYNTAX CienaCesCfmMepStatsEntry + + MAX-ACCESS not-accessible + + STATUS current + + DESCRIPTION + + "An entry (conceptual row) in the cienaCesCfmMepStatsTable." + + INDEX {cienaCesCfmServiceIndex, cienaCesCfmMEPId} + + ::= { cienaCesCfmMepStatsTable 1 } + + + + CienaCesCfmMepStatsEntry ::= SEQUENCE { + + cienaCesCfmMepInterfaceType CienaCesCfmInterfaceType, + + cienaCesCfmMepInterfaceIndex Unsigned32, + + cienaCesCfmMepStatsTxTotalCCM Counter64, + + cienaCesCfmMepStatsRxTotalCCM Counter64, + + cienaCesCfmMepStatsTxLoopbackMessages Counter64, + + cienaCesCfmMepStatsTxLoopbackReply Counter64, + + cienaCesCfmMepStatsRxLoopbackMessages Counter64, + + cienaCesCfmMepStatsRxInorderLoopbackReply Counter64, + + cienaCesCfmMepStatsRxOutoforderLoopbackReply Counter64, + + cienaCesCfmMepStatsRxContentMismatchLoopbackReply Counter64, + + cienaCesCfmMepStatsRxUnexpectedLoopbackReply Counter64, + + cienaCesCfmMepStatsTxLinktraceMessage Counter64, + + cienaCesCfmMepStatsTxLinktraceReply Counter64, + + cienaCesCfmMepStatsRxLinktraceMessage Counter64, + + cienaCesCfmMepStatsRxLinktraceReply Counter64, + + cienaCesCfmMepStatsRxUnexpectedLinktraceReply Counter64, + + cienaCesCfmMepStatsTxDelayMeasurementMessage Counter64, + + cienaCesCfmMepStatsTxDelayMeasurementReply Counter64, + + cienaCesCfmMepStatsRxDelayMeasurementMessage Counter64, + + cienaCesCfmMepStatsRxDelayMeasurementReply Counter64, + + cienaCesCfmMepStatsTxLossMeasurementMessage Counter64, + + cienaCesCfmMepStatsTxLossMeasurementReply Counter64, + + cienaCesCfmMepStatsRxLossMeasurementMessage Counter64, + + cienaCesCfmMepStatsRxLossMeasurementReply Counter64, + + cienaCesCfmMepStatsLastLBMTargetRemoteMepId Unsigned32, + + cienaCesCfmMepStatsLastLBMTargetMacAddress CienaMacAddress, + + cienaCesCfmMepStatsLastLBMPriority Unsigned32, + + cienaCesCfmMepStatsLastLBMCount Unsigned32, + + cienaCesCfmMepStatsLastLBMFirstSeqNum Unsigned32, + + cienaCesCfmMepStatsLastLTMTargetRemoteMepId Unsigned32, + + cienaCesCfmMepStatsLastLTMTargetMacAddress CienaMacAddress, + + cienaCesCfmMepStatsLastLTMPriority Unsigned32, + + cienaCesCfmMepStatsLastLTMSeqNum Unsigned32, + + cienaCesCfmMepStatsLastLTMInitialTTL Unsigned32, + + cienaCesCfmMepStatsLastDMMTargetRemoteMepId Unsigned32, + + cienaCesCfmMepStatsLastDMMTargetMacAddress CienaMacAddress, + + cienaCesCfmMepStatsLastDMMPriority Unsigned32, + + cienaCesCfmMepStatsLastDMMRepeatInterval Unsigned32, + + cienaCesCfmMepStatsLastDMMNumOfDmmToSend Unsigned32, + + cienaCesCfmMepStatsLastLMMTargetRemoteMepId Unsigned32, + + cienaCesCfmMepStatsLastLMMTargetMacAddress CienaMacAddress, + + cienaCesCfmMepStatsLastLMMPriority Unsigned32, + + cienaCesCfmMepStatsLastLMMRepeatInterval Unsigned32, + + cienaCesCfmMepStatsLastLMMNumOfLmmToSend Unsigned32, + + cienaCesCfmMepStatsNextLBMSeqNumber Counter32, + + cienaCesCfmMepStatsNextLTMSeqNumber Counter32, + + cienaCesCfmMepStatsTxSyntheticLossMeasurementMessage Counter64, + + cienaCesCfmMepStatsTxSyntheticLossMeasurementReply Counter64, + + cienaCesCfmMepStatsRxSyntheticLossMeasurementMessage Counter64, + + cienaCesCfmMepStatsRxSyntheticLossMeasurementReply Counter64, + + cienaCesCfmMepStatsRxValidSyntheticLossMeasurementMessage Counter64, + + cienaCesCfmMepStatsRxValidSyntheticLossMeasurementReply Counter64, + + cienaCesCfmMepStatsRxInvalidSyntheticLossMeasurementMessage Counter64, + + cienaCesCfmMepStatsRxInvalidSyntheticLossMeasurementReply Counter64, + + cienaCesCfmMepStatsRxCCMWithErrorCCMFault Counter64, + + cienaCesCfmMepStatsRxCCMWithXCONFault Counter64, + + cienaCesCfmMepStatsRxCCMWithRMEPLOCFault Counter64, + + cienaCesCfmMepStatsRxCCMWithRDI0 Counter64, + + cienaCesCfmMepStatsRxCCMWithRDI1 Counter64, + + cienaCesCfmMepStatsRxCCMWithSequenceNumberMismatch Counter64, + + cienaCesCfmMepStatsRxCCMDroppedWithMalformedTlv Counter64, + + cienaCesCfmMepStatsToTxLoopbackMessages Counter64 + } + + + + cienaCesCfmMepInterfaceType OBJECT-TYPE + + SYNTAX CienaCesCfmInterfaceType + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "This object is used as the index in the table and indicates + + the MEP interface for the given service." + + ::= { cienaCesCfmMepStatsEntry 1 } + + + + cienaCesCfmMepInterfaceIndex OBJECT-TYPE + + SYNTAX Unsigned32 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "This object is used as the index in the table and indicates + + the MEP interface index for the given service." + + ::= { cienaCesCfmMepStatsEntry 2 } + + + + cienaCesCfmMepStatsTxTotalCCM OBJECT-TYPE + + SYNTAX Counter64 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "The total number of CCM messages transmitted by the CFM MEP." + + ::= { cienaCesCfmMepStatsEntry 3 } + + + + cienaCesCfmMepStatsRxTotalCCM OBJECT-TYPE + + SYNTAX Counter64 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "The total number of CCM messages received by the CFM MEP." + + ::= { cienaCesCfmMepStatsEntry 4 } + + + + cienaCesCfmMepStatsTxLoopbackMessages OBJECT-TYPE + + SYNTAX Counter64 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "The total number of loopback messages transmitted by the CFM MEP." + + ::= { cienaCesCfmMepStatsEntry 5 } + + + + cienaCesCfmMepStatsTxLoopbackReply OBJECT-TYPE + + SYNTAX Counter64 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "The total number of loopback replies transmitted by the CFM MEP." + + ::= { cienaCesCfmMepStatsEntry 6 } + + + + cienaCesCfmMepStatsRxLoopbackMessages OBJECT-TYPE + + SYNTAX Counter64 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "The total number of loopback messages received by the CFM MEP." + + ::= { cienaCesCfmMepStatsEntry 7 } + + + + cienaCesCfmMepStatsRxInorderLoopbackReply OBJECT-TYPE + + SYNTAX Counter64 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "The total number of in-order loopback replies received by the CFM MEP." + + ::= { cienaCesCfmMepStatsEntry 8 } + + + + cienaCesCfmMepStatsRxOutoforderLoopbackReply OBJECT-TYPE + + SYNTAX Counter64 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "The total number of out-of-order loopback replies received by the CFM MEP." + + ::= { cienaCesCfmMepStatsEntry 9 } + + + + cienaCesCfmMepStatsRxContentMismatchLoopbackReply OBJECT-TYPE + + SYNTAX Counter64 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "The total number of content mismatched loopback replies received by the CFM MEP." + + ::= { cienaCesCfmMepStatsEntry 10 } + + + + cienaCesCfmMepStatsRxUnexpectedLoopbackReply OBJECT-TYPE + + SYNTAX Counter64 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "The total number of unexpected loopback replies received by the CFM MEP." + + ::= { cienaCesCfmMepStatsEntry 11 } + + + + cienaCesCfmMepStatsTxLinktraceMessage OBJECT-TYPE + + SYNTAX Counter64 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "The total number of linktrace messages transmitted by the CFM MEP." + + ::= { cienaCesCfmMepStatsEntry 12 } + + + + cienaCesCfmMepStatsTxLinktraceReply OBJECT-TYPE + + SYNTAX Counter64 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "The total number of linktrace replies transmitted by the CFM MEP." + + ::= { cienaCesCfmMepStatsEntry 13 } + + + + cienaCesCfmMepStatsRxLinktraceMessage OBJECT-TYPE + + SYNTAX Counter64 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "The total number of linktrace messages received by the CFM MEP." + + ::= { cienaCesCfmMepStatsEntry 14 } + + + + cienaCesCfmMepStatsRxLinktraceReply OBJECT-TYPE + + SYNTAX Counter64 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "The total number of linktrace replies received by the CFM MEP." + + ::= { cienaCesCfmMepStatsEntry 15 } + + + + cienaCesCfmMepStatsRxUnexpectedLinktraceReply OBJECT-TYPE + + SYNTAX Counter64 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "The total number of unexpected linktrace replies received by the CFM MEP." + + ::= { cienaCesCfmMepStatsEntry 16 } + + + + cienaCesCfmMepStatsTxDelayMeasurementMessage OBJECT-TYPE + + SYNTAX Counter64 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "The total number of DMM messages transmitted by the CFM MEP." + + ::= { cienaCesCfmMepStatsEntry 17 } + + + + cienaCesCfmMepStatsTxDelayMeasurementReply OBJECT-TYPE + + SYNTAX Counter64 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "The total number of DMM replies transmitted by the CFM MEP." + + ::= { cienaCesCfmMepStatsEntry 18 } + + + + cienaCesCfmMepStatsRxDelayMeasurementMessage OBJECT-TYPE + + SYNTAX Counter64 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "The total number of DMM messages received by the CFM MEP." + + ::= { cienaCesCfmMepStatsEntry 19 } + + + + cienaCesCfmMepStatsRxDelayMeasurementReply OBJECT-TYPE + + SYNTAX Counter64 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "The total number of DMM replies received by the CFM MEP." + + ::= { cienaCesCfmMepStatsEntry 20 } + + + + cienaCesCfmMepStatsTxLossMeasurementMessage OBJECT-TYPE + + SYNTAX Counter64 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "The total number of LMM messages transmitted by the CFM MEP." + + ::= { cienaCesCfmMepStatsEntry 21 } + + + + cienaCesCfmMepStatsTxLossMeasurementReply OBJECT-TYPE + + SYNTAX Counter64 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "The total number of LMM replies transmitted by the CFM MEP." + + ::= { cienaCesCfmMepStatsEntry 22 } + + + + cienaCesCfmMepStatsRxLossMeasurementMessage OBJECT-TYPE + + SYNTAX Counter64 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "The total number of LMM messages received by the CFM MEP." + + ::= { cienaCesCfmMepStatsEntry 23 } + + + + cienaCesCfmMepStatsRxLossMeasurementReply OBJECT-TYPE + + SYNTAX Counter64 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "The total number of LMM replies received by the CFM MEP." + + ::= { cienaCesCfmMepStatsEntry 24 } + + + + cienaCesCfmMepStatsLastLBMTargetRemoteMepId OBJECT-TYPE + + SYNTAX Unsigned32 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "This object indicates the remote MEP ID of the last loopback message." + + ::= { cienaCesCfmMepStatsEntry 25 } + + + + cienaCesCfmMepStatsLastLBMTargetMacAddress OBJECT-TYPE + + SYNTAX CienaMacAddress + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "This object indicates the target MAC address for the last loopback message." + + ::= { cienaCesCfmMepStatsEntry 26 } + + + + cienaCesCfmMepStatsLastLBMPriority OBJECT-TYPE + + SYNTAX Unsigned32 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "This object indicates the last loopback message priority." + + ::= { cienaCesCfmMepStatsEntry 27 } + + + + cienaCesCfmMepStatsLastLBMCount OBJECT-TYPE + + SYNTAX Unsigned32 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "This object indicates the last loopback message count." + + ::= { cienaCesCfmMepStatsEntry 28 } + + + + cienaCesCfmMepStatsLastLBMFirstSeqNum OBJECT-TYPE + + SYNTAX Unsigned32 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "This object indicates the last loopback message first sequence number." + + ::= { cienaCesCfmMepStatsEntry 29 } + + + + cienaCesCfmMepStatsLastLTMTargetRemoteMepId OBJECT-TYPE + + SYNTAX Unsigned32 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "This object indicates the last linktrace message target remote MEP ID." + + ::= { cienaCesCfmMepStatsEntry 30 } + + + + cienaCesCfmMepStatsLastLTMTargetMacAddress OBJECT-TYPE + + SYNTAX CienaMacAddress + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "This object indicates the target MAC address of the the last linktrace message. " + + ::= { cienaCesCfmMepStatsEntry 31 } + + + + cienaCesCfmMepStatsLastLTMPriority OBJECT-TYPE + + SYNTAX Unsigned32 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "This object indicates the last linktrace message priority of the CFM MEP." + + ::= { cienaCesCfmMepStatsEntry 32 } + + + + cienaCesCfmMepStatsLastLTMSeqNum OBJECT-TYPE + + SYNTAX Unsigned32 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "This object indicates the last linktrace message sequence number of the CFM MEP." + + ::= { cienaCesCfmMepStatsEntry 33 } + + + + cienaCesCfmMepStatsLastLTMInitialTTL OBJECT-TYPE + + SYNTAX Unsigned32 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "This object indicates the last linktrace message initial TTL of the CFM MEP." + + ::= { cienaCesCfmMepStatsEntry 34 } + + + + cienaCesCfmMepStatsLastDMMTargetRemoteMepId OBJECT-TYPE + + SYNTAX Unsigned32 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "This object indicates the last DMM target remote MEP ID for the CFM MEP." + + ::= { cienaCesCfmMepStatsEntry 35 } + + + + cienaCesCfmMepStatsLastDMMTargetMacAddress OBJECT-TYPE + + SYNTAX CienaMacAddress + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "This object indicates the last DMM target MAC address for the CFM MEP." + + ::= { cienaCesCfmMepStatsEntry 36 } + + + + cienaCesCfmMepStatsLastDMMPriority OBJECT-TYPE + + SYNTAX Unsigned32 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "This object indicates the last DMM priority for the CFM MEP." + + ::= { cienaCesCfmMepStatsEntry 37 } + + + + cienaCesCfmMepStatsLastDMMRepeatInterval OBJECT-TYPE + + SYNTAX Unsigned32 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "This object indicates the last DMM repeat interval for the CFM MEP." + + ::= { cienaCesCfmMepStatsEntry 38 } + + + + cienaCesCfmMepStatsLastDMMNumOfDmmToSend OBJECT-TYPE + + SYNTAX Unsigned32 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "This object indicates the number of DMMs to send for the last DMM for the CFM MEP." + + ::= { cienaCesCfmMepStatsEntry 39 } + + + + cienaCesCfmMepStatsLastLMMTargetRemoteMepId OBJECT-TYPE + + SYNTAX Unsigned32 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "This object indicates the last LMM target remote MEP ID for the CFM MEP." + + ::= { cienaCesCfmMepStatsEntry 40 } + + + + cienaCesCfmMepStatsLastLMMTargetMacAddress OBJECT-TYPE + + SYNTAX CienaMacAddress + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "This object indicates the last LMM target MAC Address for the CFM MEP." + + ::= { cienaCesCfmMepStatsEntry 41 } + + + + cienaCesCfmMepStatsLastLMMPriority OBJECT-TYPE + + SYNTAX Unsigned32 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "This object indicates the last LMM priority for the CFM MEP." + + ::= { cienaCesCfmMepStatsEntry 42 } + + + + cienaCesCfmMepStatsLastLMMRepeatInterval OBJECT-TYPE + + SYNTAX Unsigned32 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "This object indicates the last LMM repeat interval for the CFM MEP." + + ::= { cienaCesCfmMepStatsEntry 43 } + + + + cienaCesCfmMepStatsLastLMMNumOfLmmToSend OBJECT-TYPE + + SYNTAX Unsigned32 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "This object indicates the number of LMMs to send for the last LMM for the CFM MEP." + + ::= { cienaCesCfmMepStatsEntry 44 } + + + + cienaCesCfmMepStatsNextLBMSeqNumber OBJECT-TYPE + + SYNTAX Counter32 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "This object indicates the next LBM sequence number received on the given service and port." + + ::= { cienaCesCfmMepStatsEntry 45 } + + + + cienaCesCfmMepStatsNextLTMSeqNumber OBJECT-TYPE + + SYNTAX Counter32 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "This object indicates the next LTM sequence number received on the given service and port." + + ::= { cienaCesCfmMepStatsEntry 46 } + + cienaCesCfmMepStatsTxSyntheticLossMeasurementMessage OBJECT-TYPE + + SYNTAX Counter64 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "The total number of synthetic loss messages transmitted by the CFM MEP." + + ::= { cienaCesCfmMepStatsEntry 47 } + + + + cienaCesCfmMepStatsTxSyntheticLossMeasurementReply OBJECT-TYPE + + SYNTAX Counter64 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "The total number of synthetic loss replies transmitted by the CFM MEP." + + ::= { cienaCesCfmMepStatsEntry 48 } + + + + cienaCesCfmMepStatsRxSyntheticLossMeasurementMessage OBJECT-TYPE + + SYNTAX Counter64 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "The total number of synthetic loss messages received by the CFM MEP." + + ::= { cienaCesCfmMepStatsEntry 49 } + + + + cienaCesCfmMepStatsRxSyntheticLossMeasurementReply OBJECT-TYPE + + SYNTAX Counter64 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "The total number of synthetic loss replies received by the CFM MEP." + + ::= { cienaCesCfmMepStatsEntry 50 } + + cienaCesCfmMepStatsRxValidSyntheticLossMeasurementMessage OBJECT-TYPE + + SYNTAX Counter64 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "The total number valid of synthetic loss messages received by the CFM MEP." + + ::= { cienaCesCfmMepStatsEntry 51 } + + cienaCesCfmMepStatsRxValidSyntheticLossMeasurementReply OBJECT-TYPE + + SYNTAX Counter64 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "The total number valid of synthetic loss replies received by the CFM MEP." + + ::= { cienaCesCfmMepStatsEntry 52 } + + cienaCesCfmMepStatsRxInvalidSyntheticLossMeasurementMessage OBJECT-TYPE + + SYNTAX Counter64 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "The total number invalid of synthetic loss messages received by the CFM MEP." + + ::= { cienaCesCfmMepStatsEntry 53 } + + cienaCesCfmMepStatsRxInvalidSyntheticLossMeasurementReply OBJECT-TYPE + + SYNTAX Counter64 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "The total number invalid of synthetic loss replies received by the CFM MEP." + + ::= { cienaCesCfmMepStatsEntry 54 } + + cienaCesCfmMepStatsRxCCMWithErrorCCMFault OBJECT-TYPE + + SYNTAX Counter64 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "The total number of CCMs with Error CCM fault received by the CFM MEP." + + ::= { cienaCesCfmMepStatsEntry 55 } + + cienaCesCfmMepStatsRxCCMWithXCONFault OBJECT-TYPE + + SYNTAX Counter64 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "The total number of CCMs with XCON fault received by the CFM MEP." + + ::= { cienaCesCfmMepStatsEntry 56 } + + cienaCesCfmMepStatsRxCCMWithRMEPLOCFault OBJECT-TYPE + + SYNTAX Counter64 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "The total number of CCMs with RMEP LOC fault received by the CFM MEP." + + ::= { cienaCesCfmMepStatsEntry 57 } + + cienaCesCfmMepStatsRxCCMWithRDI0 OBJECT-TYPE + + SYNTAX Counter64 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "The total number of CCMs with RDI bit 0 received by the CFM MEP." + + ::= { cienaCesCfmMepStatsEntry 58 } + + cienaCesCfmMepStatsRxCCMWithRDI1 OBJECT-TYPE + + SYNTAX Counter64 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "The total number of CCMs with RDI bit set received by the CFM MEP." + + ::= { cienaCesCfmMepStatsEntry 59 } + + cienaCesCfmMepStatsRxCCMWithSequenceNumberMismatch OBJECT-TYPE + + SYNTAX Counter64 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "The total number of CCMs with sequence number mismatch received by the CFM MEP." + + ::= { cienaCesCfmMepStatsEntry 60 } + + cienaCesCfmMepStatsRxCCMDroppedWithMalformedTlv OBJECT-TYPE + + SYNTAX Counter64 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "The total number of CCMs received by the CFM MEP which were dropped because of malformed TLV." + + ::= { cienaCesCfmMepStatsEntry 61 } + + cienaCesCfmMepStatsToTxLoopbackMessages OBJECT-TYPE + + SYNTAX Counter64 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "The total number of loopback messages left to be transmitted by the CFM MEP." + + ::= { cienaCesCfmMepStatsEntry 62 } + + + + + + + + +-- CFM Remote Mep Statistics + + cienaCesCfmRemoteMepStatsTable OBJECT-TYPE + + SYNTAX SEQUENCE OF CienaCesCfmRemoteMepStatsEntry + + MAX-ACCESS not-accessible + + STATUS current + + DESCRIPTION + + "The (conceptual) table listing the configuration + + parameters for the CFM remote MEP table." + + ::= { cienaCesCfmMepStats 2 } + + + + cienaCesCfmRemoteMepStatsEntry OBJECT-TYPE + + SYNTAX CienaCesCfmRemoteMepStatsEntry + + MAX-ACCESS not-accessible + + STATUS current + + DESCRIPTION + + "An entry (conceptual row) in the cienaCesCfmMepStatsTable." + + INDEX {cienaCesCfmServiceIndex, cienaCesCfmRemoteMEPID } + + ::= { cienaCesCfmRemoteMepStatsTable 1 } + + + + CienaCesCfmRemoteMepStatsEntry ::= SEQUENCE { + + cienaCesCfmRemoteMepStatsRxTotalCCM Counter32, + + cienaCesCfmRemoteMepStatsLastSeqNum Unsigned32, + + cienaCesCfmRemoteMepStatsCCMSeqErrors Unsigned32, + + cienaCesCfmRemoteMepStatsClear CienaStatsClear + + + + } + + + + cienaCesCfmRemoteMepStatsRxTotalCCM OBJECT-TYPE + + SYNTAX Counter32 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "This object is used to show the number of MEP CCM frames received." + + ::= { cienaCesCfmRemoteMepStatsEntry 1 } + + + + cienaCesCfmRemoteMepStatsLastSeqNum OBJECT-TYPE + + SYNTAX Unsigned32 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "This object is used to show the last sequence number." + + ::= { cienaCesCfmRemoteMepStatsEntry 2 } + + + + cienaCesCfmRemoteMepStatsCCMSeqErrors OBJECT-TYPE + + SYNTAX Unsigned32 + + MAX-ACCESS read-only + + STATUS current + + DESCRIPTION + + "This object is used to show the number of MEP CCM frames sequence errors." + + ::= { cienaCesCfmRemoteMepStatsEntry 3 } + + + + cienaCesCfmRemoteMepStatsClear OBJECT-TYPE + + SYNTAX CienaStatsClear + + MAX-ACCESS read-write + + STATUS current + + DESCRIPTION + + "Setting this object to clear(1) resets the statistics for the remote MEP + + for this service." + + ::= { cienaCesCfmRemoteMepStatsEntry 4 } + + + -- + -- CFM Synthetic Loss Measurement Msg Table + -- + cienaCesCfmSyntheticLossSessionTable OBJECT-TYPE + SYNTAX SEQUENCE OF CienaCesCfmSyntheticLossSessionEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The (conceptual) table listing the configuration + parameters for the SyntheticLossMeasurement(SLM) message." + ::= { cienaCesCfmSyntheticLoss 1 } + + cienaCesCfmSyntheticLossSessionEntry OBJECT-TYPE + SYNTAX CienaCesCfmSyntheticLossSessionEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in the cienaCesCfmSyntheticLossSessionTable." + INDEX { + cienaCesCfmSyntheticLossSessionServiceIndex, + cienaCesCfmSyntheticLossSessionLocalMEPId, + cienaCesCfmSyntheticLossSessionTargetMEPId, + cienaCesCfmSyntheticLossSessionTestId + } + ::= { cienaCesCfmSyntheticLossSessionTable 1 } + + CienaCesCfmSyntheticLossSessionEntry ::= SEQUENCE { + cienaCesCfmSyntheticLossSessionServiceIndex Unsigned32, + cienaCesCfmSyntheticLossSessionLocalMEPId Integer32, + cienaCesCfmSyntheticLossSessionTargetMEPId Integer32, + cienaCesCfmSyntheticLossSessionTestId Unsigned32, + cienaCesCfmSyntheticLossSessionServiceName DisplayString, + cienaCesCfmSyntheticLossSessionPriority Unsigned32, + cienaCesCfmSyntheticLossSessionCount Unsigned32, + cienaCesCfmSyntheticLossSessionSLMInterval Unsigned32, + cienaCesCfmSyntheticLossSessionIterations Unsigned32, + cienaCesCfmSyntheticLossSessionRepeatDelay Unsigned32, + cienaCesCfmSyntheticLossSessionFrameSize Unsigned32, + cienaCesCfmSyntheticLossSessionTimeout Unsigned32, + cienaCesCfmSyntheticLossSessionDuration Unsigned32, + cienaCesCfmSyntheticLossSessionLossNearThreshold Integer32, + cienaCesCfmSyntheticLossSessionLossFarThreshold Integer32, + cienaCesCfmSyntheticLossSessionNumSLMSent Unsigned32, + cienaCesCfmSyntheticLossSessionNumSLRReceived Unsigned32, + cienaCesCfmSyntheticLossSessionFrameLossNear Integer32, + cienaCesCfmSyntheticLossSessionFrameLossFar Integer32, + cienaCesCfmSyntheticLossSessionAvgFrameLossNear Integer32, + cienaCesCfmSyntheticLossSessionMinFrameLossNear Integer32, + cienaCesCfmSyntheticLossSessionMaxFrameLossNear Integer32, + cienaCesCfmSyntheticLossSessionAvgFrameLossFar Integer32, + cienaCesCfmSyntheticLossSessionMinFrameLossFar Integer32, + cienaCesCfmSyntheticLossSessionMaxFrameLossFar Integer32, + cienaCesCfmSyntheticLossSessionFrameLossRatioNear CfmFrameLossRatio, + cienaCesCfmSyntheticLossSessionFrameLossRatioFar CfmFrameLossRatio, + cienaCesCfmSyntheticLossSessionSdSetThreshold Integer32, + cienaCesCfmSyntheticLossSessionSdClearThreshold Integer32 + } + cienaCesCfmSyntheticLossSessionServiceIndex OBJECT-TYPE + SYNTAX Unsigned32 (1..4294967295) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This object specifies the service index of the SLM message." + ::= { cienaCesCfmSyntheticLossSessionEntry 1 } + + cienaCesCfmSyntheticLossSessionLocalMEPId OBJECT-TYPE + SYNTAX Integer32 (1..65535) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This object specifies the local mep id of the SLM message." + ::= { cienaCesCfmSyntheticLossSessionEntry 2 } + + cienaCesCfmSyntheticLossSessionTargetMEPId OBJECT-TYPE + SYNTAX Integer32 (1..8191) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This object specifies the target mepid of the SLM message." + ::= { cienaCesCfmSyntheticLossSessionEntry 3 } + + cienaCesCfmSyntheticLossSessionTestId OBJECT-TYPE + SYNTAX Unsigned32 (1..4294967295) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This object specifies the test ID of the SLM message." + ::= { cienaCesCfmSyntheticLossSessionEntry 4 } + + cienaCesCfmSyntheticLossSessionServiceName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object specifies the service name of the SLM message." + ::= { cienaCesCfmSyntheticLossSessionEntry 5 } + + cienaCesCfmSyntheticLossSessionPriority OBJECT-TYPE + SYNTAX Unsigned32 (0..7) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object specifies the priority that will be encoded in the SLM message." + ::= { cienaCesCfmSyntheticLossSessionEntry 6 } + + cienaCesCfmSyntheticLossSessionCount OBJECT-TYPE + SYNTAX Unsigned32 (0 | 2..65535) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object specifies the number of SLM messages that will be transmitted during this session." + ::= { cienaCesCfmSyntheticLossSessionEntry 7 } + + cienaCesCfmSyntheticLossSessionSLMInterval OBJECT-TYPE + SYNTAX Unsigned32 (0 | 3..7) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object specifies the message interval at which SLMs will be transmitted. + The values 3-7 represent indices to CFM intervals as follows: + 3 --> 100ms, + 4 --> 1sec, + 5 --> 10sec, + 6 --> 1min, + 7 --> 10min." + ::= { cienaCesCfmSyntheticLossSessionEntry 8 } + + cienaCesCfmSyntheticLossSessionIterations OBJECT-TYPE + SYNTAX Unsigned32 (0..60) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object specifies the number of iterations the test + has to be conducted. Each test iteration is defined by <cienaCesCfmSyntheticLossMsgSLMInterval, + cienaCesCfmSyntheticLossMsgCount>. Whereas, the test sessions is defined by test iterations over + <cienaCesCfmSyntheticLossMsgRepeatCount>. + If this object specifies zero, it means that test is continuous, and iterations are infinite. " + ::= { cienaCesCfmSyntheticLossSessionEntry 9 } + + cienaCesCfmSyntheticLossSessionRepeatDelay OBJECT-TYPE + SYNTAX Unsigned32 (0..1440) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object specifies the delay in minutes between consecutive test iterations." + ::= { cienaCesCfmSyntheticLossSessionEntry 10 } + + cienaCesCfmSyntheticLossSessionFrameSize OBJECT-TYPE + SYNTAX Unsigned32 (0 | 65..1400) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object specifies the size in bytes of the CFM base frame. + If this object specifies zero there is no padding." + ::= { cienaCesCfmSyntheticLossSessionEntry 11 } + + cienaCesCfmSyntheticLossSessionTimeout OBJECT-TYPE + SYNTAX Unsigned32 (0 | 2000..10000) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object specifies the timeout interval in milliseconds within which + the source should receive a SLR for a corresponding SLM Msg." + ::= { cienaCesCfmSyntheticLossSessionEntry 12 } + + cienaCesCfmSyntheticLossSessionDuration OBJECT-TYPE + SYNTAX Unsigned32 (0..65535) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object specifies the duration of time the test took in milliseconds to complete one iteration." + ::= { cienaCesCfmSyntheticLossSessionEntry 13 } + + cienaCesCfmSyntheticLossSessionLossNearThreshold OBJECT-TYPE + SYNTAX Integer32 (-1..65535) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object represents the Near Loss Threshold Fault for the Synthetic Loss Measurement test. + A value of -1 disables the generation of faults. A value of 0 or greater + is compared to the synthetic loss near result of the + test and a fault is generated if the threshold is exceeded." + ::= { cienaCesCfmSyntheticLossSessionEntry 14 } + + cienaCesCfmSyntheticLossSessionLossFarThreshold OBJECT-TYPE + SYNTAX Integer32 (-1..65535) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object represents the Far Loss Threshold Fault for the Synthetic Loss Measurement test. + A value of -1 disables the generation of faults. A value of 0 or greater + is compared to the synthetic loss near result of the + test and a fault is generated if the threshold is exceeded." + ::= { cienaCesCfmSyntheticLossSessionEntry 15 } + + cienaCesCfmSyntheticLossSessionNumSLMSent OBJECT-TYPE + SYNTAX Unsigned32 (1..65535) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object specifies the number of SLM messages sent in the latest test iteration." + ::= { cienaCesCfmSyntheticLossSessionEntry 16 } + + cienaCesCfmSyntheticLossSessionNumSLRReceived OBJECT-TYPE + SYNTAX Unsigned32 (1..65535) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object specifies the number of SLR messages received in the latest test iteration." + ::= { cienaCesCfmSyntheticLossSessionEntry 17 } + + cienaCesCfmSyntheticLossSessionFrameLossNear OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object specifies the Near Loss Threshold in the latest test iteration." + ::= { cienaCesCfmSyntheticLossSessionEntry 18 } + + cienaCesCfmSyntheticLossSessionFrameLossFar OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object specifies the Far Loss Threshold in the latest test iteration." + ::= { cienaCesCfmSyntheticLossSessionEntry 19 } + + cienaCesCfmSyntheticLossSessionAvgFrameLossNear OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object specifies the average Near Loss Threshold of the test session." + ::= { cienaCesCfmSyntheticLossSessionEntry 20 } + + cienaCesCfmSyntheticLossSessionMinFrameLossNear OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object specifies the minimum Near Loss Threshold of the test session." + ::= { cienaCesCfmSyntheticLossSessionEntry 21 } + + cienaCesCfmSyntheticLossSessionMaxFrameLossNear OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object specifies the maximum Near Loss Threshold of the test session." + ::= { cienaCesCfmSyntheticLossSessionEntry 22 } + + cienaCesCfmSyntheticLossSessionAvgFrameLossFar OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object specifies the average Far Loss Threshold of the test session." + ::= { cienaCesCfmSyntheticLossSessionEntry 23 } + + cienaCesCfmSyntheticLossSessionMinFrameLossFar OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object specifies the minimum Far Loss Threshold of the test session." + ::= { cienaCesCfmSyntheticLossSessionEntry 24 } + + cienaCesCfmSyntheticLossSessionMaxFrameLossFar OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object specifies the maximum Far Loss Threshold of the test session." + ::= { cienaCesCfmSyntheticLossSessionEntry 25 } + + cienaCesCfmSyntheticLossSessionFrameLossRatioNear OBJECT-TYPE + SYNTAX CfmFrameLossRatio + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object specifies the Frame Loss Ratio in percentile of loss at Nearend in the last + iteration of the completed test." + ::= { cienaCesCfmSyntheticLossSessionEntry 26 } + + cienaCesCfmSyntheticLossSessionFrameLossRatioFar OBJECT-TYPE + SYNTAX CfmFrameLossRatio + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object specifies the Frame Loss Ratio in percentile of loss at Farend in the last + iteration of the completed test." + ::= { cienaCesCfmSyntheticLossSessionEntry 27 } + + cienaCesCfmSyntheticLossSessionSdSetThreshold OBJECT-TYPE + SYNTAX Integer32 (-1..65535) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object represents the signal degrade set threshold value for the synthetic loss measurement test. + A value of 0 or greater is compared to the frame loss result and fault is set, if the loss exceeds + this threshold. A value of -1 disables the generation of signal degrade fault notification. + This object works in conjunction with cienaCesCfmSyntheticLossSessionSdClearThreshold. If one object is given + non-default value, other should be also set to non-default value." + + DEFVAL {-1} + ::= { cienaCesCfmSyntheticLossSessionEntry 28 } + + cienaCesCfmSyntheticLossSessionSdClearThreshold OBJECT-TYPE + SYNTAX Integer32 (-1..65535) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object represents the signal degrade clear threshold value for the synthetic loss measurement test. + A value of 0 or greater is compared to the frame loss result and a fault is cleared, if loss + is equal to or below this threshold. A value of -1 disables the generation of signal degrade fault notification + This object works in conjunction with cienaCesCfmSyntheticLossSessionSdSetThreshold. If one object is given + non-default value, other should be also set to non-default value." + + DEFVAL {-1} + ::= { cienaCesCfmSyntheticLossSessionEntry 29 } + + --- + --- Synthetic Loss Responder Table + --- + + cienaCesCfmSyntheticLossResponderTable OBJECT-TYPE + SYNTAX SEQUENCE OF CienaCesCfmSyntheticLossResponderEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The (conceptual) table lists the Synthetic Loss Measurement (SLM) responders." + ::= { cienaCesCfmSyntheticLoss 2 } + + cienaCesCfmSyntheticLossResponderEntry OBJECT-TYPE + SYNTAX CienaCesCfmSyntheticLossResponderEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry (conceptual row) in the cienaCesCfmSyntheticLossResponderTable." + INDEX {cienaCesCfmSyntheticLossResponderServiceIndex, + cienaCesCfmSyntheticLossResponderLocalMEPId, + cienaCesCfmSyntheticLossResponderRemoteMEPId, + cienaCesCfmSyntheticLossResponderTestId } + ::= { cienaCesCfmSyntheticLossResponderTable 1 } + + CienaCesCfmSyntheticLossResponderEntry ::= SEQUENCE { + cienaCesCfmSyntheticLossResponderServiceIndex Unsigned32, + cienaCesCfmSyntheticLossResponderLocalMEPId Integer32, + cienaCesCfmSyntheticLossResponderRemoteMEPId Integer32, + cienaCesCfmSyntheticLossResponderTestId Unsigned32, + cienaCesCfmSyntheticLossResponderServiceName DisplayString, + cienaCesCfmSyntheticLossResponderLocalMac MacAddress, + cienaCesCfmSyntheticLossResponderRemoteMac MacAddress, + cienaCesCfmSyntheticLossResponderNumSLMReceived Unsigned32, + cienaCesCfmSyntheticLossResponderNumSLRSent Unsigned32 + } + + cienaCesCfmSyntheticLossResponderServiceIndex OBJECT-TYPE + SYNTAX Unsigned32 (1..4294967295) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This object specifies the service index of the SLM responder." + ::= { cienaCesCfmSyntheticLossResponderEntry 1 } + + cienaCesCfmSyntheticLossResponderLocalMEPId OBJECT-TYPE + SYNTAX Integer32 (1..8191) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This object specifies the local mep id of the SLM responder." + ::= { cienaCesCfmSyntheticLossResponderEntry 2 } + + cienaCesCfmSyntheticLossResponderRemoteMEPId OBJECT-TYPE + SYNTAX Integer32 (1..8191) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This object specifies the remote mep id of the SLM responder." + ::= { cienaCesCfmSyntheticLossResponderEntry 3 } + + cienaCesCfmSyntheticLossResponderTestId OBJECT-TYPE + SYNTAX Unsigned32 (1..4294967295) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This object specifies the test ID of the SLM responder." + ::= { cienaCesCfmSyntheticLossResponderEntry 4 } + + cienaCesCfmSyntheticLossResponderServiceName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object specifies the service name of the SLM responder." + ::= { cienaCesCfmSyntheticLossResponderEntry 5 } + + cienaCesCfmSyntheticLossResponderLocalMac OBJECT-TYPE + SYNTAX MacAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object identifies the MAC address of the local mep." + ::= { cienaCesCfmSyntheticLossResponderEntry 6 } + + cienaCesCfmSyntheticLossResponderRemoteMac OBJECT-TYPE + SYNTAX MacAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object identifies the MAC address of the remote mep." + ::= { cienaCesCfmSyntheticLossResponderEntry 7 } + + cienaCesCfmSyntheticLossResponderNumSLMReceived OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object specifies the number of SLM frames received by this responder." + ::= { cienaCesCfmSyntheticLossResponderEntry 8 } + + cienaCesCfmSyntheticLossResponderNumSLRSent OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object specifies the number of SLR frames sent by this responder." + ::= { cienaCesCfmSyntheticLossResponderEntry 9 } + + -- + + -- Notifications + + -- + + cienaCesCfmFaultTrapSet NOTIFICATION-TYPE + + OBJECTS { + + + + cienaGlobalSeverity, + + cienaGlobalMacAddress, + + cienaCesCfmServiceName, + + cienaCesCfmServiceType, + + cienaCesCfmServiceValue, + + cienaCesCfmServiceAdminState, + + cienaCesCfmServiceOperState, + + cienaCesCfmServiceMdLevel, + + cienaCesCfmServiceFaultTime, + + cienaCesCfmServiceFaultType, + + cienaCesCfmServiceFaultDesc, + + cienaCesCfmServiceFaultMep, + + cienaCesCfmServiceVsPbtName + + } + + STATUS current + + DESCRIPTION + + "A notification is sent whenever the fault is detected. Setting the + cienaCesCfmFaultTrapState object to 'disabled' causes this trap to be + suppressed. Variable bindings include cienaGlobalSeverity, + cienaGlobalMacAddress, cienaCesCfmServiceName, + cienaCesCfmServiceType, cienaCesCfmServiceValue, + cienaCesCfmServiceAdminState, cienaCesCfmServiceOperState, + cienaCesCfmServiceMdLevel, cienaCesCfmServiceFaultTime, + cienaCesCfmServiceFaultType, cienaCesCfmServiceFaultDesc, + cienaCesCfmServiceFaultMep, and cienaCesCfmServiceVsPbtName." + + ::= { cienaCesCfmNotifMIBNotification 1 } + + + + cienaCesCfmFaultTrapClear NOTIFICATION-TYPE + + OBJECTS { + + + + cienaGlobalSeverity, + + cienaGlobalMacAddress, + + cienaCesCfmServiceName, + + cienaCesCfmServiceType, + + cienaCesCfmServiceValue, + + cienaCesCfmServiceAdminState, + + cienaCesCfmServiceOperState, + + cienaCesCfmServiceMdLevel, + + cienaCesCfmServiceVsPbtName, + + cienaCesCfmServiceFaultTime, + + cienaCesCfmServiceFaultType, + + cienaCesCfmServiceFaultDesc, + + cienaCesCfmServiceFaultMep + + } + + STATUS current + + DESCRIPTION + + "A notification is sent whenever the fault is resolved and cleared. Setting the + cienaCesCfmFaultTrapState object to 'disabled' causes this trap to be + suppressed. Variable bindings include: cienaGlobalSeverity, + cienaGlobalMacAddress, cienaCesCfmServiceName, + cienaCesCfmServiceType, cienaCesCfmServiceValue, + cienaCesCfmServiceAdminState, cienaCesCfmServiceOperState, + cienaCesCfmServiceMdLevel, cienaCesCfmServiceVsPbtName, + cienaCesCfmServiceFaultTime, cienaCesCfmServiceFaultType, + cienaCesCfmServiceFaultDesc, and cienaCesCfmServiceFaultMep." + + ::= { cienaCesCfmNotifMIBNotification 2 } + + + + cienaCesCfmAverageDelayFaultTrapSet NOTIFICATION-TYPE + + OBJECTS { + + + + cienaGlobalSeverity, + + cienaGlobalMacAddress, + + cienaCesCfmDelayMsgServiceName, + + cienaCesCfmDelayMsgLocalMEPId, + + cienaCesCfmDelayMsgAverageDelayThreshold, + + cienaCesCfmDelayMsgAverageDelay + + } + + STATUS current + + DESCRIPTION + + "A notification is sent whenever average delay goes above delay-threshold + during a delay measurement test. Setting the cienaCesCfmDelayFaultTrapState + object to 'disabled' causes this trap to be suppressed. Variable bindings + include: cienaGlobalSeverity, cienaGlobalMacAddress, + cienaCesCfmDelayMsgServiceName, cienaCesCfmDelayMsgLocalMEPId, + cienaCesCfmDelayMsgAverageDelayThreshold, and cienaCesCfmDelayMsgAverageDelay." + + ::= { cienaCesCfmNotifMIBNotification 3 } + + + + cienaCesCfmAverageDelayFaultTrapClear NOTIFICATION-TYPE + + OBJECTS { + + + + cienaGlobalSeverity, + + cienaGlobalMacAddress, + + cienaCesCfmDelayMsgServiceName, + + cienaCesCfmDelayMsgLocalMEPId, + + cienaCesCfmDelayMsgAverageDelayThreshold, + + cienaCesCfmDelayMsgAverageDelay + + } + + STATUS current + + DESCRIPTION + + "A notification is sent whenever average delay comes back to normal. Setting the + cienaCesCfmDelayFaultTrapState object to 'disabled' causes this trap to be + suppressed. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, + cienaCesCfmDelayMsgServiceName, cienaCesCfmDelayMsgLocalMEPId, + cienaCesCfmDelayMsgAverageDelayThreshold, and cienaCesCfmDelayMsgAverageDelay." + + ::= { cienaCesCfmNotifMIBNotification 4 } + + + + cienaCesCfmMaximumDelayFaultTrapSet NOTIFICATION-TYPE + + OBJECTS { + + + + cienaGlobalSeverity, + + cienaGlobalMacAddress, + + cienaCesCfmDelayMsgServiceName, + + cienaCesCfmDelayMsgLocalMEPId, + + cienaCesCfmDelayMsgMaximumDelayThreshold, + + cienaCesCfmDelayMsgMaximumDelay + + } + + STATUS current + + DESCRIPTION + + "A notification is sent whenever maximum delay goes above delay-threshold during + a delay measurement test. Setting the cienaCesCfmDelayFaultTrapState object to + 'disabled' causes this trap to be suppressed. Variable bindings include: + cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesCfmDelayMsgServiceName, + cienaCesCfmDelayMsgLocalMEPId, cienaCesCfmDelayMsgMaximumDelayThreshold, and + cienaCesCfmDelayMsgMaximumDelay." + + ::= { cienaCesCfmNotifMIBNotification 5 } + + + + cienaCesCfmMaximumDelayFaultTrapClear NOTIFICATION-TYPE + + OBJECTS { + + + + cienaGlobalSeverity, + + cienaGlobalMacAddress, + + cienaCesCfmDelayMsgServiceName, + + cienaCesCfmDelayMsgLocalMEPId, + + cienaCesCfmDelayMsgMaximumDelayThreshold, + + cienaCesCfmDelayMsgMaximumDelay + + } + + STATUS current + + DESCRIPTION + + "A notification is sent whenever maximum delay comes back to normal. Setting + the cienaCesCfmDelayFaultTrapState object to 'disabled' causes this trap to + be suppressed. Variable bindings include: cienaGlobalSeverity, + cienaGlobalMacAddress, cienaCesCfmDelayMsgServiceName, cienaCesCfmDelayMsgLocalMEPId, + cienaCesCfmDelayMsgMaximumDelayThreshold, and cienaCesCfmDelayMsgMaximumDelay." + + ::= { cienaCesCfmNotifMIBNotification 6 } + + + + cienaCesCfmAverageJitterTrapSet NOTIFICATION-TYPE + + OBJECTS { + + + + cienaGlobalSeverity, + + cienaGlobalMacAddress, + + cienaCesCfmDelayMsgServiceName, + + cienaCesCfmDelayMsgLocalMEPId, + + cienaCesCfmDelayMsgAverageJitterThreshold, + + cienaCesCfmDelayMsgAverageJitter + + } + + STATUS current + + DESCRIPTION + + "A notification is sent whenever average jitter goes above average jitter-threshold + during a jitter measurement test. Setting the cienaCesCfmJitterFaultTrapState object + to 'disabled' causes this trap to be suppressed. Variable bindings include: + cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesCfmDelayMsgServiceName, + cienaCesCfmDelayMsgLocalMEPId, cienaCesCfmDelayMsgAverageJitterThreshold, and + cienaCesCfmDelayMsgAverageJitter." + + ::= { cienaCesCfmNotifMIBNotification 7 } + + + + cienaCesCfmAverageJitterTrapClear NOTIFICATION-TYPE + + OBJECTS { + + + + cienaGlobalSeverity, + + cienaGlobalMacAddress, + + cienaCesCfmDelayMsgServiceName, + + cienaCesCfmDelayMsgLocalMEPId, + + cienaCesCfmDelayMsgAverageJitterThreshold, + + cienaCesCfmDelayMsgAverageJitter + + } + + STATUS current + + DESCRIPTION + + "A notification is sent whenever average jitter comes back to normal. Setting + the cienaCesCfmJitterFaultTrapState object to 'disabled' causes this trap to be + suppressed. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, + cienaCesCfmDelayMsgServiceName, cienaCesCfmDelayMsgLocalMEPId, + cienaCesCfmDelayMsgAverageJitterThreshold, and cienaCesCfmDelayMsgAverageJitter." + + ::= { cienaCesCfmNotifMIBNotification 8 } + + + + cienaCesCfmMaximumJitterTrapSet NOTIFICATION-TYPE + + OBJECTS { + + + + cienaGlobalSeverity, + + cienaGlobalMacAddress, + + cienaCesCfmDelayMsgServiceName, + + cienaCesCfmDelayMsgLocalMEPId, + + cienaCesCfmDelayMsgMaximumJitterThreshold, + + cienaCesCfmDelayMsgMaximumJitter + + } + + STATUS current + + DESCRIPTION + + "A notification is sent whenever maximum jitter goes above maximum jitter-threshold during + a jitter measurement test. Setting the cienaCesCfmJitterFaultTrapState object to 'disabled' + causes this trap to be suppressed. Variable bindings include: cienaGlobalSeverity, + cienaGlobalMacAddress, cienaCesCfmDelayMsgServiceName, cienaCesCfmDelayMsgLocalMEPId, + cienaCesCfmDelayMsgMaximumJitterThreshold, and cienaCesCfmDelayMsgMaximumJitter." + + ::= { cienaCesCfmNotifMIBNotification 9 } + + + + cienaCesCfmMaximumJitterTrapClear NOTIFICATION-TYPE + + OBJECTS { + + + + cienaGlobalSeverity, + + cienaGlobalMacAddress, + + cienaCesCfmDelayMsgServiceName, + + cienaCesCfmDelayMsgLocalMEPId, + + cienaCesCfmDelayMsgMaximumJitterThreshold, + + cienaCesCfmDelayMsgMaximumJitter + + } + + STATUS current + + DESCRIPTION + + "A notification is sent whenever maximum jitter comes back to normal. Setting + the cienaCesCfmJitterFaultTrapState object to 'disabled' causes this trap to be + suppressed. Variable bindings include: cienaGlobalSeverity,cienaGlobalMacAddress, + cienaCesCfmDelayMsgServiceName, cienaCesCfmDelayMsgLocalMEPId, + cienaCesCfmDelayMsgMaximumJitterThreshold, and cienaCesCfmDelayMsgMaximumJitter." + + ::= { cienaCesCfmNotifMIBNotification 10 } + + + + cienaCesCfmFrameLossNearTrapSet NOTIFICATION-TYPE + + OBJECTS { + + + + cienaGlobalSeverity, + + cienaGlobalMacAddress, + + cienaCesCfmFrameLossMsgServiceName, + + cienaCesCfmFrameLossMsgLocalMEPId, + + cienaCesCfmFrameLossMsgNearLossThreshold, + + cienaCesCfmFrameLossMsgFrameLossNear + + } + + STATUS current + + DESCRIPTION + + "A notification is sent whenever frame-loss-near goes above frame-loss-near threshold during a + frame loss measurement test. Setting the cienaCesCfmFrameLossNearFaultTrapState object to + 'disabled' causes this trap to be suppressed. Variable bindings include: cienaGlobalSeverity, + cienaGlobalMacAddress, cienaCesCfmFrameLossMsgServiceName,cienaCesCfmFrameLossMsgLocalMEPId, + cienaCesCfmFrameLossMsgNearLossThreshold, and cienaCesCfmFrameLossMsgFrameLossNear." + + ::= { cienaCesCfmNotifMIBNotification 11 } + + + + cienaCesCfmFrameLossNearTrapClear NOTIFICATION-TYPE + + OBJECTS { + + + + cienaGlobalSeverity, + + cienaCesCfmFrameLossMsgServiceName, + + cienaCesCfmFrameLossMsgLocalMEPId, + + cienaCesCfmFrameLossMsgNearLossThreshold, + + cienaCesCfmFrameLossMsgFrameLossNear + + } + + STATUS current + + DESCRIPTION + + "A notification is sent whenever frame-loss-near returns to normal during a + frame loss measurement test. Setting the cienaCesCfmFrameLossNearFaultTrapState + object to 'disabled' causes this trap to be suppressed. Variable bindings include: + cienaGlobalSeverity, cienaCesCfmFrameLossMsgServiceName, + cienaCesCfmFrameLossMsgLocalMEPId, cienaCesCfmFrameLossMsgNearLossThreshold, and + cienaCesCfmFrameLossMsgFrameLossNear." + + ::= { cienaCesCfmNotifMIBNotification 12 } + + + + cienaCesCfmFrameLossFarTrapSet NOTIFICATION-TYPE + + OBJECTS { + + + + cienaGlobalSeverity, + + cienaGlobalMacAddress, + + cienaCesCfmFrameLossMsgServiceName, + + cienaCesCfmFrameLossMsgLocalMEPId, + + cienaCesCfmFrameLossMsgFarLossThreshold, + + cienaCesCfmFrameLossMsgFrameLossFar + + + + } + + STATUS current + + DESCRIPTION + + "A notification is sent whenever frame-loss-far goes above frame-loss-far threshold during a + frame loss measurement test. Setting the cienaCesCfmFrameLossFarFaultTrapState object to + 'disabled' causes this trap to be suppressed. Variable bindings include: cienaGlobalSeverity, + cienaGlobalMacAddress, cienaCesCfmFrameLossMsgServiceName, cienaCesCfmFrameLossMsgLocalMEPId, + cienaCesCfmFrameLossMsgFarLossThreshold, and cienaCesCfmFrameLossMsgFrameLossFar." + + ::= { cienaCesCfmNotifMIBNotification 13 } + + + + cienaCesCfmFrameLossFarTrapClear NOTIFICATION-TYPE + + OBJECTS { + + + + cienaGlobalSeverity, + + cienaGlobalMacAddress, + + cienaCesCfmFrameLossMsgServiceName, + + cienaCesCfmFrameLossMsgLocalMEPId, + + cienaCesCfmFrameLossMsgFarLossThreshold, + + cienaCesCfmFrameLossMsgFrameLossFar + + + + } + + STATUS current + + DESCRIPTION + + "A notification is sent whenever frame-loss-far returns to normal during a + frame loss measurement test. Setting the cienaCesCfmFrameLossFarFaultTrapState + object to 'disabled' causes this trap to be suppressed. Variable bindings + include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesCfmFrameLossMsgServiceName, + cienaCesCfmFrameLossMsgLocalMEPId, cienaCesCfmFrameLossMsgFarLossThreshold, and + cienaCesCfmFrameLossMsgFrameLossFar." + + ::= { cienaCesCfmNotifMIBNotification 14 } + + cienaCesSyntheticLossSessionNearFaultTrap NOTIFICATION-TYPE + OBJECTS { + cienaGlobalSeverity, + cienaGlobalMacAddress, + cienaCesCfmSyntheticLossSessionServiceName, + cienaCesCfmSyntheticLossSessionFrameLossNear, + cienaCesCfmSyntheticLossSessionLossNearThreshold + } + STATUS current + DESCRIPTION + "A notification is sent whenever the fault is detected during + a Synthetic Loss Measurement test with a near loss threshold fault. Setting the + cienaCesCfmSyntheticLossNearFaultTrapState object to 'disabled' causes this trap to be suppressed. + Variable bindings include : cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesCfmSyntheticLossSessionServiceName, + cienaCesCfmSyntheticLossSessionFrameLossNear, cienaCesCfmSyntheticLossSessionLossNearThreshold." + ::= { cienaCesCfmNotifMIBNotification 15} + + cienaCesSyntheticLossSessionFarFaultTrap NOTIFICATION-TYPE + OBJECTS { + cienaGlobalSeverity, + cienaGlobalMacAddress, + cienaCesCfmSyntheticLossSessionServiceName, + cienaCesCfmSyntheticLossSessionFrameLossFar, + cienaCesCfmSyntheticLossSessionLossFarThreshold + } + STATUS current + DESCRIPTION + "A notification is sent whenever the fault is detected during + a Synthetic Loss Measurement test with a far loss threshold fault. Setting the + cienaCesCfmSyntheticLossFarFaultTrapState object to 'disabled' causes this trap to be suppressed. + Variable bindings include: cienaCesCfmSyntheticLossSessionServiceName, cienaCesCfmSyntheticLossSessionFrameLossFar, + cienaCesCfmSyntheticLossSessionLossFarThreshold." + ::= { cienaCesCfmNotifMIBNotification 16} + + cienaCesSyntheticLossSessionNearFaultClearTrap NOTIFICATION-TYPE + OBJECTS { + cienaGlobalSeverity, + cienaGlobalMacAddress, + cienaCesCfmSyntheticLossSessionServiceName, + cienaCesCfmSyntheticLossSessionFrameLossNear, + cienaCesCfmSyntheticLossSessionLossNearThreshold + } + STATUS current + DESCRIPTION + "A notification is sent whenever the fault is cleared during + a Synthetic Loss Measurement test with a near loss threshold fault.Setting the + cienaCesCfmSyntheticLossNearFaultTrapState object to 'disabled' causes this trap to be suppressed. + Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesCfmSyntheticLossSessionServiceName, + cienaCesCfmSyntheticLossSessionFrameLossNear, cienaCesCfmSyntheticLossSessionLossNearThreshold." + + ::= { cienaCesCfmNotifMIBNotification 17} + + cienaCesSyntheticLossSessionFarFaultClearTrap NOTIFICATION-TYPE + OBJECTS { + cienaGlobalSeverity, + cienaGlobalMacAddress, + cienaCesCfmSyntheticLossSessionServiceName, + cienaCesCfmSyntheticLossSessionFrameLossFar, + cienaCesCfmSyntheticLossSessionLossFarThreshold + } + STATUS current + DESCRIPTION + "A notification is sent whenever the fault is cleared during + a Synthetic Loss Measurement test with a far loss threshold fault.Setting the + cienaCesCfmSyntheticLossFarFaultTrapState object to 'disabled' causes this trap to be suppressed. + Variable Bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesCfmSyntheticLossSessionServiceName, + cienaCesCfmSyntheticLossSessionFrameLossFar,cienaCesCfmSyntheticLossSessionLossFarThreshold" + + ::= { cienaCesCfmNotifMIBNotification 18} + + cienaCesCfmAverageDelayVariationTrapSet NOTIFICATION-TYPE + OBJECTS { cienaGlobalSeverity, + cienaGlobalMacAddress, + cienaCesCfmDelayMsgServiceName, + cienaCesCfmDelayMsgLocalMEPId, + cienaCesCfmDelayMsgAverageDelayVariationThreshold, + cienaCesCfmDelayMsgAverageDelayVariation + } + STATUS current + DESCRIPTION + "A notification is sent whenever Average Delay Variation goes above Average Delay Variation threshold during + a Delay Variation measurement test. Setting the cienaCesCfmDelayVariationFaultTrapState object to 'disabled' + causes this trap to be suppressed. Variable bindings include: cienaGlobalSeverity, + cienaGlobalMacAddress, cienaCesCfmDelayMsgServiceName, cienaCesCfmDelayMsgLocalMEPId, + cienaCesCfmDelayMsgAverageDelayVariationThreshold, and cienaCesCfmDelayMsgAverageDelayVariation." + ::= { cienaCesCfmNotifMIBNotification 19} + + cienaCesCfmAverageDelayVariationTrapClear NOTIFICATION-TYPE + OBJECTS { cienaGlobalSeverity, + cienaGlobalMacAddress, + cienaCesCfmDelayMsgServiceName, + cienaCesCfmDelayMsgLocalMEPId, + cienaCesCfmDelayMsgAverageDelayVariationThreshold, + cienaCesCfmDelayMsgAverageDelayVariation + } + STATUS current + DESCRIPTION + "A notification is sent whenever Average Delay Variation comes back below the threshold level during + a Delay Variation measurement test. Setting the cienaCesCfmDelayVariationFaultTrapState object to 'disabled' + causes this trap to be suppressed. Variable bindings include: cienaGlobalSeverity, + cienaGlobalMacAddress, cienaCesCfmDelayMsgServiceName, cienaCesCfmDelayMsgLocalMEPId, + cienaCesCfmDelayMsgAverageDelayVariationThreshold, and cienaCesCfmDelayMsgAverageDelayVariation." + ::= { cienaCesCfmNotifMIBNotification 20} + + cienaCesCfmMaximumDelayVariationTrapSet NOTIFICATION-TYPE + OBJECTS { cienaGlobalSeverity, + cienaGlobalMacAddress, + cienaCesCfmDelayMsgServiceName, + cienaCesCfmDelayMsgLocalMEPId, + cienaCesCfmDelayMsgMaximumDelayVariationThreshold, + cienaCesCfmDelayMsgMaximumDelayVariation + } + STATUS current + DESCRIPTION + "A notification is sent whenever Maximum Delay Variation goes above Maximum Delay Variation threshold during + a Delay Variation measurement test. Setting the cienaCesCfmDelayVariationFaultTrapState object to 'disabled' + causes this trap to be suppressed. Variable bindings include: cienaGlobalSeverity, + cienaGlobalMacAddress, cienaCesCfmDelayMsgServiceName, cienaCesCfmDelayMsgLocalMEPId, + cienaCesCfmDelayMsgMaximumDelayVariationThreshold, and cienaCesCfmDelayMsgMaximumDelayVariation." + ::= { cienaCesCfmNotifMIBNotification 21} + + cienaCesCfmMaximumDelayVariationTrapClear NOTIFICATION-TYPE + OBJECTS { cienaGlobalSeverity, + cienaGlobalMacAddress, + cienaCesCfmDelayMsgServiceName, + cienaCesCfmDelayMsgLocalMEPId, + cienaCesCfmDelayMsgMaximumDelayVariationThreshold, + cienaCesCfmDelayMsgMaximumDelayVariation + } + STATUS current + DESCRIPTION + "A notification is sent whenever Maximum Delay Variation comes back below the threshold level during + a Delay Variation measurement test. Setting the cienaCesCfmDelayVariationFaultTrapState object to 'disabled' + causes this trap to be suppressed. Variable bindings include: cienaGlobalSeverity, + cienaGlobalMacAddress, cienaCesCfmDelayMsgServiceName, cienaCesCfmDelayMsgLocalMEPId, + cienaCesCfmDelayMsgMaximumDelayVariationThreshold, and cienaCesCfmDelayMsgMaximumDelayVariation." + ::= { cienaCesCfmNotifMIBNotification 22} + + cienaCesCfmSyntheticLossSessionSignalDegradeFaultTrapSet NOTIFICATION-TYPE + OBJECTS { cienaGlobalSeverity, + cienaGlobalMacAddress, + cienaCesCfmServiceName, + cienaCesCfmSyntheticLossSessionFrameLossNear, + cienaCesCfmSyntheticLossSessionFrameLossFar, + cienaCesCfmSyntheticLossSessionSdSetThreshold + } + STATUS current + DESCRIPTION + "A notification is sent whenever the signal degrade fault is detected during + a Synthetic Loss Measurement test." + ::= { cienaCesCfmNotifMIBNotification 23} + + cienaCesCfmSyntheticLossSessionSignalDegradeFaultTrapClear NOTIFICATION-TYPE + OBJECTS { cienaGlobalSeverity, + cienaGlobalMacAddress, + cienaCesCfmServiceName, + cienaCesCfmSyntheticLossSessionFrameLossNear, + cienaCesCfmSyntheticLossSessionFrameLossFar, + cienaCesCfmSyntheticLossSessionSdClearThreshold + } + STATUS current + DESCRIPTION + "A notification is sent whenever the signal degrade fault is cleared during + a Synthetic Loss Measurement test." + ::= { cienaCesCfmNotifMIBNotification 24} + + END |