diff options
Diffstat (limited to 'MIBS/allied/AT-INSTALL-MIB')
| -rw-r--r-- | MIBS/allied/AT-INSTALL-MIB | 448 |
1 files changed, 448 insertions, 0 deletions
diff --git a/MIBS/allied/AT-INSTALL-MIB b/MIBS/allied/AT-INSTALL-MIB new file mode 100644 index 0000000..d10b25f --- /dev/null +++ b/MIBS/allied/AT-INSTALL-MIB @@ -0,0 +1,448 @@ +-- ============================================================================ +-- AT-ETH.MIB, Allied Telesis enterprise MIB: INSTALL +-- +-- Extracted from ATROUTER.MIB of pre 2.9.1 release +-- +-- June 2006, Stan Xiang +-- +-- Copyright (c) 2006 by Allied Telesis, Inc. +-- All rights reserved. +-- +-- ============================================================================ + +AT-INSTALL-MIB DEFINITIONS ::= BEGIN + +IMPORTS + MODULE-IDENTITY, + OBJECT-TYPE, + NOTIFICATION-TYPE + FROM SNMPv2-SMI + + DisplayString, + TruthValue + FROM SNMPv2-TC + + ifIndex + FROM IF-MIB + + modules, + DisplayStringUnsized + FROM AT-SMI-MIB +; + +install MODULE-IDENTITY + LAST-UPDATED "200606281222Z" + ORGANIZATION "Allied Telesis, Inc" + CONTACT-INFO + "http://www.alliedtelesis.com" + DESCRIPTION + "This MIB file contains definitions of managed objects for the + INSTALL module. " + + REVISION "200606281222Z" +DESCRIPTION + "Initial Revision" + +::= { modules 49 } + +-- The install group. This group contains information relating to the install module in the +-- router. + +-- The install table. This table controls the software release and patch +-- running in the router. + +installTable OBJECT-TYPE + SYNTAX SEQUENCE OF InstallEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The list of install configurations for the router." + ::= { install 1 } + +installEntry OBJECT-TYPE + SYNTAX InstallEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in the list of install configurations." + INDEX { instIndex } + ::= { installTable 1 } + +InstallEntry ::= + SEQUENCE { + instIndex + INTEGER, + instRelDevice + INTEGER, + instRelName + DisplayString, + instRelMajor + INTEGER, + instRelMinor + INTEGER, + instPatDevice + INTEGER, + instPatName + DisplayString, + instRelInterim + INTEGER, + instRelExists + INTEGER, + instPatExists + INTEGER + } + +instIndex OBJECT-TYPE + SYNTAX INTEGER { + temporary(1), + preferred(2), + default(3), + current(4) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The index for the install table. There are four install + configurations defined in the router, default, preferred, + temporary and current. The router will attempt to use these + in the order temporary, preferred, default when it boots. + An install that is undefined will be skipped, an install + which points to a file which is not present will be skipped. + When the temporary install is used, the information is deleted. + The current configuration shows what the router currently + has installed." + ::= { installEntry 1 } + +instRelDevice OBJECT-TYPE + SYNTAX INTEGER { + none(1), + eprom(2), + flash(3) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The device for the release in the install. If the device is + flash the file for the release is given in instRelName. Devices + none(1) or flash(3) are invalid for the default(3) release." + ::= { installEntry 2 } + +instRelName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The file name for the release in the install, if the + instRelDevice is flash(3). If the instRelDevice is none(1) or + eprom(2), this object should be a null string." + ::= { installEntry 3 } + +instRelMajor OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The major release number for this install. This information is + obtained by the router when the other elements in the row are + set and is thus not directly set by management. If the release number + is a.b.c, the major release number is a." + ::= { installEntry 4 } + +instRelMinor OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The minor release number for this install. This information is + obtained by the router when the other elements in the row are + set and is thus not directly set by management. If the release number + is a.b.c, the major release number is b." + ::= { installEntry 5 } + +instPatDevice OBJECT-TYPE + SYNTAX INTEGER { + none(1), + flash(3), + nvs(4) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The device for the patch in the install. The file for the + patch is given in instPatName unless the device is none(1)." + ::= { installEntry 6 } + +instPatName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The file name for the patch in the install." + ::= { installEntry 7 } + +instRelInterim OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The interim release number for this install. This information is + obtained by the router when the other elements in the row are + set and is thus not directly set by management. If the release number + is a.b.c, the major release number is c. If the release number is a.b, + the interim release number is 0." + ::= { installEntry 8 } + +instRelExists OBJECT-TYPE + SYNTAX INTEGER { + true(1), + false(2) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates if the release file exists or not. true(1) means it exists, false(2) means it doesn't." + ::= { installEntry 9 } + +instPatExists OBJECT-TYPE + SYNTAX INTEGER { + true(1), + false(2) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates if the patch file exists or not. true(1) means it exists, false(2) means it doesn't" + + ::= { installEntry 10 } + +-- The install history table. Each element is a descriptive line that tells +-- of part of the install history of the last router reboot. + +installHistoryTable OBJECT-TYPE + SYNTAX SEQUENCE OF InstallHistoryEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The table of descriptions of events in the install history of + the router." + ::= { install 2 } + +installHistoryEntry OBJECT-TYPE + SYNTAX InstallHistoryEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A single line describing part of the install history of the + router." + INDEX { instHistIndex } + ::= { installHistoryTable 1 } + +InstallHistoryEntry ::= + SEQUENCE { + instHistIndex + INTEGER, + instHistLine + DisplayString + } + +instHistIndex OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The index of this event in the install history. Indices run + from 1 to the maximum number. The maximum number is not + available as a managed object so this table will have to be + traversed in order to find out how large it is." + ::= { installHistoryEntry 1 } + +instHistLine OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A line of text describing a single event in the install + history of the router." + ::= { installHistoryEntry 2 } + +-- The configuration file + +configFile OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The name of the file that the router will configure from at + boot. The format of the name is the same as that for fileName + described above. If the configuration file name is a zero + length string, then there is no configuration file defined in + the router." + ::= { install 3 } + +-- The release licence table. This table contains licences for releases of +-- router software stored in flash. + +licenceTable OBJECT-TYPE + SYNTAX SEQUENCE OF LicenceEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The list of release licences in the router." + ::= { install 4 } + +licenceEntry OBJECT-TYPE + SYNTAX LicenceEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in the list of release licences." + INDEX { licenceIndex } + ::= { licenceTable 1 } + +LicenceEntry ::= + SEQUENCE { + licenceIndex + INTEGER, + licenceStatus + INTEGER, + licenceRelease + DisplayString, + licenceMajor + INTEGER, + licenceMinor + INTEGER, + licencePassword + DisplayStringUnsized, + licenceExpiry + DisplayString, + licenceInterim + INTEGER + } + +licenceIndex OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A unique licence index. Licence indices are recalculated every + time the router reboots to reflect the current licences on the + router. As licences are added, new indices are allocated to the + new licences." + ::= { licenceEntry 1 } + +licenceStatus OBJECT-TYPE + SYNTAX INTEGER { + ok(1), -- file exists and is OK + deleting(2) -- delete the file when this value written + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The status of the file. When read, this object will always + return a value of ok(1), since the object will not exist if the + value is deleting(2). Write the value deleting(2) to this + object to delete the file." + ::= { licenceEntry 2 } + +licenceRelease OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The file name for the release whose licence this is." + ::= { licenceEntry 3 } + +licenceMajor OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The major release number for the release whose licence this is." + ::= { licenceEntry 4 } + +licenceMinor OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The minor release number for the release whose licence this is." + ::= { licenceEntry 5 } + +licencePassword OBJECT-TYPE + SYNTAX DisplayStringUnsized (SIZE (12)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The password for this release. The password is a string of hex + digits." + ::= { licenceEntry 6 } + +licenceExpiry OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A human-readable string that gives the expiry date of this + licence." + ::= { licenceEntry 7 } + +licenceInterim OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The interim release number for the release whose licence this is." + ::= { licenceEntry 8 } + +-- The create configuration file + +createConfigFile OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The name of a file to create containing the current router configuration. A + read from this variable will return the same as the variable configFile. Thus + to save the current configuration in the current configuration file, read + createConfigFile first, then write the result back to createConfigFile. If + this variable is written with the name of an existing file, the file will be + replaced with the current configuration." + ::= { install 5 } + +-- configuration file exists? + +configFileExist OBJECT-TYPE + SYNTAX INTEGER { + true(1), + false(2) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates if the boot configuration file exists or not. true(1) + means it exists, false(2) means it doesn't" + ::= { install 6 } + +installTrap OBJECT IDENTIFIER ::= { install 0 } +configFileExistTrap NOTIFICATION-TYPE + OBJECTS { configFileExist } + STATUS current + DESCRIPTION + "This trap is generated when the boot file is detected as + missing" + ::= { installTrap 1} + +-- The current configuration file + +currentConfigFile OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The name of the file that the router is currently configured + with. The format of the name is the same as that for fileName + described above. If the current configuration file name is a zero + length string, then there is no current configuration file defined in + the router." + ::= { install 7 } +END |