diff options
Diffstat (limited to 'MIBS/arris/d5/ARRIS-D5-VIDEO-IP-BUNDLE-MIB')
| -rw-r--r-- | MIBS/arris/d5/ARRIS-D5-VIDEO-IP-BUNDLE-MIB | 178 |
1 files changed, 178 insertions, 0 deletions
diff --git a/MIBS/arris/d5/ARRIS-D5-VIDEO-IP-BUNDLE-MIB b/MIBS/arris/d5/ARRIS-D5-VIDEO-IP-BUNDLE-MIB new file mode 100644 index 0000000..727dd34 --- /dev/null +++ b/MIBS/arris/d5/ARRIS-D5-VIDEO-IP-BUNDLE-MIB @@ -0,0 +1,178 @@ +ARRIS-D5-VIDEO-IP-BUNDLE-MIB DEFINITIONS ::= BEGIN + +IMPORTS + arrisD5UEQam + FROM ARRIS-MIB + MODULE-IDENTITY, + OBJECT-TYPE, + Unsigned32 + FROM SNMPv2-SMI + RowStatus, + TruthValue + FROM SNMPv2-TC + InterfaceIndex + FROM IF-MIB; + + + arrisD5UEQamIpBundleMib MODULE-IDENTITY + LAST-UPDATED "201005270000Z" -- 27th MAY 2010 + ORGANIZATION "Arris Group" + CONTACT-INFO + " Software Development + Postal: ARRIS Group + 3871 Lakefield Drive + Suwanee, GA 30024 + USA + Tel: 800-469-6569 + Fax: 678-473-8770" + + DESCRIPTION + "This MIB manages the ip-bundles on the + ARRIS D5 product" + ::= { arrisD5UEQam 16 } + + d5UEQamIpBundlePolicy OBJECT-TYPE + SYNTAX INTEGER { + revertive(1), + nonrevertive(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Configure the ip bundle policy to be revertive or non-revertive." + ::= { arrisD5UEQamIpBundleMib 1 } + + d5UEQamIpBundlePolicyRevertiveTimeout OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Configure the ip bundle policy to be revertive timeout interval in seconds. + Setting this object to non zero will also turn on the revertive policy. + Setting this to a zero value will not turn off revertive policy if on." + ::= { arrisD5UEQamIpBundleMib 2 } + + d5UEQamIpBundleRevertTo OBJECT-TYPE + SYNTAX INTEGER { + none(0), + gig1(1), + gig2(2), + gig3(3), + gig4(4) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Control for administratively reverting to the backup port from the + primary port identified by the ifIndex." + ::= { arrisD5UEQamIpBundleMib 3 } + + d5UEQamIpBundleRevertFrom OBJECT-TYPE + SYNTAX INTEGER { + none(0), + gig1(1), + gig2(2), + gig3(3), + gig4(4) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Control for administratively reverting from the backup port to the + primary port identified by the ifIndex." + ::= { arrisD5UEQamIpBundleMib 4 } + +-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- +-- IP-BUNDLE TABLE +-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- + d5UEQamIpBundleTable OBJECT-TYPE + SYNTAX SEQUENCE OF D5UEQamIpBundleEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Arris UEQ Proprietry Ip Bundle Table" + ::= { arrisD5UEQamIpBundleMib 5 } + + d5UEQamIpBundleEntry OBJECT-TYPE + SYNTAX D5UEQamIpBundleEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A row in the d5UEQamIpBundleTable. + An entry in this table exists for each gigabit + port that is backed up by another gigabit port" + INDEX {d5UEQamIpBundlePrimaryPort} + ::= { d5UEQamIpBundleTable 1 } + + D5UEQamIpBundleEntry ::= SEQUENCE { + d5UEQamIpBundlePrimaryPort INTEGER, + d5UEQamIpBundleBackUpPort INTEGER, + d5UEQamIpBundlePrimaryFailedOver TruthValue, + d5UEQamIpBundlePrimaryLinkUp TruthValue, + d5UEQamIpBundleBackupLinkUp TruthValue, + d5UEQamIpBundleStatus RowStatus + } + + d5UEQamIpBundlePrimaryPort OBJECT-TYPE + SYNTAX INTEGER { + gig1(1), + gig2(2), + gig3(3), + gig4(4) + } + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "ifIndex of a primary port in the ip bundle" + ::= { d5UEQamIpBundleEntry 1 } + + d5UEQamIpBundleBackUpPort OBJECT-TYPE + SYNTAX INTEGER { + gig1(1), + gig2(2), + gig3(3), + gig4(4), + fe1(5) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "ifIndex of the backup port in the ip bundle" + ::= { d5UEQamIpBundleEntry 2 } + + d5UEQamIpBundlePrimaryFailedOver OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "states if the primary port is currently being backed up + by the backup port" + ::= { d5UEQamIpBundleEntry 3 } + + d5UEQamIpBundlePrimaryLinkUp OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "states if the primary port's line protocol is currently up" + ::= { d5UEQamIpBundleEntry 4 } + + d5UEQamIpBundleBackupLinkUp OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "states if the primary port's line protocol is currently up" + ::= { d5UEQamIpBundleEntry 5 } + + d5UEQamIpBundleStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Controls and reflects the status of rows in this table." + ::= { d5UEQamIpBundleEntry 6 } + + + +END |