diff options
Diffstat (limited to 'MIBS/audiocodes/AcPerfH323SIPGateway')
| -rw-r--r-- | MIBS/audiocodes/AcPerfH323SIPGateway | 347 |
1 files changed, 347 insertions, 0 deletions
diff --git a/MIBS/audiocodes/AcPerfH323SIPGateway b/MIBS/audiocodes/AcPerfH323SIPGateway new file mode 100644 index 0000000..ccebb5c --- /dev/null +++ b/MIBS/audiocodes/AcPerfH323SIPGateway @@ -0,0 +1,347 @@ +
+AcPerfH323SIPGateway DEFINITIONS ::= BEGIN
+
+
+ IMPORTS
+
+ OBJECT-TYPE,
+ MODULE-IDENTITY FROM SNMPv2-SMI
+ enterprises FROM SNMPv2-SMI;
+
+ audioCodes OBJECT IDENTIFIER ::= {enterprises 5003}
+ acRegistrations OBJECT IDENTIFIER ::= {audioCodes 7}
+ acGeneric OBJECT IDENTIFIER ::= {audioCodes 8}
+ acProducts OBJECT IDENTIFIER ::= {audioCodes 9}
+ acPerformance OBJECT IDENTIFIER ::= {audioCodes 10}
+
+
+acPerfH323SIPGateway MODULE-IDENTITY
+ LAST-UPDATED "200511031451Z" --Thursday, November 03, 2005
+ ORGANIZATION "AudioCodes Ltd"
+ CONTACT-INFO
+ "Postal: AudioCodes LTD
+ 4 Horesh Road
+ Yehud 56470, ISRAEL
+ Tel: 972-3-5394000
+ Email: support@audiocodes.com"
+
+
+ DESCRIPTION
+ "This MIB defines the enterprise-specific objects needed
+ to support performance management of the AudioCodes product.
+ Performance measurements are grouped into the following MIB trees:
+
+ acPerfIvr - performance measurements related to the IVR service
+ acPerfBct - performance measurements related to the BCT service
+ acPerfConf - performance measurements related to the Conferencing service
+ acPerfTt - performance measurements related to the Test Trunk service"
+
+
+ REVISION "200311200000Z"
+ DESCRIPTION
+ "Version 4.4. November 20, 2003. Made these changes:
+ o Initial revision"
+
+ ::= {acPerformance 3}
+
+--
+-- Abbreviations used:
+-- Annc announcement(s)
+-- IVR Interactive Voice Response
+-- Conf Conferencing
+-- NE network element
+-- TT Test Trunks
+--
+
+-- The following conventions are used in this MIB:
+
+-- The "Product" attribute lists the products in which the
+-- performance measurement is maintained. Current products
+-- are:
+--
+-- Media Servers
+-- IPmedia 2000
+-- Media Gateways
+-- Mediant 2000/5000/8000 (wireline)
+-- Stretto 2000/5000/8000 (wireless)
+--
+
+-- The "Capabilities" attribute lists the capabilities that must be
+-- configured on the system for the performance measurement to be
+-- maintained. The possible values are IVR, Conferencing, BCT, TT
+-- and Trunking Gateway. Some performance measurements are not
+-- related to any particular capabilities. In those cases, the value
+-- of Capabilities attribute is "All".
+
+--
+-- Notes on IVR Service Performance Measurements
+--
+
+-- In response to a request to play an announcement, the media server
+-- may play multiple audio segments. The media server maintains
+-- performance data for the overall announcement request as well as
+-- for the individual segments.
+
+-- In naming of the performance measurements, "Play" is used to refer
+-- to the overall announcement request. "PlaySegment" is used to refer
+-- to the playing of an individual segment.
+
+--
+-- Notes on Play Collect
+--
+
+-- Play Collect involves playing of an initial prompt, collection of digits, followed
+-- by actions which are dependent on the digits (or lack of digits) that are collected.
+-- These are the prompts that can be specified (all are optional):
+--
+-- ip initial prompt
+-- nd no digits reprompt (if not specified, use rp)
+-- rp reprompt (if not specified, use ip)
+-- fa failure, played once at end
+-- sa success, played once at end
+--
+-- The request can specify the number of attempts, before playing the fa prompt. If no
+-- number of attempts value is supplied on the request, then a default is used.
+--
+-- The prompts can be either simple or complex announcements.
+--
+-- Continuous Digit Collect operations, which can be considered a special type of play
+-- collect, are not tracked by any of the acPlayCollect performance measurements,
+-- but are instead tracked in a special group of performance measurements.
+
+--
+-- Notes on Continuous Digit Collect
+--
+
+-- Continuous Digit Collect - Digits are collected during the entire
+-- life of a call. No prompts are played. Continuous Digit Collect
+-- is typically used in a BCT call.
+--
+-- Continuous Digit Collect operations can be considered a special type of play
+-- collect, but are not tracked by any of the acPlayCollect performance measurements.
+
+
+
+
+
+
+
+
+
+
+
+ acPerfH323SIPGWCommon OBJECT IDENTIFIER ::= {acPerfH323SIPGateway 1}
+
+
+ acPerfH323SIPGWCalls OBJECT IDENTIFIER ::= {acPerfH323SIPGWCommon 1}
+
+
+ acPerfTel2IP OBJECT IDENTIFIER ::= {acPerfH323SIPGWCalls 1}
+
+
+ acPerfTel2IPAttemptedCalls OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of Attempted SIP/H323 calls."
+ ::= {acPerfTel2IP 1}
+
+
+
+ acPerfTel2IPEstablishedCalls OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of established (connected and voice activated) SIP/H323 calls."
+ ::= {acPerfTel2IP 2}
+
+
+
+ acPerfTel2IPBusyCalls OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of Destination Busy SIP/H323 calls."
+ ::= {acPerfTel2IP 3}
+
+
+
+ acPerfTel2IPNoAnswerCalls OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of No Answer SIP/H323 calls."
+ ::= {acPerfTel2IP 4}
+
+
+
+ acPerfTel2IPNoRouteCalls OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of No Route SIP/H323 calls. Most likely to be due to wrong number."
+ ::= {acPerfTel2IP 5}
+
+
+
+ acPerfTel2IPNoMatchCalls OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of No capability match between peers on SIP/H323 calls."
+ ::= {acPerfTel2IP 6}
+
+
+
+ acPerfTel2IPFailCalls OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of fax attempted SIP/H323 calls."
+ ::= {acPerfTel2IP 7}
+
+
+
+ acPerfTel2IPFaxAttemptedCalls OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of Attempted SIP/H323 calls."
+ ::= {acPerfTel2IP 8}
+
+
+
+ acPerfTel2IPFaxSuccessCalls OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of Attempted SIP/H323 fax success calls."
+ ::= {acPerfTel2IP 9}
+
+
+
+ acPerfTel2IPTotalDuration OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "total duration of SIP/H323 calls."
+ ::= {acPerfTel2IP 10}
+
+
+
+ acPerfIP2Tel OBJECT IDENTIFIER ::= {acPerfH323SIPGWCalls 2}
+
+
+ acPerfIP2TelAttemptedCalls OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of Attempted SIP/H323 calls."
+ ::= {acPerfIP2Tel 1}
+
+
+
+ acPerfIP2TelEstablishedCalls OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of established (connected and voice activated) SIP/H323 calls."
+ ::= {acPerfIP2Tel 2}
+
+
+
+ acPerfIP2TelBusyCalls OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of Destination Busy SIP/H323 calls."
+ ::= {acPerfIP2Tel 3}
+
+
+
+ acPerfIP2TelNoAnswerCalls OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of No Answer SIP/H323 calls."
+ ::= {acPerfIP2Tel 4}
+
+
+
+ acPerfIP2TelNoRouteCalls OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of No Route SIP/H323 calls. Most likely to be due to wrong number."
+ ::= {acPerfIP2Tel 5}
+
+
+
+ acPerfIP2TelNoMatchCalls OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of No capability match between peers on SIP/H323 calls."
+ ::= {acPerfIP2Tel 6}
+
+
+
+ acPerfIP2TelFailCalls OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of fax attempted SIP/H323 calls."
+ ::= {acPerfIP2Tel 7}
+
+
+
+ acPerfIP2TelFaxAttemptedCalls OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of Attempted SIP/H323 calls."
+ ::= {acPerfIP2Tel 8}
+
+
+
+ acPerfIP2TelFaxSuccessCalls OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of Attempted SIP/H323 fax success calls."
+ ::= {acPerfIP2Tel 9}
+
+
+
+ acPerfIP2TelTotalDuration OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "total duration of SIP/H323 calls."
+ ::= {acPerfIP2Tel 10}
+
+
+
+
+
+END
|