diff options
Diffstat (limited to 'MIBS/Q-BRIDGE-MIB')
| -rw-r--r-- | MIBS/Q-BRIDGE-MIB | 2489 |
1 files changed, 2489 insertions, 0 deletions
diff --git a/MIBS/Q-BRIDGE-MIB b/MIBS/Q-BRIDGE-MIB new file mode 100644 index 0000000..b9c82a7 --- /dev/null +++ b/MIBS/Q-BRIDGE-MIB @@ -0,0 +1,2489 @@ +Q-BRIDGE-MIB DEFINITIONS ::= BEGIN + +-- ------------------------------------------------------------- +-- MIB for IEEE 802.1Q Devices +-- ------------------------------------------------------------- + +IMPORTS + MODULE-IDENTITY, OBJECT-TYPE, + Counter32, Counter64, Unsigned32, TimeTicks, Integer32 + FROM SNMPv2-SMI + RowStatus, TruthValue, TEXTUAL-CONVENTION, MacAddress + FROM SNMPv2-TC + SnmpAdminString + FROM SNMP-FRAMEWORK-MIB + MODULE-COMPLIANCE, OBJECT-GROUP + FROM SNMPv2-CONF + dot1dBridge, dot1dBasePortEntry, dot1dBasePort + FROM BRIDGE-MIB + EnabledStatus + FROM P-BRIDGE-MIB + TimeFilter + FROM RMON2-MIB; + +qBridgeMIB MODULE-IDENTITY + LAST-UPDATED "200601090000Z" + ORGANIZATION "IETF Bridge MIB Working Group" + CONTACT-INFO + "Email: Bridge-mib@ietf.org + ietfmibs@ops.ietf.org + + David Levi + Postal: Nortel Networks + 4655 Great America Parkway + Santa Clara, CA 95054 + USA + Phone: +1 865 686 0432 + Email: dlevi@nortel.com + + David Harrington + Postal: Effective Software + 50 Harding Rd. + Portsmouth, NH 03801 + USA + Phone: +1 603 436 8634 + Email: ietfdbh@comcast.net + + + + Les Bell + Postal: Hemel Hempstead, Herts. HP2 7YU + UK + Email: elbell@ntlworld.com + + Andrew Smith + Postal: Beijing Harbour Networks + Jiuling Building + 21 North Xisanhuan Ave. + Beijing, 100089 + PRC + Fax: +1 415 345 1827 + Email: ah_smith@acm.org + + Paul Langille + Postal: Newbridge Networks + 5 Corporate Drive + Andover, MA 01810 + USA + Phone: +1 978 691 4665 + Email: langille@newbridge.com + + Anil Rijhsinghani + Postal: Accton Technology Corporation + 5 Mount Royal Ave + Marlboro, MA 01752 + USA + Phone: + Email: anil@accton.com + + Keith McCloghrie + Postal: Cisco Systems, Inc. + 170 West Tasman Drive + San Jose, CA 95134-1706 + USA + Phone: +1 408 526 5260 + Email: kzm@cisco.com" + DESCRIPTION + "The VLAN Bridge MIB module for managing Virtual Bridged + Local Area Networks, as defined by IEEE 802.1Q-2003, + including Restricted Vlan Registration defined by + IEEE 802.1u-2001 and Vlan Classification defined by + IEEE 802.1v-2001. + + Copyright (C) The Internet Society (2006). This version of + this MIB module is part of RFC 4363; See the RFC itself for + full legal notices." + REVISION "200601090000Z" + + + + DESCRIPTION + "Added Vlan TEXTUAL-CONVENTIONs, + dot1qPortRestrictedVlanRegistration, dot1vProtocol subtree, + qBridgeClassificationDeviceGroup, qBridgePortGroup2, + qBridgeClassificationPortGroup, and qBridgeCompliance2. + Clarified dot1qForwardAllStaticPorts, + qPortAcceptableFrameTypes, and qBridgeCompliance. + Deprecated qBridgePortGroup and qBridgeCompliance." + + REVISION "199908250000Z" + DESCRIPTION + "The VLAN Bridge MIB module for managing Virtual Bridged + Local Area Networks, as defined by IEEE 802.1Q-1998. + + Initial version, published as RFC 2674." + + ::= { dot1dBridge 7 } + +qBridgeMIBObjects OBJECT IDENTIFIER ::= { qBridgeMIB 1 } + +-- ------------------------------------------------------------- +-- Textual Conventions +-- ------------------------------------------------------------- + +PortList ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Each octet within this value specifies a set of eight + ports, with the first octet specifying ports 1 through + 8, the second octet specifying ports 9 through 16, etc. + Within each octet, the most significant bit represents + the lowest numbered port, and the least significant bit + represents the highest numbered port. Thus, each port + of the bridge is represented by a single bit within the + value of this object. If that bit has a value of '1', + then that port is included in the set of ports; the port + is not included if its bit has a value of '0'." + SYNTAX OCTET STRING + +VlanIndex ::= TEXTUAL-CONVENTION + DISPLAY-HINT "d" + STATUS current + DESCRIPTION + "A value used to index per-VLAN tables: values of 0 and + 4095 are not permitted. If the value is between 1 and + 4094 inclusive, it represents an IEEE 802.1Q VLAN-ID with + global scope within a given bridged domain (see VlanId + textual convention). If the value is greater than 4095, + + + + then it represents a VLAN with scope local to the + particular agent, i.e., one without a global VLAN-ID + assigned to it. Such VLANs are outside the scope of + IEEE 802.1Q, but it is convenient to be able to manage them + in the same way using this MIB." + SYNTAX Unsigned32 + +VlanId ::= TEXTUAL-CONVENTION + DISPLAY-HINT "d" + STATUS current + DESCRIPTION + "The VLAN-ID that uniquely identifies a VLAN. This + is the 12-bit VLAN-ID used in the VLAN Tag header. + The range is defined by the REFERENCEd specification." + REFERENCE + "IEEE Std 802.1Q 2003 Edition, Virtual Bridged + Local Area Networks." + SYNTAX Integer32 (1..4094) + +VlanIdOrAny ::= TEXTUAL-CONVENTION + DISPLAY-HINT "d" + STATUS current + DESCRIPTION + "The VLAN-ID that uniquely identifies a specific VLAN, + or any VLAN. The special value of 4095 is used to + indicate a wildcard, i.e., any VLAN. This can be used + in any situation where an object or table entry must + refer either to a specific VLAN or to any VLAN. + + Note that a MIB object that is defined using this + TEXTUAL-CONVENTION should clarify the meaning of + 'any VLAN' (i.e., the special value 4095)." + SYNTAX Integer32 (1..4094 | 4095) + +VlanIdOrNone ::= TEXTUAL-CONVENTION + DISPLAY-HINT "d" + STATUS current + DESCRIPTION + "The VLAN-ID that uniquely identifies a specific VLAN, + or no VLAN. The special value of zero is used to + indicate that no VLAN-ID is present or used. This can + be used in any situation where an object or a table entry + must refer either to a specific VLAN, or to no VLAN. + + Note that a MIB object that is defined using this + TEXTUAL-CONVENTION should clarify the meaning of + 'no VLAN' (i.e., the special value 0)." + SYNTAX Integer32 (0 | 1..4094) + + + +VlanIdOrAnyOrNone ::= TEXTUAL-CONVENTION + DISPLAY-HINT "d" + STATUS current + DESCRIPTION + "The VLAN-ID that uniquely identifies a specific VLAN, + any VLAN, or no VLAN. The special values 0 and 4095 + have the same meaning as described in the VlanIdOrAny + and VlanIdOrNone TEXTUAL-CONVENTIONs. + + Note that a MIB object that is defined using this + TEXTUAL-CONVENTION should clarify the meaning of + 'any VLAN' and 'no VLAN' (i.e., the special values + 0 and 4095)." + SYNTAX Integer32 (0 | 1..4094 | 4095) + +-- ------------------------------------------------------------- +-- subtrees in the Q-BRIDGE MIB +-- ------------------------------------------------------------- + +dot1qBase OBJECT IDENTIFIER ::= { qBridgeMIBObjects 1 } +dot1qTp OBJECT IDENTIFIER ::= { qBridgeMIBObjects 2 } +dot1qStatic OBJECT IDENTIFIER ::= { qBridgeMIBObjects 3 } +dot1qVlan OBJECT IDENTIFIER ::= { qBridgeMIBObjects 4 } +dot1vProtocol OBJECT IDENTIFIER ::= { qBridgeMIBObjects 5 } + +-- ------------------------------------------------------------- +-- dot1qBase subtree +-- ------------------------------------------------------------- + +dot1qVlanVersionNumber OBJECT-TYPE + SYNTAX INTEGER { + version1(1) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The version number of IEEE 802.1Q that this device + supports." + REFERENCE + "IEEE 802.1Q/D11 Section 12.10.1.1" + ::= { dot1qBase 1 } + +dot1qMaxVlanId OBJECT-TYPE + SYNTAX VlanId + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The maximum IEEE 802.1Q VLAN-ID that this device + + + + supports." + REFERENCE + "IEEE 802.1Q/D11 Section 9.3.2.3" + ::= { dot1qBase 2 } + +dot1qMaxSupportedVlans OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The maximum number of IEEE 802.1Q VLANs that this + device supports." + REFERENCE + "IEEE 802.1Q/D11 Section 12.10.1.1" + ::= { dot1qBase 3 } + +dot1qNumVlans OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The current number of IEEE 802.1Q VLANs that are + configured in this device." + REFERENCE + "IEEE 802.1Q/D11 Section 12.7.1.1" + ::= { dot1qBase 4 } + +dot1qGvrpStatus OBJECT-TYPE + SYNTAX EnabledStatus + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The administrative status requested by management for + GVRP. The value enabled(1) indicates that GVRP should + be enabled on this device, on all ports for which it has + not been specifically disabled. When disabled(2), GVRP + is disabled on all ports, and all GVRP packets will be + forwarded transparently. This object affects all GVRP + Applicant and Registrar state machines. A transition + from disabled(2) to enabled(1) will cause a reset of all + GVRP state machines on all ports. + + The value of this object MUST be retained across + reinitializations of the management system." + DEFVAL { enabled } + ::= { dot1qBase 5 } + +-- ------------------------------------------------------------- + + + +-- the dot1qTp subtree +-- ------------------------------------------------------------- + +-- ------------------------------------------------------------- +-- the current Filtering Database Table +-- ------------------------------------------------------------- + +dot1qFdbTable OBJECT-TYPE + SYNTAX SEQUENCE OF Dot1qFdbEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table that contains configuration and control + information for each Filtering Database currently + operating on this device. Entries in this table appear + automatically when VLANs are assigned FDB IDs in the + dot1qVlanCurrentTable." + ::= { dot1qTp 1 } + +dot1qFdbEntry OBJECT-TYPE + SYNTAX Dot1qFdbEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Information about a specific Filtering Database." + INDEX { dot1qFdbId } + ::= { dot1qFdbTable 1 } + +Dot1qFdbEntry ::= + SEQUENCE { + dot1qFdbId + Unsigned32, + dot1qFdbDynamicCount + Counter32 + } + +dot1qFdbId OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The identity of this Filtering Database." + ::= { dot1qFdbEntry 1 } + +dot1qFdbDynamicCount OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + + + + DESCRIPTION + "The current number of dynamic entries in this + Filtering Database." + REFERENCE + "IEEE 802.1Q/D11 Section 12.7.1.1.3" + ::= { dot1qFdbEntry 2 } + +-- ------------------------------------------------------------- +-- Multiple Forwarding Databases for 802.1Q Transparent Devices +-- This table is an alternative to the dot1dTpFdbTable, +-- previously defined for 802.1D devices that only support a +-- single Forwarding Database. +-- ------------------------------------------------------------- + +dot1qTpFdbTable OBJECT-TYPE + SYNTAX SEQUENCE OF Dot1qTpFdbEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table that contains information about unicast entries + for which the device has forwarding and/or filtering + information. This information is used by the + transparent bridging function in determining how to + propagate a received frame." + REFERENCE + "IEEE 802.1Q/D11 Section 12.7.7" + ::= { dot1qTp 2 } + +dot1qTpFdbEntry OBJECT-TYPE + SYNTAX Dot1qTpFdbEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Information about a specific unicast MAC address for + which the device has some forwarding and/or filtering + information." + INDEX { dot1qFdbId, dot1qTpFdbAddress } + ::= { dot1qTpFdbTable 1 } + +Dot1qTpFdbEntry ::= + SEQUENCE { + dot1qTpFdbAddress + MacAddress, + dot1qTpFdbPort + Integer32, + dot1qTpFdbStatus + INTEGER + } + + + +dot1qTpFdbAddress OBJECT-TYPE + SYNTAX MacAddress + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A unicast MAC address for which the device has + forwarding and/or filtering information." + ::= { dot1qTpFdbEntry 1 } + +dot1qTpFdbPort OBJECT-TYPE + SYNTAX Integer32 (0..65535) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Either the value '0', or the port number of the port on + which a frame having a source address equal to the value + of the corresponding instance of dot1qTpFdbAddress has + been seen. A value of '0' indicates that the port + number has not been learned but that the device does + have some forwarding/filtering information about this + address (e.g., in the dot1qStaticUnicastTable). + Implementors are encouraged to assign the port value to + this object whenever it is learned, even for addresses + for which the corresponding value of dot1qTpFdbStatus is + not learned(3)." + ::= { dot1qTpFdbEntry 2 } + +dot1qTpFdbStatus OBJECT-TYPE + SYNTAX INTEGER { + other(1), + invalid(2), + learned(3), + self(4), + mgmt(5) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The status of this entry. The meanings of the values + are: + other(1) - none of the following. This may include + the case where some other MIB object (not the + corresponding instance of dot1qTpFdbPort, nor an + entry in the dot1qStaticUnicastTable) is being + used to determine if and how frames addressed to + the value of the corresponding instance of + dot1qTpFdbAddress are being forwarded. + invalid(2) - this entry is no longer valid (e.g., it + + + + was learned but has since aged out), but has not + yet been flushed from the table. + learned(3) - the value of the corresponding instance + of dot1qTpFdbPort was learned and is being used. + self(4) - the value of the corresponding instance of + dot1qTpFdbAddress represents one of the device's + addresses. The corresponding instance of + dot1qTpFdbPort indicates which of the device's + ports has this address. + mgmt(5) - the value of the corresponding instance of + dot1qTpFdbAddress is also the value of an + existing instance of dot1qStaticAddress." + ::= { dot1qTpFdbEntry 3 } + +-- ------------------------------------------------------------- +-- Dynamic Group Registration Table +-- ------------------------------------------------------------- + +dot1qTpGroupTable OBJECT-TYPE + SYNTAX SEQUENCE OF Dot1qTpGroupEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table containing filtering information for VLANs + configured into the bridge by (local or network) + management, or learned dynamically, specifying the set of + ports to which frames received on a VLAN for this FDB + and containing a specific Group destination address are + allowed to be forwarded." + ::= { dot1qTp 3 } + +dot1qTpGroupEntry OBJECT-TYPE + SYNTAX Dot1qTpGroupEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Filtering information configured into the bridge by + management, or learned dynamically, specifying the set of + ports to which frames received on a VLAN and containing + a specific Group destination address are allowed to be + forwarded. The subset of these ports learned dynamically + is also provided." + INDEX { dot1qVlanIndex, dot1qTpGroupAddress } + ::= { dot1qTpGroupTable 1 } + +Dot1qTpGroupEntry ::= + SEQUENCE { + dot1qTpGroupAddress + + + + MacAddress, + dot1qTpGroupEgressPorts + PortList, + dot1qTpGroupLearnt + PortList + } + +dot1qTpGroupAddress OBJECT-TYPE + SYNTAX MacAddress + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The destination Group MAC address in a frame to which + this entry's filtering information applies." + ::= { dot1qTpGroupEntry 1 } + +dot1qTpGroupEgressPorts OBJECT-TYPE + SYNTAX PortList + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The complete set of ports, in this VLAN, to which + frames destined for this Group MAC address are currently + being explicitly forwarded. This does not include ports + for which this address is only implicitly forwarded, in + the dot1qForwardAllPorts list." + ::= { dot1qTpGroupEntry 2 } + +dot1qTpGroupLearnt OBJECT-TYPE + SYNTAX PortList + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The subset of ports in dot1qTpGroupEgressPorts that + were learned by GMRP or some other dynamic mechanism, in + this Filtering database." + ::= { dot1qTpGroupEntry 3 } + +-- ------------------------------------------------------------- +-- Service Requirements subtree +-- ------------------------------------------------------------- + +dot1qForwardAllTable OBJECT-TYPE + SYNTAX SEQUENCE OF Dot1qForwardAllEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table containing forwarding information for each + + + + VLAN, specifying the set of ports to which forwarding of + all multicasts applies, configured statically by + management or dynamically by GMRP. An entry appears in + this table for all VLANs that are currently + instantiated." + REFERENCE + "IEEE 802.1Q/D11 Section 12.7.2, 12.7.7" + ::= { dot1qTp 4 } + +dot1qForwardAllEntry OBJECT-TYPE + SYNTAX Dot1qForwardAllEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Forwarding information for a VLAN, specifying the set + of ports to which all multicasts should be forwarded, + configured statically by management or dynamically by + GMRP." + INDEX { dot1qVlanIndex } + ::= { dot1qForwardAllTable 1 } + +Dot1qForwardAllEntry ::= + SEQUENCE { + dot1qForwardAllPorts + PortList, + dot1qForwardAllStaticPorts + PortList, + dot1qForwardAllForbiddenPorts + PortList + } + +dot1qForwardAllPorts OBJECT-TYPE + SYNTAX PortList + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The complete set of ports in this VLAN to which all + multicast group-addressed frames are to be forwarded. + This includes ports for which this need has been + determined dynamically by GMRP, or configured statically + by management." + ::= { dot1qForwardAllEntry 1 } + +dot1qForwardAllStaticPorts OBJECT-TYPE + SYNTAX PortList + MAX-ACCESS read-write + STATUS current + DESCRIPTION + + + + "The set of ports configured by management in this VLAN + to which all multicast group-addressed frames are to be + forwarded. Ports entered in this list will also appear + in the complete set shown by dot1qForwardAllPorts. This + value will be restored after the device is reset. This + only applies to ports that are members of the VLAN, + defined by dot1qVlanCurrentEgressPorts. A port may not + be added in this set if it is already a member of the + set of ports in dot1qForwardAllForbiddenPorts. The + default value is a string of ones of appropriate length, + to indicate the standard behaviour of using basic + filtering services, i.e., forward all multicasts to all + ports. + + The value of this object MUST be retained across + reinitializations of the management system." + ::= { dot1qForwardAllEntry 2 } + +dot1qForwardAllForbiddenPorts OBJECT-TYPE + SYNTAX PortList + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The set of ports configured by management in this VLAN + for which the Service Requirement attribute Forward All + Multicast Groups may not be dynamically registered by + GMRP. This value will be restored after the device is + reset. A port may not be added in this set if it is + already a member of the set of ports in + dot1qForwardAllStaticPorts. The default value is a + string of zeros of appropriate length. + + The value of this object MUST be retained across + reinitializations of the management system." + ::= { dot1qForwardAllEntry 3 } + +dot1qForwardUnregisteredTable OBJECT-TYPE + SYNTAX SEQUENCE OF Dot1qForwardUnregisteredEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table containing forwarding information for each + VLAN, specifying the set of ports to which forwarding of + multicast group-addressed frames for which no + more specific forwarding information applies. This is + configured statically by management and determined + dynamically by GMRP. An entry appears in this table for + all VLANs that are currently instantiated." + + + + REFERENCE + "IEEE 802.1Q/D11 Section 12.7.2, 12.7.7" + ::= { dot1qTp 5 } + +dot1qForwardUnregisteredEntry OBJECT-TYPE + SYNTAX Dot1qForwardUnregisteredEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Forwarding information for a VLAN, specifying the set + of ports to which all multicasts for which there is no + more specific forwarding information shall be forwarded. + This is configured statically by management or + dynamically by GMRP." + INDEX { dot1qVlanIndex } + ::= { dot1qForwardUnregisteredTable 1 } + +Dot1qForwardUnregisteredEntry ::= + SEQUENCE { + dot1qForwardUnregisteredPorts + PortList, + dot1qForwardUnregisteredStaticPorts + PortList, + dot1qForwardUnregisteredForbiddenPorts + PortList + } + +dot1qForwardUnregisteredPorts OBJECT-TYPE + SYNTAX PortList + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The complete set of ports in this VLAN to which + multicast group-addressed frames for which there is no + more specific forwarding information will be forwarded. + This includes ports for which this need has been + determined dynamically by GMRP, or configured statically + by management." + ::= { dot1qForwardUnregisteredEntry 1 } + +dot1qForwardUnregisteredStaticPorts OBJECT-TYPE + SYNTAX PortList + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The set of ports configured by management, in this + VLAN, to which multicast group-addressed frames for + which there is no more specific forwarding information + + + + are to be forwarded. Ports entered in this list will + also appear in the complete set shown by + dot1qForwardUnregisteredPorts. This value will be + restored after the device is reset. A port may not be + added in this set if it is already a member of the set + of ports in dot1qForwardUnregisteredForbiddenPorts. The + default value is a string of zeros of appropriate + length, although this has no effect with the default + value of dot1qForwardAllStaticPorts. + + The value of this object MUST be retained across + reinitializations of the management system." + ::= { dot1qForwardUnregisteredEntry 2 } + +dot1qForwardUnregisteredForbiddenPorts OBJECT-TYPE + SYNTAX PortList + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The set of ports configured by management in this VLAN + for which the Service Requirement attribute Forward + Unregistered Multicast Groups may not be dynamically + registered by GMRP. This value will be restored after + the device is reset. A port may not be added in this + set if it is already a member of the set of ports in + dot1qForwardUnregisteredStaticPorts. The default value + is a string of zeros of appropriate length. + + The value of this object MUST be retained across + reinitializations of the management system." + ::= { dot1qForwardUnregisteredEntry 3 } + +-- ------------------------------------------------------------- +-- The Static (Destination-Address Filtering) Database +-- ------------------------------------------------------------- + +dot1qStaticUnicastTable OBJECT-TYPE + SYNTAX SEQUENCE OF Dot1qStaticUnicastEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table containing filtering information for Unicast + MAC addresses for each Filtering Database, configured + into the device by (local or network) management + specifying the set of ports to which frames received + from specific ports and containing specific unicast + destination addresses are allowed to be forwarded. A + value of zero in this table (as the port number from + + + + which frames with a specific destination address are + received) is used to specify all ports for which there + is no specific entry in this table for that particular + destination address. Entries are valid for unicast + addresses only." + REFERENCE + "IEEE 802.1Q/D11 Section 12.7.7, + ISO/IEC 15802-3 Section 7.9.1" + ::= { dot1qStatic 1 } + +dot1qStaticUnicastEntry OBJECT-TYPE + SYNTAX Dot1qStaticUnicastEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Filtering information configured into the device by + (local or network) management specifying the set of + ports to which frames received from a specific port and + containing a specific unicast destination address are + allowed to be forwarded." + INDEX { + dot1qFdbId, + dot1qStaticUnicastAddress, + dot1qStaticUnicastReceivePort + } + ::= { dot1qStaticUnicastTable 1 } + +Dot1qStaticUnicastEntry ::= + SEQUENCE { + dot1qStaticUnicastAddress + MacAddress, + dot1qStaticUnicastReceivePort + Integer32, + dot1qStaticUnicastAllowedToGoTo + PortList, + dot1qStaticUnicastStatus + INTEGER + } + +dot1qStaticUnicastAddress OBJECT-TYPE + SYNTAX MacAddress + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The destination MAC address in a frame to which this + entry's filtering information applies. This object must + take the value of a unicast address." + ::= { dot1qStaticUnicastEntry 1 } + + + +dot1qStaticUnicastReceivePort OBJECT-TYPE + SYNTAX Integer32 (0..65535) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Either the value '0' or the port number of the port + from which a frame must be received in order for this + entry's filtering information to apply. A value of zero + indicates that this entry applies on all ports of the + device for which there is no other applicable entry." + ::= { dot1qStaticUnicastEntry 2 } + +dot1qStaticUnicastAllowedToGoTo OBJECT-TYPE + SYNTAX PortList + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The set of ports for which a frame with a specific + unicast address will be flooded in the event that it + has not been learned. It also specifies the set of + ports on which a specific unicast address may be dynamically + learned. The dot1qTpFdbTable will have an equivalent + entry with a dot1qTpFdbPort value of '0' until this + address has been learned, at which point it will be updated + with the port the address has been seen on. This only + applies to ports that are members of the VLAN, defined + by dot1qVlanCurrentEgressPorts. The default value of + this object is a string of ones of appropriate length. + + The value of this object MUST be retained across + reinitializations of the management system." + REFERENCE + "IEEE 802.1Q/D11 Table 8-5, ISO/IEC 15802-3 Table 7-5" + ::= { dot1qStaticUnicastEntry 3 } + +dot1qStaticUnicastStatus OBJECT-TYPE + SYNTAX INTEGER { + other(1), + invalid(2), + permanent(3), + deleteOnReset(4), + deleteOnTimeout(5) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object indicates the status of this entry. + other(1) - this entry is currently in use, but + + + + the conditions under which it will remain + so differ from the following values. + invalid(2) - writing this value to the object + removes the corresponding entry. + permanent(3) - this entry is currently in use + and will remain so after the next reset of + the bridge. + deleteOnReset(4) - this entry is currently in + use and will remain so until the next + reset of the bridge. + deleteOnTimeout(5) - this entry is currently in + use and will remain so until it is aged out. + + The value of this object MUST be retained across + reinitializations of the management system." + DEFVAL { permanent } + ::= { dot1qStaticUnicastEntry 4 } + +dot1qStaticMulticastTable OBJECT-TYPE + SYNTAX SEQUENCE OF Dot1qStaticMulticastEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table containing filtering information for Multicast + and Broadcast MAC addresses for each VLAN, configured + into the device by (local or network) management + specifying the set of ports to which frames received + from specific ports and containing specific Multicast + and Broadcast destination addresses are allowed to be + forwarded. A value of zero in this table (as the port + number from which frames with a specific destination + address are received) is used to specify all ports for + which there is no specific entry in this table for that + particular destination address. Entries are valid for + Multicast and Broadcast addresses only." + REFERENCE + "IEEE 802.1Q/D11 Section 12.7.7, + ISO/IEC 15802-3 Section 7.9.1" + ::= { dot1qStatic 2 } + +dot1qStaticMulticastEntry OBJECT-TYPE + SYNTAX Dot1qStaticMulticastEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Filtering information configured into the device by + (local or network) management specifying the set of + ports to which frames received from this specific port + + + + for this VLAN and containing this Multicast or Broadcast + destination address are allowed to be forwarded." + INDEX { + dot1qVlanIndex, + dot1qStaticMulticastAddress, + dot1qStaticMulticastReceivePort + } + ::= { dot1qStaticMulticastTable 1 } + +Dot1qStaticMulticastEntry ::= + SEQUENCE { + dot1qStaticMulticastAddress + MacAddress, + dot1qStaticMulticastReceivePort + Integer32, + dot1qStaticMulticastStaticEgressPorts + PortList, + dot1qStaticMulticastForbiddenEgressPorts + PortList, + dot1qStaticMulticastStatus + INTEGER + } + +dot1qStaticMulticastAddress OBJECT-TYPE + SYNTAX MacAddress + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The destination MAC address in a frame to which this + entry's filtering information applies. This object must + take the value of a Multicast or Broadcast address." + ::= { dot1qStaticMulticastEntry 1 } + +dot1qStaticMulticastReceivePort OBJECT-TYPE + SYNTAX Integer32 (0..65535) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Either the value '0' or the port number of the port + from which a frame must be received in order for this + entry's filtering information to apply. A value of zero + indicates that this entry applies on all ports of the + device for which there is no other applicable entry." + ::= { dot1qStaticMulticastEntry 2 } + +dot1qStaticMulticastStaticEgressPorts OBJECT-TYPE + SYNTAX PortList + MAX-ACCESS read-write + + + + STATUS current + DESCRIPTION + "The set of ports to which frames received from a + specific port and destined for a specific Multicast or + Broadcast MAC address must be forwarded, regardless of + any dynamic information, e.g., from GMRP. A port may not + be added in this set if it is already a member of the + set of ports in dot1qStaticMulticastForbiddenEgressPorts. + The default value of this object is a string of ones of + appropriate length. + + The value of this object MUST be retained across + reinitializations of the management system." + ::= { dot1qStaticMulticastEntry 3 } + +dot1qStaticMulticastForbiddenEgressPorts OBJECT-TYPE + SYNTAX PortList + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The set of ports to which frames received from a + specific port and destined for a specific Multicast or + Broadcast MAC address must not be forwarded, regardless + of any dynamic information, e.g., from GMRP. A port may + not be added in this set if it is already a member of the + set of ports in dot1qStaticMulticastStaticEgressPorts. + The default value of this object is a string of zeros of + appropriate length. + + The value of this object MUST be retained across + reinitializations of the management system." + ::= { dot1qStaticMulticastEntry 4 } + +dot1qStaticMulticastStatus OBJECT-TYPE + SYNTAX INTEGER { + other(1), + invalid(2), + permanent(3), + deleteOnReset(4), + deleteOnTimeout(5) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object indicates the status of this entry. + other(1) - this entry is currently in use, but + the conditions under which it will remain + so differ from the following values. + + + + invalid(2) - writing this value to the object + removes the corresponding entry. + permanent(3) - this entry is currently in use + and will remain so after the next reset of + the bridge. + deleteOnReset(4) - this entry is currently in + use and will remain so until the next + reset of the bridge. + deleteOnTimeout(5) - this entry is currently in + use and will remain so until it is aged out. + + The value of this object MUST be retained across + reinitializations of the management system." + DEFVAL { permanent } + ::= { dot1qStaticMulticastEntry 5 } + +-- ------------------------------------------------------------- +-- The Current VLAN Database +-- ------------------------------------------------------------- + +dot1qVlanNumDeletes OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of times a VLAN entry has been deleted from + the dot1qVlanCurrentTable (for any reason). If an entry + is deleted, then inserted, and then deleted, this + counter will be incremented by 2." + ::= { dot1qVlan 1 } + +dot1qVlanCurrentTable OBJECT-TYPE + SYNTAX SEQUENCE OF Dot1qVlanCurrentEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table containing current configuration information + for each VLAN currently configured into the device by + (local or network) management, or dynamically created + as a result of GVRP requests received." + ::= { dot1qVlan 2 } + +dot1qVlanCurrentEntry OBJECT-TYPE + SYNTAX Dot1qVlanCurrentEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Information for a VLAN configured into the device by + + + + (local or network) management, or dynamically created + as a result of GVRP requests received." + INDEX { dot1qVlanTimeMark, dot1qVlanIndex } + ::= { dot1qVlanCurrentTable 1 } + +Dot1qVlanCurrentEntry ::= + SEQUENCE { + dot1qVlanTimeMark + TimeFilter, + dot1qVlanIndex + VlanIndex, + dot1qVlanFdbId + Unsigned32, + dot1qVlanCurrentEgressPorts + PortList, + dot1qVlanCurrentUntaggedPorts + PortList, + dot1qVlanStatus + INTEGER, + dot1qVlanCreationTime + TimeTicks + } + +dot1qVlanTimeMark OBJECT-TYPE + SYNTAX TimeFilter + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A TimeFilter for this entry. See the TimeFilter + textual convention to see how this works." + ::= { dot1qVlanCurrentEntry 1 } + +dot1qVlanIndex OBJECT-TYPE + SYNTAX VlanIndex + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The VLAN-ID or other identifier referring to this VLAN." + ::= { dot1qVlanCurrentEntry 2 } + +dot1qVlanFdbId OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The Filtering Database used by this VLAN. This is one + of the dot1qFdbId values in the dot1qFdbTable. This + value is allocated automatically by the device whenever + + + + the VLAN is created: either dynamically by GVRP, or by + management, in dot1qVlanStaticTable. Allocation of this + value follows the learning constraints defined for this + VLAN in dot1qLearningConstraintsTable." + ::= { dot1qVlanCurrentEntry 3 } + +dot1qVlanCurrentEgressPorts OBJECT-TYPE + SYNTAX PortList + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The set of ports that are transmitting traffic for + this VLAN as either tagged or untagged frames." + REFERENCE + "IEEE 802.1Q/D11 Section 12.10.2.1" + ::= { dot1qVlanCurrentEntry 4 } + +dot1qVlanCurrentUntaggedPorts OBJECT-TYPE + SYNTAX PortList + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The set of ports that are transmitting traffic for + this VLAN as untagged frames." + REFERENCE + "IEEE 802.1Q/D11 Section 12.10.2.1" + ::= { dot1qVlanCurrentEntry 5 } + +dot1qVlanStatus OBJECT-TYPE + SYNTAX INTEGER { + other(1), + permanent(2), + dynamicGvrp(3) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object indicates the status of this entry. + other(1) - this entry is currently in use, but the + conditions under which it will remain so differ + from the following values. + permanent(2) - this entry, corresponding to an entry + in dot1qVlanStaticTable, is currently in use and + will remain so after the next reset of the + device. The port lists for this entry include + ports from the equivalent dot1qVlanStaticTable + entry and ports learned dynamically. + dynamicGvrp(3) - this entry is currently in use + + + + and will remain so until removed by GVRP. There + is no static entry for this VLAN, and it will be + removed when the last port leaves the VLAN." + ::= { dot1qVlanCurrentEntry 6 } + +dot1qVlanCreationTime OBJECT-TYPE + SYNTAX TimeTicks + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of sysUpTime when this VLAN was created." + ::= { dot1qVlanCurrentEntry 7 } + +-- ------------------------------------------------------------- +-- The Static VLAN Database +-- ------------------------------------------------------------- + +dot1qVlanStaticTable OBJECT-TYPE + SYNTAX SEQUENCE OF Dot1qVlanStaticEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table containing static configuration information for + each VLAN configured into the device by (local or + network) management. All entries are permanent and will + be restored after the device is reset." + ::= { dot1qVlan 3 } + +dot1qVlanStaticEntry OBJECT-TYPE + SYNTAX Dot1qVlanStaticEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Static information for a VLAN configured into the + device by (local or network) management." + INDEX { dot1qVlanIndex } + ::= { dot1qVlanStaticTable 1 } + +Dot1qVlanStaticEntry ::= + SEQUENCE { + dot1qVlanStaticName + SnmpAdminString, + dot1qVlanStaticEgressPorts + PortList, + dot1qVlanForbiddenEgressPorts + PortList, + dot1qVlanStaticUntaggedPorts + PortList, + + + + dot1qVlanStaticRowStatus + RowStatus + } + +dot1qVlanStaticName OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..32)) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "An administratively assigned string, which may be used + to identify the VLAN." + REFERENCE + "IEEE 802.1Q/D11 Section 12.10.2.1" + ::= { dot1qVlanStaticEntry 1 } + +dot1qVlanStaticEgressPorts OBJECT-TYPE + SYNTAX PortList + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The set of ports that are permanently assigned to the + egress list for this VLAN by management. Changes to a + bit in this object affect the per-port, per-VLAN + Registrar control for Registration Fixed for the + relevant GVRP state machine on each port. A port may + not be added in this set if it is already a member of + the set of ports in dot1qVlanForbiddenEgressPorts. The + default value of this object is a string of zeros of + appropriate length, indicating not fixed." + REFERENCE + "IEEE 802.1Q/D11 Section 12.7.7.3, 11.2.3.2.3" + ::= { dot1qVlanStaticEntry 2 } + +dot1qVlanForbiddenEgressPorts OBJECT-TYPE + SYNTAX PortList + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The set of ports that are prohibited by management + from being included in the egress list for this VLAN. + Changes to this object that cause a port to be included + or excluded affect the per-port, per-VLAN Registrar + control for Registration Forbidden for the relevant GVRP + state machine on each port. A port may not be added in + this set if it is already a member of the set of ports + in dot1qVlanStaticEgressPorts. The default value of + this object is a string of zeros of appropriate length, + excluding all ports from the forbidden set." + + + + REFERENCE + "IEEE 802.1Q/D11 Section 12.7.7.3, 11.2.3.2.3" + ::= { dot1qVlanStaticEntry 3 } + +dot1qVlanStaticUntaggedPorts OBJECT-TYPE + SYNTAX PortList + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The set of ports that should transmit egress packets + for this VLAN as untagged. The default value of this + object for the default VLAN (dot1qVlanIndex = 1) is a string + of appropriate length including all ports. There is no + specified default for other VLANs. If a device agent cannot + support the set of ports being set, then it will reject the + set operation with an error. For example, a + manager might attempt to set more than one VLAN to be untagged + on egress where the device does not support this IEEE 802.1Q + option." + REFERENCE + "IEEE 802.1Q/D11 Section 12.10.2.1" + ::= { dot1qVlanStaticEntry 4 } + +dot1qVlanStaticRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object indicates the status of this entry." + ::= { dot1qVlanStaticEntry 5 } + +dot1qNextFreeLocalVlanIndex OBJECT-TYPE + SYNTAX Integer32 (0|4096..2147483647) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The next available value for dot1qVlanIndex of a local + VLAN entry in dot1qVlanStaticTable. This will report + values >=4096 if a new Local VLAN may be created or else + the value 0 if this is not possible. + + A row creation operation in this table for an entry with a local + VlanIndex value may fail if the current value of this object + is not used as the index. Even if the value read is used, + there is no guarantee that it will still be the valid index + when the create operation is attempted; another manager may + have already got in during the intervening time interval. + In this case, dot1qNextFreeLocalVlanIndex should be re-read + + + + and the creation re-tried with the new value. + + This value will automatically change when the current value is + used to create a new row." + ::= { dot1qVlan 4 } + +-- ------------------------------------------------------------- +-- The VLAN Port Configuration Table +-- ------------------------------------------------------------- + +dot1qPortVlanTable OBJECT-TYPE + SYNTAX SEQUENCE OF Dot1qPortVlanEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table containing per-port control and status + information for VLAN configuration in the device." + ::= { dot1qVlan 5 } + +dot1qPortVlanEntry OBJECT-TYPE + SYNTAX Dot1qPortVlanEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Information controlling VLAN configuration for a port + on the device. This is indexed by dot1dBasePort." + AUGMENTS { dot1dBasePortEntry } + ::= { dot1qPortVlanTable 1 } + +Dot1qPortVlanEntry ::= + SEQUENCE { + dot1qPvid + VlanIndex, + dot1qPortAcceptableFrameTypes + INTEGER, + dot1qPortIngressFiltering + TruthValue, + dot1qPortGvrpStatus + EnabledStatus, + dot1qPortGvrpFailedRegistrations + Counter32, + dot1qPortGvrpLastPduOrigin + MacAddress, + dot1qPortRestrictedVlanRegistration + TruthValue + } + +dot1qPvid OBJECT-TYPE + + + + SYNTAX VlanIndex + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The PVID, the VLAN-ID assigned to untagged frames or + Priority-Tagged frames received on this port. + + The value of this object MUST be retained across + reinitializations of the management system." + REFERENCE + "IEEE 802.1Q/D11 Section 12.10.1.1" + DEFVAL { 1 } + ::= { dot1qPortVlanEntry 1 } + +dot1qPortAcceptableFrameTypes OBJECT-TYPE + SYNTAX INTEGER { + admitAll(1), + admitOnlyVlanTagged(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "When this is admitOnlyVlanTagged(2), the device will + discard untagged frames or Priority-Tagged frames + received on this port. When admitAll(1), untagged + frames or Priority-Tagged frames received on this port + will be accepted and assigned to a VID based on the + PVID and VID Set for this port. + + This control does not affect VLAN-independent Bridge + Protocol Data Unit (BPDU) frames, such as GVRP and + Spanning Tree Protocol (STP). It does affect VLAN- + dependent BPDU frames, such as GMRP. + + The value of this object MUST be retained across + reinitializations of the management system." + REFERENCE + "IEEE 802.1Q/D11 Section 12.10.1.3" + DEFVAL { admitAll } + ::= { dot1qPortVlanEntry 2 } + +dot1qPortIngressFiltering OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "When this is true(1), the device will discard incoming + frames for VLANs that do not include this Port in its + + + + Member set. When false(2), the port will accept all + incoming frames. + + This control does not affect VLAN-independent BPDU + frames, such as GVRP and STP. It does affect VLAN- + dependent BPDU frames, such as GMRP. + + The value of this object MUST be retained across + reinitializations of the management system." + REFERENCE + "IEEE 802.1Q/D11 Section 12.10.1.4" + DEFVAL { false } + ::= { dot1qPortVlanEntry 3 } + +dot1qPortGvrpStatus OBJECT-TYPE + SYNTAX EnabledStatus + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The state of GVRP operation on this port. The value + enabled(1) indicates that GVRP is enabled on this port, + as long as dot1qGvrpStatus is also enabled for this + device. When disabled(2) but dot1qGvrpStatus is still + enabled for the device, GVRP is disabled on this port: + any GVRP packets received will be silently discarded, and + no GVRP registrations will be propagated from other + ports. This object affects all GVRP Applicant and + Registrar state machines on this port. A transition + from disabled(2) to enabled(1) will cause a reset of all + GVRP state machines on this port. + + The value of this object MUST be retained across + reinitializations of the management system." + DEFVAL { enabled } + ::= { dot1qPortVlanEntry 4 } + +dot1qPortGvrpFailedRegistrations OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of failed GVRP registrations, for any + reason, on this port." + ::= { dot1qPortVlanEntry 5 } + +dot1qPortGvrpLastPduOrigin OBJECT-TYPE + SYNTAX MacAddress + MAX-ACCESS read-only + + + + STATUS current + DESCRIPTION + "The Source MAC Address of the last GVRP message + received on this port." + ::= { dot1qPortVlanEntry 6 } + +dot1qPortRestrictedVlanRegistration OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The state of Restricted VLAN Registration on this port. + If the value of this control is true(1), then creation + of a new dynamic VLAN entry is permitted only if there + is a Static VLAN Registration Entry for the VLAN concerned, + in which the Registrar Administrative Control value for + this port is Normal Registration. + + The value of this object MUST be retained across + reinitializations of the management system." + REFERENCE + "IEEE 802.1u clause 11.2.3.2.3, 12.10.1.7." + DEFVAL { false } + ::= { dot1qPortVlanEntry 7 } + +-- ------------------------------------------------------------- +-- Per port VLAN Statistics Table +-- ------------------------------------------------------------- + +dot1qPortVlanStatisticsTable OBJECT-TYPE + SYNTAX SEQUENCE OF Dot1qPortVlanStatisticsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table containing per-port, per-VLAN statistics for + traffic received. Separate objects are provided for both the + most-significant and least-significant bits of statistics + counters for ports that are associated with this transparent + bridge. The most-significant bit objects are only required on + high-capacity interfaces, as defined in the conformance clauses + for these objects. This mechanism is provided as a way to read + 64-bit counters for agents that support only SNMPv1. + + Note that the reporting of most-significant and least- + significant counter bits separately runs the risk of missing + an overflow of the lower bits in the interval between sampling. + The manager must be aware of this possibility, even within the + same varbindlist, when interpreting the results of a request or + + + + asynchronous notification." + ::= { dot1qVlan 6 } + +dot1qPortVlanStatisticsEntry OBJECT-TYPE + SYNTAX Dot1qPortVlanStatisticsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Traffic statistics for a VLAN on an interface." + INDEX { dot1dBasePort, dot1qVlanIndex } + ::= { dot1qPortVlanStatisticsTable 1 } + +Dot1qPortVlanStatisticsEntry ::= + SEQUENCE { + dot1qTpVlanPortInFrames + Counter32, + dot1qTpVlanPortOutFrames + Counter32, + dot1qTpVlanPortInDiscards + Counter32, + dot1qTpVlanPortInOverflowFrames + Counter32, + dot1qTpVlanPortOutOverflowFrames + Counter32, + dot1qTpVlanPortInOverflowDiscards + Counter32 + } + +dot1qTpVlanPortInFrames OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of valid frames received by this port from + its segment that were classified as belonging to this + VLAN. Note that a frame received on this port is + counted by this object if and only if it is for a + protocol being processed by the local forwarding process + for this VLAN. This object includes received bridge + management frames classified as belonging to this VLAN + (e.g., GMRP, but not GVRP or STP." + REFERENCE + "IEEE 802.1Q/D11 Section 12.6.1.1.3(a)" + ::= { dot1qPortVlanStatisticsEntry 1 } + +dot1qTpVlanPortOutFrames OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + + + + STATUS current + DESCRIPTION + "The number of valid frames transmitted by this port to + its segment from the local forwarding process for this + VLAN. This includes bridge management frames originated + by this device that are classified as belonging to this + VLAN (e.g., GMRP, but not GVRP or STP)." + REFERENCE + "IEEE 802.1Q/D11 Section 12.6.1.1.3(d)" + ::= { dot1qPortVlanStatisticsEntry 2 } + +dot1qTpVlanPortInDiscards OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of valid frames received by this port from + its segment that were classified as belonging to this + VLAN and that were discarded due to VLAN-related reasons. + Specifically, the IEEE 802.1Q counters for Discard + Inbound and Discard on Ingress Filtering." + REFERENCE + "IEEE 802.1Q/D11 Section 12.6.1.1.3" + ::= { dot1qPortVlanStatisticsEntry 3 } + +dot1qTpVlanPortInOverflowFrames OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of times the associated + dot1qTpVlanPortInFrames counter has overflowed." + REFERENCE + "ISO/IEC 15802-3 Section 14.6.1.1.3" + ::= { dot1qPortVlanStatisticsEntry 4 } + +dot1qTpVlanPortOutOverflowFrames OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of times the associated + dot1qTpVlanPortOutFrames counter has overflowed." + REFERENCE + "ISO/IEC 15802-3 Section 14.6.1.1.3" + ::= { dot1qPortVlanStatisticsEntry 5 } + +dot1qTpVlanPortInOverflowDiscards OBJECT-TYPE + + + + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of times the associated + dot1qTpVlanPortInDiscards counter has overflowed." + REFERENCE + "ISO/IEC 15802-3 Section 14.6.1.1.3" + ::= { dot1qPortVlanStatisticsEntry 6 } + +dot1qPortVlanHCStatisticsTable OBJECT-TYPE + SYNTAX SEQUENCE OF Dot1qPortVlanHCStatisticsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table containing per-port, per-VLAN statistics for + traffic on high-capacity interfaces." + ::= { dot1qVlan 7 } + +dot1qPortVlanHCStatisticsEntry OBJECT-TYPE + SYNTAX Dot1qPortVlanHCStatisticsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Traffic statistics for a VLAN on a high-capacity + interface." + INDEX { dot1dBasePort, dot1qVlanIndex } + ::= { dot1qPortVlanHCStatisticsTable 1 } + +Dot1qPortVlanHCStatisticsEntry ::= + SEQUENCE { + dot1qTpVlanPortHCInFrames + Counter64, + dot1qTpVlanPortHCOutFrames + Counter64, + dot1qTpVlanPortHCInDiscards + Counter64 + } + +dot1qTpVlanPortHCInFrames OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of valid frames received by this port from + its segment that were classified as belonging to this + VLAN. Note that a frame received on this port is + counted by this object if and only if it is for a + + + + protocol being processed by the local forwarding process + for this VLAN. This object includes received bridge + management frames classified as belonging to this VLAN + (e.g., GMRP, but not GVRP or STP)." + REFERENCE + "IEEE 802.1Q/D11 Section 12.6.1.1.3(a)" + ::= { dot1qPortVlanHCStatisticsEntry 1 } + +dot1qTpVlanPortHCOutFrames OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of valid frames transmitted by this port to + its segment from the local forwarding process for this + VLAN. This includes bridge management frames originated + by this device that are classified as belonging to this + VLAN (e.g., GMRP, but not GVRP or STP)." + REFERENCE + "IEEE 802.1Q/D11 Section 12.6.1.1.3(d)" + ::= { dot1qPortVlanHCStatisticsEntry 2 } + +dot1qTpVlanPortHCInDiscards OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of valid frames received by this port from + its segment that were classified as belonging to this + VLAN and that were discarded due to VLAN-related reasons. + Specifically, the IEEE 802.1Q counters for Discard + Inbound and Discard on Ingress Filtering." + REFERENCE + "IEEE 802.1Q/D11 Section 12.6.1.1.3" + ::= { dot1qPortVlanHCStatisticsEntry 3 } + +-- ------------------------------------------------------------- +-- The VLAN Learning Constraints Table +-- ------------------------------------------------------------- + +dot1qLearningConstraintsTable OBJECT-TYPE + SYNTAX SEQUENCE OF Dot1qLearningConstraintsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table containing learning constraints for sets of + Shared and Independent VLANs." + REFERENCE + + + + "IEEE 802.1Q/D11 Section 12.10.3.1" + ::= { dot1qVlan 8 } + +dot1qLearningConstraintsEntry OBJECT-TYPE + SYNTAX Dot1qLearningConstraintsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A learning constraint defined for a VLAN." + INDEX { dot1qConstraintVlan, dot1qConstraintSet } + ::= { dot1qLearningConstraintsTable 1 } + +Dot1qLearningConstraintsEntry ::= + SEQUENCE { + dot1qConstraintVlan + VlanIndex, + dot1qConstraintSet + Integer32, + dot1qConstraintType + INTEGER, + dot1qConstraintStatus + RowStatus + } + +dot1qConstraintVlan OBJECT-TYPE + SYNTAX VlanIndex + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The index of the row in dot1qVlanCurrentTable for the + VLAN constrained by this entry." + ::= { dot1qLearningConstraintsEntry 1 } + +dot1qConstraintSet OBJECT-TYPE + SYNTAX Integer32 (0..65535) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The identity of the constraint set to which + dot1qConstraintVlan belongs. These values may be chosen + by the management station." + ::= { dot1qLearningConstraintsEntry 2 } + +dot1qConstraintType OBJECT-TYPE + SYNTAX INTEGER { + independent(1), + shared(2) + } + + + + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The type of constraint this entry defines. + independent(1) - the VLAN, dot1qConstraintVlan, + uses a filtering database independent from all + other VLANs in the same set, defined by + dot1qConstraintSet. + shared(2) - the VLAN, dot1qConstraintVlan, shares + the same filtering database as all other VLANs + in the same set, defined by dot1qConstraintSet." + ::= { dot1qLearningConstraintsEntry 3 } + +dot1qConstraintStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The status of this entry." + ::= { dot1qLearningConstraintsEntry 4 } + +dot1qConstraintSetDefault OBJECT-TYPE + SYNTAX Integer32 (0..65535) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The identity of the constraint set to which a VLAN + belongs, if there is not an explicit entry for that VLAN + in dot1qLearningConstraintsTable. + + The value of this object MUST be retained across + reinitializations of the management system." + ::= { dot1qVlan 9 } + +dot1qConstraintTypeDefault OBJECT-TYPE + SYNTAX INTEGER { + independent(1), + shared(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The type of constraint set to which a VLAN belongs, if + there is not an explicit entry for that VLAN in + dot1qLearningConstraintsTable. The types are as defined + for dot1qConstraintType. + + The value of this object MUST be retained across + + + + reinitializations of the management system." + ::= { dot1qVlan 10 } + +-- ------------------------------------------------------------- +-- dot1vProtocol subtree +-- ------------------------------------------------------------- + +dot1vProtocolGroupTable OBJECT-TYPE + SYNTAX SEQUENCE OF Dot1vProtocolGroupEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table that contains mappings from Protocol + Templates to Protocol Group Identifiers used for + Port-and-Protocol-based VLAN Classification." + REFERENCE + "IEEE 802.1v clause 8.6.4" + ::= { dot1vProtocol 1 } + +dot1vProtocolGroupEntry OBJECT-TYPE + SYNTAX Dot1vProtocolGroupEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A mapping from a Protocol Template to a Protocol + Group Identifier." + INDEX { dot1vProtocolTemplateFrameType, + dot1vProtocolTemplateProtocolValue } + ::= { dot1vProtocolGroupTable 1 } + +Dot1vProtocolGroupEntry ::= + SEQUENCE { + dot1vProtocolTemplateFrameType + INTEGER, + dot1vProtocolTemplateProtocolValue + OCTET STRING, + dot1vProtocolGroupId + Integer32, + dot1vProtocolGroupRowStatus + RowStatus + } + +dot1vProtocolTemplateFrameType OBJECT-TYPE + SYNTAX INTEGER { + ethernet (1), + rfc1042 (2), + snap8021H (3), + snapOther (4), + + + + llcOther (5) + } + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The data-link encapsulation format or the + 'detagged_frame_type' in a Protocol Template." + REFERENCE + "IEEE 802.1v clause 8.6.2" + ::= { dot1vProtocolGroupEntry 1 } + +dot1vProtocolTemplateProtocolValue OBJECT-TYPE + SYNTAX OCTET STRING (SIZE (2 | 5)) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The identification of the protocol above the data-link + layer in a Protocol Template. Depending on the + frame type, the octet string will have one of the + following values: + + For 'ethernet', 'rfc1042' and 'snap8021H', + this is the 16-bit (2-octet) IEEE 802.3 Type Field. + For 'snapOther', + this is the 40-bit (5-octet) PID. + For 'llcOther', + this is the 2-octet IEEE 802.2 Link Service Access + Point (LSAP) pair: first octet for Destination Service + Access Point (DSAP) and second octet for Source Service + Access Point (SSAP)." + REFERENCE + "IEEE 802.1v clause 8.6.2" + ::= { dot1vProtocolGroupEntry 2 } + +dot1vProtocolGroupId OBJECT-TYPE + SYNTAX Integer32 (0..2147483647) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Represents a group of protocols that are associated + together when assigning a VID to a frame." + REFERENCE + "IEEE 802.1v clause 8.6.3, 12.10.2.1" + ::= { dot1vProtocolGroupEntry 3 } + +dot1vProtocolGroupRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + + + + STATUS current + DESCRIPTION + "This object indicates the status of this entry." + ::= { dot1vProtocolGroupEntry 4 } + +dot1vProtocolPortTable OBJECT-TYPE + SYNTAX SEQUENCE OF Dot1vProtocolPortEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table that contains VID sets used for + Port-and-Protocol-based VLAN Classification." + REFERENCE + "IEEE 802.1v clause 8.4.4" + ::= { dot1vProtocol 2 } + +dot1vProtocolPortEntry OBJECT-TYPE + SYNTAX Dot1vProtocolPortEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A VID set for a port." + INDEX { dot1dBasePort, + dot1vProtocolPortGroupId } + ::= { dot1vProtocolPortTable 1 } + +Dot1vProtocolPortEntry ::= + SEQUENCE { + dot1vProtocolPortGroupId + Integer32, + dot1vProtocolPortGroupVid + Integer32, + dot1vProtocolPortRowStatus + RowStatus + } + +dot1vProtocolPortGroupId OBJECT-TYPE + SYNTAX Integer32 (1..2147483647) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Designates a group of protocols in the Protocol + Group Database." + REFERENCE + "IEEE 802.1v clause 8.6.3, 12.10.1.2" + ::= { dot1vProtocolPortEntry 1 } + +dot1vProtocolPortGroupVid OBJECT-TYPE + + + + SYNTAX Integer32 (1..4094) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The VID associated with a group of protocols for + each port." + REFERENCE + "IEEE 802.1v clause 8.4.4, 12.10.1.2" + ::= { dot1vProtocolPortEntry 2 } + +dot1vProtocolPortRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object indicates the status of this entry." + ::= { dot1vProtocolPortEntry 3 } + +-- ------------------------------------------------------------- +-- IEEE 802.1Q MIB - Conformance Information +-- ------------------------------------------------------------- + +qBridgeConformance OBJECT IDENTIFIER ::= { qBridgeMIB 2 } + +qBridgeGroups OBJECT IDENTIFIER ::= { qBridgeConformance 1 } + +qBridgeCompliances OBJECT IDENTIFIER ::= { qBridgeConformance 2 } + +-- ------------------------------------------------------------- +-- units of conformance +-- ------------------------------------------------------------- + +qBridgeBaseGroup OBJECT-GROUP + OBJECTS { + dot1qVlanVersionNumber, + dot1qMaxVlanId, + dot1qMaxSupportedVlans, + dot1qNumVlans, + dot1qGvrpStatus + } + STATUS current + DESCRIPTION + "A collection of objects providing device-level control + and status information for the Virtual LAN bridge + services." + ::= { qBridgeGroups 1 } + +qBridgeFdbUnicastGroup OBJECT-GROUP + + + + OBJECTS { + dot1qFdbDynamicCount, + dot1qTpFdbPort, + dot1qTpFdbStatus + } + STATUS current + DESCRIPTION + "A collection of objects providing information about all + unicast addresses, learned dynamically or statically + configured by management, in each Filtering Database." + ::= { qBridgeGroups 2 } + +qBridgeFdbMulticastGroup OBJECT-GROUP + OBJECTS { + dot1qTpGroupEgressPorts, + dot1qTpGroupLearnt + } + STATUS current + DESCRIPTION + "A collection of objects providing information about all + multicast addresses, learned dynamically or statically + configured by management, in each Filtering Database." + ::= { qBridgeGroups 3 } + +qBridgeServiceRequirementsGroup OBJECT-GROUP + OBJECTS { + dot1qForwardAllPorts, + dot1qForwardAllStaticPorts, + dot1qForwardAllForbiddenPorts, + dot1qForwardUnregisteredPorts, + dot1qForwardUnregisteredStaticPorts, + dot1qForwardUnregisteredForbiddenPorts + } + STATUS current + DESCRIPTION + "A collection of objects providing information about + service requirements, learned dynamically or statically + configured by management, in each Filtering Database." + ::= { qBridgeGroups 4 } + +qBridgeFdbStaticGroup OBJECT-GROUP + OBJECTS { + dot1qStaticUnicastAllowedToGoTo, + dot1qStaticUnicastStatus, + dot1qStaticMulticastStaticEgressPorts, + dot1qStaticMulticastForbiddenEgressPorts, + dot1qStaticMulticastStatus + } + + + + STATUS current + DESCRIPTION + "A collection of objects providing information about + unicast and multicast addresses statically configured by + management, in each Filtering Database or VLAN." + ::= { qBridgeGroups 5 } + +qBridgeVlanGroup OBJECT-GROUP + OBJECTS { + dot1qVlanNumDeletes, + dot1qVlanFdbId, + dot1qVlanCurrentEgressPorts, + dot1qVlanCurrentUntaggedPorts, + dot1qVlanStatus, + dot1qVlanCreationTime + } + STATUS current + DESCRIPTION + "A collection of objects providing information about + all VLANs currently configured on this device." + ::= { qBridgeGroups 6 } + +qBridgeVlanStaticGroup OBJECT-GROUP + OBJECTS { + dot1qVlanStaticName, + dot1qVlanStaticEgressPorts, + dot1qVlanForbiddenEgressPorts, + dot1qVlanStaticUntaggedPorts, + dot1qVlanStaticRowStatus, + dot1qNextFreeLocalVlanIndex + } + STATUS current + DESCRIPTION + "A collection of objects providing information about + VLANs statically configured by management." + ::= { qBridgeGroups 7 } + +qBridgePortGroup OBJECT-GROUP + OBJECTS { + dot1qPvid, + dot1qPortAcceptableFrameTypes, + dot1qPortIngressFiltering, + dot1qPortGvrpStatus, + dot1qPortGvrpFailedRegistrations, + dot1qPortGvrpLastPduOrigin + } + STATUS deprecated + DESCRIPTION + + + + "A collection of objects providing port-level VLAN + control and status information for all ports." + ::= { qBridgeGroups 8 } + +qBridgeVlanStatisticsGroup OBJECT-GROUP + OBJECTS { + dot1qTpVlanPortInFrames, + dot1qTpVlanPortOutFrames, + dot1qTpVlanPortInDiscards + } + STATUS current + DESCRIPTION + "A collection of objects providing per-port packet + statistics for all VLANs currently configured on this + device." + ::= { qBridgeGroups 9 } + +qBridgeVlanStatisticsOverflowGroup OBJECT-GROUP + OBJECTS { + dot1qTpVlanPortInOverflowFrames, + dot1qTpVlanPortOutOverflowFrames, + dot1qTpVlanPortInOverflowDiscards + } + STATUS current + DESCRIPTION + "A collection of objects providing overflow counters for + per-port packet statistics for all VLANs currently configured + on this device for high-capacity interfaces, defined as those + that have the value of the corresponding instance of + ifSpeed greater than 650,000,000 bits/second." + ::= { qBridgeGroups 10 } + +qBridgeVlanHCStatisticsGroup OBJECT-GROUP + OBJECTS { + dot1qTpVlanPortHCInFrames, + dot1qTpVlanPortHCOutFrames, + dot1qTpVlanPortHCInDiscards + } + STATUS current + DESCRIPTION + "A collection of objects providing per-port packet + statistics for all VLANs currently configured on this + device for high-capacity interfaces, defined as those + that have the value of the corresponding instance of + ifSpeed greater than 650,000,000 bits/second." + ::= { qBridgeGroups 11 } + +qBridgeLearningConstraintsGroup OBJECT-GROUP + + + + OBJECTS { + dot1qConstraintType, + dot1qConstraintStatus + } + STATUS current + DESCRIPTION + "A collection of objects defining the Filtering Database + constraints all VLANs have with each other." + ::= { qBridgeGroups 12 } + +qBridgeLearningConstraintDefaultGroup OBJECT-GROUP + OBJECTS { + dot1qConstraintSetDefault, + dot1qConstraintTypeDefault + } + STATUS current + DESCRIPTION + "A collection of objects defining the default Filtering + Database constraints for VLANs that have no specific + constraints defined." + ::= { qBridgeGroups 13 } + +qBridgeClassificationDeviceGroup OBJECT-GROUP + OBJECTS { + dot1vProtocolGroupId, + dot1vProtocolGroupRowStatus + } + STATUS current + DESCRIPTION + "VLAN classification information for the bridge." + ::= { qBridgeGroups 14 } + +qBridgeClassificationPortGroup OBJECT-GROUP + OBJECTS { + dot1vProtocolPortGroupVid, + dot1vProtocolPortRowStatus + } + STATUS current + DESCRIPTION + "VLAN classification information for individual ports." + ::= { qBridgeGroups 15 } + +qBridgePortGroup2 OBJECT-GROUP + OBJECTS { + dot1qPvid, + dot1qPortAcceptableFrameTypes, + dot1qPortIngressFiltering, + dot1qPortGvrpStatus, + + + + dot1qPortGvrpFailedRegistrations, + dot1qPortGvrpLastPduOrigin, + dot1qPortRestrictedVlanRegistration + } + STATUS current + DESCRIPTION + "A collection of objects providing port-level VLAN + control and status information for all ports." + ::= { qBridgeGroups 16 } + +-- ------------------------------------------------------------- +-- compliance statements +-- ------------------------------------------------------------- + +qBridgeCompliance MODULE-COMPLIANCE + STATUS deprecated + DESCRIPTION + "The compliance statement for device support of Virtual + LAN Bridge services. + + RFC2674 was silent about the expected persistence of the + read-write objects in this MIB module. Applications MUST + NOT assume that the values of the read-write objects are + persistent across reinitializations of the management + system and MUST NOT assume that the values are not + persistent across reinitializations of the management + system." + + MODULE + MANDATORY-GROUPS { + qBridgeBaseGroup, + qBridgeVlanGroup, + qBridgeVlanStaticGroup, + qBridgePortGroup + } + + GROUP qBridgeFdbUnicastGroup + DESCRIPTION + "This group is mandatory for bridges that implement + 802.1Q transparent bridging." + + GROUP qBridgeFdbMulticastGroup + DESCRIPTION + "This group is mandatory for bridges that implement + 802.1Q transparent bridging." + + GROUP qBridgeServiceRequirementsGroup + DESCRIPTION + + + + "This group is mandatory for bridges that implement + extended filtering services. All objects must be + read-write if extended-filtering services are + enabled." + + GROUP qBridgeFdbStaticGroup + DESCRIPTION + "This group is optional." + + GROUP qBridgeVlanStatisticsGroup + DESCRIPTION + "This group is optional as there may be significant + implementation cost associated with its support." + + GROUP qBridgeVlanStatisticsOverflowGroup + DESCRIPTION + "This group is optional as there may be significant + implementation cost associated with its support. It is most + relevant for high-capacity interfaces where the SNMP agent + supports only SNMPv1." + + GROUP qBridgeVlanHCStatisticsGroup + DESCRIPTION + "This group is optional as there may be significant + implementation cost associated with its support. It is most + relevant for high-capacity interfaces." + + GROUP qBridgeLearningConstraintsGroup + DESCRIPTION + "This group is mandatory for devices implementing + both Independent VLAN Learning (IVL) and Shared + VLAN Learning (SVL) modes of operation of the + filtering database, as defined by IEEE 802.1Q." + + GROUP qBridgeLearningConstraintDefaultGroup + DESCRIPTION + "This group is mandatory for devices implementing + both Independent VLAN Learning (IVL) and Shared + VLAN Learning (SVL) modes of operation of the + filtering database, as defined by IEEE 802.1Q." + + OBJECT dot1qPortAcceptableFrameTypes + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required as this is an optional + capability in IEEE 802.1Q." + + OBJECT dot1qPortIngressFiltering + + + + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required as this is an optional + capability in IEEE 802.1Q." + + OBJECT dot1qConstraintSetDefault + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required as this is an optional + capability in IEEE 802.1Q." + + OBJECT dot1qConstraintTypeDefault + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required as this is an optional + capability in IEEE 802.1Q." + + ::= { qBridgeCompliances 1 } + +qBridgeCompliance2 MODULE-COMPLIANCE + STATUS current + DESCRIPTION + "The compliance statement for device support of Virtual + LAN Bridge services. + + This document clarifies the persistence requirements for + the read-write objects in this MIB module. All + implementations claiming compliance to qBridgeCompliance2 + MUST retain the values of those read-write objects that + specify this requirement." + + MODULE + MANDATORY-GROUPS { + qBridgeBaseGroup, + qBridgeVlanGroup, + qBridgeVlanStaticGroup, + qBridgePortGroup2 + } + + GROUP qBridgeFdbUnicastGroup + DESCRIPTION + "This group is mandatory for bridges that implement + 802.1Q transparent bridging." + + GROUP qBridgeFdbMulticastGroup + DESCRIPTION + "This group is mandatory for bridges that implement + 802.1Q transparent bridging." + + + + GROUP qBridgeServiceRequirementsGroup + DESCRIPTION + "This group is mandatory for bridges that implement + extended filtering services. All objects must be + read-write if extended-filtering services are + enabled." + + GROUP qBridgeFdbStaticGroup + DESCRIPTION + "This group is optional." + + GROUP qBridgeVlanStatisticsGroup + DESCRIPTION + "This group is optional as there may be significant + implementation cost associated with its support." + + GROUP qBridgeVlanStatisticsOverflowGroup + DESCRIPTION + "This group is optional as there may be significant + implementation cost associated with its support. It is most + relevant for high-capacity interfaces where the SNMP agent + supports only SNMPv1." + + GROUP qBridgeVlanHCStatisticsGroup + DESCRIPTION + "This group is optional as there may be significant + implementation cost associated with its support. It is most + relevant for high-capacity interfaces." + + GROUP qBridgeLearningConstraintsGroup + DESCRIPTION + "This group is mandatory for devices implementing + both Independent VLAN Learning (IVL) and Shared + VLAN Learning (SVL) modes of operation of the + filtering database, as defined by IEEE 802.1Q." + + GROUP qBridgeLearningConstraintDefaultGroup + DESCRIPTION + "This group is mandatory for devices implementing + both Independent VLAN Learning (IVL) and Shared + VLAN Learning (SVL) modes of operation of the + filtering database, as defined by IEEE 802.1Q." + + GROUP qBridgeClassificationDeviceGroup + DESCRIPTION + "This group is mandatory ONLY for devices implementing + VLAN Classification as specified in IEEE 802.1v." + + + + + GROUP qBridgeClassificationPortGroup + DESCRIPTION + "This group is mandatory ONLY for devices implementing + VLAN Classification as specified in IEEE 802.1v." + + OBJECT dot1qPortAcceptableFrameTypes + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required as this is an optional + capability in IEEE 802.1Q." + + OBJECT dot1qPortIngressFiltering + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required as this is an optional + capability in IEEE 802.1Q." + + OBJECT dot1qConstraintSetDefault + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required as this is an optional + capability in IEEE 802.1Q." + + OBJECT dot1qConstraintTypeDefault + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required as this is an optional + capability in IEEE 802.1Q." + + OBJECT dot1vProtocolGroupId + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required as this is an optional + capability in IEEE 802.1v." + + OBJECT dot1vProtocolGroupRowStatus + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required as this is an optional + capability in IEEE 802.1v." + + ::= { qBridgeCompliances 2 } + +END |