diff options
Diffstat (limited to 'MIBS/4rf')
| -rw-r--r-- | MIBS/4rf/4RF-APRISAXE-EVENTS | 770 | ||||
| -rw-r--r-- | MIBS/4rf/4RF-APRISAXE-MIB | 10023 | ||||
| -rw-r--r-- | MIBS/4rf/4RF-APRISAXE-TC | 1116 | ||||
| -rw-r--r-- | MIBS/4rf/4RF-COMMON-MIB | 708 | ||||
| -rw-r--r-- | MIBS/4rf/4RF-COMMON-TC | 448 | ||||
| -rw-r--r-- | MIBS/4rf/4RF-MIB | 104 | ||||
| -rw-r--r-- | MIBS/4rf/4RF-PRODUCTS-MIB | 84 |
7 files changed, 13253 insertions, 0 deletions
diff --git a/MIBS/4rf/4RF-APRISAXE-EVENTS b/MIBS/4rf/4RF-APRISAXE-EVENTS new file mode 100644 index 0000000..95af844 --- /dev/null +++ b/MIBS/4rf/4RF-APRISAXE-EVENTS @@ -0,0 +1,770 @@ +APRISAXE-EVENTS-4RF DEFINITIONS ::= BEGIN + +-- +-- File: $Id: 4RF-APRISAXE-EVENTS.txt,v 1.40 2007/07/20 02:50:01 ma Exp $ +-- +-- Copyright: 2004 4RF COMMUNICATIONS LTD +-- +-- Description: +-- Event MIB for AprisaXE project, the values in this file are not accessible +-- except as notifications. +-- +-- Versions: +-- +-- Release 3 +-- Added support for 4-wire cards and configurable cross-connections +-- +-- Notes: +-- None +-- + + +IMPORTS + + -- Standard imports + MODULE-IDENTITY, OBJECT-TYPE, OBJECT-IDENTITY, NOTIFICATION-TYPE, + Integer32, Unsigned32, Counter32, IpAddress + FROM SNMPv2-SMI + TEXTUAL-CONVENTION, DisplayString + FROM SNMPv2-TC + MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP + FROM SNMPv2-CONF + + -- 4RF Specific imports + fourRFAprisaXE + FROM PRODUCTS-MIB-4RF + FourRFAlarmStatus, FourRFAlarmSeverity, FourRFAlarmEnabled, FourRFAlarmPresent, + FourRFImageVersion, FourRFHardwareVersion + FROM COMMON-TC-4RF + AprisaXEAlarmType, AprisaXECardType, AprisaXESlotNumber, + AprisaXEDataStatus, AprisaXEPortNumber + FROM APRISAXE-TC-4RF + aprisaXEObjects, aprisaXEEvents + FROM APRISAXE-MIB-4RF + fourRFModules + FROM MIB-4RF; + + +-- Module Identification +aprisaXE4RFEventModule MODULE-IDENTITY + LAST-UPDATED "200704300000Z" + ORGANIZATION "www.4rf.com" + CONTACT-INFO + "postal: 4RF Communications Ltd + 26 Glover Street + Ngauranga + PO Box 13-506 + Wellington 6032 + New Zealand + + phone: +64 4 499 6000 + email: support@4rf.com" + DESCRIPTION "Event MIB for the AprisaXE project" + + -- Revision history + -- (in reverse chronological order) + + REVISION "200704300000Z" + DESCRIPTION "Second draft" + + REVISION "200411300334Z" + DESCRIPTION "First draft" + ::= { fourRFModules 7 } + + +-- Trap Values + +aprisaXEEventValues OBJECT IDENTIFIER ::= { aprisaXEObjects 1000 } + + +-- Alarm event values + +aprisaXEEventAlarmStatus OBJECT-TYPE + SYNTAX FourRFAlarmPresent + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION "The status of an alarm event." + ::= { aprisaXEEventValues 1 } + +aprisaXEEventAlarmSeverity OBJECT-TYPE + SYNTAX FourRFAlarmSeverity + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION "The severity of the alarm." + ::= { aprisaXEEventValues 2 } + +aprisaXEEventAlarmValue OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION "Indicatesthe current value." + ::= { aprisaXEEventValues 3 } + +aprisaXEEventAlarmThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION "Indicates the level at which the alarm was set." + ::= { aprisaXEEventValues 4 } + +aprisaXEEventAlarmType OBJECT-TYPE + SYNTAX AprisaXEAlarmType + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION "The alarm type." + ::= { aprisaXEEventValues 5 } + + +-- Card mismatch event values + +aprisaXEEventCardExpected OBJECT-TYPE + SYNTAX AprisaXECardType + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION "The type of MUX card expected in a slot." + ::= { aprisaXEEventValues 6 } + +aprisaXEEventCardInstalled OBJECT-TYPE + SYNTAX AprisaXECardType + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION "The type of MUX card found in a slot." + ::= { aprisaXEEventValues 7 } + +aprisaXEEventCardSlot OBJECT-TYPE + SYNTAX AprisaXESlotNumber + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION "The slot containing the unexpected card." + ::= { aprisaXEEventValues 8 } + +aprisaXEEventCardStatus OBJECT-TYPE + SYNTAX FourRFAlarmPresent + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION "Indicates whether the alarm is present or has been cleared." + ::= { aprisaXEEventValues 9 } + +aprisaXEEventCardPort OBJECT-TYPE + SYNTAX AprisaXEPortNumber + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION "The port reporting the event." + ::= { aprisaXEEventValues 10 } + + +-- Characterisation Data Status + +aprisaXEEventCharacterisationStatus OBJECT-TYPE + SYNTAX AprisaXEDataStatus + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION "Indicates whether the characterisation is valid or invalid." + ::= { aprisaXEEventValues 15 } + + +-- MIB Data Status + +aprisaXEEventMibStatus OBJECT-TYPE + SYNTAX AprisaXEDataStatus + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION "Indicates whether the MIB is valid or invalid." + ::= { aprisaXEEventValues 16 } + + +-- *************************************************************************** +-- Traps +-- *************************************************************************** + +aprisaXELinkAlarmsEvents OBJECT-IDENTITY + STATUS current + DESCRIPTION "The events for the link alarms." + ::= { aprisaXEEvents 1 } + +aprisaXELinkAlarmsEventsV2 OBJECT-IDENTITY + STATUS current + DESCRIPTION "The SNMPv2 events for the link alarms." + ::= { aprisaXELinkAlarmsEvents 0 } + +aprisaXEThresholdAlarmEvent NOTIFICATION-TYPE + OBJECTS { aprisaXEEventAlarmStatus, + aprisaXEEventAlarmSeverity, + aprisaXEEventAlarmValue, + aprisaXEEventAlarmThreshold, + aprisaXEEventAlarmType + } + STATUS current + DESCRIPTION "Event indicating a change in state of a threshold alarm. + It will be sent whenever the status of the alarm changes from + noAlarm to alarmPresent and vice versa." + ::= { aprisaXELinkAlarmsEventsV2 1 } + + +-- *************************************************************************** +-- Receiver Traps +-- *************************************************************************** + +aprisaXERxSynthOutOfLockAlarmEvent NOTIFICATION-TYPE + OBJECTS { aprisaXEEventAlarmStatus } + STATUS current + DESCRIPTION "Event indicating a change in state of the Rx synthesizer out of lock alarm. + It will be sent whenever the status of the alarm changes from + noAlarm to alarmPresent and vice versa." + ::= { aprisaXELinkAlarmsEventsV2 10 } + +aprisaXEAlarmRxCDataEvent NOTIFICATION-TYPE + OBJECTS { aprisaXEEventCharacterisationStatus } + STATUS current + DESCRIPTION "Event indicating a change in state of the receiver + characterisation data alarm." + ::= { aprisaXELinkAlarmsEventsV2 11 } + +aprisaXEAlarmRx12VStatusEvent NOTIFICATION-TYPE + OBJECTS { aprisaXEEventAlarmStatus } + STATUS current + DESCRIPTION "Event indicating a change in state of the Rx synthesizer out of lock alarm. + It will be sent whenever the status of the alarm changes from + noAlarm to alarmPresent and vice versa." + ::= { aprisaXELinkAlarmsEventsV2 12 } + +aprisaXEAlarmRxOffEvent NOTIFICATION-TYPE + OBJECTS { aprisaXEEventAlarmStatus } + STATUS current + DESCRIPTION "Event indicating a change in state of receiver, when it is + turned on or off. + It will be sent whenever the status of the alarm changes from + noAlarm to alarmPresent and vice versa." + ::= { aprisaXELinkAlarmsEventsV2 13 } + +aprisaXEAlarmRxBadMibEvent NOTIFICATION-TYPE + OBJECTS { aprisaXEEventMibStatus } + STATUS current + DESCRIPTION "Event indicating a change in state of the receiver + MIB data alarm." + ::= { aprisaXELinkAlarmsEventsV2 14 } + + +-- *************************************************************************** +-- Transmitter Traps +-- *************************************************************************** + +aprisaXEAlarmTxCDataEvent NOTIFICATION-TYPE + OBJECTS { aprisaXEEventCharacterisationStatus } + STATUS current + DESCRIPTION "Event indicating a change in state of the transmitter + characterisation data alarm." + ::= { aprisaXELinkAlarmsEventsV2 20 } + +aprisaXEAlarmTxSynthOutOfLockEvent NOTIFICATION-TYPE + OBJECTS { aprisaXEEventAlarmStatus } + STATUS current + DESCRIPTION "Event indicating a change in state of the transmitter + synthesiser out of lock alarm." + ::= { aprisaXELinkAlarmsEventsV2 21 } + +aprisaXEAlarmTx28VStatusEvent NOTIFICATION-TYPE + OBJECTS { aprisaXEEventAlarmStatus } + STATUS current + DESCRIPTION "Event indicating a change in state of the transmitter + 28V supply status alarm." + ::= { aprisaXELinkAlarmsEventsV2 22 } + +aprisaXEAlarmTx11VStatusEvent NOTIFICATION-TYPE + OBJECTS { aprisaXEEventAlarmStatus } + STATUS current + DESCRIPTION "Event indicating a change in state of the transmitter + 11V supply status alarm." + ::= { aprisaXELinkAlarmsEventsV2 23 } + +aprisaXEAlarmTx5VStatusEvent NOTIFICATION-TYPE + OBJECTS { aprisaXEEventAlarmStatus } + STATUS current + DESCRIPTION "Event indicating a change in state of the transmitter + 5V digital supply status alarm." + ::= { aprisaXELinkAlarmsEventsV2 24 } + +aprisaXEAlarmTxAmplifierBalanceEvent NOTIFICATION-TYPE + OBJECTS { aprisaXEEventAlarmStatus } + STATUS current + DESCRIPTION "Event indicating a change in state of the transmitter + amplifier balance status alarm." + ::= { aprisaXELinkAlarmsEventsV2 25 } + +aprisaXEAlarmTxBadMibEvent NOTIFICATION-TYPE + OBJECTS { aprisaXEEventMibStatus } + STATUS current + DESCRIPTION "Event indicating a change in state of the transmitter + MIB data alarm." + ::= { aprisaXELinkAlarmsEventsV2 26 } + +aprisaXEAlarmTxNeg5VStatusEvent NOTIFICATION-TYPE + OBJECTS { aprisaXEEventAlarmStatus } + STATUS current + DESCRIPTION "Event indicating a change in state of the transmitter + Negative 5V digital supply status alarm." + ::= { aprisaXELinkAlarmsEventsV2 27 } + + +-- *************************************************************************** +-- Modem Traps +-- *************************************************************************** + +aprisaXEModemSyncEvent NOTIFICATION-TYPE + OBJECTS { aprisaXEEventAlarmStatus } + STATUS current + DESCRIPTION "Event indicating a change in state of the modem lock." + ::= { aprisaXELinkAlarmsEventsV2 30 } + +aprisaXEModemTDMAlignmentEvent NOTIFICATION-TYPE + OBJECTS { aprisaXEEventAlarmStatus } + STATUS current + DESCRIPTION "Event indicating a change in state of the modem TDM alignment." + ::= { aprisaXELinkAlarmsEventsV2 31 } + +aprisaXEModemDemodAlignmentEvent NOTIFICATION-TYPE + OBJECTS { aprisaXEEventAlarmStatus } + STATUS current + DESCRIPTION "Event indicating a change in state of the modem demodulator alignment." + ::= { aprisaXELinkAlarmsEventsV2 32 } + +aprisaXEModemRefAStatusEvent NOTIFICATION-TYPE + OBJECTS { aprisaXEEventAlarmStatus } + STATUS current + DESCRIPTION "Event indicating a change in state of the Ref A clock." + ::= { aprisaXELinkAlarmsEventsV2 33 } + +aprisaXEModemRefBStatusEvent NOTIFICATION-TYPE + OBJECTS { aprisaXEEventAlarmStatus } + STATUS current + DESCRIPTION "Event indicating a change in state of the Ref B clock." + ::= { aprisaXELinkAlarmsEventsV2 34 } + +aprisaXEModemUCEPresentEvent NOTIFICATION-TYPE + OBJECTS { aprisaXEEventAlarmStatus } + STATUS current + DESCRIPTION "Event indicating the presence of uncorrectable errors." + ::= { aprisaXELinkAlarmsEventsV2 35 } + + +-- *************************************************************************** +-- QuadE1 Traps +-- *************************************************************************** + +aprisaXEQuadE1LOSEvent NOTIFICATION-TYPE + OBJECTS { aprisaXEEventCardSlot, + aprisaXEEventCardPort, + aprisaXEEventAlarmStatus + } + STATUS current + DESCRIPTION "Event indicating a change in LOS state for a port." + ::= { aprisaXELinkAlarmsEventsV2 40 } + +aprisaXEQuadE1AISEvent NOTIFICATION-TYPE + OBJECTS { aprisaXEEventCardSlot, + aprisaXEEventCardPort, + aprisaXEEventAlarmStatus + } + STATUS current + DESCRIPTION "Event indicating a change in AIS state for a port." + ::= { aprisaXELinkAlarmsEventsV2 41 } + +aprisaXEQuadE1RAIEvent NOTIFICATION-TYPE + OBJECTS { aprisaXEEventCardSlot, + aprisaXEEventCardPort, + aprisaXEEventAlarmStatus + } + STATUS current + DESCRIPTION "Event indicating a change in RAI state for a port." + ::= { aprisaXELinkAlarmsEventsV2 42 } + +aprisaXEQuadE1RMAIEvent NOTIFICATION-TYPE + OBJECTS { aprisaXEEventCardSlot, + aprisaXEEventCardPort, + aprisaXEEventAlarmStatus + } + STATUS current + DESCRIPTION "Event indicating a change in RMAI state for a port." + ::= { aprisaXELinkAlarmsEventsV2 43 } + +aprisaXEQuadE1TS16AISEvent NOTIFICATION-TYPE + OBJECTS { aprisaXEEventCardSlot, + aprisaXEEventCardPort, + aprisaXEEventAlarmStatus + } + STATUS current + DESCRIPTION "Event indicating a change in TS16AIS state for a port." + ::= { aprisaXELinkAlarmsEventsV2 44 } + +aprisaXEQuadE1TS16LOSEvent NOTIFICATION-TYPE + OBJECTS { aprisaXEEventCardSlot, + aprisaXEEventCardPort, + aprisaXEEventAlarmStatus + } + STATUS current + DESCRIPTION "Event indicating a change in TS16LOS state for a port." + ::= { aprisaXELinkAlarmsEventsV2 45 } + +aprisaXEQuadE1LOFEvent NOTIFICATION-TYPE + OBJECTS { aprisaXEEventCardSlot, + aprisaXEEventCardPort, + aprisaXEEventAlarmStatus + } + STATUS current + DESCRIPTION "Event indicating a change in loss of frame state for a port." + ::= { aprisaXELinkAlarmsEventsV2 46 } + + +-- *************************************************************************** +-- FXO Traps +-- *************************************************************************** + +aprisaXEFXOCodecOvldEvent NOTIFICATION-TYPE + OBJECTS { aprisaXEEventCardSlot, + aprisaXEEventCardPort, + aprisaXEEventAlarmStatus + } + STATUS current + DESCRIPTION "Event indicating a change in Codec Ovld state for a port." + ::= { aprisaXELinkAlarmsEventsV2 50 } + +aprisaXEFXOBillToneOvldEvent NOTIFICATION-TYPE + OBJECTS { aprisaXEEventCardSlot, + aprisaXEEventCardPort, + aprisaXEEventAlarmStatus + } + STATUS current + DESCRIPTION "Event indicating a change in Billing Tone Ovld state for a port." + ::= { aprisaXELinkAlarmsEventsV2 51 } + +aprisaXEFXOCurrentOvldEvent NOTIFICATION-TYPE + OBJECTS { aprisaXEEventCardSlot, + aprisaXEEventCardPort, + aprisaXEEventAlarmStatus + } + STATUS current + DESCRIPTION "Event indicating a change in Current Ovld state for a port." + ::= { aprisaXELinkAlarmsEventsV2 52 } + +aprisaXEFXOUnplugEvent NOTIFICATION-TYPE + OBJECTS { aprisaXEEventCardSlot, + aprisaXEEventCardPort, + aprisaXEEventAlarmStatus + } + STATUS current + DESCRIPTION "Event indicating a change in Unplug state for a port." + ::= { aprisaXELinkAlarmsEventsV2 53 } + + +-- *************************************************************************** +-- FXS Traps +-- *************************************************************************** + +aprisaXEFXSCalibrateErrorEvent NOTIFICATION-TYPE + OBJECTS { aprisaXEEventCardSlot, + aprisaXEEventCardPort, + aprisaXEEventAlarmStatus + } + STATUS current + DESCRIPTION "Event indicating a common mode error during Pro-SLIC initialisation." + ::= { aprisaXELinkAlarmsEventsV2 60 } + +aprisaXEFXSDCDCErrorEvent NOTIFICATION-TYPE + OBJECTS { aprisaXEEventCardSlot, + aprisaXEEventCardPort, + aprisaXEEventAlarmStatus + } + STATUS obsolete + DESCRIPTION "Event indicating a DC-DC converter error during Pro-SLIC initialisation " + ::= { aprisaXELinkAlarmsEventsV2 61 } + +aprisaXEFXSCASLockEvent NOTIFICATION-TYPE + OBJECTS { aprisaXEEventCardSlot, + aprisaXEEventCardPort, + aprisaXEEventAlarmStatus + } + STATUS current + DESCRIPTION "Event indicating the FPGA has not locked onto a CAS frame. " + ::= { aprisaXELinkAlarmsEventsV2 62 } + + +-- *************************************************************************** +-- HSS Traps +-- *************************************************************************** + +aprisaXEHSSTDMLockEvent NOTIFICATION-TYPE + OBJECTS { aprisaXEEventCardSlot, + aprisaXEEventAlarmStatus + } + STATUS current + DESCRIPTION "Event indicating an HSS TDM Lock error." + ::= { aprisaXELinkAlarmsEventsV2 70 } + +aprisaXEHSS32MHzResetEvent NOTIFICATION-TYPE + OBJECTS { aprisaXEEventCardSlot, + aprisaXEEventAlarmStatus + } + STATUS current + DESCRIPTION "Event indicating a 32MHz clock reset error." + ::= { aprisaXELinkAlarmsEventsV2 71 } + +aprisaXEHSSTDMResetEvent NOTIFICATION-TYPE + OBJECTS { aprisaXEEventCardSlot, + aprisaXEEventAlarmStatus + } + STATUS current + DESCRIPTION "Event indicating a TDM reset error." + ::= { aprisaXELinkAlarmsEventsV2 72 } + +aprisaXEHSSPatternLossEvent NOTIFICATION-TYPE + OBJECTS { aprisaXEEventCardSlot, + aprisaXEEventAlarmStatus + } + STATUS current + DESCRIPTION "Event indicating a Pattern Loss error." + ::= { aprisaXELinkAlarmsEventsV2 73 } + +aprisaXEHSSRxFifoFullEvent NOTIFICATION-TYPE + OBJECTS { aprisaXEEventCardSlot, + aprisaXEEventAlarmStatus + } + STATUS current + DESCRIPTION "Event indicating an Rx FIFO Full error." + ::= { aprisaXELinkAlarmsEventsV2 74 } + +aprisaXEHSSRxFifoEmptyEvent NOTIFICATION-TYPE + OBJECTS { aprisaXEEventCardSlot, + aprisaXEEventAlarmStatus + } + STATUS current + DESCRIPTION "Event indicating an Rx FIFO Empty error." + ::= { aprisaXELinkAlarmsEventsV2 75 } + +aprisaXEHSSTxFifoFullEvent NOTIFICATION-TYPE + OBJECTS { aprisaXEEventCardSlot, + aprisaXEEventAlarmStatus + } + STATUS current + DESCRIPTION "Event indicating a Tx FIFO Full error." + ::= { aprisaXELinkAlarmsEventsV2 76 } + +aprisaXEHSSTxFifoEmptyEvent NOTIFICATION-TYPE + OBJECTS { aprisaXEEventCardSlot, + aprisaXEEventAlarmStatus + } + STATUS current + DESCRIPTION "Event indicating a Tx FIFO Empty error." + ::= { aprisaXELinkAlarmsEventsV2 77 } + +aprisaXEHSSRxClockValidEvent NOTIFICATION-TYPE + OBJECTS { aprisaXEEventCardSlot, + aprisaXEEventAlarmStatus + } + STATUS current + DESCRIPTION "Event indicating an Rx Clock Valid error." + ::= { aprisaXELinkAlarmsEventsV2 78 } + +aprisaXEHSSTxClockValidEvent NOTIFICATION-TYPE + OBJECTS { aprisaXEEventCardSlot, + aprisaXEEventAlarmStatus + } + STATUS current + DESCRIPTION "Event indicating a Tx Clock Valid error." + ::= { aprisaXELinkAlarmsEventsV2 79 } + + +-- *************************************************************************** +-- V24 Traps +-- *************************************************************************** + +aprisaXEV24ControlLineLossEvent NOTIFICATION-TYPE + OBJECTS { aprisaXEEventCardSlot, + aprisaXEEventCardPort, + aprisaXEEventAlarmStatus + } + STATUS current + DESCRIPTION "Event indicating V24 control line aren't in sync." + ::= { aprisaXELinkAlarmsEventsV2 80 } + + +-- *************************************************************************** +-- Other Traps +-- *************************************************************************** + +aprisaXEUnexpectedCardEvent NOTIFICATION-TYPE + OBJECTS { aprisaXEEventCardSlot, + aprisaXEEventCardExpected, + aprisaXEEventCardInstalled, + aprisaXEEventCardStatus + } + STATUS current + DESCRIPTION "Event indicating an mismatch between the MIB and the installed + MUX cards. The radio will not operate correctly if the MIB and + MUX cards do not match." + ::= { aprisaXELinkAlarmsEventsV2 100 } + +aprisaXECLKSyncEvent NOTIFICATION-TYPE + OBJECTS { aprisaXEEventAlarmStatus } + STATUS current + DESCRIPTION "Event indicating a change in state of the clock sync state." + ::= { aprisaXELinkAlarmsEventsV2 110 } + +aprisaXENetClkConfigEvent NOTIFICATION-TYPE + OBJECTS { aprisaXEEventAlarmStatus } + STATUS current + DESCRIPTION "Event indicating a change in state of the network clock config." + ::= { aprisaXELinkAlarmsEventsV2 111 } + +aprisaXECharacterisationEEFailEvent NOTIFICATION-TYPE + OBJECTS { aprisaXEEventCardSlot, + aprisaXEEventCardInstalled, + aprisaXEEventCharacterisationStatus + } + STATUS current + DESCRIPTION "Event indicating a failed read of characterisation data from + EEPROM." + ::= { aprisaXELinkAlarmsEventsV2 120 } + +aprisaXEMibEEFailEvent NOTIFICATION-TYPE + OBJECTS { aprisaXEEventCardSlot, + aprisaXEEventCardInstalled, + aprisaXEEventMibStatus + } + STATUS current + DESCRIPTION "Event indicating a failed read of mib data from EEPROM." + ::= { aprisaXELinkAlarmsEventsV2 121 } + +aprisaXEMhsbSwitchToStandbyEvent NOTIFICATION-TYPE + OBJECTS { aprisaXEEventAlarmStatus } + STATUS current + DESCRIPTION "Event indicating a Monitored Hot Standby switch to Standby Event." + ::= { aprisaXELinkAlarmsEventsV2 130 } + +aprisaXEAlternateImageTableEvent NOTIFICATION-TYPE + OBJECTS { aprisaXEEventAlarmStatus } + STATUS current + DESCRIPTION "Event indicating an Alternate Image Table Event." + ::= { aprisaXELinkAlarmsEventsV2 131 } + +aprisaXEDefaultImageTableEvent NOTIFICATION-TYPE + OBJECTS { aprisaXEEventAlarmStatus } + STATUS current + DESCRIPTION "Event indicating a Default Image Table Event." + ::= { aprisaXELinkAlarmsEventsV2 132 } + +aprisaXEUploadFailEvent NOTIFICATION-TYPE + OBJECTS { aprisaXEEventAlarmStatus } + STATUS current + DESCRIPTION "Event indicating the failure of the previous upload." + ::= { aprisaXELinkAlarmsEventsV2 133 } + + +-- *************************************************************************** +-- Psc Traps +-- *************************************************************************** + +aprisaXEPscDemuxAlignmentEvent NOTIFICATION-TYPE + OBJECTS { aprisaXEEventAlarmStatus } + STATUS current + DESCRIPTION "Event indicating a change in state of the PSC Demux alignment ." + ::= { aprisaXELinkAlarmsEventsV2 140 } + + +aprisaXEPscTDMAlignmentEvent NOTIFICATION-TYPE + OBJECTS { aprisaXEEventAlarmStatus } + STATUS current + DESCRIPTION "Event indicating a change in state of the PSC TDM alignment." + ::= { aprisaXELinkAlarmsEventsV2 141 } + +aprisaXEPscMuxAlignmentErrorEvent NOTIFICATION-TYPE + OBJECTS { aprisaXEEventAlarmStatus } + STATUS current + DESCRIPTION "Event indicating if the TDM mux loses alignment to the TDM bus." + ::= { aprisaXELinkAlarmsEventsV2 142 } + +aprisaXEPscCompanionTxFailEvent NOTIFICATION-TYPE + OBJECTS { aprisaXEEventAlarmStatus } + STATUS current + DESCRIPTION "Event indicating that the HRSD Companion transmitter has failed." + ::= { aprisaXELinkAlarmsEventsV2 143 } + +aprisaXEPscSoftwareOverrideEvent NOTIFICATION-TYPE + OBJECTS { aprisaXEEventAlarmStatus } + STATUS current + DESCRIPTION "Event indicating a software override of the PSC Mode Switch." + ::= { aprisaXELinkAlarmsEventsV2 144 } + +aprisaXEPscInvalidSwitchValueEvent NOTIFICATION-TYPE + OBJECTS { aprisaXEEventAlarmStatus } + STATUS current + DESCRIPTION "Event indicating that the PSC Mode Switch value is invalid." + ::= { aprisaXELinkAlarmsEventsV2 145 } + + +-- *************************************************************************** +-- DualE1 Traps +-- *************************************************************************** + +aprisaXEDualE1LOSEvent NOTIFICATION-TYPE + OBJECTS { aprisaXEEventCardSlot, + aprisaXEEventCardPort, + aprisaXEEventAlarmStatus + } + STATUS current + DESCRIPTION "Event indicating a change in LOS state for a port." + ::= { aprisaXELinkAlarmsEventsV2 150 } + +aprisaXEDualE1AISEvent NOTIFICATION-TYPE + OBJECTS { aprisaXEEventCardSlot, + aprisaXEEventCardPort, + aprisaXEEventAlarmStatus + } + STATUS current + DESCRIPTION "Event indicating a change in AIS state for a port." + ::= { aprisaXELinkAlarmsEventsV2 151 } + + +-- *************************************************************************** +-- SingleE1 Traps +-- *************************************************************************** + +aprisaXESingleE1LOSEvent NOTIFICATION-TYPE + OBJECTS { aprisaXEEventCardSlot, + aprisaXEEventCardPort, + aprisaXEEventAlarmStatus + } + STATUS current + DESCRIPTION "Event indicating a change in LOS state for a port." + ::= { aprisaXELinkAlarmsEventsV2 160 } + +aprisaXESingleE1AISEvent NOTIFICATION-TYPE + OBJECTS { aprisaXEEventCardSlot, + aprisaXEEventCardPort, + aprisaXEEventAlarmStatus + } + STATUS current + DESCRIPTION "Event indicating a change in AIS state for a port." + ::= { aprisaXELinkAlarmsEventsV2 161 } + + +-- *************************************************************************** +-- HRSD Traps +-- *************************************************************************** + +aprisaXEHrsdCompareOidEvent NOTIFICATION-TYPE + OBJECTS { aprisaXEEventAlarmStatus } + STATUS current + DESCRIPTION "Event indicating that an OID failed its comparison check." + ::= { aprisaXELinkAlarmsEventsV2 170 } + +aprisaXEHrsdCompanionLostEvent NOTIFICATION-TYPE + OBJECTS { aprisaXEEventAlarmStatus } + STATUS current + DESCRIPTION "Event indicating that the HRSD Companion Heartbeat is lost." + ::= { aprisaXELinkAlarmsEventsV2 171 } + +-- *************************************************************************** +-- End Traps +-- *************************************************************************** + +END diff --git a/MIBS/4rf/4RF-APRISAXE-MIB b/MIBS/4rf/4RF-APRISAXE-MIB new file mode 100644 index 0000000..6f587ec --- /dev/null +++ b/MIBS/4rf/4RF-APRISAXE-MIB @@ -0,0 +1,10023 @@ +APRISAXE-MIB-4RF DEFINITIONS ::= BEGIN + +-- +-- File: $Id: 4RF-APRISAXE-MIB.txt,v 1.148.2.1 2007/09/17 01:31:14 di Exp $ +-- +-- Copyright: 2004 4RF COMMUNICATIONS LTD +-- +-- Description: +-- MIB for AprisaXE project. +-- +-- Versions: +-- +-- Release 3 +-- Added support for 4-wire cards and configurable cross-connections +-- +-- Notes: +-- None +-- + + +IMPORTS + + -- Standard imports + MODULE-IDENTITY, OBJECT-TYPE, OBJECT-IDENTITY, NOTIFICATION-TYPE, + Integer32, Unsigned32, Counter32, IpAddress + FROM SNMPv2-SMI + TEXTUAL-CONVENTION, DisplayString + FROM SNMPv2-TC + MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP + FROM SNMPv2-CONF + + -- 4RF Specific imports + fourRFAprisaXE + FROM PRODUCTS-MIB-4RF + FourRFAlarmStatus, FourRFAlarmSeverity, FourRFAlarmEnabled, FourRFAlarmPresent, + FourRFImageVersion, FourRFHardwareVersion, FourRFSerialNumber, FourRFChannelWidth, + FourRFRSSI, FourRFModulationType, FourRFErrorCounter, FourRFFanStatus, + FourRFTemperature, FourRFFrequency, FourRFTxPower, FourRFRfBand, FourRFSNR, + FourRFClockSource, FourRFNetworkClockSelect, FourRFLoopback, + FourRFNetworkClockStatus, FourRFMHSBStatus, FourRFMHSBCommand, FourRFProcessResultType + FROM COMMON-TC-4RF + AprisaXESlotNumber, AprisaXECardType, AprisaXEAlarmSource, AprisaXEPortNumber, + AprisaXEAlarmMapping, AprisaXEAdcVoltage,AprisaXEDbValue, AprisaXEIQData, + AprisaXEAlarmType, AprisaXEChannelControlType, AprisaXETdmPortType, + AprisaXEHardwareVersion, AprisaXEDataStatus, + AprisaXEQuadJetTrafficType, AprisaXEAlarmPolarity, AprisaXEAlarmOutput, + AprisaXEQuadJetLineEncoding, AprisaXE4WRxGain, AprisaXE4WTxGain, + AprisaXE4WInputLevel, AprisaXE4WOutputLevel, + AprisaXEFXOInputLevel, AprisaXEFXOOutputLevel, + AprisaXEFXSInputLevel, AprisaXEFXSOutputLevel, AprisaXEFXSPathMute, + AprisaXESignalState, AprisaXETdmBus,AprisaXEPcmLaw,AprisaXEFXOCountry, + AprisaXEAdpcmCompression,AprisaXEFXSPMLevel, + AprisaXEInterfaceCnxnType,AprisaXEConnectionID, + AprisaXEPcmMode,AprisaXESerialEquipmentMode, + AprisaXEQuadJetConnectionType, AprisaXEHssSerialMode, AprisaXE2WireSignalState, + AprisaXEEthernetPortNumber, AprisaXEEthernetGroup, + AprisaXEEthernetFrameRate, AprisaXEEthernetPortPriority, + AprisaXEEthernetGrouping, AprisaXEEthernetPrioQueueScheduling, AprisaXEEthernetPrioQueueMapping, + AprisaXEDefaultAction, AprisaXEQuadJetLoopbacks, AprisaXEQuadJetWaveFormShapers, + AprisaXECCActivationStatus, AprisaXEQuadJetMultiframeEnable, + AprisaXEPSCActiveRadio, AprisaXEPSCActiveTx + FROM APRISAXE-TC-4RF + fourRFModules + FROM MIB-4RF; + + +-- Module Identification +fourRFAprisaXEModule MODULE-IDENTITY + LAST-UPDATED "200704300000Z" + ORGANIZATION "www.4rf.com" + CONTACT-INFO + "postal: 4RF Communications Ltd + 26 Glover Street + Ngauranga + PO Box 13-506 + Wellington 6032 + New Zealand + + phone: +64 4 499 6000 + email: support@4rf.com" + DESCRIPTION "MIB for the AprisaXE project" + + -- Revision history + -- (in reverse chronological order) + + REVISION "200704300000Z" + DESCRIPTION "Second draft" + + REVISION "200412090304Z" + DESCRIPTION "First draft" + ::= { fourRFModules 5 } + + +aprisaXEConfig OBJECT-IDENTITY + STATUS current + DESCRIPTION "The root of the OID sub-tree for the AprisaXE product configuration." + ::= { fourRFAprisaXE 1 } + +aprisaXEGroups OBJECT-IDENTITY + STATUS current + DESCRIPTION "The root of the OID sub-tree for the AprisaXE object groups." + ::= { aprisaXEConfig 1 } + +aprisaXEObjects OBJECT-IDENTITY + STATUS current + DESCRIPTION "The root of the OID sub-tree for the AprisaXE product objects." + ::= { aprisaXEConfig 2 } + +aprisaXEEvents OBJECT-IDENTITY + STATUS current + DESCRIPTION "The root of the OID sub-tree for the AprisaXE product events." + ::= { aprisaXEConfig 3 } + +aprisaXEEventsV2 OBJECT-IDENTITY + STATUS current + DESCRIPTION "The AprisaXE product events, ensures SNMPv1 compatibility." + ::= { aprisaXEEvents 0 } + +aprisaXETestObjects OBJECT-IDENTITY + STATUS current + DESCRIPTION "The root of the OID sub-tree for the AprisaXE test objects." + ::= { aprisaXEConfig 4 } + + + +-- *************************************************************************** +-- Terminal Settings +-- +-- This object group provides access to basic terminal information such as the +-- Rx and Tx frequencies. This is a product specific enhancement to the common +-- terminalGroup defined in the COMMON-4RF MIB. +-- *************************************************************************** + +aprisaXETerminal OBJECT IDENTIFIER ::= { aprisaXEObjects 1 } + +aprisaXETerminalRfChannelWidth OBJECT-TYPE + SYNTAX FourRFChannelWidth + MAX-ACCESS read-write + STATUS current + DESCRIPTION "The terminal RF channel width, the options are: + 20kHz, 25kHz, 50kHz, 75kHz, 100kHz, 125kHz, 150kHz, 200kHz, 250kHz, + 400kHz, 500kHz, 800kHz, + 1MHz, 1.25MHz, + 1.75MHz, 2MHz, + 3.5MHz, 7MHz" + ::= { aprisaXETerminal 4 } + +aprisaXETerminalRSSI OBJECT-TYPE + SYNTAX FourRFRSSI + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The terminal RSSI in dBm." + ::= { aprisaXETerminal 5 } + +aprisaXETerminalModulationState OBJECT-TYPE + SYNTAX FourRFModulationType + MAX-ACCESS read-write + STATUS current + DESCRIPTION "The terminal modulation state." + ::= { aprisaXETerminal 6 } + +aprisaXETerminalClockReference OBJECT-TYPE + SYNTAX INTEGER { automatic (0), + manual (1) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION "The terminal clock reference configuration: + automatic - + manual - " + ::= { aprisaXETerminal 7 } + +aprisaXETerminalClockSource OBJECT-TYPE + SYNTAX FourRFClockSource + MAX-ACCESS read-write + STATUS current + DESCRIPTION "The terminal clock source configuration: + network - clocking is recovered from the synchronous network + to which the terminal is connected. + link - clocking is recovered from the remote end of the link. + internal - the clock is generated internally. + The clock reference must be in manual mode for this to take effect." + ::= { aprisaXETerminal 8 } + +aprisaXETerminalAlarmStatus OBJECT-TYPE + SYNTAX FourRFAlarmStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The terminal alarm status, this reflects the overall status of the + terminal. This will match the colour of the front panel control LED. + The states used are noAlarm, minorAlarm and majorAlarm." + ::= { aprisaXETerminal 9 } + +aprisaXETerminalRxAlarmStatus OBJECT-TYPE + SYNTAX FourRFAlarmStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The terminal alarm status, this reflects the overall RX status of the + terminal. This will match the colour of the front panel RX LED. + The states used are noAlarm, minorAlarm and majorAlarm." + ::= { aprisaXETerminal 10 } + +aprisaXETerminalTxAlarmStatus OBJECT-TYPE + SYNTAX FourRFAlarmStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The terminal alarm status, this reflects the overall TX status of the + terminal. This will match the colour of the front panel TX LED. + The states used are noAlarm, minorAlarm and majorAlarm." + ::= { aprisaXETerminal 11 } + +aprisaXETerminalBandwidth OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "This returns the total bandwidth available over the link in kbps." + ::= { aprisaXETerminal 12 } + +aprisaXEMotherboardSerialNumber OBJECT-TYPE + SYNTAX FourRFSerialNumber + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The unique serial number for the motherboard." + ::= { aprisaXETerminal 13 } + +aprisaXETerminalAllocatedBandwidth OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "This returns the total bandwidth allocated over the link in kbps." + ::= { aprisaXETerminal 14 } + +aprisaXETerminalLoopbackBandwidth OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "This returns the total loopback bandwidth allocated in kbps." + ::= { aprisaXETerminal 15 } + +aprisaXETerminalNetworkClockPrimaryStatus OBJECT-TYPE + SYNTAX FourRFNetworkClockStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION "This returns the status of the network clock primary source." + ::= { aprisaXETerminal 16 } + +aprisaXETerminalNetworkClockSecondaryStatus OBJECT-TYPE + SYNTAX FourRFNetworkClockStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION "This returns the status of the network clock secondary source." + ::= { aprisaXETerminal 17 } + +aprisaXETerminalNetworkClockCommand OBJECT-TYPE + SYNTAX INTEGER { none (0), + makePrimaryActive (1), + makeSecondaryActive (2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Forces a change in the active network clock." + ::= { aprisaXETerminal 18} + +aprisaXETerminalStartupComplete OBJECT-TYPE + SYNTAX INTEGER { notComplete (0), + startupComplete (1) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates whether the terminal startup sequence is complete." + ::= { aprisaXETerminal 19 } + +aprisaXETerminalImageAlarmClear OBJECT-TYPE + SYNTAX INTEGER { noCommand (0), + clearAlternateImageAlarm (1), + clearDefaultImageAlarm (2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Indicates whether the terminal startup sequence is complete." + ::= { aprisaXETerminal 20 } + +aprisaXETerminalMuxStatus OBJECT-TYPE + SYNTAX INTEGER { none (0), + muxOnly (1) + } + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "This indicates if the terminal is operating in Mux mode." + ::= { aprisaXETerminal 21 } + +aprisaXETerminalBootloaderDataVersion OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "This indicates the data version of the shared data field in the bootloader." + ::= { aprisaXETerminal 22 } + +aprisaXETerminalUploadFailAlarmClear OBJECT-TYPE + SYNTAX INTEGER { noCommand (0), + clearUploadFailAlarm (1) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Used to clear a current Upload Failure Alarm." + ::= { aprisaXETerminal 23 } + +aprisaXETerminalEquipmentType OBJECT-TYPE + SYNTAX INTEGER { axeUnknown (0), + axeRadio (1), + axeMux (2), + axeProtSwitch (3), + axeProtRadio (4) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION "This indicates what type of equipment the terminal is." + ::= { aprisaXETerminal 24 } + + +aprisaXETerminalGroup OBJECT-GROUP + OBJECTS { aprisaXETerminalRfChannelWidth, + aprisaXETerminalRSSI, + aprisaXETerminalModulationState, + aprisaXETerminalClockReference, + aprisaXETerminalClockSource, + aprisaXETerminalAlarmStatus, + aprisaXETerminalRxAlarmStatus, + aprisaXETerminalTxAlarmStatus, + aprisaXETerminalBandwidth, + aprisaXEMotherboardSerialNumber, + aprisaXETerminalAllocatedBandwidth, + aprisaXETerminalLoopbackBandwidth, + aprisaXETerminalNetworkClockPrimaryStatus, + aprisaXETerminalNetworkClockSecondaryStatus, + aprisaXETerminalNetworkClockCommand, + aprisaXETerminalStartupComplete, + aprisaXETerminalImageAlarmClear, + aprisaXETerminalMuxStatus, + aprisaXETerminalBootloaderDataVersion, + aprisaXETerminalUploadFailAlarmClear, + aprisaXETerminalEquipmentType + } + STATUS current + DESCRIPTION "The AprisaXE terminal settings group." + ::= { aprisaXEGroups 1 } + +-- *************************************************************************** +-- End Terminal Settings +-- *************************************************************************** + + + +-- *************************************************************************** +-- Terminal performance information +-- +-- This section provides basic performance statistics for the terminal. +-- *************************************************************************** + +aprisaXEPerformance OBJECT IDENTIFIER ::= { aprisaXEObjects 6 } + +aprisaXECorrectableErrorCount OBJECT-TYPE + SYNTAX FourRFErrorCounter + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The terminal correctable error count." + ::= { aprisaXEPerformance 1 } + +aprisaXEUncorrectableErrorCount OBJECT-TYPE + SYNTAX FourRFErrorCounter + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The terminal uncorrectable error count." + ::= { aprisaXEPerformance 2 } + +aprisaXEModemSNR OBJECT-TYPE + SYNTAX FourRFSNR + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The modem signal to noise ratio." + ::= { aprisaXEPerformance 3 } + +aprisaXETxPacketCount OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The terminal transmitted ethernet packet count (to link)." + ::= { aprisaXEPerformance 4 } + +aprisaXERxPacketCount OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The terminal received ethernet packet count (from link)." + ::= { aprisaXEPerformance 5 } + +aprisaXERxPacketErrorCount OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The terminal received ethernet packet error count (from link)." + ::= { aprisaXEPerformance 6 } + +aprisaXEErrorCounterCommand OBJECT-TYPE + SYNTAX INTEGER { countersRunning (0), + resetCounters (1), + freezeCounters (2), + unfreezeCounters (3) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Forces reset, freeze or unfreeze the error counters." + ::= { aprisaXEPerformance 7 } + +aprisaXEErrorFreeSeconds OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The number of Error Free Seconds for the terminal." + ::= { aprisaXEPerformance 8 } + +aprisaXEErroredSeconds OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The number of Errored Seconds for the terminal." + ::= { aprisaXEPerformance 9 } + +aprisaXEBERExponent OBJECT-TYPE + SYNTAX DisplayString ( SIZE (0..64) ) + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The exponent of the Bit Error Rate for the terminal." + ::= { aprisaXEPerformance 10 } + +aprisaXEPscSysUncorrectableErrorCount OBJECT-TYPE + SYNTAX DisplayString ( SIZE (0..64) ) + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The terminal uncorrectable error count." + ::= { aprisaXEPerformance 11 } + +aprisaXEPscSysErrorFreeSeconds OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The number of Error Free Seconds for the terminal." + ::= { aprisaXEPerformance 12 } + +aprisaXEPscSysErroredSeconds OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The number of Errored Seconds for the terminal." + ::= { aprisaXEPerformance 13 } + +aprisaXEPscSysBERExponent OBJECT-TYPE + SYNTAX DisplayString( SIZE(0..64) ) + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The exponent of the Bit Error Rate for the terminal." + ::= { aprisaXEPerformance 14 } + +aprisaXEPscRadioAUncorrectableErrorCount OBJECT-TYPE + SYNTAX FourRFErrorCounter + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The terminal uncorrectable error count." + ::= { aprisaXEPerformance 15 } + +aprisaXEPscRadioAErrorFreeSeconds OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The number of Error Free Seconds for the terminal." + ::= { aprisaXEPerformance 16 } + +aprisaXEPscRadioAErroredSeconds OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The number of Errored Seconds for the terminal." + ::= { aprisaXEPerformance 17 } + +aprisaXEPscRadioABERExponent OBJECT-TYPE + SYNTAX DisplayString( SIZE(0..64) ) + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The exponent of the Bit Error Rate for the terminal." + ::= { aprisaXEPerformance 18 } + +aprisaXEPscRadioBUncorrectableErrorCount OBJECT-TYPE + SYNTAX FourRFErrorCounter + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The terminal uncorrectable error count." + ::= { aprisaXEPerformance 19 } + +aprisaXEPscRadioBErrorFreeSeconds OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The number of Error Free Seconds for the terminal." + ::= { aprisaXEPerformance 20 } + +aprisaXEPscRadioBErroredSeconds OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The number of Errored Seconds for the terminal." + ::= { aprisaXEPerformance 21 } + +aprisaXEPscRadioBBERExponent OBJECT-TYPE + SYNTAX DisplayString( SIZE(0..64) ) + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The exponent of the Bit Error Rate for the terminal." + ::= { aprisaXEPerformance 22 } + +aprisaXEPerformanceGroup OBJECT-GROUP + OBJECTS { aprisaXECorrectableErrorCount, + aprisaXEUncorrectableErrorCount, + aprisaXEModemSNR, + aprisaXETxPacketCount, + aprisaXERxPacketCount, + aprisaXERxPacketErrorCount, + aprisaXEErrorCounterCommand, + aprisaXEErrorFreeSeconds, + aprisaXEErroredSeconds, + aprisaXEBERExponent, + aprisaXEPscSysUncorrectableErrorCount, + aprisaXEPscSysErrorFreeSeconds, + aprisaXEPscSysErroredSeconds, + aprisaXEPscSysBERExponent, + aprisaXEPscRadioAUncorrectableErrorCount, + aprisaXEPscRadioAErrorFreeSeconds, + aprisaXEPscRadioAErroredSeconds, + aprisaXEPscRadioABERExponent, + aprisaXEPscRadioBUncorrectableErrorCount, + aprisaXEPscRadioBErrorFreeSeconds, + aprisaXEPscRadioBErroredSeconds, + aprisaXEPscRadioBBERExponent + } + STATUS current + DESCRIPTION "The AprisaXE terminal performance group." + ::= { aprisaXEGroups 6 } + +-- *************************************************************************** +-- End Performance +-- *************************************************************************** + + + +-- *************************************************************************** +-- External Alarms +-- +-- This section specifies the MIB attributes for handling external alarm +-- inputs and outputs. For AprisaXE there are two external alarm inputs +-- and four external alarm outputs. Two of the external alarm outputs will +-- be used to reflect the alarm state of the remote terminal, one for major +-- and one for minor alarms. +-- +-- The alarms can be enabled and disabled and the severity associated with +-- the inputs can be set. The polarity indicating an alarm can also be set. +-- *************************************************************************** + +aprisaXEExternalAlarms OBJECT IDENTIFIER ::= { aprisaXEObjects 11 } + +-- The first external alarm input +aprisaXEExternalAlarm1 OBJECT IDENTIFIER ::= { aprisaXEExternalAlarms 1 } + +aprisaXEExternalAlarm1Status OBJECT-TYPE + SYNTAX FourRFAlarmStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The status of the first external alarm input." + ::= { aprisaXEExternalAlarm1 1 } + +aprisaXEExternalAlarm1Severity OBJECT-TYPE + SYNTAX FourRFAlarmSeverity + MAX-ACCESS read-write + STATUS current + DESCRIPTION "The severity of the first external alarm input." + ::= { aprisaXEExternalAlarm1 2 } + +aprisaXEExternalAlarm1Enabled OBJECT-TYPE + SYNTAX FourRFAlarmEnabled + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Indicates whether the first external alarm input is enabled. + If not changes to the input will be ignored. By default the + alarm is enabled." + ::= { aprisaXEExternalAlarm1 3 } + +aprisaXEExternalAlarm1Mapping OBJECT-TYPE + SYNTAX AprisaXEAlarmMapping + MAX-ACCESS read-write + STATUS current + DESCRIPTION "This defines how the first external alarm input is mapped to + the remote alarms." + ::= { aprisaXEExternalAlarm1 4 } + +aprisaXEExternalAlarm1Description OBJECT-TYPE + SYNTAX DisplayString ( SIZE (0..64) ) + MAX-ACCESS read-write + STATUS current + DESCRIPTION "A description (user defined) for the external alarm." + ::= { aprisaXEExternalAlarm1 5 } + +aprisaXEExternalAlarm1Group OBJECT-GROUP + OBJECTS { aprisaXEExternalAlarm1Status, + aprisaXEExternalAlarm1Severity, + aprisaXEExternalAlarm1Enabled, + aprisaXEExternalAlarm1Mapping, + aprisaXEExternalAlarm1Description + } + STATUS current + DESCRIPTION "The AprisaXE first external alarm input group." + ::= { aprisaXEGroups 11 } + + +-- The second external alarm input +aprisaXEExternalAlarm2 OBJECT IDENTIFIER ::= { aprisaXEExternalAlarms 2 } + +aprisaXEExternalAlarm2Status OBJECT-TYPE + SYNTAX FourRFAlarmStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The status of the second external alarm input." + ::= { aprisaXEExternalAlarm2 1 } + +aprisaXEExternalAlarm2Severity OBJECT-TYPE + SYNTAX FourRFAlarmSeverity + MAX-ACCESS read-write + STATUS current + DESCRIPTION "The severity of the second external alarm input." + ::= { aprisaXEExternalAlarm2 2 } + +aprisaXEExternalAlarm2Enabled OBJECT-TYPE + SYNTAX FourRFAlarmEnabled + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Indicates whether the second external alarm input is enabled. + If not changes to the input will be ignored. By default the + alarm is enabled." + ::= { aprisaXEExternalAlarm2 3 } + +aprisaXEExternalAlarm2Mapping OBJECT-TYPE + SYNTAX AprisaXEAlarmMapping + MAX-ACCESS read-write + STATUS current + DESCRIPTION "This defines how the second external alarm input is mapped to + the remote alarms." + ::= { aprisaXEExternalAlarm2 4 } + +aprisaXEExternalAlarm2Description OBJECT-TYPE + SYNTAX DisplayString ( SIZE (0..64) ) + MAX-ACCESS read-write + STATUS current + DESCRIPTION "A description (user defined) for the external alarm." + ::= { aprisaXEExternalAlarm2 5 } + +aprisaXEExternalAlarm2Group OBJECT-GROUP + OBJECTS { aprisaXEExternalAlarm2Status, + aprisaXEExternalAlarm2Severity, + aprisaXEExternalAlarm2Enabled, + aprisaXEExternalAlarm2Mapping, + aprisaXEExternalAlarm2Description + } + STATUS current + DESCRIPTION "The AprisaXE second external alarm input group." + ::= { aprisaXEGroups 16 } + + +-- General configuration + +aprisaXEExternalAlarmPolarity OBJECT-TYPE + SYNTAX AprisaXEAlarmPolarity + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Indicates the polarity used to indicate the presence of an + alarm at an external alarm input." + ::= { aprisaXEExternalAlarms 3 } + +aprisaXEExternalAlarmOutputPolarity OBJECT-TYPE + SYNTAX INTEGER { polarityClosed (0), + polarityOpen (1) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Indicates the polarity used to indicate the presence of an + alarm at an external alarm output, this may be different from + the input polarity." + ::= { aprisaXEExternalAlarms 4 } + +aprisaXEExternalAlarmsGroup OBJECT-GROUP + OBJECTS { aprisaXEExternalAlarmPolarity, + aprisaXEExternalAlarmOutputPolarity + } + STATUS current + DESCRIPTION "The AprisaXE general external alarm details group." + ::= { aprisaXEGroups 17 } + + +-- The first external alarm output +aprisaXEExternalAlarmOutputOne OBJECT IDENTIFIER ::= { aprisaXEExternalAlarms 5 } + +aprisaXEExternalAlarmOutputOneStatus OBJECT-TYPE + SYNTAX FourRFAlarmStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The status of the first external alarm output." + ::= { aprisaXEExternalAlarmOutputOne 1 } + +aprisaXEExternalAlarmOutputOneMapping OBJECT-TYPE + SYNTAX AprisaXEAlarmMapping + MAX-ACCESS read-write + STATUS current + DESCRIPTION "This defines how the first external alarm output is mapped to + the alarms." + ::= { aprisaXEExternalAlarmOutputOne 2 } + +aprisaXEExternalAlarmOutputOneGroup OBJECT-GROUP + OBJECTS { aprisaXEExternalAlarmOutputOneStatus, + aprisaXEExternalAlarmOutputOneMapping + } + STATUS current + DESCRIPTION "The AprisaXE first external alarm output group." + ::= { aprisaXEGroups 12 } + +-- The second external alarm output +aprisaXEExternalAlarmOutputTwo OBJECT IDENTIFIER ::= { aprisaXEExternalAlarms 6 } + +aprisaXEExternalAlarmOutputTwoStatus OBJECT-TYPE + SYNTAX FourRFAlarmStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The status of the second external alarm output." + ::= { aprisaXEExternalAlarmOutputTwo 1 } + +aprisaXEExternalAlarmOutputTwoMapping OBJECT-TYPE + SYNTAX AprisaXEAlarmMapping + MAX-ACCESS read-write + STATUS current + DESCRIPTION "This defines how the second external alarm output is mapped to + the alarms." + ::= { aprisaXEExternalAlarmOutputTwo 2 } + +aprisaXEExternalAlarmOutputTwoGroup OBJECT-GROUP + OBJECTS { aprisaXEExternalAlarmOutputTwoStatus, + aprisaXEExternalAlarmOutputTwoMapping + } + STATUS current + DESCRIPTION "The AprisaXE second external alarm output group." + ::= { aprisaXEGroups 13 } + +-- The third external alarm output +aprisaXEExternalAlarmOutputThree OBJECT IDENTIFIER ::= { aprisaXEExternalAlarms 7 } + +aprisaXEExternalAlarmOutputThreeStatus OBJECT-TYPE + SYNTAX FourRFAlarmStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The status of the third external alarm output." + ::= { aprisaXEExternalAlarmOutputThree 1 } + +aprisaXEExternalAlarmOutputThreeMapping OBJECT-TYPE + SYNTAX AprisaXEAlarmMapping + MAX-ACCESS read-write + STATUS current + DESCRIPTION "This defines how the third external alarm output is mapped to + the alarms." + ::= { aprisaXEExternalAlarmOutputThree 2 } + +aprisaXEExternalAlarmOutputThreeGroup OBJECT-GROUP + OBJECTS { aprisaXEExternalAlarmOutputThreeStatus, + aprisaXEExternalAlarmOutputThreeMapping + } + STATUS current + DESCRIPTION "The AprisaXE third external alarm output group." + ::= { aprisaXEGroups 14 } + +-- The fourth external alarm output +aprisaXEExternalAlarmOutputFour OBJECT IDENTIFIER ::= { aprisaXEExternalAlarms 8 } + +aprisaXEExternalAlarmOutputFourStatus OBJECT-TYPE + SYNTAX FourRFAlarmStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The status of the fourth external alarm output." + ::= { aprisaXEExternalAlarmOutputFour 1 } + +aprisaXEExternalAlarmOutputFourMapping OBJECT-TYPE + SYNTAX AprisaXEAlarmMapping + MAX-ACCESS read-write + STATUS current + DESCRIPTION "This defines how the fourth external alarm output is mapped to + the alarms." + ::= { aprisaXEExternalAlarmOutputFour 2 } + +aprisaXEExternalAlarmOutputFourGroup OBJECT-GROUP + OBJECTS { aprisaXEExternalAlarmOutputFourStatus, + aprisaXEExternalAlarmOutputFourMapping + } + STATUS current + DESCRIPTION "The AprisaXE fourth external alarm output group." + ::= { aprisaXEGroups 15 } + +-- *************************************************************************** +-- End External Alarms +-- *************************************************************************** + + + +-- *************************************************************************** +-- Remote Alarms +-- +-- This section specifies the MIB attributes for handling alarms from the +-- remote terminal. The remote terminal can report a major or minor alarm +-- or both. The MIB will provide access to the status of both the major and +-- minor alarms. The remote alarms can be mapped to the external alarm outputs. +-- *************************************************************************** + +aprisaXERemoteAlarms OBJECT IDENTIFIER ::= { aprisaXEObjects 16 } + +aprisaXEMajorRemoteAlarmStatus OBJECT-TYPE + SYNTAX FourRFAlarmStatus + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "The status of the remote major alarm." + ::= { aprisaXERemoteAlarms 1 } + +aprisaXEMajorRemoteAlarmOutput OBJECT-TYPE + SYNTAX AprisaXEAlarmOutput + MAX-ACCESS read-write + STATUS obsolete + DESCRIPTION "This defines how the remote major alarm is mapped to the + external alarm outputs." + ::= { aprisaXERemoteAlarms 2 } + +aprisaXEMinorRemoteAlarmStatus OBJECT-TYPE + SYNTAX FourRFAlarmStatus + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "The status of the remote minor alarm." + ::= { aprisaXERemoteAlarms 10 } + +aprisaXEMinorRemoteAlarmOutput OBJECT-TYPE + SYNTAX AprisaXEAlarmOutput + MAX-ACCESS read-write + STATUS obsolete + DESCRIPTION "This defines how the remote minor alarm is mapped to the + external alarm outputs." + ::= { aprisaXERemoteAlarms 11 } + +aprisaXERemoteAlarmGroup OBJECT-GROUP + OBJECTS { aprisaXEMajorRemoteAlarmStatus, + aprisaXEMajorRemoteAlarmOutput, + aprisaXEMinorRemoteAlarmStatus, + aprisaXEMinorRemoteAlarmOutput + } + STATUS obsolete + DESCRIPTION "The AprisaXE remote alarm status group. + This group has been replaced by the now mappable external + alarm output OIDs aprisaXEExternalAlarmOutputXXXGroup." + ::= { aprisaXEGroups 21 } + + + +-- *************************************************************************** +-- MHSB Mode +-- +-- This section specifies the MIB attributes for handling MHSB Mode +-- *************************************************************************** + +aprisaXEMHSB OBJECT IDENTIFIER ::= {aprisaXEObjects 19 } + +aprisaXEMHSBStatus OBJECT-TYPE + SYNTAX FourRFMHSBStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The state of an MHSB configured terminal." + ::= {aprisaXEMHSB 1} + +aprisaXEMHSBEnable OBJECT-TYPE + SYNTAX INTEGER { disabled (0), + enabled (1) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Set the terminal into Monitored Hot Standby Mode." + ::= { aprisaXEMHSB 2} + +aprisaXEMHSBCommand OBJECT-TYPE + SYNTAX FourRFMHSBCommand + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Commands to apply while in MHSB mode." + ::= { aprisaXEMHSB 3} + +aprisaXEMHSBTerminalSelect OBJECT-TYPE + SYNTAX INTEGER { none (0), + terminalA (1), + terminalB (2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Configure terminal as terminal A or terminal B of an MHSB pair." + ::= {aprisaXEMHSB 4} + +aprisaXEMHSBSwitchoverStatus OBJECT-TYPE + SYNTAX FourRFAlarmStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Status of the alarm reflecting if a switchover has occurred." + ::= {aprisaXEMHSB 5} + +aprisaXEMHSBGroup OBJECT-GROUP + OBJECTS { aprisaXEMHSBStatus, + aprisaXEMHSBEnable, + aprisaXEMHSBCommand, + aprisaXEMHSBTerminalSelect, + aprisaXEMHSBSwitchoverStatus + } + STATUS current + DESCRIPTION "The aprisaXE MHSB group." + ::= { aprisaXEGroups 23} + + + +-- *************************************************************************** +-- Fan Status +-- +-- This section specifies the MIB attributes for handling the fan status. +-- *************************************************************************** + +aprisaXEFans OBJECT IDENTIFIER ::= { aprisaXEObjects 21 } + +aprisaXEFan1Status OBJECT-TYPE + SYNTAX FourRFFanStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The status of the fan one." + ::= { aprisaXEFans 1 } + +aprisaXEFan2Status OBJECT-TYPE + SYNTAX FourRFFanStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The status of the fan two." + ::= { aprisaXEFans 2 } + +aprisaXEFanEnable OBJECT-TYPE + SYNTAX INTEGER { fansDisabled (0), + fansEnabled (1) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Turn the fans on or off." + ::= { aprisaXEFans 3 } + +aprisaXEFanGroup OBJECT-GROUP + OBJECTS { aprisaXEFan1Status, + aprisaXEFan2Status, + aprisaXEFanEnable + } + STATUS current + DESCRIPTION "The AprisaXE fan status group." + ::= { aprisaXEGroups 26 } + + + +-- *************************************************************************** +-- AlarmTable +-- +-- This section defines the alarm table. This is used to report all currently +-- active alarms. A maximum of 500 alarms will be stored in the table. +-- *************************************************************************** + +aprisaXEAlarmTable OBJECT-TYPE + SYNTAX SEQUENCE OF AprisaXEAlarmEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "This table stores the currently active alarms. Up to 500 + separate alarms will be stored in the table." + ::= { aprisaXEObjects 26 } + +AprisaXEAlarmEntry ::= SEQUENCE { + aprisaXEAlarmIndex INTEGER, + aprisaXEAlarmSlot INTEGER, + aprisaXEAlarmSource INTEGER, + aprisaXEAlarmPort INTEGER, + aprisaXEAlarmSeverity INTEGER, + aprisaXEAlarmType INTEGER, + aprisaXEAlarmTime OCTET STRING + } + +aprisaXEAlarmEntry OBJECT-TYPE + SYNTAX AprisaXEAlarmEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "The table entry index specification, just the alarm index." + INDEX { aprisaXEAlarmIndex } + ::= { aprisaXEAlarmTable 1 } + +aprisaXEAlarmIndex OBJECT-TYPE + SYNTAX INTEGER ( 0..500 ) + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The index into the alarm table." + ::= { aprisaXEAlarmEntry 1 } + +aprisaXEAlarmSlot OBJECT-TYPE + SYNTAX AprisaXESlotNumber + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The number of the slot generating the alarm." + ::= { aprisaXEAlarmEntry 2 } + +aprisaXEAlarmSource OBJECT-TYPE + SYNTAX AprisaXEAlarmSource + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The source of the alarm, a card type or external." + ::= { aprisaXEAlarmEntry 3 } + +aprisaXEAlarmPort OBJECT-TYPE + SYNTAX AprisaXEPortNumber + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The source port of the alarm." + ::= { aprisaXEAlarmEntry 4 } + +aprisaXEAlarmSeverity OBJECT-TYPE + SYNTAX FourRFAlarmSeverity + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The severity of the alarm." + ::= { aprisaXEAlarmEntry 5 } + +aprisaXEAlarmType OBJECT-TYPE + SYNTAX AprisaXEAlarmType + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The type of the alarm." + ::= { aprisaXEAlarmEntry 6 } + +aprisaXEAlarmTime OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The time that the alarm occurred." + ::= { aprisaXEAlarmEntry 7 } + +-- *************************************************************************** +-- End AlarmTable +-- *************************************************************************** + + + +-- *************************************************************************** +-- AlarmHistoryTable +-- +-- This section defines the alarm table. A maximum of 100 alarms will be stored +-- in the table. +-- *************************************************************************** + +aprisaXEAlarmHistoryTable OBJECT-TYPE + SYNTAX SEQUENCE OF AprisaXEAlarmHistoryEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "This table stores a history of the alarms as they become + active and cleared." + ::= { aprisaXEObjects 31 } + +AprisaXEAlarmHistoryEntry ::= SEQUENCE { + aprisaXEAlarmHistoryIndex INTEGER, + aprisaXEAlarmHistorySlot INTEGER, + aprisaXEAlarmHistorySource INTEGER, + aprisaXEAlarmHistoryPort INTEGER, + aprisaXEAlarmHistorySeverity INTEGER, + aprisaXEAlarmHistoryType INTEGER, + aprisaXEAlarmHistoryPresent INTEGER, + aprisaXEAlarmHistoryTime OCTET STRING + } + +aprisaXEAlarmHistoryEntry OBJECT-TYPE + SYNTAX AprisaXEAlarmHistoryEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "The table entry index specification, just the alarm index." + INDEX { aprisaXEAlarmHistoryIndex } + ::= { aprisaXEAlarmHistoryTable 1 } + +aprisaXEAlarmHistoryIndex OBJECT-TYPE + SYNTAX INTEGER ( 0..100 ) + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The index into the alarm history table." + ::= { aprisaXEAlarmHistoryEntry 1 } + +aprisaXEAlarmHistorySlot OBJECT-TYPE + SYNTAX AprisaXESlotNumber + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The number of the slot generating the alarm." + ::= { aprisaXEAlarmHistoryEntry 2 } + +aprisaXEAlarmHistorySource OBJECT-TYPE + SYNTAX AprisaXEAlarmSource + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The source of the alarm, a card type or external." + ::= { aprisaXEAlarmHistoryEntry 3 } + +aprisaXEAlarmHistoryPort OBJECT-TYPE + SYNTAX AprisaXEPortNumber + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The source port of the alarm." + ::= { aprisaXEAlarmHistoryEntry 4 } + +aprisaXEAlarmHistorySeverity OBJECT-TYPE + SYNTAX FourRFAlarmSeverity + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The severity of the alarm." + ::= { aprisaXEAlarmHistoryEntry 5 } + + +aprisaXEAlarmHistoryType OBJECT-TYPE + SYNTAX AprisaXEAlarmType + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The type of the alarm." + ::= { aprisaXEAlarmHistoryEntry 6 } + +aprisaXEAlarmHistoryPresent OBJECT-TYPE + SYNTAX FourRFAlarmPresent + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates whether the alarm is present or not." + ::= { aprisaXEAlarmHistoryEntry 7 } + +aprisaXEAlarmHistoryTime OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The time that the alarm state change occurred." + ::= { aprisaXEAlarmHistoryEntry 8 } + +-- *************************************************************************** +-- End AlarmHistoryTable +-- *************************************************************************** + + + +aprisaXEAlarmControl OBJECT IDENTIFIER ::= { aprisaXEObjects 32 } + +aprisaXEAlarmHistoryCommand OBJECT-TYPE + SYNTAX INTEGER { noCommand (0), + clearHistory (1) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Allows the alarm history table to be cleared." + ::= { aprisaXEAlarmControl 1 } + +aprisaXEAlarmControlGroup OBJECT-GROUP + OBJECTS { aprisaXEAlarmHistoryCommand } + STATUS current + DESCRIPTION "The AprisaXE alarm control group." + ::= { aprisaXEGroups 32 } + + + +-- *************************************************************************** +-- Transmitter - there is only one transmitter for each AprisaXE +-- +-- NB: The units for all fields need to be confirmed +-- +-- *************************************************************************** + +aprisaXETransmitter OBJECT IDENTIFIER ::= { aprisaXEObjects 36 } + +aprisaXETransmitterStatus OBJECT-TYPE + SYNTAX INTEGER { transmitterOff (0), + transmitterOn (1) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates whether the transmitter is currently on or off." + ::= { aprisaXETransmitter 1 } + +aprisaXETransmitterCommand OBJECT-TYPE + SYNTAX INTEGER { noCommand (0), + transmitterOff (1), + transmitterOn (2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Commands used to control the transmitter, currently the transmitter can + be switched on and off. No other commands are defined." + ::= { aprisaXETransmitter 2 } + +aprisaXETransmitterSynthesiserStatus OBJECT-TYPE + SYNTAX FourRFAlarmStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The status of the transmitter synthesiser." + ::= { aprisaXETransmitter 3 } + +aprisaXETransmitter5VPowerStatus OBJECT-TYPE + SYNTAX FourRFAlarmStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The status of the transmitter 5V power supply." + ::= { aprisaXETransmitter 4 } + +aprisaXETransmitter11VPowerStatus OBJECT-TYPE + SYNTAX FourRFAlarmStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The status of the transmitter 11V power supply." + ::= { aprisaXETransmitter 5 } + +aprisaXETransmitter28VPowerStatus OBJECT-TYPE + SYNTAX FourRFAlarmStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The status of the transmitter 28V power supply." + ::= { aprisaXETransmitter 6 } + +aprisaXETransmitterFrequency OBJECT-TYPE + SYNTAX FourRFFrequency + MAX-ACCESS read-write + STATUS current + DESCRIPTION "The terminal transmit frequency in MHz. The possible bands are: + 330 to 400 MHz (300 MHz) + 400 to 470 MHz (400 MHz) + 1350 to 1550 MHz (1400 MHz) + The frequency value should be supplied in Hz." + ::= { aprisaXETransmitter 7 } + +aprisaXETransmitterPower OBJECT-TYPE + SYNTAX FourRFTxPower + MAX-ACCESS read-write + STATUS current + DESCRIPTION "The TX power value, the value should be entered in dB." + ::= { aprisaXETransmitter 8 } + +aprisaXETransmitterAGC OBJECT-TYPE + SYNTAX AprisaXEAdcVoltage + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "The Automatic Gain Control value in millivolts." + ::= { aprisaXETransmitter 9 } + +aprisaXETransmitterForwardPower OBJECT-TYPE + SYNTAX AprisaXEAdcVoltage + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "The forward power measurement value in millivolts." + ::= { aprisaXETransmitter 10 } + +aprisaXETransmitterReversePower OBJECT-TYPE + SYNTAX AprisaXEAdcVoltage + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "The reverse power value in millivolts." + ::= { aprisaXETransmitter 11 } + +aprisaXETransmitterTemperature OBJECT-TYPE + SYNTAX FourRFTemperature + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "The temperature value in degrees Celcius." + ::= { aprisaXETransmitter 12 } + +aprisaXETransmitterVTune OBJECT-TYPE + SYNTAX AprisaXEAdcVoltage + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "The voltage output from TX synth." + ::= { aprisaXETransmitter 13 } + +aprisaXETransmitter28VSupply OBJECT-TYPE + SYNTAX AprisaXEAdcVoltage + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "The 28V supply rail value in millivolts." + ::= { aprisaXETransmitter 14 } + +aprisaXETransmitter11VSupply OBJECT-TYPE + SYNTAX AprisaXEAdcVoltage + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "The 11V supply rail value in millivolts." + ::= { aprisaXETransmitter 15 } + +aprisaXETransmitter5VDigitalSupply OBJECT-TYPE + SYNTAX AprisaXEAdcVoltage + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "The 5V digital supply rail value in millivolts." + ::= { aprisaXETransmitter 16 } + +aprisaXETransmitter7VSupply OBJECT-TYPE + SYNTAX AprisaXEAdcVoltage + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "The 7V RF supply rail value in millivolts." + ::= { aprisaXETransmitter 17 } + +aprisaXETransmitter9VSupply OBJECT-TYPE + SYNTAX AprisaXEAdcVoltage + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "The 9V supply synthesiser rail value in millivolts." + ::= { aprisaXETransmitter 18 } + +aprisaXETransmitterCharacterisationDataStatus OBJECT-TYPE + SYNTAX AprisaXEDataStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The status of the transmitter characterisation data." + ::= { aprisaXETransmitter 19 } + +aprisaXETransmitterSerialNumber OBJECT-TYPE + SYNTAX FourRFSerialNumber + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The unique module serial number for the transmitter." + ::= { aprisaXETransmitter 20 } + +aprisaXETransmitterReturnLoss OBJECT-TYPE + SYNTAX AprisaXEDbValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The return loss for the transmitter." + ::= { aprisaXETransmitter 21 } + +aprisaXETransmitterMibDataStatus OBJECT-TYPE + SYNTAX AprisaXEDataStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The status of the transmitter MIB data." + ::= { aprisaXETransmitter 22 } + +aprisaXETransmitterADCChZero OBJECT-TYPE + SYNTAX AprisaXEAdcVoltage + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The TX adc ch zero voltage." + ::= { aprisaXETransmitter 23 } + +aprisaXETransmitterADCChOne OBJECT-TYPE + SYNTAX AprisaXEAdcVoltage + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The TX adc ch one voltage." + ::= { aprisaXETransmitter 24 } + +aprisaXETransmitterADCChTwo OBJECT-TYPE + SYNTAX AprisaXEAdcVoltage + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The TX adc ch two voltage." + ::= { aprisaXETransmitter 25 } + +aprisaXETransmitterADCChThree OBJECT-TYPE + SYNTAX AprisaXEAdcVoltage + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The TX adc ch three voltage." + ::= { aprisaXETransmitter 26 } + +aprisaXETransmitterADCChFour OBJECT-TYPE + SYNTAX AprisaXEAdcVoltage + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The TX adc ch four voltage." + ::= { aprisaXETransmitter 27 } + +aprisaXETransmitterADCChFive OBJECT-TYPE + SYNTAX AprisaXEAdcVoltage + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The TX adc ch five voltage." + ::= { aprisaXETransmitter 28 } + +aprisaXETransmitterADCChSix OBJECT-TYPE + SYNTAX AprisaXEAdcVoltage + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The TX adc ch six voltage." + ::= { aprisaXETransmitter 29 } + +aprisaXETransmitterADCChSeven OBJECT-TYPE + SYNTAX AprisaXEAdcVoltage + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The TX adc ch seven voltage." + ::= { aprisaXETransmitter 30 } + +aprisaXETransmitterADCChEight OBJECT-TYPE + SYNTAX AprisaXEAdcVoltage + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The TX adc ch eight voltage." + ::= { aprisaXETransmitter 31 } + +aprisaXETransmitterADCChNine OBJECT-TYPE + SYNTAX AprisaXEAdcVoltage + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The TX adc ch nine voltage." + ::= { aprisaXETransmitter 32 } + +aprisaXETransmitterADCChTen OBJECT-TYPE + SYNTAX AprisaXEAdcVoltage + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The TX adc ch ten voltage." + ::= { aprisaXETransmitter 33 } + +aprisaXETransmitterADCChEleven OBJECT-TYPE + SYNTAX AprisaXEAdcVoltage + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The TX adc ch eleven voltage." + ::= { aprisaXETransmitter 34 } + +aprisaXETransmitterNeg5VPowerStatus OBJECT-TYPE + SYNTAX FourRFAlarmStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The status of the transmitter Negative 5V power supply." + ::= { aprisaXETransmitter 35 } + +aprisaXETransmitterAmplifierBalanceStatus OBJECT-TYPE + SYNTAX FourRFAlarmStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The status of the transmitter Balanced Power Amplifier." + ::= { aprisaXETransmitter 36 } + +aprisaXETransmitterTcxoAdjustment OBJECT-TYPE + SYNTAX INTEGER { txTCXOAdjustmentPosFive (0), + txTCXOAdjustmentPosOne (1), + txTCXOAdjustmentZero (2), + txTCXOAdjustmentNegOne (3), + txTCXOAdjustmentNegFive (4) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION "The TX TCXO adjustment to be made by the customer, to + tune the TCXO. This is a shift in DAC steps." + ::= { aprisaXETransmitter 37 } + +aprisaXETransmitterSynthFileVersion OBJECT-TYPE + SYNTAX INTEGER ( 0..999 ) + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The version of the Synth File loaded from the filesystem." + ::= { aprisaXETransmitter 38 } + +aprisaXETransmitterOperationalDataVersion OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The version of the operational data for the transmitter." + ::= { aprisaXETransmitter 39 } + +aprisaXETransmitterSwCompatibility OBJECT-TYPE + SYNTAX INTEGER ( 0..999 ) + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The transmitter software compatibility number." + ::= { aprisaXETransmitter 40 } + +aprisaXETransmitterGroup OBJECT-GROUP + OBJECTS { aprisaXETransmitterStatus, + aprisaXETransmitterCommand, + aprisaXETransmitterSynthesiserStatus, + aprisaXETransmitter5VPowerStatus, + aprisaXETransmitter11VPowerStatus, + aprisaXETransmitter28VPowerStatus, + aprisaXETransmitterFrequency, + aprisaXETransmitterPower, + aprisaXETransmitterAGC, + aprisaXETransmitterForwardPower, + aprisaXETransmitterReversePower, + aprisaXETransmitterTemperature, + aprisaXETransmitterVTune, + aprisaXETransmitter28VSupply, + aprisaXETransmitter11VSupply, + aprisaXETransmitter5VDigitalSupply, + aprisaXETransmitter7VSupply, + aprisaXETransmitter9VSupply, + aprisaXETransmitterCharacterisationDataStatus, + aprisaXETransmitterSerialNumber, + aprisaXETransmitterReturnLoss, + aprisaXETransmitterMibDataStatus, + aprisaXETransmitterADCChZero, + aprisaXETransmitterADCChOne, + aprisaXETransmitterADCChTwo, + aprisaXETransmitterADCChThree, + aprisaXETransmitterADCChFour, + aprisaXETransmitterADCChFive, + aprisaXETransmitterADCChSix, + aprisaXETransmitterADCChSeven, + aprisaXETransmitterADCChEight, + aprisaXETransmitterADCChNine, + aprisaXETransmitterADCChTen, + aprisaXETransmitterADCChEleven, + aprisaXETransmitterNeg5VPowerStatus, + aprisaXETransmitterAmplifierBalanceStatus, + aprisaXETransmitterTcxoAdjustment, + aprisaXETransmitterSynthFileVersion + } + STATUS current + DESCRIPTION "The AprisaXE transmitter settings group." + ::= { aprisaXEGroups 36 } + +-- *************************************************************************** +-- End Transmitter +-- *************************************************************************** + + + +-- *************************************************************************** +-- Receiver - there is only one Receiver for each AprisaXE +-- +-- NB: The units for all fields need to be confirmed +-- +-- *************************************************************************** + +aprisaXEReceiver OBJECT IDENTIFIER ::= { aprisaXEObjects 51 } + +aprisaXEReceiverStatus OBJECT-TYPE + SYNTAX INTEGER { receiverOff (0), + receiverOn (1) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Status of the receiver, currently the receiver can be On/Off + and the loopback can be On/Off." + ::= { aprisaXEReceiver 1 } + +aprisaXEReceiverCommand OBJECT-TYPE + SYNTAX INTEGER { noCommand (0), + receiverOff (1), + receiverOn (2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Commands used to control the receiver, currently the receiver can + be switched on and off and the loopback option switched on and off." + ::= { aprisaXEReceiver 2 } + +aprisaXEReceiverSynthesiserStatus OBJECT-TYPE + SYNTAX FourRFAlarmStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The status of the receiver synthesiser." + ::= { aprisaXEReceiver 3 } + +aprisaXEReceiver12VPowerStatus OBJECT-TYPE + SYNTAX FourRFAlarmStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The status of the Receiver 12V power supply." + ::= { aprisaXEReceiver 4 } + +aprisaXEReceiverFrequency OBJECT-TYPE + SYNTAX FourRFFrequency + MAX-ACCESS read-write + STATUS current + DESCRIPTION "The terminal transmit frequency in MHz. The possible bands are: + 330 to 400 MHz (300 MHz) + 400 to 470 MHz (400 MHz) + 1350 to 1550 MHz (1400 MHz) + The frequency value should be supplied in Hz." + ::= { aprisaXEReceiver 5 } + +aprisaXEReceiverRSSI OBJECT-TYPE + SYNTAX FourRFRSSI + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The characterised RSSI Voltage." + ::= { aprisaXEReceiver 6 } + +aprisaXEReceiverTemperature OBJECT-TYPE + SYNTAX FourRFTemperature + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The temperature value, this should only be accessible in + engineering mode." + ::= { aprisaXEReceiver 8 } + +aprisaXEReceiverVTune OBJECT-TYPE + SYNTAX AprisaXEAdcVoltage + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "The voltage output from RX synth value, this should only be + accessible in engineering mode." + ::= { aprisaXEReceiver 9 } + +aprisaXEReceiver9VSupply OBJECT-TYPE + SYNTAX AprisaXEAdcVoltage + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "The 9V supply rail value, this should only be accessible in + engineering mode." + ::= { aprisaXEReceiver 10 } + +aprisaXEReceiver5VSupply OBJECT-TYPE + SYNTAX AprisaXEAdcVoltage + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "The 5V supply rail value, this should only be accessible in + engineering mode." + ::= { aprisaXEReceiver 11 } + +aprisaXEReceiverModemAGC OBJECT-TYPE + SYNTAX AprisaXEAdcVoltage + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "The modem AGC, this should only be accessible in + engineering mode." + ::= { aprisaXEReceiver 12 } + +aprisaXEReceiverNeg1V5Supply OBJECT-TYPE + SYNTAX AprisaXEAdcVoltage + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "The -1.5V supply rail value, this should only be accessible in + engineering mode." + ::= { aprisaXEReceiver 13 } + +aprisaXEReceiver3V3Supply OBJECT-TYPE + SYNTAX AprisaXEAdcVoltage + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "The 3.3V supply rail value, this should only be accessible in + engineering mode." + ::= { aprisaXEReceiver 14 } + +aprisaXEReceiverDacTest OBJECT-TYPE + SYNTAX AprisaXEAdcVoltage + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "The DacTest value, this should only be accessible in + engineering mode." + ::= { aprisaXEReceiver 15 } + +aprisaXEReceiverCharacterisationDataStatus OBJECT-TYPE + SYNTAX AprisaXEDataStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The status of the receiver characterisation data." + ::= { aprisaXEReceiver 16 } + +aprisaXEReceiverSerialNumber OBJECT-TYPE + SYNTAX FourRFSerialNumber + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The unique module serial number for the receiver." + ::= { aprisaXEReceiver 17 } + +aprisaXEReceiverRfLoopback OBJECT-TYPE + SYNTAX FourRFLoopback + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Enables and disabled RF loopback." + ::= { aprisaXEReceiver 18 } + +aprisaXEReceiverRfLoopbackTimeout OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION "The number of seconds after which RF loopback should timeout." + ::= { aprisaXEReceiver 19 } + +aprisaXEReceiverMibDataStatus OBJECT-TYPE + SYNTAX AprisaXEDataStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The status of the receiver MIB data." + ::= { aprisaXEReceiver 20 } + +aprisaXEReceiverADCChZero OBJECT-TYPE + SYNTAX AprisaXEAdcVoltage + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The RX adc ch zero voltage." + ::= { aprisaXEReceiver 21 } + +aprisaXEReceiverADCChOne OBJECT-TYPE + SYNTAX AprisaXEAdcVoltage + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The RX adc ch one voltage." + ::= { aprisaXEReceiver 22 } + +aprisaXEReceiverADCChTwo OBJECT-TYPE + SYNTAX AprisaXEAdcVoltage + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The RX adc ch two voltage." + ::= { aprisaXEReceiver 23 } + +aprisaXEReceiverADCChThree OBJECT-TYPE + SYNTAX AprisaXEAdcVoltage + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The RX adc ch three voltage." + ::= { aprisaXEReceiver 24 } + +aprisaXEReceiverADCChFour OBJECT-TYPE + SYNTAX AprisaXEAdcVoltage + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The RX adc ch four voltage." + ::= { aprisaXEReceiver 25 } + +aprisaXEReceiverADCChFive OBJECT-TYPE + SYNTAX AprisaXEAdcVoltage + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The RX adc ch five voltage." + ::= { aprisaXEReceiver 26 } + +aprisaXEReceiverADCChSix OBJECT-TYPE + SYNTAX AprisaXEAdcVoltage + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The RX adc ch six voltage." + ::= { aprisaXEReceiver 27 } + +aprisaXEReceiverADCChSeven OBJECT-TYPE + SYNTAX AprisaXEAdcVoltage + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The RX adc ch seven voltage." + ::= { aprisaXEReceiver 28 } + +aprisaXEReceiverADCChEight OBJECT-TYPE + SYNTAX AprisaXEAdcVoltage + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The RX adc ch eight voltage." + ::= { aprisaXEReceiver 29 } + +aprisaXEReceiverADCChNine OBJECT-TYPE + SYNTAX AprisaXEAdcVoltage + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The RX adc ch nine voltage." + ::= { aprisaXEReceiver 30 } + +aprisaXEReceiverADCChTen OBJECT-TYPE + SYNTAX AprisaXEAdcVoltage + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The RX adc ch ten voltage." + ::= { aprisaXEReceiver 31 } + +aprisaXEReceiverRSSIThresQPSKLowerOn OBJECT-TYPE + SYNTAX Integer32(-110..-40) + MAX-ACCESS read-write + STATUS current + DESCRIPTION "The QPSK Lower ON RSSI Threshold." + ::= { aprisaXEReceiver 32 } + +aprisaXEReceiverRSSIThres16QAMLowerOn OBJECT-TYPE + SYNTAX Integer32(-110..-40) + MAX-ACCESS read-write + STATUS current + DESCRIPTION "The 16QAM Lower ON RSSI Threshold." + ::= { aprisaXEReceiver 33 } + +aprisaXEReceiverRSSIThres32QAMLowerOn OBJECT-TYPE + SYNTAX Integer32(-110..-40) + MAX-ACCESS read-write + STATUS current + DESCRIPTION "The 32QAM Lower ON RSSI Threshold." + ::= { aprisaXEReceiver 34 } + +aprisaXEReceiverRSSIThres64QAMLowerOn OBJECT-TYPE + SYNTAX Integer32(-110..-40) + MAX-ACCESS read-write + STATUS current + DESCRIPTION "The 64QAM Lower ON RSSI Threshold." + ::= { aprisaXEReceiver 35 } + +aprisaXEReceiverSynthFileVersion OBJECT-TYPE + SYNTAX INTEGER ( 0..999 ) + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The version of the Synth File loaded from the filesystem." + ::= { aprisaXEReceiver 36 } + +aprisaXEReceiverOperationalDataVersion OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The version of the operational data of the receiver." + ::= { aprisaXEReceiver 37 } + +aprisaXEReceiverSwCompatibility OBJECT-TYPE + SYNTAX INTEGER ( 0..999 ) + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The receiver software compatibility number." + ::= { aprisaXEReceiver 38 } + +aprisaXETReceiverGroup OBJECT-GROUP + OBJECTS { aprisaXEReceiverStatus, + aprisaXEReceiverCommand, + aprisaXEReceiverSynthesiserStatus, + aprisaXEReceiver12VPowerStatus, + aprisaXEReceiverFrequency, + aprisaXEReceiverRSSI, + aprisaXEReceiverTemperature, + aprisaXEReceiverVTune, + aprisaXEReceiver9VSupply, + aprisaXEReceiver5VSupply, + aprisaXEReceiverModemAGC, + aprisaXEReceiverNeg1V5Supply, + aprisaXEReceiver3V3Supply, + aprisaXEReceiverDacTest, + aprisaXEReceiverCharacterisationDataStatus, + aprisaXEReceiverSerialNumber, + aprisaXEReceiverRfLoopback, + aprisaXEReceiverRfLoopbackTimeout, + aprisaXEReceiverMibDataStatus, + aprisaXEReceiverADCChZero, + aprisaXEReceiverADCChOne, + aprisaXEReceiverADCChTwo, + aprisaXEReceiverADCChThree, + aprisaXEReceiverADCChFour, + aprisaXEReceiverADCChFive, + aprisaXEReceiverADCChSix, + aprisaXEReceiverADCChSeven, + aprisaXEReceiverADCChEight, + aprisaXEReceiverADCChNine, + aprisaXEReceiverADCChTen, + aprisaXEReceiverRSSIThresQPSKLowerOn, + aprisaXEReceiverRSSIThres16QAMLowerOn, + aprisaXEReceiverRSSIThres32QAMLowerOn, + aprisaXEReceiverRSSIThres64QAMLowerOn, + aprisaXEReceiverSynthFileVersion + } + STATUS current + DESCRIPTION "The AprisaXE Receiver settings group." + ::= { aprisaXEGroups 46 } + +-- *************************************************************************** +-- End Receiver +-- *************************************************************************** + + + +-- *************************************************************************** +-- Modem - there is only one Modem for each AprisaXE +-- +-- NB: The units for all fields need to be confirmed +-- +-- *************************************************************************** + +aprisaXEModem OBJECT IDENTIFIER ::= { aprisaXEObjects 61 } + +aprisaXEModemDemodAligmentStatus OBJECT-TYPE + SYNTAX FourRFAlarmStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Status of the demodulator alignment." + ::= { aprisaXEModem 1 } + +aprisaXEModemTdmAligmentStatus OBJECT-TYPE + SYNTAX FourRFAlarmStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Status of the TDM alignment." + ::= { aprisaXEModem 2 } + +aprisaXEModemRefAStatus OBJECT-TYPE + SYNTAX FourRFAlarmStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Status of the REFa clock." + ::= { aprisaXEModem 3 } + +aprisaXEModemRefBStatus OBJECT-TYPE + SYNTAX FourRFAlarmStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Status of the REFb clock." + ::= { aprisaXEModem 4 } + +aprisaXEModemUncorrectableBlockCount OBJECT-TYPE + SYNTAX FourRFErrorCounter + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Count of uncorrectable blocks since last read." + ::= { aprisaXEModem 5 } + +aprisaXEModemIQData OBJECT-TYPE + SYNTAX AprisaXEIQData + MAX-ACCESS read-only + STATUS current + DESCRIPTION "A list of I/Q data pairs, this is a sequence of byes values + the first byte is an I value, the second a Q value." + ::= { aprisaXEModem 6 } + +aprisaXEModemSyncStatus OBJECT-TYPE + SYNTAX FourRFAlarmStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Status of the link lock." + ::= { aprisaXEModem 7 } + +aprisaXEModemFreqOffsetEnable OBJECT-TYPE + SYNTAX INTEGER { offsetDisabled (0), + offsetEnabled (1) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Turn the Modulator frequency offset of 50kHz on or off." + ::= { aprisaXEModem 8 } + +aprisaXEModemInterleaverEnable OBJECT-TYPE + SYNTAX INTEGER { interleaverEnabled (100), + interleaverDisabled (101), + interleaverDefault (102) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Interleaver being used on the modem. Trade off + between link latency and FEC performance." + ::= { aprisaXEModem 9 } + +aprisaXEModemQPSKCoding OBJECT-TYPE + SYNTAX INTEGER { grayCoded (0), + nonGrayCoded (1) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Encoding and Decoding being used for QPSK. Can be either + Gray coded or non Gray coded." + ::= { aprisaXEModem 10 } + +aprisaXEModemConfigVersion OBJECT-TYPE + SYNTAX INTEGER ( 0..999 ) + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Modem Configuration file version." + ::= { aprisaXEModem 11 } + +aprisaXEModemGroup OBJECT-GROUP + OBJECTS { aprisaXEModemDemodAligmentStatus, + aprisaXEModemTdmAligmentStatus, + aprisaXEModemRefAStatus, + aprisaXEModemRefBStatus, + aprisaXEModemUncorrectableBlockCount, + aprisaXEModemIQData, + aprisaXEModemSyncStatus, + aprisaXEModemFreqOffsetEnable, + aprisaXEModemInterleaverEnable, + aprisaXEModemQPSKCoding, + aprisaXEModemConfigVersion + } + STATUS current + DESCRIPTION "The AprisaXE Modem settings group." + ::= { aprisaXEGroups 53 } + +-- *************************************************************************** +-- End Modem +-- *************************************************************************** + + + +-- *************************************************************************** +-- BoardTable - Table for storing basic per slot details. +-- *************************************************************************** + +aprisaXEBoardTable OBJECT-TYPE + SYNTAX SEQUENCE OF AprisaXEBoardEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "This table stores the basic information for the plugin slots." + ::= { aprisaXEObjects 66 } + +aprisaXEBoardEntry OBJECT-TYPE + SYNTAX AprisaXEBoardEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "Slot Information." + INDEX { aprisaXEBoardSlot } + ::= { aprisaXEBoardTable 1 } + +-- Each table entry consists of the type of the card in the slot, +-- the hardware and firmware version numbers and the hardware software +-- compatibility number. + +AprisaXEBoardEntry ::= SEQUENCE { + aprisaXEBoardSlot INTEGER, + aprisaXEBoardType INTEGER, + aprisaXEExpectedBoardType INTEGER, + aprisaXEBoardHardwareVersion INTEGER, + aprisaXEBoardFirmwareVersion INTEGER, + aprisaXEBoardHSCNumber INTEGER, + aprisaXEBoardSerialNumber OCTET STRING + } + +aprisaXEBoardSlot OBJECT-TYPE + SYNTAX AprisaXESlotNumber + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The slot number in which the board resides, the physical slots are + numbered from zero to ten and mapped to one to eleven in the MIB. + The motherboard is therefore in physical slot 0 but MIB slot 1." + ::= { aprisaXEBoardEntry 1 } + +aprisaXEBoardType OBJECT-TYPE + SYNTAX AprisaXECardType + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The type of the board in the slot. The types are as follows: + - none : there is no card in the slot + - modem : this card will be fitted in physical slot 0 + - transmitter : the transmitter card, this will be in physical slot 9 + - receiver : the receiver card, this will be in physical slot 10 + - quadJET : e1/t1 4 port card" + ::= { aprisaXEBoardEntry 2 } + +aprisaXEExpectedBoardType OBJECT-TYPE + SYNTAX AprisaXECardType + MAX-ACCESS read-write + STATUS current + DESCRIPTION "The type of the board expected in the slot. The types are as follows: + - none : there is no card in the slot + - modem : this card will be fitted in physical slot 0 + - transmitter : the transmitter card, this will be in physical slot 9 + - receiver : the receiver card, this will be in physical slot 10 + - quadJET : e1/t1 4 port card" + ::= { aprisaXEBoardEntry 3 } + +aprisaXEBoardHardwareVersion OBJECT-TYPE + SYNTAX AprisaXEHardwareVersion + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Field indicating the hardware version for the board in the slot." + ::= { aprisaXEBoardEntry 4 } + +aprisaXEBoardFirmwareVersion OBJECT-TYPE + SYNTAX AprisaXEHardwareVersion + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Field indicating the firmware version for the board in the slot." + ::= { aprisaXEBoardEntry 5 } + +aprisaXEBoardHSCNumber OBJECT-TYPE + SYNTAX AprisaXEHardwareVersion + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Field indicating the hardware software configuration number + for the board in the slot." + ::= { aprisaXEBoardEntry 6 } + +aprisaXEBoardSerialNumber OBJECT-TYPE + SYNTAX FourRFSerialNumber + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Field indicating the module serial number for the card in the slot." + ::= { aprisaXEBoardEntry 7 } + +-- *************************************************************************** +-- End BoardTable +-- *************************************************************************** + + + +-- *************************************************************************** +-- Alarms - notifications should be defined for each alarm. +-- +-- Each alarm has at least three components: +-- Its current status noAlarm or alarmPresent indicating whether the alarm +-- is present or not. +-- +-- The alarm severity indicating whether the alarm is major or minor (or +-- anything else we want) +-- +-- A flag indicating whether the alarm is enabled +-- (all alarms are enabled by default) +-- +-- Currently all objects are read-only and would be configured from the +-- MIB configuration at startup it is possible to allow the user to change +-- the severity and to enable and disable alarms if this is considered useful. +-- +-- *************************************************************************** + +aprisaXELinkAlarms OBJECT IDENTIFIER ::= { aprisaXEObjects 86 } + +-- *************************************************************************** +-- The Transmitter Alarms +-- *************************************************************************** + +aprisaXETransmitterAlarms OBJECT IDENTIFIER ::= { aprisaXELinkAlarms 1 } + + +-- +-- Forward Power High Alarm +-- +-- This is a minor alarm +-- + +aprisaXEForwardPowerHiAlarm OBJECT IDENTIFIER ::= { aprisaXETransmitterAlarms 1 } + +aprisaXEForwardPowerHiAlarmStatus OBJECT-TYPE + SYNTAX FourRFAlarmStatus + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "The status of the forward power too high alarm." + ::= { aprisaXEForwardPowerHiAlarm 1 } + +aprisaXEForwardPowerHiAlarmSeverity OBJECT-TYPE + SYNTAX FourRFAlarmSeverity + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "The severity of the forward power too high alarm." + ::= { aprisaXEForwardPowerHiAlarm 2 } + +aprisaXEForwardPowerHiAlarmEnabled OBJECT-TYPE + SYNTAX FourRFAlarmEnabled + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "Indicates whether the forward power too high alarm is enabled." + ::= { aprisaXEForwardPowerHiAlarm 3 } + +aprisaXEForwardPowerHiAlarmThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "Indicates the level at which the forward power too high + alarm will be set." + ::= { aprisaXEForwardPowerHiAlarm 4 } + +aprisaXEForwardPowerHiAlarmClearThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "Indicates the level at which the forward power alarm + will be cleared." + ::= { aprisaXEForwardPowerHiAlarm 5 } + +aprisaXEForwardPowerHiAlarmsGroup OBJECT-GROUP + OBJECTS { aprisaXEForwardPowerHiAlarmStatus, + aprisaXEForwardPowerHiAlarmSeverity, + aprisaXEForwardPowerHiAlarmEnabled, + aprisaXEForwardPowerHiAlarmThreshold, + aprisaXEForwardPowerHiAlarmClearThreshold + } + STATUS obsolete + DESCRIPTION "The AprisaXE forward power too high alarm group." + ::= { aprisaXEGroups 56 } + + +-- +-- Forward Power Low Alarm +-- +-- This is a minor alarm +-- + +aprisaXEForwardPowerLoAlarm OBJECT IDENTIFIER ::= { aprisaXETransmitterAlarms 2 } + +aprisaXEForwardPowerLoAlarmStatus OBJECT-TYPE + SYNTAX FourRFAlarmStatus + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "The status of the forward power too low alarm." + ::= { aprisaXEForwardPowerLoAlarm 1 } + +aprisaXEForwardPowerLoAlarmSeverity OBJECT-TYPE + SYNTAX FourRFAlarmSeverity + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "The severity of the forward power too low alarm." + ::= { aprisaXEForwardPowerLoAlarm 2 } + +aprisaXEForwardPowerLoAlarmEnabled OBJECT-TYPE + SYNTAX FourRFAlarmEnabled + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "Indicates whether the forward power too low alarm is enabled." + ::= { aprisaXEForwardPowerLoAlarm 3 } + +aprisaXEForwardPowerLoAlarmThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "Indicates the level at which the forward power too low alarm + will be set." + ::= { aprisaXEForwardPowerLoAlarm 4 } + +aprisaXEForwardPowerLoAlarmClearThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "Indicates the level at which the forward power too low alarm + will be cleared." + ::= { aprisaXEForwardPowerLoAlarm 5 } + +aprisaXEForwardPowerLoAlarmsGroup OBJECT-GROUP + OBJECTS { aprisaXEForwardPowerLoAlarmStatus, + aprisaXEForwardPowerLoAlarmSeverity, + aprisaXEForwardPowerLoAlarmEnabled, + aprisaXEForwardPowerLoAlarmThreshold, + aprisaXEForwardPowerLoAlarmClearThreshold + } + STATUS obsolete + DESCRIPTION "The AprisaXE forward power low alarm group." + ::= { aprisaXEGroups 61 } + + +-- +-- Reverse Power Too High Alarm +-- + +aprisaXEReversePowerHiAlarm OBJECT IDENTIFIER ::= { aprisaXETransmitterAlarms 3 } + +aprisaXEReversePowerHiAlarmStatus OBJECT-TYPE + SYNTAX FourRFAlarmStatus + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "The status of the reverse power out of limits alarm." + ::= { aprisaXEReversePowerHiAlarm 1 } + +aprisaXEReversePowerHiAlarmSeverity OBJECT-TYPE + SYNTAX FourRFAlarmSeverity + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "The severity of the reverse power out of limits alarm." + ::= { aprisaXEReversePowerHiAlarm 2 } + +aprisaXEReversePowerHiAlarmEnabled OBJECT-TYPE + SYNTAX FourRFAlarmEnabled + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "Indicates whether the reverse power out of limits alarm is enabled." + ::= { aprisaXEReversePowerHiAlarm 3 } + +aprisaXEReversePowerHiAlarmThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "Indicates the level at which the reverse power alarm will be set." + ::= { aprisaXEReversePowerHiAlarm 4 } + +aprisaXEReversePowerHiAlarmClearThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "Indicates the level at which the reverse power alarm will be cleared." + ::= { aprisaXEReversePowerHiAlarm 5 } + +aprisaXEReversePowerHiAlarmsGroup OBJECT-GROUP + OBJECTS { aprisaXEReversePowerHiAlarmStatus, + aprisaXEReversePowerHiAlarmSeverity, + aprisaXEReversePowerHiAlarmEnabled, + aprisaXEReversePowerHiAlarmThreshold, + aprisaXEReversePowerHiAlarmClearThreshold + } + STATUS obsolete + DESCRIPTION "The AprisaXE reverse power too high alarm group." + ::= { aprisaXEGroups 66 } + + +-- +-- Reverse Power Too Low Alarm +-- + +aprisaXEReversePowerLoAlarm OBJECT IDENTIFIER ::= { aprisaXETransmitterAlarms 4 } + +aprisaXEReversePowerLoAlarmStatus OBJECT-TYPE + SYNTAX FourRFAlarmStatus + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "The status of the reverse power out of limits alarm." + ::= { aprisaXEReversePowerLoAlarm 1 } + +aprisaXEReversePowerLoAlarmSeverity OBJECT-TYPE + SYNTAX FourRFAlarmSeverity + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "The severity of the reverse power out of limits alarm." + ::= { aprisaXEReversePowerLoAlarm 2 } + +aprisaXEReversePowerLoAlarmEnabled OBJECT-TYPE + SYNTAX FourRFAlarmEnabled + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "Indicates whether the reverse power out of limits alarm is enabled." + ::= { aprisaXEReversePowerLoAlarm 3 } + +aprisaXEReversePowerLoAlarmThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "Indicates the level at which the reverse power alarm will be set." + ::= { aprisaXEReversePowerLoAlarm 4 } + +aprisaXEReversePowerLoAlarmClearThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "Indicates the level at which the reverse power alarm will be cleared." + ::= { aprisaXEReversePowerLoAlarm 5 } + +aprisaXEReversePowerLoAlarmsGroup OBJECT-GROUP + OBJECTS { aprisaXEReversePowerLoAlarmStatus, + aprisaXEReversePowerLoAlarmSeverity, + aprisaXEReversePowerLoAlarmEnabled, + aprisaXEReversePowerLoAlarmThreshold, + aprisaXEReversePowerLoAlarmClearThreshold + } + STATUS obsolete + DESCRIPTION "The AprisaXE reverse power too low alarm group." + ::= { aprisaXEGroups 71 } + + +-- +-- Transmitter PA Temperature Alarm +-- +-- This alarm is raised when the transmitter temperature exceeds a defined +-- threshold. This is a major alarm as the transmitter will be switched off +-- when this alarm is present. +-- + +aprisaXETxPaTempAlarm OBJECT IDENTIFIER ::= { aprisaXETransmitterAlarms 5 } + +aprisaXETxPaTempAlarmStatus OBJECT-TYPE + SYNTAX FourRFAlarmStatus + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "The status of the transmitter temperature too high alarm." + ::= { aprisaXETxPaTempAlarm 1 } + +aprisaXETxPaTempAlarmSeverity OBJECT-TYPE + SYNTAX FourRFAlarmSeverity + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "The severity of the transmitter temperature too high alarm." + ::= { aprisaXETxPaTempAlarm 2 } + +aprisaXETxPaTempAlarmEnabled OBJECT-TYPE + SYNTAX FourRFAlarmEnabled + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "Indicates whether the transmitter temperature too high alarm is enabled." + ::= { aprisaXETxPaTempAlarm 3 } + +aprisaXETxPaTempAlarmThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "Indicates the level at which the transmitter temperature too high + alarm will be set." + ::= { aprisaXETxPaTempAlarm 4 } + +aprisaXETxPaTempAlarmClearThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "Indicates the level at which the transmitter temperature too high + will be cleared." + ::= { aprisaXETxPaTempAlarm 5 } + +aprisaXETxPaTempAlarmsGroup OBJECT-GROUP + OBJECTS { aprisaXETxPaTempAlarmStatus, + aprisaXETxPaTempAlarmSeverity, + aprisaXETxPaTempAlarmEnabled, + aprisaXETxPaTempAlarmThreshold, + aprisaXETxPaTempAlarmClearThreshold + } + STATUS obsolete + DESCRIPTION "The AprisaXE transmitter temperature too high alarm group." + ::= { aprisaXEGroups 76 } + + +aprisaXETxPaTempWarnAlarm OBJECT IDENTIFIER ::= { aprisaXETransmitterAlarms 6 } + +aprisaXETxPaTempWarnAlarmStatus OBJECT-TYPE + SYNTAX FourRFAlarmStatus + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "The status of the transmitter temperature warning alarm." + ::= { aprisaXETxPaTempWarnAlarm 1 } + +aprisaXETxPaTempWarnAlarmSeverity OBJECT-TYPE + SYNTAX FourRFAlarmSeverity + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "The severity of the transmitter temperature warning alarm." + ::= { aprisaXETxPaTempWarnAlarm 2 } + +aprisaXETxPaTempWarnAlarmEnabled OBJECT-TYPE + SYNTAX FourRFAlarmEnabled + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "Indicates whether the transmitter temperature warning alarm is enabled." + ::= { aprisaXETxPaTempWarnAlarm 3 } + +aprisaXETxPaTempWarnAlarmThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "Indicates the level at which the transmitter temperature warning + alarm will be set." + ::= { aprisaXETxPaTempWarnAlarm 4 } + +aprisaXETxPaTempWarnAlarmClearThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "Indicates the level at which the transmitter temperature warning + will be cleared." + ::= { aprisaXETxPaTempWarnAlarm 5 } + +aprisaXETxPaTempWarnAlarmsGroup OBJECT-GROUP + OBJECTS { aprisaXETxPaTempWarnAlarmStatus, + aprisaXETxPaTempWarnAlarmSeverity, + aprisaXETxPaTempWarnAlarmEnabled, + aprisaXETxPaTempWarnAlarmThreshold, + aprisaXETxPaTempWarnAlarmClearThreshold + } + STATUS obsolete + DESCRIPTION "The AprisaXE transmitter temperature warning alarm group." + ::= { aprisaXEGroups 81 } + + +aprisaXETxAgcHiAlarm OBJECT IDENTIFIER ::= { aprisaXETransmitterAlarms 7 } + +aprisaXETxAgcHiAlarmStatus OBJECT-TYPE + SYNTAX FourRFAlarmStatus + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "The status of the transmitter AGC too high alarm." + ::= { aprisaXETxAgcHiAlarm 1 } + +aprisaXETxAgcHiAlarmSeverity OBJECT-TYPE + SYNTAX FourRFAlarmSeverity + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "The severity of the transmitter AGC too high alarm." + ::= { aprisaXETxAgcHiAlarm 2 } + +aprisaXETxAgcHiAlarmEnabled OBJECT-TYPE + SYNTAX FourRFAlarmEnabled + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "Indicates whether the transmitter AGC too high alarm is enabled." + ::= { aprisaXETxAgcHiAlarm 3 } + +aprisaXETxAgcHiAlarmThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "Indicates the level at which the transmitter AGC too high + alarm will be set." + ::= { aprisaXETxAgcHiAlarm 4 } + +aprisaXETxAgcHiAlarmClearThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "Indicates the level at which the transmitter AGC too high + will be cleared." + ::= { aprisaXETxAgcHiAlarm 5 } + +aprisaXETxAgcHiAlarmsGroup OBJECT-GROUP + OBJECTS { aprisaXETxAgcHiAlarmStatus, + aprisaXETxAgcHiAlarmSeverity, + aprisaXETxAgcHiAlarmEnabled, + aprisaXETxAgcHiAlarmThreshold, + aprisaXETxAgcHiAlarmClearThreshold + } + STATUS obsolete + DESCRIPTION "The AprisaXE transmitter AGC too high alarm group." + ::= { aprisaXEGroups 86 } + + +aprisaXETxAgcLoAlarm OBJECT IDENTIFIER ::= { aprisaXETransmitterAlarms 8 } + +aprisaXETxAgcLoAlarmStatus OBJECT-TYPE + SYNTAX FourRFAlarmStatus + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "The status of the transmitter AGC too low alarm." + ::= { aprisaXETxAgcLoAlarm 1 } + +aprisaXETxAgcLoAlarmSeverity OBJECT-TYPE + SYNTAX FourRFAlarmSeverity + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "The severity of the transmitter AGC too low alarm." + ::= { aprisaXETxAgcLoAlarm 2 } + +aprisaXETxAgcLoAlarmEnabled OBJECT-TYPE + SYNTAX FourRFAlarmEnabled + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "Indicates whether the transmitter AGC too low alarm is enabled." + ::= { aprisaXETxAgcLoAlarm 3 } + +aprisaXETxAgcLoAlarmThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "Indicates the level at which the transmitter AGC too low + alarm will be set." + ::= { aprisaXETxAgcLoAlarm 4 } + +aprisaXETxAgcLoAlarmClearThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "Indicates the level at which the transmitter AGC too low + will be cleared." + ::= { aprisaXETxAgcLoAlarm 5 } + +aprisaXETxAgcLoAlarmsGroup OBJECT-GROUP + OBJECTS { aprisaXETxAgcLoAlarmStatus, + aprisaXETxAgcLoAlarmSeverity, + aprisaXETxAgcLoAlarmEnabled, + aprisaXETxAgcLoAlarmThreshold, + aprisaXETxAgcLoAlarmClearThreshold + } + STATUS obsolete + DESCRIPTION "The AprisaXE transmitter AGC too low alarm group." + ::= { aprisaXEGroups 91 } + + +aprisaXETxVtuneHiAlarm OBJECT IDENTIFIER ::= { aprisaXETransmitterAlarms 9 } + +aprisaXETxVtuneHiAlarmStatus OBJECT-TYPE + SYNTAX FourRFAlarmStatus + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "The status of the transmitter VTUNE too high alarm." + ::= { aprisaXETxVtuneHiAlarm 1 } + +aprisaXETxVtuneHiAlarmSeverity OBJECT-TYPE + SYNTAX FourRFAlarmSeverity + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "The severity of the transmitter VTUNE too high alarm." + ::= { aprisaXETxVtuneHiAlarm 2 } + +aprisaXETxVtuneHiAlarmEnabled OBJECT-TYPE + SYNTAX FourRFAlarmEnabled + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "Indicates whether the transmitter VTUNE too high alarm is enabled." + ::= { aprisaXETxVtuneHiAlarm 3 } + +aprisaXETxVtuneHiAlarmThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "Indicates the level at which the transmitter VTUNE too high + alarm will be set." + ::= { aprisaXETxVtuneHiAlarm 4 } + +aprisaXETxVtuneHiAlarmClearThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "Indicates the level at which the transmitter VTUNE too high + will be cleared." + ::= { aprisaXETxVtuneHiAlarm 5 } + +aprisaXETxVtuneHiAlarmsGroup OBJECT-GROUP + OBJECTS { aprisaXETxVtuneHiAlarmStatus, + aprisaXETxVtuneHiAlarmSeverity, + aprisaXETxVtuneHiAlarmEnabled, + aprisaXETxVtuneHiAlarmThreshold, + aprisaXETxVtuneHiAlarmClearThreshold + } + STATUS obsolete + DESCRIPTION "The AprisaXE transmitter VTUNE too high alarm group." + ::= { aprisaXEGroups 96 } + + +aprisaXETxVtuneLoAlarm OBJECT IDENTIFIER ::= { aprisaXETransmitterAlarms 10 } + +aprisaXETxVtuneLoAlarmStatus OBJECT-TYPE + SYNTAX FourRFAlarmStatus + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "The status of the transmitter VTUNE too low alarm." + ::= { aprisaXETxVtuneLoAlarm 1 } + +aprisaXETxVtuneLoAlarmSeverity OBJECT-TYPE + SYNTAX FourRFAlarmSeverity + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "The severity of the transmitter VTUNE too low alarm." + ::= { aprisaXETxVtuneLoAlarm 2 } + +aprisaXETxVtuneLoAlarmEnabled OBJECT-TYPE + SYNTAX FourRFAlarmEnabled + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "Indicates whether the transmitter VTUNE too low alarm is enabled." + ::= { aprisaXETxVtuneLoAlarm 3 } + +aprisaXETxVtuneLoAlarmThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "Indicates the level at which the transmitter VTUNE too low + alarm will be set." + ::= { aprisaXETxVtuneLoAlarm 4 } + +aprisaXETxVtuneLoAlarmClearThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "Indicates the level at which the transmitter VTUNE too low + will be cleared." + ::= { aprisaXETxVtuneLoAlarm 5 } + +aprisaXETxVtuneLoAlarmsGroup OBJECT-GROUP + OBJECTS { aprisaXETxVtuneLoAlarmStatus, + aprisaXETxVtuneLoAlarmSeverity, + aprisaXETxVtuneLoAlarmEnabled, + aprisaXETxVtuneLoAlarmThreshold, + aprisaXETxVtuneLoAlarmClearThreshold + } + STATUS obsolete + DESCRIPTION "The AprisaXE transmitter VTUNE too low alarm group." + ::= { aprisaXEGroups 101 } + + +aprisaXETx5VDigHiAlarm OBJECT IDENTIFIER ::= { aprisaXETransmitterAlarms 11 } + +aprisaXETx5VDigHiAlarmStatus OBJECT-TYPE + SYNTAX FourRFAlarmStatus + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "The status of the transmitter 5V digital voltage too high alarm." + ::= { aprisaXETx5VDigHiAlarm 1 } + +aprisaXETx5VDigHiAlarmSeverity OBJECT-TYPE + SYNTAX FourRFAlarmSeverity + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "The severity of the transmitter 5V digital voltage too high alarm." + ::= { aprisaXETx5VDigHiAlarm 2 } + +aprisaXETx5VDigHiAlarmEnabled OBJECT-TYPE + SYNTAX FourRFAlarmEnabled + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "Indicates whether the transmitter 5V digital voltage too high alarm is enabled." + ::= { aprisaXETx5VDigHiAlarm 3 } + +aprisaXETx5VDigHiAlarmThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "Indicates the level at which the transmitter 5V digital voltage too high + alarm will be set." + ::= { aprisaXETx5VDigHiAlarm 4 } + +aprisaXETx5VDigHiAlarmClearThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "Indicates the level at which the transmitter 5V digital voltage too high + will be cleared." + ::= { aprisaXETx5VDigHiAlarm 5 } + +aprisaXETx5VDigHiAlarmsGroup OBJECT-GROUP + OBJECTS { aprisaXETx5VDigHiAlarmStatus, + aprisaXETx5VDigHiAlarmSeverity, + aprisaXETx5VDigHiAlarmEnabled, + aprisaXETx5VDigHiAlarmThreshold, + aprisaXETx5VDigHiAlarmClearThreshold + } + STATUS obsolete + DESCRIPTION "The AprisaXE transmitter 5V digital voltage too high alarm group." + ::= { aprisaXEGroups 106 } + + +aprisaXETx5VDigLoAlarm OBJECT IDENTIFIER ::= { aprisaXETransmitterAlarms 12 } + +aprisaXETx5VDigLoAlarmStatus OBJECT-TYPE + SYNTAX FourRFAlarmStatus + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "The status of the transmitter 5V digital voltage too low alarm." + ::= { aprisaXETx5VDigLoAlarm 1 } + +aprisaXETx5VDigLoAlarmSeverity OBJECT-TYPE + SYNTAX FourRFAlarmSeverity + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "The severity of the transmitter 5V digital voltage too low alarm." + ::= { aprisaXETx5VDigLoAlarm 2 } + +aprisaXETx5VDigLoAlarmEnabled OBJECT-TYPE + SYNTAX FourRFAlarmEnabled + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "Indicates whether the transmitter 5V digital voltage too low alarm is enabled." + ::= { aprisaXETx5VDigLoAlarm 3 } + +aprisaXETx5VDigLoAlarmThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "Indicates the level at which the transmitter 5V digital voltage too low + alarm will be set." + ::= { aprisaXETx5VDigLoAlarm 4 } + +aprisaXETx5VDigLoAlarmClearThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "Indicates the level at which the transmitter 5V digital voltage too low + will be cleared." + ::= { aprisaXETx5VDigLoAlarm 5 } + +aprisaXETx5VDigLoAlarmsGroup OBJECT-GROUP + OBJECTS { aprisaXETx5VDigLoAlarmStatus, + aprisaXETx5VDigLoAlarmSeverity, + aprisaXETx5VDigLoAlarmEnabled, + aprisaXETx5VDigLoAlarmThreshold, + aprisaXETx5VDigLoAlarmClearThreshold + } + STATUS obsolete + DESCRIPTION "The AprisaXE transmitter 5V digital voltage too low alarm group." + ::= { aprisaXEGroups 111 } + + +aprisaXETx7VRfHiAlarm OBJECT IDENTIFIER ::= { aprisaXETransmitterAlarms 13 } + +aprisaXETx7VRfHiAlarmStatus OBJECT-TYPE + SYNTAX FourRFAlarmStatus + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "The status of the transmitter 7V RF voltage too high alarm." + ::= { aprisaXETx7VRfHiAlarm 1 } + +aprisaXETx7VRfHiAlarmSeverity OBJECT-TYPE + SYNTAX FourRFAlarmSeverity + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "The severity of the transmitter 7V RF voltage too high alarm." + ::= { aprisaXETx7VRfHiAlarm 2 } + +aprisaXETx7VRfHiAlarmEnabled OBJECT-TYPE + SYNTAX FourRFAlarmEnabled + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "Indicates whether the transmitter 7V RF voltage too high alarm is enabled." + ::= { aprisaXETx7VRfHiAlarm 3 } + +aprisaXETx7VRfHiAlarmThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "Indicates the level at which the transmitter 7V RF voltage too high + alarm will be set." + ::= { aprisaXETx7VRfHiAlarm 4 } + +aprisaXETx7VRfHiAlarmClearThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "Indicates the level at which the transmitter 7V RF voltage too high + will be cleared." + ::= { aprisaXETx7VRfHiAlarm 5 } + +aprisaXETx7VRfHiAlarmsGroup OBJECT-GROUP + OBJECTS { aprisaXETx7VRfHiAlarmStatus, + aprisaXETx7VRfHiAlarmSeverity, + aprisaXETx7VRfHiAlarmEnabled, + aprisaXETx7VRfHiAlarmThreshold, + aprisaXETx7VRfHiAlarmClearThreshold + } + STATUS obsolete + DESCRIPTION "The AprisaXE transmitter 7V RF voltage too high alarm group." + ::= { aprisaXEGroups 116 } + + +aprisaXETx7VRfLoAlarm OBJECT IDENTIFIER ::= { aprisaXETransmitterAlarms 14 } + +aprisaXETx7VRfLoAlarmStatus OBJECT-TYPE + SYNTAX FourRFAlarmStatus + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "The status of the transmitter 7V RF voltage too low alarm." + ::= { aprisaXETx7VRfLoAlarm 1 } + +aprisaXETx7VRfLoAlarmSeverity OBJECT-TYPE + SYNTAX FourRFAlarmSeverity + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "The severity of the transmitter 7V RF voltage too low alarm." + ::= { aprisaXETx7VRfLoAlarm 2 } + +aprisaXETx7VRfLoAlarmEnabled OBJECT-TYPE + SYNTAX FourRFAlarmEnabled + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "Indicates whether the transmitter 7V RF voltage too low alarm is enabled." + ::= { aprisaXETx7VRfLoAlarm 3 } + +aprisaXETx7VRfLoAlarmThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "Indicates the level at which the transmitter 7V RF voltage too low + alarm will be set." + ::= { aprisaXETx7VRfLoAlarm 4 } + +aprisaXETx7VRfLoAlarmClearThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "Indicates the level at which the transmitter 7V RF voltage too low + will be cleared." + ::= { aprisaXETx7VRfLoAlarm 5 } + +aprisaXETx7VRfLoAlarmsGroup OBJECT-GROUP + OBJECTS { aprisaXETx7VRfLoAlarmStatus, + aprisaXETx7VRfLoAlarmSeverity, + aprisaXETx7VRfLoAlarmEnabled, + aprisaXETx7VRfLoAlarmThreshold, + aprisaXETx7VRfLoAlarmClearThreshold + } + STATUS obsolete + DESCRIPTION "The AprisaXE transmitter 7V RF voltage too low alarm group." + ::= { aprisaXEGroups 121 } + + +aprisaXETx9VHiAlarm OBJECT IDENTIFIER ::= { aprisaXETransmitterAlarms 15 } + +aprisaXETx9VHiAlarmStatus OBJECT-TYPE + SYNTAX FourRFAlarmStatus + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "The status of the transmitter 9V voltage too high alarm." + ::= { aprisaXETx9VHiAlarm 1 } + +aprisaXETx9VHiAlarmSeverity OBJECT-TYPE + SYNTAX FourRFAlarmSeverity + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "The severity of the transmitter 9V voltage too high alarm." + ::= { aprisaXETx9VHiAlarm 2 } + +aprisaXETx9VHiAlarmEnabled OBJECT-TYPE + SYNTAX FourRFAlarmEnabled + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "Indicates whether the transmitter 9V voltage too high alarm is enabled." + ::= { aprisaXETx9VHiAlarm 3 } + +aprisaXETx9VHiAlarmThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "Indicates the level at which the transmitter 9V voltage too high + alarm will be set." + ::= { aprisaXETx9VHiAlarm 4 } + +aprisaXETx9VHiAlarmClearThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "Indicates the level at which the transmitter 9V voltage too high + will be cleared." + ::= { aprisaXETx9VHiAlarm 5 } + +aprisaXETx9VHiAlarmsGroup OBJECT-GROUP + OBJECTS { aprisaXETx9VHiAlarmStatus, + aprisaXETx9VHiAlarmSeverity, + aprisaXETx9VHiAlarmEnabled, + aprisaXETx9VHiAlarmThreshold, + aprisaXETx9VHiAlarmClearThreshold + } + STATUS obsolete + DESCRIPTION "The AprisaXE transmitter 9V voltage too high alarm group." + ::= { aprisaXEGroups 126 } + + +aprisaXETx9VLoAlarm OBJECT IDENTIFIER ::= { aprisaXETransmitterAlarms 16 } + +aprisaXETx9VLoAlarmStatus OBJECT-TYPE + SYNTAX FourRFAlarmStatus + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "The status of the transmitter 9V voltage too low alarm." + ::= { aprisaXETx9VLoAlarm 1 } + +aprisaXETx9VLoAlarmSeverity OBJECT-TYPE + SYNTAX FourRFAlarmSeverity + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "The severity of the transmitter 9V voltage too low alarm." + ::= { aprisaXETx9VLoAlarm 2 } + +aprisaXETx9VLoAlarmEnabled OBJECT-TYPE + SYNTAX FourRFAlarmEnabled + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "Indicates whether the transmitter 9V voltage too low alarm is enabled." + ::= { aprisaXETx9VLoAlarm 3 } + +aprisaXETx9VLoAlarmThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "Indicates the level at which the transmitter 9V voltage too low + alarm will be set." + ::= { aprisaXETx9VLoAlarm 4 } + +aprisaXETx9VLoAlarmClearThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "Indicates the level at which the transmitter 9V voltage too low + will be cleared." + ::= { aprisaXETx9VLoAlarm 5 } + +aprisaXETx9VLoAlarmsGroup OBJECT-GROUP + OBJECTS { aprisaXETx9VLoAlarmStatus, + aprisaXETx9VLoAlarmSeverity, + aprisaXETx9VLoAlarmEnabled, + aprisaXETx9VLoAlarmThreshold, + aprisaXETx9VLoAlarmClearThreshold + } + STATUS obsolete + DESCRIPTION "The AprisaXE transmitter 9V voltage too low alarm group." + ::= { aprisaXEGroups 131 } + + +aprisaXETx11VHiAlarm OBJECT IDENTIFIER ::= { aprisaXETransmitterAlarms 17 } + +aprisaXETx11VHiAlarmStatus OBJECT-TYPE + SYNTAX FourRFAlarmStatus + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "The status of the transmitter 11V voltage too high alarm." + ::= { aprisaXETx11VHiAlarm 1 } + +aprisaXETx11VHiAlarmSeverity OBJECT-TYPE + SYNTAX FourRFAlarmSeverity + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "The severity of the transmitter 11V voltage too high alarm." + ::= { aprisaXETx11VHiAlarm 2 } + +aprisaXETx11VHiAlarmEnabled OBJECT-TYPE + SYNTAX FourRFAlarmEnabled + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "Indicates whether the transmitter 11V voltage too high alarm is enabled." + ::= { aprisaXETx11VHiAlarm 3 } + +aprisaXETx11VHiAlarmThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "Indicates the level at which the transmitter 11V voltage too high + alarm will be set." + ::= { aprisaXETx11VHiAlarm 4 } + +aprisaXETx11VHiAlarmClearThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "Indicates the level at which the transmitter 11V voltage too high + will be cleared." + ::= { aprisaXETx11VHiAlarm 5 } + +aprisaXETx11VHiAlarmsGroup OBJECT-GROUP + OBJECTS { aprisaXETx11VHiAlarmStatus, + aprisaXETx11VHiAlarmSeverity, + aprisaXETx11VHiAlarmEnabled, + aprisaXETx11VHiAlarmThreshold, + aprisaXETx11VHiAlarmClearThreshold + } + STATUS obsolete + DESCRIPTION "The AprisaXE transmitter 11V voltage too high alarm group." + ::= { aprisaXEGroups 136 } + + +aprisaXETx11VLoAlarm OBJECT IDENTIFIER ::= { aprisaXETransmitterAlarms 18 } + +aprisaXETx11VLoAlarmStatus OBJECT-TYPE + SYNTAX FourRFAlarmStatus + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "The status of the transmitter 11V voltage too low alarm." + ::= { aprisaXETx11VLoAlarm 1 } + +aprisaXETx11VLoAlarmSeverity OBJECT-TYPE + SYNTAX FourRFAlarmSeverity + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "The severity of the transmitter 11V voltage too low alarm." + ::= { aprisaXETx11VLoAlarm 2 } + +aprisaXETx11VLoAlarmEnabled OBJECT-TYPE + SYNTAX FourRFAlarmEnabled + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "Indicates whether the transmitter 11V voltage too low alarm is enabled." + ::= { aprisaXETx11VLoAlarm 3 } + +aprisaXETx11VLoAlarmThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "Indicates the level at which the transmitter 11V voltage too low + alarm will be set." + ::= { aprisaXETx11VLoAlarm 4 } + +aprisaXETx11VLoAlarmClearThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "Indicates the level at which the transmitter 11V voltage too low + will be cleared." + ::= { aprisaXETx11VLoAlarm 5 } + +aprisaXETx11VLoAlarmsGroup OBJECT-GROUP + OBJECTS { aprisaXETx11VLoAlarmStatus, + aprisaXETx11VLoAlarmSeverity, + aprisaXETx11VLoAlarmEnabled, + aprisaXETx11VLoAlarmThreshold, + aprisaXETx11VLoAlarmClearThreshold + } + STATUS obsolete + DESCRIPTION "The AprisaXE transmitter 11V voltage too low alarm group." + ::= { aprisaXEGroups 141 } + + +aprisaXETx28VHiAlarm OBJECT IDENTIFIER ::= { aprisaXETransmitterAlarms 19 } + +aprisaXETx28VHiAlarmStatus OBJECT-TYPE + SYNTAX FourRFAlarmStatus + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "The status of the transmitter 28V voltage too high alarm." + ::= { aprisaXETx28VHiAlarm 1 } + +aprisaXETx28VHiAlarmSeverity OBJECT-TYPE + SYNTAX FourRFAlarmSeverity + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "The severity of the transmitter 28V voltage too high alarm." + ::= { aprisaXETx28VHiAlarm 2 } + +aprisaXETx28VHiAlarmEnabled OBJECT-TYPE + SYNTAX FourRFAlarmEnabled + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "Indicates whether the transmitter 28V voltage too high alarm is enabled." + ::= { aprisaXETx28VHiAlarm 3 } + +aprisaXETx28VHiAlarmThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "Indicates the level at which the transmitter 28V voltage too high + alarm will be set." + ::= { aprisaXETx28VHiAlarm 4 } + +aprisaXETx28VHiAlarmClearThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "Indicates the level at which the transmitter 28V voltage too high + will be cleared." + ::= { aprisaXETx28VHiAlarm 5 } + +aprisaXETx28VHiAlarmsGroup OBJECT-GROUP + OBJECTS { aprisaXETx28VHiAlarmStatus, + aprisaXETx28VHiAlarmSeverity, + aprisaXETx28VHiAlarmEnabled, + aprisaXETx28VHiAlarmThreshold, + aprisaXETx28VHiAlarmClearThreshold + } + STATUS obsolete + DESCRIPTION "The AprisaXE transmitter 28V voltage too high alarm group." + ::= { aprisaXEGroups 146 } + + +aprisaXETx28VLoAlarm OBJECT IDENTIFIER ::= { aprisaXETransmitterAlarms 20 } + +aprisaXETx28VLoAlarmStatus OBJECT-TYPE + SYNTAX FourRFAlarmStatus + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "The status of the transmitter 28V voltage too low alarm." + ::= { aprisaXETx28VLoAlarm 1 } + +aprisaXETx28VLoAlarmSeverity OBJECT-TYPE + SYNTAX FourRFAlarmSeverity + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "The severity of the transmitter 28V voltage too low alarm." + ::= { aprisaXETx28VLoAlarm 2 } + +aprisaXETx28VLoAlarmEnabled OBJECT-TYPE + SYNTAX FourRFAlarmEnabled + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "Indicates whether the transmitter 28V voltage too low alarm is enabled." + ::= { aprisaXETx28VLoAlarm 3 } + +aprisaXETx28VLoAlarmThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "Indicates the level at which the transmitter 28V voltage too low + alarm will be set." + ::= { aprisaXETx28VLoAlarm 4 } + +aprisaXETx28VLoAlarmClearThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "Indicates the level at which the transmitter 28V voltage too low + will be cleared." + ::= { aprisaXETx28VLoAlarm 5 } + +aprisaXETx28VLoAlarmsGroup OBJECT-GROUP + OBJECTS { aprisaXETx28VLoAlarmStatus, + aprisaXETx28VLoAlarmSeverity, + aprisaXETx28VLoAlarmEnabled, + aprisaXETx28VLoAlarmThreshold, + aprisaXETx28VLoAlarmClearThreshold + } + STATUS obsolete + DESCRIPTION "The AprisaXE transmitter 28V voltage too low alarm group." + ::= { aprisaXEGroups 151 } + + +-- +-- Transmitter synthesiser out of lock alarm +-- + +aprisaXETxSynthOutOfLockAlarm OBJECT IDENTIFIER ::= { aprisaXETransmitterAlarms 21 } + +aprisaXETxSynthOutOfLockAlarmStatus OBJECT-TYPE + SYNTAX FourRFAlarmStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The status of the TX synth out of lock alarm." + ::= { aprisaXETxSynthOutOfLockAlarm 1 } + +aprisaXETxSynthOutOfLockAlarmSeverity OBJECT-TYPE + SYNTAX FourRFAlarmSeverity + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The severity of the TX synth out of lock alarm." + ::= { aprisaXETxSynthOutOfLockAlarm 2 } + +aprisaXETxSynthOutOfLockAlarmEnabled OBJECT-TYPE + SYNTAX FourRFAlarmEnabled + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates whether the TX synth out of lock alarm is enabled." + ::= { aprisaXETxSynthOutOfLockAlarm 3 } + +aprisaXETxSynthOutOfLockAlarmsGroup OBJECT-GROUP + OBJECTS { aprisaXETxSynthOutOfLockAlarmStatus, + aprisaXETxSynthOutOfLockAlarmSeverity, + aprisaXETxSynthOutOfLockAlarmEnabled + } + STATUS current + DESCRIPTION "The AprisaXE TX Synth out of lock alarm group." + ::= { aprisaXEGroups 153 } + + +-- +-- Return Loss Too High Alarm +-- +-- The threshold values vary according to the currently selected modulation. +-- + +aprisaXEReturnLossHiAlarm OBJECT IDENTIFIER ::= { aprisaXETransmitterAlarms 22 } + +aprisaXEReturnLossHiAlarmStatus OBJECT-TYPE + SYNTAX FourRFAlarmStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The status of the return loss out of limits alarm." + ::= { aprisaXEReturnLossHiAlarm 1 } + +aprisaXEReturnLossHiAlarmSeverity OBJECT-TYPE + SYNTAX FourRFAlarmSeverity + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The severity of the return loss out of limits alarm." + ::= { aprisaXEReturnLossHiAlarm 2 } + +aprisaXEReturnLossHiAlarmEnabled OBJECT-TYPE + SYNTAX FourRFAlarmEnabled + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates whether the return loss out of limits alarm is enabled." + ::= { aprisaXEReturnLossHiAlarm 3 } + +aprisaXEReturnLossHiAlarmThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Indicates the level at which the return loss alarm will be set." + ::= { aprisaXEReturnLossHiAlarm 4 } + +aprisaXEReturnLossHiAlarmClearThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Indicates the level at which the return loss alarm will be cleared." + ::= { aprisaXEReturnLossHiAlarm 5 } + +aprisaXEReturnLossHiAlarmsGroup OBJECT-GROUP + OBJECTS { aprisaXEReturnLossHiAlarmStatus, + aprisaXEReturnLossHiAlarmSeverity, + aprisaXEReturnLossHiAlarmEnabled, + aprisaXEReturnLossHiAlarmThreshold, + aprisaXEReturnLossHiAlarmClearThreshold + } + STATUS current + DESCRIPTION "The AprisaXE reverse power too high alarm group." + ::= { aprisaXEGroups 152 } + +-- *************************************************************************** +-- End of Transmitter alarms +-- *************************************************************************** + + + +-- *************************************************************************** +-- The Receiver alarms +-- *************************************************************************** + +aprisaXEReceiverAlarms OBJECT IDENTIFIER ::= { aprisaXELinkAlarms 6 } + + +-- Rx Synthesizer out of lock + +aprisaXERxSynthOutOfLockAlarm OBJECT IDENTIFIER ::= { aprisaXEReceiverAlarms 1 } + +aprisaXERxSynthOutOfLockAlarmStatus OBJECT-TYPE + SYNTAX FourRFAlarmStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The status of the Synth out of lock alarm." + ::= { aprisaXERxSynthOutOfLockAlarm 1 } + +aprisaXERxSynthOutOfLockAlarmSeverity OBJECT-TYPE + SYNTAX FourRFAlarmSeverity + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The severity of the Synth out of lock alarm." + ::= { aprisaXERxSynthOutOfLockAlarm 2 } + +aprisaXERxSynthOutOfLockAlarmEnabled OBJECT-TYPE + SYNTAX FourRFAlarmEnabled + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates whether the Synth out of lock alarm is enabled." + ::= { aprisaXERxSynthOutOfLockAlarm 3 } + +aprisaXERxSynthOutOfLockAlarmsGroup OBJECT-GROUP + OBJECTS { aprisaXERxSynthOutOfLockAlarmStatus, + aprisaXERxSynthOutOfLockAlarmSeverity, + aprisaXERxSynthOutOfLockAlarmEnabled + } + STATUS current + DESCRIPTION "The AprisaXE Synth out of lock alarm group." + ::= { aprisaXEGroups 161 } + + +-- +-- 12 V alarm +-- +aprisaXERx12VAlarm OBJECT IDENTIFIER ::= { aprisaXEReceiverAlarms 3 } + +aprisaXERx12VAlarmStatus OBJECT-TYPE + SYNTAX FourRFAlarmStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The status of the 12V supply alarm." + ::= { aprisaXERx12VAlarm 1 } + +aprisaXERx12VAlarmSeverity OBJECT-TYPE + SYNTAX FourRFAlarmSeverity + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The severity of the 12V supply aprisaXERxVtuneLoAlarmalarm." + ::= { aprisaXERx12VAlarm 2 } + +aprisaXERx12VAlarmEnabled OBJECT-TYPE + SYNTAX FourRFAlarmEnabled + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates whether the 12V supply alarm is enabled." + ::= { aprisaXERx12VAlarm 3 } + +aprisaXERx12VAlarmsGroup OBJECT-GROUP + OBJECTS { aprisaXERx12VAlarmStatus, + aprisaXERx12VAlarmSeverity, + aprisaXERx12VAlarmEnabled + } + STATUS current + DESCRIPTION "The AprisaXE 12V supply alarm group." + ::= { aprisaXEGroups 166 } + + +-- +-- 3.3V high alarm +-- + +aprisaXERx3V3HiAlarm OBJECT IDENTIFIER ::= { aprisaXEReceiverAlarms 4 } + +aprisaXERx3V3HiAlarmStatus OBJECT-TYPE + SYNTAX FourRFAlarmStatus + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "The status of the 3.3V supply high alarm." + ::= { aprisaXERx3V3HiAlarm 1 } + +aprisaXERx3V3HiAlarmSeverity OBJECT-TYPE + SYNTAX FourRFAlarmSeverity + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "The severity of the 3.3V supply high alarm." + ::= { aprisaXERx3V3HiAlarm 2 } + +aprisaXERx3V3HiAlarmEnabled OBJECT-TYPE + SYNTAX FourRFAlarmEnabled + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "Indicates whether the 3.3V supply high alarm is enabled." + ::= { aprisaXERx3V3HiAlarm 3 } + +aprisaXERx3V3HiAlarmThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "Indicates the level at which the 3.3V supply high + alarm will be set." + ::= { aprisaXERx3V3HiAlarm 4 } + +aprisaXERx3V3HiAlarmClearThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "Indicates the level at which the 3.3V supply high + will be cleared." + ::= { aprisaXERx3V3HiAlarm 5 } + +aprisaXERx3V3HiAlarmsGroup OBJECT-GROUP + OBJECTS { aprisaXERx3V3HiAlarmStatus, + aprisaXERx3V3HiAlarmSeverity, + aprisaXERx3V3HiAlarmEnabled, + aprisaXERx3V3HiAlarmThreshold, + aprisaXERx3V3HiAlarmClearThreshold + } + STATUS obsolete + DESCRIPTION "The AprisaXE 3.3V supply high alarm group." + ::= { aprisaXEGroups 171 } + + +-- +--3.3V low alarm +-- + +aprisaXERx3V3LoAlarm OBJECT IDENTIFIER ::= { aprisaXEReceiverAlarms 5 } + +aprisaXERx3V3LoAlarmStatus OBJECT-TYPE + SYNTAX FourRFAlarmStatus + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "The status of the 3.3V supply low alarm." + ::= { aprisaXERx3V3LoAlarm 1 } + +aprisaXERx3V3LoAlarmSeverity OBJECT-TYPE + SYNTAX FourRFAlarmSeverity + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "The severity of the 3.3V supply low alarm." + ::= { aprisaXERx3V3LoAlarm 2 } + +aprisaXERx3V3LoAlarmEnabled OBJECT-TYPE + SYNTAX FourRFAlarmEnabled + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "Indicates whether the 3.3V supply low alarm is enabled." + ::= { aprisaXERx3V3LoAlarm 3 } + +aprisaXERx3V3LoAlarmThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "Indicates the level at which the 3.3V supply low + alarm will be set." + ::= { aprisaXERx3V3LoAlarm 4 } + +aprisaXERx3V3LoAlarmClearThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "Indicates the level at which the 3.3V supply low + will be cleared." + ::= { aprisaXERx3V3LoAlarm 5 } + +aprisaXERx3V3LoAlarmsGroup OBJECT-GROUP + OBJECTS { aprisaXERx3V3LoAlarmStatus, + aprisaXERx3V3LoAlarmSeverity, + aprisaXERx3V3LoAlarmEnabled, + aprisaXERx3V3LoAlarmThreshold, + aprisaXERx3V3LoAlarmClearThreshold + } + STATUS obsolete + DESCRIPTION "The AprisaXE 3.3V supply low alarm group." + ::= { aprisaXEGroups 176 } + + +-- +-- 5V high alarm +-- + +aprisaXERx5VHiAlarm OBJECT IDENTIFIER ::= { aprisaXEReceiverAlarms 6 } + +aprisaXERx5VHiAlarmStatus OBJECT-TYPE + SYNTAX FourRFAlarmStatus + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "The status of the 5V supply High alarm." + ::= { aprisaXERx5VHiAlarm 1 } + +aprisaXERx5VHiAlarmSeverity OBJECT-TYPE + SYNTAX FourRFAlarmSeverity + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "The severity of the 5V supply High alarm." + ::= { aprisaXERx5VHiAlarm 2 } + +aprisaXERx5VHiAlarmEnabled OBJECT-TYPE + SYNTAX FourRFAlarmEnabled + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "Indicates whether the 5V supply High alarm is enabled." + ::= { aprisaXERx5VHiAlarm 3 } + +aprisaXERx5VHiAlarmThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "Indicates the level at which the 5V supply High + alarm will be set." + ::= { aprisaXERx5VHiAlarm 4 } + +aprisaXERx5VHiAlarmClearThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "Indicates the level at which the 5V supply High + will be cleared." + ::= { aprisaXERx5VHiAlarm 5 } + +aprisaXERx5VHiAlarmsGroup OBJECT-GROUP + OBJECTS { aprisaXERx5VHiAlarmStatus, + aprisaXERx5VHiAlarmSeverity, + aprisaXERx5VHiAlarmEnabled, + aprisaXERx5VHiAlarmThreshold, + aprisaXERx5VHiAlarmClearThreshold + } + STATUS obsolete + DESCRIPTION "The AprisaXE 5V supply High alarm group." + ::= { aprisaXEGroups 181 } + + +-- +--5V low alarm +-- + +aprisaXERx5VLoAlarm OBJECT IDENTIFIER ::= { aprisaXEReceiverAlarms 7 } + +aprisaXERx5VLoAlarmStatus OBJECT-TYPE + SYNTAX FourRFAlarmStatus + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "The status of the 5V supply low alarm." + ::= { aprisaXERx5VLoAlarm 1 } + +aprisaXERx5VLoAlarmSeverity OBJECT-TYPE + SYNTAX FourRFAlarmSeverity + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "The severity of the 5V supply low alarm." + ::= { aprisaXERx5VLoAlarm 2 } + +aprisaXERx5VLoAlarmEnabled OBJECT-TYPE + SYNTAX FourRFAlarmEnabled + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "Indicates whether the 5V supply low alarm is enabled." + ::= { aprisaXERx5VLoAlarm 3 } + +aprisaXERx5VLoAlarmThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "Indicates the level at which the 5V supply low + alarm will be set." + ::= { aprisaXERx5VLoAlarm 4 } + +aprisaXERx5VLoAlarmClearThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "Indicates the level at which the 5V supply low + will be cleared." + ::= { aprisaXERx5VLoAlarm 5 } + +aprisaXERx5VLoAlarmsGroup OBJECT-GROUP + OBJECTS { aprisaXERx5VLoAlarmStatus, + aprisaXERx5VLoAlarmSeverity, + aprisaXERx5VLoAlarmEnabled, + aprisaXERx5VLoAlarmThreshold, + aprisaXERx5VLoAlarmClearThreshold + } + STATUS obsolete + DESCRIPTION "The AprisaXE 5V supply low alarm group." + ::= { aprisaXEGroups 186 } + + +-- +-- 9V high alarm +-- + +aprisaXERx9VHiAlarm OBJECT IDENTIFIER ::= { aprisaXEReceiverAlarms 8 } + +aprisaXERx9VHiAlarmStatus OBJECT-TYPE + SYNTAX FourRFAlarmStatus + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "The status of the 9V supply High alarm." + ::= { aprisaXERx9VHiAlarm 1 } + +aprisaXERx9VHiAlarmSeverity OBJECT-TYPE + SYNTAX FourRFAlarmSeverity + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "The severity of the 9V supply High alarm." + ::= { aprisaXERx9VHiAlarm 2 } + +aprisaXERx9VHiAlarmEnabled OBJECT-TYPE + SYNTAX FourRFAlarmEnabled + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "Indicates whether the 9V supply High alarm is enabled." + ::= { aprisaXERx9VHiAlarm 3 } + +aprisaXERx9VHiAlarmThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "Indicates the level at which the 9V supply High + alarm will be set." + ::= { aprisaXERx9VHiAlarm 4 } + +aprisaXERx9VHiAlarmClearThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "Indicates the level at which the 9V supply High + will be cleared." + ::= { aprisaXERx9VHiAlarm 5 } + +aprisaXERx9VHiAlarmsGroup OBJECT-GROUP + OBJECTS { aprisaXERx9VHiAlarmStatus, + aprisaXERx9VHiAlarmSeverity, + aprisaXERx9VHiAlarmEnabled, + aprisaXERx9VHiAlarmThreshold, + aprisaXERx9VHiAlarmClearThreshold + } + STATUS obsolete + DESCRIPTION "The AprisaXE 9V supply High alarm group." + ::= { aprisaXEGroups 191 } + + +-- +-- 9V low alarm +-- + +aprisaXERx9VLoAlarm OBJECT IDENTIFIER ::= { aprisaXEReceiverAlarms 9 } + +aprisaXERx9VLoAlarmStatus OBJECT-TYPE + SYNTAX FourRFAlarmStatus + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "The status of the 9V supply low alarm." + ::= { aprisaXERx9VLoAlarm 1 } + +aprisaXERx9VLoAlarmSeverity OBJECT-TYPE + SYNTAX FourRFAlarmSeverity + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "The severity of the 9V supply low alarm." + ::= { aprisaXERx9VLoAlarm 2 } + +aprisaXERx9VLoAlarmEnabled OBJECT-TYPE + SYNTAX FourRFAlarmEnabled + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "Indicates whether the 9V supply low alarm is enabled." + ::= { aprisaXERx9VLoAlarm 3 } + +aprisaXERx9VLoAlarmThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "Indicates the level at which the 9V supply low + alarm will be set." + ::= { aprisaXERx9VLoAlarm 4 } + +aprisaXERx9VLoAlarmClearThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "Indicates the level at which the 9V supply low + will be cleared." + ::= { aprisaXERx9VLoAlarm 5 } + +aprisaXERx9VLoAlarmsGroup OBJECT-GROUP + OBJECTS { aprisaXERx9VLoAlarmStatus, + aprisaXERx9VLoAlarmSeverity, + aprisaXERx9VLoAlarmEnabled, + aprisaXERx9VLoAlarmThreshold, + aprisaXERx9VLoAlarmClearThreshold + } + STATUS obsolete + DESCRIPTION "The AprisaXE 9V supply low alarm group." + ::= { aprisaXEGroups 196 } + + +-- +-- Neg 1V5 high alarm +-- + +aprisaXERxNeg1V5HiAlarm OBJECT IDENTIFIER ::= { aprisaXEReceiverAlarms 10 } + +aprisaXERxNeg1V5HiAlarmStatus OBJECT-TYPE + SYNTAX FourRFAlarmStatus + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "The status of the Neg 1.5V supply High alarm." + ::= { aprisaXERxNeg1V5HiAlarm 1 } + +aprisaXERxNeg1V5HiAlarmSeverity OBJECT-TYPE + SYNTAX FourRFAlarmSeverity + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "The severity of the Neg 1.5V supply High alarm." + ::= { aprisaXERxNeg1V5HiAlarm 2 } + +aprisaXERxNeg1V5HiAlarmEnabled OBJECT-TYPE + SYNTAX FourRFAlarmEnabled + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "Indicates whether the Neg 1.5V supply High alarm is enabled." + ::= { aprisaXERxNeg1V5HiAlarm 3 } + +aprisaXERxNeg1V5HiAlarmThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "Indicates the level at which the Neg 1.5V supply High + alarm will be set." + ::= { aprisaXERxNeg1V5HiAlarm 4 } + +aprisaXERxNeg1V5HiAlarmClearThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "Indicates the level at which the Neg 1.5V supply High + will be cleared." + ::= { aprisaXERxNeg1V5HiAlarm 5 } + +aprisaXERxNeg1V5HiAlarmsGroup OBJECT-GROUP + OBJECTS { aprisaXERxNeg1V5HiAlarmStatus, + aprisaXERxNeg1V5HiAlarmSeverity, + aprisaXERxNeg1V5HiAlarmEnabled, + aprisaXERxNeg1V5HiAlarmThreshold, + aprisaXERxNeg1V5HiAlarmClearThreshold + } + STATUS obsolete + DESCRIPTION "The AprisaXE Neg 1.5V supply High alarm group." + ::= { aprisaXEGroups 201 } + + +-- +-- Neg 1V5 low alarm +-- + +aprisaXERxNeg1V5LoAlarm OBJECT IDENTIFIER ::= { aprisaXEReceiverAlarms 11 } + +aprisaXERxNeg1V5LoAlarmStatus OBJECT-TYPE + SYNTAX FourRFAlarmStatus + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "The status of the Neg 1.5V supply low alarm." + ::= { aprisaXERxNeg1V5LoAlarm 1 } + +aprisaXERxNeg1V5LoAlarmSeverity OBJECT-TYPE + SYNTAX FourRFAlarmSeverity + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "The severity of the Neg 1.5V supply low alarm." + ::= { aprisaXERxNeg1V5LoAlarm 2 } + +aprisaXERxNeg1V5LoAlarmEnabled OBJECT-TYPE + SYNTAX FourRFAlarmEnabled + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "Indicates whether the Neg 1.5V supply low alarm is enabled." + ::= { aprisaXERxNeg1V5LoAlarm 3 } + +aprisaXERxNeg1V5LoAlarmThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "Indicates the level at which the Neg 1.5V supply low + alarm will be set." + ::= { aprisaXERxNeg1V5LoAlarm 4 } + +aprisaXERxNeg1V5LoAlarmClearThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "Indicates the level at which the Neg 1.5V supply low + will be cleared." + ::= { aprisaXERxNeg1V5LoAlarm 5 } + +aprisaXERxNeg1V5LoAlarmsGroup OBJECT-GROUP + OBJECTS { aprisaXERxNeg1V5LoAlarmStatus, + aprisaXERxNeg1V5LoAlarmSeverity, + aprisaXERxNeg1V5LoAlarmEnabled, + aprisaXERxNeg1V5LoAlarmThreshold, + aprisaXERxNeg1V5LoAlarmClearThreshold + } + STATUS obsolete + DESCRIPTION "The AprisaXE Neg 1.5V supply low alarm group." + ::= { aprisaXEGroups 206 } + + +-- +-- AGC high alarm +-- + +aprisaXERxAgcHiAlarm OBJECT IDENTIFIER ::= { aprisaXEReceiverAlarms 12 } + +aprisaXERxAgcHiAlarmStatus OBJECT-TYPE + SYNTAX FourRFAlarmStatus + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "The status of the AGC high alarm." + ::= { aprisaXERxAgcHiAlarm 1 } + +aprisaXERxAgcHiAlarmSeverity OBJECT-TYPE + SYNTAX FourRFAlarmSeverity + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "The severity of the AGC high alarm." + ::= { aprisaXERxAgcHiAlarm 2 } + +aprisaXERxAgcHiAlarmEnabled OBJECT-TYPE + SYNTAX FourRFAlarmEnabled + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "Indicates whether the AGC high alarm is enabled." + ::= { aprisaXERxAgcHiAlarm 3 } + +aprisaXERxAgcHiAlarmThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "Indicates the level at which the AGC high + alarm will be set." + ::= { aprisaXERxAgcHiAlarm 4 } + +aprisaXERxAgcHiAlarmClearThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "Indicates the level at which the AGC high + will be cleared." + ::= { aprisaXERxAgcHiAlarm 5 } + +aprisaXERxAgcHiAlarmsGroup OBJECT-GROUP + OBJECTS { aprisaXERxAgcHiAlarmStatus, + aprisaXERxAgcHiAlarmSeverity, + aprisaXERxAgcHiAlarmEnabled, + aprisaXERxAgcHiAlarmThreshold, + aprisaXERxAgcHiAlarmClearThreshold + } + STATUS obsolete + DESCRIPTION "The AprisaXE AGC high alarm group." + ::= { aprisaXEGroups 211 } + + +-- +--AGC low alarm +-- + +aprisaXERxAgcLoAlarm OBJECT IDENTIFIER ::= { aprisaXEReceiverAlarms 13 } + +aprisaXERxAgcLoAlarmStatus OBJECT-TYPE + SYNTAX FourRFAlarmStatus + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "The status of the AGC low alarm." + ::= { aprisaXERxAgcLoAlarm 1 } + +aprisaXERxAgcLoAlarmSeverity OBJECT-TYPE + SYNTAX FourRFAlarmSeverity + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "The severity of the AGC low alarm." + ::= { aprisaXERxAgcLoAlarm 2 } + +aprisaXERxAgcLoAlarmEnabled OBJECT-TYPE + SYNTAX FourRFAlarmEnabled + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "Indicates whether the AGC low alarm is enabled." + ::= { aprisaXERxAgcLoAlarm 3 } + +aprisaXERxAgcLoAlarmThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "Indicates the level at which the AGC low + alarm will be set." + ::= { aprisaXERxAgcLoAlarm 4 } + +aprisaXERxAgcLoAlarmClearThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "Indicates the level at which the AGC low + will be cleared." + ::= { aprisaXERxAgcLoAlarm 5 } + +aprisaXERxAgcLoAlarmsGroup OBJECT-GROUP + OBJECTS { aprisaXERxAgcLoAlarmStatus, + aprisaXERxAgcLoAlarmSeverity, + aprisaXERxAgcLoAlarmEnabled, + aprisaXERxAgcLoAlarmThreshold, + aprisaXERxAgcLoAlarmClearThreshold + } + STATUS obsolete + DESCRIPTION "The AprisaXE AGC low alarm group." + ::= { aprisaXEGroups 216 } + + +-- +-- RSSI High alarm +-- + +aprisaXERxRssiHiAlarm OBJECT IDENTIFIER ::= { aprisaXEReceiverAlarms 14 } + +aprisaXERxRssiHiAlarmStatus OBJECT-TYPE + SYNTAX FourRFAlarmStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The status of the RSSI High alarm." + ::= { aprisaXERxRssiHiAlarm 1 } + +aprisaXERxRssiHiAlarmSeverity OBJECT-TYPE + SYNTAX FourRFAlarmSeverity + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The severity of the RSSI High alarm." + ::= { aprisaXERxRssiHiAlarm 2 } + +aprisaXERxRssiHiAlarmEnabled OBJECT-TYPE + SYNTAX FourRFAlarmEnabled + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates whether the RSSI High alarm is enabled." + ::= { aprisaXERxRssiHiAlarm 3 } + +aprisaXERxRssiHiAlarmThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates the level at which the RSSI High + alarm will be set." + ::= { aprisaXERxRssiHiAlarm 4 } + +aprisaXERxRssiHiAlarmClearThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates the level at which the RSSI High + will be cleared." + ::= { aprisaXERxRssiHiAlarm 5 } + +aprisaXERxRssiHiAlarmsGroup OBJECT-GROUP + OBJECTS { aprisaXERxRssiHiAlarmStatus, + aprisaXERxRssiHiAlarmSeverity, + aprisaXERxRssiHiAlarmEnabled, + aprisaXERxRssiHiAlarmThreshold, + aprisaXERxRssiHiAlarmClearThreshold + } + STATUS current + DESCRIPTION "The AprisaXE RSSI High alarm group." + ::= { aprisaXEGroups 221 } + + +-- +-- RSSI low alarms +-- + +aprisaXERxRssiLoAlarm OBJECT IDENTIFIER ::= { aprisaXEReceiverAlarms 15 } + +aprisaXERxRssiLoAlarmStatus OBJECT-TYPE + SYNTAX FourRFAlarmStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The status of the RSSI low alarm." + ::= { aprisaXERxRssiLoAlarm 1 } + +aprisaXERxRssiLoAlarmSeverity OBJECT-TYPE + SYNTAX FourRFAlarmSeverity + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The severity of the RSSI low alarm." + ::= { aprisaXERxRssiLoAlarm 2 } + +aprisaXERxRssiLoAlarmEnabled OBJECT-TYPE + SYNTAX FourRFAlarmEnabled + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates whether the RSSI low alarm is enabled." + ::= { aprisaXERxRssiLoAlarm 3 } + +aprisaXERxRssiLoAlarmThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates the level at which the RSSI low + alarm will be set." + ::= { aprisaXERxRssiLoAlarm 4 } + +aprisaXERxRssiLoAlarmClearThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates the level at which the RSSI low + will be cleared." + ::= { aprisaXERxRssiLoAlarm 5 } + +aprisaXERxRssiLoAlarmsGroup OBJECT-GROUP + OBJECTS { aprisaXERxRssiLoAlarmStatus, + aprisaXERxRssiLoAlarmSeverity, + aprisaXERxRssiLoAlarmEnabled, + aprisaXERxRssiLoAlarmThreshold, + aprisaXERxRssiLoAlarmClearThreshold + } + STATUS current + DESCRIPTION "The AprisaXE RSSI low alarm group." + ::= { aprisaXEGroups 226 } + + +-- +-- VTune High Alarm +-- + +aprisaXERxVtuneHiAlarm OBJECT IDENTIFIER ::= { aprisaXEReceiverAlarms 16 } + +aprisaXERxVtuneHiAlarmStatus OBJECT-TYPE + SYNTAX FourRFAlarmStatus + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "The status of the Vtune High alarm." + ::= { aprisaXERxVtuneHiAlarm 1 } + +aprisaXERxVtuneHiAlarmSeverity OBJECT-TYPE + SYNTAX FourRFAlarmSeverity + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "The severity of the Vtune High alarm." + ::= { aprisaXERxVtuneHiAlarm 2 } + +aprisaXERxVtuneHiAlarmEnabled OBJECT-TYPE + SYNTAX FourRFAlarmEnabled + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "Indicates whether the Vtune High alarm is enabled." + ::= { aprisaXERxVtuneHiAlarm 3 } + +aprisaXERxVtuneHiAlarmThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "Indicates the level at which the Vtune High + alarm will be set." + ::= { aprisaXERxVtuneHiAlarm 4 } + +aprisaXERxVtuneHiAlarmClearThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "Indicates the level at which the Vtune High + will be cleared." + ::= { aprisaXERxVtuneHiAlarm 5 } + +aprisaXERxVtuneHiAlarmsGroup OBJECT-GROUP + OBJECTS { aprisaXERxVtuneHiAlarmStatus, + aprisaXERxVtuneHiAlarmSeverity, + aprisaXERxVtuneHiAlarmEnabled, + aprisaXERxVtuneHiAlarmThreshold, + aprisaXERxVtuneHiAlarmClearThreshold + } + STATUS obsolete + DESCRIPTION "The AprisaXE Vtune High alarm group." + ::= { aprisaXEGroups 231 } + + +-- +--Vtune low alarm +-- + +aprisaXERxVtuneLoAlarm OBJECT IDENTIFIER ::= { aprisaXEReceiverAlarms 17 } + +aprisaXERxVtuneLoAlarmStatus OBJECT-TYPE + SYNTAX FourRFAlarmStatus + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "The status of the Vtune low alarm." + ::= { aprisaXERxVtuneLoAlarm 1 } + +aprisaXERxVtuneLoAlarmSeverity OBJECT-TYPE + SYNTAX FourRFAlarmSeverity + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "The severity of the Vtune low alarm." + ::= { aprisaXERxVtuneLoAlarm 2 } + +aprisaXERxVtuneLoAlarmEnabled OBJECT-TYPE + SYNTAX FourRFAlarmEnabled + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "Indicates whether the Vtune low alarm is enabled." + ::= { aprisaXERxVtuneLoAlarm 3 } + +aprisaXERxVtuneLoAlarmThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "Indicates the level at which the Vtune low + alarm will be set." + ::= { aprisaXERxVtuneLoAlarm 4 } + +aprisaXERxVtuneLoAlarmClearThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION "Indicates the level at which the Vtune low + will be cleared." + ::= { aprisaXERxVtuneLoAlarm 5 } + +aprisaXERxVtuneLoAlarmsGroup OBJECT-GROUP + OBJECTS { aprisaXERxVtuneLoAlarmStatus, + aprisaXERxVtuneLoAlarmSeverity, + aprisaXERxVtuneLoAlarmEnabled, + aprisaXERxVtuneLoAlarmThreshold, + aprisaXERxVtuneLoAlarmClearThreshold + } + STATUS obsolete + DESCRIPTION "The AprisaXE Vtune low alarm group." + ::= { aprisaXEGroups 236 } + + +-- +-- EE Alarm +-- + +aprisaXERxEEAlarm OBJECT IDENTIFIER ::= { aprisaXEReceiverAlarms 18 } + +aprisaXERxEEAlarmStatus OBJECT-TYPE + SYNTAX FourRFAlarmStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The status of the EEPROM alarm." + ::= { aprisaXERxEEAlarm 1 } + +aprisaXERxEEAlarmSeverity OBJECT-TYPE + SYNTAX FourRFAlarmSeverity + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The severity of the EEPROM alarm." + ::= { aprisaXERxEEAlarm 2 } + +aprisaXERxEEAlarmEnabled OBJECT-TYPE + SYNTAX FourRFAlarmEnabled + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates whether the EEPROM alarm is enabled." + ::= { aprisaXERxEEAlarm 3 } + +aprisaXERxEEAlarmsGroup OBJECT-GROUP + OBJECTS { aprisaXERxEEAlarmStatus, + aprisaXERxEEAlarmSeverity, + aprisaXERxEEAlarmEnabled + } + STATUS current + DESCRIPTION "The AprisaXE EEPROM alarm group." + ::= { aprisaXEGroups 241 } + +-- *************************************************************************** +-- End of Receiver alarms +-- *************************************************************************** + + + +-- *************************************************************************** +-- The Generic Transmitter Alarms +-- *************************************************************************** + +aprisaXETxADCChZeroHiAlarm OBJECT IDENTIFIER ::= { aprisaXETransmitterAlarms 23 } + +aprisaXETxADCChZeroHiAlarmName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The name of the transmitter ADC Ch Zero voltage too high alarm." + ::= { aprisaXETxADCChZeroHiAlarm 1 } + +aprisaXETxADCChZeroHiAlarmStatus OBJECT-TYPE + SYNTAX FourRFAlarmStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The status of the transmitter ADC Ch Zero voltage too high alarm." + ::= { aprisaXETxADCChZeroHiAlarm 2 } + +aprisaXETxADCChZeroHiAlarmSeverity OBJECT-TYPE + SYNTAX FourRFAlarmSeverity + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The severity of the transmitter ADC Ch Zero voltage too high alarm." + ::= { aprisaXETxADCChZeroHiAlarm 3 } + +aprisaXETxADCChZeroHiAlarmEnabled OBJECT-TYPE + SYNTAX FourRFAlarmEnabled + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates whether the transmitter ADC Ch Zero voltage too high alarm is enabled." + ::= { aprisaXETxADCChZeroHiAlarm 4 } + +aprisaXETxADCChZeroHiAlarmThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates the level at which the transmitter ADC Ch Zero voltage too high + alarm will be set." + ::= { aprisaXETxADCChZeroHiAlarm 5 } + +aprisaXETxADCChZeroHiAlarmClearThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates the level at which the transmitter ADC Ch Zero voltage too high + will be cleared." + ::= { aprisaXETxADCChZeroHiAlarm 6 } + +aprisaXETxADCChZeroHiAlarmsGroup OBJECT-GROUP + OBJECTS { aprisaXETxADCChZeroHiAlarmName, + aprisaXETxADCChZeroHiAlarmStatus, + aprisaXETxADCChZeroHiAlarmSeverity, + aprisaXETxADCChZeroHiAlarmEnabled, + aprisaXETxADCChZeroHiAlarmThreshold, + aprisaXETxADCChZeroHiAlarmClearThreshold + } + STATUS current + DESCRIPTION "The aprisaXETx transmitter ADC Ch Zero voltage too high alarm group." + ::= { aprisaXEGroups 250 } + + +aprisaXETxADCChZeroLoAlarm OBJECT IDENTIFIER ::= { aprisaXETransmitterAlarms 24 } + +aprisaXETxADCChZeroLoAlarmName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The name of the transmitter ADC Ch Zero voltage too low alarm." + ::= { aprisaXETxADCChZeroLoAlarm 1 } + +aprisaXETxADCChZeroLoAlarmStatus OBJECT-TYPE + SYNTAX FourRFAlarmStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The status of the transmitter ADC Ch Zero voltage too low alarm." + ::= { aprisaXETxADCChZeroLoAlarm 2 } + +aprisaXETxADCChZeroLoAlarmSeverity OBJECT-TYPE + SYNTAX FourRFAlarmSeverity + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The severity of the transmitter ADC Ch Zero voltage too low alarm." + ::= { aprisaXETxADCChZeroLoAlarm 3 } + +aprisaXETxADCChZeroLoAlarmEnabled OBJECT-TYPE + SYNTAX FourRFAlarmEnabled + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates whether the transmitter ADC Ch Zero voltage too low alarm is enabled." + ::= { aprisaXETxADCChZeroLoAlarm 4 } + +aprisaXETxADCChZeroLoAlarmThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates the level at wLoch the transmitter ADC Ch Zero voltage too low + alarm will be set." + ::= { aprisaXETxADCChZeroLoAlarm 5 } + +aprisaXETxADCChZeroLoAlarmClearThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates the level at wLoch the transmitter ADC Ch Zero voltage too low + will be cleared." + ::= { aprisaXETxADCChZeroLoAlarm 6 } + +aprisaXETxADCChZeroLoAlarmsGroup OBJECT-GROUP + OBJECTS { aprisaXETxADCChZeroLoAlarmName, + aprisaXETxADCChZeroLoAlarmStatus, + aprisaXETxADCChZeroLoAlarmSeverity, + aprisaXETxADCChZeroLoAlarmEnabled, + aprisaXETxADCChZeroLoAlarmThreshold, + aprisaXETxADCChZeroLoAlarmClearThreshold + } + STATUS current + DESCRIPTION "The aprisaXETx transmitter ADC Ch Zero voltage too High alarm group." + ::= { aprisaXEGroups 251 } + + +aprisaXETxADCChOneHiAlarm OBJECT IDENTIFIER ::= { aprisaXETransmitterAlarms 25 } + +aprisaXETxADCChOneHiAlarmName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The name of the transmitter ADC Ch One voltage too high alarm." + ::= { aprisaXETxADCChOneHiAlarm 1 } + +aprisaXETxADCChOneHiAlarmStatus OBJECT-TYPE + SYNTAX FourRFAlarmStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The status of the transmitter ADC Ch One voltage too high alarm." + ::= { aprisaXETxADCChOneHiAlarm 2 } + +aprisaXETxADCChOneHiAlarmSeverity OBJECT-TYPE + SYNTAX FourRFAlarmSeverity + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The severity of the transmitter ADC Ch One voltage too high alarm." + ::= { aprisaXETxADCChOneHiAlarm 3 } + +aprisaXETxADCChOneHiAlarmEnabled OBJECT-TYPE + SYNTAX FourRFAlarmEnabled + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates whether the transmitter ADC Ch One voltage too high alarm is enabled." + ::= { aprisaXETxADCChOneHiAlarm 4 } + +aprisaXETxADCChOneHiAlarmThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates the level at which the transmitter ADC Ch One voltage too high + alarm will be set." + ::= { aprisaXETxADCChOneHiAlarm 5 } + +aprisaXETxADCChOneHiAlarmClearThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates the level at which the transmitter ADC Ch One voltage too high + will be cleared." + ::= { aprisaXETxADCChOneHiAlarm 6 } + +aprisaXETxADCChOneHiAlarmsGroup OBJECT-GROUP + OBJECTS { aprisaXETxADCChOneHiAlarmName, + aprisaXETxADCChOneHiAlarmStatus, + aprisaXETxADCChOneHiAlarmSeverity, + aprisaXETxADCChOneHiAlarmEnabled, + aprisaXETxADCChOneHiAlarmThreshold, + aprisaXETxADCChOneHiAlarmClearThreshold + } + STATUS current + DESCRIPTION "The aprisaXETx transmitter ADC Ch One voltage too high alarm group." + ::= { aprisaXEGroups 252 } + + +aprisaXETxADCChOneLoAlarm OBJECT IDENTIFIER ::= { aprisaXETransmitterAlarms 26 } + +aprisaXETxADCChOneLoAlarmName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The name of the transmitter ADC Ch One voltage too low alarm." + ::= { aprisaXETxADCChOneLoAlarm 1 } + +aprisaXETxADCChOneLoAlarmStatus OBJECT-TYPE + SYNTAX FourRFAlarmStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The status of the transmitter ADC Ch One voltage too low alarm." + ::= { aprisaXETxADCChOneLoAlarm 2 } + +aprisaXETxADCChOneLoAlarmSeverity OBJECT-TYPE + SYNTAX FourRFAlarmSeverity + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The severity of the transmitter ADC Ch One voltage too low alarm." + ::= { aprisaXETxADCChOneLoAlarm 3 } + +aprisaXETxADCChOneLoAlarmEnabled OBJECT-TYPE + SYNTAX FourRFAlarmEnabled + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates whether the transmitter ADC Ch One voltage too low alarm is enabled." + ::= { aprisaXETxADCChOneLoAlarm 4 } + +aprisaXETxADCChOneLoAlarmThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates the level at wLoch the transmitter ADC Ch One voltage too low + alarm will be set." + ::= { aprisaXETxADCChOneLoAlarm 5 } + +aprisaXETxADCChOneLoAlarmClearThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates the level at wLoch the transmitter ADC Ch One voltage too low + will be cleared." + ::= { aprisaXETxADCChOneLoAlarm 6 } + +aprisaXETxADCChOneLoAlarmsGroup OBJECT-GROUP + OBJECTS { aprisaXETxADCChOneLoAlarmName, + aprisaXETxADCChOneLoAlarmStatus, + aprisaXETxADCChOneLoAlarmSeverity, + aprisaXETxADCChOneLoAlarmEnabled, + aprisaXETxADCChOneLoAlarmThreshold, + aprisaXETxADCChOneLoAlarmClearThreshold + } + STATUS current + DESCRIPTION "The aprisaXETx transmitter ADC Ch One voltage too High alarm group." + ::= { aprisaXEGroups 253 } + + +aprisaXETxADCChTwoHiAlarm OBJECT IDENTIFIER ::= { aprisaXETransmitterAlarms 27 } + +aprisaXETxADCChTwoHiAlarmName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The name of the transmitter ADC Ch Two voltage too high alarm." + ::= { aprisaXETxADCChTwoHiAlarm 1 } + +aprisaXETxADCChTwoHiAlarmStatus OBJECT-TYPE + SYNTAX FourRFAlarmStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The status of the transmitter ADC Ch Two voltage too high alarm." + ::= { aprisaXETxADCChTwoHiAlarm 2 } + +aprisaXETxADCChTwoHiAlarmSeverity OBJECT-TYPE + SYNTAX FourRFAlarmSeverity + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The severity of the transmitter ADC Ch Two voltage too high alarm." + ::= { aprisaXETxADCChTwoHiAlarm 3 } + +aprisaXETxADCChTwoHiAlarmEnabled OBJECT-TYPE + SYNTAX FourRFAlarmEnabled + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates whether the transmitter ADC Ch Two voltage too high alarm is enabled." + ::= { aprisaXETxADCChTwoHiAlarm 4 } + +aprisaXETxADCChTwoHiAlarmThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates the level at which the transmitter ADC Ch Two voltage too high + alarm will be set." + ::= { aprisaXETxADCChTwoHiAlarm 5 } + +aprisaXETxADCChTwoHiAlarmClearThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates the level at which the transmitter ADC Ch Two voltage too high + will be cleared." + ::= { aprisaXETxADCChTwoHiAlarm 6 } + +aprisaXETxADCChTwoHiAlarmsGroup OBJECT-GROUP + OBJECTS { aprisaXETxADCChTwoHiAlarmName, + aprisaXETxADCChTwoHiAlarmStatus, + aprisaXETxADCChTwoHiAlarmSeverity, + aprisaXETxADCChTwoHiAlarmEnabled, + aprisaXETxADCChTwoHiAlarmThreshold, + aprisaXETxADCChTwoHiAlarmClearThreshold + } + STATUS current + DESCRIPTION "The aprisaXETx transmitter ADC Ch Two voltage too high alarm group." + ::= { aprisaXEGroups 254 } + + +aprisaXETxADCChTwoLoAlarm OBJECT IDENTIFIER ::= { aprisaXETransmitterAlarms 28 } + +aprisaXETxADCChTwoLoAlarmName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The name of the transmitter ADC Ch Two voltage too low alarm." + ::= { aprisaXETxADCChTwoLoAlarm 1 } + +aprisaXETxADCChTwoLoAlarmStatus OBJECT-TYPE + SYNTAX FourRFAlarmStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The status of the transmitter ADC Ch Two voltage too low alarm." + ::= { aprisaXETxADCChTwoLoAlarm 2 } + +aprisaXETxADCChTwoLoAlarmSeverity OBJECT-TYPE + SYNTAX FourRFAlarmSeverity + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The severity of the transmitter ADC Ch Two voltage too low alarm." + ::= { aprisaXETxADCChTwoLoAlarm 3 } + +aprisaXETxADCChTwoLoAlarmEnabled OBJECT-TYPE + SYNTAX FourRFAlarmEnabled + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates whether the transmitter ADC Ch Two voltage too low alarm is enabled." + ::= { aprisaXETxADCChTwoLoAlarm 4 } + +aprisaXETxADCChTwoLoAlarmThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates the level at wLoch the transmitter ADC Ch Two voltage too low + alarm will be set." + ::= { aprisaXETxADCChTwoLoAlarm 5 } + +aprisaXETxADCChTwoLoAlarmClearThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates the level at wLoch the transmitter ADC Ch Two voltage too low + will be cleared." + ::= { aprisaXETxADCChTwoLoAlarm 6 } + +aprisaXETxADCChTwoLoAlarmsGroup OBJECT-GROUP + OBJECTS { aprisaXETxADCChTwoLoAlarmName, + aprisaXETxADCChTwoLoAlarmStatus, + aprisaXETxADCChTwoLoAlarmSeverity, + aprisaXETxADCChTwoLoAlarmEnabled, + aprisaXETxADCChTwoLoAlarmThreshold, + aprisaXETxADCChTwoLoAlarmClearThreshold + } + STATUS current + DESCRIPTION "The aprisaXETx transmitter ADC Ch Two voltage too High alarm group." + ::= { aprisaXEGroups 255 } + + +aprisaXETxADCChThreeHiAlarm OBJECT IDENTIFIER ::= { aprisaXETransmitterAlarms 29 } + +aprisaXETxADCChThreeHiAlarmName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The name of the transmitter ADC Ch Three voltage too high alarm." + ::= { aprisaXETxADCChThreeHiAlarm 1 } + +aprisaXETxADCChThreeHiAlarmStatus OBJECT-TYPE + SYNTAX FourRFAlarmStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The status of the transmitter ADC Ch Three voltage too high alarm." + ::= { aprisaXETxADCChThreeHiAlarm 2 } + +aprisaXETxADCChThreeHiAlarmSeverity OBJECT-TYPE + SYNTAX FourRFAlarmSeverity + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The severity of the transmitter ADC Ch Three voltage too high alarm." + ::= { aprisaXETxADCChThreeHiAlarm 3 } + +aprisaXETxADCChThreeHiAlarmEnabled OBJECT-TYPE + SYNTAX FourRFAlarmEnabled + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates whether the transmitter ADC Ch Three voltage too high alarm is enabled." + ::= { aprisaXETxADCChThreeHiAlarm 4 } + +aprisaXETxADCChThreeHiAlarmThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates the level at which the transmitter ADC Ch Three voltage too high + alarm will be set." + ::= { aprisaXETxADCChThreeHiAlarm 5 } + +aprisaXETxADCChThreeHiAlarmClearThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates the level at which the transmitter ADC Ch Three voltage too high + will be cleared." + ::= { aprisaXETxADCChThreeHiAlarm 6 } + +aprisaXETxADCChThreeHiAlarmsGroup OBJECT-GROUP + OBJECTS { aprisaXETxADCChThreeHiAlarmName, + aprisaXETxADCChThreeHiAlarmStatus, + aprisaXETxADCChThreeHiAlarmSeverity, + aprisaXETxADCChThreeHiAlarmEnabled, + aprisaXETxADCChThreeHiAlarmThreshold, + aprisaXETxADCChThreeHiAlarmClearThreshold + } + STATUS current + DESCRIPTION "The aprisaXETx transmitter ADC Ch Three voltage too high alarm group." + ::= { aprisaXEGroups 256 } + + +aprisaXETxADCChThreeLoAlarm OBJECT IDENTIFIER ::= { aprisaXETransmitterAlarms 30 } + +aprisaXETxADCChThreeLoAlarmName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The name of the transmitter ADC Ch Three voltage too low alarm." + ::= { aprisaXETxADCChThreeLoAlarm 1 } + +aprisaXETxADCChThreeLoAlarmStatus OBJECT-TYPE + SYNTAX FourRFAlarmStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The status of the transmitter ADC Ch Three voltage too low alarm." + ::= { aprisaXETxADCChThreeLoAlarm 2 } + +aprisaXETxADCChThreeLoAlarmSeverity OBJECT-TYPE + SYNTAX FourRFAlarmSeverity + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The severity of the transmitter ADC Ch Three voltage too low alarm." + ::= { aprisaXETxADCChThreeLoAlarm 3 } + +aprisaXETxADCChThreeLoAlarmEnabled OBJECT-TYPE + SYNTAX FourRFAlarmEnabled + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates whether the transmitter ADC Ch Three voltage too low alarm is enabled." + ::= { aprisaXETxADCChThreeLoAlarm 4 } + +aprisaXETxADCChThreeLoAlarmThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates the level at wLoch the transmitter ADC Ch Three voltage too low + alarm will be set." + ::= { aprisaXETxADCChThreeLoAlarm 5 } + +aprisaXETxADCChThreeLoAlarmClearThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates the level at wLoch the transmitter ADC Ch Three voltage too low + will be cleared." + ::= { aprisaXETxADCChThreeLoAlarm 6 } + +aprisaXETxADCChThreeLoAlarmsGroup OBJECT-GROUP + OBJECTS { aprisaXETxADCChThreeLoAlarmName, + aprisaXETxADCChThreeLoAlarmStatus, + aprisaXETxADCChThreeLoAlarmSeverity, + aprisaXETxADCChThreeLoAlarmEnabled, + aprisaXETxADCChThreeLoAlarmThreshold, + aprisaXETxADCChThreeLoAlarmClearThreshold + } + STATUS current + DESCRIPTION "The aprisaXETx transmitter ADC Ch Three voltage too High alarm group." + ::= { aprisaXEGroups 257 } + + +aprisaXETxADCChFourHiAlarm OBJECT IDENTIFIER ::= { aprisaXETransmitterAlarms 31 } + +aprisaXETxADCChFourHiAlarmName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The name of the transmitter ADC Ch Four voltage too high alarm." + ::= { aprisaXETxADCChFourHiAlarm 1 } + +aprisaXETxADCChFourHiAlarmStatus OBJECT-TYPE + SYNTAX FourRFAlarmStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The status of the transmitter ADC Ch Four voltage too high alarm." + ::= { aprisaXETxADCChFourHiAlarm 2 } + +aprisaXETxADCChFourHiAlarmSeverity OBJECT-TYPE + SYNTAX FourRFAlarmSeverity + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The severity of the transmitter ADC Ch Four voltage too high alarm." + ::= { aprisaXETxADCChFourHiAlarm 3 } + +aprisaXETxADCChFourHiAlarmEnabled OBJECT-TYPE + SYNTAX FourRFAlarmEnabled + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates whether the transmitter ADC Ch Four voltage too high alarm is enabled." + ::= { aprisaXETxADCChFourHiAlarm 4 } + +aprisaXETxADCChFourHiAlarmThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates the level at which the transmitter ADC Ch Four voltage too high + alarm will be set." + ::= { aprisaXETxADCChFourHiAlarm 5 } + +aprisaXETxADCChFourHiAlarmClearThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates the level at which the transmitter ADC Ch Four voltage too high + will be cleared." + ::= { aprisaXETxADCChFourHiAlarm 6 } + +aprisaXETxADCChFourHiAlarmsGroup OBJECT-GROUP + OBJECTS { aprisaXETxADCChFourHiAlarmName, + aprisaXETxADCChFourHiAlarmStatus, + aprisaXETxADCChFourHiAlarmSeverity, + aprisaXETxADCChFourHiAlarmEnabled, + aprisaXETxADCChFourHiAlarmThreshold, + aprisaXETxADCChFourHiAlarmClearThreshold + } + STATUS current + DESCRIPTION "The aprisaXETx transmitter ADC Ch Four voltage too high alarm group." + ::= { aprisaXEGroups 258 } + + +aprisaXETxADCChFourLoAlarm OBJECT IDENTIFIER ::= { aprisaXETransmitterAlarms 32 } + +aprisaXETxADCChFourLoAlarmName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The name of the transmitter ADC Ch Four voltage too low alarm." + ::= { aprisaXETxADCChFourLoAlarm 1 } + +aprisaXETxADCChFourLoAlarmStatus OBJECT-TYPE + SYNTAX FourRFAlarmStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The status of the transmitter ADC Ch Four voltage too low alarm." + ::= { aprisaXETxADCChFourLoAlarm 2 } + +aprisaXETxADCChFourLoAlarmSeverity OBJECT-TYPE + SYNTAX FourRFAlarmSeverity + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The severity of the transmitter ADC Ch Four voltage too low alarm." + ::= { aprisaXETxADCChFourLoAlarm 3 } + +aprisaXETxADCChFourLoAlarmEnabled OBJECT-TYPE + SYNTAX FourRFAlarmEnabled + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates whether the transmitter ADC Ch Four voltage too low alarm is enabled." + ::= { aprisaXETxADCChFourLoAlarm 4 } + +aprisaXETxADCChFourLoAlarmThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates the level at wLoch the transmitter ADC Ch Four voltage too low + alarm will be set." + ::= { aprisaXETxADCChFourLoAlarm 5 } + +aprisaXETxADCChFourLoAlarmClearThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates the level at wLoch the transmitter ADC Ch Four voltage too low + will be cleared." + ::= { aprisaXETxADCChFourLoAlarm 6 } + +aprisaXETxADCChFourLoAlarmsGroup OBJECT-GROUP + OBJECTS { aprisaXETxADCChFourLoAlarmName, + aprisaXETxADCChFourLoAlarmStatus, + aprisaXETxADCChFourLoAlarmSeverity, + aprisaXETxADCChFourLoAlarmEnabled, + aprisaXETxADCChFourLoAlarmThreshold, + aprisaXETxADCChFourLoAlarmClearThreshold + } + STATUS current + DESCRIPTION "The aprisaXETx transmitter ADC Ch Four voltage too High alarm group." + ::= { aprisaXEGroups 259 } + + +aprisaXETxADCChFiveHiAlarm OBJECT IDENTIFIER ::= { aprisaXETransmitterAlarms 33 } + +aprisaXETxADCChFiveHiAlarmName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The name of the transmitter ADC Ch Five voltage too high alarm." + ::= { aprisaXETxADCChFiveHiAlarm 1 } + +aprisaXETxADCChFiveHiAlarmStatus OBJECT-TYPE + SYNTAX FourRFAlarmStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The status of the transmitter ADC Ch Five voltage too high alarm." + ::= { aprisaXETxADCChFiveHiAlarm 2 } + +aprisaXETxADCChFiveHiAlarmSeverity OBJECT-TYPE + SYNTAX FourRFAlarmSeverity + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The severity of the transmitter ADC Ch Five voltage too high alarm." + ::= { aprisaXETxADCChFiveHiAlarm 3 } + +aprisaXETxADCChFiveHiAlarmEnabled OBJECT-TYPE + SYNTAX FourRFAlarmEnabled + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates whether the transmitter ADC Ch Five voltage too high alarm is enabled." + ::= { aprisaXETxADCChFiveHiAlarm 4 } + +aprisaXETxADCChFiveHiAlarmThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates the level at which the transmitter ADC Ch Five voltage too high + alarm will be set." + ::= { aprisaXETxADCChFiveHiAlarm 5 } + +aprisaXETxADCChFiveHiAlarmClearThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates the level at which the transmitter ADC Ch Five voltage too high + will be cleared." + ::= { aprisaXETxADCChFiveHiAlarm 6 } + +aprisaXETxADCChFiveHiAlarmsGroup OBJECT-GROUP + OBJECTS { aprisaXETxADCChFiveHiAlarmName, + aprisaXETxADCChFiveHiAlarmStatus, + aprisaXETxADCChFiveHiAlarmSeverity, + aprisaXETxADCChFiveHiAlarmEnabled, + aprisaXETxADCChFiveHiAlarmThreshold, + aprisaXETxADCChFiveHiAlarmClearThreshold + } + STATUS current + DESCRIPTION "The aprisaXETx transmitter ADC Ch Five voltage too high alarm group." + ::= { aprisaXEGroups 260 } + + +aprisaXETxADCChFiveLoAlarm OBJECT IDENTIFIER ::= { aprisaXETransmitterAlarms 34 } + +aprisaXETxADCChFiveLoAlarmName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The name of the transmitter ADC Ch Five voltage too low alarm." + ::= { aprisaXETxADCChFiveLoAlarm 1 } + +aprisaXETxADCChFiveLoAlarmStatus OBJECT-TYPE + SYNTAX FourRFAlarmStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The status of the transmitter ADC Ch Five voltage too low alarm." + ::= { aprisaXETxADCChFiveLoAlarm 2 } + +aprisaXETxADCChFiveLoAlarmSeverity OBJECT-TYPE + SYNTAX FourRFAlarmSeverity + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The severity of the transmitter ADC Ch Five voltage too low alarm." + ::= { aprisaXETxADCChFiveLoAlarm 3 } + +aprisaXETxADCChFiveLoAlarmEnabled OBJECT-TYPE + SYNTAX FourRFAlarmEnabled + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates whether the transmitter ADC Ch Five voltage too low alarm is enabled." + ::= { aprisaXETxADCChFiveLoAlarm 4 } + +aprisaXETxADCChFiveLoAlarmThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates the level at wLoch the transmitter ADC Ch Five voltage too low + alarm will be set." + ::= { aprisaXETxADCChFiveLoAlarm 5 } + +aprisaXETxADCChFiveLoAlarmClearThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates the level at wLoch the transmitter ADC Ch Five voltage too low + will be cleared." + ::= { aprisaXETxADCChFiveLoAlarm 6 } + +aprisaXETxADCChFiveLoAlarmsGroup OBJECT-GROUP + OBJECTS { aprisaXETxADCChFiveLoAlarmName, + aprisaXETxADCChFiveLoAlarmStatus, + aprisaXETxADCChFiveLoAlarmSeverity, + aprisaXETxADCChFiveLoAlarmEnabled, + aprisaXETxADCChFiveLoAlarmThreshold, + aprisaXETxADCChFiveLoAlarmClearThreshold + } + STATUS current + DESCRIPTION "The aprisaXETx transmitter ADC Ch Five voltage too High alarm group." + ::= { aprisaXEGroups 261 } + + +aprisaXETxADCChSixHiAlarm OBJECT IDENTIFIER ::= { aprisaXETransmitterAlarms 35 } + +aprisaXETxADCChSixHiAlarmName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The name of the transmitter ADC Ch Six voltage too high alarm." + ::= { aprisaXETxADCChSixHiAlarm 1 } + +aprisaXETxADCChSixHiAlarmStatus OBJECT-TYPE + SYNTAX FourRFAlarmStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The status of the transmitter ADC Ch Six voltage too high alarm." + ::= { aprisaXETxADCChSixHiAlarm 2 } + +aprisaXETxADCChSixHiAlarmSeverity OBJECT-TYPE + SYNTAX FourRFAlarmSeverity + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The severity of the transmitter ADC Ch Six voltage too high alarm." + ::= { aprisaXETxADCChSixHiAlarm 3 } + +aprisaXETxADCChSixHiAlarmEnabled OBJECT-TYPE + SYNTAX FourRFAlarmEnabled + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates whether the transmitter ADC Ch Six voltage too high alarm is enabled." + ::= { aprisaXETxADCChSixHiAlarm 4 } + +aprisaXETxADCChSixHiAlarmThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates the level at which the transmitter ADC Ch Six voltage too high + alarm will be set." + ::= { aprisaXETxADCChSixHiAlarm 5 } + +aprisaXETxADCChSixHiAlarmClearThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates the level at which the transmitter ADC Ch Six voltage too high + will be cleared." + ::= { aprisaXETxADCChSixHiAlarm 6 } + +aprisaXETxADCChSixHiAlarmsGroup OBJECT-GROUP + OBJECTS { aprisaXETxADCChSixHiAlarmName, + aprisaXETxADCChSixHiAlarmStatus, + aprisaXETxADCChSixHiAlarmSeverity, + aprisaXETxADCChSixHiAlarmEnabled, + aprisaXETxADCChSixHiAlarmThreshold, + aprisaXETxADCChSixHiAlarmClearThreshold + } + STATUS current + DESCRIPTION "The aprisaXETx transmitter ADC Ch Six voltage too high alarm group." + ::= { aprisaXEGroups 262 } + + +aprisaXETxADCChSixLoAlarm OBJECT IDENTIFIER ::= { aprisaXETransmitterAlarms 36 } + +aprisaXETxADCChSixLoAlarmName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The name of the transmitter ADC Ch Six voltage too low alarm." + ::= { aprisaXETxADCChSixLoAlarm 1 } + +aprisaXETxADCChSixLoAlarmStatus OBJECT-TYPE + SYNTAX FourRFAlarmStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The status of the transmitter ADC Ch Six voltage too low alarm." + ::= { aprisaXETxADCChSixLoAlarm 2 } + +aprisaXETxADCChSixLoAlarmSeverity OBJECT-TYPE + SYNTAX FourRFAlarmSeverity + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The severity of the transmitter ADC Ch Six voltage too low alarm." + ::= { aprisaXETxADCChSixLoAlarm 3 } + +aprisaXETxADCChSixLoAlarmEnabled OBJECT-TYPE + SYNTAX FourRFAlarmEnabled + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates whether the transmitter ADC Ch Six voltage too low alarm is enabled." + ::= { aprisaXETxADCChSixLoAlarm 4 } + +aprisaXETxADCChSixLoAlarmThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates the level at wLoch the transmitter ADC Ch Six voltage too low + alarm will be set." + ::= { aprisaXETxADCChSixLoAlarm 5 } + +aprisaXETxADCChSixLoAlarmClearThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates the level at wLoch the transmitter ADC Ch Six voltage too low + will be cleared." + ::= { aprisaXETxADCChSixLoAlarm 6 } + +aprisaXETxADCChSixLoAlarmsGroup OBJECT-GROUP + OBJECTS { aprisaXETxADCChSixLoAlarmName, + aprisaXETxADCChSixLoAlarmStatus, + aprisaXETxADCChSixLoAlarmSeverity, + aprisaXETxADCChSixLoAlarmEnabled, + aprisaXETxADCChSixLoAlarmThreshold, + aprisaXETxADCChSixLoAlarmClearThreshold + } + STATUS current + DESCRIPTION "The aprisaXETx transmitter ADC Ch Six voltage too High alarm group." + ::= { aprisaXEGroups 263 } + + +aprisaXETxADCChSevenHiAlarm OBJECT IDENTIFIER ::= { aprisaXETransmitterAlarms 37 } + +aprisaXETxADCChSevenHiAlarmName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The name of the transmitter ADC Ch Seven voltage too high alarm." + ::= { aprisaXETxADCChSevenHiAlarm 1 } + +aprisaXETxADCChSevenHiAlarmStatus OBJECT-TYPE + SYNTAX FourRFAlarmStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The status of the transmitter ADC Ch Seven voltage too high alarm." + ::= { aprisaXETxADCChSevenHiAlarm 2 } + +aprisaXETxADCChSevenHiAlarmSeverity OBJECT-TYPE + SYNTAX FourRFAlarmSeverity + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The severity of the transmitter ADC Ch Seven voltage too high alarm." + ::= { aprisaXETxADCChSevenHiAlarm 3 } + +aprisaXETxADCChSevenHiAlarmEnabled OBJECT-TYPE + SYNTAX FourRFAlarmEnabled + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates whether the transmitter ADC Ch Seven voltage too high alarm is enabled." + ::= { aprisaXETxADCChSevenHiAlarm 4 } + +aprisaXETxADCChSevenHiAlarmThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates the level at which the transmitter ADC Ch Seven voltage too high + alarm will be set." + ::= { aprisaXETxADCChSevenHiAlarm 5 } + +aprisaXETxADCChSevenHiAlarmClearThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates the level at which the transmitter ADC Ch Seven voltage too high + will be cleared." + ::= { aprisaXETxADCChSevenHiAlarm 6 } + +aprisaXETxADCChSevenHiAlarmsGroup OBJECT-GROUP + OBJECTS { aprisaXETxADCChSevenHiAlarmName, + aprisaXETxADCChSevenHiAlarmStatus, + aprisaXETxADCChSevenHiAlarmSeverity, + aprisaXETxADCChSevenHiAlarmEnabled, + aprisaXETxADCChSevenHiAlarmThreshold, + aprisaXETxADCChSevenHiAlarmClearThreshold + } + STATUS current + DESCRIPTION "The aprisaXETx transmitter ADC Ch Seven voltage too high alarm group." + ::= { aprisaXEGroups 264 } + + +aprisaXETxADCChSevenLoAlarm OBJECT IDENTIFIER ::= { aprisaXETransmitterAlarms 38 } + +aprisaXETxADCChSevenLoAlarmName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The name of the transmitter ADC Ch Seven voltage too low alarm." + ::= { aprisaXETxADCChSevenLoAlarm 1 } + +aprisaXETxADCChSevenLoAlarmStatus OBJECT-TYPE + SYNTAX FourRFAlarmStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The status of the transmitter ADC Ch Seven voltage too low alarm." + ::= { aprisaXETxADCChSevenLoAlarm 2 } + +aprisaXETxADCChSevenLoAlarmSeverity OBJECT-TYPE + SYNTAX FourRFAlarmSeverity + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The severity of the transmitter ADC Ch Seven voltage too low alarm." + ::= { aprisaXETxADCChSevenLoAlarm 3 } + +aprisaXETxADCChSevenLoAlarmEnabled OBJECT-TYPE + SYNTAX FourRFAlarmEnabled + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates whether the transmitter ADC Ch Seven voltage too low alarm is enabled." + ::= { aprisaXETxADCChSevenLoAlarm 4 } + +aprisaXETxADCChSevenLoAlarmThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates the level at wLoch the transmitter ADC Ch Seven voltage too low + alarm will be set." + ::= { aprisaXETxADCChSevenLoAlarm 5 } + +aprisaXETxADCChSevenLoAlarmClearThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates the level at wLoch the transmitter ADC Ch Seven voltage too low + will be cleared." + ::= { aprisaXETxADCChSevenLoAlarm 6 } + +aprisaXETxADCChSevenLoAlarmsGroup OBJECT-GROUP + OBJECTS { aprisaXETxADCChSevenLoAlarmName, + aprisaXETxADCChSevenLoAlarmStatus, + aprisaXETxADCChSevenLoAlarmSeverity, + aprisaXETxADCChSevenLoAlarmEnabled, + aprisaXETxADCChSevenLoAlarmThreshold, + aprisaXETxADCChSevenLoAlarmClearThreshold + } + STATUS current + DESCRIPTION "The aprisaXETx transmitter ADC Ch Seven voltage too High alarm group." + ::= { aprisaXEGroups 265 } + + +aprisaXETxADCChEightHiAlarm OBJECT IDENTIFIER ::= { aprisaXETransmitterAlarms 39 } + +aprisaXETxADCChEightHiAlarmName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The name of the transmitter ADC Ch Eight voltage too high alarm." + ::= { aprisaXETxADCChEightHiAlarm 1 } + +aprisaXETxADCChEightHiAlarmStatus OBJECT-TYPE + SYNTAX FourRFAlarmStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The status of the transmitter ADC Ch Eight voltage too high alarm." + ::= { aprisaXETxADCChEightHiAlarm 2 } + +aprisaXETxADCChEightHiAlarmSeverity OBJECT-TYPE + SYNTAX FourRFAlarmSeverity + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The severity of the transmitter ADC Ch Eight voltage too high alarm." + ::= { aprisaXETxADCChEightHiAlarm 3 } + +aprisaXETxADCChEightHiAlarmEnabled OBJECT-TYPE + SYNTAX FourRFAlarmEnabled + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates whether the transmitter ADC Ch Eight voltage too high alarm is enabled." + ::= { aprisaXETxADCChEightHiAlarm 4 } + +aprisaXETxADCChEightHiAlarmThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates the level at which the transmitter ADC Ch Eight voltage too high + alarm will be set." + ::= { aprisaXETxADCChEightHiAlarm 5 } + +aprisaXETxADCChEightHiAlarmClearThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates the level at which the transmitter ADC Ch Eight voltage too high + will be cleared." + ::= { aprisaXETxADCChEightHiAlarm 6 } + +aprisaXETxADCChEightHiAlarmsGroup OBJECT-GROUP + OBJECTS { aprisaXETxADCChEightHiAlarmName, + aprisaXETxADCChEightHiAlarmStatus, + aprisaXETxADCChEightHiAlarmSeverity, + aprisaXETxADCChEightHiAlarmEnabled, + aprisaXETxADCChEightHiAlarmThreshold, + aprisaXETxADCChEightHiAlarmClearThreshold + } + STATUS current + DESCRIPTION "The aprisaXETx transmitter ADC Ch Eight voltage too high alarm group." + ::= { aprisaXEGroups 266 } + + +aprisaXETxADCChEightLoAlarm OBJECT IDENTIFIER ::= { aprisaXETransmitterAlarms 40 } + +aprisaXETxADCChEightLoAlarmName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The name of the transmitter ADC Ch Eight voltage too low alarm." + ::= { aprisaXETxADCChEightLoAlarm 1 } + +aprisaXETxADCChEightLoAlarmStatus OBJECT-TYPE + SYNTAX FourRFAlarmStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The status of the transmitter ADC Ch Eight voltage too low alarm." + ::= { aprisaXETxADCChEightLoAlarm 2 } + +aprisaXETxADCChEightLoAlarmSeverity OBJECT-TYPE + SYNTAX FourRFAlarmSeverity + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The severity of the transmitter ADC Ch Eight voltage too low alarm." + ::= { aprisaXETxADCChEightLoAlarm 3 } + +aprisaXETxADCChEightLoAlarmEnabled OBJECT-TYPE + SYNTAX FourRFAlarmEnabled + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates whether the transmitter ADC Ch Eight voltage too low alarm is enabled." + ::= { aprisaXETxADCChEightLoAlarm 4 } + +aprisaXETxADCChEightLoAlarmThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates the level at wLoch the transmitter ADC Ch Eight voltage too low + alarm will be set." + ::= { aprisaXETxADCChEightLoAlarm 5 } + +aprisaXETxADCChEightLoAlarmClearThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates the level at wLoch the transmitter ADC Ch Eight voltage too low + will be cleared." + ::= { aprisaXETxADCChEightLoAlarm 6 } + +aprisaXETxADCChEightLoAlarmsGroup OBJECT-GROUP + OBJECTS { aprisaXETxADCChEightLoAlarmName, + aprisaXETxADCChEightLoAlarmStatus, + aprisaXETxADCChEightLoAlarmSeverity, + aprisaXETxADCChEightLoAlarmEnabled, + aprisaXETxADCChEightLoAlarmThreshold, + aprisaXETxADCChEightLoAlarmClearThreshold + } + STATUS current + DESCRIPTION "The aprisaXETx transmitter ADC Ch Eight voltage too High alarm group." + ::= { aprisaXEGroups 267 } + + +aprisaXETxADCChNineHiAlarm OBJECT IDENTIFIER ::= { aprisaXETransmitterAlarms 41 } + +aprisaXETxADCChNineHiAlarmName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The name of the transmitter ADC Ch Nine voltage too high alarm." + ::= { aprisaXETxADCChNineHiAlarm 1 } + +aprisaXETxADCChNineHiAlarmStatus OBJECT-TYPE + SYNTAX FourRFAlarmStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The status of the transmitter ADC Ch Nine voltage too high alarm." + ::= { aprisaXETxADCChNineHiAlarm 2 } + +aprisaXETxADCChNineHiAlarmSeverity OBJECT-TYPE + SYNTAX FourRFAlarmSeverity + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The severity of the transmitter ADC Ch Nine voltage too high alarm." + ::= { aprisaXETxADCChNineHiAlarm 3 } + +aprisaXETxADCChNineHiAlarmEnabled OBJECT-TYPE + SYNTAX FourRFAlarmEnabled + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates whether the transmitter ADC Ch Nine voltage too high alarm is enabled." + ::= { aprisaXETxADCChNineHiAlarm 4 } + +aprisaXETxADCChNineHiAlarmThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates the level at which the transmitter ADC Ch Nine voltage too high + alarm will be set." + ::= { aprisaXETxADCChNineHiAlarm 5 } + +aprisaXETxADCChNineHiAlarmClearThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates the level at which the transmitter ADC Ch Nine voltage too high + will be cleared." + ::= { aprisaXETxADCChNineHiAlarm 6 } + +aprisaXETxADCChNineHiAlarmsGroup OBJECT-GROUP + OBJECTS { aprisaXETxADCChNineHiAlarmName, + aprisaXETxADCChNineHiAlarmStatus, + aprisaXETxADCChNineHiAlarmSeverity, + aprisaXETxADCChNineHiAlarmEnabled, + aprisaXETxADCChNineHiAlarmThreshold, + aprisaXETxADCChNineHiAlarmClearThreshold + } + STATUS current + DESCRIPTION "The aprisaXETx transmitter ADC Ch Nine voltage too high alarm group." + ::= { aprisaXEGroups 268 } + + +aprisaXETxADCChNineLoAlarm OBJECT IDENTIFIER ::= { aprisaXETransmitterAlarms 42 } + +aprisaXETxADCChNineLoAlarmName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The name of the transmitter ADC Ch Nine voltage too low alarm." + ::= { aprisaXETxADCChNineLoAlarm 1 } + +aprisaXETxADCChNineLoAlarmStatus OBJECT-TYPE + SYNTAX FourRFAlarmStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The status of the transmitter ADC Ch Nine voltage too low alarm." + ::= { aprisaXETxADCChNineLoAlarm 2 } + +aprisaXETxADCChNineLoAlarmSeverity OBJECT-TYPE + SYNTAX FourRFAlarmSeverity + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The severity of the transmitter ADC Ch Nine voltage too low alarm." + ::= { aprisaXETxADCChNineLoAlarm 3 } + +aprisaXETxADCChNineLoAlarmEnabled OBJECT-TYPE + SYNTAX FourRFAlarmEnabled + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates whether the transmitter ADC Ch Nine voltage too low alarm is enabled." + ::= { aprisaXETxADCChNineLoAlarm 4 } + +aprisaXETxADCChNineLoAlarmThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates the level at wLoch the transmitter ADC Ch Nine voltage too low + alarm will be set." + ::= { aprisaXETxADCChNineLoAlarm 5 } + +aprisaXETxADCChNineLoAlarmClearThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates the level at wLoch the transmitter ADC Ch Nine voltage too low + will be cleared." + ::= { aprisaXETxADCChNineLoAlarm 6 } + +aprisaXETxADCChNineLoAlarmsGroup OBJECT-GROUP + OBJECTS { aprisaXETxADCChNineLoAlarmName, + aprisaXETxADCChNineLoAlarmStatus, + aprisaXETxADCChNineLoAlarmSeverity, + aprisaXETxADCChNineLoAlarmEnabled, + aprisaXETxADCChNineLoAlarmThreshold, + aprisaXETxADCChNineLoAlarmClearThreshold + } + STATUS current + DESCRIPTION "The aprisaXETx transmitter ADC Ch Nine voltage too High alarm group." + ::= { aprisaXEGroups 269 } + + +aprisaXETxADCChTenHiAlarm OBJECT IDENTIFIER ::= { aprisaXETransmitterAlarms 43 } + +aprisaXETxADCChTenHiAlarmName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The name of the transmitter ADC Ch Ten voltage too high alarm." + ::= { aprisaXETxADCChTenHiAlarm 1 } + +aprisaXETxADCChTenHiAlarmStatus OBJECT-TYPE + SYNTAX FourRFAlarmStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The status of the transmitter ADC Ch Ten voltage too high alarm." + ::= { aprisaXETxADCChTenHiAlarm 2 } + +aprisaXETxADCChTenHiAlarmSeverity OBJECT-TYPE + SYNTAX FourRFAlarmSeverity + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The severity of the transmitter ADC Ch Ten voltage too high alarm." + ::= { aprisaXETxADCChTenHiAlarm 3 } + +aprisaXETxADCChTenHiAlarmEnabled OBJECT-TYPE + SYNTAX FourRFAlarmEnabled + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates whether the transmitter ADC Ch Ten voltage too high alarm is enabled." + ::= { aprisaXETxADCChTenHiAlarm 4 } + +aprisaXETxADCChTenHiAlarmThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates the level at which the transmitter ADC Ch Ten voltage too high + alarm will be set." + ::= { aprisaXETxADCChTenHiAlarm 5 } + +aprisaXETxADCChTenHiAlarmClearThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates the level at which the transmitter ADC Ch Ten voltage too high + will be cleared." + ::= { aprisaXETxADCChTenHiAlarm 6 } + +aprisaXETxADCChTenHiAlarmsGroup OBJECT-GROUP + OBJECTS { aprisaXETxADCChTenHiAlarmName, + aprisaXETxADCChTenHiAlarmStatus, + aprisaXETxADCChTenHiAlarmSeverity, + aprisaXETxADCChTenHiAlarmEnabled, + aprisaXETxADCChTenHiAlarmThreshold, + aprisaXETxADCChTenHiAlarmClearThreshold + } + STATUS current + DESCRIPTION "The aprisaXETx transmitter ADC Ch Ten voltage too high alarm group." + ::= { aprisaXEGroups 270 } + + +aprisaXETxADCChTenLoAlarm OBJECT IDENTIFIER ::= { aprisaXETransmitterAlarms 44 } + +aprisaXETxADCChTenLoAlarmName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The name of the transmitter ADC Ch Ten voltage too low alarm." + ::= { aprisaXETxADCChTenLoAlarm 1 } + +aprisaXETxADCChTenLoAlarmStatus OBJECT-TYPE + SYNTAX FourRFAlarmStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The status of the transmitter ADC Ch Ten voltage too low alarm." + ::= { aprisaXETxADCChTenLoAlarm 2 } + +aprisaXETxADCChTenLoAlarmSeverity OBJECT-TYPE + SYNTAX FourRFAlarmSeverity + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The severity of the transmitter ADC Ch Ten voltage too low alarm." + ::= { aprisaXETxADCChTenLoAlarm 3 } + +aprisaXETxADCChTenLoAlarmEnabled OBJECT-TYPE + SYNTAX FourRFAlarmEnabled + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates whether the transmitter ADC Ch Ten voltage too low alarm is enabled." + ::= { aprisaXETxADCChTenLoAlarm 4 } + +aprisaXETxADCChTenLoAlarmThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates the level at wLoch the transmitter ADC Ch Ten voltage too low + alarm will be set." + ::= { aprisaXETxADCChTenLoAlarm 5 } + +aprisaXETxADCChTenLoAlarmClearThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates the level at wLoch the transmitter ADC Ch Ten voltage too low + will be cleared." + ::= { aprisaXETxADCChTenLoAlarm 6 } + +aprisaXETxADCChTenLoAlarmsGroup OBJECT-GROUP + OBJECTS { aprisaXETxADCChTenLoAlarmName, + aprisaXETxADCChTenLoAlarmStatus, + aprisaXETxADCChTenLoAlarmSeverity, + aprisaXETxADCChTenLoAlarmEnabled, + aprisaXETxADCChTenLoAlarmThreshold, + aprisaXETxADCChTenLoAlarmClearThreshold + } + STATUS current + DESCRIPTION "The aprisaXETx transmitter ADC Ch Ten voltage too High alarm group." + ::= { aprisaXEGroups 271 } + + +aprisaXETxADCChElevenHiAlarm OBJECT IDENTIFIER ::= { aprisaXETransmitterAlarms 45 } + +aprisaXETxADCChElevenHiAlarmName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The name of the transmitter ADC Ch Eleven voltage too high alarm." + ::= { aprisaXETxADCChElevenHiAlarm 1 } + +aprisaXETxADCChElevenHiAlarmStatus OBJECT-TYPE + SYNTAX FourRFAlarmStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The status of the transmitter ADC Ch Eleven voltage too high alarm." + ::= { aprisaXETxADCChElevenHiAlarm 2 } + +aprisaXETxADCChElevenHiAlarmSeverity OBJECT-TYPE + SYNTAX FourRFAlarmSeverity + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The severity of the transmitter ADC Ch Eleven voltage too high alarm." + ::= { aprisaXETxADCChElevenHiAlarm 3 } + +aprisaXETxADCChElevenHiAlarmEnabled OBJECT-TYPE + SYNTAX FourRFAlarmEnabled + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates whether the transmitter ADC Ch Eleven voltage too high alarm is enabled." + ::= { aprisaXETxADCChElevenHiAlarm 4 } + +aprisaXETxADCChElevenHiAlarmThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates the level at which the transmitter ADC Ch Eleven voltage too high + alarm will be set." + ::= { aprisaXETxADCChElevenHiAlarm 5 } + +aprisaXETxADCChElevenHiAlarmClearThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates the level at which the transmitter ADC Ch Eleven voltage too high + will be cleared." + ::= { aprisaXETxADCChElevenHiAlarm 6 } + +aprisaXETxADCChElevenHiAlarmsGroup OBJECT-GROUP + OBJECTS { aprisaXETxADCChElevenHiAlarmName, + aprisaXETxADCChElevenHiAlarmStatus, + aprisaXETxADCChElevenHiAlarmSeverity, + aprisaXETxADCChElevenHiAlarmEnabled, + aprisaXETxADCChElevenHiAlarmThreshold, + aprisaXETxADCChElevenHiAlarmClearThreshold + } + STATUS current + DESCRIPTION "The aprisaXETx transmitter ADC Ch Eleven voltage too high alarm group." + ::= { aprisaXEGroups 272 } + + +aprisaXETxADCChElevenLoAlarm OBJECT IDENTIFIER ::= { aprisaXETransmitterAlarms 46 } + +aprisaXETxADCChElevenLoAlarmName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The name of the transmitter ADC Ch Eleven voltage too low alarm." + ::= { aprisaXETxADCChElevenLoAlarm 1 } + +aprisaXETxADCChElevenLoAlarmStatus OBJECT-TYPE + SYNTAX FourRFAlarmStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The status of the transmitter ADC Ch Eleven voltage too low alarm." + ::= { aprisaXETxADCChElevenLoAlarm 2 } + +aprisaXETxADCChElevenLoAlarmSeverity OBJECT-TYPE + SYNTAX FourRFAlarmSeverity + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The severity of the transmitter ADC Ch Eleven voltage too low alarm." + ::= { aprisaXETxADCChElevenLoAlarm 3 } + +aprisaXETxADCChElevenLoAlarmEnabled OBJECT-TYPE + SYNTAX FourRFAlarmEnabled + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates whether the transmitter ADC Ch Eleven voltage too low alarm is enabled." + ::= { aprisaXETxADCChElevenLoAlarm 4 } + +aprisaXETxADCChElevenLoAlarmThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates the level at wLoch the transmitter ADC Ch Eleven voltage too low + alarm will be set." + ::= { aprisaXETxADCChElevenLoAlarm 5 } + +aprisaXETxADCChElevenLoAlarmClearThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates the level at wLoch the transmitter ADC Ch Eleven voltage too low + will be cleared." + ::= { aprisaXETxADCChElevenLoAlarm 6 } + +aprisaXETxADCChElevenLoAlarmsGroup OBJECT-GROUP + OBJECTS { aprisaXETxADCChElevenLoAlarmName, + aprisaXETxADCChElevenLoAlarmStatus, + aprisaXETxADCChElevenLoAlarmSeverity, + aprisaXETxADCChElevenLoAlarmEnabled, + aprisaXETxADCChElevenLoAlarmThreshold, + aprisaXETxADCChElevenLoAlarmClearThreshold + } + STATUS current + DESCRIPTION "The aprisaXETx transmitter ADC Ch Eleven voltage too High alarm group." + ::= { aprisaXEGroups 273 } + +-- *************************************************************************** +-- End of the Generic Transmitter alarms +-- *************************************************************************** + + + +-- *************************************************************************** +-- The Generic Receiver Alarms +-- *************************************************************************** + +aprisaXERxADCChZeroHiAlarm OBJECT IDENTIFIER ::= { aprisaXEReceiverAlarms 19 } + +aprisaXERxADCChZeroHiAlarmName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The name of the receiver ADC Ch Zero voltage too high alarm." + ::= { aprisaXERxADCChZeroHiAlarm 1 } + +aprisaXERxADCChZeroHiAlarmStatus OBJECT-TYPE + SYNTAX FourRFAlarmStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The status of the receiver ADC Ch Zero voltage too high alarm." + ::= { aprisaXERxADCChZeroHiAlarm 2 } + +aprisaXERxADCChZeroHiAlarmSeverity OBJECT-TYPE + SYNTAX FourRFAlarmSeverity + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The severity of the receiver ADC Ch Zero voltage too high alarm." + ::= { aprisaXERxADCChZeroHiAlarm 3 } + +aprisaXERxADCChZeroHiAlarmEnabled OBJECT-TYPE + SYNTAX FourRFAlarmEnabled + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates whether the receiver ADC Ch Zero voltage too high alarm is enabled." + ::= { aprisaXERxADCChZeroHiAlarm 4 } + +aprisaXERxADCChZeroHiAlarmThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates the level at which the receiver ADC Ch Zero voltage too high + alarm will be set." + ::= { aprisaXERxADCChZeroHiAlarm 5 } + +aprisaXERxADCChZeroHiAlarmClearThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates the level at which the receiver ADC Ch Zero voltage too high + will be cleared." + ::= { aprisaXERxADCChZeroHiAlarm 6 } + +aprisaXERxADCChZeroHiAlarmsGroup OBJECT-GROUP + OBJECTS { aprisaXERxADCChZeroHiAlarmName, + aprisaXERxADCChZeroHiAlarmStatus, + aprisaXERxADCChZeroHiAlarmSeverity, + aprisaXERxADCChZeroHiAlarmEnabled, + aprisaXERxADCChZeroHiAlarmThreshold, + aprisaXERxADCChZeroHiAlarmClearThreshold + } + STATUS current + DESCRIPTION "The aprisaXERx receiver ADC Ch Zero voltage too high alarm group." + ::= { aprisaXEGroups 275 } + + +aprisaXERxADCChZeroLoAlarm OBJECT IDENTIFIER ::= { aprisaXEReceiverAlarms 20 } + +aprisaXERxADCChZeroLoAlarmName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The name of the receiver ADC Ch Zero voltage too low alarm." + ::= { aprisaXERxADCChZeroLoAlarm 1 } + +aprisaXERxADCChZeroLoAlarmStatus OBJECT-TYPE + SYNTAX FourRFAlarmStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The status of the receiver ADC Ch Zero voltage too low alarm." + ::= { aprisaXERxADCChZeroLoAlarm 2 } + +aprisaXERxADCChZeroLoAlarmSeverity OBJECT-TYPE + SYNTAX FourRFAlarmSeverity + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The severity of the receiver ADC Ch Zero voltage too low alarm." + ::= { aprisaXERxADCChZeroLoAlarm 3 } + +aprisaXERxADCChZeroLoAlarmEnabled OBJECT-TYPE + SYNTAX FourRFAlarmEnabled + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates whether the receiver ADC Ch Zero voltage too low alarm is enabled." + ::= { aprisaXERxADCChZeroLoAlarm 4 } + +aprisaXERxADCChZeroLoAlarmThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates the level at wLoch the receiver ADC Ch Zero voltage too low + alarm will be set." + ::= { aprisaXERxADCChZeroLoAlarm 5 } + +aprisaXERxADCChZeroLoAlarmClearThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates the level at wLoch the receiver ADC Ch Zero voltage too low + will be cleared." + ::= { aprisaXERxADCChZeroLoAlarm 6 } + +aprisaXERxADCChZeroLoAlarmsGroup OBJECT-GROUP + OBJECTS { aprisaXERxADCChZeroLoAlarmName, + aprisaXERxADCChZeroLoAlarmStatus, + aprisaXERxADCChZeroLoAlarmSeverity, + aprisaXERxADCChZeroLoAlarmEnabled, + aprisaXERxADCChZeroLoAlarmThreshold, + aprisaXERxADCChZeroLoAlarmClearThreshold + } + STATUS current + DESCRIPTION "The aprisaXERx receiver ADC Ch Zero voltage too High alarm group." + ::= { aprisaXEGroups 276 } + + +aprisaXERxADCChOneHiAlarm OBJECT IDENTIFIER ::= { aprisaXEReceiverAlarms 21 } + +aprisaXERxADCChOneHiAlarmName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The name of the receiver ADC Ch One voltage too high alarm." + ::= { aprisaXERxADCChOneHiAlarm 1 } + +aprisaXERxADCChOneHiAlarmStatus OBJECT-TYPE + SYNTAX FourRFAlarmStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The status of the receiver ADC Ch One voltage too high alarm." + ::= { aprisaXERxADCChOneHiAlarm 2 } + +aprisaXERxADCChOneHiAlarmSeverity OBJECT-TYPE + SYNTAX FourRFAlarmSeverity + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The severity of the receiver ADC Ch One voltage too high alarm." + ::= { aprisaXERxADCChOneHiAlarm 3 } + +aprisaXERxADCChOneHiAlarmEnabled OBJECT-TYPE + SYNTAX FourRFAlarmEnabled + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates whether the receiver ADC Ch One voltage too high alarm is enabled." + ::= { aprisaXERxADCChOneHiAlarm 4 } + +aprisaXERxADCChOneHiAlarmThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates the level at which the receiver ADC Ch One voltage too high + alarm will be set." + ::= { aprisaXERxADCChOneHiAlarm 5 } + +aprisaXERxADCChOneHiAlarmClearThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates the level at which the receiver ADC Ch One voltage too high + will be cleared." + ::= { aprisaXERxADCChOneHiAlarm 6 } + +aprisaXERxADCChOneHiAlarmsGroup OBJECT-GROUP + OBJECTS { aprisaXERxADCChOneHiAlarmName, + aprisaXERxADCChOneHiAlarmStatus, + aprisaXERxADCChOneHiAlarmSeverity, + aprisaXERxADCChOneHiAlarmEnabled, + aprisaXERxADCChOneHiAlarmThreshold, + aprisaXERxADCChOneHiAlarmClearThreshold + } + STATUS current + DESCRIPTION "The aprisaXERx receiver ADC Ch One voltage too high alarm group." + ::= { aprisaXEGroups 277 } + + +aprisaXERxADCChOneLoAlarm OBJECT IDENTIFIER ::= { aprisaXEReceiverAlarms 22 } + +aprisaXERxADCChOneLoAlarmName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The name of the receiver ADC Ch One voltage too low alarm." + ::= { aprisaXERxADCChOneLoAlarm 1 } + +aprisaXERxADCChOneLoAlarmStatus OBJECT-TYPE + SYNTAX FourRFAlarmStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The status of the receiver ADC Ch One voltage too low alarm." + ::= { aprisaXERxADCChOneLoAlarm 2 } + +aprisaXERxADCChOneLoAlarmSeverity OBJECT-TYPE + SYNTAX FourRFAlarmSeverity + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The severity of the receiver ADC Ch One voltage too low alarm." + ::= { aprisaXERxADCChOneLoAlarm 3 } + +aprisaXERxADCChOneLoAlarmEnabled OBJECT-TYPE + SYNTAX FourRFAlarmEnabled + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates whether the receiver ADC Ch One voltage too low alarm is enabled." + ::= { aprisaXERxADCChOneLoAlarm 4 } + +aprisaXERxADCChOneLoAlarmThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates the level at wLoch the receiver ADC Ch One voltage too low + alarm will be set." + ::= { aprisaXERxADCChOneLoAlarm 5 } + +aprisaXERxADCChOneLoAlarmClearThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates the level at wLoch the receiver ADC Ch One voltage too low + will be cleared." + ::= { aprisaXERxADCChOneLoAlarm 6 } + +aprisaXERxADCChOneLoAlarmsGroup OBJECT-GROUP + OBJECTS { aprisaXERxADCChOneLoAlarmName, + aprisaXERxADCChOneLoAlarmStatus, + aprisaXERxADCChOneLoAlarmSeverity, + aprisaXERxADCChOneLoAlarmEnabled, + aprisaXERxADCChOneLoAlarmThreshold, + aprisaXERxADCChOneLoAlarmClearThreshold + } + STATUS current + DESCRIPTION "The aprisaXERx receiver ADC Ch One voltage too High alarm group." + ::= { aprisaXEGroups 278 } + + +aprisaXERxADCChTwoHiAlarm OBJECT IDENTIFIER ::= { aprisaXEReceiverAlarms 23 } + +aprisaXERxADCChTwoHiAlarmName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The name of the receiver ADC Ch Two voltage too high alarm." + ::= { aprisaXERxADCChTwoHiAlarm 1 } + +aprisaXERxADCChTwoHiAlarmStatus OBJECT-TYPE + SYNTAX FourRFAlarmStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The status of the receiver ADC Ch Two voltage too high alarm." + ::= { aprisaXERxADCChTwoHiAlarm 2 } + +aprisaXERxADCChTwoHiAlarmSeverity OBJECT-TYPE + SYNTAX FourRFAlarmSeverity + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The severity of the receiver ADC Ch Two voltage too high alarm." + ::= { aprisaXERxADCChTwoHiAlarm 3 } + +aprisaXERxADCChTwoHiAlarmEnabled OBJECT-TYPE + SYNTAX FourRFAlarmEnabled + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates whether the receiver ADC Ch Two voltage too high alarm is enabled." + ::= { aprisaXERxADCChTwoHiAlarm 4 } + +aprisaXERxADCChTwoHiAlarmThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates the level at which the receiver ADC Ch Two voltage too high + alarm will be set." + ::= { aprisaXERxADCChTwoHiAlarm 5 } + +aprisaXERxADCChTwoHiAlarmClearThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates the level at which the receiver ADC Ch Two voltage too high + will be cleared." + ::= { aprisaXERxADCChTwoHiAlarm 6 } + +aprisaXERxADCChTwoHiAlarmsGroup OBJECT-GROUP + OBJECTS { aprisaXERxADCChTwoHiAlarmName, + aprisaXERxADCChTwoHiAlarmStatus, + aprisaXERxADCChTwoHiAlarmSeverity, + aprisaXERxADCChTwoHiAlarmEnabled, + aprisaXERxADCChTwoHiAlarmThreshold, + aprisaXERxADCChTwoHiAlarmClearThreshold + } + STATUS current + DESCRIPTION "The aprisaXERx receiver ADC Ch Two voltage too high alarm group." + ::= { aprisaXEGroups 279 } + + +aprisaXERxADCChTwoLoAlarm OBJECT IDENTIFIER ::= { aprisaXEReceiverAlarms 24 } + +aprisaXERxADCChTwoLoAlarmName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The name of the receiver ADC Ch Two voltage too low alarm." + ::= { aprisaXERxADCChTwoLoAlarm 1 } + +aprisaXERxADCChTwoLoAlarmStatus OBJECT-TYPE + SYNTAX FourRFAlarmStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The status of the receiver ADC Ch Two voltage too low alarm." + ::= { aprisaXERxADCChTwoLoAlarm 2 } + +aprisaXERxADCChTwoLoAlarmSeverity OBJECT-TYPE + SYNTAX FourRFAlarmSeverity + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The severity of the receiver ADC Ch Two voltage too low alarm." + ::= { aprisaXERxADCChTwoLoAlarm 3 } + +aprisaXERxADCChTwoLoAlarmEnabled OBJECT-TYPE + SYNTAX FourRFAlarmEnabled + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates whether the receiver ADC Ch Two voltage too low alarm is enabled." + ::= { aprisaXERxADCChTwoLoAlarm 4 } + +aprisaXERxADCChTwoLoAlarmThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates the level at wLoch the receiver ADC Ch Two voltage too low + alarm will be set." + ::= { aprisaXERxADCChTwoLoAlarm 5 } + +aprisaXERxADCChTwoLoAlarmClearThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates the level at wLoch the receiver ADC Ch Two voltage too low + will be cleared." + ::= { aprisaXERxADCChTwoLoAlarm 6 } + +aprisaXERxADCChTwoLoAlarmsGroup OBJECT-GROUP + OBJECTS { aprisaXERxADCChTwoLoAlarmName, + aprisaXERxADCChTwoLoAlarmStatus, + aprisaXERxADCChTwoLoAlarmSeverity, + aprisaXERxADCChTwoLoAlarmEnabled, + aprisaXERxADCChTwoLoAlarmThreshold, + aprisaXERxADCChTwoLoAlarmClearThreshold + } + STATUS current + DESCRIPTION "The aprisaXERx receiver ADC Ch Two voltage too High alarm group." + ::= { aprisaXEGroups 280 } + + +aprisaXERxADCChThreeHiAlarm OBJECT IDENTIFIER ::= { aprisaXEReceiverAlarms 25 } + +aprisaXERxADCChThreeHiAlarmName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The name of the receiver ADC Ch Three voltage too high alarm." + ::= { aprisaXERxADCChThreeHiAlarm 1 } + +aprisaXERxADCChThreeHiAlarmStatus OBJECT-TYPE + SYNTAX FourRFAlarmStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The status of the receiver ADC Ch Three voltage too high alarm." + ::= { aprisaXERxADCChThreeHiAlarm 2 } + +aprisaXERxADCChThreeHiAlarmSeverity OBJECT-TYPE + SYNTAX FourRFAlarmSeverity + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The severity of the receiver ADC Ch Three voltage too high alarm." + ::= { aprisaXERxADCChThreeHiAlarm 3 } + +aprisaXERxADCChThreeHiAlarmEnabled OBJECT-TYPE + SYNTAX FourRFAlarmEnabled + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates whether the receiver ADC Ch Three voltage too high alarm is enabled." + ::= { aprisaXERxADCChThreeHiAlarm 4 } + +aprisaXERxADCChThreeHiAlarmThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates the level at which the receiver ADC Ch Three voltage too high + alarm will be set." + ::= { aprisaXERxADCChThreeHiAlarm 5 } + +aprisaXERxADCChThreeHiAlarmClearThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates the level at which the receiver ADC Ch Three voltage too high + will be cleared." + ::= { aprisaXERxADCChThreeHiAlarm 6 } + +aprisaXERxADCChThreeHiAlarmsGroup OBJECT-GROUP + OBJECTS { aprisaXERxADCChThreeHiAlarmName, + aprisaXERxADCChThreeHiAlarmStatus, + aprisaXERxADCChThreeHiAlarmSeverity, + aprisaXERxADCChThreeHiAlarmEnabled, + aprisaXERxADCChThreeHiAlarmThreshold, + aprisaXERxADCChThreeHiAlarmClearThreshold + } + STATUS current + DESCRIPTION "The aprisaXERx receiver ADC Ch Three voltage too high alarm group." + ::= { aprisaXEGroups 281 } + + +aprisaXERxADCChThreeLoAlarm OBJECT IDENTIFIER ::= { aprisaXEReceiverAlarms 26 } + +aprisaXERxADCChThreeLoAlarmName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The name of the receiver ADC Ch Three voltage too low alarm." + ::= { aprisaXERxADCChThreeLoAlarm 1 } + +aprisaXERxADCChThreeLoAlarmStatus OBJECT-TYPE + SYNTAX FourRFAlarmStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The status of the receiver ADC Ch Three voltage too low alarm." + ::= { aprisaXERxADCChThreeLoAlarm 2 } + +aprisaXERxADCChThreeLoAlarmSeverity OBJECT-TYPE + SYNTAX FourRFAlarmSeverity + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The severity of the receiver ADC Ch Three voltage too low alarm." + ::= { aprisaXERxADCChThreeLoAlarm 3 } + +aprisaXERxADCChThreeLoAlarmEnabled OBJECT-TYPE + SYNTAX FourRFAlarmEnabled + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates whether the receiver ADC Ch Three voltage too low alarm is enabled." + ::= { aprisaXERxADCChThreeLoAlarm 4 } + +aprisaXERxADCChThreeLoAlarmThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates the level at wLoch the receiver ADC Ch Three voltage too low + alarm will be set." + ::= { aprisaXERxADCChThreeLoAlarm 5 } + +aprisaXERxADCChThreeLoAlarmClearThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates the level at wLoch the receiver ADC Ch Three voltage too low + will be cleared." + ::= { aprisaXERxADCChThreeLoAlarm 6 } + +aprisaXERxADCChThreeLoAlarmsGroup OBJECT-GROUP + OBJECTS { aprisaXERxADCChThreeLoAlarmName, + aprisaXERxADCChThreeLoAlarmStatus, + aprisaXERxADCChThreeLoAlarmSeverity, + aprisaXERxADCChThreeLoAlarmEnabled, + aprisaXERxADCChThreeLoAlarmThreshold, + aprisaXERxADCChThreeLoAlarmClearThreshold + } + STATUS current + DESCRIPTION "The aprisaXERx receiver ADC Ch Three voltage too High alarm group." + ::= { aprisaXEGroups 282 } + + +aprisaXERxADCChFourHiAlarm OBJECT IDENTIFIER ::= { aprisaXEReceiverAlarms 27 } + +aprisaXERxADCChFourHiAlarmName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The name of the receiver ADC Ch Four voltage too high alarm." + ::= { aprisaXERxADCChFourHiAlarm 1 } + +aprisaXERxADCChFourHiAlarmStatus OBJECT-TYPE + SYNTAX FourRFAlarmStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The status of the receiver ADC Ch Four voltage too high alarm." + ::= { aprisaXERxADCChFourHiAlarm 2 } + +aprisaXERxADCChFourHiAlarmSeverity OBJECT-TYPE + SYNTAX FourRFAlarmSeverity + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The severity of the receiver ADC Ch Four voltage too high alarm." + ::= { aprisaXERxADCChFourHiAlarm 3 } + +aprisaXERxADCChFourHiAlarmEnabled OBJECT-TYPE + SYNTAX FourRFAlarmEnabled + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates whether the receiver ADC Ch Four voltage too high alarm is enabled." + ::= { aprisaXERxADCChFourHiAlarm 4 } + +aprisaXERxADCChFourHiAlarmThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates the level at which the receiver ADC Ch Four voltage too high + alarm will be set." + ::= { aprisaXERxADCChFourHiAlarm 5 } + +aprisaXERxADCChFourHiAlarmClearThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates the level at which the receiver ADC Ch Four voltage too high + will be cleared." + ::= { aprisaXERxADCChFourHiAlarm 6 } + +aprisaXERxADCChFourHiAlarmsGroup OBJECT-GROUP + OBJECTS { aprisaXERxADCChFourHiAlarmName, + aprisaXERxADCChFourHiAlarmStatus, + aprisaXERxADCChFourHiAlarmSeverity, + aprisaXERxADCChFourHiAlarmEnabled, + aprisaXERxADCChFourHiAlarmThreshold, + aprisaXERxADCChFourHiAlarmClearThreshold + } + STATUS current + DESCRIPTION "The aprisaXERx receiver ADC Ch Four voltage too high alarm group." + ::= { aprisaXEGroups 283 } + + +aprisaXERxADCChFourLoAlarm OBJECT IDENTIFIER ::= { aprisaXEReceiverAlarms 28 } + +aprisaXERxADCChFourLoAlarmName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The name of the receiver ADC Ch Four voltage too low alarm." + ::= { aprisaXERxADCChFourLoAlarm 1 } + +aprisaXERxADCChFourLoAlarmStatus OBJECT-TYPE + SYNTAX FourRFAlarmStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The status of the receiver ADC Ch Four voltage too low alarm." + ::= { aprisaXERxADCChFourLoAlarm 2 } + +aprisaXERxADCChFourLoAlarmSeverity OBJECT-TYPE + SYNTAX FourRFAlarmSeverity + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The severity of the receiver ADC Ch Four voltage too low alarm." + ::= { aprisaXERxADCChFourLoAlarm 3 } + +aprisaXERxADCChFourLoAlarmEnabled OBJECT-TYPE + SYNTAX FourRFAlarmEnabled + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates whether the receiver ADC Ch Four voltage too low alarm is enabled." + ::= { aprisaXERxADCChFourLoAlarm 4 } + +aprisaXERxADCChFourLoAlarmThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates the level at wLoch the receiver ADC Ch Four voltage too low + alarm will be set." + ::= { aprisaXERxADCChFourLoAlarm 5 } + +aprisaXERxADCChFourLoAlarmClearThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates the level at wLoch the receiver ADC Ch Four voltage too low + will be cleared." + ::= { aprisaXERxADCChFourLoAlarm 6 } + +aprisaXERxADCChFourLoAlarmsGroup OBJECT-GROUP + OBJECTS { aprisaXERxADCChFourLoAlarmName, + aprisaXERxADCChFourLoAlarmStatus, + aprisaXERxADCChFourLoAlarmSeverity, + aprisaXERxADCChFourLoAlarmEnabled, + aprisaXERxADCChFourLoAlarmThreshold, + aprisaXERxADCChFourLoAlarmClearThreshold + } + STATUS current + DESCRIPTION "The aprisaXERx receiver ADC Ch Four voltage too High alarm group." + ::= { aprisaXEGroups 284 } + + +aprisaXERxADCChFiveHiAlarm OBJECT IDENTIFIER ::= { aprisaXEReceiverAlarms 29 } + +aprisaXERxADCChFiveHiAlarmName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The name of the receiver ADC Ch Five voltage too high alarm." + ::= { aprisaXERxADCChFiveHiAlarm 1 } + +aprisaXERxADCChFiveHiAlarmStatus OBJECT-TYPE + SYNTAX FourRFAlarmStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The status of the receiver ADC Ch Five voltage too high alarm." + ::= { aprisaXERxADCChFiveHiAlarm 2 } + +aprisaXERxADCChFiveHiAlarmSeverity OBJECT-TYPE + SYNTAX FourRFAlarmSeverity + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The severity of the receiver ADC Ch Five voltage too high alarm." + ::= { aprisaXERxADCChFiveHiAlarm 3 } + +aprisaXERxADCChFiveHiAlarmEnabled OBJECT-TYPE + SYNTAX FourRFAlarmEnabled + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates whether the receiver ADC Ch Five voltage too high alarm is enabled." + ::= { aprisaXERxADCChFiveHiAlarm 4 } + +aprisaXERxADCChFiveHiAlarmThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates the level at which the receiver ADC Ch Five voltage too high + alarm will be set." + ::= { aprisaXERxADCChFiveHiAlarm 5 } + +aprisaXERxADCChFiveHiAlarmClearThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates the level at which the receiver ADC Ch Five voltage too high + will be cleared." + ::= { aprisaXERxADCChFiveHiAlarm 6 } + +aprisaXERxADCChFiveHiAlarmsGroup OBJECT-GROUP + OBJECTS { aprisaXERxADCChFiveHiAlarmName, + aprisaXERxADCChFiveHiAlarmStatus, + aprisaXERxADCChFiveHiAlarmSeverity, + aprisaXERxADCChFiveHiAlarmEnabled, + aprisaXERxADCChFiveHiAlarmThreshold, + aprisaXERxADCChFiveHiAlarmClearThreshold + } + STATUS current + DESCRIPTION "The aprisaXERx receiver ADC Ch Five voltage too high alarm group." + ::= { aprisaXEGroups 285 } + + +aprisaXERxADCChFiveLoAlarm OBJECT IDENTIFIER ::= { aprisaXEReceiverAlarms 30 } + +aprisaXERxADCChFiveLoAlarmName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The name of the receiver ADC Ch Five voltage too low alarm." + ::= { aprisaXERxADCChFiveLoAlarm 1 } + +aprisaXERxADCChFiveLoAlarmStatus OBJECT-TYPE + SYNTAX FourRFAlarmStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The status of the receiver ADC Ch Five voltage too low alarm." + ::= { aprisaXERxADCChFiveLoAlarm 2 } + +aprisaXERxADCChFiveLoAlarmSeverity OBJECT-TYPE + SYNTAX FourRFAlarmSeverity + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The severity of the receiver ADC Ch Five voltage too low alarm." + ::= { aprisaXERxADCChFiveLoAlarm 3 } + +aprisaXERxADCChFiveLoAlarmEnabled OBJECT-TYPE + SYNTAX FourRFAlarmEnabled + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates whether the receiver ADC Ch Five voltage too low alarm is enabled." + ::= { aprisaXERxADCChFiveLoAlarm 4 } + +aprisaXERxADCChFiveLoAlarmThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates the level at wLoch the receiver ADC Ch Five voltage too low + alarm will be set." + ::= { aprisaXERxADCChFiveLoAlarm 5 } + +aprisaXERxADCChFiveLoAlarmClearThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates the level at wLoch the receiver ADC Ch Five voltage too low + will be cleared." + ::= { aprisaXERxADCChFiveLoAlarm 6 } + +aprisaXERxADCChFiveLoAlarmsGroup OBJECT-GROUP + OBJECTS { aprisaXERxADCChFiveLoAlarmName, + aprisaXERxADCChFiveLoAlarmStatus, + aprisaXERxADCChFiveLoAlarmSeverity, + aprisaXERxADCChFiveLoAlarmEnabled, + aprisaXERxADCChFiveLoAlarmThreshold, + aprisaXERxADCChFiveLoAlarmClearThreshold + } + STATUS current + DESCRIPTION "The aprisaXERx receiver ADC Ch Five voltage too High alarm group." + ::= { aprisaXEGroups 286 } + + +aprisaXERxADCChSixHiAlarm OBJECT IDENTIFIER ::= { aprisaXEReceiverAlarms 31 } + +aprisaXERxADCChSixHiAlarmName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The name of the receiver ADC Ch Six voltage too high alarm." + ::= { aprisaXERxADCChSixHiAlarm 1 } + +aprisaXERxADCChSixHiAlarmStatus OBJECT-TYPE + SYNTAX FourRFAlarmStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The status of the receiver ADC Ch Six voltage too high alarm." + ::= { aprisaXERxADCChSixHiAlarm 2 } + +aprisaXERxADCChSixHiAlarmSeverity OBJECT-TYPE + SYNTAX FourRFAlarmSeverity + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The severity of the receiver ADC Ch Six voltage too high alarm." + ::= { aprisaXERxADCChSixHiAlarm 3 } + +aprisaXERxADCChSixHiAlarmEnabled OBJECT-TYPE + SYNTAX FourRFAlarmEnabled + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates whether the receiver ADC Ch Six voltage too high alarm is enabled." + ::= { aprisaXERxADCChSixHiAlarm 4 } + +aprisaXERxADCChSixHiAlarmThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates the level at which the receiver ADC Ch Six voltage too high + alarm will be set." + ::= { aprisaXERxADCChSixHiAlarm 5 } + +aprisaXERxADCChSixHiAlarmClearThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates the level at which the receiver ADC Ch Six voltage too high + will be cleared." + ::= { aprisaXERxADCChSixHiAlarm 6 } + +aprisaXERxADCChSixHiAlarmsGroup OBJECT-GROUP + OBJECTS { aprisaXERxADCChSixHiAlarmName, + aprisaXERxADCChSixHiAlarmStatus, + aprisaXERxADCChSixHiAlarmSeverity, + aprisaXERxADCChSixHiAlarmEnabled, + aprisaXERxADCChSixHiAlarmThreshold, + aprisaXERxADCChSixHiAlarmClearThreshold + } + STATUS current + DESCRIPTION "The aprisaXERx receiver ADC Ch Six voltage too high alarm group." + ::= { aprisaXEGroups 287 } + + +aprisaXERxADCChSixLoAlarm OBJECT IDENTIFIER ::= { aprisaXEReceiverAlarms 32 } + +aprisaXERxADCChSixLoAlarmName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The name of the receiver ADC Ch Six voltage too low alarm." + ::= { aprisaXERxADCChSixLoAlarm 1 } + +aprisaXERxADCChSixLoAlarmStatus OBJECT-TYPE + SYNTAX FourRFAlarmStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The status of the receiver ADC Ch Six voltage too low alarm." + ::= { aprisaXERxADCChSixLoAlarm 2 } + +aprisaXERxADCChSixLoAlarmSeverity OBJECT-TYPE + SYNTAX FourRFAlarmSeverity + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The severity of the receiver ADC Ch Six voltage too low alarm." + ::= { aprisaXERxADCChSixLoAlarm 3 } + +aprisaXERxADCChSixLoAlarmEnabled OBJECT-TYPE + SYNTAX FourRFAlarmEnabled + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates whether the receiver ADC Ch Six voltage too low alarm is enabled." + ::= { aprisaXERxADCChSixLoAlarm 4 } + +aprisaXERxADCChSixLoAlarmThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates the level at wLoch the receiver ADC Ch Six voltage too low + alarm will be set." + ::= { aprisaXERxADCChSixLoAlarm 5 } + +aprisaXERxADCChSixLoAlarmClearThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates the level at wLoch the receiver ADC Ch Six voltage too low + will be cleared." + ::= { aprisaXERxADCChSixLoAlarm 6 } + +aprisaXERxADCChSixLoAlarmsGroup OBJECT-GROUP + OBJECTS { aprisaXERxADCChSixLoAlarmName, + aprisaXERxADCChSixLoAlarmStatus, + aprisaXERxADCChSixLoAlarmSeverity, + aprisaXERxADCChSixLoAlarmEnabled, + aprisaXERxADCChSixLoAlarmThreshold, + aprisaXERxADCChSixLoAlarmClearThreshold + } + STATUS current + DESCRIPTION "The aprisaXERx receiver ADC Ch Six voltage too High alarm group." + ::= { aprisaXEGroups 288 } + + +aprisaXERxADCChSevenHiAlarm OBJECT IDENTIFIER ::= { aprisaXEReceiverAlarms 33 } + +aprisaXERxADCChSevenHiAlarmName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The name of the receiver ADC Ch Seven voltage too high alarm." + ::= { aprisaXERxADCChSevenHiAlarm 1 } + +aprisaXERxADCChSevenHiAlarmStatus OBJECT-TYPE + SYNTAX FourRFAlarmStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The status of the receiver ADC Ch Seven voltage too high alarm." + ::= { aprisaXERxADCChSevenHiAlarm 2 } + +aprisaXERxADCChSevenHiAlarmSeverity OBJECT-TYPE + SYNTAX FourRFAlarmSeverity + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The severity of the receiver ADC Ch Seven voltage too high alarm." + ::= { aprisaXERxADCChSevenHiAlarm 3 } + +aprisaXERxADCChSevenHiAlarmEnabled OBJECT-TYPE + SYNTAX FourRFAlarmEnabled + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates whether the receiver ADC Ch Seven voltage too high alarm is enabled." + ::= { aprisaXERxADCChSevenHiAlarm 4 } + +aprisaXERxADCChSevenHiAlarmThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates the level at which the receiver ADC Ch Seven voltage too high + alarm will be set." + ::= { aprisaXERxADCChSevenHiAlarm 5 } + +aprisaXERxADCChSevenHiAlarmClearThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates the level at which the receiver ADC Ch Seven voltage too high + will be cleared." + ::= { aprisaXERxADCChSevenHiAlarm 6 } + +aprisaXERxADCChSevenHiAlarmsGroup OBJECT-GROUP + OBJECTS { aprisaXERxADCChSevenHiAlarmName, + aprisaXERxADCChSevenHiAlarmStatus, + aprisaXERxADCChSevenHiAlarmSeverity, + aprisaXERxADCChSevenHiAlarmEnabled, + aprisaXERxADCChSevenHiAlarmThreshold, + aprisaXERxADCChSevenHiAlarmClearThreshold + } + STATUS current + DESCRIPTION "The aprisaXERx receiver ADC Ch Seven voltage too high alarm group." + ::= { aprisaXEGroups 289 } + + +aprisaXERxADCChSevenLoAlarm OBJECT IDENTIFIER ::= { aprisaXEReceiverAlarms 34 } + +aprisaXERxADCChSevenLoAlarmName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The name of the receiver ADC Ch Seven voltage too low alarm." + ::= { aprisaXERxADCChSevenLoAlarm 1 } + +aprisaXERxADCChSevenLoAlarmStatus OBJECT-TYPE + SYNTAX FourRFAlarmStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The status of the receiver ADC Ch Seven voltage too low alarm." + ::= { aprisaXERxADCChSevenLoAlarm 2 } + +aprisaXERxADCChSevenLoAlarmSeverity OBJECT-TYPE + SYNTAX FourRFAlarmSeverity + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The severity of the receiver ADC Ch Seven voltage too low alarm." + ::= { aprisaXERxADCChSevenLoAlarm 3 } + +aprisaXERxADCChSevenLoAlarmEnabled OBJECT-TYPE + SYNTAX FourRFAlarmEnabled + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates whether the receiver ADC Ch Seven voltage too low alarm is enabled." + ::= { aprisaXERxADCChSevenLoAlarm 4 } + +aprisaXERxADCChSevenLoAlarmThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates the level at wLoch the receiver ADC Ch Seven voltage too low + alarm will be set." + ::= { aprisaXERxADCChSevenLoAlarm 5 } + +aprisaXERxADCChSevenLoAlarmClearThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates the level at wLoch the receiver ADC Ch Seven voltage too low + will be cleared." + ::= { aprisaXERxADCChSevenLoAlarm 6 } + +aprisaXERxADCChSevenLoAlarmsGroup OBJECT-GROUP + OBJECTS { aprisaXERxADCChSevenLoAlarmName, + aprisaXERxADCChSevenLoAlarmStatus, + aprisaXERxADCChSevenLoAlarmSeverity, + aprisaXERxADCChSevenLoAlarmEnabled, + aprisaXERxADCChSevenLoAlarmThreshold, + aprisaXERxADCChSevenLoAlarmClearThreshold + } + STATUS current + DESCRIPTION "The aprisaXERx receiver ADC Ch Seven voltage too High alarm group." + ::= { aprisaXEGroups 290 } + + +aprisaXERxADCChEightHiAlarm OBJECT IDENTIFIER ::= { aprisaXEReceiverAlarms 35 } + +aprisaXERxADCChEightHiAlarmName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The name of the receiver ADC Ch Eight voltage too high alarm." + ::= { aprisaXERxADCChEightHiAlarm 1 } + +aprisaXERxADCChEightHiAlarmStatus OBJECT-TYPE + SYNTAX FourRFAlarmStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The status of the receiver ADC Ch Eight voltage too high alarm." + ::= { aprisaXERxADCChEightHiAlarm 2 } + +aprisaXERxADCChEightHiAlarmSeverity OBJECT-TYPE + SYNTAX FourRFAlarmSeverity + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The severity of the receiver ADC Ch Eight voltage too high alarm." + ::= { aprisaXERxADCChEightHiAlarm 3 } + +aprisaXERxADCChEightHiAlarmEnabled OBJECT-TYPE + SYNTAX FourRFAlarmEnabled + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates whether the receiver ADC Ch Eight voltage too high alarm is enabled." + ::= { aprisaXERxADCChEightHiAlarm 4 } + +aprisaXERxADCChEightHiAlarmThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates the level at which the receiver ADC Ch Eight voltage too high + alarm will be set." + ::= { aprisaXERxADCChEightHiAlarm 5 } + +aprisaXERxADCChEightHiAlarmClearThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates the level at which the receiver ADC Ch Eight voltage too high + will be cleared." + ::= { aprisaXERxADCChEightHiAlarm 6 } + +aprisaXERxADCChEightHiAlarmsGroup OBJECT-GROUP + OBJECTS { aprisaXERxADCChEightHiAlarmName, + aprisaXERxADCChEightHiAlarmStatus, + aprisaXERxADCChEightHiAlarmSeverity, + aprisaXERxADCChEightHiAlarmEnabled, + aprisaXERxADCChEightHiAlarmThreshold, + aprisaXERxADCChEightHiAlarmClearThreshold + } + STATUS current + DESCRIPTION "The aprisaXERx receiver ADC Ch Eight voltage too high alarm group." + ::= { aprisaXEGroups 291 } + + +aprisaXERxADCChEightLoAlarm OBJECT IDENTIFIER ::= { aprisaXEReceiverAlarms 36 } + +aprisaXERxADCChEightLoAlarmName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The name of the receiver ADC Ch Eight voltage too low alarm." + ::= { aprisaXERxADCChEightLoAlarm 1 } + +aprisaXERxADCChEightLoAlarmStatus OBJECT-TYPE + SYNTAX FourRFAlarmStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The status of the receiver ADC Ch Eight voltage too low alarm." + ::= { aprisaXERxADCChEightLoAlarm 2 } + +aprisaXERxADCChEightLoAlarmSeverity OBJECT-TYPE + SYNTAX FourRFAlarmSeverity + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The severity of the receiver ADC Ch Eight voltage too low alarm." + ::= { aprisaXERxADCChEightLoAlarm 3 } + +aprisaXERxADCChEightLoAlarmEnabled OBJECT-TYPE + SYNTAX FourRFAlarmEnabled + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates whether the receiver ADC Ch Eight voltage too low alarm is enabled." + ::= { aprisaXERxADCChEightLoAlarm 4 } + +aprisaXERxADCChEightLoAlarmThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates the level at wLoch the receiver ADC Ch Eight voltage too low + alarm will be set." + ::= { aprisaXERxADCChEightLoAlarm 5 } + +aprisaXERxADCChEightLoAlarmClearThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates the level at wLoch the receiver ADC Ch Eight voltage too low + will be cleared." + ::= { aprisaXERxADCChEightLoAlarm 6 } + +aprisaXERxADCChEightLoAlarmsGroup OBJECT-GROUP + OBJECTS { aprisaXERxADCChEightLoAlarmName, + aprisaXERxADCChEightLoAlarmStatus, + aprisaXERxADCChEightLoAlarmSeverity, + aprisaXERxADCChEightLoAlarmEnabled, + aprisaXERxADCChEightLoAlarmThreshold, + aprisaXERxADCChEightLoAlarmClearThreshold + } + STATUS current + DESCRIPTION "The aprisaXERx receiver ADC Ch Eight voltage too High alarm group." + ::= { aprisaXEGroups 292 } + + +aprisaXERxADCChNineHiAlarm OBJECT IDENTIFIER ::= { aprisaXEReceiverAlarms 37 } + +aprisaXERxADCChNineHiAlarmName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The name of the receiver ADC Ch Nine voltage too high alarm." + ::= { aprisaXERxADCChNineHiAlarm 1 } + +aprisaXERxADCChNineHiAlarmStatus OBJECT-TYPE + SYNTAX FourRFAlarmStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The status of the receiver ADC Ch Nine voltage too high alarm." + ::= { aprisaXERxADCChNineHiAlarm 2 } + +aprisaXERxADCChNineHiAlarmSeverity OBJECT-TYPE + SYNTAX FourRFAlarmSeverity + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The severity of the receiver ADC Ch Nine voltage too high alarm." + ::= { aprisaXERxADCChNineHiAlarm 3 } + +aprisaXERxADCChNineHiAlarmEnabled OBJECT-TYPE + SYNTAX FourRFAlarmEnabled + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates whether the receiver ADC Ch Nine voltage too high alarm is enabled." + ::= { aprisaXERxADCChNineHiAlarm 4 } + +aprisaXERxADCChNineHiAlarmThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates the level at which the receiver ADC Ch Nine voltage too high + alarm will be set." + ::= { aprisaXERxADCChNineHiAlarm 5 } + +aprisaXERxADCChNineHiAlarmClearThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates the level at which the receiver ADC Ch Nine voltage too high + will be cleared." + ::= { aprisaXERxADCChNineHiAlarm 6 } + +aprisaXERxADCChNineHiAlarmsGroup OBJECT-GROUP + OBJECTS { aprisaXERxADCChNineHiAlarmName, + aprisaXERxADCChNineHiAlarmStatus, + aprisaXERxADCChNineHiAlarmSeverity, + aprisaXERxADCChNineHiAlarmEnabled, + aprisaXERxADCChNineHiAlarmThreshold, + aprisaXERxADCChNineHiAlarmClearThreshold + } + STATUS current + DESCRIPTION "The aprisaXERx receiver ADC Ch Nine voltage too high alarm group." + ::= { aprisaXEGroups 293 } + + +aprisaXERxADCChNineLoAlarm OBJECT IDENTIFIER ::= { aprisaXEReceiverAlarms 38 } + +aprisaXERxADCChNineLoAlarmName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The name of the receiver ADC Ch Nine voltage too low alarm." + ::= { aprisaXERxADCChNineLoAlarm 1 } + +aprisaXERxADCChNineLoAlarmStatus OBJECT-TYPE + SYNTAX FourRFAlarmStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The status of the receiver ADC Ch Nine voltage too low alarm." + ::= { aprisaXERxADCChNineLoAlarm 2 } + +aprisaXERxADCChNineLoAlarmSeverity OBJECT-TYPE + SYNTAX FourRFAlarmSeverity + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The severity of the receiver ADC Ch Nine voltage too low alarm." + ::= { aprisaXERxADCChNineLoAlarm 3 } + +aprisaXERxADCChNineLoAlarmEnabled OBJECT-TYPE + SYNTAX FourRFAlarmEnabled + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates whether the receiver ADC Ch Nine voltage too low alarm is enabled." + ::= { aprisaXERxADCChNineLoAlarm 4 } + +aprisaXERxADCChNineLoAlarmThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates the level at wLoch the receiver ADC Ch Nine voltage too low + alarm will be set." + ::= { aprisaXERxADCChNineLoAlarm 5 } + +aprisaXERxADCChNineLoAlarmClearThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates the level at wLoch the receiver ADC Ch Nine voltage too low + will be cleared." + ::= { aprisaXERxADCChNineLoAlarm 6 } + +aprisaXERxADCChNineLoAlarmsGroup OBJECT-GROUP + OBJECTS { aprisaXERxADCChNineLoAlarmName, + aprisaXERxADCChNineLoAlarmStatus, + aprisaXERxADCChNineLoAlarmSeverity, + aprisaXERxADCChNineLoAlarmEnabled, + aprisaXERxADCChNineLoAlarmThreshold, + aprisaXERxADCChNineLoAlarmClearThreshold + } + STATUS current + DESCRIPTION "The aprisaXERx receiver ADC Ch Nine voltage too High alarm group." + ::= { aprisaXEGroups 294 } + + +aprisaXERxADCChTenHiAlarm OBJECT IDENTIFIER ::= { aprisaXEReceiverAlarms 39 } + +aprisaXERxADCChTenHiAlarmName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The name of the receiver ADC Ch Ten voltage too high alarm." + ::= { aprisaXERxADCChTenHiAlarm 1 } + +aprisaXERxADCChTenHiAlarmStatus OBJECT-TYPE + SYNTAX FourRFAlarmStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The status of the receiver ADC Ch Ten voltage too high alarm." + ::= { aprisaXERxADCChTenHiAlarm 2 } + +aprisaXERxADCChTenHiAlarmSeverity OBJECT-TYPE + SYNTAX FourRFAlarmSeverity + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The severity of the receiver ADC Ch Ten voltage too high alarm." + ::= { aprisaXERxADCChTenHiAlarm 3 } + +aprisaXERxADCChTenHiAlarmEnabled OBJECT-TYPE + SYNTAX FourRFAlarmEnabled + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates whether the receiver ADC Ch Ten voltage too high alarm is enabled." + ::= { aprisaXERxADCChTenHiAlarm 4 } + +aprisaXERxADCChTenHiAlarmThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates the level at which the receiver ADC Ch Ten voltage too high + alarm will be set." + ::= { aprisaXERxADCChTenHiAlarm 5 } + +aprisaXERxADCChTenHiAlarmClearThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates the level at which the receiver ADC Ch Ten voltage too high + will be cleared." + ::= { aprisaXERxADCChTenHiAlarm 6 } + +aprisaXERxADCChTenHiAlarmsGroup OBJECT-GROUP + OBJECTS { aprisaXERxADCChTenHiAlarmName, + aprisaXERxADCChTenHiAlarmStatus, + aprisaXERxADCChTenHiAlarmSeverity, + aprisaXERxADCChTenHiAlarmEnabled, + aprisaXERxADCChTenHiAlarmThreshold, + aprisaXERxADCChTenHiAlarmClearThreshold + } + STATUS current + DESCRIPTION "The aprisaXERx receiver ADC Ch Ten voltage too high alarm group." + ::= { aprisaXEGroups 295 } + + +aprisaXERxADCChTenLoAlarm OBJECT IDENTIFIER ::= { aprisaXEReceiverAlarms 40 } + +aprisaXERxADCChTenLoAlarmName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The name of the receiver ADC Ch Ten voltage too low alarm." + ::= { aprisaXERxADCChTenLoAlarm 1 } + +aprisaXERxADCChTenLoAlarmStatus OBJECT-TYPE + SYNTAX FourRFAlarmStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The status of the receiver ADC Ch Ten voltage too low alarm." + ::= { aprisaXERxADCChTenLoAlarm 2 } + +aprisaXERxADCChTenLoAlarmSeverity OBJECT-TYPE + SYNTAX FourRFAlarmSeverity + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The severity of the receiver ADC Ch Ten voltage too low alarm." + ::= { aprisaXERxADCChTenLoAlarm 3 } + +aprisaXERxADCChTenLoAlarmEnabled OBJECT-TYPE + SYNTAX FourRFAlarmEnabled + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates whether the receiver ADC Ch Ten voltage too low alarm is enabled." + ::= { aprisaXERxADCChTenLoAlarm 4 } + +aprisaXERxADCChTenLoAlarmThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates the level at wLoch the receiver ADC Ch Ten voltage too low + alarm will be set." + ::= { aprisaXERxADCChTenLoAlarm 5 } + +aprisaXERxADCChTenLoAlarmClearThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates the level at wLoch the receiver ADC Ch Ten voltage too low + will be cleared." + ::= { aprisaXERxADCChTenLoAlarm 6 } + +aprisaXERxADCChTenLoAlarmsGroup OBJECT-GROUP + OBJECTS { aprisaXERxADCChTenLoAlarmName, + aprisaXERxADCChTenLoAlarmStatus, + aprisaXERxADCChTenLoAlarmSeverity, + aprisaXERxADCChTenLoAlarmEnabled, + aprisaXERxADCChTenLoAlarmThreshold, + aprisaXERxADCChTenLoAlarmClearThreshold + } + STATUS current + DESCRIPTION "The aprisaXERx receiver ADC Ch Ten voltage too High alarm group." + ::= { aprisaXEGroups 296 } + +-- *************************************************************************** +-- End of the Generic Receiver alarms +-- *************************************************************************** + + + +-- *************************************************************************** +-- Modem alarms +-- *************************************************************************** + +aprisaXEModemAlarms OBJECT IDENTIFIER ::= { aprisaXELinkAlarms 10 } + +aprisaXEModemSyncAlarm OBJECT IDENTIFIER ::= { aprisaXEModemAlarms 1 } + +aprisaXEModemSyncAlarmStatus OBJECT-TYPE + SYNTAX FourRFAlarmStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The status of the loss of modem sync alarm." + ::= { aprisaXEModemSyncAlarm 1 } + +aprisaXEModemSyncAlarmSeverity OBJECT-TYPE + SYNTAX FourRFAlarmSeverity + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The severity of the loss of modem sync alarm." + ::= { aprisaXEModemSyncAlarm 2 } + +aprisaXEModemSyncAlarmEnabled OBJECT-TYPE + SYNTAX FourRFAlarmEnabled + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates whether the loss of modem sync alarm is enabled." + ::= { aprisaXEModemSyncAlarm 3 } + +-- *************************************************************************** +-- End of Modem alarms +-- *************************************************************************** + + + +-- *************************************************************************** +-- Quad E1 Alarms +-- *************************************************************************** + +aprisaXEQuadJetBoardTable OBJECT-TYPE + SYNTAX SEQUENCE OF AprisaXEQuadJetBoardEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "Table of Quad E1 card specific configuration details." + ::= { aprisaXEObjects 87 } + +aprisaXEQuadJetBoardEntry OBJECT-TYPE + SYNTAX AprisaXEQuadJetBoardEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "Quad E1 configuration details." + INDEX { aprisaXEQuadJetBoardTableIndex } + ::= { aprisaXEQuadJetBoardTable 1 } + +AprisaXEQuadJetBoardEntry ::= SEQUENCE { + aprisaXEQuadJetBoardTableIndex INTEGER + } + +aprisaXEQuadJetBoardTableIndex OBJECT-TYPE + SYNTAX AprisaXESlotNumber + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Quad E1 board indexed by slot." + ::= { aprisaXEQuadJetBoardEntry 1 } + +aprisaXEQuadJetPortTable OBJECT-TYPE + SYNTAX SEQUENCE OF AprisaXEQuadJetPortEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "Table based on slot and port of QuadJet cards alarms." + ::= { aprisaXEObjects 88 } + +aprisaXEQuadJetPortEntry OBJECT-TYPE + SYNTAX AprisaXEQuadJetPortEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "Quad E1 port alarms." + INDEX { aprisaXEQuadJetPortTableSlot, + aprisaXEQuadJetPortTablePort + } + ::= { aprisaXEQuadJetPortTable 1 } + +AprisaXEQuadJetPortEntry ::= SEQUENCE { + aprisaXEQuadJetPortTableSlot INTEGER, + aprisaXEQuadJetPortTablePort INTEGER, + aprisaXEQuadJetLOFAlarmStatus INTEGER, + aprisaXEQuadJetLOFAlarmSeverity INTEGER, + aprisaXEQuadJetLOFAlarmEnabled INTEGER, + aprisaXEQuadJetAISAlarmStatus INTEGER, + aprisaXEQuadJetAISAlarmSeverity INTEGER, + aprisaXEQuadJetAISAlarmEnabled INTEGER, + aprisaXEQuadJetRAIAlarmStatus INTEGER, + aprisaXEQuadJetRAIAlarmSeverity INTEGER, + aprisaXEQuadJetRAIAlarmEnabled INTEGER, + aprisaXEQuadJetRMAIAlarmStatus INTEGER, + aprisaXEQuadJetRMAIAlarmSeverity INTEGER, + aprisaXEQuadJetRMAIAlarmEnabled INTEGER, + aprisaXEQuadJetTS16AISAlarmStatus INTEGER, + aprisaXEQuadJetTS16AISAlarmSeverity INTEGER, + aprisaXEQuadJetTS16AISAlarmEnabled INTEGER, + aprisaXEQuadJetTS16LOSAlarmStatus INTEGER, + aprisaXEQuadJetTS16LOSAlarmSeverity INTEGER, + aprisaXEQuadJetTS16LOSAlarmEnabled INTEGER, + aprisaXEQuadJetLOSAlarmStatus INTEGER, + aprisaXEQuadJetLOSAlarmSeverity INTEGER, + aprisaXEQuadJetLOSAlarmEnabled INTEGER, + aprisaXEQuadJetCRC4AlarmStatus INTEGER, + aprisaXEQuadJetCRC4AlarmSeverity INTEGER, + aprisaXEQuadJetCRC4AlarmEnabled INTEGER, + aprisaXEQuadJetCRC4AlarmThreshold Integer32, + aprisaXEQuadJetCRC4AlarmClearThreshold Integer32 + } + +aprisaXEQuadJetPortTableSlot OBJECT-TYPE + SYNTAX AprisaXESlotNumber + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Port table index based on slot number." + ::= { aprisaXEQuadJetPortEntry 1 } + +aprisaXEQuadJetPortTablePort OBJECT-TYPE + SYNTAX AprisaXEPortNumber + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Port table index based on port number." + ::= { aprisaXEQuadJetPortEntry 2 } + +aprisaXEQuadJetLOFAlarmStatus OBJECT-TYPE + SYNTAX FourRFAlarmStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Red alarm status." + ::= { aprisaXEQuadJetPortEntry 3 } + +aprisaXEQuadJetLOFAlarmSeverity OBJECT-TYPE + SYNTAX FourRFAlarmSeverity + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Red alarm severity." + ::= { aprisaXEQuadJetPortEntry 4 } + +aprisaXEQuadJetLOFAlarmEnabled OBJECT-TYPE + SYNTAX FourRFAlarmEnabled + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Red alarm enabled or disabled." + ::= { aprisaXEQuadJetPortEntry 5 } + +aprisaXEQuadJetAISAlarmStatus OBJECT-TYPE + SYNTAX FourRFAlarmStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION "AIS alarm status." + ::= { aprisaXEQuadJetPortEntry 6 } + +aprisaXEQuadJetAISAlarmSeverity OBJECT-TYPE + SYNTAX FourRFAlarmSeverity + MAX-ACCESS read-only + STATUS current + DESCRIPTION "AIS alarm severity." + ::= { aprisaXEQuadJetPortEntry 7 } + +aprisaXEQuadJetAISAlarmEnabled OBJECT-TYPE + SYNTAX FourRFAlarmEnabled + MAX-ACCESS read-only + STATUS current + DESCRIPTION "AIS alarm enabled or disabled." + ::= { aprisaXEQuadJetPortEntry 8 } + +aprisaXEQuadJetRAIAlarmStatus OBJECT-TYPE + SYNTAX FourRFAlarmStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION "RAI alarm status." + ::= { aprisaXEQuadJetPortEntry 9 } + +aprisaXEQuadJetRAIAlarmSeverity OBJECT-TYPE + SYNTAX FourRFAlarmSeverity + MAX-ACCESS read-only + STATUS current + DESCRIPTION "RAI alarm severity." + ::= { aprisaXEQuadJetPortEntry 10 } + +aprisaXEQuadJetRAIAlarmEnabled OBJECT-TYPE + SYNTAX FourRFAlarmEnabled + MAX-ACCESS read-only + STATUS current + DESCRIPTION "RAI alarm enabled or disabled." + ::= { aprisaXEQuadJetPortEntry 11 } + +aprisaXEQuadJetRMAIAlarmStatus OBJECT-TYPE + SYNTAX FourRFAlarmStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION "RMAI alarm status." + ::= { aprisaXEQuadJetPortEntry 12 } + +aprisaXEQuadJetRMAIAlarmSeverity OBJECT-TYPE + SYNTAX FourRFAlarmSeverity + MAX-ACCESS read-only + STATUS current + DESCRIPTION "RMAI alarm severity." + ::= { aprisaXEQuadJetPortEntry 13 } + +aprisaXEQuadJetRMAIAlarmEnabled OBJECT-TYPE + SYNTAX FourRFAlarmEnabled + MAX-ACCESS read-only + STATUS current + DESCRIPTION "RMAI alarm enabled or disabled." + ::= { aprisaXEQuadJetPortEntry 14 } + +aprisaXEQuadJetTS16AISAlarmStatus OBJECT-TYPE + SYNTAX FourRFAlarmStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION "TS16 AIS alarm status." + ::= { aprisaXEQuadJetPortEntry 15 } + +aprisaXEQuadJetTS16AISAlarmSeverity OBJECT-TYPE + SYNTAX FourRFAlarmSeverity + MAX-ACCESS read-only + STATUS current + DESCRIPTION "TS16 AIS alarm severity." + ::= { aprisaXEQuadJetPortEntry 16 } + +aprisaXEQuadJetTS16AISAlarmEnabled OBJECT-TYPE + SYNTAX FourRFAlarmEnabled + MAX-ACCESS read-only + STATUS current + DESCRIPTION "TS16 AIS alarm enabled or disabled." + ::= { aprisaXEQuadJetPortEntry 17 } + +aprisaXEQuadJetTS16LOSAlarmStatus OBJECT-TYPE + SYNTAX FourRFAlarmStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION "TS16 LOS alarm status." + ::= { aprisaXEQuadJetPortEntry 18 } + +aprisaXEQuadJetTS16LOSAlarmSeverity OBJECT-TYPE + SYNTAX FourRFAlarmSeverity + MAX-ACCESS read-only + STATUS current + DESCRIPTION "TS16 LOS alarm severity." + ::= { aprisaXEQuadJetPortEntry 19 } + +aprisaXEQuadJetTS16LOSAlarmEnabled OBJECT-TYPE + SYNTAX FourRFAlarmEnabled + MAX-ACCESS read-only + STATUS current + DESCRIPTION "TS16 LOS alarm enabled or disabled." + ::= { aprisaXEQuadJetPortEntry 20 } + +aprisaXEQuadJetLOSAlarmStatus OBJECT-TYPE + SYNTAX FourRFAlarmStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION "LOS alarm status." + ::= { aprisaXEQuadJetPortEntry 21 } + +aprisaXEQuadJetLOSAlarmSeverity OBJECT-TYPE + SYNTAX FourRFAlarmSeverity + MAX-ACCESS read-only + STATUS current + DESCRIPTION "LOS alarm severity." + ::= { aprisaXEQuadJetPortEntry 22 } + +aprisaXEQuadJetLOSAlarmEnabled OBJECT-TYPE + SYNTAX FourRFAlarmEnabled + MAX-ACCESS read-only + STATUS current + DESCRIPTION "LOS alarm enabled or disabled." + ::= { aprisaXEQuadJetPortEntry 23 } + +aprisaXEQuadJetCRC4AlarmStatus OBJECT-TYPE + SYNTAX FourRFAlarmStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION "CRC4 alarm status." + ::= { aprisaXEQuadJetPortEntry 24 } + +aprisaXEQuadJetCRC4AlarmSeverity OBJECT-TYPE + SYNTAX FourRFAlarmSeverity + MAX-ACCESS read-only + STATUS current + DESCRIPTION "CRC4 alarm severity." + ::= { aprisaXEQuadJetPortEntry 25 } + +aprisaXEQuadJetCRC4AlarmEnabled OBJECT-TYPE + SYNTAX FourRFAlarmEnabled + MAX-ACCESS read-only + STATUS current + DESCRIPTION "CRC4 alarm enabled or disabled." + ::= { aprisaXEQuadJetPortEntry 26 } + +aprisaXEQuadJetCRC4AlarmThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "CRC4 Threshold value for counter to alarm at." + ::= { aprisaXEQuadJetPortEntry 27 } + +aprisaXEQuadJetCRC4AlarmClearThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "CRC4 Threshold at which alarm clears." + ::= { aprisaXEQuadJetPortEntry 28 } + + +aprisaXEQuadJetIFConfigTable OBJECT-TYPE + SYNTAX SEQUENCE OF AprisaXEQuadJetIFConfigEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "Switch data table which describes the + allocation of user data on to the TDM busses." + ::= { aprisaXEObjects 90 } + +aprisaXEQuadJetIFConfigEntry OBJECT-TYPE + SYNTAX AprisaXEQuadJetIFConfigEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "Quad JET config data." + INDEX { aprisaXEQuadJetIFConfigSlotIndex, + aprisaXEQuadJetIFConfigPortIndex + } + ::= { aprisaXEQuadJetIFConfigTable 1 } + +AprisaXEQuadJetIFConfigEntry ::= SEQUENCE { + aprisaXEQuadJetIFConfigSlotIndex INTEGER, + aprisaXEQuadJetIFConfigPortIndex INTEGER, + aprisaXEQuadJetTrafficType INTEGER, + aprisaXEQuadJetLoopback INTEGER, + aprisaXEQuadJetLineEncoding INTEGER, + aprisaXEQuadJetPcmMode INTEGER, + aprisaXEQuadJetClockSource INTEGER, + aprisaXEQuadJetLineRadioLoopback INTEGER, + aprisaXEQuadJetTxWaveFormShaper INTEGER, + aprisaXEQuadJetMultiframeEnable INTEGER + } + +aprisaXEQuadJetIFConfigSlotIndex OBJECT-TYPE + SYNTAX AprisaXESlotNumber + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Index to the port table based on port number." + ::= { aprisaXEQuadJetIFConfigEntry 1 } + +aprisaXEQuadJetIFConfigPortIndex OBJECT-TYPE + SYNTAX AprisaXEPortNumber + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Index to the port table based on port number." + ::= { aprisaXEQuadJetIFConfigEntry 2 } + +aprisaXEQuadJetTrafficType OBJECT-TYPE + SYNTAX AprisaXEQuadJetTrafficType + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Controls the traffic type on a Quad JET port." + ::= { aprisaXEQuadJetIFConfigEntry 3 } + +aprisaXEQuadJetLoopback OBJECT-TYPE + SYNTAX FourRFLoopback + MAX-ACCESS read-write + STATUS obsolete + DESCRIPTION "Controls the traffic loopback on a Quad JET port." + ::= { aprisaXEQuadJetIFConfigEntry 4 } + +aprisaXEQuadJetLineEncoding OBJECT-TYPE + SYNTAX AprisaXEQuadJetLineEncoding + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Controls the line encoding, the default is + HDB3 for E1, B8ZS for T1." + ::= { aprisaXEQuadJetIFConfigEntry 5 } + +aprisaXEQuadJetPcmMode OBJECT-TYPE + SYNTAX AprisaXEPcmMode + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Controls the PCM mode, PCM31 or PCM30C." + ::= { aprisaXEQuadJetIFConfigEntry 6 } + +aprisaXEQuadJetClockSource OBJECT-TYPE + SYNTAX FourRFNetworkClockSelect + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Controls whether the port drives the clock soure or not." + ::= { aprisaXEQuadJetIFConfigEntry 7 } + +aprisaXEQuadJetLineRadioLoopback OBJECT-TYPE + SYNTAX AprisaXEQuadJetLoopbacks + MAX-ACCESS read-write + STATUS current + DESCRIPTION "This indicates the E1 loopback setting on a port; + OFF, Line or Radio Facing." + ::= { aprisaXEQuadJetIFConfigEntry 8 } + +aprisaXEQuadJetTxWaveFormShaper OBJECT-TYPE + SYNTAX AprisaXEQuadJetWaveFormShapers + MAX-ACCESS read-write + STATUS current + DESCRIPTION "This indicates the T1 Tx Waveform Shaper for a port; + 0~133 ft, 133~266 ft, 266~399 ft, 399~533 ft, 533~655 ft." + ::= { aprisaXEQuadJetIFConfigEntry 9 } + +aprisaXEQuadJetMultiframeEnable OBJECT-TYPE + SYNTAX AprisaXEQuadJetMultiframeEnable + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Indicates whether support is enabled for transport of T1 SF + and ESF multiframe sync for a port." + ::= { aprisaXEQuadJetIFConfigEntry 10 } + + +-- E1 Cross connection table, this maps cross-connection identifiers to +-- the matching E1 slot and port. + +aprisaXEQuadJetIFConnectionTable OBJECT-TYPE + SYNTAX SEQUENCE OF AprisaXEQuadJetIFConnectionTableEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "Interface connection table which holds all the cross + connect information for the E1 card." + ::= { aprisaXEObjects 91 } + +aprisaXEQuadJetIFConnectionTableEntry OBJECT-TYPE + SYNTAX AprisaXEQuadJetIFConnectionTableEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "Quad JET cross connection data." + INDEX { aprisaXEQuadJetIFConnectionID, + aprisaXEQuadJetIFConnectionAggregateID + } + ::= { aprisaXEQuadJetIFConnectionTable 1 } + +AprisaXEQuadJetIFConnectionTableEntry ::= SEQUENCE { + aprisaXEQuadJetIFConnectionID INTEGER, + aprisaXEQuadJetIFConnectionAggregateID INTEGER, + aprisaXEQuadJetIFConnectionSlot INTEGER, + aprisaXEQuadJetIFConnectionE1Port INTEGER, + aprisaXEQuadJetIFConnectionType INTEGER + } + +aprisaXEQuadJetIFConnectionID OBJECT-TYPE + SYNTAX AprisaXEConnectionID + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Backplane Connection ID." + ::= { aprisaXEQuadJetIFConnectionTableEntry 1 } + +aprisaXEQuadJetIFConnectionAggregateID OBJECT-TYPE + SYNTAX AprisaXEConnectionID + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Aggregate ID, 0 if an unframed connection." + ::= { aprisaXEQuadJetIFConnectionTableEntry 2 } + +aprisaXEQuadJetIFConnectionSlot OBJECT-TYPE + SYNTAX AprisaXESlotNumber + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Slot number that this card is in." + ::= { aprisaXEQuadJetIFConnectionTableEntry 3 } + +aprisaXEQuadJetIFConnectionE1Port OBJECT-TYPE + SYNTAX AprisaXEPortNumber + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Port number associated with this connection." + ::= { aprisaXEQuadJetIFConnectionTableEntry 4 } + +aprisaXEQuadJetIFConnectionType OBJECT-TYPE + SYNTAX AprisaXEQuadJetConnectionType + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates whether the connection is for data or + CAS signalling." + ::= { aprisaXEQuadJetIFConnectionTableEntry 5 } + + +aprisaXEQuadJetIFConnectionControl OBJECT IDENTIFIER ::= { aprisaXEObjects 93 } + +aprisaXEQuadJetIFControlConnectionID OBJECT-TYPE + SYNTAX AprisaXEConnectionID + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Backplane Connection ID." + ::= { aprisaXEQuadJetIFConnectionControl 1 } + +aprisaXEQuadJetIFControlAggregateID OBJECT-TYPE + SYNTAX AprisaXEConnectionID + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Aggregate Connection ID." + ::= { aprisaXEQuadJetIFConnectionControl 2 } + +aprisaXEQuadJetIFConnectionControlSlot OBJECT-TYPE + SYNTAX AprisaXESlotNumber + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Slot number that this card is in." + ::= { aprisaXEQuadJetIFConnectionControl 3 } + +aprisaXEQuadJetIFConnectionControlE1Port OBJECT-TYPE + SYNTAX AprisaXEPortNumber + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Port number associated with this connection." + ::= { aprisaXEQuadJetIFConnectionControl 4 } + +aprisaXEQuadJetIFConnectionControlType OBJECT-TYPE + SYNTAX AprisaXEQuadJetConnectionType + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Indicates whether the connection is for data or + CAS signalling." + ::= { aprisaXEQuadJetIFConnectionControl 5 } + +aprisaXEQuadJetIFConnectionControlCommand OBJECT-TYPE + SYNTAX INTEGER { noCommand (0), + addCommand (1), + deleteCommand (2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Command to send to act upon the rows in the QuedJet Interface + Connection table." + ::= { aprisaXEQuadJetIFConnectionControl 6 } + +-- *************************************************************************** +-- End Quad JET +-- *************************************************************************** + + + +-- *************************************************************************** +-- Ethernet +-- *************************************************************************** + +aprisaXEEthernetConfiguration OBJECT IDENTIFIER ::= { aprisaXEObjects 95 } + +aprisaXEEthernetBandwidth OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION "This controls the bandwidth allocated to + ethernet in kbps, the minimum block is + 8kbps, values will be rounded up to the + nearest 8kbps." + ::= { aprisaXEEthernetConfiguration 1 } + +aprisaXEEthernetManagementBandwidth OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION "This controls the bandwidth available to + management traffic, a minimum of 8kbps is + required. Values will be rounded up to + the nearest 8kbps." + ::= { aprisaXEEthernetConfiguration 2 } + +aprisaXEEthernetCustomerConnectionID OBJECT-TYPE + SYNTAX AprisaXEConnectionID + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Backplane connection ID for Customer bandwidth." + ::= { aprisaXEEthernetConfiguration 3 } + +aprisaXEEthernetPBCConnectionID OBJECT-TYPE + SYNTAX AprisaXEConnectionID + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Backplane connection ID for Private Back Channel + management bandwidth." + ::= { aprisaXEEthernetConfiguration 4 } + + +-- For now a simple table for basic control/status of the hub ports. Later +-- we probably want to implement the EtherLike-MIB. + +aprisaXEEthernetPortTable OBJECT-TYPE + SYNTAX SEQUENCE OF AprisaXEEthernetPortEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "Table used to control and monitor basic ethernet + features on the 4-port hub." + ::= { aprisaXEObjects 96 } + +aprisaXEEthernetPortEntry OBJECT-TYPE + SYNTAX AprisaXEEthernetPortEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "Ethernet port status and configuration." + INDEX { aprisaXEEthernetPortIndex } + ::= { aprisaXEEthernetPortTable 1 } + +AprisaXEEthernetPortEntry ::= SEQUENCE { + aprisaXEEthernetPortIndex INTEGER, + aprisaXEEthernetAutonegotiationStatus INTEGER, + aprisaXEEthernetRemoteFaultStatus INTEGER, + aprisaXEEthernetLinkStatus INTEGER, + aprisaXEEthernetJabberStatus INTEGER, + aprisaXEEthernetSpeed INTEGER, + aprisaXEEthernetDuplexMode INTEGER + } + +aprisaXEEthernetPortIndex OBJECT-TYPE + SYNTAX INTEGER ( 1..4 ) + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The port index, there are four ports on the hub." + ::= { aprisaXEEthernetPortEntry 1 } + +aprisaXEEthernetAutonegotiationStatus OBJECT-TYPE + SYNTAX INTEGER { autoNegotiationNotComplete (0), + autoNegotiationComplete (1) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The status of the port auto-negotiation." + ::= { aprisaXEEthernetPortEntry 2 } + +aprisaXEEthernetRemoteFaultStatus OBJECT-TYPE + SYNTAX INTEGER { remoteFaultNotDetected (0), + remoteFaultDetected (1) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The status of the port remote fault detection." + ::= { aprisaXEEthernetPortEntry 3 } + +aprisaXEEthernetLinkStatus OBJECT-TYPE + SYNTAX INTEGER { down (0), + up (1) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The status of the port link." + ::= { aprisaXEEthernetPortEntry 4 } + +aprisaXEEthernetJabberStatus OBJECT-TYPE + SYNTAX INTEGER { jabberNotDetected (0), + jabberDetected (1) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Has jabber been detected on the port?." + ::= { aprisaXEEthernetPortEntry 5 } + +aprisaXEEthernetSpeed OBJECT-TYPE + SYNTAX INTEGER { mbps10 (0), + mbps100 (1) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The current port speed, 10 or 100 Mbps." + ::= { aprisaXEEthernetPortEntry 6 } + +aprisaXEEthernetDuplexMode OBJECT-TYPE + SYNTAX INTEGER { halfDuplex (0), + fullDuplex (1) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The current port duplex mode." + ::= { aprisaXEEthernetPortEntry 7 } + +-- *************************************************************************** +-- End Ethernet +-- *************************************************************************** + + + +-- *************************************************************************** +-- Interface Status +-- *************************************************************************** +-- +-- A table which maintains the status of the interface cards, the amount of +-- bandwidth allocated per port and the overall alarm status. +-- + +aprisaXEInterfaceTable OBJECT-TYPE + SYNTAX SEQUENCE OF AprisaXEInterfaceTableEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "Table used to monitor the current interface status." + ::= { aprisaXEObjects 100 } + +aprisaXEInterfaceTableEntry OBJECT-TYPE + SYNTAX AprisaXEInterfaceTableEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "Interface bandwidth and status." + INDEX { aprisaXEInterfaceIndex } + ::= { aprisaXEInterfaceTable 1 } + +AprisaXEInterfaceTableEntry ::= SEQUENCE { + aprisaXEInterfaceIndex INTEGER, + aprisaXEInterfaceType INTEGER, + aprisaXEInterfaceAlarmStatus INTEGER, + aprisaXEInterfacePort1Bandwidth Unsigned32, + aprisaXEInterfacePort2Bandwidth Unsigned32, + aprisaXEInterfacePort3Bandwidth Unsigned32, + aprisaXEInterfacePort4Bandwidth Unsigned32 + } + +aprisaXEInterfaceIndex OBJECT-TYPE + SYNTAX AprisaXESlotNumber + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The slot containing the interface card, slots 0 to + 8 (AUX or A-H) inclusive may contain interface cards." + ::= { aprisaXEInterfaceTableEntry 1 } + +aprisaXEInterfaceType OBJECT-TYPE + SYNTAX AprisaXECardType + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates the type of interface card." + ::= { aprisaXEInterfaceTableEntry 2 } + +aprisaXEInterfaceAlarmStatus OBJECT-TYPE + SYNTAX FourRFAlarmStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates the current alarm status for the interface." + ::= { aprisaXEInterfaceTableEntry 3 } + +aprisaXEInterfacePort1Bandwidth OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates the bandwidth allocated to port 1." + ::= { aprisaXEInterfaceTableEntry 4 } + +aprisaXEInterfacePort2Bandwidth OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates the bandwidth allocated to port 2." + ::= { aprisaXEInterfaceTableEntry 5 } + +aprisaXEInterfacePort3Bandwidth OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates the bandwidth allocated to port 3." + ::= { aprisaXEInterfaceTableEntry 6 } + +aprisaXEInterfacePort4Bandwidth OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates the bandwidth allocated to port 4." + ::= { aprisaXEInterfaceTableEntry 7 } + +-- *************************************************************************** +-- End Interface Status +-- *************************************************************************** + + + +-- *************************************************************************** +-- 4 Wire Interfaces +-- *************************************************************************** + +aprisaXE4WirePortControlTable OBJECT-TYPE + SYNTAX SEQUENCE OF AprisaXE4WirePortControlTableEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "Status and Control table for 4Wire." + ::= { aprisaXEObjects 110 } + +aprisaXE4WirePortControlTableEntry OBJECT-TYPE + SYNTAX AprisaXE4WirePortControlTableEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "Entries for 4wire table." + INDEX { aprisaXE4WireSlotIndex, + aprisaXE4WirePortIndex + } + ::= { aprisaXE4WirePortControlTable 1 } + +AprisaXE4WirePortControlTableEntry ::= SEQUENCE { + aprisaXE4WireConnectionID INTEGER, + aprisaXE4WireSlotIndex INTEGER, + aprisaXE4WirePortIndex INTEGER, + aprisaXE4WireLoopback INTEGER, + aprisaXE4WireAdpcmCompression INTEGER, + aprisaXE4WireRxGain INTEGER, + aprisaXE4WireTxGain INTEGER, + aprisaXE4WireEInvert INTEGER, + aprisaXE4WireMInvert INTEGER, + aprisaXE4WireSignalling INTEGER, + aprisaXE4WireSignallingConnectionID INTEGER, + aprisaXE4WireInputLevel INTEGER, + aprisaXE4WireOutputLevel INTEGER + } + +aprisaXE4WireConnectionID OBJECT-TYPE + SYNTAX AprisaXEConnectionID + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Associated cross-connect Backplane Connection ID." + ::= { aprisaXE4WirePortControlTableEntry 1 } + +aprisaXE4WireSlotIndex OBJECT-TYPE + SYNTAX AprisaXESlotNumber + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Slot index for 4wire Status Control table." + ::= { aprisaXE4WirePortControlTableEntry 2 } + +aprisaXE4WirePortIndex OBJECT-TYPE + SYNTAX AprisaXEPortNumber + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Channel index for 4 Wire Control Status table." + ::= { aprisaXE4WirePortControlTableEntry 3 } + +aprisaXE4WireLoopback OBJECT-TYPE + SYNTAX FourRFLoopback + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Loopback control on or off for channels." + ::= { aprisaXE4WirePortControlTableEntry 4 } + +aprisaXE4WireAdpcmCompression OBJECT-TYPE + SYNTAX AprisaXEAdpcmCompression + MAX-ACCESS read-write + STATUS current + DESCRIPTION "ADPCM compression 16, 24, 32, 64 kbps or none." + DEFVAL { none } + ::= { aprisaXE4WirePortControlTableEntry 5 } + +aprisaXE4WireRxGain OBJECT-TYPE + SYNTAX AprisaXE4WRxGain + MAX-ACCESS read-write + STATUS obsolete + DESCRIPTION "Rx gain +4 dB to -14 dB in 0.5 dB steps." + ::= { aprisaXE4WirePortControlTableEntry 6 } + +aprisaXE4WireTxGain OBJECT-TYPE + SYNTAX AprisaXE4WTxGain + MAX-ACCESS read-write + STATUS obsolete + DESCRIPTION "Tx gain +14 dB to -4 dB in half dB steps." + ::= { aprisaXE4WirePortControlTableEntry 7 } + +aprisaXE4WireEInvert OBJECT-TYPE + SYNTAX AprisaXESignalState + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Controls E on each channel for NORMAL or INVERT polarity." + ::= { aprisaXE4WirePortControlTableEntry 8 } + +aprisaXE4WireMInvert OBJECT-TYPE + SYNTAX AprisaXESignalState + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Controls M on each channel for NORMAL or INVERT polarity." + ::= { aprisaXE4WirePortControlTableEntry 9 } + +aprisaXE4WireSignalling OBJECT-TYPE + SYNTAX INTEGER { signallingOff (0), + signallingOn (1) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Enables or disables E&M signalling for the port." + ::= { aprisaXE4WirePortControlTableEntry 10 } + +aprisaXE4WireSignallingConnectionID OBJECT-TYPE + SYNTAX AprisaXEConnectionID + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Associated signalling cross-connect Backplane Connection ID." + ::= { aprisaXE4WirePortControlTableEntry 11 } + +aprisaXE4WireInputLevel OBJECT-TYPE + SYNTAX AprisaXE4WInputLevel + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Input Level -14.0 dBr to +4.0 dBr in half dB steps." + ::= { aprisaXE4WirePortControlTableEntry 12 } + +aprisaXE4WireOutputLevel OBJECT-TYPE + SYNTAX AprisaXE4WOutputLevel + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Output Level -14.0 dBr to +4.0 dBr in 0.5 dB steps." + ::= { aprisaXE4WirePortControlTableEntry 13 } + +-- +-- End of aprisaXE4WirePortControlTable +-- + + +aprisaXE4WireStatusControlTable OBJECT-TYPE + SYNTAX SEQUENCE OF AprisaXE4WireStatusControlTableEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "Overall card control and status." + ::= { aprisaXEObjects 121 } + +aprisaXE4WireStatusControlTableEntry OBJECT-TYPE + SYNTAX AprisaXE4WireStatusControlTableEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "Status control entries." + INDEX { aprisaXE4WireStatusControlSlotIndex } + ::= { aprisaXE4WireStatusControlTable 1 } + +AprisaXE4WireStatusControlTableEntry ::= SEQUENCE { + aprisaXE4WireStatusControlSlotIndex INTEGER, + aprisaXE4WirePcmLaw INTEGER + } + +aprisaXE4WireStatusControlSlotIndex OBJECT-TYPE + SYNTAX AprisaXESlotNumber + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Index for table." + ::= { aprisaXE4WireStatusControlTableEntry 1 } + + +aprisaXE4WirePcmLaw OBJECT-TYPE + SYNTAX AprisaXEPcmLaw + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Sets A-law or u-law." + ::= { aprisaXE4WireStatusControlTableEntry 2 } + +-- *************************************************************************** +-- End 4 Wire +-- *************************************************************************** + + + +-- *************************************************************************** +-- FXO +-- *************************************************************************** + +aprisaXEFXOPortControlTable OBJECT-TYPE + SYNTAX SEQUENCE OF AprisaXEFXOPortControlTableEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "Port Control table for FXO." + ::= { aprisaXEObjects 130 } + +aprisaXEFXOPortControlTableEntry OBJECT-TYPE + SYNTAX AprisaXEFXOPortControlTableEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "Entries for FXO table." + INDEX { aprisaXEFXOPortControlSlotIndex, + aprisaXEFXOPortIndex + } + ::= { aprisaXEFXOPortControlTable 1 } + +AprisaXEFXOPortControlTableEntry ::= SEQUENCE { + aprisaXEFXOPortControlSlotIndex INTEGER, + aprisaXEFXOPortIndex INTEGER, + aprisaXEFXOLoopback INTEGER, + aprisaXEFXOAdpcmCompression INTEGER, + aprisaXEFXORxGain INTEGER, + aprisaXEFXOTxGain INTEGER, + aprisaXEFXOConnectionID INTEGER, + aprisaXEFXOSignallingConnectionID INTEGER, + aprisaXEFXOInputLevel INTEGER, + aprisaXEFXOOutputLevel INTEGER + } + +aprisaXEFXOPortControlSlotIndex OBJECT-TYPE + SYNTAX AprisaXESlotNumber + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Slot index for FXO Control table." + ::= { aprisaXEFXOPortControlTableEntry 1 } + +aprisaXEFXOPortIndex OBJECT-TYPE + SYNTAX AprisaXEPortNumber + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Port index for FXO Control table." + ::= { aprisaXEFXOPortControlTableEntry 2 } + +aprisaXEFXOLoopback OBJECT-TYPE + SYNTAX FourRFLoopback + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Loopback control on or off for ports." + ::= { aprisaXEFXOPortControlTableEntry 3 } + +aprisaXEFXOAdpcmCompression OBJECT-TYPE + SYNTAX AprisaXEAdpcmCompression + MAX-ACCESS read-write + STATUS current + DESCRIPTION "ADPCM compression 16, 24, 32, 64 kbps or none." + DEFVAL { none } + ::= { aprisaXEFXOPortControlTableEntry 4 } + +aprisaXEFXORxGain OBJECT-TYPE + SYNTAX INTEGER { fxopos100 (0), + fxopos95 (1), + fxopos90 (2), + fxopos85 (3), + fxopos80 (4), + fxopos75 (5), + fxopos70 (6), + fxopos65 (7), + fxopos60 (8), + fxopos55 (9), + fxopos50 (10), + fxopos45 (11), + fxopos40 (12), + fxopos35 (13), + fxopos30 (14), + fxopos25 (15), + fxopos20 (16), + fxopos15 (17), + fxopos10 (18), + fxopos05 (19), + fxopos0 (20), + fxoneg05 (21), + fxoneg10 (22), + fxoneg15 (23), + fxoneg20 (24), + fxoneg25 (25), + fxoneg30 (26), + fxoneg35 (27), + fxoneg40 (28), + fxoneg45 (29), + fxoneg50 (30), + fxoneg55 (31), + fxoneg60 (32), + fxoneg65 (33), + fxoneg70 (34), + fxoneg75 (35), + fxoneg80 (36), + fxoneg85 (37), + fxoneg90 (38), + fxoneg95 (39), + fxoneg100 (40) + } + MAX-ACCESS read-write + STATUS obsolete + DESCRIPTION "Rx gain -10 dB to 10 dB in 0.5 dB steps." + ::= { aprisaXEFXOPortControlTableEntry 5 } + +aprisaXEFXOTxGain OBJECT-TYPE + SYNTAX INTEGER { fxopos100 (0), + fxopos95 (1), + fxopos90 (2), + fxopos85 (3), + fxopos80 (4), + fxopos75 (5), + fxopos70 (6), + fxopos65 (7), + fxopos60 (8), + fxopos55 (9), + fxopos50 (10), + fxopos45 (11), + fxopos40 (12), + fxopos35 (13), + fxopos30 (14), + fxopos25 (15), + fxopos20 (16), + fxopos15 (17), + fxopos10 (18), + fxopos05 (19), + fxopos0 (20), + fxoneg05 (21), + fxoneg10 (22), + fxoneg15 (23), + fxoneg20 (24), + fxoneg25 (25), + fxoneg30 (26), + fxoneg35 (27), + fxoneg40 (28), + fxoneg45 (29), + fxoneg50 (30), + fxoneg55 (31), + fxoneg60 (32), + fxoneg65 (33), + fxoneg70 (34), + fxoneg75 (35), + fxoneg80 (36), + fxoneg85 (37), + fxoneg90 (38), + fxoneg95 (39), + fxoneg100 (40) + } + MAX-ACCESS read-write + STATUS obsolete + DESCRIPTION "Tx gain -10 dB to 10 dB in half dB steps." + ::= { aprisaXEFXOPortControlTableEntry 6 } + +aprisaXEFXOConnectionID OBJECT-TYPE + SYNTAX AprisaXEConnectionID + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Associated cross-connect Backplane Connection ID." + ::= { aprisaXEFXOPortControlTableEntry 7 } + +aprisaXEFXOSignallingConnectionID OBJECT-TYPE + SYNTAX AprisaXEConnectionID + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Associated signalling cross-connect Backplane Connection ID." + ::= { aprisaXEFXOPortControlTableEntry 8 } + +aprisaXEFXOInputLevel OBJECT-TYPE + SYNTAX AprisaXEFXOInputLevel + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Input Level -10.0 dBr to +1.0 dBr in half dB steps." + ::= { aprisaXEFXOPortControlTableEntry 9 } + +aprisaXEFXOOutputLevel OBJECT-TYPE + SYNTAX AprisaXEFXOOutputLevel + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Output Level -10.0 dBr to +1.0 dBr in 0.5 dB steps." + ::= { aprisaXEFXOPortControlTableEntry 10 } + +-- +-- end of table +-- + +aprisaXEFXOControlTable OBJECT-TYPE + SYNTAX SEQUENCE OF AprisaXEFXOControlTableEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "Control table for FXO." + ::= { aprisaXEObjects 140 } + +aprisaXEFXOControlTableEntry OBJECT-TYPE + SYNTAX AprisaXEFXOControlTableEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "Entries for FXO table." + INDEX { aprisaXEFXOControlSlotIndex } + ::= { aprisaXEFXOControlTable 1 } + +AprisaXEFXOControlTableEntry ::= SEQUENCE { + aprisaXEFXOControlSlotIndex INTEGER, + aprisaXEFXOSPMBandwidth INTEGER, + aprisaXEFXOSPMFrequency INTEGER, + aprisaXEFXOSPMLevel INTEGER, + aprisaXEFXOCasMode INTEGER, + aprisaXEFXOCasSignal INTEGER, + aprisaXEFXOPCMLaw INTEGER, + aprisaXEFXOOnHookSpeed INTEGER, + aprisaXEFXORingerImpedance INTEGER, + aprisaXEFXORingerThreshold INTEGER, + aprisaXEFXOLoopCurrentLimit INTEGER, + aprisaXEFXOMinLoopCurrent INTEGER, + aprisaXEFXOTipRingVoltage INTEGER, + aprisaXEFXOLineImpedance INTEGER, + aprisaXEFXOLineReversal INTEGER, + aprisaXEFXOABitFault INTEGER, + aprisaXEFXOBBitRing INTEGER, + aprisaXEFXOCBitBilling INTEGER, + aprisaXEFXODBitReversals INTEGER, + aprisaXEFXOEchoCanceller INTEGER, + aprisaXEFXOABitOffHook INTEGER + } + +aprisaXEFXOControlSlotIndex OBJECT-TYPE + SYNTAX AprisaXESlotNumber + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Slot index for FXO Control table." + ::= { aprisaXEFXOControlTableEntry 1 } + +aprisaXEFXOSPMBandwidth OBJECT-TYPE + SYNTAX INTEGER { perc15 (0), + perc35 (1), + perc55 (2), + perc75 (3) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Set the spm detector bandwidth to 1.5%, 3.5%, 5.5% or 7.5%." + ::= { aprisaXEFXOControlTableEntry 2 } + +aprisaXEFXOSPMFrequency OBJECT-TYPE + SYNTAX INTEGER { khz12 (0), + khz16 (1) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Set the spm detector frequency to 12kHz or 16kHz." + ::= { aprisaXEFXOControlTableEntry 3 } + +aprisaXEFXOSPMLevel OBJECT-TYPE + SYNTAX AprisaXEFXSPMLevel + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Set the spm detector level 0 to 27 dB." + ::= { aprisaXEFXOControlTableEntry 4 } + +aprisaXEFXOCasMode OBJECT-TYPE + SYNTAX INTEGER { casxe (0), + casse (1), + cas4w (2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Set the CAS mode to XE,SE or 4Wire compatible." + ::= { aprisaXEFXOControlTableEntry 5 } + +aprisaXEFXOCasSignal OBJECT-TYPE + SYNTAX AprisaXESignalState + MAX-ACCESS read-write + STATUS obsolete + DESCRIPTION "Set the CAS signal to normal or invert." + ::= { aprisaXEFXOControlTableEntry 6 } + +aprisaXEFXOPCMLaw OBJECT-TYPE + SYNTAX AprisaXEPcmLaw + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Set the PCM law to A-law or u-law." + ::= { aprisaXEFXOControlTableEntry 7 } + +aprisaXEFXOOnHookSpeed OBJECT-TYPE + SYNTAX INTEGER { ohsFast (0), + ohsMedium (1), + ohsSlow (2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Set the on hook speed to fast, medium or slow." + ::= { aprisaXEFXOControlTableEntry 8 } + +aprisaXEFXORingerImpedance OBJECT-TYPE + SYNTAX INTEGER { rzHigh (0), + rxSynthesized (1) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Set the ringer impedance to high or synthesized." + ::= { aprisaXEFXOControlTableEntry 9 } + +aprisaXEFXORingerThreshold OBJECT-TYPE + SYNTAX INTEGER { rtLow (0), + rtMedium (1), + rtHigh (2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Set the ringer threshold to low, medium or high." + ::= { aprisaXEFXOControlTableEntry 10 } + +aprisaXEFXOLoopCurrentLimit OBJECT-TYPE + SYNTAX INTEGER { ilimOff (0), + ilimOn (1) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Set the loop current limiter to off or on." + ::= { aprisaXEFXOControlTableEntry 11 } + +aprisaXEFXOMinLoopCurrent OBJECT-TYPE + SYNTAX INTEGER { miniLow (0), + miniMedium (1), + miniHigh (2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Set the min loop current to low, medium or high." + ::= { aprisaXEFXOControlTableEntry 12 } + +aprisaXEFXOTipRingVoltage OBJECT-TYPE + SYNTAX INTEGER { dcvLow (0), + dcvMedium (1), + dcvHigh (2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Set the tip ring voltage to low, medium or high." + ::= { aprisaXEFXOControlTableEntry 13 } + +aprisaXEFXOLineImpedance OBJECT-TYPE + SYNTAX INTEGER { acim0 (0), + acim1 (1), + acim11 (2), + acim13 (3), + acim3 (4), + acim2 (5), + acim4 (6), + acim9 (7), + acim10 (8) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Set the line impedance to 600 Ohms, 900 Ohms, + 600 Ohms + 2.16 uF, 900 Ohms + 2.16 uF, + TN12 - 220 Ohms + (820 Ohms || 120 nF), + TBR21 - 270 Ohms + (750 Ohms || 150 nF), + BT3 - 370 Ohms + (620 Ohms || 310 nF), + BT Network - 320 Ohms + (1050 Ohms || 210 nF), + China - 200 Ohms + (680 Ohms || 100 nF)" + ::= { aprisaXEFXOControlTableEntry 14 } + +aprisaXEFXOLineReversal OBJECT-TYPE + SYNTAX INTEGER { fxoLineRevOn (0), + fxoLineRevOff (1) + } + MAX-ACCESS read-write + STATUS obsolete + DESCRIPTION "Set the line reversal on/off." + ::= { aprisaXEFXOControlTableEntry 15 } + +aprisaXEFXOABitFault OBJECT-TYPE + SYNTAX AprisaXE2WireSignalState + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Set the CAS A fault bit to + Transparent Normal, Transparent Inverted, + Forced Normal or Forced Inverted." + ::= { aprisaXEFXOControlTableEntry 16 } + +aprisaXEFXOBBitRing OBJECT-TYPE + SYNTAX AprisaXE2WireSignalState + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Set the CAS B ring bit to + Transparent Normal, Transparent Inverted, + Forced Normal or Forced Inverted." + ::= { aprisaXEFXOControlTableEntry 17 } + +aprisaXEFXOCBitBilling OBJECT-TYPE + SYNTAX AprisaXE2WireSignalState + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Set the CAS C billing bit to + Transparent Normal, Transparent Inverted, + Forced Normal or Forced Inverted." + ::= { aprisaXEFXOControlTableEntry 18 } + +aprisaXEFXODBitReversals OBJECT-TYPE + SYNTAX AprisaXE2WireSignalState + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Set the CAS D reversals bit to + Transparent Normal, Transparent Inverted, + Forced Normal or Forced Inverted." + ::= { aprisaXEFXOControlTableEntry 19 } + +aprisaXEFXOEchoCanceller OBJECT-TYPE + SYNTAX INTEGER { fxoEchoCancellerOff (0), + fxoEchoCancellerOn (1), + fxoEchoCancellerAutoG164 (2), + fxoEchoCancellerAutoG165 (3), + fxoEchoCancellerReserved1 (4), + fxoEchoCancellerReserved2 (5), + fxoEchoCancellerReserved3 (6) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Set the echo canceller to off, on or auto. The + reserved values are for internal use only and + cannot be set via SNMP." + ::= { aprisaXEFXOControlTableEntry 20 } + +aprisaXEFXOABitOffHook OBJECT-TYPE + SYNTAX AprisaXE2WireSignalState + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Set the CAS A off hook bit to + Transparent Normal, Transparent Inverted, + Forced Normal or Forced Inverted." + ::= { aprisaXEFXOControlTableEntry 21 } + +-- *************************************************************************** +-- End FXO +-- *************************************************************************** + + + +-- *************************************************************************** +-- Backplane Connections +-- *************************************************************************** + +aprisaXEBackplaneConnectionTable OBJECT-TYPE + SYNTAX SEQUENCE OF AprisaXEBackplaneConnectionTableEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "Table of AprisaXE Cross connections." + ::= { aprisaXEObjects 150 } + +aprisaXEBackplaneConnectionTableEntry OBJECT-TYPE + SYNTAX AprisaXEBackplaneConnectionTableEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "Table entries define a circuit carried ove a TDM bus." + INDEX { aprisaXEBackplaneConnectionID } + ::= { aprisaXEBackplaneConnectionTable 1 } + +AprisaXEBackplaneConnectionTableEntry ::= SEQUENCE { + aprisaXEBackplaneConnectionID INTEGER, + aprisaXEBackplaneTdmBus INTEGER, + aprisaXEBackplaneStartBitPos INTEGER, + aprisaXEBackplaneLength INTEGER, + aprisaXEBackplaneInterface INTEGER + } + +aprisaXEBackplaneConnectionID OBJECT-TYPE + SYNTAX AprisaXEConnectionID + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Handle to associate circuits with backplane connections." + ::= { aprisaXEBackplaneConnectionTableEntry 1 } + +aprisaXEBackplaneTdmBus OBJECT-TYPE + SYNTAX AprisaXETdmBus + MAX-ACCESS read-write + STATUS current + DESCRIPTION "TDM Bus to switch: busA - busD." + ::= { aprisaXEBackplaneConnectionTableEntry 2 } + +aprisaXEBackplaneStartBitPos OBJECT-TYPE + SYNTAX INTEGER (0..2047) + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Start bit position on the associated TDM bus (0 - 2047)." + DEFVAL { 0 } + ::= { aprisaXEBackplaneConnectionTableEntry 3 } + +aprisaXEBackplaneLength OBJECT-TYPE + SYNTAX INTEGER (0..2047) + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Number of bits to place on the backplane TDM bus (0 - 2047)." + DEFVAL { 0 } + ::= { aprisaXEBackplaneConnectionTableEntry 4 } + +aprisaXEBackplaneInterface OBJECT-TYPE + SYNTAX AprisaXEInterfaceCnxnType + MAX-ACCESS read-write + STATUS current + DESCRIPTION "The type of circuit this backplane connection is carrying." + ::= { aprisaXEBackplaneConnectionTableEntry 5 } + + +aprisaXEBackplaneControl OBJECT IDENTIFIER ::= { aprisaXEObjects 180 } + +aprisaXEBackplaneControlConnectionID OBJECT-TYPE + SYNTAX AprisaXEConnectionID + MAX-ACCESS read-write + STATUS current + DESCRIPTION "The Backplane Connection ID to add or delete." + ::= { aprisaXEBackplaneControl 1 } + +aprisaXEBackplaneControlTdmBus OBJECT-TYPE + SYNTAX AprisaXETdmBus + MAX-ACCESS read-write + STATUS current + DESCRIPTION "TDM Bus to switch: busA - busD." + ::= { aprisaXEBackplaneControl 2 } + +aprisaXEBackplaneControlStartBitPos OBJECT-TYPE + SYNTAX INTEGER (0..2047) + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Start bit position on the associated TDM bus (0 - 2047)." + DEFVAL { 0 } + ::= { aprisaXEBackplaneControl 3 } + +aprisaXEBackplaneControlLength OBJECT-TYPE + SYNTAX INTEGER (0..2048) + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Number of bits to place on the backplane TDM bus (0 - 2048)." + DEFVAL { 0 } + ::= { aprisaXEBackplaneControl 4 } + +aprisaXEBackplaneControlInterface OBJECT-TYPE + SYNTAX AprisaXEInterfaceCnxnType + MAX-ACCESS read-write + STATUS current + DESCRIPTION "The type of circuit this backplane connection is carrying." + ::= { aprisaXEBackplaneControl 5 } + +aprisaXEBackplaneControlCommand OBJECT-TYPE + SYNTAX INTEGER { noCommand (0), + addCommand (1), + deleteCommand (2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Command to send to act upon rows in the Backplane + Connection table." + ::= { aprisaXEBackplaneControl 6 } + +-- *************************************************************************** +-- End Backplane Connections +-- *************************************************************************** + + + +-- *************************************************************************** +-- Aggregate Connections +-- *************************************************************************** + +aprisaXEAggregateConnectionTable OBJECT-TYPE + SYNTAX SEQUENCE OF AprisaXEAggregateConnectionTableEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "Table of Aggregated backplane connections used for + interfaces with further cross-connection capability." + ::= { aprisaXEObjects 160 } + +aprisaXEAggregateConnectionTableEntry OBJECT-TYPE + SYNTAX AprisaXEAggregateConnectionTableEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "" + INDEX { aprisaXEAggregateBackplaneID, + aprisaXEAggregateInterfaceID, + aprisaXEAggregateStartBitPos + } + ::= { aprisaXEAggregateConnectionTable 1 } + +AprisaXEAggregateConnectionTableEntry ::= SEQUENCE { + aprisaXEAggregateBackplaneID Integer32, + aprisaXEAggregateInterfaceID Integer32, + aprisaXEAggregateStartBitPos INTEGER, + aprisaXEAggregateLength INTEGER, + aprisaXEAggregateOffset INTEGER, + aprisaXEAggregateE1Port INTEGER + } + +aprisaXEAggregateBackplaneID OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Backplane Connection identifier." + ::= { aprisaXEAggregateConnectionTableEntry 1 } + +aprisaXEAggregateInterfaceID OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "" + ::= { aprisaXEAggregateConnectionTableEntry 2 } + +aprisaXEAggregateStartBitPos OBJECT-TYPE + SYNTAX INTEGER (0..2047) + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Start bit position of the data coming into the + cross-connection device (SWITI) for this interface connection." + ::= { aprisaXEAggregateConnectionTableEntry 3 } + +aprisaXEAggregateLength OBJECT-TYPE + SYNTAX INTEGER (0..2047) + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Number of bits required for this interface connection." + ::= { aprisaXEAggregateConnectionTableEntry 4 } + +aprisaXEAggregateOffset OBJECT-TYPE + SYNTAX INTEGER (0..2047) + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Offset into the aggregate connection where this + interface connection is placed." + ::= { aprisaXEAggregateConnectionTableEntry 5 } + +aprisaXEAggregateE1Port OBJECT-TYPE + SYNTAX AprisaXEPortNumber + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Port number associated with this connection." + ::= { aprisaXEAggregateConnectionTableEntry 6 } + + +aprisaXEAggregateControl OBJECT IDENTIFIER ::= { aprisaXEObjects 170 } + +aprisaXEAggregateControlBackplaneID OBJECT-TYPE + SYNTAX INTEGER (0..2047) + MAX-ACCESS read-write + STATUS current + DESCRIPTION "The backplane ID to add or delete." + ::= { aprisaXEAggregateControl 1 } + +aprisaXEAggregateControlInterfaceID OBJECT-TYPE + SYNTAX INTEGER (0..2047) + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Aggregate connection identifier." + ::= { aprisaXEAggregateControl 2 } + +aprisaXEAggregateControlStartBitPos OBJECT-TYPE + SYNTAX INTEGER (0..2047) + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Start bit position of the data coming into the + cross-connection device (SWITI) for this interface connection." + ::= { aprisaXEAggregateControl 3 } + +aprisaXEAggregateControlLength OBJECT-TYPE + SYNTAX INTEGER (0..2047) + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Number of bits required for this interface connection." + ::= { aprisaXEAggregateControl 4 } + +aprisaXEAggregateControlOffset OBJECT-TYPE + SYNTAX INTEGER (0..2047) + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Offset into the aggregate connection where this + interface connection is placed." + ::= { aprisaXEAggregateControl 5 } + +aprisaXEAggregateControlCommand OBJECT-TYPE + SYNTAX INTEGER { noCommand (0), + addCommand (1), + deleteCommand (2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Command to send to act upon the rows in the Aggregate + Connection table." + ::= { aprisaXEAggregateControl 6 } + +-- *************************************************************************** +-- End Aggregate Connections +-- *************************************************************************** + + + +-- *************************************************************************** +-- Cross Connect Control +-- *************************************************************************** + +aprisaXECrossConnectControl OBJECT IDENTIFIER ::= { aprisaXEObjects 200 } + +aprisaXECrossConnectControlCommand OBJECT-TYPE + SYNTAX INTEGER { noCommand (0), + deleteCommand (1), + activateCommand (2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Command to send to delete all current cross-connections or + to activate a new set of cross-connections." + ::= { aprisaXECrossConnectControl 1 } + +aprisaXEMotherboardExtendedModeCapable OBJECT-TYPE + SYNTAX INTEGER { extModeNo (0), + extModeYes (1) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Allows the cross connect application to determine whether + to stripe cross connections or not." + ::= { aprisaXECrossConnectControl 2 } + +aprisaXEEthernetActivationStatus OBJECT-TYPE + SYNTAX AprisaXECCActivationStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Ethernet activation status i.e activated, failed or + currently busy activating." + ::= { aprisaXECrossConnectControl 3 } + +-- *************************************************************************** +-- End Cross Connect Control +-- *************************************************************************** + + + +-- *************************************************************************** +-- Cross Connect Activation Status Table +-- *************************************************************************** + +aprisaXECCActivationStatusTable OBJECT-TYPE + SYNTAX SEQUENCE OF AprisaXECCActivationStatusTableEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "CC Activation status table." + ::= { aprisaXEObjects 202 } + +aprisaXECCActivationStatusTableEntry OBJECT-TYPE + SYNTAX AprisaXECCActivationStatusTableEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "Entries for CC Activation status table." + INDEX { aprisaXECCActivationStatusSlotIndex } + ::= { aprisaXECCActivationStatusTable 1 } + +AprisaXECCActivationStatusTableEntry ::= SEQUENCE { + aprisaXECCActivationStatusSlotIndex INTEGER, + aprisaXECCActivationStatus INTEGER + } + +aprisaXECCActivationStatusSlotIndex OBJECT-TYPE + SYNTAX AprisaXESlotNumber + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Slot index for CC Activation Status table." + ::= { aprisaXECCActivationStatusTableEntry 1 } + +aprisaXECCActivationStatus OBJECT-TYPE + SYNTAX AprisaXECCActivationStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Cross-connect activation status i.e activated, failed or + currently busy activating." + ::= { aprisaXECCActivationStatusTableEntry 2 } + +-- *************************************************************************** +-- End Cross Connect Activation Status Table +-- *************************************************************************** + + + +-- *************************************************************************** +-- FXS +-- *************************************************************************** + +aprisaXEFXSPortControlTable OBJECT-TYPE + SYNTAX SEQUENCE OF AprisaXEFXSPortControlTableEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "Port Control table for FXS." + ::= { aprisaXEObjects 190 } + +aprisaXEFXSPortControlTableEntry OBJECT-TYPE + SYNTAX AprisaXEFXSPortControlTableEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "Entries for FXS table." + INDEX { aprisaXEFXSPortControlSlotIndex, + aprisaXEFXSPortIndex + } + ::= { aprisaXEFXSPortControlTable 1 } + +AprisaXEFXSPortControlTableEntry ::= SEQUENCE { + aprisaXEFXSPortControlSlotIndex INTEGER, + aprisaXEFXSPortIndex INTEGER, + aprisaXEFXSLoopback INTEGER, + aprisaXEFXSAdpcmCompression INTEGER, + aprisaXEFXSRxGain INTEGER, + aprisaXEFXSTxGain INTEGER, + aprisaXEFXSConnectionID INTEGER, + aprisaXEFXSSignallingConnectionID INTEGER, + aprisaXEFXSInputLevel INTEGER, + aprisaXEFXSOutputLevel INTEGER, + aprisaXEFXSPathMute INTEGER + } + +aprisaXEFXSPortControlSlotIndex OBJECT-TYPE + SYNTAX AprisaXESlotNumber + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Slot index for FXS Control table." + ::= { aprisaXEFXSPortControlTableEntry 1 } + +aprisaXEFXSPortIndex OBJECT-TYPE + SYNTAX AprisaXEPortNumber + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Port index for FXS Control table." + ::= { aprisaXEFXSPortControlTableEntry 2 } + +aprisaXEFXSLoopback OBJECT-TYPE + SYNTAX FourRFLoopback + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Loopback control on or off for ports." + ::= { aprisaXEFXSPortControlTableEntry 3 } + +aprisaXEFXSAdpcmCompression OBJECT-TYPE + SYNTAX AprisaXEAdpcmCompression + MAX-ACCESS read-write + STATUS current + DESCRIPTION "ADPCM compression 16, 24, 32, 64 kbps or none." + DEFVAL { none } + ::= { aprisaXEFXSPortControlTableEntry 4 } + +aprisaXEFXSRxGain OBJECT-TYPE + SYNTAX INTEGER { fxsrxpos30 (0), + fxsrxpos25 (1), + fxsrxpos20 (2), + fxsrxpos15 (3), + fxsrxpos10 (4), + fxsrxpos05 (5), + fxsrxpos0 (6), + fxsrxneg05 (7), + fxsrxneg10 (8), + fxsrxneg15 (9), + fxsrxneg20 (10), + fxsrxneg25 (11), + fxsrxneg30 (12), + fxsrxneg35 (13), + fxsrxneg40 (14), + fxsrxneg45 (15), + fxsrxneg50 (16), + fxsrxneg55 (17), + fxsrxneg60 (18), + fxsrxneg65 (19), + fxsrxneg70 (20), + fxsrxneg75 (21), + fxsrxneg80 (22), + fxsrxneg85 (23), + fxsrxneg90 (24), + fxsrxneg95 (25) + } + MAX-ACCESS read-write + STATUS obsolete + DESCRIPTION "Rx gain -9.5 dB to +3 dB in 0.5 dB steps." + ::= { aprisaXEFXSPortControlTableEntry 5 } + +aprisaXEFXSTxGain OBJECT-TYPE + SYNTAX INTEGER { fxstxpos95 (0), + fxstxpos90 (1), + fxstxpos85 (2), + fxstxpos80 (3), + fxstxpos75 (4), + fxstxpos70 (5), + fxstxpos65 (6), + fxstxpos60 (7), + fxstxpos55 (8), + fxstxpos50 (9), + fxstxpos45 (10), + fxstxpos40 (11), + fxstxpos35 (12), + fxstxpos30 (13), + fxstxpos25 (14), + fxstxpos20 (15), + fxstxpos15 (16), + fxstxpos10 (17), + fxstxpos05 (18), + fxstxpos0 (19), + fxstxneg05 (20), + fxstxneg10 (21), + fxstxneg15 (22), + fxstxneg20 (23), + fxstxneg25 (24), + fxstxneg30 (25) + } + MAX-ACCESS read-write + STATUS obsolete + DESCRIPTION "Tx gain -3 dB to 9.5 dB in 0.5 dB steps." + ::= { aprisaXEFXSPortControlTableEntry 6 } + +aprisaXEFXSConnectionID OBJECT-TYPE + SYNTAX AprisaXEConnectionID + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Associated cross-connect Backplane Connection ID." + ::= { aprisaXEFXSPortControlTableEntry 7 } + +aprisaXEFXSSignallingConnectionID OBJECT-TYPE + SYNTAX AprisaXEConnectionID + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Associated signalling cross-connect Backplane Connection ID." + ::= { aprisaXEFXSPortControlTableEntry 8 } + +aprisaXEFXSInputLevel OBJECT-TYPE + SYNTAX AprisaXEFXSInputLevel + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Input Level -9.0 dBr to +3.0 dBr in half dB steps." + ::= { aprisaXEFXSPortControlTableEntry 9 } + +aprisaXEFXSOutputLevel OBJECT-TYPE + SYNTAX AprisaXEFXSOutputLevel + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Output Level -9.5 dBr to +2.5 dBr in 0.5 dB steps." + ::= { aprisaXEFXSPortControlTableEntry 10 } + +aprisaXEFXSPathMute OBJECT-TYPE + SYNTAX AprisaXEFXSPathMute + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Applies DFXS Mute Function - No Mute, Mute Rx or Mute Tx." + ::= { aprisaXEFXSPortControlTableEntry 11 } + +-- +-- end of table +-- + +aprisaXEFXSControlTable OBJECT-TYPE + SYNTAX SEQUENCE OF AprisaXEFXSControlTableEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "Control table for FXS." + ::= { aprisaXEObjects 195 } + +aprisaXEFXSControlTableEntry OBJECT-TYPE + SYNTAX AprisaXEFXSControlTableEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "Entries for FXS table." + INDEX { aprisaXEFXSControlSlotIndex } + ::= { aprisaXEFXSControlTable 1 } + +AprisaXEFXSControlTableEntry ::= SEQUENCE { + aprisaXEFXSControlSlotIndex INTEGER, + aprisaXEFXSPCMLaw INTEGER, + aprisaXEFXSEchoCanceller INTEGER, + aprisaXEFXSBillingToneFrequency INTEGER, + aprisaXEFXSBillingToneAmplitude INTEGER, + aprisaXEFXSBillingToneDecay INTEGER, + aprisaXEFXSRingerFrequency INTEGER, + aprisaXEFXSRingerAmplitude INTEGER, + aprisaXEFXSLineImpedance INTEGER, + aprisaXEFXSCasMode INTEGER, + aprisaXEFXSCasSignal INTEGER, + aprisaXEFXSTransHybridBalance INTEGER, + aprisaXEFXSLineReversal INTEGER, + aprisaXEFXSCalibrate INTEGER, + aprisaXEFXSABitFault INTEGER, + aprisaXEFXSBBitRing INTEGER, + aprisaXEFXSCBitBilling INTEGER, + aprisaXEFXSDBitReversals INTEGER, + aprisaXEFXSLoopParameters INTEGER, + aprisaXEFXSABitOffHook INTEGER + } + +aprisaXEFXSControlSlotIndex OBJECT-TYPE + SYNTAX AprisaXESlotNumber + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Slot index for FXS Control table." + ::= { aprisaXEFXSControlTableEntry 1 } + +aprisaXEFXSPCMLaw OBJECT-TYPE + SYNTAX AprisaXEPcmLaw + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Set the PCM law to A-law or u-law." + ::= { aprisaXEFXSControlTableEntry 2 } + +aprisaXEFXSEchoCanceller OBJECT-TYPE + SYNTAX INTEGER { echoCancellerOff (0), + echoCancellerOn (1) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Set the echo canceller to on or off." + ::= { aprisaXEFXSControlTableEntry 3 } + +aprisaXEFXSBillingToneFrequency OBJECT-TYPE + SYNTAX INTEGER { khz12 (0), + khz16 (1) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Set the billing tone generator frequency to 12kHz or 16kHz." + ::= { aprisaXEFXSControlTableEntry 4 } + +aprisaXEFXSBillingToneAmplitude OBJECT-TYPE + SYNTAX INTEGER { mv400 (6), + mv300 (0), + mv250 (1), + mv200 (2), + mv150 (3), + mv100 (4), + mv50 (5) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Set the billing tone generator amplitude to 400mV, 300mV, + 250mV, 200mV, 150mV, 100mV or 50mV. Note, that software + release 7.3.x only supports 400mV, 300mV, 200mV and 100mV." + ::= { aprisaXEFXSControlTableEntry 5 } + +aprisaXEFXSBillingToneDecay OBJECT-TYPE + SYNTAX INTEGER { ms02 (0), + ms05 (1), + ms1 (2), + ms2 (3), + ms5 (4), + ms10 (5), + ms20 (6) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Set the billing tone generator attack decay ramp + to 0.2ms, 0.5ms, 1ms, 2ms, 5ms, 10ms or 20ms." + ::= { aprisaXEFXSControlTableEntry 6 } + +aprisaXEFXSRingerFrequency OBJECT-TYPE + SYNTAX INTEGER { hz17 (0), + hz25 (1), + hz50 (2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Set the ringer frequency to 17Hz, 25Hz or 50Hz." + ::= { aprisaXEFXSControlTableEntry 7 } + +aprisaXEFXSRingerAmplitude OBJECT-TYPE + SYNTAX INTEGER { vrms40 (0), + vrms45 (1), + vrms50 (2), + vrms55 (3), + vrms60 (4) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Set the ringer amplitude to 40 V RMS, 45 V RMS, + 50 V RMS, 55 V RMS or 60 V RMS." + ::= { aprisaXEFXSControlTableEntry 8 } + +aprisaXEFXSLineImpedance OBJECT-TYPE + SYNTAX INTEGER { lineImpd1 (0), + lineImpd2 (1), + lineImpd3 (2), + lineImpd4 (3), + lineImpd5 (4), + lineImpd6 (5), + lineImpd7 (6) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Set the subscriber line impedance to 600 Ohms, 900 Ohms, + 600 Ohms + 2.16 uF, 900 Ohms + 2.16 uF, + TN12 - 220 Ohms + (820 Ohms || 120 nF), + TBR21 - 270 Ohms + (750 Ohms || 150 nF), + BT3 - 370 Ohms + (620 Ohms || 310 nF)" + ::= { aprisaXEFXSControlTableEntry 9 } + +aprisaXEFXSCasMode OBJECT-TYPE + SYNTAX INTEGER { casxe (0), + casse (1), + cas4w (2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Set the CAS mode to XE,SE or 4Wire compatible." + ::= { aprisaXEFXSControlTableEntry 10 } + +aprisaXEFXSCasSignal OBJECT-TYPE + SYNTAX AprisaXESignalState + MAX-ACCESS read-write + STATUS obsolete + DESCRIPTION "Set the CAS signal to normal or invert." + ::= { aprisaXEFXSControlTableEntry 11 } + +aprisaXEFXSTransHybridBalance OBJECT-TYPE + SYNTAX INTEGER { transHybridBal1 (0), + transHybridBal2 (1), + transHybridBal3 (2), + transHybridBal4 (3), + transHybridBal5 (4), + transHybridBal6 (5), + transHybridBal7 (6), + transHybridBal8 (7) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Set the trans hybrid balance to 4.08dB, 2.5dB, + 1.16dB, 0dB, -1.02dB, -1.94dB, -2.77dB, Off" + ::= { aprisaXEFXSControlTableEntry 12 } + +aprisaXEFXSLineReversal OBJECT-TYPE + SYNTAX INTEGER { fxsLineRevOn (0), + fxsLineRevOff (1) + } + MAX-ACCESS read-write + STATUS obsolete + DESCRIPTION "Set the line reversal on/off." + ::= { aprisaXEFXSControlTableEntry 13 } + +aprisaXEFXSCalibrate OBJECT-TYPE + SYNTAX INTEGER { fxsCalibrateNo (0), + fxsCalibrateYes (1) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Recalibrate the card yes/no." + ::= { aprisaXEFXSControlTableEntry 14 } + +aprisaXEFXSABitFault OBJECT-TYPE + SYNTAX AprisaXE2WireSignalState + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Set the CAS A fault bit to + Transparent Normal, Transparent Inverted, + Forced Normal or Forced Inverted." + ::= { aprisaXEFXSControlTableEntry 15 } + +aprisaXEFXSBBitRing OBJECT-TYPE + SYNTAX AprisaXE2WireSignalState + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Set the CAS B ring bit to + Transparent Normal, Transparent Inverted, + Forced Normal or Forced Inverted." + ::= { aprisaXEFXSControlTableEntry 16 } + +aprisaXEFXSCBitBilling OBJECT-TYPE + SYNTAX AprisaXE2WireSignalState + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Set the CAS C billing bit to + Transparent Normal, Transparent Inverted, + Forced Normal or Forced Inverted." + ::= { aprisaXEFXSControlTableEntry 17 } + +aprisaXEFXSDBitReversals OBJECT-TYPE + SYNTAX AprisaXE2WireSignalState + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Set the CAS D reversals bit to + Transparent Normal, Transparent Inverted, + Forced Normal or Forced Inverted." + ::= { aprisaXEFXSControlTableEntry 18 } + +aprisaXEFXSLoopParameters OBJECT-TYPE + SYNTAX INTEGER { fxsLoopParamDefault (0), + fxsLoopParamTelkomSA (1) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Set the loop parameters to 'default' or 'Telkom SA Limited'." + ::= { aprisaXEFXSControlTableEntry 19 } + +aprisaXEFXSABitOffHook OBJECT-TYPE + SYNTAX AprisaXE2WireSignalState + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Set the CAS A off hook bit to + Transparent Normal, Transparent Inverted, + Forced Normal or Forced Inverted." + ::= { aprisaXEFXSControlTableEntry 20 } + +-- *************************************************************************** +-- End FXS +-- *************************************************************************** + + + +-- *************************************************************************** +-- HSS +-- *************************************************************************** + +aprisaXEHSSControlTable OBJECT-TYPE + SYNTAX SEQUENCE OF AprisaXEHSSControlTableEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "Control table for HSS." + ::= { aprisaXEObjects 207 } + +aprisaXEHSSControlTableEntry OBJECT-TYPE + SYNTAX AprisaXEHSSControlTableEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "Entries for HSS table." + INDEX { aprisaXEHSSControlSlotIndex } + ::= { aprisaXEHSSControlTable 1 } + +AprisaXEHSSControlTableEntry ::= SEQUENCE { + aprisaXEHSSControlSlotIndex INTEGER, + aprisaXEHSSConnectionID INTEGER, + aprisaXEHSSSignallingID INTEGER, + aprisaXEHSSEquipmentMode INTEGER, + aprisaXEHSSLoopback INTEGER, + aprisaXEHSSNetworkClockSource INTEGER, + aprisaXEHSSSerialBaudRate INTEGER, + aprisaXEHSSV110BaudRate INTEGER, + aprisaXEHSSSendHandshakingMode INTEGER, + aprisaXEHSSDataReadyMode INTEGER, + aprisaXEHSSCarrierDetectMode INTEGER, + aprisaXEHSSClockSelection INTEGER, + aprisaXEHSSXTxCEnabled INTEGER, + aprisaXEHSSSerialMode INTEGER + } + +aprisaXEHSSControlSlotIndex OBJECT-TYPE + SYNTAX AprisaXESlotNumber + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Slot index for HSS Control Table." + ::= { aprisaXEHSSControlTableEntry 1 } + +aprisaXEHSSConnectionID OBJECT-TYPE + SYNTAX AprisaXEConnectionID + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Backplane Connection ID for data connection." + ::= { aprisaXEHSSControlTableEntry 2 } + +aprisaXEHSSSignallingID OBJECT-TYPE + SYNTAX AprisaXEConnectionID + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Backplane connection ID for signalling/control connection." + ::= { aprisaXEHSSControlTableEntry 3 } + +aprisaXEHSSEquipmentMode OBJECT-TYPE + SYNTAX AprisaXESerialEquipmentMode + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Terminal Equipment mode, DCE or DTE, this is a direct reflection + of the equipment mode based on the type of cable currently + connected. The value is not defined if no cable is attached." + ::= { aprisaXEHSSControlTableEntry 4 } + +aprisaXEHSSLoopback OBJECT-TYPE + SYNTAX FourRFLoopback + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Interface loopback control." + DEFVAL { 0 } + ::= { aprisaXEHSSControlTableEntry 5 } + +aprisaXEHSSNetworkClockSource OBJECT-TYPE + SYNTAX FourRFNetworkClockSelect + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Controls whether the port drive the clock source or not." + ::= { aprisaXEHSSControlTableEntry 6 } + +aprisaXEHSSSerialBaudRate OBJECT-TYPE + SYNTAX INTEGER (1..256) + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Serial Baud rate where 1 = 8kbps and 256 = 2Mbps." + ::= { aprisaXEHSSControlTableEntry 7 } + +aprisaXEHSSV110BaudRate OBJECT-TYPE + SYNTAX INTEGER { v110-600 (0), + v110-1200 (1), + v110-2400 (2), + v110-4800 (3), + v110-7200 (4), + v110-9600 (5), + v110-12000 (6), + v110-14400 (7), + v110-19200 (8), + v110-24000 (9), + v110-28800 (10), + v110-38400 (11) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION "V110 baud rate." + ::= { aprisaXEHSSControlTableEntry 8 } + +aprisaXEHSSSendHandshakingMode OBJECT-TYPE + SYNTAX INTEGER { rts-ctsOff (0), + rts-ctsOn (1), + rts-ctsCarrier (2), + rts-ctsCarrierRemote (3), + rts-ctsCarrierLocalDCD (4), + rts-ctsCarrierLocalRTS (5), + rts-ctsCarrierLocalRTS1ms (6), + rts-ctsCarrierLocalRTS24ms (7) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Select 1 of 8 RTS/CTS modes of operation." + ::= { aprisaXEHSSControlTableEntry 9 } + +aprisaXEHSSDataReadyMode OBJECT-TYPE + SYNTAX INTEGER { dsr-dtrOff (0), + dsr-dtrOn (1), + dsr-dtrCarrier (2), + dsr-dtrCarrierRemote (3) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Select 1 of 8 DSR/DTR modes." + ::= { aprisaXEHSSControlTableEntry 10 } + +aprisaXEHSSCarrierDetectMode OBJECT-TYPE + SYNTAX INTEGER { dcdOff (0), + dcdOn (1), + dcdCarrierRemoteDCD (2), + dcdCarrierLocalDTR (3) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Select 1 of 4 DCD modes." + ::= { aprisaXEHSSControlTableEntry 11 } + +aprisaXEHSSClockSelection OBJECT-TYPE + SYNTAX INTEGER { hssClockInternal (0), + hssClockXTxC (1), + hssClockTxC (2), + hssClockOverhead (3), + hssClockNoOverhead (4), + hssClockXTxC-RxC (5), + hssClockXTxCNoOverhead (6) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Select the clock mode internal to the HSS traffic path." + ::= { aprisaXEHSSControlTableEntry 12 } + +aprisaXEHSSXTxCEnabled OBJECT-TYPE + SYNTAX INTEGER { hssxTxCEnabled (0), + hssxTxCDisabled (1) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Select whether XTxC generation is enabled or disabled for + the port. The default is enabled." + ::= { aprisaXEHSSControlTableEntry 13 } + +aprisaXEHSSSerialMode OBJECT-TYPE + SYNTAX AprisaXEHssSerialMode + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates the type of serial interface cable is connected to + the HSS port." + ::= { aprisaXEHSSControlTableEntry 14 } + +-- *************************************************************************** +-- End HSS +-- *************************************************************************** + + + +-- *************************************************************************** +-- V24 +-- *************************************************************************** + +aprisaXEV24PortControlTable OBJECT-TYPE + SYNTAX SEQUENCE OF AprisaXEV24PortControlTableEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "Port Control table for V24." + ::= { aprisaXEObjects 210 } + +aprisaXEV24PortControlTableEntry OBJECT-TYPE + SYNTAX AprisaXEV24PortControlTableEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "Entries for V24 table." + INDEX { aprisaXEV24PortControlSlotIndex, + aprisaXEV24PortIndex + } + ::= { aprisaXEV24PortControlTable 1 } + +AprisaXEV24PortControlTableEntry ::= SEQUENCE { + aprisaXEV24PortControlSlotIndex INTEGER, + aprisaXEV24PortIndex INTEGER, + aprisaXEV24BaudRate INTEGER, + aprisaXEV24Loopback INTEGER, + aprisaXEV24DataBits INTEGER, + aprisaXEV24StopBits INTEGER, + aprisaXEV24ParityBits INTEGER, + aprisaXEV24ConnectionID INTEGER + } + +aprisaXEV24PortControlSlotIndex OBJECT-TYPE + SYNTAX AprisaXESlotNumber + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Slot index for V24 Control table." + ::= { aprisaXEV24PortControlTableEntry 1 } + +aprisaXEV24PortIndex OBJECT-TYPE + SYNTAX AprisaXEPortNumber + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Port index for V24 Control table." + ::= { aprisaXEV24PortControlTableEntry 2 } + +aprisaXEV24BaudRate OBJECT-TYPE + SYNTAX INTEGER { v24-300 (0), + v24-600 (1), + v24-1200 (2), + v24-2400 (3), + v24-4800 (4), + v24-7200 (5), + v24-9600 (6), + v24-12800 (7), + v24-14400 (8), + v24-19200 (9), + v24-23040 (10), + v24-28800 (11), + v24-38400 (12), + v24-57600 (13), + v24-115200 (14) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Baud Rate from 300 baud to 115200 baud." + DEFVAL { none } + ::= { aprisaXEV24PortControlTableEntry 3 } + +aprisaXEV24Loopback OBJECT-TYPE + SYNTAX FourRFLoopback + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Loopback control on or off for ports." + ::= { aprisaXEV24PortControlTableEntry 4 } + +aprisaXEV24DataBits OBJECT-TYPE + SYNTAX INTEGER { databits7 (0), + databits8 (1) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION "No of data bits used, 7 or 8." + ::= { aprisaXEV24PortControlTableEntry 5 } + +aprisaXEV24StopBits OBJECT-TYPE + SYNTAX INTEGER { stopbits1 (0), + stopbits2 (1) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION "No of stop bits used, 1 or 2." + ::= { aprisaXEV24PortControlTableEntry 6 } + +aprisaXEV24ParityBits OBJECT-TYPE + SYNTAX INTEGER { paritybits0 (0), + paritybits1 (1) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION "No of parity bits used, 0 or 1." + ::= { aprisaXEV24PortControlTableEntry 7 } + +aprisaXEV24ConnectionID OBJECT-TYPE + SYNTAX AprisaXEConnectionID + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Associated cross-connect Backplane Connection ID." + ::= { aprisaXEV24PortControlTableEntry 8 } + +-- *************************************************************************** +-- End V24 +-- *************************************************************************** + + + +-- *************************************************************************** +-- Upgrade Control +-- +-- Software upgrade (using TFTP) can be performed by setting the required +-- software version string and setting the command OID. This results in a +-- file being uploaded from the server release_x_y_z.cfg. This file lists the +-- files required for the specified software release. TFTP is then used to +-- upload any files not currently installed and the required images are +-- activated. +-- +-- *************************************************************************** + +aprisaXESoftwareUpgradeControl OBJECT IDENTIFIER ::= { aprisaXEObjects 300 } + +aprisaXESoftwareUpgradeVersion OBJECT-TYPE + SYNTAX DisplayString ( SIZE (0..16) ) + MAX-ACCESS read-write + STATUS current + DESCRIPTION "New software version details of the form x_y_z." + ::= { aprisaXESoftwareUpgradeControl 1 } + +aprisaXESoftwareUpgradeCommand OBJECT-TYPE + SYNTAX INTEGER { none (0), + upgrade (1) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Command used to instigate a software upgrade." + ::= { aprisaXESoftwareUpgradeControl 2 } + +aprisaXESoftwareUpgradeResult OBJECT-TYPE + SYNTAX FourRFProcessResultType + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Status of a software upgrade, this will have to be polled to + follow the upload progress." + ::= { aprisaXESoftwareUpgradeControl 3 } + +aprisaXESoftwareUpgradeControlGroup OBJECT-GROUP + OBJECTS { aprisaXESoftwareUpgradeVersion, + aprisaXESoftwareUpgradeCommand, + aprisaXESoftwareUpgradeResult + } + STATUS current + DESCRIPTION "The Aprisa XE software upgrade group." + ::= { aprisaXEGroups 300 } + +-- *************************************************************************** +-- End Upgrade Control +-- *************************************************************************** + + + +-- *************************************************************************** +-- Ethernet Table +-- +-- A table which maintains the VLAN and QOS configuration of each of +-- the User Ethernet Ports +-- +-- *************************************************************************** + +aprisaXEEthernetTable OBJECT-TYPE + SYNTAX SEQUENCE OF AprisaXEEthernetTableEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "Table used to display and configure Ethernet settings." + ::= { aprisaXEObjects 97 } + +aprisaXEEthernetTableEntry OBJECT-TYPE + SYNTAX AprisaXEEthernetTableEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "Individual Ethernet port settings." + INDEX { aprisaXEEthernetPortNum } + ::= { aprisaXEEthernetTable 1 } + +AprisaXEEthernetTableEntry ::= SEQUENCE { + aprisaXEEthernetPortNum INTEGER, + aprisaXEEthernetGroup INTEGER, + aprisaXEEthernetIngressRate INTEGER, + aprisaXEEthernetPortPriority INTEGER + } + +aprisaXEEthernetPortNum OBJECT-TYPE + SYNTAX AprisaXEEthernetPortNumber + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The port number, there are four ports on the hub." + ::= { aprisaXEEthernetTableEntry 1 } + +aprisaXEEthernetGroup OBJECT-TYPE + SYNTAX AprisaXEEthernetGroup + MAX-ACCESS read-write + STATUS current + DESCRIPTION "The Ethernet Group of which this port is a member." + ::= { aprisaXEEthernetTableEntry 2 } + +aprisaXEEthernetIngressRate OBJECT-TYPE + SYNTAX AprisaXEEthernetFrameRate + MAX-ACCESS read-write + STATUS current + DESCRIPTION "The ingress frame rate limit for this port." + ::= { aprisaXEEthernetTableEntry 3 } + +aprisaXEEthernetPortPriority OBJECT-TYPE + SYNTAX AprisaXEEthernetPortPriority + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Indicates the bandwidth allocated to this port." + ::= { aprisaXEEthernetTableEntry 4 } + + +-- *************************************************************************** +-- Ethernet Settings +-- +-- The global VLAN and QOS configuration of the Ethernet Switch +-- +-- *************************************************************************** + +aprisaXEEthernetVlanQosSettings OBJECT IDENTIFIER ::= { aprisaXEObjects 98 } + +aprisaXEEthernetGrouping OBJECT-TYPE + SYNTAX AprisaXEEthernetGrouping + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Indicates whether Ethernet grouping (VLANs) is enabled or disabled." + ::= { aprisaXEEthernetVlanQosSettings 1 } + +aprisaXEEthernetManagementGroup OBJECT-TYPE + SYNTAX AprisaXEEthernetGroup + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The Ethernet Group for management." + ::= { aprisaXEEthernetVlanQosSettings 2 } + +aprisaXEEthernetPrioQueueScheduling OBJECT-TYPE + SYNTAX AprisaXEEthernetPrioQueueScheduling + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Indicates Ethernet priority queue scheduling scheme (either strict or weighted)." + ::= { aprisaXEEthernetVlanQosSettings 3 } + +aprisaXEEthernetPrioQueueMapping OBJECT-TYPE + SYNTAX AprisaXEEthernetPrioQueueMapping + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Indicates the IEEE 802.1 Ethernet priority queue mapping scheme (either standard or cisco)." + ::= { aprisaXEEthernetVlanQosSettings 4 } + +aprisaXEDefaultEthernetGrouping OBJECT-TYPE + SYNTAX AprisaXEDefaultAction + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Indicates when Ethernet Grouping settings must be reset to default values." + ::= { aprisaXEEthernetVlanQosSettings 5 } + +aprisaXEDefaultEthernetQos OBJECT-TYPE + SYNTAX AprisaXEDefaultAction + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Indicates when Ethernet Grouping settings must be reset to default values." + ::= { aprisaXEEthernetVlanQosSettings 6 } + + +-- *************************************************************************** +-- Dual E1 Alarms +-- *************************************************************************** + +aprisaXEDualJetBoardTable OBJECT-TYPE + SYNTAX SEQUENCE OF AprisaXEDualJetBoardEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "Table of Dual E1 card specific configuration details." + ::= { aprisaXEObjects 220 } + +aprisaXEDualJetBoardEntry OBJECT-TYPE + SYNTAX AprisaXEDualJetBoardEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "Dual E1 configuration details." + INDEX { aprisaXEDualJetBoardTableIndex } + ::= { aprisaXEDualJetBoardTable 1 } + +AprisaXEDualJetBoardEntry ::= SEQUENCE { + aprisaXEDualJetBoardTableIndex INTEGER + } + +aprisaXEDualJetBoardTableIndex OBJECT-TYPE + SYNTAX AprisaXESlotNumber + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Dual E1 board indexed by slot." + ::= { aprisaXEDualJetBoardEntry 1 } + +aprisaXEDualJetPortTable OBJECT-TYPE + SYNTAX SEQUENCE OF AprisaXEDualJetPortEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "Table based on slot and port of DualJet cards alarms." + ::= { aprisaXEObjects 221 } + +aprisaXEDualJetPortEntry OBJECT-TYPE + SYNTAX AprisaXEDualJetPortEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "Dual E1 port alarms." + INDEX { aprisaXEDualJetPortTableSlot, + aprisaXEDualJetPortTablePort + } + ::= { aprisaXEDualJetPortTable 1 } + +AprisaXEDualJetPortEntry ::= SEQUENCE { + aprisaXEDualJetPortTableSlot INTEGER, + aprisaXEDualJetPortTablePort INTEGER, + aprisaXEDualJetAISAlarmStatus INTEGER, + aprisaXEDualJetAISAlarmSeverity INTEGER, + aprisaXEDualJetAISAlarmEnabled INTEGER, + aprisaXEDualJetLOSAlarmStatus INTEGER, + aprisaXEDualJetLOSAlarmSeverity INTEGER, + aprisaXEDualJetLOSAlarmEnabled INTEGER + } + +aprisaXEDualJetPortTableSlot OBJECT-TYPE + SYNTAX AprisaXESlotNumber + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Port table index based on slot number." + ::= { aprisaXEDualJetPortEntry 1 } + +aprisaXEDualJetPortTablePort OBJECT-TYPE + SYNTAX AprisaXEPortNumber + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Port table index based on port number." + ::= { aprisaXEDualJetPortEntry 2 } + +aprisaXEDualJetAISAlarmStatus OBJECT-TYPE + SYNTAX FourRFAlarmStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION "AIS alarm status." + ::= { aprisaXEDualJetPortEntry 3 } + +aprisaXEDualJetAISAlarmSeverity OBJECT-TYPE + SYNTAX FourRFAlarmSeverity + MAX-ACCESS read-only + STATUS current + DESCRIPTION "AIS alarm severity." + ::= { aprisaXEDualJetPortEntry 4 } + +aprisaXEDualJetAISAlarmEnabled OBJECT-TYPE + SYNTAX FourRFAlarmEnabled + MAX-ACCESS read-only + STATUS current + DESCRIPTION "AIS alarm enabled or disabled." + ::= { aprisaXEDualJetPortEntry 5 } + +aprisaXEDualJetLOSAlarmStatus OBJECT-TYPE + SYNTAX FourRFAlarmStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION "LOS alarm status." + ::= { aprisaXEDualJetPortEntry 6 } + +aprisaXEDualJetLOSAlarmSeverity OBJECT-TYPE + SYNTAX FourRFAlarmSeverity + MAX-ACCESS read-only + STATUS current + DESCRIPTION "LOS alarm severity." + ::= { aprisaXEDualJetPortEntry 7 } + +aprisaXEDualJetLOSAlarmEnabled OBJECT-TYPE + SYNTAX FourRFAlarmEnabled + MAX-ACCESS read-only + STATUS current + DESCRIPTION "LOS alarm enabled or disabled." + ::= { aprisaXEDualJetPortEntry 8 } + +aprisaXEDualJetIFConfigTable OBJECT-TYPE + SYNTAX SEQUENCE OF AprisaXEDualJetIFConfigEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "Switch data table which describes the + allocation of user data on to the TDM busses." + ::= { aprisaXEObjects 222 } + +aprisaXEDualJetIFConfigEntry OBJECT-TYPE + SYNTAX AprisaXEDualJetIFConfigEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "Dual JET config data." + INDEX { aprisaXEDualJetIFConfigSlotIndex, + aprisaXEDualJetIFConfigPortIndex + } + ::= { aprisaXEDualJetIFConfigTable 1 } + +AprisaXEDualJetIFConfigEntry ::= SEQUENCE { + aprisaXEDualJetIFConfigSlotIndex INTEGER, + aprisaXEDualJetIFConfigPortIndex INTEGER, + aprisaXEDualJetTrafficType INTEGER, + aprisaXEDualJetLoopback INTEGER, + aprisaXEDualJetLineEncoding INTEGER, + aprisaXEDualJetPcmMode INTEGER, + aprisaXEDualJetClockSource INTEGER, + aprisaXEDualJetLineRadioLoopback INTEGER, + aprisaXEDualJetTxWaveFormShaper INTEGER + } + +aprisaXEDualJetIFConfigSlotIndex OBJECT-TYPE + SYNTAX AprisaXESlotNumber + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Index to the port table based on port number." + ::= { aprisaXEDualJetIFConfigEntry 1 } + +aprisaXEDualJetIFConfigPortIndex OBJECT-TYPE + SYNTAX AprisaXEPortNumber + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Index to the port table based on port number." + ::= { aprisaXEDualJetIFConfigEntry 2 } + +aprisaXEDualJetTrafficType OBJECT-TYPE + SYNTAX AprisaXEQuadJetTrafficType + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Controls the traffic type on a Dual JET port." + ::= { aprisaXEDualJetIFConfigEntry 3 } + +aprisaXEDualJetLoopback OBJECT-TYPE + SYNTAX FourRFLoopback + MAX-ACCESS read-write + STATUS obsolete + DESCRIPTION "Controls the traffic loopback on a Dual JET port." + ::= { aprisaXEDualJetIFConfigEntry 4 } + +aprisaXEDualJetLineEncoding OBJECT-TYPE + SYNTAX AprisaXEQuadJetLineEncoding + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Controls the line encoding, the default is + HDB3 for E1, B8ZS for T1." + ::= { aprisaXEDualJetIFConfigEntry 5 } + +aprisaXEDualJetPcmMode OBJECT-TYPE + SYNTAX AprisaXEPcmMode + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Controls the PCM mode, PCM31 or PCM30C." + ::= { aprisaXEDualJetIFConfigEntry 6 } + +aprisaXEDualJetClockSource OBJECT-TYPE + SYNTAX FourRFNetworkClockSelect + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Controls whether the port drives the clock soure or not." + ::= { aprisaXEDualJetIFConfigEntry 7 } + +aprisaXEDualJetLineRadioLoopback OBJECT-TYPE + SYNTAX AprisaXEQuadJetLoopbacks + MAX-ACCESS read-write + STATUS current + DESCRIPTION "This indicates the E1 loopback setting on a port; + OFF, Line or Radio Facing." + ::= { aprisaXEDualJetIFConfigEntry 8 } + +aprisaXEDualJetTxWaveFormShaper OBJECT-TYPE + SYNTAX AprisaXEQuadJetWaveFormShapers + MAX-ACCESS read-write + STATUS current + DESCRIPTION "This indicates the T1 Tx Waveform Shaper for a port; + 0~133 ft, 133~266 ft, 266~399 ft, 399~533 ft, 533~655 ft." + ::= { aprisaXEDualJetIFConfigEntry 9 } + + +-- *************************************************************************** +-- End Dual JET +-- *************************************************************************** + + +-- *************************************************************************** +-- Single E1 Alarms +-- *************************************************************************** + +aprisaXESingleJetBoardTable OBJECT-TYPE + SYNTAX SEQUENCE OF AprisaXESingleJetBoardEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "Table of Single E1 card specific configuration details." + ::= { aprisaXEObjects 225 } + +aprisaXESingleJetBoardEntry OBJECT-TYPE + SYNTAX AprisaXESingleJetBoardEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "Single E1 configuration details." + INDEX { aprisaXESingleJetBoardTableIndex } + ::= { aprisaXESingleJetBoardTable 1 } + +AprisaXESingleJetBoardEntry ::= SEQUENCE { + aprisaXESingleJetBoardTableIndex INTEGER + } + +aprisaXESingleJetBoardTableIndex OBJECT-TYPE + SYNTAX AprisaXESlotNumber + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Single E1 board indexed by slot." + ::= { aprisaXESingleJetBoardEntry 1 } + +aprisaXESingleJetPortTable OBJECT-TYPE + SYNTAX SEQUENCE OF AprisaXESingleJetPortEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "Table based on slot and port of SingleJet cards alarms." + ::= { aprisaXEObjects 226 } + +aprisaXESingleJetPortEntry OBJECT-TYPE + SYNTAX AprisaXESingleJetPortEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "Single E1 port alarms." + INDEX { aprisaXESingleJetPortTableSlot, + aprisaXESingleJetPortTablePort + } + ::= { aprisaXESingleJetPortTable 1 } + +AprisaXESingleJetPortEntry ::= SEQUENCE { + aprisaXESingleJetPortTableSlot INTEGER, + aprisaXESingleJetPortTablePort INTEGER, + aprisaXESingleJetAISAlarmStatus INTEGER, + aprisaXESingleJetAISAlarmSeverity INTEGER, + aprisaXESingleJetAISAlarmEnabled INTEGER, + aprisaXESingleJetLOSAlarmStatus INTEGER, + aprisaXESingleJetLOSAlarmSeverity INTEGER, + aprisaXESingleJetLOSAlarmEnabled INTEGER + } + +aprisaXESingleJetPortTableSlot OBJECT-TYPE + SYNTAX AprisaXESlotNumber + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Port table index based on slot number." + ::= { aprisaXESingleJetPortEntry 1 } + +aprisaXESingleJetPortTablePort OBJECT-TYPE + SYNTAX AprisaXEPortNumber + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Port table index based on port number." + ::= { aprisaXESingleJetPortEntry 2 } + +aprisaXESingleJetAISAlarmStatus OBJECT-TYPE + SYNTAX FourRFAlarmStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION "AIS alarm status." + ::= { aprisaXESingleJetPortEntry 3 } + +aprisaXESingleJetAISAlarmSeverity OBJECT-TYPE + SYNTAX FourRFAlarmSeverity + MAX-ACCESS read-only + STATUS current + DESCRIPTION "AIS alarm severity." + ::= { aprisaXESingleJetPortEntry 4 } + +aprisaXESingleJetAISAlarmEnabled OBJECT-TYPE + SYNTAX FourRFAlarmEnabled + MAX-ACCESS read-only + STATUS current + DESCRIPTION "AIS alarm enabled or disabled." + ::= { aprisaXESingleJetPortEntry 5 } + +aprisaXESingleJetLOSAlarmStatus OBJECT-TYPE + SYNTAX FourRFAlarmStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION "LOS alarm status." + ::= { aprisaXESingleJetPortEntry 6 } + +aprisaXESingleJetLOSAlarmSeverity OBJECT-TYPE + SYNTAX FourRFAlarmSeverity + MAX-ACCESS read-only + STATUS current + DESCRIPTION "LOS alarm severity." + ::= { aprisaXESingleJetPortEntry 7 } + +aprisaXESingleJetLOSAlarmEnabled OBJECT-TYPE + SYNTAX FourRFAlarmEnabled + MAX-ACCESS read-only + STATUS current + DESCRIPTION "LOS alarm enabled or disabled." + ::= { aprisaXESingleJetPortEntry 8 } + +aprisaXESingleJetIFConfigTable OBJECT-TYPE + SYNTAX SEQUENCE OF AprisaXESingleJetIFConfigEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "Switch data table which describes the + allocation of user data on to the TDM busses." + ::= { aprisaXEObjects 227 } + +aprisaXESingleJetIFConfigEntry OBJECT-TYPE + SYNTAX AprisaXESingleJetIFConfigEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "Single JET config data." + INDEX { aprisaXESingleJetIFConfigSlotIndex, + aprisaXESingleJetIFConfigPortIndex + } + ::= { aprisaXESingleJetIFConfigTable 1 } + +AprisaXESingleJetIFConfigEntry ::= SEQUENCE { + aprisaXESingleJetIFConfigSlotIndex INTEGER, + aprisaXESingleJetIFConfigPortIndex INTEGER, + aprisaXESingleJetTrafficType INTEGER, + aprisaXESingleJetLoopback INTEGER, + aprisaXESingleJetLineEncoding INTEGER, + aprisaXESingleJetPcmMode INTEGER, + aprisaXESingleJetClockSource INTEGER, + aprisaXESingleJetLineRadioLoopback INTEGER, + aprisaXESingleJetTxWaveFormShaper INTEGER + } + +aprisaXESingleJetIFConfigSlotIndex OBJECT-TYPE + SYNTAX AprisaXESlotNumber + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Index to the port table based on port number." + ::= { aprisaXESingleJetIFConfigEntry 1 } + +aprisaXESingleJetIFConfigPortIndex OBJECT-TYPE + SYNTAX AprisaXEPortNumber + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Index to the port table based on port number." + ::= { aprisaXESingleJetIFConfigEntry 2 } + +aprisaXESingleJetTrafficType OBJECT-TYPE + SYNTAX AprisaXEQuadJetTrafficType + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Controls the traffic type on a Single JET port." + ::= { aprisaXESingleJetIFConfigEntry 3 } + +aprisaXESingleJetLoopback OBJECT-TYPE + SYNTAX FourRFLoopback + MAX-ACCESS read-write + STATUS obsolete + DESCRIPTION "Controls the traffic loopback on a Single JET port." + ::= { aprisaXESingleJetIFConfigEntry 4 } + +aprisaXESingleJetLineEncoding OBJECT-TYPE + SYNTAX AprisaXEQuadJetLineEncoding + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Controls the line encoding, the default is + HDB3 for E1, B8ZS for T1." + ::= { aprisaXESingleJetIFConfigEntry 5 } + +aprisaXESingleJetPcmMode OBJECT-TYPE + SYNTAX AprisaXEPcmMode + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Controls the PCM mode, PCM31 or PCM30C." + ::= { aprisaXESingleJetIFConfigEntry 6 } + +aprisaXESingleJetClockSource OBJECT-TYPE + SYNTAX FourRFNetworkClockSelect + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Controls whether the port drives the clock soure or not." + ::= { aprisaXESingleJetIFConfigEntry 7 } + +aprisaXESingleJetLineRadioLoopback OBJECT-TYPE + SYNTAX AprisaXEQuadJetLoopbacks + MAX-ACCESS read-write + STATUS current + DESCRIPTION "This indicates the E1 loopback setting on a port; + OFF, Line or Radio Facing." + ::= { aprisaXESingleJetIFConfigEntry 8 } + +aprisaXESingleJetTxWaveFormShaper OBJECT-TYPE + SYNTAX AprisaXEQuadJetWaveFormShapers + MAX-ACCESS read-write + STATUS current + DESCRIPTION "This indicates the T1 Tx Waveform Shaper for a port; + 0~133 ft, 133~266 ft, 266~399 ft, 399~533 ft, 533~655 ft." + ::= { aprisaXESingleJetIFConfigEntry 9 } + + +-- *************************************************************************** +-- End Single JET +-- *************************************************************************** + + + +-- *************************************************************************** +-- PSC +-- *************************************************************************** + +aprisaXEPSCControlTable OBJECT-TYPE + SYNTAX SEQUENCE OF AprisaXEPSCControlTableEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "Control table for PSC." + ::= { aprisaXEObjects 230 } + +aprisaXEPSCControlTableEntry OBJECT-TYPE + SYNTAX AprisaXEPSCControlTableEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "Entries for PSC table." + INDEX { aprisaXEPSCControlSlotIndex } + ::= { aprisaXEPSCControlTable 1 } + +AprisaXEPSCControlTableEntry ::= SEQUENCE { + aprisaXEPSCControlSlotIndex INTEGER, + aprisaXEPSCActiveRadio AprisaXEPSCActiveRadio, + aprisaXEPSCActiveTx AprisaXEPSCActiveTx, + aprisaXEPSCDemodAligmentStatusPSC FourRFAlarmStatus, + aprisaXEPSCDemodAligmentStatusPIC FourRFAlarmStatus + } + +aprisaXEPSCControlSlotIndex OBJECT-TYPE + SYNTAX AprisaXESlotNumber + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Slot index for PSC Control Table." + ::= { aprisaXEPSCControlTableEntry 1 } + +aprisaXEPSCActiveRadio OBJECT-TYPE + SYNTAX AprisaXEPSCActiveRadio + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Indicates the reception mode of the PSC." + ::= { aprisaXEPSCControlTableEntry 2 } + +aprisaXEPSCActiveTx OBJECT-TYPE + SYNTAX AprisaXEPSCActiveTx + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Indicates the currently active transmitter." + ::= { aprisaXEPSCControlTableEntry 3 } + +aprisaXEPSCDemodAlignmentStatusPSC OBJECT-TYPE + SYNTAX FourRFAlarmStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Status of the demodulator alignment on the PSC." + ::= { aprisaXEPSCControlTableEntry 4 } + +aprisaXEPSCDemodAlignmentStatusPIC OBJECT-TYPE + SYNTAX FourRFAlarmStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Status of the demodulator alignment on the PIC." + ::= { aprisaXEPSCControlTableEntry 5 } + +-- *************************************************************************** +-- End PSC +-- *************************************************************************** + + +-- *************************************************************************** +-- HSD Parameter Comparison +-- *************************************************************************** + +aprisaXEHSDParameterCompare OBJECT IDENTIFIER ::= { aprisaXEObjects 235 } + +aprisaXEHSDParameterMismatch OBJECT-TYPE + SYNTAX FourRFAlarmStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION "If there is a parameter (OID) mismatch between + Radio A and Radio B" + ::= { aprisaXEHSDParameterCompare 1 } + +aprisaXEHSDParameterCompareChecking OBJECT-TYPE + SYNTAX INTEGER { off (0), + on (1) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Enables/disables HSD paramter compare checking between + Radio A and Radio B" + ::= { aprisaXEHSDParameterCompare 2 } + +aprisaXEHSDParameterCompareGroup OBJECT-GROUP + OBJECTS { aprisaXEHSDParameterMismatch, + aprisaXEHSDParameterCompareChecking + } + STATUS current + DESCRIPTION "The AprisaXE HSD Parameter Comparison group." + ::= { aprisaXEGroups 305 } + +-- *************************************************************************** +-- HSD Parameter Comparison +-- *************************************************************************** + + +END diff --git a/MIBS/4rf/4RF-APRISAXE-TC b/MIBS/4rf/4RF-APRISAXE-TC new file mode 100644 index 0000000..68d7f9b --- /dev/null +++ b/MIBS/4rf/4RF-APRISAXE-TC @@ -0,0 +1,1116 @@ +APRISAXE-TC-4RF DEFINITIONS ::= BEGIN + +-- +-- File: $Id: 4RF-APRISAXE-TC.txt,v 1.111 2007/08/01 04:52:02 ma Exp $ +-- +-- Copyright: 2004 4RF COMMUNICATIONS LTD +-- +-- Description: +-- Textual Conventions for AprisaXE project. +-- +-- Versions: +-- +-- Release 3 +-- Added support for 4-wire cards and configurable cross-connections +-- +-- Notes: +-- None +-- + + +IMPORTS + + -- Standard imports + MODULE-IDENTITY, OBJECT-TYPE, OBJECT-IDENTITY, NOTIFICATION-TYPE, + Integer32, Unsigned32, Counter32, IpAddress + FROM SNMPv2-SMI + TEXTUAL-CONVENTION, DisplayString + FROM SNMPv2-TC + MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP + FROM SNMPv2-CONF + + -- 4RF Specific imports + fourRFModules + FROM MIB-4RF; + + +-- Module Identification +fourRFAprisaXETCModule MODULE-IDENTITY + LAST-UPDATED "200704300000Z" + ORGANIZATION "www.4rf.com" + CONTACT-INFO + "postal: 4RF Communications Ltd + 26 Glover Street + Ngauranga + PO Box 13-506 + Wellington 6032 + New Zealand + + phone: +64 4 499 6000 + email: support@4rf.com" + DESCRIPTION "Textual Conventions for the AprisaXE project" + + -- Revision history + -- (in reverse chronological order) + + REVISION "200704300000Z" + DESCRIPTION "Second draft" + + REVISION "200412030152Z" + DESCRIPTION "First draft" + ::= { fourRFModules 6 } + + +AprisaXESlotNumber ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION "Represents a slot number in the AprisaXE, the slots include + the modem, transmitter and receiver as well as the MUX cards. + H/W Slot Card Slot Name + 0 Aux/Modem Aux + 1 MUX Card H + 2 MUX Card G + 3 MUX Card F + 4 MUX Card E + 5 MUX Card D + 6 MUX Card C + 7 MUX Card B + 8 MUX Card A + 9 Transmitter Transmitter + 10 Receiver Receiver + Slots may or may not be populated." + SYNTAX INTEGER { rxSlot (0), + txSlot (1), + + -- MUX card slots + slotA (2), + slotB (3), + slotC (4), + slotD (5), + slotE (6), + slotF (7), + slotG (8), + slotH (9), + + -- Modem + auxSlot (10), + + noSlot (255) + } + +AprisaXEHardwareVersion ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION "Represents a single byte hardware version number." + SYNTAX INTEGER ( 0..255 ) + +AprisaXECardType ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION "This is used to identify the type of MUX card in a slot. + The values for the enumerations match the hardware type + values returned from the MUX card FPGAs and EEPROMs." + SYNTAX INTEGER { none (0), -- No card present + motherboard ('E0'h), + transmitterCard ('E3'h), + receiverCard ('E4'h), + quadJETCard ('E5'h), + quadFourWireCard ('E7'h), + dualFXOCard ('E8'h), + dualFXSCard ('E9'h), + modemCard ('EA'h), + quadV24Card ('EB'h), + hssCard ('EC'h), + pscCard ('ED'h), + picCard ('EE'h), + dualJETCard ('D5'h), + singleJETCard ('C5'h) + } + +AprisaXEAlarmSource ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION "This is used to identify the source of an alarm." + SYNTAX INTEGER { none (0), + + -- Card level alarms + modem (1), + transmitter (2), + receiver (3), + quadJET (4), + quadFourWire (5), + dualFxo (6), + dualFxs (7), + quadV24 (8), + highSpeedSync (9), + psc (10), + pic (11), + dualJET (12), + singleJET (13), + + -- External alarms + external1 (50), + external2 (51), + + -- Remote alarms + remote (60), + + -- User specified + user1 (70), + user2 (71), + + -- System level alarms, e.g. card mismatch, s/w upgrade + system (100), + swUpgrade (101) + } + +AprisaXEPortNumber ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION "This is used to identify a port e.g. reporting an alarm. + Not all alarms are associated with a port, in these cases + noPort will be used." + SYNTAX INTEGER { noPort (0), + -- We have up to four ports per MUX card + portOne (1), + portTwo (2), + portThree (3), + portFour (4) + } + +AprisaXEAlarmOutput ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION "This is used to map alarm to external outputs." + SYNTAX INTEGER { none (0), + -- Map to external outputs + externalOutput1 (1), + externalOutput2 (2), + externalOutput3 (3), + externalOutput4 (4) + } + +AprisaXEAlarmMapping ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION "This is used to map alarm to external outputs." + SYNTAX INTEGER { none (0), + localMajor (1), + localMinor (2), + remoteMajor (3), + remoteMinor (4), + remoteInput1 (5), + remoteInput2 (6) + } + +AprisaXEAlarmPolarity ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION "This is used to indicate the polarity indicating an alarm + present on the external outputs." + SYNTAX INTEGER { polarityLow (0), + polarityHigh (1) + } + +AprisaXEAdcVoltage ::= TEXTUAL-CONVENTION + DISPLAY-HINT "d-3" + STATUS current + DESCRIPTION "A voltage read from an ADC, in millivolts." + SYNTAX Integer32 + + +AprisaXEDbValue ::= TEXTUAL-CONVENTION + DISPLAY-HINT "d-1" + STATUS current + DESCRIPTION "A value displayed in dB's." + SYNTAX Integer32 + + +AprisaXEIQData ::= TEXTUAL-CONVENTION + DISPLAY-HINT "2x:" + STATUS current + DESCRIPTION "A sequence of IQ data pairs, each individual value is 16 bit + thus a single IQ pair is 32 bits." + SYNTAX OCTET STRING ( SIZE (0..200) ) + +AprisaXEAlarmType ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION "The type of an alarm." + SYNTAX INTEGER { none (0), + + -- Transmitter Alarms + txADCChZeroHi (1), -- ADC zero high threshold has been passed + txADCChZeroLo (2), -- ADC zero low threshold has been passed + txADCChOneHi (3), -- ADC one high threshold has been passed + txADCChOneLo (4), -- ADC one low threshold has been passed + txADCChTwoHi (5), -- ADC two high threshold has been passed + txADCChTwoLo (6), -- ADC two low threshold has been passed + txADCChThreeHi (7), -- ADC three high threshold has been passed + txADCChThreeLo (8), -- ADC three low threshold has been passed + txADCChFourHi (9), -- ADC four high threshold has been passed + txADCChFourLo (10), -- ADC four low threshold has been passed + txADCChFiveHi (11), -- ADC five high threshold has been passed + txADCChFiveLo (12), -- ADC five low threshold has been passed + txADCChSixHi (13), -- ADC six high threshold has been passed + txADCChSixLo (14), -- ADC six low threshold has been passed + txADCChSevenHi (15), -- ADC seven high threshold has been passed + txADCChSevenLo (16), -- ADC seven low threshold has been passed + txADCChEightHi (17), -- ADC eight high threshold has been passed + txADCChEightLo (18), -- ADC eight low threshold has been passed + txADCChNineHi (19), -- ADC nine high threshold has been passed + txADCCNineLo (20), -- ADC nine low threshold has been passed + txADCChTenHi (21), -- ADC ten high threshold has been passed + txADCChTenLo (22), -- ADC ten low threshold has been passed + txADCChElevenHi (23), -- ADC eleven high threshold has been passed + txADCChElevenLo (24), -- ADC eleven low threshold has been passed + txSynthLD (25), -- Synth is not locked + tx5VFail (26), -- 5V supply has failed + tx11VFail (27), -- 11V supply is off/has failed + tx28VFail (28), -- 28V supply has failed + txEEFail (29), -- EEPROM contents are corrupt + txTSensorFail (30), -- Temperature sensor has failed + txReturnLoss (31), -- Return loss is too high + txAmplifierBalance (32), -- One side of amplifier has failed + txMibFail (33), -- MIB is are corrupt in EEPROM + + -- Receiver Alarms + rxADCChZeroHi (50), -- ADC zero high threshold has been passed + rxADCChZeroLo (51), -- ADC zero low threshold has been passed + rxADCChOneHi (52), -- ADC one high threshold has been passed + rxADCChOneLo (53), -- ADC one low threshold has been passed + rxADCChTwoHi (54), -- ADC two high threshold has been passed + rxADCChTwoLo (55), -- ADC two low threshold has been passed + rxADCChThreeHi (56), -- ADC three high threshold has been passed + rxADCChThreeLo (57), -- ADC three low threshold has been passed + rxADCChFourHi (58), -- ADC four high threshold has been passed + rxADCChFourLo (59), -- ADC four low threshold has been passed + rxADCChFiveHi (60), -- ADC five high threshold has been passed + rxADCChFiveLo (61), -- ADC five low threshold has been passed + rxADCChSixHi (62), -- ADC six high threshold has been passed + rxADCChSixLo (63), -- ADC six low threshold has been passed + rxADCChSevenHi (64), -- ADC seven high threshold has been passed + rxADCChSevenLo (65), -- ADC seven low threshold has been passed + rxADCChEightHi (66), -- ADC eight high threshold has been passed + rxADCChEightLo (67), -- ADC eight low threshold has been passed + rxADCChNineHi (68), -- ADC nine high threshold has been passed + rxADCCNineLo (69), -- ADC nine low threshold has been passed + rxADCChTenHi (70), -- ADC ten high threshold has been passed + rxADCChTenLo (71), -- ADC ten low threshold has been passed + rxRSSIHi (72), + rxRSSILo (73), + rx12VFail (74), + rxSynthLD (75), + rxEEFail (76), + rxOff (77), + rxMibFail (78), -- MIB is are corrupt in EEPROM + + --Modem Alarms + mdLOS (100), + mdLink (101), + mdStatus (102), + mdDemodAlignmentLost (103), + mdTdmAlignmentLost (104), + mdRefAFail (105), + mdRefBFail (106), + mdClkSyncFail (107), + mdNetClkConfig (108), + mdUCEPresent (109), + mdInitFail (110), + mdEEFail (120), + + --General Mux alarms + muxId (150), + muxInit (151), + muxStat (152), + muxClk (153), + muxMibEEFail (154), + muxCharEEFail (155), + + --E1/T1 Mux Alarms + e1LOF (200), -- Loss of frame + e1AIS (201), + e1RAI (202), + e1RMAI (203), + e1TS16AIS (204), + e1TS16LOS (205), + e1LOS (206), + e1CRC4 (207), + t1LOF (220), -- Loss of frame + t1AIS (221), + t1RAI (222), + t1LOS (226), + t1CRC6 (227), + + --motherboard alarms + mbHwHsc (250), -- Unsupported hardware version was detected + mbFan1Fail (251), -- Fan 1 has failed + mbFan2Fail (252), -- Fan 2 has failed + mbInvalidConfig (253), + mbCardMismatch (254), -- Expected and actual installed MUX card mismatch + mbEEFail (255), -- General EEPROM configuration problem + + --cross connect alarms + ccDataFail (300), -- Cross-connection data is invalid + ccNoBandwidth (301), -- Insufficient bandwidth for specified cross-connects + + --mhsb alarms + mhsbSwitchToStandby (325), + + -- External alarms + externalAlarm1 (350), -- External Input alarm 1 is present + externalAlarm2 (351), -- External Input alarm 2 is present + externalOutputAlarm1 (352), -- An alarm is active on External Output 1 + externalOutputAlarm2 (353), -- An alarm is active on External Output 2 + externalOutputAlarm3 (354), -- An alarm is active on External Output 3 + externalOutputAlarm4 (355), -- An alarm is active on External Output 4 + + -- Remote Alarms + remoteMajorAlarm (400), -- A major alarm is present on the remote terminal + remoteMinorAlarm (401), -- A minor alarm is present on the remote terminal + + --FXO alarms + fxoCodecOvld (402), + fxoBillToneOvld (403), + fxoUnplug (404), + fxoCurrentOvld (405), + + --FXS ALARMS + fxsCalibError (406), + fxsDCDCError (407), + fxsCASLock (408), + + -- HSS Alarms + hssTdmLock (500), + hss32MhzReset (501), + hssTdmReset (502), + hssLoss (503), + hssRxFifoFull (504), + hssRxFifoEmpty (505), + hssTxFifoFull (506), + hssTxFifoEmpty (507), + hssRxClockInvalid (508), + hssTxClockInvalid (509), + + -- V24 Alarms + v24CtrlLineLoss (525), + + --Generic Alarms + altImageTableUsed (550), + defaultImageTableUsed (551), + uploadFail (552), + + -- PSC Alarms + pscDemuxAlignmentLost (575), + pscTDMAlignmentLost (576), + pscMuxAlignmentError (577), + pscCompanionTxFail (578), + pscSoftwareOverride (579), + pscInvalidSwitchValue (580), + + -- HSD Alarms + hsdParamMismatch (600), + hsdCompanionLost (601), + hsdPMTxFreq (602), + hsdPMRxFreq (603), + hsdPMTermModState (604), + hsdPMTermRfChWidth (605), + hsdPMTxPower (606), + hsdPMModemIntlvEna (607), + + -- Used to check alarm ranges + lastAlarm (608) + } + +AprisaXEChannelControlType ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION "This is used to set the control the channels, enabling and + disabling E1/T1 ports." + SYNTAX INTEGER { off (0), + on (1) + } + +AprisaXETdmPortType ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION "This is used to set the port out to the TDM bus." + SYNTAX INTEGER { tdmAo (0), + tdmBo (1), + tdmCo (2), + tdmDo (3), + tdmAi (4), + tdmBi (5), + tdmCi (6), + tdmDi (7) + } + +AprisaXETdmBus ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION "This is used to set the TDM bus to use." + SYNTAX INTEGER { tdmBusA (0), + tdmBusB (1), + tdmBusC (2), + tdmBusD (3) + } + +AprisaXEQuadJetTrafficType ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION "This is used to set the traffic rate for the Quad JET card." + SYNTAX INTEGER { e1Traffic (0), + t1Traffic (1), + j1Traffic (2) + } + +AprisaXEQuadJetLineEncoding ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION "This is used to set the line encoding for the Quad JET card the + default is HDB3 for E1 and B8ZS for T1." + SYNTAX INTEGER { defaultLineEncoding (0), + hDB3LineEncoding (2), + b8ZSLineEncoding (4), + amiLineEncoding (1) + } + +AprisaXEQuadJetWaveFormShapers ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION "This is used to set the T1 Tx Waveform Shaper for a port; + The default value is 0~133 ft." + SYNTAX INTEGER { wfs0To133Ft (2), + wfs133To266Ft (3), + wfs266To399Ft (4), + wfs399To533Ft (5), + wfs533To655Ft (6) + } + +AprisaXEQuadJetMultiframeEnable ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION "This is used to enable/disable support for transport of T1 SF + and ESF multiframe sync for a port." + SYNTAX INTEGER { t1MFOff (0), + t1MFOn (1) + } + +AprisaXEDataStatus ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION "This indicates the state of receiver, transmitter or MUX card + MIB orcharacterisation data." + SYNTAX INTEGER { invalid (0), + valid (1) + } + +AprisaXEAdpcmCompression ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION "This defines the Compression available on ADPCM." + SYNTAX INTEGER { kbits16 (0), + kbits24 (1), + kbits32 (2), + kbits64 (3), + kbits0 (4) + } + +AprisaXESignalState ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION "This indicates the state of CAS signalling." + SYNTAX INTEGER { normal (0), + invert (1) + } + +AprisaXEPcmLaw ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION "Type of PCM encoding available." + SYNTAX INTEGER { alaw (0), + ulaw (1) + } + +AprisaXE4WRxGain ::= TEXTUAL-CONVENTION + STATUS obsolete + DESCRIPTION "The gain in half dB steps for 4wire mux cards." + SYNTAX INTEGER { dbpos40 (0), + dbpos35 (1), + dbpos30 (2), + dbpos25 (3), + dbpos20 (4), + dbpos15 (5), + dbpos10 (6), + dbpos05 (7), + dbpos0 (8), + dbneg05 (9), + dbneg10 (10), + dbneg15 (11), + dbneg20 (12), + dbneg25 (13), + dbneg30 (14), + dbneg35 (15), + dbneg40 (16), + dbneg45 (17), + dbneg50 (18), + dbneg55 (19), + dbneg60 (20), + dbneg65 (21), + dbneg70 (22), + dbneg75 (23), + dbneg80 (24), + dbneg85 (25), + dbneg90 (26), + dbneg95 (27), + dbneg100 (28), + dbneg105 (29), + dbneg110 (30), + dbneg115 (31), + dbneg120 (32), + dbneg125 (33), + dbneg130 (34), + dbneg135 (35), + dbneg140 (36) + } + +AprisaXE4WTxGain ::= TEXTUAL-CONVENTION + STATUS obsolete + DESCRIPTION "The gain in half dB steps for 4wire mux cards." + SYNTAX INTEGER { pos140 (0), + pos135 (1), + pos130 (2), + pos125 (3), + pos120 (4), + pos115 (5), + pos110 (6), + pos105 (7), + pos100 (8), + pos95 (9), + pos90 (10), + pos85 (11), + pos80 (12), + pos75 (13), + pos70 (14), + pos65 (15), + pos60 (16), + pos55 (17), + pos50 (18), + pos45 (19), + pos40 (20), + pos35 (21), + pos30 (22), + pos25 (23), + pos20 (24), + pos15 (25), + pos10 (26), + pos05 (27), + pos0 (28), + neg05 (29), + neg10 (30), + neg15 (31), + neg20 (32), + neg25 (33), + neg30 (34), + neg35 (35), + neg40 (36) + } + +AprisaXE4WInputLevel ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION "The input (A->D) level in half dB steps for the 4wire mux cards." + SYNTAX INTEGER { q4emadpos40 (36), + q4emadpos35 (35), + q4emadpos30 (34), + q4emadpos25 (33), + q4emadpos20 (32), + q4emadpos15 (31), + q4emadpos10 (30), + q4emadpos05 (29), + q4emadpos0 (28), + q4emadneg05 (27), + q4emadneg10 (26), + q4emadneg15 (25), + q4emadneg20 (24), + q4emadneg25 (23), + q4emadneg30 (22), + q4emadneg35 (21), + q4emadneg40 (20), + q4emadneg45 (19), + q4emadneg50 (18), + q4emadneg55 (17), + q4emadneg60 (16), + q4emadneg65 (15), + q4emadneg70 (14), + q4emadneg75 (13), + q4emadneg80 (12), + q4emadneg85 (11), + q4emadneg90 (10), + q4emadneg95 (9), + q4emadneg100 (8), + q4emadneg105 (7), + q4emadneg110 (6), + q4emadneg115 (5), + q4emadneg120 (4), + q4emadneg125 (3), + q4emadneg130 (2), + q4emadneg135 (1), + q4emadneg140 (0) + } + +AprisaXE4WOutputLevel ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION "The output (D->A) level in half dB steps for the 4wire mux cards." + SYNTAX INTEGER { q4emdapos40 (0), + q4emdapos35 (1), + q4emdapos30 (2), + q4emdapos25 (3), + q4emdapos20 (4), + q4emdapos15 (5), + q4emdapos10 (6), + q4emdapos05 (7), + q4emdapos0 (8), + q4emdaneg05 (9), + q4emdaneg10 (10), + q4emdaneg15 (11), + q4emdaneg20 (12), + q4emdaneg25 (13), + q4emdaneg30 (14), + q4emdaneg35 (15), + q4emdaneg40 (16), + q4emdaneg45 (17), + q4emdaneg50 (18), + q4emdaneg55 (19), + q4emdaneg60 (20), + q4emdaneg65 (21), + q4emdaneg70 (22), + q4emdaneg75 (23), + q4emdaneg80 (24), + q4emdaneg85 (25), + q4emdaneg90 (26), + q4emdaneg95 (27), + q4emdaneg100 (28), + q4emdaneg105 (29), + q4emdaneg110 (30), + q4emdaneg115 (31), + q4emdaneg120 (32), + q4emdaneg125 (33), + q4emdaneg130 (34), + q4emdaneg135 (35), + q4emdaneg140 (36) + } + +AprisaXEFXSInputLevel ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION "The output (A->D) level in half dB steps for the DFXS mux cards." + SYNTAX INTEGER { + -- dfxsadpos30 (25), + -- dfxsadpos25 (24), + dfxsadpos20 (23), + dfxsadpos15 (22), + dfxsadpos10 (21), + dfxsadpos05 (20), + dfxsadpos0 (19), + dfxsadneg05 (18), + dfxsadneg10 (17), + dfxsadneg15 (16), + dfxsadneg20 (15), + dfxsadneg25 (14), + dfxsadneg30 (13), + dfxsadneg35 (12), + dfxsadneg40 (11), + dfxsadneg45 (10), + dfxsadneg50 (9), + dfxsadneg55 (8), + dfxsadneg60 (7), + dfxsadneg65 (6), + dfxsadneg70 (5), + dfxsadneg75 (4), + dfxsadneg80 (3), + dfxsadneg85 (2), + dfxsadneg90 (1) + } + +AprisaXEFXSOutputLevel ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION "The output (D->A) level in half dB steps for the DFXS mux cards." + SYNTAX INTEGER { dfxsdapos25 (1), + dfxsdapos20 (2), + dfxsdapos15 (3), + dfxsdapos10 (4), + dfxsdapos05 (5), + dfxsdapos0 (6), + dfxsdaneg05 (7), + dfxsdaneg10 (8), + dfxsdaneg15 (9), + dfxsdaneg20 (10), + dfxsdaneg25 (11), + dfxsdaneg30 (12), + dfxsdaneg35 (13), + dfxsdaneg40 (14), + dfxsdaneg45 (15), + dfxsdaneg50 (16), + dfxsdaneg55 (17), + dfxsdaneg60 (18), + dfxsdaneg65 (19), + dfxsdaneg70 (20), + dfxsdaneg75 (21), + dfxsdaneg80 (22), + dfxsdaneg85 (23), + dfxsdaneg90 (24), + dfxsdaneg95 (25) + } + +AprisaXEFXOInputLevel ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION "The output (A->D) level in half dB steps for the DFXO mux cards." + SYNTAX INTEGER { dfxoadpos10 (22), + dfxoadpos05 (21), + dfxoadpos0 (20), + dfxoadneg05 (19), + dfxoadneg10 (18), + dfxoadneg15 (17), + dfxoadneg20 (16), + dfxoadneg25 (15), + dfxoadneg30 (14), + dfxoadneg35 (13), + dfxoadneg40 (12), + dfxoadneg45 (11), + dfxoadneg50 (10), + dfxoadneg55 (9), + dfxoadneg60 (8), + dfxoadneg65 (7), + dfxoadneg70 (6), + dfxoadneg75 (5), + dfxoadneg80 (4), + dfxoadneg85 (3), + dfxoadneg90 (2), + dfxoadneg95 (1), + dfxoadneg100 (0) + } + +AprisaXEFXOOutputLevel ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION "The output (D->A) level in half dB steps for the DFXO mux cards." + SYNTAX INTEGER { dfxodapos10 (18), + dfxodapos05 (19), + dfxodapos0 (20), + dfxodaneg05 (21), + dfxodaneg10 (22), + dfxodaneg15 (23), + dfxodaneg20 (24), + dfxodaneg25 (25), + dfxodaneg30 (26), + dfxodaneg35 (27), + dfxodaneg40 (28), + dfxodaneg45 (29), + dfxodaneg50 (30), + dfxodaneg55 (31), + dfxodaneg60 (32), + dfxodaneg65 (33), + dfxodaneg70 (34), + dfxodaneg75 (35), + dfxodaneg80 (36), + dfxodaneg85 (37), + dfxodaneg90 (38), + dfxodaneg95 (39), + dfxodaneg100 (40) + } + +AprisaXEFXOCountry ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION "The country code for FXO mux cards this will need to be completed later." + SYNTAX INTEGER { argentina (0), + australia (1), + austria (2), + bahrain (3), + belgium (4), + brazil (5), + bulgaria (6), + canada (7), + chile (8), + china (9), + columbia (10), + croatia (11), + cyprus (12), + czechrep (13), + denmark (14), + ecuador (15), + egypt (16), + elslavador (17), + finland (18), + france (19), + germany (20), + greece (21), + guam (22), + hongkong (23), + hungary (24), + iceland (25), + india (26), + indonesia (27), + ireland (28), + israel (29), + italy (30), + japan (31), + jordan (32), + kazakhstan (33), + kuwait (34), + latvia (35), + lebanon (36), + luxembourg (37), + macao (38), + malaysia (39), + malta (40), + mexico (41), + morocco (42), + netherlands (43), + newzealand (44), + nigeria (45), + norway (46), + oman (47), + pakistan (48), + peru (49), + philippines (50), + poland (51), + portugal (52), + romania (53), + russia (54), + saudiarabia (55), + singapore (56), + slovakia (57), + slovenia (58), + southafrica (59), + southkorea (60), + spain (61), + sweden (62), + switzerland (63), + syria (64), + taiwan (65), + tbr21 (66), + thailand (67), + uae (68), + uk (69), + usa (70), + yemen (71) + } + +AprisaXEFXSPMLevel ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION "Type of SPM level." + SYNTAX INTEGER { l0 (0), + l1 (1), + l2 (2), + l3 (3), + l4 (4), + l5 (5), + l6 (6), + l7 (7), + l8 (8), + l9 (9), + l10 (10), + l11 (11), + l12 (12), + l13 (13), + l14 (14), + l15 (15), + l16 (16), + l17 (17), + l18 (18), + l19 (19), + l20 (20), + l21 (21), + l22 (22), + l23 (23), + l24 (24), + l25 (25), + l26 (26), + l27 (27) + } + +AprisaXEFXSPathMute ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION "The status of the Path Mute function for the DFXS." + SYNTAX INTEGER { noMute (0), + muteRx (16), + muteTx (32) + } + +AprisaXETableCommand ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION "A command sent to add or delete table entries." + SYNTAX INTEGER { noCommand (0), + addCommand (1), + deleteCommand (2) + } + +AprisaXEQuadJetConnectionType ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION "Indicates whether a connection is for data or CAS signalling." + SYNTAX INTEGER { dataConnection (0), + casConnection (1), + tsLoopbackConnection (2) + } + +AprisaXEInterfaceCnxnType ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION "This describes the interface connection type. The + values are arbitrary and are primarily used to + identify instances of aggregate connections." + SYNTAX INTEGER { none(0), -- Unused connection + unframedE1Intf (1), + unframedT1Intf (2), + aggregateIntf (3), + fourWireIntf (4), + fxoIntf (5), + fxsIntf (6), + v24AsyncIntf (7), + custEthernetIntf (8), + mgmtEthernetIntf (9), + syncSerialIntf (10), + -- aggregateCasIntf (11), + hssControlIntf (12), + dropAndInsertIntf (13) + } + +AprisaXEConnectionID ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION "Represents a unique cross-connection identifier." + SYNTAX INTEGER ( 0..65535 ) + +AprisaXEPcmMode ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION "The current PCM mode." + SYNTAX INTEGER { pcm31c (0), + pcm30c (1), + pcm31 (2), + pcm30 (3), + unframed (4), + off (5), -- The port is off + t1sf (6), + t1esf (7), + t1sf4 (8), + t1esf16 (10) + } + +AprisaXESerialEquipmentMode ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION "Mode describing the behaviour of the serial interface." + SYNTAX INTEGER { noCable (0), + dceMode (1), + dteMode (2) + } + +AprisaXEHssSerialMode ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION "Mode describing the type of serial interface, e.g. V.35." + SYNTAX INTEGER { v11Mode (0), + rs530AMode (1), + rs530Mode (2), + x21Mode (3), + v35Mode (4), + rs449v36Mode (5), + rs232v28Mode (6), + noSerialCable (7) + } + +AprisaXE2WireSignalState ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION "This indicates the state of the CAS signalling bits + as normal, inverted and disabled." + SYNTAX INTEGER { fxTransNormal (0), + fxTransInvert (1), + fxForcedNormal (2), + fxForcedInvert (3) + } + +AprisaXEEthernetPortNumber ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION "Ethernet port numbers." + SYNTAX INTEGER { eth1 (1), + eth2 (2), + eth3 (3), + eth4 (4) + } + +AprisaXEEthernetGroup ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION "Used for Ethernet groupings." + SYNTAX INTEGER { user1 (1), + user2 (2), + user3 (3), + user4 (4), + userAndMgmt (5) + } + +AprisaXEEthernetFrameRate ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION "The frame rate limits allowed by the Marvell switch." + SYNTAX INTEGER { unlimited (0), + limit128kbps (1), + limit256kbps (2), + limit512kbps (3), + limit1Mbps (4), + limit2Mbps (5), + limit4Mbps (6), + limit8Mbps (7) + } + +AprisaXEEthernetPortPriority ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION "Indicates the bandwidth allocated to a port." + SYNTAX INTEGER { fromFrame (0), + low (1), + medium (3), + high (5), + vHigh (7) + } + +AprisaXEEthernetGrouping ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION "Indicates whether Ethernet Grouping is enabled or disabled." + SYNTAX INTEGER { ethGroupDisabled (0), + ethGroupEnabled (1) + } + +AprisaXEEthernetPrioQueueScheduling ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION "Indicates the QOS priority scheduling scheme." + SYNTAX INTEGER { weighted (0), + strict (1) + } + +AprisaXEEthernetPrioQueueMapping ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION "Indicates the QOS priority mapping scheme." + SYNTAX INTEGER { standard (0), + cisco (1) + } + +AprisaXEDefaultAction ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION "Indicates whether, or not, MIB values should be defaulted." + SYNTAX INTEGER { dontSetToDefaults (0), + setToDefaults (1) + } + +AprisaXEQuadJetLoopbacks ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION "This indicates the E1 loopback setting on a port; + OFF, Line or Radio Facing." + SYNTAX INTEGER { e1LoopbacksOff (0), + e1LineLoopbackOn (1), + e1RadioLoopbackOn (2) + } + +AprisaXECCActivationStatus ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION "Indicates the current state of cross connect + activation for the port." + SYNTAX INTEGER { ccActivated (0), + ccActivationFailed (1), + ccBusyActivating (2) + } + +AprisaXESysSoftwareStatus ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION "Indicates consistency of inventory file and system software." + SYNTAX INTEGER { sysInventoryConsistent (0), + sysInventoryInconsistent (1) + } + +AprisaXEPSCActiveRadio ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION "This indicates the active radio for the PSC card." + SYNTAX INTEGER { autoSelect (1), + manualA (0), + manualB (2) + } + +AprisaXEPSCActiveTx ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION "This indicates the active transmitter card." + SYNTAX INTEGER { TxA (0), + TxB (1) + } + +END diff --git a/MIBS/4rf/4RF-COMMON-MIB b/MIBS/4rf/4RF-COMMON-MIB new file mode 100644 index 0000000..4d37f0d --- /dev/null +++ b/MIBS/4rf/4RF-COMMON-MIB @@ -0,0 +1,708 @@ +COMMON-4RF DEFINITIONS ::= BEGIN + +-- +-- File: $Id: 4RF-COMMON-MIB.txt,v 1.23 2007/07/11 22:04:16 di Exp $ +-- +-- Copyright: 2004 4RF COMMUNICATIONS LTD +-- +-- Description: +-- Common MIB sub-tree for 4RF Communications Ltd., used by all products. +-- It defines some useful TEXT-CONVENTIONS and basic MIB objects relating +-- to 4RF products. +-- +-- Versions: +-- +-- Notes: +-- None +-- + +IMPORTS + + -- Standard imports + MODULE-IDENTITY, OBJECT-TYPE, OBJECT-IDENTITY, NOTIFICATION-TYPE, + Integer32, Unsigned32, Counter32, IpAddress + FROM SNMPv2-SMI + TEXTUAL-CONVENTION, DisplayString, DateAndTime + FROM SNMPv2-TC + MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP + FROM SNMPv2-CONF + + -- 4RF Specific imports + fourRFCommon + FROM PRODUCTS-MIB-4RF + FourRFImageVersion, FourRFSerialNumber, FourRFResetType, + FourRFProcessResultType, FourRFTftpFileName, FourRFFileSize, + FourRFImageStatus, FourRFImageType, FourRFWebUserEnabled, + FourRFWebUserGroup, FourRFTimeZone + FROM COMMON-TC-4RF + fourRFGeneric, fourRFModules + FROM MIB-4RF; + + +-- Module Identification +fourRFCommonModule MODULE-IDENTITY + LAST-UPDATED "200704300000Z" + ORGANIZATION "www.4rf.com" + CONTACT-INFO + "postal: 4RF Communications Ltd + 26 Glover Street + Ngauranga + PO Box 13-506 + Wellington 6032 + New Zealand + + phone: +64 4 499 6000 + email: support@4rf.com" + DESCRIPTION "Common 4RF MIB Objects." + + -- Revision history + -- (in reverse chronological order) + + REVISION "200704300000Z" + DESCRIPTION "Second draft" + + REVISION "200502110000Z" + DESCRIPTION "First draft" + ::= { fourRFModules 3 } + + +-- +-- Currently the MIB is still being defined, all objects are placed +-- under fourRFExperimental, when the MIB has been completed these +-- objects will be moved to fourRFGeneric. +-- + + +fourRFGroups OBJECT-IDENTITY + STATUS current + DESCRIPTION "The root of the OID sub-tree for the 4RF common object groups." + ::= { fourRFCommon 1 } + +fourRFObjects OBJECT-IDENTITY + STATUS current + DESCRIPTION "The root of the OID sub-tree for the 4RF common objects." + ::= { fourRFCommon 2 } + +fourRFEvents OBJECT-IDENTITY + STATUS current + DESCRIPTION "The root of the OID sub-tree for the 4RF common events." + ::= { fourRFCommon 3 } + +fourRFEventsV2 OBJECT-IDENTITY + STATUS current + DESCRIPTION "The root of the OID sub-tree for the 4RF common events." + ::= { fourRFEvents 0 } + + +-- *************************************************************************** +-- Basic terminal details +-- +-- The name, location and contact details are stored in the MIB-II System +-- entries sysName, sysLocation and sysContact respectively. +-- +-- *************************************************************************** + +fourRFSystem OBJECT IDENTIFIER ::= { fourRFObjects 1 } + +fourRFSystemID OBJECT-TYPE + SYNTAX DisplayString ( SIZE (0..255) ) + MAX-ACCESS read-write + STATUS current + DESCRIPTION "The terminal identifier, user defined." + ::= { fourRFSystem 1 } + +fourRFSystemSoftwareVersion OBJECT-TYPE + SYNTAX FourRFImageVersion + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The terminal software version details." + ::= { fourRFSystem 2 } + +fourRFSystemIpAddress OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION "IP address of terminal, care should be taken when changing + this value." + ::= { fourRFSystem 3 } + +fourRFSystemRemoteIpAddress OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION "IP address of remote terminal, this is the other end of the + radio link. This must be configured at commissioning." + ::= { fourRFSystem 4 } + +fourRFSystemSubnetMask OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION "The subnet mask for the terminal. This must be configured at + commissioning." + ::= { fourRFSystem 5 } + +fourRFSystemDefaultGateway OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION "The default gateway for the terminal. This must be configured + at commissioning." + ::= { fourRFSystem 6 } + +fourRFSystemIpAssignment OBJECT-TYPE + SYNTAX INTEGER { useDHCP (0), + userAssigned (1) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION "This indicates how the terminal IP address is configured. + This must be configured at commissioning. The IP address can + be assigned manually or by a DHCP server." + ::= { fourRFSystem 7 } + +fourRFSystemDateAndTime OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION "This indicates the current time from the terminal's real-time clock, + the time is measured in seconds since Midnight GMT on January 1 1970." + ::= { fourRFSystem 8 } + +fourRFSystemTftpServerAddress OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION "IP address of TFTP server used for uploading and downloading files." + ::= { fourRFSystem 9 } + +fourRFSystemSerialNumber OBJECT-TYPE + SYNTAX FourRFSerialNumber + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The unique serial number for the terminal." + ::= { fourRFSystem 10 } + +fourRFSystemLastReset OBJECT-TYPE + SYNTAX FourRFResetType + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The type of the last system reset." + ::= { fourRFSystem 11 } + +fourRFSystemTimeZone OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION "This indicates the offset from UTC time in minutes." + ::= { fourRFSystem 12 } + +fourRFSystemSyslogAddress OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION "The IP address of a remote syslogd server used to log system events." + ::= { fourRFSystem 13 } + +fourRFSystemSyslogPort OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION "The port to use when logging to a remote syslogd, the default is port 514." + ::= { fourRFSystem 14 } + +fourRFSystemTimeDaylightSavings OBJECT-TYPE + SYNTAX INTEGER { daylightSavingsDisabled (0), + daylightSavingsEnabled (1) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Indicates whether daylight savings is in use." + ::= { fourRFSystem 15 } + +fourRFSystemTimeZoneGMTOffset OBJECT-TYPE + SYNTAX FourRFTimeZone + MAX-ACCESS read-write + STATUS current + DESCRIPTION "This indicates the timezone offset from GMT." + ::= { fourRFSystem 16 } + +fourRFSystemMACAddress OBJECT-TYPE + SYNTAX DisplayString ( SIZE (0..32) ) + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The MAC Address for the terminal." + ::= { fourRFSystem 17 } + +fourRFSystemLocalRadioBIpAddress OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION "IP address of local Radio B terminal, this is the partner + radio of a SD link. This must be configured at commissioning." + ::= { fourRFSystem 18 } + +fourRFSystemRemoteRadioBIpAddress OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION "IP address of remote Radio B terminal, this is the partner + radio of a SD link. This must be configured at commissioning." + ::= { fourRFSystem 19 } + +fourRFSystemLocalRadioAIpAddress OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION "IP address of local Radio A terminal, this is the partner + radio of a SD link. This must be configured at commissioning." + ::= { fourRFSystem 20 } + +fourRFSystemGroup OBJECT-GROUP + OBJECTS { fourRFSystemID, + fourRFSystemSoftwareVersion, + fourRFSystemIpAddress, + fourRFSystemRemoteIpAddress, + fourRFSystemSubnetMask, + fourRFSystemDefaultGateway, + fourRFSystemIpAssignment, + fourRFSystemDateAndTime, + fourRFSystemTftpServerAddress, + fourRFSystemSerialNumber, + fourRFSystemLastReset, + fourRFSystemTimeZone, + fourRFSystemSyslogAddress, + fourRFSystemSyslogPort, + fourRFSystemTimeDaylightSavings, + fourRFSystemTimeZoneGMTOffset, + fourRFSystemMACAddress, + fourRFSystemLocalRadioBIpAddress, + fourRFSystemRemoteRadioBIpAddress, + fourRFSystemLocalRadioAIpAddress + } + STATUS current + DESCRIPTION "The 4RF common system settings group." + ::= { fourRFGroups 1 } + + +-- *************************************************************************** +-- System reset handling +-- +-- These MIB entries allow the system to be reset, currently two types +-- of reset are possible, shutdown and a restart. It may be that other +-- options should be supported to reset just the Linux software or to +-- perform a complete hardware reset. A reset can be instigated immediately +-- or at a specified time. In the case of a timed reset the reset may be +-- cancelled if required. +-- +-- An SNMP trap reset4RFEvent will be generated just before the reset is +-- performed. +-- +-- *************************************************************************** + +fourRFReset OBJECT IDENTIFIER ::= { fourRFObjects 2 } + +fourRFResetType OBJECT-TYPE + SYNTAX INTEGER { none (0), + softReset (1), + hardReset (2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Identifies the type of reset operation: + none - do nothing! + hardReset - complete reset of all components + softReset - reset of the CPU only, traffic is unaffected. + + The values mirror the ResetType textual convention but the + user cannot instigate a watchdog reset. This value is not + therefore not allowed." + ::= { fourRFReset 1 } + +fourRFResetTime OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Identifies the time of a delayed reset operation. This allows an + absolute time to be specified based on the system real-time clock. + The time is measured in seconds since Midnight GMT on January 1 1970." + ::= { fourRFReset 2 } + +fourRFResetCommand OBJECT-TYPE + SYNTAX INTEGER { none (0), + resetNow (1), + timedReset (2), + cancelReset (3) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Command to instigate or cancel a system reset, the reset may + happen immediately or at a specified time. Only a timed reset + can be cancelled." + ::= { fourRFReset 3 } + +fourRFResetGroup OBJECT-GROUP + OBJECTS { fourRFResetType, + fourRFResetTime, + fourRFResetCommand + } + STATUS current + DESCRIPTION "The 4RF common reset group." + ::= { fourRFGroups 2 } + + +-- *************************************************************************** +-- MIB configuration backup/restore +-- +-- These objects are used to control the backup of the MIB configuration +-- data. The configuration is downloaded to the TFTP server as a backup. +-- +-- SNMP traps will be generated each time a backup is performed to +-- indicate whether the file transfer was successful or not. +-- +-- *************************************************************************** + +fourRFMibBackup OBJECT IDENTIFIER ::= { fourRFObjects 3 } + +fourRFMibBackupFile OBJECT-TYPE + SYNTAX FourRFTftpFileName + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Path and file name for remote (TFTP) backup, relative to TFTP root." + ::= { fourRFMibBackup 1 } + +fourRFMibBackupCommand OBJECT-TYPE + SYNTAX INTEGER { none (0), + remoteBackup (1), + localBackup (2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Configuration command to backup a configuration setting the value + to localBackup or remoteBackup will instigate the backup. A local + backup simply stores the current MIB configuration into Flash memory + in the terminal. A remoteBackup uploads the MIB configuration to the + currently specified TFTP server" + ::= { fourRFMibBackup 2 } + +fourRFMibBackupResult OBJECT-TYPE + SYNTAX FourRFProcessResultType + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Configuration backup status, if no backup has been performed the + value is none otherwise the result from the last backup will be + returned. If a backup is in progress executing is returned." + ::= { fourRFMibBackup 3 } + +fourRFMibBackupGroup OBJECT-GROUP + OBJECTS { fourRFMibBackupFile, + fourRFMibBackupCommand, + fourRFMibBackupResult + } + STATUS current + DESCRIPTION "The 4RF common configuration backup group." + ::= { fourRFGroups 3 } + + +-- *************************************************************************** +-- File upload handling, files will always be uploaded to the backup location +-- in flash so we don't overwrite the currently running image/configuration. +-- This means we don't need to specify a target location for the download. +-- +-- It is possible to upload four types of files, a kernel image, a root file +-- system, MIB configuration and firmware (FPGA). The images may have extra +-- data added to allow the version information to be determined easily or +-- this could be coded into the file name. File uploads are always performed +-- immediately. +-- +-- *************************************************************************** + +fourRFUpload OBJECT IDENTIFIER ::= { fourRFObjects 4 } + +fourRFUploadType OBJECT-TYPE + SYNTAX FourRFImageType + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Identifies the type of image to be uploaded." + ::= { fourRFUpload 1 } + +fourRFUploadFile OBJECT-TYPE + SYNTAX FourRFTftpFileName + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Path and file name for remote (TFTP) upload/download, relative + to the TFTP server root." + ::= { fourRFUpload 2 } + +fourRFUploadCommand OBJECT-TYPE + SYNTAX INTEGER { none (0), + upload (1) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Command used to instigate a file upload." + ::= { fourRFUpload 3 } + +fourRFUploadResult OBJECT-TYPE + SYNTAX FourRFProcessResultType + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Status of a file upload, this will have to be polled to follow + the upload progress." + ::= { fourRFUpload 4 } + +fourRFUploadGroup OBJECT-GROUP + OBJECTS { fourRFUploadType, + fourRFUploadFile, + fourRFUploadCommand, + fourRFUploadResult + } + STATUS current + DESCRIPTION "The 4RF common file upload group." + ::= { fourRFGroups 4 } + + +-- +-- Image table, gives details of all the images currently stored in flash. +-- The details include the image type, status and version. Only one image of +-- each kernel or rootfs type may be active at any time. We may have one or more +-- inactive images however. +-- +-- The approach here allows the different elements making up the running +-- software to be updated and configured independently. It also also makes +-- it easier to handle more than two images if required. +-- +-- Example +-- +-- imageIndex imageType imageStatus imageVersion +-- 1 kernel active 2.4.20 +-- 2 rootfs inactive version 1 +-- 3 kernel inactive 2.4.21 +-- 4 configuration active Working version 5.0 29/6/03 +-- +-- MIB images are not stored in this table +-- + +fourRFImageTable OBJECT-TYPE + SYNTAX SEQUENCE OF FourRFImageTableEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "This table is used to report the image information for each + image stored in flash." + ::= { fourRFObjects 5 } + +fourRFImageTableEntry OBJECT-TYPE + SYNTAX FourRFImageTableEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "Identifies the image table index." + INDEX { fourRFImageIndex } + ::= { fourRFImageTable 1 } + +FourRFImageTableEntry ::= SEQUENCE { + fourRFImageIndex Integer32, + fourRFImageType INTEGER, + fourRFImageStatus INTEGER, + fourRFImageSize Unsigned32, + fourRFImageVersion OCTET STRING + } + +fourRFImageIndex OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "The image table index." + ::= { fourRFImageTableEntry 1 } + +fourRFImageType OBJECT-TYPE + SYNTAX FourRFImageType + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The type of image, kernel, rootfs or firmware." + ::= { fourRFImageTableEntry 2 } + +fourRFImageStatus OBJECT-TYPE + SYNTAX FourRFImageStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The image status, if current then the image is the current + running image. If selected the image will be used following + the next system reboot." + ::= { fourRFImageTableEntry 3 } + +fourRFImageSize OBJECT-TYPE + SYNTAX FourRFFileSize + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The image size in bytes." + ::= { fourRFImageTableEntry 4 } + +fourRFImageVersion OBJECT-TYPE + SYNTAX FourRFImageVersion + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The image version, string which can be used to identify the + image. This may include the firmware type, version number or + the build date. The exect format of this string will product + and/or image specific." + ::= { fourRFImageTableEntry 5 } + + +-- *************************************************************************** +-- The following objects allow the status of an image to be updated. A new +-- image can be selected to run. The new image will pnly be used following +-- a system reboot. +-- +-- *************************************************************************** + +fourRFImageControl OBJECT IDENTIFIER ::= { fourRFObjects 6 } + +fourRFImageTableIndex OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION "The image table index, the table entry to be updated." + ::= { fourRFImageControl 1 } + +fourRFImageTableCommand OBJECT-TYPE + SYNTAX INTEGER { none (0), + deactivateImage (1), + activateImage (2), + deleteImage (3) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Allows an image to be activated or deactivated, activating an + image will change its state to selected but the new image will + only be used following a reboot of the system." + ::= { fourRFImageControl 2 } + +fourRFImageControlGroup OBJECT-GROUP + OBJECTS { fourRFImageTableIndex, + fourRFImageTableCommand + } + STATUS current + DESCRIPTION "The 4RF common image control group." + ::= { fourRFGroups 6 } + + +-- *************************************************************************** +-- Web User Management +-- +-- These objects are used to control webaccess to the terminal. It allows +-- users to be added, deleted and modified. +-- +-- *************************************************************************** + +fourRFWebUserManagementTable OBJECT-TYPE + SYNTAX SEQUENCE OF FourRFWebUserEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "This table is used to view and modify the current web + interface users. Up to 16 different users may be defined." + ::= { fourRFObjects 7 } + +fourRFWebUserEntry OBJECT-TYPE + SYNTAX FourRFWebUserEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "Identifies the user management table index." + INDEX { fourRFWebUserIndex } + ::= { fourRFWebUserManagementTable 1 } + +FourRFWebUserEntry ::= SEQUENCE { + fourRFWebUserIndex Integer32, + fourRFWebUserName OCTET STRING, + fourRFWebUserPassword OCTET STRING, + fourRFWebUserGroup INTEGER, + fourRFWebUserEnabled INTEGER, + fourRFWebUserPasswordConfirm OCTET STRING + } + +fourRFWebUserIndex OBJECT-TYPE + SYNTAX Integer32 (0..10) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "The user management table index." + ::= { fourRFWebUserEntry 1 } + +fourRFWebUserName OBJECT-TYPE + SYNTAX DisplayString ( SIZE (0..32) ) + MAX-ACCESS read-write + STATUS current + DESCRIPTION "The web user name." + ::= { fourRFWebUserEntry 2 } + +fourRFWebUserPassword OBJECT-TYPE + SYNTAX OCTET STRING ( SIZE (4..32) ) + MAX-ACCESS read-write + STATUS current + DESCRIPTION "The password entry of a given user." + ::= { fourRFWebUserEntry 3 } + +fourRFWebUserGroup OBJECT-TYPE + SYNTAX FourRFWebUserGroup + MAX-ACCESS read-write + STATUS current + DESCRIPTION "The group to which the user belongs." + ::= { fourRFWebUserEntry 4 } + +fourRFWebUserEnabled OBJECT-TYPE + SYNTAX FourRFWebUserEnabled + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Determines if the user is enabled." + ::= { fourRFWebUserEntry 5 } + +fourRFWebUserPasswordConfirm OBJECT-TYPE + SYNTAX OCTET STRING ( SIZE (4..32) ) + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Dummy OID used for password confirmation in the web management interface." + ::= { fourRFWebUserEntry 6 } + + +-- *************************************************************************** +-- Common traps +-- +-- *************************************************************************** + +-- +-- Reset event, triggered when the terminal is about to reset. +-- + +fourRFResetEvent NOTIFICATION-TYPE + OBJECTS { fourRFResetType } + STATUS current + DESCRIPTION "Event indicating that a system reset is about to occur." + ::= { fourRFEventsV2 1 } + +-- +-- Backup status event, used to indicate whether a MIB configuration backup +-- to the TFTP server was successful +-- + +fourRFMibBackupStatusEvent NOTIFICATION-TYPE + OBJECTS { fourRFMibBackupFile, + fourRFMibBackupCommand, + fourRFMibBackupResult + } + STATUS current + DESCRIPTION "Event indicating the status of a configuration backup operation." + ::= { fourRFEventsV2 2 } + +-- +-- Upload status event, used to indicate whether a file upload from +-- the TFTP server was successful +-- + +fouRFUploadStatusEvent NOTIFICATION-TYPE + OBJECTS { fourRFUploadFile, + fourRFUploadType, + fourRFUploadResult + } + STATUS current + DESCRIPTION "Event indicating the status of a file upload operation." + ::= { fourRFEventsV2 3 } + +END diff --git a/MIBS/4rf/4RF-COMMON-TC b/MIBS/4rf/4RF-COMMON-TC new file mode 100644 index 0000000..904e102 --- /dev/null +++ b/MIBS/4rf/4RF-COMMON-TC @@ -0,0 +1,448 @@ +COMMON-TC-4RF DEFINITIONS ::= BEGIN + +-- +-- File: $Id: 4RF-COMMON-TC.txt,v 1.27 2007/05/07 00:19:51 pk Exp $ +-- +-- Copyright: 2004 4RF COMMUNICATIONS LTD +-- +-- Description: +-- Common MIB sub-tree for 4RF Communications Ltd., used by all products. +-- It defines some useful TEXT-CONVENTIONS relating to 4RF products. +-- +-- Versions: +-- +-- Notes: +-- None +-- + +IMPORTS + + -- Standard imports + MODULE-IDENTITY, OBJECT-IDENTITY + Integer32, Unsigned32, Counter32 + FROM SNMPv2-SMI + TEXTUAL-CONVENTION, DisplayString, DateAndTime + FROM SNMPv2-TC + + -- 4RF Specific imports + fourRFGeneric, fourRFModules + FROM MIB-4RF; + + +-- Module Identification +fourRFCommonTCModule MODULE-IDENTITY + LAST-UPDATED "200704300000Z" + ORGANIZATION "www.4rf.com" + CONTACT-INFO + "postal: 4RF Communications Ltd + 26 Glover Street + Ngauranga + PO Box 13-506 + Wellington 6032 + New Zealand + + phone: +64 4 499 6000 + email: support@4rf.com" + DESCRIPTION "Common 4RF MIB Textual Conventions." + + -- Revision history + -- (in reverse chronological order) + + REVISION "200704300000Z" + DESCRIPTION "Second draft" + + REVISION "200402130000Z" + DESCRIPTION "First draft" + ::= { fourRFModules 4 } + + +-- +-- LED control types +-- + +FourRFSimpleLedState ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION "The possible states for a simple LED." + SYNTAX INTEGER { off (0), + on (1) + } + +FourRFTriColourLedState ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION "The possible states of a three-colour LED." + SYNTAX INTEGER { off (0), + green (1), + red (2), + orange (3) } + + +-- +-- Basic alarm control types +-- + +FourRFAlarmSeverity ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION "The possible alarm severities, not all values need be used." + SYNTAX INTEGER { noSeverity (0), + -- informational (1), + -- warning (2), + minor (3), + major (4) + -- critical (5) + } + +FourRFAlarmPresent ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION "The possible alarm states, alarmPresent indicates that the + alarm is active." + SYNTAX INTEGER { noAlarmPresent (0), + alarmPresent (1) + } + +FourRFAlarmEnabled ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION "Indicates whether an alarm is enabled or not, it may be useful + to allow specific alarms to be enabled or disabled by the user." + SYNTAX INTEGER { disabled (0), + enabled (1) + } + +FourRFAlarmStatus ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION "This is used to identify current alarm status." + SYNTAX INTEGER { noAlarm (0), + informationAlarm (1), + warningAlarm (2), + minorAlarm (3), + majorAlarm (4), + criticalAlarm (5) + } + +FourRFMHSBStatus ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION "This is used to give the state of an MHSB terminal." + SYNTAX INTEGER { notAvailable (0), + active (1), + standby (2) + } + +FourRFMHSBCommand ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION "This is used to send a command to an MHSB terminal." + SYNTAX INTEGER { noCommand (0), + clearSwitchedAlarm (1), + forceSwitchover (2) + } + + +-- +-- Hardware version - an 8 bit integer value +-- + +FourRFHardwareVersion ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION "The hardware version details." + SYNTAX DisplayString ( SIZE (0..32) ) + + +-- +-- Terminal/Module Serial Number +-- + +FourRFSerialNumber ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION "A module/terminal serial number format xxxx-xxx." + SYNTAX OCTET STRING ( SIZE (8) ) + + +-- +-- Reset types +-- + +FourRFResetType ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION "The possible types of reset." + SYNTAX INTEGER { none (0), + softReset (1), + hardReset (2), + watchdogReset (3) + } + + +-- +-- Image details +-- + +FourRFImageType ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION "The possible image types to upload." + SYNTAX INTEGER { none (0), + kernel (1), + rootfs (2), + mib (3), + configuration (4), + firmware (5) + } + +FourRFImageStatus ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The possible image status values, currentImage means it is the running. + selectedImage means that the image has been selected and will be used + following the next reboot of the system, currentNotSelected means that + the image is currently in use but won't be following a reboot." + SYNTAX INTEGER { inactiveImage (0), + currentImage (1), + currentNotSelected (2), + selectedImage (3) + } + +FourRFImageVersion ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION "The image version details." + SYNTAX DisplayString ( SIZE (0..64) ) + + +-- +-- Other Types +-- + +FourRFProcessResultType ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION "The possible states for a process which takes time to complete." + SYNTAX INTEGER { none (0), + executing (1), + writingToFlash (2), + succeeded (3), + failed (4) + } + +FourRFTftpFileName ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION "The name of a file to transfered using TFTP." + SYNTAX DisplayString ( SIZE (0..255) ) + +FourRFFileSize ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION "A size of a file in bytes." + SYNTAX Unsigned32 + + +-- +-- Useful Radio Related Types +-- + +FourRFFrequency ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION "A frequency value in Hz." + SYNTAX Unsigned32 + +FourRFTxPower ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION "A transmitter power value in dBm." + SYNTAX INTEGER { noPower (0), + dbm10 (10), + dbm11 (11), + dbm12 (12), + dbm13 (13), + dbm14 (14), + dbm15 (15), + dbm16 (16), + dbm17 (17), + dbm18 (18), + dbm19 (19), + dbm20 (20), + dbm21 (21), + dbm22 (22), + dbm23 (23), + dbm24 (24), + dbm25 (25), + dbm26 (26), + dbm27 (27), + dbm28 (28), + dbm29 (29), + dbm30 (30), + dbm31 (31), + dbm32 (32), + dbm33 (33), + dbm34 (34), + dbm35 (35), + dbm36 (36), + dbm37 (37), + dbm38 (38), + dbm39 (39), + dbm40 (40) + } + +FourRFChannelWidth ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION "The possible channel width values." + SYNTAX INTEGER { invalidChannel (0), + channel20KHz (1), + channel25KHz (2), + channel50KHz (3), + channel75KHz (4), + channel100KHz (5), + channel125KHz (6), + channel150KHz (7), + channel200KHz (9), + channel250KHz (10), + channel400KHz (13), + channel500KHz (20), + channel800KHz (25), + channel1MHz (30), + channel1point25MHz (33), + channel1point35MHz (35), + channel1point75MHz (40), + channel2MHz (42), + channel2point5MHz (45), + channel3point5MHz (50), + channel5point25MHz (55), + channel7MHz (60), + channel14MHz (70) + } + +FourRFNetworkClockStatus ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION "The possible modulation types for the radio." + SYNTAX INTEGER { active (0), + inactive (1), + holdover (2) + } + +FourRFRSSI ::= TEXTUAL-CONVENTION + DISPLAY-HINT "d-1" + STATUS current + DESCRIPTION "A receiver RSSI value, in dBm." + SYNTAX Integer32(-2000..2000) + +FourRFSNR ::= TEXTUAL-CONVENTION + DISPLAY-HINT "d-2" + STATUS current + DESCRIPTION "A signal to noise ratio in dBm." + SYNTAX Integer32 + +FourRFModulationType ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION "The possible modulation types for the radio." + SYNTAX INTEGER { modQPSK (0), + mod16QAM (1), + mod32QAM (2), + mod64QAM (3), + mod128QAM (4), + mod256QAM (5), + + -- Modulation off + modNone (6) + } + +FourRFTemperature ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION "A temperature value in degrees Celcius." + SYNTAX Integer32 + +FourRFErrorCounter ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION "An error counter, e.g. for the uncorrectable error count." + SYNTAX Counter32 + +FourRFRfBand ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION "This is used to identify the frequency band of the transmitter + The bands are: + 330 to 400 MHz (300 MHz) + 400 to 470 MHz (400 MHz) + 1350 to 1550 MHz (1400 MHz) ." + SYNTAX INTEGER { invalidBand (0), + band300MHz (10), + band400MHz (20), + band700MHz (24), + band800MHz (26), + band900MHz (28), + band1400MHz (30) + } + +FourRFFanStatus ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION "This is used to identify current fan status." + SYNTAX INTEGER { notFitted (0), + fanOkay (1), + fanFailed (2) + } + +FourRFClockSource ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION "This is used to identify the clock source for the terminal." + SYNTAX INTEGER { networkClock (0), + linkClock (1), + internalClock (2) + } + +FourRFNetworkClockSelect ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION "This is used to select the priority of the clocks to use." + SYNTAX INTEGER { none (0), + primary (1), + secondary (2) + } + +FourRFLoopback ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION "This is used to control loopback or monitor status." + SYNTAX INTEGER { loopbackOff (0), + loopbackOn (1) + } + + +-- +-- Web User Handling +-- + +FourRFWebUserGroup ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION "This is used to identify the group to which a web user belongs." + SYNTAX INTEGER { readOnlyGroup (0), + readWriteGroup (1), + adminGroup (2) + } + +FourRFWebUserEnabled ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION "This is used to identify whether a web user is enabled." + SYNTAX INTEGER { userDisabled (0), + userEnabled (1) + } + +FourRFTimeZone ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION "This is used to assign an offset in minutes based on GMT timezone." + SYNTAX INTEGER { gmtMinusTwelve (-720), + gmtMinusEleven (-660), + gmtMinusTen (-600), + gmtMinusNine (-540), + gmtMinusEight (-480), + gmtMinusSeven (-420), + gmtMinusSix (-360), + gmtMinusFive (-300), + gmtMinusFour (-240), + gmtMinusThreePointFive (-210), + gmtMinusThree (-180), + gmtMinusTwo (-120), + gmtMinusOne (-60), + gmt (0), + gmtPlusOne (60), + gmtPlusTwo (120), + gmtPlusThree (180), + gmtPlusFour (240), + gmtPlusFive (300), + gmtPlusSix (360), + gmtPlusSeven (420), + gmtPlusEight (480), + gmtPlusNine (540), + gmtPlusTen (600), + gmtPlusEleven (660), + gmtPlusTwelve (720), + gmtPlusThirteen (800) + } + +END diff --git a/MIBS/4rf/4RF-MIB b/MIBS/4rf/4RF-MIB new file mode 100644 index 0000000..8e2b053 --- /dev/null +++ b/MIBS/4rf/4RF-MIB @@ -0,0 +1,104 @@ +MIB-4RF DEFINITIONS ::= BEGIN + +-- +-- File: $Id: 4RF-MIB.txt,v 1.3 2007/05/02 00:26:45 pk Exp $ +-- +-- Copyright: 2002 4RF COMMUNICATIONS LTD +-- +-- Description: +-- Top-level MIB sub-tree for 4RF Communications Ltd. +-- +-- Versions: +-- +-- Notes: +-- None +-- + +IMPORTS + + -- Standard imports + MODULE-IDENTITY, OBJECT-IDENTITY, enterprises + FROM SNMPv2-SMI; + + +-- Module Identification +fourRFRootModule MODULE-IDENTITY + LAST-UPDATED "200704300000Z" + ORGANIZATION "www.4rf.com" + CONTACT-INFO + "postal: 4RF Communications Ltd + 26 Glover Street + Ngauranga + PO Box 13-506 + Wellington 6032 + New Zealand + + phone: +64 4 499 6000 + email: support@4rf.com" + DESCRIPTION "The root MIB module for 4RF Communications Ltd." + + -- Revision history + -- (in reverse chronological order) + + REVISION "200704300000Z" + DESCRIPTION "Second draft" + + REVISION "200402130000Z" + DESCRIPTION "First draft" + ::= { fourRFModules 1 } + + +-- +-- +-- Root of OID sub-tree for 4RF as assigned by IANA +-- +-- This value MUST NOT BE MODIFIED +-- +-- + +fourRFRoot OBJECT-IDENTITY + STATUS current + DESCRIPTION "The root of the OID sub-tree for 4RF Communications Ltd." + ::= { enterprises 14817 } + + +-- +-- Top Level OID Registrations +-- + +fourRFRegistrations OBJECT-IDENTITY + STATUS current + DESCRIPTION "Sub-tree for registrations." + ::= { fourRFRoot 1 } + +fourRFModules OBJECT-IDENTITY + STATUS current + DESCRIPTION "Sub-tree for module registrations." + ::= { fourRFRoot 2 } + +fourRFGeneric OBJECT-IDENTITY + STATUS current + DESCRIPTION "Sub-tree for common object and event definitions." + ::= { fourRFRoot 3 } + +fourRFProducts OBJECT-IDENTITY + STATUS current + DESCRIPTION "Sub-tree for specific object and event definitions." + ::= { fourRFRoot 4 } + +fourRFCapabilities OBJECT-IDENTITY + STATUS current + DESCRIPTION "Sub-tree for agent profiles/capabilities." + ::= { fourRFRoot 5 } + +fourRFRequirements OBJECT-IDENTITY + STATUS current + DESCRIPTION "Sub-tree for management application requirements." + ::= { fourRFRoot 6 } + +fourRFExperimental OBJECT-IDENTITY + STATUS current + DESCRIPTION "Sub-tree for experimental definitions." + ::= { fourRFRoot 7 } + +END diff --git a/MIBS/4rf/4RF-PRODUCTS-MIB b/MIBS/4rf/4RF-PRODUCTS-MIB new file mode 100644 index 0000000..50b997b --- /dev/null +++ b/MIBS/4rf/4RF-PRODUCTS-MIB @@ -0,0 +1,84 @@ +PRODUCTS-MIB-4RF DEFINITIONS ::= BEGIN + +-- +-- File: $Id: 4RF-PRODUCTS-MIB.txt,v 1.3 2007/05/02 00:26:45 pk Exp $ +-- +-- Copyright: 2002 4RF COMMUNICATIONS LTD +-- +-- Description: +-- Products MIB sub-tree for 4RF Communications Ltd. It defines the root +-- identifiers for all 4RF SNMP managed products. +-- +-- Versions: +-- +-- Notes: +-- None +-- + +IMPORTS + + -- Standard imports + MODULE-IDENTITY, OBJECT-IDENTITY, enterprises + FROM SNMPv2-SMI + + -- 4RF Specific imports + fourRFModules, fourRFProducts, fourRFExperimental + FROM MIB-4RF; + + +-- Module Identification +fourRFProductsModule MODULE-IDENTITY + LAST-UPDATED "200704300000Z" + ORGANIZATION "www.4rf.com" + CONTACT-INFO + "postal: 4RF Communications Ltd + 26 Glover Street + Ngauranga + PO Box 13-506 + Wellington 6032 + New Zealand + + phone: +64 4 499 6000 + email: support@4rf.com" + DESCRIPTION + "4RF product registrations, all 4RF SNMP managed products have + a root identifier specified here." + + -- Revision history + -- (in reverse chronological order) + + REVISION "200704300000Z" + DESCRIPTION "Second draft" + + REVISION "200402130000Z" + DESCRIPTION "First draft" + ::= { fourRFModules 2 } + + +-- +-- OID Registrations +-- + + +-- +-- Currently the MIB is still being defined, all objects are placed +-- under fourRFExperimental, when the MIB has been completed these +-- objects will be moved to fourRFProducts. +-- + +fourRFCommon OBJECT-IDENTITY + STATUS current + DESCRIPTION "Sub-tree for common elements." + ::= { fourRFExperimental 1 } + +fourRFAprisa OBJECT-IDENTITY + STATUS current + DESCRIPTION "Sub-tree for Aprisa/AprisaView." + ::= { fourRFExperimental 2 } + +fourRFAprisaXE OBJECT-IDENTITY + STATUS current + DESCRIPTION "Sub-tree for AprisaXE." + ::= { fourRFExperimental 3 } + +END |