diff options
Diffstat (limited to 'MIBS/arris/d5/ARRIS-D5-VIDEO-MIB')
| -rw-r--r-- | MIBS/arris/d5/ARRIS-D5-VIDEO-MIB | 4341 |
1 files changed, 4341 insertions, 0 deletions
diff --git a/MIBS/arris/d5/ARRIS-D5-VIDEO-MIB b/MIBS/arris/d5/ARRIS-D5-VIDEO-MIB new file mode 100644 index 0000000..d74714f --- /dev/null +++ b/MIBS/arris/d5/ARRIS-D5-VIDEO-MIB @@ -0,0 +1,4341 @@ +ARRIS-D5-VIDEO-MIB DEFINITIONS ::= BEGIN + +IMPORTS + enterprises, MODULE-IDENTITY, OBJECT-TYPE, Unsigned32, + Counter32, Gauge32, IpAddress + FROM SNMPv2-SMI + TEXTUAL-CONVENTION, TruthValue, RowStatus, DisplayString, + TimeStamp, DateAndTime + FROM SNMPv2-TC + OBJECT-GROUP, MODULE-COMPLIANCE + FROM SNMPv2-CONF + ifIndex, InterfaceIndex, InterfaceIndexOrZero + FROM IF-MIB + arrisD5UEQam + FROM ARRIS-MIB; + + d5MpegVideoMIB MODULE-IDENTITY + LAST-UPDATED "201001050000Z" -- 4th January 2010 + ORGANIZATION "Arris International" + CONTACT-INFO + " Network Management + Postal: Arris International. + 4300 Cork Airport Business Park + Cork Airport, Kinsale Road + Cork, Ireland. + Tel: +353 21 7305 800 + Fax: +353 21 4321 972" + + DESCRIPTION + "This MIB manages the MPEG / VIDEO software on the Arris CMTS." + ::= { arrisD5UEQam 1 } + + d5VideoObjects OBJECT IDENTIFIER ::= { d5MpegVideoMIB 1 } + + D5TransportStreamIndex ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "An identifier that uniquely identifies an MPEG Transport Stream in + the D5 MPEG Manager. This could represent an incoming or outgoing + TS, or could represent an SPTS or MPTS." + SYNTAX INTEGER ( 1..65535 ) + + D5ElementaryStreamType ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "A convenient type definition for MPEG Elementary Stream Type + values." + SYNTAX INTEGER ( 1..255 ) + + D5DescriptorTag ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "A convenient type definition for MPEG Descriptor Tags values." + SYNTAX INTEGER ( 1..255 ) + + D5DescriptorIndex ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "An identifier that uniquely identifies an MPEG Descriptor within a + given Program or Elementary Stream." + SYNTAX INTEGER ( 1..65535 ) + + D5DescriptorBuffer ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "A buffer that contains MPEG Descriptor data." + SYNTAX OCTET STRING (SIZE (0..255)) + + D5PID ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "A convenient type definition for MPEG PID values." + SYNTAX INTEGER ( 0..8192 ) + + D5Program ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "A convenient type definition for MPEG Program Number values." + SYNTAX Unsigned32 + + D5MappingType ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "A convenient type definition for mapping rules. These can be as + follows + static - configured by the operator to over-ride the default + mapping + dynamic - allocated by Q5 on the fly and currently in operation + default - representing the default rule but not in operation." + SYNTAX INTEGER { + default(1), + dynamic(2), + static(3) + } + + D5PidType ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "A convenient type definition for PID - whether PSI or ES." + SYNTAX INTEGER { + es(1), + psi(2), + ghost(3) + } + + D5ProgType ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "A convenient type definition for Programs - whether PSI or ES." + SYNTAX INTEGER { + es(1), + psi(2) + } + + D5RemappingRuleSourceType ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "A convenient type definition for the source of rule used to create + a dynamic PID/PROG remapping + qam - A Qam remap rule was used to create the remapping + udpIp - A Udp/IP rule was used to create the remapping + nsg - Remapping was made by NSG mode default rules + passThrough - Remapping was made by passThrough mode default + rules + default - Remapping was made by arris mode default rules" + + SYNTAX INTEGER { + qam(1), + udpIp(2), + nsg(3), + passThrough(4), + default(5) + } + + D5TransportStreamStatus ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "A convenient type definition for MPEG transport stream status + states. These can be as follows + active - currently passing video traffic + timedOut - No video passing currently, in transition from + active to inactive states + inactive - not passing ANY traffic - used for statically + configured streams" + SYNTAX INTEGER { + active(1), + timingOut(2), + inactive(3) + } + + D5PidStatus ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "A convenient type definition for MPEG PID status states. These can + be as follows + active - currently passing video traffic + timedOut - No video passing currently, in transition from + active to inactive states + inactive - not passing ANY traffic - used for statically + configured PIDs" + SYNTAX INTEGER { + active(1), + timingOut(2), + inactive(3) + } + + D5ProgStatus ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "A convenient type definition for MPEG Program status states. These + can be as follows + active - currently passing video traffic + timedOut - No video passing currently, in transition from + active to inactive states + inactive - not passing ANY traffic - used for statically + configured programs" + SYNTAX INTEGER { + active(1), + timingOut(2), + inactive(3) + } + + D5TransportStreamDirection ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "A convenient type definition for the direction of a Transport + Stream + incoming - the Transport Stream is being received by the D5, + typically over IP + outgoing - the Transport Stream is being generated by the D5 and + sent to a QAM." + SYNTAX INTEGER { + incoming(1), + outgoing(2) + } + + D5VideoChannelContainerNameType ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "A unique name that identifies a particular channel-container." + SYNTAX DisplayString (SIZE (0..16)) + + D5VideoDefaultMappingScheme ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "A convenient type definition for the default-mappings that are + supported by the D5. The default-mapping schemes are used to + identify which QAM to map an input TS to, where the TS has no + static configuration associated with it. + udpPortLegacy - The earlier version of the Arris default UDP- + port mapping scheme may used to map a TS to an output + QAM channel. Each QAM channel has a pre-defined + associated range of UDP-ports which map to specific + program-numbers on that QAM channel. + udpPort - The Arris default UDP-port mapping scheme is used + to map a TS to an output QAM channel. Each QAM + channel has a pre-defined associated range of UDP- + ports which map to specific program-numbers on that + QAM channel. + disabled - The default mapping schemes are disabled. Only video + streams that are statically configured can pass + through the D5." + SYNTAX INTEGER { + disabled(1), + udpPort(2), + udpPortLegacy(3) + } + + D5PersistenceType ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "A convenient type definition that defines whether or not a rule + should be saved persistently across system reboots." + SYNTAX INTEGER { + nonVolatile(0), + volatile(1) + } + + D5VideoQamLogQamState ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Defines the status of the log entry: + one-shot Log entry describes a one off event (no START/STOP + attributes) + active Log entry is currently active. This means that the + START event has occured and the STOP event is + pending + complete Both the START and STOP events for this log entry + have fired" + SYNTAX INTEGER { + one-shot(1), + active(2), + complete(3) + } + + D5VideoProgramOverSubscriptionAction ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Defines the status of the log entry: + none No action is performed, program monitoring is not + enabled. + notification An event is logged indicating that the program + has exceeded it's bandwidth. + recover Action will be taken to recover the bandwidth in + questions. Typically the program will be removed." + SYNTAX INTEGER { + none(0), + notification(1), + recover(2) + } + + D5GeneratePat ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Defines the controls on the PAT generation: + enable-auto Enable the auto-generation of the PAT table + disable Disable to local generation of the PAT table + force-nit-entry Enable the auto-generation of the PAT table but + force the NIT entry (i.e. program_number '0') + to the value specified by the 'nit-pid' + configuration. This is used for video-si + streams, where the egress NIT PID defaults + to that specified in the ingress PAT." + SYNTAX INTEGER { + enable-auto(1), + disable(2), + force-nit-entry(3) + } + +-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- +-- Global MPEG Processing configuration settings including defaults for qams +-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- + d5VideoControlGroup OBJECT IDENTIFIER ::= { d5VideoObjects 1 } + d5vControlPatInterval OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Retransmission interval for PAT tables in milliseconds." + ::= { d5VideoControlGroup 1 } + + d5vControlPmtInterval OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Retransmission interval for PMT tables in milliseconds." + ::= { d5VideoControlGroup 2 } + + d5vControlNitInterval OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Retransmission interval for NIT tables in milliseconds." + ::= { d5VideoControlGroup 3 } + + d5vControlSdtInterval OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Retransmission interval for SDT tables in milliseconds." + ::= { d5VideoControlGroup 4 } + + d5vControlOriginalNetworkId OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "DVB original-network-id to be used in downstream ." + ::= { d5VideoControlGroup 5 } + + d5vControlNetworkId OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "DVB network-id to be used in downstream ." + ::= { d5VideoControlGroup 6 } + + d5vControlNetworkName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "DVB network-name to be used in downstream ." + ::= { d5VideoControlGroup 7 } + + d5vControlTimeoutInterval OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Timeout interval for incoming streams in milliseconds." + ::= { d5VideoControlGroup 8 } + + d5vControlNitPID OBJECT-TYPE + SYNTAX D5PID + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "PID value to use when generating NIT tables." + ::= { d5VideoControlGroup 9 } + + d5vControlAutoGeneratePAT OBJECT-TYPE + SYNTAX D5GeneratePat + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Flag specifying whether or not the auto-generation by the + D5 of PAT tables is enabled" + ::= { d5VideoControlGroup 10 } + + d5vControlAutoGenerateCAT OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Flag specifying whether or not the auto-generation by the + D5 of CAT tables is enabled" + ::= { d5VideoControlGroup 11 } + + d5vControlAutoGeneratePMT OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Flag specifying whether or not the auto-generation by the + D5 of PMT tables is enabled" + ::= { d5VideoControlGroup 12 } + + d5vControlAutoGenerateNIT OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Flag specifying whether or not the auto-generation by the + D5 of NIT tables is enabled(and the associated entry + in the PAT table for the NIT-PID)" + ::= { d5VideoControlGroup 13 } + + d5vControlAutoGenerateSDT OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Flag specifying whether or not the auto-generation by the + D5 of SDT tables is enabled" + ::= { d5VideoControlGroup 14 } + + d5vControlAutoGenerateTDT OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Flag specifying whether or not the auto-generation by the + D5 of TDT tables is enabled" + ::= { d5VideoControlGroup 15 } + + d5vControlAutoGenerateTOT OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Flag specifying whether or not the auto-generation by the + D5 of TOT tables is enabled" + ::= { d5VideoControlGroup 16 } + + d5vControlPassThroughType OBJECT-TYPE + SYNTAX INTEGER { + on(1), + off(2), + mpts(3) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This can be used to disable the default Arris prog/pid + remapping scheme, and use pass-through remapping instead. + Can also be used to enable MPTS-pass-through mode. + " + ::= { d5VideoControlGroup 17 } + + d5vControlCatInterval OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Retransmission interval for CAT tables in milliseconds." + ::= { d5VideoControlGroup 18 } + + d5vControlMaxProgramsPerQamChannel OBJECT-TYPE + SYNTAX Unsigned32 (0..63) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Maximum number of programs allowed on a Qam channel at any + one time.(Some QAM H/W may restrict to 31) + " + ::= { d5VideoControlGroup 19 } + + d5vControlAllowEsDvbPids OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Flag that determines whether or not DVB-reserved PIDS are + allowed to be used for elementary-streams." + ::= { d5VideoControlGroup 20 } + + d5vControlDefaultMappingScheme OBJECT-TYPE + SYNTAX D5VideoDefaultMappingScheme + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The mapping scheme to be used for input transport-streams + that have no associated static-configuration." + ::= { d5VideoControlGroup 21 } + + d5vControlFastPsiTableUpdates OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "If this is set to TRUE, then PSI table updates are sent + down the RF as soon as the new PSI table has been + calculated. Otherwise, PSI table updates are made in such + a way that the repetition interval for that table on the + RF remains constant." + ::= { d5VideoControlGroup 22 } + + d5vControlCycleOutputPids OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "If this is set to TRUE, then the D5 cycles through the pool + of unused PIDs when creating new PID remappings. The + purpose of this is to limit the amound of PID reusage E.g. + if a set-top using a buffered PMT table to view a program + where the program may have been deleted and the PIDs may be + in use by a different program now." + ::= { d5VideoControlGroup 23 } + + d5vControlOverSubscriptionSafetyMargin OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The amount of bandwidth in Kbps for the D5 to maintain + as unused bandwidth on each QAM. Purpose of this being + to help prevent over-subscription from occuring at the + cost of some wasted bandwidth." + ::= { d5VideoControlGroup 24 } + + d5vControlOverSubscriptionRecoveryEnabled OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "If this is set to TRUE, then the D5 will attempt to + recover automatically from a QAM-overscribed condition by + shutting down active programs selectively. It selects + which programs to shut down by order of most recently + activated, checks the new bitrates, then continues to + shutdown more programs as neccessary untill the total + bandwidth fits within the QAM available bandwidth." + ::= { d5VideoControlGroup 25 } + + d5vControlFilterCaDescMode OBJECT-TYPE + SYNTAX INTEGER { + cat-and-pmt(1), + neither(2), + cat-only(3), + pmt-only(4) + } + + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "If this is configured, then the D5 will remove + CA_Descriptors from incoming streams. This includes + descriptors in CAT and PMT tables, and in the case of + PMT it includes the 1st and 2nd loop. This is set to + 'neither' by default." + ::= { d5VideoControlGroup 26 } + + d5vControlAllowTsidDuplication OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "If this is set to TRUE, then the D5 chassis can be + configured with identical TSIDs on multiple QAM channels + . Duplicate TSIDs should be used with some caution + because the use of such is not currently compatible with + conditional-access encryption, channel-container + replication, or PSIG generation. This is set to FALSE by + default. + " + ::= { d5VideoControlGroup 27 } + + d5vControlPcrDriftCorrection OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS deprecated + DESCRIPTION + "If this is set to TRUE, then PCR drift correction of input + MPEG streams is enabled on the resultant output stream. + Otherwise, the functionality is disabled." + ::= { d5VideoControlGroup 28 } + + d5vControlProgramOverSubscription OBJECT-TYPE + SYNTAX D5VideoProgramOverSubscriptionAction + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "If this is set to TRUE, then the D5 will attempt to + recover automatically from a QAM-overscribed condition by + shutting down active programs selectively. It selects + which programs to shut down by order of most recently + activated, checks the new bitrates, then continues to + shutdown more programs as neccessary untill the total + bandwidth fits within the QAM available bandwidth." + ::= { d5VideoControlGroup 29 } + + d5vControlProgramOverSubscriptionPeriod OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS deprecated + DESCRIPTION + "The period of time in seconds over which bandwidth + is monitored before an over-subscription action is + triggered." + ::= { d5VideoControlGroup 30 } + + d5vControlProgramOverSubscriptionThreshold OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The amount of bandwidth in percent by which a program + stream may exceed it's configured limit before triggering + the action specified by d5vControlProgramOverSubscription." + ::= { d5VideoControlGroup 31 } + + d5vControlPreEncDetect OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "If this is set to TRUE, then the D5 will detect Motorola + pre-encrypted streams, and will avoid re-encrypting the + traffic when forwarding it downstream. If set to TRUE, + the d5vControlFilterCaDesc setting is ignored for any + pre-encrypted streams that match this rule, because the + stream could not otherwise be decrypted." + ::= { d5VideoControlGroup 32 } + + d5vControlUtilPercentThresh OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The percentage utilization threshold of the QAM bandwidth + at which the D5 will generate an alarm. The purpose of this + is to facilitate monitoring of QAM bandwidth where the QAM + might not necessarily be oversubscribed. + " + ::= { d5VideoControlGroup 33 } + + d5vControlDefaultPidMappingProgramStart OBJECT-TYPE + SYNTAX Unsigned32 (1..65535) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The starting program-number to map to the start of the default + mapping pid range. + " + ::= { d5VideoControlGroup 34 } + + d5vControlDefaultPidMappingProgramCount OBJECT-TYPE + SYNTAX Unsigned32 (1..2048) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The number of programs to use for the default pid range. + " + ::= { d5VideoControlGroup 35 } + + d5vControlDefaultPidMappingPidCount OBJECT-TYPE + SYNTAX Unsigned32 (2..31) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The number of PIDs to use per-program. Determines the + PID offset for each program number in the default range. + There is a legal limit of 4096 on the values of + d5vControlDefaultPidMappingProgramCount multiplied by + d5vControlDefaultPidMappingPidCount. + " + ::= { d5VideoControlGroup 36 } + + d5vControlOnProgramConflictDisconnectOlderStream OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "If enabled, program conflicts trigger the older of the two + streams to be disconnected. I.E. the newer stream takes + the program number. + NOTE: this only affects streams which have the same + destination udp&IP values, and differ by source-IP. + " + ::= { d5VideoControlGroup 37 } + + d5vControlPcrDriftCorrectionGain OBJECT-TYPE + SYNTAX Unsigned32(0..10000) + UNITS "1/10000" + MAX-ACCESS read-write + STATUS deprecated + DESCRIPTION + "Gain-control used in PCR-drift calculation. In units of + 1/10000." + ::= { d5VideoControlGroup 38 } + + d5vControlPcrDriftCorrectionUpperThreshold OBJECT-TYPE + SYNTAX Unsigned32(0..10000) + UNITS "1/10 milliseconds" + MAX-ACCESS read-write + STATUS deprecated + DESCRIPTION + "Upper-threshold used in PCR-drift calculation. In units of + tenths of milliseconds." + ::= { d5VideoControlGroup 39 } + + d5vControlPcrDriftCorrectionLowerThreshold OBJECT-TYPE + SYNTAX Unsigned32(0..1000) + UNITS "1/10 milliseconds" + MAX-ACCESS read-write + STATUS deprecated + DESCRIPTION + "Lower-threshold used in PCR-drift calculation. In units of + tenths of milliseconds." + ::= { d5VideoControlGroup 40 } + + d5vControlNullDroppingRate OBJECT-TYPE + SYNTAX Unsigned32(0..7500) + UNITS "Kbps" + MAX-ACCESS read-write + STATUS deprecated + DESCRIPTION + "The rate used when performing NULL packet dropping. + In units of Kbps - setting will be rounded up + to the nearest 150 Kbps multiple" + ::= { d5VideoControlGroup 41 } + +-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- +-- QAM table (root of outgoing transport-streams in the MIB) +-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- + d5VideoQamStreamTable OBJECT-TYPE + SYNTAX SEQUENCE OF D5VideoQamStreamEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table stores MPEG Video related data on a per QAM channel + basis. Ultimately this table will AUGMENT that supported by the + QAM RF Manager but for the moment it is standalone but using + the same index, ifIndex" + ::= { d5VideoObjects 2 } + + d5VideoQamStreamEntry OBJECT-TYPE + SYNTAX D5VideoQamStreamEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "" + INDEX { ifIndex } + ::= { d5VideoQamStreamTable 1 } + + D5VideoQamStreamEntry ::= SEQUENCE { + d5vQamNitPID D5PID, + d5vQamTransportStreamID Unsigned32, + d5vQamTsMibIndex D5TransportStreamIndex, + d5vQamTotalPatsTx Counter32, + d5vQamTotalProgramsTx Counter32, + d5vQamCurrentProgramsTx Gauge32, + d5vQamPatInterval Unsigned32, + d5vQamPmtInterval Unsigned32, + d5vQamNitInterval Unsigned32, + d5vQamSdtInterval Unsigned32, + d5vQamOriginalNetworkId Unsigned32, + d5vQamNetworkId Unsigned32, + d5vQamNetworkName DisplayString, + d5vQamPassThroughType INTEGER, + d5vQamConfVideoSiStreamEnabled TruthValue, + d5vQamConfVideoSiStreamUdpDest Unsigned32, + d5vQamConfVideoSiStreamIpSrc IpAddress, + d5vQamConfVideoSiStreamIpDest IpAddress, + d5vQamActiveVideoSiStreamEnabled TruthValue, + d5vQamActiveVideoSiStreamUdpDest Unsigned32, + d5vQamActiveVideoSiStreamIpSrc IpAddress, + d5vQamActiveVideoSiStreamIpDest IpAddress, + d5vQamStreamStatus D5TransportStreamStatus, + d5vQamTimeActivated TimeStamp, + d5vQamTimeActive Counter32, + d5vQamTimeDeactivated TimeStamp, + d5vQamAutoGeneratePAT D5GeneratePat, + d5vQamAutoGenerateCAT TruthValue, + d5vQamAutoGeneratePMT TruthValue, + d5vQamAutoGenerateNIT TruthValue, + d5vQamAutoGenerateSDT TruthValue, + d5vQamAutoGenerateTDT TruthValue, + d5vQamAutoGenerateTOT TruthValue, + d5vQamCatInterval Unsigned32, + d5vQamMaxProgramsPerQamChannel Unsigned32, + d5vQamAllowEsDvbPids TruthValue, + d5vQamDefaultMappingScheme D5VideoDefaultMappingScheme, + d5vQamFastPsiTableUpdates TruthValue, + d5vQamCycleOutputPids TruthValue, + d5vQamOverSubscribed TruthValue, + d5vQamOverSubscriptionSafetyMargin Unsigned32, + d5vQamOverSubscriptionRecoveryEnabled TruthValue, + d5vQamFilterCaDescMode INTEGER, + d5vQamPcrDriftCorrection TruthValue, + d5vQamPreEncDetect TruthValue, + d5vQamUtilPercentThresh Unsigned32, + d5vQamOnProgramConflictDisconnectOlderStream TruthValue, + d5vQamNullDroppingRate Unsigned32, + d5vQamConfVideoSiStreamTsidRemap TruthValue + } + + d5vQamNitPID OBJECT-TYPE + SYNTAX D5PID + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The PID value to us when generating NIT tables on this QAM + channel. The default value is 16, the DVB requirement" + DEFVAL { 16 } + ::= { d5VideoQamStreamEntry 1 } + + d5vQamTransportStreamID OBJECT-TYPE + SYNTAX Unsigned32 (0..65535) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The MPEG transport_stream_id used when transmitting PAT + tables on this QAM channel. The default value is specific + to the slot number where the QAM channel is located." + ::= { d5VideoQamStreamEntry 2 } + + d5vQamTsMibIndex OBJECT-TYPE + SYNTAX D5TransportStreamIndex + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The index of the outgoing Transport Stream on this QAM + channel. A value of 0 means there are no MPEG Programs + being transmitted at present, so there will be no related + entry in the d5vTransportStreamTable." + ::= { d5VideoQamStreamEntry 3 } + + d5vQamTotalPatsTx OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of unique PAT Tables that have been + generated for this QAM channel." + ::= { d5VideoQamStreamEntry 4 } + + d5vQamTotalProgramsTx OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The accumulated number of Programs transmitted on this QAM + channel." + ::= { d5VideoQamStreamEntry 5 } + + d5vQamCurrentProgramsTx OBJECT-TYPE + SYNTAX Gauge32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of Programs currently being transmitted on this + QAM channel." + ::= { d5VideoQamStreamEntry 6 } + + d5vQamPatInterval OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Retransmission interval for PAT tables in milliseconds." + ::= { d5VideoQamStreamEntry 7 } + + d5vQamPmtInterval OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Retransmission interval for PMT tables in milliseconds." + ::= { d5VideoQamStreamEntry 8 } + + d5vQamNitInterval OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Retransmission interval for NIT tables in milliseconds." + ::= { d5VideoQamStreamEntry 9 } + + d5vQamSdtInterval OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Retransmission interval for SDT tables in milliseconds." + ::= { d5VideoQamStreamEntry 10 } + + d5vQamOriginalNetworkId OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "DVB original-network-id to be used in downstream ." + ::= { d5VideoQamStreamEntry 11 } + + d5vQamNetworkId OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "DVB network-id to be used in downstream ." + ::= { d5VideoQamStreamEntry 12 } + + d5vQamNetworkName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "DVB network-name to be used in downstream ." + ::= { d5VideoQamStreamEntry 13 } + + d5vQamPassThroughType OBJECT-TYPE + SYNTAX INTEGER { + on(1), + off(2), + mpts(3) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This can be used to disable the default Arris prog/pid + remapping scheme, and use pass-through remapping instead. + Can also be used to enable MPTS-pass-through mode. + " + ::= { d5VideoQamStreamEntry 14 } + + d5vQamConfVideoSiStreamEnabled OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Used to enable/disable video-si-stream configuration. + At least one of UDP/src-IP/dest-IP must be non-zero for + this video-si-stream rule to be functional." + ::= { d5VideoQamStreamEntry 15 } + + d5vQamConfVideoSiStreamUdpDest OBJECT-TYPE + SYNTAX Unsigned32 (0..65535) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Video-si-stream UDP destination port.(A value of 0 in + a rule means that the udp-port can be ANY value for + pattern-matching)" + ::= { d5VideoQamStreamEntry 16 } + + d5vQamConfVideoSiStreamIpSrc OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Video-si-stream IP source address.(A value of 0 in + a rule means that the src-IP can be ANY value for + pattern-matching)" + ::= { d5VideoQamStreamEntry 17 } + + d5vQamConfVideoSiStreamIpDest OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Video-si-stream IP destination address.(A value of 0 in + a rule means that the dest-IP can be ANY value for + pattern-matching)" + ::= { d5VideoQamStreamEntry 18 } + + d5vQamActiveVideoSiStreamEnabled OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Used to indicate if the QAM is currently passing a + video-si-stream." + ::= { d5VideoQamStreamEntry 19 } + + d5vQamActiveVideoSiStreamUdpDest OBJECT-TYPE + SYNTAX Unsigned32 (0..65535) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Active video-si-stream UDP destination port." + ::= { d5VideoQamStreamEntry 20 } + + d5vQamActiveVideoSiStreamIpSrc OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Active video-si-stream IP source address." + ::= { d5VideoQamStreamEntry 21 } + + d5vQamActiveVideoSiStreamIpDest OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Active video-si-stream IP destination address." + ::= { d5VideoQamStreamEntry 22 } + + d5vQamStreamStatus OBJECT-TYPE + SYNTAX D5TransportStreamStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Current status of this QAM Transport stream" + ::= { d5VideoQamStreamEntry 23 } + + d5vQamTimeActivated OBJECT-TYPE + SYNTAX TimeStamp + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of sysUpTime when this stream was last activated. + Zero if not-applicable." + ::= { d5VideoQamStreamEntry 24 } + + d5vQamTimeActive OBJECT-TYPE + SYNTAX Counter32 + UNITS "seconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total time that MPEG stream has been active." + ::= { d5VideoQamStreamEntry 25 } + + d5vQamTimeDeactivated OBJECT-TYPE + SYNTAX TimeStamp + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of sysUpTime when this stream was last + deactivated. Zero if not-known." + ::= { d5VideoQamStreamEntry 26 } + + d5vQamAutoGeneratePAT OBJECT-TYPE + SYNTAX D5GeneratePat + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Flag specifying whether or not the auto-generation by the + D5 of PAT tables is enabled" + ::= { d5VideoQamStreamEntry 27 } + + d5vQamAutoGenerateCAT OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Flag specifying whether or not the auto-generation by the + D5 of CAT tables is enabled" + ::= { d5VideoQamStreamEntry 28 } + + d5vQamAutoGeneratePMT OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Flag specifying whether or not the auto-generation by the + D5 of PMT tables is enabled" + ::= { d5VideoQamStreamEntry 29 } + + d5vQamAutoGenerateNIT OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Flag specifying whether or not the auto-generation by the + D5 of NIT tables is enabled(and the associated entry + in the PAT table for the NIT-PID)" + ::= { d5VideoQamStreamEntry 30 } + + d5vQamAutoGenerateSDT OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Flag specifying whether or not the auto-generation by the + D5 of SDT tables is enabled" + ::= { d5VideoQamStreamEntry 31 } + + d5vQamAutoGenerateTDT OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Flag specifying whether or not the auto-generation by the + D5 of TDT tables is enabled" + ::= { d5VideoQamStreamEntry 32 } + + d5vQamAutoGenerateTOT OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Flag specifying whether or not the auto-generation by the + D5 of TOT tables is enabled" + ::= { d5VideoQamStreamEntry 33 } + + d5vQamCatInterval OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Retransmission interval for CAT tables in milliseconds." + ::= { d5VideoQamStreamEntry 34 } + + d5vQamMaxProgramsPerQamChannel OBJECT-TYPE + SYNTAX Unsigned32 (0..63) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Maximum number of programs allowed on a Qam channel at any + one time.(Some QAM H/W may restrict to 31) + " + ::= { d5VideoQamStreamEntry 35 } + + d5vQamAllowEsDvbPids OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Flag that determines whether or not DVB-reserved PIDS are + allowed to be used for elementary-streams." + ::= { d5VideoQamStreamEntry 36 } + + d5vQamDefaultMappingScheme OBJECT-TYPE + SYNTAX D5VideoDefaultMappingScheme + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The mapping scheme to be used for input transport-streams + that have no associated static-configuration. + NOTE: the udpPortLegacy scheme cannot be configured + against an individual QAM-channel. If so desired, it may + be turned on globally in the d5vControlDefaultMappingScheme + MIB entry. + " + ::= { d5VideoQamStreamEntry 37 } + + d5vQamFastPsiTableUpdates OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "If this is set to TRUE, then PSI table updates are sent + down the RF as soon as the new PSI table has been + calculated. Otherwise, PSI table updates are made in such + a way that the repetition interval for that table on the + RF remains constant. (Set to FALSE by default)" + ::= { d5VideoQamStreamEntry 38 } + + d5vQamCycleOutputPids OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "If this is set to TRUE, then the D5 cycles through the pool + of unused PIDs when creating new PID remappings. The + purpose of this is to limit the amound of PID reusage E.g. + if a set-top using a buffered PMT table to view a program + where the program may have been deleted and the PIDs may be + in use by a different program now. (Set to FALSE by default + )" + ::= { d5VideoQamStreamEntry 39 } + + d5vQamOverSubscribed OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates if the bandwidth of this QAM is currently + over-subscribed. If the QAM is currently over-subscribed, + some programs will suffer packet-loss. The affected + programs are identified in the d5QamProgramPcrBufferTable." + ::= { d5VideoQamStreamEntry 40 } + + d5vQamOverSubscriptionSafetyMargin OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The amount of bandwidth in Kbps for the D5 to maintain + as unused bandwidth on each QAM. Purpose of this being + to help prevent over-subscription from occuring at the + cost of some wasted bandwidth." + ::= { d5VideoQamStreamEntry 41 } + + d5vQamOverSubscriptionRecoveryEnabled OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "If this is set to TRUE, then the D5 will attempt to + recover automatically from a QAM-overscribed condition by + shutting down active programs selectively. It selects + which programs to shut down by order of most recently + activated, checks the new bitrates, then continues to + shutdown more programs as neccessary untill the total + bandwidth fits within the QAM available bandwidth." + ::= { d5VideoQamStreamEntry 42 } + + d5vQamFilterCaDescMode OBJECT-TYPE + SYNTAX INTEGER { + cat-and-pmt(1), + neither(2), + cat-only(3), + pmt-only(4) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "If this is configured, then the D5 will remove + CA_Descriptors from incoming streams destined for this QAM. + This includes descriptors in CAT and PMT tables, and in + the case of PMT includes the 1st and 2nd loop. This is + set to 'neither' by default." + ::= { d5VideoQamStreamEntry 43 } + + d5vQamPcrDriftCorrection OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS deprecated + DESCRIPTION + "If this is set to TRUE, then PCR drift correction of input + MPEG streams is enabled on the resultant output stream. + Otherwise, the functionality is disabled." + ::= { d5VideoQamStreamEntry 44 } + + d5vQamPreEncDetect OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "If this is set to TRUE, then the D5 will detect Motorola + pre-encrypted streams, and will avoid re-encrypting the + traffic when forwarding it downstream. If set to TRUE, + the d5vControlFilterCaDesc setting is ignored for any + pre-encrypted streams that match this rule, because the + stream could not otherwise be decrypted." + ::= { d5VideoQamStreamEntry 45 } + + d5vQamUtilPercentThresh OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The percentage utilization threshold of the QAM bandwidth + at which the D5 will generate an alarm. The purpose of this + is to facilitate monitoring of QAM bandwidth where the QAM + might not necessarily be oversubscribed. + " + ::= { d5VideoQamStreamEntry 46 } + + d5vQamOnProgramConflictDisconnectOlderStream OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "If enabled, program conflicts trigger the older of the two + streams to be disconnected. I.E. the newer stream takes + the program number. + NOTE: this only affects streams which have the same + destination udp&IP values, and differ by source-IP. + " + ::= { d5VideoQamStreamEntry 47 } + + d5vQamNullDroppingRate OBJECT-TYPE + SYNTAX Unsigned32(0..7500) + UNITS "Kbps" + MAX-ACCESS read-write + STATUS deprecated + DESCRIPTION + "The rate used when performing NULL packet dropping. + In units of Kbps - setting will be rounded up + to the nearest 150 Kbps multiple" + ::= { d5VideoQamStreamEntry 48 } + + + d5vQamConfVideoSiStreamTsidRemap OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The default behaviour of video-si streams is not to remap + the ingress Transport_Stream_id so that the TS_ID in the + PAT matches the value in the other SI tables. Enabling + this parameter, overrides the default behaviour and remaps + the TS_ID in the PAT to the value configured on the QAM + channel. + NOTE: this only affects streams which are configured as + video-si-stream. + " + ::= { d5VideoQamStreamEntry 49 } + +-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- +-- UDP/IP table (root of incoming transport-streams in the MIB) +-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- + d5VideoUdpIpStreamTable OBJECT-TYPE + SYNTAX SEQUENCE OF D5VideoUdpIpStreamEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table displays the current incoming Transport Streams and + can be configured with specific rules to override the default + Program Number mappings. This table has a higher precedence + than the d5VideoUdpPortPnTable. If the IP Address associated + with an incoming TS matches a configured entry in this table + then the associated mapping will apply, otherwise the default + mapping from d5vUdpPortPnTable will apply and an dynamic entry + will be created in this table. + Active entries contain a reference to either a specific QAM + or a specific channel-container. When a stream is treated as + a virtual-program, the d5vIpActiveChanContName field is set to + indicate which channel-container this stream is being mapped + to. For any individual active entry in this table, either + d5vIpActiveQamIfIndex or d5vIpActiveChanContName is set - not + both. + " + ::= { d5VideoObjects 3 } + + d5VideoUdpIpStreamEntry OBJECT-TYPE + SYNTAX D5VideoUdpIpStreamEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "" + INDEX { d5vIpUdpIndex, d5vIpSrcIndex, d5vIpDestIndex } + ::= { d5VideoUdpIpStreamTable 1 } + + D5VideoUdpIpStreamEntry ::= SEQUENCE { + d5vIpUdpIndex Unsigned32, + d5vIpSrcIndex IpAddress, + d5vIpDestIndex IpAddress, + d5vIpRowStatus RowStatus, + d5vIpTsMibIndex D5TransportStreamIndex, + d5vIpMappingType D5MappingType, + d5vIpConfQamIfIndex InterfaceIndexOrZero, + d5vIpStreamStatus D5TransportStreamStatus, + d5vIpActiveQamIfIndex InterfaceIndexOrZero, + d5vIpActiveChanContName D5VideoChannelContainerNameType, + d5vIpTimeActivated TimeStamp, + d5vIpTimeActive Counter32, + d5vIpTimeDeactivated TimeStamp, + d5vIpConfProgPassThroughEnabled TruthValue, + d5vIpActiveProgPassThroughEnabled TruthValue, + d5vIpConfPidPassThroughEnabled TruthValue, + d5vIpActivePidPassThroughEnabled TruthValue, + d5vIpConfRedundantMulticast TruthValue, + d5vIpActiveRedundantMulticast TruthValue, + d5vIpConfPersistence D5PersistenceType + } + + d5vIpUdpIndex OBJECT-TYPE + SYNTAX Unsigned32 (0..65535) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The destination UDP Port to be mapped to the specified QAM + Channel and Program Number.(A value of 0 in a rule means + that the udp-port can be ANY value for pattern-matching)" + ::= { d5VideoUdpIpStreamEntry 1 } + + d5vIpSrcIndex OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The SRC IP address of the TS to be mapped to the specified + QAM Channel and Program Number.(A value of 0 in a rule + means that the src-IP can be ANY value for pattern-matching + )" + ::= { d5VideoUdpIpStreamEntry 2 } + + d5vIpDestIndex OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The DEST IP address of the TS to be mapped to the specified + QAM Channel and Program Number.(A value of 0 in a rule + means that the dest-IP can be ANY value for + pattern-matching)" + ::= { d5VideoUdpIpStreamEntry 3 } + + d5vIpRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The RowStatus for controlling entries in this table." + ::= { d5VideoUdpIpStreamEntry 4 } + + d5vIpTsMibIndex OBJECT-TYPE + SYNTAX D5TransportStreamIndex + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The index of the entry in the d5VideoStreamTable + for corresponding to this table entry." + ::= { d5VideoUdpIpStreamEntry 5 } + + d5vIpMappingType OBJECT-TYPE + SYNTAX D5MappingType + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The type of entry, configured or dynamic." + ::= { d5VideoUdpIpStreamEntry 6 } + + d5vIpConfQamIfIndex OBJECT-TYPE + SYNTAX InterfaceIndexOrZero + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The ifIndex of the QAM channel that this IP transport + stream is configured to be mapped to. A value of 0 + indicates that no mapping is configured." + DEFVAL { 0 } + ::= { d5VideoUdpIpStreamEntry 7 } + + d5vIpStreamStatus OBJECT-TYPE + SYNTAX D5TransportStreamStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Current status of this IP Transport stream" + ::= { d5VideoUdpIpStreamEntry 8 } + + d5vIpActiveQamIfIndex OBJECT-TYPE + SYNTAX InterfaceIndexOrZero + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The ifIndex of the QAM channel that this stream is + currently mapped to." + ::= { d5VideoUdpIpStreamEntry 9 } + + d5vIpActiveChanContName OBJECT-TYPE + SYNTAX D5VideoChannelContainerNameType + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The name of the channel-container that this stream is + currently mapped to." + ::= { d5VideoUdpIpStreamEntry 10 } + + d5vIpTimeActivated OBJECT-TYPE + SYNTAX TimeStamp + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of sysUpTime when this stream was last activated. + Zero if not-applicable." + ::= { d5VideoUdpIpStreamEntry 11 } + + d5vIpTimeActive OBJECT-TYPE + SYNTAX Counter32 + UNITS "seconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total time that MPEG stream has been active." + ::= { d5VideoUdpIpStreamEntry 12 } + + d5vIpTimeDeactivated OBJECT-TYPE + SYNTAX TimeStamp + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of sysUpTime when this stream was last + deactivated. Zero if not-known." + ::= { d5VideoUdpIpStreamEntry 13 } + + d5vIpConfProgPassThroughEnabled OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This can be used to configure default PROG remapping + for this stream. If this is set to TRUE, input PROGs are + mapped to identical output PROGs (as if pass-through + mode were enabled on the QAM). + " + DEFVAL {FALSE} + ::= { d5VideoUdpIpStreamEntry 14 } + + d5vIpActiveProgPassThroughEnabled OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates if default PROG-remapping is currently + enabled for this stream. (May differ from the value of + d5vIpConfProgPassThroughEnabled where a dynamic entry is + created based on static-rules). + " + ::= { d5VideoUdpIpStreamEntry 15 } + + d5vIpConfPidPassThroughEnabled OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This can be used to configure default PID remapping + for this stream. If this is set to TRUE, input PIDs are + mapped to identical output PIDs (as if pass-through + mode were enabled on the QAM). + " + DEFVAL {FALSE} + ::= { d5VideoUdpIpStreamEntry 16 } + + d5vIpActivePidPassThroughEnabled OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates if default PID-remapping is currently + enabled for this stream. (May differ from the value of + d5vIpConfPidPassThroughEnabled where a dynamic entry is + created based on static-rules). + " + ::= { d5VideoUdpIpStreamEntry 17 } + + d5vIpConfRedundantMulticast OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This can be used to configure a video stream for redundancy + May be set to TRUE only if the d5vIpSrcIndex is set to 0 + and the d5vIpDestIndex is set to a valid multicast address + and the d5vIpUdpIndex is set to a non-zero value. + When this value is set to TRUE, the D5 WAN card doesn't + distinguish between packets with different srcIp values, + where the d5vIpUdpIndex and d5vIpDestIndex match this rule. + " + DEFVAL {FALSE} + ::= { d5VideoUdpIpStreamEntry 18 } + + d5vIpActiveRedundantMulticast OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Indicates if redundant-multicast is currently enabled for + this stream. (May differ from the value of + d5vIpConfRedundantMulticast where a dynamic entry is + created based on static-rules). + " + DEFVAL {FALSE} + ::= { d5VideoUdpIpStreamEntry 19 } + + d5vIpConfPersistence OBJECT-TYPE + SYNTAX D5PersistenceType + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This is used to toggle the table entry as being volatile or + non-volatile. If set to volatile, it is not saved across + card resets. + This setting is only meaningful for entries that have + a d5vIpMappingType of static + " + DEFVAL { nonVolatile } + ::= { d5VideoUdpIpStreamEntry 20 } + + +-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- +-- MPEG Transport Streams, Programs, Elementary Streams and Descriptor Tables +-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- + d5VideoStreamTable OBJECT-TYPE + SYNTAX SEQUENCE OF D5VideoStreamEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table stores basic information on all Transport Streams + in the D5. It covers both incoming and outgoing ones. The MPEG + Manager automatically creates any entry in this table when it + detects a new incoming TS or begins to generate a new outgoing + TS." + ::= { d5VideoObjects 4 } + + d5VideoStreamEntry OBJECT-TYPE + SYNTAX D5VideoStreamEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "" + INDEX { d5vStreamDirectionIndex, d5vStreamTsMibIndex} + ::= { d5VideoStreamTable 1 } + + D5VideoStreamEntry ::= SEQUENCE { + d5vStreamDirectionIndex D5TransportStreamDirection, + d5vStreamTsMibIndex D5TransportStreamIndex, + d5vStreamPatVersion Unsigned32, + d5vStreamTsID Unsigned32, + d5vStreamProgramCount Gauge32, + d5vStreamPatCurrTimeCreated TimeStamp, + d5vStreamPatCurrTimeActive Counter32, + d5vStreamPatPrevTimeCreated TimeStamp, + d5vStreamCatVersion Unsigned32, + d5vStreamCatCurrTimeCreated TimeStamp, + d5vStreamCatCurrTimeActive Counter32, + d5vStreamCatPrevTimeCreated TimeStamp + } + + d5vStreamDirectionIndex OBJECT-TYPE + SYNTAX D5TransportStreamDirection + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The direction of this Transport Stream." + ::= { d5VideoStreamEntry 1 } + + d5vStreamTsMibIndex OBJECT-TYPE + SYNTAX D5TransportStreamIndex + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The unique index that identifies the Transport Stream + within the D5." + ::= { d5VideoStreamEntry 2 } + + d5vStreamPatVersion OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The version number of the current PAT Table for this + Transport Stream." + ::= { d5VideoStreamEntry 3 } + + d5vStreamTsID OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The MPEG transport_stream_id in the PAT tables on this + Transport Stream." + ::= { d5VideoStreamEntry 4 } + + d5vStreamProgramCount OBJECT-TYPE + SYNTAX Gauge32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of Programs currently in this Transport + Stream." + ::= { d5VideoStreamEntry 5 } + + d5vStreamPatCurrTimeCreated OBJECT-TYPE + SYNTAX TimeStamp + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of sysUpTime when the current PAT was created. + Zero if not-applicable." + ::= { d5VideoStreamEntry 6 } + + d5vStreamPatCurrTimeActive OBJECT-TYPE + SYNTAX Counter32 + UNITS "seconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The total time the current PAT has been active." + ::= { d5VideoStreamEntry 7 } + + d5vStreamPatPrevTimeCreated OBJECT-TYPE + SYNTAX TimeStamp + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of sysUpTime when the predecessor of this PAT was + created. Zero if not-known." + ::= { d5VideoStreamEntry 8 } + + d5vStreamCatVersion OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The version number of the current CAT Table for this + Transport Stream." + ::= { d5VideoStreamEntry 9 } + + d5vStreamCatCurrTimeCreated OBJECT-TYPE + SYNTAX TimeStamp + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of sysUpTime when the current CAT was created. + Zero if not-applicable." + ::= { d5VideoStreamEntry 10 } + + d5vStreamCatCurrTimeActive OBJECT-TYPE + SYNTAX Counter32 + UNITS "seconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The total time the current CAT has been active." + ::= { d5VideoStreamEntry 11 } + + d5vStreamCatPrevTimeCreated OBJECT-TYPE + SYNTAX TimeStamp + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of sysUpTime when the predecessor of this CAT was + created. Zero if not-known." + ::= { d5VideoStreamEntry 12 } + + d5VideoStreamProgramTable OBJECT-TYPE + SYNTAX SEQUENCE OF D5VideoStreamProgramEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table stores basic information for each Program in each + Transport Stream known to the D5. Each entry in + d5VideoStreamTable will have at least one entry in this table." + ::= { d5VideoObjects 5 } + + d5VideoStreamProgramEntry OBJECT-TYPE + SYNTAX D5VideoStreamProgramEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "" + INDEX { d5vStreamProgTsMibIndex, d5vStreamProgIndex} + ::= { d5VideoStreamProgramTable 1 } + + D5VideoStreamProgramEntry ::= SEQUENCE { + d5vStreamProgTsMibIndex D5TransportStreamIndex, + d5vStreamProgIndex D5Program, + d5vStreamProgPmtVersion Unsigned32, + d5vStreamProgPmtPid D5PID, + d5vStreamProgPcrPid D5PID, + d5vStreamProgEsCount Gauge32, + d5vStreamProgDescCount Gauge32, + d5vStreamPmtCurrTimeCreated TimeStamp, + d5vStreamPmtCurrTimeActive Counter32, + d5vStreamPmtPrevTimeCreated TimeStamp, + d5vStreamProgBitrate Unsigned32 + } + + d5vStreamProgTsMibIndex OBJECT-TYPE + SYNTAX D5TransportStreamIndex + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The unique index that identifies the Transport Stream + containing this Program." + ::= { d5VideoStreamProgramEntry 1 } + + d5vStreamProgIndex OBJECT-TYPE + SYNTAX D5Program + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The Program Number for this program within the associated + Transport Stream." + ::= { d5VideoStreamProgramEntry 2 } + + d5vStreamProgPmtVersion OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The version number of the current PMT Table for this + Program." + ::= { d5VideoStreamProgramEntry 3 } + + d5vStreamProgPmtPid OBJECT-TYPE + SYNTAX D5PID + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The MPEG PID used for the PMT Table for this Program." + ::= { d5VideoStreamProgramEntry 4 } + + d5vStreamProgPcrPid OBJECT-TYPE + SYNTAX D5PID + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The MPEG PID used to for the PCR for this Program." + ::= { d5VideoStreamProgramEntry 5 } + + d5vStreamProgEsCount OBJECT-TYPE + SYNTAX Gauge32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of Elementary Streams currently in this + Program." + ::= { d5VideoStreamProgramEntry 6 } + + d5vStreamProgDescCount OBJECT-TYPE + SYNTAX Gauge32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of Descriptors in the PMT 'first_loop' for this + Program." + ::= { d5VideoStreamProgramEntry 7 } + + d5vStreamPmtCurrTimeCreated OBJECT-TYPE + SYNTAX TimeStamp + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of sysUpTime when the current PMT was created. + Zero if not-applicable." + ::= { d5VideoStreamProgramEntry 8 } + + d5vStreamPmtCurrTimeActive OBJECT-TYPE + SYNTAX Counter32 + UNITS "seconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The total time the current PMT has been active." + ::= { d5VideoStreamProgramEntry 9 } + + d5vStreamPmtPrevTimeCreated OBJECT-TYPE + SYNTAX TimeStamp + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of sysUpTime when the predecessor of this PMT was + created. Zero if not-known." + ::= { d5VideoStreamProgramEntry 10 } + + d5vStreamProgBitrate OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The bitate in Kbps, of this Program. This may have a value + of 0 if the bitrate is not known." + ::= { d5VideoStreamProgramEntry 11 } + + d5VideoStreamEsTable OBJECT-TYPE + SYNTAX SEQUENCE OF D5VideoStreamEsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table stores basic information for each Elementary Stream + in each Transport Stream known to the D5. Each entry in + d5VideoProgTable will have at least one entry in this table. + These entries are created automatically as the D5 processes PMT + table entries for each Elementary Stream in a Program" + ::= { d5VideoObjects 6 } + + d5VideoStreamEsEntry OBJECT-TYPE + SYNTAX D5VideoStreamEsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "" + INDEX { d5vStreamEsTsMibIndex, d5vStreamEsProgIndex, + d5vStreamEsPidIndex} + ::= { d5VideoStreamEsTable 1 } + + D5VideoStreamEsEntry ::= SEQUENCE { + d5vStreamEsTsMibIndex D5TransportStreamIndex, + d5vStreamEsProgIndex D5Program, + d5vStreamEsPidIndex D5PID, + d5vStreamEsType D5ElementaryStreamType, + d5vStreamEsDescCount Gauge32 + } + + d5vStreamEsTsMibIndex OBJECT-TYPE + SYNTAX D5TransportStreamIndex + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The unique index that identifies the Transport Stream + containing this Program." + ::= { d5VideoStreamEsEntry 1 } + + d5vStreamEsProgIndex OBJECT-TYPE + SYNTAX D5Program + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The Program Number for this program within the associated + Transport Stream." + ::= { d5VideoStreamEsEntry 2 } + + d5vStreamEsPidIndex OBJECT-TYPE + SYNTAX D5PID + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The MPEG PID used for this Elementary Stream." + ::= { d5VideoStreamEsEntry 3 } + + d5vStreamEsType OBJECT-TYPE + SYNTAX D5ElementaryStreamType + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The type of this Elementary Streams." + ::= { d5VideoStreamEsEntry 4 } + + d5vStreamEsDescCount OBJECT-TYPE + SYNTAX Gauge32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of Descriptors in the PMT 'second_loop' for + this Elementary Stream." + ::= { d5VideoStreamEsEntry 5 } + + d5VideoStreamDescTable OBJECT-TYPE + SYNTAX SEQUENCE OF D5VideoStreamDescEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table stores MPEG Descriptors for each Elementary Stream + and Program known to the D5. The PMT PID is used to index + Program Descriptors while the Elementary Stream PID is used + when indexing ES Descriptors." + ::= { d5VideoObjects 7 } + + d5VideoStreamDescEntry OBJECT-TYPE + SYNTAX D5VideoStreamDescEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "" + INDEX { d5vStreamDescTsMibIndex, d5vStreamDescPidIndex, + d5vStreamDescIndex} + ::= { d5VideoStreamDescTable 1 } + + D5VideoStreamDescEntry ::= SEQUENCE { + d5vStreamDescTsMibIndex D5TransportStreamIndex, + d5vStreamDescPidIndex D5PID, + d5vStreamDescIndex D5DescriptorIndex, + d5vStreamDescTag D5DescriptorTag, + d5vStreamDescLen INTEGER, + d5vStreamDescData D5DescriptorBuffer + } + + d5vStreamDescTsMibIndex OBJECT-TYPE + SYNTAX D5TransportStreamIndex + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The unique index that identifies the Transport Stream + containing this Descriptor." + ::= { d5VideoStreamDescEntry 1 } + + d5vStreamDescPidIndex OBJECT-TYPE + SYNTAX D5PID + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The MPEG PID used for this Elementary Stream." + ::= { d5VideoStreamDescEntry 2 } + + d5vStreamDescIndex OBJECT-TYPE + SYNTAX D5DescriptorIndex + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The Descriptor index." + ::= { d5VideoStreamDescEntry 3 } + + d5vStreamDescTag OBJECT-TYPE + SYNTAX D5DescriptorTag + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The Descriptor tag." + ::= { d5VideoStreamDescEntry 4 } + + d5vStreamDescLen OBJECT-TYPE + SYNTAX INTEGER ( 1..255) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The Descriptor length." + ::= { d5VideoStreamDescEntry 5 } + + d5vStreamDescData OBJECT-TYPE + SYNTAX D5DescriptorBuffer + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The Descriptor data." + ::= { d5VideoStreamDescEntry 6 } + + + +-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- +-- Index Lookup tables +-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- + d5VideoLookupTsidToIfIndexTable OBJECT-TYPE + SYNTAX SEQUENCE OF D5VideoLookupTsidToIfIndexEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table maps the transport_stream_id of a Transport Stream + on a QAM channel to the ifIndex for that channel." + ::= { d5VideoObjects 8 } + + d5VideoLookupTsidToIfIndexEntry OBJECT-TYPE + SYNTAX D5VideoLookupTsidToIfIndexEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "" + INDEX { d5vQamTransportStreamID} + ::= { d5VideoLookupTsidToIfIndexTable 1 } + + D5VideoLookupTsidToIfIndexEntry ::= SEQUENCE { + d5vLookupTsidIfIndex InterfaceIndex + } + + d5vLookupTsidIfIndex OBJECT-TYPE + SYNTAX InterfaceIndex + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The ifIndex for the QAM channel transmitting this + transport_stream_id." + ::= { d5VideoLookupTsidToIfIndexEntry 1 } + + d5VideoLookupTsMibIndexToIfIndexTable OBJECT-TYPE + SYNTAX SEQUENCE OF D5VideoLookupTsMibIndexToIfIndexEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table maps the TsIndex of an outgoing Transport Stream on + a QAM channel to the ifIndex for that channel. The Transport + Stream is assumed to be an 'outgoing' one." + ::= { d5VideoObjects 9 } + + d5VideoLookupTsMibIndexToIfIndexEntry OBJECT-TYPE + SYNTAX D5VideoLookupTsMibIndexToIfIndexEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "" + INDEX { d5vQamTsMibIndex} + ::= { d5VideoLookupTsMibIndexToIfIndexTable 1 } + + D5VideoLookupTsMibIndexToIfIndexEntry ::= SEQUENCE { + d5vLookupTsIndexIfIndex InterfaceIndex + } + + d5vLookupTsIndexIfIndex OBJECT-TYPE + SYNTAX InterfaceIndex + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The ifIndex for the QAM channel transmitting this + TransportStreamIndex." + ::= { d5VideoLookupTsMibIndexToIfIndexEntry 1 } + + d5VideoLookupQamTsMibIndexToInTsMibIndexTable OBJECT-TYPE + SYNTAX SEQUENCE OF D5VideoLookupQamTsMibIndexToInTsMibIndexEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table maps the TransportStreamIndex of a Transport Stream + on a QAM channel to the corresponding incoming + TransportStreamIndexes. + d5vTsMibIndex - an outgoing Transport Stream + d5vInTsMibIndex - the corresponding incoming Transport + Stream." + ::= { d5VideoObjects 10 } + + d5VideoLookupQamTsMibIndexToInTsMibIndexEntry OBJECT-TYPE + SYNTAX D5VideoLookupQamTsMibIndexToInTsMibIndexEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "" + INDEX { d5vQamTsMibIndex, d5vLookupInTsMibIndex} + ::= { d5VideoLookupQamTsMibIndexToInTsMibIndexTable 1 } + + D5VideoLookupQamTsMibIndexToInTsMibIndexEntry ::= SEQUENCE { + d5vLookupInTsMibIndex D5TransportStreamIndex + } + + d5vLookupInTsMibIndex OBJECT-TYPE + SYNTAX D5TransportStreamIndex + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "MIB TsIndex for an incoming transport stream(IP)." + ::= { d5VideoLookupQamTsMibIndexToInTsMibIndexEntry 1 } + + d5VideoLookupTsMibIndexToUdpIpTable OBJECT-TYPE + SYNTAX SEQUENCE OF D5VideoLookupTsMibIndexToUdpIpEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table maps the TransportStreamIndex of an incoming + Transport Stream to the IP address and UDP port for that + Transport Stream." + ::= { d5VideoObjects 11 } + + d5VideoLookupTsMibIndexToUdpIpEntry OBJECT-TYPE + SYNTAX D5VideoLookupTsMibIndexToUdpIpEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "" + INDEX { d5vIpTsMibIndex} + ::= { d5VideoLookupTsMibIndexToUdpIpTable 1 } + + D5VideoLookupTsMibIndexToUdpIpEntry ::= SEQUENCE { + d5vLookupTsMibIndexUdpPort Unsigned32, + d5vLookupTsMibIndexIpAddressSrc IpAddress, + d5vLookupTsMibIndexIpAddressDest IpAddress + } + + d5vLookupTsMibIndexUdpPort OBJECT-TYPE + SYNTAX Unsigned32 (1..65535) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The UDP receiving the Transport Stream for + TransportStreamIndex." + ::= { d5VideoLookupTsMibIndexToUdpIpEntry 1 } + + d5vLookupTsMibIndexIpAddressSrc OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The SRC IP address receiving the Transport Stream for + TransportStreamIndex." + ::= { d5VideoLookupTsMibIndexToUdpIpEntry 2 } + + d5vLookupTsMibIndexIpAddressDest OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The DEST IP address receiving the Transport Stream for + TransportStreamIndex." + ::= { d5VideoLookupTsMibIndexToUdpIpEntry 3 } + + +-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- +-- Tables of per udp/ip PID/PROG remappings to particular QAMs +-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- + d5VideoUdpIpStreamProgRemapTable OBJECT-TYPE + SYNTAX SEQUENCE OF D5VideoUdpIpStreamProgRemapEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table displays the active Program mappings for Transport + Streams. It is indexed using udp/ip/ip/inProg/qamIfIndex to + support multiple output programs for each input program." + ::= { d5VideoObjects 12 } + + d5VideoUdpIpStreamProgRemapEntry OBJECT-TYPE + SYNTAX D5VideoUdpIpStreamProgRemapEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "" + INDEX { d5vProgRemapUdpIndex, d5vProgRemapIpSrcIndex, + d5vProgRemapIpDestIndex, d5vProgRemapInProgIndex, + d5vProgRemapActiveQamIfIndex, d5vProgRemapOutProg + } + ::= { d5VideoUdpIpStreamProgRemapTable 1 } + + D5VideoUdpIpStreamProgRemapEntry ::= SEQUENCE { + d5vProgRemapUdpIndex Unsigned32, + d5vProgRemapIpSrcIndex IpAddress, + d5vProgRemapIpDestIndex IpAddress, + d5vProgRemapInProgIndex D5Program, + d5vProgRemapActiveQamIfIndex InterfaceIndex, + d5vProgRemapOutProg D5Program, + d5vProgRemapStatus D5ProgStatus, + d5vProgRemapActiveProgType D5ProgType, + d5vProgRemapTimeActivated TimeStamp, + d5vProgRemapTimeActive Counter32, + d5vProgRemapTimeDeactivated TimeStamp + } + + d5vProgRemapUdpIndex OBJECT-TYPE + SYNTAX Unsigned32 (0..65535) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The destination UDP Port of the incoming TS." + ::= { d5VideoUdpIpStreamProgRemapEntry 1 } + + d5vProgRemapIpSrcIndex OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The SRC IP address of the incoming TS." + ::= { d5VideoUdpIpStreamProgRemapEntry 2 } + + d5vProgRemapIpDestIndex OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The DEST IP address of the incoming TS." + ::= { d5VideoUdpIpStreamProgRemapEntry 3 } + + d5vProgRemapInProgIndex OBJECT-TYPE + SYNTAX D5Program + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The incoming Program value related to this Program + remapping." + ::= { d5VideoUdpIpStreamProgRemapEntry 4 } + + d5vProgRemapActiveQamIfIndex OBJECT-TYPE + SYNTAX InterfaceIndex + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The ifIndex of the QAM channel that this Program remapping + applies to." + ::= { d5VideoUdpIpStreamProgRemapEntry 5 } + + d5vProgRemapOutProg OBJECT-TYPE + SYNTAX D5Program + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The output Program value related to this Program mapping + rule." + ::= { d5VideoUdpIpStreamProgRemapEntry 6 } + + d5vProgRemapStatus OBJECT-TYPE + SYNTAX D5ProgStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Current status of this Program - whether active or not" + ::= { d5VideoUdpIpStreamProgRemapEntry 7 } + + d5vProgRemapActiveProgType OBJECT-TYPE + SYNTAX D5ProgType + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The type of Program whether PSI or Elementary stream." + ::= { d5VideoUdpIpStreamProgRemapEntry 8 } + + d5vProgRemapTimeActivated OBJECT-TYPE + SYNTAX TimeStamp + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of sysUpTime when this Program was last + activated. Zero if not-applicable." + ::= { d5VideoUdpIpStreamProgRemapEntry 9 } + + d5vProgRemapTimeActive OBJECT-TYPE + SYNTAX Counter32 + UNITS "seconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total time that the Program has been active." + ::= { d5VideoUdpIpStreamProgRemapEntry 10 } + + d5vProgRemapTimeDeactivated OBJECT-TYPE + SYNTAX TimeStamp + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of sysUpTime when this Program was last + deactivated. Zero if not-known." + ::= { d5VideoUdpIpStreamProgRemapEntry 11 } + + d5VideoUdpIpStreamPidRemapTable OBJECT-TYPE + SYNTAX SEQUENCE OF D5VideoUdpIpStreamPidRemapEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table displays the active PID mappings for Transport + Streams. It is indexed using udp/ip/ip/inPid/qamIfIndex to + support multiple output programs for each input program." + ::= { d5VideoObjects 13 } + + d5VideoUdpIpStreamPidRemapEntry OBJECT-TYPE + SYNTAX D5VideoUdpIpStreamPidRemapEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "" + INDEX { d5vPidRemapUdpIndex, d5vPidRemapIpSrcIndex, + d5vPidRemapIpDestIndex, d5vPidRemapInPidIndex, + d5vPidRemapActiveQamIfIndex, d5vPidRemapOutPid + } + ::= { d5VideoUdpIpStreamPidRemapTable 1 } + + D5VideoUdpIpStreamPidRemapEntry ::= SEQUENCE { + d5vPidRemapUdpIndex Unsigned32, + d5vPidRemapIpSrcIndex IpAddress, + d5vPidRemapIpDestIndex IpAddress, + d5vPidRemapInPidIndex D5PID, + d5vPidRemapActiveQamIfIndex InterfaceIndex, + d5vPidRemapOutPid D5PID, + d5vPidRemapStatus D5PidStatus, + d5vPidRemapActivePidType D5PidType, + d5vPidRemapTimeActivated TimeStamp, + d5vPidRemapTimeActive Counter32, + d5vPidRemapTimeDeactivated TimeStamp + } + + d5vPidRemapUdpIndex OBJECT-TYPE + SYNTAX Unsigned32 (0..65535) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The destination UDP Port of the incoming TS." + ::= { d5VideoUdpIpStreamPidRemapEntry 1 } + + d5vPidRemapIpSrcIndex OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The SRC IP address of the incoming TS." + ::= { d5VideoUdpIpStreamPidRemapEntry 2 } + + d5vPidRemapIpDestIndex OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The DEST IP address of the incoming TS." + ::= { d5VideoUdpIpStreamPidRemapEntry 3 } + + d5vPidRemapInPidIndex OBJECT-TYPE + SYNTAX D5PID + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The incoming PID value related to this PID remapping." + ::= { d5VideoUdpIpStreamPidRemapEntry 4 } + + d5vPidRemapActiveQamIfIndex OBJECT-TYPE + SYNTAX InterfaceIndex + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The ifIndex of the QAM channel that this PID remapping + applies to." + ::= { d5VideoUdpIpStreamPidRemapEntry 5 } + + d5vPidRemapOutPid OBJECT-TYPE + SYNTAX D5PID + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The output PID value related to this PID mapping rule." + ::= { d5VideoUdpIpStreamPidRemapEntry 6 } + + d5vPidRemapStatus OBJECT-TYPE + SYNTAX D5PidStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Current status of this PID - whether active or not" + ::= { d5VideoUdpIpStreamPidRemapEntry 7 } + + d5vPidRemapActivePidType OBJECT-TYPE + SYNTAX D5PidType + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The type of PID whether PSI or Elementary stream." + ::= { d5VideoUdpIpStreamPidRemapEntry 8 } + + d5vPidRemapTimeActivated OBJECT-TYPE + SYNTAX TimeStamp + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of sysUpTime when this PID was last activated. + Zero if not-applicable." + ::= { d5VideoUdpIpStreamPidRemapEntry 9 } + + d5vPidRemapTimeActive OBJECT-TYPE + SYNTAX Counter32 + UNITS "seconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The total time that the PID has been active." + ::= { d5VideoUdpIpStreamPidRemapEntry 10 } + + d5vPidRemapTimeDeactivated OBJECT-TYPE + SYNTAX TimeStamp + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of sysUpTime when this PID was last deactivated. + Zero if not-known." + ::= { d5VideoUdpIpStreamPidRemapEntry 11 } + + + +-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- +-- Configured remapping/filtering Rules based on QAM port +-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- + d5VideoRuleQamProgRemapTable OBJECT-TYPE + SYNTAX SEQUENCE OF D5VideoRuleQamProgRemapEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Table contains list of qam-channel based configured program + remapping rules." + ::= { d5VideoObjects 14 } + + d5VideoRuleQamProgRemapEntry OBJECT-TYPE + SYNTAX D5VideoRuleQamProgRemapEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "" + INDEX { ifIndex, d5vProgRemapInProgIndex } + ::= { d5VideoRuleQamProgRemapTable 1 } + + D5VideoRuleQamProgRemapEntry ::= SEQUENCE { + d5vRQamProgRowStatus RowStatus, + d5vRQamProgOutProg D5Program, + d5vRQamProgMatchLastTime TimeStamp, + d5vRQamProgMatchCount Counter32, + d5vRQamProgPersistence D5PersistenceType + } + + d5vRQamProgRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The RowStatus for controlling entries in this table." + ::= { d5VideoRuleQamProgRemapEntry 1 } + + d5vRQamProgOutProg OBJECT-TYPE + SYNTAX D5Program + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The output Program value related to this rule." + ::= { d5VideoRuleQamProgRemapEntry 2 } + + d5vRQamProgMatchLastTime OBJECT-TYPE + SYNTAX TimeStamp + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of sysUpTime when this rule was last + matched/used at run-time. Zero if not-applicable." + ::= { d5VideoRuleQamProgRemapEntry 3 } + + d5vRQamProgMatchCount OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of times this rule was matched/used at + run-time. Zero if not-applicable." + ::= { d5VideoRuleQamProgRemapEntry 4 } + + d5vRQamProgPersistence OBJECT-TYPE + SYNTAX D5PersistenceType + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This is used to toggle the table entry as being volatile or + non-volatile. If set to volatile, it is not saved across + card resets. + " + DEFVAL { nonVolatile } + ::= { d5VideoRuleQamProgRemapEntry 5 } + + d5VideoRuleQamProgFilterTable OBJECT-TYPE + SYNTAX SEQUENCE OF D5VideoRuleQamProgFilterEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Table contains list of qam-channel based configured program + filter rules." + ::= { d5VideoObjects 15 } + + d5VideoRuleQamProgFilterEntry OBJECT-TYPE + SYNTAX D5VideoRuleQamProgFilterEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "" + INDEX { ifIndex, d5vProgRemapInProgIndex } + ::= { d5VideoRuleQamProgFilterTable 1 } + + D5VideoRuleQamProgFilterEntry ::= SEQUENCE { + d5vRQamProgFiltRowStatus RowStatus, + d5vRQamProgFiltMatchLastTime TimeStamp, + d5vRQamProgFiltMatchCount Counter32, + d5vRQamProgFiltPersistence D5PersistenceType + } + + d5vRQamProgFiltRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The RowStatus for controlling entries in this table." + ::= { d5VideoRuleQamProgFilterEntry 1 } + + d5vRQamProgFiltMatchLastTime OBJECT-TYPE + SYNTAX TimeStamp + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of sysUpTime when this rule was last matched/used + at run-time. Zero if not-applicable." + ::= { d5VideoRuleQamProgFilterEntry 2 } + + d5vRQamProgFiltMatchCount OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of times this rule was matched/used at run-time. + Zero if not-applicable." + ::= { d5VideoRuleQamProgFilterEntry 3 } + + d5vRQamProgFiltPersistence OBJECT-TYPE + SYNTAX D5PersistenceType + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This is used to toggle the table entry as being volatile or + non-volatile. If set to volatile, it is not saved across + card resets. + " + DEFVAL { nonVolatile } + ::= { d5VideoRuleQamProgFilterEntry 4 } + + d5VideoRuleQamPidRemapTable OBJECT-TYPE + SYNTAX SEQUENCE OF D5VideoRuleQamPidRemapEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Table contains list of qam-channel based configured PID + remapping rules." + ::= { d5VideoObjects 16 } + + d5VideoRuleQamPidRemapEntry OBJECT-TYPE + SYNTAX D5VideoRuleQamPidRemapEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "" + INDEX { ifIndex, d5vPidRemapInPidIndex } + ::= { d5VideoRuleQamPidRemapTable 1 } + + D5VideoRuleQamPidRemapEntry ::= SEQUENCE { + d5vRQamPidRowStatus RowStatus, + d5vRQamPidOutPid D5PID, + d5vRQamPidLastMatchTime TimeStamp, + d5vRQamPidMatchCount Counter32, + d5vRQamPidPersistence D5PersistenceType + } + + d5vRQamPidRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The RowStatus for controlling entries in this table." + ::= { d5VideoRuleQamPidRemapEntry 1 } + + d5vRQamPidOutPid OBJECT-TYPE + SYNTAX D5PID + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The output PID value related to this rule." + ::= { d5VideoRuleQamPidRemapEntry 2 } + + d5vRQamPidLastMatchTime OBJECT-TYPE + SYNTAX TimeStamp + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of sysUpTime when this rule was last + matched/used at run-time. Zero if not-applicable." + ::= { d5VideoRuleQamPidRemapEntry 3 } + + d5vRQamPidMatchCount OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of times this rule was matched/used at + run-time. Zero if not-applicable." + ::= { d5VideoRuleQamPidRemapEntry 4 } + + d5vRQamPidPersistence OBJECT-TYPE + SYNTAX D5PersistenceType + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This is used to toggle the table entry as being volatile or + non-volatile. If set to volatile, it is not saved across + card resets. + " + DEFVAL { nonVolatile } + ::= { d5VideoRuleQamPidRemapEntry 5 } + + d5VideoRuleQamPidFilterTable OBJECT-TYPE + SYNTAX SEQUENCE OF D5VideoRuleQamPidFilterEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Table contains list of qam-channel based configured PID filter + rules." + ::= { d5VideoObjects 17 } + + d5VideoRuleQamPidFilterEntry OBJECT-TYPE + SYNTAX D5VideoRuleQamPidFilterEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "" + INDEX { ifIndex, d5vPidRemapInPidIndex } + ::= { d5VideoRuleQamPidFilterTable 1 } + + D5VideoRuleQamPidFilterEntry ::= SEQUENCE { + d5vRQamPidFiltRowStatus RowStatus, + d5vRQamPidFiltLastMatchTime TimeStamp, + d5vRQamPidFiltMatchCount Counter32, + d5vRQamPidFiltPersistence D5PersistenceType + } + + d5vRQamPidFiltRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The RowStatus for controlling entries in this table." + ::= { d5VideoRuleQamPidFilterEntry 1 } + + d5vRQamPidFiltLastMatchTime OBJECT-TYPE + SYNTAX TimeStamp + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of sysUpTime when this rule was last matched/used + at run-time. Zero if not-applicable." + ::= { d5VideoRuleQamPidFilterEntry 2 } + + d5vRQamPidFiltMatchCount OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of times this rule was matched/used at run-time. + Zero if not-applicable." + ::= { d5VideoRuleQamPidFilterEntry 3 } + + d5vRQamPidFiltPersistence OBJECT-TYPE + SYNTAX D5PersistenceType + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This is used to toggle the table entry as being volatile or + non-volatile. If set to volatile, it is not saved across + card resets. + " + DEFVAL { nonVolatile } + ::= { d5VideoRuleQamPidFilterEntry 4 } + +-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- +-- Configured remapping/filtering Rules based on UDP/IP identification +-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- + d5VideoRuleUdpIpProgFilterTable OBJECT-TYPE + SYNTAX SEQUENCE OF D5VideoRuleUdpIpProgFilterEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Table contains list of UDP/IP based configured program filter + rules." + ::= { d5VideoObjects 18 } + + d5VideoRuleUdpIpProgFilterEntry OBJECT-TYPE + SYNTAX D5VideoRuleUdpIpProgFilterEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "" + INDEX { d5vProgRemapUdpIndex, d5vProgRemapIpSrcIndex, + d5vProgRemapIpDestIndex, d5vProgRemapInProgIndex } + ::= { d5VideoRuleUdpIpProgFilterTable 1 } + + D5VideoRuleUdpIpProgFilterEntry ::= SEQUENCE { + d5vRUdpIpProgFiltRowStatus RowStatus, + d5vRUdpIpProgFiltMatchLastTime TimeStamp, + d5vRUdpIpProgFiltMatchCount Counter32, + d5vRUdpIpProgFiltPersistence D5PersistenceType + } + + d5vRUdpIpProgFiltRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The RowStatus for controlling entries in this table." + ::= { d5VideoRuleUdpIpProgFilterEntry 1 } + + d5vRUdpIpProgFiltMatchLastTime OBJECT-TYPE + SYNTAX TimeStamp + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of sysUpTime when this rule was last matched/used + at run-time. Zero if not-applicable." + ::= { d5VideoRuleUdpIpProgFilterEntry 2 } + + d5vRUdpIpProgFiltMatchCount OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of times this rule was matched/used at run-time. + Zero if not-applicable." + ::= { d5VideoRuleUdpIpProgFilterEntry 3 } + + d5vRUdpIpProgFiltPersistence OBJECT-TYPE + SYNTAX D5PersistenceType + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This is used to toggle the table entry as being volatile or + non-volatile. If set to volatile, it is not saved across + card resets. + " + DEFVAL { nonVolatile } + ::= { d5VideoRuleUdpIpProgFilterEntry 4 } + + d5VideoRuleUdpIpPidFilterTable OBJECT-TYPE + SYNTAX SEQUENCE OF D5VideoRuleUdpIpPidFilterEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Table contains list of UDP/IP based configured PID filter + rules." + ::= { d5VideoObjects 19 } + + d5VideoRuleUdpIpPidFilterEntry OBJECT-TYPE + SYNTAX D5VideoRuleUdpIpPidFilterEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "" + INDEX { d5vPidRemapUdpIndex, d5vPidRemapIpSrcIndex, + d5vPidRemapIpDestIndex, d5vPidRemapInPidIndex } + ::= { d5VideoRuleUdpIpPidFilterTable 1 } + + D5VideoRuleUdpIpPidFilterEntry ::= SEQUENCE { + d5vRUdpIpPidFiltRowStatus RowStatus, + d5vRUdpIpPidFiltLastMatchTime TimeStamp, + d5vRUdpIpPidFiltMatchCount Counter32, + d5vRUdpIpPidFiltPersistence D5PersistenceType + } + + d5vRUdpIpPidFiltRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The RowStatus for controlling entries in this table." + ::= { d5VideoRuleUdpIpPidFilterEntry 1 } + + d5vRUdpIpPidFiltLastMatchTime OBJECT-TYPE + SYNTAX TimeStamp + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of sysUpTime when this rule was last matched/used + at run-time. Zero if not-applicable." + ::= { d5VideoRuleUdpIpPidFilterEntry 2 } + + d5vRUdpIpPidFiltMatchCount OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of times this rule was matched/used at run-time. + Zero if not-applicable." + ::= { d5VideoRuleUdpIpPidFilterEntry 3 } + + d5vRUdpIpPidFiltPersistence OBJECT-TYPE + SYNTAX D5PersistenceType + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This is used to toggle the table entry as being volatile or + non-volatile. If set to volatile, it is not saved across + card resets. + " + DEFVAL { nonVolatile } + ::= { d5VideoRuleUdpIpPidFilterEntry 4 } + + d5VideoRuleUdpIpProgRemapTable OBJECT-TYPE + SYNTAX SEQUENCE OF D5VideoRuleUdpIpProgRemapEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Table contains list of udp/ip based configured program + remapping rules." + ::= { d5VideoObjects 20 } + + d5VideoRuleUdpIpProgRemapEntry OBJECT-TYPE + SYNTAX D5VideoRuleUdpIpProgRemapEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "" + INDEX { d5vRUdpIpProgUdpIndex, d5vRUdpIpProgIpSrcIndex, + d5vRUdpIpProgIpDestIndex, d5vRUdpIpProgInProgIndex + } + ::= { d5VideoRuleUdpIpProgRemapTable 1 } + + D5VideoRuleUdpIpProgRemapEntry ::= SEQUENCE { + d5vRUdpIpProgUdpIndex Unsigned32, + d5vRUdpIpProgIpSrcIndex IpAddress, + d5vRUdpIpProgIpDestIndex IpAddress, + d5vRUdpIpProgInProgIndex D5Program, + d5vRUdpIpProgRowStatus RowStatus, + d5vRUdpIpProgOutProg D5Program, + d5vRUdpIpProgMatchLastTime TimeStamp, + d5vRUdpIpProgMatchCount Counter32, + d5vRUdpIpProgPersistence D5PersistenceType, + d5vRUdpIpProgExpectedBitrate Unsigned32 + } + + d5vRUdpIpProgUdpIndex OBJECT-TYPE + SYNTAX Unsigned32 (0..65535) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The destination UDP Port of the incoming TS.(A value of 0 + in a rule means that the udp-port can be ANY value for + pattern-matching)" + ::= { d5VideoRuleUdpIpProgRemapEntry 1 } + + d5vRUdpIpProgIpSrcIndex OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The SRC IP address of the incoming TS.(NOTE: a value of + '0' here indicates a don't care value for + pattern-matching)" + ::= { d5VideoRuleUdpIpProgRemapEntry 2 } + + d5vRUdpIpProgIpDestIndex OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The DEST IP address of the incoming TS.(NOTE: a value of + '0' here indicates a don't care value for + pattern-matching)" + ::= { d5VideoRuleUdpIpProgRemapEntry 3 } + + d5vRUdpIpProgInProgIndex OBJECT-TYPE + SYNTAX D5Program + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The incoming Program value related to this Program + remapping." + ::= { d5VideoRuleUdpIpProgRemapEntry 4 } + + d5vRUdpIpProgRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The RowStatus for controlling entries in this table." + ::= { d5VideoRuleUdpIpProgRemapEntry 5 } + + d5vRUdpIpProgOutProg OBJECT-TYPE + SYNTAX D5Program + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The output Program value related to this Program mapping + rule." + ::= { d5VideoRuleUdpIpProgRemapEntry 6 } + + d5vRUdpIpProgMatchLastTime OBJECT-TYPE + SYNTAX TimeStamp + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of sysUpTime when this rule was last + matched/used at run-time. Zero if not-applicable." + ::= { d5VideoRuleUdpIpProgRemapEntry 7 } + + d5vRUdpIpProgMatchCount OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of times this rule was matched/used at + run-time. Zero if not-applicable." + ::= { d5VideoRuleUdpIpProgRemapEntry 8 } + + d5vRUdpIpProgPersistence OBJECT-TYPE + SYNTAX D5PersistenceType + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This is used to toggle the table entry as being volatile or + non-volatile. If set to volatile, it is not saved across + card resets. + " + DEFVAL { nonVolatile } + ::= { d5VideoRuleUdpIpProgRemapEntry 9 } + + d5vRUdpIpProgExpectedBitrate OBJECT-TYPE + SYNTAX Unsigned32(0..65535) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The expected bitate in Kbps, of the video program. If this + is set it is used to calculate the initial jitter-buffer + size to be used for the program when it is activated. + (may be set to 0 to indicated an unknown value)" + DEFVAL { 0 } + ::= { d5VideoRuleUdpIpProgRemapEntry 10 } + + d5VideoRuleUdpIpPidRemapTable OBJECT-TYPE + SYNTAX SEQUENCE OF D5VideoRuleUdpIpPidRemapEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Table contains list of udp/ip based configured pid + remapping rules." + ::= { d5VideoObjects 21 } + + d5VideoRuleUdpIpPidRemapEntry OBJECT-TYPE + SYNTAX D5VideoRuleUdpIpPidRemapEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "" + INDEX { d5vRUdpIpPidUdpIndex, d5vRUdpIpPidIpSrcIndex, + d5vRUdpIpPidIpDestIndex, d5vRUdpIpPidInPidIndex} + ::= { d5VideoRuleUdpIpPidRemapTable 1 } + + D5VideoRuleUdpIpPidRemapEntry ::= SEQUENCE { + d5vRUdpIpPidUdpIndex Unsigned32, + d5vRUdpIpPidIpSrcIndex IpAddress, + d5vRUdpIpPidIpDestIndex IpAddress, + d5vRUdpIpPidInPidIndex D5PID, + d5vRUdpIpPidRowStatus RowStatus, + d5vRUdpIpPidOutPid D5PID, + d5vRUdpIpPidMatchLastTime TimeStamp, + d5vRUdpIpPidMatchCount Counter32, + d5vRUdpIpPidPersistence D5PersistenceType + } + + d5vRUdpIpPidUdpIndex OBJECT-TYPE + SYNTAX Unsigned32 (0..65535) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The destination UDP Port of the incoming TS.(A value of 0 + in a rule means that the udp-port can be ANY value for + pattern-matching)" + ::= { d5VideoRuleUdpIpPidRemapEntry 1 } + + d5vRUdpIpPidIpSrcIndex OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The SRC IP address of the incoming TS.(NOTE: a value of '0' + here indicates a don't care value for pattern-matching + rules)" + ::= { d5VideoRuleUdpIpPidRemapEntry 2 } + + d5vRUdpIpPidIpDestIndex OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The DEST IP address of the incoming TS.(NOTE: a value of + '0' here indicates a don't care value for pattern-matching + rules)" + ::= { d5VideoRuleUdpIpPidRemapEntry 3 } + + d5vRUdpIpPidInPidIndex OBJECT-TYPE + SYNTAX D5PID + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The incoming PID value related to this PID remapping." + ::= { d5VideoRuleUdpIpPidRemapEntry 4 } + + d5vRUdpIpPidRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The RowStatus for controlling entries in this table." + ::= { d5VideoRuleUdpIpPidRemapEntry 5 } + + d5vRUdpIpPidOutPid OBJECT-TYPE + SYNTAX D5PID + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The output PID value related to this PID mapping rule." + ::= { d5VideoRuleUdpIpPidRemapEntry 6 } + + d5vRUdpIpPidMatchLastTime OBJECT-TYPE + SYNTAX TimeStamp + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of sysUpTime when this rule was last + matched/used at run-time. Zero if not-applicable." + ::= { d5VideoRuleUdpIpPidRemapEntry 7 } + + d5vRUdpIpPidMatchCount OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of times this rule was matched/used at + run-time. Zero if not-applicable." + ::= { d5VideoRuleUdpIpPidRemapEntry 8 } + + d5vRUdpIpPidPersistence OBJECT-TYPE + SYNTAX D5PersistenceType + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This is used to toggle the table entry as being volatile or + non-volatile. If set to volatile, it is not saved across + card resets. + " + DEFVAL { nonVolatile } + ::= { d5VideoRuleUdpIpPidRemapEntry 9 } + + +-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- +-- SI-STREAM table (For controlling statically allocated streams that provide +-- (P)SI tables for the QAM channel out-of-band to the actual +-- video and audio streams +-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- + d5VideoUdpIpSiStreamTable OBJECT-TYPE + SYNTAX SEQUENCE OF D5VideoUdpIpSiStreamEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table displays the statically allocated SI-streams. + SI-streams are dedicated IP streams that provide SI table for + a particular QAM channel. The data in an SI stream is sent to + the QAM without any PID remapping and it is assumed that the + SI-stream does not conflict with any elementary-streams, or + auto-generated (P)SI tables. + SI-streams are typically used when (P)SI table auto-generation + is disabled on the D5. + The variables d5vIpSiConfQamIfIndex and + d5vIpSiConfChanContName are mutually exclusive, where a value + of 0 for ifIndex or 0-length for d5vIpSiConfChanContName can be + used to indicate an unspecified value." + ::= { d5VideoObjects 22 } + + d5VideoUdpIpSiStreamEntry OBJECT-TYPE + SYNTAX D5VideoUdpIpSiStreamEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "" + INDEX { d5vIpUdpSiIndex, d5vIpSrcSiIndex, d5vIpDestSiIndex } + ::= { d5VideoUdpIpSiStreamTable 1 } + + D5VideoUdpIpSiStreamEntry ::= SEQUENCE { + d5vIpUdpSiIndex Unsigned32, + d5vIpSrcSiIndex IpAddress, + d5vIpDestSiIndex IpAddress, + d5vIpSiRowStatus RowStatus, + d5vIpSiTsMibIndex D5TransportStreamIndex, + d5vIpSiConfQamIfIndex InterfaceIndexOrZero, + d5vIpSiConfChanContName D5VideoChannelContainerNameType, + d5vIpSiStreamStatus D5TransportStreamStatus, + d5vIpSiTimeActivated TimeStamp, + d5vIpSiTimeActive Counter32, + d5vIpSiTimeDeactivated TimeStamp, + d5vIpSiPersistence D5PersistenceType, + d5vIpSiCopyback Unsigned32 + } + + d5vIpUdpSiIndex OBJECT-TYPE + SYNTAX Unsigned32 (0..65535) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The destination UDP Port to be mapped to the specified QAM + Channel and Program Number." + ::= { d5VideoUdpIpSiStreamEntry 1 } + + d5vIpSrcSiIndex OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The SRC IP address of the SI TS to be mapped to the + specified QAM Channel and Program Number." + ::= { d5VideoUdpIpSiStreamEntry 2 } + + d5vIpDestSiIndex OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The DEST IP address of the SI TS to be mapped to the + specified QAM Channel and Program Number." + ::= { d5VideoUdpIpSiStreamEntry 3 } + + d5vIpSiRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The RowStatus for controlling entries in this table." + ::= { d5VideoUdpIpSiStreamEntry 4 } + + d5vIpSiTsMibIndex OBJECT-TYPE + SYNTAX D5TransportStreamIndex + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The index of the entry in the d5VideoStreamTable + for corresponding to this table entry." + ::= { d5VideoUdpIpSiStreamEntry 5 } + + d5vIpSiConfQamIfIndex OBJECT-TYPE + SYNTAX InterfaceIndexOrZero + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The ifIndex of the QAM channel that this SI-stream is + configured to be mapped to." + ::= { d5VideoUdpIpSiStreamEntry 6 } + + d5vIpSiConfChanContName OBJECT-TYPE + SYNTAX D5VideoChannelContainerNameType + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The name of the channel-container that this SI-stream + is configured to be mapped to." + ::= { d5VideoUdpIpSiStreamEntry 7 } + + d5vIpSiStreamStatus OBJECT-TYPE + SYNTAX D5TransportStreamStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Current status of this IP SI Transport stream" + ::= { d5VideoUdpIpSiStreamEntry 8 } + + d5vIpSiTimeActivated OBJECT-TYPE + SYNTAX TimeStamp + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of sysUpTime when this stream was last activated. + Zero if not-applicable." + ::= { d5VideoUdpIpSiStreamEntry 9 } + + d5vIpSiTimeActive OBJECT-TYPE + SYNTAX Counter32 + UNITS "seconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total time that MPEG stream has been active." + ::= { d5VideoUdpIpSiStreamEntry 10 } + + d5vIpSiTimeDeactivated OBJECT-TYPE + SYNTAX TimeStamp + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of sysUpTime when this stream was last + deactivated. Zero if not-known." + ::= { d5VideoUdpIpSiStreamEntry 11 } + + d5vIpSiPersistence OBJECT-TYPE + SYNTAX D5PersistenceType + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This is used to toggle the table entry as being volatile or + non-volatile. If set to volatile, it is not saved across + card resets. + " + DEFVAL { nonVolatile } + ::= { d5VideoUdpIpSiStreamEntry 12 } + + d5vIpSiCopyback OBJECT-TYPE + SYNTAX Unsigned32 (0..65535) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This is used to setup the SI stream as an EAS stream. + " + DEFVAL { 0 } + ::= { d5VideoUdpIpSiStreamEntry 13 } + + + +-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- +-- Channel-container tables +-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- + d5VideoChannelContainerTable OBJECT-TYPE + SYNTAX SEQUENCE OF D5VideoChannelContainerEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Table contains list of channel-containers that can be used + to group individual QAM-channels together. Channel-containers + can serve multiple purposes: + - group qam-channels to which an EMM can be multicast. + - group qam-channels to which an input transport-stream + can be replicated. + - ..." + ::= { d5VideoObjects 30 } + + d5VideoChannelContainerEntry OBJECT-TYPE + SYNTAX D5VideoChannelContainerEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "" + INDEX { d5vChanContName } + ::= { d5VideoChannelContainerTable 1 } + + D5VideoChannelContainerEntry ::= SEQUENCE { + d5vChanContName D5VideoChannelContainerNameType, + d5vChanContRowStatus RowStatus, + d5vChanContServiceId D5Program, + d5vChanContPid D5PID, + d5vChanContPersistence D5PersistenceType + } + + d5vChanContName OBJECT-TYPE + SYNTAX D5VideoChannelContainerNameType + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Channel-container identifier." + ::= { d5VideoChannelContainerEntry 1 } + + d5vChanContRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The RowStatus for controlling entries in this table." + ::= { d5VideoChannelContainerEntry 2 } + + d5vChanContServiceId OBJECT-TYPE + SYNTAX D5Program + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Common program-number used for virtual-programs in this + channel-container. + (may be set to 0 to indicate an unspecified value)" + ::= { d5VideoChannelContainerEntry 3 } + + d5vChanContPid OBJECT-TYPE + SYNTAX D5PID + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Common PID used for EMM or PDG data in this channel- + container. + (may be set to 0 to indicate an unspecified value)" + ::= { d5VideoChannelContainerEntry 4 } + + d5vChanContPersistence OBJECT-TYPE + SYNTAX D5PersistenceType + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This is used to toggle the table entry as being volatile or + non-volatile. If set to volatile, it is not saved across + card resets. + " + DEFVAL { nonVolatile } + ::= { d5VideoChannelContainerEntry 5 } + + d5VideoChannelContainerQamTable OBJECT-TYPE + SYNTAX SEQUENCE OF D5VideoChannelContainerQamEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Table contains list of QAM channel-container group memberships. + A single QAM can be a member of multiple replication groups. + A single QAM can also be a member of the same replication + group multiple times, using different output programs. + The index variables d5vChanContQamIfIndex and + d5vChanContQamTsidIndex must be considered mutually exclusive, + where a value of 0 for either ifIndex or TSID can be used to + indicate an unspecified value. + One of, but not both of, these must be non-zero in any + particular row, in order to constitute a valid row-index. + " + ::= { d5VideoObjects 31 } + + d5VideoChannelContainerQamEntry OBJECT-TYPE + SYNTAX D5VideoChannelContainerQamEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "" + INDEX { d5vChanContName, d5vChanContQamIfIndex, + d5vChanContQamTsidIndex, d5vChanContQamProgIndex + } + ::= { d5VideoChannelContainerQamTable 1 } + + D5VideoChannelContainerQamEntry ::= SEQUENCE { + d5vChanContQamIfIndex InterfaceIndexOrZero, + d5vChanContQamTsidIndex Unsigned32, + d5vChanContQamProgIndex D5Program, + d5vChanContQamRowStatus RowStatus, + d5vChanContQamPersistence D5PersistenceType + } + + d5vChanContQamIfIndex OBJECT-TYPE + SYNTAX InterfaceIndexOrZero + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The ifIndex of the QAM channel. + (may be set to 0 to indicated an unspecified value)" + ::= { d5VideoChannelContainerQamEntry 1 } + + d5vChanContQamTsidIndex OBJECT-TYPE + SYNTAX Unsigned32 (0..65535) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The MPEG transport_stream_id of the QAM-channel. + (may be set to 0 to indicated an unspecified value)" + ::= { d5VideoChannelContainerQamEntry 2 } + + d5vChanContQamProgIndex OBJECT-TYPE + SYNTAX D5Program + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The output program number associated with this membership + rule. + (may be set to 0 to indicated an unspecified value)" + ::= { d5VideoChannelContainerQamEntry 3 } + + d5vChanContQamRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The RowStatus for controlling entries in this table." + ::= { d5VideoChannelContainerQamEntry 4 } + + d5vChanContQamPersistence OBJECT-TYPE + SYNTAX D5PersistenceType + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This is used to toggle the table entry as being volatile or + non-volatile. If set to volatile, it is not saved across + card resets. + " + DEFVAL { nonVolatile } + ::= { d5VideoChannelContainerQamEntry 5 } + + + d5VideoChannelContainerVirtProgTable OBJECT-TYPE + SYNTAX SEQUENCE OF D5VideoChannelContainerVirtProgEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Table contains list of virtual programs with their associated + channel-container names. Virtual programs are used for + creating replications where individual input streams are + copied to to multiple concurrent output QAMs/Programs. + (NOTE: a virtual-program can belong to no more than 1 + channel-containers)" + ::= { d5VideoObjects 32 } + + d5VideoChannelContainerVirtProgEntry OBJECT-TYPE + SYNTAX D5VideoChannelContainerVirtProgEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "" + INDEX { d5vChanContVProgUdpIndex, d5vChanContVProgSrcIpIndex, + d5vChanContVProgDestIpIndex } + ::= { d5VideoChannelContainerVirtProgTable 1 } + + D5VideoChannelContainerVirtProgEntry ::= SEQUENCE { + d5vChanContVProgUdpIndex Unsigned32, + d5vChanContVProgSrcIpIndex IpAddress, + d5vChanContVProgDestIpIndex IpAddress, + d5vChanContVProgRowStatus RowStatus, + d5vChanContVProgName D5VideoChannelContainerNameType, + d5vChanContVProgConfProgPassThroughEnabled TruthValue, + d5vChanContVProgConfPidPassThroughEnabled TruthValue, + d5vChanContVProgConfRedundantMulticast TruthValue, + d5vChanContVProgPersistence D5PersistenceType, + d5vChanContVProgExpectedBitrate Unsigned32, + d5vChanContVProgConfVideoSiStreamEnabled TruthValue + } + + d5vChanContVProgUdpIndex OBJECT-TYPE + SYNTAX Unsigned32 (0..65535) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The destination UDP Port of the incoming TS.(A value of 0 + in a rule means that the udp-port can be ANY value for + pattern-matching)" + ::= { d5VideoChannelContainerVirtProgEntry 1 } + + d5vChanContVProgSrcIpIndex OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The SRC IP address of the incoming TS.(NOTE: a value of '0' + here indicates a don't care value for pattern-matching + rules)" + ::= { d5VideoChannelContainerVirtProgEntry 2 } + + d5vChanContVProgDestIpIndex OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The DEST IP address of the incoming TS.(NOTE: a value of + '0' here indicates a don't care value for pattern-matching + rules)" + ::= { d5VideoChannelContainerVirtProgEntry 3 } + + d5vChanContVProgRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The RowStatus for controlling entries in this table." + ::= { d5VideoChannelContainerVirtProgEntry 4 } + + d5vChanContVProgName OBJECT-TYPE + SYNTAX D5VideoChannelContainerNameType + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Channel-container identifier. Must match an entry in + the d5VideoChannelContainerTable table." + ::= { d5VideoChannelContainerVirtProgEntry 5 } + + d5vChanContVProgConfProgPassThroughEnabled OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This can be used to configure default PROG remapping + for this stream. If this is set to TRUE, input PROGs are + mapped to identical output PIDs (as if pass-through + mode were enabled on the QAM). + " + DEFVAL {FALSE} + ::= { d5VideoChannelContainerVirtProgEntry 6 } + + d5vChanContVProgConfPidPassThroughEnabled OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This can be used to configure default PID remapping + for this stream. If this is set to TRUE, input PIDs are + mapped to identical output PIDs (as if pass-through + mode were enabled on the QAM). + " + DEFVAL {FALSE} + ::= { d5VideoChannelContainerVirtProgEntry 7 } + + d5vChanContVProgConfRedundantMulticast OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This can be used to configure a video stream for redundancy + May be set to TRUE only if the d5vIpSrcIndex is set to 0 + and the d5vIpDestIndex is set to a valid multicast address + and the d5vIpUdpIndex is set to a non-zero value. + When this value is set to TRUE, the D5 WAN card doesn't + distinguish between packets with different srcIp values, + where the d5vIpUdpIndex and d5vIpDestIndex match this rule. + " + DEFVAL {FALSE} + ::= { d5VideoChannelContainerVirtProgEntry 8 } + + d5vChanContVProgPersistence OBJECT-TYPE + SYNTAX D5PersistenceType + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This is used to toggle the table entry as being volatile or + non-volatile. If set to volatile, it is not saved across + card resets. + " + DEFVAL { nonVolatile } + ::= { d5VideoChannelContainerVirtProgEntry 9 } + + d5vChanContVProgExpectedBitrate OBJECT-TYPE + SYNTAX Unsigned32(0..65535) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The expected bitate in Kbps, of the video program. If this + is set it is used to calculate the initial jitter-buffer + size to be used for the program when it is activated. + (may be set to 0 to indicated an unknown value)" + DEFVAL { 0 } + ::= { d5VideoChannelContainerVirtProgEntry 10 } + + d5vChanContVProgConfVideoSiStreamEnabled OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Used to configure this virtual-program to be treated as a + video-si-stream." + DEFVAL {FALSE} + ::= { d5VideoChannelContainerVirtProgEntry 11 } + +-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- +-- QAM jitter-buffering tables +-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- + d5VideoQamJitterTable OBJECT-TYPE + SYNTAX SEQUENCE OF D5VideoQamJitterEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This Table contains list of rules that regulate the amount of + jitter buffering in milliseconds that is used used for video + programs. + Can be used to increase jitter buffering so that the D5 will + smooth out video programs that may have a lot of jitter, or + alternatively to decrease jitter buffering so that the latency + through the D5 is reduced. + The low and high bitrate thresholds are not allowed to + overlap between rules that share the same ifIndex and serviceId + ." + ::= { d5VideoObjects 33 } + + d5VideoQamJitterEntry OBJECT-TYPE + SYNTAX D5VideoQamJitterEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "" + INDEX { d5vQamJitterIfIndex, d5vQamJitterServiceId, + d5vQamJitterThreshBitrateLow, d5vQamJitterThreshBitrateHigh + } + ::= { d5VideoQamJitterTable 1 } + + D5VideoQamJitterEntry ::= SEQUENCE { + d5vQamJitterIfIndex InterfaceIndexOrZero, + d5vQamJitterServiceId D5Program, + d5vQamJitterThreshBitrateLow Unsigned32, + d5vQamJitterThreshBitrateHigh Unsigned32, + d5vQamJitterMilliseconds Unsigned32, + d5vQamJitterRowStatus RowStatus, + d5vQamJitterPersistence D5PersistenceType + } + + d5vQamJitterIfIndex OBJECT-TYPE + SYNTAX InterfaceIndexOrZero + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The ifIndex of the QAM channel associated with this rule. + (may be set to 0 to indicated an unspecified value)" + ::= { d5VideoQamJitterEntry 1 } + + d5vQamJitterServiceId OBJECT-TYPE + SYNTAX D5Program + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The output program number associated with this rule. + (may be set to 0 to indicated an unspecified value)" + ::= { d5VideoQamJitterEntry 2 } + + d5vQamJitterThreshBitrateLow OBJECT-TYPE + SYNTAX Unsigned32 (0..65535) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The lower bitate threshold in Kbps, of the video stream(s) + for which this jitter setting is to be used. + (may be set to 0 to indicated an unspecified lower value)" + ::= { d5VideoQamJitterEntry 3 } + + d5vQamJitterThreshBitrateHigh OBJECT-TYPE + SYNTAX Unsigned32 (0..65535) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The upper bitate threshold in Kbps, of the video stream(s) + for which this jitter setting is to be used. + (may be set to 0 to indicated an unspecified upper value)" + ::= { d5VideoQamJitterEntry 4 } + + d5vQamJitterMilliseconds OBJECT-TYPE + SYNTAX Unsigned32 (0..500) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The setting for jitter-buffer length in milliseconds for + video programs matching this rule. + Can be set to a small value to reduce latency through the + box, or set to a higher value to compensate for more + jitter in the input video stream." + ::= { d5VideoQamJitterEntry 5 } + + d5vQamJitterRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The RowStatus for controlling entries in this table." + ::= { d5VideoQamJitterEntry 6 } + + d5vQamJitterPersistence OBJECT-TYPE + SYNTAX D5PersistenceType + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This is used to toggle the table entry as being volatile or + non-volatile. If set to volatile, it is not saved across + card resets. + " + DEFVAL { nonVolatile } + ::= { d5VideoQamJitterEntry 7 } + + + d5VideoQamJitterStatusTable OBJECT-TYPE + SYNTAX SEQUENCE OF D5VideoQamJitterStatusEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This Table contains status information about the QAM dejitter + buffers on a per-program basis. Entries in this table only + persist for the life-time of the active programs, and are + created & deleted on the fly as programs are shutdown & + restarted. The counters are reset when the program is shutdown, + or when the jitter-buffer is reset. + " + ::= { d5VideoObjects 34 } + + d5VideoQamJitterStatusEntry OBJECT-TYPE + SYNTAX D5VideoQamJitterStatusEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "" + INDEX { d5QamJitterStatusIfIndex, d5QamJitterStatusServiceId } + ::= { d5VideoQamJitterStatusTable 1 } + + D5VideoQamJitterStatusEntry ::= SEQUENCE { + d5QamJitterStatusIfIndex InterfaceIndex, + d5QamJitterStatusServiceId D5Program, + d5QamJitterStatusCurrStatus INTEGER, + d5QamJitterStatusUnderflowCount Unsigned32, + d5QamJitterStatusOverflowCount Unsigned32, + d5QamJitterStatusBufferLengthInBytes Unsigned32, + d5QamJitterStatusFixedBufferLength TruthValue, + d5QamJitterStatusBufferLengthInMs Unsigned32, + d5vQamJitterStatusBitrate Unsigned32, + d5QamJitterStatusResetQueue TruthValue, + d5QamJitterStatusBufferSizeInBytes Unsigned32 + } + + d5QamJitterStatusIfIndex OBJECT-TYPE + SYNTAX InterfaceIndex + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The ifIndex of the QAM channel associated with this entry." + ::= { d5VideoQamJitterStatusEntry 1 } + + d5QamJitterStatusServiceId OBJECT-TYPE + SYNTAX D5Program + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The output program number associated with this entry." + ::= { d5VideoQamJitterStatusEntry 2 } + + d5QamJitterStatusCurrStatus OBJECT-TYPE + SYNTAX INTEGER { + idle(1), + fillingBuffer(2), + active(3), + underflow(4), + overflow(5) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The status of the jitter buffer for this program. + idle - waiting for input TS packets + fillingBuffer - waiting for the dejitter buffer to fill + up for normal operation. + active - operating normally, passing traffic. + underflow - not receiving enough traffic, buffer has + been reset. + overflow - receiving too much traffic, buffer has + been reset. + " + ::= { d5VideoQamJitterStatusEntry 3 } + + d5QamJitterStatusUnderflowCount OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of times the jitter buffer has underflowed during + the lifetime of this program." + ::= { d5VideoQamJitterStatusEntry 4 } + + d5QamJitterStatusOverflowCount OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of times the jitter buffer has overflowed during + the lifetime of this program." + ::= { d5VideoQamJitterStatusEntry 5 } + + d5QamJitterStatusBufferLengthInBytes OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of bytes in-use for the jitter buffer of this + program." + ::= { d5VideoQamJitterStatusEntry 6 } + + d5QamJitterStatusFixedBufferLength OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates if the jitter buffer for this program consists + of a fixed number of bytes, or if the QAM-FPGA is + configured to reallocate memory dynamically + as the program-bitrate fluctuates." + ::= { d5VideoQamJitterStatusEntry 7 } + + d5QamJitterStatusBufferLengthInMs OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The size of the jitter buffer for this program in + milliseconds." + ::= { d5VideoQamJitterStatusEntry 8 } + + d5vQamJitterStatusBitrate OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The bitate in Kbps, of this Program. This may have a value + of 0 if the bitrate is not known." + ::= { d5VideoQamJitterStatusEntry 9 } + + d5QamJitterStatusResetQueue OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Write a value of TRUE to empty the jitter buffer, + (re)initialize the active buffer-length to the configured + value in the d5VideoQamJitterTable, and reset the jitter + buffer state back to the initial idle state. + NOTE: resetting the buffer results in a temporary loss + of MPEG output for the affected program since the buffer + is wiped and refilled." + ::= { d5VideoQamJitterStatusEntry 10 } + + d5QamJitterStatusBufferSizeInBytes OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of bytes allocated for the jitter buffer of + this program." + ::= { d5VideoQamJitterStatusEntry 11 } + + +-- ----------------------------------------- +-- d5VideoQamLogTable +-- ----------------------------------------- + +d5VideoQamLogTable OBJECT-TYPE + SYNTAX SEQUENCE OF D5VideoQamLogEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The (conceptual) table listing the router's PIM interfaces. + IGMP and PIM are enabled on all interfaces listed in this + table." + ::= { d5VideoObjects 40 } + +d5VideoQamLogEntry OBJECT-TYPE + SYNTAX D5VideoQamLogEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry (conceptual row) in the d5QamLogTable." + INDEX { d5vQamLogDateTimeIndex,d5vQamLogSubIndex } + ::= { d5VideoQamLogTable 1 } + +D5VideoQamLogEntry ::= SEQUENCE { + d5vQamLogDateTimeIndex DateAndTime, + d5vQamLogSubIndex Unsigned32, + d5vQamLogSlotNum Unsigned32, + d5vQamLogPortNum Unsigned32, + d5vQamLogQamNum Unsigned32, + d5vQamLogState D5VideoQamLogQamState, + d5vQamLogDuration Unsigned32, + d5vQamLogDescription DisplayString +} + +d5vQamLogDateTimeIndex OBJECT-TYPE + SYNTAX DateAndTime + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The Date/Time of event occurance." + ::= { d5VideoQamLogEntry 1 } + +d5vQamLogSubIndex OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Index used to address QAM event logs which occur at the same time." + ::= { d5VideoQamLogEntry 2 } + +d5vQamLogSlotNum OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "QAM card associated with a particular event." + ::= { d5VideoQamLogEntry 3 } + +d5vQamLogPortNum OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "QAM card port number associated with a particular event." + ::= { d5VideoQamLogEntry 4 } + +d5vQamLogQamNum OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "QAM card QAM number associated with a particular event." + ::= { d5VideoQamLogEntry 5 } + +d5vQamLogState OBJECT-TYPE + SYNTAX D5VideoQamLogQamState + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Current state of the Event Log" + ::= { d5VideoQamLogEntry 6 } + +d5vQamLogDuration OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Event Log duration in mSecs (only valid for START/STOP type entries)" + ::= { d5VideoQamLogEntry 7 } + +d5vQamLogDescription OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "QAM event description." + ::= { d5VideoQamLogEntry 8 } + +-- ----------------------------------------- +-- video-si-stream Ghost PID tables +-- ----------------------------------------- + +d5VideoRuleSiStreamGhostPidFilterTable OBJECT-TYPE + SYNTAX SEQUENCE OF D5VideoRuleSiStreamGhostPidFilterEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Table contains list of configured ghost PID filter rules. + . Ghost PIDs can only be used for video-si-streams. The reason + for this being that it's not reasonable to map multiple copies of + the same input PID to a single output PID. Tying ghost-pids to + video-si-stream ensures that only one copy of a particular + ghost-pid will be mapped to any particular QAM-channel at any one + time, since only one video-si-stream can be active on a QAM-channel + at a time. + " + ::= { d5VideoObjects 42 } + + d5VideoRuleSiStreamGhostPidFilterEntry OBJECT-TYPE + SYNTAX D5VideoRuleSiStreamGhostPidFilterEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "" + INDEX { d5vPidRemapInPidIndex } + ::= { d5VideoRuleSiStreamGhostPidFilterTable 1 } + + D5VideoRuleSiStreamGhostPidFilterEntry ::= SEQUENCE { + d5vRSiStreamGhostPidFiltRowStatus RowStatus, + d5vRSiStreamGhostPidFiltLastMatchTime TimeStamp, + d5vRSiStreamGhostPidFiltMatchCount Counter32, + d5vRSiStreamGhostPidFiltPersistence D5PersistenceType + } + + d5vRSiStreamGhostPidFiltRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The RowStatus for controlling entries in this table." + ::= { d5VideoRuleSiStreamGhostPidFilterEntry 1 } + + d5vRSiStreamGhostPidFiltLastMatchTime OBJECT-TYPE + SYNTAX TimeStamp + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of sysUpTime when this rule was last matched/used + at run-time. Zero if not-applicable." + ::= { d5VideoRuleSiStreamGhostPidFilterEntry 2 } + + d5vRSiStreamGhostPidFiltMatchCount OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of times this rule was matched/used at run-time. + Zero if not-applicable." + ::= { d5VideoRuleSiStreamGhostPidFilterEntry 3 } + + d5vRSiStreamGhostPidFiltPersistence OBJECT-TYPE + SYNTAX D5PersistenceType + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This is used to toggle the table entry as being volatile or + non-volatile. If set to volatile, it is not saved across + card resets. + " + DEFVAL { nonVolatile } + ::= { d5VideoRuleSiStreamGhostPidFilterEntry 4 } + +d5VideoRuleQamSiStreamGhostPidFilterTable OBJECT-TYPE + SYNTAX SEQUENCE OF D5VideoRuleQamSiStreamGhostPidFilterEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Table contains list of qam-channel based configured ghost PID rules + . Ghost PIDs can only be used for video-si-streams. The reason + for this being that it's not reasonable to map multiple copies of + the same input PID to a single output PID. Tying ghost-pids to + video-si-stream ensures that only one copy of a particular + ghost-pid will be mapped to any particular QAM-channel at any one + time, since only one video-si-stream can be active on a QAM-channel + at a time. + " + ::= { d5VideoObjects 41 } + + d5VideoRuleQamSiStreamGhostPidFilterEntry OBJECT-TYPE + SYNTAX D5VideoRuleQamSiStreamGhostPidFilterEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "" + INDEX { ifIndex, d5vPidRemapInPidIndex } + ::= { d5VideoRuleQamSiStreamGhostPidFilterTable 1 } + + D5VideoRuleQamSiStreamGhostPidFilterEntry ::= SEQUENCE { + d5vRQamSiStreamGhostPidFiltRowStatus RowStatus, + d5vRQamSiStreamGhostPidFiltLastMatchTime TimeStamp, + d5vRQamSiStreamGhostPidFiltMatchCount Counter32, + d5vRQamSiStreamGhostPidFiltPersistence D5PersistenceType + } + + d5vRQamSiStreamGhostPidFiltRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The RowStatus for controlling entries in this table." + ::= { d5VideoRuleQamSiStreamGhostPidFilterEntry 1 } + + d5vRQamSiStreamGhostPidFiltLastMatchTime OBJECT-TYPE + SYNTAX TimeStamp + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of sysUpTime when this rule was last matched/used + at run-time. Zero if not-applicable." + ::= { d5VideoRuleQamSiStreamGhostPidFilterEntry 2 } + + d5vRQamSiStreamGhostPidFiltMatchCount OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of times this rule was matched/used at run-time. + Zero if not-applicable." + ::= { d5VideoRuleQamSiStreamGhostPidFilterEntry 3 } + + d5vRQamSiStreamGhostPidFiltPersistence OBJECT-TYPE + SYNTAX D5PersistenceType + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This is used to toggle the table entry as being volatile or + non-volatile. If set to volatile, it is not saved across + card resets. + " + DEFVAL { nonVolatile } + ::= { d5VideoRuleQamSiStreamGhostPidFilterEntry 4 } + +-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- +-- QAM ca-system-id descriptor filter tables +-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- + +d5VideoQamCaDescFiltTable OBJECT-TYPE + SYNTAX SEQUENCE OF D5VideoQamCaDescFiltEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This Table contains a list of rules that regulate the filtering + of ca-descriptors from input CAT and PMT tables based on + specific ca-system-id values. + ." + ::= { d5VideoObjects 43 } + + d5VideoQamCaDescFiltEntry OBJECT-TYPE + SYNTAX D5VideoQamCaDescFiltEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "" + INDEX { d5vQamCaDescFiltIfIndex, + d5vQamCaDescFiltSysId + } + ::= { d5VideoQamCaDescFiltTable 1 } + + D5VideoQamCaDescFiltEntry ::= SEQUENCE { + d5vQamCaDescFiltIfIndex InterfaceIndexOrZero, + d5vQamCaDescFiltSysId Unsigned32, + d5vQamCaDescFiltCaDesc INTEGER, + d5vQamCaDescFiltRowStatus RowStatus, + d5vQamCaDescFiltPersistence D5PersistenceType + } + + d5vQamCaDescFiltIfIndex OBJECT-TYPE + SYNTAX InterfaceIndexOrZero + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The ifIndex of the QAM channel associated with this rule. + (may be set to 0 to indicated an unspecified value)" + ::= { d5VideoQamCaDescFiltEntry 1 } + + d5vQamCaDescFiltSysId OBJECT-TYPE + SYNTAX Unsigned32 (0..65535) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The CA-system-ID value associated with this rule." + ::= { d5VideoQamCaDescFiltEntry 2 } + + d5vQamCaDescFiltCaDesc OBJECT-TYPE + SYNTAX INTEGER { + cat-and-pmt(1), + neither(2), + cat-only(3), + pmt-only(4) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Controls the filtering of descriptors from the CAT table." + DEFVAL { neither } + ::= { d5VideoQamCaDescFiltEntry 3 } + + d5vQamCaDescFiltRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The RowStatus for controlling entries in this table." + ::= { d5VideoQamCaDescFiltEntry 4 } + + d5vQamCaDescFiltPersistence OBJECT-TYPE + SYNTAX D5PersistenceType + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This is used to toggle the table entry as being volatile or + non-volatile. If set to volatile, it is not saved across + card resets. + " + DEFVAL { nonVolatile } + ::= { d5VideoQamCaDescFiltEntry 5 } + +-- ----------------------------------------- +-- video-stream Ghost PID tables +-- ----------------------------------------- + + d5VideoRuleStreamGhostPidTable OBJECT-TYPE + SYNTAX SEQUENCE OF D5VideoRuleStreamGhostPidFilterEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Table contains list of configured ghost PID filter rules. + Ghost PIDs may only be used for video-streams and + can be in the range 1 to 8190. + Care must be taken not to map multiple copies of + the same input PID to a single output PID. + " + ::= { d5VideoObjects 45 } + + d5VideoRuleStreamGhostPidFilterEntry OBJECT-TYPE + SYNTAX D5VideoRuleStreamGhostPidFilterEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "" + INDEX { d5vRStreamGhostPidFiltUdpIndex, d5vRStreamGhostPidFiltIpSrcIndex, + d5vRStreamGhostPidFiltIpDestIndex, d5vRStreamGhostPidFiltInPidIndex} + ::= { d5VideoRuleStreamGhostPidTable 1 } + + D5VideoRuleStreamGhostPidFilterEntry ::= SEQUENCE { + d5vRStreamGhostPidFiltUdpIndex Unsigned32, + d5vRStreamGhostPidFiltIpSrcIndex IpAddress, + d5vRStreamGhostPidFiltIpDestIndex IpAddress, + d5vRStreamGhostPidFiltInPidIndex D5PID, + d5vRStreamGhostPidFiltRowStatus RowStatus, + d5vRStreamGhostPidFiltMatchLastTime TimeStamp, + d5vRStreamGhostPidFiltMatchCount Counter32, + d5vRStreamGhostPidFiltPersistence D5PersistenceType + } + + d5vRStreamGhostPidFiltUdpIndex OBJECT-TYPE + SYNTAX Unsigned32 (0..65535) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The destination UDP Port of the incoming TS.(A value of 0 + in a rule means that the udp-port can be ANY value for + pattern-matching)" + ::= { d5VideoRuleStreamGhostPidFilterEntry 1 } + + d5vRStreamGhostPidFiltIpSrcIndex OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The SRC IP address of the incoming TS.(NOTE: a value of '0' + here indicates a don't care value for pattern-matching + rules)" + ::= { d5VideoRuleStreamGhostPidFilterEntry 2 } + + d5vRStreamGhostPidFiltIpDestIndex OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The DEST IP address of the incoming TS.(NOTE: a value of + '0' here indicates a don't care value for pattern-matching + rules)" + ::= { d5VideoRuleStreamGhostPidFilterEntry 3 } + + d5vRStreamGhostPidFiltInPidIndex OBJECT-TYPE + SYNTAX D5PID + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The incoming ghost PID value related to this rule." + ::= { d5VideoRuleStreamGhostPidFilterEntry 4 } + + d5vRStreamGhostPidFiltRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The RowStatus for controlling entries in this table." + ::= { d5VideoRuleStreamGhostPidFilterEntry 5 } + + d5vRStreamGhostPidFiltMatchLastTime OBJECT-TYPE + SYNTAX TimeStamp + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of sysUpTime when this rule was last + matched/used at run-time. Zero if not-applicable." + ::= { d5VideoRuleStreamGhostPidFilterEntry 6 } + + d5vRStreamGhostPidFiltMatchCount OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of times this rule was matched/used at + run-time. Zero if not-applicable." + ::= { d5VideoRuleStreamGhostPidFilterEntry 7 } + + d5vRStreamGhostPidFiltPersistence OBJECT-TYPE + SYNTAX D5PersistenceType + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This is used to toggle the table entry as being volatile or + non-volatile. If set to volatile, it is not saved across + card resets. + " + DEFVAL { nonVolatile } + ::= { d5VideoRuleStreamGhostPidFilterEntry 8 } + + + d5VideoRuleQamStreamGhostPidTable OBJECT-TYPE + SYNTAX SEQUENCE OF D5VideoRuleQamStreamGhostPidFilterEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Table contains list of qam-channel based configured ghost PID rules. + Ghost PIDs may only be used for video-streams and + can be in the range 1 to 8190. + Care must be taken not to map multiple copies of + the same input PID to a single output PID. + " + ::= { d5VideoObjects 44 } + + d5VideoRuleQamStreamGhostPidFilterEntry OBJECT-TYPE + SYNTAX D5VideoRuleQamStreamGhostPidFilterEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "" + INDEX { ifIndex, d5vRStreamGhostPidFiltInPidIndex } + ::= { d5VideoRuleQamStreamGhostPidTable 1 } + + D5VideoRuleQamStreamGhostPidFilterEntry ::= SEQUENCE { + d5vRQamStreamGhostPidFiltRowStatus RowStatus, + d5vRQamStreamGhostPidFiltOutPid D5PID, + d5vRQamStreamGhostPidFiltLastMatchTime TimeStamp, + d5vRQamStreamGhostPidFiltMatchCount Counter32, + d5vRQamStreamGhostPidFiltPersistence D5PersistenceType + } + + d5vRQamStreamGhostPidFiltRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The RowStatus for controlling entries in this table." + ::= { d5VideoRuleQamStreamGhostPidFilterEntry 1 } + + d5vRQamStreamGhostPidFiltOutPid OBJECT-TYPE + SYNTAX D5PID + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The output PID value related to this rule." + ::= { d5VideoRuleQamStreamGhostPidFilterEntry 2 } + + d5vRQamStreamGhostPidFiltLastMatchTime OBJECT-TYPE + SYNTAX TimeStamp + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of sysUpTime when this rule was last + matched/used at run-time. Zero if not-applicable." + ::= { d5VideoRuleQamStreamGhostPidFilterEntry 3 } + + d5vRQamStreamGhostPidFiltMatchCount OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of times this rule was matched/used at + run-time. Zero if not-applicable." + ::= { d5VideoRuleQamStreamGhostPidFilterEntry 4 } + + d5vRQamStreamGhostPidFiltPersistence OBJECT-TYPE + SYNTAX D5PersistenceType + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This is used to toggle the table entry as being volatile or + non-volatile. If set to volatile, it is not saved across + card resets. + " + DEFVAL { nonVolatile } + ::= { d5VideoRuleQamStreamGhostPidFilterEntry 5 } + +END |