diff options
Diffstat (limited to 'MIBS/bats')
| -rw-r--r-- | MIBS/bats/AATS-MIB | 1298 |
1 files changed, 1298 insertions, 0 deletions
diff --git a/MIBS/bats/AATS-MIB b/MIBS/bats/AATS-MIB new file mode 100644 index 0000000..6517ed6 --- /dev/null +++ b/MIBS/bats/AATS-MIB @@ -0,0 +1,1298 @@ + +AATS-MIB DEFINITIONS ::= BEGIN + +IMPORTS + MODULE-IDENTITY, OBJECT-TYPE, Integer32, IpAddress, enterprises + FROM SNMPv2-SMI + MODULE-COMPLIANCE, OBJECT-GROUP + FROM SNMPv2-CONF + DisplayString + FROM SNMPv2-TC +; + +aats MODULE-IDENTITY + LAST-UPDATED "202102241815Z" + ORGANIZATION "Broadband Antenna Tracking systems" + + CONTACT-INFO + "E-mail: support@batswireless.com" + DESCRIPTION + "The MIB Module for BATS Software." + REVISION "202102241815Z" + DESCRIPTION + "Updated on 202102241815." + ::= { enterprises 37069 } + +-- +-- top level structure +-- + +aatsDot1 OBJECT IDENTIFIER ::= { aats 1 } +system OBJECT IDENTIFIER ::= { aatsDot1 1 } +radio OBJECT IDENTIFIER ::= { aatsDot1 2 } +linkStatus OBJECT IDENTIFIER ::= { radio 3 } +rssi OBJECT IDENTIFIER ::= { radio 4 } +snr OBJECT IDENTIFIER ::= { radio 5 } +linkDistance OBJECT IDENTIFIER ::= { radio 6 } +remote OBJECT IDENTIFIER ::= { radio 7 } +positioner OBJECT IDENTIFIER ::= { aatsDot1 3 } +positionerDot1 OBJECT IDENTIFIER ::= { positioner 1 } +azimuth OBJECT IDENTIFIER ::= { positionerDot1 3 } +elevation OBJECT IDENTIFIER ::= { positionerDot1 4 } +antennaHeading OBJECT IDENTIFIER ::= { positionerDot1 5 } +currentGPSHdgAcl OBJECT IDENTIFIER ::= { aatsDot1 4 } +currentGPSStatus OBJECT IDENTIFIER ::= { currentGPSHdgAcl 2 } +currentGPSTimestamp OBJECT IDENTIFIER ::= { currentGPSHdgAcl 3 } +currentGPSLatitude OBJECT IDENTIFIER ::= { currentGPSHdgAcl 4 } +currentGPSLongitude OBJECT IDENTIFIER ::= { currentGPSHdgAcl 5 } +currentGPSAltitude OBJECT IDENTIFIER ::= { currentGPSHdgAcl 6 } +currentHeadingSection OBJECT IDENTIFIER ::= { currentGPSHdgAcl 7 } +currentHeadingStatus OBJECT IDENTIFIER ::= { currentHeadingSection 1 } +currentHeading OBJECT IDENTIFIER ::= { currentHeadingSection 2 } +currentAccel OBJECT IDENTIFIER ::= { currentGPSHdgAcl 8 } +currentPitch OBJECT IDENTIFIER ::= { currentAccel 1 } +currentRoll OBJECT IDENTIFIER ::= { currentAccel 2 } +localGPSHdgAcl OBJECT IDENTIFIER ::= { aatsDot1 5 } +localGPSStatus OBJECT IDENTIFIER ::= { localGPSHdgAcl 2 } +localGPSTimestamp OBJECT IDENTIFIER ::= { localGPSHdgAcl 3 } +localGPSLatitude OBJECT IDENTIFIER ::= { localGPSHdgAcl 4 } +localGPSLongitude OBJECT IDENTIFIER ::= { localGPSHdgAcl 5 } +localGPSAltitude OBJECT IDENTIFIER ::= { localGPSHdgAcl 6 } +localHeadingSection OBJECT IDENTIFIER ::= { localGPSHdgAcl 7 } +localHeadingStatus OBJECT IDENTIFIER ::= { localHeadingSection 1 } +localHeading OBJECT IDENTIFIER ::= { localHeadingSection 2 } +localAccel OBJECT IDENTIFIER ::= { localGPSHdgAcl 8 } +localPitch OBJECT IDENTIFIER ::= { localAccel 1 } +localRoll OBJECT IDENTIFIER ::= { localAccel 2 } +networkGPSHdgAcl OBJECT IDENTIFIER ::= { aatsDot1 6 } +networkGPSStatus OBJECT IDENTIFIER ::= { networkGPSHdgAcl 2 } +networkGPSTimestamp OBJECT IDENTIFIER ::= { networkGPSHdgAcl 3 } +networkGPSLatitude OBJECT IDENTIFIER ::= { networkGPSHdgAcl 4 } +networkGPSLongitude OBJECT IDENTIFIER ::= { networkGPSHdgAcl 5 } +networkGPSAltitude OBJECT IDENTIFIER ::= { networkGPSHdgAcl 6 } +networkHeadingSection OBJECT IDENTIFIER ::= { networkGPSHdgAcl 7 } +networkHeadingStatus OBJECT IDENTIFIER ::= { networkHeadingSection 1 } +networkHeading OBJECT IDENTIFIER ::= { networkHeadingSection 2 } +networkAccel OBJECT IDENTIFIER ::= { networkGPSHdgAcl 8 } +networkPitch OBJECT IDENTIFIER ::= { networkAccel 1 } +networkRoll OBJECT IDENTIFIER ::= { networkAccel 2 } + +status OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..255)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The current system status" + ::= { system 1 } + +active OBJECT-TYPE + SYNTAX INTEGER { inactive(0), active(1) } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Specifies if the system is currently active. When an integer 1 is set, the system will restart the scan sequence. When an integer 0 is set, the system will stop" + ::= { system 2 } + +stowed OBJECT-TYPE + SYNTAX INTEGER { unstowed(0), stowed(1) } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Specifies if the system is currently stowed. When an integer 1 is set, the system will begin stowing. When an integer 0 is set, the system will begin unstowing. (Additional license is required)" + ::= { system 3 } + +cpuTemp OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Specifies if the cpu temperature in celsius (-1000 if n/a)" + ::= { system 4 } + +radioName OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..255)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Specifies the current radio name" + ::= { radio 1 } + +radioConnected OBJECT-TYPE + SYNTAX INTEGER { disconnected(0), connected(1) } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Specifies if the radio is currently connected" + ::= { radio 2 } + +linkStatusString OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..255)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The string used to identify Link Status" + ::= { linkStatus 1 } + +linkStatusInt OBJECT-TYPE + SYNTAX INTEGER { disconnected(0), marginal(1), connected(2) } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The current link status from the radio 0 = Disconnected, 1 = Marginal, 2 = Connected" + ::= { linkStatus 2 } + +linkStatusVal OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..255)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The current link status from the radio Disconnected, Marginal, or Connected" + ::= { linkStatus 3 } + +rssiString OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..255)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The string used to identify RSSI" + ::= { rssi 1 } + +rssiInt OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The current rssi from the radio, divde by 100 to get actual value" + ::= { rssi 2 } + +rssiFloat OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..255)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The current rssi from the radio" + ::= { rssi 3 } + +snrString OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..255)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The string used to identify SNR" + ::= { snr 1 } + +snrInt OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The current snr from the radio, divde by 100 to get actual value" + ::= { snr 2 } + +snrFloat OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..255)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The current snr from the radio" + ::= { snr 3 } + +linkDistanceString OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..255)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The string used to identify Link Distance" + ::= { linkDistance 1 } + +linkDistanceMeters OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The current calculated link distance from the radio in meters" + ::= { linkDistance 2 } + +linkDistanceMiles OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The current calculated link distance from the radio in miles" + ::= { linkDistance 3 } + +remoteString OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..255)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The string used to identify Remote" + ::= { remote 1 } + +remoteIP OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The IP address of the remote radio reported from the local radio. NOTE: Not available on all radios" + ::= { remote 2 } + +remoteMAC OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..255)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The MAC address of the remote radio reported from the local radio. NOTE: Not available on all radios" + ::= { remote 3 } + +positionerConnected OBJECT-TYPE + SYNTAX INTEGER { disconnected(0), connected(1) } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Specifies if the positioner is currently connected" + ::= { positionerDot1 1 } + +positionerMoving OBJECT-TYPE + SYNTAX INTEGER { stopped(0), moving(1) } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Specifies if the positioner is currently moving" + ::= { positionerDot1 2 } + +azimuthString OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..255)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The string used to identify azimuth" + ::= { azimuth 1 } + +azimuthInt OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The current azimuth from the positioner in degrees (-180 - 180), divde by 100 to get actual value" + ::= { azimuth 2 } + +azimuthFloat OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..255)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The current azimuth from the positioner in degrees (-180 - 180)" + ::= { azimuth 3 } + +azimuth360ScaleInt OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The current azimuth from the positioner in degrees (0 - 360), divde by 100 to get actual value" + ::= { azimuth 4 } + +azimuth360ScaleFloat OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..255)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The current azimuth from the positioner in degrees (0 - 360)" + ::= { azimuth 5 } + +elevationString OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..255)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The string used to identify elevation" + ::= { elevation 1 } + +elevationInt OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The current elevation from the positioner in degrees, divde by 100 to get actual value" + ::= { elevation 2 } + +elevationFloat OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..255)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The current elevation from the positioner in degrees" + ::= { elevation 3 } + +antennaHeadingString OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..255)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The string used to identify Antenna Heading" + ::= { antennaHeading 1 } + +antennaHeadingInt OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The current antenna heading in degrees (-180 - 180), divde by 100 to get actual value" + ::= { antennaHeading 2 } + +antennaHeadingFloat OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..255)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The current antenna heading in degrees (-180 - 180)" + ::= { antennaHeading 3 } + +antennaHeading360ScaleInt OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The current antenna heading in degrees (0 - 360), divde by 100 to get actual value" + ::= { antennaHeading 4 } + +antennaHeading360ScaleFloat OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..255)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The current antenna heading in degrees (0 - 360)" + ::= { antennaHeading 5 } + +currentGPSHdgAclString OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..255)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The string used to identify current GPS/Heading/Accel" + ::= { currentGPSHdgAcl 1 } + +currentGPSStatusString OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..255)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The string used to identify current GPS Status" + ::= { currentGPSStatus 1 } + +currentGPSStatusInt OBJECT-TYPE + SYNTAX INTEGER { invalid(0), valid(1) } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The current GPS Status" + ::= { currentGPSStatus 2 } + +currentGPSStatusValue OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..255)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The current GPS Status" + ::= { currentGPSStatus 3 } + +currentGPSTimestampString OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..255)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The string used to identify current GPS Timestamp" + ::= { currentGPSTimestamp 1 } + +currentGPSTimestampInt OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The current GPS Timestamp, divde by 1000 to get actual value" + ::= { currentGPSTimestamp 2 } + +currentGPSTimestampValue OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..255)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The current GPS Timestamp" + ::= { currentGPSTimestamp 3 } + +currentGPSLatitudeString OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..255)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The string used to identify current GPS Latitude" + ::= { currentGPSLatitude 1 } + +currentGPSLatitudeInt OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The current GPS Latitude, divde by 10000 to get actual value" + ::= { currentGPSLatitude 2 } + +currentGPSLatitudeFloat OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..255)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The current GPS Latitude" + ::= { currentGPSLatitude 3 } + +currentGPSLongitudeString OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..255)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The string used to identify current GPS Longitude" + ::= { currentGPSLongitude 1 } + +currentGPSLongitudeInt OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The current GPS Longitude, divde by 10000 to get actual value" + ::= { currentGPSLongitude 2 } + +currentGPSLongitudeFloat OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..255)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The current GPS Longitude" + ::= { currentGPSLongitude 3 } + +currentGPSAltitudeString OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..255)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The string used to identify current GPS Altitude" + ::= { currentGPSAltitude 1 } + +currentGPSAltitudeInt OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The current GPS Altitude in meters, divde by 100 to get actual value" + ::= { currentGPSAltitude 2 } + +currentGPSAltitudeFloat OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..255)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The current GPS Altitude in meters, divde by 100 to get actual value" + ::= { currentGPSAltitude 3 } + +currentGPSAltitudeFeetInt OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The current GPS Altitude in feet, divde by 100 to get actual value" + ::= { currentGPSAltitude 4 } + +currentGPSAltitudeFeetFloat OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..255)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The current GPS Altitude in feet" + ::= { currentGPSAltitude 5 } + +currentHeadingStatusString OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..255)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The string used to identify current Heading Status" + ::= { currentHeadingStatus 1 } + +currentHeadingStatusInt OBJECT-TYPE + SYNTAX INTEGER { invalid(0), valid(1) } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The current Heading Status" + ::= { currentHeadingStatus 2 } + +currentHeadingStatusValue OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..255)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The current Heading Status" + ::= { currentHeadingStatus 3 } + +currentHeadingString OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..255)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The string used to identify current Heading" + ::= { currentHeading 1 } + +currentHeadingInt OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The current heading in degrees (-180 - 180), divde by 100 to get actual value" + ::= { currentHeading 2 } + +currentHeadingFloat OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..255)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The current heading in degrees (-180 - 180)" + ::= { currentHeading 3 } + +currentHeading360ScaleInt OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The current heading in degrees (0 - 360), divde by 100 to get actual value" + ::= { currentHeading 4 } + +currentHeading360ScaleFloat OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..255)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The current heading in degrees (0 - 360)" + ::= { currentHeading 5 } + +currentPitchString OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..255)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The string used to identify current pitch" + ::= { currentPitch 1 } + +currentPitchInt OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The current pitch in degrees (-180 - 180), divde by 100 to get actual value" + ::= { currentPitch 2 } + +currentPitchFloat OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..255)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The current pitch in degrees (-180 - 180)" + ::= { currentPitch 3 } + +currentRollString OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..255)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The string used to identify current roll" + ::= { currentRoll 1 } + +currentRollInt OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The current roll in degrees (-180 - 180), divde by 100 to get actual value" + ::= { currentRoll 2 } + +currentRollFloat OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..255)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The current roll in degrees (-180 - 180)" + ::= { currentRoll 3 } + +localGPSHdgAclString OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..255)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The string used to identify local GPS/Heading/Accel" + ::= { localGPSHdgAcl 1 } + +localGPSStatusString OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..255)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The string used to identify local GPS Status" + ::= { localGPSStatus 1 } + +localGPSStatusInt OBJECT-TYPE + SYNTAX INTEGER { invalid(0), valid(1) } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The local GPS Status" + ::= { localGPSStatus 2 } + +localGPSStatusValue OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..255)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The local GPS Status" + ::= { localGPSStatus 3 } + +localGPSTimestampString OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..255)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The string used to identify local GPS Timestamp" + ::= { localGPSTimestamp 1 } + +localGPSTimestampInt OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The local GPS Timestamp, divde by 1000 to get actual value" + ::= { localGPSTimestamp 2 } + +localGPSTimestampValue OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..255)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The local GPS Timestamp" + ::= { localGPSTimestamp 3 } + +localGPSLatitudeString OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..255)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The string used to identify local GPS Latitude" + ::= { localGPSLatitude 1 } + +localGPSLatitudeInt OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The local GPS Latitude, divde by 10000 to get actual value" + ::= { localGPSLatitude 2 } + +localGPSLatitudeFloat OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..255)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The local GPS Latitude" + ::= { localGPSLatitude 3 } + +localGPSLongitudeString OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..255)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The string used to identify local GPS Longitude" + ::= { localGPSLongitude 1 } + +localGPSLongitudeInt OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The local GPS Longitude, divde by 10000 to get actual value" + ::= { localGPSLongitude 2 } + +localGPSLongitudeFloat OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..255)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The local GPS Longitude" + ::= { localGPSLongitude 3 } + +localGPSAltitudeString OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..255)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The string used to identify local GPS Altitude" + ::= { localGPSAltitude 1 } + +localGPSAltitudeInt OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The local GPS Altitude in meters, divde by 100 to get actual value" + ::= { localGPSAltitude 2 } + +localGPSAltitudeFloat OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..255)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The local GPS Altitude in meters, divde by 100 to get actual value" + ::= { localGPSAltitude 3 } + +localGPSAltitudeFeetInt OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The local GPS Altitude in feet, divde by 100 to get actual value" + ::= { localGPSAltitude 4 } + +localGPSAltitudeFeetFloat OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..255)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The local GPS Altitude in feet" + ::= { localGPSAltitude 5 } + +localHeadingStatusString OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..255)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The string used to identify local Heading Status" + ::= { localHeadingStatus 1 } + +localHeadingStatusInt OBJECT-TYPE + SYNTAX INTEGER { invalid(0), valid(1) } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The local Heading Status" + ::= { localHeadingStatus 2 } + +localHeadingStatusValue OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..255)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The local Heading Status" + ::= { localHeadingStatus 3 } + +localHeadingString OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..255)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The string used to identify local Heading" + ::= { localHeading 1 } + +localHeadingInt OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The local heading in degrees (-180 - 180), divde by 100 to get actual value" + ::= { localHeading 2 } + +localHeadingFloat OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..255)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The local heading in degrees (-180 - 180)" + ::= { localHeading 3 } + +localHeading360ScaleInt OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The local heading in degrees (0 - 360), divde by 100 to get actual value" + ::= { localHeading 4 } + +localHeading360ScaleFloat OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..255)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The local heading in degrees (0 - 360)" + ::= { localHeading 5 } + +localPitchString OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..255)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The string used to identify local pitch" + ::= { localPitch 1 } + +localPitchInt OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The local pitch in degrees (-180 - 180), divde by 100 to get actual value" + ::= { localPitch 2 } + +localPitchFloat OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..255)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The local pitch in degrees (-180 - 180)" + ::= { localPitch 3 } + +localRollString OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..255)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The string used to identify local roll" + ::= { localRoll 1 } + +localRollInt OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The local roll in degrees (-180 - 180), divde by 100 to get actual value" + ::= { localRoll 2 } + +localRollFloat OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..255)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The local roll in degrees (-180 - 180)" + ::= { localRoll 3 } + +networkGPSHdgAclString OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..255)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The string used to identify network GPS/Heading/Accel" + ::= { networkGPSHdgAcl 1 } + +networkGPSStatusString OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..255)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The string used to identify network GPS Status" + ::= { networkGPSStatus 1 } + +networkGPSStatusInt OBJECT-TYPE + SYNTAX INTEGER { invalid(0), valid(1) } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The network GPS Status" + ::= { networkGPSStatus 2 } + +networkGPSStatusValue OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..255)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The network GPS Status" + ::= { networkGPSStatus 3 } + +networkGPSTimestampString OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..255)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The string used to identify network GPS Timestamp" + ::= { networkGPSTimestamp 1 } + +networkGPSTimestampInt OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The network GPS Timestamp, divde by 1000 to get actual value" + ::= { networkGPSTimestamp 2 } + +networkGPSTimestampValue OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..255)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The network GPS Timestamp" + ::= { networkGPSTimestamp 3 } + +networkGPSLatitudeString OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..255)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The string used to identify network GPS Latitude" + ::= { networkGPSLatitude 1 } + +networkGPSLatitudeInt OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The network GPS Latitude, divde by 10000 to get actual value" + ::= { networkGPSLatitude 2 } + +networkGPSLatitudeFloat OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..255)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The network GPS Latitude" + ::= { networkGPSLatitude 3 } + +networkGPSLongitudeString OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..255)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The string used to identify network GPS Longitude" + ::= { networkGPSLongitude 1 } + +networkGPSLongitudeInt OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The network GPS Longitude, divde by 10000 to get actual value" + ::= { networkGPSLongitude 2 } + +networkGPSLongitudeFloat OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..255)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The network GPS Longitude" + ::= { networkGPSLongitude 3 } + +networkGPSAltitudeString OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..255)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The string used to identify network GPS Altitude" + ::= { networkGPSAltitude 1 } + +networkGPSAltitudeInt OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The network GPS Altitude in meters, divde by 100 to get actual value" + ::= { networkGPSAltitude 2 } + +networkGPSAltitudeFloat OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..255)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The network GPS Altitude in meters, divde by 100 to get actual value" + ::= { networkGPSAltitude 3 } + +networkGPSAltitudeFeetInt OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The network GPS Altitude in feet, divde by 100 to get actual value" + ::= { networkGPSAltitude 4 } + +networkGPSAltitudeFeetFloat OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..255)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The network GPS Altitude in feet" + ::= { networkGPSAltitude 5 } + +networkHeadingStatusString OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..255)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The string used to identify network Heading Status" + ::= { networkHeadingStatus 1 } + +networkHeadingStatusInt OBJECT-TYPE + SYNTAX INTEGER { invalid(0), valid(1) } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The network Heading Status" + ::= { networkHeadingStatus 2 } + +networkHeadingStatusValue OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..255)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The network Heading Status" + ::= { networkHeadingStatus 3 } + +networkHeadingString OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..255)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The string used to identify network Heading" + ::= { networkHeading 1 } + +networkHeadingInt OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The network heading in degrees (-180 - 180), divde by 100 to get actual value" + ::= { networkHeading 2 } + +networkHeadingFloat OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..255)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The network heading in degrees (-180 - 180)" + ::= { networkHeading 3 } + +networkHeading360ScaleInt OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The network heading in degrees (0 - 360), divde by 100 to get actual value" + ::= { networkHeading 4 } + +networkHeading360ScaleFloat OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..255)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The network heading in degrees (0 - 360)" + ::= { networkHeading 5 } + +networkPitchString OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..255)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The string used to identify network pitch" + ::= { networkPitch 1 } + +networkPitchInt OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The network pitch in degrees (-180 - 180), divde by 100 to get actual value" + ::= { networkPitch 2 } + +networkPitchFloat OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..255)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The network pitch in degrees (-180 - 180)" + ::= { networkPitch 3 } + +networkRollString OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..255)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The string used to identify network roll" + ::= { networkRoll 1 } + +networkRollInt OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The network roll in degrees (-180 - 180), divde by 100 to get actual value" + ::= { networkRoll 2 } + +networkRollFloat OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..255)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The network roll in degrees (-180 - 180)" + ::= { networkRoll 3 } + + +-- conformance information + +aatsMIBConformance OBJECT IDENTIFIER ::= { aats 97 } +aatsMIBCompliances OBJECT IDENTIFIER ::= { aatsMIBConformance 1 } +aatsMIBGroups OBJECT IDENTIFIER ::= { aatsMIBConformance 2 } + +-- compliance statements +aatsBasicCompliance MODULE-COMPLIANCE + STATUS current + DESCRIPTION + "The compliance statement for the AATS MIB" + MODULE -- this module + MANDATORY-GROUPS { aatsSnmpGroup } + + GROUP aatsSnmpGroup + DESCRIPTION + "The aats object groups." + + ::= { aatsMIBCompliances 2 } + +-- units of conformance +aatsSnmpGroup OBJECT-GROUP + OBJECTS { + status, + active, + stowed, + cpuTemp, + radioName, + radioConnected, + linkStatusString, + linkStatusInt, + linkStatusVal, + rssiString, + rssiInt, + rssiFloat, + snrString, + snrInt, + snrFloat, + linkDistanceString, + linkDistanceMeters, + linkDistanceMiles, + remoteString, + remoteIP, + remoteMAC, + positionerConnected, + positionerMoving, + azimuthString, + azimuthInt, + azimuthFloat, + azimuth360ScaleInt, + azimuth360ScaleFloat, + elevationString, + elevationInt, + elevationFloat, + antennaHeadingString, + antennaHeadingInt, + antennaHeadingFloat, + antennaHeading360ScaleInt, + antennaHeading360ScaleFloat, + currentGPSHdgAclString, + currentGPSStatusString, + currentGPSStatusInt, + currentGPSStatusValue, + currentGPSTimestampString, + currentGPSTimestampInt, + currentGPSTimestampValue, + currentGPSLatitudeString, + currentGPSLatitudeInt, + currentGPSLatitudeFloat, + currentGPSLongitudeString, + currentGPSLongitudeInt, + currentGPSLongitudeFloat, + currentGPSAltitudeString, + currentGPSAltitudeInt, + currentGPSAltitudeFloat, + currentGPSAltitudeFeetInt, + currentGPSAltitudeFeetFloat, + currentHeadingStatusString, + currentHeadingStatusInt, + currentHeadingStatusValue, + currentHeadingString, + currentHeadingInt, + currentHeadingFloat, + currentHeading360ScaleInt, + currentHeading360ScaleFloat, + currentPitchString, + currentPitchInt, + currentPitchFloat, + currentRollString, + currentRollInt, + currentRollFloat, + localGPSHdgAclString, + localGPSStatusString, + localGPSStatusInt, + localGPSStatusValue, + localGPSTimestampString, + localGPSTimestampInt, + localGPSTimestampValue, + localGPSLatitudeString, + localGPSLatitudeInt, + localGPSLatitudeFloat, + localGPSLongitudeString, + localGPSLongitudeInt, + localGPSLongitudeFloat, + localGPSAltitudeString, + localGPSAltitudeInt, + localGPSAltitudeFloat, + localGPSAltitudeFeetInt, + localGPSAltitudeFeetFloat, + localHeadingStatusString, + localHeadingStatusInt, + localHeadingStatusValue, + localHeadingString, + localHeadingInt, + localHeadingFloat, + localHeading360ScaleInt, + localHeading360ScaleFloat, + localPitchString, + localPitchInt, + localPitchFloat, + localRollString, + localRollInt, + localRollFloat, + networkGPSHdgAclString, + networkGPSStatusString, + networkGPSStatusInt, + networkGPSStatusValue, + networkGPSTimestampString, + networkGPSTimestampInt, + networkGPSTimestampValue, + networkGPSLatitudeString, + networkGPSLatitudeInt, + networkGPSLatitudeFloat, + networkGPSLongitudeString, + networkGPSLongitudeInt, + networkGPSLongitudeFloat, + networkGPSAltitudeString, + networkGPSAltitudeInt, + networkGPSAltitudeFloat, + networkGPSAltitudeFeetInt, + networkGPSAltitudeFeetFloat, + networkHeadingStatusString, + networkHeadingStatusInt, + networkHeadingStatusValue, + networkHeadingString, + networkHeadingInt, + networkHeadingFloat, + networkHeading360ScaleInt, + networkHeading360ScaleFloat, + networkPitchString, + networkPitchInt, + networkPitchFloat, + networkRollString, + networkRollInt, + networkRollFloat +} + STATUS current + DESCRIPTION + "The aats object group" + ::= { aatsMIBGroups 8 } +END + |