diff options
Diffstat (limited to 'MIBS/audiocodes/AC-PMMEDIA-MIB')
| -rw-r--r-- | MIBS/audiocodes/AC-PMMEDIA-MIB | 5415 |
1 files changed, 5415 insertions, 0 deletions
diff --git a/MIBS/audiocodes/AC-PMMEDIA-MIB b/MIBS/audiocodes/AC-PMMEDIA-MIB new file mode 100644 index 0000000..a842392 --- /dev/null +++ b/MIBS/audiocodes/AC-PMMEDIA-MIB @@ -0,0 +1,5415 @@ +
+AC-PM-Media-MIB DEFINITIONS ::= BEGIN
+
+
+ IMPORTS
+
+
+ OBJECT-TYPE,
+ MODULE-IDENTITY FROM SNMPv2-SMI
+ TAddress,
+ DisplayString,
+ DateAndTime, TEXTUAL-CONVENTION FROM SNMPv2-TC
+ IpAddress FROM RFC1155-SMI
+ Unsigned32,
+ Integer32,
+ enterprises FROM SNMPv2-SMI
+ SnmpAdminString FROM SNMP-FRAMEWORK-MIB
+ audioCodes,
+ acRegistrations,
+ acGeneric,
+ acProducts,acBoardMibs,acPerformance FROM AUDIOCODES-TYPES-MIB;
+
+
+acPMMedia MODULE-IDENTITY
+ LAST-UPDATED "201207260522Z" --Thursday, July 26 2012
+ ORGANIZATION "AudioCodes Ltd"
+ CONTACT-INFO
+ "Postal: Support
+ AudioCodes LTD
+ 1 Hayarden Street
+ Airport City
+ Lod, ISRAEL 70151
+ Tel: 972-3-9764000
+ Fax: 972-3-9764040
+ Email: support@audiocodes.com
+ Web: www.audiocodes.com"
+
+
+ DESCRIPTION
+ "The AC-PM-Media MIB offers performance monitoring
+For the Media related elements in Audiocodes' devices.
+The Configuration sub-tree is for configuring the interval
+Period length for the entire AC-PM-Media MIB, and the
+different tables' thresholds.
+The Data sub-tree presents the tables of monitored
+elements.
+
+Note - for the entire MIB the value (-1) means the value
+Asked for is either not supported or currently not relevant
+(this is for when values asked for are for intervals not yet
+recorded."
+
+
+
+ ::= {acPerformance 7}
+
+
+
+
+
+
+
+
+ acPMMediaConfiguration OBJECT IDENTIFIER ::= {acPMMedia 1}
+
+
+ acPMMediaConfigurationPeriodLength OBJECT-TYPE
+ SYNTAX Unsigned32 (0..894780)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Length of monitoring intervals for entire MIB.
+Time is in minutes.
+Access: Instant."
+ ::= {acPMMediaConfiguration 1}
+
+
+
+ acPMMediaConfigurationResetTotalCounters OBJECT-TYPE
+ SYNTAX INTEGER {
+ resetCountersDone(1)
+,
+ resetTotalCounters(2)
+
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Total-Counters Reset. To reset the total counters, set the
+value of this object to resetTotalCounters(2).
+Access: Instant."
+ ::= {acPMMediaConfiguration 2}
+
+
+
+ acPMDSPAttributes OBJECT IDENTIFIER ::= {acPMMediaConfiguration 31}
+
+
+ acPMDSPAttributesDSPUtilHighThreshold OBJECT-TYPE
+ SYNTAX Unsigned32 (0..2147483647)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "High threshold.
+Access: Instant."
+ ::= {acPMDSPAttributes 1}
+
+
+
+ acPMDSPAttributesDSPUtilLowThreshold OBJECT-TYPE
+ SYNTAX Unsigned32 (0..2147483647)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Low threshold.
+Access: Instant."
+ ::= {acPMDSPAttributes 2}
+
+
+
+ acPMCodersAttributes OBJECT IDENTIFIER ::= {acPMMediaConfiguration 32}
+
+
+ acPMCodersAttributesChannelsPerCoderHighThreshold OBJECT-TYPE
+ SYNTAX Unsigned32 (0..2147483647)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "High threshold.
+Access: Instant."
+ ::= {acPMCodersAttributes 1}
+
+
+
+ acPMCodersAttributesChannelsPerCoderLowThreshold OBJECT-TYPE
+ SYNTAX Unsigned32 (0..2147483647)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Low threshold.
+Access: Instant."
+ ::= {acPMCodersAttributes 2}
+
+
+
+ acPMNetworkingAttributes OBJECT IDENTIFIER ::= {acPMMediaConfiguration 33}
+
+
+ acPMNetworkingAttributesPacketDelayHighThreshold OBJECT-TYPE
+ SYNTAX Unsigned32 (0..2147483647)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "High threshold.
+Access: Instant."
+ ::= {acPMNetworkingAttributes 1}
+
+
+
+ acPMNetworkingAttributesPacketDelayLowThreshold OBJECT-TYPE
+ SYNTAX Unsigned32 (0..2147483647)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Low threshold.
+Access: Instant."
+ ::= {acPMNetworkingAttributes 2}
+
+
+
+ acPMNetworkingAttributesPacketJitterHighThreshold OBJECT-TYPE
+ SYNTAX Unsigned32 (0..2147483647)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "High threshold.
+Access: Instant."
+ ::= {acPMNetworkingAttributes 3}
+
+
+
+ acPMNetworkingAttributesPacketJitterLowThreshold OBJECT-TYPE
+ SYNTAX Unsigned32 (0..2147483647)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Low threshold.
+Access: Instant."
+ ::= {acPMNetworkingAttributes 4}
+
+
+
+ acPMNetworkingAttributesRTPBytesTxHighThreshold OBJECT-TYPE
+ SYNTAX Unsigned32 (0..2147483647)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "High threshold.
+Access: Instant."
+ ::= {acPMNetworkingAttributes 5}
+
+
+
+ acPMNetworkingAttributesRTPBytesTxLowThreshold OBJECT-TYPE
+ SYNTAX Unsigned32 (0..2147483647)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Low threshold.
+Access: Instant."
+ ::= {acPMNetworkingAttributes 6}
+
+
+
+ acPMNetworkingAttributesRTPBytesRxHighThreshold OBJECT-TYPE
+ SYNTAX Unsigned32 (0..2147483647)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "High threshold.
+Access: Instant."
+ ::= {acPMNetworkingAttributes 7}
+
+
+
+ acPMNetworkingAttributesRTPBytesRxLowThreshold OBJECT-TYPE
+ SYNTAX Unsigned32 (0..2147483647)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Low threshold.
+Access: Instant."
+ ::= {acPMNetworkingAttributes 8}
+
+
+
+ acPMNetworkingAttributesRTPPacketsTxHighThreshold OBJECT-TYPE
+ SYNTAX Unsigned32 (0..2147483647)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "High threshold.
+Access: Instant."
+ ::= {acPMNetworkingAttributes 9}
+
+
+
+ acPMNetworkingAttributesRTPPacketsTxLowThreshold OBJECT-TYPE
+ SYNTAX Unsigned32 (0..2147483647)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Low threshold.
+Access: Instant."
+ ::= {acPMNetworkingAttributes 10}
+
+
+
+ acPMNetworkingAttributesRTPPacketsRxHighThreshold OBJECT-TYPE
+ SYNTAX Unsigned32 (0..2147483647)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "High threshold.
+Access: Instant."
+ ::= {acPMNetworkingAttributes 11}
+
+
+
+ acPMNetworkingAttributesRTPPacketsRxLowThreshold OBJECT-TYPE
+ SYNTAX Unsigned32 (0..2147483647)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Low threshold.
+Access: Instant."
+ ::= {acPMNetworkingAttributes 12}
+
+
+
+ acPMNetworkingAttributesRTPPacketLossRxHighThreshold OBJECT-TYPE
+ SYNTAX Unsigned32 (0..2147483647)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "High threshold.
+Access: Instant."
+ ::= {acPMNetworkingAttributes 13}
+
+
+
+ acPMNetworkingAttributesRTPPacketLossRxLowThreshold OBJECT-TYPE
+ SYNTAX Unsigned32 (0..2147483647)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Low threshold.
+Access: Instant."
+ ::= {acPMNetworkingAttributes 14}
+
+
+
+ acPMNetworkingAttributesRTPPacketLossTxHighThreshold OBJECT-TYPE
+ SYNTAX Unsigned32 (0..2147483647)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "High threshold.
+Access: Instant."
+ ::= {acPMNetworkingAttributes 15}
+
+
+
+ acPMNetworkingAttributesRTPPacketLossTxLowThreshold OBJECT-TYPE
+ SYNTAX Unsigned32 (0..2147483647)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Low threshold.
+Access: Instant."
+ ::= {acPMNetworkingAttributes 16}
+
+
+
+ acPMNetworkingAttributesModuleRTPPacketLossRxHighThreshold OBJECT-TYPE
+ SYNTAX Unsigned32 (0..2147483647)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "High threshold.
+Access: Instant."
+ ::= {acPMNetworkingAttributes 17}
+
+
+
+ acPMNetworkingAttributesModuleRTPPacketLossRxLowThreshold OBJECT-TYPE
+ SYNTAX Unsigned32 (0..2147483647)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Low threshold.
+Access: Instant."
+ ::= {acPMNetworkingAttributes 18}
+
+
+
+ acPMNetworkingAttributesModuleRTPPacketLossTxHighThreshold OBJECT-TYPE
+ SYNTAX Unsigned32 (0..2147483647)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "High threshold.
+Access: Instant."
+ ::= {acPMNetworkingAttributes 19}
+
+
+
+ acPMNetworkingAttributesModuleRTPPacketLossTxLowThreshold OBJECT-TYPE
+ SYNTAX Unsigned32 (0..2147483647)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Low threshold.
+Access: Instant."
+ ::= {acPMNetworkingAttributes 20}
+
+
+
+ acPMMediaNetworkingAggregatedAttributes OBJECT IDENTIFIER ::= {acPMNetworkingAttributes 21}
+
+
+ acPMMediaNetworkingAggregatedAttributesPacketDelayHighThreshold OBJECT-TYPE
+ SYNTAX Unsigned32 (0..2147483647)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "High threshold.
+Access: Instant."
+ ::= {acPMMediaNetworkingAggregatedAttributes 1}
+
+
+
+ acPMMediaNetworkingAggregatedAttributesPacketDelayLowThreshold OBJECT-TYPE
+ SYNTAX Unsigned32 (0..2147483647)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Low threshold.
+Access: Instant."
+ ::= {acPMMediaNetworkingAggregatedAttributes 2}
+
+
+
+ acPMMediaNetworkingAggregatedAttributesPacketJitterHighThreshold OBJECT-TYPE
+ SYNTAX Unsigned32 (0..2147483647)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "High threshold.
+Access: Instant."
+ ::= {acPMMediaNetworkingAggregatedAttributes 3}
+
+
+
+ acPMMediaNetworkingAggregatedAttributesPacketJitterLowThreshold OBJECT-TYPE
+ SYNTAX Unsigned32 (0..2147483647)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Low threshold.
+Access: Instant."
+ ::= {acPMMediaNetworkingAggregatedAttributes 4}
+
+
+
+ acPMMediaNetworkingAggregatedAttributesRTPBytesTxHighThreshold OBJECT-TYPE
+ SYNTAX Unsigned32 (0..2147483647)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "High threshold.
+Access: Instant."
+ ::= {acPMMediaNetworkingAggregatedAttributes 5}
+
+
+
+ acPMMediaNetworkingAggregatedAttributesRTPBytesTxLowThreshold OBJECT-TYPE
+ SYNTAX Unsigned32 (0..2147483647)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Low threshold.
+Access: Instant."
+ ::= {acPMMediaNetworkingAggregatedAttributes 6}
+
+
+
+ acPMMediaNetworkingAggregatedAttributesRTPBytesRxHighThreshold OBJECT-TYPE
+ SYNTAX Unsigned32 (0..2147483647)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "High threshold.
+Access: Instant."
+ ::= {acPMMediaNetworkingAggregatedAttributes 7}
+
+
+
+ acPMMediaNetworkingAggregatedAttributesRTPBytesRxLowThreshold OBJECT-TYPE
+ SYNTAX Unsigned32 (0..2147483647)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Low threshold.
+Access: Instant."
+ ::= {acPMMediaNetworkingAggregatedAttributes 8}
+
+
+
+ acPMMediaNetworkingAggregatedAttributesRTPPacketsTxHighThreshold OBJECT-TYPE
+ SYNTAX Unsigned32 (0..2147483647)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "High threshold.
+Access: Instant."
+ ::= {acPMMediaNetworkingAggregatedAttributes 9}
+
+
+
+ acPMMediaNetworkingAggregatedAttributesRTPPacketsTxLowThreshold OBJECT-TYPE
+ SYNTAX Unsigned32 (0..2147483647)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Low threshold.
+Access: Instant."
+ ::= {acPMMediaNetworkingAggregatedAttributes 10}
+
+
+
+ acPMMediaNetworkingAggregatedAttributesRTPPacketsRxHighThreshold OBJECT-TYPE
+ SYNTAX Unsigned32 (0..2147483647)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "High threshold.
+Access: Instant."
+ ::= {acPMMediaNetworkingAggregatedAttributes 11}
+
+
+
+ acPMMediaNetworkingAggregatedAttributesRTPPacketsRxLowThreshold OBJECT-TYPE
+ SYNTAX Unsigned32 (0..2147483647)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Low threshold.
+Access: Instant."
+ ::= {acPMMediaNetworkingAggregatedAttributes 12}
+
+
+
+ acPMMediaChannelUtilizationAttr OBJECT IDENTIFIER ::= {acPMMediaConfiguration 34}
+
+
+ acPMMediaChannelUtilizationAttrFaxChannelsHighThreshold OBJECT-TYPE
+ SYNTAX Unsigned32 (0..2147483647)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "High threshold.
+Access: Instant."
+ ::= {acPMMediaChannelUtilizationAttr 1}
+
+
+
+ acPMMediaChannelUtilizationAttrFaxChannelsLowThreshold OBJECT-TYPE
+ SYNTAX Unsigned32 (0..2147483647)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Low threshold.
+Access: Instant."
+ ::= {acPMMediaChannelUtilizationAttr 2}
+
+
+
+ acPMMediaChannelUtilizationAttrModemChannelsHighThreshold OBJECT-TYPE
+ SYNTAX Unsigned32 (0..2147483647)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "High threshold.
+Access: Instant."
+ ::= {acPMMediaChannelUtilizationAttr 3}
+
+
+
+ acPMMediaChannelUtilizationAttrModemChannelsLowThreshold OBJECT-TYPE
+ SYNTAX Unsigned32 (0..2147483647)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Low threshold.
+Access: Instant."
+ ::= {acPMMediaChannelUtilizationAttr 4}
+
+
+
+ acPMMediaChannelUtilizationAttrTDM2IPChannelsHighThreshold OBJECT-TYPE
+ SYNTAX Unsigned32 (0..2147483647)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "High threshold.
+Access: Instant."
+ ::= {acPMMediaChannelUtilizationAttr 5}
+
+
+
+ acPMMediaChannelUtilizationAttrTDM2IPChannelsLowThreshold OBJECT-TYPE
+ SYNTAX Unsigned32 (0..2147483647)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Low threshold.
+Access: Instant."
+ ::= {acPMMediaChannelUtilizationAttr 6}
+
+
+
+ acPMMediaChannelUtilizationAttrRTPStreamsHighThreshold OBJECT-TYPE
+ SYNTAX Unsigned32 (0..2147483647)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "High threshold.
+Access: Instant."
+ ::= {acPMMediaChannelUtilizationAttr 7}
+
+
+
+ acPMMediaChannelUtilizationAttrRTPStreamsLowThreshold OBJECT-TYPE
+ SYNTAX Unsigned32 (0..2147483647)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Low threshold.
+Access: Instant."
+ ::= {acPMMediaChannelUtilizationAttr 8}
+
+
+
+ acPMMediaChannelUtilizationAttrSRTPStreamsHighThreshold OBJECT-TYPE
+ SYNTAX Unsigned32 (0..2147483647)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "High threshold.
+Access: Instant."
+ ::= {acPMMediaChannelUtilizationAttr 9}
+
+
+
+ acPMMediaChannelUtilizationAttrSRTPStreamsLowThreshold OBJECT-TYPE
+ SYNTAX Unsigned32 (0..2147483647)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Low threshold.
+Access: Instant."
+ ::= {acPMMediaChannelUtilizationAttr 10}
+
+
+
+ acPMMediaChannelUtilizationAttrMulticastRegisChanHighThreshold OBJECT-TYPE
+ SYNTAX Unsigned32 (0..2147483647)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "High threshold.
+Access: Instant."
+ ::= {acPMMediaChannelUtilizationAttr 11}
+
+
+
+ acPMMediaChannelUtilizationAttrMulticastRegisChanLowThreshold OBJECT-TYPE
+ SYNTAX Unsigned32 (0..2147483647)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Low threshold.
+Access: Instant."
+ ::= {acPMMediaChannelUtilizationAttr 12}
+
+
+
+ acPMMediaChannelUtilizationAttrModemRelayHighThreshold OBJECT-TYPE
+ SYNTAX Unsigned32 (0..2147483647)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "High threshold.
+Access: Instant."
+ ::= {acPMMediaChannelUtilizationAttr 13}
+
+
+
+ acPMMediaChannelUtilizationAttrModemRelayLowThreshold OBJECT-TYPE
+ SYNTAX Unsigned32 (0..2147483647)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Low threshold.
+Access: Instant."
+ ::= {acPMMediaChannelUtilizationAttr 14}
+
+
+
+ acPMMediaData OBJECT IDENTIFIER ::= {acPMMedia 2}
+
+
+ acPMMediaDataAcPMMediaTimeFromStartOfInterval OBJECT-TYPE
+ SYNTAX Unsigned32 (0..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The time in seconds since the start of the current interval.
+MIB specific."
+ ::= {acPMMediaData 1}
+
+
+
+ -- ****************************************
+ -- acPMDSPUtil table declaration
+ -- ****************************************
+ acPMDSPUtilTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AcPMDSPUtilEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Number of active DSP channels."
+ ::= {acPMMediaData 21}
+
+
+
+ -- ****************************************
+ -- acPMDSPUtil table entry
+ -- ****************************************
+ acPMDSPUtilEntry OBJECT-TYPE
+ SYNTAX AcPMDSPUtilEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ ""
+ INDEX {acPMDSPUtilInterval}
+ ::= {acPMDSPUtilTable 1}
+
+
+
+ -- ****************************************
+ -- acPMDSPUtil TABLE
+ -- ****************************************
+ AcPMDSPUtilEntry ::= SEQUENCE {
+ acPMDSPUtilInterval Unsigned32,
+ acPMDSPUtilVal Gauge32,
+ acPMDSPUtilAverage Integer32,
+ acPMDSPUtilMax Integer32,
+ acPMDSPUtilMin Integer32,
+ acPMDSPUtilVolume Counter32,
+ acPMDSPUtilTimeBelowLowThreshold Integer32,
+ acPMDSPUtilTimeBetweenThresholds Integer32,
+ acPMDSPUtilTimeAboveHighThreshold Integer32,
+ acPMDSPUtilFullDayAverage Integer32
+ }
+
+
+
+ acPMDSPUtilInterval OBJECT-TYPE
+ SYNTAX Unsigned32 (0..2)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Interval index.
+0 - current period (incomplete monitoring - mid period).
+1 - Last full period.
+2 - One before last."
+ ::= {acPMDSPUtilEntry 1}
+
+
+
+ acPMDSPUtilVal OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Value of gauge or counter."
+ ::= {acPMDSPUtilEntry 2}
+
+
+
+ acPMDSPUtilAverage OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Average value with in the period time."
+ ::= {acPMDSPUtilEntry 3}
+
+
+
+ acPMDSPUtilMax OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Maximum value with in the period time."
+ ::= {acPMDSPUtilEntry 4}
+
+
+
+ acPMDSPUtilMin OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Minimum value with in the period time."
+ ::= {acPMDSPUtilEntry 5}
+
+
+
+ acPMDSPUtilVolume OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Activity volume."
+ ::= {acPMDSPUtilEntry 6}
+
+
+
+ acPMDSPUtilTimeBelowLowThreshold OBJECT-TYPE
+ SYNTAX Integer32 (-1..100)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Percent of interval time for which gauge is below what was determined
+as the low threshold."
+ ::= {acPMDSPUtilEntry 7}
+
+
+
+ acPMDSPUtilTimeBetweenThresholds OBJECT-TYPE
+ SYNTAX Integer32 (-1..100)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Percent of interval time for which gauge is above what was determined
+as the high threshold."
+ ::= {acPMDSPUtilEntry 8}
+
+
+
+ acPMDSPUtilTimeAboveHighThreshold OBJECT-TYPE
+ SYNTAX Integer32 (-1..100)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Percent of interval time for which gauge is between what were
+determined as the low and high thresholds."
+ ::= {acPMDSPUtilEntry 9}
+
+
+
+ acPMDSPUtilFullDayAverage OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The average of full 24 hours."
+ ::= {acPMDSPUtilEntry 10}
+
+
+
+ -- ****************************************
+ -- acPMChannelsPerCoder table declaration
+ -- ****************************************
+ acPMChannelsPerCoderTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AcPMChannelsPerCoderEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Number of active channels per coder. Index: 0=G711, 1=G723, 2=G728, 3=G729a, 4=G729e, 5=AMR"
+ ::= {acPMMediaData 22}
+
+
+
+ -- ****************************************
+ -- acPMChannelsPerCoder table entry
+ -- ****************************************
+ acPMChannelsPerCoderEntry OBJECT-TYPE
+ SYNTAX AcPMChannelsPerCoderEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ ""
+ INDEX {acPMChannelsPerCoderCoders,acPMChannelsPerCoderInterval}
+ ::= {acPMChannelsPerCoderTable 1}
+
+
+
+ -- ****************************************
+ -- acPMChannelsPerCoder TABLE
+ -- ****************************************
+ AcPMChannelsPerCoderEntry ::= SEQUENCE {
+ acPMChannelsPerCoderCoders INTEGER,
+ acPMChannelsPerCoderInterval Unsigned32,
+ acPMChannelsPerCoderVal Gauge32,
+ acPMChannelsPerCoderAverage Integer32,
+ acPMChannelsPerCoderMax Integer32,
+ acPMChannelsPerCoderMin Integer32,
+ acPMChannelsPerCoderVolume Counter32,
+ acPMChannelsPerCoderTimeBelowLowThreshold Integer32,
+ acPMChannelsPerCoderTimeBetweenThresholds Integer32,
+ acPMChannelsPerCoderTimeAboveHighThreshold Integer32,
+ acPMChannelsPerCoderFullDayAverage Integer32
+ }
+
+
+
+ acPMChannelsPerCoderCoders OBJECT-TYPE
+ SYNTAX INTEGER {
+ g711(0)
+,
+ g723(1)
+,
+ g728(2)
+,
+ g729a(3)
+,
+ g729e(4)
+,
+ aMR(5)
+,
+ g729EV(6)
+,
+ eg711(7)
+,
+ eVRC(8)
+,
+ unknownCoder(9)
+,
+ g726(10)
+,
+ rTA(11)
+,
+ sILK(12)
+,
+ amrWB(13)
+,
+ g722(14)
+
+ }
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Coder.
+ 0=G711, 1=G723, 2=G728, 3=G729a, 4=G729e, 5=AMR, 6=G729EV,
+7=EG711, 8=EVRC, 9=Unknown Coder, 10=G726, 11=RTA, 12=SILK,
+13=AMR WB, 14=G722."
+ ::= {acPMChannelsPerCoderEntry 1}
+
+
+
+ acPMChannelsPerCoderInterval OBJECT-TYPE
+ SYNTAX Unsigned32 (0..2)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Interval index.
+0 - current period (incomplete monitoring - mid period).
+1 - Last full period.
+2 - One before last."
+ ::= {acPMChannelsPerCoderEntry 2}
+
+
+
+ acPMChannelsPerCoderVal OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Value of gauge or counter."
+ ::= {acPMChannelsPerCoderEntry 3}
+
+
+
+ acPMChannelsPerCoderAverage OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Average value with in the period time."
+ ::= {acPMChannelsPerCoderEntry 4}
+
+
+
+ acPMChannelsPerCoderMax OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Maximum value with in the period time."
+ ::= {acPMChannelsPerCoderEntry 5}
+
+
+
+ acPMChannelsPerCoderMin OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Minimum value with in the period time."
+ ::= {acPMChannelsPerCoderEntry 6}
+
+
+
+ acPMChannelsPerCoderVolume OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Activity volume."
+ ::= {acPMChannelsPerCoderEntry 7}
+
+
+
+ acPMChannelsPerCoderTimeBelowLowThreshold OBJECT-TYPE
+ SYNTAX Integer32 (-1..100)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Percent of interval time for which gauge is below what was determined
+as the low threshold."
+ ::= {acPMChannelsPerCoderEntry 8}
+
+
+
+ acPMChannelsPerCoderTimeBetweenThresholds OBJECT-TYPE
+ SYNTAX Integer32 (-1..100)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Percent of interval time for which gauge is above what was determined
+as the high threshold."
+ ::= {acPMChannelsPerCoderEntry 9}
+
+
+
+ acPMChannelsPerCoderTimeAboveHighThreshold OBJECT-TYPE
+ SYNTAX Integer32 (-1..100)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Percent of interval time for which gauge is between what were
+determined as the low and high thresholds."
+ ::= {acPMChannelsPerCoderEntry 10}
+
+
+
+ acPMChannelsPerCoderFullDayAverage OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The average of full 24 hours."
+ ::= {acPMChannelsPerCoderEntry 11}
+
+
+
+ -- ****************************************
+ -- acPMRobustDiscard table declaration
+ -- ****************************************
+ acPMRobustDiscardTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AcPMRobustDiscardEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Number of packets discarded by the robust RTP filter."
+ ::= {acPMMediaData 23}
+
+
+
+ -- ****************************************
+ -- acPMRobustDiscard table entry
+ -- ****************************************
+ acPMRobustDiscardEntry OBJECT-TYPE
+ SYNTAX AcPMRobustDiscardEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ ""
+ INDEX {acPMRobustDiscardInterval}
+ ::= {acPMRobustDiscardTable 1}
+
+
+
+ -- ****************************************
+ -- acPMRobustDiscard TABLE
+ -- ****************************************
+ AcPMRobustDiscardEntry ::= SEQUENCE {
+ acPMRobustDiscardInterval Unsigned32,
+ acPMRobustDiscardVal Counter32
+ }
+
+
+
+ acPMRobustDiscardInterval OBJECT-TYPE
+ SYNTAX Unsigned32 (0..2)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Interval index.
+0 - current period (incomplete monitoring - mid period).
+1 - Last full period.
+2 - One before last."
+ ::= {acPMRobustDiscardEntry 1}
+
+
+
+ acPMRobustDiscardVal OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Value of gauge or counter."
+ ::= {acPMRobustDiscardEntry 2}
+
+
+
+ -- ****************************************
+ -- acPMRtcpXr table declaration
+ -- ****************************************
+ acPMRtcpXrTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AcPMRtcpXrEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "RTCP XR R-Factor"
+ ::= {acPMMediaData 24}
+
+
+
+ -- ****************************************
+ -- acPMRtcpXr table entry
+ -- ****************************************
+ acPMRtcpXrEntry OBJECT-TYPE
+ SYNTAX AcPMRtcpXrEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ ""
+ INDEX {acPMRtcpXrInterval}
+ ::= {acPMRtcpXrTable 1}
+
+
+
+ -- ****************************************
+ -- acPMRtcpXr TABLE
+ -- ****************************************
+ AcPMRtcpXrEntry ::= SEQUENCE {
+ acPMRtcpXrInterval Unsigned32,
+ acPMRtcpXrAverage Integer32,
+ acPMRtcpXrVal Integer32,
+ acPMRtcpXrMax Integer32,
+ acPMRtcpXrMin Integer32
+ }
+
+
+
+ acPMRtcpXrInterval OBJECT-TYPE
+ SYNTAX Unsigned32 (0..2)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Interval index.
+0 - current period (incomplete monitoring - mid period).
+1 - Last full period.
+2 - One before last."
+ ::= {acPMRtcpXrEntry 1}
+
+
+
+ acPMRtcpXrAverage OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Average value within the period time."
+ ::= {acPMRtcpXrEntry 2}
+
+
+
+ acPMRtcpXrVal OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Value of gauge or counter."
+ ::= {acPMRtcpXrEntry 3}
+
+
+
+ acPMRtcpXrMax OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Maximum value within the period time."
+ ::= {acPMRtcpXrEntry 4}
+
+
+
+ acPMRtcpXrMin OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Minimum value within the period time."
+ ::= {acPMRtcpXrEntry 5}
+
+
+
+ acPMMediaNetworking OBJECT IDENTIFIER ::= {acPMMediaData 31}
+
+
+ -- ****************************************
+ -- acPMPacketDelay table declaration
+ -- ****************************************
+ acPMPacketDelayTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AcPMPacketDelayEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Packet delay in RTCP data, per trunk."
+ ::= {acPMMediaNetworking 1}
+
+
+
+ -- ****************************************
+ -- acPMPacketDelay table entry
+ -- ****************************************
+ acPMPacketDelayEntry OBJECT-TYPE
+ SYNTAX AcPMPacketDelayEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ ""
+ INDEX {acPMPacketDelayTrunkNum,acPMPacketDelayInterval}
+ ::= {acPMPacketDelayTable 1}
+
+
+
+ -- ****************************************
+ -- acPMPacketDelay TABLE
+ -- ****************************************
+ AcPMPacketDelayEntry ::= SEQUENCE {
+ acPMPacketDelayTrunkNum Unsigned32,
+ acPMPacketDelayInterval Unsigned32,
+ acPMPacketDelayVal Gauge32,
+ acPMPacketDelayAverage Integer32,
+ acPMPacketDelayMax Integer32,
+ acPMPacketDelayMin Integer32,
+ acPMPacketDelayVolume Counter32,
+ acPMPacketDelayTimeBelowLowThreshold Integer32,
+ acPMPacketDelayTimeBetweenThresholds Integer32,
+ acPMPacketDelayTimeAboveHighThreshold Integer32,
+ acPMPacketDelayFullDayAverage Integer32
+ }
+
+
+
+ acPMPacketDelayTrunkNum OBJECT-TYPE
+ SYNTAX Unsigned32 (0..83)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Trunk number.
+0 is the first trunk."
+ ::= {acPMPacketDelayEntry 1}
+
+
+
+ acPMPacketDelayInterval OBJECT-TYPE
+ SYNTAX Unsigned32 (0..2)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Interval index.
+0 - current period (incomplete monitoring - mid period).
+1 - Last full period.
+2 - One before last."
+ ::= {acPMPacketDelayEntry 2}
+
+
+
+ acPMPacketDelayVal OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Value of gauge or counter."
+ ::= {acPMPacketDelayEntry 3}
+
+
+
+ acPMPacketDelayAverage OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Average value with in the period time."
+ ::= {acPMPacketDelayEntry 4}
+
+
+
+ acPMPacketDelayMax OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Maximum value with in the period time."
+ ::= {acPMPacketDelayEntry 5}
+
+
+
+ acPMPacketDelayMin OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Minimum value with in the period time."
+ ::= {acPMPacketDelayEntry 6}
+
+
+
+ acPMPacketDelayVolume OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Activity volume."
+ ::= {acPMPacketDelayEntry 7}
+
+
+
+ acPMPacketDelayTimeBelowLowThreshold OBJECT-TYPE
+ SYNTAX Integer32 (-1..100)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Percent of interval time for which gauge is below what was determined
+as the low threshold."
+ ::= {acPMPacketDelayEntry 8}
+
+
+
+ acPMPacketDelayTimeBetweenThresholds OBJECT-TYPE
+ SYNTAX Integer32 (-1..100)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Percent of interval time for which gauge is above what was determined
+as the high threshold."
+ ::= {acPMPacketDelayEntry 9}
+
+
+
+ acPMPacketDelayTimeAboveHighThreshold OBJECT-TYPE
+ SYNTAX Integer32 (-1..100)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Percent of interval time for which gauge is between what were
+determined as the low and high thresholds."
+ ::= {acPMPacketDelayEntry 10}
+
+
+
+ acPMPacketDelayFullDayAverage OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The average of full 24 hours."
+ ::= {acPMPacketDelayEntry 11}
+
+
+
+ -- ****************************************
+ -- acPMPacketJitter table declaration
+ -- ****************************************
+ acPMPacketJitterTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AcPMPacketJitterEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Packet jitter in RTCP data, per trunk."
+ ::= {acPMMediaNetworking 2}
+
+
+
+ -- ****************************************
+ -- acPMPacketJitter table entry
+ -- ****************************************
+ acPMPacketJitterEntry OBJECT-TYPE
+ SYNTAX AcPMPacketJitterEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ ""
+ INDEX {acPMPacketJitterTrunkNum,acPMPacketJitterInterval}
+ ::= {acPMPacketJitterTable 1}
+
+
+
+ -- ****************************************
+ -- acPMPacketJitter TABLE
+ -- ****************************************
+ AcPMPacketJitterEntry ::= SEQUENCE {
+ acPMPacketJitterTrunkNum Unsigned32,
+ acPMPacketJitterInterval Unsigned32,
+ acPMPacketJitterVal Gauge32,
+ acPMPacketJitterAverage Integer32,
+ acPMPacketJitterMax Integer32,
+ acPMPacketJitterMin Integer32,
+ acPMPacketJitterVolume Counter32,
+ acPMPacketJitterTimeBelowLowThreshold Integer32,
+ acPMPacketJitterTimeBetweenThresholds Integer32,
+ acPMPacketJitterTimeAboveHighThreshold Integer32,
+ acPMPacketJitterFullDayAverage Integer32
+ }
+
+
+
+ acPMPacketJitterTrunkNum OBJECT-TYPE
+ SYNTAX Unsigned32 (0..83)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Trunk number.
+0 is the first trunk."
+ ::= {acPMPacketJitterEntry 1}
+
+
+
+ acPMPacketJitterInterval OBJECT-TYPE
+ SYNTAX Unsigned32 (0..2)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Interval index.
+0 - current period (incomplete monitoring - mid period).
+1 - Last full period.
+2 - One before last."
+ ::= {acPMPacketJitterEntry 2}
+
+
+
+ acPMPacketJitterVal OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Value of gauge or counter."
+ ::= {acPMPacketJitterEntry 3}
+
+
+
+ acPMPacketJitterAverage OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Average value with in the period time."
+ ::= {acPMPacketJitterEntry 4}
+
+
+
+ acPMPacketJitterMax OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Maximum value with in the period time."
+ ::= {acPMPacketJitterEntry 5}
+
+
+
+ acPMPacketJitterMin OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Minimum value with in the period time."
+ ::= {acPMPacketJitterEntry 6}
+
+
+
+ acPMPacketJitterVolume OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Activity volume."
+ ::= {acPMPacketJitterEntry 7}
+
+
+
+ acPMPacketJitterTimeBelowLowThreshold OBJECT-TYPE
+ SYNTAX Integer32 (-1..100)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Percent of interval time for which gauge is below what was determined
+as the low threshold."
+ ::= {acPMPacketJitterEntry 8}
+
+
+
+ acPMPacketJitterTimeBetweenThresholds OBJECT-TYPE
+ SYNTAX Integer32 (-1..100)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Percent of interval time for which gauge is above what was determined
+as the high threshold."
+ ::= {acPMPacketJitterEntry 9}
+
+
+
+ acPMPacketJitterTimeAboveHighThreshold OBJECT-TYPE
+ SYNTAX Integer32 (-1..100)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Percent of interval time for which gauge is between what were
+determined as the low and high thresholds."
+ ::= {acPMPacketJitterEntry 10}
+
+
+
+ acPMPacketJitterFullDayAverage OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The average of full 24 hours."
+ ::= {acPMPacketJitterEntry 11}
+
+
+
+ -- ****************************************
+ -- acPMRTPBytesTx table declaration
+ -- ****************************************
+ acPMRTPBytesTxTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AcPMRTPBytesTxEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "RTP bytes sent in RTCP data, per trunk."
+ ::= {acPMMediaNetworking 3}
+
+
+
+ -- ****************************************
+ -- acPMRTPBytesTx table entry
+ -- ****************************************
+ acPMRTPBytesTxEntry OBJECT-TYPE
+ SYNTAX AcPMRTPBytesTxEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ ""
+ INDEX {acPMRTPBytesTxTrunkNum,acPMRTPBytesTxInterval}
+ ::= {acPMRTPBytesTxTable 1}
+
+
+
+ -- ****************************************
+ -- acPMRTPBytesTx TABLE
+ -- ****************************************
+ AcPMRTPBytesTxEntry ::= SEQUENCE {
+ acPMRTPBytesTxTrunkNum Unsigned32,
+ acPMRTPBytesTxInterval Unsigned32,
+ acPMRTPBytesTxVal Gauge32,
+ acPMRTPBytesTxAverage Integer32,
+ acPMRTPBytesTxMax Integer32,
+ acPMRTPBytesTxMin Integer32,
+ acPMRTPBytesTxVolume Counter32,
+ acPMRTPBytesTxTimeBelowLowThreshold Integer32,
+ acPMRTPBytesTxTimeBetweenThresholds Integer32,
+ acPMRTPBytesTxTimeAboveHighThreshold Integer32,
+ acPMRTPBytesTxFullDayAverage Integer32
+ }
+
+
+
+ acPMRTPBytesTxTrunkNum OBJECT-TYPE
+ SYNTAX Unsigned32 (0..83)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Trunk number.
+0 is the first trunk."
+ ::= {acPMRTPBytesTxEntry 1}
+
+
+
+ acPMRTPBytesTxInterval OBJECT-TYPE
+ SYNTAX Unsigned32 (0..2)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Interval index.
+0 - current period (incomplete monitoring - mid period).
+1 - Last full period.
+2 - One before last."
+ ::= {acPMRTPBytesTxEntry 2}
+
+
+
+ acPMRTPBytesTxVal OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Value of gauge or counter."
+ ::= {acPMRTPBytesTxEntry 3}
+
+
+
+ acPMRTPBytesTxAverage OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Average value with in the period time."
+ ::= {acPMRTPBytesTxEntry 4}
+
+
+
+ acPMRTPBytesTxMax OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Maximum value with in the period time."
+ ::= {acPMRTPBytesTxEntry 5}
+
+
+
+ acPMRTPBytesTxMin OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Minimum value with in the period time."
+ ::= {acPMRTPBytesTxEntry 6}
+
+
+
+ acPMRTPBytesTxVolume OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Activity volume."
+ ::= {acPMRTPBytesTxEntry 7}
+
+
+
+ acPMRTPBytesTxTimeBelowLowThreshold OBJECT-TYPE
+ SYNTAX Integer32 (-1..100)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Percent of interval time for which counter is below what was
+determined as the low threshold."
+ ::= {acPMRTPBytesTxEntry 8}
+
+
+
+ acPMRTPBytesTxTimeBetweenThresholds OBJECT-TYPE
+ SYNTAX Integer32 (-1..100)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Percent of interval time for which counter is above what was
+determined as the high threshold."
+ ::= {acPMRTPBytesTxEntry 9}
+
+
+
+ acPMRTPBytesTxTimeAboveHighThreshold OBJECT-TYPE
+ SYNTAX Integer32 (-1..100)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Percent of interval time for which counter is between what were
+determined as the low and high thresholds."
+ ::= {acPMRTPBytesTxEntry 10}
+
+
+
+ acPMRTPBytesTxFullDayAverage OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The average of full 24 hours."
+ ::= {acPMRTPBytesTxEntry 11}
+
+
+
+ -- ****************************************
+ -- acPMRTPBytesRx table declaration
+ -- ****************************************
+ acPMRTPBytesRxTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AcPMRTPBytesRxEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "RTP bytes received in RTCP data, per trunk."
+ ::= {acPMMediaNetworking 4}
+
+
+
+ -- ****************************************
+ -- acPMRTPBytesRx table entry
+ -- ****************************************
+ acPMRTPBytesRxEntry OBJECT-TYPE
+ SYNTAX AcPMRTPBytesRxEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ ""
+ INDEX {acPMRTPBytesRxTrunkNum,acPMRTPBytesRxInterval}
+ ::= {acPMRTPBytesRxTable 1}
+
+
+
+ -- ****************************************
+ -- acPMRTPBytesRx TABLE
+ -- ****************************************
+ AcPMRTPBytesRxEntry ::= SEQUENCE {
+ acPMRTPBytesRxTrunkNum Unsigned32,
+ acPMRTPBytesRxInterval Unsigned32,
+ acPMRTPBytesRxVal Gauge32,
+ acPMRTPBytesRxAverage Integer32,
+ acPMRTPBytesRxMax Integer32,
+ acPMRTPBytesRxMin Integer32,
+ acPMRTPBytesRxVolume Counter32,
+ acPMRTPBytesRxTimeBelowLowThreshold Integer32,
+ acPMRTPBytesRxTimeBetweenThresholds Integer32,
+ acPMRTPBytesRxTimeAboveHighThreshold Integer32,
+ acPMRTPBytesRxFullDayAverage Integer32
+ }
+
+
+
+ acPMRTPBytesRxTrunkNum OBJECT-TYPE
+ SYNTAX Unsigned32 (0..83)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Trunk number.
+0 is the first trunk."
+ ::= {acPMRTPBytesRxEntry 1}
+
+
+
+ acPMRTPBytesRxInterval OBJECT-TYPE
+ SYNTAX Unsigned32 (0..2)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Interval index.
+0 - current period (incomplete monitoring - mid period).
+1 - Last full period.
+2 - One before last."
+ ::= {acPMRTPBytesRxEntry 2}
+
+
+
+ acPMRTPBytesRxVal OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Value of gauge or counter."
+ ::= {acPMRTPBytesRxEntry 3}
+
+
+
+ acPMRTPBytesRxAverage OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Average value with in the period time."
+ ::= {acPMRTPBytesRxEntry 4}
+
+
+
+ acPMRTPBytesRxMax OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Maximum value with in the period time."
+ ::= {acPMRTPBytesRxEntry 5}
+
+
+
+ acPMRTPBytesRxMin OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Minimum value with in the period time."
+ ::= {acPMRTPBytesRxEntry 6}
+
+
+
+ acPMRTPBytesRxVolume OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Activity volume."
+ ::= {acPMRTPBytesRxEntry 7}
+
+
+
+ acPMRTPBytesRxTimeBelowLowThreshold OBJECT-TYPE
+ SYNTAX Integer32 (-1..100)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Percent of interval time for which counter is below what was
+determined as the low threshold."
+ ::= {acPMRTPBytesRxEntry 8}
+
+
+
+ acPMRTPBytesRxTimeBetweenThresholds OBJECT-TYPE
+ SYNTAX Integer32 (-1..100)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Percent of interval time for which counter is above what was
+determined as the high threshold."
+ ::= {acPMRTPBytesRxEntry 9}
+
+
+
+ acPMRTPBytesRxTimeAboveHighThreshold OBJECT-TYPE
+ SYNTAX Integer32 (-1..100)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Percent of interval time for which counter is between what were
+determined as the low and high thresholds."
+ ::= {acPMRTPBytesRxEntry 10}
+
+
+
+ acPMRTPBytesRxFullDayAverage OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The average of full 24 hours."
+ ::= {acPMRTPBytesRxEntry 11}
+
+
+
+ -- ****************************************
+ -- acPMRTPPacketsTx table declaration
+ -- ****************************************
+ acPMRTPPacketsTxTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AcPMRTPPacketsTxEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "RTP packets sent in RTCP data, per trunk."
+ ::= {acPMMediaNetworking 5}
+
+
+
+ -- ****************************************
+ -- acPMRTPPacketsTx table entry
+ -- ****************************************
+ acPMRTPPacketsTxEntry OBJECT-TYPE
+ SYNTAX AcPMRTPPacketsTxEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ ""
+ INDEX {acPMRTPPacketsTxTrunkNum,acPMRTPPacketsTxInterval}
+ ::= {acPMRTPPacketsTxTable 1}
+
+
+
+ -- ****************************************
+ -- acPMRTPPacketsTx TABLE
+ -- ****************************************
+ AcPMRTPPacketsTxEntry ::= SEQUENCE {
+ acPMRTPPacketsTxTrunkNum Unsigned32,
+ acPMRTPPacketsTxInterval Unsigned32,
+ acPMRTPPacketsTxVal Gauge32,
+ acPMRTPPacketsTxAverage Integer32,
+ acPMRTPPacketsTxMax Integer32,
+ acPMRTPPacketsTxMin Integer32,
+ acPMRTPPacketsTxVolume Counter32,
+ acPMRTPPacketsTxTimeBelowLowThreshold Integer32,
+ acPMRTPPacketsTxTimeBetweenThresholds Integer32,
+ acPMRTPPacketsTxTimeAboveHighThreshold Integer32,
+ acPMRTPPacketsTxFullDayAverage Integer32,
+ acPMRTPPacketsTxTotal Integer32
+ }
+
+
+
+ acPMRTPPacketsTxTrunkNum OBJECT-TYPE
+ SYNTAX Unsigned32 (0..83)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Trunk number.
+0 is the first trunk."
+ ::= {acPMRTPPacketsTxEntry 1}
+
+
+
+ acPMRTPPacketsTxInterval OBJECT-TYPE
+ SYNTAX Unsigned32 (0..2)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Interval index.
+0 - current period (incomplete monitoring - mid period).
+1 - Last full period.
+2 - One before last."
+ ::= {acPMRTPPacketsTxEntry 2}
+
+
+
+ acPMRTPPacketsTxVal OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Value of gauge or counter."
+ ::= {acPMRTPPacketsTxEntry 3}
+
+
+
+ acPMRTPPacketsTxAverage OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Average value with in the period time."
+ ::= {acPMRTPPacketsTxEntry 4}
+
+
+
+ acPMRTPPacketsTxMax OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Maximum value with in the period time."
+ ::= {acPMRTPPacketsTxEntry 5}
+
+
+
+ acPMRTPPacketsTxMin OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Minimum value with in the period time."
+ ::= {acPMRTPPacketsTxEntry 6}
+
+
+
+ acPMRTPPacketsTxVolume OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Activity volume."
+ ::= {acPMRTPPacketsTxEntry 7}
+
+
+
+ acPMRTPPacketsTxTimeBelowLowThreshold OBJECT-TYPE
+ SYNTAX Integer32 (-1..100)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Percent of interval time for which counter is below what was
+determined as the low threshold."
+ ::= {acPMRTPPacketsTxEntry 8}
+
+
+
+ acPMRTPPacketsTxTimeBetweenThresholds OBJECT-TYPE
+ SYNTAX Integer32 (-1..100)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Percent of interval time for which counter is above what was
+determined as the high threshold."
+ ::= {acPMRTPPacketsTxEntry 9}
+
+
+
+ acPMRTPPacketsTxTimeAboveHighThreshold OBJECT-TYPE
+ SYNTAX Integer32 (-1..100)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Percent of interval time for which counter is between what were
+determined as the low and high thresholds."
+ ::= {acPMRTPPacketsTxEntry 10}
+
+
+
+ acPMRTPPacketsTxFullDayAverage OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The average of full 24 hours."
+ ::= {acPMRTPPacketsTxEntry 11}
+
+
+
+ acPMRTPPacketsTxTotal OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Total since last reset."
+ ::= {acPMRTPPacketsTxEntry 12}
+
+
+
+ -- ****************************************
+ -- acPMRTPPacketsRx table declaration
+ -- ****************************************
+ acPMRTPPacketsRxTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AcPMRTPPacketsRxEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "RTP packets received in RTCP data, per trunk."
+ ::= {acPMMediaNetworking 6}
+
+
+
+ -- ****************************************
+ -- acPMRTPPacketsRx table entry
+ -- ****************************************
+ acPMRTPPacketsRxEntry OBJECT-TYPE
+ SYNTAX AcPMRTPPacketsRxEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ ""
+ INDEX {acPMRTPPacketsRxTrunkNum,acPMRTPPacketsRxInterval}
+ ::= {acPMRTPPacketsRxTable 1}
+
+
+
+ -- ****************************************
+ -- acPMRTPPacketsRx TABLE
+ -- ****************************************
+ AcPMRTPPacketsRxEntry ::= SEQUENCE {
+ acPMRTPPacketsRxTrunkNum Unsigned32,
+ acPMRTPPacketsRxInterval Unsigned32,
+ acPMRTPPacketsRxVal Gauge32,
+ acPMRTPPacketsRxAverage Integer32,
+ acPMRTPPacketsRxMax Integer32,
+ acPMRTPPacketsRxMin Integer32,
+ acPMRTPPacketsRxVolume Counter32,
+ acPMRTPPacketsRxTimeBelowLowThreshold Integer32,
+ acPMRTPPacketsRxTimeBetweenThresholds Integer32,
+ acPMRTPPacketsRxTimeAboveHighThreshold Integer32,
+ acPMRTPPacketsRxFullDayAverage Integer32,
+ acPMRTPPacketsRxTotal Integer32
+ }
+
+
+
+ acPMRTPPacketsRxTrunkNum OBJECT-TYPE
+ SYNTAX Unsigned32 (0..83)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Trunk number.
+0 is the first trunk."
+ ::= {acPMRTPPacketsRxEntry 1}
+
+
+
+ acPMRTPPacketsRxInterval OBJECT-TYPE
+ SYNTAX Unsigned32 (0..2)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Interval index.
+0 - current period (incomplete monitoring - mid period).
+1 - Last full period.
+2 - One before last."
+ ::= {acPMRTPPacketsRxEntry 2}
+
+
+
+ acPMRTPPacketsRxVal OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Value of gauge or counter."
+ ::= {acPMRTPPacketsRxEntry 3}
+
+
+
+ acPMRTPPacketsRxAverage OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Average value with in the period time."
+ ::= {acPMRTPPacketsRxEntry 4}
+
+
+
+ acPMRTPPacketsRxMax OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Maximum value with in the period time."
+ ::= {acPMRTPPacketsRxEntry 5}
+
+
+
+ acPMRTPPacketsRxMin OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Minimum value with in the period time."
+ ::= {acPMRTPPacketsRxEntry 6}
+
+
+
+ acPMRTPPacketsRxVolume OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Activity volume."
+ ::= {acPMRTPPacketsRxEntry 7}
+
+
+
+ acPMRTPPacketsRxTimeBelowLowThreshold OBJECT-TYPE
+ SYNTAX Integer32 (-1..100)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Percent of interval time for which counter is below what was
+determined as the low threshold."
+ ::= {acPMRTPPacketsRxEntry 8}
+
+
+
+ acPMRTPPacketsRxTimeBetweenThresholds OBJECT-TYPE
+ SYNTAX Integer32 (-1..100)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Percent of interval time for which counter is above what was
+determined as the high threshold."
+ ::= {acPMRTPPacketsRxEntry 9}
+
+
+
+ acPMRTPPacketsRxTimeAboveHighThreshold OBJECT-TYPE
+ SYNTAX Integer32 (-1..100)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Percent of interval time for which counter is between what were
+determined as the low and high thresholds."
+ ::= {acPMRTPPacketsRxEntry 10}
+
+
+
+ acPMRTPPacketsRxFullDayAverage OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The average of full 24 hours."
+ ::= {acPMRTPPacketsRxEntry 11}
+
+
+
+ acPMRTPPacketsRxTotal OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Total since last reset."
+ ::= {acPMRTPPacketsRxEntry 12}
+
+
+
+ -- ****************************************
+ -- acPMRTPPacketLossRx table declaration
+ -- ****************************************
+ acPMRTPPacketLossRxTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AcPMRTPPacketLossRxEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "RTP packet loss reported in outgoing RTCP data, per trunk."
+ ::= {acPMMediaNetworking 7}
+
+
+
+ -- ****************************************
+ -- acPMRTPPacketLossRx table entry
+ -- ****************************************
+ acPMRTPPacketLossRxEntry OBJECT-TYPE
+ SYNTAX AcPMRTPPacketLossRxEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ ""
+ INDEX {acPMRTPPacketLossRxTrunkNum,acPMRTPPacketLossRxInterval}
+ ::= {acPMRTPPacketLossRxTable 1}
+
+
+
+ -- ****************************************
+ -- acPMRTPPacketLossRx TABLE
+ -- ****************************************
+ AcPMRTPPacketLossRxEntry ::= SEQUENCE {
+ acPMRTPPacketLossRxTrunkNum Unsigned32,
+ acPMRTPPacketLossRxInterval Unsigned32,
+ acPMRTPPacketLossRxVal Gauge32,
+ acPMRTPPacketLossRxAverage Integer32,
+ acPMRTPPacketLossRxMax Integer32,
+ acPMRTPPacketLossRxMin Integer32,
+ acPMRTPPacketLossRxVolume Counter32,
+ acPMRTPPacketLossRxTimeBelowLowThreshold Integer32,
+ acPMRTPPacketLossRxTimeBetweenThresholds Integer32,
+ acPMRTPPacketLossRxTimeAboveHighThreshold Integer32,
+ acPMRTPPacketLossRxFullDayAverage Integer32
+ }
+
+
+
+ acPMRTPPacketLossRxTrunkNum OBJECT-TYPE
+ SYNTAX Unsigned32 (0..83)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Trunk number.
+0 is the first trunk."
+ ::= {acPMRTPPacketLossRxEntry 1}
+
+
+
+ acPMRTPPacketLossRxInterval OBJECT-TYPE
+ SYNTAX Unsigned32 (0..2)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Interval index.
+0 - current period (incomplete monitoring - mid period).
+1 - Last full period.
+2 - One before last."
+ ::= {acPMRTPPacketLossRxEntry 2}
+
+
+
+ acPMRTPPacketLossRxVal OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Value of gauge or counter."
+ ::= {acPMRTPPacketLossRxEntry 3}
+
+
+
+ acPMRTPPacketLossRxAverage OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Average value with in the period time."
+ ::= {acPMRTPPacketLossRxEntry 4}
+
+
+
+ acPMRTPPacketLossRxMax OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Maximum value with in the period time."
+ ::= {acPMRTPPacketLossRxEntry 5}
+
+
+
+ acPMRTPPacketLossRxMin OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Minimum value with in the period time."
+ ::= {acPMRTPPacketLossRxEntry 6}
+
+
+
+ acPMRTPPacketLossRxVolume OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Activity volume."
+ ::= {acPMRTPPacketLossRxEntry 7}
+
+
+
+ acPMRTPPacketLossRxTimeBelowLowThreshold OBJECT-TYPE
+ SYNTAX Integer32 (-1..100)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Percent of interval time for which gauge is below what was determined
+as the low threshold."
+ ::= {acPMRTPPacketLossRxEntry 8}
+
+
+
+ acPMRTPPacketLossRxTimeBetweenThresholds OBJECT-TYPE
+ SYNTAX Integer32 (-1..100)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Percent of interval time for which gauge is above what was determined
+as the high threshold."
+ ::= {acPMRTPPacketLossRxEntry 9}
+
+
+
+ acPMRTPPacketLossRxTimeAboveHighThreshold OBJECT-TYPE
+ SYNTAX Integer32 (-1..100)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Percent of interval time for which gauge is between what were
+determined as the low and high thresholds."
+ ::= {acPMRTPPacketLossRxEntry 10}
+
+
+
+ acPMRTPPacketLossRxFullDayAverage OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The average of full 24 hours."
+ ::= {acPMRTPPacketLossRxEntry 11}
+
+
+
+ -- ****************************************
+ -- acPMRTPPacketLossTx table declaration
+ -- ****************************************
+ acPMRTPPacketLossTxTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AcPMRTPPacketLossTxEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "RTP packet loss reported in incoming RTCP data, per trunk."
+ ::= {acPMMediaNetworking 8}
+
+
+
+ -- ****************************************
+ -- acPMRTPPacketLossTx table entry
+ -- ****************************************
+ acPMRTPPacketLossTxEntry OBJECT-TYPE
+ SYNTAX AcPMRTPPacketLossTxEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ ""
+ INDEX {acPMRTPPacketLossTxTrunkNum,acPMRTPPacketLossTxInterval}
+ ::= {acPMRTPPacketLossTxTable 1}
+
+
+
+ -- ****************************************
+ -- acPMRTPPacketLossTx TABLE
+ -- ****************************************
+ AcPMRTPPacketLossTxEntry ::= SEQUENCE {
+ acPMRTPPacketLossTxTrunkNum Unsigned32,
+ acPMRTPPacketLossTxInterval Unsigned32,
+ acPMRTPPacketLossTxVal Gauge32,
+ acPMRTPPacketLossTxAverage Integer32,
+ acPMRTPPacketLossTxMax Integer32,
+ acPMRTPPacketLossTxMin Integer32,
+ acPMRTPPacketLossTxVolume Counter32,
+ acPMRTPPacketLossTxTimeBelowLowThreshold Integer32,
+ acPMRTPPacketLossTxTimeBetweenThresholds Integer32,
+ acPMRTPPacketLossTxTimeAboveHighThreshold Integer32,
+ acPMRTPPacketLossTxFullDayAverage Integer32
+ }
+
+
+
+ acPMRTPPacketLossTxTrunkNum OBJECT-TYPE
+ SYNTAX Unsigned32 (0..83)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Trunk number.
+0 is the first trunk."
+ ::= {acPMRTPPacketLossTxEntry 1}
+
+
+
+ acPMRTPPacketLossTxInterval OBJECT-TYPE
+ SYNTAX Unsigned32 (0..2)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Interval index.
+0 - current period (incomplete monitoring - mid period).
+1 - Last full period.
+2 - One before last."
+ ::= {acPMRTPPacketLossTxEntry 2}
+
+
+
+ acPMRTPPacketLossTxVal OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Value of gauge or counter."
+ ::= {acPMRTPPacketLossTxEntry 3}
+
+
+
+ acPMRTPPacketLossTxAverage OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Average value with in the period time."
+ ::= {acPMRTPPacketLossTxEntry 4}
+
+
+
+ acPMRTPPacketLossTxMax OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Maximum value with in the period time."
+ ::= {acPMRTPPacketLossTxEntry 5}
+
+
+
+ acPMRTPPacketLossTxMin OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Minimum value with in the period time."
+ ::= {acPMRTPPacketLossTxEntry 6}
+
+
+
+ acPMRTPPacketLossTxVolume OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Activity volume."
+ ::= {acPMRTPPacketLossTxEntry 7}
+
+
+
+ acPMRTPPacketLossTxTimeBelowLowThreshold OBJECT-TYPE
+ SYNTAX Integer32 (-1..100)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Percent of interval time for which gauge is below what was determined
+as the low threshold."
+ ::= {acPMRTPPacketLossTxEntry 8}
+
+
+
+ acPMRTPPacketLossTxTimeBetweenThresholds OBJECT-TYPE
+ SYNTAX Integer32 (-1..100)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Percent of interval time for which gauge is above what was determined
+as the high threshold."
+ ::= {acPMRTPPacketLossTxEntry 9}
+
+
+
+ acPMRTPPacketLossTxTimeAboveHighThreshold OBJECT-TYPE
+ SYNTAX Integer32 (-1..100)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Percent of interval time for which gauge is between what were
+determined as the low and high thresholds."
+ ::= {acPMRTPPacketLossTxEntry 10}
+
+
+
+ acPMRTPPacketLossTxFullDayAverage OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The average of full 24 hours."
+ ::= {acPMRTPPacketLossTxEntry 11}
+
+
+
+ -- ****************************************
+ -- acPMModuleRTPPacketLossRx table declaration
+ -- ****************************************
+ acPMModuleRTPPacketLossRxTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AcPMModuleRTPPacketLossRxEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "RTP packet loss reported in incoming RTCP data, per entire module."
+ ::= {acPMMediaNetworking 9}
+
+
+
+ -- ****************************************
+ -- acPMModuleRTPPacketLossRx table entry
+ -- ****************************************
+ acPMModuleRTPPacketLossRxEntry OBJECT-TYPE
+ SYNTAX AcPMModuleRTPPacketLossRxEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ ""
+ INDEX {acPMModuleRTPPacketLossRxInterval}
+ ::= {acPMModuleRTPPacketLossRxTable 1}
+
+
+
+ -- ****************************************
+ -- acPMModuleRTPPacketLossRx TABLE
+ -- ****************************************
+ AcPMModuleRTPPacketLossRxEntry ::= SEQUENCE {
+ acPMModuleRTPPacketLossRxInterval Unsigned32,
+ acPMModuleRTPPacketLossRxAverage Integer32,
+ acPMModuleRTPPacketLossRxMax Integer32,
+ acPMModuleRTPPacketLossRxMin Integer32,
+ acPMModuleRTPPacketLossRxVolume Counter32,
+ acPMModuleRTPPacketLossRxTimeBelowLowThreshold Integer32,
+ acPMModuleRTPPacketLossRxTimeBetweenThresholds Integer32,
+ acPMModuleRTPPacketLossRxTimeAboveHighThreshold Integer32,
+ acPMModuleRTPPacketLossRxFullDayAverage Integer32,
+ acPMModuleRTPPacketLossRxTotal Integer32
+ }
+
+
+
+ acPMModuleRTPPacketLossRxInterval OBJECT-TYPE
+ SYNTAX Unsigned32 (0..2)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Interval index.
+0 - current period (incomplete monitoring - mid period).
+1 - Last full period.
+2 - One before last."
+ ::= {acPMModuleRTPPacketLossRxEntry 1}
+
+
+
+ acPMModuleRTPPacketLossRxAverage OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Average value with in the period time."
+ ::= {acPMModuleRTPPacketLossRxEntry 2}
+
+
+
+ acPMModuleRTPPacketLossRxMax OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Maximum value with in the period time."
+ ::= {acPMModuleRTPPacketLossRxEntry 3}
+
+
+
+ acPMModuleRTPPacketLossRxMin OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Minimum value with in the period time."
+ ::= {acPMModuleRTPPacketLossRxEntry 4}
+
+
+
+ acPMModuleRTPPacketLossRxVolume OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Activity volume."
+ ::= {acPMModuleRTPPacketLossRxEntry 5}
+
+
+
+ acPMModuleRTPPacketLossRxTimeBelowLowThreshold OBJECT-TYPE
+ SYNTAX Integer32 (-1..100)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Percent of interval time for which gauge is below what was determined
+as the low threshold."
+ ::= {acPMModuleRTPPacketLossRxEntry 6}
+
+
+
+ acPMModuleRTPPacketLossRxTimeBetweenThresholds OBJECT-TYPE
+ SYNTAX Integer32 (-1..100)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Percent of interval time for which gauge is above what was determined
+as the high threshold."
+ ::= {acPMModuleRTPPacketLossRxEntry 7}
+
+
+
+ acPMModuleRTPPacketLossRxTimeAboveHighThreshold OBJECT-TYPE
+ SYNTAX Integer32 (-1..100)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Percent of interval time for which gauge is between what were
+determined as the low and high thresholds."
+ ::= {acPMModuleRTPPacketLossRxEntry 8}
+
+
+
+ acPMModuleRTPPacketLossRxFullDayAverage OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The average of full 24 hours."
+ ::= {acPMModuleRTPPacketLossRxEntry 9}
+
+
+
+ acPMModuleRTPPacketLossRxTotal OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Total since last reset."
+ ::= {acPMModuleRTPPacketLossRxEntry 10}
+
+
+
+ -- ****************************************
+ -- acPMModuleRTPPacketLossTx table declaration
+ -- ****************************************
+ acPMModuleRTPPacketLossTxTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AcPMModuleRTPPacketLossTxEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "RTP packet loss reported in outging RTCP data, per entire module."
+ ::= {acPMMediaNetworking 10}
+
+
+
+ -- ****************************************
+ -- acPMModuleRTPPacketLossTx table entry
+ -- ****************************************
+ acPMModuleRTPPacketLossTxEntry OBJECT-TYPE
+ SYNTAX AcPMModuleRTPPacketLossTxEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ ""
+ INDEX {acPMModuleRTPPacketLossTxInterval}
+ ::= {acPMModuleRTPPacketLossTxTable 1}
+
+
+
+ -- ****************************************
+ -- acPMModuleRTPPacketLossTx TABLE
+ -- ****************************************
+ AcPMModuleRTPPacketLossTxEntry ::= SEQUENCE {
+ acPMModuleRTPPacketLossTxInterval Unsigned32,
+ acPMModuleRTPPacketLossTxAverage Integer32,
+ acPMModuleRTPPacketLossTxMax Integer32,
+ acPMModuleRTPPacketLossTxMin Integer32,
+ acPMModuleRTPPacketLossTxVolume Counter32,
+ acPMModuleRTPPacketLossTxTimeBelowLowThreshold Integer32,
+ acPMModuleRTPPacketLossTxTimeBetweenThresholds Integer32,
+ acPMModuleRTPPacketLossTxTimeAboveHighThreshold Integer32,
+ acPMModuleRTPPacketLossTxFullDayAverage Integer32,
+ acPMModuleRTPPacketLossTxTotal Integer32
+ }
+
+
+
+ acPMModuleRTPPacketLossTxInterval OBJECT-TYPE
+ SYNTAX Unsigned32 (0..2)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Interval index.
+0 - current period (incomplete monitoring - mid period).
+1 - Last full period.
+2 - One before last."
+ ::= {acPMModuleRTPPacketLossTxEntry 1}
+
+
+
+ acPMModuleRTPPacketLossTxAverage OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Average value with in the period time."
+ ::= {acPMModuleRTPPacketLossTxEntry 2}
+
+
+
+ acPMModuleRTPPacketLossTxMax OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Maximum value with in the period time."
+ ::= {acPMModuleRTPPacketLossTxEntry 3}
+
+
+
+ acPMModuleRTPPacketLossTxMin OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Minimum value with in the period time."
+ ::= {acPMModuleRTPPacketLossTxEntry 4}
+
+
+
+ acPMModuleRTPPacketLossTxVolume OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Activity volume."
+ ::= {acPMModuleRTPPacketLossTxEntry 5}
+
+
+
+ acPMModuleRTPPacketLossTxTimeBelowLowThreshold OBJECT-TYPE
+ SYNTAX Integer32 (-1..100)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Percent of interval time for which gauge is below what was determined
+as the low threshold."
+ ::= {acPMModuleRTPPacketLossTxEntry 6}
+
+
+
+ acPMModuleRTPPacketLossTxTimeBetweenThresholds OBJECT-TYPE
+ SYNTAX Integer32 (-1..100)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Percent of interval time for which gauge is above what was determined
+as the high threshold."
+ ::= {acPMModuleRTPPacketLossTxEntry 7}
+
+
+
+ acPMModuleRTPPacketLossTxTimeAboveHighThreshold OBJECT-TYPE
+ SYNTAX Integer32 (-1..100)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Percent of interval time for which gauge is between what were
+determined as the low and high thresholds."
+ ::= {acPMModuleRTPPacketLossTxEntry 8}
+
+
+
+ acPMModuleRTPPacketLossTxFullDayAverage OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The average of full 24 hours."
+ ::= {acPMModuleRTPPacketLossTxEntry 9}
+
+
+
+ acPMModuleRTPPacketLossTxTotal OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Total since last reset."
+ ::= {acPMModuleRTPPacketLossTxEntry 10}
+
+
+
+ acPMMediaNetworkingAggregated OBJECT IDENTIFIER ::= {acPMMediaNetworking 21}
+
+
+ -- ****************************************
+ -- acPMModulePacketDelay table declaration
+ -- ****************************************
+ acPMModulePacketDelayTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AcPMModulePacketDelayEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Packet delay in RTCP data. This counter is collected for the entire TPM module, and includes TDM-IP and IP-IP calls."
+ ::= {acPMMediaNetworkingAggregated 1}
+
+
+
+ -- ****************************************
+ -- acPMModulePacketDelay table entry
+ -- ****************************************
+ acPMModulePacketDelayEntry OBJECT-TYPE
+ SYNTAX AcPMModulePacketDelayEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ ""
+ INDEX {acPMModulePacketDelayInterval}
+ ::= {acPMModulePacketDelayTable 1}
+
+
+
+ -- ****************************************
+ -- acPMModulePacketDelay TABLE
+ -- ****************************************
+ AcPMModulePacketDelayEntry ::= SEQUENCE {
+ acPMModulePacketDelayInterval Unsigned32,
+ acPMModulePacketDelayVal Gauge32,
+ acPMModulePacketDelayAverage Integer32,
+ acPMModulePacketDelayMax Integer32,
+ acPMModulePacketDelayMin Integer32,
+ acPMModulePacketDelayTimeBelowLowThreshold Integer32,
+ acPMModulePacketDelayTimeBetweenThresholds Integer32,
+ acPMModulePacketDelayTimeAboveHighThreshold Integer32,
+ acPMModulePacketDelayFullDayAverage Integer32,
+ acPMModulePacketDelayVolume Counter32
+ }
+
+
+
+ acPMModulePacketDelayInterval OBJECT-TYPE
+ SYNTAX Unsigned32 (0..2)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Interval index.
+0 - current period (incomplete monitoring - mid period).
+1 - Last full period.
+2 - One before last."
+ ::= {acPMModulePacketDelayEntry 1}
+
+
+
+ acPMModulePacketDelayVal OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Value of gauge or counter."
+ ::= {acPMModulePacketDelayEntry 2}
+
+
+
+ acPMModulePacketDelayAverage OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Average value with in the period time."
+ ::= {acPMModulePacketDelayEntry 3}
+
+
+
+ acPMModulePacketDelayMax OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Maximum value with in the period time."
+ ::= {acPMModulePacketDelayEntry 4}
+
+
+
+ acPMModulePacketDelayMin OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Minimum value with in the period time."
+ ::= {acPMModulePacketDelayEntry 5}
+
+
+
+ acPMModulePacketDelayTimeBelowLowThreshold OBJECT-TYPE
+ SYNTAX Integer32 (-1..100)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Percent of interval time for which gauge is below what was determined
+as the low threshold."
+ ::= {acPMModulePacketDelayEntry 6}
+
+
+
+ acPMModulePacketDelayTimeBetweenThresholds OBJECT-TYPE
+ SYNTAX Integer32 (-1..100)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Percent of interval time for which gauge is above what was determined
+as the high threshold."
+ ::= {acPMModulePacketDelayEntry 7}
+
+
+
+ acPMModulePacketDelayTimeAboveHighThreshold OBJECT-TYPE
+ SYNTAX Integer32 (-1..100)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Percent of interval time for which gauge is between what were
+determined as the low and high thresholds."
+ ::= {acPMModulePacketDelayEntry 8}
+
+
+
+ acPMModulePacketDelayFullDayAverage OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The average of full 24 hours."
+ ::= {acPMModulePacketDelayEntry 9}
+
+
+
+ acPMModulePacketDelayVolume OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Activity volume."
+ ::= {acPMModulePacketDelayEntry 10}
+
+
+
+ -- ****************************************
+ -- acPMModulePacketJitter table declaration
+ -- ****************************************
+ acPMModulePacketJitterTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AcPMModulePacketJitterEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Packet jitter in RTCP data. This counter is collected for the entire TPM module, and includes TDM-IP and IP-IP calls."
+ ::= {acPMMediaNetworkingAggregated 2}
+
+
+
+ -- ****************************************
+ -- acPMModulePacketJitter table entry
+ -- ****************************************
+ acPMModulePacketJitterEntry OBJECT-TYPE
+ SYNTAX AcPMModulePacketJitterEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ ""
+ INDEX {acPMModulePacketJitterInterval}
+ ::= {acPMModulePacketJitterTable 1}
+
+
+
+ -- ****************************************
+ -- acPMModulePacketJitter TABLE
+ -- ****************************************
+ AcPMModulePacketJitterEntry ::= SEQUENCE {
+ acPMModulePacketJitterInterval Unsigned32,
+ acPMModulePacketJitterVal Gauge32,
+ acPMModulePacketJitterAverage Integer32,
+ acPMModulePacketJitterMax Integer32,
+ acPMModulePacketJitterMin Integer32,
+ acPMModulePacketJitterTimeBelowLowThreshold Integer32,
+ acPMModulePacketJitterTimeBetweenThresholds Integer32,
+ acPMModulePacketJitterTimeAboveHighThreshold Integer32,
+ acPMModulePacketJitterFullDayAverage Integer32,
+ acPMModulePacketJitterVolume Counter32
+ }
+
+
+
+ acPMModulePacketJitterInterval OBJECT-TYPE
+ SYNTAX Unsigned32 (0..2)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Interval index.
+0 - current period (incomplete monitoring - mid period).
+1 - Last full period.
+2 - One before last."
+ ::= {acPMModulePacketJitterEntry 1}
+
+
+
+ acPMModulePacketJitterVal OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Value of gauge or counter."
+ ::= {acPMModulePacketJitterEntry 2}
+
+
+
+ acPMModulePacketJitterAverage OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Average value with in the period time."
+ ::= {acPMModulePacketJitterEntry 3}
+
+
+
+ acPMModulePacketJitterMax OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Maximum value with in the period time."
+ ::= {acPMModulePacketJitterEntry 4}
+
+
+
+ acPMModulePacketJitterMin OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Minimum value with in the period time."
+ ::= {acPMModulePacketJitterEntry 5}
+
+
+
+ acPMModulePacketJitterTimeBelowLowThreshold OBJECT-TYPE
+ SYNTAX Integer32 (-1..100)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Percent of interval time for which gauge is below what was determined
+as the low threshold."
+ ::= {acPMModulePacketJitterEntry 6}
+
+
+
+ acPMModulePacketJitterTimeBetweenThresholds OBJECT-TYPE
+ SYNTAX Integer32 (-1..100)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Percent of interval time for which gauge is above what was determined
+as the high threshold."
+ ::= {acPMModulePacketJitterEntry 7}
+
+
+
+ acPMModulePacketJitterTimeAboveHighThreshold OBJECT-TYPE
+ SYNTAX Integer32 (-1..100)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Percent of interval time for which gauge is between what were
+determined as the low and high thresholds."
+ ::= {acPMModulePacketJitterEntry 8}
+
+
+
+ acPMModulePacketJitterFullDayAverage OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The average of full 24 hours."
+ ::= {acPMModulePacketJitterEntry 9}
+
+
+
+ acPMModulePacketJitterVolume OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Activity volume."
+ ::= {acPMModulePacketJitterEntry 10}
+
+
+
+ -- ****************************************
+ -- acPMModuleRTPBytesTx table declaration
+ -- ****************************************
+ acPMModuleRTPBytesTxTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AcPMModuleRTPBytesTxEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "RTP bytes sent in RTCP data, per entire module."
+ ::= {acPMMediaNetworkingAggregated 3}
+
+
+
+ -- ****************************************
+ -- acPMModuleRTPBytesTx table entry
+ -- ****************************************
+ acPMModuleRTPBytesTxEntry OBJECT-TYPE
+ SYNTAX AcPMModuleRTPBytesTxEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ ""
+ INDEX {acPMModuleRTPBytesTxInterval}
+ ::= {acPMModuleRTPBytesTxTable 1}
+
+
+
+ -- ****************************************
+ -- acPMModuleRTPBytesTx TABLE
+ -- ****************************************
+ AcPMModuleRTPBytesTxEntry ::= SEQUENCE {
+ acPMModuleRTPBytesTxInterval Unsigned32,
+ acPMModuleRTPBytesTxAverage Integer32,
+ acPMModuleRTPBytesTxMax Integer32,
+ acPMModuleRTPBytesTxMin Integer32,
+ acPMModuleRTPBytesTxTimeBelowLowThreshold Integer32,
+ acPMModuleRTPBytesTxTimeBetweenThresholds Integer32,
+ acPMModuleRTPBytesTxTimeAboveHighThreshold Integer32,
+ acPMModuleRTPBytesTxFullDayAverage Integer32,
+ acPMModuleRTPBytesTxVolume Counter32
+ }
+
+
+
+ acPMModuleRTPBytesTxInterval OBJECT-TYPE
+ SYNTAX Unsigned32 (0..2)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Interval index.
+0 - current period (incomplete monitoring - mid period).
+1 - Last full period.
+2 - One before last."
+ ::= {acPMModuleRTPBytesTxEntry 1}
+
+
+
+ acPMModuleRTPBytesTxAverage OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Average value with in the period time."
+ ::= {acPMModuleRTPBytesTxEntry 2}
+
+
+
+ acPMModuleRTPBytesTxMax OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Maximum value with in the period time."
+ ::= {acPMModuleRTPBytesTxEntry 3}
+
+
+
+ acPMModuleRTPBytesTxMin OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Minimum value with in the period time."
+ ::= {acPMModuleRTPBytesTxEntry 4}
+
+
+
+ acPMModuleRTPBytesTxTimeBelowLowThreshold OBJECT-TYPE
+ SYNTAX Integer32 (-1..100)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Percent of interval time for which gauge is below what was determined
+as the low threshold."
+ ::= {acPMModuleRTPBytesTxEntry 5}
+
+
+
+ acPMModuleRTPBytesTxTimeBetweenThresholds OBJECT-TYPE
+ SYNTAX Integer32 (-1..100)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Percent of interval time for which gauge is above what was determined
+as the high threshold."
+ ::= {acPMModuleRTPBytesTxEntry 6}
+
+
+
+ acPMModuleRTPBytesTxTimeAboveHighThreshold OBJECT-TYPE
+ SYNTAX Integer32 (-1..100)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Percent of interval time for which gauge is between what were
+determined as the low and high thresholds."
+ ::= {acPMModuleRTPBytesTxEntry 7}
+
+
+
+ acPMModuleRTPBytesTxFullDayAverage OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The average of full 24 hours."
+ ::= {acPMModuleRTPBytesTxEntry 8}
+
+
+
+ acPMModuleRTPBytesTxVolume OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Activity volume."
+ ::= {acPMModuleRTPBytesTxEntry 9}
+
+
+
+ -- ****************************************
+ -- acPMModuleRTPBytesRx table declaration
+ -- ****************************************
+ acPMModuleRTPBytesRxTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AcPMModuleRTPBytesRxEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "RTP bytes received in RTCP data, per entire module."
+ ::= {acPMMediaNetworkingAggregated 4}
+
+
+
+ -- ****************************************
+ -- acPMModuleRTPBytesRx table entry
+ -- ****************************************
+ acPMModuleRTPBytesRxEntry OBJECT-TYPE
+ SYNTAX AcPMModuleRTPBytesRxEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ ""
+ INDEX {acPMModuleRTPBytesRxInterval}
+ ::= {acPMModuleRTPBytesRxTable 1}
+
+
+
+ -- ****************************************
+ -- acPMModuleRTPBytesRx TABLE
+ -- ****************************************
+ AcPMModuleRTPBytesRxEntry ::= SEQUENCE {
+ acPMModuleRTPBytesRxInterval Unsigned32,
+ acPMModuleRTPBytesRxAverage Integer32,
+ acPMModuleRTPBytesRxMax Integer32,
+ acPMModuleRTPBytesRxMin Integer32,
+ acPMModuleRTPBytesRxTimeBelowLowThreshold Integer32,
+ acPMModuleRTPBytesRxTimeBetweenThresholds Integer32,
+ acPMModuleRTPBytesRxTimeAboveHighThreshold Integer32,
+ acPMModuleRTPBytesRxFullDayAverage Integer32,
+ acPMModuleRTPBytesRxVolume Counter32
+ }
+
+
+
+ acPMModuleRTPBytesRxInterval OBJECT-TYPE
+ SYNTAX Unsigned32 (0..2)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Interval index.
+0 - current period (incomplete monitoring - mid period).
+1 - Last full period.
+2 - One before last."
+ ::= {acPMModuleRTPBytesRxEntry 1}
+
+
+
+ acPMModuleRTPBytesRxAverage OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Average value with in the period time."
+ ::= {acPMModuleRTPBytesRxEntry 2}
+
+
+
+ acPMModuleRTPBytesRxMax OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Maximum value with in the period time."
+ ::= {acPMModuleRTPBytesRxEntry 3}
+
+
+
+ acPMModuleRTPBytesRxMin OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Minimum value with in the period time."
+ ::= {acPMModuleRTPBytesRxEntry 4}
+
+
+
+ acPMModuleRTPBytesRxTimeBelowLowThreshold OBJECT-TYPE
+ SYNTAX Integer32 (-1..100)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Percent of interval time for which gauge is below what was determined
+as the low threshold."
+ ::= {acPMModuleRTPBytesRxEntry 5}
+
+
+
+ acPMModuleRTPBytesRxTimeBetweenThresholds OBJECT-TYPE
+ SYNTAX Integer32 (-1..100)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Percent of interval time for which gauge is above what was determined
+as the high threshold."
+ ::= {acPMModuleRTPBytesRxEntry 6}
+
+
+
+ acPMModuleRTPBytesRxTimeAboveHighThreshold OBJECT-TYPE
+ SYNTAX Integer32 (-1..100)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Percent of interval time for which gauge is between what were
+determined as the low and high thresholds."
+ ::= {acPMModuleRTPBytesRxEntry 7}
+
+
+
+ acPMModuleRTPBytesRxFullDayAverage OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The average of full 24 hours."
+ ::= {acPMModuleRTPBytesRxEntry 8}
+
+
+
+ acPMModuleRTPBytesRxVolume OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Activity volume."
+ ::= {acPMModuleRTPBytesRxEntry 9}
+
+
+
+ -- ****************************************
+ -- acPMModuleRTPPacketsTx table declaration
+ -- ****************************************
+ acPMModuleRTPPacketsTxTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AcPMModuleRTPPacketsTxEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "RTP packets sent in RTCP data, per entire module."
+ ::= {acPMMediaNetworkingAggregated 5}
+
+
+
+ -- ****************************************
+ -- acPMModuleRTPPacketsTx table entry
+ -- ****************************************
+ acPMModuleRTPPacketsTxEntry OBJECT-TYPE
+ SYNTAX AcPMModuleRTPPacketsTxEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ ""
+ INDEX {acPMModuleRTPPacketsTxInterval}
+ ::= {acPMModuleRTPPacketsTxTable 1}
+
+
+
+ -- ****************************************
+ -- acPMModuleRTPPacketsTx TABLE
+ -- ****************************************
+ AcPMModuleRTPPacketsTxEntry ::= SEQUENCE {
+ acPMModuleRTPPacketsTxInterval Unsigned32,
+ acPMModuleRTPPacketsTxAverage Integer32,
+ acPMModuleRTPPacketsTxMax Integer32,
+ acPMModuleRTPPacketsTxMin Integer32,
+ acPMModuleRTPPacketsTxTimeBelowLowThreshold Integer32,
+ acPMModuleRTPPacketsTxTimeBetweenThresholds Integer32,
+ acPMModuleRTPPacketsTxTimeAboveHighThreshold Integer32,
+ acPMModuleRTPPacketsTxFullDayAverage Integer32,
+ acPMModuleRTPPacketsTxTotal Integer32,
+ acPMModuleRTPPacketsTxVolume Counter32
+ }
+
+
+
+ acPMModuleRTPPacketsTxInterval OBJECT-TYPE
+ SYNTAX Unsigned32 (0..2)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Interval index.
+0 - current period (incomplete monitoring - mid period).
+1 - Last full period.
+2 - One before last."
+ ::= {acPMModuleRTPPacketsTxEntry 1}
+
+
+
+ acPMModuleRTPPacketsTxAverage OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Average value with in the period time."
+ ::= {acPMModuleRTPPacketsTxEntry 2}
+
+
+
+ acPMModuleRTPPacketsTxMax OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Maximum value with in the period time."
+ ::= {acPMModuleRTPPacketsTxEntry 3}
+
+
+
+ acPMModuleRTPPacketsTxMin OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Minimum value with in the period time."
+ ::= {acPMModuleRTPPacketsTxEntry 4}
+
+
+
+ acPMModuleRTPPacketsTxTimeBelowLowThreshold OBJECT-TYPE
+ SYNTAX Integer32 (-1..100)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Percent of interval time for which gauge is below what was determined
+as the low threshold."
+ ::= {acPMModuleRTPPacketsTxEntry 5}
+
+
+
+ acPMModuleRTPPacketsTxTimeBetweenThresholds OBJECT-TYPE
+ SYNTAX Integer32 (-1..100)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Percent of interval time for which gauge is above what was determined
+as the high threshold."
+ ::= {acPMModuleRTPPacketsTxEntry 6}
+
+
+
+ acPMModuleRTPPacketsTxTimeAboveHighThreshold OBJECT-TYPE
+ SYNTAX Integer32 (-1..100)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Percent of interval time for which gauge is between what were
+determined as the low and high thresholds."
+ ::= {acPMModuleRTPPacketsTxEntry 7}
+
+
+
+ acPMModuleRTPPacketsTxFullDayAverage OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The average of full 24 hours."
+ ::= {acPMModuleRTPPacketsTxEntry 8}
+
+
+
+ acPMModuleRTPPacketsTxTotal OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Total since last reset."
+ ::= {acPMModuleRTPPacketsTxEntry 9}
+
+
+
+ acPMModuleRTPPacketsTxVolume OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Activity volume."
+ ::= {acPMModuleRTPPacketsTxEntry 10}
+
+
+
+ -- ****************************************
+ -- acPMModuleRTPPacketsRx table declaration
+ -- ****************************************
+ acPMModuleRTPPacketsRxTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AcPMModuleRTPPacketsRxEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "RTP packets received in RTCP data, per entire module."
+ ::= {acPMMediaNetworkingAggregated 6}
+
+
+
+ -- ****************************************
+ -- acPMModuleRTPPacketsRx table entry
+ -- ****************************************
+ acPMModuleRTPPacketsRxEntry OBJECT-TYPE
+ SYNTAX AcPMModuleRTPPacketsRxEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ ""
+ INDEX {acPMModuleRTPPacketsRxInterval}
+ ::= {acPMModuleRTPPacketsRxTable 1}
+
+
+
+ -- ****************************************
+ -- acPMModuleRTPPacketsRx TABLE
+ -- ****************************************
+ AcPMModuleRTPPacketsRxEntry ::= SEQUENCE {
+ acPMModuleRTPPacketsRxInterval Unsigned32,
+ acPMModuleRTPPacketsRxAverage Integer32,
+ acPMModuleRTPPacketsRxMax Integer32,
+ acPMModuleRTPPacketsRxMin Integer32,
+ acPMModuleRTPPacketsRxTimeBelowLowThreshold Integer32,
+ acPMModuleRTPPacketsRxTimeBetweenThresholds Integer32,
+ acPMModuleRTPPacketsRxTimeAboveHighThreshold Integer32,
+ acPMModuleRTPPacketsRxFullDayAverage Integer32,
+ acPMModuleRTPPacketsRxTotal Integer32,
+ acPMModuleRTPPacketsRxVolume Counter32
+ }
+
+
+
+ acPMModuleRTPPacketsRxInterval OBJECT-TYPE
+ SYNTAX Unsigned32 (0..2)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Interval index.
+0 - current period (incomplete monitoring - mid period).
+1 - Last full period.
+2 - One before last."
+ ::= {acPMModuleRTPPacketsRxEntry 1}
+
+
+
+ acPMModuleRTPPacketsRxAverage OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Average value with in the period time."
+ ::= {acPMModuleRTPPacketsRxEntry 2}
+
+
+
+ acPMModuleRTPPacketsRxMax OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Maximum value with in the period time."
+ ::= {acPMModuleRTPPacketsRxEntry 3}
+
+
+
+ acPMModuleRTPPacketsRxMin OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Minimum value with in the period time."
+ ::= {acPMModuleRTPPacketsRxEntry 4}
+
+
+
+ acPMModuleRTPPacketsRxTimeBelowLowThreshold OBJECT-TYPE
+ SYNTAX Integer32 (-1..100)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Percent of interval time for which gauge is below what was determined
+as the low threshold."
+ ::= {acPMModuleRTPPacketsRxEntry 5}
+
+
+
+ acPMModuleRTPPacketsRxTimeBetweenThresholds OBJECT-TYPE
+ SYNTAX Integer32 (-1..100)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Percent of interval time for which gauge is above what was determined
+as the high threshold."
+ ::= {acPMModuleRTPPacketsRxEntry 6}
+
+
+
+ acPMModuleRTPPacketsRxTimeAboveHighThreshold OBJECT-TYPE
+ SYNTAX Integer32 (-1..100)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Percent of interval time for which gauge is between what were
+determined as the low and high thresholds."
+ ::= {acPMModuleRTPPacketsRxEntry 7}
+
+
+
+ acPMModuleRTPPacketsRxFullDayAverage OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The average of full 24 hours."
+ ::= {acPMModuleRTPPacketsRxEntry 8}
+
+
+
+ acPMModuleRTPPacketsRxTotal OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Total since last reset."
+ ::= {acPMModuleRTPPacketsRxEntry 9}
+
+
+
+ acPMModuleRTPPacketsRxVolume OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Activity volume."
+ ::= {acPMModuleRTPPacketsRxEntry 10}
+
+
+
+ acPMChannelUtilization OBJECT IDENTIFIER ::= {acPMMediaData 41}
+
+
+ -- ****************************************
+ -- acPMFaxChannels table declaration
+ -- ****************************************
+ acPMFaxChannelsTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AcPMFaxChannelsEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Total number of active fax channels."
+ ::= {acPMChannelUtilization 1}
+
+
+
+ -- ****************************************
+ -- acPMFaxChannels table entry
+ -- ****************************************
+ acPMFaxChannelsEntry OBJECT-TYPE
+ SYNTAX AcPMFaxChannelsEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ ""
+ INDEX {acPMFaxChannelsInterval}
+ ::= {acPMFaxChannelsTable 1}
+
+
+
+ -- ****************************************
+ -- acPMFaxChannels TABLE
+ -- ****************************************
+ AcPMFaxChannelsEntry ::= SEQUENCE {
+ acPMFaxChannelsInterval Unsigned32,
+ acPMFaxChannelsVal Gauge32,
+ acPMFaxChannelsAverage Integer32,
+ acPMFaxChannelsMax Integer32,
+ acPMFaxChannelsMin Integer32,
+ acPMFaxChannelsTimeBelowLowThreshold Integer32,
+ acPMFaxChannelsTimeBetweenThresholds Integer32,
+ acPMFaxChannelsTimeAboveHighThreshold Integer32,
+ acPMFaxChannelsFullDayAverage Integer32,
+ acPMFaxChannelsVolume Counter32
+ }
+
+
+
+ acPMFaxChannelsInterval OBJECT-TYPE
+ SYNTAX Unsigned32 (0..2)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Interval index.
+0 - current period (incomplete monitoring - mid period).
+1 - Last full period.
+2 - One before last."
+ ::= {acPMFaxChannelsEntry 1}
+
+
+
+ acPMFaxChannelsVal OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Value of gauge or counter."
+ ::= {acPMFaxChannelsEntry 2}
+
+
+
+ acPMFaxChannelsAverage OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Average value with in the period time."
+ ::= {acPMFaxChannelsEntry 3}
+
+
+
+ acPMFaxChannelsMax OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Maximum value with in the period time."
+ ::= {acPMFaxChannelsEntry 4}
+
+
+
+ acPMFaxChannelsMin OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Minimum value with in the period time."
+ ::= {acPMFaxChannelsEntry 5}
+
+
+
+ acPMFaxChannelsTimeBelowLowThreshold OBJECT-TYPE
+ SYNTAX Integer32 (-1..100)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Percent of interval time for which gauge is below what was determined
+as the low threshold."
+ ::= {acPMFaxChannelsEntry 6}
+
+
+
+ acPMFaxChannelsTimeBetweenThresholds OBJECT-TYPE
+ SYNTAX Integer32 (-1..100)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Percent of interval time for which gauge is above what was determined
+as the high threshold."
+ ::= {acPMFaxChannelsEntry 7}
+
+
+
+ acPMFaxChannelsTimeAboveHighThreshold OBJECT-TYPE
+ SYNTAX Integer32 (-1..100)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Percent of interval time for which gauge is between what were
+determined as the low and high thresholds."
+ ::= {acPMFaxChannelsEntry 8}
+
+
+
+ acPMFaxChannelsFullDayAverage OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The average of full 24 hours."
+ ::= {acPMFaxChannelsEntry 9}
+
+
+
+ acPMFaxChannelsVolume OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Activity volume."
+ ::= {acPMFaxChannelsEntry 10}
+
+
+
+ -- ****************************************
+ -- acPMModemChannels table declaration
+ -- ****************************************
+ acPMModemChannelsTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AcPMModemChannelsEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Total number of active modem channels."
+ ::= {acPMChannelUtilization 2}
+
+
+
+ -- ****************************************
+ -- acPMModemChannels table entry
+ -- ****************************************
+ acPMModemChannelsEntry OBJECT-TYPE
+ SYNTAX AcPMModemChannelsEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ ""
+ INDEX {acPMModemChannelsInterval}
+ ::= {acPMModemChannelsTable 1}
+
+
+
+ -- ****************************************
+ -- acPMModemChannels TABLE
+ -- ****************************************
+ AcPMModemChannelsEntry ::= SEQUENCE {
+ acPMModemChannelsInterval Unsigned32,
+ acPMModemChannelsVal Gauge32,
+ acPMModemChannelsAverage Integer32,
+ acPMModemChannelsMax Integer32,
+ acPMModemChannelsMin Integer32,
+ acPMModemChannelsTimeBelowLowThreshold Integer32,
+ acPMModemChannelsTimeBetweenThresholds Integer32,
+ acPMModemChannelsTimeAboveHighThreshold Integer32,
+ acPMModemChannelsFullDayAverage Integer32
+ }
+
+
+
+ acPMModemChannelsInterval OBJECT-TYPE
+ SYNTAX Unsigned32 (0..2)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Interval index.
+0 - current period (incomplete monitoring - mid period).
+1 - Last full period.
+2 - One before last."
+ ::= {acPMModemChannelsEntry 1}
+
+
+
+ acPMModemChannelsVal OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Value of gauge or counter."
+ ::= {acPMModemChannelsEntry 2}
+
+
+
+ acPMModemChannelsAverage OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Average value within the period time."
+ ::= {acPMModemChannelsEntry 3}
+
+
+
+ acPMModemChannelsMax OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Maximum value within the period time."
+ ::= {acPMModemChannelsEntry 4}
+
+
+
+ acPMModemChannelsMin OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Minimum value within the period time."
+ ::= {acPMModemChannelsEntry 5}
+
+
+
+ acPMModemChannelsTimeBelowLowThreshold OBJECT-TYPE
+ SYNTAX Integer32 (-1..100)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Percent of interval time for which gauge is below what was determined
+as the low threshold."
+ ::= {acPMModemChannelsEntry 6}
+
+
+
+ acPMModemChannelsTimeBetweenThresholds OBJECT-TYPE
+ SYNTAX Integer32 (-1..100)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Percent of interval time for which gauge is above what was determined
+as the high threshold."
+ ::= {acPMModemChannelsEntry 7}
+
+
+
+ acPMModemChannelsTimeAboveHighThreshold OBJECT-TYPE
+ SYNTAX Integer32 (-1..100)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Percent of interval time for which gauge is between what were
+determined as the low and high thresholds."
+ ::= {acPMModemChannelsEntry 8}
+
+
+
+ acPMModemChannelsFullDayAverage OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The average of full 24 hours."
+ ::= {acPMModemChannelsEntry 9}
+
+
+
+ -- ****************************************
+ -- acPMTdm2IpChannels table declaration
+ -- ****************************************
+ acPMTdm2IpChannelsTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AcPMTdm2IpChannelsEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Total number of active TDM-to-IP channels."
+ ::= {acPMChannelUtilization 3}
+
+
+
+ -- ****************************************
+ -- acPMTdm2IpChannels table entry
+ -- ****************************************
+ acPMTdm2IpChannelsEntry OBJECT-TYPE
+ SYNTAX AcPMTdm2IpChannelsEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ ""
+ INDEX {acPMTdm2IpChannelsInterval}
+ ::= {acPMTdm2IpChannelsTable 1}
+
+
+
+ -- ****************************************
+ -- acPMTdm2IpChannels TABLE
+ -- ****************************************
+ AcPMTdm2IpChannelsEntry ::= SEQUENCE {
+ acPMTdm2IpChannelsInterval Unsigned32,
+ acPMTdm2IpChannelsVal Gauge32,
+ acPMTdm2IpChannelsAverage Integer32,
+ acPMTdm2IpChannelsMax Integer32,
+ acPMTdm2IpChannelsMin Integer32,
+ acPMTdm2IpChannelsVolume Counter32,
+ acPMTdm2IpChannelsTimeBelowLowThreshold Integer32,
+ acPMTdm2IpChannelsTimeBetweenThresholds Integer32,
+ acPMTdm2IpChannelsTimeAboveHighThreshold Integer32,
+ acPMTdm2IpChannelsFullDayAverage Integer32
+ }
+
+
+
+ acPMTdm2IpChannelsInterval OBJECT-TYPE
+ SYNTAX Unsigned32 (0..2)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Interval index.
+0 - current period (incomplete monitoring - mid period).
+1 - Last full period.
+2 - One before last."
+ ::= {acPMTdm2IpChannelsEntry 1}
+
+
+
+ acPMTdm2IpChannelsVal OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Value of gauge or counter."
+ ::= {acPMTdm2IpChannelsEntry 2}
+
+
+
+ acPMTdm2IpChannelsAverage OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Average value within the period time."
+ ::= {acPMTdm2IpChannelsEntry 3}
+
+
+
+ acPMTdm2IpChannelsMax OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Maximum value within the period time."
+ ::= {acPMTdm2IpChannelsEntry 4}
+
+
+
+ acPMTdm2IpChannelsMin OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Minimum value within the period time."
+ ::= {acPMTdm2IpChannelsEntry 5}
+
+
+
+ acPMTdm2IpChannelsVolume OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Activity volume."
+ ::= {acPMTdm2IpChannelsEntry 6}
+
+
+
+ acPMTdm2IpChannelsTimeBelowLowThreshold OBJECT-TYPE
+ SYNTAX Integer32 (-1..100)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Percent of interval time for which gauge is below what was determined
+as the low threshold."
+ ::= {acPMTdm2IpChannelsEntry 7}
+
+
+
+ acPMTdm2IpChannelsTimeBetweenThresholds OBJECT-TYPE
+ SYNTAX Integer32 (-1..100)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Percent of interval time for which gauge is above what was determined
+as the high threshold."
+ ::= {acPMTdm2IpChannelsEntry 8}
+
+
+
+ acPMTdm2IpChannelsTimeAboveHighThreshold OBJECT-TYPE
+ SYNTAX Integer32 (-1..100)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Percent of interval time for which gauge is between what were
+determined as the low and high thresholds."
+ ::= {acPMTdm2IpChannelsEntry 9}
+
+
+
+ acPMTdm2IpChannelsFullDayAverage OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The average of full 24 hours."
+ ::= {acPMTdm2IpChannelsEntry 10}
+
+
+
+ -- ****************************************
+ -- acPMRTPStreams table declaration
+ -- ****************************************
+ acPMRTPStreamsTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AcPMRTPStreamsEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Total number of active RTP streams."
+ ::= {acPMChannelUtilization 4}
+
+
+
+ -- ****************************************
+ -- acPMRTPStreams table entry
+ -- ****************************************
+ acPMRTPStreamsEntry OBJECT-TYPE
+ SYNTAX AcPMRTPStreamsEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ ""
+ INDEX {acPMRTPStreamsInterval}
+ ::= {acPMRTPStreamsTable 1}
+
+
+
+ -- ****************************************
+ -- acPMRTPStreams TABLE
+ -- ****************************************
+ AcPMRTPStreamsEntry ::= SEQUENCE {
+ acPMRTPStreamsInterval Unsigned32,
+ acPMRTPStreamsVal Gauge32,
+ acPMRTPStreamsAverage Integer32,
+ acPMRTPStreamsMax Integer32,
+ acPMRTPStreamsMin Integer32,
+ acPMRTPStreamsVolume Counter32,
+ acPMRTPStreamsTimeBelowLowThreshold Integer32,
+ acPMRTPStreamsTimeBetweenThresholds Integer32,
+ acPMRTPStreamsTimeAboveHighThreshold Integer32,
+ acPMRTPStreamsFullDayAverage Integer32
+ }
+
+
+
+ acPMRTPStreamsInterval OBJECT-TYPE
+ SYNTAX Unsigned32 (0..2)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Interval index.
+0 - current period (incomplete monitoring - mid period).
+1 - Last full period.
+2 - One before last."
+ ::= {acPMRTPStreamsEntry 1}
+
+
+
+ acPMRTPStreamsVal OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Value of gauge or counter."
+ ::= {acPMRTPStreamsEntry 2}
+
+
+
+ acPMRTPStreamsAverage OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Average value within the period time."
+ ::= {acPMRTPStreamsEntry 3}
+
+
+
+ acPMRTPStreamsMax OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Maximum value within the period time."
+ ::= {acPMRTPStreamsEntry 4}
+
+
+
+ acPMRTPStreamsMin OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Minimum value within the period time."
+ ::= {acPMRTPStreamsEntry 5}
+
+
+
+ acPMRTPStreamsVolume OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Activity volume."
+ ::= {acPMRTPStreamsEntry 6}
+
+
+
+ acPMRTPStreamsTimeBelowLowThreshold OBJECT-TYPE
+ SYNTAX Integer32 (-1..100)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Percent of interval time for which gauge is below what was determined
+as the low threshold."
+ ::= {acPMRTPStreamsEntry 7}
+
+
+
+ acPMRTPStreamsTimeBetweenThresholds OBJECT-TYPE
+ SYNTAX Integer32 (-1..100)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Percent of interval time for which gauge is above what was determined
+as the high threshold."
+ ::= {acPMRTPStreamsEntry 8}
+
+
+
+ acPMRTPStreamsTimeAboveHighThreshold OBJECT-TYPE
+ SYNTAX Integer32 (-1..100)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Percent of interval time for which gauge is between what were
+determined as the low and high thresholds."
+ ::= {acPMRTPStreamsEntry 9}
+
+
+
+ acPMRTPStreamsFullDayAverage OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The average of full 24 hours."
+ ::= {acPMRTPStreamsEntry 10}
+
+
+
+ -- ****************************************
+ -- acPMSRTPStreams table declaration
+ -- ****************************************
+ acPMSRTPStreamsTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AcPMSRTPStreamsEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Total number of active SRTP streams."
+ ::= {acPMChannelUtilization 5}
+
+
+
+ -- ****************************************
+ -- acPMSRTPStreams table entry
+ -- ****************************************
+ acPMSRTPStreamsEntry OBJECT-TYPE
+ SYNTAX AcPMSRTPStreamsEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ ""
+ INDEX {acPMSRTPStreamsInterval}
+ ::= {acPMSRTPStreamsTable 1}
+
+
+
+ -- ****************************************
+ -- acPMSRTPStreams TABLE
+ -- ****************************************
+ AcPMSRTPStreamsEntry ::= SEQUENCE {
+ acPMSRTPStreamsInterval Unsigned32,
+ acPMSRTPStreamsVal Gauge32,
+ acPMSRTPStreamsAverage Integer32,
+ acPMSRTPStreamsMax Integer32,
+ acPMSRTPStreamsMin Integer32,
+ acPMSRTPStreamsVolume Counter32,
+ acPMSRTPStreamsTimeBelowLowThreshold Integer32,
+ acPMSRTPStreamsTimeBetweenThresholds Integer32,
+ acPMSRTPStreamsTimeAboveHighThreshold Integer32,
+ acPMSRTPStreamsFullDayAverage Integer32
+ }
+
+
+
+ acPMSRTPStreamsInterval OBJECT-TYPE
+ SYNTAX Unsigned32 (0..2)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Interval index.
+0 - current period (incomplete monitoring - mid period).
+1 - Last full period.
+2 - One before last."
+ ::= {acPMSRTPStreamsEntry 1}
+
+
+
+ acPMSRTPStreamsVal OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Value of gauge or counter."
+ ::= {acPMSRTPStreamsEntry 2}
+
+
+
+ acPMSRTPStreamsAverage OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Average value within the period time."
+ ::= {acPMSRTPStreamsEntry 3}
+
+
+
+ acPMSRTPStreamsMax OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Maximum value within the period time."
+ ::= {acPMSRTPStreamsEntry 4}
+
+
+
+ acPMSRTPStreamsMin OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Minimum value within the period time."
+ ::= {acPMSRTPStreamsEntry 5}
+
+
+
+ acPMSRTPStreamsVolume OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Activity volume."
+ ::= {acPMSRTPStreamsEntry 6}
+
+
+
+ acPMSRTPStreamsTimeBelowLowThreshold OBJECT-TYPE
+ SYNTAX Integer32 (-1..100)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Percent of interval time for which gauge is below what was determined
+as the low threshold."
+ ::= {acPMSRTPStreamsEntry 7}
+
+
+
+ acPMSRTPStreamsTimeBetweenThresholds OBJECT-TYPE
+ SYNTAX Integer32 (-1..100)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Percent of interval time for which gauge is above what was determined
+as the high threshold."
+ ::= {acPMSRTPStreamsEntry 8}
+
+
+
+ acPMSRTPStreamsTimeAboveHighThreshold OBJECT-TYPE
+ SYNTAX Integer32 (-1..100)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Percent of interval time for which gauge is between what were
+determined as the low and high thresholds."
+ ::= {acPMSRTPStreamsEntry 9}
+
+
+
+ acPMSRTPStreamsFullDayAverage OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The average of full 24 hours."
+ ::= {acPMSRTPStreamsEntry 10}
+
+
+
+ -- ****************************************
+ -- acPMMulticastRegisteredChannels table declaration
+ -- ****************************************
+ acPMMulticastRegisteredChannelsTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AcPMMulticastRegisteredChannelsEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Total number of active channels connected to a multicast source."
+ ::= {acPMChannelUtilization 6}
+
+
+
+ -- ****************************************
+ -- acPMMulticastRegisteredChannels table entry
+ -- ****************************************
+ acPMMulticastRegisteredChannelsEntry OBJECT-TYPE
+ SYNTAX AcPMMulticastRegisteredChannelsEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ ""
+ INDEX {acPMMulticastRegisteredChannelsInterval}
+ ::= {acPMMulticastRegisteredChannelsTable 1}
+
+
+
+ -- ****************************************
+ -- acPMMulticastRegisteredChannels TABLE
+ -- ****************************************
+ AcPMMulticastRegisteredChannelsEntry ::= SEQUENCE {
+ acPMMulticastRegisteredChannelsInterval Unsigned32,
+ acPMMulticastRegisteredChannelsVal Gauge32,
+ acPMMulticastRegisteredChannelsAverage Integer32,
+ acPMMulticastRegisteredChannelsMax Integer32,
+ acPMMulticastRegisteredChannelsMin Integer32,
+ acPMMulticastRegisteredChannelsVolume Counter32,
+ acPMMulticastRegisteredChannelsTimeBelowLowThreshold
+ Integer32,
+ acPMMulticastRegisteredChannelsTimeBetweenThresholds
+ Integer32,
+ acPMMulticastRegisteredChannelsTimeAboveHighThreshold
+ Integer32,
+ acPMMulticastRegisteredChannelsFullDayAverage Integer32
+ }
+
+
+
+ acPMMulticastRegisteredChannelsInterval OBJECT-TYPE
+ SYNTAX Unsigned32 (0..2)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Interval index.
+0 - current period (incomplete monitoring - mid period).
+1 - Last full period.
+2 - One before last."
+ ::= {acPMMulticastRegisteredChannelsEntry 1}
+
+
+
+ acPMMulticastRegisteredChannelsVal OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Value of gauge or counter."
+ ::= {acPMMulticastRegisteredChannelsEntry 2}
+
+
+
+ acPMMulticastRegisteredChannelsAverage OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Average value within the period time."
+ ::= {acPMMulticastRegisteredChannelsEntry 3}
+
+
+
+ acPMMulticastRegisteredChannelsMax OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Maximum value within the period time."
+ ::= {acPMMulticastRegisteredChannelsEntry 4}
+
+
+
+ acPMMulticastRegisteredChannelsMin OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Minimum value within the period time."
+ ::= {acPMMulticastRegisteredChannelsEntry 5}
+
+
+
+ acPMMulticastRegisteredChannelsVolume OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Activity volume."
+ ::= {acPMMulticastRegisteredChannelsEntry 6}
+
+
+
+ acPMMulticastRegisteredChannelsTimeBelowLowThreshold OBJECT-TYPE
+ SYNTAX Integer32 (-1..100)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Percent of interval time for which gauge is below what was determined
+as the low threshold."
+ ::= {acPMMulticastRegisteredChannelsEntry 7}
+
+
+
+ acPMMulticastRegisteredChannelsTimeBetweenThresholds OBJECT-TYPE
+ SYNTAX Integer32 (-1..100)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Percent of interval time for which gauge is above what was determined
+as the high threshold."
+ ::= {acPMMulticastRegisteredChannelsEntry 8}
+
+
+
+ acPMMulticastRegisteredChannelsTimeAboveHighThreshold OBJECT-TYPE
+ SYNTAX Integer32 (-1..100)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Percent of interval time for which gauge is between what were
+determined as the low and high thresholds."
+ ::= {acPMMulticastRegisteredChannelsEntry 9}
+
+
+
+ acPMMulticastRegisteredChannelsFullDayAverage OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The average of full 24 hours."
+ ::= {acPMMulticastRegisteredChannelsEntry 10}
+
+
+
+ -- ****************************************
+ -- acPMModemRelayActiveChannels table declaration
+ -- ****************************************
+ acPMModemRelayActiveChannelsTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AcPMModemRelayActiveChannelsEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Number of active modem relay (V150.1) channels."
+ ::= {acPMChannelUtilization 7}
+
+
+
+ -- ****************************************
+ -- acPMModemRelayActiveChannels table entry
+ -- ****************************************
+ acPMModemRelayActiveChannelsEntry OBJECT-TYPE
+ SYNTAX AcPMModemRelayActiveChannelsEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ ""
+ INDEX {acPMModemRelayActiveChannelsInterval}
+ ::= {acPMModemRelayActiveChannelsTable 1}
+
+
+
+ -- ****************************************
+ -- acPMModemRelayActiveChannels TABLE
+ -- ****************************************
+ AcPMModemRelayActiveChannelsEntry ::= SEQUENCE {
+ acPMModemRelayActiveChannelsInterval Unsigned32,
+ acPMModemRelayActiveChannelsVal Gauge32,
+ acPMModemRelayActiveChannelsAverage Integer32,
+ acPMModemRelayActiveChannelsMax Integer32,
+ acPMModemRelayActiveChannelsMin Integer32,
+ acPMModemRelayActiveChannelsVolume Counter32,
+ acPMModemRelayActiveChannelsTimeBelowLowThreshold
+ Integer32,
+ acPMModemRelayActiveChannelsTimeBetweenThresholds
+ Integer32,
+ acPMModemRelayActiveChannelsTimeAboveHighThreshold
+ Integer32,
+ acPMModemRelayActiveChannelsFullDayAverage Integer32
+ }
+
+
+
+ acPMModemRelayActiveChannelsInterval OBJECT-TYPE
+ SYNTAX Unsigned32 (0..2)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Interval index.
+0 - current period (incomplete monitoring - mid period).
+1 - Last full period.
+2 - One before last."
+ ::= {acPMModemRelayActiveChannelsEntry 1}
+
+
+
+ acPMModemRelayActiveChannelsVal OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Value of gauge or counter."
+ ::= {acPMModemRelayActiveChannelsEntry 2}
+
+
+
+ acPMModemRelayActiveChannelsAverage OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Average value within the period time."
+ ::= {acPMModemRelayActiveChannelsEntry 3}
+
+
+
+ acPMModemRelayActiveChannelsMax OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Maximum value within the period time."
+ ::= {acPMModemRelayActiveChannelsEntry 4}
+
+
+
+ acPMModemRelayActiveChannelsMin OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Minimum value within the period time."
+ ::= {acPMModemRelayActiveChannelsEntry 5}
+
+
+
+ acPMModemRelayActiveChannelsVolume OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Activity volume."
+ ::= {acPMModemRelayActiveChannelsEntry 6}
+
+
+
+ acPMModemRelayActiveChannelsTimeBelowLowThreshold OBJECT-TYPE
+ SYNTAX Integer32 (-1..100)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Percent of interval time for which gauge is below what was determined
+as the low threshold."
+ ::= {acPMModemRelayActiveChannelsEntry 7}
+
+
+
+ acPMModemRelayActiveChannelsTimeBetweenThresholds OBJECT-TYPE
+ SYNTAX Integer32 (-1..100)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Percent of interval time for which gauge is above what was determined
+as the high threshold."
+ ::= {acPMModemRelayActiveChannelsEntry 8}
+
+
+
+ acPMModemRelayActiveChannelsTimeAboveHighThreshold OBJECT-TYPE
+ SYNTAX Integer32 (-1..100)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Percent of interval time for which gauge is between what were
+determined as the low and high thresholds."
+ ::= {acPMModemRelayActiveChannelsEntry 9}
+
+
+
+ acPMModemRelayActiveChannelsFullDayAverage OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The average of full 24 hours."
+ ::= {acPMModemRelayActiveChannelsEntry 10}
+
+
+
+ acPMStreamingCache OBJECT IDENTIFIER ::= {acPMMediaData 42}
+
+
+ -- ****************************************
+ -- acPMStreamingCacheHitRate table declaration
+ -- ****************************************
+ acPMStreamingCacheHitRateTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AcPMStreamingCacheHitRateEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Hit count rate of streaming cache"
+ ::= {acPMStreamingCache 1}
+
+
+
+ -- ****************************************
+ -- acPMStreamingCacheHitRate table entry
+ -- ****************************************
+ acPMStreamingCacheHitRateEntry OBJECT-TYPE
+ SYNTAX AcPMStreamingCacheHitRateEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ ""
+ INDEX {acPMStreamingCacheHitRateInterval}
+ ::= {acPMStreamingCacheHitRateTable 1}
+
+
+
+ -- ****************************************
+ -- acPMStreamingCacheHitRate TABLE
+ -- ****************************************
+ AcPMStreamingCacheHitRateEntry ::= SEQUENCE {
+ acPMStreamingCacheHitRateInterval Unsigned32,
+ acPMStreamingCacheHitRateAverage Integer32,
+ acPMStreamingCacheHitRateMax Integer32,
+ acPMStreamingCacheHitRateMin Integer32,
+ acPMStreamingCacheHitRateVolume Counter32,
+ acPMStreamingCacheHitRateTimeBelowLowThreshold Integer32,
+ acPMStreamingCacheHitRateTimeBetweenThresholds Integer32,
+ acPMStreamingCacheHitRateTimeAboveHighThreshold Integer32,
+ acPMStreamingCacheHitRateFullDayAverage Integer32
+ }
+
+
+
+ acPMStreamingCacheHitRateInterval OBJECT-TYPE
+ SYNTAX Unsigned32 (0..2)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Interval index.
+0 - current period (incomplete monitoring - mid period).
+1 - Last full period.
+2 - One before last."
+ ::= {acPMStreamingCacheHitRateEntry 1}
+
+
+
+ acPMStreamingCacheHitRateAverage OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Average value within the period time."
+ ::= {acPMStreamingCacheHitRateEntry 2}
+
+
+
+ acPMStreamingCacheHitRateMax OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Maximum value within the period time."
+ ::= {acPMStreamingCacheHitRateEntry 3}
+
+
+
+ acPMStreamingCacheHitRateMin OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Minimum value within the period time."
+ ::= {acPMStreamingCacheHitRateEntry 4}
+
+
+
+ acPMStreamingCacheHitRateVolume OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Activity volume."
+ ::= {acPMStreamingCacheHitRateEntry 5}
+
+
+
+ acPMStreamingCacheHitRateTimeBelowLowThreshold OBJECT-TYPE
+ SYNTAX Integer32 (-1..100)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Percent of interval time for which gauge is below what was determined
+as the low threshold."
+ ::= {acPMStreamingCacheHitRateEntry 6}
+
+
+
+ acPMStreamingCacheHitRateTimeBetweenThresholds OBJECT-TYPE
+ SYNTAX Integer32 (-1..100)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Percent of interval time for which gauge is above what was determined
+as the high threshold."
+ ::= {acPMStreamingCacheHitRateEntry 7}
+
+
+
+ acPMStreamingCacheHitRateTimeAboveHighThreshold OBJECT-TYPE
+ SYNTAX Integer32 (-1..100)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Percent of interval time for which gauge is between what were
+determined as the low and high thresholds."
+ ::= {acPMStreamingCacheHitRateEntry 8}
+
+
+
+ acPMStreamingCacheHitRateFullDayAverage OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The average of full 24 hours."
+ ::= {acPMStreamingCacheHitRateEntry 9}
+
+
+
+ -- ****************************************
+ -- acPMStreamingCacheMissRate table declaration
+ -- ****************************************
+ acPMStreamingCacheMissRateTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AcPMStreamingCacheMissRateEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Miss count rate of streaming cache"
+ ::= {acPMStreamingCache 2}
+
+
+
+ -- ****************************************
+ -- acPMStreamingCacheMissRate table entry
+ -- ****************************************
+ acPMStreamingCacheMissRateEntry OBJECT-TYPE
+ SYNTAX AcPMStreamingCacheMissRateEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ ""
+ INDEX {acPMStreamingCacheMissRateInterval}
+ ::= {acPMStreamingCacheMissRateTable 1}
+
+
+
+ -- ****************************************
+ -- acPMStreamingCacheMissRate TABLE
+ -- ****************************************
+ AcPMStreamingCacheMissRateEntry ::= SEQUENCE {
+ acPMStreamingCacheMissRateInterval Unsigned32,
+ acPMStreamingCacheMissRateAverage Integer32,
+ acPMStreamingCacheMissRateMax Integer32,
+ acPMStreamingCacheMissRateMin Integer32,
+ acPMStreamingCacheMissRateVolume Counter32,
+ acPMStreamingCacheMissRateTimeBelowLowThreshold Integer32,
+ acPMStreamingCacheMissRateTimeBetweenThresholds Integer32,
+ acPMStreamingCacheMissRateTimeAboveHighThreshold
+ Integer32,
+ acPMStreamingCacheMissRateFullDayAverage Integer32
+ }
+
+
+
+ acPMStreamingCacheMissRateInterval OBJECT-TYPE
+ SYNTAX Unsigned32 (0..2)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Interval index.
+0 - current period (incomplete monitoring - mid period).
+1 - Last full period.
+2 - One before last."
+ ::= {acPMStreamingCacheMissRateEntry 1}
+
+
+
+ acPMStreamingCacheMissRateAverage OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Average value within the period time."
+ ::= {acPMStreamingCacheMissRateEntry 2}
+
+
+
+ acPMStreamingCacheMissRateMax OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Maximum value within the period time."
+ ::= {acPMStreamingCacheMissRateEntry 3}
+
+
+
+ acPMStreamingCacheMissRateMin OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Minimum value within the period time."
+ ::= {acPMStreamingCacheMissRateEntry 4}
+
+
+
+ acPMStreamingCacheMissRateVolume OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Activity volume."
+ ::= {acPMStreamingCacheMissRateEntry 5}
+
+
+
+ acPMStreamingCacheMissRateTimeBelowLowThreshold OBJECT-TYPE
+ SYNTAX Integer32 (-1..100)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Percent of interval time for which gauge is below what was determined
+as the low threshold."
+ ::= {acPMStreamingCacheMissRateEntry 6}
+
+
+
+ acPMStreamingCacheMissRateTimeBetweenThresholds OBJECT-TYPE
+ SYNTAX Integer32 (-1..100)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Percent of interval time for which gauge is above what was determined
+as the high threshold."
+ ::= {acPMStreamingCacheMissRateEntry 7}
+
+
+
+ acPMStreamingCacheMissRateTimeAboveHighThreshold OBJECT-TYPE
+ SYNTAX Integer32 (-1..100)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Percent of interval time for which gauge is between what were
+determined as the low and high thresholds."
+ ::= {acPMStreamingCacheMissRateEntry 8}
+
+
+
+ acPMStreamingCacheMissRateFullDayAverage OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The average of full 24 hours."
+ ::= {acPMStreamingCacheMissRateEntry 9}
+
+
+
+ -- ****************************************
+ -- acPMStreamingCacheServerRequestsRate table declaration
+ -- ****************************************
+ acPMStreamingCacheServerRequestsRateTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AcPMStreamingCacheServerRequestsRateEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Server requests count rate of streaming cache"
+ ::= {acPMStreamingCache 3}
+
+
+
+ -- ****************************************
+ -- acPMStreamingCacheServerRequestsRate table entry
+ -- ****************************************
+ acPMStreamingCacheServerRequestsRateEntry OBJECT-TYPE
+ SYNTAX AcPMStreamingCacheServerRequestsRateEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ ""
+ INDEX {acPMStreamingCacheServerRequestsRateInterval}
+ ::= {acPMStreamingCacheServerRequestsRateTable 1}
+
+
+
+ -- ****************************************
+ -- acPMStreamingCacheServerRequestsRate TABLE
+ -- ****************************************
+ AcPMStreamingCacheServerRequestsRateEntry ::= SEQUENCE {
+ acPMStreamingCacheServerRequestsRateInterval Unsigned32,
+ acPMStreamingCacheServerRequestsRateAverage Integer32,
+ acPMStreamingCacheServerRequestsRateMax Integer32,
+ acPMStreamingCacheServerRequestsRateMin Integer32,
+ acPMStreamingCacheServerRequestsRateVolume Counter32,
+ acPMStreamingCacheServerRequestsRateTimeBelowLowThreshold
+ Integer32,
+ acPMStreamingCacheServerRequestsRateTimeBetweenThresholds
+ Integer32,
+ acPMStreamingCacheServerRequestsRateTimeAboveHighThreshold
+ Integer32,
+ acPMStreamingCacheServerRequestsRateFullDayAverage
+ Integer32
+ }
+
+
+
+ acPMStreamingCacheServerRequestsRateInterval OBJECT-TYPE
+ SYNTAX Unsigned32 (0..2)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Interval index.
+0 - current period (incomplete monitoring - mid period).
+1 - Last full period.
+2 - One before last."
+ ::= {acPMStreamingCacheServerRequestsRateEntry 1}
+
+
+
+ acPMStreamingCacheServerRequestsRateAverage OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Average value within the period time."
+ ::= {acPMStreamingCacheServerRequestsRateEntry 2}
+
+
+
+ acPMStreamingCacheServerRequestsRateMax OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Maximum value within the period time."
+ ::= {acPMStreamingCacheServerRequestsRateEntry 3}
+
+
+
+ acPMStreamingCacheServerRequestsRateMin OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Minimum value within the period time."
+ ::= {acPMStreamingCacheServerRequestsRateEntry 4}
+
+
+
+ acPMStreamingCacheServerRequestsRateVolume OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Activity volume."
+ ::= {acPMStreamingCacheServerRequestsRateEntry 5}
+
+
+
+ acPMStreamingCacheServerRequestsRateTimeBelowLowThreshold OBJECT-TYPE
+ SYNTAX Integer32 (-1..100)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Percent of interval time for which gauge is below what was determined
+as the low threshold."
+ ::= {acPMStreamingCacheServerRequestsRateEntry 6}
+
+
+
+ acPMStreamingCacheServerRequestsRateTimeBetweenThresholds OBJECT-TYPE
+ SYNTAX Integer32 (-1..100)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Percent of interval time for which gauge is above what was determined
+as the high threshold."
+ ::= {acPMStreamingCacheServerRequestsRateEntry 7}
+
+
+
+ acPMStreamingCacheServerRequestsRateTimeAboveHighThreshold OBJECT-TYPE
+ SYNTAX Integer32 (-1..100)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Percent of interval time for which gauge is between what were
+determined as the low and high thresholds."
+ ::= {acPMStreamingCacheServerRequestsRateEntry 8}
+
+
+
+ acPMStreamingCacheServerRequestsRateFullDayAverage OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The average of full 24 hours."
+ ::= {acPMStreamingCacheServerRequestsRateEntry 9}
+
+
+
+ acPMModemRelay OBJECT IDENTIFIER ::= {acPMMediaData 43}
+
+
+ -- ****************************************
+ -- acPMModemRelaySessionRequests table declaration
+ -- ****************************************
+ acPMModemRelaySessionRequestsTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AcPMModemRelaySessionRequestsEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Number of modem relay (V150.1) session requests."
+ ::= {acPMModemRelay 1}
+
+
+
+ -- ****************************************
+ -- acPMModemRelaySessionRequests table entry
+ -- ****************************************
+ acPMModemRelaySessionRequestsEntry OBJECT-TYPE
+ SYNTAX AcPMModemRelaySessionRequestsEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ ""
+ INDEX {acPMModemRelaySessionRequestsInterval}
+ ::= {acPMModemRelaySessionRequestsTable 1}
+
+
+
+ -- ****************************************
+ -- acPMModemRelaySessionRequests TABLE
+ -- ****************************************
+ AcPMModemRelaySessionRequestsEntry ::= SEQUENCE {
+ acPMModemRelaySessionRequestsInterval Unsigned32,
+ acPMModemRelaySessionRequestsAverage Integer32,
+ acPMModemRelaySessionRequestsMax Integer32,
+ acPMModemRelaySessionRequestsMin Integer32,
+ acPMModemRelaySessionRequestsVal Gauge32,
+ acPMModemRelaySessionRequestsFullDayAverage Integer32
+ }
+
+
+
+ acPMModemRelaySessionRequestsInterval OBJECT-TYPE
+ SYNTAX Unsigned32 (0..2)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Interval index.
+0 - current period (incomplete monitoring - mid period).
+1 - Last full period.
+2 - One before last."
+ ::= {acPMModemRelaySessionRequestsEntry 1}
+
+
+
+ acPMModemRelaySessionRequestsAverage OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Average value within the period time."
+ ::= {acPMModemRelaySessionRequestsEntry 2}
+
+
+
+ acPMModemRelaySessionRequestsMax OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Maximum value within the period time."
+ ::= {acPMModemRelaySessionRequestsEntry 3}
+
+
+
+ acPMModemRelaySessionRequestsMin OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Minimum value within the period time."
+ ::= {acPMModemRelaySessionRequestsEntry 4}
+
+
+
+ acPMModemRelaySessionRequestsVal OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Value of gauge or counter."
+ ::= {acPMModemRelaySessionRequestsEntry 5}
+
+
+
+ acPMModemRelaySessionRequestsFullDayAverage OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The average of full 24 hours."
+ ::= {acPMModemRelaySessionRequestsEntry 6}
+
+
+
+ -- ****************************************
+ -- acPMModemRelaySessionRejections table declaration
+ -- ****************************************
+ acPMModemRelaySessionRejectionsTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AcPMModemRelaySessionRejectionsEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Number of modem relay (V150.1) session rejections due to lack of resources."
+ ::= {acPMModemRelay 2}
+
+
+
+ -- ****************************************
+ -- acPMModemRelaySessionRejections table entry
+ -- ****************************************
+ acPMModemRelaySessionRejectionsEntry OBJECT-TYPE
+ SYNTAX AcPMModemRelaySessionRejectionsEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ ""
+ INDEX {acPMModemRelaySessionRejectionsInterval}
+ ::= {acPMModemRelaySessionRejectionsTable 1}
+
+
+
+ -- ****************************************
+ -- acPMModemRelaySessionRejections TABLE
+ -- ****************************************
+ AcPMModemRelaySessionRejectionsEntry ::= SEQUENCE {
+ acPMModemRelaySessionRejectionsInterval Unsigned32,
+ acPMModemRelaySessionRejectionsAverage Integer32,
+ acPMModemRelaySessionRejectionsMax Integer32,
+ acPMModemRelaySessionRejectionsMin Integer32,
+ acPMModemRelaySessionRejectionsVal Gauge32,
+ acPMModemRelaySessionRejectionsTimeBetweenThresholds
+ Integer32,
+ acPMModemRelaySessionRejectionsTimeAboveHighThreshold
+ Integer32,
+ acPMModemRelaySessionRejectionsFullDayAverage Integer32
+ }
+
+
+
+ acPMModemRelaySessionRejectionsInterval OBJECT-TYPE
+ SYNTAX Unsigned32 (0..2)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Interval index.
+0 - current period (incomplete monitoring - mid period).
+1 - Last full period.
+2 - One before last."
+ ::= {acPMModemRelaySessionRejectionsEntry 1}
+
+
+
+ acPMModemRelaySessionRejectionsAverage OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Average value within the period time."
+ ::= {acPMModemRelaySessionRejectionsEntry 2}
+
+
+
+ acPMModemRelaySessionRejectionsMax OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Maximum value within the period time."
+ ::= {acPMModemRelaySessionRejectionsEntry 3}
+
+
+
+ acPMModemRelaySessionRejectionsMin OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Minimum value within the period time."
+ ::= {acPMModemRelaySessionRejectionsEntry 4}
+
+
+
+ acPMModemRelaySessionRejectionsVal OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Value of gauge or counter."
+ ::= {acPMModemRelaySessionRejectionsEntry 5}
+
+
+
+ acPMModemRelaySessionRejectionsTimeBetweenThresholds OBJECT-TYPE
+ SYNTAX Integer32 (-1..100)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Percent of interval time for which gauge is above what was determined
+as the high threshold."
+ ::= {acPMModemRelaySessionRejectionsEntry 6}
+
+
+
+ acPMModemRelaySessionRejectionsTimeAboveHighThreshold OBJECT-TYPE
+ SYNTAX Integer32 (-1..100)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Percent of interval time for which gauge is between what were
+determined as the low and high thresholds."
+ ::= {acPMModemRelaySessionRejectionsEntry 7}
+
+
+
+ acPMModemRelaySessionRejectionsFullDayAverage OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The average of full 24 hours."
+ ::= {acPMModemRelaySessionRejectionsEntry 8}
+
+
+
+
+
+END
|