diff options
Diffstat (limited to 'MIBS/audiocodes/AC-SYSTEM-MIB')
| -rw-r--r-- | MIBS/audiocodes/AC-SYSTEM-MIB | 12300 |
1 files changed, 12300 insertions, 0 deletions
diff --git a/MIBS/audiocodes/AC-SYSTEM-MIB b/MIBS/audiocodes/AC-SYSTEM-MIB new file mode 100644 index 0000000..39dd735 --- /dev/null +++ b/MIBS/audiocodes/AC-SYSTEM-MIB @@ -0,0 +1,12300 @@ +
+AC-SYSTEM-MIB DEFINITIONS ::= BEGIN
+
+
+ IMPORTS
+
+
+ OBJECT-TYPE,
+ MODULE-IDENTITY FROM SNMPv2-SMI
+ TAddress,
+ DisplayString,
+ DateAndTime, TEXTUAL-CONVENTION FROM SNMPv2-TC
+ IpAddress FROM RFC1155-SMI
+ RowPointer FROM SNMPv2-TC
+ Unsigned32,
+ Integer32,
+ enterprises FROM SNMPv2-SMI
+ RowStatus FROM SNMPv2-TC
+ SnmpAdminString FROM SNMP-FRAMEWORK-MIB
+ audioCodes,
+ acRegistrations,
+ acGeneric,
+ acProducts,acBoardMibs FROM AUDIOCODES-TYPES-MIB
+ InetAddress, InetAddressType FROM INET-ADDRESS-MIB;
+
+
+acSystem MODULE-IDENTITY
+ LAST-UPDATED "201408200359Z" --Wednesday, August 20 2014
+ ORGANIZATION "AudioCodes Ltd"
+ CONTACT-INFO
+ "Postal: Support
+ AudioCodes LTD
+ 1 Hayarden Street
+ Airport City
+ Lod, ISRAEL 70151
+ Tel: 972-3-9764000
+ Fax: 972-3-9764040
+ Email: support@audiocodes.com
+ Web: www.audiocodes.com"
+
+ DESCRIPTION
+ ""
+
+
+
+ ::= {acBoardMibs 10}
+
+
+
+
+
+
+
+
+ acSystemConfiguration OBJECT IDENTIFIER ::= {acSystem 1}
+
+
+ acSysControl OBJECT IDENTIFIER ::= {acSystemConfiguration 1}
+
+
+ acSysControlProtocolType OBJECT-TYPE
+ SYNTAX INTEGER {
+ controlProtocol-None(0)
+,
+ controlProtocol-MGCP(1)
+,
+ controlProtocol-MEGACO(2)
+,
+ controlProtocol-H323(4)
+,
+ controlProtocol-SIP(8)
+
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Defines the control protocol type.
+Choose either:
+0 = None
+1 = MGCP
+2 = MEGACO
+4 = H.323
+8 = SIP.
+Access: Offline.
+AC INI-Param: MGCONTROLPROTOCOLTYPE"
+ ::= {acSysControl 1}
+
+
+
+ acSysControlTrunkingToAnalogFunctionalityProfile OBJECT-TYPE
+ SYNTAX INTEGER {
+ disable(0)
+,
+ cASAnalog(1)
+
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This parameter defines the Trunking to Analog Functionality
+Profile.
+0 = Disable
+1 = Enable MelCAS/LoopStart/GroundStart to Analog Functionality
+Refer to the enumerator acTrunkingToAnalogFunctionalityProfile
+enum for the possible values.
+Access: Offline.
+AC INI-Param: TrunkingToAnalogFunctionalityProfile"
+ ::= {acSysControl 2}
+
+
+
+ acSysTDM OBJECT IDENTIFIER ::= {acSystemConfiguration 2}
+
+
+ acSysTDMClock OBJECT IDENTIFIER ::= {acSysTDM 1}
+
+
+ acSysTDMClockSource OBJECT-TYPE
+ SYNTAX INTEGER {
+ internal(1)
+,
+ mVIP(3)
+,
+ network(4)
+,
+ h110-A(8)
+,
+ h110-B(9)
+,
+ netReference1(10)
+,
+ netReference2(11)
+,
+ sC-2M(12)
+,
+ sC-4M(13)
+,
+ sC-8M(14)
+,
+ bITS(15)
+,
+ network-b(16)
+,
+ aTM-OC3(17)
+,
+ aTM-OC3-B(18)
+,
+ aTM-OC12(19)
+,
+ network-DS3-1(20)
+,
+ network-DS3-2(21)
+,
+ network-DS3-3(22)
+
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Selects the clock source on which the board synchronizes.
+1 = Local oscillator
+3 = MVIP
+4 = PSTN Network
+8 = H.110A
+9 = H.110B
+10 = NetRef1
+11 = NetRef2
+12 = SC2M
+13 = SC4M
+14 = SC8M
+15 = BITS
+16 = Network-B
+17 = ATM-OC3
+18 = ATM-OC3-B
+19 = ATM-OC12
+20 = Network-DS3-1
+21 = Network-DS3-2
+22 = Network-DS3-3
+Default = 1
+TP-1610 = 3
+
+The Paramater is online for TP6310 and TP8410 . For all other
+boards, the parameter is offline.
+Access: Online.
+AC INI-Param: TDMBUSCLOCKSOURCE"
+ ::= {acSysTDMClock 1}
+
+
+
+ acSysTDMClockEnableFallBack OBJECT-TYPE
+ SYNTAX INTEGER {
+ manual(0)
+,
+ autoNon-Revertive(1)
+,
+ auto-Revertive(2)
+
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Defines the auto fallback of the clock.
+Range:
+0 = Manual
+1 = Auto Non-Revertive
+2 = Auto Revertive.
+Access: Online.
+AC INI-Param: TDMBUSENABLEFALLBACK"
+ ::= {acSysTDMClock 2}
+
+
+
+ acSysTDMClockLocalReference OBJECT-TYPE
+ SYNTAX Unsigned32 (0..256)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "When the clock source is set to Network, this parameter selects
+the Trunk ID to be used as the clock synchronization source
+of the board.
+When using H.110/H.100 bus, this parameter also selects the
+trunk used as the clock source for the NetRef clock generation
+(in this case, the clock source must not be set to Network.
+Range = 0 to (MAX_TRUNK _NUM-1).
+Access: Online.
+AC INI-Param: TDMBusLocalReference"
+ ::= {acSysTDMClock 3}
+
+
+
+ acSysTDMClockMasterSlaveSelection OBJECT-TYPE
+ SYNTAX INTEGER {
+ acTDMBusSlaveMode(0)
+,
+ acTDMBusMasterMode(1)
+,
+ acH110BusSecondaryMasterMode(2)
+
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Sets SC/MVIP/H.100/H.110 to either:
+
+0 = Slave mode (another board in the system must supply the
+clock to the TDM bus) or Master mode (the board is the clock
+source for the TDM bus) or Secondary Master mode (for H100/H110
+Bus only).
+1 = H110A Master in Master mode
+2 = H.110B Master.
+Access: Online.
+AC INI-Param: TDMBUSMASTERSLAVESELECTION"
+ ::= {acSysTDMClock 4}
+
+
+
+ acSysTDMClockNetRefSpeed OBJECT-TYPE
+ SYNTAX INTEGER {
+ acTH110BusNetRefSpeed-8khz(0)
+,
+ acTH110BusNetRefSpeed-1544khz(1)
+,
+ acTH110BusNetRefSpeed-20488khz(2)
+
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Determines the NetRef frequency (for both generation and synchronization).
+0 = 8 kHz
+1 = 1.544 MHz
+2 = 2.048 MHz.
+Access: Online.
+AC INI-Param: TDMBUSNETREFSPEED"
+ ::= {acSysTDMClock 5}
+
+
+
+ acSysTDMClockAutoFallBackEnable OBJECT-TYPE
+ SYNTAX INTEGER {
+ disable(0)
+,
+ enable(1)
+
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Enables or disables the PSTN trunk auto-fallback feature.
+Access: Offline.
+AC INI-Param: TDMBusPSTNAutoClockEnable"
+ ::= {acSysTDMClock 6}
+
+
+
+ acSysTDMClockAutoFallBackRevertingEnable OBJECT-TYPE
+ SYNTAX INTEGER {
+ disable(0)
+,
+ enable(1)
+
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Enables/disables the PSTN trunk auto-fallback reverting feature.
+Access: Offline.
+AC INI-Param: TDMBusPSTNAutoClockRevertingEnable"
+ ::= {acSysTDMClock 7}
+
+
+
+ acSysTDMClockBitsReference OBJECT-TYPE
+ SYNTAX Unsigned32 (1..2)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Configures the BITS clock reference when the board source clock
+is set to BITS and Fallback is set to manual or non-revertive.
+
+
+1 = REF_1
+2 = REF_2.
+Access: Online.
+AC INI-Param: TDMBITSClockReference"
+ ::= {acSysTDMClock 8}
+
+
+
+ acSysTDMClockPLLOutOfRange OBJECT-TYPE
+ SYNTAX INTEGER {
+ oor-9-2to12ppm(0)
+,
+ oor-40to52ppm(1)
+,
+ oor-100to130ppm(2)
+,
+ oor-64to83ppm(3)
+,
+ oor-13-8to18ppm(4)
+,
+ oor-24-6to32ppm(5)
+,
+ oor-36-6to47-5ppm(6)
+,
+ oor-52to67-5ppm(7)
+
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Determines the valid PPM range outside the Stratum 3 standard.
+This parameter is only relevant for the TP8410 on the Mediant
+3000. This parameter is enabled when bspTimingModuleCfgTimingMode
+is set to TM_External_MODE(1).
+
+One of the following possible values: OOR_9_2to12ppm(0),OOR_40to52ppm(1),OOR_100to130ppm(2),OOR_64to83ppm(3),OOR_13_8to18ppm(4),OOR_24_6to32ppm(5),OOR_36_6to47_5ppm(6),OOR_52to67_5ppm(7).
+Access: Online.
+AC INI-Param: PLLOutOfRange"
+ ::= {acSysTDMClock 9}
+
+
+
+ acSysTDMClockFallbackClock OBJECT-TYPE
+ SYNTAX INTEGER {
+ network(4)
+,
+ h110-A(8)
+,
+ h110-B(9)
+,
+ netReference1(10)
+,
+ netReference2(11)
+
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Selects the fallback clock source on which board synchronizes
+in the event of clock failure.
+4 = PSTN Network
+8 = H.110A
+9 = H.110B
+10 = NetRef1
+11 = NetRef2.
+Access: Online.
+AC INI-Param: TDMBusFallbackClock"
+ ::= {acSysTDMClock 10}
+
+
+
+ acSysTDMBus OBJECT IDENTIFIER ::= {acSysTDM 2}
+
+
+ acSysTDMBusType OBJECT-TYPE
+ SYNTAX INTEGER {
+ mVIP-BUS(0)
+,
+ sC-BUS(1)
+,
+ uSE-FRAMERS(2)
+,
+ qSLAC-BUS(3)
+,
+ uSE-H110-BUS(4)
+,
+ uSE-EXT-BUS(5)
+,
+ aNALOG-BUS(6)
+,
+ uSE-PSTN-SW-ONLY(8)
+
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Selects the TDM bus interface to be used (only one TDM bus interface
+can be enabled at one time although more than one can
+physically exist on the board).
+Range:
+0 = acMVIP_BUS
+1 = acSC_BUS
+2 = acFRAMERS
+4 = acH100_BUS
+5 = EXT TDM
+6 = Analog
+8 = SW Pstn
+
+Default:
+TP-1610 and TP-2810 = 2
+ TPM-1100 = 5
+ TP-260 = 1.
+Access: Offline.
+AC INI-Param: TDMBUSTYPE"
+ ::= {acSysTDMBus 1}
+
+
+
+ acSysTDMBusSpeed OBJECT-TYPE
+ SYNTAX INTEGER {
+ acTDMBusSpeed-2Mbps(0)
+,
+ acTDMBusSpeed-4Mbps(2)
+,
+ acTDMBusSpeed-8Mbps(3)
+,
+ acTDMBusSpeed-16Mbps(4)
+
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Selects the TDM bus speed according to the Bus Type as follows:
+
+SC = 0/2/3
+H.110/H.100 = 3
+MVIP = 0
+Where:
+
+0 = 2048 kbps
+2 = 4096 kbps
+3 = 8192 kbps
+4 = 16384 kbps
+Default: TP-260 = 2
+ All other boards = 3.
+Access: Offline.
+AC INI-Param: TDMBUSSPEED"
+ ::= {acSysTDMBus 2}
+
+
+
+ acSysTDMBusOutputPort OBJECT-TYPE
+ SYNTAX Unsigned32 (0..31)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Defines the SC/MVIP/H.100/H.110 output port to be used for the
+board's channel #0. All other channels then occupy the next
+timeslots sequentially.
+Range:
+0 to 15 for SC/MVIP
+0 to 31 for H.110.
+Access: Offline.
+AC INI-Param: TDMBUSOUTPUTPORT"
+ ::= {acSysTDMBus 3}
+
+
+
+ acSysTDMBusOutputStartingChannel OBJECT-TYPE
+ SYNTAX Unsigned32 (0..127)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Defines the outgoing TDM Timeslot for board's channel #0. The
+remaining channels are organized sequentially.
+Access: Offline.
+AC INI-Param: TDMBUSOUTPUTSTARTINGCHANNEL"
+ ::= {acSysTDMBus 4}
+
+
+
+ acSysPCM OBJECT IDENTIFIER ::= {acSysTDM 3}
+
+
+ acSysPCMLawSelect OBJECT-TYPE
+ SYNTAX INTEGER {
+ muLaw(3)
+,
+ aLaw(1)
+,
+ automatic(0)
+
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Selects the type of PCM companding law in input/output TDM bus
+(TDM bus is defined using the TDMBusType parameter).
+
+1 = A-law
+3 = Mu-Law.
+Access: Offline.
+AC INI-Param: PCMLAWSELECT"
+ ::= {acSysPCM 1}
+
+
+
+ acSysPCMIdlePattern OBJECT-TYPE
+ SYNTAX Unsigned32 (0..255)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Defines the PCM pattern applied to the E1/T1 timeslot (B-channel)
+when the channel is idle.
+Default:
+0xFF if PCMLawSelect is Mu-Law
+0xD5 if PCMLawSelect is A-Law
+Range = 0x00 to 0xFF.
+Access: Offline.
+AC INI-Param: IDLEPCMPATTERN"
+ ::= {acSysPCM 2}
+
+
+
+ acSysPCMIdleABCDPattern OBJECT-TYPE
+ SYNTAX Unsigned32 (0..255)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Defines the ABCD (CAS) pattern to be applied on the signaling
+bus before it is changed by the user or the PSTN protocol.
+This is only relevant when using PSTN interface with CAS protocols.
+Range = 0x0 to 0xF.
+Access: Offline.
+AC INI-Param: IDLEABCDPATTERN"
+ ::= {acSysPCM 3}
+
+
+
+ acSysPCMSerialPortAuditIntervalMin OBJECT-TYPE
+ SYNTAX Unsigned32 (0..60)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Interval timeout in minutes, of the Serial Port audit. In case
+of 0 value, the audit isn't running.
+Access: Offline.
+AC INI-Param: SerialPortAuditIntervalMin"
+ ::= {acSysPCM 4}
+
+
+
+ acSysNetworkConfig OBJECT IDENTIFIER ::= {acSystemConfiguration 3}
+
+
+ acSysIP OBJECT IDENTIFIER ::= {acSysNetworkConfig 1}
+
+
+ acSysIPAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Board IP Address. In human readable form.
+ in host byte order e.g. 192.10.1.2 = 0xc00a0102).
+ Users should set the subnet mask to a valid value per the
+IP address.
+Access: Online.
+AC INI-Param: N/A"
+ ::= {acSysIP 1}
+
+
+
+ acSysIPSubNetAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Board SubNet Address. In human readable form.
+ (in host byte order e.g. 255.255.255.0 = 0xffffff00).
+ default =255.255.255.0.
+Access: Online.
+AC INI-Param: N/A"
+ ::= {acSysIP 2}
+
+
+
+ acSysIPDefaultGatewayAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Default Gateway Address.
+ Board's Default Gateway IP address. In human readable form.
+ (in host byte order e.g. 192.10.1.255 = 0xc00a01ff).
+Access: Online.
+AC INI-Param: N/A"
+ ::= {acSysIP 3}
+
+
+
+ acSysIPDHCPEnable OBJECT-TYPE
+ SYNTAX INTEGER {
+ disable(0)
+,
+ enable(1)
+
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Enables/disables DHCP support.
+
+0 = Disable
+1 = Enable
+
+After the gateway is powered up, it attempts to communicate
+with a BootP server. If a BootP server does not respond and
+if DHCP is enabled, the gateway attempts to obtain its IP address
+and other network parameters from the DHCP server.
+Note that throughout the DHCP procedure, the BootP/TFTP application
+must be deactivated. If it isn’t deactivated, the gateway
+receives a response from the BootP server instead of
+the DHCP server.
+For additional information on DHCP, refer to the product documentation.
+
+Note: DHCPEnable is a special ‘Hidden’ parameter. Once defined
+and saved in flash memory, its assigned value doesn’t revert
+to its default even if the parameter doesn't appear in
+the INI file.
+Access: Online.
+AC INI-Param: DHCPEnable"
+ ::= {acSysIP 4}
+
+
+
+ acSysIPDHCPSpeedFactor OBJECT-TYPE
+ SYNTAX Unsigned32 (0..10)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Controls the DHCP renewal speed. When set to 0, the DHCP lease
+renewal is disabled. Otherwise, the renewal time is divided
+by this factor. Some DHCP-enabled routers perform better
+when set to 4.
+
+0 = Disable DHCP
+1 = Normal
+2 to 10 = Fast.
+Access: Offline.
+AC INI-Param: DHCPSpeedFactor"
+ ::= {acSysIP 5}
+
+
+
+ acSysIPDnsPrimaryServerType OBJECT-TYPE
+ SYNTAX INTEGER {
+ ipv4(1)
+
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This parameter defines the DNS primary server's IP address type.
+Access: Offline.
+AC INI-Param: N/A"
+ ::= {acSysIP 6}
+
+
+
+ acSysIPDnsPrimaryServer OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This parameter defines the DNS primary server's IP address.
+Range = Legal IP address.
+Access: Offline.
+AC INI-Param: DNSPriServerIP"
+ ::= {acSysIP 7}
+
+
+
+ acSysIPDnsSecondaryServerType OBJECT-TYPE
+ SYNTAX INTEGER {
+ ipv4(1)
+
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This parameter defines the DNS secondary server's IP address
+type.
+Access: Offline.
+AC INI-Param: N/A"
+ ::= {acSysIP 8}
+
+
+
+ acSysIPDnsSecondaryServer OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This parameter defines the DNS secondary server's IP address.
+Range = Legal IP address.
+Access: Offline.
+AC INI-Param: DNSSecServerIP"
+ ::= {acSysIP 9}
+
+
+
+ acSysIPDHCPLeaseRenewalEnable OBJECT-TYPE
+ SYNTAX INTEGER {
+ disable(0)
+,
+ enable(1)
+
+ }
+ MAX-ACCESS read-write
+ STATUS deprecated
+ DESCRIPTION
+ "Enables/disables DHCP renewal support.
+This paramater will only take effect if DHCPEnable = 0.
+
+After the gateway is powered up, it attempts to communicate
+with a BootP server. If a BootP server does not respond and
+if DHCP is disabled, the gateway will boot from flash. It will
+then attempt to communicate with the DHCP server to renew
+the lease.
+Note that throughout the DHCP procedure, the BootP/TFTP application
+must be deactivated. If it isn’t deactivated, the gateway
+receives a response from the BootP server instead of
+the DHCP server.
+For additional information on DHCP, refer to the product documentation.
+
+
+For cases where the booting the board via DHCP is not desirable,
+but renewing DHCP leasing is. if DHCPEnable = 1, this
+paramater will not have any effect.
+Access: Online.
+AC INI-Param: EnableDHCPLeaseRenewal"
+ ::= {acSysIP 10}
+
+
+
+ acSysIPWanInterfaceName OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..38))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Sets the WAN interface name to be used by VOIP signalling applications.
+see CLI documentation for interface name formats.
+Access: Offline.
+AC INI-Param: WanInterfaceName"
+ ::= {acSysIP 11}
+
+
+
+ acMultipleIP OBJECT IDENTIFIER ::= {acSysIP 30}
+
+
+ acMultipleIPEnable OBJECT-TYPE
+ SYNTAX INTEGER {
+ disable(0)
+,
+ enable(1)
+
+ }
+ MAX-ACCESS read-write
+ STATUS obsolete
+ DESCRIPTION
+ "Enables the multiple IPs feature.
+
+0 = Disable
+1 = Enable.
+Access: Offline.
+AC INI-Param: EnableMultipleIPs"
+ ::= {acMultipleIP 1}
+
+
+
+ acMultipleIPEnableTPNCPasOAM OBJECT-TYPE
+ SYNTAX INTEGER {
+ disable(0)
+,
+ enable(1)
+
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Sets the TPNCP location on the Operation, Administration and
+Management (OAM) network, when operating in multiple IPs mode.
+If this parameter is set and the machine is working in multiple
+IPs mode, TPNCP is located on the OAM network.
+
+0 = TPNCP on Control network
+1 = TPNCP on OAM network.
+Access: Offline.
+AC INI-Param: EnableTPNCPasOAM"
+ ::= {acMultipleIP 2}
+
+
+
+ acMultipleIPEnableDNSasOAM OBJECT-TYPE
+ SYNTAX INTEGER {
+ disable(0)
+,
+ enable(1)
+
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Sets the location of the DNS. If this parameter is set and the
+machine is functioning in multiple IPs mode, the DNS is located
+on the OAM network. If not, the DNS is on the control
+network.
+
+0 = Disable
+1 = Enable.
+Access: Offline.
+AC INI-Param: EnableDNSasOAM"
+ ::= {acMultipleIP 3}
+
+
+
+ acMultipleIPEnableNTPasOAM OBJECT-TYPE
+ SYNTAX INTEGER {
+ disable(0)
+,
+ enable(1)
+
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Sets the location of the Network Time Protocol (NTP). If this
+parameter is set and the machine is functioning in multiple
+IPs mode, the NTP is located on the OAM network. If not, the
+NTP is located on the control network.
+
+0 = Disable
+1 = Enable.
+Access: Offline.
+AC INI-Param: EnableNTPasOAM"
+ ::= {acMultipleIP 4}
+
+
+
+ acMultipleIPEnableSCTPasControl OBJECT-TYPE
+ SYNTAX INTEGER {
+ disable(0)
+,
+ enable(1)
+
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Sets the location of the Stream Control Transmission Protocol
+(SCTP). If this parameter is set and the machine is functioning
+in multiple IPs mode, the SCTP is located on the control
+network. If not, the SCTP is located on the OAM network.
+
+0 = Default
+1 = Enable.
+Access: Offline.
+AC INI-Param: EnableSCTPasControl"
+ ::= {acMultipleIP 5}
+
+
+
+ acMultipleIPEnableNetwotkSeparation OBJECT-TYPE
+ SYNTAX INTEGER {
+ disable(0)
+,
+ enable(1)
+
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Enables Network Physical Separation. Allows the user to have
+separate port for each Network. Requires suitable hardware.
+
+0 = Disabled
+1 = Enabled.
+Access: Offline.
+AC INI-Param: ENABLENETWORKPHYSICALSEPARATION"
+ ::= {acMultipleIP 6}
+
+
+
+ acMultipleIPInterfaceTableAction OBJECT-TYPE
+ SYNTAX INTEGER {
+ done(1)
+,
+ validateConfiguration(2)
+
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This is an action object. Set this to validateConfiguration(2)
+when you want the configuration in the acSysInterfaceTable
+to be validated immediately (as opposed to at reset). done(1)
+is the default value for any GET on this object. The results
+of the action should be followed in the syslog.
+Access: Instant.
+AC INI-Param: N/A"
+ ::= {acMultipleIP 7}
+
+
+
+ -- ****************************************
+ -- acNetworkIP table declaration
+ -- ****************************************
+ acNetworkIPTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AcNetworkIPEntry
+ MAX-ACCESS not-accessible
+ STATUS obsolete
+ DESCRIPTION
+ "IP control table. Enables to add, remove or configure the device's networks."
+ ::= {acMultipleIP 21}
+
+
+
+ -- ****************************************
+ -- acNetworkIP table entry
+ -- ****************************************
+ acNetworkIPEntry OBJECT-TYPE
+ SYNTAX AcNetworkIPEntry
+ MAX-ACCESS not-accessible
+ STATUS obsolete
+ DESCRIPTION
+ ""
+ INDEX {acNetworkIPIndex}
+ ::= {acNetworkIPTable 1}
+
+
+
+ -- ****************************************
+ -- acNetworkIP TABLE
+ -- ****************************************
+ AcNetworkIPEntry ::= SEQUENCE {
+ acNetworkIPIndex INTEGER,
+ acNetworkIPIfIndex Unsigned32,
+ acNetworkIPLocalIPAddress IpAddress,
+ acNetworkIPLocalSubnetMask IpAddress,
+ acNetworkIPLocalDefGW IpAddress,
+ acNetworkIPAdminState INTEGER
+ }
+
+
+
+ acNetworkIPIndex OBJECT-TYPE
+ SYNTAX INTEGER {
+ oam(1)
+,
+ media(2)
+,
+ control(3)
+
+ }
+ MAX-ACCESS not-accessible
+ STATUS obsolete
+ DESCRIPTION
+ "The row's index.
+AC INI-Param: N/A"
+ ::= {acNetworkIPEntry 1}
+
+
+
+ acNetworkIPIfIndex OBJECT-TYPE
+ SYNTAX Unsigned32 (0..2)
+ MAX-ACCESS read-only
+ STATUS obsolete
+ DESCRIPTION
+ "The row's index in the IF MIB.
+The IF MIB is not yet supported and so for now this is the
+same as the ipCidrRouteIfIndex object.
+0 = OAM
+1 = Media
+2 = Control.
+AC INI-Param: N/A"
+ ::= {acNetworkIPEntry 2}
+
+
+
+ acNetworkIPLocalIPAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-write
+ STATUS obsolete
+ DESCRIPTION
+ "Sets the IP address of the OAM (Operation, Administration &
+Management) when operating in multiple IPs mode.
+
+Range: Legal IP address
+Default = 0.0.0.0.
+Access: Online.
+AC INI-Param: N/A"
+ ::= {acNetworkIPEntry 3}
+
+
+
+ acNetworkIPLocalSubnetMask OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-write
+ STATUS obsolete
+ DESCRIPTION
+ "Sets the Subnet Mask for the OAM interface, when operating in
+multiple IPs mode.
+
+Range: Legal Subnet
+Default = 0.0.0.0.
+Access: Online.
+AC INI-Param: N/A"
+ ::= {acNetworkIPEntry 4}
+
+
+
+ acNetworkIPLocalDefGW OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-write
+ STATUS obsolete
+ DESCRIPTION
+ "Sets the Default gateway for the OAM interface when operating
+in multiple IPs mode.
+
+Range: Legal IP address in subnet
+Default = 0.0.0.0.
+Access: Online.
+AC INI-Param: N/A"
+ ::= {acNetworkIPEntry 5}
+
+
+
+ acNetworkIPAdminState OBJECT-TYPE
+ SYNTAX INTEGER {
+ lock(1)
+,
+ unLock(2)
+
+ }
+ MAX-ACCESS read-write
+ STATUS obsolete
+ DESCRIPTION
+ "Determines if a row is currentely active or not.
+Lock(1) - the row is in configuration (non active) state.
+UnLock(2) - row is in active state.
+Access: Online.
+AC INI-Param: N/A"
+ ::= {acNetworkIPEntry 6}
+
+
+
+ -- ****************************************
+ -- acSysInterface table declaration
+ -- ****************************************
+ acSysInterfaceTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AcSysInterfaceEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Multiple Interfaces' Interface Table"
+ ::= {acMultipleIP 22}
+
+
+
+ -- ****************************************
+ -- acSysInterface table entry
+ -- ****************************************
+ acSysInterfaceEntry OBJECT-TYPE
+ SYNTAX AcSysInterfaceEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ ""
+ INDEX {acSysInterfaceIndex}
+ ::= {acSysInterfaceTable 1}
+
+
+
+ -- ****************************************
+ -- acSysInterface TABLE
+ -- ****************************************
+ AcSysInterfaceEntry ::= SEQUENCE {
+ acSysInterfaceIndex Unsigned32,
+ acSysInterfaceRowStatus RowStatus,
+ acSysInterfaceAction INTEGER,
+ acSysInterfaceActionRes INTEGER,
+ acSysInterfaceApplicationTypes INTEGER,
+ acSysInterfaceMode INTEGER,
+ acSysInterfaceIPAddress SnmpAdminString,
+ acSysInterfacePrefixLength Unsigned32,
+ acSysInterfaceGateway SnmpAdminString,
+ acSysInterfaceVlanID Unsigned32,
+ acSysInterfaceName SnmpAdminString,
+ acSysInterfacePrimaryDNSServerIPAddress SnmpAdminString,
+ acSysInterfaceSecondaryDNSServerIPAddress SnmpAdminString,
+ acSysInterfaceUnderlyingInterface RowPointer
+ }
+
+
+
+ acSysInterfaceIndex OBJECT-TYPE
+ SYNTAX Unsigned32 (0..31)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Index Field for line.
+AC INI-Param: InterfaceTable_Index"
+ ::= {acSysInterfaceEntry 1}
+
+
+
+ acSysInterfaceRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "ROWSTATUS Field for line.
+AC INI-Param: InterfaceTable_RowStatus"
+ ::= {acSysInterfaceEntry 2}
+
+
+
+ acSysInterfaceAction OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(0)
+
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Mangement Field for ACTIONS.
+AC INI-Param: InterfaceTable_Action"
+ ::= {acSysInterfaceEntry 3}
+
+
+
+ acSysInterfaceActionRes OBJECT-TYPE
+ SYNTAX INTEGER {
+ succeeded(0)
+
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Mangement Field for ACTIONS RESULT.
+AC INI-Param: InterfaceTable_ActionRes"
+ ::= {acSysInterfaceEntry 4}
+
+
+
+ acSysInterfaceApplicationTypes OBJECT-TYPE
+ SYNTAX INTEGER {
+ oam(0)
+,
+ media(1)
+,
+ control(2)
+,
+ oamAndMedia(3)
+,
+ oamAndControl(4)
+,
+ mediaAndControl(5)
+,
+ oamAndMediaAndControl(6)
+,
+ maintenance(99)
+
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The type assigned to the interface.
+Access: Offline.
+AC INI-Param: InterfaceTable_ApplicationTypes"
+ ::= {acSysInterfaceEntry 5}
+
+
+
+ acSysInterfaceMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ iPv6PrefixManual(3)
+,
+ iPv6Manual(4)
+,
+ iPv4Manual(10)
+
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Interface configuration mode.
+Access: Offline.
+AC INI-Param: InterfaceTable_InterfaceMode"
+ ::= {acSysInterfaceEntry 6}
+
+
+
+ acSysInterfaceIPAddress OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..45))
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "IP Address (can be either IPv4 or IPv6) for this interface.
+Access: Online.
+AC INI-Param: InterfaceTable_IPAddress"
+ ::= {acSysInterfaceEntry 7}
+
+
+
+ acSysInterfacePrefixLength OBJECT-TYPE
+ SYNTAX Unsigned32 (0..128)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The number of ‘1’ bits in this interface’s netmask.
+Access: Offline.
+AC INI-Param: InterfaceTable_PrefixLength"
+ ::= {acSysInterfaceEntry 8}
+
+
+
+ acSysInterfaceGateway OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..45))
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Default Gateway. Filled in one row only. 0 in others.
+Access: Offline.
+AC INI-Param: InterfaceTable_Gateway"
+ ::= {acSysInterfaceEntry 9}
+
+
+
+ acSysInterfaceVlanID OBJECT-TYPE
+ SYNTAX Unsigned32 (0..4094)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "VLAN ID of this interface.
+Access: Offline.
+AC INI-Param: InterfaceTable_VlanID"
+ ::= {acSysInterfaceEntry 10}
+
+
+
+ acSysInterfaceName OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..16))
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "a 16 character string of this interface’s name.
+Access: Offline.
+AC INI-Param: InterfaceTable_InterfaceName"
+ ::= {acSysInterfaceEntry 11}
+
+
+
+ acSysInterfacePrimaryDNSServerIPAddress OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..45))
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Primary DNS server IP address.
+Access: Online.
+AC INI-Param: InterfaceTable_PrimaryDNSServerIPAddress"
+ ::= {acSysInterfaceEntry 12}
+
+
+
+ acSysInterfaceSecondaryDNSServerIPAddress OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..45))
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Secondary DNS server IP address.
+Access: Online.
+AC INI-Param: InterfaceTable_SecondaryDNSServerIPAddress"
+ ::= {acSysInterfaceEntry 13}
+
+
+
+ acSysInterfaceUnderlyingInterface OBJECT-TYPE
+ SYNTAX RowPointer
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Multiple Interfaces' Interface Table.
+Access: Offline.
+AC INI-Param: InterfaceTable_UnderlyingInterface"
+ ::= {acSysInterfaceEntry 14}
+
+
+
+ -- ****************************************
+ -- acSysPhysicalPorts table declaration
+ -- ****************************************
+ acSysPhysicalPortsTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AcSysPhysicalPortsEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Physical Ports Table"
+ ::= {acMultipleIP 23}
+
+
+
+ -- ****************************************
+ -- acSysPhysicalPorts table entry
+ -- ****************************************
+ acSysPhysicalPortsEntry OBJECT-TYPE
+ SYNTAX AcSysPhysicalPortsEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ ""
+ INDEX {acSysPhysicalPortsIndex}
+ ::= {acSysPhysicalPortsTable 1}
+
+
+
+ -- ****************************************
+ -- acSysPhysicalPorts TABLE
+ -- ****************************************
+ AcSysPhysicalPortsEntry ::= SEQUENCE {
+ acSysPhysicalPortsIndex Unsigned32,
+ acSysPhysicalPortsRowStatus RowStatus,
+ acSysPhysicalPortsAction INTEGER,
+ acSysPhysicalPortsActionRes INTEGER,
+ acSysPhysicalPortsPort SnmpAdminString,
+ acSysPhysicalPortsMode INTEGER,
+ acSysPhysicalPortsNativeVlan Unsigned32,
+ acSysPhysicalPortsSpeedDuplex INTEGER,
+ acSysPhysicalPortsPortDescription SnmpAdminString,
+ acSysPhysicalPortsGroupMember SnmpAdminString,
+ acSysPhysicalPortsGroupStatus SnmpAdminString
+ }
+
+
+
+ acSysPhysicalPortsIndex OBJECT-TYPE
+ SYNTAX Unsigned32 (0..5)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Index Field for line.
+AC INI-Param: PhysicalPortsTable_Index"
+ ::= {acSysPhysicalPortsEntry 1}
+
+
+
+ acSysPhysicalPortsRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "ROWSTATUS Field for line.
+AC INI-Param: PhysicalPortsTable_RowStatus"
+ ::= {acSysPhysicalPortsEntry 2}
+
+
+
+ acSysPhysicalPortsAction OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(0)
+
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Mangement Field for ACTIONS.
+AC INI-Param: PhysicalPortsTable_Action"
+ ::= {acSysPhysicalPortsEntry 3}
+
+
+
+ acSysPhysicalPortsActionRes OBJECT-TYPE
+ SYNTAX INTEGER {
+ succeeded(0)
+
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Mangement Field for ACTIONS RESULT.
+AC INI-Param: PhysicalPortsTable_ActionRes"
+ ::= {acSysPhysicalPortsEntry 4}
+
+
+
+ acSysPhysicalPortsPort OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..17))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Physical Ports Table.
+AC INI-Param: PhysicalPortsTable_Port"
+ ::= {acSysPhysicalPortsEntry 5}
+
+
+
+ acSysPhysicalPortsMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ disable(0)
+,
+ enable(1)
+
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Port Enable/Disable.
+AC INI-Param: PhysicalPortsTable_Mode"
+ ::= {acSysPhysicalPortsEntry 6}
+
+
+
+ acSysPhysicalPortsNativeVlan OBJECT-TYPE
+ SYNTAX Unsigned32 (0..4096)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Port's Native VID or PVID.
+Access: Offline.
+AC INI-Param: PhysicalPortsTable_NativeVlan"
+ ::= {acSysPhysicalPortsEntry 7}
+
+
+
+ acSysPhysicalPortsSpeedDuplex OBJECT-TYPE
+ SYNTAX INTEGER {
+ s10BaseTHalfDuplex(0)
+,
+ s10BaseTFullDuplex(1)
+,
+ s100BaseTHalfDuplex(2)
+,
+ s100BaseTFullDuplex(3)
+,
+ autoNegotiation(4)
+,
+ s1000BaseTHalfDuplex(6)
+,
+ s1000BaseTFullDuplex(7)
+
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Port's Speed and Duplex Mode.
+Access: Offline.
+AC INI-Param: PhysicalPortsTable_SpeedDuplex"
+ ::= {acSysPhysicalPortsEntry 8}
+
+
+
+ acSysPhysicalPortsPortDescription OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..17))
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Port's User Description.
+Access: Offline.
+AC INI-Param: PhysicalPortsTable_PortDescription"
+ ::= {acSysPhysicalPortsEntry 9}
+
+
+
+ acSysPhysicalPortsGroupMember OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..17))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Physical Ports Table.
+AC INI-Param: PhysicalPortsTable_GroupMember"
+ ::= {acSysPhysicalPortsEntry 10}
+
+
+
+ acSysPhysicalPortsGroupStatus OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..17))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Active or Redundant Status.
+AC INI-Param: PhysicalPortsTable_GroupStatus"
+ ::= {acSysPhysicalPortsEntry 11}
+
+
+
+ -- ****************************************
+ -- acSysEtherGroup table declaration
+ -- ****************************************
+ acSysEtherGroupTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AcSysEtherGroupEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Ether Group Table"
+ ::= {acMultipleIP 24}
+
+
+
+ -- ****************************************
+ -- acSysEtherGroup table entry
+ -- ****************************************
+ acSysEtherGroupEntry OBJECT-TYPE
+ SYNTAX AcSysEtherGroupEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ ""
+ INDEX {acSysEtherGroupIndex}
+ ::= {acSysEtherGroupTable 1}
+
+
+
+ -- ****************************************
+ -- acSysEtherGroup TABLE
+ -- ****************************************
+ AcSysEtherGroupEntry ::= SEQUENCE {
+ acSysEtherGroupIndex Unsigned32,
+ acSysEtherGroupRowStatus RowStatus,
+ acSysEtherGroupAction INTEGER,
+ acSysEtherGroupActionRes INTEGER,
+ acSysEtherGroupGroup SnmpAdminString,
+ acSysEtherGroupMode INTEGER,
+ acSysEtherGroupMember1 RowPointer,
+ acSysEtherGroupMember2 RowPointer
+ }
+
+
+
+ acSysEtherGroupIndex OBJECT-TYPE
+ SYNTAX Unsigned32 (0..5)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Index Field for line.
+AC INI-Param: EtherGroupTable_Index"
+ ::= {acSysEtherGroupEntry 1}
+
+
+
+ acSysEtherGroupRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "ROWSTATUS Field for line
+ Static table - only notInService/active supported.
+AC INI-Param: EtherGroupTable_RowStatus"
+ ::= {acSysEtherGroupEntry 2}
+
+
+
+ acSysEtherGroupAction OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(0)
+
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Mangement Field for ACTIONS.
+AC INI-Param: EtherGroupTable_Action"
+ ::= {acSysEtherGroupEntry 3}
+
+
+
+ acSysEtherGroupActionRes OBJECT-TYPE
+ SYNTAX INTEGER {
+ succeeded(0)
+
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Mangement Field for ACTIONS RESULT.
+AC INI-Param: EtherGroupTable_ActionRes"
+ ::= {acSysEtherGroupEntry 4}
+
+
+
+ acSysEtherGroupGroup OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..15))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Ethernet Group's Name.
+AC INI-Param: EtherGroupTable_Group"
+ ::= {acSysEtherGroupEntry 5}
+
+
+
+ acSysEtherGroupMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ oneRXoneTX(2)
+,
+ twoRXoneTX(3)
+,
+ twoRXtwoTX(4)
+
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Group Mode of Operation.
+Access: Offline.
+AC INI-Param: EtherGroupTable_Mode"
+ ::= {acSysEtherGroupEntry 6}
+
+
+
+ acSysEtherGroupMember1 OBJECT-TYPE
+ SYNTAX RowPointer
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "First Member of the Group.
+Select the OID corresponding to the one appearing in the Physical
+Ports table.
+The OID should be 1.3.6.1.4.1.5003.9.10.10.1.3.1.30.23.1.5.
+acSysPhysicalPortsPort.
+Access: Offline.
+AC INI-Param: EtherGroupTable_Member1"
+ ::= {acSysEtherGroupEntry 7}
+
+
+
+ acSysEtherGroupMember2 OBJECT-TYPE
+ SYNTAX RowPointer
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Second Member of the Group.
+Select the OID corresponding to the one appearing in the Physical
+Ports table.
+The OID should be 1.3.6.1.4.1.5003.9.10.10.1.3.1.30.23.1.5.
+acSysPhysicalPortsPort.
+Access: Offline.
+AC INI-Param: EtherGroupTable_Member2"
+ ::= {acSysEtherGroupEntry 8}
+
+
+
+ acSyslog OBJECT IDENTIFIER ::= {acSysNetworkConfig 2}
+
+
+ acSyslogServerIPAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This parameter defines the IP address in dotted format notation.
+e.g., 192.10.1.255
+Range = Legal IP address.
+Access: Online.
+AC INI-Param: SYSLOGSERVERIP"
+ ::= {acSyslog 1}
+
+
+
+ acSyslogEnable OBJECT-TYPE
+ SYNTAX INTEGER {
+ disable(0)
+,
+ enable(1)
+
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Enable SysLog protocol log.
+Access: Online.
+AC INI-Param: ENABLESYSLOG"
+ ::= {acSyslog 2}
+
+
+
+ acSyslogAcSyslogServerPortNumber OBJECT-TYPE
+ SYNTAX Unsigned32 (0..65535)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Defines the Port number of the Syslog Server.
+Range = Legal Port Number.
+Access: Online.
+AC INI-Param: SyslogServerPort"
+ ::= {acSyslog 3}
+
+
+
+ acSyslogFacility OBJECT-TYPE
+ SYNTAX Unsigned32 (16..23)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "parameter to determine the facility number at syslog messages.
+can be:
+16 = local use 0 (local0)
+17 = local use 1 (local1)
+..
+23 = local use 0 (local7).
+Access: Online.
+AC INI-Param: SyslogFacility"
+ ::= {acSyslog 4}
+
+
+
+ acSysNTP OBJECT IDENTIFIER ::= {acSysNetworkConfig 3}
+
+
+ acSysNTPServerIPAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This parameter is used to define the NTP server's IP address.
+Range = Legal IP address.
+Access: Instant.
+AC INI-Param: NTPServerIP"
+ ::= {acSysNTP 1}
+
+
+
+ acSysNTPUtcOffset OBJECT-TYPE
+ SYNTAX Integer32 (-43200..43200)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This parameter is used to define the NTP time to offset, in
+seconds.
+
+Default = 0
+Range = -43200 to +43200 seconds.
+Access: Instant.
+AC INI-Param: NTPServerUTCOffset"
+ ::= {acSysNTP 2}
+
+
+
+ acSysNTPUpdateInterval OBJECT-TYPE
+ SYNTAX Unsigned32 (1..2147483647)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This parameter defines the NTP update interval, in seconds.
+It's inadvisable to set it exceeding 1 month (2592000 seconds).
+Range = 0 to 2592000 seconds
+Default = 86400 seconds.
+Access: Instant.
+AC INI-Param: NTPUpdateInterval"
+ ::= {acSysNTP 3}
+
+
+
+ acSysNTPSecondaryServerIP OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Defines the NTP Secondary Server IP address.
+Access: Instant.
+AC INI-Param: NTPSecondaryServerIP"
+ ::= {acSysNTP 4}
+
+
+
+ acSysDayLightSavingTime OBJECT IDENTIFIER ::= {acSysNTP 21}
+
+
+ acSysDayLightSavingTimeMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ disable(0)
+,
+ enable(1)
+
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Determines whether to enable the time ajustment to day light
+saving time while update time from NTP server.
+Access: Instant.
+AC INI-Param: DayLightSavingTimeEnable"
+ ::= {acSysDayLightSavingTime 1}
+
+
+
+ acSysDayLightSavingTimeOffset OBJECT-TYPE
+ SYNTAX Unsigned32 (0..120)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "when DayLightSavingTimeEnable is Enable, this parametes determine
+the fix size in minutes: 0-120.
+Access: Instant.
+AC INI-Param: DayLightSavingTimeOffset"
+ ::= {acSysDayLightSavingTime 2}
+
+
+
+ acSysDayLightSavingTimeStart OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..16))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This parameter defines the date and time of starting day light
+time in current year.
+2 Possible Formats: 1. (Day of Year) mo:dd:hh:mm . 2. (Day
+of Month) mo:wday/week:hh:mm where week of month is 01-04, or
+05 for specifying last week of the month, and wday is one
+of the Week Days: SUN, MON, TUE, WED, THU, FRI, SAT.
+Access: Instant.
+AC INI-Param: DayLightSavingTimeStart"
+ ::= {acSysDayLightSavingTime 3}
+
+
+
+ acSysDayLightSavingTimeEnd OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..16))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This parameter defines the date and time of ending day light
+time in current year.
+2 Possible Formats: 1. (Day of Year) mo:dd:hh:mm . 2. (Day
+of Month) mo:wday/week:hh:mm where week of month is 01-04, or
+05 for specifying last week of the month, and wday is one
+of the Week Days: SUN, MON, TUE, WED, THU, FRI, SAT.
+Access: Instant.
+AC INI-Param: DayLightSavingTimeEnd"
+ ::= {acSysDayLightSavingTime 4}
+
+
+
+ acSysWEB OBJECT IDENTIFIER ::= {acSysNetworkConfig 4}
+
+
+ acSysWEBConfigDisable OBJECT-TYPE
+ SYNTAX INTEGER {
+ enable(0)
+,
+ disable(1)
+
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Enables or disables Web Configuration.
+0 = Read & Write mode (default)
+1 = Read Only mode.
+Access: Offline.
+AC INI-Param: DISABLEWEBCONFIG"
+ ::= {acSysWEB 1}
+
+
+
+ acSysWEBHTTPSOnly OBJECT-TYPE
+ SYNTAX INTEGER {
+ disable(0)
+,
+ enable(1)
+
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Use this parameter to allow only HTTPS connections (force security).
+When set to 1, unencrypted HTTP (normally, port 80)
+is blocked.
+Access: Offline.
+AC INI-Param: HTTPSOnly"
+ ::= {acSysWEB 2}
+
+
+
+ acSysWEBHTTPSPort OBJECT-TYPE
+ SYNTAX Unsigned32 (0..65535)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Determine the local Secure HTTPS port of the device.
+The default port is 443.
+Range = 1-65535 (other restrictions may apply in this range).
+Access: Offline.
+AC INI-Param: HTTPSPORT"
+ ::= {acSysWEB 3}
+
+
+
+ acSysWEBWebUseRadiusLogin OBJECT-TYPE
+ SYNTAX INTEGER {
+ disable(0)
+,
+ enable(1)
+
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Uses the RADIUS (Remote Authentication Dial-In User Server/Service)
+for Web interface authentication.
+Make sure that ENABLERADIUS is on.
+Use of this parameter without HTTPSONLY = 1 is not recommended.
+Access: Instant.
+AC INI-Param: WEBRADIUSLOGIN"
+ ::= {acSysWEB 4}
+
+
+
+ acSysWEBHTTPSCipherString OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..200))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Requires client certificates for HTTPS connection. The client
+certificate must be preloaded on the gateway, and its matching
+private key must be installed on the managing computer.
+Time and date must be correctly set on the gateway, for the
+client certificate to be verified.
+Access: Offline.
+AC INI-Param: HTTPSCipherString"
+ ::= {acSysWEB 5}
+
+
+
+ acSysWEBDenyAuthenticationTimer OBJECT-TYPE
+ SYNTAX Unsigned32 (0..86400)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Defines the time the next authentication attempt from the last
+authentication faild IP should be denied.
+
+The range can be any value from 0 - 86400 in seconds.
+Access: Online.
+AC INI-Param: DenyAuthenticationTimer "
+ ::= {acSysWEB 6}
+
+
+
+ acSysWEBWanHttpPort OBJECT-TYPE
+ SYNTAX Unsigned32 (0..65535)
+ MAX-ACCESS read-write
+ STATUS obsolete
+ DESCRIPTION
+ "Determines the WAN HTTP port of the device.
+If set to 0, WAN HTTP access will not be possible.
+Range = 0 to 65535 (other restrictions may apply in this range).
+Access: Offline.
+AC INI-Param: WanMgmtHttpPort"
+ ::= {acSysWEB 7}
+
+
+
+ acSysWEBWanHttpsPort OBJECT-TYPE
+ SYNTAX Unsigned32 (0..65535)
+ MAX-ACCESS read-write
+ STATUS obsolete
+ DESCRIPTION
+ "Determines the WAN HTTPS port of the device.
+If set to 0, WAN HTTPS access will not be possible.
+Range = 0 to 65535 (other restrictions may apply in this range).
+Access: Offline.
+AC INI-Param: WanMgmtHttpsPort"
+ ::= {acSysWEB 8}
+
+
+
+ acSysWEBAllowWanHttp OBJECT-TYPE
+ SYNTAX INTEGER {
+ disable(0)
+,
+ enable(1)
+
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Enables or disables WAN access to the management interface via
+HTTP.
+Access: Offline.
+AC INI-Param: AllowWanHttp"
+ ::= {acSysWEB 9}
+
+
+
+ acSysWEBAllowWanHttps OBJECT-TYPE
+ SYNTAX INTEGER {
+ disable(0)
+,
+ enable(1)
+
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Enables or disables WAN access to the management interface via
+HTTPS.
+Access: Offline.
+AC INI-Param: AllowWanHttps"
+ ::= {acSysWEB 10}
+
+
+
+ -- ****************************************
+ -- acSysWEBACL table declaration
+ -- ****************************************
+ acSysWEBACLTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AcSysWEBACLEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Access control list for the WEB."
+ ::= {acSysWEB 21}
+
+
+
+ -- ****************************************
+ -- acSysWEBACL table entry
+ -- ****************************************
+ acSysWEBACLEntry OBJECT-TYPE
+ SYNTAX AcSysWEBACLEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ ""
+ INDEX {acSysWEBACLIndex}
+ ::= {acSysWEBACLTable 1}
+
+
+
+ -- ****************************************
+ -- acSysWEBACL TABLE
+ -- ****************************************
+ AcSysWEBACLEntry ::= SEQUENCE {
+ acSysWEBACLIndex Unsigned32,
+ acSysWEBACLIP IpAddress
+ }
+
+
+
+ acSysWEBACLIndex OBJECT-TYPE
+ SYNTAX Unsigned32 (0..9)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "WEB ACL (Access Control List) index.
+AC INI-Param: N/A"
+ ::= {acSysWEBACLEntry 1}
+
+
+
+ acSysWEBACLIP OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Allows IP addresses to connect to the Web interface. Set to
+zeroes to allow all IP addresses.
+Range: Valid IP address
+.
+Access: Instant.
+AC INI-Param: WEBACCESSLIST"
+ ::= {acSysWEBACLEntry 2}
+
+
+
+ acSysWEBAccess OBJECT IDENTIFIER ::= {acSysNetworkConfig 5}
+
+
+ -- ****************************************
+ -- acSysWEBAccess table declaration
+ -- ****************************************
+ acSysWEBAccessTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AcSysWEBAccessEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ ""
+ ::= {acSysWEBAccess 1}
+
+
+
+ -- ****************************************
+ -- acSysWEBAccess table entry
+ -- ****************************************
+ acSysWEBAccessEntry OBJECT-TYPE
+ SYNTAX AcSysWEBAccessEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ ""
+ INDEX {acSysWEBAccessIndex}
+ ::= {acSysWEBAccessTable 1}
+
+
+
+ -- ****************************************
+ -- acSysWEBAccess TABLE
+ -- ****************************************
+ AcSysWEBAccessEntry ::= SEQUENCE {
+ acSysWEBAccessRowStatus Unsigned32,
+ acSysWEBAccessAction Unsigned32,
+ acSysWEBAccessActionResult Unsigned32,
+ acSysWEBAccessIndex INTEGER,
+ acSysWEBAccessUserName SnmpAdminString,
+ acSysWEBAccessUserCode SnmpAdminString,
+ acSysWEBAccessWebAuthMode INTEGER
+ }
+
+
+
+ acSysWEBAccessRowStatus OBJECT-TYPE
+ SYNTAX Unsigned32 (1..1)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "WEB Basic row-status.
+AC INI-Param: WEBAccessRowStatus"
+ ::= {acSysWEBAccessEntry 1}
+
+
+
+ acSysWEBAccessAction OBJECT-TYPE
+ SYNTAX Unsigned32 (0..0)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "WEB Access action.
+AC INI-Param: WEBAccessAction"
+ ::= {acSysWEBAccessEntry 2}
+
+
+
+ acSysWEBAccessActionResult OBJECT-TYPE
+ SYNTAX Unsigned32 (0..0)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "WEB Access action result.
+AC INI-Param: N/A"
+ ::= {acSysWEBAccessEntry 3}
+
+
+
+ acSysWEBAccessIndex OBJECT-TYPE
+ SYNTAX INTEGER {
+ administrator(0)
+,
+ monitoringLevel(1)
+
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "WEB Access index.
+AC INI-Param: N/A"
+ ::= {acSysWEBAccessEntry 4}
+
+
+
+ acSysWEBAccessUserName OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..60))
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "WEB Basic user name. Range = String[26].
+Access: Instant.
+AC INI-Param: WEBAccessUserName "
+ ::= {acSysWEBAccessEntry 5}
+
+
+
+ acSysWEBAccessUserCode OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..60))
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "WEB Basic userAccess.
+Access: Instant.
+AC INI-Param: WEBAccessUserCode "
+ ::= {acSysWEBAccessEntry 6}
+
+
+
+ acSysWEBAccessWebAuthMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ basicMode(0)
+,
+ digestModeWhenPossible(1)
+,
+ digestModeHTTPOnly(2)
+
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Selects HTTP basic (clear text) or digest (MD5) authentication
+for the web interface.
+When set to 0, basic authentication (clear text) will be used.
+When set to 1, digest authentication (MD5) will be used.
+When set to 2, digest authentication (MD5) will be used for
+HTTP, while basic authentication will be used for HTTPS.
+Note that turning on RADIUS login forces basic authentication.
+Access: Instant.
+AC INI-Param: WebAuthMode"
+ ::= {acSysWEBAccessEntry 7}
+
+
+
+ acSysNATTraversal OBJECT IDENTIFIER ::= {acSysNetworkConfig 6}
+
+
+ acSysTelnet OBJECT IDENTIFIER ::= {acSysNetworkConfig 7}
+
+
+ acSysTelnetServerEnable OBJECT-TYPE
+ SYNTAX INTEGER {
+ disable(0)
+,
+ enable(1)
+,
+ ssl(2)
+
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Enables or disables the embedded Telnet server. Telnet is disabled
+by default for security reasons.
+0 = Disable
+1= Enable
+2 = SSL mode (if available - requires an SSL-aware Telnet client
+software)
+SSL mode is not available on the MP-108 / MP-124 media gateways.
+Access: Instant.
+AC INI-Param: TelnetServerEnable"
+ ::= {acSysTelnet 1}
+
+
+
+ acSysTelnetServerPort OBJECT-TYPE
+ SYNTAX Unsigned32 (0..65535)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Defines the port number for the embedded Telnet server.
+Range = Valid port number.
+Access: Online.
+AC INI-Param: TELNETSERVERPORT"
+ ::= {acSysTelnet 2}
+
+
+
+ acSysTelnetServerIdleDisconnect OBJECT-TYPE
+ SYNTAX Unsigned32 (0..2147483647)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This parameter is used to set the timeout for disconnection
+of an idle Telnet session (minutes). When set to zero, idle
+sessions are not disconnected.
+
+Range: Any number.
+Access: Offline.
+AC INI-Param: TelnetServerIdleDisconnect"
+ ::= {acSysTelnet 3}
+
+
+
+ acSysTelnetSSHServerPort OBJECT-TYPE
+ SYNTAX Unsigned32 (0..65535)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Defines the port number for the embedded SSH server.
+Range = Valid port number.
+Access: Online.
+AC INI-Param: SSHServerPort"
+ ::= {acSysTelnet 4}
+
+
+
+ acSysTelnetSSHServerEnable OBJECT-TYPE
+ SYNTAX INTEGER {
+ disable(0)
+,
+ enable(1)
+
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Enables or disables the embedded SSH server.
+0 = Disable
+1= Enable
+.
+Access: Online.
+AC INI-Param: SSHServerEnable"
+ ::= {acSysTelnet 5}
+
+
+
+ acSysTelnetSSHAdminKey OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..510))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This parameter holds an RSA public key for strong authentication
+to the SSH interface (if enabled).
+The value should be a base64-encoded string
+ see the Security appendix for additional information.
+Access: Instant.
+AC INI-Param: SSHAdminKey"
+ ::= {acSysTelnet 6}
+
+
+
+ acSysTelnetSSHRequirePublicKey OBJECT-TYPE
+ SYNTAX INTEGER {
+ disable(0)
+,
+ enable(1)
+
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Enables or disables RSA public keys in SSH.
+When set to 0, RSA public keys are optional (if SSHAdminKey
+is set).
+When set to 1, RSA public keys are mandatory.
+Access: Instant.
+AC INI-Param: SSHRequirePublicKey"
+ ::= {acSysTelnet 7}
+
+
+
+ acSysTelnetServerWanPort OBJECT-TYPE
+ SYNTAX Unsigned32 (0..65535)
+ MAX-ACCESS read-write
+ STATUS obsolete
+ DESCRIPTION
+ "Determines the WAN Telnet port of the device.
+If set to 0, WAN Telnet access will not be possible.
+Range = 0 to 65535 (other restrictions may apply in this range).
+Access: Offline.
+AC INI-Param: WanMgmtTelnetPort"
+ ::= {acSysTelnet 8}
+
+
+
+ acSysTelnetWanSSHServerPort OBJECT-TYPE
+ SYNTAX Unsigned32 (0..65535)
+ MAX-ACCESS read-write
+ STATUS obsolete
+ DESCRIPTION
+ "Determines the WAN Telnet port of the device.
+If set to 0, WAN Telnet access will not be possible.
+Range = 0 to 65535 (other restrictions may apply in this range).
+Access: Offline.
+AC INI-Param: WanMgmtSSHPort"
+ ::= {acSysTelnet 9}
+
+
+
+ acSysTelnetSSHMaxSessions OBJECT-TYPE
+ SYNTAX Unsigned32 (1..2)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Configure maximum allowed number of SSH sessions.
+Access: Online.
+AC INI-Param: SSHMaxSessions"
+ ::= {acSysTelnet 10}
+
+
+
+ acSysTelnetSSHMaxPayloadSize OBJECT-TYPE
+ SYNTAX Unsigned32 (550..32768)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Configure maximum uncompressed payload size for SSH packets,
+in bytes.
+Access: Online.
+AC INI-Param: SSHMaxPayloadSize"
+ ::= {acSysTelnet 11}
+
+
+
+ acSysTelnetSSHMaxBinaryPacketSize OBJECT-TYPE
+ SYNTAX Unsigned32 (582..35000)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Configure maximum packet size for SSH packets, in bytes.
+Access: Online.
+AC INI-Param: SSHMaxBinaryPacketSize"
+ ::= {acSysTelnet 12}
+
+
+
+ acSysTelnetAllowWanTelnet OBJECT-TYPE
+ SYNTAX INTEGER {
+ disable(0)
+,
+ enable(1)
+
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Enables or disables WAN access to the management interface via
+Telnet.
+Access: Offline.
+AC INI-Param: AllowWanTelnet"
+ ::= {acSysTelnet 13}
+
+
+
+ acSysTelnetAllowWanSSH OBJECT-TYPE
+ SYNTAX INTEGER {
+ disable(0)
+,
+ enable(1)
+
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Enables or disables WAN access to the management interface via
+SSH.
+Access: Offline.
+AC INI-Param: AllowWanSSH"
+ ::= {acSysTelnet 14}
+
+
+
+ acSysHTTPClient OBJECT IDENTIFIER ::= {acSysNetworkConfig 8}
+
+
+ acSysHTTPClientAutoUpdatePredefinedTime OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..6))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Schedules an automatic update to a predefined time of the day.
+The range is 'HH:MM' (24-hour format).
+For example: 20:18
+.
+Access: Online.
+AC INI-Param: AutoUpdatePredefinedTime"
+ ::= {acSysHTTPClient 1}
+
+
+
+ acSysHTTPClientAutoUpdateFrequency OBJECT-TYPE
+ SYNTAX Unsigned32 (0..65536)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Determines the number of minutes the gateway waits between automatic
+updates.
+
+The default value is 0 (the update at fixed intervals mechanism
+is disabled).
+
+Range: Any number
+.
+Access: Online.
+AC INI-Param: AutoUpdateFrequency"
+ ::= {acSysHTTPClient 2}
+
+
+
+ acSysHTTPClientAutoUpdateCmpFile OBJECT-TYPE
+ SYNTAX INTEGER {
+ disable(0)
+,
+ enable(1)
+
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Enables / disables the automatic update mechanism for the cmp
+file.
+
+0 = The automatic update mechanism doesn't apply to the cmp
+file (default).
+1 = The automatic update mechanism includes the cmp file.
+Access: Online.
+AC INI-Param: AutoUpdateCmpFile"
+ ::= {acSysHTTPClient 3}
+
+
+
+ acSysHTTPClientCmpFileURL OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..254))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This parameter provides a link to a software image (CMP file)
+to be downloaded from a remote server.
+.
+Access: Offline.
+AC INI-Param: CmpFileURL"
+ ::= {acSysHTTPClient 4}
+
+
+
+ acSysHTTPClientIniFileURL OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..254))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This parameter provides a link to an ini file to be downloaded
+from a remote server.
+.
+Access: Offline.
+AC INI-Param: IniFileURL"
+ ::= {acSysHTTPClient 5}
+
+
+
+ acSysHTTPClientIniFileTemplateURL OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..254))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Provides a link to an ini file to be downloaded from a remote
+server, in addition to IniFileUrl.
+Range = http://server_name/file, https://server_name/file.
+Access: Offline.
+AC INI-Param: IniFileTemplateUrl"
+ ::= {acSysHTTPClient 6}
+
+
+
+ acSysHTTPClientCPTFileURL OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..254))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Provides a link to a Call Progress Tones (CPT) file to be downloaded
+from a remote server.
+Range = http://server_name/file, https://server_name/file.
+Access: Offline.
+AC INI-Param: CptFileUrl"
+ ::= {acSysHTTPClient 7}
+
+
+
+ acSysHTTPClientVPFileURL OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..254))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Provides a link to a Voice Prompts file to be downloaded from
+a remote server.
+Range = http://server_name/file, https://server_name/file.
+Access: Online.
+AC INI-Param: VpFileUrl"
+ ::= {acSysHTTPClient 8}
+
+
+
+ acSysHTTPClientPRTFileURL OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..254))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Provides a link to a prerecorded tones dat file, to be downloaded
+from a remote server.
+Range = http://server_name/file, https://server_name/file.
+Access: Online.
+AC INI-Param: PrtFileUrl"
+ ::= {acSysHTTPClient 9}
+
+
+
+ acSysHTTPClientFXSCoeffFileURL OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..254))
+ MAX-ACCESS read-write
+ STATUS deprecated
+ DESCRIPTION
+ "Provides a link to an FXS coefficients file, to be downloaded
+from a remote server.
+Range = http://server_name/file, https://server_name/file.
+Access: Instant.
+AC INI-Param: FXSCoeffFileUrl"
+ ::= {acSysHTTPClient 10}
+
+
+
+ acSysHTTPClientFXOCoeffFileURL OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..254))
+ MAX-ACCESS read-write
+ STATUS deprecated
+ DESCRIPTION
+ "Provides a link to an FXO coefficients file, to be downloaded
+from a remote server.
+Range = http://server_name/file, https://server_name/file.
+Access: Instant.
+AC INI-Param: FXOCoeffFileUrl"
+ ::= {acSysHTTPClient 11}
+
+
+
+ acSysHTTPClientCASFileURL OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..254))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Provides a link to a Channel Associated Signaling (CAS) file
+to be downloaded from a remote server.
+Range = http://server_name/file, https://server_name/file.
+Access: Online.
+AC INI-Param: CasFileUrl"
+ ::= {acSysHTTPClient 12}
+
+
+
+ acSysHTTPClientXMLFileUrl OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..254))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Provides a link to an XML segments file, to be downloaded from
+a remote server.
+See the chapter 'Automatic Update Facility' for supported URL
+options.
+Access: Online.
+AC INI-Param: APSSegmentsFileUrl "
+ ::= {acSysHTTPClient 13}
+
+
+
+ acSysHTTPClientCoderTableFileUrl OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..254))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Provides a link to a coder table (CTBL) file that is to be downloaded
+from a remote server.
+.
+Access: Online.
+AC INI-Param: CoderTableFileUrl"
+ ::= {acSysHTTPClient 14}
+
+
+
+ acSysHTTPClientUserInfoFileURL OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..254))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Provides a link to the user information file, to be downloaded
+using Automatic Update.
+Relevant only for H323 or SIP controlled devices.
+Access: Online.
+AC INI-Param: UserInfoFileUrl"
+ ::= {acSysHTTPClient 15}
+
+
+
+ acSysHTTPClientDialPlanFileURL OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..254))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "URL for downloading a Dial Plan file using the Automatic Update
+facility.
+Access: Online.
+AC INI-Param: DialPlanFileUrl"
+ ::= {acSysHTTPClient 16}
+
+
+
+ acSysHTTPClientTLSPkeyFileUrl OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..254))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "URL for downloading a TLS private key file using the Automatic
+Update facility.
+Access: Offline.
+AC INI-Param: TLSPkeyFileUrl"
+ ::= {acSysHTTPClient 17}
+
+
+
+ acSysHTTPClientTLSCertFileUrl OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..254))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "URL for downloading a TLS certificate file using the Automatic
+Update facility.
+Access: Offline.
+AC INI-Param: TLSCertFileUrl"
+ ::= {acSysHTTPClient 18}
+
+
+
+ acSysHTTPClientTLSRootFileUrl OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..254))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "URL for downloading a TLS trusted root certificate file using
+the Automatic Update facility.
+Access: Offline.
+AC INI-Param: TLSRootFileUrl"
+ ::= {acSysHTTPClient 19}
+
+
+
+ acSysHTTPClientWebLogoFileUrl OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..254))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "URL for downloading a logo file for the web interface using
+the Automatic Update facility.
+Access: Online.
+AC INI-Param: WebLogoFileUrl"
+ ::= {acSysHTTPClient 20}
+
+
+
+ acSysHTTPClientVideoFontFileURL OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..254))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Indicates the URL for downloading a logo file for the web interface
+using the Automatic Update facility.
+Access: Online.
+AC INI-Param: VideoFontFileUrl"
+ ::= {acSysHTTPClient 21}
+
+
+
+ acSysHTTPClientV5PortConfFileURL OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..254))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Provides a link to a software (V5PortConfiguration file) to
+be downloaded from a remote server.
+Access: Online.
+AC INI-Param: V5PortConfigurationFileURL"
+ ::= {acSysHTTPClient 22}
+
+
+
+ acSysHTTPClientDataConfigurationFileUrl OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..254))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Provides a link to a data configuration file to be downloaded
+from a remote server using the Automatic Update facility.
+Access: Offline.
+AC INI-Param: RGCONFFILEURL"
+ ::= {acSysHTTPClient 23}
+
+
+
+ acSysHTTPClientAmdSensitivityFileUrl OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..254))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Provides a link to the AMD Sensitivity file to be downloaded
+from a remote server.
+Access: Online.
+AC INI-Param: AmdSensitivityFileUrl"
+ ::= {acSysHTTPClient 24}
+
+
+
+ acSysSNMP OBJECT IDENTIFIER ::= {acSysNetworkConfig 9}
+
+
+ acSysSNMPKeepAliveTrapPort OBJECT-TYPE
+ SYNTAX Unsigned32 (0..65334)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The port to which the keep alive traps are sent to.
+Access: Instant.
+AC INI-Param: KeepAliveTrapPort"
+ ::= {acSysSNMP 1}
+
+
+
+ acSysSNMPEmsColdStrartIndication OBJECT-TYPE
+ SYNTAX Unsigned32 (0..2147483647)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "EMS object to be used as indication to the device's state in
+the 'eyes' of the EMS.
+ Default - 0.
+Access: Instant.
+AC INI-Param: N/A"
+ ::= {acSysSNMP 2}
+
+
+
+ acSysSNMPWanPort OBJECT-TYPE
+ SYNTAX Unsigned32 (0..65535)
+ MAX-ACCESS read-write
+ STATUS obsolete
+ DESCRIPTION
+ "This parameter specifies the WAN port number for SNMP requests
+and responses. If set to 0, WAN access to SNMP is disabled.
+
+Range = 0 to 65535.
+Access: Offline.
+AC INI-Param: WanMgmtSnmpPort"
+ ::= {acSysSNMP 3}
+
+
+
+ acSysSNMPAllowWanSnmp OBJECT-TYPE
+ SYNTAX INTEGER {
+ disable(0)
+,
+ enable(1)
+
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Enables or disables WAN access to the management interface via
+SNMP.
+Access: Offline.
+AC INI-Param: AllowWanSnmp"
+ ::= {acSysSNMP 4}
+
+
+
+ acSysVLAN OBJECT IDENTIFIER ::= {acSysNetworkConfig 10}
+
+
+ acSysVLANOamVlanId OBJECT-TYPE
+ SYNTAX Unsigned32 (1..4094)
+ MAX-ACCESS read-write
+ STATUS obsolete
+ DESCRIPTION
+ "Sets the OAMP (Operation, Administration, Management and Provisioning)
+VLAN identifier.
+
+Range: 1 to 4094.
+Access: Online.
+AC INI-Param: VLANOAMVLANID"
+ ::= {acSysVLAN 1}
+
+
+
+ acSysVLANControlVlanId OBJECT-TYPE
+ SYNTAX Unsigned32 (1..4094)
+ MAX-ACCESS read-write
+ STATUS obsolete
+ DESCRIPTION
+ "Sets the control VLAN identifier.
+
+Range: 1 to 4094.
+Access: Online.
+AC INI-Param: VLANCONTROLVLANID"
+ ::= {acSysVLAN 2}
+
+
+
+ acSysVLANMediaVlanId OBJECT-TYPE
+ SYNTAX Unsigned32 (1..4094)
+ MAX-ACCESS read-write
+ STATUS obsolete
+ DESCRIPTION
+ "Sets the media VLAN identifier.
+
+Range: 1 to 4094.
+Access: Online.
+AC INI-Param: VLANMEDIAVLANID"
+ ::= {acSysVLAN 3}
+
+
+
+ acSysVLANNetworkServiceClassPriority OBJECT-TYPE
+ SYNTAX Unsigned32 (0..7)
+ MAX-ACCESS read-write
+ STATUS deprecated
+ DESCRIPTION
+ "This parameter is used to set the priority for Network service
+class content.
+
+Range = 0 to 7
+Default = 7.
+Access: Online.
+AC INI-Param: VLANNETWORKSERVICECLASSPRIORITY"
+ ::= {acSysVLAN 4}
+
+
+
+ acSysVLANPremiumServiceClassMediaPriority OBJECT-TYPE
+ SYNTAX Unsigned32 (0..7)
+ MAX-ACCESS read-write
+ STATUS deprecated
+ DESCRIPTION
+ "Sets the priority for the Premium service class content and
+media traffic.
+Range = 0 to 7
+Default = 6.
+Access: Online.
+AC INI-Param: VLANPREMIUMSERVICECLASSMEDIAPRIORITY"
+ ::= {acSysVLAN 5}
+
+
+
+ acSysVLANGoldServiceClassPriority OBJECT-TYPE
+ SYNTAX Unsigned32 (0..7)
+ MAX-ACCESS read-write
+ STATUS deprecated
+ DESCRIPTION
+ "Sets the priority for the Gold service class content.
+
+Range = 0 to 7
+Default = 4.
+Access: Online.
+AC INI-Param: VLANGOLDSERVICECLASSPRIORITY"
+ ::= {acSysVLAN 6}
+
+
+
+ acSysVLANBronzeServiceClassPriority OBJECT-TYPE
+ SYNTAX Unsigned32 (0..7)
+ MAX-ACCESS read-write
+ STATUS deprecated
+ DESCRIPTION
+ "Sets the priority for the Bronze service class content.
+
+Range = 0 to 7
+Default = 2.
+Access: Online.
+AC INI-Param: VLANBRONZESERVICECLASSPRIORITY"
+ ::= {acSysVLAN 7}
+
+
+
+ acSysVLANPremiumServiceClassControlPriority OBJECT-TYPE
+ SYNTAX Unsigned32 (0..7)
+ MAX-ACCESS read-write
+ STATUS deprecated
+ DESCRIPTION
+ "Sets the priority for the Premium service class content and
+control traffic.
+
+Range = 0 to 7
+Default = 6.
+Access: Online.
+AC INI-Param: VLANPREMIUMSERVICECLASSCONTROLPRIORITY"
+ ::= {acSysVLAN 8}
+
+
+
+ acSysVLANNetworkServiceClassDiffServ OBJECT-TYPE
+ SYNTAX Unsigned32 (0..63)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This parameter is used to set the DiffServ for Network service
+class content.
+
+Range = 0 to 63
+Default = 48.
+Access: Online.
+AC INI-Param: NETWORKSERVICECLASSDIFFSERV"
+ ::= {acSysVLAN 9}
+
+
+
+ acSysVLANPremiumServiceClassMediaDiffServ OBJECT-TYPE
+ SYNTAX Unsigned32 (0..63)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This parameter is used to set the DiffServ for Premium service
+class content and media traffic.
+
+Range = 0 to 63.
+Access: Online.
+AC INI-Param: PREMIUMSERVICECLASSMEDIADIFFSERV"
+ ::= {acSysVLAN 10}
+
+
+
+ acSysVLANPremiumServiceClassControlDiffServ OBJECT-TYPE
+ SYNTAX Unsigned32 (0..63)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Sets the DiffServ for the Premium service class content and
+control traffic.
+
+Range: 0 to 63.
+Access: Online.
+AC INI-Param: PREMIUMSERVICECLASSCONTROLDIFFSERV"
+ ::= {acSysVLAN 11}
+
+
+
+ acSysVLANGoldServiceClassDiffServ OBJECT-TYPE
+ SYNTAX Unsigned32 (0..63)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Sets the DiffServ for the Gold service class content.
+
+Range = 0 to 63
+Default = 26.
+Access: Online.
+AC INI-Param: GOLDSERVICECLASSDIFFSERV"
+ ::= {acSysVLAN 12}
+
+
+
+ acSysVLANBronzeServiceClassDiffServ OBJECT-TYPE
+ SYNTAX Unsigned32 (0..63)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Sets the DiffServ for the Bronze service class content.
+
+Range = 0 to 63
+Default = 10.
+Access: Online.
+AC INI-Param: BRONZESERVICECLASSDIFFSERV"
+ ::= {acSysVLAN 13}
+
+
+
+ acSysVLANVlanNativeVlanId OBJECT-TYPE
+ SYNTAX Unsigned32 (1..4094)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Sets the native VLAN identifier.
+Access: Online.
+AC INI-Param: VLANNATIVEVLANID"
+ ::= {acSysVLAN 14}
+
+
+
+ acSysVLANMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ disable(0)
+,
+ enable(1)
+
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Sets the VLAN functionality.
+
+0 = Disable
+1 = Enable.
+Access: Offline.
+AC INI-Param: VLANMODE"
+ ::= {acSysVLAN 15}
+
+
+
+ -- ****************************************
+ -- acSysVlanMap table declaration
+ -- ****************************************
+ acSysVlanMapTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AcSysVlanMapEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ ""
+ ::= {acSysVLAN 21}
+
+
+
+ -- ****************************************
+ -- acSysVlanMap table entry
+ -- ****************************************
+ acSysVlanMapEntry OBJECT-TYPE
+ SYNTAX AcSysVlanMapEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ ""
+ INDEX {acSysVlanMapIndex}
+ ::= {acSysVlanMapTable 1}
+
+
+
+ -- ****************************************
+ -- acSysVlanMap TABLE
+ -- ****************************************
+ AcSysVlanMapEntry ::= SEQUENCE {
+ acSysVlanMapIndex Unsigned32,
+ acSysVlanMapRowStatus RowStatus,
+ acSysVlanMapAction INTEGER,
+ acSysVlanMapActionRes INTEGER,
+ acSysVlanMapDiffServ Unsigned32,
+ acSysVlanMapVlanPriority Unsigned32
+ }
+
+
+
+ acSysVlanMapIndex OBJECT-TYPE
+ SYNTAX Unsigned32 (0..63)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Index Field for line. Internal parameter.
+AC INI-Param: DiffServToVlanPriority_Index"
+ ::= {acSysVlanMapEntry 1}
+
+
+
+ acSysVlanMapRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "ROWSTATUS field for line. Internal parameter.
+AC INI-Param: N/A"
+ ::= {acSysVlanMapEntry 2}
+
+
+
+ acSysVlanMapAction OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(0)
+
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Mangement Field for ACTIONS. Internal parameter.
+AC INI-Param: N/A"
+ ::= {acSysVlanMapEntry 3}
+
+
+
+ acSysVlanMapActionRes OBJECT-TYPE
+ SYNTAX INTEGER {
+ succeeded(0)
+
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Mangement Field for ACTIONS RESULT. Internal parameter.
+AC INI-Param: N/A"
+ ::= {acSysVlanMapEntry 4}
+
+
+
+ acSysVlanMapDiffServ OBJECT-TYPE
+ SYNTAX Unsigned32 (0..63)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Mapping of DiffServ (DSCP) to Vlan Priorities (IEEE 802.1p).
+Access: Online.
+AC INI-Param: DiffServToVlanPriority_DiffServ"
+ ::= {acSysVlanMapEntry 5}
+
+
+
+ acSysVlanMapVlanPriority OBJECT-TYPE
+ SYNTAX Unsigned32 (0..7)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Mapping of DiffServ (DSCP) to Vlan Priorities (IEEE 802.1p).
+Access: Online.
+AC INI-Param: DiffServToVlanPriority_VlanPriority"
+ ::= {acSysVlanMapEntry 6}
+
+
+
+ acSysSCTP OBJECT IDENTIFIER ::= {acSysNetworkConfig 11}
+
+
+ acSysSCTPHeartBeatInterval OBJECT-TYPE
+ SYNTAX Unsigned32 (0..3600)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Defines the SCTP heartbeat interval.
+
+Range: 1 to 3600.
+Access: Offline.
+AC INI-Param: SCTPHBInterval"
+ ::= {acSysSCTP 1}
+
+
+
+ acSysSCTPT4SACKTimer OBJECT-TYPE
+ SYNTAX Unsigned32 (1..5)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Defines the SCTP T4 SACK timer interval.
+
+Range: 1 to 5.
+Access: Offline.
+AC INI-Param: SCTPT4SAckTimer"
+ ::= {acSysSCTP 2}
+
+
+
+ acSysSCTPCheckSumMethod OBJECT-TYPE
+ SYNTAX INTEGER {
+ adler(0)
+,
+ crc(1)
+
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Stream Control Transmission Protocol (SCTP) uses a checksum
+mechanism in order to authenticate packets on both sides (the
+receiving side and the transmitting side).
+
+Presently, two checksum mechanisms are available:
+
+0 = adler32 checksum mechanism
+1 = crc32c checksum mechanism (improved mechanism).
+Access: Offline.
+AC INI-Param: SCTPChecksumMethod"
+ ::= {acSysSCTP 3}
+
+
+
+ acSysSCTPHostName OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..255))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "When this parameter is set to any value other than an empty
+string, SCTP (Stream Control Transmission Protocol) uses the
+value as the value of the FQDN (Fully Qualified Domain Name)
+parameter attached to the INIT chunk. In this case, the FQDN
+parameter replaces any IP address parameters in the INIT
+chunk.
+
+This feature enables overcoming NAT problems where the original
+IP addresses belonging to the endpoint supports are converted
+into pseudo addresses. When this parameter is not set
+(default), the INIT chunk is sent without any FQDN parameter.
+
+Range = String[42].
+Access: Offline.
+AC INI-Param: SCTPHOSTNAME"
+ ::= {acSysSCTP 4}
+
+
+
+ acSysSCTPAssociationsNum OBJECT-TYPE
+ SYNTAX Unsigned32 (1..8)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Defines the maximum number of Stream Control Transmission Protocol
+(SCTP) associations that can be opened.
+
+Range: 1 to 8.
+Access: Offline.
+AC INI-Param: SCTPAssociationsNum"
+ ::= {acSysSCTP 5}
+
+
+
+ acSysEthernetPort OBJECT IDENTIFIER ::= {acSysNetworkConfig 12}
+
+
+ acSysEthernetPortPhyConfiguration OBJECT-TYPE
+ SYNTAX INTEGER {
+ halfDuplex10BaseT(0)
+,
+ fullDuplex10BaseT(1)
+,
+ halfDuplex100BaseT(2)
+,
+ fullDuplex100BaseT(3)
+,
+ autoNegotiate(4)
+,
+ fullDuplex1000BaseT(7)
+
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Controls the Ethernet connection mode type. Auto-negotiate falls
+back to Half-Duplex mode (HD) when the opposite port is
+not in Auto-negotiate mode. The speed (10 Base-T or 100 Base-TX)
+in this mode is always configured correctly.
+
+0 = 10 Base-T half-duplex
+1 = 10 Base-T full-duplex
+2 = 100 Base-TX half-duplex
+3 = 100 Base-TX full-duplex
+4 = Auto-negotiate.
+Access: Offline.
+AC INI-Param: EthernetPhyConfiguration"
+ ::= {acSysEthernetPort 1}
+
+
+
+ acSysPOE OBJECT IDENTIFIER ::= {acSysEthernetPort 21}
+
+
+ -- ****************************************
+ -- acSysPOE table declaration
+ -- ****************************************
+ acSysPOETable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AcSysPOEEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ ""
+ ::= {acSysPOE 1}
+
+
+
+ -- ****************************************
+ -- acSysPOE table entry
+ -- ****************************************
+ acSysPOEEntry OBJECT-TYPE
+ SYNTAX AcSysPOEEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ ""
+ INDEX {acSysPOEIndex}
+ ::= {acSysPOETable 1}
+
+
+
+ -- ****************************************
+ -- acSysPOE TABLE
+ -- ****************************************
+ AcSysPOEEntry ::= SEQUENCE {
+ acSysPOEIndex Unsigned32,
+ acSysPOERowStatus RowStatus,
+ acSysPOEAction INTEGER,
+ acSysPOEActionRes INTEGER,
+ acSysPOEPortEnable INTEGER,
+ acSysPOEPortPower Unsigned32,
+ acSysPOEPortATEnable INTEGER
+ }
+
+
+
+ acSysPOEIndex OBJECT-TYPE
+ SYNTAX Unsigned32 (0..11)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This parameter is used for the Power Over Ethenet (PoE) Index
+Field for line. Internal parameter.
+AC INI-Param: POETable_Index"
+ ::= {acSysPOEEntry 1}
+
+
+
+ acSysPOERowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Power Over Ethenet (PoE) ROWSTATUS field for line. Internal
+parameter.
+Access: Offline.
+AC INI-Param: POETable_RowStatus"
+ ::= {acSysPOEEntry 2}
+
+
+
+ acSysPOEAction OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(0)
+
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Power Over Ethenet (PoE) Mangement Field for ACTIONS. Internal
+parameter.
+Access: Offline.
+AC INI-Param: POETable_Action"
+ ::= {acSysPOEEntry 3}
+
+
+
+ acSysPOEActionRes OBJECT-TYPE
+ SYNTAX INTEGER {
+ succeeded(0)
+
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Power Over Ethenet (PoE) Mangement Field for ACTIONS RESULT.
+Internal parameter.
+AC INI-Param: POETable_ActionRes"
+ ::= {acSysPOEEntry 4}
+
+
+
+ acSysPOEPortEnable OBJECT-TYPE
+ SYNTAX INTEGER {
+ disable(0)
+,
+ enable(1)
+
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This parameter is used for Power Over Ethenet (PoE) - enable/diasble
+port PoE.
+Access: Offline.
+AC INI-Param: POETable_PortEnable"
+ ::= {acSysPOEEntry 5}
+
+
+
+ acSysPOEPortPower OBJECT-TYPE
+ SYNTAX Unsigned32 (4000..30000)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This parameter is used for Power Over Ethenet (PoE) - Port Power[mW].
+Access: Offline.
+AC INI-Param: POETable_PortPower"
+ ::= {acSysPOEEntry 6}
+
+
+
+ acSysPOEPortATEnable OBJECT-TYPE
+ SYNTAX INTEGER {
+ disable(0)
+,
+ enable(1)
+
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This parameter is used to show if working in mode IEEE 802.3AF
+(0) or IEEE 802.3AT (1).
+Access: Offline.
+AC INI-Param: POETable_PortATEnable"
+ ::= {acSysPOEEntry 7}
+
+
+
+ acSysNetworkSettings OBJECT IDENTIFIER ::= {acSysNetworkConfig 13}
+
+
+ acSysNetworkSettingsDisableICMPRedirects OBJECT-TYPE
+ SYNTAX INTEGER {
+ disable(0)
+,
+ enable(1)
+
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Disable ICMP Redirect messages. When set to 0 ICMP Redirect
+messages are not ignored.
+Access: Instant.
+AC INI-Param: DisableICMPRedirects"
+ ::= {acSysNetworkSettings 1}
+
+
+
+ acSysSTUN OBJECT IDENTIFIER ::= {acSysNATTraversal 21}
+
+
+ acSysSTUNEnable OBJECT-TYPE
+ SYNTAX INTEGER {
+ disable(0)
+,
+ enable(1)
+
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This parameter is used to enable the STUN module, used for NAT
+traversal of UDP packets.
+Access: Offline.
+AC INI-Param: ENABLESTUN"
+ ::= {acSysSTUN 1}
+
+
+
+ acSysSTUNPrimaryServerIP OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Defines the primary STUN Server IP address.
+Range = Legal IP address.
+Access: Offline.
+AC INI-Param: STUNSERVERPRIMARYIP"
+ ::= {acSysSTUN 2}
+
+
+
+ acSysSTUNSecondaryServerIP OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Defines the secondary STUN server IP address.
+Range = Legal IP address.
+Access: Offline.
+AC INI-Param: STUNSERVERSECONDARYIP"
+ ::= {acSysSTUN 3}
+
+
+
+ acSysSTUNBindingLifeTime OBJECT-TYPE
+ SYNTAX Unsigned32 (0..2147483647)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This parameter is used to define the NAT binding lifetime, in
+seconds. STUN refreshes the binding information after this
+time expires.
+Range = 0 - 2592000.
+Access: Offline.
+AC INI-Param: NATBINDINGDEFAULTTIMEOUT"
+ ::= {acSysSTUN 4}
+
+
+
+ acSysMiscConfig OBJECT IDENTIFIER ::= {acSystemConfiguration 4}
+
+
+ acSysDiagnostics OBJECT IDENTIFIER ::= {acSysMiscConfig 1}
+
+
+ acSysDiagnosticsEnable OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0)
+,
+ builtInTest(1)
+,
+ builtInTestwithPartialFlash(2)
+,
+ builtInTestWithSDRAM(3)
+,
+ builtInTestOnUtopiaVxb(4)
+,
+ internalUse(99)
+
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Checks the correct functionality of the different hardware components
+on the board. On completion of the check, the board
+sends an EV_END_BIT value, which contains information on the
+test results of each hardware component.
+
+0 = No diagnostics (default)
+1 = Perform diagnostics (full test of DSPs, PCM, Switch, LAN,
+PHY and Flash)
+2 = Perform diagnostics (full test of DSPs, PCM, Switch, LAN,
+PHY, but partial, test of Flash, a quicker mode).
+Access: Offline.
+AC INI-Param: ENABLEDIAGNOSTICS"
+ ::= {acSysDiagnostics 1}
+
+
+
+ acSysDiagnosticsEnablePerformanceThresholdAlarms OBJECT-TYPE
+ SYNTAX INTEGER {
+ disable(0)
+,
+ enable(1)
+
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This parameter enables sending SNMP traps and Syslog messages
+when performance of the device is degraded (according to the
+configured thresholds).
+Access: Instant.
+AC INI-Param: PM_EnableThresholdAlarms"
+ ::= {acSysDiagnostics 2}
+
+
+
+ acSysDiagnosticsListOfActivitiesToLog OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..32))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This parameter defines what activities are to be reported by
+the device in the form of a log message. Parameter format is
+ x,y,z-... where x,y,z are activity codes to be reported by
+the device.
+Supported activity codes:
+PVC - Parameter Value Changes.
+AFL - Auxiliary Files Loading.
+DR - Device Reset.
+FB - Flash Burning.
+SWU - SoftWareUpdate.
+ARD - Access to Restricted Domains.
+NAA - Non Authorized Access.
+SPC - Sensitive Parameters Changes.
+Access: Online.
+AC INI-Param: ActivityListToLog"
+ ::= {acSysDiagnostics 3}
+
+
+
+ acSysGenericINI OBJECT IDENTIFIER ::= {acSysMiscConfig 2}
+
+
+ acSysGenericINILine OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..512))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Flexible INI file line.
+to enter more than one line, use '$@$' between lines.
+Access: Offline.
+AC INI-Param: N/A"
+ ::= {acSysGenericINI 1}
+
+
+
+ acSysGenericINISecureStartup OBJECT-TYPE
+ SYNTAX INTEGER {
+ disable(0)
+,
+ enable(1)
+
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Enables or disables secure startup mode. In this mode, downloading
+of the INI file is restricted to a URL provided in prior
+configuration (see parameter IniFileURL) or via DHCP.
+Access: Offline.
+AC INI-Param: EnableSecureStartup"
+ ::= {acSysGenericINI 2}
+
+
+
+ acSysGenericCli OBJECT IDENTIFIER ::= {acSysMiscConfig 3}
+
+
+ acSysGenericCliCommand OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..512))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "send CLI command.
+Access: Instant.
+AC INI-Param: N/A"
+ ::= {acSysGenericCli 1}
+
+
+
+ acSysGenericCliCommandResponse OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..512))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "get CLI command response.
+AC INI-Param: N/A"
+ ::= {acSysGenericCli 2}
+
+
+
+ acSysLicenseKey OBJECT IDENTIFIER ::= {acSystemConfiguration 5}
+
+
+ acSysLicenseKeyString OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..256))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Coded Key specific for board and required features.
+Access: Offline.
+AC INI-Param: N/A"
+ ::= {acSysLicenseKey 1}
+
+
+
+ acSysLicenseKeyActiveList OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..484))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "List of all avtivated features.
+AC INI-Param: N/A"
+ ::= {acSysLicenseKey 2}
+
+
+
+ acSysFile OBJECT IDENTIFIER ::= {acSystemConfiguration 6}
+
+
+ acSysFileCpt OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..47))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Defines Call Progress Tone filenames (downloaded by TFTP).
+AC INI-Param: CALLPROGRESSTONESFILENAME"
+ ::= {acSysFile 1}
+
+
+
+ acSysFileVp OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..47))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Defines the name (and path) of the file containing the Voice
+Prompts.
+
+Range = String of ASCII characters.
+AC INI-Param: VOICEPROMPTSFILENAME"
+ ::= {acSysFile 2}
+
+
+
+ acSysFilePrerecordedTones OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..47))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Defines the name (and path) of the file containing the Prerecorded
+Tones.
+Range = String of ASCII characters.
+AC INI-Param: PrerecordedTonesFileName"
+ ::= {acSysFile 3}
+
+
+
+ acSysFileXml OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..47))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This parameter is used to indicate the name of the file containing
+the XML file.
+AC INI-Param: XMLFileName"
+ ::= {acSysFile 4}
+
+
+
+ acSysFileExternalCoder OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..47))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This parameter defines the name of an external coders table.
+In this table, the user can decide which coders will be used
+in the system. The original file is a text file, and it is
+converted by DCONVERT to a bynary file.
+AC INI-Param: CODERTBLFILENAME"
+ ::= {acSysFile 5}
+
+
+
+ acSysFileUserInfo OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..47))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The file name to be loaded.
+AC INI-Param: N/A"
+ ::= {acSysFile 6}
+
+
+
+ acSysFileDialPlanFileName OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..47))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This parameter is used to indicate the name of the file containing
+the Dial Plan.
+AC INI-Param: gDialPlanFileName"
+ ::= {acSysFile 7}
+
+
+
+ acSysFileTLSPkeyFileName OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..47))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This parameter defines the name of a private key file (internal).
+Set to blank to regenerate the key and certificate.
+AC INI-Param: HTTPSPkeyFileName"
+ ::= {acSysFile 8}
+
+
+
+ acSysFileTLSCertFileName OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..47))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Defines the name of the HTTPS server certificate file to be
+downloaded via TFTP. The file must be in base64-encoded PEM
+format.
+Range = String[47].
+AC INI-Param: HTTPSCertFileName"
+ ::= {acSysFile 9}
+
+
+
+ acSysFileTLSRootFileName OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..47))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Defines the name of the HTTPS trusted root certificate file
+to be downloaded via TFTP. The file must be in base64-encoded
+PEM format.
+Range = String[47].
+AC INI-Param: HTTPSRootFileName"
+ ::= {acSysFile 10}
+
+
+
+ acSysFileFirstVideoFontFileName OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..47))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates the name of the first file containing the Video Font
+file index.
+AC INI-Param: VideoFontFIleName"
+ ::= {acSysFile 11}
+
+
+
+ acSysFileSecondVideoFontFileName OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..47))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates the name of the second file containing the Video Font
+file index.
+AC INI-Param: VideoFontFIleName"
+ ::= {acSysFile 12}
+
+
+
+ acSysFileThirdVideoFontFileName OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..47))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates the name of the first file containing the Video Font
+file index.
+AC INI-Param: VideoFontFIleName"
+ ::= {acSysFile 13}
+
+
+
+ acSysFileV5PortConfFileName OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..47))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates the name and location of the V5 Port Configuration
+file.
+AC INI-Param: V5PortConfigurationFileName"
+ ::= {acSysFile 14}
+
+
+
+ acSysFileAmdSensitivityFileName OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..47))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Name of the AMD Sensitivity auxiliary file.
+AC INI-Param: AmdSensitivityFileName"
+ ::= {acSysFile 15}
+
+
+
+ acSysSecurity OBJECT IDENTIFIER ::= {acSystemConfiguration 7}
+
+
+ acSysSecurityTLSVersion OBJECT-TYPE
+ SYNTAX INTEGER {
+ sSL-2-3-and-TLS-1(0)
+,
+ tLS-1-only(1)
+
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This parameter defines the supported versions of SSL/TLS.
+When set to 0, SSL/TLS handshakes always start with SSL 2.0
+and switch to TLS 1.0 if both peers support it.
+When set to 1, TLS 1.0 is the only version supported
+ clients attempting to contact the device using SSL 2.0 will
+be rejected.
+
+Possible values:
+0 = SSL 2.0, SSL 3.0, and TLS 1.0 are supported (default)
+1 = TLS 1.0 will always be used.
+Access: Online.
+AC INI-Param: TLSVersion"
+ ::= {acSysSecurity 1}
+
+
+
+ acSysSecurityOcspEnable OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0)
+,
+ enabled(1)
+
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Enables or disables certificate checking via OCSP.
+Access: Instant.
+AC INI-Param: OcspEnable"
+ ::= {acSysSecurity 2}
+
+
+
+ acSysSecurityOcspServerIPType OBJECT-TYPE
+ SYNTAX InetAddressType
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This parameter defines the OCSP server's IP address Type.
+0 - unknown
+1 - IPv4
+2 - IPv6.
+Access: Instant.
+AC INI-Param: N/A"
+ ::= {acSysSecurity 3}
+
+
+
+ acSysSecurityOcspServerIP OBJECT-TYPE
+ SYNTAX InetAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This parameter defines the OCSP server's IP address.
+Range = Legal IP address.
+Access: Instant.
+AC INI-Param: OcspServerIP"
+ ::= {acSysSecurity 4}
+
+
+
+ acSysSecurityOcspServerPort OBJECT-TYPE
+ SYNTAX Unsigned32 (1..32767)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This parameter defines the OCSP server's TCP port number.
+Range = 1 to 32767.
+Access: Instant.
+AC INI-Param: OcspServerPort"
+ ::= {acSysSecurity 5}
+
+
+
+ acSysSecurityOcspDefaultResponse OBJECT-TYPE
+ SYNTAX INTEGER {
+ rejectPeerCertificate(0)
+,
+ allowPeerCertificate(1)
+
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Determines default OCSP behavior when the server cannot be contacted.
+0 = reject peer certificate.
+1 = allow peer certificate.
+.
+Access: Instant.
+AC INI-Param: OcspDefaultResponse"
+ ::= {acSysSecurity 6}
+
+
+
+ acSysSecurityTLSFIPS140Mode OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0)
+,
+ enabled(1)
+
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Determines whether to enable the FIPS140 mode for TLS.
+Access: Offline.
+AC INI-Param: TLS_Fips140_Mode"
+ ::= {acSysSecurity 7}
+
+
+
+ acSysSecurityGenCsrSubjectName OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..600))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "generate CSR Subject Name.
+Access: Instant.
+AC INI-Param: N/A"
+ ::= {acSysSecurity 8}
+
+
+
+ acSysSecuritySelfSignedCertificateSubjectName OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..64))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "
+Access: Instant.
+AC INI-Param: N/A"
+ ::= {acSysSecurity 9}
+
+
+
+ acSysSecurityOcspSecondaryServerIPType OBJECT-TYPE
+ SYNTAX InetAddressType
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This parameter defines the OCSP secondary server's IP address
+Type.
+0 - unknown
+1 - IPv4
+2 - IPv6.
+Access: Instant.
+AC INI-Param: N/A"
+ ::= {acSysSecurity 10}
+
+
+
+ acSysSecurityOcspSecondaryServerIP OBJECT-TYPE
+ SYNTAX InetAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This parameter defines the OCSP secondary server IP address.
+Range = Legal IP address.
+Access: Instant.
+AC INI-Param: OcspSecondaryServerIP"
+ ::= {acSysSecurity 11}
+
+
+
+ acSysSecurityHTTPSRequireClientCertificate OBJECT-TYPE
+ SYNTAX INTEGER {
+ disable(0)
+,
+ enable(1)
+
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Requires client certificates for HTTPS connection.
+The client certificate must be preloaded on the gateway, and
+its matching private key must be installed on the managing
+computer.
+Time and date must be correctly set on the gateway, for the
+client certificate to be verified.
+Access: Online.
+AC INI-Param: HTTPSRequireClientCertificate"
+ ::= {acSysSecurity 12}
+
+
+
+ acSysSecurityAUPDVerifyCertificates OBJECT-TYPE
+ SYNTAX INTEGER {
+ disable(0)
+,
+ enable(1)
+
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This parameter configures the AutoUpdate facility to verify
+server certificates when using HTTPS.
+Access: Online.
+AC INI-Param: AUPDVerifyCertificates"
+ ::= {acSysSecurity 13}
+
+
+
+ acSysSecurityRequireStrictCertification OBJECT-TYPE
+ SYNTAX INTEGER {
+ disable(0)
+,
+ enable(1)
+
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Verify the certification strictly - for SSL.
+Access: Online.
+AC INI-Param: RequireStrictCert"
+ ::= {acSysSecurity 14}
+
+
+
+ acSysSecurityTLSExpiryCheckStart OBJECT-TYPE
+ SYNTAX Unsigned32 (0..3650)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The system will report when the TLS server certificate is about
+to expire within this number of days.
+Access: Instant.
+AC INI-Param: TLSExpiryCheckStart"
+ ::= {acSysSecurity 15}
+
+
+
+ acSysSecurityTLSExpiryCheckPeriod OBJECT-TYPE
+ SYNTAX Unsigned32 (1..3650)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Defines how often the system will check for TLS server certificate
+expiry (in days).
+Access: Instant.
+AC INI-Param: TLSExpiryCheckPeriod"
+ ::= {acSysSecurity 16}
+
+
+
+ acSysIKE OBJECT IDENTIFIER ::= {acSysSecurity 21}
+
+
+ -- ****************************************
+ -- acSysIKEPolicy table declaration
+ -- ****************************************
+ acSysIKEPolicyTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AcSysIKEPolicyEntry
+ MAX-ACCESS not-accessible
+ STATUS obsolete
+ DESCRIPTION
+ ""
+ ::= {acSysIKE 1}
+
+
+
+ -- ****************************************
+ -- acSysIKEPolicy table entry
+ -- ****************************************
+ acSysIKEPolicyEntry OBJECT-TYPE
+ SYNTAX AcSysIKEPolicyEntry
+ MAX-ACCESS not-accessible
+ STATUS obsolete
+ DESCRIPTION
+ ""
+ INDEX {acSysIKEPolicyIndex}
+ ::= {acSysIKEPolicyTable 1}
+
+
+
+ -- ****************************************
+ -- acSysIKEPolicy TABLE
+ -- ****************************************
+ AcSysIKEPolicyEntry ::= SEQUENCE {
+ acSysIKEPolicyIndex Unsigned32,
+ acSysIKEPolicyRowStatus RowStatus,
+ acSysIKEPolicyAction INTEGER,
+ acSysIKEPolicyActionRes INTEGER,
+ acSysIKEPolicyShardKey SnmpAdminString,
+ acSysIKEPolicyLifeInSeconds Unsigned32,
+ acSysIKEPolicyLifeInKB Unsigned32,
+ acSysIKEPolicyProposal0Encryption INTEGER,
+ acSysIKEPolicyProposal1Encryption INTEGER,
+ acSysIKEPolicyProposal2Encryption INTEGER,
+ acSysIKEPolicyProposal3Encryption INTEGER,
+ acSysIKEPolicyProposal0Authentication INTEGER,
+ acSysIKEPolicyProposal1Authentication INTEGER,
+ acSysIKEPolicyProposal2Authentication INTEGER,
+ acSysIKEPolicyProposal3Authentication INTEGER,
+ acSysIKEPolicyProposal0DHGroup INTEGER,
+ acSysIKEPolicyProposal1DHGroup INTEGER,
+ acSysIKEPolicyProposal2DHGroup INTEGER,
+ acSysIKEPolicyProposal3DHGroup INTEGER,
+ acSysIKEPolicyAuthenticationMethod INTEGER
+ }
+
+
+
+ acSysIKEPolicyIndex OBJECT-TYPE
+ SYNTAX Unsigned32 (0..19)
+ MAX-ACCESS not-accessible
+ STATUS obsolete
+ DESCRIPTION
+ "This parameter is used for the Internet Key Encryption (IKE)
+Index Field for line. Internal parameter.
+AC INI-Param: IKE_DB_INDEX"
+ ::= {acSysIKEPolicyEntry 1}
+
+
+
+ acSysIKEPolicyRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS obsolete
+ DESCRIPTION
+ "This parameter is used for the Internet Key Encryption (IKE)
+ROWSTATUS Field for line. Internal parameter.
+AC INI-Param: IKE_DB_ROWSTATUS"
+ ::= {acSysIKEPolicyEntry 2}
+
+
+
+ acSysIKEPolicyAction OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(0)
+
+ }
+ MAX-ACCESS read-create
+ STATUS obsolete
+ DESCRIPTION
+ "This parameter is used for the Internet Key Encryption (IKE)
+Mangement Field for ACTIONS. Internal parameter.
+AC INI-Param: IKE_DB_ACTION"
+ ::= {acSysIKEPolicyEntry 3}
+
+
+
+ acSysIKEPolicyActionRes OBJECT-TYPE
+ SYNTAX INTEGER {
+ succeeded(0)
+
+ }
+ MAX-ACCESS read-only
+ STATUS obsolete
+ DESCRIPTION
+ "This parameter is used for the Internet Key Encryption (IKE)
+Mangement Field for ACTIONS RESULT. Internal parameter.
+AC INI-Param: IKE_DB_ACTION_RESULT"
+ ::= {acSysIKEPolicyEntry 4}
+
+
+
+ acSysIKEPolicyShardKey OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..80))
+ MAX-ACCESS read-create
+ STATUS obsolete
+ DESCRIPTION
+ "IKE Policy - Shared Key.
+Access: Instant.
+AC INI-Param: IKEPOLICYSHAREDKEY"
+ ::= {acSysIKEPolicyEntry 5}
+
+
+
+ acSysIKEPolicyLifeInSeconds OBJECT-TYPE
+ SYNTAX Unsigned32 (0..2147483647)
+ MAX-ACCESS read-create
+ STATUS obsolete
+ DESCRIPTION
+ "IKE Policy - IKE SA LifeTime in seconds.
+Access: Instant.
+AC INI-Param: IKEPOLICYLIFEINSEC"
+ ::= {acSysIKEPolicyEntry 6}
+
+
+
+ acSysIKEPolicyLifeInKB OBJECT-TYPE
+ SYNTAX Unsigned32 (0..2147483647)
+ MAX-ACCESS read-create
+ STATUS obsolete
+ DESCRIPTION
+ "IKE Policy - IKE SA LifeTime in KB.
+Access: Instant.
+AC INI-Param: IKEPOLICYLIFEINKB"
+ ::= {acSysIKEPolicyEntry 7}
+
+
+
+ acSysIKEPolicyProposal0Encryption OBJECT-TYPE
+ SYNTAX INTEGER {
+ dES-CBC(1)
+,
+ triple-DES-CBC(2)
+,
+ aES(3)
+,
+ not-set(10)
+
+ }
+ MAX-ACCESS read-create
+ STATUS obsolete
+ DESCRIPTION
+ "IKE Policy - Proposal 0 encryption type.
+Access: Instant.
+AC INI-Param: IKEPOLICYPROPOSALENCRYPTION_0"
+ ::= {acSysIKEPolicyEntry 8}
+
+
+
+ acSysIKEPolicyProposal1Encryption OBJECT-TYPE
+ SYNTAX INTEGER {
+ dES-CBC(1)
+,
+ triple-DES-CBC(2)
+,
+ aES(3)
+,
+ not-set(10)
+
+ }
+ MAX-ACCESS read-create
+ STATUS obsolete
+ DESCRIPTION
+ "IKE Policy - Proposal 1 encryption type.
+Access: Instant.
+AC INI-Param: IKEPOLICYPROPOSALENCRYPTION_1"
+ ::= {acSysIKEPolicyEntry 9}
+
+
+
+ acSysIKEPolicyProposal2Encryption OBJECT-TYPE
+ SYNTAX INTEGER {
+ dES-CBC(1)
+,
+ triple-DES-CBC(2)
+,
+ aES(3)
+,
+ not-set(10)
+
+ }
+ MAX-ACCESS read-create
+ STATUS obsolete
+ DESCRIPTION
+ "IKE Policy - Proposal 2 encryption type.
+Access: Instant.
+AC INI-Param: IKEPOLICYPROPOSALENCRYPTION_2"
+ ::= {acSysIKEPolicyEntry 10}
+
+
+
+ acSysIKEPolicyProposal3Encryption OBJECT-TYPE
+ SYNTAX INTEGER {
+ dES-CBC(1)
+,
+ triple-DES-CBC(2)
+,
+ aES(3)
+,
+ not-set(10)
+
+ }
+ MAX-ACCESS read-create
+ STATUS obsolete
+ DESCRIPTION
+ "IKE Policy - Proposal 3 encryption type.
+Access: Instant.
+AC INI-Param: IKEPOLICYPROPOSALENCRYPTION_3"
+ ::= {acSysIKEPolicyEntry 11}
+
+
+
+ acSysIKEPolicyProposal0Authentication OBJECT-TYPE
+ SYNTAX INTEGER {
+ hMAC-SHA-1-96(2)
+,
+ hMAC-MD5-96(4)
+,
+ not-set(10)
+
+ }
+ MAX-ACCESS read-create
+ STATUS obsolete
+ DESCRIPTION
+ "IKE Policy - Proposal 0 authentication type.
+Access: Instant.
+AC INI-Param: IKEPOLICYPROPOSALAUTHENTICATION_0"
+ ::= {acSysIKEPolicyEntry 12}
+
+
+
+ acSysIKEPolicyProposal1Authentication OBJECT-TYPE
+ SYNTAX INTEGER {
+ hMAC-SHA-1-96(2)
+,
+ hMAC-MD5-96(4)
+,
+ not-set(10)
+
+ }
+ MAX-ACCESS read-create
+ STATUS obsolete
+ DESCRIPTION
+ "IKE Policy - Proposal 1 authentication type.
+Access: Instant.
+AC INI-Param: IKEPOLICYPROPOSALAUTHENTICATION_1"
+ ::= {acSysIKEPolicyEntry 13}
+
+
+
+ acSysIKEPolicyProposal2Authentication OBJECT-TYPE
+ SYNTAX INTEGER {
+ hMAC-SHA-1-96(2)
+,
+ hMAC-MD5-96(4)
+,
+ not-set(10)
+
+ }
+ MAX-ACCESS read-create
+ STATUS obsolete
+ DESCRIPTION
+ "IKE Policy - Proposal 2 authentication type.
+Access: Instant.
+AC INI-Param: IKEPOLICYPROPOSALAUTHENTICATION_2"
+ ::= {acSysIKEPolicyEntry 14}
+
+
+
+ acSysIKEPolicyProposal3Authentication OBJECT-TYPE
+ SYNTAX INTEGER {
+ hMAC-SHA-1-96(2)
+,
+ hMAC-MD5-96(4)
+,
+ not-set(10)
+
+ }
+ MAX-ACCESS read-create
+ STATUS obsolete
+ DESCRIPTION
+ "IKE Policy - Proposal 3 authentication type.
+Access: Instant.
+AC INI-Param: IKEPOLICYPROPOSALAUTHENTICATION_3"
+ ::= {acSysIKEPolicyEntry 15}
+
+
+
+ acSysIKEPolicyProposal0DHGroup OBJECT-TYPE
+ SYNTAX INTEGER {
+ dH-786-BIT(0)
+,
+ dH-1024-BIT(1)
+,
+ not-set(10)
+
+ }
+ MAX-ACCESS read-create
+ STATUS obsolete
+ DESCRIPTION
+ "IKE Policy - Proposal 0 Diffie Hellman Group.
+Access: Instant.
+AC INI-Param: IKEPOLICYPROPOSALDHGROUP_0"
+ ::= {acSysIKEPolicyEntry 16}
+
+
+
+ acSysIKEPolicyProposal1DHGroup OBJECT-TYPE
+ SYNTAX INTEGER {
+ dH-786-BIT(0)
+,
+ dH-1024-BIT(1)
+,
+ not-set(10)
+
+ }
+ MAX-ACCESS read-create
+ STATUS obsolete
+ DESCRIPTION
+ "IKE Policy - Proposal 1 Diffie Hellman Group.
+Access: Instant.
+AC INI-Param: IKEPOLICYPROPOSALDHGROUP_1"
+ ::= {acSysIKEPolicyEntry 17}
+
+
+
+ acSysIKEPolicyProposal2DHGroup OBJECT-TYPE
+ SYNTAX INTEGER {
+ dH-786-BIT(0)
+,
+ dH-1024-BIT(1)
+,
+ not-set(10)
+
+ }
+ MAX-ACCESS read-create
+ STATUS obsolete
+ DESCRIPTION
+ "IKE Policy - Proposal 2 Diffie Hellman Group.
+Access: Instant.
+AC INI-Param: IKEPOLICYPROPOSALDHGROUP_2"
+ ::= {acSysIKEPolicyEntry 18}
+
+
+
+ acSysIKEPolicyProposal3DHGroup OBJECT-TYPE
+ SYNTAX INTEGER {
+ dH-786-BIT(0)
+,
+ dH-1024-BIT(1)
+,
+ not-set(10)
+
+ }
+ MAX-ACCESS read-create
+ STATUS obsolete
+ DESCRIPTION
+ "IKE Policy - Proposal 3 Diffie Hellman Group.
+Access: Instant.
+AC INI-Param: IKEPOLICYPROPOSALDHGROUP_3"
+ ::= {acSysIKEPolicyEntry 19}
+
+
+
+ acSysIKEPolicyAuthenticationMethod OBJECT-TYPE
+ SYNTAX INTEGER {
+ presharedKey(0)
+,
+ rsaSignature(1)
+
+ }
+ MAX-ACCESS read-create
+ STATUS obsolete
+ DESCRIPTION
+ "This parameter is used for Internet Key Encryption (IKE) Policy
+- IKE Authentication Method (Preshared key/ RSA).
+Access: Offline.
+AC INI-Param: IKEPOLICYAUTHENTICATIONMETHOD"
+ ::= {acSysIKEPolicyEntry 20}
+
+
+
+ acSysIPSec OBJECT IDENTIFIER ::= {acSysSecurity 22}
+
+
+ acSysIPSecEnable OBJECT-TYPE
+ SYNTAX INTEGER {
+ no(0)
+,
+ yes(1)
+
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "IPsec Enable flag.
+Access: Offline.
+AC INI-Param: ENABLEIPSEC"
+ ::= {acSysIPSec 1}
+
+
+
+ acSysIPSecDpdMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0)
+,
+ periodic(1)
+,
+ ondemand(2)
+
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "IPsec Dead Peer Detection (RFC 3706) - Mode of Operation.
+One of the following values: '0' - Disabled (Default)
+ '1' - Periodic
+ '2' - On demand.
+Access: Instant.
+AC INI-Param: IPSECDPDMODE"
+ ::= {acSysIPSec 2}
+
+
+
+ acSysIPSecIKECertificateExtValidate OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0)
+,
+ enabled(1)
+
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Enables or disables certificate extension checking for IKE.
+Access: Instant.
+AC INI-Param: IKEcertificateExtValidate"
+ ::= {acSysIPSec 3}
+
+
+
+ -- ****************************************
+ -- acSysIPSecSPD table declaration
+ -- ****************************************
+ acSysIPSecSPDTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AcSysIPSecSPDEntry
+ MAX-ACCESS not-accessible
+ STATUS obsolete
+ DESCRIPTION
+ ""
+ ::= {acSysIPSec 21}
+
+
+
+ -- ****************************************
+ -- acSysIPSecSPD table entry
+ -- ****************************************
+ acSysIPSecSPDEntry OBJECT-TYPE
+ SYNTAX AcSysIPSecSPDEntry
+ MAX-ACCESS not-accessible
+ STATUS obsolete
+ DESCRIPTION
+ ""
+ INDEX {acSysIPSecSPDIndex}
+ ::= {acSysIPSecSPDTable 1}
+
+
+
+ -- ****************************************
+ -- acSysIPSecSPD TABLE
+ -- ****************************************
+ AcSysIPSecSPDEntry ::= SEQUENCE {
+ acSysIPSecSPDIndex Unsigned32,
+ acSysIPSecSPDRowStatus RowStatus,
+ acSysIPSecSPDAction INTEGER,
+ acSysIPSecSPDActionRes INTEGER,
+ acSysIPSecSPDPolicyRemoteIPAddr SnmpAdminString,
+ acSysIPSecSPDPolicySrcPort Unsigned32,
+ acSysIPSecSPDPolicyDestPort Unsigned32,
+ acSysIPSecSPDPolicyProtocol Unsigned32,
+ acSysIPSecSPDKeyExchangeMethodIndex Unsigned32,
+ acSysIPSecSPDLifeInSeconds Unsigned32,
+ acSysIPSecSPDLifeInKB Unsigned32,
+ acSysIPSecSPDProposal0Encryption INTEGER,
+ acSysIPSecSPDProposal1Encryption INTEGER,
+ acSysIPSecSPDProposal2Encryption INTEGER,
+ acSysIPSecSPDProposal3Encryption INTEGER,
+ acSysIPSecSPDProposal0Authentication INTEGER,
+ acSysIPSecSPDProposal1Authentication INTEGER,
+ acSysIPSecSPDProposal2Authentication INTEGER,
+ acSysIPSecSPDProposal3Authentication INTEGER,
+ acSysIPSecSPDPolicyLocalIPAddrType INTEGER,
+ acSysIPSecSPDMode INTEGER,
+ acSysIPSecSPDPolicyRemoteTunnelIPAddress IpAddress,
+ acSysIPSecSPDPolicyLocalTunnelIPAddress IpAddress,
+ acSysIPSecSPDPolicyRemoteTunnelSubnetMask IpAddress
+ }
+
+
+
+ acSysIPSecSPDIndex OBJECT-TYPE
+ SYNTAX Unsigned32 (0..19)
+ MAX-ACCESS not-accessible
+ STATUS obsolete
+ DESCRIPTION
+ "Security Policy Database (SPD) Index Field for line. Internal
+parameter.
+AC INI-Param: SPD_INDEX"
+ ::= {acSysIPSecSPDEntry 1}
+
+
+
+ acSysIPSecSPDRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS obsolete
+ DESCRIPTION
+ "Security Policy Database (SPD) ROWSTATUS field for line. Internal
+parameter.
+AC INI-Param: SPD_ROWSTATUS"
+ ::= {acSysIPSecSPDEntry 2}
+
+
+
+ acSysIPSecSPDAction OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(0)
+
+ }
+ MAX-ACCESS read-create
+ STATUS obsolete
+ DESCRIPTION
+ "Security Policy Database (SPD) Mangement Field for ACTIONS.
+Internal parameter.
+AC INI-Param: SPD_ACTION"
+ ::= {acSysIPSecSPDEntry 3}
+
+
+
+ acSysIPSecSPDActionRes OBJECT-TYPE
+ SYNTAX INTEGER {
+ succeeded(0)
+
+ }
+ MAX-ACCESS read-only
+ STATUS obsolete
+ DESCRIPTION
+ "Security Policy Database (SPD) Mangement Field for ACTIONS RESULT.
+Internal parameter.
+AC INI-Param: SPD_ACTION_RESULT"
+ ::= {acSysIPSecSPDEntry 4}
+
+
+
+ acSysIPSecSPDPolicyRemoteIPAddr OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..99))
+ MAX-ACCESS read-create
+ STATUS obsolete
+ DESCRIPTION
+ "This parameter is used for Secure Internet Protocol (IPsec)
+Policy Policy - Remote IP address as IP or Host Name.
+Access: Instant.
+AC INI-Param: IPSECPOLICYREMOTEIPADDRESS"
+ ::= {acSysIPSecSPDEntry 5}
+
+
+
+ acSysIPSecSPDPolicySrcPort OBJECT-TYPE
+ SYNTAX Unsigned32 (0..65536)
+ MAX-ACCESS read-create
+ STATUS obsolete
+ DESCRIPTION
+ "This parameter is used for Secure Internet Protocol (IPsec)
+Policy Policy - Source Port.
+Access: Instant.
+AC INI-Param: IPSECPOLICYSRCPORT"
+ ::= {acSysIPSecSPDEntry 6}
+
+
+
+ acSysIPSecSPDPolicyDestPort OBJECT-TYPE
+ SYNTAX Unsigned32 (0..65536)
+ MAX-ACCESS read-create
+ STATUS obsolete
+ DESCRIPTION
+ "This parameter is used for Secure Internet Protocol (IPsec)
+Policy Policy - Destination Port.
+Access: Instant.
+AC INI-Param: IPSECPOLICYDSTPORT"
+ ::= {acSysIPSecSPDEntry 7}
+
+
+
+ acSysIPSecSPDPolicyProtocol OBJECT-TYPE
+ SYNTAX Unsigned32 (0..255)
+ MAX-ACCESS read-create
+ STATUS obsolete
+ DESCRIPTION
+ "This parameter is used for Secure Internet Protocol (IPsec)
+Policy Policy - Protocol.
+Access: Instant.
+AC INI-Param: IPSECPOLICYPROTOCOL"
+ ::= {acSysIPSecSPDEntry 8}
+
+
+
+ acSysIPSecSPDKeyExchangeMethodIndex OBJECT-TYPE
+ SYNTAX Unsigned32 (0..2147483647)
+ MAX-ACCESS read-create
+ STATUS obsolete
+ DESCRIPTION
+ "This parameter is used for the Secure Internet Protocol (IPsec)
+Policy - Index into the Key Exchange Method Table (IKE Table).
+Access: Offline.
+AC INI-Param: IPSECPOLICYKEYEXCHANGEMETHODINDEX"
+ ::= {acSysIPSecSPDEntry 9}
+
+
+
+ acSysIPSecSPDLifeInSeconds OBJECT-TYPE
+ SYNTAX Unsigned32 (0..2147483647)
+ MAX-ACCESS read-create
+ STATUS obsolete
+ DESCRIPTION
+ "IPsec Policy - IPSec SA LifeTime in seconds.
+Access: Instant.
+AC INI-Param: IPSECPOLICYLIFEINSEC"
+ ::= {acSysIPSecSPDEntry 10}
+
+
+
+ acSysIPSecSPDLifeInKB OBJECT-TYPE
+ SYNTAX Unsigned32 (0..2147483647)
+ MAX-ACCESS read-create
+ STATUS obsolete
+ DESCRIPTION
+ "IPsec Policy - IPSec SA LifeTime in KB.
+Access: Instant.
+AC INI-Param: IPSECPOLICYLIFEINKB"
+ ::= {acSysIPSecSPDEntry 11}
+
+
+
+ acSysIPSecSPDProposal0Encryption OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(0)
+,
+ dES-CBC(1)
+,
+ triple-DES-CBC(2)
+,
+ aES(3)
+,
+ not-set(10)
+
+ }
+ MAX-ACCESS read-create
+ STATUS obsolete
+ DESCRIPTION
+ "IPsec Policy - Proposal 0 encryption type.
+Access: Instant.
+AC INI-Param: IPSECPOLICYPROPOSALENCRYPTION_0"
+ ::= {acSysIPSecSPDEntry 12}
+
+
+
+ acSysIPSecSPDProposal1Encryption OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(0)
+,
+ dES-CBC(1)
+,
+ triple-DES-CBC(2)
+,
+ aES(3)
+,
+ not-set(10)
+
+ }
+ MAX-ACCESS read-create
+ STATUS obsolete
+ DESCRIPTION
+ "IPsec Policy - Proposal 1 encryption type.
+Access: Instant.
+AC INI-Param: IPSECPOLICYPROPOSALENCRYPTION_1"
+ ::= {acSysIPSecSPDEntry 13}
+
+
+
+ acSysIPSecSPDProposal2Encryption OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(0)
+,
+ dES-CBC(1)
+,
+ triple-DES-CBC(2)
+,
+ aES(3)
+,
+ not-set(10)
+
+ }
+ MAX-ACCESS read-create
+ STATUS obsolete
+ DESCRIPTION
+ "IPsec Policy - Proposal 2 encryption type.
+Access: Instant.
+AC INI-Param: IPSECPOLICYPROPOSALENCRYPTION_2"
+ ::= {acSysIPSecSPDEntry 14}
+
+
+
+ acSysIPSecSPDProposal3Encryption OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(0)
+,
+ dES-CBC(1)
+,
+ triple-DES-CBC(2)
+,
+ aES(3)
+,
+ not-set(10)
+
+ }
+ MAX-ACCESS read-create
+ STATUS obsolete
+ DESCRIPTION
+ "IPsec Policy - Proposal 3 encryption type.
+Access: Instant.
+AC INI-Param: IPSECPOLICYPROPOSALENCRYPTION_3"
+ ::= {acSysIPSecSPDEntry 15}
+
+
+
+ acSysIPSecSPDProposal0Authentication OBJECT-TYPE
+ SYNTAX INTEGER {
+ hMAC-SHA-1-96(2)
+,
+ hMAC-MD5-96(4)
+,
+ not-set(10)
+
+ }
+ MAX-ACCESS read-create
+ STATUS obsolete
+ DESCRIPTION
+ "IPsec Policy - Proposal 0 authentication type.
+Access: Instant.
+AC INI-Param: IPSECPOLICYPROPOSALAUTHENTICATION_0"
+ ::= {acSysIPSecSPDEntry 16}
+
+
+
+ acSysIPSecSPDProposal1Authentication OBJECT-TYPE
+ SYNTAX INTEGER {
+ hMAC-SHA-1-96(2)
+,
+ hMAC-MD5-96(4)
+,
+ not-set(10)
+
+ }
+ MAX-ACCESS read-create
+ STATUS obsolete
+ DESCRIPTION
+ "IPsec Policy - Proposal 0 authentication type.
+Access: Instant.
+AC INI-Param: IPSECPOLICYPROPOSALAUTHENTICATION_1"
+ ::= {acSysIPSecSPDEntry 17}
+
+
+
+ acSysIPSecSPDProposal2Authentication OBJECT-TYPE
+ SYNTAX INTEGER {
+ hMAC-SHA-1-96(2)
+,
+ hMAC-MD5-96(4)
+,
+ not-set(10)
+
+ }
+ MAX-ACCESS read-create
+ STATUS obsolete
+ DESCRIPTION
+ "IPsec Policy - Proposal 0 authentication type.
+Access: Instant.
+AC INI-Param: IPSECPOLICYPROPOSALAUTHENTICATION_2"
+ ::= {acSysIPSecSPDEntry 18}
+
+
+
+ acSysIPSecSPDProposal3Authentication OBJECT-TYPE
+ SYNTAX INTEGER {
+ hMAC-SHA-1-96(2)
+,
+ hMAC-MD5-96(4)
+,
+ not-set(10)
+
+ }
+ MAX-ACCESS read-create
+ STATUS obsolete
+ DESCRIPTION
+ "IPsec Policy - Proposal 0 authentication type.
+Access: Instant.
+AC INI-Param: IPSECPOLICYPROPOSALAUTHENTICATION_3"
+ ::= {acSysIPSecSPDEntry 19}
+
+
+
+ acSysIPSecSPDPolicyLocalIPAddrType OBJECT-TYPE
+ SYNTAX INTEGER {
+ oam(0)
+,
+ control(2)
+
+ }
+ MAX-ACCESS read-create
+ STATUS obsolete
+ DESCRIPTION
+ "This parameter is used for Secure Internet Protocol (IPsec)
+Policy - Local IP address type (OAM/Control).
+Access: Offline.
+AC INI-Param: IPSECPOLICYLOCALIPADDRESSTYPE"
+ ::= {acSysIPSecSPDEntry 20}
+
+
+
+ acSysIPSecSPDMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ transport(0)
+,
+ tunneling(1)
+
+ }
+ MAX-ACCESS read-create
+ STATUS obsolete
+ DESCRIPTION
+ "This parameter is used for Secure Internet Protocol (IPsec)
+Policy - Mode of Operation (Transport/Tunneling). '0' - Transport
+ '1' - Tunneling.
+Access: Instant.
+AC INI-Param: IPSECMODE"
+ ::= {acSysIPSecSPDEntry 21}
+
+
+
+ acSysIPSecSPDPolicyRemoteTunnelIPAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-create
+ STATUS obsolete
+ DESCRIPTION
+ "This parameter is used for Secure Internet Protocol (IPsec)
+Policy - IP Address of the Remote IPSec Tunnel Endpoint.
+Access: Instant.
+AC INI-Param: IPSECPOLICYREMOTETUNNELIPADDRESS"
+ ::= {acSysIPSecSPDEntry 22}
+
+
+
+ acSysIPSecSPDPolicyLocalTunnelIPAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-create
+ STATUS obsolete
+ DESCRIPTION
+ "This parameter is used for Secure Internet Protocol (IPsec)
+Policy - IP Address of the Remote IPSec Tunnel Endpoint.
+Access: Instant.
+AC INI-Param: IPSECPOLICYLOCALTUNNELIPADDRESS"
+ ::= {acSysIPSecSPDEntry 23}
+
+
+
+ acSysIPSecSPDPolicyRemoteTunnelSubnetMask OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-create
+ STATUS obsolete
+ DESCRIPTION
+ "This parameter is used for Secure Internet Protocol (IPsec)
+Policy - Subnet Mask of the Remote IPSec Address.
+Access: Instant.
+AC INI-Param: IPSECPOLICYREMOTESUBNETMASK"
+ ::= {acSysIPSecSPDEntry 24}
+
+
+
+ -- ****************************************
+ -- acSysIPsecProposal table declaration
+ -- ****************************************
+ acSysIPsecProposalTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AcSysIPsecProposalEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "IPsec Proposal table"
+ ::= {acSysIPSec 22}
+
+
+
+ -- ****************************************
+ -- acSysIPsecProposal table entry
+ -- ****************************************
+ acSysIPsecProposalEntry OBJECT-TYPE
+ SYNTAX AcSysIPsecProposalEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ ""
+ INDEX {acSysIPsecProposalIndex}
+ ::= {acSysIPsecProposalTable 1}
+
+
+
+ -- ****************************************
+ -- acSysIPsecProposal TABLE
+ -- ****************************************
+ AcSysIPsecProposalEntry ::= SEQUENCE {
+ acSysIPsecProposalIndex Unsigned32,
+ acSysIPsecProposalRowStatus RowStatus,
+ acSysIPsecProposalAction INTEGER,
+ acSysIPsecProposalActionRes INTEGER,
+ acSysIPsecProposalEncryptionAlgorithm INTEGER,
+ acSysIPsecProposalAuthenticationAlgorithm INTEGER,
+ acSysIPsecProposalDiffieHellmanGroup INTEGER
+ }
+
+
+
+ acSysIPsecProposalIndex OBJECT-TYPE
+ SYNTAX Unsigned32 (0..4)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Index Field for line.
+AC INI-Param: IPsecProposalTable_Index"
+ ::= {acSysIPsecProposalEntry 1}
+
+
+
+ acSysIPsecProposalRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "ROWSTATUS Field for line.
+AC INI-Param: IPsecProposalTable_RowStatus"
+ ::= {acSysIPsecProposalEntry 2}
+
+
+
+ acSysIPsecProposalAction OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(0)
+
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Mangement Field for ACTIONS.
+AC INI-Param: IPsecProposalTable_Action"
+ ::= {acSysIPsecProposalEntry 3}
+
+
+
+ acSysIPsecProposalActionRes OBJECT-TYPE
+ SYNTAX INTEGER {
+ succeeded(0)
+
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Mangement Field for ACTIONS RESULT.
+AC INI-Param: IPsecProposalTable_ActionRes"
+ ::= {acSysIPsecProposalEntry 4}
+
+
+
+ acSysIPsecProposalEncryptionAlgorithm OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(0)
+,
+ desCbc(1)
+,
+ tripleDesCbc(2)
+,
+ aes(3)
+
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Selects the encryption (privacy) algorithm to use.
+Access: Online.
+AC INI-Param: IPsecProposalTable_EncryptionAlgorithm"
+ ::= {acSysIPsecProposalEntry 5}
+
+
+
+ acSysIPsecProposalAuthenticationAlgorithm OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(0)
+,
+ hmacSha1-96(2)
+,
+ hmacMd5-96(4)
+
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Selects the message authentication (integrity) algorithm to
+use.
+Access: Online.
+AC INI-Param: IPsecProposalTable_AuthenticationAlgorithm"
+ ::= {acSysIPsecProposalEntry 6}
+
+
+
+ acSysIPsecProposalDiffieHellmanGroup OBJECT-TYPE
+ SYNTAX INTEGER {
+ group1-768Bits(0)
+,
+ group2-1024Bits(1)
+
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Selects the Diffie-Hellman group to use.
+Access: Online.
+AC INI-Param: IPsecProposalTable_DHGroup"
+ ::= {acSysIPsecProposalEntry 7}
+
+
+
+ -- ****************************************
+ -- acSysIPsecSA table declaration
+ -- ****************************************
+ acSysIPsecSATable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AcSysIPsecSAEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "IPsec SA table"
+ ::= {acSysIPSec 23}
+
+
+
+ -- ****************************************
+ -- acSysIPsecSA table entry
+ -- ****************************************
+ acSysIPsecSAEntry OBJECT-TYPE
+ SYNTAX AcSysIPsecSAEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ ""
+ INDEX {acSysIPsecSAIndex}
+ ::= {acSysIPsecSATable 1}
+
+
+
+ -- ****************************************
+ -- acSysIPsecSA TABLE
+ -- ****************************************
+ AcSysIPsecSAEntry ::= SEQUENCE {
+ acSysIPsecSAIndex Unsigned32,
+ acSysIPsecSARowStatus RowStatus,
+ acSysIPsecSAAction Unsigned32,
+ acSysIPsecSAActionRes Unsigned32,
+ acSysIPsecSARemoteEndpointAddress SnmpAdminString,
+ acSysIPsecSAAuthenticationMethod INTEGER,
+ acSysIPsecSASharedKey SnmpAdminString,
+ acSysIPsecSASourcePort Unsigned32,
+ acSysIPsecSADestPort Unsigned32,
+ acSysIPsecSAProtocol Unsigned32,
+ acSysIPsecSAPhase1SaLifetimeInSec Unsigned32,
+ acSysIPsecSAPhase2SaLifetimeInSec Unsigned32,
+ acSysIPsecSAPhase2SaLifetimeInKB Unsigned32,
+ acSysIPsecSADPDmode INTEGER,
+ acSysIPsecSAIPsecMode INTEGER,
+ acSysIPsecSARemoteTunnelAddress SnmpAdminString,
+ acSysIPsecSARemoteSubnetIPAddress SnmpAdminString,
+ acSysIPsecSARemoteSubnetPrefixLength Unsigned32,
+ acSysIPsecSAInterfaceName RowPointer
+ }
+
+
+
+ acSysIPsecSAIndex OBJECT-TYPE
+ SYNTAX Unsigned32 (0..20)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Index Field for line.
+AC INI-Param: IPsecSATable_Index"
+ ::= {acSysIPsecSAEntry 1}
+
+
+
+ acSysIPsecSARowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "ROWSTATUS Field for line.
+AC INI-Param: IPsecSATable_RowStatus"
+ ::= {acSysIPsecSAEntry 2}
+
+
+
+ acSysIPsecSAAction OBJECT-TYPE
+ SYNTAX Unsigned32 (0..0)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Mangement Field for ACTIONS.
+AC INI-Param: IPsecSATable_Action"
+ ::= {acSysIPsecSAEntry 3}
+
+
+
+ acSysIPsecSAActionRes OBJECT-TYPE
+ SYNTAX Unsigned32 (0..0)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Mangement Field for ACTIONS RESULT.
+AC INI-Param: IPsecSATable_ActionRes"
+ ::= {acSysIPsecSAEntry 4}
+
+
+
+ acSysIPsecSARemoteEndpointAddress OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..98))
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "IP address or DNS host name of the peer.
+Access: Online.
+AC INI-Param: IPsecSATable_RemoteEndpointAddressOrName"
+ ::= {acSysIPsecSAEntry 5}
+
+
+
+ acSysIPsecSAAuthenticationMethod OBJECT-TYPE
+ SYNTAX INTEGER {
+ presharedKey(0)
+,
+ rSASignature(1)
+
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Selects the method used for peer authentication during IKE main
+mode.
+Access: Online.
+AC INI-Param: IPsecSATable_AuthenticationMethod"
+ ::= {acSysIPsecSAEntry 6}
+
+
+
+ acSysIPsecSASharedKey OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..79))
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Defines the pre-shared key (in textual format).
+Access: Online.
+AC INI-Param: IPsecSATable_SharedKey"
+ ::= {acSysIPsecSAEntry 7}
+
+
+
+ acSysIPsecSASourcePort OBJECT-TYPE
+ SYNTAX Unsigned32 (0..65535)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Defines the source port to which this configuration applies.
+Access: Online.
+AC INI-Param: IPsecSATable_SourcePort"
+ ::= {acSysIPsecSAEntry 8}
+
+
+
+ acSysIPsecSADestPort OBJECT-TYPE
+ SYNTAX Unsigned32 (0..65535)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Defines the destination port to which this configuration applies.
+Access: Online.
+AC INI-Param: IPsecSATable_DestPort"
+ ::= {acSysIPsecSAEntry 9}
+
+
+
+ acSysIPsecSAProtocol OBJECT-TYPE
+ SYNTAX Unsigned32 (0..255)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Defines the protocol type to which this configuration applies.
+Standard IP protocol numbers should be used, e.g.:
+0 = Any protocol (default)
+17 = UDP
+6 = TCP
+.
+Access: Online.
+AC INI-Param: IPsecSATable_Protocol"
+ ::= {acSysIPsecSAEntry 10}
+
+
+
+ acSysIPsecSAPhase1SaLifetimeInSec OBJECT-TYPE
+ SYNTAX Unsigned32 (0..2147483647)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Determines the duration (in seconds) for which the negotiated
+IKE SA (main mode) is valid. After the time expires, the SA
+is re-negotiated.
+Access: Online.
+AC INI-Param: IPsecSATable_Phase1SaLifetimeInSec"
+ ::= {acSysIPsecSAEntry 11}
+
+
+
+ acSysIPsecSAPhase2SaLifetimeInSec OBJECT-TYPE
+ SYNTAX Unsigned32 (0..2147483647)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Determines the duration (in seconds) for which the negotiated
+IPSec SA (quick mode) is valid. After the time expires, the
+SA is re-negotiated.
+Access: Online.
+AC INI-Param: IPsecSATable_Phase2SaLifetimeInSec"
+ ::= {acSysIPsecSAEntry 12}
+
+
+
+ acSysIPsecSAPhase2SaLifetimeInKB OBJECT-TYPE
+ SYNTAX Unsigned32 (0..2147483647)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Determines the maximum volume of traffic (in kilobytes) for
+which the negotiated IPSec SA (quick mode) is valid.
+Access: Online.
+AC INI-Param: IPsecSATable_Phase2SaLifetimeInKB"
+ ::= {acSysIPsecSAEntry 13}
+
+
+
+ acSysIPsecSADPDmode OBJECT-TYPE
+ SYNTAX INTEGER {
+ dPDDisabled(0)
+,
+ dPDPeriodic(1)
+,
+ dPDOnDemand(2)
+
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Controls dead peer detection (DPD) as per RFC 3706.
+Access: Online.
+AC INI-Param: IPsecSATable_DPDmode"
+ ::= {acSysIPsecSAEntry 14}
+
+
+
+ acSysIPsecSAIPsecMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ transport(0)
+,
+ tunnel(1)
+
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Selects the IPSec mode of operation.
+0 = Transport mode (default)
+1 = Tunnel mode
+.
+Access: Online.
+AC INI-Param: IPsecSATable_IPsecMode"
+ ::= {acSysIPsecSAEntry 15}
+
+
+
+ acSysIPsecSARemoteTunnelAddress OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..45))
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "IP address of the peer router.
+Access: Online.
+AC INI-Param: IPsecSATable_RemoteTunnelAddress"
+ ::= {acSysIPsecSAEntry 16}
+
+
+
+ acSysIPsecSARemoteSubnetIPAddress OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..45))
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "IP address of the remote subnetwork.
+Access: Online.
+AC INI-Param: IPsecSATable_RemoteSubnetIPAddress"
+ ::= {acSysIPsecSAEntry 17}
+
+
+
+ acSysIPsecSARemoteSubnetPrefixLength OBJECT-TYPE
+ SYNTAX Unsigned32 (0..128)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Prefix length of the Remote Subnet IP Address parameter (in
+bits).
+Access: Online.
+AC INI-Param: IPsecSATable_RemoteSubnetPrefixLength"
+ ::= {acSysIPsecSAEntry 18}
+
+
+
+ acSysIPsecSAInterfaceName OBJECT-TYPE
+ SYNTAX RowPointer
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Select the OID of the interface name corresponding to the one
+appearing in the interface table.
+The OID should be 1.3.6.1.4.1.5003.9.10.10.1.3.1.30.22.1.11.
+acSysInterfaceIndex
+Note: when ignore a default value will be SET: 0.0.
+Access: Online.
+AC INI-Param: IPsecSATable_InterfaceName"
+ ::= {acSysIPsecSAEntry 19}
+
+
+
+ acFirewall OBJECT IDENTIFIER ::= {acSysSecurity 23}
+
+
+ -- ****************************************
+ -- acSysAccessList table declaration
+ -- ****************************************
+ acSysAccessListTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AcSysAccessListEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ ""
+ ::= {acFirewall 1}
+
+
+
+ -- ****************************************
+ -- acSysAccessList table entry
+ -- ****************************************
+ acSysAccessListEntry OBJECT-TYPE
+ SYNTAX AcSysAccessListEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ ""
+ INDEX {acSysAccessListIndex}
+ ::= {acSysAccessListTable 1}
+
+
+
+ -- ****************************************
+ -- acSysAccessList TABLE
+ -- ****************************************
+ AcSysAccessListEntry ::= SEQUENCE {
+ acSysAccessListIndex Unsigned32,
+ acSysAccessListRowStatus RowStatus,
+ acSysAccessListAction INTEGER,
+ acSysAccessListActionRes INTEGER,
+ acSysAccessListSourceIP SnmpAdminString,
+ acSysAccessListNetMask IpAddress,
+ acSysAccessListStartPort Unsigned32,
+ acSysAccessListEndPort Unsigned32,
+ acSysAccessListProtocol SnmpAdminString,
+ acSysAccessListPacketSize Unsigned32,
+ acSysAccessListByteRate Unsigned32,
+ acSysAccessListByteBurst Unsigned32,
+ acSysAccessListAllowType INTEGER,
+ acSysAccessListMatchCount Unsigned32,
+ acSysAccessListInterfaceName SnmpAdminString,
+ acSysAccessListUseSpecificInterface INTEGER,
+ acSysAccessListSourcePort Unsigned32,
+ acSysAccessListPrefixLength Unsigned32
+ }
+
+
+
+ acSysAccessListIndex OBJECT-TYPE
+ SYNTAX Unsigned32 (0..49)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Index Field for line. Internal parameter.
+AC INI-Param: ACCESSLIST_Index"
+ ::= {acSysAccessListEntry 1}
+
+
+
+ acSysAccessListRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "ROWSTATUS field for line. Internal parameter.
+AC INI-Param: N/A"
+ ::= {acSysAccessListEntry 2}
+
+
+
+ acSysAccessListAction OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(0)
+
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Mangement Field for ACTIONS. Internal parameter.
+AC INI-Param: N/A"
+ ::= {acSysAccessListEntry 3}
+
+
+
+ acSysAccessListActionRes OBJECT-TYPE
+ SYNTAX INTEGER {
+ succeeded(0)
+
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Mangement Field for ACTIONS RESULT. Internal parameter.
+AC INI-Param: N/A"
+ ::= {acSysAccessListEntry 4}
+
+
+
+ acSysAccessListSourceIP OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..60))
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Source IP for access rule.
+Access: Online.
+AC INI-Param: ACCESSLIST_Source_IP"
+ ::= {acSysAccessListEntry 5}
+
+
+
+ acSysAccessListNetMask OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-create
+ STATUS deprecated
+ DESCRIPTION
+ "Mask for this access rule (bitwise ANDed with the source IP
+of the packet).
+Access: Online.
+AC INI-Param: ACCESSLIST_Net_Mask"
+ ::= {acSysAccessListEntry 6}
+
+
+
+ acSysAccessListStartPort OBJECT-TYPE
+ SYNTAX Unsigned32 (0..65535)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Port range - start.
+Access: Online.
+AC INI-Param: ACCESSLIST_Start_Port"
+ ::= {acSysAccessListEntry 7}
+
+
+
+ acSysAccessListEndPort OBJECT-TYPE
+ SYNTAX Unsigned32 (0..65535)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Port range - end.
+Access: Online.
+AC INI-Param: ACCESSLIST_End_Port"
+ ::= {acSysAccessListEntry 8}
+
+
+
+ acSysAccessListProtocol OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..10))
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "IP user-level protocol (TCP, UDP, ICMP, ESP, SIP, MGCP, TPNCP,
+ANY or numeric value).
+Access: Online.
+AC INI-Param: ACCESSLIST_Protocol"
+ ::= {acSysAccessListEntry 9}
+
+
+
+ acSysAccessListPacketSize OBJECT-TYPE
+ SYNTAX Unsigned32 (0..65535)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Maximum packet size (0 = unused).
+Access: Online.
+AC INI-Param: ACCESSLIST_Packet_Size"
+ ::= {acSysAccessListEntry 10}
+
+
+
+ acSysAccessListByteRate OBJECT-TYPE
+ SYNTAX Unsigned32 (0..2147483647)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Allowed traffic in bytes per second (0 = unused).
+Access: Online.
+AC INI-Param: ACCESSLIST_Byte_Rate"
+ ::= {acSysAccessListEntry 11}
+
+
+
+ acSysAccessListByteBurst OBJECT-TYPE
+ SYNTAX Unsigned32 (0..2147483647)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Allowed traffic burst in bytes (0 = unused).
+Access: Online.
+AC INI-Param: ACCESSLIST_Byte_Burst"
+ ::= {acSysAccessListEntry 12}
+
+
+
+ acSysAccessListAllowType OBJECT-TYPE
+ SYNTAX INTEGER {
+ notSet(0)
+,
+ allow(1)
+,
+ block(2)
+
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Allow or block traffic matching this rule.
+Access: Online.
+AC INI-Param: ACCESSLIST_Allow_Type"
+ ::= {acSysAccessListEntry 13}
+
+
+
+ acSysAccessListMatchCount OBJECT-TYPE
+ SYNTAX Unsigned32 (0..65535)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Statistics: number of matched packets.
+AC INI-Param: ACCESSLIST_MatchCount"
+ ::= {acSysAccessListEntry 14}
+
+
+
+ acSysAccessListInterfaceName OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..15))
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Name of the specific interface the rule applies to. None - default
+value when no interface was chosen.
+Access: Online.
+AC INI-Param: ACCESSLIST_Interface_ID"
+ ::= {acSysAccessListEntry 15}
+
+
+
+ acSysAccessListUseSpecificInterface OBJECT-TYPE
+ SYNTAX INTEGER {
+ disable(0)
+,
+ enable(1)
+
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Rule for specific interface or for the entire interfaces.
+Access: Online.
+AC INI-Param: ACCESSLIST_Use_Specific_Interface"
+ ::= {acSysAccessListEntry 16}
+
+
+
+ acSysAccessListSourcePort OBJECT-TYPE
+ SYNTAX Unsigned32 (0..65535)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Source Port.
+Access: Online.
+AC INI-Param: ACCESSLIST_Source_Port"
+ ::= {acSysAccessListEntry 17}
+
+
+
+ acSysAccessListPrefixLength OBJECT-TYPE
+ SYNTAX Unsigned32 (0..128)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Prefix length of source IP address (defining a subnet).
+Access: Online.
+AC INI-Param: ACCESSLIST_PrefixLen"
+ ::= {acSysAccessListEntry 18}
+
+
+
+ acSysMediaEncription OBJECT IDENTIFIER ::= {acSysSecurity 24}
+
+
+ acSysMediaEncriptionRTPAuthenticationDisableTx OBJECT-TYPE
+ SYNTAX INTEGER {
+ inactive(0)
+,
+ active(1)
+
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "On a secured RTP session, determines whether to enable Authentication
+on transmitted RTP packets.
+
+One of the following values:
+
+0 = Enable
+1 = Disable.
+Access: Online.
+AC INI-Param: RTPAuthenticationDisableTx"
+ ::= {acSysMediaEncription 1}
+
+
+
+ acSysMediaEncriptionRTPAuthenticationDisableRx OBJECT-TYPE
+ SYNTAX INTEGER {
+ inactive(0)
+,
+ active(1)
+
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "On a secured RTP session, determines whether to enable Authentication
+on received RTP packets
+0 = Enable
+1 = Disable.
+Access: Online.
+AC INI-Param: RTPAuthenticationDisableRx"
+ ::= {acSysMediaEncription 2}
+
+
+
+ acSysMediaEncriptionRTPEncryptionDisableTx OBJECT-TYPE
+ SYNTAX INTEGER {
+ inactive(0)
+,
+ active(1)
+
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "On a secured RTP session, determines whether to enable Encryption
+on transmitted RTP packets. One of the following values:
+
+0 = Enable
+1 = Disable.
+Access: Online.
+AC INI-Param: RTPEncryptionDisableTx"
+ ::= {acSysMediaEncription 3}
+
+
+
+ acSysMediaEncriptionRTPEncryptionDisableRx OBJECT-TYPE
+ SYNTAX INTEGER {
+ inactive(0)
+,
+ active(1)
+
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "On a secured RTP session, determines whether to enable Encryption
+on transmitted RTP packets. One of the following values:
+
+0 = Enable
+1 = Disable.
+Access: Online.
+AC INI-Param: RTPEncryptionDisableRx"
+ ::= {acSysMediaEncription 4}
+
+
+
+ acSysMediaEncriptionRTCPEncryptionDisableTx OBJECT-TYPE
+ SYNTAX INTEGER {
+ inactive(0)
+,
+ active(1)
+
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "On a secured RTP session, determines whether to enable Encryption
+on transmitted RTCP packets. One of the following values:
+
+0 = Enable
+1 = Disable.
+Access: Online.
+AC INI-Param: RTCPEncryptionDisableTx"
+ ::= {acSysMediaEncription 5}
+
+
+
+ acSysMediaEncriptionRTCPEncryptionDisableRx OBJECT-TYPE
+ SYNTAX INTEGER {
+ inactive(0)
+,
+ active(1)
+
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "On a secured RTP session, determines whether to enable Encryption
+on received RTCP packets.
+
+One of the following values:
+
+0 = Enable
+1 = Disable.
+Access: Online.
+AC INI-Param: RTCPEncryptionDisableRx"
+ ::= {acSysMediaEncription 6}
+
+
+
+ acSys802dot1x OBJECT IDENTIFIER ::= {acSysSecurity 25}
+
+
+ acSys802dot1xMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0)
+,
+ eapMd5(1)
+,
+ protectedEap(2)
+,
+ eapTls(3)
+
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Enables support for IEEE 802.1x physical port security.
+0 = Disabled
+1 = EAP-MD5
+2 = Protected EAP (PEAP)
+3 = EAP-TLS
+.
+Access: Instant.
+AC INI-Param: 802.1xMode"
+ ::= {acSys802dot1x 1}
+
+
+
+ acSys802dot1xUsername OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..31))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Username for IEEE 802.1x support.
+Access: Instant.
+AC INI-Param: 802.1xUsername"
+ ::= {acSys802dot1x 2}
+
+
+
+ acSys802dot1xPassword OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..31))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Password for IEEE 802.1x support.
+Access: Instant.
+AC INI-Param: 802.1xPassword"
+ ::= {acSys802dot1x 3}
+
+
+
+ acSys802dot1xVerifyPeerCertificate OBJECT-TYPE
+ SYNTAX INTEGER {
+ disable(0)
+,
+ enable(1)
+
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Verify Peer Certificate for IEEE 802.1x support.
+Access: Instant.
+AC INI-Param: 802.1xVerifyPeerCertificate"
+ ::= {acSys802dot1x 4}
+
+
+
+ acSysSRTP OBJECT IDENTIFIER ::= {acSysMediaEncription 21}
+
+
+ acSysSRTPPacketMKISize OBJECT-TYPE
+ SYNTAX Unsigned32 (0..4)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Determines the size of the parameter Master Key Identifier (MKI)
+in SRTP Tx packets.
+
+One of the following values:
+
+0 = MKI Disabled
+1 - 4 = size (bytes of MKI).
+Access: Online.
+AC INI-Param: SRTPTxPacketMKISize"
+ ::= {acSysSRTP 1}
+
+
+
+ acSysSerialIF OBJECT IDENTIFIER ::= {acSystemConfiguration 8}
+
+
+ acSysSerialIFBaudRate OBJECT-TYPE
+ SYNTAX INTEGER {
+ r1200(1200)
+,
+ r2400(2400)
+,
+ r4800(4800)
+,
+ r9600(9600)
+,
+ r14400(14400)
+,
+ r19200(19200)
+,
+ r38400(38400)
+,
+ r57600(57600)
+,
+ r115200(115200)
+
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Enables changes to the Serial Baud Rate for Simplified Message
+Desk Interface (SMDI).
+
+Standard values: 1200, 2400, 9600, 14400, 19200, 38400, 57600,
+115200.
+Access: Offline.
+AC INI-Param: SerialBaudRate"
+ ::= {acSysSerialIF 1}
+
+
+
+ acSysSerialIFData OBJECT-TYPE
+ SYNTAX Unsigned32 (7..8)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Changes the serial data bit for the Simplified Message Desk
+Interface (SMDI).
+
+7 = 7 Bit
+8 = 8 Bit.
+Access: Offline.
+AC INI-Param: SerialData"
+ ::= {acSysSerialIF 2}
+
+
+
+ acSysSerialIFParity OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(0)
+,
+ odd(1)
+,
+ even(2)
+
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Changes the serial parity for the Simplified Message Desk Interface
+(SMDI).
+
+0 = None
+1 = Odd
+2 = Even.
+Access: Offline.
+AC INI-Param: SerialParity"
+ ::= {acSysSerialIF 3}
+
+
+
+ acSysSerialIFStop OBJECT-TYPE
+ SYNTAX Unsigned32 (1..2)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Changes the serial stop for the Simplified Message Desk Interface
+(SMDI).
+
+1 = 1 Bit
+2 = 2 Bit.
+Access: Offline.
+AC INI-Param: SerialStop"
+ ::= {acSysSerialIF 4}
+
+
+
+ acSysSerialIFFlowControl OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(0)
+,
+ hardware(1)
+
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Changes the serial flow control for the Simplified Message Desk
+Interface (SMDI).
+
+0 = None
+1 = Hardware.
+Access: Offline.
+AC INI-Param: SerialFlowControl"
+ ::= {acSysSerialIF 5}
+
+
+
+ acVoiceStream OBJECT IDENTIFIER ::= {acSystemConfiguration 9}
+
+
+ acVoiceStreamStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0)
+,
+ enabled(1)
+
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Enables/disables the voice streaming for all voice source types
+(HTTP, NFS, Local Storage). When enabled, the module requires
+some system resources, such as tasks and memory allocation.
+
+0 = Disable
+1 = Enable.
+Access: Offline.
+AC INI-Param: N/A"
+ ::= {acVoiceStream 1}
+
+
+
+ acVoiceStreamUploadMethod OBJECT-TYPE
+ SYNTAX INTEGER {
+ httpPostMethod(0)
+,
+ httpPutMethod(1)
+
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Defines the HTTP request type for uploading the voice stream
+to the file server.
+
+0 = POST
+1 = PUT.
+Access: Offline.
+AC INI-Param: N/A"
+ ::= {acVoiceStream 2}
+
+
+
+ acVoiceStreamUploadPostUri OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..59))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Defines the URI used on the POST request, to upload voice data
+from the media server to a web server.
+This parameter is used only when using the HTTP POST for recording
+and the command is not issued by the Lib (tpncp protocol).
+The path needs to be set to the upload script on the web server.
+
+.
+Access: Offline.
+AC INI-Param: N/A"
+ ::= {acVoiceStream 3}
+
+
+
+ acSysAMS OBJECT IDENTIFIER ::= {acSystemConfiguration 10}
+
+
+ acSysAMSProfile OBJECT-TYPE
+ SYNTAX Unsigned32 (0..7)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Enable/Disable AMS Advanced IVR play functionality.
+0 = Disable
+1 = Enable.
+Access: Offline.
+AC INI-Param: AMSProfile"
+ ::= {acSysAMS 1}
+
+
+
+ acSysAMSApsIpAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Sets the destination UDP port to which the Heartbeat Packets
+are sent.
+Range = IP address in dotted notation
+xxx.xxx.xxx.xxx
+Default = 0.0.0.0.
+Access: Offline.
+AC INI-Param: HeartbeatDestIP"
+ ::= {acSysAMS 2}
+
+
+
+ acSysAMSApsPort OBJECT-TYPE
+ SYNTAX Unsigned32 (0..64000)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Sets the destination UDP port to which the heartbeat packets
+are sent.
+Access: Offline.
+AC INI-Param: HeartbeatDestPort"
+ ::= {acSysAMS 3}
+
+
+
+ acSysAMSPrimaryLanguage OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..3))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Defines the Primary Language for the AMS.
+Range = String[3] - language ISO string.
+Access: Instant.
+AC INI-Param: AMSPrimaryLanguage"
+ ::= {acSysAMS 4}
+
+
+
+ acSysAMSSecondaryLanguage OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..3))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Defines the Secondary Language for the AMS.
+Range = String[3] - language ISO string.
+Access: Instant.
+AC INI-Param: AMSSecondaryLanguage"
+ ::= {acSysAMS 5}
+
+
+
+ acSysAMSAPSProfile OBJECT-TYPE
+ SYNTAX INTEGER {
+ vpDatProvidedAudio(0)
+,
+ apsProvidedAudio(1)
+
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Indicates if the system should expect to use APS bundle (vp.dat
+and segments.xml files), or if the system should expect
+the vp.dat file only. A 1 means that an APS bundle should be
+used. A 0 means that the system should use vp.dat only. The
+default setting is 1, meaning expect APS bundle.
+Access: Offline.
+AC INI-Param: APSEnabled"
+ ::= {acSysAMS 6}
+
+
+
+ acSysAMSForceRepositoryEnable OBJECT-TYPE
+ SYNTAX INTEGER {
+ disable(0)
+,
+ enable(1)
+
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Indicates that a new audio repository (consisting of VP and
+XML files) should always be uploaded to the board regardless
+of whether signals are still being played on the old repository.
+Access: Instant.
+AC INI-Param: AMSForceRepositoryUpdateEnabled"
+ ::= {acSysAMS 7}
+
+
+
+ acSysNetworkFileSystem OBJECT IDENTIFIER ::= {acSystemConfiguration 11}
+
+
+ -- ****************************************
+ -- acSysNFS table declaration
+ -- ****************************************
+ acSysNFSTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AcSysNFSEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ ""
+ ::= {acSysNetworkFileSystem 21}
+
+
+
+ -- ****************************************
+ -- acSysNFS table entry
+ -- ****************************************
+ acSysNFSEntry OBJECT-TYPE
+ SYNTAX AcSysNFSEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ ""
+ INDEX {acSysNFSIndex}
+ ::= {acSysNFSTable 1}
+
+
+
+ -- ****************************************
+ -- acSysNFS TABLE
+ -- ****************************************
+ AcSysNFSEntry ::= SEQUENCE {
+ acSysNFSIndex Unsigned32,
+ acSysNFSRowStatus RowStatus,
+ acSysNFSAction INTEGER,
+ acSysNFSActionRes INTEGER,
+ acSysNFSHostOrIP SnmpAdminString,
+ acSysNFSRootPath SnmpAdminString,
+ acSysNFSNfsVersion INTEGER,
+ acSysNFSAuthType INTEGER,
+ acSysNFSUID Unsigned32,
+ acSysNFSGID Unsigned32,
+ acSysNFSVlanType INTEGER
+ }
+
+
+
+ acSysNFSIndex OBJECT-TYPE
+ SYNTAX Unsigned32 (0..15)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Index Field for line. Internal parameter. Index can be up to
+15 in dependency of board type.
+AC INI-Param: NFSServers_Index"
+ ::= {acSysNFSEntry 1}
+
+
+
+ acSysNFSRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "ROWSTATUS field for line. Internal parameter.
+AC INI-Param: N/A"
+ ::= {acSysNFSEntry 2}
+
+
+
+ acSysNFSAction OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(0)
+
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Mangement Field for ACTIONS. Internal parameter.
+AC INI-Param: N/A"
+ ::= {acSysNFSEntry 3}
+
+
+
+ acSysNFSActionRes OBJECT-TYPE
+ SYNTAX INTEGER {
+ succeeded(0)
+
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Mangement Field for ACTIONS RESULT. Internal parameter.
+AC INI-Param: N/A"
+ ::= {acSysNFSEntry 4}
+
+
+
+ acSysNFSHostOrIP OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..39))
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The domain name or IP address of the NFS server. If a domain
+name is provided, then a DNS server must be configured.
+Access: Online.
+AC INI-Param: NFSServers_HostOrIP"
+ ::= {acSysNFSEntry 5}
+
+
+
+ acSysNFSRootPath OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..99))
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Path to the root of the exported file system.
+Access: Online.
+AC INI-Param: NFSServers_RootPath"
+ ::= {acSysNFSEntry 6}
+
+
+
+ acSysNFSNfsVersion OBJECT-TYPE
+ SYNTAX INTEGER {
+ v2(2)
+,
+ v3(3)
+
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "NFS version to use with this remote file system, 2 or 3 (default).
+Access: Online.
+AC INI-Param: NFSServers_NfsVersion"
+ ::= {acSysNFSEntry 7}
+
+
+
+ acSysNFSAuthType OBJECT-TYPE
+ SYNTAX INTEGER {
+ null(0)
+,
+ unix(1)
+
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Identifies the authentication method used with this remote file
+system, 0 for AUTH_NULL, 1 for AUTH_UNIX (default).
+Access: Online.
+AC INI-Param: NFSServers_AuthType"
+ ::= {acSysNFSEntry 8}
+
+
+
+ acSysNFSUID OBJECT-TYPE
+ SYNTAX Unsigned32 (0..2147483647)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "User ID used in authentication if using AUTH_UNIX. The default
+is 0.
+Access: Online.
+AC INI-Param: NFSServers_UID"
+ ::= {acSysNFSEntry 9}
+
+
+
+ acSysNFSGID OBJECT-TYPE
+ SYNTAX Unsigned32 (0..2147483647)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Group ID used in authentication if using AUTH_UNIX. The default
+is 1.
+Access: Online.
+AC INI-Param: NFSServers_GID"
+ ::= {acSysNFSEntry 10}
+
+
+
+ acSysNFSVlanType OBJECT-TYPE
+ SYNTAX INTEGER {
+ oam(0)
+,
+ media(1)
+
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The VLAN, OAM(0) or Media(1), to use when accessing this remote
+file system. The default is to use
+the media VLAN. This parameters applies only if multiple IP
+addresses are configured on this board.
+Access: Online.
+AC INI-Param: NFSServers_VlanType"
+ ::= {acSysNFSEntry 11}
+
+
+
+ acSysHA OBJECT IDENTIFIER ::= {acSystemConfiguration 12}
+
+
+ acSysHAGlobalIPAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-write
+ STATUS obsolete
+ DESCRIPTION
+ "Defines the M3K global IP address to be used by the active module
+in HA system. (Dotted format notation. e.g., 192.10.1.255).
+Range = Legal IP address.
+Access: Offline.
+AC INI-Param: M3KGlobalIpAddr"
+ ::= {acSysHA 1}
+
+
+
+ acSysHARemoteAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Defines the Maintenance IF IP address of the remote HA unit.
+Relevant to M4K and SW-SBC.
+Access: Offline.
+AC INI-Param: HARemoteAddress"
+ ::= {acSysHA 2}
+
+
+
+ acSysHARevertive OBJECT-TYPE
+ SYNTAX INTEGER {
+ disable(0)
+,
+ enable(1)
+
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "When enabled, unit with higher HA priority will take the active
+state in HA system.
+Relevant to M4K and SW-SBC.
+Access: Offline.
+AC INI-Param: HARevertiveEnabled"
+ ::= {acSysHA 3}
+
+
+
+ acSysHAPriority OBJECT-TYPE
+ SYNTAX Unsigned32 (1..10)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Enables the user to define the HA priority to decide if unit
+should be in Active or Redundant state (Valid only when acSysHARevertive
+is set)
+Relevant to M4K and SW-SBC.
+Access: Offline.
+AC INI-Param: HAPriority"
+ ::= {acSysHA 4}
+
+
+
+ acSysHARedundantPriority OBJECT-TYPE
+ SYNTAX Unsigned32 (1..10)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Enables the user to define the Redundant HA priority to decide
+if unit should be in Active or Redundant state. Valid range
+is 1-10.
+Relevant to M4K and SW-SBC.
+Access: Offline.
+AC INI-Param: N/A"
+ ::= {acSysHA 5}
+
+
+
+ acSysHAPingEnabled OBJECT-TYPE
+ SYNTAX INTEGER {
+ disable(0)
+,
+ enable(1)
+
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Enabling network monitor using ping to test reachability from
+defined source interface, a drop in reachability will trigger
+switch over to redundant unit.
+Access: Online.
+AC INI-Param: HAPingEnabled"
+ ::= {acSysHA 6}
+
+
+
+ acSysHAPingDestination OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Defines the ping destination IP address of HA network monitor
+reachability module.
+Access: Online.
+AC INI-Param: HAPingDestination"
+ ::= {acSysHA 7}
+
+
+
+ acSysHAPingSourceIfName OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..16))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Defines the ping source inteface to test for HA network monitor
+reachability module.
+Access: Online.
+AC INI-Param: HAPingSourceIfName"
+ ::= {acSysHA 8}
+
+
+
+ acSysHAPingTimeout OBJECT-TYPE
+ SYNTAX Unsigned32 (1..60)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Defines the ping time out value in seconds for HA network monitor
+reachability module.
+Access: Online.
+AC INI-Param: HAPingTimeout"
+ ::= {acSysHA 9}
+
+
+
+ acSysHAPingRetries OBJECT-TYPE
+ SYNTAX Unsigned32 (0..100)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Defines the ping retries value for HA network monitor reachability
+module.
+Access: Online.
+AC INI-Param: HAPingRetries"
+ ::= {acSysHA 10}
+
+
+
+ acSysTransmission OBJECT IDENTIFIER ::= {acSystemConfiguration 13}
+
+
+ acSysTransmissionType OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(0)
+,
+ opticalSonetSdh(1)
+,
+ copperDs3(2)
+,
+ copperE1Ds1(3)
+
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Sets the PSTN Transmission type for the board: optical SONET
+/ SDH or copper DS3.
+Access: Offline.
+AC INI-Param: PSTNTransmissionType"
+ ::= {acSysTransmission 1}
+
+
+
+ acSysTiming OBJECT IDENTIFIER ::= {acSystemConfiguration 14}
+
+
+ acSysTimingMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ standAlone(0)
+,
+ external(1)
+,
+ lineSync(2)
+
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Determines the PSTN Timing synchonization mode of the Gateway.
+One of the following values: TM_External_MODE(1)
+-External Timing mode - use the SAT trunks Centralized Line
+Timing to synchronize the Gateway with one of the PSTN interfaces.
+TM_LineSync_MODE(2)
+-Distributed Line Timing mode (for the 1610 boards)- without
+using the SAT timing module. TM_Standalone_MODE(0)
+-Non-synchronized mode - each board or TPM is synchronized
+internally from one of the PSTN interfaces without using the
+SAT timing module.
+Access: Online.
+AC INI-Param: TMMode"
+ ::= {acSysTiming 1}
+
+
+
+ acSysTimingValidationTime OBJECT-TYPE
+ SYNTAX Unsigned32 (0..15)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Reference validation time. Applicable for External timing and
+Line timing timing references. Range: 0 - 15 minutes. Resolution:
+1 minute.
+Access: Online.
+AC INI-Param: TMReferenceValidationTime"
+ ::= {acSysTiming 2}
+
+
+
+ acSysTimingClockToDeriveA OBJECT-TYPE
+ SYNTAX INTEGER {
+ deriveREFFromLineClock1(0)
+,
+ deriveInternalClock(4)
+,
+ clockFromReceiveSide(7)
+
+
+ }
+ MAX-ACCESS read-write
+ STATUS obsolete
+ DESCRIPTION
+ "Which Clock to use in sync mode.
+Access: Online.
+AC INI-Param: TMClockToDerive_A"
+ ::= {acSysTiming 3}
+
+
+
+ acSysTimingClockToDeriveB OBJECT-TYPE
+ SYNTAX INTEGER {
+ deriveREFFromLineClock1(0)
+,
+ deriveInternalClock(4)
+,
+ clockFromReceiveSide(7)
+
+
+ }
+ MAX-ACCESS read-write
+ STATUS obsolete
+ DESCRIPTION
+ "Which Clock to use in sync mode.
+Access: Online.
+AC INI-Param: TMClockToDerive_B"
+ ::= {acSysTiming 4}
+
+
+
+ acSysTimingExternalIFType OBJECT-TYPE
+ SYNTAX INTEGER {
+ e1CRC4(0)
+,
+ e1CAS(1)
+,
+ e1FAS(2)
+,
+ t1D4(3)
+,
+ t1ESF(4)
+,
+ t12(5)
+
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Defines the external line reference (BITS) transmission format.
+Access: Online.
+AC INI-Param: TMExternalIFType"
+ ::= {acSysTiming 5}
+
+
+
+ acSysTimingLoopBackRef1 OBJECT-TYPE
+ SYNTAX INTEGER {
+ loopDisable(0)
+,
+ loopEnable(1)
+
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Enables loopback state, by connecting Rx path towards Tx path.
+Access: Online.
+AC INI-Param: TMLoopBackExternalRef1"
+ ::= {acSysTiming 6}
+
+
+
+ acSysTimingLoopBackRef2 OBJECT-TYPE
+ SYNTAX INTEGER {
+ loopDisable(0)
+,
+ loopEnable(1)
+
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Enables loopback state, by connecting Rx path towards Tx path.
+Access: Online.
+AC INI-Param: TMLoopBackExternalRef2"
+ ::= {acSysTiming 7}
+
+
+
+ acSysTimingTransmitControl OBJECT-TYPE
+ SYNTAX INTEGER {
+ systemClock(0)
+,
+ aIS(1)
+,
+ disableTransmit(2)
+
+ }
+ MAX-ACCESS read-write
+ STATUS obsolete
+ DESCRIPTION
+ "Enables loopback state, by connecting Rx path towards Tx path.
+Access: Online.
+AC INI-Param: TMTransmitControl"
+ ::= {acSysTiming 8}
+
+
+
+ acSysTimingE1LineBuildOut OBJECT-TYPE
+ SYNTAX INTEGER {
+ tm75OhmNormal(0)
+,
+ tm120OhmNormal(1)
+,
+ tm75OhmHighReturnLoss(4)
+,
+ tm120OhmHighReturnLoss(5)
+,
+ tm75OhmNormalGappedClock(6)
+,
+ tm120OhmNormalGappedClock(7)
+
+ }
+ MAX-ACCESS read-write
+ STATUS obsolete
+ DESCRIPTION
+ "Sets the transmission power between the timing module on the
+SAT and the E1 external reference clock (ohms). This parameter
+is only relevant for the Mediant 3000.This parameter is
+enabled when bspTimingModuleCfgTimingMode is set to TM_External_MODE(1).
+
+One of the following values: E_75_OHM_with_high_return_loss(4),E_120_OHM_with_high_return_loss(5),E_75_OHM_normal_PLUS_enable_transmit_and_receive_gapped_clock(6),E_120_OHM_normal_PLUS_enable_transmit_and_receive_gapped_clock(7),E_75_OHM_normal(0),E_120_OHM_normal(1).
+Access: Online.
+AC INI-Param: TME1LineBuildOut "
+ ::= {acSysTiming 9}
+
+
+
+ acSysTimingT1LineBuildOut OBJECT-TYPE
+ SYNTAX INTEGER {
+ dSX10to133feet0dBCSU(0)
+,
+ dSX1133to266feet(1)
+,
+ dSX1266to399feet(2)
+,
+ dSX1399to533feet(3)
+,
+ dSX1533to655feet(4)
+,
+ dSX10to133ft0dBgappedclock(7)
+
+ }
+ MAX-ACCESS read-write
+ STATUS obsolete
+ DESCRIPTION
+ "External Reference Transmit Line Build Out.
+Access: Online.
+AC INI-Param: TMT1LineBuildOut"
+ ::= {acSysTiming 10}
+
+
+
+ acSysLDAP OBJECT IDENTIFIER ::= {acSystemConfiguration 15}
+
+
+ acSysLDAPServerIp OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-write
+ STATUS deprecated
+ DESCRIPTION
+ "This parameter defines the IP address in dotted format notation.
+e.g., 192.10.1.255
+Range = Legal IP address.
+Access: Online.
+AC INI-Param: LDAPSERVERIP"
+ ::= {acSysLDAP 1}
+
+
+
+ acSysLDAPServerPort OBJECT-TYPE
+ SYNTAX Unsigned32 (0..65535)
+ MAX-ACCESS read-write
+ STATUS deprecated
+ DESCRIPTION
+ "Defines the port number for the LDAP server.
+Range = Valid port number.
+Access: Online.
+AC INI-Param: LDAPSERVERPORT"
+ ::= {acSysLDAP 2}
+
+
+
+ acSysLDAPServerMaxRespondTime OBJECT-TYPE
+ SYNTAX Unsigned32 (0..86400)
+ MAX-ACCESS read-write
+ STATUS deprecated
+ DESCRIPTION
+ "Defines the period of time the module will wait for LDAP server
+response (seconds).
+Access: Instant.
+AC INI-Param: LDAPSERVERMAXRESPONDTIME"
+ ::= {acSysLDAP 3}
+
+
+
+ acSysLDAPServerDomainName OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..255))
+ MAX-ACCESS read-write
+ STATUS deprecated
+ DESCRIPTION
+ "This parameter is used to indicate the name of LDAP server.
+Access: Online.
+AC INI-Param: LDAPSERVERDOMAINNAME"
+ ::= {acSysLDAP 4}
+
+
+
+ acSysLDAPSearchDN OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..255))
+ MAX-ACCESS read-write
+ STATUS deprecated
+ DESCRIPTION
+ "This parameter is used to indicate the search DN for LDAP search
+request.
+Access: Online.
+AC INI-Param: LDAPSEARCHDN"
+ ::= {acSysLDAP 5}
+
+
+
+ acSysLDAPPassword OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..255))
+ MAX-ACCESS read-write
+ STATUS deprecated
+ DESCRIPTION
+ "This parameter is used to indicate the user password of LDAP
+server.
+Access: Online.
+AC INI-Param: LDAPPASSWORD"
+ ::= {acSysLDAP 6}
+
+
+
+ acSysLDAPBindDN OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..255))
+ MAX-ACCESS read-write
+ STATUS deprecated
+ DESCRIPTION
+ "This parameter is used to indicate the of LDAP server bind DN.
+Access: Online.
+AC INI-Param: LDAPBINDDN"
+ ::= {acSysLDAP 7}
+
+
+
+ acSysLDAPServiceEnable OBJECT-TYPE
+ SYNTAX INTEGER {
+ disable(0)
+,
+ enable(1)
+
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Used to either enable or disable LDAP service.
+
+0- disable (default)
+1 - enable.
+Access: Offline.
+AC INI-Param: LDAPSERVICEENABLE"
+ ::= {acSysLDAP 8}
+
+
+
+ acSysLDAPCacheEnable OBJECT-TYPE
+ SYNTAX INTEGER {
+ disable(0)
+,
+ enable(1)
+
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Enables/Disable using the cashe in LDAP.
+
+0- disable (default)
+1 - enable.
+Access: Offline.
+AC INI-Param: LDAPCACHEENABLE"
+ ::= {acSysLDAP 9}
+
+
+
+ acSysLDAPCacheEntryTimeout OBJECT-TYPE
+ SYNTAX Unsigned32 (0..2147483647)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The time (in seconds) that an entry in the LDAP cache is valid.
+Access: Online.
+AC INI-Param: LDAPCACHEENTRYTIMEOUT"
+ ::= {acSysLDAP 10}
+
+
+
+ acSysLDAPCacheEntryRemovalTimeout OBJECT-TYPE
+ SYNTAX Unsigned32 (0..2147483647)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The time (in seconds) that an entry in the LDAP cache is removed
+from cache.
+Access: Online.
+AC INI-Param: LDAPCACHEENTRYREMOVALTIMEOUT"
+ ::= {acSysLDAP 11}
+
+
+
+ asSysNqm OBJECT IDENTIFIER ::= {acSystemConfiguration 16}
+
+
+ -- ****************************************
+ -- acSysNqmSender table declaration
+ -- ****************************************
+ acSysNqmSenderTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AcSysNqmSenderEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ ""
+ ::= {asSysNqm 21}
+
+
+
+ -- ****************************************
+ -- acSysNqmSender table entry
+ -- ****************************************
+ acSysNqmSenderEntry OBJECT-TYPE
+ SYNTAX AcSysNqmSenderEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ ""
+ INDEX {acSysNqmSenderIndex}
+ ::= {acSysNqmSenderTable 1}
+
+
+
+ -- ****************************************
+ -- acSysNqmSender TABLE
+ -- ****************************************
+ AcSysNqmSenderEntry ::= SEQUENCE {
+ acSysNqmSenderIndex Unsigned32,
+ acSysNqmSenderRowStatus RowStatus,
+ acSysNqmSenderAction INTEGER,
+ acSysNqmSenderActionRes INTEGER,
+ acSysNqmSenderSenderName SnmpAdminString,
+ acSysNqmSenderActive INTEGER,
+ acSysNqmSenderTargetIpAddress SnmpAdminString,
+ acSysNqmSenderTargetPort Unsigned32,
+ acSysNqmSenderPacketInterval Unsigned32,
+ acSysNqmSenderPayloadSize Unsigned32,
+ acSysNqmSenderIpTos Unsigned32,
+ acSysNqmSenderTimeout Unsigned32,
+ acSysNqmSenderRttThreshold Unsigned32,
+ acSysNqmSenderJitterThreshold Unsigned32,
+ acSysNqmSenderPacketLossThershold Unsigned32,
+ acSysNqmSenderProbingConfigName RowPointer,
+ acSysNqmSenderSourceInterfaceName RowPointer
+ }
+
+
+
+ acSysNqmSenderIndex OBJECT-TYPE
+ SYNTAX Unsigned32 (0..9)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Index Field for line. Internal parameter.
+AC INI-Param: NqmSenderTable_Index"
+ ::= {acSysNqmSenderEntry 1}
+
+
+
+ acSysNqmSenderRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "ROWSTATUS field for line. Internal parameter.
+AC INI-Param: NqmSenderTable_RowStatus"
+ ::= {acSysNqmSenderEntry 2}
+
+
+
+ acSysNqmSenderAction OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(0)
+
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Mangement Field for ACTIONS. Internal parameter.
+AC INI-Param: NqmSenderTable_Action"
+ ::= {acSysNqmSenderEntry 3}
+
+
+
+ acSysNqmSenderActionRes OBJECT-TYPE
+ SYNTAX INTEGER {
+ succeeded(0)
+
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Mangement Field for ACTIONS RESULT. Internal parameter.
+AC INI-Param: NqmSenderTable_ActionRes"
+ ::= {acSysNqmSenderEntry 4}
+
+
+
+ acSysNqmSenderSenderName OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..64))
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Sender descriptive name.
+Access: Online.
+AC INI-Param: NqmSenderTable_SenderName"
+ ::= {acSysNqmSenderEntry 5}
+
+
+
+ acSysNqmSenderActive OBJECT-TYPE
+ SYNTAX INTEGER {
+ disable(0)
+,
+ enable(1)
+
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Sender enable.
+Access: Online.
+AC INI-Param: NqmSenderTable_Active"
+ ::= {acSysNqmSenderEntry 6}
+
+
+
+ acSysNqmSenderTargetIpAddress OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..45))
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Target IP address.
+Access: Online.
+AC INI-Param: NqmSenderTable_TargetIpAddress"
+ ::= {acSysNqmSenderEntry 7}
+
+
+
+ acSysNqmSenderTargetPort OBJECT-TYPE
+ SYNTAX Unsigned32 (3900..3990)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Target transport layer port number.
+Ports are: 3900, 3910, 3920, 3930, 3940, 3950, 3960, 3970,
+3980, 3990.
+Access: Online.
+AC INI-Param: NqmSenderTable_TargetPort"
+ ::= {acSysNqmSenderEntry 8}
+
+
+
+ acSysNqmSenderPacketInterval OBJECT-TYPE
+ SYNTAX Unsigned32 (5..1000)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Interval between each packet transmitting [msec].
+Access: Online.
+AC INI-Param: NqmSenderTable_PacketInterval"
+ ::= {acSysNqmSenderEntry 9}
+
+
+
+ acSysNqmSenderPayloadSize OBJECT-TYPE
+ SYNTAX Unsigned32 (28..1420)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Size of IP payload [bytes].
+Access: Online.
+AC INI-Param: NqmSenderTable_PayloadSize"
+ ::= {acSysNqmSenderEntry 10}
+
+
+
+ acSysNqmSenderIpTos OBJECT-TYPE
+ SYNTAX Unsigned32 (0..255)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "TOS value in the IP header.
+Access: Online.
+AC INI-Param: NqmSenderTable_IpTos"
+ ::= {acSysNqmSenderEntry 11}
+
+
+
+ acSysNqmSenderTimeout OBJECT-TYPE
+ SYNTAX Unsigned32 (0..32000)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Receive timeout on expected packet.
+Access: Online.
+AC INI-Param: NqmSenderTable_Timeout"
+ ::= {acSysNqmSenderEntry 12}
+
+
+
+ acSysNqmSenderRttThreshold OBJECT-TYPE
+ SYNTAX Unsigned32 (0..32000)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Maximum allowable Round Trip Time [msec], if exceeded some action
+is needed.
+Access: Online.
+AC INI-Param: NqmSenderTable_RttThreshold"
+ ::= {acSysNqmSenderEntry 13}
+
+
+
+ acSysNqmSenderJitterThreshold OBJECT-TYPE
+ SYNTAX Unsigned32 (0..32000)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Maximum allowable Jitter [msec], if exceeded some action is
+needed.
+Access: Online.
+AC INI-Param: NqmSenderTable_JitterThreshold"
+ ::= {acSysNqmSenderEntry 14}
+
+
+
+ acSysNqmSenderPacketLossThershold OBJECT-TYPE
+ SYNTAX Unsigned32 (0..32000)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Maximum allowable Packet Loss, if exceeded some action is needed.
+Access: Online.
+AC INI-Param: NqmSenderTable_PacketLossThershold"
+ ::= {acSysNqmSenderEntry 15}
+
+
+
+ acSysNqmSenderProbingConfigName OBJECT-TYPE
+ SYNTAX RowPointer
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Name of corresponding probe in probing table.
+Access: Online.
+AC INI-Param: NqmSenderTable_ProbingConfigName"
+ ::= {acSysNqmSenderEntry 16}
+
+
+
+ acSysNqmSenderSourceInterfaceName OBJECT-TYPE
+ SYNTAX RowPointer
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Name of source interface.
+Access: Online.
+AC INI-Param: NqmSenderTable_SourceInterfaceName"
+ ::= {acSysNqmSenderEntry 17}
+
+
+
+ -- ****************************************
+ -- acSysNqmProbing table declaration
+ -- ****************************************
+ acSysNqmProbingTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AcSysNqmProbingEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ ""
+ ::= {asSysNqm 22}
+
+
+
+ -- ****************************************
+ -- acSysNqmProbing table entry
+ -- ****************************************
+ acSysNqmProbingEntry OBJECT-TYPE
+ SYNTAX AcSysNqmProbingEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ ""
+ INDEX {acSysNqmProbingIndex}
+ ::= {acSysNqmProbingTable 1}
+
+
+
+ -- ****************************************
+ -- acSysNqmProbing TABLE
+ -- ****************************************
+ AcSysNqmProbingEntry ::= SEQUENCE {
+ acSysNqmProbingIndex Unsigned32,
+ acSysNqmProbingRowStatus RowStatus,
+ acSysNqmProbingAction INTEGER,
+ acSysNqmProbingActionRes INTEGER,
+ acSysNqmProbingProbeName SnmpAdminString,
+ acSysNqmProbingDuration Unsigned32,
+ acSysNqmProbingFrequency Unsigned32,
+ acSysNqmProbingLifeSpan Unsigned32,
+ acSysNqmProbingStartTime SnmpAdminString,
+ acSysNqmProbingHistoryEntriesToKeep Unsigned32
+ }
+
+
+
+ acSysNqmProbingIndex OBJECT-TYPE
+ SYNTAX Unsigned32 (0..9)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Index Field for line. Internal parameter.
+AC INI-Param: NqmProbingTable_Index"
+ ::= {acSysNqmProbingEntry 1}
+
+
+
+ acSysNqmProbingRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "ROWSTATUS field for line. Internal parameter.
+AC INI-Param: NqmProbingTable_RowStatus"
+ ::= {acSysNqmProbingEntry 2}
+
+
+
+ acSysNqmProbingAction OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(0)
+
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Mangement Field for ACTIONS. Internal parameter.
+AC INI-Param: NqmProbingTable_Action"
+ ::= {acSysNqmProbingEntry 3}
+
+
+
+ acSysNqmProbingActionRes OBJECT-TYPE
+ SYNTAX INTEGER {
+ succeeded(0)
+
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Mangement Field for ACTIONS RESULT. Internal parameter.
+AC INI-Param: NqmProbingTable_ActionRes"
+ ::= {acSysNqmProbingEntry 4}
+
+
+
+ acSysNqmProbingProbeName OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..64))
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Probe descriptive name.
+Access: Online.
+AC INI-Param: NqmProbingTable_ProbeName"
+ ::= {acSysNqmProbingEntry 5}
+
+
+
+ acSysNqmProbingDuration OBJECT-TYPE
+ SYNTAX Unsigned32 (20..32000)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Duration of probing session [sec].
+Access: Online.
+AC INI-Param: NqmProbingTable_Duration"
+ ::= {acSysNqmProbingEntry 6}
+
+
+
+ acSysNqmProbingFrequency OBJECT-TYPE
+ SYNTAX Unsigned32 (0..32000)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Time interval between the start of two consecutive probing sessions
+ [sec].
+Access: Online.
+AC INI-Param: NqmProbingTable_Frequency"
+ ::= {acSysNqmProbingEntry 7}
+
+
+
+ acSysNqmProbingLifeSpan OBJECT-TYPE
+ SYNTAX Unsigned32 (0..2000000000)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Life span of this probe [sec].
+Access: Online.
+AC INI-Param: NqmProbingTable_LifeSpan"
+ ::= {acSysNqmProbingEntry 8}
+
+
+
+ acSysNqmProbingStartTime OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..64))
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "start time of this probe - now | pending | yyyy:MM:dd:HH:mm:ss.
+Access: Online.
+AC INI-Param: NqmProbingTable_StartTime"
+ ::= {acSysNqmProbingEntry 9}
+
+
+
+ acSysNqmProbingHistoryEntriesToKeep OBJECT-TYPE
+ SYNTAX Unsigned32 (1..1000)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Number of probing result entries to keep in the history file.
+Access: Online.
+AC INI-Param: NqmProbingTable_HistoryEntriesToKeep"
+ ::= {acSysNqmProbingEntry 10}
+
+
+
+ -- ****************************************
+ -- acSysNqmResponder table declaration
+ -- ****************************************
+ acSysNqmResponderTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AcSysNqmResponderEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ ""
+ ::= {asSysNqm 23}
+
+
+
+ -- ****************************************
+ -- acSysNqmResponder table entry
+ -- ****************************************
+ acSysNqmResponderEntry OBJECT-TYPE
+ SYNTAX AcSysNqmResponderEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ ""
+ INDEX {acSysNqmResponderIndex}
+ ::= {acSysNqmResponderTable 1}
+
+
+
+ -- ****************************************
+ -- acSysNqmResponder TABLE
+ -- ****************************************
+ AcSysNqmResponderEntry ::= SEQUENCE {
+ acSysNqmResponderIndex Unsigned32,
+ acSysNqmResponderRowStatus RowStatus,
+ acSysNqmResponderAction INTEGER,
+ acSysNqmResponderActionRes INTEGER,
+ acSysNqmResponderResponderName SnmpAdminString,
+ acSysNqmResponderActive Unsigned32,
+ acSysNqmResponderLocalPort Unsigned32,
+ acSysNqmResponderSourceInterfaceName RowPointer
+ }
+
+
+
+ acSysNqmResponderIndex OBJECT-TYPE
+ SYNTAX Unsigned32 (0..9)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Index Field for line. Internal parameter.
+AC INI-Param: NqmResponderTable_Index"
+ ::= {acSysNqmResponderEntry 1}
+
+
+
+ acSysNqmResponderRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "ROWSTATUS field for line. Internal parameter.
+AC INI-Param: NqmResponderTable_RowStatus"
+ ::= {acSysNqmResponderEntry 2}
+
+
+
+ acSysNqmResponderAction OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(0)
+
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Mangement Field for ACTIONS. Internal parameter.
+AC INI-Param: NqmResponderTable_Action"
+ ::= {acSysNqmResponderEntry 3}
+
+
+
+ acSysNqmResponderActionRes OBJECT-TYPE
+ SYNTAX INTEGER {
+ succeeded(0)
+
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Mangement Field for ACTIONS RESULT. Internal parameter.
+AC INI-Param: NqmResponderTable_ActionRes"
+ ::= {acSysNqmResponderEntry 4}
+
+
+
+ acSysNqmResponderResponderName OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..64))
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Responder descriptive name.
+Access: Online.
+AC INI-Param: NqmResponderTable_ResponderName"
+ ::= {acSysNqmResponderEntry 5}
+
+
+
+ acSysNqmResponderActive OBJECT-TYPE
+ SYNTAX Unsigned32 (0..1)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Responder Enable.
+Access: Online.
+AC INI-Param: NqmResponderTable_Active"
+ ::= {acSysNqmResponderEntry 6}
+
+
+
+ acSysNqmResponderLocalPort OBJECT-TYPE
+ SYNTAX Unsigned32 (3900..3990)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Local transport layer port number.
+Ports are: 3900, 3910, 3920, 3930, 3940, 3950, 3960, 3970,
+3980, 3990.
+Access: Online.
+AC INI-Param: NqmResponderTable_LocalPort"
+ ::= {acSysNqmResponderEntry 7}
+
+
+
+ acSysNqmResponderSourceInterfaceName OBJECT-TYPE
+ SYNTAX RowPointer
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Name of source interface.
+Access: Online.
+AC INI-Param: NqmResponderTable_SourceInterfaceName"
+ ::= {acSysNqmResponderEntry 8}
+
+
+
+ acSystemStatus OBJECT IDENTIFIER ::= {acSystem 2}
+
+
+ acSysType OBJECT IDENTIFIER ::= {acSystemStatus 1}
+
+
+ acSysTypeProduct OBJECT-TYPE
+ SYNTAX INTEGER {
+ acUnknown(0)
+,
+ acTrunkPack-08(1)
+,
+ acMediaPack-108(2)
+,
+ acMediaPack-124(3)
+,
+ acTrunkPack-1600(20)
+,
+ acTPM1100(22)
+,
+ acTrunkPack-260-IpMedia(23)
+,
+ acTrunkPack-1610(24)
+,
+ acMediaPack-104(25)
+,
+ acMediaPack-102(26)
+,
+ acTrunkPack-1610-SB(29)
+,
+ acTrunkPack-1610-IpMedia(30)
+,
+ acTrunkPack-MEDIANT2000(31)
+,
+ acTrunkPack-STRETTO2000(32)
+,
+ acTrunkPack-IPMServer2000(33)
+,
+ acTrunkPack-2810(34)
+,
+ acTrunkPack-260-UN-IpMedia (35)
+,
+ acTrunkPack-260-IpMedia-30Ch(36)
+,
+ acTrunkPack-260-IpMedia-60Ch(37)
+,
+ acTrunkPack-260-IpMedia-120Ch(38)
+,
+ acTrunkPack-260RT-IpMedia-30Ch(39)
+,
+ acTrunkPack-260RT-IpMedia-60Ch(40)
+,
+ acTrunkPack-260RT-IpMedia-120Ch(41)
+,
+ acTrunkPack-260(42)
+,
+ acTrunkPack-260-UN (43)
+,
+ acTPM1100-PCM(44)
+,
+ acTrunkPack-6310(45)
+,
+ acTPM6300(46)
+,
+ acMediant1000(47)
+,
+ acIPMedia3000(48)
+,
+ acMediant3000(49)
+,
+ acStretto3000(50)
+,
+ acTrunkPack-6310-IpMedia(51)
+,
+ acTrunkPack-6310-SB(52)
+,
+ acATP-1610(53)
+,
+ acATP-260(54)
+,
+ acATP-260-UN(55)
+,
+ acMediaPack-118(56)
+,
+ acMediaPack114(57)
+,
+ acMediaPack112(58)
+,
+ acTrunkPack-6310-T3(59)
+,
+ acMediant3000-T3(60)
+,
+ acIPmedia3000-T3(61)
+,
+ acTrunkPack-6310-T3-IpMedia(62)
+,
+ acTrunkPack-8410(63)
+,
+ acTrunkPack-8410-IpMedia(64)
+,
+ acMediant-600(65)
+,
+ acTrunkPack-12610(66)
+,
+ acMediant1000-MSBG(67)
+,
+ acMediant-600-MSBG(68)
+,
+ acMediant800-MSBG(69)
+,
+ acMediant-4000(70)
+,
+ acMediant1000-ESBC(71)
+,
+ acMediant800-ESBC(72)
+,
+ acHosted(73)
+,
+ acMediant-850-MSBG(74)
+,
+ acMediant-850-ESBC(75)
+,
+ acMediant-500-MSBG(76)
+,
+ acMediant-500-ESBC(77)
+,
+ acMediant-2600(78)
+,
+ acMediant-VE-SBC(79)
+,
+ acMediant-VE-H-SBC(80)
+,
+ acMediant-SE-SBC(81)
+,
+ acMediant-SE-H-SBC(82)
+,
+ acMediant-6000-SBC(83)
+,
+ acMediant-500L-MSBG(84)
+,
+ acMediant-500L-ESBC(85)
+
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The type of the Board.
+AC INI-Param: N/A"
+ ::= {acSysType 1}
+
+
+
+ acSysTypeDSP OBJECT-TYPE
+ SYNTAX Unsigned32 (0..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Dsp Type.
+AC INI-Param: N/A"
+ ::= {acSysType 2}
+
+
+
+ acSysTypeModule OBJECT-TYPE
+ SYNTAX INTEGER {
+ soloist (0)
+,
+ second(1)
+,
+ first(2)
+
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+AC INI-Param: N/A"
+ ::= {acSysType 3}
+
+
+
+ acSysTypeCPUSpeed OBJECT-TYPE
+ SYNTAX Unsigned32 (0..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "CPU Speed.
+AC INI-Param: N/A"
+ ::= {acSysType 4}
+
+
+
+ acSysVersion OBJECT IDENTIFIER ::= {acSystemStatus 2}
+
+
+ acSysVersionSoftware OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..20))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "TrunkPack Software Version.
+AC INI-Param: N/A"
+ ::= {acSysVersion 1}
+
+
+
+ acSysVersionFlash OBJECT-TYPE
+ SYNTAX Unsigned32 (0..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Flash [BootLoader] Version.
+AC INI-Param: N/A"
+ ::= {acSysVersion 2}
+
+
+
+ acSysVersionIniFile OBJECT-TYPE
+ SYNTAX Unsigned32 (0..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Ini file version.
+AC INI-Param: INIFileVersion"
+ ::= {acSysVersion 3}
+
+
+
+ acSysVersionSoftwareDate OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..40))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "TrunkPack Software Date.
+AC INI-Param: N/A"
+ ::= {acSysVersion 4}
+
+
+
+ acSysId OBJECT IDENTIFIER ::= {acSystemStatus 3}
+
+
+ acSysIdName OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..20))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The name fo the board.
+AC INI-Param: N/A"
+ ::= {acSysId 1}
+
+
+
+ acSysIdSerialNumber OBJECT-TYPE
+ SYNTAX Unsigned32 (0..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "serial number of board.
+AC INI-Param: N/A"
+ ::= {acSysId 2}
+
+
+
+ acSysIdSlotNumber OBJECT-TYPE
+ SYNTAX Unsigned32 (0..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Slot number.
+AC INI-Param: N/A"
+ ::= {acSysId 3}
+
+
+
+ acSysIdFirstSerialNumber OBJECT-TYPE
+ SYNTAX Unsigned32 (0..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The device's first serial number.
+When the device is part of a dual module board this is the
+first module's serial number.
+When the device is the first module in a dual module or the
+device is not in a dual module board, the values for asSysIdSerialNumber
+and acSysIdFirstSerialNumber are the same.
+AC INI-Param: N/A"
+ ::= {acSysId 4}
+
+
+
+ acSysCount OBJECT IDENTIFIER ::= {acSystemStatus 4}
+
+
+ acSysCountDSPs OBJECT-TYPE
+ SYNTAX Unsigned32 (0..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "DSP Count.
+AC INI-Param: N/A"
+ ::= {acSysCount 1}
+
+
+
+ acSysCountChannels OBJECT-TYPE
+ SYNTAX Unsigned32 (0..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Channel Count.
+Analog or Mixed board - the returned value is the number of
+analog channels.
+Digital board - the number of digitial channels.
+AC INI-Param: N/A"
+ ::= {acSysCount 2}
+
+
+
+ acSysCountTrunks OBJECT-TYPE
+ SYNTAX Unsigned32 (0..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Trunks Count.
+AC INI-Param: N/A"
+ ::= {acSysCount 3}
+
+
+
+ acSysState OBJECT IDENTIFIER ::= {acSystemStatus 5}
+
+
+ acSysStateTemperature OBJECT-TYPE
+ SYNTAX Unsigned32 (0..100)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Temperature of the board in degrees Celsius, should not go higher
+then 60!.
+AC INI-Param: N/A"
+ ::= {acSysState 1}
+
+
+
+ acSysStateOperational OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(1)
+,
+ enabled(2)
+
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The operational state of the gateway.
+AC INI-Param: N/A"
+ ::= {acSysState 2}
+
+
+
+ acSysStateHAupdateInProgress OBJECT-TYPE
+ SYNTAX INTEGER {
+ updateDone(1)
+,
+ updateInProgress(2)
+
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates during update process, which done between active and
+redundant boards.
+AC INI-Param: N/A"
+ ::= {acSysState 3}
+
+
+
+ acSysStateGWSeverity OBJECT-TYPE
+ SYNTAX INTEGER {
+ noAlarm(0)
+,
+ indeterminate(1)
+,
+ warning(2)
+,
+ minor(3)
+,
+ major(4)
+,
+ critical(5)
+
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The highest alarm severity on the device.
+AC INI-Param: N/A"
+ ::= {acSysState 4}
+
+
+
+ acSysStateIsPstnManagementEnable OBJECT-TYPE
+ SYNTAX INTEGER {
+ disable(0)
+,
+ enable(1)
+
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Is Pstn Management Enable
+0 - Disable
+1 - Enable.
+AC INI-Param: N/A"
+ ::= {acSysState 5}
+
+
+
+ acSysStateErrorMessage OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..512))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Error Messages from the board.
+AC INI-Param: N/A"
+ ::= {acSysState 6}
+
+
+
+ acSysStateErrorID OBJECT-TYPE
+ SYNTAX Unsigned32 (0..2147483647)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Error Message ID.
+Access: Instant.
+AC INI-Param: N/A"
+ ::= {acSysState 7}
+
+
+
+ acSysStateDataCpuUtilization OBJECT-TYPE
+ SYNTAX Unsigned32 (0..100)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Data CPU usage in percentage.
+AC INI-Param: N/A"
+ ::= {acSysState 8}
+
+
+
+ acSysStateDataMemoryUtilization OBJECT-TYPE
+ SYNTAX Unsigned32 (0..100)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Data memory usage in percentage.
+AC INI-Param: N/A"
+ ::= {acSysState 9}
+
+
+
+ acSysNetwork OBJECT IDENTIFIER ::= {acSystemStatus 6}
+
+
+ acSysEthernet OBJECT IDENTIFIER ::= {acSysNetwork 1}
+
+
+ acSysEthernetFirstPortDuplexMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ halfDuplex(0)
+,
+ fullDuplex(1)
+,
+ forceModeValue(2)
+,
+ notAvailable(3)
+
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "full-duplex or half-duplex connection.
+AC INI-Param: N/A"
+ ::= {acSysEthernet 1}
+
+
+
+ acSysEthernetFirstPortSpeed OBJECT-TYPE
+ SYNTAX INTEGER {
+ forceModeValue(2)
+,
+ notAvailable(3)
+,
+ ac10Mbps(10)
+,
+ ac100Mbps(100)
+,
+ ac1000Mbps(1000)
+
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+AC INI-Param: N/A"
+ ::= {acSysEthernet 2}
+
+
+
+ acSysEthernetSecondPortDuplexMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ halfDuplex(0)
+,
+ fullDuplex(1)
+,
+ forceModeValue(2)
+,
+ notAvailable(3)
+
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "full-duplex or half-duplex connection.
+AC INI-Param: N/A"
+ ::= {acSysEthernet 3}
+
+
+
+ acSysEthernetSecondPortSpeed OBJECT-TYPE
+ SYNTAX INTEGER {
+ forceModeValue(2)
+,
+ notAvailable(3)
+,
+ ac10Mbps(10)
+,
+ ac100Mbps(100)
+,
+ ac1000Mbps(1000)
+
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+AC INI-Param: N/A"
+ ::= {acSysEthernet 4}
+
+
+
+ acSysEthernetActivePortNumber OBJECT-TYPE
+ SYNTAX Unsigned32 (0..2)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Display the current active ethernet port number.
+0 - not relevant.
+AC INI-Param: N/A"
+ ::= {acSysEthernet 5}
+
+
+
+ acSysEthernetPowerBudget OBJECT-TYPE
+ SYNTAX Unsigned32 (0..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Display the availbale power budget for the system.
+AC INI-Param: N/A"
+ ::= {acSysEthernet 6}
+
+
+
+ acSysEthernetPowerAllocated OBJECT-TYPE
+ SYNTAX Unsigned32 (0..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Display the allocated power in the system.
+AC INI-Param: N/A"
+ ::= {acSysEthernet 7}
+
+
+
+ acSysEthernetPowerRemaining OBJECT-TYPE
+ SYNTAX Unsigned32 (0..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Display the availbale remaining power in the system.
+AC INI-Param: N/A"
+ ::= {acSysEthernet 8}
+
+
+
+ -- ****************************************
+ -- acSysEthernetStatus table declaration
+ -- ****************************************
+ acSysEthernetStatusTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AcSysEthernetStatusEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Ethernet relevant information"
+ ::= {acSysEthernet 21}
+
+
+
+ -- ****************************************
+ -- acSysEthernetStatus table entry
+ -- ****************************************
+ acSysEthernetStatusEntry OBJECT-TYPE
+ SYNTAX AcSysEthernetStatusEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ ""
+ INDEX {acSysEthernetStatusIndex}
+ ::= {acSysEthernetStatusTable 1}
+
+
+
+ -- ****************************************
+ -- acSysEthernetStatus TABLE
+ -- ****************************************
+ AcSysEthernetStatusEntry ::= SEQUENCE {
+ acSysEthernetStatusIndex Unsigned32,
+ acSysEthernetStatusPortDuplexMode INTEGER,
+ acSysEthernetStatusPortSpeed INTEGER,
+ acSysEthernetStatusActivePortNumber INTEGER,
+ acSysEthernetStatusPortState INTEGER,
+ acSysEthernetStatusPowerOverEthernet INTEGER,
+ acSysEthernetStatusAllocatedPower SnmpAdminString,
+ acSysEthernetStatusGroup SnmpAdminString,
+ acSysEthernetStatusPowerOverEthernetDetails SnmpAdminString
+ }
+
+
+
+ acSysEthernetStatusIndex OBJECT-TYPE
+ SYNTAX Unsigned32 (1..12)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The row's index.
+On 8410 Systems:
+Index 1 – related to GBE port no.1 in the TER (Media).
+Index 2 – related to GBE port no.2 in the TER (Media).
+Index 3 – related to port 1A in PEM #1 (Control).
+ Index 4 – related to port 1B in PEM #2 (Control).
+Index 5 – related to port 2A in PEM #1 (OAM).
+Index 6 – related to port 2B in PEM #2 (OAM).
+On MSBG only:
+1-12 LAN interfaces.
+AC INI-Param: N/A"
+ ::= {acSysEthernetStatusEntry 1}
+
+
+
+ acSysEthernetStatusPortDuplexMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ halfDuplex(0)
+,
+ fullDuplex(1)
+,
+ forceModeValue(2)
+,
+ notAvailable(3)
+
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "full-duplex or half-duplex connection.
+AC INI-Param: N/A"
+ ::= {acSysEthernetStatusEntry 2}
+
+
+
+ acSysEthernetStatusPortSpeed OBJECT-TYPE
+ SYNTAX INTEGER {
+ forceModeValue(2)
+,
+ notAvailable(3)
+,
+ ac10Mbps(10)
+,
+ ac100Mbps(100)
+,
+ ac1000Mbps(1000)
+,
+ ac10Gbps(10000)
+
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "port speed.
+AC INI-Param: N/A"
+ ::= {acSysEthernetStatusEntry 3}
+
+
+
+ acSysEthernetStatusActivePortNumber OBJECT-TYPE
+ SYNTAX INTEGER {
+ notActive(0)
+,
+ active(1)
+
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Status of ethernet port - active or not active.
+AC INI-Param: N/A"
+ ::= {acSysEthernetStatusEntry 4}
+
+
+
+ acSysEthernetStatusPortState OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0)
+,
+ blocking(1)
+,
+ learning(2)
+,
+ forwarding(3)
+,
+ notApplicable(10)
+
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Port State.
+AC INI-Param: N/A"
+ ::= {acSysEthernetStatusEntry 5}
+
+
+
+ acSysEthernetStatusPowerOverEthernet OBJECT-TYPE
+ SYNTAX INTEGER {
+ notApplicable(0)
+,
+ active(1)
+,
+ notActive(2)
+,
+ poeAlarm(3)
+
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Power over Ethernet interface status.
+AC INI-Param: N/A"
+ ::= {acSysEthernetStatusEntry 6}
+
+
+
+ acSysEthernetStatusAllocatedPower OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..20))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Power consumed by the port.
+AC INI-Param: N/A"
+ ::= {acSysEthernetStatusEntry 7}
+
+
+
+ acSysEthernetStatusGroup OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..20))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The group which the port is a member of.
+AC INI-Param: N/A"
+ ::= {acSysEthernetStatusEntry 8}
+
+
+
+ acSysEthernetStatusPowerOverEthernetDetails OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..100))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Power over Ethernet interface status details.
+AC INI-Param: N/A"
+ ::= {acSysEthernetStatusEntry 9}
+
+
+
+ -- ****************************************
+ -- acSysWanStatus table declaration
+ -- ****************************************
+ acSysWanStatusTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AcSysWanStatusEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Ethernet relevant information"
+ ::= {acSysEthernet 22}
+
+
+
+ -- ****************************************
+ -- acSysWanStatus table entry
+ -- ****************************************
+ acSysWanStatusEntry OBJECT-TYPE
+ SYNTAX AcSysWanStatusEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ ""
+ INDEX {acSysWanStatusIndex}
+ ::= {acSysWanStatusTable 1}
+
+
+
+ -- ****************************************
+ -- acSysWanStatus TABLE
+ -- ****************************************
+ AcSysWanStatusEntry ::= SEQUENCE {
+ acSysWanStatusIndex Unsigned32,
+ acSysWanStatusPortType INTEGER,
+ acSysWanStatusPortDuplexMode INTEGER,
+ acSysWanStatusPortSpeed INTEGER,
+ acSysWanStatusActivePortNumber INTEGER,
+ acSysWanStatusPortState INTEGER,
+ acSysWanStatusPowerOverEthernet INTEGER
+ }
+
+
+
+ acSysWanStatusIndex OBJECT-TYPE
+ SYNTAX Unsigned32 (1..4)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The row's index.
+On MSBG Only.
+AC INI-Param: N/A"
+ ::= {acSysWanStatusEntry 1}
+
+
+
+ acSysWanStatusPortType OBJECT-TYPE
+ SYNTAX INTEGER {
+ ethernet(0)
+,
+ t1(1)
+,
+ sHDSL(2)
+,
+ adslVdsl(3)
+,
+ invalidPhyType(4)
+
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+AC INI-Param: N/A"
+ ::= {acSysWanStatusEntry 2}
+
+
+
+ acSysWanStatusPortDuplexMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ halfDuplex(0)
+,
+ fullDuplex(1)
+,
+ forceModeValue(2)
+,
+ notAvailable(3)
+
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "full-duplex or half-duplex connection.
+AC INI-Param: N/A"
+ ::= {acSysWanStatusEntry 3}
+
+
+
+ acSysWanStatusPortSpeed OBJECT-TYPE
+ SYNTAX INTEGER {
+ forceModeValue(2)
+,
+ notAvailable(3)
+,
+ ac10Mbps(10)
+,
+ ac100Mbps(100)
+,
+ ac1000Mbps(1000)
+
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "port speed.
+AC INI-Param: N/A"
+ ::= {acSysWanStatusEntry 4}
+
+
+
+ acSysWanStatusActivePortNumber OBJECT-TYPE
+ SYNTAX INTEGER {
+ notActive(0)
+,
+ active(1)
+
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Status of ethernet port - active or not active.
+AC INI-Param: N/A"
+ ::= {acSysWanStatusEntry 5}
+
+
+
+ acSysWanStatusPortState OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0)
+,
+ blocking(1)
+,
+ learning(2)
+,
+ forwarding(3)
+,
+ notApplicable(10)
+
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Port State.
+AC INI-Param: N/A"
+ ::= {acSysWanStatusEntry 6}
+
+
+
+ acSysWanStatusPowerOverEthernet OBJECT-TYPE
+ SYNTAX INTEGER {
+ notApplicable(0)
+,
+ active(1)
+,
+ notActive(2)
+
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Power over Ethernet interface status.
+AC INI-Param: N/A"
+ ::= {acSysWanStatusEntry 7}
+
+
+
+ -- ****************************************
+ -- acSysEthernetRedundantStatus table declaration
+ -- ****************************************
+ acSysEthernetRedundantStatusTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AcSysEthernetRedundantStatusEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Ethernet relevant information for redundant board (relevant for HA system). {@}Relevant only to M4K."
+ ::= {acSysEthernet 23}
+
+
+
+ -- ****************************************
+ -- acSysEthernetRedundantStatus table entry
+ -- ****************************************
+ acSysEthernetRedundantStatusEntry OBJECT-TYPE
+ SYNTAX AcSysEthernetRedundantStatusEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ ""
+ INDEX {acSysEthernetRedundantStatusIndex}
+ ::= {acSysEthernetRedundantStatusTable 1}
+
+
+
+ -- ****************************************
+ -- acSysEthernetRedundantStatus TABLE
+ -- ****************************************
+ AcSysEthernetRedundantStatusEntry ::= SEQUENCE {
+ acSysEthernetRedundantStatusIndex Unsigned32,
+ acSysEthernetRedundantStatusPortDuplexMode INTEGER,
+ acSysEthernetRedundantStatusPortSpeed INTEGER,
+ acSysEthernetRedundantStatusActivePortNumber INTEGER,
+ acSysEthernetRedundantStatusPortState INTEGER,
+ acSysEthernetRedundantStatusPowerOverEthernet INTEGER,
+ acSysEthernetRedundantStatusAllocatedPower SnmpAdminString,
+ acSysEthernetRedundantStatusGroup SnmpAdminString,
+ acSysEthernetRedundantStatusPowerOverEthernetDetails
+ SnmpAdminString
+ }
+
+
+
+ acSysEthernetRedundantStatusIndex OBJECT-TYPE
+ SYNTAX Unsigned32 (1..12)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The row's index.
+On MSBG only:
+1-12 LAN interfaces.
+AC INI-Param: N/A"
+ ::= {acSysEthernetRedundantStatusEntry 1}
+
+
+
+ acSysEthernetRedundantStatusPortDuplexMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ halfDuplex(0)
+,
+ fullDuplex(1)
+,
+ forceModeValue(2)
+,
+ notAvailable(3)
+
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "full-duplex or half-duplex connection.
+AC INI-Param: N/A"
+ ::= {acSysEthernetRedundantStatusEntry 2}
+
+
+
+ acSysEthernetRedundantStatusPortSpeed OBJECT-TYPE
+ SYNTAX INTEGER {
+ forceModeValue(2)
+,
+ notAvailable(3)
+,
+ ac10Mbps(10)
+,
+ ac100Mbps(100)
+,
+ ac1000Mbps(1000)
+
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "port speed.
+AC INI-Param: N/A"
+ ::= {acSysEthernetRedundantStatusEntry 3}
+
+
+
+ acSysEthernetRedundantStatusActivePortNumber OBJECT-TYPE
+ SYNTAX INTEGER {
+ notActive(0)
+,
+ active(1)
+
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Status of ethernet port - active or not active.
+AC INI-Param: N/A"
+ ::= {acSysEthernetRedundantStatusEntry 4}
+
+
+
+ acSysEthernetRedundantStatusPortState OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0)
+,
+ blocking(1)
+,
+ learning(2)
+,
+ forwarding(3)
+,
+ notApplicable(10)
+
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Port State.
+AC INI-Param: N/A"
+ ::= {acSysEthernetRedundantStatusEntry 5}
+
+
+
+ acSysEthernetRedundantStatusPowerOverEthernet OBJECT-TYPE
+ SYNTAX INTEGER {
+ notApplicable(0)
+,
+ active(1)
+,
+ notActive(2)
+,
+ poeAlarm(3)
+
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Power over Ethernet interface status.
+AC INI-Param: N/A"
+ ::= {acSysEthernetRedundantStatusEntry 6}
+
+
+
+ acSysEthernetRedundantStatusAllocatedPower OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..20))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Power consumed by the port.
+AC INI-Param: N/A"
+ ::= {acSysEthernetRedundantStatusEntry 7}
+
+
+
+ acSysEthernetRedundantStatusGroup OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..20))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The group which the port is a member of.
+AC INI-Param: N/A"
+ ::= {acSysEthernetRedundantStatusEntry 8}
+
+
+
+ acSysEthernetRedundantStatusPowerOverEthernetDetails OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..100))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Power over Ethernet interface status details.
+AC INI-Param: N/A"
+ ::= {acSysEthernetRedundantStatusEntry 9}
+
+
+
+ acSysNAT OBJECT IDENTIFIER ::= {acSysNetwork 2}
+
+
+ acSysNATType OBJECT-TYPE
+ SYNTAX INTEGER {
+ stunDisabled(-1)
+,
+ none(0)
+,
+ fullCone(1)
+,
+ restricted(2)
+,
+ portRestricted(3)
+,
+ symmetric(4)
+,
+ symmetricFireWall(5)
+,
+ blocked(6)
+,
+ unknown(7)
+,
+ natIdentificationInProgress(10)
+
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Identified NAT type.
+-1 - STUN client is disabled
+0 - None
+1 - FullCone
+2 - Restricted
+3 - PortRestricted
+4 - Symmetric
+5 - SymmetricFireWall
+6 - Blocked
+7 - Unknown
+10 - NAT identification in progress.
+AC INI-Param: N/A"
+ ::= {acSysNAT 1}
+
+
+
+ acSysWebStat OBJECT IDENTIFIER ::= {acSysNetwork 3}
+
+
+ acSysWebStatPasswordControlViaSNMP OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0)
+,
+ enabled(1)
+
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "If set to 1 it will allow changing the web interface username
+and password via SNMP.
+AC INI-Param: WEBPasswordControlViaSNMP "
+ ::= {acSysWebStat 1}
+
+
+
+ acSysIPStatus OBJECT IDENTIFIER ::= {acSysNetwork 4}
+
+
+ -- ****************************************
+ -- acSysInterfaceStatus table declaration
+ -- ****************************************
+ acSysInterfaceStatusTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AcSysInterfaceStatusEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ ""
+ ::= {acSysIPStatus 21}
+
+
+
+ -- ****************************************
+ -- acSysInterfaceStatus table entry
+ -- ****************************************
+ acSysInterfaceStatusEntry OBJECT-TYPE
+ SYNTAX AcSysInterfaceStatusEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ ""
+ INDEX {acSysInterfaceStatusEntryIndex,acSysInterfaceStatusTypeIndex}
+ ::= {acSysInterfaceStatusTable 1}
+
+
+
+ -- ****************************************
+ -- acSysInterfaceStatus TABLE
+ -- ****************************************
+ AcSysInterfaceStatusEntry ::= SEQUENCE {
+ acSysInterfaceStatusEntryIndex Unsigned32,
+ acSysInterfaceStatusTypeIndex Unsigned32,
+ acSysInterfaceStatusApplicationTypes INTEGER,
+ acSysInterfaceStatusMode INTEGER,
+ acSysInterfaceStatusIPAddress SnmpAdminString,
+ acSysInterfaceStatusPrefixLength Unsigned32,
+ acSysInterfaceStatusGateway SnmpAdminString,
+ acSysInterfaceStatusVlanID Unsigned32,
+ acSysInterfaceStatusName SnmpAdminString
+ }
+
+
+
+ acSysInterfaceStatusEntryIndex OBJECT-TYPE
+ SYNTAX Unsigned32 (0..31)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Related Interface index in the interface configuration table
+(in case the table is empty - meaning there is only single
+IP the index will appear with 0).
+AC INI-Param: N/A"
+ ::= {acSysInterfaceStatusEntry 1}
+
+
+
+ acSysInterfaceStatusTypeIndex OBJECT-TYPE
+ SYNTAX Unsigned32 (1..2)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "
+1 - IP Address.
+2 - IPv6 Link-Local Address.
+AC INI-Param: N/A"
+ ::= {acSysInterfaceStatusEntry 2}
+
+
+
+ acSysInterfaceStatusApplicationTypes OBJECT-TYPE
+ SYNTAX INTEGER {
+ oam(0)
+,
+ media(1)
+,
+ control(2)
+,
+ oamAndMedia(3)
+,
+ oamAndControl(4)
+,
+ mediaAndControl(5)
+,
+ oamAndMediaAndControl(6)
+,
+ data(11)
+,
+ maintenance(99)
+
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The type assigned to the interface.
+AC INI-Param: N/A"
+ ::= {acSysInterfaceStatusEntry 3}
+
+
+
+ acSysInterfaceStatusMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ iPv6PrefixManual(3)
+,
+ iPv6Manual(4)
+,
+ iPv4Manual(10)
+
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Interface configuration mode.
+AC INI-Param: N/A"
+ ::= {acSysInterfaceStatusEntry 4}
+
+
+
+ acSysInterfaceStatusIPAddress OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..45))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "IP Address (can be either IPv4 or IPv6) for this interface.
+AC INI-Param: N/A"
+ ::= {acSysInterfaceStatusEntry 5}
+
+
+
+ acSysInterfaceStatusPrefixLength OBJECT-TYPE
+ SYNTAX Unsigned32 (0..128)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of ‘1’ bits in this interface’s netmask.
+AC INI-Param: N/A"
+ ::= {acSysInterfaceStatusEntry 6}
+
+
+
+ acSysInterfaceStatusGateway OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..45))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Default Gateway.
+AC INI-Param: N/A"
+ ::= {acSysInterfaceStatusEntry 7}
+
+
+
+ acSysInterfaceStatusVlanID OBJECT-TYPE
+ SYNTAX Unsigned32 (0..4094)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "VLAN ID of this interface.
+AC INI-Param: N/A"
+ ::= {acSysInterfaceStatusEntry 8}
+
+
+
+ acSysInterfaceStatusName OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..15))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "16 character string of this interface’s name.
+AC INI-Param: N/A"
+ ::= {acSysInterfaceStatusEntry 9}
+
+
+
+ -- ****************************************
+ -- acSysDataInterfaceStatus table declaration
+ -- ****************************************
+ acSysDataInterfaceStatusTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AcSysDataInterfaceStatusEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ ""
+ ::= {acSysIPStatus 22}
+
+
+
+ -- ****************************************
+ -- acSysDataInterfaceStatus table entry
+ -- ****************************************
+ acSysDataInterfaceStatusEntry OBJECT-TYPE
+ SYNTAX AcSysDataInterfaceStatusEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ ""
+ INDEX {acSysDataInterfaceStatusIndex}
+ ::= {acSysDataInterfaceStatusTable 1}
+
+
+
+ -- ****************************************
+ -- acSysDataInterfaceStatus TABLE
+ -- ****************************************
+ AcSysDataInterfaceStatusEntry ::= SEQUENCE {
+ acSysDataInterfaceStatusIndex Unsigned32,
+ acSysDataInterfaceStatusName SnmpAdminString,
+ acSysDataInterfaceStatusIPAddress SnmpAdminString,
+ acSysDataInterfaceStatusNetmask SnmpAdminString,
+ acSysDataInterfaceStatusInfo SnmpAdminString,
+ acSysDataInterfaceStatusDescription SnmpAdminString,
+ acSysDataInterfaceStatusOperationalState INTEGER,
+ acSysDataInterfaceStatusStateTime SnmpAdminString,
+ acSysDataInterfaceStatusUptime SnmpAdminString,
+ acSysDataInterfaceStatusMtuMode SnmpAdminString,
+ acSysDataInterfaceStatusDnsStatus SnmpAdminString,
+ acSysDataInterfaceStatusRxPackets Counter32,
+ acSysDataInterfaceStatusRxBytes Counter32,
+ acSysDataInterfaceStatusRxDropped Counter32,
+ acSysDataInterfaceStatusRxErrors Counter32,
+ acSysDataInterfaceStatusTxPackets Counter32,
+ acSysDataInterfaceStatusTxBytes Counter32,
+ acSysDataInterfaceStatusTxDropped Counter32,
+ acSysDataInterfaceStatusTxErrors Counter32,
+ acSysDataInterfaceStatusMinutes Unsigned32,
+ acSysDataInterfaceStatusMinuteInputRate SnmpAdminString,
+ acSysDataInterfaceStatusMinuteOutputRate SnmpAdminString,
+ acSysDataInterfaceStatusSeconds Unsigned32,
+ acSysDataInterfaceStatusSecondInputRate SnmpAdminString,
+ acSysDataInterfaceStatusSecondOutputRate SnmpAdminString
+ }
+
+
+
+ acSysDataInterfaceStatusIndex OBJECT-TYPE
+ SYNTAX Unsigned32 (0..69)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "
+AC INI-Param: N/A"
+ ::= {acSysDataInterfaceStatusEntry 1}
+
+
+
+ acSysDataInterfaceStatusName OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..70))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Interface name.
+AC INI-Param: N/A"
+ ::= {acSysDataInterfaceStatusEntry 2}
+
+
+
+ acSysDataInterfaceStatusIPAddress OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..45))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "IPv4 Address for this interface.
+AC INI-Param: N/A"
+ ::= {acSysDataInterfaceStatusEntry 3}
+
+
+
+ acSysDataInterfaceStatusNetmask OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..45))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Netmask for this interface.
+AC INI-Param: N/A"
+ ::= {acSysDataInterfaceStatusEntry 4}
+
+
+
+ acSysDataInterfaceStatusInfo OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..30))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Status of interface can be one of the following: Unknown, Disabled,
+Enabled, Connected or Disconnected.
+AC INI-Param: N/A"
+ ::= {acSysDataInterfaceStatusEntry 5}
+
+
+
+ acSysDataInterfaceStatusDescription OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..30))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Description of the interface.
+AC INI-Param: N/A"
+ ::= {acSysDataInterfaceStatusEntry 6}
+
+
+
+ acSysDataInterfaceStatusOperationalState OBJECT-TYPE
+ SYNTAX INTEGER {
+ down(0)
+,
+ up(1)
+
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Protocol is UP or Down.
+AC INI-Param: N/A"
+ ::= {acSysDataInterfaceStatusEntry 7}
+
+
+
+ acSysDataInterfaceStatusStateTime OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..9))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Time elapsed since the interface entered its current state (HH:MM:SS).
+AC INI-Param: N/A"
+ ::= {acSysDataInterfaceStatusEntry 8}
+
+
+
+ acSysDataInterfaceStatusUptime OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..9))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Time since the interface was created (HH:MM:SS).
+AC INI-Param: N/A"
+ ::= {acSysDataInterfaceStatusEntry 9}
+
+
+
+ acSysDataInterfaceStatusMtuMode OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..20))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "the Maximum Transmission Unit (MTU) on the specified interface.
+Can be: automatically, DHCP or value (in bytes).
+AC INI-Param: N/A"
+ ::= {acSysDataInterfaceStatusEntry 10}
+
+
+
+ acSysDataInterfaceStatusDnsStatus OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..20))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "DNS servers information for this interface.
+AC INI-Param: N/A"
+ ::= {acSysDataInterfaceStatusEntry 11}
+
+
+
+ acSysDataInterfaceStatusRxPackets OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Total packets received.
+AC INI-Param: N/A"
+ ::= {acSysDataInterfaceStatusEntry 12}
+
+
+
+ acSysDataInterfaceStatusRxBytes OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Total bytes received.
+AC INI-Param: N/A"
+ ::= {acSysDataInterfaceStatusEntry 13}
+
+
+
+ acSysDataInterfaceStatusRxDropped OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "No space in receive buffers available.
+AC INI-Param: N/A"
+ ::= {acSysDataInterfaceStatusEntry 14}
+
+
+
+ acSysDataInterfaceStatusRxErrors OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Bad packets received.
+AC INI-Param: N/A"
+ ::= {acSysDataInterfaceStatusEntry 15}
+
+
+
+ acSysDataInterfaceStatusTxPackets OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Total packets transmitted.
+AC INI-Param: N/A"
+ ::= {acSysDataInterfaceStatusEntry 16}
+
+
+
+ acSysDataInterfaceStatusTxBytes OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Total bytes transmitted.
+AC INI-Param: N/A"
+ ::= {acSysDataInterfaceStatusEntry 17}
+
+
+
+ acSysDataInterfaceStatusTxDropped OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "No space in transmit buffers available.
+AC INI-Param: N/A"
+ ::= {acSysDataInterfaceStatusEntry 18}
+
+
+
+ acSysDataInterfaceStatusTxErrors OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Packet transmit problems.
+AC INI-Param: N/A"
+ ::= {acSysDataInterfaceStatusEntry 19}
+
+
+
+ acSysDataInterfaceStatusMinutes OBJECT-TYPE
+ SYNTAX Unsigned32 (0..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This value determines time interval in minutes, on which the
+rate sampling is done. The value is relevant to the columns
+MinuteInputRate and MinuteOutputRate.
+AC INI-Param: N/A"
+ ::= {acSysDataInterfaceStatusEntry 20}
+
+
+
+ acSysDataInterfaceStatusMinuteInputRate OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..100))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The average received bits rate (bps) and packets rate (pps)
+during the last ‘acSysDataInterfaceStatusMinutes’ minutes.
+AC INI-Param: N/A"
+ ::= {acSysDataInterfaceStatusEntry 21}
+
+
+
+ acSysDataInterfaceStatusMinuteOutputRate OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..100))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The average transmitted bits rate (bps) and packets rate (pps)
+during the last ‘acSysDataInterfaceStatusMinutes’ minutes.
+AC INI-Param: N/A"
+ ::= {acSysDataInterfaceStatusEntry 22}
+
+
+
+ acSysDataInterfaceStatusSeconds OBJECT-TYPE
+ SYNTAX Unsigned32 (0..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This value determines time interval in seconds on which the
+rate sampling is done. The value is relevant to the columns
+SecondInputRate and SecondOutputRate.
+AC INI-Param: N/A"
+ ::= {acSysDataInterfaceStatusEntry 23}
+
+
+
+ acSysDataInterfaceStatusSecondInputRate OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..100))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The average received bits rate (bps) and packets rate (pps)
+during the last ‘acSysDataInterfaceStatusSeconds’ seconds.
+AC INI-Param: N/A"
+ ::= {acSysDataInterfaceStatusEntry 24}
+
+
+
+ acSysDataInterfaceStatusSecondOutputRate OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..100))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The average transmitted bits rate (bps) and packets rate (pps)
+during the last ‘acSysDataInterfaceStatusSeconds’ seconds.
+AC INI-Param: N/A"
+ ::= {acSysDataInterfaceStatusEntry 25}
+
+
+
+ acSysTime OBJECT IDENTIFIER ::= {acSystemStatus 7}
+
+
+ acSysTimeUp OBJECT-TYPE
+ SYNTAX Unsigned32 (0..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Time (in Seconds) that the board is alive.
+AC INI-Param: N/A"
+ ::= {acSysTime 1}
+
+
+
+ acSysVoicePrompt OBJECT IDENTIFIER ::= {acSystemStatus 8}
+
+
+ acSysVoicePromptTotalMemorySize OBJECT-TYPE
+ SYNTAX Unsigned32 (0..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Get the total voice prompt memory size.
+AC INI-Param: N/A"
+ ::= {acSysVoicePrompt 1}
+
+
+
+ acSysVoicePromptMaxFreeMemorySize OBJECT-TYPE
+ SYNTAX Unsigned32 (0..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Get the maximu voice prompt memory free size.
+AC INI-Param: N/A"
+ ::= {acSysVoicePrompt 2}
+
+
+
+ acSysRepositoryAMS OBJECT IDENTIFIER ::= {acSystemStatus 9}
+
+
+ acSysRepositoryAMSIsReadyForUpdate OBJECT-TYPE
+ SYNTAX INTEGER {
+ false(0)
+,
+ true(1)
+
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Verify if the old repository is free or there are signals still
+using it.
+AC INI-Param: N/A"
+ ::= {acSysRepositoryAMS 1}
+
+
+
+ acSysHAStatus OBJECT IDENTIFIER ::= {acSystemStatus 10}
+
+
+ acSysHAStatusReady OBJECT-TYPE
+ SYNTAX INTEGER {
+ notApplicable(1)
+,
+ yes(2)
+,
+ no(3)
+
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Defines whether the M3K system supports HA or not.
+AC INI-Param: N/A"
+ ::= {acSysHAStatus 1}
+
+
+
+ acSysHAStatusNetworkWatchdogStatus OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..400))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+AC INI-Param: N/A"
+ ::= {acSysHAStatus 2}
+
+
+
+ acSysLDAPStatus OBJECT IDENTIFIER ::= {acSystemStatus 11}
+
+
+ acSysLDAPStatusServerMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ notApplicable(0)
+,
+ connectionBroken(1)
+,
+ connecting(2)
+,
+ connected(3)
+
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "LDAP server status.
+AC INI-Param: N/A"
+ ::= {acSysLDAPStatus 1}
+
+
+
+ acSysNqmStatus OBJECT IDENTIFIER ::= {acSystemStatus 12}
+
+
+ -- ****************************************
+ -- acSysNqmHistory table declaration
+ -- ****************************************
+ acSysNqmHistoryTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AcSysNqmHistoryEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ ""
+ ::= {acSysNqmStatus 1}
+
+
+
+ -- ****************************************
+ -- acSysNqmHistory table entry
+ -- ****************************************
+ acSysNqmHistoryEntry OBJECT-TYPE
+ SYNTAX AcSysNqmHistoryEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ ""
+ INDEX {acSysNqmHistorySenderIndex,acSysNqmHistoryIndex}
+ ::= {acSysNqmHistoryTable 1}
+
+
+
+ -- ****************************************
+ -- acSysNqmHistory TABLE
+ -- ****************************************
+ AcSysNqmHistoryEntry ::= SEQUENCE {
+ acSysNqmHistorySenderIndex Unsigned32,
+ acSysNqmHistoryIndex Unsigned32,
+ acSysNqmHistoryProbeTime SnmpAdminString,
+ acSysNqmHistoryIsValid SnmpAdminString,
+ acSysNqmHistoryRoundTripTime Unsigned32,
+ acSysNqmHistoryPacketLossTx Unsigned32,
+ acSysNqmHistoryPacketLossRx Unsigned32,
+ acSysNqmHistoryTotalPacketLoss Unsigned32,
+ acSysNqmHistoryJitterTx Unsigned32,
+ acSysNqmHistoryJitterRx Unsigned32,
+ acSysNqmHistoryTotalJitter Unsigned32,
+ acSysNqmHistoryCqMos Unsigned32,
+ acSysNqmHistoryLqMos Unsigned32
+ }
+
+
+
+ acSysNqmHistorySenderIndex OBJECT-TYPE
+ SYNTAX Unsigned32 (0..9)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Index of Sender from acSysNqmSenderTable.
+AC INI-Param: N/A"
+ ::= {acSysNqmHistoryEntry 1}
+
+
+
+ acSysNqmHistoryIndex OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Internal index.
+AC INI-Param: N/A"
+ ::= {acSysNqmHistoryEntry 2}
+
+
+
+ acSysNqmHistoryProbeTime OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..32))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "NULL terminated.
+AC INI-Param: N/A"
+ ::= {acSysNqmHistoryEntry 3}
+
+
+
+ acSysNqmHistoryIsValid OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..16))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Null terminated Yes/No or textual reason.
+AC INI-Param: N/A"
+ ::= {acSysNqmHistoryEntry 4}
+
+
+
+ acSysNqmHistoryRoundTripTime OBJECT-TYPE
+ SYNTAX Unsigned32 (0..99999)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "round trip time [msec].
+AC INI-Param: N/A"
+ ::= {acSysNqmHistoryEntry 5}
+
+
+
+ acSysNqmHistoryPacketLossTx OBJECT-TYPE
+ SYNTAX Unsigned32 (0..999999)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "outging packet loss.
+AC INI-Param: N/A"
+ ::= {acSysNqmHistoryEntry 6}
+
+
+
+ acSysNqmHistoryPacketLossRx OBJECT-TYPE
+ SYNTAX Unsigned32 (0..999999)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "incoming packet loss.
+AC INI-Param: N/A"
+ ::= {acSysNqmHistoryEntry 7}
+
+
+
+ acSysNqmHistoryTotalPacketLoss OBJECT-TYPE
+ SYNTAX Unsigned32 (0..9999999)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "sum of Rx and Tx packet loss.
+AC INI-Param: N/A"
+ ::= {acSysNqmHistoryEntry 8}
+
+
+
+ acSysNqmHistoryJitterTx OBJECT-TYPE
+ SYNTAX Unsigned32 (0..999999)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "outgoing jitter.
+AC INI-Param: N/A"
+ ::= {acSysNqmHistoryEntry 9}
+
+
+
+ acSysNqmHistoryJitterRx OBJECT-TYPE
+ SYNTAX Unsigned32 (0..999999)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "incoming jitter.
+AC INI-Param: N/A"
+ ::= {acSysNqmHistoryEntry 10}
+
+
+
+ acSysNqmHistoryTotalJitter OBJECT-TYPE
+ SYNTAX Unsigned32 (0..9999999)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "round trip jitter.
+AC INI-Param: N/A"
+ ::= {acSysNqmHistoryEntry 11}
+
+
+
+ acSysNqmHistoryCqMos OBJECT-TYPE
+ SYNTAX Unsigned32 (0..99999)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Conversation quality MOS.
+AC INI-Param: N/A"
+ ::= {acSysNqmHistoryEntry 12}
+
+
+
+ acSysNqmHistoryLqMos OBJECT-TYPE
+ SYNTAX Unsigned32 (0..99999)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Listener quality MOS.
+AC INI-Param: N/A"
+ ::= {acSysNqmHistoryEntry 13}
+
+
+
+ acSysDataStatus OBJECT IDENTIFIER ::= {acSystemStatus 13}
+
+
+ acSysDataStatusFirewallTCPConnections OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of TCP firewall connections.
+AC INI-Param: N/A"
+ ::= {acSysDataStatus 1}
+
+
+
+ acSysDataStatusFirewallUDPConnections OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of UDP firewall connections.
+AC INI-Param: N/A"
+ ::= {acSysDataStatus 2}
+
+
+
+ acSysDataStatusFirewallICMPConnections OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of ICMP firewall connections.
+AC INI-Param: N/A"
+ ::= {acSysDataStatus 3}
+
+
+
+ acSystemAction OBJECT IDENTIFIER ::= {acSystem 3}
+
+
+ acSysAction OBJECT IDENTIFIER ::= {acSystemAction 1}
+
+
+ acSysActionSet OBJECT IDENTIFIER ::= {acSysAction 1}
+
+
+ acSysActionSetReset OBJECT-TYPE
+ SYNTAX Unsigned32 (0..1)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "remote Reset. To remote reset the board, set the value of this
+object to 1.
+Note: Before Reset, The current boardConfiguration parameters
+will be burned to the board.
+Access: Instant.
+AC INI-Param: N/A"
+ ::= {acSysActionSet 1}
+
+
+
+ acSysActionSetResetControl OBJECT-TYPE
+ SYNTAX INTEGER {
+ resetFromFlashAfterBurn(1)
+,
+ resetFromFlashNoBurn(2)
+,
+ resetFromBootP(3)
+
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Determines the remote reset action.
+1 - burn staged load image, if any, and config to flash, perform
+a reset, and load from flash
+2 - perform a reset, and load from flash (staged load image,
+if any, and config is not burned to flash)
+3 - perform a reset, and load from bootp/tftp (staged load
+image, if any, and config burn is not needed)
+* - an error is returned for any other value
+Note: The staged load image is an image of a cmp file that
+was previously loaded to a area in RAM via an HTTP upload.
+Access: Instant.
+AC INI-Param: RemoteResetControl"
+ ::= {acSysActionSet 2}
+
+
+
+ acSysActionSetDefaults OBJECT-TYPE
+ SYNTAX Unsigned32 (0..1)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "To set the board to default values, set the value of this object
+to 1.
+Access: Instant.
+AC INI-Param: N/A"
+ ::= {acSysActionSet 3}
+
+
+
+ acSysActionSetSaveConfig OBJECT-TYPE
+ SYNTAX Unsigned32 (0..1)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "To save all current configuration in the board onto the flash,
+set the value of this object to 1.
+NOTE: Do NOT save the configuration while voice is running
+- this will cause a delay.
+Access: Instant.
+AC INI-Param: N/A"
+ ::= {acSysActionSet 4}
+
+
+
+ acSysActionSetAutoUpdate OBJECT-TYPE
+ SYNTAX Unsigned32 (0..1)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "To update the system configuration according to the provisioned
+IniFileUrl, set the value of this object to 1.
+Access: Instant.
+AC INI-Param: N/A"
+ ::= {acSysActionSet 5}
+
+
+
+ acSysActionSetGetTimeFromNTPServer OBJECT-TYPE
+ SYNTAX Unsigned32 (0..1)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Initiates an immediate NTP time fetch.
+Access: Instant.
+AC INI-Param: N/A"
+ ::= {acSysActionSet 6}
+
+
+
+ acSysActionSetSwUpgrade OBJECT-TYPE
+ SYNTAX INTEGER {
+ hitLessUpGrade(1)
+,
+ systemResetUpGrade(2)
+
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Defines the type of SW upgrade in M3K HA system:
+Hitless upgrade only or system reset upgrade if hitless is
+not supported.
+This parameter can be set by ini file and snmp.
+Access: Instant.
+AC INI-Param: M3KHASwUpgradeMode"
+ ::= {acSysActionSet 7}
+
+
+
+ acSysActionSetOnLineChangesApply OBJECT-TYPE
+ SYNTAX INTEGER {
+ defaultValue(0)
+,
+ applyChanges(1)
+
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Applies the board on line changed params.
+Access: Instant.
+AC INI-Param: N/A"
+ ::= {acSysActionSet 8}
+
+
+
+ acSysActionSetIPSecTLSUpgrade OBJECT-TYPE
+ SYNTAX INTEGER {
+ defaultValue(0)
+,
+ upDateChanges(1)
+
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "To update the IPSec TLS configuration according to the provisioned
+TLS fils URL set the value of this object to 1.
+Access: Instant.
+AC INI-Param: N/A"
+ ::= {acSysActionSet 9}
+
+
+
+ acSysActionSetGWAppTLSUpgrade OBJECT-TYPE
+ SYNTAX INTEGER {
+ defaultValue(0)
+,
+ upDateChanges(1)
+
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "To update the GWApp TLS configuration according to the provisioned
+TLS fils URL set the value of this object to 1.
+Access: Instant.
+AC INI-Param: N/A"
+ ::= {acSysActionSet 10}
+
+
+
+ acSysActionSetConvertNetworkIFsConfiguration OBJECT-TYPE
+ SYNTAX INTEGER {
+ defaultValue(0)
+,
+ convertAction(1)
+
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "SET to 1 will convert network configuration to advance multiple
+network Interfaces mode.
+Access: Instant.
+AC INI-Param: N/A"
+ ::= {acSysActionSet 11}
+
+
+
+ acSysActionSetActionId OBJECT-TYPE
+ SYNTAX Unsigned32 (0..2147483647)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This field is for management use and is aimed to distinguish
+different managers managing a single device.
+Access: Instant.
+AC INI-Param: N/A"
+ ::= {acSysActionSet 12}
+
+
+
+ acSysActionSetAutoUpdateActionResult OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..200))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates the autoupdates operation status in the form of a
+string: 'acSysActionId ; <status> ; <reson>'.
+The status field can be: 'success'\'failure'\'inProgress'.
+The infromation is valid only when downloading one file at
+a time.
+Note - a second way of following the success of the file downloading
+is to see the files name being updated in the acSysFile
+subtree.
+AC INI-Param: N/A"
+ ::= {acSysActionSet 13}
+
+
+
+ acSysActionSetApplyINImethod OBJECT-TYPE
+ SYNTAX INTEGER {
+ applyAfterReset(0)
+,
+ applyImmediate(1)
+
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "INI parsing method.
+
+0 = Apply After Reset
+1 = Apply Immediate
+
+When downloading a new INI to the gateway this parameter determine
+if a parsing will be done immediately or after a reboot.
+
+Note that the default is immediately parsing.
+Access: Instant.
+AC INI-Param: ApplyINImethod"
+ ::= {acSysActionSet 14}
+
+
+
+ acSysActionAdmin OBJECT IDENTIFIER ::= {acSysAction 2}
+
+
+ acSysActionAdminState OBJECT-TYPE
+ SYNTAX INTEGER {
+ locked(0)
+,
+ shuttingDown(1)
+,
+ unlocked(2)
+
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Determines the gateway's operational state.
+0 - locked: Shutdown the GW In the time frame set by acgwAdminStateLockControl.
+1 - shuttingDown: (read only) Graceful Shutdown is being carried
+out.
+2 - unlocked: GW is in service.
+Access: Online.
+AC INI-Param: N/A"
+ ::= {acSysActionAdmin 1}
+
+
+
+ acSysActionAdminStateLockTimeout OBJECT-TYPE
+ SYNTAX Integer32 (-1..32768)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Defines the time remaining (in seconds) for the shutdown to
+complete.
+ 0 = immediate shutdown
+-1 = waits until all calls drop (infinite)
+>0 = the number of seconds to wait.
+Access: Offline.
+AC INI-Param: N/A"
+ ::= {acSysActionAdmin 2}
+
+
+
+ acSysUpload OBJECT IDENTIFIER ::= {acSysAction 3}
+
+
+ acSysUploadActionType OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(0)
+,
+ upload(1)
+,
+ remove(2)
+,
+ actionDone(10)
+
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Action to be carried out. Setting this field triggers the action.
+File upload supported for iniFile(1), v5PortFile(16) and DataConfigurationFile(17)
+only access is instant.
+File removal supported for all other then iniFile(1), casFile(7),
+v5PortFile(16) and DataConfigurationFile(17), (v5PortFile
+removal is done via acV5PortActionType) access is offline.
+Access: Instant.
+AC INI-Param: N/A"
+ ::= {acSysUpload 1}
+
+
+
+ acSysUploadFileType OBJECT-TYPE
+ SYNTAX INTEGER {
+ iniFile(1)
+,
+ cptFile(2)
+,
+ vpFile(3)
+,
+ prerecordedTonesFile(4)
+,
+ fxsCoeffFile(5)
+,
+ fxoCoeffFile(6)
+,
+ casFile(7)
+,
+ xmlFile(8)
+,
+ externalCoderFile(9)
+,
+ userInfoFile(10)
+,
+ dialPlanFile(11)
+,
+ tlsPKeyFile(12)
+,
+ tlsCertFile(13)
+,
+ tlsRootFile(14)
+,
+ videoFontFile(15)
+,
+ v5PortFile(16)
+,
+ dataConfigurationFile(17)
+,
+ amdSensitivityFile(18)
+
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The file type to be uploaded.
+Note - for file types with more then one instance (like CAS
+files) use the acSysActionFileInstance to specify which instance
+you want to upload.
+Access: Instant.
+AC INI-Param: N/A"
+ ::= {acSysUpload 2}
+
+
+
+ acSysUploadFileNumber OBJECT-TYPE
+ SYNTAX Integer32 (-1..7)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "File number for file types that have more then one file instance,
+such as CAS, VideoFont etc'.
+Access: Instant.
+AC INI-Param: N/A"
+ ::= {acSysUpload 3}
+
+
+
+ acSysUploadFileURI OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..254))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "URI indicating file location to be downloaded to.
+Access: Instant.
+AC INI-Param: N/A"
+ ::= {acSysUpload 4}
+
+
+
+ acSysUploadActionID OBJECT-TYPE
+ SYNTAX Unsigned32 (0..2147483647)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This field is for management use and is aimed to distinguish
+different managers managing a single device.
+Access: Instant.
+AC INI-Param: N/A"
+ ::= {acSysUpload 5}
+
+
+
+ acSysUploadActionResult OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..40))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Action result. Includes action status (success, failure or inProgress),
+action ID.
+AC INI-Param: N/A"
+ ::= {acSysUpload 6}
+
+
+
+ acSystemChassis OBJECT IDENTIFIER ::= {acSystem 4}
+
+
+ acSystemChassisDryContactsOutStatus OBJECT-TYPE
+ SYNTAX BITS {
+ noAlarm(0)
+,
+ criticalAlarm(1)
+,
+ majorAlarm(2)
+,
+ minorAlarm(3)
+
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates current state of the alarm dry contacts – out signals
+(3 signals). This is a bit-map of possible conditions.
+AC INI-Param: N/A"
+ ::= {acSystemChassis 1}
+
+
+
+ acSystemChassisDryContactsInStatus OBJECT-TYPE
+ SYNTAX BITS {
+ noAlarm(0)
+,
+ alarm1(1)
+
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates current state of the alarm dry contacts - in signals
+(1 signals). The role of each input signal should be according
+to the customer's requirements. This is a bit-map of possible
+conditions.
+AC INI-Param: N/A"
+ ::= {acSystemChassis 2}
+
+
+
+ acSystemChassisLastChanged OBJECT-TYPE
+ SYNTAX Unsigned32 (0..4294967295)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The value of sysUpTime at the time a row is modified in any
+of the acSystemChassis subtree's objects.
+AC INI-Param: N/A"
+ ::= {acSystemChassis 3}
+
+
+
+ -- ****************************************
+ -- acSysModule table declaration
+ -- ****************************************
+ acSysModuleTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AcSysModuleEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ " "
+ ::= {acSystemChassis 21}
+
+
+
+ -- ****************************************
+ -- acSysModule table entry
+ -- ****************************************
+ acSysModuleEntry OBJECT-TYPE
+ SYNTAX AcSysModuleEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ ""
+ INDEX {acSysModuleIndex}
+ ::= {acSysModuleTable 1}
+
+
+
+ -- ****************************************
+ -- acSysModule TABLE
+ -- ****************************************
+ AcSysModuleEntry ::= SEQUENCE {
+ acSysModuleIndex Unsigned32,
+ acSysModuleGeographicalPosition Unsigned32,
+ acSysModuleType INTEGER,
+ acSysModulePresence INTEGER,
+ acSysModuleLicenseKeyList SnmpAdminString,
+ acSysModuleSerialNumber Integer32,
+ acSysModuleSWVersion SnmpAdminString,
+ acSysModuleOperationalState INTEGER,
+ acSysModuleHAStatus INTEGER,
+ acSysModuleLEDs OCTET STRING,
+ acSysModuleTemperature Integer32,
+ acSysModuleActions INTEGER,
+ acSysModuleFRUaction INTEGER,
+ acSysModuleFRUstatus INTEGER,
+ acSysModuleNumOfPorts Unsigned32,
+ acSysModuleFirstPortNum Unsigned32
+ }
+
+
+
+ acSysModuleIndex OBJECT-TYPE
+ SYNTAX Unsigned32 (1..2147483647)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The Module number in the system.
+AC INI-Param: N/A"
+ ::= {acSysModuleEntry 1}
+
+
+
+ acSysModuleGeographicalPosition OBJECT-TYPE
+ SYNTAX Unsigned32 (1..12)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The slot number in the chassis. 1 being the bottom slot and
+so on.
+AC INI-Param: N/A"
+ ::= {acSysModuleEntry 2}
+
+
+
+ acSysModuleType OBJECT-TYPE
+ SYNTAX INTEGER {
+ acUnknown(0)
+,
+ acTrunkPack-08(1)
+,
+ acMediaPack-108(2)
+,
+ acMediaPack-124(3)
+,
+ acTrunkPack-1600(20)
+,
+ acTPM1100(22)
+,
+ acTrunkPack-260-IpMedia(23)
+,
+ acTrunkPack-1610(24)
+,
+ acMediaPack-104(25)
+,
+ acMediaPack-102(26)
+,
+ acTrunkPack-1610-SB(29)
+,
+ acTrunkPack-1610-IpMedia(30)
+,
+ acTrunkPack-MEDIANT2000(31)
+,
+ acTrunkPack-STRETTO2000(32)
+,
+ acTrunkPack-IPMServer2000(33)
+,
+ acTrunkPack-2810(34)
+,
+ acTrunkPack-260-UN-IpMedia (35)
+,
+ acTrunkPack-260-IpMedia-30Ch(36)
+,
+ acTrunkPack-260-IpMedia-60Ch(37)
+,
+ acTrunkPack-260-IpMedia-120Ch(38)
+,
+ acTrunkPack-260RT-IpMedia-30Ch(39)
+,
+ acTrunkPack-260RT-IpMedia-60Ch(40)
+,
+ acTrunkPack-260RT-IpMedia-120Ch(41)
+,
+ acTrunkPack-260(42)
+,
+ acTrunkPack-260-UN (43)
+,
+ acTPM1100-PCM(44)
+,
+ acTrunkPack-6310(45)
+,
+ acTPM6300(46)
+,
+ acMediant1000(47)
+,
+ acIPMedia3000(48)
+,
+ acMediant3000(49)
+,
+ acStretto3000(50)
+,
+ acTrunkPack-6310-IpMedia(51)
+,
+ acTrunkPack-6310-SB(52)
+,
+ acATP-1610(53)
+,
+ acATP-260(54)
+,
+ acATP-260-UN(55)
+,
+ acMediaPack-118(56)
+,
+ acMediaPack114(57)
+,
+ acMediaPack112(58)
+,
+ acTrunkPack-6310-T3(59)
+,
+ acMediant3000-T3(60)
+,
+ acIPmedia3000-T3(61)
+,
+ acTrunkPack-6310-T3-IpMedia(62)
+,
+ acTrunkPack-8410(63)
+,
+ acTrunkPack-8410-IpMedia(64)
+,
+ acMediant-800-MSBG(69)
+,
+ acMediant-500-MSBR(76)
+,
+ acMediant-500-ESBC(77)
+,
+ acMediant-500L-MSBR(84)
+,
+ acMediant-500L-ESBC(85)
+,
+ sA1(250)
+,
+ sA2(251)
+,
+ sA3(252)
+,
+ acMediant1000CPUmodule(253)
+,
+ acMediant1000IFDigitalModule(254)
+,
+ acMediant1000IFAnalogModule(255)
+,
+ acMediant1000IFBRIModule(256)
+,
+ acMediant1000IPMediaModule(257)
+,
+ acMediant600CPUmodule(258)
+,
+ acMediant600IFDigitalModule(259)
+,
+ acMediant600IFAnalogModule(260)
+,
+ acMediant600IFBRIModule(261)
+,
+ acMediant600IPMediaModule(262)
+,
+ acMediant800CPUmodule(265)
+,
+ acMediant800IFDigitalModule(266)
+,
+ acMediant800IFAnalogModule(267)
+,
+ acMediant800IFBRIModule(268)
+,
+ acMediant800IFWANModule(269)
+,
+ acMediant800IFWiFiModule(270)
+,
+ acMediant800IPMediaModule(271)
+,
+ acMediant800EthernetModule(272)
+,
+ acMediant800IFT1WANModule(273)
+,
+ acMediant800IFSHDSLModule(274)
+,
+ acMediant800IFADSLModule(275)
+,
+ acMediant1000IFWANModule(276)
+,
+ acMediant1000IFT1WANModule(277)
+,
+ acMediant1000IFSHDSLModule(278)
+,
+ acMediant1000IFADSLModule(279)
+,
+ acMediant4000CPUmodule(280)
+,
+ acMediant1000EthernetModule(281)
+,
+ acSWESBCModule(282)
+,
+ acMediant500CPUmodule(283)
+,
+ acMediant500IFDigitalModule(284)
+,
+ acMediant500IFAnalogModule(285)
+,
+ acMediant500IFBRIModule(286)
+,
+ acMediant500IFWANModule(287)
+,
+ acMediant500IFWiFiModule(288)
+,
+ acMediant500IPMediaModule(289)
+,
+ acMediant500EthernetModule(290)
+,
+ acMediant500IFT1WANModule(291)
+,
+ acMediant500IFSHDSLModule(292)
+,
+ acMediant500IFADSLModule(293)
+,
+ acMediant500IFGESFPModule(294)
+,
+ acMediant4000MPModule(295)
+,
+ acMediant-850-MSBG(296)
+,
+ acMediant850CPUmodule(297)
+,
+ acMediant850IFDigitalModule(298)
+,
+ acMediant850IFAnalogModule(299)
+,
+ acMediant850IFBRIModule(300)
+,
+ acMediant850IFWANModule(301)
+,
+ acMediant850IFWiFiModule(302)
+,
+ acMediant850IPMediaModule(303)
+,
+ acMediant850EthernetModule(304)
+,
+ acMediant850IFT1WANModule(305)
+,
+ acMediant850IFSHDSLModule(306)
+,
+ acMediant850IFADSLModule(307)
+,
+ acMediant2600CPUmodule(308)
+,
+ acMediant2600MPModule(309)
+
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The module's type.
+AC INI-Param: N/A"
+ ::= {acSysModuleEntry 3}
+
+
+
+ acSysModulePresence OBJECT-TYPE
+ SYNTAX INTEGER {
+ present(1)
+,
+ missing(2)
+
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Is the module present or missing.
+AC INI-Param: N/A"
+ ::= {acSysModuleEntry 4}
+
+
+
+ acSysModuleLicenseKeyList OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..1400))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "List of active features as enabled by the license key. SA modules
+return NULL.
+AC INI-Param: N/A"
+ ::= {acSysModuleEntry 5}
+
+
+
+ acSysModuleSerialNumber OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The module's serial number.
+For 6310 the serial number is the decimal form of the last
+5 characters in the MAC Address.
+ SA modules return 0.
+ When the modules in the table are unavailable for audit (no
+HA) (-1) is returned.
+AC INI-Param: N/A"
+ ::= {acSysModuleEntry 6}
+
+
+
+ acSysModuleSWVersion OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..20))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The version of the SW being run in the module placed .
+ SA Modules return NULL.
+AC INI-Param: N/A"
+ ::= {acSysModuleEntry 7}
+
+
+
+ acSysModuleOperationalState OBJECT-TYPE
+ SYNTAX INTEGER {
+ disable(1)
+,
+ enable(2)
+
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The operational state of the module. Determined internally by
+the system.
+AC INI-Param: N/A"
+ ::= {acSysModuleEntry 8}
+
+
+
+ acSysModuleHAStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ acitveNonHA(1)
+,
+ active(2)
+,
+ redundant(3)
+,
+ standAlone(4)
+,
+ redundantNonHA(5)
+,
+ notApplicable(6)
+
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Modules status with in the system. Designed to define the HA
+state.
+AC INI-Param: N/A"
+ ::= {acSysModuleEntry 9}
+
+
+
+ acSysModuleLEDs OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (0..50))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Bit Field for the LEDs on the front of the module.
+LSB in each nibble (half Byte) is 0 - constant, 1 - blinking.
+3 MSB are the color -
+ 0 - none
+ 1- Green
+ 2 - Red
+ 3 - Yellow
+ 4 - Orange
+ 5 - Blue
+ 7 - Gray (unknown).
+AC INI-Param: N/A"
+ ::= {acSysModuleEntry 10}
+
+
+
+ acSysModuleTemperature OBJECT-TYPE
+ SYNTAX Integer32 (-1..100)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Temperature of the board in degrees Celsius. SA Modules return
+0.
+AC INI-Param: N/A"
+ ::= {acSysModuleEntry 11}
+
+
+
+ acSysModuleActions OBJECT-TYPE
+ SYNTAX INTEGER {
+ reset(1)
+,
+ switchOver(2)
+,
+ actionDone(3)
+
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Actions to be performed by the module.
+Access: Instant.
+AC INI-Param: N/A"
+ ::= {acSysModuleEntry 12}
+
+
+
+ acSysModuleFRUaction OBJECT-TYPE
+ SYNTAX INTEGER {
+ fruActionDone(1)
+,
+ fruOutOfServiceAction(2)
+,
+ fruBackToServiceAction(3)
+,
+ fruNotApplicable(4)
+
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Field Replace Unit actions
+Relevant to IF-Module only.
+Access: Instant.
+AC INI-Param: N/A"
+ ::= {acSysModuleEntry 13}
+
+
+
+ acSysModuleFRUstatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ moduleNotExist(1)
+,
+ moduleExistOk(2)
+,
+ moduleOutOfService(3)
+,
+ moduleBackToServiceStart(4)
+,
+ moduleMismatch(5)
+,
+ moduleFaulty(6)
+,
+ notApplicable(7)
+
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Field Replace Unit module's status.
+AC INI-Param: N/A"
+ ::= {acSysModuleEntry 14}
+
+
+
+ acSysModuleNumOfPorts OBJECT-TYPE
+ SYNTAX Unsigned32 (1..4)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of physical interfaces in a module, analog or digital.
+AC INI-Param: N/A"
+ ::= {acSysModuleEntry 15}
+
+
+
+ acSysModuleFirstPortNum OBJECT-TYPE
+ SYNTAX Unsigned32 (0..19)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The logical number as seen in the general trunk/analog-channel
+table of the first port in the module in question.
+Since analog and digital ports can be operational at once,
+analog and digital ports may have same logical number.
+AC INI-Param: N/A"
+ ::= {acSysModuleEntry 16}
+
+
+
+ -- ****************************************
+ -- acSysFanTray table declaration
+ -- ****************************************
+ acSysFanTrayTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AcSysFanTrayEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ ""
+ ::= {acSystemChassis 22}
+
+
+
+ -- ****************************************
+ -- acSysFanTray table entry
+ -- ****************************************
+ acSysFanTrayEntry OBJECT-TYPE
+ SYNTAX AcSysFanTrayEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ ""
+ INDEX {acSysFanTrayIndex}
+ ::= {acSysFanTrayTable 1}
+
+
+
+ -- ****************************************
+ -- acSysFanTray TABLE
+ -- ****************************************
+ AcSysFanTrayEntry ::= SEQUENCE {
+ acSysFanTrayIndex Unsigned32,
+ acSysFanTrayGeographicalPosition Unsigned32,
+ acSysFanTrayExistence INTEGER,
+ acSysFanTrayType SnmpAdminString,
+ acSysFanTrayLEDs OCTET STRING,
+ acSysFanTraySeverity INTEGER,
+ acSysFanTrayFansConfiguredSpeed OCTET STRING,
+ acSysFanTrayFansCurrentSpeed OCTET STRING,
+ acSysFanTrayFansStatus OCTET STRING
+ }
+
+
+
+ acSysFanTrayIndex OBJECT-TYPE
+ SYNTAX Unsigned32 (1..2147483647)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Fan-Tray's index in the system.
+AC INI-Param: N/A"
+ ::= {acSysFanTrayEntry 1}
+
+
+
+ acSysFanTrayGeographicalPosition OBJECT-TYPE
+ SYNTAX Unsigned32 (1..1)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The slot number in the chassis.
+AC INI-Param: N/A"
+ ::= {acSysFanTrayEntry 2}
+
+
+
+ acSysFanTrayExistence OBJECT-TYPE
+ SYNTAX INTEGER {
+ present(1)
+,
+ missing(2)
+
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Is the Fan-Tray present or missing.
+AC INI-Param: N/A"
+ ::= {acSysFanTrayEntry 3}
+
+
+
+ acSysFanTrayType OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..50))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The type of the Fan-Tray .
+AC INI-Param: N/A"
+ ::= {acSysFanTrayEntry 4}
+
+
+
+ acSysFanTrayLEDs OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (0..20))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object built as a bit-field which represents the Fan-Tray's
+LEDs status.
+The first four bites represent the System's LED status and
+the last four bites represent the Shelf-LED’s status.
+AC INI-Param: N/A"
+ ::= {acSysFanTrayEntry 5}
+
+
+
+ acSysFanTraySeverity OBJECT-TYPE
+ SYNTAX INTEGER {
+ cleared(0)
+,
+ indeterminate(1)
+,
+ warning(2)
+,
+ minor(3)
+,
+ major(4)
+,
+ critical(5)
+
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Severity of the whole fan tray according to the current
+active alarm in the alarm table: Critical, Major or cleared.
+AC INI-Param: N/A"
+ ::= {acSysFanTrayEntry 6}
+
+
+
+ acSysFanTrayFansConfiguredSpeed OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (0..8))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The fan's configured speed in Tach units (RPM/120). Each Byte
+represents a fan.
+AC INI-Param: N/A"
+ ::= {acSysFanTrayEntry 7}
+
+
+
+ acSysFanTrayFansCurrentSpeed OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (0..8))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The fan's mesured speed in Tach units (RPM/120). Each Byte represents
+a fan.
+AC INI-Param: N/A"
+ ::= {acSysFanTrayEntry 8}
+
+
+
+ acSysFanTrayFansStatus OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (0..1))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A bit field which display the working status of each fan in
+the Fan-Tray.
+0 - Working
+1 - Faulty.
+AC INI-Param: N/A"
+ ::= {acSysFanTrayEntry 9}
+
+
+
+ -- ****************************************
+ -- acSysPowerSupply table declaration
+ -- ****************************************
+ acSysPowerSupplyTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AcSysPowerSupplyEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ ""
+ ::= {acSystemChassis 23}
+
+
+
+ -- ****************************************
+ -- acSysPowerSupply table entry
+ -- ****************************************
+ acSysPowerSupplyEntry OBJECT-TYPE
+ SYNTAX AcSysPowerSupplyEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ ""
+ INDEX {acSysPowerSupplyIndex}
+ ::= {acSysPowerSupplyTable 1}
+
+
+
+ -- ****************************************
+ -- acSysPowerSupply TABLE
+ -- ****************************************
+ AcSysPowerSupplyEntry ::= SEQUENCE {
+ acSysPowerSupplyIndex Unsigned32,
+ acSysPowerSupplyGeographicalPosition Unsigned32,
+ acSysPowerSupplyExistence INTEGER,
+ acSysPowerSupplyHwversion SnmpAdminString,
+ acSysPowerSupplyLEDs OCTET STRING,
+ acSysPowerSupplySeverity INTEGER
+ }
+
+
+
+ acSysPowerSupplyIndex OBJECT-TYPE
+ SYNTAX Unsigned32 (1..2147483647)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Power-Supply's index in the system.
+AC INI-Param: N/A"
+ ::= {acSysPowerSupplyEntry 1}
+
+
+
+ acSysPowerSupplyGeographicalPosition OBJECT-TYPE
+ SYNTAX Unsigned32 (1..2)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The slot number in the chassis.
+AC INI-Param: N/A"
+ ::= {acSysPowerSupplyEntry 2}
+
+
+
+ acSysPowerSupplyExistence OBJECT-TYPE
+ SYNTAX INTEGER {
+ present(1)
+,
+ missing(2)
+
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Is the Power-Supply present or missing.
+AC INI-Param: N/A"
+ ::= {acSysPowerSupplyEntry 3}
+
+
+
+ acSysPowerSupplyHwversion OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..20))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "PS’s HW version.
+AC INI-Param: N/A"
+ ::= {acSysPowerSupplyEntry 4}
+
+
+
+ acSysPowerSupplyLEDs OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (0..20))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A bit-field representation of the Power-Supply LEDs' status.
+The first four bites represent the Power-Supply LED's status
+and the last four bites represent the Fault LED's status.
+AC INI-Param: N/A"
+ ::= {acSysPowerSupplyEntry 5}
+
+
+
+ acSysPowerSupplySeverity OBJECT-TYPE
+ SYNTAX INTEGER {
+ cleared(1)
+,
+ indeterminate(2)
+,
+ warning(3)
+,
+ minor(4)
+,
+ major(5)
+,
+ critical(6)
+
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Severity of the power-supply according to the current active
+alarm in the alarm table.
+AC INI-Param: N/A"
+ ::= {acSysPowerSupplyEntry 6}
+
+
+
+ -- ****************************************
+ -- acSysPEM table declaration
+ -- ****************************************
+ acSysPEMTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AcSysPEMEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ ""
+ ::= {acSystemChassis 24}
+
+
+
+ -- ****************************************
+ -- acSysPEM table entry
+ -- ****************************************
+ acSysPEMEntry OBJECT-TYPE
+ SYNTAX AcSysPEMEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ ""
+ INDEX {acSysPEMIndex}
+ ::= {acSysPEMTable 1}
+
+
+
+ -- ****************************************
+ -- acSysPEM TABLE
+ -- ****************************************
+ AcSysPEMEntry ::= SEQUENCE {
+ acSysPEMIndex Unsigned32,
+ acSysPEMGeographicalPosition Unsigned32,
+ acSysPEMExistence INTEGER,
+ acSysPEMType SnmpAdminString,
+ acSysPEMElectricWireConnection INTEGER
+ }
+
+
+
+ acSysPEMIndex OBJECT-TYPE
+ SYNTAX Unsigned32 (1..2147483647)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "PEM-Module's index in the system.
+AC INI-Param: N/A"
+ ::= {acSysPEMEntry 1}
+
+
+
+ acSysPEMGeographicalPosition OBJECT-TYPE
+ SYNTAX Unsigned32 (1..2)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The slot number in the chassis.
+AC INI-Param: N/A"
+ ::= {acSysPEMEntry 2}
+
+
+
+ acSysPEMExistence OBJECT-TYPE
+ SYNTAX INTEGER {
+ present(1)
+,
+ missing(2)
+
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Is the PEM-Module present or missing.
+AC INI-Param: N/A"
+ ::= {acSysPEMEntry 3}
+
+
+
+ acSysPEMType OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..20))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "PEM’s Type.
+AC INI-Param: N/A"
+ ::= {acSysPEMEntry 4}
+
+
+
+ acSysPEMElectricWireConnection OBJECT-TYPE
+ SYNTAX INTEGER {
+ connected(1)
+,
+ disconnected(2)
+
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Present the status of the electricity connector located on the
+PEM card.
+AC INI-Param: N/A"
+ ::= {acSysPEMEntry 5}
+
+
+
+ acSysSATModule OBJECT IDENTIFIER ::= {acSystemChassis 25}
+
+
+ -- ****************************************
+ -- acSysSAT table declaration
+ -- ****************************************
+ acSysSATTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AcSysSATEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ ""
+ ::= {acSysSATModule 21}
+
+
+
+ -- ****************************************
+ -- acSysSAT table entry
+ -- ****************************************
+ acSysSATEntry OBJECT-TYPE
+ SYNTAX AcSysSATEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ ""
+ INDEX {acSysSATSatIndex}
+ ::= {acSysSATTable 1}
+
+
+
+ -- ****************************************
+ -- acSysSAT TABLE
+ -- ****************************************
+ AcSysSATEntry ::= SEQUENCE {
+ acSysSATSatIndex Unsigned32,
+ acSysSATGeographicalPosition Unsigned32,
+ acSysSATType SnmpAdminString,
+ acSysSATInitInformation INTEGER,
+ acSysSATTimingUnitExistence INTEGER,
+ acSysSATTimingRefSelection INTEGER
+ }
+
+
+
+ acSysSATSatIndex OBJECT-TYPE
+ SYNTAX Unsigned32 (1..2)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "SAT-Module's index in the system.
+AC INI-Param: N/A"
+ ::= {acSysSATEntry 1}
+
+
+
+ acSysSATGeographicalPosition OBJECT-TYPE
+ SYNTAX Unsigned32 (2..4)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The slot number in the chassis.
+AC INI-Param: N/A"
+ ::= {acSysSATEntry 2}
+
+
+
+ acSysSATType OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..20))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "SAT’s Type.
+AC INI-Param: N/A"
+ ::= {acSysSATEntry 3}
+
+
+
+ acSysSATInitInformation OBJECT-TYPE
+ SYNTAX INTEGER {
+ detected(0)
+,
+ reConfig(1)
+,
+ reConfigTry2(2)
+,
+ reConfigTry3(3)
+,
+ notInitialized(4)
+,
+ initIsMissing(5)
+,
+ initWasReset(6)
+,
+ initFail(7)
+,
+ initInProgress(8)
+,
+ initUpdateREFTable(9)
+,
+ remoteKeepAlive(10)
+,
+ initComplete(11)
+
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Sat's Init Information.
+AC INI-Param: N/A"
+ ::= {acSysSATEntry 4}
+
+
+
+ acSysSATTimingUnitExistence OBJECT-TYPE
+ SYNTAX INTEGER {
+ exist(1)
+,
+ notExist(2)
+
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Is the Timig Unit present or missing.
+AC INI-Param: N/A"
+ ::= {acSysSATEntry 5}
+
+
+
+ acSysSATTimingRefSelection OBJECT-TYPE
+ SYNTAX INTEGER {
+ bITSNOREF(0)
+,
+ rEFFromBITSA(1)
+,
+ rEFFromBITSB(2)
+,
+ bITSNOREF1(3)
+,
+ rEFFromLineClock1(4)
+,
+ rEFFromLineClock2(5)
+,
+ rEFFromLineClock3(6)
+,
+ rEFFromLineClock7(7)
+
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "SAT's Timing Reference Selection.
+AC INI-Param: N/A"
+ ::= {acSysSATEntry 6}
+
+
+
+ -- ****************************************
+ -- acSysSATFramers table declaration
+ -- ****************************************
+ acSysSATFramersTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AcSysSATFramersEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ ""
+ ::= {acSysSATModule 22}
+
+
+
+ -- ****************************************
+ -- acSysSATFramers table entry
+ -- ****************************************
+ acSysSATFramersEntry OBJECT-TYPE
+ SYNTAX AcSysSATFramersEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ ""
+ INDEX {acSysSATFramersSatIndex,acSysSATFramersFramerIndex}
+ ::= {acSysSATFramersTable 1}
+
+
+
+ -- ****************************************
+ -- acSysSATFramers TABLE
+ -- ****************************************
+ AcSysSATFramersEntry ::= SEQUENCE {
+ acSysSATFramersSatIndex Unsigned32,
+ acSysSATFramersFramerIndex Unsigned32,
+ acSysSATFramersFramerInterfaceStatus INTEGER,
+ acSysSATFramersFramerLoopBackRef INTEGER,
+ acSysSATFramersFramerInterfaceType INTEGER,
+ acSysSATFramersFramerTransmitControl INTEGER,
+ acSysSATFramersRxStatus INTEGER,
+ acSysSATFramersIsUsedAsPLLClock INTEGER
+ }
+
+
+
+ acSysSATFramersSatIndex OBJECT-TYPE
+ SYNTAX Unsigned32 (1..2)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "SAT-Module's index in the system.
+AC INI-Param: N/A"
+ ::= {acSysSATFramersEntry 1}
+
+
+
+ acSysSATFramersFramerIndex OBJECT-TYPE
+ SYNTAX Unsigned32 (1..2)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Framer's Index.
+AC INI-Param: N/A"
+ ::= {acSysSATFramersEntry 2}
+
+
+
+ acSysSATFramersFramerInterfaceStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ framerInitialized(0)
+,
+ framerNotInitialized(1)
+
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Framer Interface Status.
+AC INI-Param: N/A"
+ ::= {acSysSATFramersEntry 3}
+
+
+
+ acSysSATFramersFramerLoopBackRef OBJECT-TYPE
+ SYNTAX INTEGER {
+ loopdisable(0)
+,
+ loopenable(1)
+
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Frame rLoop Back Reference.
+AC INI-Param: N/A"
+ ::= {acSysSATFramersEntry 4}
+
+
+
+ acSysSATFramersFramerInterfaceType OBJECT-TYPE
+ SYNTAX INTEGER {
+ e1CRC4(0)
+,
+ e1CAS(1)
+,
+ e1FAS(2)
+,
+ t1D4(3)
+,
+ t1ESF(4)
+,
+ t12(5)
+
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Framer Interface Type.
+AC INI-Param: N/A"
+ ::= {acSysSATFramersEntry 5}
+
+
+
+ acSysSATFramersFramerTransmitControl OBJECT-TYPE
+ SYNTAX INTEGER {
+ systemClock(0)
+,
+ aIS(1)
+,
+ disableTransmit(2)
+
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Framer Transmit Control.
+AC INI-Param: N/A"
+ ::= {acSysSATFramersEntry 6}
+
+
+
+ acSysSATFramersRxStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ alarmClear(0)
+,
+ lOFAlarm(1)
+,
+ lOSAlarm(2)
+,
+ aISAlarm(3)
+,
+ aISInit(4)
+
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Provides the alarm status of the clock interface.
+AC INI-Param: N/A"
+ ::= {acSysSATFramersEntry 7}
+
+
+
+ acSysSATFramersIsUsedAsPLLClock OBJECT-TYPE
+ SYNTAX INTEGER {
+ notUsed(0)
+,
+ used(1)
+
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Is Used As PLL Clock indication.
+AC INI-Param: N/A"
+ ::= {acSysSATFramersEntry 8}
+
+
+
+ acSysTimingModule OBJECT IDENTIFIER ::= {acSystemChassis 26}
+
+
+ -- ****************************************
+ -- acSysPLLStatus table declaration
+ -- ****************************************
+ acSysPLLStatusTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AcSysPLLStatusEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ ""
+ ::= {acSysTimingModule 21}
+
+
+
+ -- ****************************************
+ -- acSysPLLStatus table entry
+ -- ****************************************
+ acSysPLLStatusEntry OBJECT-TYPE
+ SYNTAX AcSysPLLStatusEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ ""
+ INDEX {acSysPLLStatusIndex}
+ ::= {acSysPLLStatusTable 1}
+
+
+
+ -- ****************************************
+ -- acSysPLLStatus TABLE
+ -- ****************************************
+ AcSysPLLStatusEntry ::= SEQUENCE {
+ acSysPLLStatusIndex Unsigned32,
+ acSysPLLStatusOperatingMode INTEGER
+ }
+
+
+
+ acSysPLLStatusIndex OBJECT-TYPE
+ SYNTAX Unsigned32 (0..1)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Table's Index.
+AC INI-Param: N/A"
+ ::= {acSysPLLStatusEntry 1}
+
+
+
+ acSysPLLStatusOperatingMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ freeRun(0)
+,
+ lockToRef1(1)
+,
+ lockToRef2(2)
+,
+ lockToLocal(3)
+,
+ holdOver(4)
+
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "PLL's Current Operating Mode.
+AC INI-Param: N/A"
+ ::= {acSysPLLStatusEntry 2}
+
+
+
+ acSystemChassisHA OBJECT IDENTIFIER ::= {acSystemChassis 27}
+
+
+ acSystemChassisHADevice1Name OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..128))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Define the unit identification name of the first unit of HA
+system.
+Relevant to M4K and SW-SBC.
+Access: Instant.
+AC INI-Param: HAUnitIdName"
+ ::= {acSystemChassisHA 1}
+
+
+
+ acSystemChassisHADevice2Name OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..128))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Define the unit identification name of the second unit of HA
+system.
+Relevant to M4K and SW-SBC.
+Access: Instant.
+AC INI-Param: HAUnitIdName"
+ ::= {acSystemChassisHA 2}
+
+
+
+ acSystemChassisHAActiveDevice OBJECT-TYPE
+ SYNTAX INTEGER {
+ notApplicable(0)
+,
+ device1(1)
+,
+ device2(2)
+,
+ standAlone(3)
+
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Specifies the active device.
+Relevant to M4K and SW-SBC.
+AC INI-Param: N/A"
+ ::= {acSystemChassisHA 3}
+
+
+
+ -- ****************************************
+ -- acSysRedundantModule table declaration
+ -- ****************************************
+ acSysRedundantModuleTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AcSysRedundantModuleEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ " Relevant only to M4K."
+ ::= {acSystemChassisHA 21}
+
+
+
+ -- ****************************************
+ -- acSysRedundantModule table entry
+ -- ****************************************
+ acSysRedundantModuleEntry OBJECT-TYPE
+ SYNTAX AcSysRedundantModuleEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ ""
+ INDEX {acSysRedundantModuleIndex}
+ ::= {acSysRedundantModuleTable 1}
+
+
+
+ -- ****************************************
+ -- acSysRedundantModule TABLE
+ -- ****************************************
+ AcSysRedundantModuleEntry ::= SEQUENCE {
+ acSysRedundantModuleIndex Unsigned32,
+ acSysRedundantModuleGeographicalPosition Unsigned32,
+ acSysRedundantModuleType INTEGER,
+ acSysRedundantModulePresence INTEGER,
+ acSysRedundantModuleLicenseKeyList SnmpAdminString,
+ acSysRedundantModuleSerialNumber Integer32,
+ acSysRedundantModuleSWVersion SnmpAdminString,
+ acSysRedundantModuleOperationalState INTEGER,
+ acSysRedundantModuleHAStatus INTEGER,
+ acSysRedundantModuleLEDs OCTET STRING,
+ acSysRedundantModuleTemperature Integer32,
+ acSysRedundantModuleActions INTEGER,
+ acSysRedundantModuleFRUaction INTEGER,
+ acSysRedundantModuleFRUstatus INTEGER,
+ acSysRedundantModuleNumOfPorts Unsigned32,
+ acSysRedundantModuleFirstPortNum Unsigned32
+ }
+
+
+
+ acSysRedundantModuleIndex OBJECT-TYPE
+ SYNTAX Unsigned32 (1..2147483647)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The Module number in the system.
+AC INI-Param: N/A"
+ ::= {acSysRedundantModuleEntry 1}
+
+
+
+ acSysRedundantModuleGeographicalPosition OBJECT-TYPE
+ SYNTAX Unsigned32 (1..12)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The CPU slot number of the redundant board.
+AC INI-Param: N/A"
+ ::= {acSysRedundantModuleEntry 2}
+
+
+
+ acSysRedundantModuleType OBJECT-TYPE
+ SYNTAX INTEGER {
+ acUnknown(0)
+,
+ acMediant4000CPUmodule(280)
+,
+ acMediant4000MPModule(295)
+,
+ acMediant2600CPUmodule(308)
+,
+ acMediant2600MPModule(309)
+
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The module's type.
+AC INI-Param: N/A"
+ ::= {acSysRedundantModuleEntry 3}
+
+
+
+ acSysRedundantModulePresence OBJECT-TYPE
+ SYNTAX INTEGER {
+ present(1)
+,
+ missing(2)
+
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Is the module present or missing.
+AC INI-Param: N/A"
+ ::= {acSysRedundantModuleEntry 4}
+
+
+
+ acSysRedundantModuleLicenseKeyList OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..1400))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "List of active features as enabled by the license key. SA modules
+return NULL.
+AC INI-Param: N/A"
+ ::= {acSysRedundantModuleEntry 5}
+
+
+
+ acSysRedundantModuleSerialNumber OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The module's serial number.
+For 6310 the serial number is the decimal form of the last
+5 characters in the MAC Address.
+ SA modules return 0.
+ When the modules in the table are unavailable for audit (no
+HA) (-1) is returned.
+AC INI-Param: N/A"
+ ::= {acSysRedundantModuleEntry 6}
+
+
+
+ acSysRedundantModuleSWVersion OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..20))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The version of the SW being run in the module placed .
+ SA Modules return NULL.
+AC INI-Param: N/A"
+ ::= {acSysRedundantModuleEntry 7}
+
+
+
+ acSysRedundantModuleOperationalState OBJECT-TYPE
+ SYNTAX INTEGER {
+ disable(1)
+,
+ enable(2)
+
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The operational state of the module. Determined internally by
+the system.
+AC INI-Param: N/A"
+ ::= {acSysRedundantModuleEntry 8}
+
+
+
+ acSysRedundantModuleHAStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ acitveNonHA(1)
+,
+ active(2)
+,
+ redundant(3)
+,
+ standAlone(4)
+,
+ redundantNonHA(5)
+,
+ notApplicable(6)
+
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Modules status with in the system. Designed to define the HA
+state.
+AC INI-Param: N/A"
+ ::= {acSysRedundantModuleEntry 9}
+
+
+
+ acSysRedundantModuleLEDs OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (0..50))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Bit Field for the LEDs on the front of the module.
+LSB in each nibble (half Byte) is 0 - constant, 1 - blinking.
+3 MSB are the color -
+ 0 - none
+ 1- Green
+ 2 - Red
+ 3 - Yellow
+ 4 - Orange
+ 5 - Blue
+ 7 - Gray (unknown).
+AC INI-Param: N/A"
+ ::= {acSysRedundantModuleEntry 10}
+
+
+
+ acSysRedundantModuleTemperature OBJECT-TYPE
+ SYNTAX Integer32 (-1..100)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Temperature of the board in degrees Celsius. SA Modules return
+0.
+AC INI-Param: N/A"
+ ::= {acSysRedundantModuleEntry 11}
+
+
+
+ acSysRedundantModuleActions OBJECT-TYPE
+ SYNTAX INTEGER {
+ reset(1)
+,
+ actionDone(3)
+
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Actions to be performed by the module.
+Access: Instant.
+AC INI-Param: N/A"
+ ::= {acSysRedundantModuleEntry 12}
+
+
+
+ acSysRedundantModuleFRUaction OBJECT-TYPE
+ SYNTAX INTEGER {
+ fruActionDone(1)
+,
+ fruOutOfServiceAction(2)
+,
+ fruBackToServiceAction(3)
+,
+ fruNotApplicable(4)
+
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Field Replace Unit actions
+Relevant to IF-Module only.
+Access: Instant.
+AC INI-Param: N/A"
+ ::= {acSysRedundantModuleEntry 13}
+
+
+
+ acSysRedundantModuleFRUstatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ moduleNotExist(1)
+,
+ moduleExistOk(2)
+,
+ moduleOutOfService(3)
+,
+ moduleBackToServiceStart(4)
+,
+ moduleMismatch(5)
+,
+ moduleFaulty(6)
+,
+ notApplicable(7)
+
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Field Replace Unit module's status.
+AC INI-Param: N/A"
+ ::= {acSysRedundantModuleEntry 14}
+
+
+
+ acSysRedundantModuleNumOfPorts OBJECT-TYPE
+ SYNTAX Unsigned32 (1..4)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of physical interfaces in a module, analog or digital.
+AC INI-Param: N/A"
+ ::= {acSysRedundantModuleEntry 15}
+
+
+
+ acSysRedundantModuleFirstPortNum OBJECT-TYPE
+ SYNTAX Unsigned32 (0..19)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The logical number as seen in the general trunk/analog-channel
+table of the first port in the module in question.
+Since analog and digital ports can be operational at once,
+analog and digital ports may have same logical number.
+AC INI-Param: N/A"
+ ::= {acSysRedundantModuleEntry 16}
+
+
+
+ -- ****************************************
+ -- acSysRedundantFanTray table declaration
+ -- ****************************************
+ acSysRedundantFanTrayTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AcSysRedundantFanTrayEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ " Relevant only to M4K."
+ ::= {acSystemChassisHA 22}
+
+
+
+ -- ****************************************
+ -- acSysRedundantFanTray table entry
+ -- ****************************************
+ acSysRedundantFanTrayEntry OBJECT-TYPE
+ SYNTAX AcSysRedundantFanTrayEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ ""
+ INDEX {acSysRedundantFanTrayIndex}
+ ::= {acSysRedundantFanTrayTable 1}
+
+
+
+ -- ****************************************
+ -- acSysRedundantFanTray TABLE
+ -- ****************************************
+ AcSysRedundantFanTrayEntry ::= SEQUENCE {
+ acSysRedundantFanTrayIndex Unsigned32,
+ acSysRedundantFanTrayGeographicalPosition Unsigned32,
+ acSysRedundantFanTrayExistence INTEGER,
+ acSysRedundantFanTrayType SnmpAdminString,
+ acSysRedundantFanTrayLEDs OCTET STRING,
+ acSysRedundantFanTraySeverity INTEGER,
+ acSysRedundantFanTrayFansConfiguredSpeed OCTET STRING,
+ acSysRedundantFanTrayFansCurrentSpeed OCTET STRING,
+ acSysRedundantFanTrayFansStatus OCTET STRING
+ }
+
+
+
+ acSysRedundantFanTrayIndex OBJECT-TYPE
+ SYNTAX Unsigned32 (1..2147483647)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Fan-Tray's index in the system.
+AC INI-Param: N/A"
+ ::= {acSysRedundantFanTrayEntry 1}
+
+
+
+ acSysRedundantFanTrayGeographicalPosition OBJECT-TYPE
+ SYNTAX Unsigned32 (1..1)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The slot number in the chassis.
+AC INI-Param: N/A"
+ ::= {acSysRedundantFanTrayEntry 2}
+
+
+
+ acSysRedundantFanTrayExistence OBJECT-TYPE
+ SYNTAX INTEGER {
+ present(1)
+,
+ missing(2)
+
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Is the Fan-Tray present or missing.
+AC INI-Param: N/A"
+ ::= {acSysRedundantFanTrayEntry 3}
+
+
+
+ acSysRedundantFanTrayType OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..50))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The type of the Fan-Tray .
+AC INI-Param: N/A"
+ ::= {acSysRedundantFanTrayEntry 4}
+
+
+
+ acSysRedundantFanTrayLEDs OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (0..20))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object built as a bit-field which represents the Fan-Tray's
+LEDs status.
+The first four bites represent the System's LED status and
+the last four bites represent the Shelf-LED’s status.
+AC INI-Param: N/A"
+ ::= {acSysRedundantFanTrayEntry 5}
+
+
+
+ acSysRedundantFanTraySeverity OBJECT-TYPE
+ SYNTAX INTEGER {
+ cleared(0)
+,
+ indeterminate(1)
+,
+ warning(2)
+,
+ minor(3)
+,
+ major(4)
+,
+ critical(5)
+
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Severity of the whole fan tray according to the current
+active alarm in the alarm table: Critical, Major or cleared.
+AC INI-Param: N/A"
+ ::= {acSysRedundantFanTrayEntry 6}
+
+
+
+ acSysRedundantFanTrayFansConfiguredSpeed OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (0..8))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The fan's configured speed in Tach units (RPM/120). Each Byte
+represents a fan.
+AC INI-Param: N/A"
+ ::= {acSysRedundantFanTrayEntry 7}
+
+
+
+ acSysRedundantFanTrayFansCurrentSpeed OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (0..8))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The fan's mesured speed in Tach units (RPM/120). Each Byte represents
+a fan.
+AC INI-Param: N/A"
+ ::= {acSysRedundantFanTrayEntry 8}
+
+
+
+ acSysRedundantFanTrayFansStatus OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (0..1))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A bit field which display the working status of each fan in
+the Fan-Tray.
+0 - Working
+1 - Faulty.
+AC INI-Param: N/A"
+ ::= {acSysRedundantFanTrayEntry 9}
+
+
+
+ -- ****************************************
+ -- acSysRedundantPowerSupply table declaration
+ -- ****************************************
+ acSysRedundantPowerSupplyTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AcSysRedundantPowerSupplyEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ " Relevant only to M4K."
+ ::= {acSystemChassisHA 23}
+
+
+
+ -- ****************************************
+ -- acSysRedundantPowerSupply table entry
+ -- ****************************************
+ acSysRedundantPowerSupplyEntry OBJECT-TYPE
+ SYNTAX AcSysRedundantPowerSupplyEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ ""
+ INDEX {acSysRedundantPowerSupplyIndex}
+ ::= {acSysRedundantPowerSupplyTable 1}
+
+
+
+ -- ****************************************
+ -- acSysRedundantPowerSupply TABLE
+ -- ****************************************
+ AcSysRedundantPowerSupplyEntry ::= SEQUENCE {
+ acSysRedundantPowerSupplyIndex Unsigned32,
+ acSysRedundantPowerSupplyGeographicalPosition Unsigned32,
+ acSysRedundantPowerSupplyExistence INTEGER,
+ acSysRedundantPowerSupplyHwversion SnmpAdminString,
+ acSysRedundantPowerSupplyLEDs OCTET STRING,
+ acSysRedundantPowerSupplySeverity INTEGER
+ }
+
+
+
+ acSysRedundantPowerSupplyIndex OBJECT-TYPE
+ SYNTAX Unsigned32 (1..2147483647)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Power-Supply's index in the system.
+AC INI-Param: N/A"
+ ::= {acSysRedundantPowerSupplyEntry 1}
+
+
+
+ acSysRedundantPowerSupplyGeographicalPosition OBJECT-TYPE
+ SYNTAX Unsigned32 (1..2)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The slot number in the chassis.
+AC INI-Param: N/A"
+ ::= {acSysRedundantPowerSupplyEntry 2}
+
+
+
+ acSysRedundantPowerSupplyExistence OBJECT-TYPE
+ SYNTAX INTEGER {
+ present(1)
+,
+ missing(2)
+
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Is the Power-Supply present or missing.
+AC INI-Param: N/A"
+ ::= {acSysRedundantPowerSupplyEntry 3}
+
+
+
+ acSysRedundantPowerSupplyHwversion OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..20))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "PS’s HW version.
+AC INI-Param: N/A"
+ ::= {acSysRedundantPowerSupplyEntry 4}
+
+
+
+ acSysRedundantPowerSupplyLEDs OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (0..20))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A bit-field representation of the Power-Supply LEDs' status.
+The first four bites represent the Power-Supply LED's status
+and the last four bites represent the Fault LED's status.
+AC INI-Param: N/A"
+ ::= {acSysRedundantPowerSupplyEntry 5}
+
+
+
+ acSysRedundantPowerSupplySeverity OBJECT-TYPE
+ SYNTAX INTEGER {
+ cleared(1)
+,
+ indeterminate(2)
+,
+ warning(3)
+,
+ minor(4)
+,
+ major(5)
+,
+ critical(6)
+
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Severity of the power-supply according to the current active
+alarm in the alarm table.
+AC INI-Param: N/A"
+ ::= {acSysRedundantPowerSupplyEntry 6}
+
+
+
+
+
+END
|