diff options
Diffstat (limited to 'MIBS/awplus/AT-SWITCH-MIB')
| -rw-r--r-- | MIBS/awplus/AT-SWITCH-MIB | 714 |
1 files changed, 714 insertions, 0 deletions
diff --git a/MIBS/awplus/AT-SWITCH-MIB b/MIBS/awplus/AT-SWITCH-MIB new file mode 100644 index 0000000..61c2922 --- /dev/null +++ b/MIBS/awplus/AT-SWITCH-MIB @@ -0,0 +1,714 @@ +-- ============================================================================ +-- AT-SWI.MIB +-- Allied Telesis enterprise MIB +-- For AlliedWare Plus (tm) operating system +-- +-- Copyright (c) 2006 by Allied Telesis, Inc. +-- All rights reserved. +-- +-- ============================================================================ + + +AT-SWITCH-MIB DEFINITIONS ::= BEGIN + +IMPORTS + MODULE-IDENTITY, + OBJECT-TYPE, + NOTIFICATION-TYPE, + Counter32 + FROM SNMPv2-SMI + + DisplayString + FROM SNMPv2-TC + + modules + FROM AT-SMI-MIB +; + +swi MODULE-IDENTITY + LAST-UPDATED "200606121222Z" + ORGANIZATION "Allied Telesis, Inc" + CONTACT-INFO + "http://www.alliedtelesis.com" + DESCRIPTION + "This MIB file contains definitions of managed objects for the + SWITCH module. " + + REVISION "200606121222Z" +DESCRIPTION + "Initial Revision" + +::= { modules 87} + + +-- The branch is named 'swi' because it is the common internal module name, +-- also to reduce the chance of naming conflicts with other MIB objects. + +swiPortTable OBJECT-TYPE + SYNTAX SEQUENCE OF SwiPortEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Table of port properties." + ::= { swi 1 } + +swiPortEntry OBJECT-TYPE + SYNTAX SwiPortEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in the port information table." + INDEX { swiPortNumber } + ::= { swiPortTable 1 } + +SwiPortEntry ::= + SEQUENCE { + swiPortNumber + INTEGER, + swiPortIngressLimit + INTEGER, + swiPortEgressLimit + INTEGER + } + +swiPortNumber OBJECT-TYPE + SYNTAX INTEGER (1..65535) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object identifies the port of the switch." + ::= { swiPortEntry 1 } + + +swiPortIngressLimit OBJECT-TYPE + SYNTAX INTEGER (1..2147483647) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The Ingress Bandwidth Limit applied to the port. A value of + zero indicates that no limit is set." + ::= { swiPortEntry 20 } + +swiPortEgressLimit OBJECT-TYPE + SYNTAX INTEGER (1..2147483647) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The Egress Bandwidth Limit applied to the port. A value of + zero indicates that no limit is set." + ::= { swiPortEntry 21 } + +swiPortVlanTable OBJECT-TYPE + SYNTAX SEQUENCE OF SwiPortVlanEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Table of port vlan properties." + ::= { swi 4 } + +swiPortVlanEntry OBJECT-TYPE + SYNTAX SwiPortVlanEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry of vlan in the port information table." + INDEX { swiPortVlanPortNumber, swiPortVlanVlanId } + ::= { swiPortVlanTable 1 } + +SwiPortVlanEntry ::= + SEQUENCE { + swiPortVlanPortNumber + INTEGER, + swiPortVlanVlanId + INTEGER, + swiPortVlanControl + INTEGER + } + +swiPortVlanPortNumber OBJECT-TYPE + SYNTAX INTEGER (1..65535) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object identifies the port of the switch." + ::= { swiPortVlanEntry 1 } + +swiPortVlanVlanId OBJECT-TYPE + SYNTAX INTEGER (1..65535) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object identifies the vlans that a port attached to " + ::= { swiPortVlanEntry 2 } + +swiPortVlanControl OBJECT-TYPE + SYNTAX INTEGER { + enable (1), + disable (2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The writting to this object enables or disable the port in a vlan. + The reading of this object indicates the port state in a vlan. " + ::= { swiPortVlanEntry 3 } + +swiPortVlanStateNotify NOTIFICATION-TYPE + OBJECTS {swiPortVlanPortNumber, swiPortVlanVlanId, swiPortVlanControl} + STATUS current + DESCRIPTION + "This objects informs a state change of a port in vlan." + ::= { swi 9 } + +-- The following table lists the various switch port counters for the +-- swi56xx based products. + +swi56xxPortCounterTable OBJECT-TYPE + SYNTAX SEQUENCE OF Swi56xxPortCounterEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Table of swi56xx port counter properties." + ::= { swi 2 } + +swi56xxPortCounterEntry OBJECT-TYPE + SYNTAX Swi56xxPortCounterEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in the port information table." + INDEX { swi56xxPortNumber } + ::= { swi56xxPortCounterTable 1 } + +Swi56xxPortCounterEntry ::= + SEQUENCE { + swi56xxPortNumber + INTEGER, + swi56xxRxTx64kPkts + Counter32, + swi56xxRxTx65To127kPkts + Counter32, + swi56xxRxTx128To255kPkts + Counter32, + swi56xxRxTx256To511kPkts + Counter32, + swi56xxRxTx512To1023kPkts + Counter32, + swi56xxRxTx1024ToMaxPktSzPkts + Counter32, + swi56xxRxTx519To1522kPkts + Counter32, + swi56xxPortRxOctets + Counter32, + swi56xxPortRxPkts + Counter32, + swi56xxPortRxFCSErrors + Counter32, + swi56xxPortRxMulticastPkts + Counter32, + swi56xxPortRxBroadcastPkts + Counter32, + swi56xxPortRxPauseMACCtlFrms + Counter32, + swi56xxPortRxOversizePkts + Counter32, + swi56xxPortRxFragments + Counter32, + swi56xxPortRxJabbers + Counter32, + swi56xxPortRxMACControlFrms + Counter32, + swi56xxPortRxUnsupportOpcode + Counter32, + swi56xxPortRxAlignmentErrors + Counter32, + swi56xxPortRxOutOfRngeLenFld + Counter32, + swi56xxPortRxSymErDurCarrier + Counter32, + swi56xxPortRxCarrierSenseErr + Counter32, + swi56xxPortRxUndersizePkts + Counter32, + swi56xxPortRxIpInHdrErrors + Counter32, + swi56xxPortTxOctets + Counter32, + swi56xxPortTxPkts + Counter32, + swi56xxPortTxFCSErrors + Counter32, + swi56xxPortTxMulticastPkts + Counter32, + swi56xxPortTxBroadcastPkts + Counter32, + swi56xxPortTxPauseMACCtlFrms + Counter32, + swi56xxPortTxOversizePkts + Counter32, + swi56xxPortTxFragments + Counter32, + swi56xxPortTxJabbers + Counter32, + swi56xxPortTxPauseCtrlFrms + Counter32, + swi56xxPortTxFrameWDeferrdTx + Counter32, + swi56xxPortTxFrmWExcesDefer + Counter32, + swi56xxPortTxSingleCollsnFrm + Counter32, + swi56xxPortTxMultCollsnFrm + Counter32, + swi56xxPortTxLateCollsns + Counter32, + swi56xxPortTxExcessivCollsns + Counter32, + swi56xxPortTxCollisionFrames + Counter32, + swi56xxPortMiscDropEvents + Counter32, + swi56xxPortMiscTaggedPktTx + Counter32, + swi56xxPortMiscTotalPktTxAbort + Counter32, + swi56xxPortHWMultiTTLexpired + Counter32, + swi56xxPortHWMultiBridgedFrames + Counter32, + swi56xxPortHWMultiRxDrops + Counter32, + swi56xxPortHWMultiTxDrops + Counter32 + } + +swi56xxPortNumber OBJECT-TYPE + SYNTAX INTEGER (1..65535) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object identifies the port of the switch." + ::= { swi56xxPortCounterEntry 1 } + +swi56xxRxTx64kPkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of 64kB packets received and transmitted." + ::= { swi56xxPortCounterEntry 2 } + +swi56xxRxTx65To127kPkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of 65kB To 127kB packets received and transmitted." + ::= { swi56xxPortCounterEntry 3 } + +swi56xxRxTx128To255kPkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of 128kB To 255kB packets received and transmitted." + ::= { swi56xxPortCounterEntry 4 } + +swi56xxRxTx256To511kPkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of 256kB To 511kB packets received and transmitted." + ::= { swi56xxPortCounterEntry 5 } + +swi56xxRxTx512To1023kPkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of 512kB To 1023kB packets received and transmitted." + ::= { swi56xxPortCounterEntry 6 } + +swi56xxRxTx1024ToMaxPktSzPkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of 1024kB To MaxPktSz packets received and transmitted." + ::= { swi56xxPortCounterEntry 7 } + +swi56xxRxTx519To1522kPkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of 519kB To 1522kB packets received and transmitted." + ::= { swi56xxPortCounterEntry 8 } + +swi56xxPortRxOctets OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of octets received." + ::= { swi56xxPortCounterEntry 9 } + +swi56xxPortRxPkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of packets received." + ::= { swi56xxPortCounterEntry 10 } + +swi56xxPortRxFCSErrors OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of frames received containing a Frame Check Sequence + error." + ::= { swi56xxPortCounterEntry 11 } + +swi56xxPortRxMulticastPkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of multicast packets received." + ::= { swi56xxPortCounterEntry 12 } + +swi56xxPortRxBroadcastPkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of broadcast packets received." + ::= { swi56xxPortCounterEntry 13 } + +swi56xxPortRxPauseMACCtlFrms OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of valid PAUSE MAC Control frames received." + ::= { swi56xxPortCounterEntry 14 } + +swi56xxPortRxOversizePkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of oversize packets received." + ::= { swi56xxPortCounterEntry 15 } + +swi56xxPortRxFragments OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of fragments received." + ::= { swi56xxPortCounterEntry 16 } + +swi56xxPortRxJabbers OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of jabber frames received." + ::= { swi56xxPortCounterEntry 17 } + +swi56xxPortRxMACControlFrms OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of MAC Control frames (Pause and + Unsupported) received." + ::= { swi56xxPortCounterEntry 18 } + +swi56xxPortRxUnsupportOpcode OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of MAC Control frames with unsupported + opcode (i.e. not Pause) received." + ::= { swi56xxPortCounterEntry 19 } + +swi56xxPortRxAlignmentErrors OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of frames with alignment errors received." + ::= { swi56xxPortCounterEntry 20 } + +swi56xxPortRxOutOfRngeLenFld OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of packets with length out of range received." + ::= { swi56xxPortCounterEntry 21 } + +swi56xxPortRxSymErDurCarrier OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of frames with invalid data symbols received." + ::= { swi56xxPortCounterEntry 22 } + +swi56xxPortRxCarrierSenseErr OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of false carrier conditions between frames received." + ::= { swi56xxPortCounterEntry 23 } + +swi56xxPortRxUndersizePkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of undersized packets received." + ::= { swi56xxPortCounterEntry 24 } + +swi56xxPortRxIpInHdrErrors OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "swiPortRxIpInHdrErrors" + ::= { swi56xxPortCounterEntry 25 } + +swi56xxPortTxOctets OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of octets transmitted." + ::= { swi56xxPortCounterEntry 26 } + +swi56xxPortTxPkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of packets transmitted." + ::= { swi56xxPortCounterEntry 27 } + +swi56xxPortTxFCSErrors OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of frames containing a Frame Check Sequence + error transmitted." + ::= { swi56xxPortCounterEntry 28 } + +swi56xxPortTxMulticastPkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of multicast packets transmitted." + ::= { swi56xxPortCounterEntry 29 } + +swi56xxPortTxBroadcastPkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of broadcast packets transmitted." + ::= { swi56xxPortCounterEntry 30 } + +swi56xxPortTxPauseMACCtlFrms OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of valid PAUSE MAC Control frames transmitted." + ::= { swi56xxPortCounterEntry 31 } + +swi56xxPortTxOversizePkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of oversize packets transmitted." + ::= { swi56xxPortCounterEntry 32 } + +swi56xxPortTxFragments OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of fragments transmitted." + ::= { swi56xxPortCounterEntry 33 } + +swi56xxPortTxJabbers OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of jabber frames transmitted." + ::= { swi56xxPortCounterEntry 34 } + +swi56xxPortTxPauseCtrlFrms OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of Pause control frames transmitted." + ::= { swi56xxPortCounterEntry 35 } + +swi56xxPortTxFrameWDeferrdTx OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of frames deferred once before successful + transmission." + ::= { swi56xxPortCounterEntry 36 } + +swi56xxPortTxFrmWExcesDefer OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of frame aborted after too many deferrals." + ::= { swi56xxPortCounterEntry 37 } + +swi56xxPortTxSingleCollsnFrm OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of frames which experienced exactly one + collision." + ::= { swi56xxPortCounterEntry 38 } + +swi56xxPortTxMultCollsnFrm OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of frames which experienced 2 to 15 collisions + (including late collisions)." + ::= { swi56xxPortCounterEntry 39 } + +swi56xxPortTxLateCollsns OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of frames which experienced late collisions." + ::= { swi56xxPortCounterEntry 40 } + +swi56xxPortTxExcessivCollsns OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of frames aborted before transmission after 16 + collisions." + ::= { swi56xxPortCounterEntry 41 } + +swi56xxPortTxCollisionFrames OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of collisions." + ::= { swi56xxPortCounterEntry 42 } + +swi56xxPortMiscDropEvents OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of packets discarded at ingress port." + ::= { swi56xxPortCounterEntry 43 } + +swi56xxPortMiscTaggedPktTx OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of VLAN tagged packets transmitted." + ::= { swi56xxPortCounterEntry 44 } + +swi56xxPortMiscTotalPktTxAbort OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of Layer 2 and 3 packets aborted during + transmission." + ::= { swi56xxPortCounterEntry 45 } + +swi56xxPortHWMultiTTLexpired OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of multicast TTL expired frames." + ::= { swi56xxPortCounterEntry 46 } + +swi56xxPortHWMultiBridgedFrames OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of multicast bridged frames" + ::= { swi56xxPortCounterEntry 47 } + +swi56xxPortHWMultiRxDrops OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of multicast frames dropped at reception" + ::= { swi56xxPortCounterEntry 48 } + +swi56xxPortHWMultiTxDrops OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "NNumber of multicast frames dropped at transmission" + ::= { swi56xxPortCounterEntry 49 } + + +-- A MIB group set up to contain odds and ends of debugging variables in the SWI module. + +swiDebugVariables OBJECT IDENTIFIER ::= { swi 3 } +swiTrap OBJECT IDENTIFIER ::= { swi 0 } + +swiDebugMemoryParityErrors OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "For switches based on certain switch chips, the number of parity errors + that have been detected in packet memory associated with the switch. If the + device does not include the counting of memory parity errors, this variable + will return 0." + ::= { swiDebugVariables 1 } + +swiIntrusionDetectionTrap NOTIFICATION-TYPE + OBJECTS { swiPortNumber } + STATUS current + DESCRIPTION + "An intrusion detection trap is generated when a port has intrusion + detection enabled, and the action taken when intrusion is detected is + to generate a trap. Intrusion is detected when the number of MAC + addresses learned on the port exceeds the configured learn limit. + The ifIndex of the port is included in the trap." + ::= { swiTrap 6 } + +END |