diff options
Diffstat (limited to 'MIBS/calix/E5-110-MIB')
| -rw-r--r-- | MIBS/calix/E5-110-MIB | 7926 |
1 files changed, 7926 insertions, 0 deletions
diff --git a/MIBS/calix/E5-110-MIB b/MIBS/calix/E5-110-MIB new file mode 100644 index 0000000..79d446a --- /dev/null +++ b/MIBS/calix/E5-110-MIB @@ -0,0 +1,7926 @@ +-- $Log: E5-110-MIB.mib $ +-- Revision 1.43 2011/01/25 13:33:29 cylien +-- Revision 1.42 2010/11/12 06:27:45 DavidGong +-- Revision 1.41 2010/10/18 06:23:51 cylien +-- Revision 1.40 2010/09/08 07:07:27 Alex.Shih +-- Revision 1.39 2010/09/01 06:56:00 cylien +-- Revision 1.38 2010/08/27 08:04:37 Alex.Shih +-- Revision 1.37 2010/08/24 11:29:14 davidgong +-- Revision 1.36 2010/08/23 10:00:23 davidgong +-- Revision 1.35 2010/08/19 08:12:03 Alex.Shih +-- Revision 1.34 2010/08/19 06:41:33 davidgong +-- Revision 1.33 2010/08/18 06:54:57 davidgong +-- Revision 1.32 2010/07/21 03:30:35 Alex.Shih +-- Revision 1.31 2010/07/09 11:08:59 Alex.Shih +-- Revision 1.29 2010/05/04 10:02:46 cylien +-- Revision 1.28 2010/04/23 10:46:21 maverick +-- Revision 1.27 2010/04/23 09:14:33 Ives +-- Revision 1.26 2010/04/23 08:27:24 cylien +-- Revision 1.25 2010/03/29 02:05:57 maverick +-- Revision 1.24 2009/12/03 10:55:05 maverick +-- Revision 1.23 2009/11/30 01:14:34 maverick +-- Revision 1.22 2009/11/27 13:19:32 maverick +-- Revision 1.21 2009/11/26 13:06:53 maverick +-- add comment to obsoleted mib entries, mibble checked +-- Revision 1.20 2009/11/23 06:51:50 maverick +-- Revision 1.19 2009/11/06 02:10:37 maverick +-- remove cfm, change atmqos to ipqos +-- Revision 1.18 2009/10/26 02:39:01 maverick +-- Revision 1.17 2009/10/19 10:32:53 maverick +-- Revision 1.16 2009/09/16 02:55:29 niceguy +-- Revision 1.15 2009/09/15 05:51:27 maverick +-- Revision 1.14 2009/09/04 11:06:57 maverick +-- Revision 1.13 2009/09/01 01:32:32 maverick +-- Revision 1.12 2009/06/03 08:43:22 niceguy +-- Revision 1.11 2009/05/08 10:18:25 niceguy +-- Revision 1.10 2009/03/23 11:53:55 niceguy +-- Revision 1.9 2009/03/18 02:16:23 niceguy +-- Revision 1.8 2009/03/17 09:43:04 niceguy +-- Revision 1.7 2009/03/17 08:05:06 niceguy +-- Revision 1.6 2009/03/12 11:01:04 niceguy +-- Revision 1.5 2009/03/12 03:32:03 niceguy +-- Revision 1.4 2009/03/10 11:02:50 niceguy +-- Revision 1.3 2009/03/09 00:58:46 niceguy +-- Revision 1.2 2008/11/12 08:19:33 kenny +-- Revision 1.1 2008/07/11 09:36:12 maverick +-- Initial revision +-- Revision 1.8 2008/06/30 07:43:20 maverick +-- Revision 1.7 2008/04/28 02:29:16 maverick +-- Revision 1.6 2008/03/07 07:56:43 kenny +-- Revision 1.5 2007/12/14 10:00:11 niceguy +-- Revision 1.4 2007/12/14 02:42:41 niceguy +-- Revision 1.3 2007/12/06 02:03:04 kenny +-- Revision 1.2 2007/12/03 01:54:35 niceguy +-- Revision 1.1 2007/12/03 01:45:30 niceguy +-- Initial revision +-- Initial revision + + + E5-110-MIB DEFINITIONS ::= BEGIN + + IMPORTS + + enterprises + FROM RFC1155-SMI + OBJECT-TYPE, Counter32, Gauge32, Unsigned32, Counter64, IpAddress, TimeTicks, NOTIFICATION-TYPE + FROM SNMPv2-SMI + DisplayString, PhysAddress, ifIndex + FROM RFC1213-MIB + RowStatus, TEXTUAL-CONVENTION + FROM SNMPv2-TC + VlanIndex, PortList, dot1qVlanIndex + FROM Q-BRIDGE-MIB + dot1dTrafficClass + FROM P-BRIDGE-MIB + MacAddress, Timeout, BridgeId, dot1dBasePort + FROM BRIDGE-MIB; +-- dot1agCfmMdMdLevel, dot1agCfmVlanPrimaryVid, dot1agCfmMepIdentifier +-- FROM IEEE8021-CFMD8-MIB; + + + calixNetworks OBJECT IDENTIFIER ::= { enterprises 6321 } + calixRegistrations OBJECT IDENTIFIER ::= { calixNetworks 1 } + calixProducts OBJECT IDENTIFIER ::= { calixRegistrations 2 } + e5x100 OBJECT IDENTIFIER ::= { calixProducts 3 } + e5x110 OBJECT IDENTIFIER ::= { e5x100 1 } + + + + alarmconf OBJECT IDENTIFIER ::= { e5x110 2 } + diagnostic OBJECT IDENTIFIER ::= { e5x110 4 } + multicast OBJECT IDENTIFIER ::= { e5x110 7 } + port OBJECT IDENTIFIER ::= { e5x110 8 } + switch OBJECT IDENTIFIER ::= { e5x110 10 } + sys OBJECT IDENTIFIER ::= { e5x110 11 } + trap OBJECT IDENTIFIER ::= { e5x110 12 } + statistics OBJECT IDENTIFIER ::= { e5x110 13 } + clear OBJECT IDENTIFIER ::= { e5x110 14 } + aesSeriesCommon OBJECT IDENTIFIER ::= { e5x110 97 } + iesSeriesCommon OBJECT IDENTIFIER ::= { e5x110 98 } + accessSwitchCommonATM OBJECT IDENTIFIER ::= { e5x110 99 } + + + +---------------------------------------- +-- alarmconf +---------------------------------------- + + alarmOps OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The manager sets the corresponding bit value to 1 to start the operation + and the agent clears the object to zero when the operation is successfully completed. + The various bit positions are: + BIT 1: clear + BIT 2: cutoff" + ::= { alarmconf 1 } + +-- Alarm Conf Table + + alarmConfTable OBJECT-TYPE + SYNTAX SEQUENCE OF AlarmConfEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table includes alarm configuration." + ::= { alarmconf 2 } + + alarmConfEntry OBJECT-TYPE + SYNTAX AlarmConfEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in alarmConfTable." + INDEX { alarmConfId } + ::= { alarmConfTable 1 } + + AlarmConfEntry ::= + SEQUENCE { + alarmConfId INTEGER, + alarmConfFacility INTEGER, + alarmConfTarget INTEGER, + alarmConfSeverity INTEGER, + alarmConfClearable INTEGER + } + + alarmConfId OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + 5000:adslLine_up + 5001:adslLine_down + 5002:adslPerf_lol_thresh + 5003:adslPerf_lof_thresh + 5004:adslPerf_los_thresh + 5005:adslPerf_lop_thresh + 5006:adslPerf_es_thresh + 5007:adslPerf_ses_thresh + 5008:adslPerf_uas_thresh + 5009:adslAtuc_loftrap + 5010:adslAtuc_lostrap + 5011:adslAtur_loftrap + 5012:adslAtur_lostrap + 5013:adslAtur_lprtrap + 5014:ad_dhcp_rt_full + 5015:ad_dhcp_dm_conflict + 5016:ad_dhcp_entry_full + 5017:ad_dhcp_ip_dup + 5018:ad_dhcp_mac_dup + 10000:eqptVol_err + 10001:eqptEqpttemp_err + 10002:eqptFan_err + 10003:eqptHw_rtc_fail + 10004:eqptHw_mon_fail + 10005:eqptCold_start + 10006:eqptWarm_start + 10007:eqptAlm_input + 10008:eqptI2c_err + 10009:eqptAlm_input2 + 10010:eqptAlm_input3 + 15000:sysReboot + 15001:sysAco + 15002:sysAlm_clear + 15003:sysLogin_fail + 15004:sysAnti_spoofing + 15005:sysAlm_svrty_change + 20000:enetUp + 20001:enetDown + " + ::= { alarmConfEntry 1 } + + alarmConfFacility OBJECT-TYPE + SYNTAX INTEGER { + local1(1), + local2(2), + local3(3), + local4(4), + local5(5), + local6(6), + local7(7) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Alarm facility." + ::= { alarmConfEntry 2 } + + alarmConfTarget OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The destination which alarms are reported to. Set the bit to 1 to enable the target. + BIT 1: snmp trap + BIT 2: syslog" + ::= { alarmConfEntry 3 } + + alarmConfSeverity OBJECT-TYPE + SYNTAX INTEGER { + critical(1), + major(2), + minor(3), + info(4) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Alarm severity" + ::= { alarmConfEntry 4 } + + alarmConfClearable OBJECT-TYPE + SYNTAX INTEGER { + clearable(1), + unclearable(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Setting the object to one indicates that the alarm is to be cleared when user submits alarm clear." + ::= { alarmConfEntry 5 } + +-- Alarm Current Table + + alarmCurrTable OBJECT-TYPE + SYNTAX SEQUENCE OF AlarmCurrEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table includes current alarm information." + ::= { alarmconf 3 } + + alarmCurrEntry OBJECT-TYPE + SYNTAX AlarmCurrEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in alarmCurrTable." + INDEX { alarmCurrIndex } + ::= { alarmCurrTable 1 } + + AlarmCurrEntry ::= + SEQUENCE { + alarmCurrIndex INTEGER, + alarmCurrOccurTime TimeTicks, + alarmCurrTrapOid OBJECT IDENTIFIER, + alarmCurrParam1 INTEGER, + alarmCurrParam2 INTEGER, + alarmCurrParam3 INTEGER, + alarmCurrParam4 INTEGER, + alarmCurrParam5 INTEGER, + alarmCurrParam6 INTEGER, + alarmCurrParam7 INTEGER, + alarmCurrParam8 INTEGER, + alarmCurrTimeDescr DisplayString, + alarmCurrSeverity INTEGER, + alarmCurrDescr DisplayString + } + + alarmCurrIndex OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Index of the alarm." + ::= { alarmCurrEntry 1 } + + alarmCurrOccurTime OBJECT-TYPE + SYNTAX TimeTicks + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Alarm occurence time (in hundredths of a second) since the system was last re-initialized." + ::= { alarmCurrEntry 2 } + + alarmCurrTrapOid OBJECT-TYPE + SYNTAX OBJECT IDENTIFIER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Trap OID of the alarm." + ::= { alarmCurrEntry 3 } + + alarmCurrParam1 OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The 1st parameter of the alarm." + ::= { alarmCurrEntry 4 } + + alarmCurrParam2 OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The 2nd parameter of the alarm." + ::= { alarmCurrEntry 5 } + + alarmCurrParam3 OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The 3rd parameter of the alarm." + ::= { alarmCurrEntry 6 } + + alarmCurrParam4 OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The 4th parameter of the alarm." + ::= { alarmCurrEntry 7 } + + alarmCurrParam5 OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The 5th parameter of the alarm." + ::= { alarmCurrEntry 8 } + + alarmCurrParam6 OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The 6th parameter of the alarm." + ::= { alarmCurrEntry 9 } + + alarmCurrParam7 OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The 7th parameter of the alarm." + ::= { alarmCurrEntry 10 } + + alarmCurrParam8 OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The 8th parameter of the alarm." + ::= { alarmCurrEntry 11 } + + alarmCurrTimeDescr OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The string representation of occurence time (YYYY/MM/DD HH:MM:SS)." + ::= { alarmCurrEntry 12 } + + alarmCurrSeverity OBJECT-TYPE + SYNTAX INTEGER { + critical(1), + major(2), + minor(3), + info(4) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The severity of the alarm." + ::= { alarmCurrEntry 13 } + + alarmCurrDescr OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The description of the alarm." + ::= { alarmCurrEntry 14 } + +-- Alarm Severity Port Table + + alarmSeverityPortTable OBJECT-TYPE + SYNTAX SEQUENCE OF AlarmSeverityPortEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table includes the configuration of alarm reporting severity threshold for each port." + ::= { alarmconf 4 } + + alarmSeverityPortEntry OBJECT-TYPE + SYNTAX AlarmSeverityPortEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in alarmSeverityPortTable." + INDEX { ifIndex } + ::= { alarmSeverityPortTable 1 } + + AlarmSeverityPortEntry ::= + SEQUENCE { + severityThresh INTEGER + } + + severityThresh OBJECT-TYPE + SYNTAX INTEGER { + critical(1), + major(2), + minor(3), + info(4) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The minimum alarm severity that is reported." + ::= { alarmSeverityPortEntry 1 } + +---------------------------------------- +-- diagnostic +---------------------------------------- + + selt OBJECT IDENTIFIER ::= { diagnostic 3 } + + +-------------------- +-- selt +-------------------- + + seltTarget OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "IfIndex of the port which would be performed single end loopback test." + ::= { selt 1 } + + seltOps OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The manager sets the object to 1 to start the selt + and the agent clears the object to zero when selt is successfully completed." + ::= { selt 2 } + + seltStatus OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Status description of the selt result." + ::= { selt 3 } + + seltCableType OBJECT-TYPE + SYNTAX INTEGER { + awg24(1), + awg26(2) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The cable type that selt result indicates." + ::= { selt 4 } + + seltLoopEstimateLengthFt OBJECT-TYPE + SYNTAX INTEGER + UNITS "feet" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The estimated loop length that selt result indicates." + ::= { selt 5 } + + seltLoopEstimateLengthMeter OBJECT-TYPE + SYNTAX INTEGER + UNITS "meter" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The estimated loop length that selt result indicates." + ::= { selt 6 } + + +---------------------------------------- +-- multicast +---------------------------------------- +-- Obsoleted in calix MRD20 since Revision 1.20 at 2009/06/25 by niceguy +-- Object mcastBandwidth, igmpCount below is kept for e5-110 R1.x below. Not used for R2.x and above. + + mcastBandwidth OBJECT IDENTIFIER ::= { multicast 4 } + igmpCount OBJECT IDENTIFIER ::= { multicast 5 } + mvlan OBJECT IDENTIFIER ::= { multicast 6 } + queryVid OBJECT IDENTIFIER ::= { multicast 7 } + igmpTimer OBJECT IDENTIFIER ::= { multicast 11 } + auditQuery OBJECT IDENTIFIER ::= { multicast 12 } + igmpProfile OBJECT IDENTIFIER ::= { multicast 13 } + + igmpEnable OBJECT-TYPE + SYNTAX INTEGER { + enableProxy(1), + enableSnooping(2), + disable(3) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enable/disable IGMP protocol." + ::= { multicast 1 } + + igmpVersion OBJECT-TYPE + SYNTAX INTEGER { + v2(1), + v3(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Setting IGMP version." + ::= { multicast 9 } + + igmpLeaveMode OBJECT-TYPE + SYNTAX INTEGER { + immediateLeave(1), + lastMemberQuery(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Configure IGMP leave message handling mode." + ::= { multicast 10 } + +-------------------- +-- bandwidth +-------------------- + + mcastDefaultBandwidth OBJECT-TYPE + SYNTAX INTEGER (1..100000) + UNITS "Kbps" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Default bandwidth requirement for a multicast channel." + ::= { mcastBandwidth 1 } + + maxNumOfMcastBw OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The maximum number of row entries that user can create in mcastBwTable." + ::= { mcastBandwidth 2 } + +-- mcastBwTable + + mcastBwTable OBJECT-TYPE + SYNTAX SEQUENCE OF McastBwEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table defines bandwidth budget for a range of multicast IP channels." + ::= { mcastBandwidth 3 } + + mcastBwEntry OBJECT-TYPE + SYNTAX McastBwEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry of mcastBwTable." + INDEX { mcastBwIndex, mcastBwStartIp, mcastBwEndIp } + ::= { mcastBwTable 1 } + + McastBwEntry ::= + SEQUENCE { + mcastBwIndex INTEGER, + mcastBwStartIp IpAddress, + mcastBwEndIp IpAddress, + mcastBwBandwidth INTEGER, + mcastBwRowStatus RowStatus + } + + mcastBwIndex OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The index which specify the entry." + ::= { mcastBwEntry 1 } + + mcastBwStartIp OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The start multicast IP of the bandwidth control range." + ::= { mcastBwEntry 2 } + + mcastBwEndIp OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The end multicast IP of the bandwidth control range." + ::= { mcastBwEntry 3 } + + mcastBwBandwidth OBJECT-TYPE + SYNTAX INTEGER + UNITS "Kbps" + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The bandwidth budget for the multicast IP channels." + ::= { mcastBwEntry 4 } + + mcastBwRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The row status of the entry." + ::= { mcastBwEntry 5 } + +-- mcastBwPortTable + + mcastBwPortTable OBJECT-TYPE + SYNTAX SEQUENCE OF McastBwPortEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table specify the multicast bandwidth control of the port." + ::= { mcastBandwidth 4 } + + mcastBwPortEntry OBJECT-TYPE + SYNTAX McastBwPortEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry of mcastBwPortTable." + INDEX { ifIndex } + ::= { mcastBwPortTable 1 } + + McastBwPortEntry ::= + SEQUENCE { + mcastBwPortEnable INTEGER, + mcastBwPortBandwidth INTEGER + } + + mcastBwPortEnable OBJECT-TYPE + SYNTAX INTEGER { + enable(1), + disable(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enable/disable multicast bandwidth control for a port." + ::= { mcastBwPortEntry 1 } + + mcastBwPortBandwidth OBJECT-TYPE + SYNTAX INTEGER + UNITS "Kbps" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Set bandwidth threshold for a port." + ::= { mcastBwPortEntry 2 } + +-------------------- +-- igmpCount +-------------------- + + igmpCountPortTable OBJECT-TYPE + SYNTAX SEQUENCE OF IgmpCountPortEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table specify the IGMP count limiting of the port." + ::= { igmpCount 1 } + + igmpCountPortEntry OBJECT-TYPE + SYNTAX IgmpCountPortEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry of igmpCountPortTable." + INDEX { ifIndex } + ::= { igmpCountPortTable 1 } + + IgmpCountPortEntry ::= + SEQUENCE { + igmpCountPortEnable INTEGER, + igmpCountPortLimit INTEGER + } + + igmpCountPortEnable OBJECT-TYPE + SYNTAX INTEGER { + enable(1), + disable(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enable/disable IGMP count limiting for a port." + ::= { igmpCountPortEntry 1 } + + igmpCountPortLimit OBJECT-TYPE + SYNTAX INTEGER (0..16) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The maximum allowed IGMP report count for a port." + ::= { igmpCountPortEntry 2 } + +-------------------- +-- mvlan +-------------------- + + maxNumOfMvlan OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The maximum number of row entries that user can create in mvlanTable." + ::= { mvlan 1 } + +-- mvlanTable + + mvlanTable OBJECT-TYPE + SYNTAX SEQUENCE OF MvlanEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table containing static configuration information for + each multicast VLAN configured into the device." + ::= { mvlan 2 } + + mvlanEntry OBJECT-TYPE + SYNTAX MvlanEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry of mvlanTable." + INDEX { mvlanIndex } + ::= { mvlanTable 1 } + + MvlanEntry ::= + SEQUENCE { + mvlanIndex VlanIndex, + mvlanName DisplayString, + mvlanEgressPorts PortList, + mvlanUntaggedPorts PortList, + mvlanRowStatus RowStatus + } + + mvlanIndex OBJECT-TYPE + SYNTAX VlanIndex + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The VLAN-ID refering to this VLAN." + ::= { mvlanEntry 1 } + + mvlanName OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..31)) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "An administratively assigned string, which may be used to identify the VLAN." + ::= { mvlanEntry 2 } + + mvlanEgressPorts OBJECT-TYPE + SYNTAX PortList + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The set of ports which are permanently assigned to the + egress list for this multicast VLAN." + ::= { mvlanEntry 3 } + + mvlanUntaggedPorts OBJECT-TYPE + SYNTAX PortList + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The set of ports which should transmit egress packets + for this multicast VLAN as untagged." + ::= { mvlanEntry 4 } + + mvlanRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object indicates the status of this entry." + ::= { mvlanEntry 5 } + +-- mvlanTranslateTable + + mvlanTranslateTable OBJECT-TYPE + SYNTAX SEQUENCE OF MvlanTranslateEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table that contains multicast to VLAN translation." + ::= { mvlan 3 } + + mvlanTranslateEntry OBJECT-TYPE + SYNTAX MvlanTranslateEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry of mvlanTranslateTable." + INDEX { dot1qVlanIndex, mvlanTranslateIndex } + ::= { mvlanTranslateTable 1 } + + MvlanTranslateEntry ::= + SEQUENCE { + mvlanTranslateIndex INTEGER, + mvlanTranslateStartIp IpAddress, + mvlanTranslateEndIp IpAddress + } + + mvlanTranslateIndex OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The index which specif the entry." + ::= { mvlanTranslateEntry 1 } + + mvlanTranslateStartIp OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The start IP of the multicast VLAN translation." + ::= { mvlanTranslateEntry 2 } + + mvlanTranslateEndIp OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The end IP of the multicast VLAN translation." + ::= { mvlanTranslateEntry 3 } + +-------------------- +-- queryVid +-------------------- + + maxNumOfQryVid OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The maximum number of row entries that user can create in qryVidConfTable." + ::= { queryVid 1 } + +-- qryVidConfTable + + qryVidConfTable OBJECT-TYPE + SYNTAX SEQUENCE OF QryVidConfEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table defines statically set VLANs used for response IGMP report." + ::= { queryVid 2 } + + qryVidConfEntry OBJECT-TYPE + SYNTAX QryVidConfEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in qryVidConfTable." + INDEX { qryVid } + ::= { qryVidConfTable 1 } + + QryVidConfEntry ::= + SEQUENCE { + qryVid INTEGER, + qryVidRowStatus RowStatus + } + + qryVid OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "VLAN ID." + ::= { qryVidConfEntry 1 } + + qryVidRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object indicates the status of this entry." + ::= { qryVidConfEntry 2 } + +-- qryVidStatusTable + + qryVidStatusTable OBJECT-TYPE + SYNTAX SEQUENCE OF QryVidStatusEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table shows statically set or dynamically learned VLANs used for response IGMP report." + ::= { queryVid 3 } + + qryVidStatusEntry OBJECT-TYPE + SYNTAX QryVidStatusEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in qryVidStatusTable." + INDEX { qryVid } + ::= { qryVidStatusTable 1 } + + QryVidStatusEntry ::= + SEQUENCE { + qryVidType INTEGER + } + + qryVidType OBJECT-TYPE + SYNTAX INTEGER { + static(1), + dynamic(2) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "VLAN type." + ::= { qryVidStatusEntry 1 } + +-------------------- +-- igmpTimer +-------------------- + + igmpQryInterval OBJECT-TYPE + SYNTAX INTEGER (10..1000) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Set IGMP query interval, 10~1000 in seconds." + ::= { igmpTimer 1 } + + igmpRobust OBJECT-TYPE + SYNTAX INTEGER (1..5) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Set IGMP query Robustness, 1~5." + ::= { igmpTimer 2 } + + igmpQryRespInterval OBJECT-TYPE + SYNTAX INTEGER (1..100) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Set IGMP query response interval, 1~100 in 100 milliseconds." + ::= { igmpTimer 3 } + + igmpLastMemQryInterval OBJECT-TYPE + SYNTAX INTEGER (1..5) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Set IGMP Last Member Query interval, 1~5 in 100 milliseconds." + ::= { igmpTimer 4 } + + igmpLastMemQryRobust OBJECT-TYPE + SYNTAX INTEGER (1..5) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Set Last Member Query Robustness, 1~5." + ::= { igmpTimer 5 } + +-------------------- +-- auditQuery +-------------------- + + auditQryEnable OBJECT-TYPE + SYNTAX INTEGER { + enable(1), + disable(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enable/disable IGMP audit query." + ::= { auditQuery 1 } + + auditQryInterval OBJECT-TYPE + SYNTAX INTEGER (1..4) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Set IGMP Audit Query Interval, 1~4 in 100 milliseconds." + ::= { auditQuery 2 } + + auditQryRobust OBJECT-TYPE + SYNTAX INTEGER (1..5) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Set IGMP Audit Query Robustness, 1~5." + ::= { auditQuery 3 } + +-------------------- +-- igmpProfile +-------------------- + + maxNumberOfIgmpProfiles OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The max number of IGMP profiles in the system." + ::= { igmpProfile 1 } + + igmpProfileTable OBJECT-TYPE + SYNTAX SEQUENCE OF IgmpProfileEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table that contains IGMP Profiles." + ::= { igmpProfile 2 } + + igmpProfileEntry OBJECT-TYPE + SYNTAX IgmpProfileEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The entry of IGMP Profile table." + INDEX {IMPLIED igmpProfileName } + ::= { igmpProfileTable 1 } + + IgmpProfileEntry ::= + SEQUENCE { + igmpProfileName DisplayString, + igmpProfileEnable INTEGER, + igmpProfileMaxGroup INTEGER, + igmpProfileRowStatus RowStatus + } + + igmpProfileName OBJECT-TYPE + SYNTAX DisplayString (SIZE (1..31)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The IGMP Profile name." + ::= { igmpProfileEntry 1 } + + igmpProfileEnable OBJECT-TYPE + SYNTAX INTEGER { + enable(1), + disable(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enable/disable IGMP Profile." + ::= { igmpProfileEntry 2 } + + igmpProfileMaxGroup OBJECT-TYPE + SYNTAX INTEGER (1..16) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Set maximum allowed multicast group, 1~16." + ::= { igmpProfileEntry 3 } + + igmpProfileRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The row status of the IGMP Profile entry." + ::= { igmpProfileEntry 4 } + + igmpFilterTable OBJECT-TYPE + SYNTAX SEQUENCE OF IgmpFilterEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table that contains IGMP Filters." + ::= { igmpProfile 3 } + + igmpFilterEntry OBJECT-TYPE + SYNTAX IgmpFilterEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The entry of IGMP Filter table." + INDEX { igmpProfileName, igmpFilterIndex } + ::= { igmpFilterTable 1 } + + IgmpFilterEntry ::= + SEQUENCE { + igmpFilterIndex INTEGER, + igmpFilterStartIp IpAddress, + igmpFilterEndIp IpAddress + } + + igmpFilterIndex OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The index which specifies the filter rule." + ::= { igmpFilterEntry 1 } + + igmpFilterStartIp OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The start IP of the filter rule." + ::= { igmpFilterEntry 2 } + + igmpFilterEndIp OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The end IP of the filter rule." + ::= { igmpFilterEntry 3 } + + igmpProfilePortTable OBJECT-TYPE + SYNTAX SEQUENCE OF IgmpProfilePortEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table specifies the IGMP Profile of the port." + ::= { igmpProfile 4 } + + igmpProfilePortEntry OBJECT-TYPE + SYNTAX IgmpProfilePortEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in igmpProfilePortTable." + INDEX { ifIndex } + ::= { igmpProfilePortTable 1 } + + IgmpProfilePortEntry ::= + SEQUENCE { + igmpProfilePortProfile OCTET STRING + } + + igmpProfilePortProfile OBJECT-TYPE + SYNTAX OCTET STRING (SIZE (1..31)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The IGMP Profile of the port." + ::= { igmpProfilePortEntry 1 } + + + +---------------------------------------- +-- port +---------------------------------------- +-- Since we define it latter, mark the definition here +-- subrPortTable OBJECT IDENTIFIER ::= { port 1 } + adslPort OBJECT IDENTIFIER ::= { port 2 } + pvc OBJECT IDENTIFIER ::= { port 4 } + ppvc OBJECT IDENTIFIER ::= { port 5 } + rpvc OBJECT IDENTIFIER ::= { port 8 } +-- Since we define it latter, mark the definition here +-- dsBcastDisableTable OBJECT IDENTIFIER ::= { port 9 } + paepvc OBJECT IDENTIFIER ::= { port 10 } + tlspvc OBJECT IDENTIFIER ::= { port 11 } + ipbpvc OBJECT IDENTIFIER ::= { port 12 } -- obsoleted since R3.0 at 2009/11/26 + dtpvc OBJECT IDENTIFIER ::= { port 14 } + snrMgn OBJECT IDENTIFIER ::= { port 15 } + dslRate OBJECT IDENTIFIER ::= { port 16 } +-- G.bond start from 51 + gbond OBJECT IDENTIFIER ::= { port 51 } +-- Subscriber Port Table + + subrPortTable OBJECT-TYPE + SYNTAX SEQUENCE OF SubrPortEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table includes subscriber attributes for the port." + ::= { port 1 } + + subrPortEntry OBJECT-TYPE + SYNTAX SubrPortEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in subrPortTable." + INDEX { ifIndex } + ::= { subrPortTable 1 } + + SubrPortEntry ::= + SEQUENCE { + subrPortName DisplayString, + subrPortTel DisplayString + } + + subrPortName OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..31)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Name of the subscriber." + ::= { subrPortEntry 1 } + + subrPortTel OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..15)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Telephone number of the subscriber." + ::= { subrPortEntry 2 } + +-------------------- +-- adslPort +-------------------- + +-- ADSL Line Table + + adslLineConfTable OBJECT-TYPE + SYNTAX SEQUENCE OF AdslLineConfEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table includes common attributes describing the ADSL line." + ::= { adslPort 1 } + + adslLineConfEntry OBJECT-TYPE + SYNTAX AdslLineConfEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in adslLineConfTable." + INDEX { ifIndex } + ::= { adslLineConfTable 1 } + + AdslLineConfEntry ::= + SEQUENCE { + adslLineConfAdslMode INTEGER, + adslLineConfAnnexL INTEGER, + adslLineConfAnnexM INTEGER, + adslLineConfAnnexI INTEGER, + adslLineConfOptionMask INTEGER, + adslLineConfPowerMgmt INTEGER, + adslLineConfPowerMode INTEGER, + adslLineConfAturMaxTxPower INTEGER, + adslLineConfAtucMaxTxPower INTEGER, + adslLineConfMaxRxPower INTEGER, + adslLineConfAturCarrierMask OCTET STRING, + adslLineConfAtucCarrierMask0 OCTET STRING, + adslLineConfAtucCarrierMask1 OCTET STRING, + adslLineConfAturInp INTEGER, + adslLineConfAtucInp INTEGER, + adslLineConfL0Time INTEGER, + adslLineConfL2Time INTEGER, + adslLineConfL2ATPR INTEGER, + adslLineConfL2ATPRT INTEGER, + adslLineConfMaxL2Rate INTEGER, + adslLineConfMinL2Rate INTEGER, + adslLineConfL0toL2Rate INTEGER, + adslLineConfNitro INTEGER, + adslLineConfUSPhyr INTEGER, + adslLineConfDSPhyr INTEGER + } + + adslLineConfAdslMode OBJECT-TYPE + SYNTAX INTEGER { + gDotLite(1), + gDotDmt(2), + t1Dot413(3), + auto(4), + etsi(5), + adsl2(6), + adsl2Plus(7) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "G.lite and T1.413 are only applicable to annex A board. + ETSI is only applicable to annex B board." + ::= { adslLineConfEntry 1 } + + adslLineConfAnnexL OBJECT-TYPE + SYNTAX INTEGER { + enableNarrowMode(1), + enableWideMode(2), + disable(3) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enable/disable annex L for the port(Only in AnnexA)." + ::= { adslLineConfEntry 2 } + + adslLineConfAnnexM OBJECT-TYPE + SYNTAX INTEGER { + enable(1), + disable(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enable/disable annex M for the port(For BCM AnnexA solution)." + ::= { adslLineConfEntry 3 } + + adslLineConfAnnexI OBJECT-TYPE + SYNTAX INTEGER { + enable(1), + disable(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enable/disable annex I for the port(For BCM AnnexA solution)." + ::= { adslLineConfEntry 4 } + + adslLineConfOptionMask OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The semantic for each bit is: + BIT 1 : Disable Trellis + BIT 2 : Disable Reed-Solomon + BIT 3 : Disable upstream bitswap + BIT 4 : Disable downstream bitswap + BIT 5 : Disable 1-bit constellation + BIT 6 : Disable transmit windowing + BIT 7 : Disable s=0.5 support (ADSL1 only) + BIT 8 : Disable G.lite rate limit (ADSL1 only) + BIT 9 : Enable Nitro + BIT 10: Enable US PHYR + BIT 11: ENABLE DS PHYR" + ::= { adslLineConfEntry 5 } + + adslLineConfPowerMgmt OBJECT-TYPE + SYNTAX INTEGER { + enableL2(1), + enableL2(2), + disable(3) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enable/disable power management for the port." + ::= { adslLineConfEntry 6 } + + adslLineConfPowerMode OBJECT-TYPE + SYNTAX INTEGER { + fix(1), + priorityToPower(2), + priorityToRate(3) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The power mode of the ADSL line." + ::= { adslLineConfEntry 7 } + + adslLineConfAturMaxTxPower OBJECT-TYPE + SYNTAX INTEGER (-130..200) + UNITS "tenth dBm" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The maximum allowed transmit power of ATU-R." + ::= { adslLineConfEntry 8 } + + adslLineConfAtucMaxTxPower OBJECT-TYPE + SYNTAX INTEGER (-50..200) + UNITS "tenth dBm" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The maximum allowed transmit power of ATU-C." + ::= { adslLineConfEntry 9 } + + adslLineConfMaxRxPower OBJECT-TYPE + SYNTAX INTEGER (-255..255) + UNITS "tenth dBm" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The maximum aggregate received power." + ::= { adslLineConfEntry 10 } + + adslLineConfAturCarrierMask OBJECT-TYPE + SYNTAX OCTET STRING + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The upstream carrier mask. For CTLM AnnexA solution, bin is from 0 to 31; + CTLM AnnexB solution, bin is from 0 to 63; BCM solution, bin is from 0 to 63. + Bit set to 1 indicates the bin is masked off." + ::= { adslLineConfEntry 11 } + + adslLineConfAtucCarrierMask0 OBJECT-TYPE + SYNTAX OCTET STRING + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The downstream carrier mask. For CTLM AnnexA solution, bin is from 32 to 255; + CTLM AnnexB solution, bin is from 64 to 255; BCM solution, bin is from 32 to 255. + Bit set to 1 indicates the bin is masked off." + ::= { adslLineConfEntry 12 } + + adslLineConfAtucCarrierMask1 OBJECT-TYPE + SYNTAX OCTET STRING + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The downstream carrier mask from bin 256 to 511. Bit set to 1 indicates + the bin is masked off." + ::= { adslLineConfEntry 13 } + + adslLineConfAturInp OBJECT-TYPE + SYNTAX INTEGER { + zero(1), + zeroPointFive(2), + one(3), + two(4), + four(5), + eight(6), + sixteen(7) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The upstream Impulse Noise Protection minimum setting in unit of DMT symbol. + For CTLM solution, user can set value from 1 ~ 4, + but for BCM solution, user can set value from 1 ~ 7." + ::= { adslLineConfEntry 14 } + + adslLineConfAtucInp OBJECT-TYPE + SYNTAX INTEGER { + zero(1), + zeroPointFive(2), + one(3), + two(4), + four(5), + eight(6), + sixteen(7) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The downstream Impulse Noise Protection minimum setting in unit of DMT symbol. + For CTLM solution, user can set value from 1 ~ 4, + but for BCM solution, user can set value from 1 ~ 7." + ::= { adslLineConfEntry 15 } + + + adslLineConfL0Time OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Set the minimum time in seconds that the ADSL line + must stay in L0 power mode before changing to the L2 power mode. + For CTLM solution, the range is 120 ~ 65535; + for BCM solution, the range is 10 ~ 65535." + ::= { adslLineConfEntry 16 } + + adslLineConfL2Time OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Set minimum time in seconds that the ADSL line must stay in the + L2 power mode before reducing the power again in the L2 power mode. + For CTLM solution, the range is 60 ~ 65535; + for BCM solution, the range is 10 ~ 65535." + ::= { adslLineConfEntry 17 } + + adslLineConfL2ATPR OBJECT-TYPE + SYNTAX INTEGER + UNITS "dB" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Set the maximum Aggregate Transmit Power Reduction (ATPR) + in decibels (dB) that is permitted in a L2 power reduction. + The system can gradually decrease the ADSL line transmission power + while it is in the L2 power mode. This is the largest individual + power reduction allowed in the L2 power mode. + For CTLM solution, the range is 1 ~ 5(dB); + for BCM solution, the range is 0 ~ 15(dB)." + ::= { adslLineConfEntry 18 } + + adslLineConfL2ATPRT OBJECT-TYPE + SYNTAX INTEGER + UNITS "dB" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "the maximum Aggregate Transmit Power Reduction Total (ATPRT) + in decibels (dB) that is permitted in the L2 power mode. + This is the total transmit power decrease that is allowed + to occur in the L2 power mode. + For CTLM solution, the range is 1 ~ 40(dB); + for BCM solution, the range is 0 ~ 15(dB)." + ::= { adslLineConfEntry 19 } + + + adslLineConfMaxL2Rate OBJECT-TYPE + SYNTAX INTEGER + UNITS "kbps" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "configured maximum L2 rate. + (32~4096 Kbps, 4 Kbps resolution. For CTLM solution, 0 for system assign; for BCM solution, default:4096.)" + ::= { adslLineConfEntry 20 } + + adslLineConfMinL2Rate OBJECT-TYPE + SYNTAX INTEGER + UNITS "kbps" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "configured minimum L2 rate. + (32~4096 Kbps, 4 Kbps resolution, For CTLM solution, 0 for system assign; for BCM solution, default:32.)" + ::= { adslLineConfEntry 21 } + + adslLineConfL0toL2Rate OBJECT-TYPE + SYNTAX INTEGER + UNITS "kbps" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "configured transition L0 to L2 rate. + (<=min_l2rate/2 and >= 16 Kbps, For CTLM solution, 0 for system assign; for BCM solution, default:16.)" + ::= { adslLineConfEntry 22 } + + adslLineConfNitro OBJECT-TYPE + SYNTAX INTEGER { + enable(1), + disable(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enable/disable nitro mode for the port(For BCM solution)." + ::= { adslLineConfEntry 23 } + + adslLineConfUSPhyr OBJECT-TYPE + SYNTAX INTEGER { + enable(1), + disable(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enable/disable Upstream PHYR for the port(For BCM solution)." + ::= { adslLineConfEntry 24 } + + adslLineConfDSPhyr OBJECT-TYPE + SYNTAX INTEGER { + enable(1), + disable(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enable/disable Downstream PHYR for the port(For BCM solution)." + ::= { adslLineConfEntry 25 } + +-- ADSL Port Batch Set + + adslPortBatchSet OBJECT IDENTIFIER ::= { adslPort 3 } + + adslPortTarget OBJECT-TYPE + SYNTAX OCTET STRING + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The managed object is used for identify the target on which + the port configuration should be performed. The target is encoded as: + Byte 1: 0, Reserved(chaises) + Byte 2~3: 0,0 Reserved(slot) + Byte 4: 0, reserved + Byte 5~11:each octet specifies a set of eight ports, with the first + octet specifying ports 1 through 8, etc." + ::= { adslPortBatchSet 1 } + + adslPortOps OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The managed object is for ADSL line configuration. When the EMS + wants to issue the desired operation, the EMS shall send SNMP-SET message to set + the corresponding bit value to be 1. The various bit positions are: + BIT 1: enable port + BIT 2: disable port + BIT 3: set ADSL mode + BIT 4: set line profile + BIT 5: set alarm profile + BIT 6: enable Annex L to be narrow mode(Only in AnnexA) + BIT 7: enable Annex L to be wide mode(Only in AnnexA) + BIT 8: disable Annex L(Only in AnnexA) + BIT 9: enable Annex M (For BCM AnnexA solution) + BIT 10: disable Annex M (For BCM AnnexA solution) + BIT 11: enable Annex I (For BCM AnnexA solution) + BIT 12: disable Annex I (For BCM AnnexA solution) + BIT 13: set option mask + BIT 14: enable power management mode to be L2 + BIT 15: enable power management mode to be L2 + BIT 16: disable power management mode + BIT 17: set power mode to be fixed + BIT 18: set power mode to be priority to power + BIT 19: set power mode to be priority to rate + BIT 20: set ATU-R max Tx power + BIT 21: set ATU-C max Tx power + BIT 22: set max Rx power + BIT 23: set ATU-R carrier mask + BIT 24: set ATU-C carrier mask + BIT 25: set ATU-R INP minimum setting + BIT 26: set ATU-C INP minimum setting" + ::= { adslPortBatchSet 2 } + + adslPortOps2 OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The managed object is for ADSL line configuration. When the EMS + wants to issue the desired operation, the EMS shall send SNMP-SET message to set + the corresponding bit value to be 1. The various bit positions are: + BIT 1: set L0 Time + BIT 2: set L2 Time + BIT 3: set L2 ATPR + BIT 4: set L2 ATPRT + BIT 5: set maximum L2 rate + BIT 6: set minimum L2 rate + BIT 7: set transition L0 to L2 rate" + ::= { adslPortBatchSet 3 } + + + adslModeForBatchSet OBJECT-TYPE + SYNTAX INTEGER { + gDotLite(1), + gDotDmt(2), + t1Dot413(3), + auto(4), + etsi(5), + adsl2(6), + adsl2Plus(7) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "G.lite and T1.413 are only applicable to annex A board. + ETSI is only applicable to annex B board." + ::= { adslPortBatchSet 4 } + + adslLineProfileForBatchSet OBJECT-TYPE + SYNTAX DisplayString (SIZE (1..31)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The ADSL line profile." + ::= { adslPortBatchSet 5 } + + adslAlarmProfileForBatchSet OBJECT-TYPE + SYNTAX DisplayString (SIZE (1..31)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The ADSL alarm profile." + ::= { adslPortBatchSet 6 } + + adslOptionMaskForBatchSet OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The semantic for each bit is identical to the object adslLineConfOptionMask." + ::= { adslPortBatchSet 7 } + + adslAturMaxTxPowerForBatchSet OBJECT-TYPE + SYNTAX INTEGER (-130..200) + UNITS "tenth dBm" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The maximum allowed transmit power of ATU-R." + ::= { adslPortBatchSet 8 } + + adslAtucMaxTxPowerForBatchSet OBJECT-TYPE + SYNTAX INTEGER (-50..200) + UNITS "tenth dBm" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The maximum allowed transmit power of ATU-C." + ::= { adslPortBatchSet 9 } + + adslMaxRxPowerForBatchSet OBJECT-TYPE + SYNTAX INTEGER (-255..255) + UNITS "tenth dBm" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The maximum aggregate received power." + ::= { adslPortBatchSet 10 } + + adslAturCarrierMaskForBatchSet OBJECT-TYPE + SYNTAX OCTET STRING + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The upstream carrier mask.For CTLM AnnexA solution, bin is from 0 to 31; + CTLM AnnexB solution, bin is from 0 to 63; BCM solution, bin is from 0 to 63. + Bit set to 1 indicates the bin is masked off." + ::= { adslPortBatchSet 11 } + + adslAtucCarrierMask0ForBatchSet OBJECT-TYPE + SYNTAX OCTET STRING + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The downstream carrier mask from bin 32 to 255. Bit set to 1 indicates + the bin is masked off." + ::= { adslPortBatchSet 12 } + + adslAtucCarrierMask1ForBatchSet OBJECT-TYPE + SYNTAX OCTET STRING + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The downstream carrier mask from bin 256 to 511. Bit set to 1 indicates + the bin is masked off." + ::= { adslPortBatchSet 13 } + + adslAturInpForBatchSet OBJECT-TYPE + SYNTAX INTEGER { + zero(1), + zeroPointFive(2), + one(3), + two(4), + four(5), + eight(6), + sixteen(7) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The upstream Impulse Noise Protection minimum setting in unit of DMT symbol. + For CTLM solution, user can set value from 1 ~ 4, but for BCM solution, user can set value from 1 ~ 7." + ::= { adslPortBatchSet 14 } + + adslAtucInpForBatchSet OBJECT-TYPE + SYNTAX INTEGER { + zero(1), + zeroPointFive(2), + one(3), + two(4), + four(5), + eight(6), + sixteen(7) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The downstream Impulse Noise Protection minimum setting in unit of DMT symbol. + For CTLM solution, user can set value from 1 ~ 4, but for BCM solution, user can set value from 1 ~ 7." + ::= { adslPortBatchSet 15 } + + + adslL0TimeForBatchSet OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Set the minimum time in seconds that the ADSL line + must stay in L0 power mode before changing to the L2 power mode. + For CTLM solution, the range is 120 ~ 65535; for BCM solution, the range is 10 ~ 65535." + ::= { adslPortBatchSet 16 } + + adslL2TimeForBatchSet OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Set minimum time in seconds that the ADSL line + must stay in the L2 power mode before reducing the power + again in the L2 power mode. + For CTLM solution, the range is 60 ~ 65535; for BCM solution, the range is 10 ~ 65535." + ::= { adslPortBatchSet 17 } + + adslL2ATPRForBatchSet OBJECT-TYPE + SYNTAX INTEGER + UNITS "dB" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Set the maximum Aggregate Transmit Power Reduction (ATPR) + in decibels (dB) that is permitted in a L2 power reduction. + The system can gradually decrease the ADSL line transmission power + while it is in the L2 power mode. This is the largest individual + power reduction allowed in the L2 power mode. + For CTLM solution, the range is 1 ~ 5(dB); for BCM solution, the range is 0 ~ 15(dB)." + ::= { adslPortBatchSet 18 } + + adslL2ATPRTForBatchSet OBJECT-TYPE + SYNTAX INTEGER + UNITS "dB" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "the maximum Aggregate Transmit Power Reduction Total (ATPRT) + in decibels (dB) that is permitted in the L2 power mode. + This is the total transmit power decrease that is allowed + to occur in the L2 power mode. + For CTLM solution, the range is 1 ~ 40(dB); for BCM solution, the range is 0 ~ 15(dB)." + ::= { adslPortBatchSet 19 } + + adslMaxL2RateForBatchSet OBJECT-TYPE + SYNTAX INTEGER + UNITS "kbps" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "configured maximum L2 rate. + (32~4096 Kbps, 4 Kbps resolution. For CTLM solution, 0 for system assign; for BCM solution, default:4096.)" + ::= { adslPortBatchSet 20 } + + adslMinL2RateForBatchSet OBJECT-TYPE + SYNTAX INTEGER + UNITS "kbps" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "configured minimum L2 rate. + (32~4096 Kbps, 4 Kbps resolution, For CTLM solution, 0 for system assign; for BCM solution, default:32.)" + ::= { adslPortBatchSet 21 } + + adslL0toL2RateForBatchSet OBJECT-TYPE + SYNTAX INTEGER + UNITS "kbps" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "configured transition L0 to L2 rate. + (<=min_l2rate/2 and >= 16 Kbps, For CTLM solution, 0 for system assign; for BCM solution, default:16.)" + ::= { adslPortBatchSet 22 } + +-- Line Status + + adslLineStatusTable OBJECT-TYPE + SYNTAX SEQUENCE OF AdslLineStatusEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table includes the ADSL line status." + ::= { adslPort 4 } + + adslLineStatusEntry OBJECT-TYPE + SYNTAX AdslLineStatusEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in adslLineStatusTable." + INDEX { ifIndex } + ::= { adslLineStatusTable 1 } + + AdslLineStatusEntry ::= + SEQUENCE { + adslLineStatusMode INTEGER, + adslLineUpTime INTEGER + } + + adslLineStatusMode OBJECT-TYPE + SYNTAX INTEGER { + gDotLite(1), + gDotDmt(2), + t1Dot413(3), + etsi(4), + adsl2(5), + adsl2Plus(6), + none(7) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The link up mode of the ADSL line." + ::= { adslLineStatusEntry 1 } + + adslLineUpTime OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The link up time of the ADSL line, in unit of seconds" + ::= { adslLineStatusEntry 2 } + +-- Power Mgmt Parameter Table + + powerMgmtParamTable OBJECT-TYPE + SYNTAX SEQUENCE OF PowerMgmtParamEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table defines L0 to L2 power transition parameters." + ::= { adslPort 5 } + + powerMgmtParamEntry OBJECT-TYPE + SYNTAX PowerMgmtParamEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in powerMgmtParamTable." + INDEX { ifIndex } + ::= { powerMgmtParamTable 1 } + + PowerMgmtParamEntry ::= + SEQUENCE { + powerMgmtL0Time INTEGER, + powerMgmtL2Time INTEGER, + powerMgmtL2Atpr INTEGER, + powerMgmtL2Atprt INTEGER, + powerMgmtL2MinRate INTEGER, + powerMgmtL2MaxRate INTEGER, + powerMgmtL2ThreshRate INTEGER + } + + powerMgmtL0Time OBJECT-TYPE + SYNTAX INTEGER + UNITS "second" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The object specifies the minimum time in L0 mode before L2 mode may be entered." + ::= { powerMgmtParamEntry 1 } + + powerMgmtL2Time OBJECT-TYPE + SYNTAX INTEGER + UNITS "second" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The object specifies the minimum time in L2 mode before trimming and in between power trims." + ::= { powerMgmtParamEntry 2 } + + powerMgmtL2Atpr OBJECT-TYPE + SYNTAX INTEGER + UNITS "dB" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The maximum Aggregate Transmit Power Reduction." + ::= { powerMgmtParamEntry 3 } + + powerMgmtL2Atprt OBJECT-TYPE + SYNTAX INTEGER + UNITS "dB" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The maximum Aggregate Transmit Power Reduction Total." + ::= { powerMgmtParamEntry 4 } + + powerMgmtL2MinRate OBJECT-TYPE + SYNTAX INTEGER + UNITS "Kbps" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The object specifies the minimum L2 rate." + ::= { powerMgmtParamEntry 5 } + + powerMgmtL2MaxRate OBJECT-TYPE + SYNTAX INTEGER + UNITS "Kbps" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The object specifies the maximum L2 rate." + ::= { powerMgmtParamEntry 6 } + + powerMgmtL2ThreshRate OBJECT-TYPE + SYNTAX INTEGER + UNITS "Kbps" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The object specifies the rate threshold that triggers the line entering L0 or L2 mode." + ::= { powerMgmtParamEntry 7 } + +-- Power Mgmt PSD Table +-- Not support in 7324 RU R4.0.2 + powerMgmtPSDTable OBJECT-TYPE + SYNTAX SEQUENCE OF PowerMgmtPSDEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table provides the PSD setting for both ATU-C and ATU-R." + ::= { adslPort 6 } + + powerMgmtPSDEntry OBJECT-TYPE + SYNTAX PowerMgmtPSDEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in powerMgmtPSDTable." + INDEX { ifIndex } + ::= { powerMgmtPSDTable 1 } + + PowerMgmtPSDEntry ::= + SEQUENCE { + powerMgmtAtucMaxPSD INTEGER, + powerMgmtAturMaxPSD INTEGER + } + + powerMgmtAtucMaxPSD OBJECT-TYPE + SYNTAX INTEGER + UNITS "0.1dBm/Hz" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The object specifies the maximum ATU-C PSD." + ::= { powerMgmtPSDEntry 1 } + + powerMgmtAturMaxPSD OBJECT-TYPE + SYNTAX INTEGER + UNITS "0.1dBm/Hz" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The object specifies the maximum ATU-R PSD." + ::= { powerMgmtPSDEntry 2 } + +-------------------- +-- pvc +-------------------- + + maxNumOfPvcs OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The maximum number of PVCs which could be created on a port." + ::= { pvc 1 } + +-- PVC Table + + pvcTable OBJECT-TYPE + SYNTAX SEQUENCE OF PvcEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table includes PVC configuration." + ::= { pvc 2 } + + pvcEntry OBJECT-TYPE + SYNTAX PvcEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in pvcTable." + INDEX { ifIndex, pvcVpi, pvcVci, pvcPvid } + ::= { pvcTable 1 } + + PvcEntry ::= + SEQUENCE { + -- Common -- + pvcVpi INTEGER, + pvcVci INTEGER, + pvcPvid VlanIndex, + pvcPriority INTEGER, + pvcProfileDS DisplayString, + pvcProfileUS DisplayString, + + -- Only for paepvc -- + --pvcPaePvid VlanIndex, + --pvcPaePriority INTEGER, + pvcAcName DisplayString, + pvcServiceName DisplayString, + pvcHelloTime INTEGER, + + -- Only for pvc -- + --pvcSuperChannel INTEGER, + + -- Other -- + pvcRowStatus RowStatus + } + + -- Common -- + pvcVpi OBJECT-TYPE + SYNTAX INTEGER (0..255) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "VPI of the pvc." + ::= { pvcEntry 1 } + + pvcVci OBJECT-TYPE + SYNTAX INTEGER (1..65535) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "VCI of the pvc." + ::= { pvcEntry 2 } + + pvcPvid OBJECT-TYPE + SYNTAX VlanIndex + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Default VID of the pvc." + ::= { pvcEntry 3 } + + + pvcPriority OBJECT-TYPE + SYNTAX INTEGER (0..7) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "802.1p default priority of the pvc." + ::= { pvcEntry 5 } + + pvcProfileDS OBJECT-TYPE + SYNTAX DisplayString (SIZE (1..31)) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The value of this object identifies the row in the atmProfileTable, + which applies for this pvc in DS side." + ::= { pvcEntry 6 } + + -- Other -- + pvcRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object is used to create a new row or delete an existing row in this table." + ::= { pvcEntry 7 } + + pvcProfileUS OBJECT-TYPE + SYNTAX DisplayString (SIZE (1..31)) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The value of this object identifies the row in the atmProfileTable, + which applies for this pvc in US side." + ::= { pvcEntry 8 } + + -- Only for PAEPVC -- + --pvcPaePvid OBJECT-TYPE + --SYNTAX VlanIndex + --MAX-ACCESS read-only + --STATUS current + --DESCRIPTION + --"Default P-VID for paepvc." + --::= { pvcEntry 9 } + + --pvcPaePriority OBJECT-TYPE + --SYNTAX INTEGER (0..7) + --MAX-ACCESS read-only + --STATUS current + --DESCRIPTION + --"802.1p default Pae-priority for paepvc." + --::= { pvcEntry 10 } + + pvcAcName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Access concentrator name for paepvc." + ::= { pvcEntry 11 } + + pvcServiceName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Service name for paepvc." + ::= { pvcEntry 12 } + + pvcHelloTime OBJECT-TYPE + SYNTAX INTEGER + UNITS "second" + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The system will close the PVC if there are not any LCP echo messages passed through during the LCP hello time." + ::= { pvcEntry 13 } + + -- Only for PVC -- + --pvcSuperChannel OBJECT-TYPE + --SYNTAX INTEGER { + --enable(1), + --disable(2) + --} + --MAX-ACCESS read-create + --STATUS current + --DESCRIPTION + --"Specified the configured PVC is a super channel." + --::= { pvcEntry 14 } + +-- PVC state -- + pvcStateTable OBJECT-TYPE + SYNTAX SEQUENCE OF PvcStateEntry + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This table show current PVC status." + ::= { pvc 3 } + + pvcStateEntry OBJECT-TYPE + SYNTAX PvcStateEntry + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "An entry in pvcStateTable." + INDEX { ifIndex, pvcStateVpi, pvcStateVci, pvcStatePvid } + ::= { pvcStateTable 1 } + + PvcStateEntry ::= + SEQUENCE { + pvcStateVpi INTEGER, + pvcStateVci INTEGER, + pvcStatePvid VlanIndex, + pvcStatePriority INTEGER, + --pvcStateCvid VlanIndex, + --pvcStateCPriority INTEGER, + --pvcStateMode DisplayString, + pvcStateChannelType DisplayString, + pvcStateEncap DisplayString + } + + pvcStateVpi OBJECT-TYPE + SYNTAX INTEGER (0..255) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "VPI of the pvc." + ::= { pvcStateEntry 1 } + + pvcStateVci OBJECT-TYPE + SYNTAX INTEGER (1..65535) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "VCI of the pvc." + ::= { pvcStateEntry 2 } + + pvcStatePvid OBJECT-TYPE + SYNTAX VlanIndex + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Default VID of the pvc." + ::= { pvcStateEntry 3 } + + pvcStatePriority OBJECT-TYPE + SYNTAX INTEGER (0..7) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "802.1p default priority of the pvc." + ::= { pvcStateEntry 4 } + + --pvcStateCvid OBJECT-TYPE + --SYNTAX VlanIndex + --MAX-ACCESS read-only + --STATUS current + --DESCRIPTION + --"Default C-VID for paepvc." + --::= { pvcStateEntry 5 } + + --pvcStateCPriority OBJECT-TYPE + --SYNTAX INTEGER (0..7) + --MAX-ACCESS read-only + --STATUS current + --DESCRIPTION + --"802.1p default C-priority for paepvc." + --::= { pvcStateEntry 6 } + + --pvcStateMode OBJECT-TYPE + --SYNTAX DisplayString (SIZE (1..31)) + --MAX-ACCESS read-only + --STATUS current + --DESCRIPTION + --"The value of this object identifies the link mode at runntime." + --::= { pvcStateEntry 7 } + + pvcStateChannelType OBJECT-TYPE + SYNTAX DisplayString (SIZE (1..31)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of this object identifies the channel type at runtime." + ::= { pvcStateEntry 8 } + + pvcStateEncap OBJECT-TYPE + SYNTAX DisplayString (SIZE (1..31)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of this object identifies the channel encapsulation at runtime." + ::= { pvcStateEntry 9 } + +-- Upstream Rate Limit Table + + pvcUsRateLimitTable OBJECT-TYPE + SYNTAX SEQUENCE OF PvcUsRateLimitEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table defines the upstream rate limit for each PVC." + ::= { pvc 4 } + + pvcUsRateLimitEntry OBJECT-TYPE + SYNTAX PvcUsRateLimitEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in pvcUsRateLimitTable." + INDEX { ifIndex, pvcVpi, pvcVci } + ::= { pvcUsRateLimitTable 1 } + + PvcUsRateLimitEntry ::= + SEQUENCE { + pvcUsRateLimitEnable INTEGER, + pvcUsRateLimit INTEGER + } + + pvcUsRateLimitEnable OBJECT-TYPE + SYNTAX INTEGER { + enable(1), + disable(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enable/disable upstream rate limit for a PVC." + ::= { pvcUsRateLimitEntry 1 } + + pvcUsRateLimit OBJECT-TYPE + SYNTAX INTEGER + UNITS "Kbps" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Upstream rate limit in Kbps for a PVC." + ::= { pvcUsRateLimitEntry 2 } + + +-------------------- +-- priority pvc +-------------------- + + maxNumOfPriorityPvcs OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The maximum number of priority PVCs which could be created on a port." + ::= { ppvc 1 } + +-- Priority PVC Table + + ppvcTable OBJECT-TYPE + SYNTAX SEQUENCE OF PpvcEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table includes priority PVC configuration." + ::= { ppvc 2 } + + ppvcEntry OBJECT-TYPE + SYNTAX PpvcEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in ppvcTable." + INDEX { ifIndex, ppvcVpi, ppvcVci, ppvcPvid } + ::= { ppvcTable 1 } + + PpvcEntry ::= + SEQUENCE { + ppvcVpi INTEGER, + ppvcVci INTEGER, + ppvcPvid VlanIndex, + ppvcEncap INTEGER, + ppvcPriority INTEGER, + ppvcRowStatus RowStatus + } + + ppvcVpi OBJECT-TYPE + SYNTAX INTEGER (0..255) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "VPI of the ppvc." + ::= { ppvcEntry 1 } + + ppvcVci OBJECT-TYPE + SYNTAX INTEGER (1..65535) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "VCI of the ppvc." + ::= { ppvcEntry 2 } + + ppvcPvid OBJECT-TYPE + SYNTAX VlanIndex + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Default VID of the ppvc." + ::= { ppvcEntry 3 } + + ppvcEncap OBJECT-TYPE + SYNTAX INTEGER { + llc(1), + vc(2) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Encapsulation of the ppvc." + ::= { ppvcEntry 4 } + + ppvcPriority OBJECT-TYPE + SYNTAX INTEGER (0..7) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "802.1p default priority of the ppvc." + ::= { ppvcEntry 5 } + + ppvcRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object is used to create a new row or delete an existing row in this table." + ::= { ppvcEntry 6 } + +-- Priority PVC Member Table + + ppvcMemberTable OBJECT-TYPE + SYNTAX SEQUENCE OF PpvcMemberEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table includes priority PVC member configuration." + ::= { ppvc 4 } + + ppvcMemberEntry OBJECT-TYPE + SYNTAX PpvcMemberEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in ppvcMemberTable." + INDEX { ifIndex, ppvcVpi, ppvcVci, ppvcMemberVpi, ppvcMemberVci, ppvcMemberPriority } + ::= { ppvcMemberTable 1 } + + PpvcMemberEntry ::= + SEQUENCE { + ppvcMemberVpi INTEGER, + ppvcMemberVci INTEGER, + ppvcMemberPriority INTEGER, + ppvcMemberProfileDS DisplayString, + ppvcMemberRowStatus RowStatus, + ppvcMemberProfileUS DisplayString + } + + ppvcMemberVpi OBJECT-TYPE + SYNTAX INTEGER (0..255) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "VPI of the member ppvc." + ::= { ppvcMemberEntry 1 } + + ppvcMemberVci OBJECT-TYPE + SYNTAX INTEGER (1..65535) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "VCI of the member ppvc." + ::= { ppvcMemberEntry 2 } + + ppvcMemberPriority OBJECT-TYPE + SYNTAX INTEGER (0..7) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "802.1p default priority of the member ppvc." + ::= { ppvcMemberEntry 3 } + + ppvcMemberProfileDS OBJECT-TYPE + SYNTAX DisplayString (SIZE (1..31)) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The profile of the member ppvc in DS side." + ::= { ppvcMemberEntry 4 } + + ppvcMemberRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object is used to create a new row or delete an existing row in this table." + ::= { ppvcMemberEntry 5 } + + ppvcMemberProfileUS OBJECT-TYPE + SYNTAX DisplayString (SIZE (1..31)) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The profile of the member ppvc in US side." + ::= { ppvcMemberEntry 6 } + +------------------------------- +-- 2684 routed mode pvc (rpvc) +------------------------------- + +-- Routed Gateway Table + + rpvcGatewayTable OBJECT-TYPE + SYNTAX SEQUENCE OF RpvcGatewayEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table includes Routed Gateway configuration." + ::= { rpvc 1 } + + rpvcGatewayEntry OBJECT-TYPE + SYNTAX RpvcGatewayEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in Routed Gateway table." + INDEX { rpvcGatewayIp } + ::= { rpvcGatewayTable 1 } + + RpvcGatewayEntry ::= + SEQUENCE { + rpvcGatewayIp IpAddress, + rpvcGatewayVlanId VlanIndex, + rpvcGatewayRowStatus RowStatus, + rpvcGatewayPriority INTEGER + } + + rpvcGatewayIp OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "IP of RPVC gateway." + ::= { rpvcGatewayEntry 1 } + + rpvcGatewayVlanId OBJECT-TYPE + SYNTAX VlanIndex + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Vlan id send to this RPVC gateway." + ::= { rpvcGatewayEntry 2 } + + rpvcGatewayRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object is used to create a new row or delete an existing row in this table." + ::= { rpvcGatewayEntry 3 } + + rpvcGatewayPriority OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "802.1p p bit send to this RPVC gateway." + ::= { rpvcGatewayEntry 4 } + +-- Routed PVC Table + + rpvcTable OBJECT-TYPE + SYNTAX SEQUENCE OF RpvcEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table includes RPVC configuration." + ::= { rpvc 2 } + + rpvcEntry OBJECT-TYPE + SYNTAX RpvcEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in rpvcTable." + INDEX { ifIndex, rpvcVpi, rpvcVci, rpvcIp, rpvcNetmask } + ::= { rpvcTable 1 } + + RpvcEntry ::= + SEQUENCE { + rpvcVpi INTEGER, + rpvcVci INTEGER, + rpvcDSProfile DisplayString, + rpvcUSProfile DisplayString, + rpvcIp IpAddress, + rpvcNetmask IpAddress, + rpvcGatewayIpAddress IpAddress, + rpvcRowStatus RowStatus + } + + rpvcVpi OBJECT-TYPE + SYNTAX INTEGER (0..255) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "VPI of the rpvc." + ::= { rpvcEntry 1 } + + rpvcVci OBJECT-TYPE + SYNTAX INTEGER (1..65535) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "VCI of the rpvc." + ::= { rpvcEntry 2 } + + rpvcDSProfile OBJECT-TYPE + SYNTAX DisplayString (SIZE (1..31)) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The down stream profile of the rpvc." + ::= { rpvcEntry 3 } + + rpvcUSProfile OBJECT-TYPE + SYNTAX DisplayString (SIZE (1..31)) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The up stream profile of the rpvc." + ::= { rpvcEntry 4 } + + rpvcIp OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The IP of the rpvc." + ::= { rpvcEntry 5 } + + rpvcNetmask OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The IP mask of the rpvc IP." + ::= { rpvcEntry 6 } + + rpvcGatewayIpAddress OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The gateway IP of rpvc." + ::= { rpvcEntry 7 } + + rpvcRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object is used to create a new row or delete an existing row in this table." + ::= { rpvcEntry 8 } + +-- Routed PVC Routed Domain Table + + rpvcRouteDomainTable OBJECT-TYPE + SYNTAX SEQUENCE OF RpvcRouteDomainEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table includes RPVC route domain configuration." + ::= { rpvc 3 } + + rpvcRouteDomainEntry OBJECT-TYPE + SYNTAX RpvcRouteDomainEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in rpvcRouteDomainTable." + INDEX { ifIndex, rpvcRouteDomainVpi, rpvcRouteDomainVci, rpvcRouteDomainIp, rpvcRouteDomainNetmask } + ::= { rpvcRouteDomainTable 1 } + + RpvcRouteDomainEntry ::= + SEQUENCE { + rpvcRouteDomainVpi INTEGER, + rpvcRouteDomainVci INTEGER, + rpvcRouteDomainIp IpAddress, + rpvcRouteDomainNetmask IpAddress, + rpvcRouteDomainRowStatus RowStatus + } + + rpvcRouteDomainVpi OBJECT-TYPE + SYNTAX INTEGER (0..255) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "VPI of the rpvc." + ::= { rpvcRouteDomainEntry 1 } + + rpvcRouteDomainVci OBJECT-TYPE + SYNTAX INTEGER (1..65535) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "VCI of the rpvc." + ::= { rpvcRouteDomainEntry 2 } + + rpvcRouteDomainIp OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The route domain IP." + ::= { rpvcRouteDomainEntry 3 } + + rpvcRouteDomainNetmask OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The IP mask of the route domain IP." + ::= { rpvcRouteDomainEntry 4 } + + rpvcRouteDomainRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object is used to create a new row or delete an existing row in this table." + ::= { rpvcRouteDomainEntry 5 } + + rpvcArpAgingTime OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Set RPVC ARP proxy aging time 10..10000 seconds, + 0 to disable againg." + ::= { rpvc 4 } + + rpvcArpFlush OBJECT-TYPE + SYNTAX INTEGER { + enable(1) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Flush the RPVC ARP proxy table." + ::= { rpvc 5 } + +-------------------- +-- dsBcastDisableTable +-------------------- + + dsBcastDisableTable OBJECT-TYPE + SYNTAX SEQUENCE OF DsBcastDisableEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table includes Down Stream Bcast configuration." + ::= { port 9 } + + dsBcastDisableEntry OBJECT-TYPE + SYNTAX DsBcastDisableEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in Down Stream Bcast table." + INDEX { ifIndex, dsBcastDisableVlanId } + ::= { dsBcastDisableTable 1 } + + DsBcastDisableEntry ::= + SEQUENCE { + dsBcastDisableVlanId INTEGER, + dsBcastDisableRowStatus RowStatus + } + + dsBcastDisableVlanId OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "downstream broadcast disabled vid." + ::= { dsBcastDisableEntry 1 } + + dsBcastDisableRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object is used to create a new row or delete an existing row in this table." + ::= { dsBcastDisableEntry 2 } + +-------------------- +-- paepvc +-------------------- + +-- PPPoAoE PVC Table + + paepvcTable OBJECT-TYPE + SYNTAX SEQUENCE OF PaepvcEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table includes PPPoAoE PVC configuration." + ::= { paepvc 1 } + + paepvcEntry OBJECT-TYPE + SYNTAX PaepvcEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry of paepvcTable." + INDEX { ifIndex, paepvcVpi, paepvcVci, paepvcPvid } + ::= { paepvcTable 1 } + + PaepvcEntry ::= + SEQUENCE { + paepvcVpi INTEGER, + paepvcVci INTEGER, + paepvcPvid VlanIndex, + paepvcPriority INTEGER, + paepvcProfileDS DisplayString, + paepvcAcName DisplayString, + paepvcServiceName DisplayString, + paepvcHelloTime INTEGER, + paepvcRowStatus RowStatus, + paepvcProfileUS DisplayString, + paepvcCvid VlanIndex, + paepvcCPriority INTEGER + + } + + paepvcVpi OBJECT-TYPE + SYNTAX INTEGER (0..255) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "VPI of the pvc." + ::= { paepvcEntry 1 } + + paepvcVci OBJECT-TYPE + SYNTAX INTEGER (1..65535) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "VCI of the pvc." + ::= { paepvcEntry 2 } + + paepvcPvid OBJECT-TYPE + SYNTAX VlanIndex + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Default VID of the pvc." + ::= { paepvcEntry 3 } + + + paepvcPriority OBJECT-TYPE + SYNTAX INTEGER (0..7) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "802.1p default priority of the pvc." + ::= { paepvcEntry 5 } + + paepvcProfileDS OBJECT-TYPE + SYNTAX DisplayString (SIZE (1..31)) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The value of this object identifies the row in the atmProfileTable, + which applies for this pvc in DS side." + ::= { paepvcEntry 6 } + + paepvcAcName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Access concentrator name." + ::= { paepvcEntry 7 } + + paepvcServiceName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Service name." + ::= { paepvcEntry 8 } + + paepvcHelloTime OBJECT-TYPE + SYNTAX INTEGER + UNITS "second" + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The system will close the PVC if there are not any LCP echo messages passed through + during the LCP hello time." + ::= { paepvcEntry 9 } + + paepvcRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object is used to create a new row or delete an existing row in this table." + ::= { paepvcEntry 10 } + + paepvcProfileUS OBJECT-TYPE + SYNTAX DisplayString (SIZE (1..31)) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The value of this object identifies the row in the atmProfileTable, + which applies for this pvc in US side." + ::= { paepvcEntry 11 } + + paepvcCvid OBJECT-TYPE + SYNTAX VlanIndex + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Default C-VID of the pvc." + ::= { paepvcEntry 12 } + + + paepvcCPriority OBJECT-TYPE + SYNTAX INTEGER (0..7) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "802.1p default C-priority of the pvc." + ::= { paepvcEntry 13 } + + +-------------------- +-- tlspvc +-------------------- + +-- TLS PVC Table + + tlspvcTable OBJECT-TYPE + SYNTAX SEQUENCE OF TlspvcEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table includes Transparent LAN Service (TLS) PVC configuration." + ::= { tlspvc 1 } + + tlspvcEntry OBJECT-TYPE + SYNTAX TlspvcEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry of tlspvcTable." + INDEX { ifIndex, tlspvcVpi, tlspvcVci, tlspvcSvid } + ::= { tlspvcTable 1 } + + TlspvcEntry ::= + SEQUENCE { + tlspvcVpi INTEGER, + tlspvcVci INTEGER, + tlspvcSvid VlanIndex, + tlspvcSpriority INTEGER, + tlspvcProfileDS DisplayString, + tlspvcRowStatus RowStatus, + tlspvcProfileUS DisplayString + } + + tlspvcVpi OBJECT-TYPE + SYNTAX INTEGER (0..255) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "VPI of the pvc." + ::= { tlspvcEntry 1 } + + tlspvcVci OBJECT-TYPE + SYNTAX INTEGER (1..65535) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "VCI of the pvc." + ::= { tlspvcEntry 2 } + + tlspvcSvid OBJECT-TYPE + SYNTAX VlanIndex + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "s-tag VLAN ID of the pvc." + ::= { tlspvcEntry 3 } + + + tlspvcSpriority OBJECT-TYPE + SYNTAX INTEGER (0..7) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "s-tag priority of the pvc." + ::= { tlspvcEntry 5 } + + tlspvcProfileDS OBJECT-TYPE + SYNTAX DisplayString (SIZE (1..31)) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The value of this object identifies the row in the atmProfileTable, + which applies for this pvc in DS side." + ::= { tlspvcEntry 6 } + + tlspvcRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object is used to create a new row or delete an existing row in this table." + ::= { tlspvcEntry 7 } + + tlspvcProfileUS OBJECT-TYPE + SYNTAX DisplayString (SIZE (1..31)) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The value of this object identifies the row in the atmProfileTable, + which applies for this pvc in US side." + ::= { tlspvcEntry 8 } + +-------------------- +-- ipbpvc +-------------------- + +-- Domain Table + + ipbpvcDomainTable OBJECT-TYPE + SYNTAX SEQUENCE OF IpbpvcDomainEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table includes ipbpvc domain configuration. + This table is supported by R3.00 and later versions." + ::= { ipbpvc 1 } + + ipbpvcDomainEntry OBJECT-TYPE + SYNTAX IpbpvcDomainEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry of ipbpvcDomainTable." + INDEX { ipbpvcDomainName } + ::= { ipbpvcDomainTable 1 } + + IpbpvcDomainEntry ::= + SEQUENCE { + ipbpvcDomainName OCTET STRING, + ipbpvcDomainRowStatus RowStatus + } + + ipbpvcDomainName OBJECT-TYPE + SYNTAX OCTET STRING + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Name of the domain." + ::= { ipbpvcDomainEntry 1 } + + ipbpvcDomainRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Row status of the table." + ::= { ipbpvcDomainEntry 2 } + +-- Domain VLAN Table + + ipbpvcDomainVlanTable OBJECT-TYPE + SYNTAX SEQUENCE OF IpbpvcDomainVlanEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table includes ipbpvc domain VLAN configuration. + This table is supported by R3.00 and later versions." + ::= { ipbpvc 2 } + + ipbpvcDomainVlanEntry OBJECT-TYPE + SYNTAX IpbpvcDomainVlanEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry of ipbpvcDomainVlanTable." + INDEX { ipbpvcDomainName, ipbpvcDomainVlanId } + ::= { ipbpvcDomainVlanTable 1 } + + IpbpvcDomainVlanEntry ::= + SEQUENCE { + ipbpvcDomainVlanId VlanIndex, + ipbpvcDomainDhcpVlanEnable INTEGER, + ipbpvcDomainVlanRowStatus RowStatus + } + + ipbpvcDomainVlanId OBJECT-TYPE + SYNTAX VlanIndex + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Set VLAN to join or leave the specified domain." + ::= { ipbpvcDomainVlanEntry 1 } + + ipbpvcDomainDhcpVlanEnable OBJECT-TYPE + SYNTAX INTEGER { + enable(1), + disable(2) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Enable/disable DHCP VLAN in a domain." + ::= { ipbpvcDomainVlanEntry 2 } + + ipbpvcDomainVlanRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Row status of the table used to create/delete an entry." + ::= { ipbpvcDomainVlanEntry 3 } + +-- Edge Router Table + + ipbpvcEdgeRouterTable OBJECT-TYPE + SYNTAX SEQUENCE OF IpbpvcEdgeRouterEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table includes ipbpvc edge router configuration. + This table is supported by R3.00 and later versions." + ::= { ipbpvc 3 } + + ipbpvcEdgeRouterEntry OBJECT-TYPE + SYNTAX IpbpvcEdgeRouterEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry of ipbpvcEdgeRouterTable." + INDEX { ipbpvcDomainName, ipbpvcEdgeRouterIp, ipbpvcEdgeRouterMask, ipbpvcEdgeRouterVid } + ::= { ipbpvcEdgeRouterTable 1 } + + IpbpvcEdgeRouterEntry ::= + SEQUENCE { + ipbpvcEdgeRouterIp IpAddress, + ipbpvcEdgeRouterMask INTEGER, + ipbpvcEdgeRouterVid VlanIndex, + ipbpvcEdgeRouterRowStatus RowStatus + } + + ipbpvcEdgeRouterIp OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "IP address of the edge router." + ::= { ipbpvcEdgeRouterEntry 1 } + + ipbpvcEdgeRouterVid OBJECT-TYPE + SYNTAX VlanIndex + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "VLAN ID of the edge router." + ::= { ipbpvcEdgeRouterEntry 2 } + + ipbpvcEdgeRouterMask OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Netmask of the edge router." + ::= { ipbpvcEdgeRouterEntry 3 } + + ipbpvcEdgeRouterRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Row status of the table used to create/delete an entry." + ::= { ipbpvcEdgeRouterEntry 4 } + +-- Interface Table + + ipbpvcInterfaceTable OBJECT-TYPE + SYNTAX SEQUENCE OF IpbpvcInterfaceEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table includes ipbpvc interface configuration. + This table is supported by R3.00 and later versions." + ::= { ipbpvc 4 } + + ipbpvcInterfaceEntry OBJECT-TYPE + SYNTAX IpbpvcInterfaceEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry of ipbpvcInterfaceTable." + INDEX { ipbpvcDomainName, ipbpvcInterfaceIp, ipbpvcInterfaceMask, ipbpvcInterfaceVid } + ::= { ipbpvcInterfaceTable 1 } + + IpbpvcInterfaceEntry ::= + SEQUENCE { + ipbpvcInterfaceIp IpAddress, + ipbpvcInterfaceMask INTEGER, + ipbpvcInterfaceVid VlanIndex, + ipbpvcInterfaceIfIndex INTEGER, + ipbpvcInterfaceVpi INTEGER, + ipbpvcInterfaceVci INTEGER, + ipbpvcInterfaceRowStatus RowStatus + } + + ipbpvcInterfaceIp OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "IP address of the interface." + ::= { ipbpvcInterfaceEntry 1 } + + ipbpvcInterfaceMask OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Netmask of the interface." + ::= { ipbpvcInterfaceEntry 2 } + + ipbpvcInterfaceVid OBJECT-TYPE + SYNTAX VlanIndex + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "VLAN ID of the interface." + ::= { ipbpvcInterfaceEntry 3 } + + ipbpvcInterfaceIfIndex OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "IfIndex of the interface." + ::= { ipbpvcInterfaceEntry 4 } + + ipbpvcInterfaceVpi OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "VPI of the interface." + ::= { ipbpvcInterfaceEntry 5 } + + ipbpvcInterfaceVci OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "VCI of the interface." + ::= { ipbpvcInterfaceEntry 6 } + + ipbpvcInterfaceRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Row status of the table used to create/delete an entry." + ::= { ipbpvcInterfaceEntry 7 } + +-- Route Table + + ipbpvcRouteTable OBJECT-TYPE + SYNTAX SEQUENCE OF IpbpvcRouteEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table includes ipbpvc route configuration. + This table is supported by R3.00 and later versions." + ::= { ipbpvc 5 } + + ipbpvcRouteEntry OBJECT-TYPE + SYNTAX IpbpvcRouteEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry of ipbpvcRouteTable." + INDEX { ipbpvcDomainName, ipbpvcRouteIp, ipbpvcRouteMask, ipbpvcRouteNextHop } + ::= { ipbpvcRouteTable 1 } + + IpbpvcRouteEntry ::= + SEQUENCE { + ipbpvcRouteIp IpAddress, + ipbpvcRouteMask INTEGER, + ipbpvcRouteNextHop IpAddress, + ipbpvcRouteMetric INTEGER, + ipbpvcRoutePriority INTEGER, + ipbpvcRouteRowStatus RowStatus + } + + ipbpvcRouteIp OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "IP address of the route." + ::= { ipbpvcRouteEntry 1 } + + ipbpvcRouteMask OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Netmask of the route." + ::= { ipbpvcRouteEntry 2 } + + ipbpvcRouteNextHop OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Next hop IP address of the route." + ::= { ipbpvcRouteEntry 3 } + + ipbpvcRouteMetric OBJECT-TYPE + SYNTAX INTEGER (1..15) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Metric of the route." + ::= { ipbpvcRouteEntry 4 } + + ipbpvcRoutePriority OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Priority of the route. Note that the default value of this object is 8, which means + we keep the original priority of the packet(frame)." + ::= { ipbpvcRouteEntry 5 } + + ipbpvcRouteRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Row status of the table used to create/delete an entry." + ::= { ipbpvcRouteEntry 6 } + +-- PVC Table + + ipbpvcTable OBJECT-TYPE + SYNTAX SEQUENCE OF IpbpvcEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table includes ipbpvc configuration. + This table is supported by R3.00 and later versions." + ::= { ipbpvc 6 } + + ipbpvcEntry OBJECT-TYPE + SYNTAX IpbpvcEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry of ipbpvcTable." + INDEX { ifIndex, ipbpvcVpi, ipbpvcVci, ipbpvcPvid } + ::= { ipbpvcTable 1 } + + IpbpvcEntry ::= + SEQUENCE { + ipbpvcVpi INTEGER, + ipbpvcVci INTEGER, + ipbpvcPvid INTEGER, + ipbpvcEncap INTEGER, + ipbpvcPriority INTEGER, + ipbpvcProfile OCTET STRING, + ipbpvcRowStatus RowStatus, + ipbpvcProfileUS OCTET STRING + } + + ipbpvcVpi OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "VPI of the PVC." + ::= { ipbpvcEntry 1 } + + ipbpvcVci OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "VCI of the PVC." + ::= { ipbpvcEntry 2 } + + ipbpvcPvid OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "PVID of the PVC." + ::= { ipbpvcEntry 3 } + + ipbpvcEncap OBJECT-TYPE + SYNTAX INTEGER { + ipoe(1), + reserved(2), + ipoa(3) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Type of the PVC." + ::= { ipbpvcEntry 4 } + + ipbpvcPriority OBJECT-TYPE + SYNTAX INTEGER (0..7) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Priority of the PVC." + ::= { ipbpvcEntry 5 } + + ipbpvcProfile OBJECT-TYPE + SYNTAX OCTET STRING + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Profile of the PVC." + ::= { ipbpvcEntry 6 } + + ipbpvcRowStatus OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Row status of the table used to create/delete an entry." + ::= { ipbpvcEntry 7 } + + ipbpvcProfileUS OBJECT-TYPE + SYNTAX OCTET STRING + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "US Profile of the PVC." + ::= { ipbpvcEntry 8 } + +-- ARP Proxy + + arpproxy OBJECT IDENTIFIER ::= { ipbpvc 8 } + + arpproxyAge OBJECT-TYPE + SYNTAX INTEGER (10..10000) + UNITS "second" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Aging time of the ARP proxy. + This object is supported by R3.00 and later versions." + ::= { arpproxy 1 } + + arpproxyFlush OBJECT IDENTIFIER ::= { arpproxy 2 } + + arpproxyFlushTarget OBJECT-TYPE + SYNTAX INTEGER { + all(1), + edgerouter(2), + interface(3) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The target whose ARP table to be flushed. + This object is supported by R3.00 and later versions." + ::= { arpproxyFlush 1 } + + arpproxyFlushOps OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Set the object to 1 to start flushing. + This object is supported by R3.00 and later versions." + ::= { arpproxyFlush 2 } + + arpproxyFlushEdgeRouterIp OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Flush ARP table for the specified edge router. + This object is supported by R3.00 and later versions." + ::= { arpproxyFlush 3 } + + arpproxyFlushEdgeRouterVid OBJECT-TYPE + SYNTAX VlanIndex + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Flush ARP table for the specified edge router. + This object is supported by R3.00 and later versions." + ::= { arpproxyFlush 4 } + + arpproxyFlushInterfaceIp OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Flush ARP table for the specified interface. + This object is supported by R3.00 and later versions." + ::= { arpproxyFlush 5 } + + arpproxyFlushInterfaceMask OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Flush ARP table for the specified interface. + This object is supported by R3.00 and later versions." + ::= { arpproxyFlush 6 } + + arpproxyFlushInterfaceVid OBJECT-TYPE + SYNTAX VlanIndex + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Flush ARP table for the specified interface. + This object is supported by R3.00 and later versions." + ::= { arpproxyFlush 7 } + +-------------------- +-- dtpvc +-------------------- + +-- DT PVC Table + + dtpvcTable OBJECT-TYPE + SYNTAX SEQUENCE OF DtpvcEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table includes Double Tagging (DT) PVC configuration." + ::= { dtpvc 1 } + + dtpvcEntry OBJECT-TYPE + SYNTAX DtpvcEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry of dtpvcTable." + INDEX { ifIndex, dtpvcVpi, dtpvcVci, dtpvcSvid } + ::= { dtpvcTable 1 } + + DtpvcEntry ::= + SEQUENCE { + -- Common -- + dtpvcVpi INTEGER, + dtpvcVci INTEGER, + dtpvcSvid VlanIndex, + dtpvcSpriority INTEGER, + dtpvcCvid VlanIndex, + dtpvcCpriority INTEGER, + dtpvcDSProfile DisplayString, + dtpvcUSProfile DisplayString, + dtpvcRowStatus RowStatus, + -- Only for dtpvc -- + dtpvcSuperChannel INTEGER, + -- Only for paepvc -- + dtpvcAcName DisplayString, + dtpvcServiceName DisplayString, + dtpvcHelloTime INTEGER + } + + -- Common -- + dtpvcVpi OBJECT-TYPE + SYNTAX INTEGER (0..255) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "VPI of the pvc." + ::= { dtpvcEntry 1 } + + dtpvcVci OBJECT-TYPE + SYNTAX INTEGER (1..65535) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "VCI of the pvc." + ::= { dtpvcEntry 2 } + + dtpvcSvid OBJECT-TYPE + SYNTAX VlanIndex + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "s-tag VLAN ID of the pvc." + ::= { dtpvcEntry 3 } + + dtpvcSpriority OBJECT-TYPE + SYNTAX INTEGER (0..7) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "s-tag priority of the pvc." + ::= { dtpvcEntry 4 } + + dtpvcCvid OBJECT-TYPE + SYNTAX VlanIndex + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "c-tag VLAN ID of the pvc." + ::= { dtpvcEntry 5 } + + dtpvcCpriority OBJECT-TYPE + SYNTAX INTEGER (0..7) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "c-tag priority of the pvc." + ::= { dtpvcEntry 6 } + + dtpvcDSProfile OBJECT-TYPE + SYNTAX DisplayString (SIZE (1..31)) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The value of this object identifies the row in the atmProfileTable, which applies for this dtpvc in DS side." + ::= { dtpvcEntry 7 } + + dtpvcUSProfile OBJECT-TYPE + SYNTAX DisplayString (SIZE (1..31)) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The value of this object identifies the row in the atmProfileTable, which applies for this dtpvc in US side." + ::= { dtpvcEntry 8 } + + dtpvcRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object is used to create a new row or delete an existing row in this table." + ::= { dtpvcEntry 9 } + + -- Only for DTPVC -- + dtpvcSuperChannel OBJECT-TYPE + SYNTAX INTEGER { + enable(1), + disable(2) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Specified the configured DTPVC is a super channel." + ::= { dtpvcEntry 10 } + + -- Only for PAEPVC -- + dtpvcAcName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Access concentrator name for paepvc." + ::= { dtpvcEntry 11 } + + dtpvcServiceName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Service name for paepvc." + ::= { dtpvcEntry 12 } + + dtpvcHelloTime OBJECT-TYPE + SYNTAX INTEGER + UNITS "second" + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The system will close the PVC if there are not any LCP echo messages passed through during the LCP hello time." + ::= { dtpvcEntry 13 } + +-- DTPVC state -- + dtpvcStateTable OBJECT-TYPE + SYNTAX SEQUENCE OF DtpvcStateEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table show current DTPVC status." + ::= { dtpvc 2 } + + dtpvcStateEntry OBJECT-TYPE + SYNTAX DtpvcStateEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in dtpvcStateTable." + INDEX { ifIndex, dtpvcStateVpi, dtpvcStateVci, dtpvcStateSvid } + ::= { dtpvcStateTable 1 } + + DtpvcStateEntry ::= + SEQUENCE { + dtpvcStateVpi INTEGER, + dtpvcStateVci INTEGER, + dtpvcStateSvid VlanIndex, + dtpvcStateSPriority INTEGER, + dtpvcStateCvid VlanIndex, + dtpvcStateCPriority INTEGER, + --dtpvcStateMode DisplayString, + dtpvcStateChannelType DisplayString, + dtpvcStateEncap DisplayString + } + + dtpvcStateVpi OBJECT-TYPE + SYNTAX INTEGER (0..255) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "VPI of the dtpvc." + ::= { dtpvcStateEntry 1 } + + dtpvcStateVci OBJECT-TYPE + SYNTAX INTEGER (1..65535) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "VCI of the dtpvc." + ::= { dtpvcStateEntry 2 } + + dtpvcStateSvid OBJECT-TYPE + SYNTAX VlanIndex + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Default S-VID of the dtpvc." + ::= { dtpvcStateEntry 3 } + + dtpvcStateSPriority OBJECT-TYPE + SYNTAX INTEGER (0..7) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "S-priority of the dtpvc." + ::= { dtpvcStateEntry 4 } + + dtpvcStateCvid OBJECT-TYPE + SYNTAX VlanIndex + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Default C-VID of the dtpvc." + ::= { dtpvcStateEntry 5 } + + dtpvcStateCPriority OBJECT-TYPE + SYNTAX INTEGER (0..7) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "C-priority of the dtpvc." + ::= { dtpvcStateEntry 6 } + + --dtpvcStateMode OBJECT-TYPE + --SYNTAX DisplayString (SIZE (1..31)) + --MAX-ACCESS read-only + --STATUS current + --DESCRIPTION + --"The value of this object identifies the link mode at runntime." + --::= { dtpvcStateEntry 7 } + + dtpvcStateChannelType OBJECT-TYPE + SYNTAX DisplayString (SIZE (1..31)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of this object identifies the channel type at runtime." + ::= { dtpvcStateEntry 8 } + + dtpvcStateEncap OBJECT-TYPE + SYNTAX DisplayString (SIZE (1..31)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of this object identifies the channel encapsulation at runtime." + ::= { dtpvcStateEntry 9 } + + +-------------------- +-- gbond +-------------------- + +-- gbondTable + + gbondGroupTable OBJECT-TYPE + SYNTAX SEQUENCE OF GbondGroupEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table containing the G.Bond configuration information for + each bonding group of the device." + ::= { gbond 1 } + + gbondGroupEntry OBJECT-TYPE + SYNTAX GbondGroupEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry of gbondTable." + INDEX { gbondGroupName } + ::= { gbondGroupTable 1 } + + GbondGroupEntry ::= + SEQUENCE { + gbondGroupName OCTET STRING, + gbondGroupPorts OCTET STRING, +-- gbondGroupSid INTEGER, + gbondGroupUpRate Unsigned32, + gbondGroupDownRate Unsigned32, + gbondGroupRowStatus RowStatus + } + + gbondGroupName OBJECT-TYPE + SYNTAX OCTET STRING (SIZE (0..31)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "An administratively assigned string, which may be used to identify bonding group." + ::= { gbondGroupEntry 1 } + + gbondGroupPorts OBJECT-TYPE + SYNTAX OCTET STRING + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The set of ports which are currently assigned to the + bonding group of specified group name. + Byte 1: Reserved(chassis) + Byte 2~3: Reserved(slot) + Byte 4: Reserved + Byte 5~11:each octet specifies a set of eight ports, with the first + octet specifying ports 1 through 8, etc." + ::= { gbondGroupEntry 2 } + +-- gbondGroupSid OBJECT-TYPE +-- SYNTAX INTEGER { +-- sid8(1), +-- sid12(2) +-- } +-- MAX-ACCESS read-create +-- STATUS current +-- DESCRIPTION +-- "This object indicates the sequence index mode of the bonding group." +-- ::= { gbondGroupEntry 3 } + + gbondGroupUpRate OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The UP stream rate." + ::= { gbondGroupEntry 4 } + + gbondGroupDownRate OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The DOWN stream rate." + ::= { gbondGroupEntry 5 } + + gbondGroupRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object indicates the status of this entry." + ::= { gbondGroupEntry 6 } +-------------------- +-- snrMgn +-------------------- + +-- snrMgnTable + + snrMgnTable OBJECT-TYPE + SYNTAX SEQUENCE OF SnrMarginEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table containing the per port SNR Margin configuration." + ::= { snrMgn 1 } + + snrMgnEntry OBJECT-TYPE + SYNTAX SnrMarginEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry of snrMgnTable." + INDEX { ifIndex } + ::= { snrMgnTable 1 } + + SnrMarginEntry ::= + SEQUENCE { + snrMgnMode INTEGER, + snrMgnUcTarget INTEGER, + snrMgnUcMax INTEGER, + snrMgnUcMin INTEGER, + snrMgnUcDownshift INTEGER, + snrMgnUcUpshift INTEGER, + snrMgnUrTarget INTEGER, + snrMgnUrMax INTEGER, + snrMgnUrMin INTEGER, + snrMgnUrDownshift INTEGER, + snrMgnUrUpshift INTEGER + } + + snrMgnMode OBJECT-TYPE + SYNTAX INTEGER { + profile(0), + line(1) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Configure DSL SNR margin configuration mode of the specified ports. + Profile: the SNR margin configuration comes from DSL profile. + Line: the SNR margin configuration comes from line configuration." + ::= { snrMgnEntry 1 } + + snrMgnUcTarget OBJECT-TYPE + SYNTAX INTEGER (0..310) + UNITS "tenth dB" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Configured Target Signal/Noise Margin. + This is the Noise Margin the modem must achieve + with a BER of 10-7 or better to successfully complete + initialization." + ::= { snrMgnEntry 2 } + + snrMgnUcMax OBJECT-TYPE + SYNTAX INTEGER (0..310) + UNITS "tenth dB" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Configured Maximum acceptable Signal/Noise Margin. + If the Noise Margin is above this the modem should + attempt to reduce its power output to optimize its + operation." + ::= { snrMgnEntry 3 } + + snrMgnUcMin OBJECT-TYPE + SYNTAX INTEGER (0..310) + UNITS "tenth dB" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Configured Minimum acceptable Signal/Noise Margin. + If the noise margin falls below this level, the modem + should attempt to increase its power output. If that + is not possible the modem will attempt to + re-initialize or shut down." + ::= { snrMgnEntry 4 } + + snrMgnUcDownshift OBJECT-TYPE + SYNTAX INTEGER (0..310) + UNITS "tenth dB" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Configured Signal/Noise Margin for rate downshift. + If the noise margin falls below this level, the modem + should attempt to decrease its transmit rate. In + the case that RADSL mode is not present, + the value will be `0'." + ::= { snrMgnEntry 5 } + + snrMgnUcUpshift OBJECT-TYPE + SYNTAX INTEGER (0..310) + UNITS "tenth dB" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Configured Signal/Noise Margin for rate upshift. + If the noise margin rises above this level, the modem + should attempt to increase its transmit rate. In + the case that RADSL is not present, the value will + be `0'." + ::= { snrMgnEntry 6 } + + snrMgnUrTarget OBJECT-TYPE + SYNTAX INTEGER (0..310) + UNITS "tenth dB" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Configured Target Signal/Noise Margin. + This is the Noise Margin the modem must achieve + with a BER of 10-7 or better to successfully complete + initialization." + ::= { snrMgnEntry 7 } + + snrMgnUrMax OBJECT-TYPE + SYNTAX INTEGER (0..310) + UNITS "tenth dB" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Configured Maximum acceptable Signal/Noise Margin. + If the Noise Margin is above this the modem should + attempt to reduce its power output to optimize its + operation." + ::= { snrMgnEntry 8 } + + snrMgnUrMin OBJECT-TYPE + SYNTAX INTEGER (0..310) + UNITS "tenth dB" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Configured Minimum acceptable Signal/Noise Margin. + If the noise margin falls below this level, the modem + should attempt to increase its power output. If that + is not possible the modem will attempt to + re-initialize or shut down." + ::= { snrMgnEntry 9 } + + snrMgnUrDownshift OBJECT-TYPE + SYNTAX INTEGER (0..310) + UNITS "tenth dB" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Configured Signal/Noise Margin for rate downshift. + If the noise margin falls below this level, the modem + should attempt to decrease its transmit rate. + In the case that RADSL mode is not present, + the value will be `0'." + ::= { snrMgnEntry 10 } + + snrMgnUrUpshift OBJECT-TYPE + SYNTAX INTEGER (0..310) + UNITS "tenth dB" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Configured Signal/Noise Margin for rate upshift. + If the noise margin rises above this level, the modem + should attempt to increase its transmit rate. + In the case that RADSL is not present, + the value will be `0'." + ::= { snrMgnEntry 11 } + +-------------------- +-- dsl rate +-------------------- + +-- dslRateTable + + dslRateTable OBJECT-TYPE + SYNTAX SEQUENCE OF DslRateEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table containing the per port DSL Rate configuration." + ::= { dslRate 1 } + + dslRateEntry OBJECT-TYPE + SYNTAX DslRateEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry of dslRateTable." + INDEX { ifIndex } + ::= { dslRateTable 1 } + + DslRateEntry ::= + SEQUENCE { + dslRateMode INTEGER, + dslRateLatencyMode INTEGER, + dslRateXtucMaxInterleaveDelay INTEGER, + dslRateXtucMaxTxRate Unsigned32, + dslRateXtucMinTxRate Unsigned32, + dslRateXturMaxInterleaveDelay INTEGER, + dslRateXturMaxTxRate Unsigned32, + dslRateXturMinTxRate Unsigned32 + } + + dslRateMode OBJECT-TYPE + SYNTAX INTEGER { + profile(0), + line(1) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Configure DSL Rate configuration mode of the specified ports. + Profile: the DSL Rate configuration comes from DSL profile. + Line: the DSL Rate configuration comes from line configuration." + ::= { dslRateEntry 1 } + + dslRateLatencyMode OBJECT-TYPE + SYNTAX INTEGER { + interleave(1), + fast(2) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The latency mode is fast or interleave" + ::= { dslRateEntry 2 } + + dslRateXtucMaxInterleaveDelay OBJECT-TYPE + SYNTAX INTEGER (0..255) + UNITS "milli-seconds" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Configured maximum Interleave Delay for this channel. + + Interleave delay applies only to the interleave channel + and defines the mapping (relative spacing) between + subsequent input bytes at the interleaver input and + their placement in the bit stream at the interleaver + output. Larger numbers provide greater separation + between consecutive input bytes in the output bit + stream allowing for improved impulse noise immunity + at the expense of payload latency." + ::= { dslRateEntry 3 } + + dslRateXtucMaxTxRate OBJECT-TYPE + SYNTAX Unsigned32 + UNITS "kbps" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Configured Maximum Transmit rate for `Fast' or `Interleave' channels, + in bps." + ::= { dslRateEntry 4 } + + dslRateXtucMinTxRate OBJECT-TYPE + SYNTAX Unsigned32 + UNITS "kbps" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Configured Minimum Transmit rate for `Fast' or `Interleave' channels, + in bps" + ::= { dslRateEntry 5 } + + dslRateXturMaxInterleaveDelay OBJECT-TYPE + SYNTAX INTEGER (0..255) + UNITS "milli-seconds" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Configured maximum Interleave Delay for this channel. + + Interleave delay applies only to the interleave channel + and defines the mapping (relative spacing) between + subsequent input bytes at the interleaver input and + their placement in the bit stream at the interleaver + output. Larger numbers provide greater separation + between consecutive input bytes in the output bit + stream allowing for improved impulse noise immunity + at the expense of payload latency" + ::= { dslRateEntry 6 } + + dslRateXturMaxTxRate OBJECT-TYPE + SYNTAX Unsigned32 + UNITS "kbps" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Configured Target Signal/Noise Margin. + This is the Noise Margin the modem must achieve + with a BER of 10-7 or better to successfully complete + initialization." + ::= { dslRateEntry 7 } + + dslRateXturMinTxRate OBJECT-TYPE + SYNTAX Unsigned32 + UNITS "kbps" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Configured Maximum Transmit rate for `Fast' or `Interleave' channels, + in bps." + ::= { dslRateEntry 8 } + +---------------------------------------- +-- switch +---------------------------------------- + + dscp OBJECT IDENTIFIER ::= { switch 10 } + vlanIsolation OBJECT IDENTIFIER ::= { switch 12 } + enetMtu OBJECT IDENTIFIER ::= { switch 13 } +-- cfm OBJECT IDENTIFIER ::= { switch 14 } + +-- Standalone IP DSLAM puts all ACL features in 'switch', from OID 51 + dhcp OBJECT IDENTIFIER ::= { switch 51 } + macfilter OBJECT IDENTIFIER ::= { switch 53 } + dhcpSnoop OBJECT IDENTIFIER ::= { switch 55 } + acl OBJECT IDENTIFIER ::= { switch 56 } + pppoeAgent OBJECT IDENTIFIER ::= { switch 57 } + macff OBJECT IDENTIFIER ::= { switch 60 } + +-------------------- +-- dscp +-------------------- + + dscpMappingTable OBJECT-TYPE + SYNTAX SEQUENCE OF DscpMappingEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The table contains DSCP mapping configuration for the adsl and ethernet ports." + ::= { dscp 1 } + + dscpMappingEntry OBJECT-TYPE + SYNTAX DscpMappingEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry of dscpMappingTable." + INDEX { dscpSrcCodePoint } + ::= { dscpMappingTable 1 } + + DscpMappingEntry ::= + SEQUENCE { + dscpSrcCodePoint INTEGER, +-- dscpMapCodePoint INTEGER, + dscpMapPriority INTEGER + } + + dscpSrcCodePoint OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The DSCP source code point used for mapping." + ::= { dscpMappingEntry 1 } + +-- dscpMapCodePoint OBJECT-TYPE +-- SYNTAX INTEGER (0..63) +-- MAX-ACCESS read-write +-- STATUS current +-- DESCRIPTION +-- "The mapping code point that will replace the source code point in the incoming packet." +-- ::= { dscpMappingEntry 2 } + + dscpMapPriority OBJECT-TYPE + SYNTAX INTEGER (0..7) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The mapping p bits that will replace the source p bits in the incoming packet." + ::= { dscpMappingEntry 3 } + +--- pfchen + dscpPortTable OBJECT-TYPE + SYNTAX SEQUENCE OF DscpPortEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The table contains DSCP mapping configuration for the adsl and ethernet ports." + ::= { dscp 2 } + + dscpPortEntry OBJECT-TYPE + SYNTAX DscpPortEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry of dscpPortTable." + INDEX { ifIndex } + ::= { dscpPortTable 1 } + + DscpPortEntry ::= + SEQUENCE { + dscpStatusEnable INTEGER + } + + dscpStatusEnable OBJECT-TYPE + SYNTAX INTEGER { + enable(1), + disable(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The DSCP port status." + ::= { dscpPortEntry 1 } + +-------------------- +-- Vlan Isolation +-------------------- + + vlanIsolationTable OBJECT-TYPE + SYNTAX SEQUENCE OF VlanIsolationEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table contains configuration of isolated VLAN." + ::= { vlanIsolation 1 } + + vlanIsolationEntry OBJECT-TYPE + SYNTAX VlanIsolationEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry of vlanIsolationTable." + INDEX { dot1qVlanIndex } + ::= { vlanIsolationTable 1 } + + VlanIsolationEntry ::= + SEQUENCE { + vlanIsolationRowStatus INTEGER + } + + vlanIsolationRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Row status of the table used to create/delete an entry." + ::= { vlanIsolationEntry 1 } + +-------------------- +-- enet MTU +-------------------- + + enetMtuEntry OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Sets the MTU size for layer 2 frame, size from 1526 to 1532, default value is 1526." + ::= { enetMtu 1 } + +-------------------- +-- CFM +-------------------- + +-- cfmLoopbackPortTable + +-- cfmLoopbackPortTable OBJECT-TYPE +-- SYNTAX SEQUENCE OF CfmLoopbackPortEntry +-- MAX-ACCESS not-accessible +-- STATUS current +-- DESCRIPTION +-- "A table that contains CFM information." +-- ::= { cfm 1 } +-- +-- cfmLoopbackPortEntry OBJECT-TYPE +-- SYNTAX CfmLoopbackPortEntry +-- MAX-ACCESS not-accessible +-- STATUS current +-- DESCRIPTION +-- "An entry in cfmLoopbackPortTable." +-- INDEX { ifIndex } +-- ::= { cfmLoopbackPortTable 1 } +-- +-- CfmLoopbackPortEntry ::= SEQUENCE { +-- cfmLoopbackPortState INTEGER +-- } +-- +-- cfmLoopbackPortState OBJECT-TYPE +-- SYNTAX INTEGER { +-- enable(1), +-- disable(2) +-- } +-- MAX-ACCESS read-write +-- STATUS current +-- DESCRIPTION +-- "CFM loopback enable/disable on the port." +-- ::= { cfmLoopbackPortEntry 1 } +-- +-- cfmMIPTable +-- +-- cfmMIPTable OBJECT-TYPE +-- SYNTAX SEQUENCE OF CfmMIPEntry +-- MAX-ACCESS not-accessible +-- STATUS current +-- DESCRIPTION +-- "" +-- ::= { cfm 2 } +-- +-- cfmMIPEntry OBJECT-TYPE +-- SYNTAX CfmMIPEntry +-- MAX-ACCESS not-accessible +-- STATUS current +-- DESCRIPTION +-- "An entry in cfmMIPTable." +-- INDEX { cfmLevel, cfmVlanID, cfmPort } +-- ::= { cfmMIPTable 1 } +-- +-- CfmMIPEntry ::= +-- SEQUENCE { +-- cfmLevel INTEGER, +-- cfmVlanID INTEGER, +-- cfmPort INTEGER, +-- cfmMIPRowStatus RowStatus +-- } +-- +-- cfmLevel OBJECT-TYPE +-- SYNTAX INTEGER +-- MAX-ACCESS not-accessible +-- STATUS current +-- DESCRIPTION +-- "" +-- ::= { cfmMIPEntry 1 } +-- +-- cfmVlanID OBJECT-TYPE +-- SYNTAX INTEGER +-- MAX-ACCESS not-accessible +-- STATUS current +-- DESCRIPTION +-- "" +-- ::= { cfmMIPEntry 2 } +-- +-- cfmPort OBJECT-TYPE +-- SYNTAX INTEGER +-- MAX-ACCESS not-accessible +-- STATUS current +-- DESCRIPTION +-- "" +-- ::= { cfmMIPEntry 3 } +-- +-- cfmMIPRowStatus OBJECT-TYPE +-- SYNTAX RowStatus +-- MAX-ACCESS read-create +-- STATUS current +-- DESCRIPTION +-- "" +-- ::= { cfmMIPEntry 4 } +-- +-- cfmActionEnableStatus OBJECT-TYPE +-- SYNTAX INTEGER { +-- enable(1), +-- disable(2) +-- } +-- MAX-ACCESS read-write +-- STATUS current +-- DESCRIPTION +-- "CFM Action enable status for the CO device" +-- ::= { cfm 3 } + + +-------------------- +-- DHCP Relay +-------------------- + +-- dhcpRelayEnable OBJECT-TYPE +-- SYNTAX INTEGER { +-- auto(1), +-- both(2), +-- disable(3) +-- } +-- MAX-ACCESS read-write +-- STATUS current +-- DESCRIPTION +-- "Enable/disable DHCP relay Option82 function." +-- ::= { dhcp 1 } + + dhcpRelay82Table OBJECT-TYPE + SYNTAX SEQUENCE OF DhcpRelay82Entry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table that contains DHCP Relay configuration." + ::= { dhcp 2 } + + dhcpRelay82Entry OBJECT-TYPE + SYNTAX DhcpRelay82Entry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The entry of DHCP Relay table." + INDEX { dot1qVlanIndex } + ::= { dhcpRelay82Table 1 } + + DhcpRelay82Entry ::= + SEQUENCE { + dhcpRelay82PrimaryServer IpAddress, + dhcpRelay82SecondaryServer IpAddress, + dhcpRelay82ActiveServer INTEGER, + dhcpRelay82Enable INTEGER, + dhcpRelay82Info DisplayString, + dhcpRelay82RelayMode INTEGER, + dhcpRelay82Suboption2Enable INTEGER, + dhcpRelay82Suboption2Info DisplayString, + dhcpRelay82EntryEnable INTEGER, + dhcpRelay82EntryOptionMode INTEGER, + dhcpRelay82VlanIp IpAddress, + dhcpRelay82VlanMask INTEGER, + dhcpRelay82VlanGateway IpAddress, + dhcpRelay82ThirdServer IpAddress, + dhcpRelay82FourthServer IpAddress, + dhcpRelay82FifthServer IpAddress, + dhcpRelay82ServerVid INTEGER + } + + dhcpRelay82PrimaryServer OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The IP address of the DHCP Relay primary server." + ::= { dhcpRelay82Entry 1 } + + dhcpRelay82SecondaryServer OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The IP address of the DHCP Relay secondary server." + ::= { dhcpRelay82Entry 2 } + + dhcpRelay82ActiveServer OBJECT-TYPE + SYNTAX INTEGER { + primary(1), + secondary(2), + third(3), + fourth(4), + fifth(5) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The current active DHCP Relay server." + ::= { dhcpRelay82Entry 3 } + + dhcpRelay82Enable OBJECT-TYPE + SYNTAX INTEGER { + enable(1), + disable(2) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Enable/disable DHCP relay and Option82 function." + ::= { dhcpRelay82Entry 4 } + + dhcpRelay82Info OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..23)) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "User specific Option82 information." + ::= { dhcpRelay82Entry 5 } + + dhcpRelay82RelayMode OBJECT-TYPE + SYNTAX INTEGER { + auto(1), + all(2) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "DHCP relay mode." + ::= { dhcpRelay82Entry 6 } + + + dhcpRelay82Suboption2Enable OBJECT-TYPE + SYNTAX INTEGER { + enable(1), + disable(2) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Enable/disable Option 82 sub-option 2." + ::= { dhcpRelay82Entry 8 } + + dhcpRelay82Suboption2Info OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "User specified information for Option 82 sub-option 2." + ::= { dhcpRelay82Entry 9 } + + dhcpRelay82EntryEnable OBJECT-TYPE + SYNTAX INTEGER { + auto(1), + all(2), + disable(3) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Enable/disable DHCP Relay" + ::= { dhcpRelay82Entry 10 } + + dhcpRelay82EntryOptionMode OBJECT-TYPE + SYNTAX INTEGER { + private(1), + tr101(2) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Option82 format." + ::= { dhcpRelay82Entry 11 } + + dhcpRelay82VlanIp OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The IP address of the DHCP Relay interface for this VLAN." + ::= { dhcpRelay82Entry 12 } + + dhcpRelay82VlanMask OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The network mask of the DHCP Relay interface for this VLAN." + ::= { dhcpRelay82Entry 13 } + + dhcpRelay82VlanGateway OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The gateway of the DHCP Relay interface for this VLAN." + ::= { dhcpRelay82Entry 14 } + + dhcpRelay82ThirdServer OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The IP address of the DHCP Relay third server." + ::= { dhcpRelay82Entry 15 } + + dhcpRelay82FourthServer OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The IP address of the DHCP Relay fourth server." + ::= { dhcpRelay82Entry 16 } + + + dhcpRelay82FifthServer OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The IP address of the DHCP Relay fifth server." + ::= { dhcpRelay82Entry 17 } + + dhcpRelay82ServerVid OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The VID of the DHCP Relay server for this VLAN." + ::= { dhcpRelay82Entry 18 } + +-- dhcpRelayOption82Sub1Info OBJECT-TYPE +-- SYNTAX DisplayString (SIZE (0..23)) +-- MAX-ACCESS read-write +-- STATUS current +-- DESCRIPTION +-- "User specific Option82 subOption1 (Agent circuit ID) information." +-- ::= { dhcp 3 } + +-- maxNumOfDhcpRelay82Conf OBJECT-TYPE +-- SYNTAX INTEGER +-- MAX-ACCESS read-only +-- STATUS current +-- DESCRIPTION +-- "The maximum number of rows that can be created in dhcpRelay82Table." +-- ::= { dhcp 4 } + +-- dhcpRelayOption82Sub1Enable OBJECT-TYPE +-- SYNTAX INTEGER { +-- enable(1), +-- disable(2) +-- } +-- MAX-ACCESS read-write +-- STATUS current +-- DESCRIPTION +-- "Enable/disable DHCP relay Option82 subOption1 (Agent Circuit ID) function." +-- ::= { dhcp 5 } + +-- dhcpRelayOption82Sub2Info OBJECT-TYPE +-- SYNTAX DisplayString (SIZE (0..23)) +-- MAX-ACCESS read-write +-- STATUS current +-- DESCRIPTION +-- "User specific Option82 subOption2 (Agent Remote ID) information." +-- ::= { dhcp 6 } + +-- dhcpRelayOption82Sub2Enable OBJECT-TYPE +-- SYNTAX INTEGER { +-- enable(1), +-- disable(2) +-- } +-- MAX-ACCESS read-write +-- STATUS current +-- DESCRIPTION +-- "Enable/disable DHCP relay Option82 subOption2 (Agent Remote ID) function." +-- ::= { dhcp 7 } + +-- dhcpRelayTest + dhcpRelayTest OBJECT IDENTIFIER ::= { dhcp 8 } + + dhcpRelayTestVid OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Setting the VID of the test server." + ::= { dhcpRelayTest 1 } + + dhcpRelayTestIp OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Setting the IP of the test server." + ::= { dhcpRelayTest 2 } + + dhcpRelayTestOps OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Set the object to 1 to test DHCP server." + ::= { dhcpRelayTest 3 } + + dhcpRelayTestStatus OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Display testing server status." + ::= { dhcpRelayTest 4 } + +-- dhcpRelayArp + dhcpRelayArp OBJECT IDENTIFIER ::= { dhcp 9 } + + dhcpRelayArpShowTable OBJECT-TYPE + SYNTAX SEQUENCE OF DhcpRelayArpShowEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The table displays DHCP ARP." + ::= { dhcpRelayArp 1 } + + dhcpRelayArpShowEntry OBJECT-TYPE + SYNTAX DhcpRelayArpShowEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry of dhcpRelayArpShowTable." + INDEX { dhcpRelayArpShowVid, dhcpRelayArpShowIp } + ::= { dhcpRelayArpShowTable 1 } + + DhcpRelayArpShowEntry ::= + SEQUENCE { + dhcpRelayArpShowVid INTEGER, + dhcpRelayArpShowIp IpAddress, + dhcpRelayArpShowMac PhysAddress + } + + dhcpRelayArpShowVid OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Display the VID of the DHCP ARP entry." + ::= { dhcpRelayArpShowEntry 1 } + + dhcpRelayArpShowIp OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Display the IP of the DHCP ARP entry." + ::= { dhcpRelayArpShowEntry 2 } + + dhcpRelayArpShowMac OBJECT-TYPE + SYNTAX PhysAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Display the MAC of the DHCP ARP entry." + ::= { dhcpRelayArpShowEntry 3 } + + dhcpRelayArpFlushOps OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Set the object to 1 to start flushing." + ::= { dhcpRelayArp 2 } + +-------------------- +-- MAC Filter +-------------------- + +-- MAC Filter Port Table + + macFilterPortTable OBJECT-TYPE + SYNTAX SEQUENCE OF MacFilterPortEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table includes the status of mac filtering for each port." + ::= { macfilter 1 } + + macFilterPortEntry OBJECT-TYPE + SYNTAX MacFilterPortEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in macFilterPortTable." + INDEX { ifIndex } + ::= { macFilterPortTable 1 } + + MacFilterPortEntry ::= + SEQUENCE { + macFilterPortEnable INTEGER, + macFilterPortMacCount INTEGER, + macFilterPortFilterMode INTEGER + } + + macFilterPortEnable OBJECT-TYPE + SYNTAX INTEGER { + enableMacFilter(1), + enableMacCount(2), +-- enableOuiFilter(3), + disable(4), + enableMacFilterAndMacCount(5) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enable/disable MAC filtering for the port." + ::= { macFilterPortEntry 1 } + + macFilterPortMacCount OBJECT-TYPE + SYNTAX INTEGER (1..128) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The total number of MAC addresses allowed for the port." + ::= { macFilterPortEntry 2 } + + macFilterPortFilterMode OBJECT-TYPE + SYNTAX INTEGER { + accept(1), + deny(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The mac filter mode (accept or deny) for the port." + ::= { macFilterPortEntry 3 } + + maxNumOfMacFiltersInSystem OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The max number of mac filters supported in the system." + ::= { macfilter 2 } + + maxNumOfMacFiltersPerPort OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The max number of mac filters supported per port." + ::= { macfilter 3 } + + currNumOfMacFiltersInSystem OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The current number of mac filters in the system." + ::= { macfilter 4 } + +-- MAC Table + + macFilterTable OBJECT-TYPE + SYNTAX SEQUENCE OF MacFilterEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table that contains the mac filter addresses." + ::= { macfilter 5 } + + macFilterEntry OBJECT-TYPE + SYNTAX MacFilterEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The entry of macFilterTable." + INDEX { ifIndex, macFilterAddr } + ::= { macFilterTable 1 } + + MacFilterEntry ::= + SEQUENCE { + macFilterAddr PhysAddress, + macFilterRowStatus RowStatus + } + + macFilterAddr OBJECT-TYPE + SYNTAX PhysAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The mac address which can pass through or be rejected from the port." + ::= { macFilterEntry 1 } + + macFilterRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The row status of the entry." + ::= { macFilterEntry 2 } + +-- Batch Set for MAC Filter + + macfilterBatchSet OBJECT IDENTIFIER ::= { macfilter 6 } + + macfilterTarget OBJECT-TYPE + SYNTAX OCTET STRING + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This managed object is used for identify the target on which + the port configuration should be performed. The target is encoded as: + Byte 1: 0, Reserved(chassis) + Byte 2~3: 0, Reserved(slot) + Byte 4: 0, reserved + Byte 5~11:each octet specifies a set of eight ports, with the first + octet specifying ports 1 through 8, etc." + ::= { macfilterBatchSet 1 } + + macfilterOps OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The corresponding bit is set to 1 to start the operation. + The various bit positions are: + BIT 1: enable mac filter + BIT 2: enable mac count filter + BIT 3: disable mac filter + BIT 4: set mac count + BIT 5: disable mac count filter." + ::= { macfilterBatchSet 2 } + + macFilterMacCountForBatchSet OBJECT-TYPE + SYNTAX INTEGER (1..128) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The total number of MAC addresses allowed for a port." + ::= { macfilterBatchSet 3 } + + +-- OUI Filter Table +-- obsoleted since V3.0 at 2009/11/26 by maverick +-- Not used for R3.x and above. + ouiFilterTableOld OBJECT-TYPE + SYNTAX SEQUENCE OF OuiFilterEntryOld + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table that contains the OUI filter addresses." + ::= { macfilter 7 } + + ouiFilterEntryOld OBJECT-TYPE + SYNTAX OuiFilterEntryOld + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The entry of ouiFilterTableOld." + INDEX { ifIndex, ouiFilterAddrOld } + ::= { ouiFilterTableOld 1 } + + OuiFilterEntryOld ::= + SEQUENCE { + ouiFilterAddrOld OCTET STRING, + ouiFilterRowStatusOld RowStatus + } + + ouiFilterAddrOld OBJECT-TYPE + SYNTAX OCTET STRING + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The first three bytes of the mac address which can pass through or be rejected from the port." + ::= { ouiFilterEntryOld 1 } + + ouiFilterRowStatusOld OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The row status of the entry." + ::= { ouiFilterEntryOld 2 } + + maxNumOfOuiFiltersPerPort OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The max number of OUI filters supported per port." + ::= { macfilter 8 } + + + ouiFilterPortTable OBJECT-TYPE + SYNTAX SEQUENCE OF OuiFilterPortEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table includes the status of oui filtering for each port." + ::= { macfilter 9 } + + ouiFilterPortEntry OBJECT-TYPE + SYNTAX OuiFilterPortEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in macFilterPortTable." + INDEX { ifIndex } + ::= { ouiFilterPortTable 1 } + + OuiFilterPortEntry ::= + SEQUENCE { + ouiFilterPortEnable INTEGER, + ouiFilterPortFilterMode INTEGER + } + + + ouiFilterPortEnable OBJECT-TYPE + SYNTAX INTEGER { + enableOuiFilter(1), + disable(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enable/disable oui filtering for the port." + ::= { ouiFilterPortEntry 1 } + + + + ouiFilterPortFilterMode OBJECT-TYPE + SYNTAX INTEGER { + accept(1), + deny(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The oui filter mode (accept or deny) for the port." + ::= { ouiFilterPortEntry 2 } + +-- new OUI Filter VLAN + + maxNumOfOuiFiltersInSystem OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The max number of OUI filters supported in system." + ::= { macfilter 10 } + + maxNumOfOuiFiltersPerVlan OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The max number of OUI filters supported per vlan." + ::= { macfilter 11 } + + ouiFilterTable OBJECT-TYPE + SYNTAX SEQUENCE OF OuiFilterEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table that contains the OUI filter addresses." + ::= { macfilter 12 } + + ouiFilterEntry OBJECT-TYPE + SYNTAX OuiFilterEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The entry of ouiFilterTable." + INDEX { dot1qVlanIndex, ouiFilterAddr } + ::= { ouiFilterTable 1 } + + OuiFilterEntry ::= + SEQUENCE { + ouiFilterAddr OCTET STRING, + ouiFilterRowStatus RowStatus + } + + ouiFilterAddr OBJECT-TYPE + SYNTAX OCTET STRING + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The first three bytes of the mac address which can pass through or be rejected from the vlan." + ::= { ouiFilterEntry 1 } + + ouiFilterRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The row status of the entry." + ::= { ouiFilterEntry 2 } + + + ouiFilterVlanTable OBJECT-TYPE + SYNTAX SEQUENCE OF OuiFilterVlanEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table includes the status of oui filtering for each configured VLAN." + ::= { macfilter 13 } + + ouiFilterVlanEntry OBJECT-TYPE + SYNTAX OuiFilterVlanEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in ouiFilterVlanTable." + INDEX { dot1qVlanIndex } + ::= { ouiFilterVlanTable 1 } + + OuiFilterVlanEntry ::= + SEQUENCE { + ouiFilterVlanEnable INTEGER, + ouiFilterVlanFilterMode INTEGER + } + + + ouiFilterVlanEnable OBJECT-TYPE + SYNTAX INTEGER { + enableOuiFilter(1), + disable(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enable/disable oui filtering for the VLAN." + ::= { ouiFilterVlanEntry 1 } + + + + ouiFilterVlanFilterMode OBJECT-TYPE + SYNTAX INTEGER { + accept(1), + deny(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The oui filter mode (accept or deny) for the VLAN." + ::= { ouiFilterVlanEntry 2 } + + +-------------------- +-- DHCP Snoop +-------------------- + +-- dhcpSnoopPortTable + + dhcpSnoopPortTable OBJECT-TYPE + SYNTAX SEQUENCE OF DhcpSnoopPortEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table includes DHCP snooping enable/disable for each port." + ::= { dhcpSnoop 1 } + + dhcpSnoopPortEntry OBJECT-TYPE + SYNTAX DhcpSnoopPortEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry of dhcpSnoopPortTable." + INDEX { ifIndex } + ::= { dhcpSnoopPortTable 1 } + + DhcpSnoopPortEntry ::= + SEQUENCE { + dhcpSnoopEnable INTEGER, + dhcpSnoopMaxcnt INTEGER, + dhcpSnoopSmacverifyEnable INTEGER + } + + dhcpSnoopEnable OBJECT-TYPE + SYNTAX INTEGER { + enable(1), + disable(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enable/disable DHCP snooping for a port." + ::= { dhcpSnoopPortEntry 1 } + + dhcpSnoopMaxcnt OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Set the max entries of the DHCP ARP table." + ::= { dhcpSnoopPortEntry 2 } + + dhcpSnoopSmacverifyEnable OBJECT-TYPE + SYNTAX INTEGER { + enable(1), + disable(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enable/disable DHCP source MAC verify for a port." + ::= { dhcpSnoopPortEntry 3 } + + +-- dhcpSnoopOperation + + dhcpSnoopTarget OBJECT-TYPE + SYNTAX OCTET STRING + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This managed object is used for identify the target on which + the operation should be performed. The target is encoded as: + Byte 1: the octet specifies a set of eight chassis, chassis 0 through 7 + Byte 2~3: each octet specifies a set of eight slots, with the + first octet specifying slots 1 through 8 and the second + octet specifying slots 9 through 16. + Byte 4: reserved + Byte 5~11:each octet specifies a set of eight ports, with the first + octet specifying ports 1 through 8, etc." + ::= { dhcpSnoop 2 } + + dhcpSnoopOps OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The corresponding bit is set to 1 to start the operation. + The various bit positions are: + BIT 1: DHCP snooping table flush." + ::= { dhcpSnoop 3 } + +-- dhcpStaticTable + + dhcpStaticTable OBJECT-TYPE + SYNTAX SEQUENCE OF DhcpStaticEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table defines DHCP static IP addresses." + ::= { dhcpSnoop 4 } + + dhcpStaticEntry OBJECT-TYPE + SYNTAX DhcpStaticEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry of dhcpStaticTable." + INDEX { ifIndex, dhcpStaticIpAddr } + ::= { dhcpStaticTable 1 } + + DhcpStaticEntry ::= + SEQUENCE { + dhcpStaticIpAddr IpAddress, + dhcpStaticRowStatus RowStatus + } + + dhcpStaticIpAddr OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The IP address which can pass through the port." + ::= { dhcpStaticEntry 1 } + + dhcpStaticRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Row status of the table entry." + ::= { dhcpStaticEntry 2 } + + maxNumOfDhcpStaticIp OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The maximum number of DHCP static IP addresses which can be created for a port." + ::= { dhcpSnoop 5 } + + dhcpSnoopMaxcntMode OBJECT-TYPE + SYNTAX INTEGER { + replace(1), + drop(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "When DHCP snooping table is full, new DHCP lease will replace first one in option 0 or will be dropped in option 1." + ::= { dhcpSnoop 6 } + +-------------------- +-- ACL Rule +-------------------- + +-- aclSetTable + + aclSetTable OBJECT-TYPE + SYNTAX SEQUENCE OF AclSetEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "aclsetTable." + ::= { acl 1 } + + aclSetEntry OBJECT-TYPE + SYNTAX AclSetEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry of aclSetTable." + INDEX { ifIndex, aclSetVpi, aclSetVci, aclSetProfileName } + ::= { aclSetTable 1 } + + AclSetEntry ::= + SEQUENCE { + aclSetVpi INTEGER, + aclSetVci INTEGER, + aclSetProfileName DisplayString, + aclSetRowStatus RowStatus + } + + aclSetVpi OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "VPI value" + ::= { aclSetEntry 1 } + + aclSetVci OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "VCI value" + ::= { aclSetEntry 2 } + + aclSetProfileName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "ACL Profile name" + ::= { aclSetEntry 3 } + + aclSetRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "RowStatus of aclSetEntry" + ::= { aclSetEntry 4 } + +-- aclProfileTable + + aclProfileTable OBJECT-TYPE + SYNTAX SEQUENCE OF AclProfileEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "aclProfileTable." + ::= { acl 2 } + + aclProfileEntry OBJECT-TYPE + SYNTAX AclProfileEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry of aclProfileTable." + INDEX { aclProfileRuleName } + ::= { aclProfileTable 1 } + + AclProfileEntry ::= + SEQUENCE { + aclProfileRuleName DisplayString, + aclProfileRuleNumber INTEGER, + aclProfileActionNumber INTEGER, + aclProfileRuleParamMask INTEGER, + aclProfileRuleEtype INTEGER, + aclProfileRuleVid INTEGER, + aclProfileRuleSmac PhysAddress, + aclProfileRuleDmac PhysAddress, + aclProfileRulePriority INTEGER, + aclProfileRuleProtocol INTEGER, + aclProfileRuleSrcIP IpAddress, + aclProfileRuleSrcIPMask INTEGER, + aclProfileRuleDestIP IpAddress, + aclProfileRuleDestIPMask INTEGER, + aclProfileRuleStartTos INTEGER, + aclProfileRuleEndTos INTEGER, + aclProfileRuleSrcStartPort INTEGER, + aclProfileRuleSrcEndPort INTEGER, + aclProfileRuleDestStartPort INTEGER, + aclProfileRuleDestEndPort INTEGER, + aclProfileActionRate INTEGER, + aclProfileActionrvlan INTEGER, + aclProfileActionrpri INTEGER, + aclProfileRowStatus RowStatus + } + + aclProfileRuleName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Profile rule name" + ::= { aclProfileEntry 1 } + + aclProfileRuleNumber OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The managed object is for acl profile rule configuration. + etype <etype> vlan <vid> (1), + etype <etype> smac <mac> (2), + etype <etype> dmac <mac> (3), + vlan <vid> smac <mac> (4), + vlan <vid> dmac <mac> (5), + smac <mac> dmac <mac> (6), + vlan <vid> priority <priority> (7), + etype <etype> (8), + vlan <vid> (9), + smac <mac> (10), + dmac <mac> (11), + priority <priority> (12), + protocol <protocol> (13), + {srcip <ip>/<mask>{|dstip <ip>/<mask>{|tos <stos> <etos>{|srcport <sport> <eport> {|dstport <sport> <eport>}}}}} (14) " + ::= { aclProfileEntry 2 } + + aclProfileActionNumber OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Profile action number. + Bit 1: rate + Bit 2: rvlan + Bit 3: rpri + Bit 4: deny + Bit 1, Bit 2 & Bit 3 can multiple selection." + ::= { aclProfileEntry 3 } + + aclProfileRuleParamMask OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Profile rule parameter mask. + BIT 1: srcip <ip>/<mask> + BIT 2: dstip <ip>/<mask> + BIT 3: tos <stos> <etos> + BIT 4: srcport <sport> <eport> + BIT 5: dstport <sport> <eport>" + ::= { aclProfileEntry 4 } + + aclProfileRuleEtype OBJECT-TYPE + SYNTAX INTEGER (0..65535) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Profile rule etype" + ::= { aclProfileEntry 5 } + + aclProfileRuleVid OBJECT-TYPE + SYNTAX INTEGER (1..4094) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Profile rule vid" + ::= { aclProfileEntry 6 } + + aclProfileRuleSmac OBJECT-TYPE + SYNTAX PhysAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Profile rule source MAC" + ::= { aclProfileEntry 7 } + + aclProfileRuleDmac OBJECT-TYPE + SYNTAX PhysAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Profile rule destination MAC" + ::= { aclProfileEntry 8 } + + aclProfileRulePriority OBJECT-TYPE + SYNTAX INTEGER (0..7) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Profile rule priority" + ::= { aclProfileEntry 9 } + + aclProfileRuleProtocol OBJECT-TYPE + SYNTAX INTEGER (0..255) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Profile rule protocol. + icmp(1),igmp(2),ip(4),tcp(6), + udp(17),gre(47),ospf(89), + other ptype" + ::= { aclProfileEntry 10 } + + aclProfileRuleSrcIP OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Profile rule source IP" + ::= { aclProfileEntry 11 } + + aclProfileRuleSrcIPMask OBJECT-TYPE + SYNTAX INTEGER (0..32) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The subnet mask of source IP mask" + ::= { aclProfileEntry 12 } + + aclProfileRuleDestIP OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Profile rule source IP" + ::= { aclProfileEntry 13 } + + aclProfileRuleDestIPMask OBJECT-TYPE + SYNTAX INTEGER (0..32) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The subnet mask of dest IP mask" + ::= { aclProfileEntry 14 } + + aclProfileRuleStartTos OBJECT-TYPE + SYNTAX INTEGER (0..255) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Profile rule start type of service" + ::= { aclProfileEntry 15 } + + aclProfileRuleEndTos OBJECT-TYPE + SYNTAX INTEGER (0..255) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Profile rule end type of service" + ::= { aclProfileEntry 16 } + + aclProfileRuleSrcStartPort OBJECT-TYPE + SYNTAX INTEGER (0..65535) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Profile rule source start port" + ::= { aclProfileEntry 17 } + + aclProfileRuleSrcEndPort OBJECT-TYPE + SYNTAX INTEGER (0..65535) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Profile rule source end port" + ::= { aclProfileEntry 18 } + + aclProfileRuleDestStartPort OBJECT-TYPE + SYNTAX INTEGER (0..65535) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Profile rule destination start port" + ::= { aclProfileEntry 19 } + + aclProfileRuleDestEndPort OBJECT-TYPE + SYNTAX INTEGER (0..65535) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Profile rule destination end port" + ::= { aclProfileEntry 20 } + + aclProfileActionRate OBJECT-TYPE + SYNTAX INTEGER (1..65535) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Profile action to replace to this rate" + ::= { aclProfileEntry 21 } + + aclProfileActionrvlan OBJECT-TYPE + SYNTAX INTEGER (1..4094) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Profile action to replace to this vlan" + ::= { aclProfileEntry 22 } + + aclProfileActionrpri OBJECT-TYPE + SYNTAX INTEGER (0..7) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Profile action to replace to this priority" + ::= { aclProfileEntry 23 } + + aclProfileRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The row status of the entry." + ::= { aclProfileEntry 24 } + +-------------------- +-- PPPoE Agent +-------------------- + +-- pppoeAgentTable + + pppoeAgentTable OBJECT-TYPE + SYNTAX SEQUENCE OF PppoeAgentEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table that contains PPPoE DHCP Relay configuration." + ::= { pppoeAgent 1 } + + pppoeAgentEntry OBJECT-TYPE + SYNTAX PppoeAgentEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry of pppoeAgentTable." + INDEX { dot1qVlanIndex } + ::= { pppoeAgentTable 1 } + + PppoeAgentEntry ::= + SEQUENCE { + pppoeAgentEnable INTEGER, + pppoeAgentInfo DisplayString, + pppoeAgentRowStatus RowStatus, + pppoeAgentOptionMode INTEGER + } + + pppoeAgentEnable OBJECT-TYPE + SYNTAX INTEGER { + enable(1), + disable(2) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Enable/disable DHCP relay and Option82 function." + ::= { pppoeAgentEntry 1 } + + pppoeAgentInfo OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..23)) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "User specific Option82 information." + ::= { pppoeAgentEntry 2 } + + pppoeAgentRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Row status of the table entry." + ::= { pppoeAgentEntry 3 } + + pppoeAgentOptionMode OBJECT-TYPE + SYNTAX INTEGER { + private(1), + tr101(2) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Option82 format." + ::= { pppoeAgentEntry 4 } + + maxNumOfPppoeDhcpRelay82Conf OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The maximum number of rows that can be created in pppoeAgentTable." + ::= { pppoeAgent 2 } + +---------------------------------------- +-- macff +---------------------------------------- + macFfTable OBJECT-TYPE + SYNTAX SEQUENCE OF MacFfEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table that contains MAC Force Forwarding configuration." + ::= { macff 1 } + + macFfEntry OBJECT-TYPE + SYNTAX MacFfEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry of macFfTable." + INDEX { macFfIndex } + ::= { macFfTable 1 } + + MacFfEntry ::= + SEQUENCE { + macFfIndex INTEGER, + macFfVid INTEGER, + macFfArIP IpAddress, +-- macFfArMask INTEGER, + macFfSrcIP IpAddress, + macFfSrcMask INTEGER, + macFfRowStatus RowStatus + } + + macFfIndex OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Index of the MACFF." + ::= { macFfEntry 1 } + + macFfVid OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The VLAN-ID refering to this AR/AS." + ::= { macFfEntry 2 } + + + macFfArIP OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "IP of this AR/AS" + ::= { macFfEntry 3 } + + macFfSrcIP OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The source IP address of the MACFF." + ::= { macFfEntry 4 } + + macFfSrcMask OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The subnet mask of source IP mask." + ::= { macFfEntry 5 } + + + macFfRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The row status of the MacFfEntry entry." + ::= { macFfEntry 6 } + + + macFfArpFlush OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Set the object to 1 to flush mac table." + ::= { macff 3 } + + maxNumOfMacFfVlanInSystem OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The max number of macff Vlans supported in the system." + ::= { macff 4 } + + macFfVlanTable OBJECT-TYPE + SYNTAX SEQUENCE OF MacFfVlanEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table that contains MAC Force Forwarding Vlan configuration." + ::= { macff 5 } + + macFfVlanEntry OBJECT-TYPE + SYNTAX MacFfVlanEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry of macFfVlanTable." + INDEX { dot1qVlanIndex } + ::= { macFfVlanTable 1 } + + MacFfVlanEntry ::= + SEQUENCE { + macFfVlanRowstatus INTEGER, + macFfVlanUnknownUnicast INTEGER + } + + macFfVlanRowstatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Row status of the table used to create/delete an entry." + ::= { macFfVlanEntry 1 } + + macFfVlanUnknownUnicast OBJECT-TYPE + SYNTAX INTEGER { + flood(1), + drop(2) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Setting downstream unknown uni-cast packet on macff vlan to flooding or dropping." + ::= { macFfVlanEntry 2 } + + macFfStaticIPTable OBJECT-TYPE + SYNTAX SEQUENCE OF MacFfStaticIPEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + " " + ::= { macff 6 } + + macFfStaticIPEntry OBJECT-TYPE + SYNTAX MacFfStaticIPEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry of macFfTable." + INDEX { macFfStaticIPPort, macFfStaticIPVid, macFfstaticIP , macFfStaticIPMask} + ::= { macFfStaticIPTable 1 } + + MacFfStaticIPEntry ::= + SEQUENCE { + macFfStaticIPPort INTEGER, + macFfStaticIPVid INTEGER, + macFfstaticIP IpAddress, + macFfStaticIPMask INTEGER, + macFfStaticIPRowStatus RowStatus + } + + macFfStaticIPPort OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " The port number, 1 ~ 48." + ::= { macFfStaticIPEntry 1 } + + macFfStaticIPVid OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + + STATUS current + DESCRIPTION + "VLAN ID of the IP range, 1 ~ 4094, the vid should be enable the MACFF function first." + ::= { macFfStaticIPEntry 2 } + + + macFfstaticIP OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + + STATUS current + DESCRIPTION + "The specified IP range." + ::= { macFfStaticIPEntry 3 } + + macFfStaticIPMask OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + + STATUS current + DESCRIPTION + "Mask_bits is 24 .. 32." + ::= { macFfStaticIPEntry 4 } + + + macFfStaticIPRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The row status used to configure the table entry." + ::= { macFfStaticIPEntry 5 } + +---------------------------------------- +-- sys +---------------------------------------- + accessCtrl OBJECT IDENTIFIER ::= { sys 5 } + extAlarm OBJECT IDENTIFIER ::= { sys 8 } + user OBJECT IDENTIFIER ::= { sys 9 } + usbCastCtrl OBJECT IDENTIFIER ::= { sys 10} + dsbCastCtrl OBJECT IDENTIFIER ::= { sys 11} + + + + stdioTimeout OBJECT-TYPE + SYNTAX INTEGER (0..300) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Set the CLI/TELNET/WEB Session timeout, 0, or 1~300 minutes, 0 => disable." + ::= { sys 12 } + + isConfigChanged OBJECT-TYPE + SYNTAX INTEGER { + yes(1), + no(2) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "If system configuration has been changed." + ::= { sys 13 } + + fwUpgrade OBJECT IDENTIFIER ::= {sys 14} + delayedReboot OBJECT IDENTIFIER ::= {sys 15} +-------------------- +-- Access Control +-------------------- +-- Secured Client Table + + securedClientTable OBJECT-TYPE + SYNTAX SEQUENCE OF SecuredClientEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table that contains information about secured clients." + ::= { accessCtrl 2 } + + securedClientEntry OBJECT-TYPE + SYNTAX SecuredClientEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of secured client entry." + INDEX { securedClientIndex } + ::= { securedClientTable 1 } + + SecuredClientEntry ::= + SEQUENCE { + securedClientIndex INTEGER, + securedClientStartIp IpAddress, + securedClientEndIp IpAddress, + securedClientService INTEGER, + securedClientEnable INTEGER + } + + securedClientIndex OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The index of the entry." + ::= { securedClientEntry 1 } + + securedClientStartIp OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The starting IP address of the secured client set." + ::= { securedClientEntry 2 } + + securedClientEndIp OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The ending IP address of the secured client set." + ::= { securedClientEntry 3 } + + securedClientService OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Each bit corresponds to a service. The bit is set to 1 if the + service is enabled, and set to 0 if the service is disabled. + The various bit positions are: + BIT 1: telnet + BIT 2: ftp + BIT 3: web + BIT 4: icmp + BIT 5: not support + BIT 6: snmp." + ::= { securedClientEntry 4 } + + securedClientEnable OBJECT-TYPE + SYNTAX INTEGER { + enable(1), + disable(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enable/disable the entry." + ::= { securedClientEntry 5 } + + +-------------------- +-- extAlarm +-------------------- + + extAlarmTable OBJECT-TYPE + SYNTAX SEQUENCE OF ExtAlarmEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table that contains external alarm information." + ::= { extAlarm 1 } + + extAlarmEntry OBJECT-TYPE + SYNTAX ExtAlarmEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The entry of external alarm table." + INDEX { extAlarmIndex } + ::= { extAlarmTable 1 } + + ExtAlarmEntry ::= + SEQUENCE { + extAlarmIndex INTEGER, + extAlarmname OCTET STRING, + extAlarmstatus OCTET STRING, + extAlarmTriggeredMode INTEGER + } + + extAlarmIndex OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The index of the entry." + ::= { extAlarmEntry 1 } + + extAlarmname OBJECT-TYPE + SYNTAX DisplayString (SIZE (1..31)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The external alarm name." + ::= { extAlarmEntry 2 } + + extAlarmstatus OBJECT-TYPE + SYNTAX DisplayString (SIZE (1..31)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Dispaly 'Normal' or 'Alarm' string" + ::= { extAlarmEntry 3 } + + extAlarmTriggeredMode OBJECT-TYPE + SYNTAX INTEGER { + closeAlarm(1), + openAlarm(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The external alarm triggered mode." + ::= { extAlarmEntry 4 } + +-------------------- +-- User Management +-------------------- + + userAuthMode OBJECT-TYPE + SYNTAX INTEGER { + local(1), + radius(2), + localThenRadius(3) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "User authentication procsssing mode." + ::= { user 1 } + + userAuthServerIp OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The IP address of the authentication server." + ::= { user 2 } + + userAuthServerPort OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The port of the authentication server." + ::= { user 3 } + + userAuthServerSecret OBJECT-TYPE + SYNTAX OCTET STRING + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The secret between the authentication server and the NE for authentication process." + ::= { user 4 } + +-- userTable + + userTable OBJECT-TYPE + SYNTAX SEQUENCE OF UserEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table that contains user information." + ::= { user 5 } + + userEntry OBJECT-TYPE + SYNTAX UserEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry of userTable." + INDEX { userName } + ::= { userTable 1 } + + UserEntry ::= + SEQUENCE { + userName DisplayString, + userPassword DisplayString, + userPriviledge INTEGER, + userRowStatus RowStatus + } + + userName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The user name." + ::= { userEntry 1 } + + userPassword OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The user password." + ::= { userEntry 2 } + + userPriviledge OBJECT-TYPE + SYNTAX INTEGER { + high(1), + middle(2), + low(3) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The user priviledge to decide what operation the user can and cannot do." + ::= { userEntry 3 } + + userRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The row status used to create or delete a user." + ::= { userEntry 4 } + + userAuthDefaultPriviledge OBJECT-TYPE + SYNTAX INTEGER { + high(1), + middle(2), + low(3), + deny(4) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The user default priviledge to be assigned when radius authentication succeds + but no user priviledge information(radius service-type) is provided." + ::= { user 6 } + +-------------------- +-- Upstream Broadcast +-------------------- + + usBcastCtrlEnable OBJECT-TYPE + SYNTAX INTEGER { + enable(1), + disable(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enable/disable upstream broadcast control." + ::= { usbCastCtrl 1 } + + usBcastCtrlRate OBJECT-TYPE + SYNTAX INTEGER + UNITS "Kbps" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "32~49984 in step of 32kbps" + ::= { usbCastCtrl 2 } + +-------------------- +-- Downstream Broadcast +-------------------- + + dsBcastCtrlEnable OBJECT-TYPE + SYNTAX INTEGER { + enable(1), + disable(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enable/disable downstream broadcast control." + ::= { dsbCastCtrl 1 } + + dsBcastCtrlRate OBJECT-TYPE + SYNTAX INTEGER + UNITS "Kbps" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "32~1000000 in step of 32 kbps" + ::= { dsbCastCtrl 2 } + + +-------------------- +-- fwUpgrade +-------------------- + + fwUpgradeVersion OBJECT-TYPE + SYNTAX OCTET STRING + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Configure the target firmware version that will be upgraded." + ::= { fwUpgrade 1 } + + fwUpgradeCheck OBJECT-TYPE + SYNTAX INTEGER { + enable(1), + disable(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enable/disable firmware upgrade version checking feature." + ::= { fwUpgrade 2 } + + fwUpgradeStatus OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Display current firmware upgrade status." + ::= { fwUpgrade 3 } + +-------------------- +-- delayedReboot +-------------------- + delayedRebootTimer OBJECT-TYPE + SYNTAX INTEGER + UNITS "sec" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "5~1800 secs, 0: reboot immediately." + ::= { delayedReboot 1 } + + delayedRebootRemainingTime OBJECT-TYPE + SYNTAX INTEGER + UNITS "sec" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Display the remaining time of scheduled reboot." + ::= { delayedReboot 2 } + + delayedRebootCancel OBJECT-TYPE + SYNTAX INTEGER { + cancel(1) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "cancel the scheduled reboot." + ::= { delayedReboot 3 } + + + +---------------------------------------- +-- statistics +---------------------------------------- + + dhcpStats OBJECT IDENTIFIER ::= { statistics 11 } + paepvcStats OBJECT IDENTIFIER ::= { statistics 12 } + macStats OBJECT IDENTIFIER ::= { statistics 13 } + ipbpvcStats OBJECT IDENTIFIER ::= { statistics 14 } -- obsoleted since R3.0 at 2009/11/26 by maverick + macffStats OBJECT IDENTIFIER ::= { statistics 16 } + enetStats OBJECT IDENTIFIER ::= { statistics 17 } + adslStats OBJECT IDENTIFIER ::= { statistics 18 } +-------------------- +-- IGMP +-------------------- + + igmpQueryCntTotal OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of IGMP query messages received." + ::= { statistics 1 } + + igmpReportCntTotal OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of IGMP report messages received." + ::= { statistics 2 } + + igmpLeaveCntTotal OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of IGMP leave messages received." + ::= { statistics 3 } + + igmpNumOfActiveGroups OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of IGMP learned groups." + ::= { statistics 4 } + +-- igmpGroupTable + + igmpGroupTable OBJECT-TYPE + SYNTAX SEQUENCE OF IgmpGroupEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table includes igmp group information." + ::= { statistics 5 } + + igmpGroupEntry OBJECT-TYPE + SYNTAX IgmpGroupEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in igmpGroupTable." + INDEX { igmpGroupIp } + ::= { igmpGroupTable 1 } + + IgmpGroupEntry ::= + SEQUENCE { + igmpGroupIp IpAddress, + igmpGroupvid INTEGER, + igmpGroupnumberOfMembers INTEGER, + igmpGroupMemberPorts PortList + + } + + igmpGroupIp OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "igmp group IP" + ::= { igmpGroupEntry 1 } + + igmpGroupvid OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "vlan id" + ::= { igmpGroupEntry 2 } + + igmpGroupnumberOfMembers OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "number Of Members" + + ::= { igmpGroupEntry 3 } + + igmpGroupMemberPorts OBJECT-TYPE + SYNTAX PortList + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Group Member Ports" + + ::= { igmpGroupEntry 4 } + +-- igmpGroupPortTable + + igmpGroupPortTable OBJECT-TYPE + SYNTAX SEQUENCE OF IgmpGroupPortEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table includes igmp Group port information." + ::= { statistics 6 } + + igmpGroupPortEntry OBJECT-TYPE + SYNTAX IgmpGroupPortEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in igmpGroupPortTable." + INDEX { ifIndex , igmpGroupPortIp , igmpGroupPortvid} + ::= { igmpGroupPortTable 1 } + + IgmpGroupPortEntry ::= + SEQUENCE { + igmpGroupPortIp IpAddress, + igmpGroupPortvid INTEGER + } + + igmpGroupPortIp OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Igmp Group IP" + ::= { igmpGroupPortEntry 1 } + + igmpGroupPortvid OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Igmp Group vid" + ::= { igmpGroupPortEntry 2 } + +-- igmpGroupV2Table + + igmpGroupV2Table OBJECT-TYPE + SYNTAX SEQUENCE OF IgmpGroupV2Entry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table that displays IGMP learned group member information." + ::= { statistics 7 } + + igmpGroupV2Entry OBJECT-TYPE + SYNTAX IgmpGroupV2Entry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry of igmpGroupV2Table." + INDEX { igmpGroupV2Vid, igmpGroupV2Ip } + ::= { igmpGroupV2Table 1 } + + IgmpGroupV2Entry ::= + SEQUENCE { + igmpGroupV2Vid VlanIndex, + igmpGroupV2Ip IpAddress, + igmpGroupV2NumOfMembers INTEGER, + igmpGroupV2MemberPorts PortList + } + + igmpGroupV2Vid OBJECT-TYPE + SYNTAX VlanIndex + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The IGMP group VLAN ID." + ::= { igmpGroupV2Entry 1 } + + igmpGroupV2Ip OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The multicast IP address." + ::= { igmpGroupV2Entry 2 } + + igmpGroupV2NumOfMembers OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of member ports in the group." + ::= { igmpGroupV2Entry 3 } + + igmpGroupV2MemberPorts OBJECT-TYPE + SYNTAX PortList + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The member port list of the group." + ::= { igmpGroupV2Entry 4 } + +-- igmpGroupPortV2Table + + igmpGroupPortV2Table OBJECT-TYPE + SYNTAX SEQUENCE OF IgmpGroupPortV2Entry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table that displays IGMP joined groups in this port." + ::= { statistics 8 } + + igmpGroupPortV2Entry OBJECT-TYPE + SYNTAX IgmpGroupPortV2Entry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry of igmpGroupPortV2Table." + INDEX { ifIndex, igmpGroupPortV2Vid, igmpGroupPortV2Ip, igmpGroupPortV2SourceIp } + ::= { igmpGroupPortV2Table 1 } + + IgmpGroupPortV2Entry ::= + SEQUENCE { + igmpGroupPortV2Vid VlanIndex, + igmpGroupPortV2Ip IpAddress, + igmpGroupPortV2SourceIp IpAddress + } + + igmpGroupPortV2Vid OBJECT-TYPE + SYNTAX VlanIndex + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The IGMP group VLAN ID." + ::= { igmpGroupPortV2Entry 1 } + + igmpGroupPortV2Ip OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The multicast IP address." + ::= { igmpGroupPortV2Entry 2 } + + igmpGroupPortV2SourceIp OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The source IP address that joins the IGMP group." + ::= { igmpGroupPortV2Entry 3 } + +-- igmpPortCtrlPduTable + + igmpPortCtrlPduTable OBJECT-TYPE + SYNTAX SEQUENCE OF IgmpPortCtrlPduEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table that displays IGMP related counter values in this port." + ::= { statistics 9 } + + igmpPortCtrlPduEntry OBJECT-TYPE + SYNTAX IgmpPortCtrlPduEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry of igmpPortCtrlPduTable." + INDEX { ifIndex } + ::= { igmpPortCtrlPduTable 1 } + + IgmpPortCtrlPduEntry ::= + SEQUENCE { + igmpPortCtrlPduQueryCnt Counter32, + igmpPortCtrlPduReportCnt Counter32, + igmpPortCtrlPduLeaveCnt Counter32, + igmpPortNumOfActiveGroups INTEGER, + igmpPortCtrlAuditLeaveCnt Counter32 + } + + igmpPortCtrlPduQueryCnt OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of IGMP query messages received in this port." + ::= { igmpPortCtrlPduEntry 1 } + + igmpPortCtrlPduReportCnt OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of IGMP report messages received in this port." + ::= { igmpPortCtrlPduEntry 2 } + + igmpPortCtrlPduLeaveCnt OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of IGMP leave messages received in this port." + ::= { igmpPortCtrlPduEntry 3 } + + igmpPortNumOfActiveGroups OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of active IGMP groups in this port." + ::= { igmpPortCtrlPduEntry 4 } + + igmpPortCtrlAuditLeaveCnt OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of groups left by audit query." + ::= { igmpPortCtrlPduEntry 5 } +-------------------- +-- DHCP +-------------------- + +-- dhcpSnoopIpTable + + dhcpSnoopIpTable OBJECT-TYPE + SYNTAX SEQUENCE OF DhcpSnoopIpEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table shows the IP addresses and netmasks offered by the DHCP server." + ::= { dhcpStats 1 } + + dhcpSnoopIpEntry OBJECT-TYPE + SYNTAX DhcpSnoopIpEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry of dhcpSnoopIpTable." + INDEX { ifIndex, dhcpSnoopIp } + ::= { dhcpSnoopIpTable 1 } + + DhcpSnoopIpEntry ::= + SEQUENCE { + dhcpSnoopIp IpAddress, + dhcpSnoopMac PhysAddress, + dhcpSnoopVid VlanIndex, + dhcpSnoopMask INTEGER, + dhcpSnoopGateway IpAddress, + dhcpSnoopRouteMap OCTET STRING + } + + dhcpSnoopIp OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The snooped IP address." + ::= { dhcpSnoopIpEntry 1 } + + dhcpSnoopMac OBJECT-TYPE + SYNTAX PhysAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The snooped MAC address." + ::= { dhcpSnoopIpEntry 2 } + + dhcpSnoopVid OBJECT-TYPE + SYNTAX VlanIndex + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The snooped VLAN ID." + ::= { dhcpSnoopIpEntry 3 } + + dhcpSnoopMask OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The snooped IP mask" + ::= { dhcpSnoopIpEntry 4 } + + dhcpSnoopGateway OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The snooped Gateway." + ::= { dhcpSnoopIpEntry 5 } + + dhcpSnoopRouteMap OBJECT-TYPE + SYNTAX OCTET STRING + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The refrence bit map of the dhcp route" + ::= { dhcpSnoopIpEntry 6 } + +-- dhcpSnoopCounterTable + + dhcpSnoopCounterTable OBJECT-TYPE + SYNTAX SEQUENCE OF DhcpSnoopCounterEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table shows the DHCP statistics." + ::= { dhcpStats 2 } + + dhcpSnoopCounterEntry OBJECT-TYPE + SYNTAX DhcpSnoopCounterEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry of dhcpSnoopCounterTable." + INDEX { ifIndex } + ::= { dhcpSnoopCounterTable 1 } + + DhcpSnoopCounterEntry ::= + SEQUENCE { + dhcpDiscovery Counter64, + dhcpOffer Counter64, + dhcpRequest Counter64, + dhcpAck Counter64, + dhcpAckBySnoopFull Counter64 + } + + dhcpDiscovery OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of received DHCP server discovery packets." + ::= { dhcpSnoopCounterEntry 1 } + + dhcpOffer OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of received DHCP server offer packets." + ::= { dhcpSnoopCounterEntry 2 } + + dhcpRequest OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of received DHCP IP request packets." + ::= { dhcpSnoopCounterEntry 3 } + + dhcpAck OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of received DHCP IP acknowledge packets." + ::= { dhcpSnoopCounterEntry 4 } + + dhcpAckBySnoopFull OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of received DHCP IP acknowledge packets that replace the oldest snooping + entry in snooping table due to table full." + ::= { dhcpSnoopCounterEntry 5 } + + dhcpRouteTable OBJECT-TYPE + SYNTAX SEQUENCE OF DhcpRouteEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table that contains dhcp route information." + ::= { dhcpStats 3 } + + dhcpRouteEntry OBJECT-TYPE + SYNTAX DhcpRouteEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry of dhcpRouteTable." + INDEX { dhcpRouteIndex } + ::= { dhcpRouteTable 1 } + + DhcpRouteEntry ::= + SEQUENCE { + dhcpRouteIndex INTEGER, + dhcpRouteVid VlanIndex, + dhcpRouteIP IpAddress, + dhcpRouteMask INTEGER, + dhcpRouteGwIP IpAddress + } + + dhcpRouteIndex OBJECT-TYPE + SYNTAX INTEGER (1..24) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "" + ::= { dhcpRouteEntry 1 } + + dhcpRouteVid OBJECT-TYPE + SYNTAX VlanIndex + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The VLAN-ID refering to this dhcp route." + ::= { dhcpRouteEntry 2 } + + + dhcpRouteIP OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "IP of this dhcp route" + ::= { dhcpRouteEntry 3 } + + dhcpRouteMask OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The subnet mask of source IP mask." + ::= { dhcpRouteEntry 4 } + + dhcpRouteGwIP OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The gateway IP address." + ::= { dhcpRouteEntry 5 } + +-------------------- +-- PAE PVC +-------------------- + +-- paepvcSessionTable + + paepvcSessionTable OBJECT-TYPE + SYNTAX SEQUENCE OF PaepvcSessionEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table shows the paepvc session statistics." + ::= { paepvcStats 1 } + + paepvcSessionEntry OBJECT-TYPE + SYNTAX PaepvcSessionEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry of paepvcSessionTable." + INDEX { ifIndex , paepvcSessionVpi, paepvcSessionVci } + ::= { paepvcSessionTable 1 } + + PaepvcSessionEntry ::= + SEQUENCE { + paepvcSessionVpi INTEGER, + paepvcSessionVci INTEGER, + paepvcSessionState INTEGER, + paepvcSessionId INTEGER, + paepvcSessionUptime Unsigned32, + paepvcSessionacname DisplayString, + paepvcSessionsrvcname DisplayString + } + + paepvcSessionVpi OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The PAEPVC VPI." + ::= { paepvcSessionEntry 1 } + + paepvcSessionVci OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The PAEPVC VCI." + ::= { paepvcSessionEntry 2 } + + paepvcSessionState OBJECT-TYPE + SYNTAX INTEGER { + down(1), + pppoe(2), + ppp(3), + up(4) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The PAEPVC status." + ::= { paepvcSessionEntry 3 } + + paepvcSessionId OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The PAEPVC session ID." + ::= { paepvcSessionEntry 4 } + + paepvcSessionUptime OBJECT-TYPE + SYNTAX Unsigned32 + UNITS "second" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The PAEPVC session uptime." + ::= { paepvcSessionEntry 5 } + + paepvcSessionacname OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Access concentrator name." + ::= { paepvcSessionEntry 6 } + + paepvcSessionsrvcname OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Service name." + ::= { paepvcSessionEntry 7 } + +-- paepvcCountTable + + paepvcCountTable OBJECT-TYPE + SYNTAX SEQUENCE OF PaepvcCountEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table shows the paepvc counters." + ::= { paepvcStats 2 } + + paepvcCountEntry OBJECT-TYPE + SYNTAX PaepvcCountEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry of paepvcCountTable." + INDEX { ifIndex , paepvcCountVpi, paepvcCountVci } + ::= { paepvcCountTable 1 } + + PaepvcCountEntry ::= + SEQUENCE { + paepvcCountVpi INTEGER, + paepvcCountVci INTEGER, + paepvcCountPppLcpCfgReqRx Unsigned32, + paepvcCountPppLcpEchoReqRx Unsigned32, + paepvcCountPppLcpEchoReplyRx Unsigned32, + paepvcCountPadiTx Unsigned32, + paepvcCountPadoRx Unsigned32, + paepvcCountPadrTx Unsigned32, + paepvcCountPadsRx Unsigned32, + paepvcCountPadtTx Unsigned32, + paepvcCountPadtRx Unsigned32, + paepvcCountSrvcnameErrRx Unsigned32, + paepvcCountAcSystemErrRx Unsigned32, + paepvcCountGenericErrTx Unsigned32, + paepvcCountGenericErrRx Unsigned32 + } + + + paepvcCountVpi OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The PAEPVC VPI." + ::= { paepvcCountEntry 1 } + + paepvcCountVci OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The PAEPVC VCI." + ::= { paepvcCountEntry 2 } + + paepvcCountPppLcpCfgReqRx OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of ppp lcp config-request received." + ::= { paepvcCountEntry 3 } + + paepvcCountPppLcpEchoReqRx OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of ppp lcp echo-request received." + ::= { paepvcCountEntry 4 } + + paepvcCountPppLcpEchoReplyRx OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of ppp lcp echo-reply received." + ::= { paepvcCountEntry 5 } + + paepvcCountPadiTx OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of pppoe padi transfered" + ::= { paepvcCountEntry 6 } + + paepvcCountPadoRx OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of pppoe pado received" + ::= { paepvcCountEntry 7 } + + paepvcCountPadrTx OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of pppoe padr transfered" + ::= { paepvcCountEntry 8 } + + paepvcCountPadsRx OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of pppoe pads received" + ::= { paepvcCountEntry 9 } + + paepvcCountPadtTx OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of pppoe padt transfered" + ::= { paepvcCountEntry 10 } + + paepvcCountPadtRx OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of pppoe padt received" + ::= { paepvcCountEntry 11 } + + paepvcCountSrvcnameErrRx OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of pppoe service name error received" + ::= { paepvcCountEntry 12 } + + paepvcCountAcSystemErrRx OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of pppoe access concentrator name error received" + ::= { paepvcCountEntry 13 } + + paepvcCountGenericErrTx OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of pppoe generic error transfered" + ::= { paepvcCountEntry 14 } + + paepvcCountGenericErrRx OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of pppoe generic error received" + ::= { paepvcCountEntry 15 } + +-------------------- +-- MAC +-------------------- + + macDisplayTarget OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This managed object is a filter used for identify the target from which + the MAC addresses are learned in macTable. The target could be: + 99: all ports in the system + 98: all subscriber ports + 97: all Ethernet ports + + IfIndex is used for identifying subscriber ports and Ethernet Ports(e.g. 1 ~ 50)." + ::= { macStats 1 } + +-- macTable + + macTable OBJECT-TYPE + SYNTAX SEQUENCE OF MacEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table that contains information about unicast + entries for which the bridge has forwarding and/or + filtering information. This information is used + by the transparent bridging function in + determining how to propagate a received frame." + ::= { macStats 2 } + + macEntry OBJECT-TYPE + SYNTAX MacEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry of macTable." + INDEX { macAddress } + ::= { macTable 1 } + + MacEntry ::= + SEQUENCE { + macAddress MacAddress, + macPort INTEGER, + macStatus INTEGER + } + + macAddress OBJECT-TYPE + SYNTAX MacAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A unicast MAC address for which the bridge has + forwarding and/or filtering information." + ::= { macEntry 1 } + + macPort OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The port from which the mac address has been learned." + ::= { macEntry 2 } + + macStatus OBJECT-TYPE + SYNTAX INTEGER { + other(1), + invalid(2), + learned(3), + self(4), + mgmt(5) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The status of this entry." + ::= { macEntry 3 } + +-------------------- +-- ipbpvc +-------------------- + +-- arpproxyTable + + arpproxyTable OBJECT-TYPE + SYNTAX SEQUENCE OF ArpproxyEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Display ARP table. This table is supported by R3.00 and later versions." + ::= { ipbpvcStats 1 } + + arpproxyEntry OBJECT-TYPE + SYNTAX ArpproxyEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry of arpproxyTable." + INDEX { ipbpvcDomainName, arpproxyIp } + ::= { arpproxyTable 1 } + + ArpproxyEntry ::= + SEQUENCE { + arpproxyIp IpAddress, + arpproxyMac MacAddress, + arpproxyIfIndex INTEGER, + arpproxyVpi INTEGER, + arpproxyVci INTEGER, + arpproxyInterfaceIp IpAddress, + arpproxyInterfaceMask INTEGER, + arpproxyInterfaceVid VlanIndex, + arpproxyDhcpIp INTEGER, + arpproxyType INTEGER + } + + arpproxyIp OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "" + ::= { arpproxyEntry 1 } + + arpproxyMac OBJECT-TYPE + SYNTAX MacAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "" + ::= { arpproxyEntry 2 } + + arpproxyIfIndex OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "" + ::= { arpproxyEntry 3 } + + arpproxyVpi OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "" + ::= { arpproxyEntry 4 } + + arpproxyVci OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "" + ::= { arpproxyEntry 5 } + + arpproxyInterfaceIp OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "" + ::= { arpproxyEntry 6 } + + arpproxyInterfaceMask OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "" + ::= { arpproxyEntry 7 } + + arpproxyInterfaceVid OBJECT-TYPE + SYNTAX VlanIndex + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "" + ::= { arpproxyEntry 8 } + + arpproxyDhcpIp OBJECT-TYPE + SYNTAX INTEGER { + true(1), + false(2) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "" + ::= { arpproxyEntry 9 } + + arpproxyType OBJECT-TYPE + SYNTAX INTEGER { + upstream(1), + downstream(2) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "" + ::= { arpproxyEntry 10 } + +-- ipbpvcIfDynamicTable + + ipbpvcIfDynamicTable OBJECT-TYPE + SYNTAX SEQUENCE OF IpbpvcIfDynamicEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Display runtime interfaces. This table is supported by R3.00 and later versions." + ::= { ipbpvcStats 2 } + + ipbpvcIfDynamicEntry OBJECT-TYPE + SYNTAX IpbpvcIfDynamicEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry of ipbpvcIfDynamicTable." + INDEX { ipbpvcDomainName, ipbpvcIfDynamicIp, ipbpvcIfDynamicMask, ipbpvcDomainVlanId } + ::= { ipbpvcIfDynamicTable 1 } + + IpbpvcIfDynamicEntry ::= + SEQUENCE { + ipbpvcIfDynamicIp IpAddress, + ipbpvcIfDynamicMask INTEGER, + ipbpvcIfDynamicIfIndex INTEGER, + ipbpvcIfDynamicVpi INTEGER, + ipbpvcIfDynamicVci INTEGER + } + + ipbpvcIfDynamicIp OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "" + ::= { ipbpvcIfDynamicEntry 1 } + + ipbpvcIfDynamicMask OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "" + ::= { ipbpvcIfDynamicEntry 2 } + + ipbpvcIfDynamicIfIndex OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "" + ::= { ipbpvcIfDynamicEntry 3 } + + ipbpvcIfDynamicVpi OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "" + ::= { ipbpvcIfDynamicEntry 4 } + + ipbpvcIfDynamicVci OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "" + ::= { ipbpvcIfDynamicEntry 5 } + +-- ipbpvcRouteDynamicTable + + ipbpvcRouteDynamicTable OBJECT-TYPE + SYNTAX SEQUENCE OF IpbpvcRouteDynamicEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Display runtime routing table. This table is supported by R3.00 and later versions." + ::= { ipbpvcStats 3 } + + ipbpvcRouteDynamicEntry OBJECT-TYPE + SYNTAX IpbpvcRouteDynamicEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry of ipbpvcRouteDynamicTable." + INDEX { ipbpvcDomainName, ipbpvcRouteDynamicType, ipbpvcRouteDynamicIp, ipbpvcRouteDynamicMask } + ::= { ipbpvcRouteDynamicTable 1 } + + IpbpvcRouteDynamicEntry ::= + SEQUENCE { + ipbpvcRouteDynamicType INTEGER, + ipbpvcRouteDynamicIp IpAddress, + ipbpvcRouteDynamicMask INTEGER, + ipbpvcRouteDynamicNextHop IpAddress, + ipbpvcRouteDynamicMetric INTEGER, + ipbpvcRouteDynamicPriority INTEGER + } + + ipbpvcRouteDynamicType OBJECT-TYPE + SYNTAX INTEGER { + upstream(1), + downstream(2) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "" + ::= { ipbpvcRouteDynamicEntry 1 } + + ipbpvcRouteDynamicIp OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "" + ::= { ipbpvcRouteDynamicEntry 2 } + + ipbpvcRouteDynamicMask OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "" + ::= { ipbpvcRouteDynamicEntry 3 } + + ipbpvcRouteDynamicNextHop OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "" + ::= { ipbpvcRouteDynamicEntry 4 } + + ipbpvcRouteDynamicMetric OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "" + ::= { ipbpvcRouteDynamicEntry 5 } + + ipbpvcRouteDynamicPriority OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "" + ::= { ipbpvcRouteDynamicEntry 6 } + +------------------------------ +-- enetStats +------------------------------ + + enetSfpInfoTable OBJECT-TYPE + SYNTAX SEQUENCE OF EnetSfpInfoEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table includes sfp info of enet port." + ::= { enetStats 2 } + + enetSfpInfoEntry OBJECT-TYPE + SYNTAX EnetSfpInfoEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in enetSfpInfoTable." + INDEX {ifIndex} + ::= { enetSfpInfoTable 1 } + + EnetSfpInfoEntry ::= + SEQUENCE { + enetSfpInfoTxpower INTEGER, + enetSfpInfoRxpower INTEGER, + enetSfpInfoTemperature INTEGER, + enetSfpInfoTxBias INTEGER, + enetSfpInfoVoltage INTEGER + } + + enetSfpInfoTxpower OBJECT-TYPE + SYNTAX INTEGER (1..65535) + UNITS "10^-4 mW" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Measured Tx Output Power." + ::= { enetSfpInfoEntry 1 } + + enetSfpInfoRxpower OBJECT-TYPE + SYNTAX INTEGER (1..65535) + UNITS "10^-4 C" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Measured Rx Output Power." + ::= { enetSfpInfoEntry 2 } + + enetSfpInfoTemperature OBJECT-TYPE + SYNTAX INTEGER (-1280000..1280000) + UNITS "10^-4 C" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Measured temperature." + ::= { enetSfpInfoEntry 3 } + + enetSfpInfoTxBias OBJECT-TYPE + SYNTAX INTEGER (0..131000) + UNITS "10^-3 mA" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Measured tx bias." + ::= { enetSfpInfoEntry 4 } + + enetSfpInfoVoltage OBJECT-TYPE + SYNTAX INTEGER (0..65000) + UNITS "0.1mV" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Measured voltage." + ::= { enetSfpInfoEntry 5 } + +------------------------------ +-- adslStats +------------------------------ + + adslPortUtilTable OBJECT-TYPE + SYNTAX SEQUENCE OF AdslPortUtilEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table includes adsl port utilization." + ::= { adslStats 1 } + + adslPortUtilEntry OBJECT-TYPE + SYNTAX AdslPortUtilEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in adslPortUtilEntry." + INDEX {ifIndex} + ::= { adslPortUtilTable 1 } + + AdslPortUtilEntry ::= + SEQUENCE { + adslPortUtilTx INTEGER, + adslPortUtilRx INTEGER + } + + adslPortUtilTx OBJECT-TYPE + SYNTAX INTEGER (0..100) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Measure adsl port's tx utilization." + ::= { adslPortUtilEntry 1 } + + adslPortUtilRx OBJECT-TYPE + SYNTAX INTEGER (0..100) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Measure adsl port's rx utilization." + ::= { adslPortUtilEntry 2 } + +---------------------------------------- +-- macFfStats +---------------------------------------- + macFfStatsTable OBJECT-TYPE + SYNTAX SEQUENCE OF MacFfStatsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table that contains MAC Force Forwarding static configuration and dynamic information." + ::= { macffStats 1 } + + macFfStatsEntry OBJECT-TYPE + SYNTAX MacFfStatsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry of macFfStatsTable." + INDEX { macFfStatsIndex } + ::= { macFfStatsTable 1 } + + MacFfStatsEntry ::= + SEQUENCE { + macFfStatsIndex INTEGER, + macFfStatsVid VlanIndex, + macFfStatsArIP IpAddress, + macFfStatsSrcIP IpAddress, + macFfStatsSrcMask INTEGER + } + + macFfStatsIndex OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Index of the MACFF." + ::= { macFfStatsEntry 1 } + + macFfStatsVid OBJECT-TYPE + SYNTAX VlanIndex + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The VLAN-ID refering to this AR/AS." + ::= { macFfStatsEntry 2 } + + + macFfStatsArIP OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "IP of this AR/AS" + ::= { macFfStatsEntry 3 } + + macFfStatsSrcIP OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The source IP address of the MACFF." + ::= { macFfStatsEntry 4 } + + macFfStatsSrcMask OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The subnet mask of source IP mask." + ::= { macFfStatsEntry 5 } + + macFfArpTable OBJECT-TYPE + SYNTAX SEQUENCE OF MacFfArpEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table that contains MAC Force Forwarding ARP information." + ::= { macffStats 2 } + + macFfArpEntry OBJECT-TYPE + SYNTAX MacFfArpEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry of macFfArpTable." + INDEX { macFfArpVid, macFfArpIP} + ::= { macFfArpTable 1 } + + MacFfArpEntry ::= + SEQUENCE { + macFfArpVid VlanIndex, + macFfArpIP IpAddress, + macFfArpPort INTEGER, + macFfArpMac PhysAddress + } + + macFfArpVid OBJECT-TYPE + SYNTAX VlanIndex + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The VLAN-ID refering to this AR/AS." + ::= { macFfArpEntry 1 } + + macFfArpIP OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "IP of this AR/AS." + ::= { macFfArpEntry 2 } + + + macFfArpPort OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Port of this AR/AS." + ::= { macFfArpEntry 3 } + + macFfArpMac OBJECT-TYPE + SYNTAX PhysAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "MAC address of the AR or AS." + ::= { macFfArpEntry 4 } + + macFfArpCounterTable OBJECT-TYPE + SYNTAX SEQUENCE OF MacFfArpCounterEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table that contains MAC Force Forwarding ARP counter information." + ::= { macffStats 3 } + + macFfArpCounterEntry OBJECT-TYPE + SYNTAX MacFfArpCounterEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry of macFfArpCounterTable." + INDEX { ifIndex } + ::= { macFfArpCounterTable 1 } + + MacFfArpCounterEntry ::= + SEQUENCE { + macFfArpCounterRequestTX Counter32, + macFfArpCounterRequestRX Counter32, + macFfArpCounterRequestRXDrop Counter32, + macFfArpCounterReplyTX Counter32, + macFfArpCounterReplyRX Counter32, + macFfArpCounterReplyRXDrop Counter32 + } + + macFfArpCounterRequestTX OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "ARP Request TX counter." + ::= { macFfArpCounterEntry 1 } + + macFfArpCounterRequestRX OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "ARP Request RX counter." + ::= { macFfArpCounterEntry 2 } + + macFfArpCounterRequestRXDrop OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "ARP Request RX drop counter." + ::= { macFfArpCounterEntry 3 } + + macFfArpCounterReplyTX OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "ARP Reply TX counter." + ::= { macFfArpCounterEntry 4 } + + macFfArpCounterReplyRX OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "ARP Reply RX counter." + ::= { macFfArpCounterEntry 5 } + + macFfArpCounterReplyRXDrop OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "ARP Reply RX drop counter." + ::= { macFfArpCounterEntry 6 } +---------------------------------------- +-- clear +---------------------------------------- + + counterClearTarget OBJECT-TYPE + SYNTAX OCTET STRING + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This managed object is used for identify the target on which + the counter would be cleared. The target is encoded as: + Byte 1: reserved + Byte 2~3: reserved + Byte 4: reserved + Byte 5~11:each octet specifies a set of eight ports, with the first + octet specifying ports 1 through 8, etc." + ::= { clear 1 } + + counterClearOps OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The corresponding bit is set to 1 to start the operation. + The various bit positions are: + BIT 1: clear interface counters + BIT 2: clear pvc packet counters + BIT 3: clear port ATM counters + BIT 4: clear pvc ATM counters + BIT 5: clear DHCP counters + BIT 6: clear IGMP counters + BIT 7: clear IGMP port counters + BIT 8: clear MACFF ARP counters + BIT 9: clear current lineperf + BIT 10: clear current 15 minute lineperf + BIT 11: clear current 1 day lineperf" + ::= { clear 2 } + + counterClearVpi OBJECT-TYPE + SYNTAX INTEGER (0..255) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "VPI of the pvc whose counters would be cleared." + ::= { clear 3 } + + counterClearVci OBJECT-TYPE + SYNTAX INTEGER (1..65535) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "VCI of the pvc whose counters would be cleared." + ::= { clear 4 } + +END |