diff options
Diffstat (limited to 'MIBS/ccpower/CCPOWER-MIB')
| -rw-r--r-- | MIBS/ccpower/CCPOWER-MIB | 1549 |
1 files changed, 1549 insertions, 0 deletions
diff --git a/MIBS/ccpower/CCPOWER-MIB b/MIBS/ccpower/CCPOWER-MIB new file mode 100644 index 0000000..ec8731f --- /dev/null +++ b/MIBS/ccpower/CCPOWER-MIB @@ -0,0 +1,1549 @@ +--
+-- C&C Power DC_SYSTEM MIB
+-- Management Information Base for SNMP Network Management
+--
+-- Copyright 2004 C&C Power, Inc.
+--
+-- C&C Power shall not be liable for technical or
+-- editorial errors or omissions contained herein. The information in
+-- this document is provided "as is" without warranty of any kind and
+-- is subject to change without notice. The warranties for C&C Power products
+-- are set forth in the express limited warranty statements
+-- accompanying such products. Nothing herein should be construed as
+-- constituting an additional warranty.
+--
+-- The C&C Power Enterprise number is 18642.
+-- The ASN.1 prefix to, and including the C&C Power Enterprise is:
+-- 1.3.6.1.4.1.18642
+--
+-- MIB Version 1.0
+-- *********************************************************************
+-- Release History
+-- Initial Release Date: August 9, 2004 (Version 1.0)
+-- Author: Jeff Gear
+-- Revision History
+-- Date:
+-- Revision:
+-- *********************************************************************
+
+CCPOWER-MIB DEFINITIONS ::= BEGIN
+
+ IMPORTS
+ enterprises FROM RFC1155-SMI
+ DisplayString FROM RFC1213-MIB
+ OBJECT-TYPE FROM RFC-1212
+ TRAP-TYPE FROM RFC-1215;
+
+ ccpower OBJECT IDENTIFIER ::= { enterprises 18642 }
+ dcSystem OBJECT IDENTIFIER ::= { ccpower 1 }
+
+-- *********************************************************************
+-- readWriteObjects definition
+-- *********************************************************************
+
+ readWriteObjects OBJECT IDENTIFIER ::= { dcSystem 1 }
+
+-- *********************************************************************
+-- readWriteObjects.settings definition
+-- *********************************************************************
+
+ settings OBJECT IDENTIFIER ::= { readWriteObjects 1 }
+
+ floatVoltage OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION "Rectifier DC Output Voltage.
+ Return value is XXX representing XX.X volts."
+ ::= { settings 1 }
+
+ overloadCurrent OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION "Current which when exceeded will cause an alarm.
+ Return value is XXXX representing XXXX amps."
+ ::= { settings 2 }
+
+ highVoltageAlarm OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION "Voltage which when exceeded will cause an alarm.
+ Return value is XXX representing XX.X volts."
+ ::= { settings 3 }
+
+ lowVoltageAlarm OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION "Voltage which when exceeded will cause an alarm.
+ Return value is XXX representing XX.X volts."
+ ::= { settings 4 }
+
+ disconnect1Voltage OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION "Voltage which when exceeded will cause a specific load to disconnect.
+ Return value is XXX representing XX.X volts."
+ ::= { settings 5 }
+
+ disconnect1Temperature OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION "Temperature which when exceeded will cause a specific load to disconnect.
+ Return value is XX representing XX °C."
+ ::= { settings 6 }
+
+ disconnect1LoadShedSundayOff OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION "Time on Sunday which when reached will cause a specific load to disconnect.
+ Return value is XX:XX representing HH:MM."
+ ::= { settings 7 }
+
+ disconnect1LoadShedMondayOff OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION "Time on Monday which when reached will cause a specific load to disconnect.
+ Return value is XX:XX representing HH:MM."
+ ::= { settings 8 }
+
+ disconnect1LoadShedTuesdayOff OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION "Time on Tuesday which when reached will cause a specific load to disconnect.
+ Return value is XX:XX representing HH:MM."
+ ::= { settings 9 }
+
+ disconnect1LoadShedWednesdayOff OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION "Time on Wednesday which when reached will cause a specific load to disconnect.
+ Return value is XX:XX representing HH:MM."
+ ::= { settings 10 }
+
+ disconnect1LoadShedThursdayOff OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION "Time on Thursday which when reached will cause a specific load to disconnect.
+ Return value is XX:XX representing HH:MM."
+ ::= { settings 11 }
+
+ disconnect1LoadShedFridayOff OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION "Time on Friday which when reached will cause a specific load to disconnect.
+ Return value is XX:XX representing HH:MM."
+ ::= { settings 12 }
+
+ disconnect1LoadShedSaturdayOff OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION "Time on Saturday which when reached will cause a specific load to disconnect.
+ Return value is XX:XX representing HH:MM."
+ ::= { settings 13 }
+
+ disconnect2Voltage OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION "Voltage which when exceeded will cause a specific load to disconnect.
+ Return value is XXX representing XX.X volts."
+ ::= { settings 14 }
+
+ disconnect2Temperature OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION "Temperature which when exceeded will cause a specific load to disconnect.
+ Return value is XX representing XX °C."
+ ::= { settings 15 }
+
+ disconnect2LoadShedSundayOff OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION "Time on Sunday which when reached will cause a specific load to disconnect.
+ Return value is XX:XX representing HH:MM."
+ ::= { settings 16 }
+
+ disconnect2LoadShedMondayOff OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION "Time on Monday which when reached will cause a specific load to disconnect.
+ Return value is XX:XX representing HH:MM."
+ ::= { settings 17 }
+
+ disconnect2LoadShedTuesdayOff OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION "Time on Tuesday which when reached will cause a specific load to disconnect.
+ Return value is XX:XX representing HH:MM."
+ ::= { settings 18 }
+
+ disconnect2LoadShedWednesdayOff OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION "Time on Wednesday which when reached will cause a specific load to disconnect.
+ Return value is XX:XX representing HH:MM."
+ ::= { settings 19 }
+
+ disconnect2LoadShedThursdayOff OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION "Time on Thursday which when reached will cause a specific load to disconnect.
+ Return value is XX:XX representing HH:MM."
+ ::= { settings 20 }
+
+ disconnect2LoadShedFridayOff OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION "Time on Friday which when reached will cause a specific load to disconnect.
+ Return value is XX:XX representing HH:MM."
+ ::= { settings 21 }
+
+ disconnect2LoadShedSaturdayOff OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION "Time on Saturday which when reached will cause a specific load to disconnect.
+ Return value is XX:XX representing HH:MM."
+ ::= { settings 22 }
+
+ disconnect3Voltage OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION "Voltage which when exceeded will cause a specific load to disconnect.
+ Return value is XXX representing XX.X volts."
+ ::= { settings 23 }
+
+ disconnect3Temperature OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION "Temperature which when exceeded will cause a specific load to disconnect.
+ Return value is XX representing XX °C."
+ ::= { settings 24 }
+
+ disconnect3LoadShedSundayOff OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION "Time on Sunday which when reached will cause a specific load to disconnect.
+ Return value is XX:XX representing HH:MM."
+ ::= { settings 25 }
+
+ disconnect3LoadShedMondayOff OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION "Time on Monday which when reached will cause a specific load to disconnect.
+ Return value is XX:XX representing HH:MM."
+ ::= { settings 26 }
+
+ disconnect3LoadShedTuesdayOff OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION "Time on Tuesday which when reached will cause a specific load to disconnect.
+ Return value is XX:XX representing HH:MM."
+ ::= { settings 27 }
+
+ disconnect3LoadShedWednesdayOff OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION "Time on Wednesday which when reached will cause a specific load to disconnect.
+ Return value is XX:XX representing HH:MM."
+ ::= { settings 28 }
+
+ disconnect3LoadShedThursdayOff OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION "Time on Thursday which when reached will cause a specific load to disconnect.
+ Return value is XX:XX representing HH:MM."
+ ::= { settings 29 }
+
+ disconnect3LoadShedFridayOff OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION "Time on Friday which when reached will cause a specific load to disconnect.
+ Return value is XX:XX representing HH:MM."
+ ::= { settings 30 }
+
+ disconnect3LoadShedSaturdayOff OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION "Time on Saturday which when reached will cause a specific load to disconnect.
+ Return value is XX:XX representing HH:MM."
+ ::= { settings 31 }
+
+ reconnect1Voltage OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION "Voltage which when reached will cause a specific load to reconnect.
+ Return value is XXX representing XX.X volts."
+ ::= { settings 32 }
+
+ reconnect1LoadShedSundayOn OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION "Time which when reached will cause a specific load to reconnect.
+ Return value is XX:XX representing HH:MM."
+ ::= { settings 33 }
+
+ reconnect1LoadShedMondayOn OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION "Time on Monday which when reached will cause a specific load to reconnect.
+ Return value is XX:XX representing HH:MM."
+ ::= { settings 34 }
+
+ reconnect1LoadShedTuesdayOn OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION "Time on Tuesday which when reached will cause a specific load to reconnect.
+ Return value is XX:XX representing HH:MM."
+ ::= { settings 35 }
+
+ reconnect1LoadShedWednesdayOn OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION "Time on Wednesday which when reached will cause a specific load to reconnect.
+ Return value is XX:XX representing HH:MM."
+ ::= { settings 36 }
+
+ reconnect1LoadShedThursdayOn OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION "Time on Thursday which when reached will cause a specific load to reconnect.
+ Return value is XX:XX representing HH:MM."
+ ::= { settings 37 }
+
+ reconnect1LoadShedFridayOn OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION "Time on Friday which when reached will cause a specific load to reconnect.
+ Return value is XX:XX representing HH:MM."
+ ::= { settings 38 }
+
+ reconnect1LoadShedSaturdayOn OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION "Time on Saturday which when reached will cause a specific load to reconnect.
+ Return value is XX:XX representing HH:MM."
+ ::= { settings 39 }
+
+ reconnect2Voltage OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION "Voltage which when reached will cause a specific load to reconnect.
+ Return value is XXX representing XX.X volts."
+ ::= { settings 40 }
+
+ reconnect2LoadShedSundayOn OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION "Time on Sunday which when reached will cause a specific load to reconnect.
+ Return value is XX:XX representing HH:MM."
+ ::= { settings 41 }
+
+ reconnect2LoadShedMondayOn OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION "Time on Monday which when reached will cause a specific load to reconnect.
+ Return value is XX:XX representing HH:MM."
+ ::= { settings 42 }
+
+ reconnect2LoadShedTuesdayOn OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION "Time on Tuesday which when reached will cause a specific load to reconnect.
+ Return value is XX:XX representing HH:MM."
+ ::= { settings 43 }
+
+ reconnect2LoadShedWednesdayOn OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION "Time on Wednesday which when reached will cause a specific load to reconnect.
+ Return value is XX:XX representing HH:MM."
+ ::= { settings 44 }
+
+ reconnect2LoadShedThursdayOn OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION "Time on Thursday which when reached will cause a specific load to reconnect.
+ Return value is XX:XX representing HH:MM."
+ ::= { settings 45 }
+
+ reconnect2LoadShedFridayOn OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION "Time on Friday which when reached will cause a specific load to reconnect.
+ Return value is XX:XX representing HH:MM."
+ ::= { settings 46 }
+
+ reconnect2LoadShedSaturdayOn OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION "Time on Saturday which when reached will cause a specific load to reconnect.
+ Return value is XX:XX representing HH:MM."
+ ::= { settings 47 }
+
+ reconnect3Voltage OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION "Voltage which when reached will cause a specific load to reconnect.
+ Return value is XXX representing XX.X volts."
+ ::= { settings 48 }
+
+ reconnect3LoadShedSundayOn OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION "Time on Sunday which when reached will cause a specific load to reconnect.
+ Return value is XX:XX representing HH:MM."
+ ::= { settings 49 }
+
+ reconnect3LoadShedMondayOn OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION "Time on Monday which when reached will cause a specific load to reconnect.
+ Return value is XX:XX representing HH:MM."
+ ::= { settings 50 }
+
+ reconnect3LoadShedTuesdayOn OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION "Time on Tuesday which when reached will cause a specific load to reconnect.
+ Return value is XX:XX representing HH:MM."
+ ::= { settings 51 }
+
+ reconnect3LoadShedWednesdayOn OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION "Time on Wednesday which when reached will cause a specific load to reconnect.
+ Return value is XX:XX representing HH:MM."
+ ::= { settings 52 }
+
+ reconnect3LoadShedThursdayOn OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION "Time on Thursday which when reached will cause a specific load to reconnect.
+ Return value is XX:XX representing HH:MM."
+ ::= { settings 53 }
+
+ reconnect3LoadShedFridayOn OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION "Time on Friday which when reached will cause a specific load to reconnect.
+ Return value is XX:XX representing HH:MM."
+ ::= { settings 54 }
+
+ reconnect3LoadShedSaturdayOn OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION "Time on Saturday which when reached will cause a specific load to reconnect.
+ Return value is XX:XX representing HH:MM."
+ ::= { settings 55 }
+
+ equalizeTime OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION "Number of hours the equalize voltage is to be applied.
+ Return value is XXX representing XX.X hours."
+ ::= { settings 56 }
+
+ equalizeVoltage OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION "Equalize voltage to be applied.
+ Return value is XXX representing XX.X volts."
+ ::= { settings 57 }
+
+ batteryResistancePercentChange OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION "Resistance percentange change that when reached will cause an alarm.
+ Return value is XXX representing XXX %."
+ ::= { settings 58 }
+
+ batteryResistanceTestInterval OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION "Battery resistance test interval.
+ Return value is XX representing XX weeks."
+ ::= { settings 59 }
+
+ loadShedTimeControl OBJECT-TYPE
+ SYNTAX INTEGER {
+ enabled(1),
+ disabled(2)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION "Load shed time control enabled/disabled status.
+ Return value: 1 = time control enabled, 2 = time control disabled."
+ ::= { settings 60 }
+
+ batteryFloatCurrent OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION "Battery float current.
+ Return value is XXX representing XXX amps."
+ ::= { settings 61 }
+
+-- *********************************************************************
+-- readOnlyObjects definition
+-- *********************************************************************
+
+ readOnlyObjects OBJECT IDENTIFIER ::= { dcSystem 2 }
+
+-- *********************************************************************
+-- readOnlyObjects.rectifiers definition
+-- *********************************************************************
+
+ rectifiers OBJECT IDENTIFIER ::= { readOnlyObjects 1 }
+
+ rectifierFloatVoltage OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Rectifier float voltage.
+ Return value is XXX representing XX.X volts. Valid ranges are 24.0 to 57.0 volts."
+ ::= { rectifiers 1 }
+
+ rectifierLoadCurrent OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Rectifier DC load current.
+ Return value is XXXX representing XXXX amps. Valid ranges are 0000 to 5000 amps."
+ ::= { rectifiers 2}
+
+-- *********************************************************************
+-- readOnlyObjects.batteries definition
+-- *********************************************************************
+
+ batteries OBJECT IDENTIFIER ::= { readOnlyObjects 2 }
+
+ batteryCurrent OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Battery current.
+ Return value is XXXX representing XXXX amps. Valid ranges are 0000 to 1000 amps."
+ ::= { batteries 1 }
+
+ batteryTemperature OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Battery temperature.
+ Return value is XX representing XX °C. Valid ranges are -40 to 99 °C."
+ ::= { batteries 2 }
+
+ batteryResistanceReference OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Initial battery resistance.
+ Return value is XXXXX representing X.XXXX ohms. Valid ranges are 0.0000 to 5.0000 ohms."
+ ::= { batteries 3 }
+
+ batteryResistanceReading OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Last battery resistance reading.
+ Return value is XXXXX representing X.XXXX ohms. Valid ranges are 0.0000 to 5.0000 ohms."
+ ::= { batteries 4 }
+
+ batteryResistanceChange OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Percent change from last battery resistance reading.
+ Return value is XXX representing XXX %. Valid ranges are 001 to 999 %."
+ ::= { batteries 5 }
+
+ batteryCycles1 OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Number of discharge/recharge cycles less than 1 minute.
+ Return value is XXX representing XXX cycles. Valid ranges are 000 to 255 cycles."
+ ::= { batteries 6 }
+
+ batteryCycles1to5 OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Number of discharge/recharge cycles from 1 to 5 minutes.
+ Return value is XXX representing XXX cycles. Valid ranges are 000 to 255 cycles."
+ ::= { batteries 7 }
+
+ batteryCycles5to15 OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Number of discharge/recharge cycles from 5 to 15 minutes.
+ Return value is XXX representing XXX cycles. Valid ranges are 000 to 255 cycles."
+ ::= { batteries 8 }
+
+ batteryCycles15 OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Number of discharge/recharge cycles greater than 15 minutes.
+ Return value is XXX representing XXX cycles. Valid ranges are 000 to 255 cycles."
+ ::= { batteries 9 }
+
+ batteryCycles15LastCycleDate OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Last cycle date of batteryCycles15.
+ Return value is MM-DD-YY, HH-MM."
+ ::= { batteries 10 }
+
+ batteryCycles15LastDuration OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Duration of batteryCycles15 last cycle.
+ Return value is XXXX representing XXXX minutes."
+ ::= { batteries 11 }
+
+ batteryTestFault OBJECT-TYPE
+ SYNTAX INTEGER {
+ abort1(1),
+ abort2(2),
+ abort3(3),
+ none(4)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Battery failure has occured during battery restistance test.
+ Return value: 1 = Abort 1, 2 = Abort 2, 3 = Abort 3, 4 = None."
+ ::= { batteries 12 }
+
+-- *********************************************************************
+-- readOnlyObjects.factorySettings definition
+-- *********************************************************************
+
+ factorySettings OBJECT IDENTIFIER ::= { readOnlyObjects 3 }
+
+ floatVoltagePresets OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Float voltage factory setting range.
+ Return value is XX.X volts min, XX.X volts max."
+ ::= { factorySettings 1 }
+
+ highVoltageAlarmPresets OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "High voltage alarm factory setting range.
+ Return value is XX.X volts min, XX.X volts max."
+ ::= { factorySettings 2 }
+
+ lowVoltageAlarmPresets OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Low voltage alarm factory setting range.
+ Return value is XX.X volts min, XX.X volts max."
+ ::= { factorySettings 3 }
+
+ disconnect1VoltagePresets OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Disconnect voltage 1 factory setting range.
+ Return value is XX.X volts min, XX.X volts max."
+ ::= { factorySettings 4 }
+
+ disconnect1TemperaturePreset OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Disconnect temperature 1 factory setting.
+ Return value is XX °C."
+ ::= { factorySettings 5 }
+
+ disconnect1LoadShedSundayPresets OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Disconnect 1 load shed Sunday time settings.
+ Return value is XX:Xx off, XX:XX on."
+ ::= { factorySettings 6 }
+
+ disconnect1LoadShedMondayPresets OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Disconnect 1 load shed Monday time settings.
+ Return value is XX:Xx off, XX:XX on."
+ ::= { factorySettings 7 }
+
+ disconnect1LoadShedTuesdayPresets OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Disconnect 1 load shed Tuesday time settings.
+ Return value is XX:Xx off, XX:XX on."
+ ::= { factorySettings 8 }
+
+ disconnect1LoadShedWednesdayPresets OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Disconnect 1 load shed Wednesday time settings.
+ Return value is XX:Xx off, XX:XX on."
+ ::= { factorySettings 9 }
+
+ disconnect1LoadShedThursdayPresets OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Disconnect 1 load shed Thursday time settings.
+ Return value is XX:Xx off, XX:XX on."
+ ::= { factorySettings 10 }
+
+ disconnect1LoadShedFridayPresets OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Disconnect 1 load shed Friday time settings.
+ Return value is XX:Xx off, XX:XX on."
+ ::= { factorySettings 11 }
+
+ disconnect1LoadShedSaturdayPresets OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Disconnect 1 load shed Saturday time settings.
+ Return value is XX:Xx off, XX:XX on."
+ ::= { factorySettings 12 }
+
+ reconnectVoltage1Presets OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Reconnect voltage 1 factory setting range.
+ Return value is XX.X volts min, XX.X volts max."
+ ::= { factorySettings 13 }
+
+ disconnect2VoltagePresets OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Disconnect voltage 2 factory setting range.
+ Return value is XX.X volts min, XX.X volts max."
+ ::= { factorySettings 14 }
+
+ disconnect2TemperaturePreset OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Disconnect temperature 2 factory setting.
+ Return value is XX °C."
+ ::= { factorySettings 15 }
+
+ disconnect2LoadShedSundayPresets OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Disconnect 2 load shed Sunday time settings.
+ Return value is XX:Xx off, XX:XX on."
+ ::= { factorySettings 16 }
+
+ disconnect2LoadShedMondayPresets OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Disconnect 2 load shed Monday time settings.
+ Return value is XX:Xx off, XX:XX on."
+ ::= { factorySettings 17 }
+
+ disconnect2LoadShedTuesdayPresets OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Disconnect 2 load shed Tuesday time settings.
+ Return value is XX:Xx off, XX:XX on."
+ ::= { factorySettings 18 }
+
+ disconnect2LoadShedWednesdayPresets OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Disconnect 2 load shed Wednesday time settings.
+ Return value is XX:Xx off, XX:XX on."
+ ::= { factorySettings 19 }
+
+ disconnect2LoadShedThursdayPresets OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Disconnect 2 load shed Thursday time settings.
+ Return value is XX:Xx off, XX:XX on."
+ ::= { factorySettings 20 }
+
+ disconnect2LoadShedFridayPresets OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Disconnect 2 load shed Friday time settings.
+ Return value is XX:Xx off, XX:XX on."
+ ::= { factorySettings 21 }
+
+ disconnect2LoadShedSaturdayPresets OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Disconnect 2 load shed Saturday time settings.
+ Return value is XX:Xx off, XX:XX on."
+ ::= { factorySettings 22 }
+
+ reconnect2VoltagePresets OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Reconnect voltage 2 factory setting range.
+ Return value is XX.X volts min, XX.X volts max."
+ ::= { factorySettings 23 }
+
+ disconnect3VoltagePresets OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Disconnect voltage 3 factory setting range.
+ Return value is XX.X volts min, XX.X volts max."
+ ::= { factorySettings 24 }
+
+ disconnect3TemperaturePreset OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Disconnect temperature 3 factory setting.
+ Return value is XX °C."
+ ::= { factorySettings 25 }
+
+ disconnect3LoadShedSundayPresets OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Disconnect 3 load shed Sunday time settings.
+ Return value is XX:Xx off, XX:XX on."
+ ::= { factorySettings 26 }
+
+ disconnect3LoadShedMondayPresets OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Disconnect 3 load shed Monday time settings.
+ Return value is XX:Xx off, XX:XX on."
+ ::= { factorySettings 27 }
+
+ disconnect3LoadShedTuesdayPresets OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Disconnect 3 load shed Tuesday time settings.
+ Return value is XX:Xx off, XX:XX on."
+ ::= { factorySettings 28 }
+
+ disconnect3LoadShedWednesdayPresets OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Disconnect 3 load shed Wednesday time settings.
+ Return value is XX:Xx off, XX:XX on."
+ ::= { factorySettings 29 }
+
+ disconnect3LoadShedThursdayPresets OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Disconnect 3 load shed Thursday time settings.
+ Return value is XX:Xx off, XX:XX on."
+ ::= { factorySettings 30 }
+
+ disconnect3LoadShedFridayPresets OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Disconnect 3 load shed Friday time settings.
+ Return value is XX:Xx off, XX:XX on."
+ ::= { factorySettings 31 }
+
+ disconnect3LoadShedSaturdayPresets OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Disconnect 3 load shed Saturday time settings.
+ Return value is XX:Xx off, XX:XX on."
+ ::= { factorySettings 32 }
+
+ reconnect3VoltagePresets OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Reconnect voltage 3 factory setting range.
+ Return value is XX.X volts min, XX.X volts max."
+ ::= { factorySettings 33 }
+
+ overloadCurrentPresets OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Overload current factory setting range.
+ Return value is XXXX amps min, XXXX amps max."
+ ::= { factorySettings 34 }
+
+ maximumCurrentPreset OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Maximum current factory setting.
+ Return value is XXXX amps."
+ ::= { factorySettings 35 }
+
+ batteryFloatCurrentPresets OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Battery float current factory settings.
+ Return value is XXX amps min, XXX amps max."
+ ::= { factorySettings 36 }
+
+ equalizeTimePresets OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Equalize time factory setting range.
+ Return value is 00.0 hours min, XX.X hours max."
+ ::= { factorySettings 37 }
+
+ equalizeVoltagePresets OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Equalize voltage factory setting range.
+ Return value is XX.X volts min, XX.X volts max."
+ ::= { factorySettings 38 }
+
+ batteryResistancePresets OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Battery resistance percent change factory setting range.
+ Return value is XXX % min, XXX % max."
+ ::= { factorySettings 39 }
+
+ batteryTestIntervalPresets OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Battery resistance test interval factory setting range.
+ Return value is XX weeks min, XX weeks max."
+ ::= { factorySettings 40 }
+
+-- *********************************************************************
+-- readOnlyObjects.alarmStatus definition
+-- *********************************************************************
+
+ alarmStatus OBJECT IDENTIFIER ::= { readOnlyObjects 4 }
+
+ highVoltageAlarmStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ inactive(1),
+ active(2)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "High voltage alarm status.
+ Return value 1 = alarm inactive, 2 = alarm active."
+ ::= { alarmStatus 1 }
+
+ lowVoltageAlarmStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ inactive(1),
+ active(2)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Low voltage alarm status.
+ Return value 1 = alarm inactive, 2 = alarm active."
+ ::= { alarmStatus 2 }
+
+ overloadAlarmStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ inactive(1),
+ active(2)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Overload alarm status.
+ Return value 1 = alarm inactive, 2 = alarm active."
+ ::= { alarmStatus 3 }
+
+ breakerAlarmStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ inactive(1),
+ active(2)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Breaker alarm status.
+ Return value 1 = alarm inactive, 2 = alarm active."
+ ::= { alarmStatus 4 }
+
+ acFailureAlarmStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ inactive(1),
+ active(2)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "AC failure alarm status.
+ Return value 1 = alarm inactive, 2 = alarm active."
+ ::= { alarmStatus 5 }
+
+ fanFailureAlarmStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ inactive(1),
+ active(2)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Fan failure alarm status.
+ Return value 1 = alarm inactive, 2 = alarm active."
+ ::= { alarmStatus 6 }
+
+ rectifierFailureAlarmStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ inactive(1),
+ active(2)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Rectifier failure alarm status.
+ Return value 1 = alarm inactive, 2 = alarm active."
+ ::= { alarmStatus 7 }
+
+ majorAlarmStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ inactive(1),
+ active(2)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Major alarm status.
+ Return value 1 = alarm inactive, 2 = alarm active."
+ ::= { alarmStatus 8 }
+
+ lowVoltageDisconnect1TemperatureAlarmStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ inactive(1),
+ active(2)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Low voltage disconnect 1 high temperature alarm status.
+ Return value 1 = alarm inactive, 2 = alarm active."
+ ::= { alarmStatus 9 }
+
+ lowVoltageDisconnect2TemperatureAlarmStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ inactive(1),
+ active(2)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Low voltage disconnect 2 high temperature alarm status.
+ Return value 1 = alarm inactive, 2 = alarm active."
+ ::= { alarmStatus 10 }
+
+ lowVoltageDisconnect3TemperatureAlarmStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ inactive(1),
+ active(2)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Low voltage disconnect 3 high temperature alarm status.
+ Return value 1 = alarm inactive, 2 = alarm active."
+ ::= { alarmStatus 11 }
+
+ lowVoltageDisconnect1VoltageAlarmStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ inactive(1),
+ active(2)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Low voltage disconnect 1 low voltage alarm status.
+ Return value 1 = alarm inactive, 2 = alarm active."
+ ::= { alarmStatus 12 }
+
+ lowVoltageDisconnect2VoltageAlarmStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ inactive(1),
+ active(2)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Low voltage disconnect 2 low voltage alarm status.
+ Return value 1 = alarm inactive, 2 = alarm active."
+ ::= { alarmStatus 13 }
+
+ lowVoltageDisconnect3VoltageAlarmStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ inactive(1),
+ active(2)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Low voltage disconnect 3 low voltage alarm status.
+ Return value 1 = alarm inactive, 2 = alarm active."
+ ::= { alarmStatus 14 }
+
+ batteryResistanceAlarmStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ inactive(1),
+ active(2)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Battery resistance alarm status.
+ Return value 1 = alarm inactive, 2 = alarm active."
+ ::= { alarmStatus 15 }
+
+ batteryCurrentAlarmStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ inactive(1),
+ active(2)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Battery resistance alarm status.
+ Return value 1 = alarm inactive, 2 = alarm active."
+ ::= { alarmStatus 16 }
+
+ batteryTestAbortCondition1AlarmStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ inactive(1),
+ active(2)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Battery test abort condition 1 alarm status.
+ Return value 1 = alarm inactive, 2 = alarm active."
+ ::= { alarmStatus 17 }
+
+ batteryTestAbortCondition2AlarmStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ inactive(1),
+ active(2)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Battery test abort condition 2 alarm status.
+ Return value 1 = alarm inactive, 2 = alarm active."
+ ::= { alarmStatus 18 }
+
+ batteryTestAbortCondition3AlarmStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ inactive(1),
+ active(2)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Battery test abort condition 3 alarm status.
+ Return value 1 = alarm inactive, 2 = alarm active."
+ ::= { alarmStatus 19 }
+
+ batteryDisconnectAlarmStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ inactive(1),
+ active(2)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Battery disconnect alarm status.
+ Return value 1 = alarm inactive, 2 = alarm active."
+ ::= { alarmStatus 20 }
+
+ fuseAlarmStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ inactive(1),
+ active(2)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Fuse alarm status.
+ Return value 1 = alarm inactive, 2 = alarm active."
+ ::= { alarmStatus 21 }
+
+-- *********************************************************************
+-- readOnlyObjects.digitalSensorAlarms definition
+-- *********************************************************************
+
+ digitalSensorAlarms OBJECT IDENTIFIER ::= { readOnlyObjects 5 }
+
+ breakerTrap TRAP-TYPE
+ ENTERPRISE ccpower
+ --#SEVERITY CRITICAL
+ DESCRIPTION "Breaker has tripped."
+ ::= 0
+
+ fuseTrap TRAP-TYPE
+ ENTERPRISE ccpower
+ --#SEVERITY CRITICAL
+ DESCRIPTION "Fuse has opened."
+ ::= 1
+
+ batteryDisconnectTrap TRAP-TYPE
+ ENTERPRISE ccpower
+ --#SEVERITY CRITICAL
+ DESCRIPTION "Battery disconnect has operated."
+ ::= 2
+
+ programmableTrap TRAP-TYPE
+ ENTERPRISE ccpower
+ DESCRIPTION "Programmable alarm has occurred."
+ --#SEVERITY CRITICAL
+ ::= 3
+
+-- *********************************************************************
+-- readOnlyObjects.SystemAlarms definition
+-- *********************************************************************
+
+ systemAlarms OBJECT IDENTIFIER ::= { readOnlyObjects 6 }
+
+ highVoltageTrap TRAP-TYPE
+ ENTERPRISE ccpower
+ DESCRIPTION "Float voltage has exceeded preset value.
+ Return value: High voltage alarm XX.X volts."
+ --#SEVERITY WARNING
+ ::= 4
+
+ lowVoltageTrap TRAP-TYPE
+ ENTERPRISE ccpower
+ DESCRIPTION "Float voltage is below preset value.
+ Return value: Low voltage alarm XX.X volts."
+ --#SEVERITY WARNING
+ ::= 5
+
+ loadOverCurrentTrap TRAP-TYPE
+ ENTERPRISE ccpower
+ DESCRIPTION "Load current has exceeded preset value.
+ Return value: Load over current alarm XXXX amps."
+ --#SEVERITY WARNING
+ ::= 6
+
+ batteryFloatCurrentTrap TRAP-TYPE
+ ENTERPRISE ccpower
+ DESCRIPTION "Battery float current has exceeded preset value.
+ Return value: Battery float current alarm XXXX amps."
+ --#SEVERITY CRITICAL
+ ::= 7
+
+ loadDisconnect1VoltageTrap TRAP-TYPE
+ ENTERPRISE ccpower
+ DESCRIPTION "Load disconnect 1 voltage has dropped below preset value.
+ Return value: Load disconnect 1 voltage XX.X volts."
+ --#SEVERITY CRITICAL
+ ::= 8
+
+ loadDisconnect2VoltageTrap TRAP-TYPE
+ ENTERPRISE ccpower
+ DESCRIPTION "Load disconnect 2 voltage has dropped below preset value.
+ Return value: Load disconnect 2 voltage XX.X volts."
+ --#SEVERITY CRITICAL
+ ::= 9
+
+ loadDisconnect3VoltageTrap TRAP-TYPE
+ ENTERPRISE ccpower
+ DESCRIPTION "Load disconnect 3 voltage has dropped below preset value.
+ Return value: Load disconnect 3 voltage XX.X volts."
+ --#SEVERITY CRITICAL
+ ::= 10
+
+ loadDisconnect1TemperatureTrap TRAP-TYPE
+ ENTERPRISE ccpower
+ DESCRIPTION "Load disconnect 1 temperature has exceeded preset value.
+ Return value: Load disconnect 1 temperature alarm XX °C."
+ --#SEVERITY CRITICAL
+ ::= 11
+
+ loadDisconnect2TemperatureTrap TRAP-TYPE
+ ENTERPRISE ccpower
+ DESCRIPTION "Load disconnect 2 temperature has exceeded preset value.
+ Return value: Load disconnect 2 temperature alarm XX °C."
+ --#SEVERITY CRITICAL
+ ::= 12
+
+ loadDisconnect3TemperatureTrap TRAP-TYPE
+ ENTERPRISE ccpower
+ DESCRIPTION "Load disconnect 3 temperature has exceeded preset value.
+ Return value: Load disconnect 3 temperature alarm XX °C."
+ --#SEVERITY CRITICAL
+ ::= 13
+
+ rectifierFailureTrap TRAP-TYPE
+ ENTERPRISE ccpower
+ DESCRIPTION "Rectifier failure.
+ Return value: Rectifier failure."
+ --#SEVERITY WARNING
+ ::= 14
+
+ fanFailureTrap TRAP-TYPE
+ ENTERPRISE ccpower
+ DESCRIPTION "Rectifier fan has failed.
+ Return value: Fan failure."
+ --#SEVERITY CRITICAL
+ ::= 15
+
+ acFailureTrap TRAP-TYPE
+ ENTERPRISE ccpower
+ DESCRIPTION "Rectifier has lost AC input power.
+ Return value: AC failure."
+ --#SEVERITY CRITICAL
+ ::= 16
+
+ majorFailureTrap TRAP-TYPE
+ ENTERPRISE ccpower
+ DESCRIPTION "Multiple failures of AC, rectififers, fans or a programmed alarm.
+ Return value: Multiple AC, fan, rectifier or optional alarm failures has occurred."
+ --#SEVERITY CRITICAL
+ ::= 17
+
+ batteryResistanceTrap TRAP-TYPE
+ ENTERPRISE ccpower
+ DESCRIPTION "Battery resistance has increased by a programmed percentage.
+ Return value: Battery resistance alarm X.XXXX ohms, XXX %."
+ --#SEVERITY WARNING
+ ::= 18
+
+ batteryTestAbort1Trap TRAP-TYPE
+ ENTERPRISE ccpower
+ DESCRIPTION "Battery failure abort 1 has occured during battery resistance test.
+ Return value: Battery test failure: Abort 1."
+ --#SEVERITY CRITICAL
+ ::= 19
+
+ batteryTestAbort2Trap TRAP-TYPE
+ ENTERPRISE ccpower
+ DESCRIPTION "Battery failure abort 2 has occured during battery resistance test.
+ Return value: Battery test failure: Abort 2."
+ --#SEVERITY CRITICAL
+ ::= 20
+
+ batteryTestAbort3Trap TRAP-TYPE
+ ENTERPRISE ccpower
+ DESCRIPTION "Battery failure abort 3 has occured during battery resistance test.
+ Return value: Battery test failure: Abort 3."
+ --#SEVERITY CRITICAL
+ ::= 21
+
+-- *********************************************************************
+-- readOnlyObjects.digitalSensorAlarmClears definition
+-- *********************************************************************
+
+ digitalSensorAlarmClears OBJECT IDENTIFIER ::= { readOnlyObjects 7 }
+
+ breakerTrapClear TRAP-TYPE
+ ENTERPRISE ccpower
+ DESCRIPTION "Breaker alarm has been cleared."
+ --#SEVERITY INFORMATIONAL
+ ::= 100
+
+ fuseTrapClear TRAP-TYPE
+ ENTERPRISE ccpower
+ DESCRIPTION "Fuse alarm has been cleared."
+ --#SEVERITY INFORMATIONAL
+ ::= 101
+
+ batteryDisconnectTrapClear TRAP-TYPE
+ ENTERPRISE ccpower
+ DESCRIPTION "Battery disconnect alarm has been cleared."
+ --#SEVERITY INFORMATIONAL
+ ::= 102
+
+ programmableTrapClear TRAP-TYPE
+ ENTERPRISE ccpower
+ DESCRIPTION "Programmable alarm has been cleared."
+ --#SEVERITY INFORMATIONAL
+ ::= 103
+
+-- *********************************************************************
+-- readOnlyObjects.SystemAlarmClears definition
+-- *********************************************************************
+
+ systemAlarmClears OBJECT IDENTIFIER ::= { readOnlyObjects 8 }
+
+ highVoltageTrapClear TRAP-TYPE
+ ENTERPRISE ccpower
+ DESCRIPTION "High voltage alarm has been cleared."
+ --#SEVERITY INFORMATIONAL
+ ::= 104
+
+ lowVoltageTrapClear TRAP-TYPE
+ ENTERPRISE ccpower
+ DESCRIPTION "Low voltage alarm has been cleared."
+ --#SEVERITY INFORMATIONAL
+ ::= 105
+
+ loadOverCurrentTrapClear TRAP-TYPE
+ ENTERPRISE ccpower
+ DESCRIPTION "Load over current alarm has been cleared."
+ --#SEVERITY INFORMATIONAL
+ ::= 106
+
+ batteryFloatCurrentTrapClear TRAP-TYPE
+ ENTERPRISE ccpower
+ DESCRIPTION "Battery float current alarm has been cleared."
+ --#SEVERITY INFORMATIONAL
+ ::= 107
+
+ loadDisconnect1VoltageTrapClear TRAP-TYPE
+ ENTERPRISE ccpower
+ DESCRIPTION "Load disconnect 1 voltage alarm has been cleared."
+ --#SEVERITY INFORMATIONAL
+ ::= 108
+
+ loadDisconnect2VoltageTrapClear TRAP-TYPE
+ ENTERPRISE ccpower
+ DESCRIPTION "Load disconnect 2 voltage alarm has been cleared."
+ --#SEVERITY INFORMATIONAL
+ ::= 109
+
+ loadDisconnect3VoltageTrapClear TRAP-TYPE
+ ENTERPRISE ccpower
+ DESCRIPTION "Load disconnect 3 voltage alarm has been cleared."
+ --#SEVERITY INFORMATIONAL
+ ::= 110
+
+ loadDisconnect1TemperatureTrapClear TRAP-TYPE
+ ENTERPRISE ccpower
+ DESCRIPTION "Load disconnect 1 temperature alarm has been cleared."
+ --#SEVERITY INFORMATIONAL
+ ::= 111
+
+ loadDisconnect2TemperatureTrapClear TRAP-TYPE
+ ENTERPRISE ccpower
+ DESCRIPTION "Load disconnect 2 temperature alarm has been cleared."
+ --#SEVERITY INFORMATIONAL
+ ::= 112
+
+ loadDisconnect3TemperatureTrapClear TRAP-TYPE
+ ENTERPRISE ccpower
+ DESCRIPTION "Load disconnect 3 temperature alarm has been cleared."
+ --#SEVERITY INFORMATIONAL
+ ::= 113
+
+ rectifierFailureTrapClear TRAP-TYPE
+ ENTERPRISE ccpower
+ DESCRIPTION "Rectififer failure alarm has been cleared."
+ --#SEVERITY INFORMATIONAL
+ ::= 114
+
+ fanFailureTrapClear TRAP-TYPE
+ ENTERPRISE ccpower
+ DESCRIPTION "Fan failure alarm has been cleared."
+ --#SEVERITY INFORMATIONAL
+ ::= 115
+
+ acFailureTrapClear TRAP-TYPE
+ ENTERPRISE ccpower
+ DESCRIPTION "AC failure alarm been cleared."
+ --#SEVERITY INFORMATIONAL
+ ::= 116
+
+ majorFailureTrapClear TRAP-TYPE
+ ENTERPRISE ccpower
+ DESCRIPTION "Major failure alarm has been cleared."
+ --#SEVERITY INFORMATIONAL
+ ::= 117
+
+ batteryResistanceTrapClear TRAP-TYPE
+ ENTERPRISE ccpower
+ DESCRIPTION "Battery resistance alarm has been cleared."
+ --#SEVERITY INFORMATIONAL
+ ::= 118
+
+ batteryTestAbort1TrapClear TRAP-TYPE
+ ENTERPRISE ccpower
+ DESCRIPTION "Battery test abort 1 alarm has been cleared."
+ --#SEVERITY INFORMATIONAL
+ ::= 119
+
+ batteryTestAbort2TrapClear TRAP-TYPE
+ ENTERPRISE ccpower
+ DESCRIPTION "Battery test abort 2 alarm has been cleared."
+ --#SEVERITY INFORMATIONAL
+ ::= 120
+
+ batteryTestAbort3TrapClear TRAP-TYPE
+ ENTERPRISE ccpower
+ DESCRIPTION "Battery test abort 3 alarm has been cleared."
+ --#SEVERITY INFORMATIONAL
+ ::= 121
+
+END
+
+
|