diff options
Diffstat (limited to 'MIBS/cambium/CAMBIUM-PTP670-MIB')
| -rwxr-xr-x | MIBS/cambium/CAMBIUM-PTP670-MIB | 7737 |
1 files changed, 7737 insertions, 0 deletions
diff --git a/MIBS/cambium/CAMBIUM-PTP670-MIB b/MIBS/cambium/CAMBIUM-PTP670-MIB new file mode 100755 index 0000000..6f0b662 --- /dev/null +++ b/MIBS/cambium/CAMBIUM-PTP670-MIB @@ -0,0 +1,7737 @@ + CAMBIUM-PTP670-MIB DEFINITIONS ::= BEGIN
+
+ IMPORTS
+ MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
+ Integer32, IpAddress, Counter64,
+ enterprises
+ FROM SNMPv2-SMI
+ MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
+ FROM SNMPv2-CONF
+ DisplayString
+ FROM SNMPv2-TC
+ InetAddress, InetAddressType
+ FROM INET-ADDRESS-MIB;
+
+ cambium MODULE-IDENTITY
+ LAST-UPDATED "201809042349Z"
+ ORGANIZATION "Cambium Networks Ltd."
+ CONTACT-INFO
+ "Post: Simon Whitaker
+ Cambium Networks Ltd.
+ Unit B2,
+ Linhay Business Park,
+ Eastern Road,
+ Ashburton,
+ Devon.
+ TQ13 7UP
+ United Kingdom
+ Phone: +44 (0) 1364 655 500
+ Email: simon.whitaker@cambiumnetworks.com"
+ DESCRIPTION
+ "MIB for non-line-of-sight (NLOS) wireless ethernet bridge."
+ REVISION "201809042349Z"
+ DESCRIPTION
+ "PTP670-02-65:
+ Added Secure License Signature Alarm.
+ Renamed ethernet statistics counters for clarity and added ethernet Tx counters.
+ Added erroredSeconds (ES), Severely Errored Seconds (SES) and unavailableSeconds (UAS) to the MIB."
+ REVISION "201805251814Z"
+ DESCRIPTION
+ "PTP670-02-60:
+ Added DNS feature support.
+ Added ethernet statistics configuration data.
+ Added syncE slave port and overwrite quality level.
+ Added counters for wireless packets transmitted and received.
+ Added installation mode setting.
+ Added SNTP SHA1 configuration support.
+ Added PCB temperature setting.
+ Removed Transparent Clock Source Port Alarm Trap."
+ REVISION "201711240919Z"
+ DESCRIPTION
+ "PTP670-02-55:
+ Added PCB temperature setting."
+ REVISION "201709061659Z"
+ DESCRIPTION
+ "PTP670-02-50:
+ Revision with HCMP topology support."
+ REVISION "201706151831Z"
+ DESCRIPTION
+ "PTP670-02-00:
+ Added encryption algorithms TLS-RSA, TLS-PSK 128 bit and TLS-PSK 256 bits.
+ Deprecated static AES 128-bit and AES 256-bit encryption algorithms.
+ Added Cambium Sync support."
+ REVISION "201702241159Z"
+ DESCRIPTION "PTP670-01-00: Initial revision."
+ ::= { enterprises 17713 }
+
+ -- Groups in cambium
+ ptp OBJECT IDENTIFIER ::= { cambium 1 }
+ ptmp OBJECT IDENTIFIER ::= { cambium 2 }
+ ptp670 OBJECT IDENTIFIER ::= { cambium 11 }
+
+ -- Groups in ptp670
+ dfs OBJECT IDENTIFIER ::= { ptp670 3 }
+ bridge OBJECT IDENTIFIER ::= { ptp670 4 }
+ configuration OBJECT IDENTIFIER ::= { ptp670 5 }
+ ethernet OBJECT IDENTIFIER ::= { ptp670 6 }
+ tDM OBJECT IDENTIFIER ::= { ptp670 7 }
+ license OBJECT IDENTIFIER ::= { ptp670 8 }
+ management OBJECT IDENTIFIER ::= { ptp670 9 }
+ phyControl OBJECT IDENTIFIER ::= { ptp670 10 }
+ phyStatus OBJECT IDENTIFIER ::= { ptp670 12 }
+ alarms OBJECT IDENTIFIER ::= { ptp670 13 }
+ apc OBJECT IDENTIFIER ::= { ptp670 14 }
+ smtp OBJECT IDENTIFIER ::= { ptp670 15 }
+ snmpControl OBJECT IDENTIFIER ::= { ptp670 16 }
+ sntp OBJECT IDENTIFIER ::= { ptp670 17 }
+ reset OBJECT IDENTIFIER ::= { ptp670 18 }
+ versions OBJECT IDENTIFIER ::= { ptp670 19 }
+ pubStats OBJECT IDENTIFIER ::= { ptp670 20 }
+ encryption OBJECT IDENTIFIER ::= { ptp670 22 }
+ tDDControl OBJECT IDENTIFIER ::= { ptp670 23 }
+ aAAControl OBJECT IDENTIFIER ::= { ptp670 25 }
+ syslogControl OBJECT IDENTIFIER ::= { ptp670 24 }
+ routerProtocols OBJECT IDENTIFIER ::= { ptp670 26 }
+ cableDiagnostics OBJECT IDENTIFIER ::= { ptp670 27 }
+ unitIdentification OBJECT IDENTIFIER ::= { ptp670 28 }
+ authorizationControl OBJECT IDENTIFIER ::= { ptp670 29 }
+ dNS OBJECT IDENTIFIER ::= { ptp670 30 }
+ supplementary OBJECT IDENTIFIER ::= { ptp670 96 }
+ ptpGroups OBJECT IDENTIFIER ::= { ptp670 98 }
+ ptpTraps OBJECT IDENTIFIER ::= { ptp670 99 }
+ ptpTrapPrefix OBJECT IDENTIFIER ::= { ptpTraps 0 }
+
+ -- Compliance information
+ --
+ ptpCompliance MODULE-COMPLIANCE
+ STATUS current
+ DESCRIPTION
+ "The compliance statement for the Cambium PTP MIB"
+ MODULE -- this module
+ MANDATORY-GROUPS { dfsGroup
+ , bridgeGroup
+ , configurationGroup
+ , ethernetGroup
+ , tDMGroup
+ , licenseGroup
+ , managementGroup
+ , phyControlGroup
+ , phyStatusGroup
+ , alarmsGroup
+ , apcGroup
+ , smtpGroup
+ , snmpControlGroup
+ , sntpGroup
+ , resetGroup
+ , versionsGroup
+ , pubStatsGroup
+ , encryptionGroup
+ , tDDControlGroup
+ , aAAControlGroup
+ , syslogControlGroup
+ , routerProtocolsGroup
+ , cableDiagnosticsGroup
+ , unitIdentificationGroup
+ , authorizationControlGroup
+ , dNSGroup
+ , supplementaryGroup
+ , notificationsGroup
+ }
+ ::= { ptp670 97 }
+
+ dfsGroup OBJECT-GROUP
+ OBJECTS { dfsTableNumber
+ , extendedSpectrumScanning
+ , dfsMeans
+ , dfsNineNinePointNinePercentiles
+ , dfsPeaks
+ }
+ STATUS current
+ DESCRIPTION "The dfs object group."
+ ::= { ptpGroups 3 }
+
+ bridgeGroup OBJECT-GROUP
+ OBJECTS { localPacketFiltering
+ , packetsToInternalStack
+ , packetsFromInternalStack
+ }
+ STATUS current
+ DESCRIPTION "The bridge object group."
+ ::= { ptpGroups 4 }
+
+ configurationGroup OBJECT-GROUP
+ OBJECTS { iPv4Address
+ , subnetMask
+ , gatewayIPAddress
+ , targetMACAddress
+ , masterSlaveMode
+ , maximumTransmitPower
+ , antennaGain
+ , cableLoss
+ , eIRP
+ , channelBandwidth
+ , linkName
+ , siteName
+ , accessMethod
+ , groupID
+ , iPv6Address
+ , iPVersion
+ , iPv6AutoConfiguredLinkLocalAddress
+ , iPv6PrefixLength
+ , iPv6GatewayAddress
+ , remoteInternetAddressTypeLinked
+ , remoteInternetAddressLinked
+ , subbandLowestFrequency
+ , subbandHighestFrequency
+ , enableTransmission
+ , antennaSelection
+ , transmitterChannels
+ , wirelessTopology
+ , configurationInstancedTableNumber
+ , unitName
+ , authorizationMethod
+ , remoteUnitNameLinked
+ , remoteInternetAddressType
+ , remoteInternetAddress
+ , remoteUnitName
+ }
+ STATUS current
+ DESCRIPTION "The configuration object group."
+ ::= { ptpGroups 5 }
+
+ ethernetGroup OBJECT-GROUP
+ OBJECTS { mainPSUPortAutoNegotiation
+ , mainPSUPortAutoNegAdvertisement
+ , mainPSUPortAutoMdix
+ , mainPSUPortStatus
+ , mainPSUPortSpeedAndDuplex
+ , dataPortWirelessDownAlert
+ , useVLANForManagementInterfaces
+ , vLANManagementPriority
+ , vLANManagementVID
+ , auxPortStatus
+ , auxPortSpeedAndDuplex
+ , ethernetPriorityTableNumber
+ , l2CPPriorityTableNumber
+ , iPDSCPPriorityTableNumber
+ , mPLSTCPriorityTableNumber
+ , managementPortWirelessDownAlert
+ , qOSPriorityScheme
+ , unknownNetworkPriorityQueueMapping
+ , dSCPManagementPriority
+ , dataBridgingStatusLinked
+ , mainPSUPortAllocation
+ , auxPortAllocation
+ , sFPPortAllocation
+ , dataPortPauseFrames
+ , sFPPortAutoNegotiation
+ , sFPPortAutoNegAdvertisement
+ , sFPPortAutoMdix
+ , sFPPortStatus
+ , sFPPortSpeedAndDuplex
+ , auxPortPowerOverEthernetOutput
+ , auxPortPowerOverEthernetOutputStatus
+ , syncETracking
+ , syncEEquipmentClock
+ , mainPSUPortQLRxOverwrite
+ , mainPSUPortSSMTx
+ , sFPPortSSMTx
+ , auxPortSSMTx
+ , syncETrackingState
+ , mainPSUPortQLRx
+ , auxPortQLRx
+ , sFPPortQLRx
+ , mainPSUPortQLTx
+ , auxPortQLTx
+ , sFPPortQLTx
+ , mainPSUPortSyncEMasterSlaveStatus
+ , auxPortSyncEMasterSlaveStatus
+ , sFPPortSyncEMasterSlaveStatus
+ , mainPSUPortGigabitMasterSlaveStatus
+ , auxPortGigabitMasterSlaveStatus
+ , sFPPortGigabitMasterSlaveStatus
+ , transparentClock
+ , transparentClockVLAN
+ , transparentClockVID
+ , mainPSUPortAcceptedQLRx
+ , auxPortAcceptedQLRx
+ , sFPPortAcceptedQLRx
+ , mainPSUPortSyncERxStatus
+ , auxPortSyncERxStatus
+ , sFPPortSyncERxStatus
+ , nIDULanPortStatus
+ , nIDULanPortSpeedAndDuplex
+ , oOBPriorityQueueMapping
+ , nIDULanPortAutoNegotiation
+ , nIDULanPortAutoNegAdvertisement
+ , nIDULanPortAutoMdix
+ , nIDULanPortGigabitMasterSlaveStatus
+ , txMABFrames
+ , managementNetworkAccessEnabled
+ , transparentClockPort
+ , syncESlavePort
+ , sFPPortQLRxOverwrite
+ , ethernetInstancedTableNumber
+ , ethernetStatisticsTableNumber
+ , ethernetPriorityQueueMapping
+ , l2CPPriorityQueueMapping
+ , iPDSCPPriorityQueueMapping
+ , mPLSTCPriorityQueueMapping
+ , dataBridgingStatus
+ , ethernetStatisticsDataSource
+ , ethernetStatisticsRxOctets
+ , ethernetStatisticsRxFrames
+ , ethernetStatisticsRxBroadcasts
+ , ethernetStatisticsRxFramesWithError
+ , ethernetStatisticsRxFramesUndersize
+ , ethernetStatisticsRxFramesOversize
+ , ethernetStatisticsTxOctets
+ , ethernetStatisticsTxFrames
+ , ethernetStatisticsTxBroadcasts
+ }
+ STATUS current
+ DESCRIPTION "The ethernet object group."
+ ::= { ptpGroups 6 }
+
+ tDMGroup OBJECT-GROUP
+ OBJECTS { tDMInterfaceControl
+ , tDMInterfaceStatus
+ , tDMEnabledChannels
+ , tdmTableNumber
+ , tDMConfigurationMismatch
+ , lowestTDMModulationMode
+ , tDMChannelStatus
+ , tDMChannelLineCode
+ , tDMChannelCableLength
+ , tDMChannelLoopback
+ }
+ STATUS current
+ DESCRIPTION "The tDM object group."
+ ::= { ptpGroups 7 }
+
+ licenseGroup OBJECT-GROUP
+ OBJECTS { regulatoryBand
+ , productVariant
+ , productName
+ , frequencyVariant
+ , sNMPv3Enable
+ , licenseVersion
+ , licenseUnitSerialNumber
+ , licenseIssueNumber
+ , licenseCountry
+ , licenseNumberOfRegulatoryBands
+ , licenseBandwidthCap
+ , licenseEncryption
+ , licenseSecurityLevel
+ , licenseGroupAccess
+ , licenseOOBManagementSupport
+ , licenseSFPPortSupport
+ , licenseAuxiliaryPortSupport
+ , licenseCapacity
+ , licenseMaxNumberOfTDMChannels
+ , licenseIEEE1588Support
+ , licenseSyncESupport
+ , licenseIPv6Support
+ , licenseMinimumFirmwareVersion
+ , licenseFullCapabilityTrialStatus
+ , licenseRemainingTrialPeriod
+ , licenseRemainingTrialPeriodAlarm
+ , capacityVariantMismatchLinked
+ , licenseTDDSyncSupport
+ , licenseMaxLinkRange
+ , licenseTrialPeriod
+ , licenseRARSupport
+ , licenseGasGroup
+ , licenseLongMinimumFirmwareVersion
+ , licenseHCMPSupport
+ , licenseInstancedTableNumber
+ , licenseTLSRekey
+ , licenseAdvanceHCMPSupport
+ , licenseMinFirmwareVersionPTP650Emulation
+ , capacityVariantMismatch
+ , licenseRegulatoryBandsList
+ }
+ STATUS current
+ DESCRIPTION "The license object group."
+ ::= { ptpGroups 8 }
+
+ managementGroup OBJECT-GROUP
+ OBJECTS { targetRange
+ , rangingMode
+ , installStatusLinked
+ , installArmState
+ , tFTPServerPortNumber
+ , tFTPSoftwareUpgradeFileName
+ , tFTPStartSoftwareUpgrade
+ , tFTPSoftwareUpgradeStatus
+ , tFTPSoftwareUpgradeStatusText
+ , tFTPSoftwareUpgradeStatusAdditionalText
+ , hTTPAccessEnabled
+ , telnetAccessEnabled
+ , hTTPPortNumber
+ , hTTPSPortNumber
+ , telnetPortNumber
+ , hTTPSAccessEnabled
+ , tFTPServerInternetAddressType
+ , tFTPServerInternetAddress
+ , lowestDataModulationMode
+ , tFTPClient
+ , mgmtInstancedTableNumber
+ , tFTPServerResolvedInternetAddress
+ , installationMode
+ , installStatus
+ }
+ STATUS current
+ DESCRIPTION "The management object group."
+ ::= { ptpGroups 9 }
+
+ phyControlGroup OBJECT-GROUP
+ OBJECTS { linkSymmetry
+ , userConfiguredMaxModulationMode
+ , linkModeOptimization
+ , txColorCode
+ , rxColorCode
+ , remoteMaximumTransmitPowerLinked
+ , phyControlInstancedTableNumber
+ , remoteMaximumTransmitPower
+ }
+ STATUS current
+ DESCRIPTION "The phyControl object group."
+ ::= { ptpGroups 10 }
+
+ phyStatusGroup OBJECT-GROUP
+ OBJECTS { linkLossLinked
+ , receivePowerLinked
+ , vectorErrorLinked
+ , transmitPowerLinked
+ , receiveChannel
+ , transmitChannel
+ , receiveFreqMHz
+ , transmitFreqMHz
+ , signalStrengthRatioLinked
+ , receiveFreqKHz
+ , transmitFreqKHz
+ , rawReceivePowerLinked
+ , rangeLinked
+ , receiveModulationModeLinked
+ , transmitModulationModeLinked
+ , searchStateLinked
+ , remoteMACAddressLinked
+ , phyInstancedStatusTableNumber
+ , tempPcb
+ , linkLoss
+ , receivePower
+ , vectorError
+ , signalStrengthRatio
+ , range
+ , receiveModulationMode
+ , transmitModulationMode
+ , searchState
+ , remoteMACAddress
+ , rawReceivePower
+ , transmitPower
+ }
+ STATUS current
+ DESCRIPTION "The phyStatus object group."
+ ::= { ptpGroups 12 }
+
+ alarmsGroup OBJECT-GROUP
+ OBJECTS { unitOutOfCalibration
+ , incompatibleRegulatoryBandsLinked
+ , noWirelessChannelAvailable
+ , wirelessLinkDisabledWarning
+ , mainPSUPortDisabledWarning
+ , sFPError
+ , mainPSUPortConfigurationMismatch
+ , incompatibleMasterAndSlaveLinked
+ , tDDSynchronizationStatus
+ , auxPortDisabledWarning
+ , tDDSynchronizationAlarm
+ , linkModeOptimizationMismatchLinked
+ , auxPortConfigurationMismatch
+ , secureModeAlarm
+ , dataBridgingStatusAlarmLinked
+ , sFPPortDisabledWarning
+ , sFPPortConfigurationMismatch
+ , maxLinkRangeExceededLinked
+ , nIDULanPortDisabledWarning
+ , nIDULanPortConfigurationMismatch
+ , portAllocationMismatchLinked
+ , transparentClockSourcePortAlarm
+ , alarmInstancedTableNumber
+ , secureLicenseSignatureAlarm
+ , incompatibleMasterAndSlave
+ , linkModeOptimizationMismatch
+ , dataBridgingStatusAlarm
+ , maxLinkRangeExceeded
+ , portAllocationMismatch
+ , wirelessLinkStatusAlarm
+ , incompatibleRegulatoryBands
+ }
+ STATUS current
+ DESCRIPTION "The alarms object group."
+ ::= { ptpGroups 13 }
+
+ apcGroup OBJECT-GROUP
+ OBJECTS { atpcHcmpMasterTargetRxPower
+ , atpcHcmpMasterTxPower
+ }
+ STATUS current
+ DESCRIPTION "The apc object group."
+ ::= { ptpGroups 14 }
+
+ smtpGroup OBJECT-GROUP
+ OBJECTS { sMTPEmailAlert
+ , sMTPServerPortNumber
+ , sMTPSourceEmailAddress
+ , sMTPDestinationEmailAddress
+ , sMTPEnabledMessages
+ , sMTPServerInternetAddressType
+ , sMTPServerInternetAddress
+ , sMTPServerResolvedInternetAddress
+ }
+ STATUS current
+ DESCRIPTION "The smtp object group."
+ ::= { ptpGroups 15 }
+
+ snmpControlGroup OBJECT-GROUP
+ OBJECTS { sNMPPortNumber
+ , sNMPCommunityString
+ , sNMPTrapTableNumber
+ , sNMPTrapVersion
+ , sNMPEnabledTraps
+ , enabledDiagnosticAlarms
+ , sNMPSendAllTrapsAtStartup
+ , sNMPTrapPortNumber
+ , sNMPTrapInternetAddressType
+ , sNMPTrapInternetAddress
+ , sNMPTrapReceiverEnabled
+ , sNMPTrapResolvedInternetAddress
+ }
+ STATUS current
+ DESCRIPTION "The snmpControl object group."
+ ::= { ptpGroups 16 }
+
+ sntpGroup OBJECT-GROUP
+ OBJECTS { sNTPState
+ , sNTPPollInterval
+ , sNTPSync
+ , sNTPLastSync
+ , systemClock
+ , timeZone
+ , daylightSaving
+ , sNTPPrimaryServer
+ , sNTPPrimaryServerDeadTime
+ , sNTPServerRetries
+ , sNTPServerTimeout
+ , sNTPServerTableNumber
+ , sNTPServerPortNumber
+ , sNTPServerStatus
+ , sNTPServerInternetAddressType
+ , sNTPServerInternetAddress
+ , sNTPServerResolvedInternetAddress
+ , sNTPServerAuthenticationProtocol
+ , sNTPServerKeyIdentifier
+ }
+ STATUS current
+ DESCRIPTION "The sntp object group."
+ ::= { ptpGroups 17 }
+
+ resetGroup OBJECT-GROUP
+ OBJECTS { systemReset
+ }
+ STATUS current
+ DESCRIPTION "The reset object group."
+ ::= { ptpGroups 18 }
+
+ versionsGroup OBJECT-GROUP
+ OBJECTS { softwareVersion
+ , hardwareVersion
+ , secondarySoftwareVersion
+ , bootVersion
+ }
+ STATUS current
+ DESCRIPTION "The versions object group."
+ ::= { ptpGroups 19 }
+
+ pubStatsGroup OBJECT-GROUP
+ OBJECTS { receiveDataRateLinked
+ , transmitDataRateLinked
+ , aggregateDataRateLinked
+ , wirelessLinkAvailabilityLinked
+ , wirelessLinkStatusLinked
+ , byteErrorRatioLinked
+ , receiveModulationModeDetailLinked
+ , dataBridgingAvailabilityLinked
+ , pubInstancedStatsTableNumber
+ , receiveDataRate
+ , transmitDataRate
+ , aggregateDataRate
+ , wirelessLinkAvailability
+ , wirelessLinkStatus
+ , receiveModulationModeDetail
+ , dataBridgingAvailability
+ , byteErrorRatio
+ , wirelessOutEthernetOctets
+ , wirelessOutAllOctets
+ , wirelessOutOctets
+ , erroredSeconds
+ , severelyErroredSeconds
+ , unavailableSeconds
+ }
+ STATUS current
+ DESCRIPTION "The pubStats object group."
+ ::= { ptpGroups 20 }
+
+ encryptionGroup OBJECT-GROUP
+ OBJECTS { encryptionAlgorithm
+ , tLSMinimumSecurityLevel
+ }
+ STATUS current
+ DESCRIPTION "The encryption object group."
+ ::= { ptpGroups 22 }
+
+ tDDControlGroup OBJECT-GROUP
+ OBJECTS { tDDSynchronizationMode
+ , hCMPMaximumLinkRange
+ , maximumNumberOfSlaves
+ , hCMPLinkSymmetry
+ }
+ STATUS current
+ DESCRIPTION "The tDDControl object group."
+ ::= { ptpGroups 23 }
+
+ aAAControlGroup OBJECT-GROUP
+ OBJECTS { userTableNumber
+ , userName
+ , userRole
+ , userEnabled
+ , userPassword
+ }
+ STATUS current
+ DESCRIPTION "The aAAControl object group."
+ ::= { ptpGroups 25 }
+
+ syslogControlGroup OBJECT-GROUP
+ OBJECTS { syslogClient
+ , syslogState
+ }
+ STATUS current
+ DESCRIPTION "The syslogControl object group."
+ ::= { ptpGroups 24 }
+
+ routerProtocolsGroup OBJECT-GROUP
+ OBJECTS { microwaveAdaptiveBandwidth
+ , mABNominalModulationMode
+ , mABTransmissionInterval
+ , mABHoldoffPeriod
+ , mABMaintenanceLevel
+ , useVLANForMABProtocol
+ , mABProtocolVID
+ , mABProtocolVLANPriority
+ , mABState
+ , mABNominalTransmitCapacity
+ , mABCurrentTransmitCapacity
+ }
+ STATUS current
+ DESCRIPTION "The routerProtocols object group."
+ ::= { ptpGroups 26 }
+
+ cableDiagnosticsGroup OBJECT-GROUP
+ OBJECTS { cableDiagnosticsPorts
+ , cableDiagnosticsControl
+ , cableDiagnosticsWarning
+ , cableDiagnosticsResultTableNumber
+ , cableDiagnosticsResultsDateTime
+ , cableDiagPair1Results
+ , cableDiagPair1Distance
+ , cableDiagPair2Results
+ , cableDiagPair2Distance
+ , cableDiagPair3Results
+ , cableDiagPair3Distance
+ , cableDiagPair4Results
+ , cableDiagPair4Distance
+ }
+ STATUS current
+ DESCRIPTION "The cableDiagnostics object group."
+ ::= { ptpGroups 27 }
+
+ unitIdentificationGroup OBJECT-GROUP
+ OBJECTS { deviceMACAddress
+ , deviceESN
+ , deviceMSN
+ }
+ STATUS current
+ DESCRIPTION "The unitIdentification object group."
+ ::= { ptpGroups 28 }
+
+ authorizationControlGroup OBJECT-GROUP
+ OBJECTS { authorizationControlTableNumber
+ , whitelistRMMacAddress
+ , whitelistRMEnabled
+ , blacklistRMMacAddress
+ , blacklistRMEnabled
+ }
+ STATUS current
+ DESCRIPTION "The authorizationControl object group."
+ ::= { ptpGroups 29 }
+
+ dNSGroup OBJECT-GROUP
+ OBJECTS { dNSResolver
+ , dNSPrimaryServer
+ , dNSServerTableNumber
+ , dNSServerInternetAddressType
+ , dNSServerInternetAddress
+ , dNSServerPortNumber
+ }
+ STATUS current
+ DESCRIPTION "The dNS object group."
+ ::= { ptpGroups 30 }
+
+ supplementaryGroup OBJECT-GROUP
+ OBJECTS { longitude
+ , latitude
+ , altitude
+ }
+ STATUS current
+ DESCRIPTION "The supplementary object group."
+ ::= { ptpGroups 96 }
+
+ notificationsGroup NOTIFICATION-GROUP
+ NOTIFICATIONS { channelChangeTrap
+ , dfsImpulsiveInterferenceTrap
+ , mainPSUPortStatusTrap
+ , mainPSUPortDisabledWarningTrap
+ , mainPSUPortConfigurationMismatchTrap
+ , auxPortStatusTrap
+ , auxPortDisabledWarningTrap
+ , regulatoryBandTrap
+ , installStatusTrap
+ , installArmStateTrap
+ , unitOutOfCalibrationTrap
+ , auxPortPowerOverEthernetOutputStatusTrap
+ , incompatibleRegulatoryBandsTrap
+ , noWirelessChannelAvailableTrap
+ , wirelessLinkDisabledWarningTrap
+ , auxPortConfigurationMismatchTrap
+ , sFPErrorTrap
+ , sFPPortStatusTrap
+ , incompatibleMasterAndSlaveTrap
+ , sNTPSyncTrap
+ , tDDSynchronizationAlarmTrap
+ , sFPPortDisabledWarningTrap
+ , sFPPortConfigurationMismatchTrap
+ , linkModeOptimizationMismatchTrap
+ , tDMInterfaceStatusTrap
+ , tDMChannelStatusTrap
+ , tDMChannelLoopbackTrap
+ , nIDULanPortStatusTrap
+ , syslogStateTrap
+ , syslogLocalNearlyFullTrap
+ , syslogLocalWrappedTrap
+ , syslogClientTrap
+ , secureModeAlarmTrap
+ , dataBridgingStatusAlarmTrap
+ , licenseRemainingTrialPeriodAlarmTrap
+ , capacityVariantMismatchTrap
+ , maxLinkRangeExceededTrap
+ , tDMConfigurationMismatchTrap
+ , nIDULanPortDisabledWarningTrap
+ , nIDULanPortConfigurationMismatchTrap
+ , portAllocationMismatchTrap
+ , wirelessLinkStatusAlarmTrap
+ , lbtDetectedTrap
+ , secureLicenseSignatureAlarmTrap
+ }
+ STATUS current
+ DESCRIPTION "The notifications group."
+ ::= { ptpGroups 99 }
+
+
+ DfsTableEntry ::=
+ SEQUENCE { dfsTableIndex INTEGER
+ , dfsMeans Integer32
+ , dfsNineNinePointNinePercentiles Integer32
+ , dfsPeaks Integer32
+ }
+
+ dfsTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF DfsTableEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ " A table storing a snapshot of various DFS measurements for each channel"
+ ::= { dfs 2 }
+
+ dfsTableEntry OBJECT-TYPE
+ SYNTAX DfsTableEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Table DfsTable"
+ INDEX { dfsTableIndex }
+ ::= { dfsTable 1 }
+
+ ConfigurationInstancedTableEntry ::=
+ SEQUENCE { configurationInstancedTableIndex INTEGER
+ , remoteInternetAddressType INTEGER
+ , remoteInternetAddress InetAddress
+ , remoteUnitName DisplayString
+ }
+
+ configurationInstancedTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF ConfigurationInstancedTableEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ " Instanced Public stats table."
+ ::= { configuration 33 }
+
+ configurationInstancedTableEntry OBJECT-TYPE
+ SYNTAX ConfigurationInstancedTableEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Table ConfigurationInstancedTable"
+ INDEX { configurationInstancedTableIndex }
+ ::= { configurationInstancedTable 1 }
+
+ EthernetPriorityTableEntry ::=
+ SEQUENCE { ethernetPriorityTableIndex INTEGER
+ , ethernetPriorityQueueMapping INTEGER
+ }
+
+ ethernetPriorityTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF EthernetPriorityTableEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ " A priority queue mapping table. This is a list of packet queues indexed by Ethernet priority."
+ ::= { ethernet 15 }
+
+ ethernetPriorityTableEntry OBJECT-TYPE
+ SYNTAX EthernetPriorityTableEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Table EthernetPriorityTable"
+ INDEX { ethernetPriorityTableIndex }
+ ::= { ethernetPriorityTable 1 }
+
+ L2CPPriorityTableEntry ::=
+ SEQUENCE { l2CPPriorityTableIndex INTEGER
+ , l2CPPriorityQueueMapping INTEGER
+ }
+
+ l2CPPriorityTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF L2CPPriorityTableEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ " A priority queue mapping table. This is a list of packet queues indexed by L2CP priority."
+ ::= { ethernet 17 }
+
+ l2CPPriorityTableEntry OBJECT-TYPE
+ SYNTAX L2CPPriorityTableEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Table L2CPPriorityTable"
+ INDEX { l2CPPriorityTableIndex }
+ ::= { l2CPPriorityTable 1 }
+
+ IPDSCPPriorityTableEntry ::=
+ SEQUENCE { iPDSCPPriorityTableIndex INTEGER
+ , iPDSCPPriorityQueueMapping INTEGER
+ }
+
+ iPDSCPPriorityTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF IPDSCPPriorityTableEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ " A priority queue mapping table. This is a list of packet queues indexed by L3 IP DSCP priority."
+ ::= { ethernet 19 }
+
+ iPDSCPPriorityTableEntry OBJECT-TYPE
+ SYNTAX IPDSCPPriorityTableEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Table IPDSCPPriorityTable"
+ INDEX { iPDSCPPriorityTableIndex }
+ ::= { iPDSCPPriorityTable 1 }
+
+ MPLSTCPriorityTableEntry ::=
+ SEQUENCE { mPLSTCPriorityTableIndex INTEGER
+ , mPLSTCPriorityQueueMapping INTEGER
+ }
+
+ mPLSTCPriorityTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF MPLSTCPriorityTableEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ " A priority queue mapping table. This is a list of priority queues indexed by MPLS TC priority."
+ ::= { ethernet 21 }
+
+ mPLSTCPriorityTableEntry OBJECT-TYPE
+ SYNTAX MPLSTCPriorityTableEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Table MPLSTCPriorityTable"
+ INDEX { mPLSTCPriorityTableIndex }
+ ::= { mPLSTCPriorityTable 1 }
+
+ EthernetInstancedTableEntry ::=
+ SEQUENCE { ethernetInstancedTableIndex INTEGER
+ , dataBridgingStatus INTEGER
+ }
+
+ ethernetInstancedTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF EthernetInstancedTableEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ " Instanced table showing the ethernet status"
+ ::= { ethernet 85 }
+
+ ethernetInstancedTableEntry OBJECT-TYPE
+ SYNTAX EthernetInstancedTableEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Table EthernetInstancedTable"
+ INDEX { ethernetInstancedTableIndex }
+ ::= { ethernetInstancedTable 1 }
+
+ EthernetStatisticsTableEntry ::=
+ SEQUENCE { ethernetStatisticsTableIndex INTEGER
+ , ethernetStatisticsDataSource OBJECT IDENTIFIER
+ , ethernetStatisticsRxOctets Counter64
+ , ethernetStatisticsRxFrames Counter64
+ , ethernetStatisticsRxBroadcasts Counter64
+ , ethernetStatisticsRxFramesWithError Counter64
+ , ethernetStatisticsRxFramesUndersize Counter64
+ , ethernetStatisticsRxFramesOversize Counter64
+ , ethernetStatisticsTxOctets Counter64
+ , ethernetStatisticsTxFrames Counter64
+ , ethernetStatisticsTxBroadcasts Counter64
+ }
+
+ ethernetStatisticsTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF EthernetStatisticsTableEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ " Instanced table showing the ethernet statistics"
+ ::= { ethernet 87 }
+
+ ethernetStatisticsTableEntry OBJECT-TYPE
+ SYNTAX EthernetStatisticsTableEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Table EthernetStatisticsTable"
+ INDEX { ethernetStatisticsTableIndex }
+ ::= { ethernetStatisticsTable 1 }
+
+ TdmTableEntry ::=
+ SEQUENCE { tdmTableIndex INTEGER
+ , tDMChannelStatus INTEGER
+ , tDMChannelLineCode INTEGER
+ , tDMChannelCableLength INTEGER
+ , tDMChannelLoopback INTEGER
+ }
+
+ tdmTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF TdmTableEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ " A table storing a configuration and status for each TDM channel"
+ ::= { tDM 5 }
+
+ tdmTableEntry OBJECT-TYPE
+ SYNTAX TdmTableEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Table TdmTable"
+ INDEX { tdmTableIndex }
+ ::= { tdmTable 1 }
+
+ LicenseInstancedTableEntry ::=
+ SEQUENCE { licenseInstancedTableIndex INTEGER
+ , capacityVariantMismatch INTEGER
+ }
+
+ licenseInstancedTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF LicenseInstancedTableEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ " Instanced license table"
+ ::= { license 45 }
+
+ licenseInstancedTableEntry OBJECT-TYPE
+ SYNTAX LicenseInstancedTableEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Table LicenseInstancedTable"
+ INDEX { licenseInstancedTableIndex }
+ ::= { licenseInstancedTable 1 }
+
+ LicenseRegulatoryBandsTableEntry ::=
+ SEQUENCE { licenseRegulatoryBandsTableIndex INTEGER
+ , licenseRegulatoryBandsList INTEGER
+ }
+
+ licenseRegulatoryBandsTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF LicenseRegulatoryBandsTableEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ ""
+ ::= { license 18 }
+
+ licenseRegulatoryBandsTableEntry OBJECT-TYPE
+ SYNTAX LicenseRegulatoryBandsTableEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Table LicenseRegulatoryBandsTable"
+ INDEX { licenseRegulatoryBandsTableIndex }
+ ::= { licenseRegulatoryBandsTable 1 }
+
+ MgmtInstancedTableEntry ::=
+ SEQUENCE { mgmtInstancedTableIndex INTEGER
+ , installStatus INTEGER
+ }
+
+ mgmtInstancedTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF MgmtInstancedTableEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ " Instanced management table."
+ ::= { management 24 }
+
+ mgmtInstancedTableEntry OBJECT-TYPE
+ SYNTAX MgmtInstancedTableEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Table MgmtInstancedTable"
+ INDEX { mgmtInstancedTableIndex }
+ ::= { mgmtInstancedTable 1 }
+
+ PhyControlInstancedTableEntry ::=
+ SEQUENCE { phyControlInstancedTableIndex INTEGER
+ , remoteMaximumTransmitPower INTEGER
+ }
+
+ phyControlInstancedTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF PhyControlInstancedTableEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ ""
+ ::= { phyControl 8 }
+
+ phyControlInstancedTableEntry OBJECT-TYPE
+ SYNTAX PhyControlInstancedTableEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Table PhyControlInstancedTable"
+ INDEX { phyControlInstancedTableIndex }
+ ::= { phyControlInstancedTable 1 }
+
+ PhyInstancedStatusTableEntry ::=
+ SEQUENCE { phyInstancedStatusTableIndex INTEGER
+ , linkLoss INTEGER
+ , receivePower Integer32
+ , vectorError Integer32
+ , signalStrengthRatio Integer32
+ , range Integer32
+ , receiveModulationMode INTEGER
+ , transmitModulationMode INTEGER
+ , searchState INTEGER
+ , remoteMACAddress OCTET STRING
+ , rawReceivePower Integer32
+ , transmitPower Integer32
+ }
+
+ phyInstancedStatusTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF PhyInstancedStatusTableEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ " Instanced PHY status table."
+ ::= { phyStatus 19 }
+
+ phyInstancedStatusTableEntry OBJECT-TYPE
+ SYNTAX PhyInstancedStatusTableEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Table PhyInstancedStatusTable"
+ INDEX { phyInstancedStatusTableIndex }
+ ::= { phyInstancedStatusTable 1 }
+
+ AlarmInstancedTableEntry ::=
+ SEQUENCE { alarmInstancedTableIndex INTEGER
+ , incompatibleMasterAndSlave INTEGER
+ , linkModeOptimizationMismatch INTEGER
+ , dataBridgingStatusAlarm INTEGER
+ , maxLinkRangeExceeded INTEGER
+ , portAllocationMismatch INTEGER
+ , wirelessLinkStatusAlarm INTEGER
+ , incompatibleRegulatoryBands INTEGER
+ }
+
+ alarmInstancedTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AlarmInstancedTableEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ " Instanced alarm table."
+ ::= { alarms 27 }
+
+ alarmInstancedTableEntry OBJECT-TYPE
+ SYNTAX AlarmInstancedTableEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Table AlarmInstancedTable"
+ INDEX { alarmInstancedTableIndex }
+ ::= { alarmInstancedTable 1 }
+
+ SNMPTrapTableEntry ::=
+ SEQUENCE { sNMPTrapTableIndex INTEGER
+ , sNMPTrapPortNumber INTEGER
+ , sNMPTrapInternetAddressType INTEGER
+ , sNMPTrapInternetAddress InetAddress
+ , sNMPTrapReceiverEnabled INTEGER
+ , sNMPTrapResolvedInternetAddress DisplayString
+ }
+
+ sNMPTrapTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF SNMPTrapTableEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ " SNMP trap configuration table."
+ ::= { snmpControl 4 }
+
+ sNMPTrapTableEntry OBJECT-TYPE
+ SYNTAX SNMPTrapTableEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Table SNMPTrapTable"
+ INDEX { sNMPTrapTableIndex }
+ ::= { sNMPTrapTable 1 }
+
+ SNTPServerTableEntry ::=
+ SEQUENCE { sNTPServerTableIndex INTEGER
+ , sNTPServerPortNumber INTEGER
+ , sNTPServerStatus DisplayString
+ , sNTPServerInternetAddressType INTEGER
+ , sNTPServerInternetAddress InetAddress
+ , sNTPServerResolvedInternetAddress DisplayString
+ , sNTPServerAuthenticationProtocol INTEGER
+ , sNTPServerKeyIdentifier Integer32
+ }
+
+ sNTPServerTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF SNTPServerTableEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ ""
+ ::= { sntp 15 }
+
+ sNTPServerTableEntry OBJECT-TYPE
+ SYNTAX SNTPServerTableEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Table SNTPServerTable"
+ INDEX { sNTPServerTableIndex }
+ ::= { sNTPServerTable 1 }
+
+ PubInstancedStatsTableEntry ::=
+ SEQUENCE { pubInstancedStatsTableIndex INTEGER
+ , receiveDataRate Integer32
+ , transmitDataRate Integer32
+ , aggregateDataRate Integer32
+ , wirelessLinkAvailability INTEGER
+ , wirelessLinkStatus INTEGER
+ , receiveModulationModeDetail INTEGER
+ , dataBridgingAvailability INTEGER
+ , byteErrorRatio Integer32
+ , wirelessOutEthernetOctets Counter64
+ , wirelessOutAllOctets Counter64
+ , wirelessOutOctets Counter64
+ , erroredSeconds Integer32
+ , severelyErroredSeconds Integer32
+ , unavailableSeconds Integer32
+ }
+
+ pubInstancedStatsTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF PubInstancedStatsTableEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ " Instanced Public stats table."
+ ::= { pubStats 10 }
+
+ pubInstancedStatsTableEntry OBJECT-TYPE
+ SYNTAX PubInstancedStatsTableEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Table PubInstancedStatsTable"
+ INDEX { pubInstancedStatsTableIndex }
+ ::= { pubInstancedStatsTable 1 }
+
+ UserTableEntry ::=
+ SEQUENCE { userTableIndex INTEGER
+ , userName DisplayString
+ , userRole INTEGER
+ , userEnabled INTEGER
+ , userPassword DisplayString
+ }
+
+ userTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF UserTableEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ " The User Table Control group contains objects specifically for user account management."
+ ::= { aAAControl 2 }
+
+ userTableEntry OBJECT-TYPE
+ SYNTAX UserTableEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Table UserTable"
+ INDEX { userTableIndex }
+ ::= { userTable 1 }
+
+ CableDiagnosticsResultTableEntry ::=
+ SEQUENCE { cableDiagnosticsResultTableIndex INTEGER
+ , cableDiagnosticsResultsDateTime Integer32
+ , cableDiagPair1Results INTEGER
+ , cableDiagPair1Distance Integer32
+ , cableDiagPair2Results INTEGER
+ , cableDiagPair2Distance Integer32
+ , cableDiagPair3Results INTEGER
+ , cableDiagPair3Distance Integer32
+ , cableDiagPair4Results INTEGER
+ , cableDiagPair4Distance Integer32
+ }
+
+ cableDiagnosticsResultTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF CableDiagnosticsResultTableEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ ""
+ ::= { cableDiagnostics 5 }
+
+ cableDiagnosticsResultTableEntry OBJECT-TYPE
+ SYNTAX CableDiagnosticsResultTableEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Table CableDiagnosticsResultTable"
+ INDEX { cableDiagnosticsResultTableIndex }
+ ::= { cableDiagnosticsResultTable 1 }
+
+ AuthorizationControlTableEntry ::=
+ SEQUENCE { authorizationControlTableIndex INTEGER
+ , whitelistRMMacAddress OCTET STRING
+ , whitelistRMEnabled INTEGER
+ , blacklistRMMacAddress OCTET STRING
+ , blacklistRMEnabled INTEGER
+ }
+
+ authorizationControlTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AuthorizationControlTableEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ " AuthorizationControlTable - used to validate an RM trying to connect to it."
+ ::= { authorizationControl 2 }
+
+ authorizationControlTableEntry OBJECT-TYPE
+ SYNTAX AuthorizationControlTableEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Table AuthorizationControlTable"
+ INDEX { authorizationControlTableIndex }
+ ::= { authorizationControlTable 1 }
+
+ DNSServerTableEntry ::=
+ SEQUENCE { dNSServerTableIndex INTEGER
+ , dNSServerInternetAddressType INTEGER
+ , dNSServerInternetAddress InetAddress
+ , dNSServerPortNumber INTEGER
+ }
+
+ dNSServerTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF DNSServerTableEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ ""
+ ::= { dNS 4 }
+
+ dNSServerTableEntry OBJECT-TYPE
+ SYNTAX DNSServerTableEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Table DNSServerTable"
+ INDEX { dNSServerTableIndex }
+ ::= { dNSServerTable 1 }
+
+ -- Dfs group attribute definitions
+ --
+ dfsTableNumber OBJECT-TYPE
+ SYNTAX INTEGER (1..305)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of entries in the dfsTable"
+ ::= { dfs 1 }
+
+ extendedSpectrumScanning OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Enables Extended Spectrum Scanning"
+ ::= { dfs 3 }
+
+ -- DfsTable group attribute definitions
+ --
+ dfsTableIndex OBJECT-TYPE
+ SYNTAX INTEGER (1..305)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "used to index values in the dfsTable."
+ ::= { dfsTableEntry 1 }
+
+ dfsMeans OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Snapshot of DFS means"
+ ::= { dfsTableEntry 2 }
+
+ dfsNineNinePointNinePercentiles OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Snapshot of DFS 99.9 percentiles"
+ ::= { dfsTableEntry 3 }
+
+ dfsPeaks OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Snapshot of DFS peaks"
+ ::= { dfsTableEntry 4 }
+
+ -- Bridge group attribute definitions
+ --
+ localPacketFiltering OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "When Local Packet Filtering is Enabled, the unit keeps
+ track of the port (Main, SFP, Aux or Wireless) on which a
+ packet with a given MAC source address destined to the
+ management agent has been received. This MAC address to
+ port mapping is then used in order to route any response
+ from the management agent to the right port. When Local
+ Packet Filtering is Disabled, any Ethernet packet from
+ the management agent is sent to all ports."
+ ::= { bridge 1 }
+
+ packetsToInternalStack OBJECT-TYPE
+ SYNTAX Counter64
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Total number of good packets the bridge has transmitted
+ to the internal TCP/IP stack."
+ ::= { bridge 2 }
+
+ packetsFromInternalStack OBJECT-TYPE
+ SYNTAX Counter64
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Total number of good packets the bridge has received
+ from the internal TCP/IP stack."
+ ::= { bridge 3 }
+
+ -- Configuration group attribute definitions
+ --
+ iPv4Address OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Internet protocol (IPv4) address. This address is used
+ by the family of Internet protocols to uniquely identify
+ the unit on a network."
+ ::= { configuration 1 }
+
+ subnetMask OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "A subnet allows the flow of network traffic between
+ hosts to be segregated based on a network configuration.
+ By organizing hosts into logical groups, subnetting can
+ improve network security and performance."
+ ::= { configuration 2 }
+
+ gatewayIPAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The IPv4 address of a device on the current network that
+ acts as an IPv4 network gateway. A gateway acts as an
+ entrance / exit to packets from / to other networks"
+ ::= { configuration 3 }
+
+ targetMACAddress OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(6))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "MAC address of the unit forming the other end of the
+ link"
+ ::= { configuration 4 }
+
+ masterSlaveMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ master(0),
+ slave(1)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The wireless link operates using a master and slave
+ relationship"
+ ::= { configuration 5 }
+
+ maximumTransmitPower OBJECT-TYPE
+ SYNTAX INTEGER (-15..30)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Maximum transmit power the wireless unit is permitted to
+ use when establishing and maintaining the wireless link.
+ This may be reduced during installation"
+ ::= { configuration 6 }
+
+ antennaGain OBJECT-TYPE
+ SYNTAX INTEGER (100..610)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Antenna Gain. Expressed in 10ths of dBi."
+ ::= { configuration 7 }
+
+ cableLoss OBJECT-TYPE
+ SYNTAX INTEGER (0..255)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Loss in the cable between the ODU and the antenna.
+ Expressed in 10ths of dB. NB: This attribute is ignored
+ for variants with an integral antenna."
+ ::= { configuration 8 }
+
+ eIRP OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Effective Isotropic Radiated Power (EIRP) describes the
+ strength of the radio signal leaving the wireless unit.
+ Expressed in 10ths of dBm"
+ ::= { configuration 9 }
+
+ channelBandwidth OBJECT-TYPE
+ SYNTAX INTEGER {
+ bw30MHz(0),
+ bw15MHz(1),
+ bw10MHz(2),
+ bw5MHz(3),
+ bw20MHz(4),
+ bw56MHz(5),
+ bw50MHz(6),
+ bw40MHz(7),
+ bw45MHz(8)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This control sets the bandwidth of the transmit and
+ receive radio channels"
+ ::= { configuration 11 }
+
+ linkName OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..63))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Name of the link allocated by the System Administrator.
+ Used to establish a connection with the correct wireless
+ unit at the other end of the link. NOTE: The link name
+ MUST be the same at both ends of the link."
+ ::= { configuration 14 }
+
+ siteName OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..63))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This field contains a user-provided description of the
+ site name together with any additional notes"
+ ::= { configuration 15 }
+
+ accessMethod OBJECT-TYPE
+ SYNTAX INTEGER {
+ linkAccess(0),
+ linkNameAccess(1),
+ groupAccess(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "ODUs must be configured in pairs before a link can be
+ established. The Access Method attribute determines how
+ the paired ODUs will recognise each other. For the Link
+ Access method, each ODU must be configured with Target
+ MAC Address equal to the MAC Address of the other unit.
+ For the Link Name Access method, both units must be
+ configured with the same Link Name. For the Group Access
+ method, both units must be configured with the same Group
+ ID."
+ ::= { configuration 16 }
+
+ groupID OBJECT-TYPE
+ SYNTAX INTEGER (0..255)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "When Access Method is set to Group Access, the Group ID
+ identifies all the units belonging to the same group"
+ ::= { configuration 17 }
+
+ iPv6Address OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..39))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Internet protocol (IPv6) address. This address is used
+ by the family of Internet protocols to uniquely identify
+ the unit on a network."
+ ::= { configuration 18 }
+
+ iPVersion OBJECT-TYPE
+ SYNTAX INTEGER {
+ iPv4(0),
+ iPv6(1),
+ dualIPv4andIPv6(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "IP protocol selection. Choice of IPv4, IPv6 or Dual."
+ ::= { configuration 20 }
+
+ iPv6AutoConfiguredLinkLocalAddress OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..39))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The auto configured link local IPv6 address"
+ ::= { configuration 21 }
+
+ iPv6PrefixLength OBJECT-TYPE
+ SYNTAX INTEGER (0..128)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "IPv6 prefix length"
+ ::= { configuration 22 }
+
+ iPv6GatewayAddress OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..39))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The IPv6 address of a device on the current network that
+ is currently acting as an IPv6 network gateway. A gateway
+ acts as an entrance / exit to packets from / to other
+ networks."
+ ::= { configuration 23 }
+
+ remoteInternetAddressTypeLinked OBJECT-TYPE
+ SYNTAX INTEGER {
+ unknown(0),
+ ipv4(1),
+ ipv6(2),
+ ipv4z(3),
+ ipv6z(4),
+ unknown6(5),
+ unknown7(6),
+ unknown8(7),
+ unknown9(8),
+ unknown10(9),
+ unknown11(10),
+ unknown12(11),
+ unknown13(12),
+ unknown14(13),
+ unknown15(14),
+ unknown16(15),
+ dns(16)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The type of Internet address specified by the associated
+ remoteInternetAddressType."
+ ::= { configuration 24 }
+
+ remoteInternetAddressLinked OBJECT-TYPE
+ SYNTAX InetAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "INET address used to identify the peer wireless unit"
+ ::= { configuration 25 }
+
+ subbandLowestFrequency OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Lowest center frequency of the subset of channels."
+ ::= { configuration 26 }
+
+ subbandHighestFrequency OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Highest center frequency of the subset of channels."
+ ::= { configuration 27 }
+
+ enableTransmission OBJECT-TYPE
+ SYNTAX INTEGER {
+ enabled(0),
+ muted(1)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Control for enabling/disabling the radio transmitter of
+ the Master. Note: Use Web Properties to control this
+ feature."
+ ::= { configuration 28 }
+
+ antennaSelection OBJECT-TYPE
+ SYNTAX INTEGER {
+ integrated(0),
+ connectorized(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Antenna Selection. Choice of Integrated or
+ Connectorized"
+ ::= { configuration 29 }
+
+ transmitterChannels OBJECT-TYPE
+ SYNTAX INTEGER {
+ handV(0),
+ hOnly(1),
+ vOnly(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "To select transmitter channel(s) (H,V)"
+ ::= { configuration 30 }
+
+ wirelessTopology OBJECT-TYPE
+ SYNTAX INTEGER {
+ pointToPoint(0),
+ highCapacityMultiPoint(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This attribute determines whether the device operates as
+ part of a PTP or an HCMP network topology."
+ ::= { configuration 31 }
+
+ configurationInstancedTableNumber OBJECT-TYPE
+ SYNTAX INTEGER (1..8)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of entries in the ConfigurationInstancedTable."
+ ::= { configuration 32 }
+
+ unitName OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..63))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This field contains user-provided name for this unit"
+ ::= { configuration 34 }
+
+ authorizationMethod OBJECT-TYPE
+ SYNTAX INTEGER {
+ whitelist(0),
+ blacklist(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Authorization Method to be used - Whitelist or
+ Blacklist"
+ ::= { configuration 35 }
+
+ remoteUnitNameLinked OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..63))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This field contains user-provided name of the peer
+ received over the wireless link"
+ ::= { configuration 36 }
+
+ -- ConfigurationInstancedTable group attribute definitions
+ --
+ configurationInstancedTableIndex OBJECT-TYPE
+ SYNTAX INTEGER (1..8)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Used to index the ConfigurationInstancedTable."
+ ::= { configurationInstancedTableEntry 1 }
+
+ remoteInternetAddressType OBJECT-TYPE
+ SYNTAX INTEGER {
+ unknown(0),
+ ipv4(1),
+ ipv6(2),
+ ipv4z(3),
+ ipv6z(4),
+ unknown6(5),
+ unknown7(6),
+ unknown8(7),
+ unknown9(8),
+ unknown10(9),
+ unknown11(10),
+ unknown12(11),
+ unknown13(12),
+ unknown14(13),
+ unknown15(14),
+ unknown16(15),
+ dns(16)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The type of Internet address specified by the associated
+ remoteInternetAddressType."
+ ::= { configurationInstancedTableEntry 2 }
+
+ remoteInternetAddress OBJECT-TYPE
+ SYNTAX InetAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "INET address used to identify the peer wireless unit"
+ ::= { configurationInstancedTableEntry 3 }
+
+ remoteUnitName OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..63))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This field contains user-provided name of the peer
+ received over the wireless link"
+ ::= { configurationInstancedTableEntry 4 }
+
+ -- Ethernet group attribute definitions
+ --
+ mainPSUPortAutoNegotiation OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This controls whether the local Ethernet interface
+ configuration is automatically negotiated or forced. Do
+ not use a forced setting together with auto negotiation
+ at the Ethernet link partner. If you want to run your
+ Ethernet link at a fixed speed and duplex then you would
+ normally leave auto negotiation enabled and only enable
+ the single Auto Neg Advertisement option that you want
+ the link to run in - FORCING ETHERNET CONFIGURATION IS A
+ LAST RESORT WHICH SHOULD ONLY BE PERFORMED IF YOU ARE
+ HAVING PROBLEMS WITH AUTO NEGOTIATION - AND YOU MUST
+ ENSURE THAT YOU CONFIGURE BOTH THIS UNIT AND THE ETHERNET
+ LINK PARTNER TO WHICH IT IS CONNECTED IDENTICALLY (THE
+ LINK PARTNER MUST NOT HAVE AUTO NEGOTIATION ENABLED
+ EITHER, OTHERWISE A DUPLEX MISMATCH WILL OCCUR). NB: The
+ new setting will only take effect after a system reboot."
+ ::= { ethernet 1 }
+
+ mainPSUPortAutoNegAdvertisement OBJECT-TYPE
+ SYNTAX BITS {
+ negInvalid(2),
+ neg10MbpsHalfDuplex(3),
+ neg10MbpsFullDuplex(4),
+ neg100MbpsHalfDuplex(5),
+ neg100MbpsFullDuplex(6),
+ neg1000MbpsFullDuplex(7)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This sets the different Ethernet configurations that
+ will be advertised during auto negotiation. Note the new
+ setting will only take effect after a system reboot.
+ WARNING: Duplex mismatch may result if both ends of the
+ Ethernet link do not have the same settings. Do not auto
+ negotiation together with a fixed setting at the Ethernet
+ link partner. WARNING: Make sure that you select
+ option(s) that you know your connected equipment can
+ cater for!"
+ ::= { ethernet 2 }
+
+ mainPSUPortAutoMdix OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This enables/disables the Auto MDI/MDIX capability. NB:
+ The new setting will only take effect after a system
+ reboot"
+ ::= { ethernet 3 }
+
+ mainPSUPortStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ down(0),
+ copperLinkUp(1),
+ fiberLinkUp(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Current status of the Main PSU Ethernet link. NB: a
+ change of state may generate an SNMP trap and/or SMTP
+ email alert"
+ ::= { ethernet 4 }
+
+ mainPSUPortSpeedAndDuplex OBJECT-TYPE
+ SYNTAX INTEGER {
+ speed1000MbpsFullDuplex(0),
+ speed100MbpsFullDuplex(1),
+ speed100MbpsHalfDuplex(2),
+ speed10MbpsFullDuplex(3),
+ speed10MbpsHalfDuplex(4),
+ speedUnknown6(5)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The current speed and duplex of the Main PSU Ethernet
+ link"
+ ::= { ethernet 5 }
+
+ dataPortWirelessDownAlert OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "When enabled, this causes the Ethernet link to be
+ dropped briefly when the wireless link drops. This is so
+ that spanning tree algorithms can quickly detect that
+ there is a problem."
+ ::= { ethernet 6 }
+
+ useVLANForManagementInterfaces OBJECT-TYPE
+ SYNTAX INTEGER {
+ noVLANTagging(0),
+ iEEE8021QTaggedCTagType8100(1),
+ iEEE8021adTaggedSTagorBTagType88a8(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This controls whether the management interfaces
+ (WWW/SNMP/SMTP/SNTP) use VLAN tags or not. NB: The new
+ setting will only take effect after a system reboot"
+ ::= { ethernet 7 }
+
+ vLANManagementPriority OBJECT-TYPE
+ SYNTAX INTEGER {
+ p0(0),
+ p1(1),
+ p2(2),
+ p3(3),
+ p4(4),
+ p5(5),
+ p6(6),
+ p7(7)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This VLAN Priority (0-7) will be included in packets
+ generated by the management interfaces"
+ ::= { ethernet 8 }
+
+ vLANManagementVID OBJECT-TYPE
+ SYNTAX INTEGER (0..4094)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This VLAN VID (0-4094) will be included in packets
+ generated by the management interfaces. Note the new
+ setting will only take effect after a system reboot"
+ ::= { ethernet 11 }
+
+ auxPortStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ down(0),
+ copperLinkUp(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Current status of the Aux Ethernet link. NB: a change of
+ state may generate an SNMP trap and/or SMTP email alert"
+ ::= { ethernet 12 }
+
+ auxPortSpeedAndDuplex OBJECT-TYPE
+ SYNTAX INTEGER {
+ speed1000MbpsFullDuplex(0),
+ speed100MbpsFullDuplex(1),
+ speed100MbpsHalfDuplex(2),
+ speed10MbpsFullDuplex(3),
+ speed10MbpsHalfDuplex(4),
+ speedUnknown6(5)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The current speed and duplex of the Aux Ethernet link"
+ ::= { ethernet 13 }
+
+ ethernetPriorityTableNumber OBJECT-TYPE
+ SYNTAX INTEGER (9)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of entries in the vLANPriorityTable."
+ ::= { ethernet 14 }
+
+ l2CPPriorityTableNumber OBJECT-TYPE
+ SYNTAX INTEGER (5)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of entries in the l2CPPriorityTable."
+ ::= { ethernet 16 }
+
+ iPDSCPPriorityTableNumber OBJECT-TYPE
+ SYNTAX INTEGER (64)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of entries in the iPDSCPPriorityTable."
+ ::= { ethernet 18 }
+
+ mPLSTCPriorityTableNumber OBJECT-TYPE
+ SYNTAX INTEGER (8)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of entries in the mPLSTCPriorityTable."
+ ::= { ethernet 20 }
+
+ managementPortWirelessDownAlert OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "When enabled, this causes the management link to be
+ dropped briefly when the wireless link drops. This is so
+ that spanning tree algorithms can quickly detect that
+ there is a problem."
+ ::= { ethernet 23 }
+
+ qOSPriorityScheme OBJECT-TYPE
+ SYNTAX INTEGER {
+ ethernet(0),
+ iPMPLS(1)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Selects classification based on fields in the Ethernet
+ header (Layer 2) or in the Network header (Layer 3). The
+ unit recognises two network layer protocols: IP and MPLS"
+ ::= { ethernet 24 }
+
+ unknownNetworkPriorityQueueMapping OBJECT-TYPE
+ SYNTAX INTEGER {
+ q0(0),
+ q1(1),
+ q2(2),
+ q3(3),
+ q4(4),
+ q5(5),
+ q6(6),
+ q7(7)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Configures the classification of unknown network
+ protocols to an egress queue at the wireless port.
+ Unknown means something other than IP and MPLS"
+ ::= { ethernet 25 }
+
+ dSCPManagementPriority OBJECT-TYPE
+ SYNTAX INTEGER (0..63)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This Differentiated Services Code Point value will be
+ inserted in the IP Header of all IP Datagrams transmitted
+ by the management interfaces"
+ ::= { ethernet 26 }
+
+ dataBridgingStatusLinked OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Current status of Ethernet Data traffic bridging over
+ the wireless link"
+ ::= { ethernet 27 }
+
+ mainPSUPortAllocation OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ dataOnly(1),
+ dataandInBandManagement(2),
+ outofBandLocalManagement(3),
+ outofBandRemoteManagement(4)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates the service or services supported by the Main
+ PSU Ethernet port"
+ ::= { ethernet 28 }
+
+ auxPortAllocation OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ dataOnly(1),
+ dataandInBandManagement(2),
+ outofBandLocalManagement(3),
+ outofBandRemoteManagement(4)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates the service or services supported by the Aux
+ Ethernet port"
+ ::= { ethernet 29 }
+
+ sFPPortAllocation OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ dataOnly(1),
+ dataandInBandManagement(2),
+ outofBandLocalManagement(3),
+ outofBandRemoteManagement(4)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates the service or services supported by the SFP
+ Ethernet port"
+ ::= { ethernet 30 }
+
+ dataPortPauseFrames OBJECT-TYPE
+ SYNTAX INTEGER {
+ tunnel(0),
+ discard(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Controls whether the bridge tunnels or discards Layer 2
+ PAUSE frames arriving at the Data Port. Such frames are
+ identified by the destination MAC Address being equal to
+ 01-80-C2-00-00-01"
+ ::= { ethernet 31 }
+
+ sFPPortAutoNegotiation OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This controls whether the local SFP Ethernet interface
+ configuration is automatically negotiated or forced. Do
+ not use a forced setting together with auto negotiation
+ at the Ethernet link partner. If you want to run your
+ Ethernet link at a fixed speed and duplex then you would
+ normally leave auto negotiation enabled and only enable
+ the single Auto Neg Advertisement option that you want
+ the link to run in - FORCING ETHERNET CONFIGURATION IS A
+ LAST RESORT WHICH SHOULD ONLY BE PERFORMED IF YOU ARE
+ HAVING PROBLEMS WITH AUTO NEGOTIATION - AND YOU MUST
+ ENSURE THAT YOU CONFIGURE BOTH THIS UNIT AND THE ETHERNET
+ LINK PARTNER TO WHICH IT IS CONNECTED IDENTICALLY (THE
+ LINK PARTNER MUST NOT HAVE AUTO NEGOTIATION ENABLED
+ EITHER, OTHERWISE A DUPLEX MISMATCH WILL OCCUR). NB: The
+ new setting will only take effect after a system reboot."
+ ::= { ethernet 32 }
+
+ sFPPortAutoNegAdvertisement OBJECT-TYPE
+ SYNTAX BITS {
+ negInvalid(2),
+ neg10MbpsHalfDuplex(3),
+ neg10MbpsFullDuplex(4),
+ neg100MbpsHalfDuplex(5),
+ neg100MbpsFullDuplex(6),
+ neg1000MbpsFullDuplex(7)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This sets the different SFP Ethernet configurations that
+ will be advertised during auto negotiation. Note the new
+ setting will only take effect after a system reboot.
+ WARNING: Duplex mismatch may result if both ends of the
+ Ethernet link do not have the same settings. Do not auto
+ negotiation together with a fixed setting at the Ethernet
+ link partner. WARNING: Make sure that you select
+ option(s) that you know your connected equipment can
+ cater for!"
+ ::= { ethernet 33 }
+
+ sFPPortAutoMdix OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This enables/disables the Auto MDI/MDIX capability. NB:
+ The new setting will only take effect after a system
+ reboot"
+ ::= { ethernet 34 }
+
+ sFPPortStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ down(0),
+ copperLinkUp(1),
+ fiberLinkUp(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Current status of the SFP Ethernet link. NB: a change of
+ state may generate an SNMP trap and/or SMTP email alert"
+ ::= { ethernet 35 }
+
+ sFPPortSpeedAndDuplex OBJECT-TYPE
+ SYNTAX INTEGER {
+ speed1000MbpsFullDuplex(0),
+ speed100MbpsFullDuplex(1),
+ speed100MbpsHalfDuplex(2),
+ speed10MbpsFullDuplex(3),
+ speed10MbpsHalfDuplex(4),
+ speedUnknown6(5)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The current speed and duplex of the SFP Ethernet link"
+ ::= { ethernet 36 }
+
+ auxPortPowerOverEthernetOutput OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The state of the Power Over Ethernet (PoE) output of the
+ Aux port. Enabling PoE output may lead to system
+ instability; please refer to the User Guide before
+ enabling this control"
+ ::= { ethernet 37 }
+
+ auxPortPowerOverEthernetOutputStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ poEOutputOn(0),
+ poEOutputDisabled(1),
+ poEOutputEnabledbutNotActiveErrororNoLoadPresent(2),
+ poEOutputOverloadError(3),
+ poEOutputOverTempError(4),
+ poEOutputErrorDetected(5)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Current status of the Power Over Ethernet (PoE) output
+ of the Aux port"
+ ::= { ethernet 38 }
+
+ syncETracking OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1),
+ internalTDMUseOnly(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Controls whether Synchronous Ethernet (SyncE) network
+ synchronization is enabled."
+ ::= { ethernet 39 }
+
+ syncEEquipmentClock OBJECT-TYPE
+ SYNTAX INTEGER {
+ eECOption1(0),
+ eECOption2(1)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "EEC-Option 1 applies to synchronous Ethernet equipments
+ that are designed to interwork with networks optimized
+ for the 2048-kbit/s hierarchy. Corresponds to ITU-T G.813
+ Option 1; EEC-Option 2 applies to synchronous Ethernet
+ equipments that are designed to interwork with networks
+ optimized for the 1544-kbit/s hierarchy. Corresponds to
+ Type IV clock from ITU-T G.812."
+ ::= { ethernet 40 }
+
+ mainPSUPortQLRxOverwrite OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ qLPRS(1),
+ qLSTU(2),
+ qLPRC(3),
+ qLST2(4),
+ qLSSUAQLTNC(5),
+ qLSSUB(6),
+ qLST3E(7),
+ qLEEC2QLST3(8),
+ qLEEC1QLSEC(9),
+ qLSMC(10),
+ qLPROV(11),
+ qLDNUQLDUS(12)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Override for the Synchronous Ethernet (SyncE) received
+ Quality Level (QL) on the main PSU port."
+ ::= { ethernet 41 }
+
+ mainPSUPortSSMTx OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Controls whether the Synchronous Ethernet (SyncE)
+ Quality Level (QL) is transmitted on the Main PSU port"
+ ::= { ethernet 42 }
+
+ sFPPortSSMTx OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Controls whether the Synchronous Ethernet (SyncE)
+ Quality Level (QL) is transmitted on the SFP port"
+ ::= { ethernet 43 }
+
+ auxPortSSMTx OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Controls whether the Synchronous Ethernet (SyncE)
+ Quality Level (QL) is transmitted on the Aux port"
+ ::= { ethernet 44 }
+
+ syncETrackingState OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ acquiringWirelessLock(1),
+ freeRunning(2),
+ lockedLocalAcquiringHoldover(3),
+ lockedLocalHoldoverAcquired(4),
+ holdover(5),
+ lockedRemoteAcquiringHoldover(6),
+ lockedRemoteHoldoverAcquired(7)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The current state of Synchronous Ethernet (SyncE)
+ network synchronization."
+ ::= { ethernet 45 }
+
+ mainPSUPortQLRx OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(0),
+ qLPRS(1),
+ qLSTU(2),
+ qLPRC(3),
+ qLST2(4),
+ qLSSUAQLTNC(5),
+ qLSSUB(6),
+ qLST3E(7),
+ qLEEC2QLST3(8),
+ qLEEC1QLSEC(9),
+ qLSMC(10),
+ qLPROV(11),
+ qLDNUQLDUS(12),
+ qLFAILED(13)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Synchronous Ethernet (SyncE) Quality Level (QL)
+ currently being received on the main PSU port."
+ ::= { ethernet 46 }
+
+ auxPortQLRx OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(0),
+ qLPRS(1),
+ qLSTU(2),
+ qLPRC(3),
+ qLST2(4),
+ qLSSUAQLTNC(5),
+ qLSSUB(6),
+ qLST3E(7),
+ qLEEC2QLST3(8),
+ qLEEC1QLSEC(9),
+ qLSMC(10),
+ qLPROV(11),
+ qLDNUQLDUS(12),
+ qLFAILED(13)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Synchronous Ethernet (SyncE) Quality Level (QL)
+ currently being received on the auxiliary port."
+ ::= { ethernet 47 }
+
+ sFPPortQLRx OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(0),
+ qLPRS(1),
+ qLSTU(2),
+ qLPRC(3),
+ qLST2(4),
+ qLSSUAQLTNC(5),
+ qLSSUB(6),
+ qLST3E(7),
+ qLEEC2QLST3(8),
+ qLEEC1QLSEC(9),
+ qLSMC(10),
+ qLPROV(11),
+ qLDNUQLDUS(12),
+ qLFAILED(13)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Synchronous Ethernet (SyncE) Quality Level (QL)
+ currently being received on the SFP port."
+ ::= { ethernet 48 }
+
+ mainPSUPortQLTx OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(0),
+ qLPRS(1),
+ qLSTU(2),
+ qLPRC(3),
+ qLST2(4),
+ qLSSUAQLTNC(5),
+ qLSSUB(6),
+ qLST3E(7),
+ qLEEC2QLST3(8),
+ qLEEC1QLSEC(9),
+ qLSMC(10),
+ qLPROV(11),
+ qLDNUQLDUS(12)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Synchronous Ethernet (SyncE) transmit Quality Level
+ (QL) of the main PSU port."
+ ::= { ethernet 49 }
+
+ auxPortQLTx OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(0),
+ qLPRS(1),
+ qLSTU(2),
+ qLPRC(3),
+ qLST2(4),
+ qLSSUAQLTNC(5),
+ qLSSUB(6),
+ qLST3E(7),
+ qLEEC2QLST3(8),
+ qLEEC1QLSEC(9),
+ qLSMC(10),
+ qLPROV(11),
+ qLDNUQLDUS(12)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Synchronous Ethernet (SyncE) transmit Quality Level
+ (QL) of the auxiliary port."
+ ::= { ethernet 50 }
+
+ sFPPortQLTx OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(0),
+ qLPRS(1),
+ qLSTU(2),
+ qLPRC(3),
+ qLST2(4),
+ qLSSUAQLTNC(5),
+ qLSSUB(6),
+ qLST3E(7),
+ qLEEC2QLST3(8),
+ qLEEC1QLSEC(9),
+ qLSMC(10),
+ qLPROV(11),
+ qLDNUQLDUS(12)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Synchronous Ethernet (SyncE) transmit Quality Level
+ (QL) of the SFP port."
+ ::= { ethernet 51 }
+
+ mainPSUPortSyncEMasterSlaveStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ master(0),
+ slave(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The main PSU port Synchronous Ethernet (SyncE)
+ Master/Slave status"
+ ::= { ethernet 52 }
+
+ auxPortSyncEMasterSlaveStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ master(0),
+ slave(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The auxiliary port Synchronous Ethernet (SyncE)
+ Master/Slave status"
+ ::= { ethernet 53 }
+
+ sFPPortSyncEMasterSlaveStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ master(0),
+ slave(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The SFP port Synchronous Ethernet (SyncE) Master/Slave
+ status"
+ ::= { ethernet 54 }
+
+ mainPSUPortGigabitMasterSlaveStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ master(0),
+ slave(1),
+ notApplicable(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The main PSU port Gigabit Ethernet Master/Slave status"
+ ::= { ethernet 55 }
+
+ auxPortGigabitMasterSlaveStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ master(0),
+ slave(1),
+ notApplicable(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The auxiliary port Gigabit Ethernet Master/Slave status"
+ ::= { ethernet 56 }
+
+ sFPPortGigabitMasterSlaveStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ master(0),
+ slave(1),
+ notApplicable(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The SFP port Gigabit Ethernet Master/Slave status"
+ ::= { ethernet 57 }
+
+ transparentClock OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This control enables the Precision Time Protocol
+ (IEEE-1588) Transparent Clock. Once enabled the unit will
+ modify the correction field in PTP event messages to take
+ account of the time these frames have been resident in
+ this system. This will happen for all PTP frames at Layer
+ 2 & Layer 3 (IPv4 & IPv6) unless a transparent clock VLAN
+ is enabled."
+ ::= { ethernet 58 }
+
+ transparentClockVLAN OBJECT-TYPE
+ SYNTAX INTEGER {
+ all(0),
+ sTagged(1),
+ cTagged(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "If All is selected then all PTP frames will have their
+ correction fields modified with the residence time. If an
+ S-TAG or C-TAG is selected, only frames with this VLAN
+ tag and matching the VLAN ID in the Transparent Clock VID
+ will have their correction fields modified."
+ ::= { ethernet 59 }
+
+ transparentClockVID OBJECT-TYPE
+ SYNTAX INTEGER (0..4094)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The VLAN ID which frames must match if they are to be
+ corrected. Only valid when an S-TAG or C-TAG has been
+ selected."
+ ::= { ethernet 60 }
+
+ mainPSUPortAcceptedQLRx OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(0),
+ qLPRS(1),
+ qLSTU(2),
+ qLPRC(3),
+ qLST2(4),
+ qLSSUAQLTNC(5),
+ qLSSUB(6),
+ qLST3E(7),
+ qLEEC2QLST3(8),
+ qLEEC1QLSEC(9),
+ qLSMC(10),
+ qLPROV(11),
+ qLDNUQLDUS(12),
+ qLFAILED(13)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Synchronous Ethernet (SyncE) Quality Level (QL)
+ currently accepted (validated) on the main PSU port."
+ ::= { ethernet 61 }
+
+ auxPortAcceptedQLRx OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(0),
+ qLPRS(1),
+ qLSTU(2),
+ qLPRC(3),
+ qLST2(4),
+ qLSSUAQLTNC(5),
+ qLSSUB(6),
+ qLST3E(7),
+ qLEEC2QLST3(8),
+ qLEEC1QLSEC(9),
+ qLSMC(10),
+ qLPROV(11),
+ qLDNUQLDUS(12),
+ qLFAILED(13)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Synchronous Ethernet (SyncE) Quality Level (QL)
+ currently accepted (validated) on the auxiliary port."
+ ::= { ethernet 62 }
+
+ sFPPortAcceptedQLRx OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(0),
+ qLPRS(1),
+ qLSTU(2),
+ qLPRC(3),
+ qLST2(4),
+ qLSSUAQLTNC(5),
+ qLSSUB(6),
+ qLST3E(7),
+ qLEEC2QLST3(8),
+ qLEEC1QLSEC(9),
+ qLSMC(10),
+ qLPROV(11),
+ qLDNUQLDUS(12),
+ qLFAILED(13)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Synchronous Ethernet (SyncE) Quality Level (QL)
+ currently accepted (validated) on the SFP port."
+ ::= { ethernet 63 }
+
+ mainPSUPortSyncERxStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ good(0),
+ waittoRestore(1),
+ failed(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Synchronous Ethernet (SyncE) Receive Status of the
+ main PSU port"
+ ::= { ethernet 64 }
+
+ auxPortSyncERxStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ good(0),
+ waittoRestore(1),
+ failed(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Synchronous Ethernet (SyncE) Receive Status of the
+ auxiliary port"
+ ::= { ethernet 65 }
+
+ sFPPortSyncERxStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ good(0),
+ waittoRestore(1),
+ failed(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Synchronous Ethernet (SyncE) Receive Status of the
+ SFP port"
+ ::= { ethernet 66 }
+
+ nIDULanPortStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ down(0),
+ copperLinkUp(1),
+ fiberLinkUp(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Current status of the NIDU LAN Ethernet link. NB: a
+ change of state may generate an SNMP trap and/or SMTP
+ email alert"
+ ::= { ethernet 67 }
+
+ nIDULanPortSpeedAndDuplex OBJECT-TYPE
+ SYNTAX INTEGER {
+ speed1000MbpsFullDuplex(0),
+ speed100MbpsFullDuplex(1),
+ speed100MbpsHalfDuplex(2),
+ speed10MbpsFullDuplex(3),
+ speed10MbpsHalfDuplex(4),
+ speedUnknown6(5)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The current speed and duplex of the Ethernet link to the
+ NIDU LAN Port"
+ ::= { ethernet 68 }
+
+ oOBPriorityQueueMapping OBJECT-TYPE
+ SYNTAX INTEGER {
+ q0(0),
+ q1(1),
+ q2(2),
+ q3(3),
+ q4(4),
+ q5(5),
+ q6(6),
+ q7(7)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Configures the classification of traffic to an egress
+ queue at the wireless port"
+ ::= { ethernet 69 }
+
+ nIDULanPortAutoNegotiation OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This controls whether the local Ethernet interface
+ configuration is automatically negotiated or forced. Do
+ not use a forced setting together with auto negotiation
+ at the Ethernet link partner. If you want to run your
+ Ethernet link at a fixed speed and duplex then you would
+ normally leave auto negotiation enabled and only enable
+ the single Auto Neg Advertisement option that you want
+ the link to run in - FORCING ETHERNET CONFIGURATION IS A
+ LAST RESORT WHICH SHOULD ONLY BE PERFORMED IF YOU ARE
+ HAVING PROBLEMS WITH AUTO NEGOTIATION - AND YOU MUST
+ ENSURE THAT YOU CONFIGURE BOTH THIS UNIT AND THE ETHERNET
+ LINK PARTNER TO WHICH IT IS CONNECTED IDENTICALLY (THE
+ LINK PARTNER MUST NOT HAVE AUTO NEGOTIATION ENABLED
+ EITHER, OTHERWISE A DUPLEX MISMATCH WILL OCCUR). NB: The
+ new setting will only take effect after a system reboot."
+ ::= { ethernet 70 }
+
+ nIDULanPortAutoNegAdvertisement OBJECT-TYPE
+ SYNTAX BITS {
+ negInvalid(2),
+ neg10MbpsHalfDuplex(3),
+ neg10MbpsFullDuplex(4),
+ neg100MbpsHalfDuplex(5),
+ neg100MbpsFullDuplex(6),
+ neg1000MbpsFullDuplex(7)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This sets the different Ethernet configurations that
+ will be advertised during auto negotiation. Note the new
+ setting will only take effect after a system reboot.
+ WARNING: Duplex mismatch may result if both ends of the
+ Ethernet link do not have the same settings. Do not auto
+ negotiation together with a fixed setting at the Ethernet
+ link partner. WARNING: Make sure that you select
+ option(s) that you know your connected equipment can
+ cater for!"
+ ::= { ethernet 71 }
+
+ nIDULanPortAutoMdix OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This enables/disables the Auto MDI/MDIX capability. NB:
+ The new setting will only take effect after a system
+ reboot"
+ ::= { ethernet 72 }
+
+ nIDULanPortGigabitMasterSlaveStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ master(0),
+ slave(1),
+ notApplicable(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The NIDU LAN port Gigabit Ethernet Master/Slave status"
+ ::= { ethernet 73 }
+
+ txMABFrames OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of MAB frames transmitted"
+ ::= { ethernet 74 }
+
+ managementNetworkAccessEnabled OBJECT-TYPE
+ SYNTAX INTEGER {
+ no(0),
+ yes(1)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "When enabled the local Out-of-Band interface can be used
+ to access the remote management network. If not enabled
+ the local management agent can still be accessed from the
+ remote management network and the local Out-of-Band
+ interface"
+ ::= { ethernet 75 }
+
+ transparentClockPort OBJECT-TYPE
+ SYNTAX INTEGER {
+ mainPSU(0),
+ aux(1),
+ sFP(2),
+ mainPSUplusAux(3),
+ mainPSUplusSFP(4),
+ auxplusSFP(5),
+ mainPSUplusAuxplusSFP(6)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "IEEE 1588 Transparent Clock source"
+ ::= { ethernet 81 }
+
+ syncESlavePort OBJECT-TYPE
+ SYNTAX INTEGER {
+ mainPSUPort(0),
+ sFPPort(1)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Select a Sync E Slave Port"
+ ::= { ethernet 82 }
+
+ sFPPortQLRxOverwrite OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ qLPRS(1),
+ qLSTU(2),
+ qLPRC(3),
+ qLST2(4),
+ qLSSUAQLTNC(5),
+ qLSSUB(6),
+ qLST3E(7),
+ qLEEC2QLST3(8),
+ qLEEC1QLSEC(9),
+ qLSMC(10),
+ qLPROV(11),
+ qLDNUQLDUS(12)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Override for the Synchronous Ethernet (SyncE) received
+ Quality Level (QL) on the SFP Port."
+ ::= { ethernet 83 }
+
+ ethernetInstancedTableNumber OBJECT-TYPE
+ SYNTAX INTEGER (1..8)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of entries in the ethernetInstancedTable."
+ ::= { ethernet 84 }
+
+ ethernetStatisticsTableNumber OBJECT-TYPE
+ SYNTAX INTEGER (1..3)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of entries in the ethernetStatisticsTable."
+ ::= { ethernet 86 }
+
+ -- EthernetPriorityTable group attribute definitions
+ --
+ ethernetPriorityTableIndex OBJECT-TYPE
+ SYNTAX INTEGER {
+ p0(1),
+ p1(2),
+ p2(3),
+ p3(4),
+ p4(5),
+ p5(6),
+ p6(7),
+ p7(8),
+ untagged(9)
+ }
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Ethernet priority flag, used to index values in the
+ ethernetPriorityTable"
+ ::= { ethernetPriorityTableEntry 1 }
+
+ ethernetPriorityQueueMapping OBJECT-TYPE
+ SYNTAX INTEGER {
+ q0(0),
+ q1(1),
+ q2(2),
+ q3(3),
+ q4(4),
+ q5(5),
+ q6(6),
+ q7(7)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Configures the classification of this Ethernet priority
+ (also known as IEEE 802.1p value) to an egress queue at
+ the wireless port"
+ ::= { ethernetPriorityTableEntry 2 }
+
+ -- L2CPPriorityTable group attribute definitions
+ --
+ l2CPPriorityTableIndex OBJECT-TYPE
+ SYNTAX INTEGER {
+ bridge(1),
+ mRP(2),
+ cFM(3),
+ rAPS(4),
+ eAPS(5),
+ pPPoEDiscoveryLCP(6)
+ }
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "L2CP priority flag, used to index values in the
+ l2CPPriorityTable"
+ ::= { l2CPPriorityTableEntry 1 }
+
+ l2CPPriorityQueueMapping OBJECT-TYPE
+ SYNTAX INTEGER {
+ q0(0),
+ q1(1),
+ q2(2),
+ q3(3),
+ q4(4),
+ q5(5),
+ q6(6),
+ q7(7)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Configures the classification of this layer two control
+ protocol (L2CP) to an egress queue at the wireless port"
+ ::= { l2CPPriorityTableEntry 2 }
+
+ -- IPDSCPPriorityTable group attribute definitions
+ --
+ iPDSCPPriorityTableIndex OBJECT-TYPE
+ SYNTAX INTEGER (1..64)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "IP DSCP priority flag, used to index values in the
+ iPDSCPPriorityTable"
+ ::= { iPDSCPPriorityTableEntry 1 }
+
+ iPDSCPPriorityQueueMapping OBJECT-TYPE
+ SYNTAX INTEGER {
+ q0(0),
+ q1(1),
+ q2(2),
+ q3(3),
+ q4(4),
+ q5(5),
+ q6(6),
+ q7(7)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Configures the classification of this IP differentiated
+ services code point (DSCP) value to an egress queue at
+ the wireless port"
+ ::= { iPDSCPPriorityTableEntry 2 }
+
+ -- MPLSTCPriorityTable group attribute definitions
+ --
+ mPLSTCPriorityTableIndex OBJECT-TYPE
+ SYNTAX INTEGER (1..8)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "MPLS TC priority flag, used to index values in the
+ mPLSTCPriorityTable"
+ ::= { mPLSTCPriorityTableEntry 1 }
+
+ mPLSTCPriorityQueueMapping OBJECT-TYPE
+ SYNTAX INTEGER {
+ q0(0),
+ q1(1),
+ q2(2),
+ q3(3),
+ q4(4),
+ q5(5),
+ q6(6),
+ q7(7)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Configures the classification of this MPLS traffic class
+ (the field formerly known as EXP) to an egress queue at
+ the wireless port"
+ ::= { mPLSTCPriorityTableEntry 2 }
+
+ -- EthernetInstancedTable group attribute definitions
+ --
+ ethernetInstancedTableIndex OBJECT-TYPE
+ SYNTAX INTEGER (1..8)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Used to index the ethernetInstancedTable."
+ ::= { ethernetInstancedTableEntry 1 }
+
+ dataBridgingStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Current status of Ethernet Data traffic bridging over
+ the wireless link"
+ ::= { ethernetInstancedTableEntry 2 }
+
+ -- EthernetStatisticsTable group attribute definitions
+ --
+ ethernetStatisticsTableIndex OBJECT-TYPE
+ SYNTAX INTEGER (1..3)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Used to index the ethernetStatisticsTable."
+ ::= { ethernetStatisticsTableEntry 1 }
+
+ ethernetStatisticsDataSource OBJECT-TYPE
+ SYNTAX OBJECT IDENTIFIER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object identifies the ethernet interface that this
+ ethernetStatistics entry is configured to report. In
+ order to identify a particular interface, this object
+ shall identify the instance of the ifIndex object,
+ defined in RFC 2233 [17], for the desired interface. For
+ example, if an entry were to receive data from interface
+ #1, this object would be set to ifIndex.1."
+ ::= { ethernetStatisticsTableEntry 2 }
+
+ ethernetStatisticsRxOctets OBJECT-TYPE
+ SYNTAX Counter64
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Total number of octets (excluding framing bits but
+ including FCS octets) received from the LAN in good
+ packets"
+ ::= { ethernetStatisticsTableEntry 3 }
+
+ ethernetStatisticsRxFrames OBJECT-TYPE
+ SYNTAX Counter64
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Total number of packets (including bad packets,
+ broadcast packets, and multicast packets) received"
+ ::= { ethernetStatisticsTableEntry 4 }
+
+ ethernetStatisticsRxBroadcasts OBJECT-TYPE
+ SYNTAX Counter64
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of good and bad broadcast packets received from
+ the LAN. Note that this does not include multicast
+ packets."
+ ::= { ethernetStatisticsTableEntry 5 }
+
+ ethernetStatisticsRxFramesWithError OBJECT-TYPE
+ SYNTAX Counter64
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of frames received with errors. The errors can be
+ a frame check sequence (CRC) error, an alignment error or
+ an incorrect frame length"
+ ::= { ethernetStatisticsTableEntry 6 }
+
+ ethernetStatisticsRxFramesUndersize OBJECT-TYPE
+ SYNTAX Counter64
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of short frames (<64 Bytes) received from the LAN
+ with or without a valid CRC"
+ ::= { ethernetStatisticsTableEntry 7 }
+
+ ethernetStatisticsRxFramesOversize OBJECT-TYPE
+ SYNTAX Counter64
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of oversize frames received from the LAN with or
+ without a valid CRC"
+ ::= { ethernetStatisticsTableEntry 8 }
+
+ ethernetStatisticsTxOctets OBJECT-TYPE
+ SYNTAX Counter64
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Total number of octets transmitted to the LAN"
+ ::= { ethernetStatisticsTableEntry 9 }
+
+ ethernetStatisticsTxFrames OBJECT-TYPE
+ SYNTAX Counter64
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Total number of frames transmitted to the LAN"
+ ::= { ethernetStatisticsTableEntry 10 }
+
+ ethernetStatisticsTxBroadcasts OBJECT-TYPE
+ SYNTAX Counter64
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of broadcast frames transmitted to the LAN. Note
+ that this does not include multicast packets."
+ ::= { ethernetStatisticsTableEntry 11 }
+
+ -- TDM group attribute definitions
+ --
+ tDMInterfaceControl OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(0),
+ e1(1),
+ t1(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The line interface type. If this is set to 'None' then
+ the TDM interfaces are disabled, and the TDM settings
+ will be ignored."
+ ::= { tDM 1 }
+
+ tDMInterfaceStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ ok(0),
+ connectedNotConfigured(1),
+ notConnected(2),
+ nIDUdetectedonAUXport(3),
+ error(4),
+ codeDownloadInProgress(5)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "@Current status of the connection to the TDM Box. A
+ state of 'Up' on a green background indicates that the
+ TDM Box is connected OK. When connecting a TDM Box only
+ the Main Ethernet port should be used"
+ ::= { tDM 2 }
+
+ tDMEnabledChannels OBJECT-TYPE
+ SYNTAX INTEGER (0..8)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of TDM channels enabled in the system"
+ ::= { tDM 3 }
+
+ tdmTableNumber OBJECT-TYPE
+ SYNTAX INTEGER (1..8)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of entries in the TdmTable"
+ ::= { tDM 4 }
+
+ tDMConfigurationMismatch OBJECT-TYPE
+ SYNTAX INTEGER {
+ ok(0),
+ linetypemismatch(1),
+ enabledchannelsmismatch(2),
+ linetypeandenabledchannelsmismatch(3)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Current status of the configuration of the TDM Box. A
+ state of 'Ok' on a green background indicates that the
+ TDM Box configuration is matched OK with the remote end."
+ ::= { tDM 6 }
+
+ lowestTDMModulationMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ modAcquisition(0),
+ modBpsk63percent(1),
+ modQpsk63percentSingle(2),
+ modTransient1(3),
+ modQpsk87percentSingle(4),
+ modTransient2(5),
+ mod16qam63percentSingleA(6),
+ modTransient3(7),
+ mod16qam87percentSingle(8),
+ modTransient4(9),
+ mod64qam75percentSingle(10),
+ modTransient5(11),
+ mod64qam92percentSingle(12),
+ modTransient6(13),
+ mod256qam81percentSingle(14),
+ mod16qam63percentSingleB(15),
+ mod16qam63percentDual(16),
+ modTransient7(17),
+ mod16qam87percentDual(18),
+ modTransient8(19),
+ mod64qam75percentDual(20),
+ modTransient9(21),
+ mod64qam92percentDual(22),
+ modTransient10(23),
+ mod256qam81percentDual(24)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The lowest modulation mode at which tdm data will be
+ sent. The effective lowest modulation mode is displayed
+ in the TDM Configuration page"
+ ::= { tDM 7 }
+
+ -- TdmTable group attribute definitions
+ --
+ tdmTableIndex OBJECT-TYPE
+ SYNTAX INTEGER (1..8)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "TDM Channel flag, used to index channels in the
+ TdmTable"
+ ::= { tdmTableEntry 1 }
+
+ tDMChannelStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ up(0),
+ noSignalLocal(1),
+ noSignalRemote(2),
+ noSignalLocalandRemote(3),
+ remoteTiming(4),
+ noSignalLocalandRemoteTiming(5),
+ disabled(6)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Current status of the TDM channels. A value of 0
+ indicates that a TDM channel is established"
+ ::= { tdmTableEntry 2 }
+
+ tDMChannelLineCode OBJECT-TYPE
+ SYNTAX INTEGER {
+ aMI(0),
+ b8ZSorHDB3(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The line code setting of the TDM interfaces. This must
+ match the setting of the device connected to an
+ interface"
+ ::= { tdmTableEntry 3 }
+
+ tDMChannelCableLength OBJECT-TYPE
+ SYNTAX INTEGER {
+ feet133(0),
+ feet266(1),
+ feet399(2),
+ feet533(3),
+ feet655(4)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The lengths of the cables connected to the TDM
+ interfaces, measured in feet"
+ ::= { tdmTableEntry 4 }
+
+ tDMChannelLoopback OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(0),
+ copper(1),
+ wireless(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The loopback status of TDM channels. This is intended
+ for installation testing and should be set to 'None' for
+ normal operation. The wire connections to a unit can be
+ tested by applying a 'Copper' loopback to the local unit.
+ The wireless connection to the remote unit can be tested
+ by applying a 'Wireless' loopback to the remote unit with
+ no loopback on the local unit. NB: a change of state may
+ generate an SNMP trap and/or SMTP email alert"
+ ::= { tdmTableEntry 5 }
+
+ -- License group attribute definitions
+ --
+ regulatoryBand OBJECT-TYPE
+ SYNTAX INTEGER {
+ regInvalid(0),
+ reg158GHz(1),
+ reg258GHz(2),
+ reg358GHz(3),
+ reg458GHzWithRTTT(4),
+ reg558GHz(5),
+ reg658GHz(6),
+ reg754GHz(7),
+ reg854GHz(8),
+ reg954GHz(9),
+ reg1058GHz(10),
+ reg1158GHz(11),
+ reg1254GHz(12),
+ reg1354GHz(13),
+ reg1449GHzPublicSafety(14),
+ reg15(15),
+ reg1659GHz(16),
+ reg1759GHz(17),
+ reg1849GHzPublicSafety(18),
+ reg1958GHz(19),
+ reg2054GHz(20),
+ reg2154GHz(21),
+ reg2258GHz(22),
+ reg23(23),
+ reg2458GHz(24),
+ reg2558GHz(25),
+ reg2654GHz(26),
+ reg2758GHz(27),
+ reg2858GHz(28),
+ reg2958GHz(29),
+ reg3054GHz(30),
+ reg3158GHz(31),
+ reg3249GHzLicensed(32),
+ reg3349GHzETSIBroadbandDisasterRelief(33),
+ reg3458GHz(34),
+ reg3558GHz(35),
+ reg3654GHz(36),
+ reg3758GHz(37),
+ reg3852GHz(38),
+ reg3951GHzETSIBroadbandDisasterRelief(39),
+ reg4054GHz(40),
+ reg4154GHz(41),
+ reg4254GHz(42),
+ reg4354GHz(43),
+ reg4458GHz(44),
+ reg4558GHz(45),
+ reg4658GHz(46),
+ reg4758GHz(47),
+ reg4858GHz(48),
+ reg4958GHz(49),
+ reg5058GHz(50),
+ reg5158GHz(51),
+ reg5258GHz(52),
+ reg5358GHz(53),
+ reg5458GHz(54),
+ reg5558GHz(55),
+ reg5654GHz(56),
+ reg5754GHz(57),
+ reg5858GHz(58),
+ reg5958GHz(59),
+ reg6058GHz(60),
+ reg6149GHz(61),
+ reg6251GHz52GHz(62),
+ reg6352GHz(63),
+ reg6451GHz(64),
+ reg6551GHz(65),
+ reg6651GHz(66),
+ reg6752GHz(67),
+ reg6852GHz(68),
+ reg6952GHz(69),
+ reg7052GHz(70),
+ reg7152GHz(71),
+ reg7252GHz(72),
+ reg7352GHz(73),
+ reg7452GHz(74),
+ reg7552GHz(75),
+ reg7652GHz(76),
+ reg7752GHz(77),
+ reg7849GHz(78),
+ reg7954GHz(79),
+ reg8049GHz(80),
+ reg8147GHz(81),
+ reg8247GHz(82),
+ reg8352GHz(83),
+ reg8451GHz(84),
+ reg8551GHz52GHz(85),
+ reg8652GHz54GHz(86),
+ reg8758GHz(87),
+ reg8849GHz(88),
+ reg8949GHz(89),
+ reg9054GHzParabolicantenna(90),
+ reg9152GHzParabolicantenna(91),
+ reg9251GHzParabolicantenna(92),
+ reg9349GHz(93),
+ reg9449GHz(94),
+ reg9545GHz(95),
+ reg9648GHz(96),
+ reg9752GHz(97),
+ reg9849GHz27dBiantenna(98),
+ reg9949GHz29dBiantenna(99),
+ reg10048GHz(100),
+ reg10158GHz(101),
+ reg102(102),
+ reg103(103),
+ reg10458GHzNoRTTT(104),
+ reg105(105),
+ reg106(106),
+ reg107(107),
+ reg108(108),
+ reg109(109),
+ reg110(110),
+ reg111(111),
+ reg112(112),
+ reg113(113),
+ reg114(114),
+ reg115(115),
+ reg116(116),
+ reg117(117),
+ reg118(118),
+ reg119(119),
+ reg120(120),
+ reg121(121),
+ reg122(122),
+ reg123(123),
+ reg124(124),
+ reg125(125),
+ reg126(126),
+ reg127(127),
+ reg128(128),
+ reg129(129),
+ reg130(130),
+ reg131(131),
+ reg132(132),
+ reg133(133),
+ reg134(134),
+ reg135(135),
+ reg136(136),
+ reg137(137),
+ reg138(138),
+ reg139(139),
+ reg140(140),
+ reg141(141),
+ reg142(142),
+ reg143(143),
+ reg144(144),
+ reg145(145),
+ reg146(146),
+ reg147(147),
+ reg148(148),
+ reg149(149),
+ reg150(150),
+ reg151(151),
+ reg152(152),
+ reg153(153),
+ reg154(154),
+ reg155(155),
+ reg156(156),
+ reg157(157),
+ reg158(158),
+ reg159(159),
+ reg160(160),
+ reg161(161),
+ reg162(162),
+ reg163(163),
+ reg164(164),
+ reg165(165),
+ reg166(166),
+ reg167(167),
+ reg168(168),
+ reg169(169),
+ reg170(170),
+ reg171(171),
+ reg172(172),
+ reg173(173),
+ reg174(174),
+ reg175(175),
+ reg176(176),
+ reg177(177),
+ reg178(178),
+ reg179(179),
+ reg180(180),
+ reg181(181),
+ reg182(182),
+ reg183(183),
+ reg184(184),
+ reg185(185),
+ reg186(186),
+ reg187(187),
+ reg188(188),
+ reg189(189),
+ reg190(190),
+ reg191(191),
+ reg192(192),
+ reg193(193),
+ reg194(194),
+ reg195(195),
+ reg196(196),
+ reg197(197),
+ reg198(198),
+ reg199(199),
+ reg200(200),
+ reg201(201),
+ reg202(202),
+ reg203(203),
+ reg204(204),
+ reg205(205),
+ reg206(206),
+ reg207(207),
+ reg208(208),
+ reg209(209),
+ reg210(210),
+ reg211(211),
+ reg212(212),
+ reg213(213),
+ reg214(214),
+ reg215(215),
+ reg216(216),
+ reg217(217),
+ reg218(218),
+ reg219(219),
+ reg220(220),
+ reg221(221),
+ reg222(222),
+ reg223(223),
+ reg224(224),
+ reg225(225),
+ reg226(226),
+ reg227(227),
+ reg228(228),
+ reg229(229),
+ reg230(230),
+ reg231(231),
+ reg232(232),
+ reg233(233),
+ reg234(234),
+ reg235(235),
+ reg236(236),
+ reg237(237),
+ reg238(238),
+ reg239(239),
+ reg240(240),
+ reg241(241),
+ reg242(242),
+ reg243(243),
+ reg244(244),
+ reg245(245),
+ reg246(246),
+ reg247(247),
+ reg248(248),
+ reg249(249),
+ reg250(250),
+ reg251(251),
+ reg252(252),
+ reg253(253),
+ reg254(254),
+ reg255(255)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Regulatory Band prohibits the wireless unit from
+ operating outside the regulated limits. An invalid
+ Regulatory Band may be caused by a missing or incorrect
+ License Key, a corrupt MAC Address or an attempt to
+ configure a Regulatory Band not allowed by the License
+ Key or an execution of Reset Configuration. NB: a change
+ of state may generate an SNMP trap and/or SMTP email
+ alert."
+ ::= { license 1 }
+
+ productVariant OBJECT-TYPE
+ SYNTAX INTEGER {
+ pTPxx400Full(0),
+ pTPxx400Deprecated1(1),
+ pTPxx400Deprecated2(2),
+ pTPxx400Lite(3),
+ spare1(4),
+ pTPxx300(5),
+ spare2(6),
+ spare3(7),
+ pTPxx500FullDeprecated(8),
+ pTPxx500LiteDeprecated(9),
+ pTPxx500(10),
+ pTPxx600Lite(11),
+ pTPxx600Full(12),
+ pTPxx650(13),
+ pMP455(14),
+ pTP800(15),
+ pMPMedusa(16),
+ pTPxx700(17),
+ pTP50670(18),
+ pTP50670ATEX(19),
+ pTP48670(20)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The product variant"
+ ::= { license 2 }
+
+ productName OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..63))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Name of the product variant"
+ ::= { license 3 }
+
+ frequencyVariant OBJECT-TYPE
+ SYNTAX INTEGER {
+ freq50XXX(0),
+ freq45XXX(1),
+ freq48XXX(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The hardware frequency variant"
+ ::= { license 5 }
+
+ sNMPv3Enable OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "SNMPv3 availability control"
+ ::= { license 9 }
+
+ licenseVersion OBJECT-TYPE
+ SYNTAX INTEGER (1)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The license key version."
+ ::= { license 12 }
+
+ licenseUnitSerialNumber OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..11))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The unit serial number."
+ ::= { license 13 }
+
+ licenseIssueNumber OBJECT-TYPE
+ SYNTAX INTEGER (0..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The license key issue number for this unit."
+ ::= { license 15 }
+
+ licenseCountry OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..103))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The country in which this unit is licensed to operate."
+ ::= { license 16 }
+
+ licenseNumberOfRegulatoryBands OBJECT-TYPE
+ SYNTAX INTEGER (0..32)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of regulatory bands for which the unit is
+ licensed to operate."
+ ::= { license 17 }
+
+ licenseBandwidthCap OBJECT-TYPE
+ SYNTAX INTEGER (0..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The wireless link bandwidth cap in MHz. Zero indicates
+ no bandwidth cap."
+ ::= { license 20 }
+
+ licenseEncryption OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(0),
+ aES128bit(1),
+ aES192bit(2),
+ aES256bit(3)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The license key encryption algorithms available."
+ ::= { license 21 }
+
+ licenseSecurityLevel OBJECT-TYPE
+ SYNTAX INTEGER {
+ normal(0),
+ fIPS(1),
+ uCAPL(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The license key security level."
+ ::= { license 22 }
+
+ licenseGroupAccess OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The license key group access setting. Note that for HCMP
+ topology, license group access must be enabled."
+ ::= { license 23 }
+
+ licenseOOBManagementSupport OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The license key Out-Of-Band (OOB) support setting."
+ ::= { license 24 }
+
+ licenseSFPPortSupport OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The license key Ethernet SFP Port support setting."
+ ::= { license 25 }
+
+ licenseAuxiliaryPortSupport OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The license key Ethernet Auxiliary Port support
+ setting."
+ ::= { license 26 }
+
+ licenseCapacity OBJECT-TYPE
+ SYNTAX INTEGER {
+ full(0),
+ mid(1),
+ lite(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The license key capacity. Note that for HCMP topology,
+ license capacity must be full."
+ ::= { license 27 }
+
+ licenseMaxNumberOfTDMChannels OBJECT-TYPE
+ SYNTAX INTEGER (0..8)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The license key maximum TDM channels setting. Zero
+ indicates TDM not available."
+ ::= { license 28 }
+
+ licenseIEEE1588Support OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The license key IEEE-1588 support setting."
+ ::= { license 29 }
+
+ licenseSyncESupport OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The license key SyncE support setting."
+ ::= { license 30 }
+
+ licenseIPv6Support OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The license key IPv6 support setting."
+ ::= { license 31 }
+
+ licenseMinimumFirmwareVersion OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..23))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The minimum firmware version required to support this
+ license key."
+ ::= { license 32 }
+
+ licenseFullCapabilityTrialStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ available(0),
+ active(1),
+ inactive(2),
+ expired(3),
+ unavailable(4)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The license key full capability trial period status."
+ ::= { license 33 }
+
+ licenseRemainingTrialPeriod OBJECT-TYPE
+ SYNTAX INTEGER (0..31536000)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The remaining time for the license key full capability
+ trial period."
+ ::= { license 34 }
+
+ licenseRemainingTrialPeriodAlarm OBJECT-TYPE
+ SYNTAX INTEGER {
+ fullCapabilityTrialNotActiveOrMoreThan7DaysRemaining(0),
+ fullCapabilityTrialExpiringInLessThan7Days(1),
+ fullCapabilityTrialExpiringInLessThan6Days(2),
+ fullCapabilityTrialExpiringInLessThan5Days(3),
+ fullCapabilityTrialExpiringInLessThan4Days(4),
+ fullCapabilityTrialExpiringInLessThan3Days(5),
+ fullCapabilityTrialExpiringInLessThan2Days(6),
+ fullCapabilityTrialExpiringInLessThan1Day(7),
+ fullCapabilityTrialHasExpired(8)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "If the full capability trial license period is about to
+ expire then purchase a license upgrade from your
+ reseller."
+ ::= { license 35 }
+
+ capacityVariantMismatchLinked OBJECT-TYPE
+ SYNTAX INTEGER {
+ noError(0),
+ mismatchDetected(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The remote node of this link has a lower link capacity.
+ Operating with a reduced effective link capacity."
+ ::= { license 36 }
+
+ licenseTDDSyncSupport OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The license key TDD Synchronization support setting."
+ ::= { license 37 }
+
+ licenseMaxLinkRange OBJECT-TYPE
+ SYNTAX INTEGER (0..2499)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Maximum licensed range for the wireless link in tenths
+ of km. A value of zero indicates that the maximum link
+ range is not limited by the license."
+ ::= { license 38 }
+
+ licenseTrialPeriod OBJECT-TYPE
+ SYNTAX INTEGER (0..365)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The license key maximum trial period, in days."
+ ::= { license 39 }
+
+ licenseRARSupport OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ mAB(1),
+ dLEP(2),
+ mABandDLEP(3)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The license key Radio Aware Routing support setting."
+ ::= { license 40 }
+
+ licenseGasGroup OBJECT-TYPE
+ SYNTAX INTEGER {
+ nonHAZLOCUnit(0),
+ gasGroupA(1),
+ gasGroupB(2),
+ gasGroupC(3),
+ gasGroupD(4)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The HAZLOC/ATEX Configuration of this unit. The Gas
+ Group is configured by the license key."
+ ::= { license 41 }
+
+ licenseLongMinimumFirmwareVersion OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..15))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The minimum long firmware version required to support
+ this license key."
+ ::= { license 42 }
+
+ licenseHCMPSupport OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ slaveEnabled(1),
+ masterEnabled(2),
+ masterandSlaveEnabled(3)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The license High Capacity MultiPoint support setting"
+ ::= { license 43 }
+
+ licenseInstancedTableNumber OBJECT-TYPE
+ SYNTAX INTEGER (1..8)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of entries in the licenseInstancedTable."
+ ::= { license 44 }
+
+ licenseTLSRekey OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The license TLS Rekey support setting"
+ ::= { license 46 }
+
+ licenseAdvanceHCMPSupport OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ slaveEnabled(1),
+ masterEnabled(2),
+ masterandSlaveEnabled(3)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The license Advance High Capacity MultiPoint support
+ setting"
+ ::= { license 47 }
+
+ licenseMinFirmwareVersionPTP650Emulation OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..15))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The minimum long firmware version of 650-Emulation
+ required to support this license key."
+ ::= { license 48 }
+
+ -- LicenseInstancedTable group attribute definitions
+ --
+ licenseInstancedTableIndex OBJECT-TYPE
+ SYNTAX INTEGER (1..8)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Used to index the LicenseInstancedTable."
+ ::= { licenseInstancedTableEntry 1 }
+
+ capacityVariantMismatch OBJECT-TYPE
+ SYNTAX INTEGER {
+ noError(0),
+ mismatchDetected(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The remote node of this link has a lower link capacity.
+ Operating with a reduced effective link capacity."
+ ::= { licenseInstancedTableEntry 2 }
+
+ -- LicenseRegulatoryBandsTable group attribute definitions
+ --
+ licenseRegulatoryBandsTableIndex OBJECT-TYPE
+ SYNTAX INTEGER (1..32)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "License regulatory bands, used to index the
+ LicenseRegulatoryBandsTable."
+ ::= { licenseRegulatoryBandsTableEntry 1 }
+
+ licenseRegulatoryBandsList OBJECT-TYPE
+ SYNTAX INTEGER {
+ regInvalid(0),
+ reg158GHz(1),
+ reg258GHz(2),
+ reg358GHz(3),
+ reg458GHzWithRTTT(4),
+ reg558GHz(5),
+ reg658GHz(6),
+ reg754GHz(7),
+ reg854GHz(8),
+ reg954GHz(9),
+ reg1058GHz(10),
+ reg1158GHz(11),
+ reg1254GHz(12),
+ reg1354GHz(13),
+ reg1449GHzPublicSafety(14),
+ reg15(15),
+ reg1659GHz(16),
+ reg1759GHz(17),
+ reg1849GHzPublicSafety(18),
+ reg1958GHz(19),
+ reg2054GHz(20),
+ reg2154GHz(21),
+ reg2258GHz(22),
+ reg23(23),
+ reg2458GHz(24),
+ reg2558GHz(25),
+ reg2654GHz(26),
+ reg2758GHz(27),
+ reg2858GHz(28),
+ reg2958GHz(29),
+ reg3054GHz(30),
+ reg3158GHz(31),
+ reg3249GHzLicensed(32),
+ reg3349GHzETSIBroadbandDisasterRelief(33),
+ reg3458GHz(34),
+ reg3558GHz(35),
+ reg3654GHz(36),
+ reg3758GHz(37),
+ reg3852GHz(38),
+ reg3951GHzETSIBroadbandDisasterRelief(39),
+ reg4054GHz(40),
+ reg4154GHz(41),
+ reg4254GHz(42),
+ reg4354GHz(43),
+ reg4458GHz(44),
+ reg4558GHz(45),
+ reg4658GHz(46),
+ reg4758GHz(47),
+ reg4858GHz(48),
+ reg4958GHz(49),
+ reg5058GHz(50),
+ reg5158GHz(51),
+ reg5258GHz(52),
+ reg5358GHz(53),
+ reg5458GHz(54),
+ reg5558GHz(55),
+ reg5654GHz(56),
+ reg5754GHz(57),
+ reg5858GHz(58),
+ reg5958GHz(59),
+ reg6058GHz(60),
+ reg6149GHz(61),
+ reg6251GHz52GHz(62),
+ reg6352GHz(63),
+ reg6451GHz(64),
+ reg6551GHz(65),
+ reg6651GHz(66),
+ reg6752GHz(67),
+ reg6852GHz(68),
+ reg6952GHz(69),
+ reg7052GHz(70),
+ reg7152GHz(71),
+ reg7252GHz(72),
+ reg7352GHz(73),
+ reg7452GHz(74),
+ reg7552GHz(75),
+ reg7652GHz(76),
+ reg7752GHz(77),
+ reg7849GHz(78),
+ reg7954GHz(79),
+ reg8049GHz(80),
+ reg8147GHz(81),
+ reg8247GHz(82),
+ reg8352GHz(83),
+ reg8451GHz(84),
+ reg8551GHz52GHz(85),
+ reg8652GHz54GHz(86),
+ reg8758GHz(87),
+ reg8849GHz(88),
+ reg8949GHz(89),
+ reg9054GHzParabolicantenna(90),
+ reg9152GHzParabolicantenna(91),
+ reg9251GHzParabolicantenna(92),
+ reg9349GHz(93),
+ reg9449GHz(94),
+ reg9545GHz(95),
+ reg9648GHz(96),
+ reg9752GHz(97),
+ reg9849GHz27dBiantenna(98),
+ reg9949GHz29dBiantenna(99),
+ reg10048GHz(100),
+ reg10158GHz(101),
+ reg102(102),
+ reg103(103),
+ reg10458GHzNoRTTT(104),
+ reg105(105),
+ reg106(106),
+ reg107(107),
+ reg108(108),
+ reg109(109),
+ reg110(110),
+ reg111(111),
+ reg112(112),
+ reg113(113),
+ reg114(114),
+ reg115(115),
+ reg116(116),
+ reg117(117),
+ reg118(118),
+ reg119(119),
+ reg120(120),
+ reg121(121),
+ reg122(122),
+ reg123(123),
+ reg124(124),
+ reg125(125),
+ reg126(126),
+ reg127(127),
+ reg128(128),
+ reg129(129),
+ reg130(130),
+ reg131(131),
+ reg132(132),
+ reg133(133),
+ reg134(134),
+ reg135(135),
+ reg136(136),
+ reg137(137),
+ reg138(138),
+ reg139(139),
+ reg140(140),
+ reg141(141),
+ reg142(142),
+ reg143(143),
+ reg144(144),
+ reg145(145),
+ reg146(146),
+ reg147(147),
+ reg148(148),
+ reg149(149),
+ reg150(150),
+ reg151(151),
+ reg152(152),
+ reg153(153),
+ reg154(154),
+ reg155(155),
+ reg156(156),
+ reg157(157),
+ reg158(158),
+ reg159(159),
+ reg160(160),
+ reg161(161),
+ reg162(162),
+ reg163(163),
+ reg164(164),
+ reg165(165),
+ reg166(166),
+ reg167(167),
+ reg168(168),
+ reg169(169),
+ reg170(170),
+ reg171(171),
+ reg172(172),
+ reg173(173),
+ reg174(174),
+ reg175(175),
+ reg176(176),
+ reg177(177),
+ reg178(178),
+ reg179(179),
+ reg180(180),
+ reg181(181),
+ reg182(182),
+ reg183(183),
+ reg184(184),
+ reg185(185),
+ reg186(186),
+ reg187(187),
+ reg188(188),
+ reg189(189),
+ reg190(190),
+ reg191(191),
+ reg192(192),
+ reg193(193),
+ reg194(194),
+ reg195(195),
+ reg196(196),
+ reg197(197),
+ reg198(198),
+ reg199(199),
+ reg200(200),
+ reg201(201),
+ reg202(202),
+ reg203(203),
+ reg204(204),
+ reg205(205),
+ reg206(206),
+ reg207(207),
+ reg208(208),
+ reg209(209),
+ reg210(210),
+ reg211(211),
+ reg212(212),
+ reg213(213),
+ reg214(214),
+ reg215(215),
+ reg216(216),
+ reg217(217),
+ reg218(218),
+ reg219(219),
+ reg220(220),
+ reg221(221),
+ reg222(222),
+ reg223(223),
+ reg224(224),
+ reg225(225),
+ reg226(226),
+ reg227(227),
+ reg228(228),
+ reg229(229),
+ reg230(230),
+ reg231(231),
+ reg232(232),
+ reg233(233),
+ reg234(234),
+ reg235(235),
+ reg236(236),
+ reg237(237),
+ reg238(238),
+ reg239(239),
+ reg240(240),
+ reg241(241),
+ reg242(242),
+ reg243(243),
+ reg244(244),
+ reg245(245),
+ reg246(246),
+ reg247(247),
+ reg248(248),
+ reg249(249),
+ reg250(250),
+ reg251(251),
+ reg252(252),
+ reg253(253),
+ reg254(254),
+ reg255(255)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The list of regulatory bands for which the unit is
+ licensed to operate. A regulatory band prohibits the
+ wireless unit from operating outside the regulated
+ limits. An invalid regulatory band indicates a corrupted
+ license key. NB: a change of state may generate an SNMP
+ trap and/or SMTP email alert."
+ ::= { licenseRegulatoryBandsTableEntry 2 }
+
+ -- Management group attribute definitions
+ --
+ targetRange OBJECT-TYPE
+ SYNTAX INTEGER (0..2500)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Initial target range used in installation +/-1,
+ expressed in tenths of a kilometer. When Auto-Ranging
+ this must be set to 0"
+ ::= { management 1 }
+
+ rangingMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ auto0to40km(0),
+ auto0to100km(1),
+ auto0to200km(2),
+ auto0to250km(3),
+ targetRange(4)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Type of ranging to use during installation, either
+ Auto-Ranging or use a selectable Target Range"
+ ::= { management 2 }
+
+ installStatusLinked OBJECT-TYPE
+ SYNTAX INTEGER {
+ ok(0),
+ wrongPeer(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A non-zero value indicates that signalling was received
+ with the wrong MAC address or a mismatched link name. NB:
+ It is very unusual to detect this, because units with
+ mis-configured Target MAC Address will normally fail to
+ establish a wireless link. However, rare circumstances
+ may establish a partial wireless link and detect this
+ situation. NB: A non-zero value on start-up, or a change
+ of value during operation, may generate an SNMP trap
+ and/or SMTP email alert"
+ ::= { management 3 }
+
+ installArmState OBJECT-TYPE
+ SYNTAX INTEGER {
+ disarmed(0),
+ armed(1)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Indicates if the unit is being installed. NB: a change
+ of state may generate an SNMP trap and/or SMTP email
+ alert"
+ ::= { management 4 }
+
+ tFTPServerPortNumber OBJECT-TYPE
+ SYNTAX INTEGER (0..65535)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The port number of the TFTP Server from which the TFTP
+ Software Upgrade File Name will be retrieved"
+ ::= { management 6 }
+
+ tFTPSoftwareUpgradeFileName OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..127))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Filename of the Software Upgrade to be loaded from the
+ TFTP Server"
+ ::= { management 7 }
+
+ tFTPStartSoftwareUpgrade OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Write '1' to this attribute to start the TFTP software
+ upgrade process. The attribute will be reset to 0 when
+ the upgrade process has finished. Continuing with the
+ software upgrade will cause spectrum management (DSO)
+ channel metrics collection to stop. The wireless unit
+ will no longer search for the optimal operational radio
+ channel. The performance of this wireless link may
+ deterioate over time. If operating in a regulatory band
+ where RADAR detection is mandatory you must complete the
+ software upgrade and reboot the unit. Channel metrics
+ collection will only be restarted after the wireless unit
+ has been rebooted"
+ ::= { management 8 }
+
+ tFTPSoftwareUpgradeStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ idle(0),
+ uploadinprogress(1),
+ uploadsuccessfulprogrammingFLASH(2),
+ upgradesuccessfulreboottorunthenewsoftwareimage(3),
+ upgradefailed(4),
+ upgradewarning(5)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The current status of the TFTP Software upgrade process"
+ ::= { management 9 }
+
+ tFTPSoftwareUpgradeStatusText OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..127))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Descriptive text describing the status of the TFTP
+ Software upgrade process, including any error details"
+ ::= { management 10 }
+
+ tFTPSoftwareUpgradeStatusAdditionalText OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..127))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Any additional text describing the status of the TFTP
+ Software upgrade process, including any error details"
+ ::= { management 11 }
+
+ hTTPAccessEnabled OBJECT-TYPE
+ SYNTAX INTEGER {
+ no(0),
+ yes(1)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This controls whether or not HTTP access is enabled,
+ i.e. if this is disabled (0) then the unit will not
+ respond to any requests on the HTTP port. Remote
+ management via HTTPS is not affected by this setting. Any
+ change in this setting will not take effect until the
+ unit has been rebooted. (Factory default = Enabled)"
+ ::= { management 12 }
+
+ telnetAccessEnabled OBJECT-TYPE
+ SYNTAX INTEGER {
+ no(0),
+ yes(1)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This controls whether or not Telnet access is enabled,
+ i.e. if this is disabled (0) then the unit will not
+ respond to any requests on the TELNET port. Any change in
+ this setting will not take effect until the unit has been
+ rebooted. (Factory default = Disabled)"
+ ::= { management 13 }
+
+ hTTPPortNumber OBJECT-TYPE
+ SYNTAX INTEGER (0..65535)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This controls the port number for HTTP access. A value
+ of zero will use the default port number. Any change in
+ this setting will not take effect until the unit has been
+ rebooted. (Factory default = 80)"
+ ::= { management 14 }
+
+ hTTPSPortNumber OBJECT-TYPE
+ SYNTAX INTEGER (0..65535)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This controls the port number for HTTPS access. A value
+ of zero will use the default port number. Availability of
+ HTTPS is controlled via the License Key. Any change in
+ this setting will not take effect until the unit has been
+ rebooted. (Factory default = 443)"
+ ::= { management 15 }
+
+ telnetPortNumber OBJECT-TYPE
+ SYNTAX INTEGER (0..65535)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This controls the port number for TELNET access. A value
+ of zero will use the default port number. Any change in
+ this setting will not take effect until the unit has been
+ rebooted. (Factory default = 23)"
+ ::= { management 16 }
+
+ hTTPSAccessEnabled OBJECT-TYPE
+ SYNTAX INTEGER {
+ no(0),
+ yes(1)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This controls whether or not HTTPS access is enabled,
+ i.e. if this is disabled (0) then the unit will not
+ respond to any requests on the HTTPS port. Remote
+ management via HTTP is not affected by this setting. Any
+ change in this setting will not take effect until the
+ unit has been rebooted. (Factory default = Disabled)"
+ ::= { management 17 }
+
+ tFTPServerInternetAddressType OBJECT-TYPE
+ SYNTAX INTEGER {
+ unknown(0),
+ ipv4(1),
+ ipv6(2),
+ ipv4z(3),
+ ipv6z(4),
+ unknown6(5),
+ unknown7(6),
+ unknown8(7),
+ unknown9(8),
+ unknown10(9),
+ unknown11(10),
+ unknown12(11),
+ unknown13(12),
+ unknown14(13),
+ unknown15(14),
+ unknown16(15),
+ dns(16)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The type of Internet address specified by the associated
+ tFTPServerInternetAddress."
+ ::= { management 18 }
+
+ tFTPServerInternetAddress OBJECT-TYPE
+ SYNTAX InetAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "INET address of the TFTP Server from which the TFTP
+ Software Upgrade File Name will be retrieved"
+ ::= { management 19 }
+
+ lowestDataModulationMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ modAcquisition(0),
+ modBpsk63percent(1),
+ modQpsk63percentSingle(2),
+ modTransient1(3),
+ modQpsk87percentSingle(4),
+ modTransient2(5),
+ mod16qam63percentSingleA(6),
+ modTransient3(7),
+ mod16qam87percentSingle(8),
+ modTransient4(9),
+ mod64qam75percentSingle(10),
+ modTransient5(11),
+ mod64qam92percentSingle(12),
+ modTransient6(13),
+ mod256qam81percentSingle(14),
+ mod16qam63percentSingleB(15),
+ mod16qam63percentDual(16),
+ modTransient7(17),
+ mod16qam87percentDual(18),
+ modTransient8(19),
+ mod64qam75percentDual(20),
+ modTransient9(21),
+ mod64qam92percentDual(22),
+ modTransient10(23),
+ mod256qam81percentDual(24)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The lowest modulation mode at which Ethernet Data
+ traffic will be bridged over the wireless link"
+ ::= { management 20 }
+
+ tFTPClient OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This controls whether or not TFTP client is enabled,
+ i.e. if this is disabled (0) then the unit will not
+ respond to any TFTP software download requests. (Factory
+ default = Enabled)"
+ ::= { management 22 }
+
+ mgmtInstancedTableNumber OBJECT-TYPE
+ SYNTAX INTEGER (1..8)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of entries in the mgmtInstancedTable."
+ ::= { management 23 }
+
+ tFTPServerResolvedInternetAddress OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..63))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "IP Address of the TFTP Server."
+ ::= { management 25 }
+
+ installationMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ armWithTones(0),
+ armWithoutTones(1),
+ changeConfigWithoutArming(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Determines whether the unit is armed for antenna
+ alignment, and whether it emits audible installation
+ tones to indicate the state and strength of the received
+ signal. Alternatively, configuration changes may be made
+ without arming the unit (typically once a link has
+ already been established). Note: while armed, a unit will
+ have reduced link performance and functionality."
+ ::= { management 26 }
+
+ -- MgmtInstancedTable group attribute definitions
+ --
+ mgmtInstancedTableIndex OBJECT-TYPE
+ SYNTAX INTEGER (1..8)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Used to index values in the mgmtInstancedTable"
+ ::= { mgmtInstancedTableEntry 1 }
+
+ installStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ ok(0),
+ wrongPeer(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A non-zero value indicates that signalling was received
+ with the wrong MAC address or a mismatched link name. NB:
+ It is very unusual to detect this, because units with
+ mis-configured Target MAC Address will normally fail to
+ establish a wireless link. However, rare circumstances
+ may establish a partial wireless link and detect this
+ situation. NB: A non-zero value on start-up, or a change
+ of value during operation, may generate an SNMP trap
+ and/or SMTP email alert"
+ ::= { mgmtInstancedTableEntry 2 }
+
+ -- PhyControl group attribute definitions
+ --
+ linkSymmetry OBJECT-TYPE
+ SYNTAX INTEGER {
+ symmetryAdaptive(0),
+ symmetry2to1(1),
+ symmetry1to1(2),
+ symmetry1to2(3),
+ symmetry3to1(4),
+ symmetry1to3(5),
+ symmetry5to1(6),
+ symmetry1to5(7)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Provides configuration options for sharing the available
+ wireless capacity between the transmit and receive
+ directions. Fixed link symmetry is defined by a ratio of
+ the burst duration for the transmit direction to the
+ burst duration for the receive direction. Permitted
+ settings are 5:1, 3:1, 2:1, 1:1, 1:2, 1:3, 1:5. The 1:1
+ option provides fixed symmetric operation. The adaptive
+ option selects transmit and receive burst durations
+ automatically in response to the offered Ethernet traffic
+ in each link direction. This attribute is valid only for
+ a unit configured as a TDD Master"
+ ::= { phyControl 1 }
+
+ userConfiguredMaxModulationMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ modBpsk63percent(0),
+ modQpsk63percent(1),
+ modQpsk87percent(2),
+ mod16qam63percent(3),
+ mod16qam87percent(4),
+ mod64qam75percent(5),
+ mod64qam92percent(6),
+ mod256qam81percent(7)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The maximum receive modulation mode controls the MAX
+ mode used for adaptive modulation. NOTE: This attribute
+ is automatically disabled when the installation agent is
+ armed. To disarm the installation agent use the
+ installation wizard"
+ ::= { phyControl 2 }
+
+ linkModeOptimization OBJECT-TYPE
+ SYNTAX INTEGER {
+ iPTraffic(0),
+ tDMTraffic(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Optimizes the wireless link behavior for the type of
+ traffic to be carried. In 'IP Traffic' mode, the wireless
+ link will minimize transmission errors by automatically
+ adapting the modulation mode. In 'TDM Traffic' mode, the
+ wireless link will minimize transmission latency and
+ preserve throughput by maintaining a higher modulation
+ mode in the presence of a limited number of errors. The
+ 'TDM Traffic' mode is recommended for E1/T1 applications
+ and connectionless protocols."
+ ::= { phyControl 3 }
+
+ txColorCode OBJECT-TYPE
+ SYNTAX INTEGER {
+ a(0),
+ b(1),
+ c(2),
+ d(3),
+ e(4)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Transmit Color Code. This attribute need only be
+ considered when the unit is installed in a network of
+ wireless units and where some of the units are operating
+ on the same frequency. In this case, the value would
+ normally be derived by a network planner. In all other
+ cases, it is recommended that this attribute is left at
+ the default value. NOTE: For the link to operate, the
+ value of this parameter must in all cases match the value
+ of the Rx Color Code parameter at the far end of the
+ link."
+ ::= { phyControl 4 }
+
+ rxColorCode OBJECT-TYPE
+ SYNTAX INTEGER {
+ a(0),
+ b(1),
+ c(2),
+ d(3),
+ e(4)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Receive Color Code. This attribute need only be
+ considered when the unit is installed in a network of
+ wireless units and where some of the units are operating
+ on the same frequency. In this case, the value would
+ normally be derived by a network planner. In all other
+ cases, it is recommended that this attribute is left at
+ the default value. NOTE: For the link to operate, the
+ value of this parameter must in all cases match the value
+ of the Tx Color Code parameter at the far end of the
+ link."
+ ::= { phyControl 5 }
+
+ remoteMaximumTransmitPowerLinked OBJECT-TYPE
+ SYNTAX INTEGER (-15..30)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Maximum transmit power the remote wireless unit is
+ permitted to use when establishing and maintaining the
+ wireless link"
+ ::= { phyControl 6 }
+
+ phyControlInstancedTableNumber OBJECT-TYPE
+ SYNTAX INTEGER (1..8)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of entries in the PhyControlInstancedTable."
+ ::= { phyControl 7 }
+
+ -- PhyControlInstancedTable group attribute definitions
+ --
+ phyControlInstancedTableIndex OBJECT-TYPE
+ SYNTAX INTEGER (1..8)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Used to index the PhyControlInstancedTable."
+ ::= { phyControlInstancedTableEntry 1 }
+
+ remoteMaximumTransmitPower OBJECT-TYPE
+ SYNTAX INTEGER (-15..30)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Maximum transmit power the remote wireless unit is
+ permitted to use when establishing and maintaining the
+ wireless link"
+ ::= { phyControlInstancedTableEntry 2 }
+
+ -- PhyStatus group attribute definitions
+ --
+ linkLossLinked OBJECT-TYPE
+ SYNTAX INTEGER (-500..500)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The wireless link loss expressed in tenths of a dB"
+ ::= { phyStatus 1 }
+
+ receivePowerLinked OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Receive power expressed in tenths of a dBm"
+ ::= { phyStatus 2 }
+
+ vectorErrorLinked OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The vector error measurement compares the received
+ signal's IQ modulation characteristics to an ideal signal
+ to determine the composite error vector magnitude. The
+ value represented by this attribute is the average vector
+ error over the previous second expressed in tenths of a
+ dB"
+ ::= { phyStatus 3 }
+
+ transmitPowerLinked OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Transmit power expressed in tenths of a dBm"
+ ::= { phyStatus 4 }
+
+ receiveChannel OBJECT-TYPE
+ SYNTAX INTEGER (0..305)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Current active receive channel"
+ ::= { phyStatus 5 }
+
+ transmitChannel OBJECT-TYPE
+ SYNTAX INTEGER (0..305)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Current active transmit channel"
+ ::= { phyStatus 6 }
+
+ receiveFreqMHz OBJECT-TYPE
+ SYNTAX INTEGER (0..6050)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Current receive frequency expressed in integer MHz"
+ ::= { phyStatus 7 }
+
+ transmitFreqMHz OBJECT-TYPE
+ SYNTAX INTEGER (0..6050)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Current transmit frequency expressed in integer MHz"
+ ::= { phyStatus 8 }
+
+ signalStrengthRatioLinked OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Signal strength ratio (Vertical / Horizontal) : the
+ number of dB larger the Vertical antenna input is than
+ the Horizontal antenna input expressed in tenths of a dB"
+ ::= { phyStatus 9 }
+
+ receiveFreqKHz OBJECT-TYPE
+ SYNTAX INTEGER (0..6050000)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Current receive frequency expressed as KHz"
+ ::= { phyStatus 10 }
+
+ transmitFreqKHz OBJECT-TYPE
+ SYNTAX INTEGER (0..6050000)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Current transmit frequency expressed as KHz"
+ ::= { phyStatus 11 }
+
+ rawReceivePowerLinked OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Raw receive power expressed in tenths of a dBm"
+ ::= { phyStatus 12 }
+
+ rangeLinked OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Distance between the two peer wireless units expressed
+ in tenths of a kilometer"
+ ::= { phyStatus 13 }
+
+ receiveModulationModeLinked OBJECT-TYPE
+ SYNTAX INTEGER (0..28)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Current active receive modulation mode"
+ ::= { phyStatus 14 }
+
+ transmitModulationModeLinked OBJECT-TYPE
+ SYNTAX INTEGER (0..28)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Current active transmit modulation mode"
+ ::= { phyStatus 15 }
+
+ searchStateLinked OBJECT-TYPE
+ SYNTAX INTEGER {
+ registering(0),
+ searching(1),
+ acquiring(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Search status of the wireless modem. 'Registering' means
+ that the modem has locked to an OFDM signal, and the
+ wireless link is up. 'Searching' means that no wireless
+ signal has been detected. 'Acquiring' means that a
+ wireless signal has been detected, but the modem has not
+ locked to an OFDM signal."
+ ::= { phyStatus 16 }
+
+ remoteMACAddressLinked OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(6))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "MAC Address of the peer wireless unit"
+ ::= { phyStatus 17 }
+
+ phyInstancedStatusTableNumber OBJECT-TYPE
+ SYNTAX INTEGER (1..8)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of entries in the phyInstancedStatusTable."
+ ::= { phyStatus 18 }
+
+ tempPcb OBJECT-TYPE
+ SYNTAX INTEGER (-100..200)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "PCB temperature expressed in Celsius"
+ ::= { phyStatus 20 }
+
+ -- PhyInstancedStatusTable group attribute definitions
+ --
+ phyInstancedStatusTableIndex OBJECT-TYPE
+ SYNTAX INTEGER (1..8)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Used to index the phyInstancedStatusTable."
+ ::= { phyInstancedStatusTableEntry 1 }
+
+ linkLoss OBJECT-TYPE
+ SYNTAX INTEGER (-500..500)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The link loss measurement = Peer Tx_Power(dBm) - Local
+ Rx_Power(dBm) + 2 x Antenna_Pattern(dBi) "
+ ::= { phyInstancedStatusTableEntry 2 }
+
+ receivePower OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Receive power histogram "
+ ::= { phyInstancedStatusTableEntry 3 }
+
+ vectorError OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The vector error measurement compares the received
+ signal's IQ modulation characteristics to an ideal signal
+ to determine the composite error vector magnitude "
+ ::= { phyInstancedStatusTableEntry 4 }
+
+ signalStrengthRatio OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Signal strength ratio (Vertical / Horizontal) : the
+ number of dB larger the Vertical antenna input is than
+ the Horizontal antenna input "
+ ::= { phyInstancedStatusTableEntry 5 }
+
+ range OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Distance between the two peer wireless units"
+ ::= { phyInstancedStatusTableEntry 6 }
+
+ receiveModulationMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ modAcquisition(0),
+ modBpsk63percent(1),
+ modQpsk63percentSingle(2),
+ modTransient1(3),
+ modQpsk87percentSingle(4),
+ modTransient2(5),
+ mod16qam63percentSingleA(6),
+ modTransient3(7),
+ mod16qam87percentSingle(8),
+ modTransient4(9),
+ mod64qam75percentSingle(10),
+ modTransient5(11),
+ mod64qam92percentSingle(12),
+ modTransient6(13),
+ mod256qam81percentSingle(14),
+ mod16qam63percentSingleB(15),
+ mod16qam63percentDual(16),
+ modTransient7(17),
+ mod16qam87percentDual(18),
+ modTransient8(19),
+ mod64qam75percentDual(20),
+ modTransient9(21),
+ mod64qam92percentDual(22),
+ modTransient10(23),
+ mod256qam81percentDual(24)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Current active receive modulation mode"
+ ::= { phyInstancedStatusTableEntry 7 }
+
+ transmitModulationMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ modAcquisition(0),
+ modBpsk63percent(1),
+ modQpsk63percentSingle(2),
+ modTransient1(3),
+ modQpsk87percentSingle(4),
+ modTransient2(5),
+ mod16qam63percentSingleA(6),
+ modTransient3(7),
+ mod16qam87percentSingle(8),
+ modTransient4(9),
+ mod64qam75percentSingle(10),
+ modTransient5(11),
+ mod64qam92percentSingle(12),
+ modTransient6(13),
+ mod256qam81percentSingle(14),
+ mod16qam63percentSingleB(15),
+ mod16qam63percentDual(16),
+ modTransient7(17),
+ mod16qam87percentDual(18),
+ modTransient8(19),
+ mod64qam75percentDual(20),
+ modTransient9(21),
+ mod64qam92percentDual(22),
+ modTransient10(23),
+ mod256qam81percentDual(24)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Current active transmit modulation mode"
+ ::= { phyInstancedStatusTableEntry 8 }
+
+ searchState OBJECT-TYPE
+ SYNTAX INTEGER {
+ registering(0),
+ searching(1),
+ acquiring(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Search status of the wireless modem. 'Registering' means
+ that the modem has locked to an OFDM signal, and the
+ wireless link is up. 'Searching' means that no wireless
+ signal has been detected. 'Acquiring' means that a
+ wireless signal has been detected, but the modem has not
+ locked to an OFDM signal."
+ ::= { phyInstancedStatusTableEntry 9 }
+
+ remoteMACAddress OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(6))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "MAC Address of the peer wireless unit"
+ ::= { phyInstancedStatusTableEntry 10 }
+
+ rawReceivePower OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Raw receive power"
+ ::= { phyInstancedStatusTableEntry 11 }
+
+ transmitPower OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Transmit power histogram "
+ ::= { phyInstancedStatusTableEntry 12 }
+
+ -- Alarms group attribute definitions
+ --
+ unitOutOfCalibration OBJECT-TYPE
+ SYNTAX INTEGER {
+ calibrated(0),
+ partialCalibration(1),
+ invalidCalibration(2),
+ bandwidthvariantunsupportedPAsShutdown(3),
+ outOfCalibrationPAsShutdown(4)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The unit is out of calibration"
+ ::= { alarms 1 }
+
+ incompatibleRegulatoryBandsLinked OBJECT-TYPE
+ SYNTAX INTEGER {
+ regOK(0),
+ regIncompatibleLicenseKeys(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The master and slave units have incompatible regulatory
+ bands. NB: Both units must have compatible license keys"
+ ::= { alarms 4 }
+
+ noWirelessChannelAvailable OBJECT-TYPE
+ SYNTAX INTEGER {
+ ok(0),
+ noWirelessChannelAvailable(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Spectrum Management was unable to locate a suitable
+ wireless channel to operate on"
+ ::= { alarms 5 }
+
+ wirelessLinkDisabledWarning OBJECT-TYPE
+ SYNTAX INTEGER {
+ ok(0),
+ disabledBySNMPifAdminStatus(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The SNMP ifAdminStatus of the wireless interface has
+ disabled wireless traffic"
+ ::= { alarms 6 }
+
+ mainPSUPortDisabledWarning OBJECT-TYPE
+ SYNTAX INTEGER {
+ ok(0),
+ disabledBySNMPifAdminStatus(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The SNMP ifAdminStatus of the interface has disabled
+ Ethernet traffic"
+ ::= { alarms 7 }
+
+ sFPError OBJECT-TYPE
+ SYNTAX INTEGER {
+ ok(0),
+ installedSFPNotLicensed(1),
+ fiberLinkNotEstablishedButLOSNotDetected(2),
+ fiberLinkNotEstablishedAndLOSDetected(3),
+ installedSFPNotSupported(4),
+ sFPInitializationFailed(5)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "If the SFP link is not OK, there are five possible
+ causes: Either a SFP has been installed but the license
+ key does not include SFP fiber support, a fiber link
+ could not be established even though no LOS was detected
+ (i.e. an optical carrier was detected, which could be due
+ to a broken TX fiber, or because the link is disabled at
+ the fiber link partner), a fiber link could not be
+ established and LOS is detected (i.e. no optical carrier
+ is detected), the installed SFP is not supported or the
+ installed SFP failed to initialize correctly. NB: a
+ change of status may generate an SNMP trap and/or SMTP
+ email alert"
+ ::= { alarms 8 }
+
+ mainPSUPortConfigurationMismatch OBJECT-TYPE
+ SYNTAX INTEGER {
+ noError(0),
+ mismatchDetected(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The detection of Ethernet fragments (runt packets) when
+ the link is in full duplex is an indication of an
+ auto-negotiation or forced configuration mismatch"
+ ::= { alarms 9 }
+
+ incompatibleMasterAndSlaveLinked OBJECT-TYPE
+ SYNTAX INTEGER {
+ ok(0),
+ incompatibleProductVariants(1),
+ differentSoftwareVersionsRunning(2),
+ tDDFrameConfigurationModeMismatch(3)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A non-zero value indicates that the master and slave
+ ends of a link are different hardware products, or have
+ different software versions, or have different TDD Frame
+ Configuraton Modes (Standard/Expert) in HCMP topology.
+ NB: It is very unusual to detect this, because
+ incompatible units will normally fail to establish a
+ wireless link. However, some combinations may establish a
+ partial wireless link and detect this situation. NB: A
+ non-zero value may generate an SNMP trap and/or SMTP
+ email alert"
+ ::= { alarms 10 }
+
+ tDDSynchronizationStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ locked(0),
+ holdover(1),
+ holdoverNoGPSSyncIn(2),
+ notSynchronized(3),
+ notSynchronizedNoGPSSyncIn(4),
+ pTPSYNCNotConnected(5),
+ initialising(6),
+ clusterTimingMaster(7),
+ acquiringLock(8),
+ inactive(9)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "An alarm value (displayed in red) indicates that one of
+ the following conditions has not been met (i) An external
+ timing system is connected or internal timing has been
+ configured. (ii) The timing system is providing a useable
+ reference. (iii) The ODU is locked to this reference."
+ ::= { alarms 11 }
+
+ auxPortDisabledWarning OBJECT-TYPE
+ SYNTAX INTEGER {
+ ok(0),
+ disabledBySNMPifAdminStatus(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The SNMP ifAdminStatus of the interface has disabled
+ Ethernet traffic"
+ ::= { alarms 12 }
+
+ tDDSynchronizationAlarm OBJECT-TYPE
+ SYNTAX INTEGER {
+ ok(0),
+ synchronizationLost(1),
+ referenceSignalLost(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Not Synchronized indicates failure of the external
+ timing system for a period greater than the holdover
+ timer. TDD frame timing will have drifted, and this link
+ may cause interference with other links in a synchronized
+ network. Timing System Failure is an early warning,
+ indicating that 80% of the holdover period has expired."
+ ::= { alarms 13 }
+
+ linkModeOptimizationMismatchLinked OBJECT-TYPE
+ SYNTAX INTEGER {
+ ok(0),
+ linkModeOptimizationMismatch(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The remote node of this link has been configured with a
+ different link mode optimization"
+ ::= { alarms 14 }
+
+ auxPortConfigurationMismatch OBJECT-TYPE
+ SYNTAX INTEGER {
+ noError(0),
+ mismatchDetected(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The detection of Ethernet fragments (runt packets) when
+ the link is in full duplex is an indication of an
+ auto-negotiation or forced configuration mismatch. This
+ alarm is only raised if an Out-of-Band Management Mode
+ has been configured."
+ ::= { alarms 15 }
+
+ secureModeAlarm OBJECT-TYPE
+ SYNTAX INTEGER {
+ secureModeIsActive(0),
+ secureModeIsNotConfigured(1),
+ secureModeIsConfiguredButNotActive(2),
+ secureModeIsNotSupported(3)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The secure mode (e.g. FIPS, UC-APL) state of the unit.
+ The secure mode is not configured(1) state indicates that
+ the unit is capable of secure mode operation, and one or
+ more of the following security materials has not been
+ configured: Key Of Keys, Private Key, Public Certificate,
+ DRNG Entropy Status, Wireless Encryption Key. The secure
+ mode mode is configured but not active(2) state indicates
+ that the unit is capable of secure mode operation, and
+ the security material has been configured, but the
+ configuration of interfaces is not consistent with secure
+ mode operation. The secure mode is not supported(3) state
+ indicates that the unit is not capable of secure mode
+ operation. The secure mode capability requires
+ appropriate hardware compatibility, license key and
+ software image."
+ ::= { alarms 16 }
+
+ dataBridgingStatusAlarmLinked OBJECT-TYPE
+ SYNTAX INTEGER {
+ bridgingEnabled(0),
+ bridgingDisabled(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Ethernet Data traffic bridging is disabled because the
+ wireless link is not operating at the configured Lowest
+ Data Modulation Mode"
+ ::= { alarms 17 }
+
+ sFPPortDisabledWarning OBJECT-TYPE
+ SYNTAX INTEGER {
+ ok(0),
+ disabledBySNMPifAdminStatus(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The SNMP ifAdminStatus of the interface has disabled
+ Ethernet traffic"
+ ::= { alarms 18 }
+
+ sFPPortConfigurationMismatch OBJECT-TYPE
+ SYNTAX INTEGER {
+ noError(0),
+ mismatchDetected(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The detection of Ethernet fragments (runt packets) when
+ the link is in full duplex is an indication of an
+ auto-negotiation or forced configuration mismatch. This
+ alarm is only raised if an Out-of-Band Management Mode
+ has been configured."
+ ::= { alarms 19 }
+
+ maxLinkRangeExceededLinked OBJECT-TYPE
+ SYNTAX INTEGER {
+ maxLinkRangeOK(0),
+ maxLinkRangeExceeded(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The measured link range is greater than the maximum
+ allowed by the license key. The link will operate at a
+ reduced capacity while this condition applies. This alarm
+ is only raised if the license specifies a maximum link
+ range and the trial license is not active."
+ ::= { alarms 20 }
+
+ nIDULanPortDisabledWarning OBJECT-TYPE
+ SYNTAX INTEGER {
+ ok(0),
+ disabledBySNMPifAdminStatus(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The SNMP ifAdminStatus of the interface has disabled
+ Ethernet traffic"
+ ::= { alarms 21 }
+
+ nIDULanPortConfigurationMismatch OBJECT-TYPE
+ SYNTAX INTEGER {
+ noError(0),
+ mismatchDetected(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The detection of Ethernet fragments (runt packets) when
+ the link is in full duplex is an indication of an
+ auto-negotiation or forced configuration mismatch."
+ ::= { alarms 22 }
+
+ portAllocationMismatchLinked OBJECT-TYPE
+ SYNTAX INTEGER {
+ portAllocationOK(0),
+ mismatchinOutofBandRemoteManagementService(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The local and remote ODUs have different services
+ configured."
+ ::= { alarms 23 }
+
+ transparentClockSourcePortAlarm OBJECT-TYPE
+ SYNTAX INTEGER {
+ ok(0),
+ invalidTransparentClockSourcePort(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Transparent Clock will not function properly because
+ SFP, the selected clock source port is not FIBER"
+ ::= { alarms 25 }
+
+ alarmInstancedTableNumber OBJECT-TYPE
+ SYNTAX INTEGER (1..8)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of entries in the alarmInstancedTable."
+ ::= { alarms 26 }
+
+ secureLicenseSignatureAlarm OBJECT-TYPE
+ SYNTAX INTEGER {
+ licenseisDSA2048signed(0),
+ licenseisDSA1024signed(1),
+ licensesignaturealarmisnotrelevant(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Alarm condition indicates that the unit's license is not
+ secure enough for FIPS approved mode."
+ ::= { alarms 28 }
+
+ -- AlarmInstancedTable group attribute definitions
+ --
+ alarmInstancedTableIndex OBJECT-TYPE
+ SYNTAX INTEGER (1..8)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Used to index values in the alarmInstancedTable"
+ ::= { alarmInstancedTableEntry 1 }
+
+ incompatibleMasterAndSlave OBJECT-TYPE
+ SYNTAX INTEGER {
+ ok(0),
+ incompatibleProductVariants(1),
+ differentSoftwareVersionsRunning(2),
+ tDDFrameConfigurationModeMismatch(3)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A non-zero value indicates that the master and slave
+ ends of a link are different hardware products, or have
+ different software versions, or have different TDD Frame
+ Configuraton Modes (Standard/Expert) in HCMP topology.
+ NB: It is very unusual to detect this, because
+ incompatible units will normally fail to establish a
+ wireless link. However, some combinations may establish a
+ partial wireless link and detect this situation. NB: A
+ non-zero value may generate an SNMP trap and/or SMTP
+ email alert"
+ ::= { alarmInstancedTableEntry 2 }
+
+ linkModeOptimizationMismatch OBJECT-TYPE
+ SYNTAX INTEGER {
+ ok(0),
+ linkModeOptimizationMismatch(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The remote node of this link has been configured with a
+ different link mode optimization"
+ ::= { alarmInstancedTableEntry 3 }
+
+ dataBridgingStatusAlarm OBJECT-TYPE
+ SYNTAX INTEGER {
+ bridgingEnabled(0),
+ bridgingDisabled(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Ethernet Data traffic bridging is disabled because the
+ wireless link is not operating at the configured Lowest
+ Data Modulation Mode"
+ ::= { alarmInstancedTableEntry 4 }
+
+ maxLinkRangeExceeded OBJECT-TYPE
+ SYNTAX INTEGER {
+ maxLinkRangeOK(0),
+ maxLinkRangeExceeded(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The measured link range is greater than the maximum
+ allowed by the license key. The link will operate at a
+ reduced capacity while this condition applies. This alarm
+ is only raised if the license specifies a maximum link
+ range and the trial license is not active."
+ ::= { alarmInstancedTableEntry 5 }
+
+ portAllocationMismatch OBJECT-TYPE
+ SYNTAX INTEGER {
+ portAllocationOK(0),
+ mismatchinOutofBandRemoteManagementService(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The local and remote ODUs have different services
+ configured."
+ ::= { alarmInstancedTableEntry 6 }
+
+ wirelessLinkStatusAlarm OBJECT-TYPE
+ SYNTAX INTEGER {
+ up(0),
+ down(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Current status of the wireless link. A state of Up on a
+ green background indicates that a wireless link is
+ established"
+ ::= { alarmInstancedTableEntry 7 }
+
+ incompatibleRegulatoryBands OBJECT-TYPE
+ SYNTAX INTEGER {
+ regOK(0),
+ regIncompatibleLicenseKeys(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The master and slave units have incompatible regulatory
+ bands. NB: Both units must have compatible license keys"
+ ::= { alarmInstancedTableEntry 8 }
+
+ -- Apc group attribute definitions
+ --
+ atpcHcmpMasterTargetRxPower OBJECT-TYPE
+ SYNTAX INTEGER (-80..-30)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The target Rx power level (dBm) at the HCMP Master that
+ the HCMP Slaves try to reach by automatically adjusting
+ their transmit power. The same value must be set in both
+ the HCMP Master and Slaves as it used by the Slave to set
+ its transmit power accurately before the wireless link is
+ established."
+ ::= { apc 1 }
+
+ atpcHcmpMasterTxPower OBJECT-TYPE
+ SYNTAX INTEGER (-15..30)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This must be set to the same value as the Maximum
+ Transmit Power attribute on the HCMP Master. This is
+ required by the HCMP Slave for initial transmit power
+ estimation."
+ ::= { apc 2 }
+
+ -- Smtp group attribute definitions
+ --
+ sMTPEmailAlert OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Simple Mail Transfer Protocol is used to send equipment
+ alerts via email to a specified email address"
+ ::= { smtp 1 }
+
+ sMTPServerPortNumber OBJECT-TYPE
+ SYNTAX INTEGER (0..65535)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Port number of the SMTP server"
+ ::= { smtp 3 }
+
+ sMTPSourceEmailAddress OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..63))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The 'from' email address used when constructing the
+ automatically generated e-mail message"
+ ::= { smtp 4 }
+
+ sMTPDestinationEmailAddress OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..63))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The 'to' email address used when constructing the
+ automatically generated e-mail message"
+ ::= { smtp 5 }
+
+ sMTPEnabledMessages OBJECT-TYPE
+ SYNTAX BITS {
+ nIDULanPortUpDown(0),
+ sFPPortUpDown(1),
+ auxPortUpDown(2),
+ mainPSUPortUpDown(3),
+ enabledDiagnosticAlarms(4),
+ dFSImpulseInterference(5),
+ channelChange(6),
+ wirelessPortUpDown(7),
+ listenBeforeTalk(15)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This controls which SMTP messages the unit will send"
+ ::= { smtp 6 }
+
+ sMTPServerInternetAddressType OBJECT-TYPE
+ SYNTAX INTEGER {
+ unknown(0),
+ ipv4(1),
+ ipv6(2),
+ ipv4z(3),
+ ipv6z(4),
+ unknown6(5),
+ unknown7(6),
+ unknown8(7),
+ unknown9(8),
+ unknown10(9),
+ unknown11(10),
+ unknown12(11),
+ unknown13(12),
+ unknown14(13),
+ unknown15(14),
+ unknown16(15),
+ dns(16)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The type of Internet address specified by the associated
+ sMTPServerInternetAddress."
+ ::= { smtp 7 }
+
+ sMTPServerInternetAddress OBJECT-TYPE
+ SYNTAX InetAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Internet address of the SMTP server"
+ ::= { smtp 8 }
+
+ sMTPServerResolvedInternetAddress OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..63))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "IP Address of the SMTP Server."
+ ::= { smtp 9 }
+
+ -- SnmpControl group attribute definitions
+ --
+ sNMPPortNumber OBJECT-TYPE
+ SYNTAX INTEGER (0..65535)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The IP port number used to access the SNMP MIB (i.e.
+ Gets and Sets) (default = 161). NB: A system reboot is
+ required to activate changes to this attribute"
+ ::= { snmpControl 1 }
+
+ sNMPCommunityString OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..63))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The SNMP community string. NB: A system reboot is
+ required to activate changes to this attribute"
+ ::= { snmpControl 2 }
+
+ sNMPTrapTableNumber OBJECT-TYPE
+ SYNTAX INTEGER (2)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of entries in the sNMPTrapTable."
+ ::= { snmpControl 3 }
+
+ sNMPTrapVersion OBJECT-TYPE
+ SYNTAX INTEGER {
+ v1(0),
+ v2c(1)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The SNMP protocol version to use for SNMP Traps. NB: A
+ system reboot is required to activate changes to this
+ attribute"
+ ::= { snmpControl 5 }
+
+ sNMPEnabledTraps OBJECT-TYPE
+ SYNTAX BITS {
+ auxPortUpDown(0),
+ mainPSUPortUpDown(1),
+ authenticationFailure(2),
+ enabledDiagnosticAlarms(3),
+ dFSImpulseInterference(4),
+ channelChange(5),
+ wirelessPortUpDown(6),
+ coldStart(7),
+ listenBeforeTalk(13),
+ nIDULanPortUpDown(14),
+ sFPPortUpDown(15)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This controls which SNMP Traps the unit will send"
+ ::= { snmpControl 6 }
+
+ enabledDiagnosticAlarms OBJECT-TYPE
+ SYNTAX BITS {
+ portState(0),
+ incompatibleMasterAndSlave(1),
+ incompatibleRegulatoryBands(2),
+ maximumLinkRangeExceeded(3),
+ unitOutOfCalibration(4),
+ installArmState(5),
+ installStatus(6),
+ regulatoryBand(7),
+ syslogLocalWrapped(8),
+ syslogLocalNearlyFull(9),
+ syslogDisabledWarning(10),
+ linkModeOptimizationMismatch(11),
+ tDDSynchronizationAlarm(12),
+ wirelessLinkDisabledWarning(13),
+ sNTPSynchronizationFailed(14),
+ noWirelessChannelAvailable(15),
+ licenseSignatureLengthAlarm(16),
+ wirelessLinkStatus(17),
+ tDMAlarms(18),
+ capacityVariantMismatch(19),
+ remainingFullCapacityTrialTime(20),
+ dataBridgingStatus(21),
+ secureModeAlarm(22),
+ syslogClientDisabledWarning(23)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Controls which individual diagnostic alarms are enabled.
+ The unit may be configured to generate SNMP traps and/or
+ SMTP email alerts for these enabled alarms by selecting
+ 'Enabled Diagnostic Alarms' on the 'SNMP Enabled Traps'
+ and/or 'SMTP Enabled Messages' attributes"
+ ::= { snmpControl 7 }
+
+ sNMPSendAllTrapsAtStartup OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Controls whether cleared traps are reported at start-up
+ as well as raised traps. Only enabled traps will be
+ reported. NB: Traps corresponding to transient events
+ (i.e. not associated with an alarm or status value) are
+ only sent when required and not at start-up."
+ ::= { snmpControl 8 }
+
+ -- SNMPTrapTable group attribute definitions
+ --
+ sNMPTrapTableIndex OBJECT-TYPE
+ SYNTAX INTEGER (1..2)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "SNMP trap value, used to index the SNMPTrapTable."
+ ::= { sNMPTrapTableEntry 1 }
+
+ sNMPTrapPortNumber OBJECT-TYPE
+ SYNTAX INTEGER (0..65535)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Destination port for SNMP Traps (default=162). NB: A
+ system reboot is required to activate changes to this
+ attribute."
+ ::= { sNMPTrapTableEntry 3 }
+
+ sNMPTrapInternetAddressType OBJECT-TYPE
+ SYNTAX INTEGER {
+ unknown(0),
+ ipv4(1),
+ ipv6(2),
+ ipv4z(3),
+ ipv6z(4),
+ unknown6(5),
+ unknown7(6),
+ unknown8(7),
+ unknown9(8),
+ unknown10(9),
+ unknown11(10),
+ unknown12(11),
+ unknown13(12),
+ unknown14(13),
+ unknown15(14),
+ unknown16(15),
+ dns(16)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The type of Internet address specified by the associated
+ sNMPTrapInternetAddress."
+ ::= { sNMPTrapTableEntry 4 }
+
+ sNMPTrapInternetAddress OBJECT-TYPE
+ SYNTAX InetAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The Internet address to which all SNMP Traps are sent."
+ ::= { sNMPTrapTableEntry 5 }
+
+ sNMPTrapReceiverEnabled OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "A value of 0 disables the sending of SNMP trap to
+ corresponding receiver. A value of 1 enables the sending
+ of SNMP trap to corresponding receiver."
+ ::= { sNMPTrapTableEntry 6 }
+
+ sNMPTrapResolvedInternetAddress OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..127))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "IP Address(es) of the SNMP Trap Server."
+ ::= { sNMPTrapTableEntry 7 }
+
+ -- Sntp group attribute definitions
+ --
+ sNTPState OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "SNTP control state"
+ ::= { sntp 1 }
+
+ sNTPPollInterval OBJECT-TYPE
+ SYNTAX INTEGER (60..43200)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The SNTP server polling interval"
+ ::= { sntp 4 }
+
+ sNTPSync OBJECT-TYPE
+ SYNTAX INTEGER {
+ noSync(0),
+ inSync(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "If SNTP Sync fails then check the server settings in the
+ Remote Management page, or disable SNTP"
+ ::= { sntp 5 }
+
+ sNTPLastSync OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Last SNTP sync time"
+ ::= { sntp 6 }
+
+ systemClock OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "System clock presented as local time"
+ ::= { sntp 7 }
+
+ timeZone OBJECT-TYPE
+ SYNTAX INTEGER {
+ gmtMinus1200(0),
+ gmtMinus1130(1),
+ gmtMinus1100(2),
+ gmtMinus1030(3),
+ gmtMinus1000(4),
+ gmtMinus0930(5),
+ gmtMinus0900(6),
+ gmtMinus0830(7),
+ gmtMinus0800(8),
+ gmtMinus0730(9),
+ gmtMinus0700(10),
+ gmtMinus0630(11),
+ gmtMinus0600(12),
+ gmtMinus0530(13),
+ gmtMinus0500(14),
+ gmtMinus0430(15),
+ gmtMinus0400(16),
+ gmtMinus0330(17),
+ gmtMinus0300(18),
+ gmtMinus0230(19),
+ gmtMinus0200(20),
+ gmtMinus0130(21),
+ gmtMinus0100(22),
+ gmtMinus0030(23),
+ gmtZero(24),
+ gmtPlus0030(25),
+ gmtPlus0100(26),
+ gmtPlus0130(27),
+ gmtPlus0200(28),
+ gmtPlus0230(29),
+ gmtPlus0300(30),
+ gmtPlus0330(31),
+ gmtPlus0400(32),
+ gmtPlus0430(33),
+ gmtPlus0500(34),
+ gmtPlus0530(35),
+ gmtPlus0600(36),
+ gmtPlus0630(37),
+ gmtPlus0700(38),
+ gmtPlus0730(39),
+ gmtPlus0800(40),
+ gmtPlus0830(41),
+ gmtPlus0900(42),
+ gmtPlus0930(43),
+ gmtPlus1000(44),
+ gmtPlus1030(45),
+ gmtPlus1100(46),
+ gmtPlus1130(47),
+ gmtPlus1200(48),
+ gmtPlus1230(49),
+ gmtPlus1300(50)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Time zone offsets from Greenwich Mean Time (GMT)"
+ ::= { sntp 8 }
+
+ daylightSaving OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Daylight Saving Time"
+ ::= { sntp 9 }
+
+ sNTPPrimaryServer OBJECT-TYPE
+ SYNTAX INTEGER {
+ server1(0),
+ server2(1)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Specifies the primary SNTP server, determining the order
+ in which the servers are tried."
+ ::= { sntp 10 }
+
+ sNTPPrimaryServerDeadTime OBJECT-TYPE
+ SYNTAX INTEGER (0..86400)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Time (in seconds) to wait before retrying communications
+ with an unresponsive primary SNTP server. Setting the
+ value to 0 disables the timer."
+ ::= { sntp 11 }
+
+ sNTPServerRetries OBJECT-TYPE
+ SYNTAX INTEGER (0..10)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Number of times the device will retry after an SNTP
+ server fails to respond."
+ ::= { sntp 12 }
+
+ sNTPServerTimeout OBJECT-TYPE
+ SYNTAX INTEGER (1..15)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Time (in seconds) the device will wait for a response
+ from an SNTP server."
+ ::= { sntp 13 }
+
+ sNTPServerTableNumber OBJECT-TYPE
+ SYNTAX INTEGER (2)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of entries in the SNTPServerTable."
+ ::= { sntp 14 }
+
+ -- SNTPServerTable group attribute definitions
+ --
+ sNTPServerTableIndex OBJECT-TYPE
+ SYNTAX INTEGER (1..2)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Index range for the SNTPServerTable."
+ ::= { sNTPServerTableEntry 1 }
+
+ sNTPServerPortNumber OBJECT-TYPE
+ SYNTAX INTEGER (0..65535)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The IP port number of the SNTP server. Defaults to port
+ 123."
+ ::= { sNTPServerTableEntry 3 }
+
+ sNTPServerStatus OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..127))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Status message reflecting the result of communications
+ with the SNTP server when last polled"
+ ::= { sNTPServerTableEntry 4 }
+
+ sNTPServerInternetAddressType OBJECT-TYPE
+ SYNTAX INTEGER {
+ unknown(0),
+ ipv4(1),
+ ipv6(2),
+ ipv4z(3),
+ ipv6z(4),
+ unknown6(5),
+ unknown7(6),
+ unknown8(7),
+ unknown9(8),
+ unknown10(9),
+ unknown11(10),
+ unknown12(11),
+ unknown13(12),
+ unknown14(13),
+ unknown15(14),
+ unknown16(15),
+ dns(16)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The type of Internet address specified by the associated
+ sNTPServerInternetAddress."
+ ::= { sNTPServerTableEntry 5 }
+
+ sNTPServerInternetAddress OBJECT-TYPE
+ SYNTAX InetAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The Internet address of a valid SNTP server"
+ ::= { sNTPServerTableEntry 6 }
+
+ sNTPServerResolvedInternetAddress OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..63))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "IP Address of the SNTP Server."
+ ::= { sNTPServerTableEntry 7 }
+
+ sNTPServerAuthenticationProtocol OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(0),
+ mD5(1),
+ sHA1(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Authentication protocol to be used for this SNTP server.
+ Options are None (default) or MD5."
+ ::= { sNTPServerTableEntry 8 }
+
+ sNTPServerKeyIdentifier OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "SNTP key identifier. Note: Key 0 is reserved for testing
+ using the well-known key all zeroes."
+ ::= { sNTPServerTableEntry 9 }
+
+ -- Reset group attribute definitions
+ --
+ systemReset OBJECT-TYPE
+ SYNTAX INTEGER {
+ running(0),
+ consoleReboot(1)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Setting this attribute to '1' will cause a system
+ reboot. NB: a system reboot will apply any pending new
+ settings held in memory"
+ ::= { reset 1 }
+
+ -- Versions group attribute definitions
+ --
+ softwareVersion OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..63))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Current software version"
+ ::= { versions 1 }
+
+ hardwareVersion OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..63))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Hardware platform version"
+ ::= { versions 2 }
+
+ secondarySoftwareVersion OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..63))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Secondary software version, used when the primary
+ software image is invalid or erased"
+ ::= { versions 3 }
+
+ bootVersion OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..63))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Boot code software version"
+ ::= { versions 4 }
+
+ -- PubStats group attribute definitions
+ --
+ receiveDataRateLinked OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Average data rate over the last one second interval
+ (kbps)"
+ ::= { pubStats 1 }
+
+ transmitDataRateLinked OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Average data rate over the last one second interval
+ (kbps)"
+ ::= { pubStats 2 }
+
+ aggregateDataRateLinked OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Average data rate over the last one second interval
+ (kbps)"
+ ::= { pubStats 3 }
+
+ wirelessLinkAvailabilityLinked OBJECT-TYPE
+ SYNTAX INTEGER (0..1000000)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Link availability calculated since the last reset of the
+ system counters, as a percentage multiplied by 10000 to
+ give four decimal places of precision"
+ ::= { pubStats 4 }
+
+ wirelessLinkStatusLinked OBJECT-TYPE
+ SYNTAX INTEGER {
+ up(0),
+ registering(1),
+ searching(2),
+ acquiring(3),
+ radarCAC(4),
+ initialising(5)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Current status of the wireless link"
+ ::= { pubStats 5 }
+
+ byteErrorRatioLinked OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Reciprocal of the byte error ratio calculated since the
+ last reset of the system counters"
+ ::= { pubStats 6 }
+
+ receiveModulationModeDetailLinked OBJECT-TYPE
+ SYNTAX INTEGER {
+ runningAtMaximumReceiveMode(0),
+ runningAtUserConfiguredMaxModulationMode(1),
+ restrictedBecauseInstallationIsArmed(2),
+ restrictedBecauseOfByteErrorsOnTheWirelessLink(3),
+ restrictedBecauseTheLinkParametersAreUpdating(4),
+ restrictedBecauseChannelChangeIsInProgress(5),
+ restrictedDueToTheLowEthernetLinkSpeed(6),
+ runningAtMaximumReceiveModeForChannelBandwidth(7),
+ limitedByTheWirelessConditions(8),
+ restrictedBecauseFullCapabilityTrialLicenseExpired(9)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The reason for the current receive modulation mode"
+ ::= { pubStats 7 }
+
+ dataBridgingAvailabilityLinked OBJECT-TYPE
+ SYNTAX INTEGER (0..1000000)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Link availability bridging Ethernet Data traffic
+ calculated since the last reset of the system counters,
+ as a percentage multiplied by 10000 to give four decimal
+ places of precision"
+ ::= { pubStats 8 }
+
+ pubInstancedStatsTableNumber OBJECT-TYPE
+ SYNTAX INTEGER (1..8)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of entries in the pubInstancedStatsTable."
+ ::= { pubStats 9 }
+
+ -- PubInstancedStatsTable group attribute definitions
+ --
+ pubInstancedStatsTableIndex OBJECT-TYPE
+ SYNTAX INTEGER (1..8)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Used to index the pubInstancedStatsTable."
+ ::= { pubInstancedStatsTableEntry 1 }
+
+ receiveDataRate OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Histogram of the average link receive data rate. "
+ ::= { pubInstancedStatsTableEntry 2 }
+
+ transmitDataRate OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Histogram of the average link transmit data rate. "
+ ::= { pubInstancedStatsTableEntry 3 }
+
+ aggregateDataRate OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Histogram of the link aggregate data rate. "
+ ::= { pubInstancedStatsTableEntry 4 }
+
+ wirelessLinkAvailability OBJECT-TYPE
+ SYNTAX INTEGER (0..1000000)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Link availability calculated since the last reset of the
+ system counters"
+ ::= { pubInstancedStatsTableEntry 5 }
+
+ wirelessLinkStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ up(0),
+ registering(1),
+ searching(2),
+ acquiring(3),
+ radarCAC(4),
+ initialising(5)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Current status of the wireless link. A state of 'Up' on
+ a green background indicates that a wireless link is
+ established"
+ ::= { pubInstancedStatsTableEntry 6 }
+
+ receiveModulationModeDetail OBJECT-TYPE
+ SYNTAX INTEGER {
+ runningAtMaximumReceiveMode(0),
+ runningAtUserConfiguredMaxModulationMode(1),
+ restrictedBecauseInstallationIsArmed(2),
+ restrictedBecauseOfByteErrorsOnTheWirelessLink(3),
+ restrictedBecauseTheLinkParametersAreUpdating(4),
+ restrictedBecauseChannelChangeIsInProgress(5),
+ restrictedDueToTheLowEthernetLinkSpeed(6),
+ runningAtMaximumReceiveModeForChannelBandwidth(7),
+ limitedByTheWirelessConditions(8),
+ restrictedBecauseFullCapabilityTrialLicenseExpired(9),
+ acquiringLink(10)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A brief description of the reason for the current
+ receive modulation mode"
+ ::= { pubInstancedStatsTableEntry 7 }
+
+ dataBridgingAvailability OBJECT-TYPE
+ SYNTAX INTEGER (0..1000000)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Link availability for bridging Ethernet Data traffic
+ calculated since the last reset of the system counters"
+ ::= { pubInstancedStatsTableEntry 8 }
+
+ byteErrorRatio OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Reciprocal of the byte error ratio calculated since the
+ last reset of the system counters"
+ ::= { pubInstancedStatsTableEntry 9 }
+
+ wirelessOutEthernetOctets OBJECT-TYPE
+ SYNTAX Counter64
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Cumulative total of octets transmitted in data or
+ management service at the wireless interface. This
+ excludes wireless MAC headers, MAC management messages,
+ and Null bytes."
+ ::= { pubInstancedStatsTableEntry 10 }
+
+ wirelessOutAllOctets OBJECT-TYPE
+ SYNTAX Counter64
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Cumulative total of octets transmitted at the wireless
+ interface. This includes data service, management
+ service, wireless MAC headers, MAC management messages,
+ and Null bytes."
+ ::= { pubInstancedStatsTableEntry 11 }
+
+ wirelessOutOctets OBJECT-TYPE
+ SYNTAX Counter64
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Cumulative total of octets including wireless MAC
+ headers transmitted in data or management service at the
+ wireless interface. This excludes MAC management messages
+ and Null bytes."
+ ::= { pubInstancedStatsTableEntry 12 }
+
+ erroredSeconds OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "erroredSeconds count for any second period containing
+ one or more codeword errors since the last reset of the
+ system counters."
+ ::= { pubInstancedStatsTableEntry 13 }
+
+ severelyErroredSeconds OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "severelyErroredSeconds count for any second period
+ containing ten or more codeword errors since the last
+ reset of the system counters."
+ ::= { pubInstancedStatsTableEntry 14 }
+
+ unavailableSeconds OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "unavailableSeconds count for any second when Data
+ Bridging Status = Disabled since the last reset of the
+ system counters. Note erroredSeconds and
+ severelyErroredSeconds are not incremented when the link
+ is unavailable."
+ ::= { pubInstancedStatsTableEntry 15 }
+
+ -- Encryption group attribute definitions
+ --
+ encryptionAlgorithm OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(0),
+ pSKAES128bit(1),
+ pSKAES192bit(2),
+ pSKAES256bit(3),
+ tLSRSA(4),
+ tLSPSK128bit(5),
+ tLSPSK256bit(6)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Encryption Algorithm used by the wireless link. NB:
+ A system reboot is required to activate changes to this
+ attribute. NB: The same Encryption Algorithm must be
+ configured at BOTH ends of the link for it to function
+ correctly. TLS RSA Encryption Algorithm is not compatible
+ with Link Name access method."
+ ::= { encryption 1 }
+
+ tLSMinimumSecurityLevel OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(0),
+ aES128bitTLSRSA(1),
+ aES256bitTLSRSA(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The minimum level of security that is supported on the
+ device"
+ ::= { encryption 2 }
+
+ -- TDDControl group attribute definitions
+ --
+ tDDSynchronizationMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "TDD Synchronization Mode selection"
+ ::= { tDDControl 1 }
+
+ hCMPMaximumLinkRange OBJECT-TYPE
+ SYNTAX INTEGER (50..1000)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The maximum link range between the HCMP Master and any
+ HCMP Slave. The same value must be used on both the HCMP
+ Master and its Slaves."
+ ::= { tDDControl 2 }
+
+ maximumNumberOfSlaves OBJECT-TYPE
+ SYNTAX INTEGER (1..8)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The maximum number of HCMP Slaves that an HCMP Master
+ can simultaneously connect to. The same value has to be
+ used in both the HCMP Master and its Slaves."
+ ::= { tDDControl 3 }
+
+ hCMPLinkSymmetry OBJECT-TYPE
+ SYNTAX INTEGER {
+ symmetry4to1(0),
+ symmetry3to1(1),
+ symmetry2to1(2),
+ symmetry1to1(3),
+ symmetry1to2(4),
+ symmetry1to3(5),
+ symmetry1to4(6)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Provides configuration options for sharing the available
+ wireless capacity among all Slaves between the transmit
+ and receive directions. Option x to y is the ratio of
+ Total Downlink capacity to Total Uplink Capacity. The
+ same value has to be used in both the HCMP Master and its
+ Slaves."
+ ::= { tDDControl 4 }
+
+ -- AAAControl group attribute definitions
+ --
+ userTableNumber OBJECT-TYPE
+ SYNTAX INTEGER (1..10)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of entries in the userTable"
+ ::= { aAAControl 1 }
+
+ -- UserTable group attribute definitions
+ --
+ userTableIndex OBJECT-TYPE
+ SYNTAX INTEGER (1..10)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "used to index values in the userTable."
+ ::= { userTableEntry 1 }
+
+ userName OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..67))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "User name which must be entered, along with the
+ appropriate password, in order to gain access to the
+ system."
+ ::= { userTableEntry 2 }
+
+ userRole OBJECT-TYPE
+ SYNTAX INTEGER {
+ readOnly(0),
+ systemAdministrator(1),
+ securityOfficer(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Role of the selected user. A Security Officer has access
+ to and can modify all settings. A System Administrator
+ has access to and can modify all non-security settings. A
+ Read Only user can view settings, but cannot make any
+ changes."
+ ::= { userTableEntry 3 }
+
+ userEnabled OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Enable / Disable the selected user"
+ ::= { userTableEntry 4 }
+
+ userPassword OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..67))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "User password, which must be entered in order to gain
+ access to the system."
+ ::= { userTableEntry 5 }
+
+ -- SyslogControl group attribute definitions
+ --
+ syslogClient OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Enable or disable the syslog client"
+ ::= { syslogControl 1 }
+
+ syslogState OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The syslog service has been enabled or disabled"
+ ::= { syslogControl 2 }
+
+ -- RouterProtocols group attribute definitions
+ --
+ microwaveAdaptiveBandwidth OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Enable support of Microwave Adaptive Bandwidth Protocol.
+ MAB is disabled if link symmetry is configured as
+ Adaptive"
+ ::= { routerProtocols 1 }
+
+ mABNominalModulationMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ modAcquisition(0),
+ modBpsk63percent(1),
+ modQpsk63percentSingle(2),
+ modTransient1(3),
+ modQpsk87percentSingle(4),
+ modTransient2(5),
+ mod16qam63percentSingleA(6),
+ modTransient3(7),
+ mod16qam87percentSingle(8),
+ modTransient4(9),
+ mod64qam75percentSingle(10),
+ modTransient5(11),
+ mod64qam92percentSingle(12),
+ modTransient6(13),
+ mod256qam81percentSingle(14),
+ mod16qam63percentSingleB(15),
+ mod16qam63percentDual(16),
+ modTransient7(17),
+ mod16qam87percentDual(18),
+ modTransient8(19),
+ mod64qam75percentDual(20),
+ modTransient9(21),
+ mod64qam92percentDual(22),
+ modTransient10(23),
+ mod256qam81percentDual(24)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Nominal modulation mode is the desired modulation
+ mode. MAB VSM packets are generated when the current
+ modulation mode falls below the nominal modulation."
+ ::= { routerProtocols 2 }
+
+ mABTransmissionInterval OBJECT-TYPE
+ SYNTAX INTEGER {
+ transmissionInterval1s(0),
+ transmissionInterval10s(1),
+ transmissionInterval60s(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The minimum interval (in seconds) between successive MAB
+ vendor specific messages (VSM). These VSM are sent when
+ the current transmit capacity falls below the configured
+ MAB Nominal Modulation Mode."
+ ::= { routerProtocols 3 }
+
+ mABHoldoffPeriod OBJECT-TYPE
+ SYNTAX INTEGER (10..60)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The period (in seconds) over which transmit capacity is
+ averaged over to determine when the wireless link has
+ degraded"
+ ::= { routerProtocols 4 }
+
+ mABMaintenanceLevel OBJECT-TYPE
+ SYNTAX INTEGER (0..7)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Maintenance Levels (0-7) determines the destination MAC
+ address of MAB vendor specific messages."
+ ::= { routerProtocols 5 }
+
+ useVLANForMABProtocol OBJECT-TYPE
+ SYNTAX INTEGER {
+ noVLANTagging(0),
+ iEEE8021QTaggedCTagType8100(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This controls whether MAB vendor specific messages (VSM)
+ packets use VLAN tags or not."
+ ::= { routerProtocols 6 }
+
+ mABProtocolVID OBJECT-TYPE
+ SYNTAX INTEGER (0..4094)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This VLAN VID (0-4094) will be included in MAB vendor
+ specific messages (VSM) packets."
+ ::= { routerProtocols 7 }
+
+ mABProtocolVLANPriority OBJECT-TYPE
+ SYNTAX INTEGER (0..7)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This VLAN Priority (0-7) will be included in MAB vendor
+ specific messages (VSM) packets."
+ ::= { routerProtocols 8 }
+
+ mABState OBJECT-TYPE
+ SYNTAX INTEGER {
+ normal(0),
+ degraded(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Current state of MAB Protocol. A state of 'Normal' on a
+ green background indicates that a wireless link is
+ operating at nominal capacity"
+ ::= { routerProtocols 9 }
+
+ mABNominalTransmitCapacity OBJECT-TYPE
+ SYNTAX INTEGER (0..1000)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The nominal Tx capacity used in MAB Vendor Specific
+ Messages for the selected nominal modulation mode "
+ ::= { routerProtocols 10 }
+
+ mABCurrentTransmitCapacity OBJECT-TYPE
+ SYNTAX INTEGER (0..1000)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The current Tx capacity of the wireless link used in the
+ last MAB Vendor Specific Message transmitted."
+ ::= { routerProtocols 11 }
+
+ -- CableDiagnostics group attribute definitions
+ --
+ cableDiagnosticsPorts OBJECT-TYPE
+ SYNTAX BITS {
+ auxPort(6),
+ mainPSUPort(7)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Select ports on which Cable Diagnostics must be
+ executed"
+ ::= { cableDiagnostics 1 }
+
+ cableDiagnosticsControl OBJECT-TYPE
+ SYNTAX INTEGER {
+ startTest(0),
+ testInProgress(1)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Set this attribute to 'Test in Progress' to start a
+ Cable Diagnostics test"
+ ::= { cableDiagnostics 2 }
+
+ cableDiagnosticsWarning OBJECT-TYPE
+ SYNTAX INTEGER {
+ idle(0),
+ testInProgress(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Normal Ethernet operation is disrupted when a Cable
+ Diagnostics test is in progress"
+ ::= { cableDiagnostics 3 }
+
+ cableDiagnosticsResultTableNumber OBJECT-TYPE
+ SYNTAX INTEGER (1..2)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of rows in the Cable Diagnostics Result Table."
+ ::= { cableDiagnostics 4 }
+
+ -- CableDiagnosticsResultTable group attribute definitions
+ --
+ cableDiagnosticsResultTableIndex OBJECT-TYPE
+ SYNTAX INTEGER (1..2)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Cable Diagnostics Port value used to index into the
+ result table."
+ ::= { cableDiagnosticsResultTableEntry 1 }
+
+ cableDiagnosticsResultsDateTime OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Date and Time when a Cable Diagnostics test was last
+ executed"
+ ::= { cableDiagnosticsResultTableEntry 2 }
+
+ cableDiagPair1Results OBJECT-TYPE
+ SYNTAX INTEGER {
+ ok(0),
+ unknown(1),
+ inProgress(2),
+ notTested(3),
+ openCircuit(4),
+ shortCircuit(5)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The result of the most recent execution of Cable
+ Diagnostics on cable pair 1. According to the T658B
+ wiring scheme, pair 1 is pins 4 & 5 on the RJ45 socket on
+ the ODU. Open Circuit is reported when the impedance is
+ greater than 330 ohms. Short Circuit is reported when the
+ impedance is less than 33 ohms. Unknown is reported when
+ a continuous signal is received from the link partner for
+ 125 ms, preventing start of the test."
+ ::= { cableDiagnosticsResultTableEntry 3 }
+
+ cableDiagPair1Distance OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The distance in meters from the ODU to the fault
+ detected on the cable pair during the most recent
+ execution of Cable Diagnostics. Faults in cables longer
+ than 160 meters (525 feet) may not be detected. The error
+ margin is +/-2 meters (6.5 feet)."
+ ::= { cableDiagnosticsResultTableEntry 4 }
+
+ cableDiagPair2Results OBJECT-TYPE
+ SYNTAX INTEGER {
+ ok(0),
+ unknown(1),
+ inProgress(2),
+ notTested(3),
+ openCircuit(4),
+ shortCircuit(5)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The result of the most recent execution of Cable
+ Diagnostics on cable pair 2. According to the T658B
+ wiring scheme, pair 2 is pins 1 & 2 on the RJ45 socket on
+ the ODU. Open Circuit is reported when the impedance is
+ greater than 330 ohms. Short Circuit is reported when the
+ impedance is less than 33 ohms. Unknown is reported when
+ a continuous signal is received from the link partner for
+ 125 ms, preventing start of the test."
+ ::= { cableDiagnosticsResultTableEntry 5 }
+
+ cableDiagPair2Distance OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The distance in meters from the ODU to the fault
+ detected on the cable pair during the most recent
+ execution of Cable Diagnostics. Faults in cables longer
+ than 160 meters (525 feet) may not be detected. The error
+ margin is +/-2 meters (6.5 feet)."
+ ::= { cableDiagnosticsResultTableEntry 6 }
+
+ cableDiagPair3Results OBJECT-TYPE
+ SYNTAX INTEGER {
+ ok(0),
+ unknown(1),
+ inProgress(2),
+ notTested(3),
+ openCircuit(4),
+ shortCircuit(5)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The result of the most recent execution of Cable
+ Diagnostics on cable pair 3. According to the T658B
+ wiring scheme, pair 3 is pins 3 & 6 on the RJ45 socket on
+ the ODU. Open Circuit is reported when the impedance is
+ greater than 330 ohms. Short Circuit is reported when the
+ impedance is less than 33 ohms. Unknown is reported when
+ a continuous signal is received from the link partner for
+ 125 ms, preventing start of the test."
+ ::= { cableDiagnosticsResultTableEntry 7 }
+
+ cableDiagPair3Distance OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The distance in meters from the ODU to the fault
+ detected on the cable pair during the most recent
+ execution of Cable Diagnostics. Faults in cables longer
+ than 160 meters (525 feet) may not be detected. The error
+ margin is +/-2 meters (6.5 feet)."
+ ::= { cableDiagnosticsResultTableEntry 8 }
+
+ cableDiagPair4Results OBJECT-TYPE
+ SYNTAX INTEGER {
+ ok(0),
+ unknown(1),
+ inProgress(2),
+ notTested(3),
+ openCircuit(4),
+ shortCircuit(5)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The result of the most recent execution of Cable
+ Diagnostics on cable pair 4. According to the T658B
+ wiring scheme, pair 4 is pins 7 & 8 on the RJ45 socket on
+ the ODU. Open Circuit is reported when the impedance is
+ greater than 330 ohms. Short Circuit is reported when the
+ impedance is less than 33 ohms. Unknown is reported when
+ a continuous signal is received from the link partner for
+ 125 ms, preventing start of the test."
+ ::= { cableDiagnosticsResultTableEntry 9 }
+
+ cableDiagPair4Distance OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The distance in meters from the ODU to the fault
+ detected on the cable pair during the most recent
+ execution of Cable Diagnostics. Faults in cables longer
+ than 160 meters (525 feet) may not be detected. The error
+ margin is +/-2 meters (6.5 feet)."
+ ::= { cableDiagnosticsResultTableEntry 10 }
+
+ -- UnitIdentification group attribute definitions
+ --
+ deviceMACAddress OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(6))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Device MAC address"
+ ::= { unitIdentification 1 }
+
+ deviceESN OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..63))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The ESN assigned to this device"
+ ::= { unitIdentification 2 }
+
+ deviceMSN OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..63))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The MSN assigned to this device"
+ ::= { unitIdentification 3 }
+
+ -- AuthorizationControl group attribute definitions
+ --
+ authorizationControlTableNumber OBJECT-TYPE
+ SYNTAX INTEGER (1..32)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of entries in the AuthorizationControlTable."
+ ::= { authorizationControl 1 }
+
+ -- AuthorizationControlTable group attribute definitions
+ --
+ authorizationControlTableIndex OBJECT-TYPE
+ SYNTAX INTEGER (1..32)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Authorization Control Table Index"
+ ::= { authorizationControlTableEntry 1 }
+
+ whitelistRMMacAddress OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(6))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "MAC Address of Remote Modules."
+ ::= { authorizationControlTableEntry 2 }
+
+ whitelistRMEnabled OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Whether this Remote Module is enabled. Only Enabled
+ Remote Modules are allowed to connect to this device."
+ ::= { authorizationControlTableEntry 3 }
+
+ blacklistRMMacAddress OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(6))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "MAC Address of Remote Modules."
+ ::= { authorizationControlTableEntry 4 }
+
+ blacklistRMEnabled OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Whether this Remote Module is enabled. Only Enabled
+ Remote Modules are black listed; they cannot connect to
+ this ODU."
+ ::= { authorizationControlTableEntry 5 }
+
+ -- DNS group attribute definitions
+ --
+ dNSResolver OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Enable/Disable DNS Resolver."
+ ::= { dNS 1 }
+
+ dNSPrimaryServer OBJECT-TYPE
+ SYNTAX INTEGER {
+ server1(0),
+ server2(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Specifies the primary DNS server, determining the order
+ in which the servers are tried."
+ ::= { dNS 2 }
+
+ dNSServerTableNumber OBJECT-TYPE
+ SYNTAX INTEGER (2)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of entries in the DNSServerTable."
+ ::= { dNS 3 }
+
+ -- DNSServerTable group attribute definitions
+ --
+ dNSServerTableIndex OBJECT-TYPE
+ SYNTAX INTEGER (1..2)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Index range for the DNSServerTable."
+ ::= { dNSServerTableEntry 1 }
+
+ dNSServerInternetAddressType OBJECT-TYPE
+ SYNTAX INTEGER {
+ unknown(0),
+ ipv4(1),
+ ipv6(2),
+ ipv4z(3),
+ ipv6z(4),
+ unknown6(5),
+ unknown7(6),
+ unknown8(7),
+ unknown9(8),
+ unknown10(9),
+ unknown11(10),
+ unknown12(11),
+ unknown13(12),
+ unknown14(13),
+ unknown15(14),
+ unknown16(15),
+ dns(16)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The type of Internet address specified by the associated
+ dNSServerInternetAddress."
+ ::= { dNSServerTableEntry 2 }
+
+ dNSServerInternetAddress OBJECT-TYPE
+ SYNTAX InetAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "IP Address of the DNS Server which will be used to
+ resolve hostname into IP Addresses ."
+ ::= { dNSServerTableEntry 3 }
+
+ dNSServerPortNumber OBJECT-TYPE
+ SYNTAX INTEGER (2..65535)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "UDP Port Number of DNS Service on the Server."
+ ::= { dNSServerTableEntry 4 }
+
+ -- Supplementary group attribute definitions
+ --
+ longitude OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..19))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The longitude of the unit, measured in decimal degrees.
+ This object is set by the SNMP manager and has no
+ internal function."
+ ::= { supplementary 1 }
+
+ latitude OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..19))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The latitude of the unit, measured in decimal degrees.
+ This object is set by the SNMP manager and has no
+ internal function."
+ ::= { supplementary 2 }
+
+ altitude OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The altitude of the unit, measured in meters. This
+ object is set by the SNMP manager and has no internal
+ function."
+ ::= { supplementary 3 }
+
+ -- Enterprise NOTIFICATION definitions
+ --
+
+ channelChangeTrap NOTIFICATION-TYPE
+ OBJECTS { receiveChannel }
+ STATUS current
+ DESCRIPTION "The PTP radio has changed wireless channel.
+ This has been caused by either
+ i) mandatory radar avoidance,
+ a DFS impulsive interference event will also be
+ detected,
+ or
+ ii) Dynamic Spectrum Optimization, (DSO)
+ DSO improves link performance by selecting the
+ most appropriate transmit and receive channels
+ with the lowest level of interference."
+ ::= { ptpTrapPrefix 1 }
+
+ dfsImpulsiveInterferenceTrap NOTIFICATION-TYPE
+ OBJECTS { receiveChannel }
+ STATUS current
+ DESCRIPTION "DFS impulsive interference detected event"
+ ::= { ptpTrapPrefix 2 }
+
+ lbtDetectedTrap NOTIFICATION-TYPE
+ OBJECTS { receiveChannel }
+ STATUS current
+ DESCRIPTION "Listen-Before-Talk (LBT) detected event"
+ ::= { ptpTrapPrefix 46 }
+
+ mainPSUPortStatusTrap NOTIFICATION-TYPE
+ OBJECTS { mainPSUPortStatus }
+ STATUS current
+ DESCRIPTION
+ "Current status of the Main PSU Ethernet link. NB: a
+ change of state may generate an SNMP trap and/or SMTP
+ email alert"
+ ::= { ptpTrapPrefix 3 }
+
+ mainPSUPortDisabledWarningTrap NOTIFICATION-TYPE
+ OBJECTS { mainPSUPortDisabledWarning }
+ STATUS current
+ DESCRIPTION
+ "The SNMP ifAdminStatus of the interface has disabled
+ Ethernet traffic"
+ ::= { ptpTrapPrefix 4 }
+
+ mainPSUPortConfigurationMismatchTrap NOTIFICATION-TYPE
+ OBJECTS { mainPSUPortConfigurationMismatch }
+ STATUS current
+ DESCRIPTION
+ "The detection of Ethernet fragments (runt packets) when
+ the link is in full duplex is an indication of an
+ auto-negotiation or forced configuration mismatch"
+ ::= { ptpTrapPrefix 5 }
+
+ auxPortStatusTrap NOTIFICATION-TYPE
+ OBJECTS { auxPortStatus }
+ STATUS current
+ DESCRIPTION
+ "Current status of the Aux Ethernet link. NB: a change of
+ state may generate an SNMP trap and/or SMTP email alert"
+ ::= { ptpTrapPrefix 6 }
+
+ auxPortDisabledWarningTrap NOTIFICATION-TYPE
+ OBJECTS { auxPortDisabledWarning }
+ STATUS current
+ DESCRIPTION
+ "The SNMP ifAdminStatus of the interface has disabled
+ Ethernet traffic"
+ ::= { ptpTrapPrefix 7 }
+
+ regulatoryBandTrap NOTIFICATION-TYPE
+ OBJECTS { regulatoryBand }
+ STATUS current
+ DESCRIPTION
+ "The Regulatory Band prohibits the wireless unit from
+ operating outside the regulated limits. An invalid
+ Regulatory Band may be caused by a missing or incorrect
+ License Key, a corrupt MAC Address or an attempt to
+ configure a Regulatory Band not allowed by the License
+ Key or an execution of Reset Configuration. NB: a change
+ of state may generate an SNMP trap and/or SMTP email
+ alert."
+ ::= { ptpTrapPrefix 8 }
+
+ installStatusTrap NOTIFICATION-TYPE
+ OBJECTS { installStatus }
+ STATUS current
+ DESCRIPTION
+ "A non-zero value indicates that signalling was received
+ with the wrong MAC address or a mismatched link name. NB:
+ It is very unusual to detect this, because units with
+ mis-configured Target MAC Address will normally fail to
+ establish a wireless link. However, rare circumstances
+ may establish a partial wireless link and detect this
+ situation. NB: A non-zero value on start-up, or a change
+ of value during operation, may generate an SNMP trap
+ and/or SMTP email alert"
+ ::= { ptpTrapPrefix 9 }
+
+ installArmStateTrap NOTIFICATION-TYPE
+ OBJECTS { installArmState }
+ STATUS current
+ DESCRIPTION
+ "Indicates if the unit is being installed. NB: a change
+ of state may generate an SNMP trap and/or SMTP email
+ alert"
+ ::= { ptpTrapPrefix 10 }
+
+ unitOutOfCalibrationTrap NOTIFICATION-TYPE
+ OBJECTS { unitOutOfCalibration }
+ STATUS current
+ DESCRIPTION
+ "The unit is out of calibration"
+ ::= { ptpTrapPrefix 11 }
+
+ auxPortPowerOverEthernetOutputStatusTrap NOTIFICATION-TYPE
+ OBJECTS { auxPortPowerOverEthernetOutputStatus }
+ STATUS current
+ DESCRIPTION
+ "Current status of the Power Over Ethernet (PoE) output
+ of the Aux port"
+ ::= { ptpTrapPrefix 12 }
+
+ incompatibleRegulatoryBandsTrap NOTIFICATION-TYPE
+ OBJECTS { incompatibleRegulatoryBands, remoteMACAddress }
+ STATUS current
+ DESCRIPTION
+ "The master and slave units have incompatible regulatory
+ bands. NB: Both units must have compatible license keys"
+ ::= { ptpTrapPrefix 14 }
+
+ noWirelessChannelAvailableTrap NOTIFICATION-TYPE
+ OBJECTS { noWirelessChannelAvailable }
+ STATUS current
+ DESCRIPTION
+ "Spectrum Management was unable to locate a suitable
+ wireless channel to operate on"
+ ::= { ptpTrapPrefix 15 }
+
+ wirelessLinkDisabledWarningTrap NOTIFICATION-TYPE
+ OBJECTS { wirelessLinkDisabledWarning }
+ STATUS current
+ DESCRIPTION
+ "The SNMP ifAdminStatus of the wireless interface has
+ disabled wireless traffic"
+ ::= { ptpTrapPrefix 16 }
+
+ auxPortConfigurationMismatchTrap NOTIFICATION-TYPE
+ OBJECTS { auxPortConfigurationMismatch }
+ STATUS current
+ DESCRIPTION
+ "The detection of Ethernet fragments (runt packets) when
+ the link is in full duplex is an indication of an
+ auto-negotiation or forced configuration mismatch. This
+ alarm is only raised if an Out-of-Band Management Mode
+ has been configured."
+ ::= { ptpTrapPrefix 17 }
+
+ sFPErrorTrap NOTIFICATION-TYPE
+ OBJECTS { sFPError }
+ STATUS current
+ DESCRIPTION
+ "If the SFP link is not OK, there are five possible
+ causes: Either a SFP has been installed but the license
+ key does not include SFP fiber support, a fiber link
+ could not be established even though no LOS was detected
+ (i.e. an optical carrier was detected, which could be due
+ to a broken TX fiber, or because the link is disabled at
+ the fiber link partner), a fiber link could not be
+ established and LOS is detected (i.e. no optical carrier
+ is detected), the installed SFP is not supported or the
+ installed SFP failed to initialize correctly. NB: a
+ change of status may generate an SNMP trap and/or SMTP
+ email alert"
+ ::= { ptpTrapPrefix 18 }
+
+ sFPPortStatusTrap NOTIFICATION-TYPE
+ OBJECTS { sFPPortStatus }
+ STATUS current
+ DESCRIPTION
+ "Current status of the SFP Ethernet link. NB: a change of
+ state may generate an SNMP trap and/or SMTP email alert"
+ ::= { ptpTrapPrefix 19 }
+
+ incompatibleMasterAndSlaveTrap NOTIFICATION-TYPE
+ OBJECTS { incompatibleMasterAndSlave, remoteMACAddress }
+ STATUS current
+ DESCRIPTION
+ "A non-zero value indicates that the master and slave
+ ends of a link are different hardware products, or have
+ different software versions, or have different TDD Frame
+ Configuraton Modes (Standard/Expert) in HCMP topology.
+ NB: It is very unusual to detect this, because
+ incompatible units will normally fail to establish a
+ wireless link. However, some combinations may establish a
+ partial wireless link and detect this situation. NB: A
+ non-zero value may generate an SNMP trap and/or SMTP
+ email alert"
+ ::= { ptpTrapPrefix 20 }
+
+ sNTPSyncTrap NOTIFICATION-TYPE
+ OBJECTS { sNTPSync }
+ STATUS current
+ DESCRIPTION
+ "If SNTP Sync fails then check the server settings in the
+ Remote Management page, or disable SNTP"
+ ::= { ptpTrapPrefix 21 }
+
+ tDDSynchronizationAlarmTrap NOTIFICATION-TYPE
+ OBJECTS { tDDSynchronizationAlarm }
+ STATUS current
+ DESCRIPTION
+ "Not Synchronized indicates failure of the external
+ timing system for a period greater than the holdover
+ timer. TDD frame timing will have drifted, and this link
+ may cause interference with other links in a synchronized
+ network. Timing System Failure is an early warning,
+ indicating that 80% of the holdover period has expired."
+ ::= { ptpTrapPrefix 22 }
+
+ sFPPortDisabledWarningTrap NOTIFICATION-TYPE
+ OBJECTS { sFPPortDisabledWarning }
+ STATUS current
+ DESCRIPTION
+ "The SNMP ifAdminStatus of the interface has disabled
+ Ethernet traffic"
+ ::= { ptpTrapPrefix 23 }
+
+ sFPPortConfigurationMismatchTrap NOTIFICATION-TYPE
+ OBJECTS { sFPPortConfigurationMismatch }
+ STATUS current
+ DESCRIPTION
+ "The detection of Ethernet fragments (runt packets) when
+ the link is in full duplex is an indication of an
+ auto-negotiation or forced configuration mismatch. This
+ alarm is only raised if an Out-of-Band Management Mode
+ has been configured."
+ ::= { ptpTrapPrefix 24 }
+
+ linkModeOptimizationMismatchTrap NOTIFICATION-TYPE
+ OBJECTS { linkModeOptimizationMismatch, remoteMACAddress }
+ STATUS current
+ DESCRIPTION
+ "The remote node of this link has been configured with a
+ different link mode optimization"
+ ::= { ptpTrapPrefix 25 }
+
+ tDMInterfaceStatusTrap NOTIFICATION-TYPE
+ OBJECTS { tDMInterfaceStatus }
+ STATUS current
+ DESCRIPTION
+ "@Current status of the connection to the TDM Box. A
+ state of 'Up' on a green background indicates that the
+ TDM Box is connected OK. When connecting a TDM Box only
+ the Main Ethernet port should be used"
+ ::= { ptpTrapPrefix 26 }
+
+ tDMChannelStatusTrap NOTIFICATION-TYPE
+ OBJECTS { tDMChannelStatus }
+ STATUS current
+ DESCRIPTION
+ "Current status of the TDM channels. A value of 0
+ indicates that a TDM channel is established"
+ ::= { ptpTrapPrefix 27 }
+
+ tDMChannelLoopbackTrap NOTIFICATION-TYPE
+ OBJECTS { tDMChannelLoopback }
+ STATUS current
+ DESCRIPTION
+ "The loopback status of TDM channels. This is intended
+ for installation testing and should be set to 'None' for
+ normal operation. The wire connections to a unit can be
+ tested by applying a 'Copper' loopback to the local unit.
+ The wireless connection to the remote unit can be tested
+ by applying a 'Wireless' loopback to the remote unit with
+ no loopback on the local unit. NB: a change of state may
+ generate an SNMP trap and/or SMTP email alert"
+ ::= { ptpTrapPrefix 28 }
+
+ nIDULanPortStatusTrap NOTIFICATION-TYPE
+ OBJECTS { nIDULanPortStatus }
+ STATUS current
+ DESCRIPTION
+ "Current status of the NIDU LAN Ethernet link. NB: a
+ change of state may generate an SNMP trap and/or SMTP
+ email alert"
+ ::= { ptpTrapPrefix 29 }
+
+ syslogStateTrap NOTIFICATION-TYPE
+ OBJECTS { syslogState }
+ STATUS current
+ DESCRIPTION
+ "The syslog service has been enabled or disabled"
+ ::= { ptpTrapPrefix 30 }
+
+ syslogLocalNearlyFullTrap NOTIFICATION-TYPE
+ STATUS current
+ DESCRIPTION "The syslog local log is nearly full (90%)"
+ ::= { ptpTrapPrefix 31 }
+
+ syslogLocalWrappedTrap NOTIFICATION-TYPE
+ STATUS current
+ DESCRIPTION "The syslog local log has wrapped"
+ ::= { ptpTrapPrefix 32 }
+
+ syslogClientTrap NOTIFICATION-TYPE
+ OBJECTS { syslogClient }
+ STATUS current
+ DESCRIPTION
+ "Enable or disable the syslog client"
+ ::= { ptpTrapPrefix 33 }
+
+ secureModeAlarmTrap NOTIFICATION-TYPE
+ OBJECTS { secureModeAlarm }
+ STATUS current
+ DESCRIPTION
+ "The secure mode (e.g. FIPS, UC-APL) state of the unit.
+ The secure mode is not configured(1) state indicates that
+ the unit is capable of secure mode operation, and one or
+ more of the following security materials has not been
+ configured: Key Of Keys, Private Key, Public Certificate,
+ DRNG Entropy Status, Wireless Encryption Key. The secure
+ mode mode is configured but not active(2) state indicates
+ that the unit is capable of secure mode operation, and
+ the security material has been configured, but the
+ configuration of interfaces is not consistent with secure
+ mode operation. The secure mode is not supported(3) state
+ indicates that the unit is not capable of secure mode
+ operation. The secure mode capability requires
+ appropriate hardware compatibility, license key and
+ software image."
+ ::= { ptpTrapPrefix 34 }
+
+ dataBridgingStatusAlarmTrap NOTIFICATION-TYPE
+ OBJECTS { dataBridgingStatusAlarm, remoteMACAddress }
+ STATUS current
+ DESCRIPTION
+ "Ethernet Data traffic bridging is disabled because the
+ wireless link is not operating at the configured Lowest
+ Data Modulation Mode"
+ ::= { ptpTrapPrefix 35 }
+
+ licenseRemainingTrialPeriodAlarmTrap NOTIFICATION-TYPE
+ OBJECTS { licenseRemainingTrialPeriodAlarm }
+ STATUS current
+ DESCRIPTION
+ "If the full capability trial license period is about to
+ expire then purchase a license upgrade from your
+ reseller."
+ ::= { ptpTrapPrefix 36 }
+
+ capacityVariantMismatchTrap NOTIFICATION-TYPE
+ OBJECTS { capacityVariantMismatch }
+ STATUS current
+ DESCRIPTION
+ "The remote node of this link has a lower link capacity.
+ Operating with a reduced effective link capacity."
+ ::= { ptpTrapPrefix 37 }
+
+ maxLinkRangeExceededTrap NOTIFICATION-TYPE
+ OBJECTS { maxLinkRangeExceeded, remoteMACAddress }
+ STATUS current
+ DESCRIPTION
+ "The measured link range is greater than the maximum
+ allowed by the license key. The link will operate at a
+ reduced capacity while this condition applies. This alarm
+ is only raised if the license specifies a maximum link
+ range and the trial license is not active."
+ ::= { ptpTrapPrefix 38 }
+
+ tDMConfigurationMismatchTrap NOTIFICATION-TYPE
+ OBJECTS { tDMConfigurationMismatch }
+ STATUS current
+ DESCRIPTION
+ "Current status of the configuration of the TDM Box. A
+ state of 'Ok' on a green background indicates that the
+ TDM Box configuration is matched OK with the remote end."
+ ::= { ptpTrapPrefix 39 }
+
+ nIDULanPortDisabledWarningTrap NOTIFICATION-TYPE
+ OBJECTS { nIDULanPortDisabledWarning }
+ STATUS current
+ DESCRIPTION
+ "The SNMP ifAdminStatus of the interface has disabled
+ Ethernet traffic"
+ ::= { ptpTrapPrefix 40 }
+
+ nIDULanPortConfigurationMismatchTrap NOTIFICATION-TYPE
+ OBJECTS { nIDULanPortConfigurationMismatch }
+ STATUS current
+ DESCRIPTION
+ "The detection of Ethernet fragments (runt packets) when
+ the link is in full duplex is an indication of an
+ auto-negotiation or forced configuration mismatch."
+ ::= { ptpTrapPrefix 41 }
+
+ portAllocationMismatchTrap NOTIFICATION-TYPE
+ OBJECTS { portAllocationMismatch, remoteMACAddress }
+ STATUS current
+ DESCRIPTION
+ "The local and remote ODUs have different services
+ configured."
+ ::= { ptpTrapPrefix 44 }
+
+ wirelessLinkStatusAlarmTrap NOTIFICATION-TYPE
+ OBJECTS { wirelessLinkStatusAlarm, remoteMACAddress }
+ STATUS current
+ DESCRIPTION
+ "Current status of the wireless link. A state of Up on a
+ green background indicates that a wireless link is
+ established"
+ ::= { ptpTrapPrefix 45 }
+
+ secureLicenseSignatureAlarmTrap NOTIFICATION-TYPE
+ OBJECTS { secureLicenseSignatureAlarm }
+ STATUS current
+ DESCRIPTION
+ "Alarm condition indicates that the unit's license is not
+ secure enough for FIPS approved mode."
+ ::= { ptpTrapPrefix 47 }
+
+ END
|