diff options
Diffstat (limited to 'MIBS/NetWare-Host-Ext-MIB')
| -rw-r--r-- | MIBS/NetWare-Host-Ext-MIB | 1094 |
1 files changed, 1094 insertions, 0 deletions
diff --git a/MIBS/NetWare-Host-Ext-MIB b/MIBS/NetWare-Host-Ext-MIB new file mode 100644 index 0000000..0896e8d --- /dev/null +++ b/MIBS/NetWare-Host-Ext-MIB @@ -0,0 +1,1094 @@ +NetWare-Host-Ext-MIB DEFINITIONS ::= BEGIN + + -- + -- This MIB document is 'WORK IN PROGRESS' of Novell, Inc. + -- As such, it is subject to change, without notice, until + -- such time as it is formally released and this disclaimer + -- removed. + -- + -- This MIB defines extensions to the HOST-RESOURCES-MIB + -- for Novell NetWare servers. + -- + -- Last Updated: August 9, 1994 + -- + + IMPORTS + enterprises, Counter + FROM RFC1155-SMI + + OBJECT-TYPE + FROM RFC-1212 + ifIndex + FROM RFC1213-MIB + + hrDeviceIndex + FROM HOST-RESOURCES-MIB; + + + -- This data type is used to model textual information in some + -- character set. A network management station should use a local + -- algorithm to determine which character set is in use and how it + -- should be displayed. Note that this character set may be encoded + -- with more than one octet per symbol, but will most often be NVT + -- ASCII. + + + -- Identifies a transport protocol. + -- + TransportDomain ::= INTEGER { + noAddress(1), + ipx(2), + ip(3), + appleTalkDDP(4) + } + -- A representation of a transport address in the domain + -- specified by a paired object of type TransportDomain. + -- + TransportAddress ::= OCTET STRING + -- + + + novell OBJECT IDENTIFIER ::= { enterprises 23 } + mibDoc OBJECT IDENTIFIER ::= { novell 2 } + + nwHostExtensions OBJECT IDENTIFIER ::= { mibDoc 27 } + + nwhrStorage OBJECT IDENTIFIER ::= { nwHostExtensions 2 } + nwhrDevice OBJECT IDENTIFIER ::= { nwHostExtensions 3 } + nwhrOdi OBJECT IDENTIFIER ::= { nwHostExtensions 10 } + -- + -- Extensions to the hrStorage Group + -- + + -- Registration for NetWare storage types, for use with + -- hrStorageType of hrStorageEntry in HOST-RESOURCES-MIB + + nwhrStorageTypes + OBJECT IDENTIFIER ::= { nwhrStorage 1 } + + nwhrStorageVolume + OBJECT IDENTIFIER ::= { nwhrStorageTypes 1 } + nwhrStorageMemoryPermanent + OBJECT IDENTIFIER ::= { nwhrStorageTypes 2 } + nwhrStorageMemoryAlloc + OBJECT IDENTIFIER ::= { nwhrStorageTypes 3 } + nwhrStorageCacheBuffers + OBJECT IDENTIFIER ::= { nwhrStorageTypes 4 } + nwhrStorageCacheMovable + OBJECT IDENTIFIER ::= { nwhrStorageTypes 5 } + nwhrStorageCacheNonMovable + OBJECT IDENTIFIER ::= { nwhrStorageTypes 6 } + nwhrStorageCodeAndDataMemory + OBJECT IDENTIFIER ::= { nwhrStorageTypes 7 } + nwhrStorageDOSMemory + OBJECT IDENTIFIER ::= { nwhrStorageTypes 8 } + nwhrStorageIOEngineMemory + OBJECT IDENTIFIER ::= { nwhrStorageTypes 9 } + nwhrStorageMSEngineMemory + OBJECT IDENTIFIER ::= { nwhrStorageTypes 10 } + nwhrStorageUnclaimedMemory + OBJECT IDENTIFIER ::= { nwhrStorageTypes 11 } + -- + -- Extensions to the hrDevice Group + -- + + -- Registration for NetWare device types, for use with + -- hrDeviceType of hrDeviceEntry in HOST-RESOURCES-MIB + + nwhrDeviceTypes OBJECT IDENTIFIER ::= { nwhrDevice 1 } + + nwhrDeviceMirroredServerLink + OBJECT IDENTIFIER ::= { nwhrDeviceTypes 1 } + + + -- memory size, expressed in units of 1024bytes + KBytes ::= INTEGER (0..2147483647) + + InternationalDisplayString ::= OCTET STRING + -- This data type is used to model textual information in some + -- character set. A network management station should use a local + -- algorithm to determine which character set is in use and how it + -- should be displayed. Note that this character set may be encoded + -- with more than one octet per symbol, but will most often be NVT + -- ASCII. + + -- + -- Extensions to the hrDeviceTable + -- + + nwhrDeviceTable OBJECT-TYPE + SYNTAX SEQUENCE OF NwhrDeviceEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "Extensions to the (conceptual) table of devices + contained by the host" + ::= { nwhrDevice 2 } + + nwhrDeviceEntry OBJECT-TYPE + SYNTAX NwhrDeviceEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "Extensions to a (conceptual) entry for one device + contained by the host" + INDEX { hrDeviceIndex } + ::= { nwhrDeviceTable 1 } + + NwhrDeviceEntry ::= SEQUENCE { + nwhrDeviceAdapterIndex INTEGER, + nwhrDeviceControllerNumber INTEGER, + nwhrDeviceNumber INTEGER + } + + nwhrDeviceAdapterIndex OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The index into the nwhrAdapterTable of the + adapter/controller to which this device is attached (or + physically manifested by, for logical device). Zero if + not applicable." + ::= { nwhrDeviceEntry 1 } + + nwhrDeviceControllerNumber OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The controller number (relative to its adapter), or + the SCSI target ID, or zero if not applicable. Note + that zero is a valid value for both controller number + and SCSI Target ID." + ::= { nwhrDeviceEntry 2 } + + nwhrDeviceNumber OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The device number (relative to its controller), or the + SCSI LUN (Logical Unit Number), or zero if not + applicable. Note that zero is a valid value for both + device number and SCSI LUN." + ::= { nwhrDeviceEntry 3 } + + nwhrProcessorCount OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of processor devices contained in this + host" + ::= { nwhrDevice 3 } + + nwhrPrinterCount OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of printer devices contained in this host" + ::= { nwhrDevice 4 } + + nwhrDiskStorageCount OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of Disk Storage devices contained in this + host." + ::= { nwhrDevice 5 } + + + -- + -- Extensions to the hrDiskStorageTable + -- + + nwhrDiskStorageTable OBJECT-TYPE + SYNTAX SEQUENCE OF NwhrDiskStorageEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "Extensions to the hrDiskStorageTable" + ::= { nwhrDevice 6 } + + nwhrDiskStorageEntry OBJECT-TYPE + SYNTAX NwhrDiskStorageEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "Extensions to the hrDiskStorageEntry" + INDEX { hrDeviceIndex } + ::= { nwhrDiskStorageTable 1 } + + NwhrDiskStorageEntry ::= SEQUENCE { + nwhrDiskStorageHeads INTEGER, + nwhrDiskStorageCylinders INTEGER, + nwhrDiskStorageSectorsPerTrack INTEGER, + nwhrDiskStorageSectorSize INTEGER, + nwhrDiskStorageBlockSize INTEGER + } + + nwhrDiskStorageHeads OBJECT-TYPE + + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of read/write heads on the drive" + ::= { nwhrDiskStorageEntry 1 } + + nwhrDiskStorageCylinders OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of cylinders on the drive." + ::= { nwhrDiskStorageEntry 2 } + + nwhrDiskStorageSectorsPerTrack OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of sectors per track on the drive." + ::= { nwhrDiskStorageEntry 3 } + + nwhrDiskStorageSectorSize OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The size of a sector in bytes." + ::= { nwhrDiskStorageEntry 4 } + + nwhrDiskStorageBlockSize OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The driver maximum I/O request size in bytes." + ::= { nwhrDiskStorageEntry 5 } + + + -- + -- The Physical Partition Table + -- + + nwhrPhysicalPartitionTable OBJECT-TYPE + SYNTAX SEQUENCE OF NwhrPhysicalPartitionEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "A table of physical partitions for long-term storage + devices contained by the host." + ::= { nwhrDevice 7 } + + nwhrPhysicalPartitionEntry OBJECT-TYPE + SYNTAX NwhrPhysicalPartitionEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "An entry for one partition. The hrDeviceIndex in the + index represents the entry in the hrDeviceTable that + corresponds to the nwhrPhysicalPartitionEntry." + INDEX { hrDeviceIndex, nwhrPhysicalPartitionIndex } + ::= { nwhrPhysicalPartitionTable 1 } + NwhrPhysicalPartitionEntry ::= SEQUENCE { + nwhrPhysicalPartitionIndex INTEGER, + nwhrPhysicalPartitionType INTEGER, + nwhrPhysicalPartitionDescr InternationalDisplayString, + nwhrPhysicalPartitionSize KBytes + } + + nwhrPhysicalPartitionIndex OBJECT-TYPE + SYNTAX INTEGER (0..2147483647) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "A unique value for each physical partition on this + long-term storage device. The value for each long-term + storage device must remain constant from one re- + initialization of the agent to the next re- + initialization." + ::= { nwhrPhysicalPartitionEntry 1 } + + nwhrPhysicalPartitionType OBJECT-TYPE + SYNTAX INTEGER { + other(1), + netWare(2), + dos(3), + inwDos(4) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The type of this physical partition." + ::= { nwhrPhysicalPartitionEntry 2 } + + nwhrPhysicalPartitionDescr OBJECT-TYPE + SYNTAX InternationalDisplayString (SIZE (0..128)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "A textual description of this partition." + ::= { nwhrPhysicalPartitionEntry 3 } + + nwhrPhysicalPartitionSize OBJECT-TYPE + SYNTAX KBytes + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The size (in Kilobytes) of this physical partition." + ::= { nwhrPhysicalPartitionEntry 4 } + + + -- + -- The Hotfix Table + -- + -- The table of hotfix redirection areas for all NetWare + -- partitions on the host. + -- + -- An entry is placed in the hotfix table for each device in + -- the host whose type is `hrDeviceDiskStorage' and it + -- contains a NetWare partition. + -- + + nwhrHotfixTable OBJECT-TYPE + SYNTAX SEQUENCE OF NwhrHotfixEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "The table of hotfix areas of diskStorage devices + contained by the host. + + Note that this table is potentially sparse: an entry + exists if the corresponding value of the hrDeviceType + object is `hrDeviceDiskStorage' and a NetWare partition + exists on the device." + ::= { nwhrDevice 8 } + + nwhrHotfixEntry OBJECT-TYPE + SYNTAX NwhrHotfixEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "An entry for one hotfix redirection area contained by + the host." + INDEX { hrDeviceIndex, nwhrPhysicalPartitionIndex } + ::= { nwhrHotfixTable 1 } + + NwhrHotfixEntry ::= SEQUENCE { + nwhrHotfixUnits INTEGER, + nwhrHotfixTotal INTEGER, + nwhrHotfixUsed INTEGER, + nwhrHotfixReserved INTEGER + } + + nwhrHotfixUnits OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The size, in bytes, of the hotfix blocks." + ::= { nwhrHotfixEntry 1 } + + nwhrHotfixTotal OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The size of the total hotfix redirection area + represented by this entry, in units of + nwhrHotfixUnits." + ::= { nwhrHotfixEntry 2 } + + nwhrHotfixUsed OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of hotfix redirected blocks, i.e. the + number of bad blocks that hotfix has found." + ::= { nwhrHotfixEntry 3 } + + nwhrHotfixReserved OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of hotfix redirection blocks reserved for + system use." + ::= { nwhrHotfixEntry 4 } + + + -- + -- The Adapter Table + -- + nwhrAdapterCount OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of adapters contained in this host." + ::= { nwhrDevice 9 } + + nwhrAdapterTable OBJECT-TYPE + SYNTAX SEQUENCE OF NwhrAdapterEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "General information for each adapter board in the + host: driver name and version, Interrupt, DMA, I/O + address, and number of attached devices." + ::= { nwhrDevice 10 } + + nwhrAdapterEntry OBJECT-TYPE + SYNTAX NwhrAdapterEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "General information for a particular adapter board in + the host: driver name and version, Interrupt, DMA, I/O + address, and number of attached devices." + INDEX { nwhrAdapterIndex } + ::= { nwhrAdapterTable 1 } + + NwhrAdapterEntry ::= SEQUENCE { + nwhrAdapterIndex INTEGER, + nwhrAdapterType OBJECT IDENTIFIER, + nwhrAdapterDescr InternationalDisplayString, + nwhrAdapterDriverDescr InternationalDisplayString, + nwhrAdapterDriverMajorVer INTEGER, + nwhrAdapterDriverMinorVer INTEGER, + nwhrAdapterPort1 INTEGER, + nwhrAdapterPort1Len INTEGER, + nwhrAdapterPort2 INTEGER, + nwhrAdapterPort2Len INTEGER, + nwhrAdapterMem1 INTEGER, + nwhrAdapterMem1Len INTEGER, + nwhrAdapterMem2 INTEGER, + nwhrAdapterMem2Len INTEGER, + nwhrAdapterDMA1 INTEGER, + nwhrAdapterDMA2 INTEGER, + nwhrAdapterInterrupt1 INTEGER, + nwhrAdapterInterrupt2 INTEGER, + nwhrAdapterSlot INTEGER, + nwhrAdapterDevices INTEGER + } + + nwhrAdapterIndex OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "A unique value for each adapter contained in the host. + The value for each adapter must remain constant at + least from one re-initialization of the agent to the + next re-initialization." + ::= { nwhrAdapterEntry 1 } + + nwhrAdapterType OBJECT-TYPE + SYNTAX OBJECT IDENTIFIER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "An indication of the type of adapter. This will + typically be one of the possible values of + hrDeviceType." + ::= { nwhrAdapterEntry 2 } + + nwhrAdapterDescr OBJECT-TYPE + SYNTAX InternationalDisplayString (SIZE(0..128)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "A description the hardware for this adapter. This + will usually include manufacturer, model, and version + information. For LAN adapters, this could include the + short board name and the boards burnt-in MAC address." + ::= { nwhrAdapterEntry 3 } + + nwhrAdapterDriverDescr OBJECT-TYPE + SYNTAX InternationalDisplayString (SIZE(0..128)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "A textual description of the driver for this adapter" + ::= { nwhrAdapterEntry 4 } + + nwhrAdapterDriverMajorVer OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The major version number of the adapter driver." + ::= { nwhrAdapterEntry 5 } + + nwhrAdapterDriverMinorVer OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The minor version number of the adapter driver." + ::= { nwhrAdapterEntry 6 } + + nwhrAdapterPort1 OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The primary I/O port block. This is the base address + of a block of I/O addresses decoded by the adapter. + The value will be zero if there is no I/O address + associated with this adapter." + ::= { nwhrAdapterEntry 7 } + + nwhrAdapterPort1Len OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of I/O ports in the block starting at + nwhrAdapterPort1. This value is used in conjunction + with nwhrAdapterPort1 to determine the I/O block used + by the adapter. The value will be zero if there is no + I/O address associated with this adapter." + ::= { nwhrAdapterEntry 8 } + + nwhrAdapterPort2 OBJECT-TYPE + + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The secondary I/O port block. This is the base + address of a block of I/O addresses decoded by the + adapter. The value will be zero if there is no + secondary I/O address associated with this adapter." + ::= { nwhrAdapterEntry 9 } + + nwhrAdapterPort2Len OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of I/O ports in the block starting at + nwhrAdapterPort2. This value is used in conjunction + with nwhrAdapterPort2 to determine the secondary I/O + block used by the adapter. The value will be zero if + there is no I/O address associated with this adapter." + ::= { nwhrAdapterEntry 10 } + + nwhrAdapterMem1 OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The primary Memory Address. This is the base address + of the primary block of memory space decoded by the + adapter. The value will be zero if there is no memory + address associated with this adapter." + ::= { nwhrAdapterEntry 11 } + + nwhrAdapterMem1Len OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The length, in bytes, of the primary memory address + block. From this value and nwhrAdapterMem1, a + determination can be made as to which memory address + ranges are in use by the adapter." + ::= { nwhrAdapterEntry 12 } + + nwhrAdapterMem2 OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The secondary Memory Address. This is the address of + the secondary block of memory space decoded by the + adapter. The value will be zero if there is no + secondary memory address associated with this adapter." + ::= { nwhrAdapterEntry 13 } + + nwhrAdapterMem2Len OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The length, in bytes, of the secondary memory address + block. From this value and nwhrAdapterMem2, a + determination can be made as to which memory address + ranges are in use by the adapter." + ::= { nwhrAdapterEntry 14 } + nwhrAdapterDMA1 OBJECT-TYPE + SYNTAX INTEGER (0..255) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The primary DMA channel used by the adapter. The value + will be 255 if this adapter does not use any DMA + channel." + ::= { nwhrAdapterEntry 15 } + + nwhrAdapterDMA2 OBJECT-TYPE + SYNTAX INTEGER (0..255) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The secondary DMA channel used by the adapter. The + value will be 255 if this adapter does not use a + secondary DMA channel." + ::= { nwhrAdapterEntry 16 } + + nwhrAdapterInterrupt1 OBJECT-TYPE + SYNTAX INTEGER (0..255) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The primary interrupt vector used by the adapter. The + value will be 255 if this adapter does not use any + Interrupt." + ::= { nwhrAdapterEntry 17 } + + nwhrAdapterInterrupt2 OBJECT-TYPE + SYNTAX INTEGER (0..255) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The secondary interrupt vector used by the adapter. + The value will be 255 if this adapter does not use a + secondary Interrupt." + ::= { nwhrAdapterEntry 18 } + + nwhrAdapterSlot OBJECT-TYPE + SYNTAX INTEGER (0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The slot in which the adapter resides. The value will + be zero if the slot information is not available on the + platform, such as an ISA based PC, otherwise the value + will be the slot number the adapter resides. The slot + number starts from 1." + ::= { nwhrAdapterEntry 19 } + + nwhrAdapterDevices OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of devices associated with this adapter. + For instance, the number of drives attached to a disk + controller." + ::= { nwhrAdapterEntry 20 } + + + -- + -- Mirrored Server Link (MSL) + -- + + nwhrMslCount OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of Mirrored Server Link (MSL) devices + contained in this host." + ::= { nwhrDevice 11 } + + + nwhrMslTable OBJECT-TYPE + SYNTAX SEQUENCE OF NwhrMslEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "The (conceptual) table of Mirrored Server Link (MSL) + devices contained by the host. + + Note that this table is potentially sparse: a + (conceptual) entry exists only if the corresponding + value of the hrDeviceType object is + nwhrDeviceMirroredServerLink" + ::= { nwhrDevice 12 } + + nwhrMslEntry OBJECT-TYPE + SYNTAX NwhrMslEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + " A (conceptual) entry for one Mirrored Server Link + (MSL) device contained by the host. The hrDeviceIndex + in the index represents the entry in the hrDeviceTable + that corresponds to the nwhrMslEntry." + INDEX { hrDeviceIndex } + ::= { nwhrMslTable 1 } + + NwhrMslEntry ::= SEQUENCE { + nwhrMslState INTEGER, + nwhrMslSpeed INTEGER, + nwhrMslSends Counter, + nwhrMslReceives Counter, + nwhrMslInErrors Counter, + nwhrMslOutErrors Counter + } + + nwhrMslState OBJECT-TYPE + SYNTAX INTEGER { + offline(1), + startup(2), + standby(3), + active(4) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The current state of this MSL device." + ::= { nwhrMslEntry 1 } + + nwhrMslSpeed OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The nominal bandwidth of the MSL link in bits per + second." + ::= { nwhrMslEntry 2 } + + nwhrMslSends OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of sends from this MSL device." + ::= { nwhrMslEntry 3 } + + nwhrMslReceives OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of receives by this MSL device." + ::= { nwhrMslEntry 4 } + + nwhrMslInErrors OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of errors in receives by this MSL device." + ::= { nwhrMslEntry 5 } + + nwhrMslOutErrors OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of errors on sends by this MSL device." + ::= { nwhrMslEntry 6 } + + + -- + -- The Printer Table + -- + + nwhrPrinterTable OBJECT-TYPE + SYNTAX SEQUENCE OF NwhrPrinterEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "A set of data for each accessible printer, whether + local or remote." + ::= { nwhrDevice 13 } + + nwhrPrinterEntry OBJECT-TYPE + SYNTAX NwhrPrinterEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "A set of data for a particular printer." + INDEX { nwhrPrinterID } + ::= { nwhrPrinterTable 1 } + NwhrPrinterEntry ::= SEQUENCE { + nwhrPrinterID INTEGER, + nwhrPrinterType INTEGER, + nwhrPrinterLocalName InternationalDisplayString, + nwhrPrinterQueueName InternationalDisplayString, + nwhrPrinterServerName InternationalDisplayString, + nwhrPrinterTransportDomain TransportDomain, + nwhrPrinterTransportAddress TransportAddress, + nwhrPrinterDeviceIndex INTEGER + } + + nwhrPrinterID OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "A unique value for each accessible printer. This + value will be constant for the lifetime of the + mapping." + ::= { nwhrPrinterEntry 1 } + + nwhrPrinterType OBJECT-TYPE + SYNTAX INTEGER { + other(1), + local(2), + netware(3), + unixware(4) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The type of the printer." + ::= { nwhrPrinterEntry 2 } + + nwhrPrinterLocalName OBJECT-TYPE + SYNTAX InternationalDisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The local name for the printer." + ::= { nwhrPrinterEntry 3 } + + nwhrPrinterQueueName OBJECT-TYPE + SYNTAX InternationalDisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The name of the print queue associated with this + printer. Zero length string if printer is local." + ::= { nwhrPrinterEntry 4 } + + nwhrPrinterServerName OBJECT-TYPE + SYNTAX InternationalDisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The name of the server containing the print queue. + Zero length string if printer is local." + ::= { nwhrPrinterEntry 5 } + + nwhrPrinterTransportDomain OBJECT-TYPE + SYNTAX TransportDomain + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The transport domain associated with the printer + (print queue)." + ::= { nwhrPrinterEntry 6 } + + nwhrPrinterTransportAddress OBJECT-TYPE + SYNTAX TransportAddress + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The transport address associated with this printer + (print queue). Zero length string if printer is + local." + ::= { nwhrPrinterEntry 7 } + + nwhrPrinterDeviceIndex OBJECT-TYPE + SYNTAX INTEGER (0..2147483647) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The value of hrDeviceIndex for this printer. Zero if + non-local." + ::= { nwhrPrinterEntry 8 } + -- + -- The ODI (Open Datalink Interface) Group + -- + + -- The ODI Group provides information about Link Support Layer + -- (LSL), LAN cards, WAN cards, logical LAN (frame), and + -- protocols. No statistics (except for LSL which is Novell + -- proprietary) are provided in these tables, management + -- stations should collect LAN statistics through the + -- standard MIB II, various Transmission MIBs and Protocol + -- MIBs. + + nwhrLslOutPkts OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The total number of of SendPacket requests made to the + LSL." + ::= { nwhrOdi 1 } + + nwhrLslInPkts OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The total number of GetStackECB requests made by MLIDs + to the LSL." + ::= { nwhrOdi 2 } + + nwhrLslUnclaimedPkts OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The total number of times a packet was received and + not consumed by a protocol stack." + ::= { nwhrOdi 3 } + + + -- + -- the Protocol Table + -- + + nwhrProtocolTable OBJECT-TYPE + SYNTAX SEQUENCE OF NwhrProtocolEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "The Protocol Table provides basic information about + protocols running in the host, management stations + should refer to the appropriate protocol MIBs for the + details about each protocol." + ::= { nwhrOdi 4 } + + nwhrProtocolEntry OBJECT-TYPE + SYNTAX NwhrProtocolEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "Information about a particular protocol." + INDEX { INTEGER, nwhrProtocolName } + ::= { nwhrProtocolTable 1 } + NwhrProtocolEntry ::= SEQUENCE { + nwhrProtocolName InternationalDisplayString, + nwhrProtocolID OCTET STRING, + nwhrProtocolAddress InternationalDisplayString, + nwhrProtocolOutPkts Counter, + nwhrProtocolInPkts Counter, + nwhrProtocolIgnoredPkts Counter, + nwhrProtocolFullName InternationalDisplayString + } + + nwhrProtocolName OBJECT-TYPE + SYNTAX InternationalDisplayString (SIZE(0..20)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The protocol name, for example, IPX, IP, ARP." + ::= { nwhrProtocolEntry 1 } + + nwhrProtocolID OBJECT-TYPE + SYNTAX OCTET STRING (SIZE(0..6)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The protocol identifier For example: + 000000000800 - IP for Ethernet II + 00080007809B - AppleTalk for Ethernet SNAP" + ::= { nwhrProtocolEntry 2 } + + nwhrProtocolAddress OBJECT-TYPE + SYNTAX InternationalDisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "This object provides protocol address information, for + example, the Network Address on IPX network, the IP + address on IP network. Note there is no format in the + InternationalDisplayString and the information is not + guaranteed available." + ::= { nwhrProtocolEntry 3 } + + nwhrProtocolOutPkts OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The total number of send packet requests made to the + LSL." + ::= { nwhrProtocolEntry 4 } + + nwhrProtocolInPkts OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The total number of incoming packets that were + consumed by the protocol." + ::= { nwhrProtocolEntry 5 } + + nwhrProtocolIgnoredPkts OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The total number of times the protocol receive handler + was called with look ahead and the protocol did not + return a receive ECB to the MLID to receive the packet" + ::= { nwhrProtocolEntry 6 } + + nwhrProtocolFullName OBJECT-TYPE + SYNTAX InternationalDisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The full name of the protocol name, for example, + 'DOD Internet Protocol'." + ::= { nwhrProtocolEntry 7 } + + + -- + -- Extensions to the MIB-II Interfaces table + -- + + nwhrIfTable OBJECT-TYPE + SYNTAX SEQUENCE OF NwhrIfEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "Extensions to MIB-II's Interfaces table to add some + NetWare specific info." + ::= { nwhrOdi 5 } + + nwhrIfEntry OBJECT-TYPE + SYNTAX NwhrIfEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "NetWare specific info for a particular interface." + INDEX { INTEGER } + ::= { nwhrIfTable 1 } + + NwhrIfEntry ::= SEQUENCE { + nwhrIfLogicalBoardNumber INTEGER, + nwhrIfFrameType InternationalDisplayString, + nwhrIfLogicalBoardName InternationalDisplayString + } + + nwhrIfLogicalBoardNumber OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The logical board number." + ::= { nwhrIfEntry 1 } + + nwhrIfFrameType OBJECT-TYPE + SYNTAX InternationalDisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The frame type for this logical board." + ::= { nwhrIfEntry 2 } + + nwhrIfLogicalBoardName OBJECT-TYPE + SYNTAX InternationalDisplayString (SIZE(0..18)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The name assigned to this logical board." + ::= { nwhrIfEntry 3 } + END |