diff options
Diffstat (limited to 'MIBS/bluecoat/BLUECOAT-SG-DISK-MIB')
| -rw-r--r-- | MIBS/bluecoat/BLUECOAT-SG-DISK-MIB | 192 |
1 files changed, 192 insertions, 0 deletions
diff --git a/MIBS/bluecoat/BLUECOAT-SG-DISK-MIB b/MIBS/bluecoat/BLUECOAT-SG-DISK-MIB new file mode 100644 index 0000000..d80f954 --- /dev/null +++ b/MIBS/bluecoat/BLUECOAT-SG-DISK-MIB @@ -0,0 +1,192 @@ +BLUECOAT-SG-DISK-MIB DEFINITIONS ::= BEGIN + +IMPORTS + MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, Counter32, Integer32 + FROM SNMPv2-SMI + TEXTUAL-CONVENTION, TimeStamp, TruthValue, DisplayString + FROM SNMPv2-TC + blueCoatMgmt + FROM BLUECOAT-MIB; + +deviceDiskMIB MODULE-IDENTITY + LAST-UPDATED "201307110300Z" + ORGANIZATION "Blue Coat Systems, Inc." + CONTACT-INFO "support.services@bluecoat.com + http://www.bluecoat.com" + DESCRIPTION "The deviceDiskMIB is used to monitor + the status of the device disks." + REVISION "201307110300Z" + DESCRIPTION "Access level for deviceDiskTrapEnabled changed." + REVISION "200711050300Z" + DESCRIPTION "Minor corrections and reformatting." + REVISION "200211060300Z" + DESCRIPTION "Initial revision of this MIB." + ::= { blueCoatMgmt 2 } + +deviceDiskMIBObjects + OBJECT IDENTIFIER ::= { deviceDiskMIB 1 } + +deviceDiskMIBNotifications + OBJECT IDENTIFIER ::= { deviceDiskMIB 2 } + +deviceDiskMIBNotificationsPrefix + OBJECT IDENTIFIER ::= { deviceDiskMIBNotifications 0 } + +-- textual conventions + +DiskStatus ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION "Indicates the operational status of the disk. + present(1) - the agent disk is operational. + initializing(2) - the disk is being formatted by the device for use. + inserted(3) - the disk has been inserted into the device. + offline(4) - the disk has been taken offline by the system. + removed(5) - the disk is being removed from the drive slot. + notpresent(6) - no disk is present in drive slot. + empty(7) - the drive slot is not in use. + ioerror(8) - the drive had disk io error + unusable(9) - the drive is unusable + unknown(10) - cannot determine disk status." + + SYNTAX INTEGER { + present(1), + initializing(2), + inserted(3), + offline(4), + removed(5), + notpresent(6), + empty(7), + ioerror(8), + unusable(9), + unknown(10) + } + +-- +-- MIB variables +-- + +deviceDiskValues + OBJECT IDENTIFIER ::= { deviceDiskMIBObjects 1 } + +-- +-- deviceDiskValueTable +-- + +deviceDiskValueTable OBJECT-TYPE + SYNTAX SEQUENCE OF DeviceDiskValueEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "Table of disks." + ::= { deviceDiskValues 1 } + +deviceDiskValueEntry OBJECT-TYPE + SYNTAX DeviceDiskValueEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "An deviceDiskValueTable entry describes the + characteristics and operational status of a disk." + INDEX { deviceDiskIndex } + ::= { deviceDiskValueTable 1 } + +DeviceDiskValueEntry ::= SEQUENCE { + deviceDiskIndex INTEGER, + deviceDiskTrapEnabled TruthValue, + deviceDiskStatus DiskStatus, + deviceDiskTimeStamp TimeStamp, + deviceDiskVendor DisplayString, + deviceDiskProduct DisplayString, + deviceDiskRevision DisplayString, + deviceDiskSerialN DisplayString, + deviceDiskBlockSize Counter32, + deviceDiskBlockCount Counter32 + } + +deviceDiskIndex OBJECT-TYPE + SYNTAX Integer32 (1..2147483647) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "An arbitrary value which uniquely identifies the disk." + ::= { deviceDiskValueEntry 1 } + +deviceDiskTrapEnabled OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION "This variable controls generation of deviceDiskTrap + for this disk. When this variable is true(1), + generation of deviceDiskTrap is enabled. When this + variable is false(2), generation of deviceDiskTrap + is disabled. The default start-up value is true(1)." + ::= { deviceDiskValueEntry 2 } + +deviceDiskStatus OBJECT-TYPE + SYNTAX DiskStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION "This variable indicates the present operational status + of the disk." + ::= { deviceDiskValueEntry 3 } + +deviceDiskTimeStamp OBJECT-TYPE + SYNTAX TimeStamp + UNITS "Hundredths of seconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "This variable indicates when the value of + deviceDiskStatus was last reported." + ::= { deviceDiskValueEntry 4 } + +deviceDiskVendor OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The vendor name." + ::= { deviceDiskValueEntry 5 } + +deviceDiskProduct OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The product name." + ::= { deviceDiskValueEntry 6 } + +deviceDiskRevision OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Revision code." + ::= { deviceDiskValueEntry 7 } + +deviceDiskSerialN OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Serial number of the disk." + ::= { deviceDiskValueEntry 8 } + +deviceDiskBlockSize OBJECT-TYPE + SYNTAX Counter32 + UNITS "Bytes" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Block size drive has been formatted to in bytes." + ::= { deviceDiskValueEntry 9 } + +deviceDiskBlockCount OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The number of blocks on the drive." + ::= { deviceDiskValueEntry 10 } + +-- +-- notifications +-- + +deviceDiskTrap NOTIFICATION-TYPE + OBJECTS { deviceDiskStatus } + STATUS current + DESCRIPTION "The disk status warrants a notification." + ::= { deviceDiskMIBNotificationsPrefix 1 } + +END |