diff options
Diffstat (limited to 'MIBS/INTEGRATED-SERVICES-MIB')
| -rw-r--r-- | MIBS/INTEGRATED-SERVICES-MIB | 790 |
1 files changed, 790 insertions, 0 deletions
diff --git a/MIBS/INTEGRATED-SERVICES-MIB b/MIBS/INTEGRATED-SERVICES-MIB new file mode 100644 index 0000000..9ddcddd --- /dev/null +++ b/MIBS/INTEGRATED-SERVICES-MIB @@ -0,0 +1,790 @@ +INTEGRATED-SERVICES-MIB DEFINITIONS ::= BEGIN + + IMPORTS + MODULE-IDENTITY, OBJECT-TYPE, Counter32, + Gauge32, Integer32, mib-2 FROM SNMPv2-SMI + TimeInterval, TEXTUAL-CONVENTION, RowStatus, + TruthValue, TestAndIncr FROM SNMPv2-TC + MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF + ifIndex, InterfaceIndex FROM IF-MIB; + +-- This MIB module uses the extended OBJECT-TYPE macro as +-- defined in [9]. + +intSrv MODULE-IDENTITY + LAST-UPDATED "9511030500Z" -- Thu Aug 28 09:04:13 PDT 1997 + ORGANIZATION "IETF Integrated Services Working Group" + CONTACT-INFO + " Fred Baker + Postal: Cisco Systems + 519 Lado Drive + Santa Barbara, California 93111 + Tel: +1 805 681 0115 + E-Mail: fred@cisco.com + + John Krawczyk + Postal: ArrowPoint Communications + 235 Littleton Road + Westford, Massachusetts 01886 + Tel: +1 508 692 5875 + E-Mail: jjk@tiac.net" + DESCRIPTION + "The MIB module to describe the Integrated Services + Protocol" + ::= { mib-2 52 } + +intSrvObjects OBJECT IDENTIFIER ::= { intSrv 1 } +intSrvGenObjects OBJECT IDENTIFIER ::= { intSrv 2 } +intSrvNotifications OBJECT IDENTIFIER ::= { intSrv 3 } +intSrvConformance OBJECT IDENTIFIER ::= { intSrv 4 } + +-- Textual Conventions +-- + + SessionNumber ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The Session Number convention is used for + numbers identifying sessions or saved PATH or + RESV information. It is a number in the range + returned by a TestAndIncr variable, having no + protocol meaning whatsoever but serving instead + as simple identifier. + + The alternative was a very complex instance or + instance object that became unwieldy." + SYNTAX INTEGER (0..2147483647) + + + Protocol ::= TEXTUAL-CONVENTION + DISPLAY-HINT "d" + STATUS current + DESCRIPTION + "The value of the IP Protocol field of an IP + Datagram Header. This identifies the protocol + layer above IP. For example, the value 6 is + used for TCP and the value 17 is used for UDP. + The values of this field are defined in the As- + signed Numbers RFC." + SYNTAX INTEGER (1..255) + + + SessionType ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The value of the C-Type field of a Session ob- + ject, as defined in the RSVP specification. + This value determines the lengths of octet + strings and use of certain objects such as the + 'port' variables. If the C-Type calls for an + IP6 address, one would expect all source, des- + tination, and next/previous hop addresses to be + 16 bytes long, and for the ports to be UDP/TCP + port numbers, for example." + SYNTAX INTEGER (1..255) + + Port ::= TEXTUAL-CONVENTION + -- DISPLAY-HINT "d" ---- illegal for OCTET STRING. + STATUS current + DESCRIPTION + "The value of the UDP or TCP Source or Destina- + tion Port field, a virtual destination port or + generalized port identifier used with the IPSEC + Authentication Header or Encapsulating Security + Payload, or other session discriminator. If it + is not used, the value should be of length 0. + This pair, when coupled with the IP Addresses + of the source and destination system and the IP + protocol field, uniquely identifies a data + stream." + SYNTAX OCTET STRING (SIZE(2..4)) + + + MessageSize ::= TEXTUAL-CONVENTION + DISPLAY-HINT "d" + STATUS current + DESCRIPTION + "The size of a message in bytes. This is used + to specify the minimum and maximum size of a + message along an integrated services route." + SYNTAX INTEGER (0..'7FFFFFFF'h) + + + BitRate ::= TEXTUAL-CONVENTION + DISPLAY-HINT "d" + STATUS current + DESCRIPTION + "The rate, in bits/second, that data may move + in the context. Applicable contexts minimally + include the speed of an interface or virtual + circuit, the data rate of a (potentially aggre- + gated) data flow, or the data rate to be allo- + cated for use by a flow." + SYNTAX INTEGER (0..'7FFFFFFF'h) + + BurstSize ::= TEXTUAL-CONVENTION + DISPLAY-HINT "d" + STATUS current + DESCRIPTION + "The number of octets of IP Data, including IP + Headers, that a stream may send without concern + for policing." + SYNTAX INTEGER (0..'7FFFFFFF'h) + + + QosService ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The class of service in use by a flow." + SYNTAX INTEGER { + bestEffort (1), -- Best Effort Service + guaranteedDelay (2), -- Guaranteed Delay + controlledLoad (5) -- Controlled Load + } + +-- The Integrated Services Interface Attributes Database contains +-- information about resources allocated by resource reservation +-- protocols, such as RSVP and ST-II. + + + intSrvIfAttribTable OBJECT-TYPE + SYNTAX SEQUENCE OF IntSrvIfAttribEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The reservable attributes of the system's in- + terfaces." + ::= { intSrvObjects 1 } + + + intSrvIfAttribEntry OBJECT-TYPE + SYNTAX IntSrvIfAttribEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The reservable attributes of a given inter- + face." + INDEX { ifIndex } + ::= { intSrvIfAttribTable 1 } + +IntSrvIfAttribEntry ::= + SEQUENCE { + intSrvIfAttribAllocatedBits BitRate, + intSrvIfAttribMaxAllocatedBits BitRate, + intSrvIfAttribAllocatedBuffer BurstSize, + intSrvIfAttribFlows Gauge32, + intSrvIfAttribPropagationDelay Integer32, + intSrvIfAttribStatus RowStatus + } + + intSrvIfAttribAllocatedBits OBJECT-TYPE + SYNTAX BitRate + UNITS "Bits per second" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of bits/second currently allocated + to reserved sessions on the interface." + ::= { intSrvIfAttribEntry 1 } + + intSrvIfAttribMaxAllocatedBits OBJECT-TYPE + SYNTAX BitRate + UNITS "Bits per second" + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The maximum number of bits/second that may be + allocated to reserved sessions on the inter- + face." + ::= { intSrvIfAttribEntry 2 } + + + intSrvIfAttribAllocatedBuffer OBJECT-TYPE + SYNTAX BurstSize + UNITS "Bytes" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The amount of buffer space required to hold + the simultaneous burst of all reserved flows on + the interface." + ::= { intSrvIfAttribEntry 3 } + + + intSrvIfAttribFlows OBJECT-TYPE + SYNTAX Gauge32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of reserved flows currently active + on this interface. A flow can be created ei- + ther from a reservation protocol (such as RSVP + or ST-II) or via configuration information." + ::= { intSrvIfAttribEntry 4 } + + intSrvIfAttribPropagationDelay OBJECT-TYPE + SYNTAX Integer32 + UNITS "microseconds" + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The amount of propagation delay that this in- + terface introduces in addition to that intro- + diced by bit propagation delays." + DEFVAL { 0 }-- by default, interfaces are presumed to add + -- no extra delays + ::= { intSrvIfAttribEntry 5 } + + + intSrvIfAttribStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "'active' on interfaces that are configured for + RSVP." + ::= { intSrvIfAttribEntry 6 } + + +-- The Integrated Services Active Flows Database +-- lists all flows active on an outgoing interface, including +-- relevant attributes. + + + intSrvFlowTable OBJECT-TYPE + SYNTAX SEQUENCE OF IntSrvFlowEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Information describing the reserved flows us- + ing the system's interfaces." + ::= { intSrvObjects 2 } + + + intSrvFlowEntry OBJECT-TYPE + SYNTAX IntSrvFlowEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Information describing the use of a given in- + terface by a given flow. The counter + intSrvFlowPoliced starts counting at the in- + stallation of the flow." + INDEX { intSrvFlowNumber } + ::= { intSrvFlowTable 1 } + + + IntSrvFlowEntry ::= + SEQUENCE { + intSrvFlowNumber SessionNumber, + intSrvFlowType SessionType, + intSrvFlowOwner INTEGER, + intSrvFlowDestAddr OCTET STRING, + intSrvFlowSenderAddr OCTET STRING, + intSrvFlowDestAddrLength INTEGER, + intSrvFlowSenderAddrLength INTEGER, + intSrvFlowProtocol Protocol, + intSrvFlowDestPort Port, + intSrvFlowPort Port, + intSrvFlowFlowId INTEGER, + intSrvFlowInterface InterfaceIndex, + intSrvFlowIfAddr OCTET STRING, + intSrvFlowRate BitRate, + intSrvFlowBurst BurstSize, + intSrvFlowWeight Integer32, + intSrvFlowQueue Integer32, + intSrvFlowMinTU MessageSize, + intSrvFlowMaxTU MessageSize, + intSrvFlowBestEffort Counter32, + intSrvFlowPoliced Counter32, + intSrvFlowDiscard TruthValue, + intSrvFlowService QosService, + intSrvFlowOrder INTEGER, + intSrvFlowStatus RowStatus + } + + + intSrvFlowNumber OBJECT-TYPE + SYNTAX SessionNumber + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The number of this flow. This is for SNMP In- + dexing purposes only and has no relation to any + protocol value." + ::= { intSrvFlowEntry 1 } + + + intSrvFlowType OBJECT-TYPE + SYNTAX SessionType + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The type of session (IP4, IP6, IP6 with flow + information, etc)." + ::= { intSrvFlowEntry 2 } + + + intSrvFlowOwner OBJECT-TYPE + SYNTAX INTEGER { + other(1), + rsvp(2), + management(3) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The process that installed this flow in the + queue policy database." + ::= { intSrvFlowEntry 3 } + + + intSrvFlowDestAddr OBJECT-TYPE + SYNTAX OCTET STRING (SIZE(4..16)) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The destination address used by all senders in + this session. This object may not be changed + when the value of the RowStatus object is 'ac- + tive'." + ::= { intSrvFlowEntry 4 } + + + intSrvFlowSenderAddr OBJECT-TYPE + SYNTAX OCTET STRING (SIZE(4..16)) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The source address of the sender selected by + this reservation. The value of all zeroes in- + dicates 'all senders'. This object may not be + changed when the value of the RowStatus object + is 'active'." + ::= { intSrvFlowEntry 5 } + + + intSrvFlowDestAddrLength OBJECT-TYPE + SYNTAX INTEGER(0..128) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The length of the destination address in bits. + This is the CIDR Prefix Length, which for IP4 + hosts and multicast addresses is 32 bits. This + object may not be changed when the value of the + RowStatus object is 'active'." + ::= { intSrvFlowEntry 6 } + + + intSrvFlowSenderAddrLength OBJECT-TYPE + SYNTAX INTEGER(0..128) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The length of the sender's address in bits. + This is the CIDR Prefix Length, which for IP4 + hosts and multicast addresses is 32 bits. This + object may not be changed when the value of the + RowStatus object is 'active'." + ::= { intSrvFlowEntry 7 } + + + intSrvFlowProtocol OBJECT-TYPE + SYNTAX Protocol + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The IP Protocol used by a session. This ob- + ject may not be changed when the value of the + RowStatus object is 'active'." + ::= { intSrvFlowEntry 8 } + + + intSrvFlowDestPort OBJECT-TYPE + SYNTAX Port + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The UDP or TCP port number used as a destina- + tion port for all senders in this session. If + the IP protocol in use, specified by + intSrvResvFwdProtocol, is 50 (ESP) or 51 (AH), + this represents a virtual destination port + number. A value of zero indicates that the IP + protocol in use does not have ports. This ob- + ject may not be changed when the value of the + RowStatus object is 'active'." + ::= { intSrvFlowEntry 9 } + + + intSrvFlowPort OBJECT-TYPE + SYNTAX Port + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The UDP or TCP port number used as a source + port for this sender in this session. If the + IP protocol in use, specified by + intSrvResvFwdProtocol is 50 (ESP) or 51 (AH), + this represents a generalized port identifier + (GPI). A value of zero indicates that the IP + protocol in use does not have ports. This ob- + ject may not be changed when the value of the + RowStatus object is 'active'." + ::= { intSrvFlowEntry 10 } + + + intSrvFlowFlowId OBJECT-TYPE + SYNTAX INTEGER (0..16777215) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The flow ID that this sender is using, if + this is an IPv6 session." + ::= { intSrvFlowEntry 11 } + + + intSrvFlowInterface OBJECT-TYPE + SYNTAX InterfaceIndex + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The ifIndex value of the interface on which + this reservation exists." + ::= { intSrvFlowEntry 12 } + + + intSrvFlowIfAddr OBJECT-TYPE + SYNTAX OCTET STRING (SIZE(4..16)) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The IP Address on the ifEntry on which this + reservation exists. This is present primarily + to support those interfaces which layer multi- + ple IP Addresses on the interface." + ::= { intSrvFlowEntry 13 } + + + intSrvFlowRate OBJECT-TYPE + SYNTAX BitRate + UNITS "bits per second" + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The Reserved Rate of the sender's data stream. + If this is a Controlled Load service flow, this + rate is derived from the Tspec rate parameter + (r). If this is a Guaranteed service flow, + this rate is derived from the Rspec clearing + rate parameter (R)." + ::= { intSrvFlowEntry 14 } + + + intSrvFlowBurst OBJECT-TYPE + SYNTAX BurstSize + UNITS "bytes" + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The size of the largest burst expected from + the sender at a time. + + If this is less than the sender's advertised + burst size, the receiver is asking the network + to provide flow pacing beyond what would be + provided under normal circumstances. Such pac- + ing is at the network's option." + ::= { intSrvFlowEntry 15 } + + + intSrvFlowWeight OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The weight used to prioritize the traffic. + Note that the interpretation of this object is + implementation-specific, as implementations + vary in their use of weighting procedures." + ::= { intSrvFlowEntry 16 } + + intSrvFlowQueue OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The number of the queue used by this traffic. + Note that the interpretation of this object is + implementation-specific, as implementations + vary in their use of queue identifiers." + ::= { intSrvFlowEntry 17 } + + + intSrvFlowMinTU OBJECT-TYPE + SYNTAX MessageSize + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The minimum message size for this flow. The + policing algorithm will treat smaller messages + as though they are this size." + ::= { intSrvFlowEntry 18 } + + + intSrvFlowMaxTU OBJECT-TYPE + SYNTAX MessageSize + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The maximum datagram size for this flow that + will conform to the traffic specification. This + value cannot exceed the MTU of the interface." + ::= { intSrvFlowEntry 19 } + + + intSrvFlowBestEffort OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of packets that were remanded to + best effort service." + ::= { intSrvFlowEntry 20 } + + + intSrvFlowPoliced OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of packets policed since the incep- + tion of the flow's service." + ::= { intSrvFlowEntry 21 } + + + intSrvFlowDiscard OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "If 'true', the flow is to incur loss when + traffic is policed. If 'false', policed traff- + ic is treated as best effort traffic." + DEFVAL { false } -- traffic is, by default, treated as best + -- effort + ::= { intSrvFlowEntry 22 } + + + intSrvFlowService OBJECT-TYPE + SYNTAX QosService + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The QoS service being applied to this flow." + ::= { intSrvFlowEntry 23 } + + + intSrvFlowOrder OBJECT-TYPE + SYNTAX INTEGER (0..65535) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "In the event of ambiguity, the order in which + the classifier should make its comparisons. + The row with intSrvFlowOrder=0 is tried first, + and comparisons proceed in the order of in- + creasing value. Non-serial implementations of + the classifier should emulate this behavior." + ::= { intSrvFlowEntry 24 } + + + intSrvFlowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "'active' for all active flows. This object + may be used to install static classifier infor- + mation, delete classifier information, or au- + thorize such." + ::= { intSrvFlowEntry 25 } + + + intSrvFlowNewIndex OBJECT-TYPE + SYNTAX TestAndIncr + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object is used to assign values to + intSrvFlowNumber as described in 'Textual Con- + ventions for SNMPv2'. The network manager + reads the object, and then writes the value + back in the SET that creates a new instance of + intSrvFlowEntry. If the SET fails with the + code 'inconsistentValue', then the process must + be repeated; If the SET succeeds, then the ob- + ject is incremented, and the new instance is + created according to the manager's directions." + ::= { intSrvGenObjects 1 } + + +-- conformance information + + +intSrvGroups OBJECT IDENTIFIER ::= { intSrvConformance 1 } +intSrvCompliances OBJECT IDENTIFIER ::= { intSrvConformance 2 } + +-- compliance statements + + + intSrvCompliance MODULE-COMPLIANCE + STATUS current + DESCRIPTION + "The compliance statement " + MODULE -- this module + MANDATORY-GROUPS { intSrvIfAttribGroup, intSrvFlowsGroup } + + OBJECT intSrvFlowType + MIN-ACCESS read-only + DESCRIPTION + "read-create access is not required. This may be + read-only." + + OBJECT intSrvFlowOwner + MIN-ACCESS read-only + DESCRIPTION + "read-create access is not required. This may be + read-only." + + OBJECT intSrvFlowDestAddr + MIN-ACCESS read-only + DESCRIPTION + "read-create access is not required. This may be + read-only." + + OBJECT intSrvFlowSenderAddr + MIN-ACCESS read-only + DESCRIPTION + "read-create access is not required. This may be + read-only." + + OBJECT intSrvFlowDestAddrLength + MIN-ACCESS read-only + DESCRIPTION + "read-create access is not required. This may be + read-only." + + OBJECT intSrvFlowSenderAddrLength + MIN-ACCESS read-only + DESCRIPTION + "read-create access is not required. This may be + read-only." + + OBJECT intSrvFlowProtocol + MIN-ACCESS read-only + DESCRIPTION + "read-create access is not required. This may be + read-only." + + OBJECT intSrvFlowDestPort + MIN-ACCESS read-only + DESCRIPTION + "read-create access is not required. This may be + read-only." + + OBJECT intSrvFlowPort + MIN-ACCESS read-only + DESCRIPTION + "read-create access is not required. This may be + read-only." + + OBJECT intSrvFlowFlowId + MIN-ACCESS not-accessible + DESCRIPTION + "This object is needed only in a system that imple- + ments IPv6." + + OBJECT intSrvFlowInterface + MIN-ACCESS read-only + DESCRIPTION + "read-create access is not required. This may be + read-only." + + OBJECT intSrvFlowRate + MIN-ACCESS read-only + DESCRIPTION + "read-create access is not required. This may be + read-only." + + OBJECT intSrvFlowBurst + MIN-ACCESS read-only + DESCRIPTION + "read-create access is not required. This may be + read-only." + + OBJECT intSrvFlowWeight + MIN-ACCESS read-only + DESCRIPTION + "read-create access is not required. This may be + read-only." + + OBJECT intSrvFlowQueue + MIN-ACCESS read-only + DESCRIPTION + "read-create access is not required. This may be + read-only." + + OBJECT intSrvFlowMinTU + MIN-ACCESS read-only + DESCRIPTION + "read-create access is not required. This may be + read-only." + + OBJECT intSrvFlowMaxTU + MIN-ACCESS read-only + DESCRIPTION + "read-create access is not required. This may be + read-only." + + OBJECT intSrvFlowStatus + MIN-ACCESS read-only + DESCRIPTION + "read-create access is not required. This may be + read-only." + + ::= { intSrvCompliances 1 } + + + intSrvIfAttribGroup OBJECT-GROUP + OBJECTS { + intSrvIfAttribAllocatedBits, intSrvIfAttribMaxAllocatedBits, + intSrvIfAttribAllocatedBuffer, intSrvIfAttribFlows, + intSrvIfAttribPropagationDelay, intSrvIfAttribStatus + } + STATUS current + DESCRIPTION + "These objects are required for Systems sup- + porting the Integrated Services Architecture." + ::= { intSrvGroups 1 } + + intSrvFlowsGroup OBJECT-GROUP + OBJECTS { + intSrvFlowType, intSrvFlowOwner, intSrvFlowDestAddr, + intSrvFlowSenderAddr, intSrvFlowDestAddrLength, + intSrvFlowSenderAddrLength, intSrvFlowProtocol, + intSrvFlowDestPort, intSrvFlowPort, intSrvFlowInterface, + intSrvFlowBestEffort, intSrvFlowRate, intSrvFlowBurst, + intSrvFlowWeight, intSrvFlowQueue, intSrvFlowMinTU, + intSrvFlowDiscard, intSrvFlowPoliced, intSrvFlowService, + intSrvFlowIfAddr, intSrvFlowOrder, intSrvFlowStatus, + intSrvFlowFlowId, intSrvFlowMaxTU + } + STATUS current + DESCRIPTION + "These objects are required for Systems sup- + porting the Integrated Services Architecture." + ::= { intSrvGroups 2 } + +END |