diff options
Diffstat (limited to 'MIBS/VRRP-MIB')
| -rw-r--r-- | MIBS/VRRP-MIB | 792 |
1 files changed, 792 insertions, 0 deletions
diff --git a/MIBS/VRRP-MIB b/MIBS/VRRP-MIB new file mode 100644 index 0000000..81a2f74 --- /dev/null +++ b/MIBS/VRRP-MIB @@ -0,0 +1,792 @@ +VRRP-MIB DEFINITIONS ::= BEGIN + + IMPORTS + MODULE-IDENTITY, OBJECT-TYPE, + NOTIFICATION-TYPE, Counter32, + Integer32, IpAddress, mib-2 FROM SNMPv2-SMI + + TEXTUAL-CONVENTION, RowStatus, + MacAddress, TruthValue, TimeStamp FROM SNMPv2-TC + + MODULE-COMPLIANCE, OBJECT-GROUP, + NOTIFICATION-GROUP FROM SNMPv2-CONF + ifIndex FROM IF-MIB; + + + vrrpMIB MODULE-IDENTITY + LAST-UPDATED "200003030000Z" + ORGANIZATION "IETF VRRP Working Group" + CONTACT-INFO + "Brian R. Jewell + Postal: Copper Mountain Networks, Inc. + 2470 Embarcadero Way + Palo Alto, California 94303 + Tel: +1 650 687 3367 + E-Mail: bjewell@coppermountain.com" + + DESCRIPTION + "This MIB describes objects used for managing Virtual Router + Redundancy Protocol (VRRP) routers." + REVISION "200003030000Z" -- 03 Mar 2000 + DESCRIPTION "Initial version as published in RFC 2787." + ::= { mib-2 68 } + +-- ******************************************************************* +-- Textual Conventions +-- ******************************************************************* + + VrId ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "A number which, along with an interface index (ifIndex), + serves to uniquely identify a virtual router on a given VRRP + router. A set of one or more associated addresses is assigned + to a VRID." + SYNTAX Integer32 (1..255) + +-- ******************************************************************* +-- VRRP MIB Groups +-- ******************************************************************* + + vrrpOperations OBJECT IDENTIFIER ::= { vrrpMIB 1 } + vrrpStatistics OBJECT IDENTIFIER ::= { vrrpMIB 2 } + vrrpConformance OBJECT IDENTIFIER ::= { vrrpMIB 3 } + + +-- ******************************************************************* +-- Start of MIB objects +-- ******************************************************************* + + vrrpNodeVersion OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This value identifies the particular version of the VRRP + supported by this node." + ::= { vrrpOperations 1 } + + vrrpNotificationCntl OBJECT-TYPE + SYNTAX INTEGER { + enabled (1), + disabled (2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Indicates whether the VRRP-enabled router will generate + SNMP traps for events defined in this MIB. 'Enabled' + results in SNMP traps; 'disabled', no traps are sent." + DEFVAL { enabled } + ::= { vrrpOperations 2 } + +-- ******************************************************************* +-- VRRP Operations Table +-- ******************************************************************* + + vrrpOperTable OBJECT-TYPE + SYNTAX SEQUENCE OF VrrpOperEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Operations table for a VRRP router which consists of a + sequence (i.e., one or more conceptual rows) of + 'vrrpOperEntry' items." + ::= { vrrpOperations 3 } + + vrrpOperEntry OBJECT-TYPE + SYNTAX VrrpOperEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in the vrrpOperTable containing the operational + characteristics of a virtual router. On a VRRP router, + a given virtual router is identified by a combination + of the IF index and VRID. + + Rows in the table cannot be modified unless the value + of `vrrpOperAdminState' is `disabled' and the + `vrrpOperState' has transitioned to `initialize'." + + INDEX { ifIndex, vrrpOperVrId } + ::= { vrrpOperTable 1 } + + VrrpOperEntry ::= + SEQUENCE { + vrrpOperVrId + VrId, + vrrpOperVirtualMacAddr + MacAddress, + vrrpOperState + INTEGER, + vrrpOperAdminState + INTEGER, + vrrpOperPriority + Integer32, + vrrpOperIpAddrCount + Integer32, + vrrpOperMasterIpAddr + IpAddress, + vrrpOperPrimaryIpAddr + IpAddress, + vrrpOperAuthType + INTEGER, + vrrpOperAuthKey + OCTET STRING, + vrrpOperAdvertisementInterval + Integer32, + vrrpOperPreemptMode + TruthValue, + vrrpOperVirtualRouterUpTime + TimeStamp, + vrrpOperProtocol + INTEGER, + vrrpOperRowStatus + RowStatus + } + + vrrpOperVrId OBJECT-TYPE + SYNTAX VrId + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This object contains the Virtual Router Identifier (VRID)." + ::= { vrrpOperEntry 1 } + + vrrpOperVirtualMacAddr OBJECT-TYPE + SYNTAX MacAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The virtual MAC address of the virtual router. Although this + object can be derived from the 'vrrpOperVrId' object, it is + defined so that it is easily obtainable by a management + application and can be included in VRRP-related SNMP traps." + ::= { vrrpOperEntry 2 } + + vrrpOperState OBJECT-TYPE + SYNTAX INTEGER { + initialize(1), + backup(2), + master(3) + } + MAX-ACCESS read-only + STATUS current + + DESCRIPTION + "The current state of the virtual router. This object has + three defined values: + + - `initialize', which indicates that all the + virtual router is waiting for a startup event. + + - `backup', which indicates the virtual router is + monitoring the availability of the master router. + + - `master', which indicates that the virtual router + is forwarding packets for IP addresses that are + associated with this router. + + Setting the `vrrpOperAdminState' object (below) initiates + transitions in the value of this object." + ::= { vrrpOperEntry 3 } + + vrrpOperAdminState OBJECT-TYPE + SYNTAX INTEGER { + up(1), + down(2) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object will enable/disable the virtual router + function. Setting the value to `up', will transition + the state of the virtual router from `initialize' to `backup' + or `master', depending on the value of `vrrpOperPriority'. + Setting the value to `down', will transition the + router from `master' or `backup' to `initialize'. State + transitions may not be immediate; they sometimes depend on + other factors, such as the interface (IF) state. + + The `vrrpOperAdminState' object must be set to `down' prior + to modifying the other read-create objects in the conceptual + row. The value of the `vrrpOperRowStatus' object (below) + must be `active', signifying that the conceptual row + is valid (i.e., the objects are correctly set), + in order for this object to be set to `up'." + DEFVAL { down } + ::= { vrrpOperEntry 4 } + + vrrpOperPriority OBJECT-TYPE + SYNTAX Integer32 (0..255) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object specifies the priority to be used for the + virtual router master election process. Higher values imply + higher priority. + + A priority of '0', although not settable, is sent by + the master router to indicate that this router has ceased + to participate in VRRP and a backup virtual router should + transition to become a new master. + + A priority of 255 is used for the router that owns the + associated IP address(es)." + DEFVAL { 100 } + ::= { vrrpOperEntry 5 } + + vrrpOperIpAddrCount OBJECT-TYPE + SYNTAX Integer32 (0..255) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of IP addresses that are associated with this + virtual router. This number is equal to the number of rows + in the vrrpAssoIpAddrTable that correspond to a given IF + index/VRID pair." + ::= { vrrpOperEntry 6 } + + vrrpOperMasterIpAddr OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The master router's real (primary) IP address. This is + the IP address listed as the source in VRRP advertisement + last received by this virtual router." + ::= { vrrpOperEntry 7 } + + vrrpOperPrimaryIpAddr OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "In the case where there is more than one IP address for + a given `ifIndex', this object is used to specify the IP + address that will become the `vrrpOperMasterIpAddr', should + the virtual router transition from backup to master. If + this object is set to 0.0.0.0, the IP address which is + numerically lowest will be selected." + DEFVAL { '00000000'H } -- 0.0.0.0 + ::= { vrrpOperEntry 8 } + + vrrpOperAuthType OBJECT-TYPE + SYNTAX INTEGER { + noAuthentication(1), -- VRRP protocol exchanges are not + -- authenticated. + simpleTextPassword(2), -- Exchanges are authenticated by a + -- clear text password. + ipAuthenticationHeader(3) -- Exchanges are authenticated using + -- the IP authentication header. + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Authentication type used for VRRP protocol exchanges between + virtual routers. This value of this object is the same for a + given ifIndex. + + New enumerations to this list can only be added via a new + RFC on the standards track." + DEFVAL { noAuthentication } + ::= { vrrpOperEntry 9 } + + vrrpOperAuthKey OBJECT-TYPE + SYNTAX OCTET STRING (SIZE (0..16)) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The Authentication Key. This object is set according to + the value of the 'vrrpOperAuthType' object + ('simpleTextPassword' or 'ipAuthenticationHeader'). If the + length of the value is less than 16 octets, the agent will + left adjust and zero fill to 16 octets. The value of this + object is the same for a given ifIndex. + + When read, vrrpOperAuthKey always returns an Octet String + of length zero." + ::= { vrrpOperEntry 10 } + + vrrpOperAdvertisementInterval OBJECT-TYPE + SYNTAX Integer32 (1..255) + UNITS "seconds" + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The time interval, in seconds, between sending + advertisement messages. Only the master router sends + VRRP advertisements." + DEFVAL { 1 } + ::= { vrrpOperEntry 11 } + + vrrpOperPreemptMode OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Controls whether a higher priority virtual router will + preempt a lower priority master." + DEFVAL { true } + ::= { vrrpOperEntry 12 } + + vrrpOperVirtualRouterUpTime OBJECT-TYPE + SYNTAX TimeStamp + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This is the value of the `sysUpTime' object when this + virtual router (i.e., the `vrrpOperState') transitioned + out of `initialized'." + ::= { vrrpOperEntry 13 } + + vrrpOperProtocol OBJECT-TYPE + SYNTAX INTEGER { + ip (1), + bridge (2), + decnet (3), + other (4) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The particular protocol being controlled by this Virtual + Router. + + New enumerations to this list can only be added via a new + RFC on the standards track." + DEFVAL { ip } + ::= { vrrpOperEntry 14 } + + vrrpOperRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The row status variable, used in accordance to installation + and removal conventions for conceptual rows. The rowstatus of + a currently active row in the vrrpOperTable is constrained + by the operational state of the corresponding virtual router. + When `vrrpOperRowStatus' is set to active(1), no other + objects in the conceptual row, with the exception of + `vrrpOperAdminState', can be modified. Prior to setting the + `vrrpOperRowStatus' object from `active' to a different value, + the `vrrpOperAdminState' object must be set to `down' and the + `vrrpOperState' object be transitioned to `initialize'. + + To create a row in this table, a manager sets this object + to either createAndGo(4) or createAndWait(5). Until instances + of all corresponding columns are appropriately configured, + the value of the corresponding instance of the `vrrpOperRowStatus' + column will be read as notReady(3). + In particular, a newly created row cannot be made active(1) + until (minimally) the corresponding instance of + `vrrpOperVrId' has been set and there is at least one active + row in the `vrrpAssoIpAddrTable' defining an associated + IP address for the virtual router." + ::= { vrrpOperEntry 15 } + + +-- ******************************************************************* +-- VRRP Associated IP Address Table +-- ******************************************************************* + + vrrpAssoIpAddrTable OBJECT-TYPE + SYNTAX SEQUENCE OF VrrpAssoIpAddrEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The table of addresses associated with this virtual router." + ::= { vrrpOperations 4 } + + vrrpAssoIpAddrEntry OBJECT-TYPE + SYNTAX VrrpAssoIpAddrEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in the table contains an IP address that is + associated with a virtual router. The number of rows for + a given ifIndex and VrId will equal the number of IP + addresses associated (e.g., backed up) by the virtual + router (equivalent to 'vrrpOperIpAddrCount'). + + Rows in the table cannot be modified unless the value + of `vrrpOperAdminState' is `disabled' and the + `vrrpOperState' has transitioned to `initialize'." + + INDEX { ifIndex, vrrpOperVrId, vrrpAssoIpAddr } + ::= { vrrpAssoIpAddrTable 1 } + + VrrpAssoIpAddrEntry ::= + SEQUENCE { + vrrpAssoIpAddr + IpAddress, + vrrpAssoIpAddrRowStatus + RowStatus + } + + vrrpAssoIpAddr OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The assigned IP addresses that a virtual router is + responsible for backing up." + ::= { vrrpAssoIpAddrEntry 1 } + + vrrpAssoIpAddrRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The row status variable, used according to installation + and removal conventions for conceptual rows. Setting this + object to active(1) or createAndGo(4) results in the + addition of an associated address for a virtual router. + Destroying the entry or setting it to notInService(2) + removes the associated address from the virtual router. + The use of other values is implementation-dependent." + ::= { vrrpAssoIpAddrEntry 2 } + + +-- ******************************************************************* +-- VRRP Router Statistics +-- ******************************************************************* + + vrrpRouterChecksumErrors OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of VRRP packets received with an invalid + VRRP checksum value." + ::= { vrrpStatistics 1 } + + vrrpRouterVersionErrors OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of VRRP packets received with an unknown + or unsupported version number." + ::= { vrrpStatistics 2 } + + vrrpRouterVrIdErrors OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of VRRP packets received with an invalid + VRID for this virtual router." + ::= { vrrpStatistics 3 } + +-- ******************************************************************* +-- VRRP Router Statistics Table +-- ******************************************************************* + + vrrpRouterStatsTable OBJECT-TYPE + SYNTAX SEQUENCE OF VrrpRouterStatsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Table of virtual router statistics." + ::= { vrrpStatistics 4 } + + vrrpRouterStatsEntry OBJECT-TYPE + SYNTAX VrrpRouterStatsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in the table, containing statistics information + about a given virtual router." + AUGMENTS { vrrpOperEntry } + ::= { vrrpRouterStatsTable 1 } + + VrrpRouterStatsEntry ::= + SEQUENCE { + vrrpStatsBecomeMaster + Counter32, + vrrpStatsAdvertiseRcvd + Counter32, + vrrpStatsAdvertiseIntervalErrors + Counter32, + vrrpStatsAuthFailures + Counter32, + vrrpStatsIpTtlErrors + Counter32, + vrrpStatsPriorityZeroPktsRcvd + Counter32, + vrrpStatsPriorityZeroPktsSent + Counter32, + vrrpStatsInvalidTypePktsRcvd + Counter32, + vrrpStatsAddressListErrors + Counter32, + vrrpStatsInvalidAuthType + Counter32, + vrrpStatsAuthTypeMismatch + Counter32, + vrrpStatsPacketLengthErrors + Counter32 + } + + vrrpStatsBecomeMaster OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of times that this virtual router's state + has transitioned to MASTER." + ::= { vrrpRouterStatsEntry 1 } + + vrrpStatsAdvertiseRcvd OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of VRRP advertisements received by this + virtual router." + ::= { vrrpRouterStatsEntry 2 } + + vrrpStatsAdvertiseIntervalErrors OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of VRRP advertisement packets received + for which the advertisement interval is different than the + one configured for the local virtual router." + ::= { vrrpRouterStatsEntry 3 } + + vrrpStatsAuthFailures OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of VRRP packets received that do not pass + the authentication check." + ::= { vrrpRouterStatsEntry 4 } + + vrrpStatsIpTtlErrors OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of VRRP packets received by the virtual + router with IP TTL (Time-To-Live) not equal to 255." + ::= { vrrpRouterStatsEntry 5 } + + vrrpStatsPriorityZeroPktsRcvd OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of VRRP packets received by the virtual + router with a priority of '0'." + ::= { vrrpRouterStatsEntry 6 } + + vrrpStatsPriorityZeroPktsSent OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of VRRP packets sent by the virtual router + with a priority of '0'." + ::= { vrrpRouterStatsEntry 7 } + + vrrpStatsInvalidTypePktsRcvd OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of VRRP packets received by the virtual router + with an invalid value in the 'type' field." + ::= { vrrpRouterStatsEntry 8 } + + vrrpStatsAddressListErrors OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of packets received for which the address + list does not match the locally configured list for the + virtual router." + ::= { vrrpRouterStatsEntry 9 } + + vrrpStatsInvalidAuthType OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of packets received with an unknown + authentication type." + ::= { vrrpRouterStatsEntry 10 } + + vrrpStatsAuthTypeMismatch OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of packets received with 'Auth Type' not + equal to the locally configured authentication method + (`vrrpOperAuthType')." + ::= { vrrpRouterStatsEntry 11 } + + vrrpStatsPacketLengthErrors OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of packets received with a packet length + less than the length of the VRRP header." + ::= { vrrpRouterStatsEntry 12 } + +-- ******************************************************************* +-- Trap Definitions +-- ******************************************************************* + + vrrpNotifications OBJECT IDENTIFIER ::= { vrrpMIB 0 } + + vrrpTrapPacketSrc OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "The IP address of an inbound VRRP packet. Used by + vrrpTrapAuthFailure trap." + ::= { vrrpOperations 5 } + + vrrpTrapAuthErrorType OBJECT-TYPE + SYNTAX INTEGER { + invalidAuthType (1), + authTypeMismatch (2), + authFailure (3) + } + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "Potential types of configuration conflicts. + Used by vrrpAuthFailure trap." + ::= { vrrpOperations 6 } + + vrrpTrapNewMaster NOTIFICATION-TYPE + OBJECTS { vrrpOperMasterIpAddr + } + STATUS current + DESCRIPTION + "The newMaster trap indicates that the sending agent + has transitioned to 'Master' state." + ::= { vrrpNotifications 1 } + + vrrpTrapAuthFailure NOTIFICATION-TYPE + OBJECTS { vrrpTrapPacketSrc, + vrrpTrapAuthErrorType + } + STATUS current + DESCRIPTION + "A vrrpAuthFailure trap signifies that a packet has + been received from a router whose authentication key + or authentication type conflicts with this router's + authentication key or authentication type. Implementation + of this trap is optional." + ::= { vrrpNotifications 2 } + + +-- ******************************************************************* +-- Conformance Information +-- ******************************************************************* + + vrrpMIBCompliances OBJECT IDENTIFIER ::= { vrrpConformance 1 } + vrrpMIBGroups OBJECT IDENTIFIER ::= { vrrpConformance 2 } + +-- ................................................................... +-- Compliance Statements +-- ................................................................... + + vrrpMIBCompliance MODULE-COMPLIANCE + STATUS current + DESCRIPTION + "The core compliance statement for all VRRP implementations." + MODULE -- this module + MANDATORY-GROUPS { + vrrpOperGroup, + vrrpStatsGroup + } + OBJECT vrrpOperPriority + WRITE-SYNTAX Integer32 (1..255) + DESCRIPTION "SETable values are from 1 to 255." + ::= { vrrpMIBCompliances 1 } + +-- ................................................................... +-- Conformance Groups +-- ................................................................... + + vrrpOperGroup OBJECT-GROUP + OBJECTS { + vrrpNodeVersion, + vrrpNotificationCntl, + vrrpOperVirtualMacAddr, + vrrpOperState, + vrrpOperAdminState, + vrrpOperPriority, + vrrpOperIpAddrCount, + vrrpOperMasterIpAddr, + vrrpOperPrimaryIpAddr, + vrrpOperAuthType, + vrrpOperAuthKey, + vrrpOperAdvertisementInterval, + vrrpOperPreemptMode, + vrrpOperVirtualRouterUpTime, + vrrpOperProtocol, + vrrpOperRowStatus, + vrrpAssoIpAddrRowStatus + } + STATUS current + DESCRIPTION + "Conformance group for VRRP operations." + ::= { vrrpMIBGroups 1 } + + vrrpStatsGroup OBJECT-GROUP + OBJECTS { + vrrpRouterChecksumErrors, + vrrpRouterVersionErrors, + vrrpRouterVrIdErrors, + vrrpStatsBecomeMaster, + vrrpStatsAdvertiseRcvd, + vrrpStatsAdvertiseIntervalErrors, + vrrpStatsAuthFailures, + vrrpStatsIpTtlErrors, + vrrpStatsPriorityZeroPktsRcvd, + vrrpStatsPriorityZeroPktsSent, + vrrpStatsInvalidTypePktsRcvd, + vrrpStatsAddressListErrors, + vrrpStatsInvalidAuthType, + vrrpStatsAuthTypeMismatch, + vrrpStatsPacketLengthErrors + } + STATUS current + DESCRIPTION + "Conformance group for VRRP statistics." + ::= { vrrpMIBGroups 2 } + + vrrpTrapGroup OBJECT-GROUP + OBJECTS { + vrrpTrapPacketSrc, + vrrpTrapAuthErrorType + } + STATUS current + DESCRIPTION + "Conformance group for objects contained in VRRP notifications." + ::= { vrrpMIBGroups 3 } + + vrrpNotificationGroup NOTIFICATION-GROUP + NOTIFICATIONS { + vrrpTrapNewMaster, + vrrpTrapAuthFailure + } + STATUS current + DESCRIPTION + "The VRRP MIB Notification Group." + ::= { vrrpMIBGroups 4 } + +END |