diff options
Diffstat (limited to 'MIBS/calix/OCCAM-ETHERLIKE-MIB')
| -rw-r--r-- | MIBS/calix/OCCAM-ETHERLIKE-MIB | 219 |
1 files changed, 219 insertions, 0 deletions
diff --git a/MIBS/calix/OCCAM-ETHERLIKE-MIB b/MIBS/calix/OCCAM-ETHERLIKE-MIB new file mode 100644 index 0000000..fe3a9a7 --- /dev/null +++ b/MIBS/calix/OCCAM-ETHERLIKE-MIB @@ -0,0 +1,219 @@ +--This MIB has been extrcted from RFC 2665 +OCCAM-ETHERLIKE-MIB DEFINITIONS ::= BEGIN + IMPORTS + occamGenericEtherlikeModules, occamGenericInterfaceModules + FROM OCCAM-REG-MODULE + MODULE-COMPLIANCE, OBJECT-GROUP + FROM SNMPv2-CONF + ifIndex, InterfaceIndex + FROM IF-MIB + MODULE-IDENTITY, OBJECT-TYPE, OBJECT-IDENTITY, Counter32, + mib-2, transmission, enterprises + FROM SNMPv2-SMI; + + etherMIB MODULE-IDENTITY + LAST-UPDATED "200104271051Z" + ORGANIZATION "Occam Networks" + CONTACT-INFO "email support@occamnetworks.com" + + DESCRIPTION + "The MIB module to describe generic + objects for Ethernet-like network + interfaces. + + The following reference is used + throughout this MIB module: + + [IEEE 802.3 Std] refers to: + IEEE Std 802.3, 1998 Edition:'Information + technology - Telecommunications and + information exchange between systems - + Local and metropolitan area networks - + Specific requirements - Part 3: Carrier + sense multiple access with collision + detection (CSMA/CD) access method and + physical layer specifications', + September 1998. + + Of particular interest is Clause 30, + '10Mb/s,100Mb/s and 1000Mb/s Management'." + + REVISION "200104271051Z" + DESCRIPTION "MODULE-IDENTITY update." + + REVISION "9908240400Z" + DESCRIPTION "Updated to include support for 1000 Mb/sec + interfaces and full-duplex interfaces. + This version published as RFC 2665." + REVISION "9806032150Z" + DESCRIPTION + "Updated to include support for 100 Mb/sec + interfaces. + This version published as RFC 2358." + REVISION "9402030400Z" + DESCRIPTION + "Initial version, published as RFC 1650." + ::= { occamGenericEtherlikeModules 1 } + + org OBJECT IDENTIFIER + ::= { iso 3 } + + dod OBJECT IDENTIFIER + ::= { org 6 } + + internet OBJECT IDENTIFIER + ::= { dod 1 } + + mgmt OBJECT IDENTIFIER + ::= { internet 2 } + + + etherMIBObjects OBJECT IDENTIFIER + ::= { etherMIB 1 } + + dot3 OBJECT IDENTIFIER ::= { etherMIBObjects 7 } + + +-- conformance information +-- placeholders + + etherConformance OBJECT IDENTIFIER + ::= { etherMIB 2 } + + +-- the Ethernet-like Statistics group + dot3StatsTable OBJECT-TYPE + SYNTAX SEQUENCE OF Dot3StatsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Statistics for a collection of ethernet-like + interfaces attached to a particular system. + There will be one row in this table for each + ethernet-like interface in the system." + ::= { dot3 2 } + + dot3StatsEntry OBJECT-TYPE + SYNTAX Dot3StatsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Statistics for a particular interface to an + ethernet-like medium." + INDEX { dot3StatsIndex } + ::= { dot3StatsTable 1 } + + Dot3StatsEntry ::= SEQUENCE { + dot3StatsIndex InterfaceIndex, + dot3StatsSingleCollisionFrames Counter32, + dot3StatsFrameTooLongs Counter32 + } + + + dot3StatsIndex OBJECT-TYPE + SYNTAX InterfaceIndex + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "An index value that uniquely identifies + an interface to an ethernet-like medium. + The interface identified by a particular + value of this index is the same interface + as identified by the same value of + ifIndex." + REFERENCE "RFC 2233, ifIndex" + ::= { dot3StatsEntry 1 } + + + +-- dot3StatsAlignmentErrors { dot3StatsEntry 2 } +-- dot3StatsFCSErrors { dot3StatsEntry 3 } + + dot3StatsSingleCollisionFrames OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A count of successfully transmitted frames on + a particular interface for which transmission + is inhibited by exactly one collision. + + A frame that is counted by an instance of this + object is also counted by the corresponding + instance of either the ifOutUcastPkts, + ifOutMulticastPkts, or ifOutBroadcastPkts, + and is not counted by the corresponding + instance of the dot3StatsMultipleCollisionFrames + object. + + This counter does not increment when the + interface is operating in full-duplex mode. + + Discontinuities in the value of this counter can + occur at re-initialization of the management + system, and at other times as indicated by the + value of ifCounterDiscontinuityTime." + REFERENCE "[IEEE 802.3 Std.], 30.3.1.1.3,
+ aSingleCollisionFrames." + ::= { dot3StatsEntry 4 } + + + +-- dot3StatsMultipleCollisionFrames { dot3StatsEntry 5 } +-- dot3StatsSQETestErrors { dot3StatsEntry 6 } +-- dot3StatsDeferredTransmissions { dot3StatsEntry 7 } +-- dot3StatsLateCollisions { dot3StatsEntry 8 } +-- dot3StatsExcessiveCollisions { dot3StatsEntry 9 } +-- dot3StatsInternalMacTransmitErrors { dot3StatsEntry 10 } +-- dot3StatsCarrierSenseErrors { dot3StatsEntry 11 } +-- { dot3StatsEntry 12 } is not assigned
+ + dot3StatsFrameTooLongs OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A count of frames received on a particular + interface that exceed the maximum permitted + frame size. + + The count represented by an instance of this + object is incremented when the frameTooLong + status is returned by the MAC service to the + LLC (or other MAC user). Received frames for + which multiple error conditions obtain are, + according to the conventions of IEEE 802.3 + Layer Management, counted exclusively according + to the error status presented to the LLC. + + Discontinuities in the value of this counter can + occur at re-initialization of the management + system, and at other times as indicated by the + value of ifCounterDiscontinuityTime." + REFERENCE "[IEEE 802.3 Std.], 30.3.1.1.25,
+ aFrameTooLongErrors." + ::= { dot3StatsEntry 13 } + + +-- { dot3StatsEntry 14 } is not assigned
+-- { dot3StatsEntry 15 } is not assigned
+-- dot3StatsInternalMacReceiveErrors { dot3StatsEntry 16 } +-- dot3StatsEtherChipSet { dot3StatsEntry 17 } +-- dot3StatsSymbolErrors { dot3StatsEntry 18 } +-- dot3StatsDuplexStatus { dot3StatsEntry 19 } +-- 802.3 Tests +-- serves as placeHolders + + dot3Tests OBJECT IDENTIFIER + ::= { dot3 6 } + + dot3Errors OBJECT IDENTIFIER + ::= { dot3 7 } + + etherGroups OBJECT IDENTIFIER + ::= { etherConformance 1 } + + etherCompliances OBJECT IDENTIFIER + ::= { etherConformance 2 } + +END |