summaryrefslogtreecommitdiff
path: root/MIBS/4rf/4RF-APRISAXE-TC
diff options
context:
space:
mode:
Diffstat (limited to 'MIBS/4rf/4RF-APRISAXE-TC')
-rw-r--r--MIBS/4rf/4RF-APRISAXE-TC1116
1 files changed, 1116 insertions, 0 deletions
diff --git a/MIBS/4rf/4RF-APRISAXE-TC b/MIBS/4rf/4RF-APRISAXE-TC
new file mode 100644
index 0000000..68d7f9b
--- /dev/null
+++ b/MIBS/4rf/4RF-APRISAXE-TC
@@ -0,0 +1,1116 @@
+APRISAXE-TC-4RF DEFINITIONS ::= BEGIN
+
+--
+-- File: $Id: 4RF-APRISAXE-TC.txt,v 1.111 2007/08/01 04:52:02 ma Exp $
+--
+-- Copyright: 2004 4RF COMMUNICATIONS LTD
+--
+-- Description:
+-- Textual Conventions for AprisaXE project.
+--
+-- Versions:
+--
+-- Release 3
+-- Added support for 4-wire cards and configurable cross-connections
+--
+-- Notes:
+-- None
+--
+
+
+IMPORTS
+
+ -- Standard imports
+ MODULE-IDENTITY, OBJECT-TYPE, OBJECT-IDENTITY, NOTIFICATION-TYPE,
+ Integer32, Unsigned32, Counter32, IpAddress
+ FROM SNMPv2-SMI
+ TEXTUAL-CONVENTION, DisplayString
+ FROM SNMPv2-TC
+ MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
+ FROM SNMPv2-CONF
+
+ -- 4RF Specific imports
+ fourRFModules
+ FROM MIB-4RF;
+
+
+-- Module Identification
+fourRFAprisaXETCModule MODULE-IDENTITY
+ LAST-UPDATED "200704300000Z"
+ ORGANIZATION "www.4rf.com"
+ CONTACT-INFO
+ "postal: 4RF Communications Ltd
+ 26 Glover Street
+ Ngauranga
+ PO Box 13-506
+ Wellington 6032
+ New Zealand
+
+ phone: +64 4 499 6000
+ email: support@4rf.com"
+ DESCRIPTION "Textual Conventions for the AprisaXE project"
+
+ -- Revision history
+ -- (in reverse chronological order)
+
+ REVISION "200704300000Z"
+ DESCRIPTION "Second draft"
+
+ REVISION "200412030152Z"
+ DESCRIPTION "First draft"
+ ::= { fourRFModules 6 }
+
+
+AprisaXESlotNumber ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION "Represents a slot number in the AprisaXE, the slots include
+ the modem, transmitter and receiver as well as the MUX cards.
+ H/W Slot Card Slot Name
+ 0 Aux/Modem Aux
+ 1 MUX Card H
+ 2 MUX Card G
+ 3 MUX Card F
+ 4 MUX Card E
+ 5 MUX Card D
+ 6 MUX Card C
+ 7 MUX Card B
+ 8 MUX Card A
+ 9 Transmitter Transmitter
+ 10 Receiver Receiver
+ Slots may or may not be populated."
+ SYNTAX INTEGER { rxSlot (0),
+ txSlot (1),
+
+ -- MUX card slots
+ slotA (2),
+ slotB (3),
+ slotC (4),
+ slotD (5),
+ slotE (6),
+ slotF (7),
+ slotG (8),
+ slotH (9),
+
+ -- Modem
+ auxSlot (10),
+
+ noSlot (255)
+ }
+
+AprisaXEHardwareVersion ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION "Represents a single byte hardware version number."
+ SYNTAX INTEGER ( 0..255 )
+
+AprisaXECardType ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION "This is used to identify the type of MUX card in a slot.
+ The values for the enumerations match the hardware type
+ values returned from the MUX card FPGAs and EEPROMs."
+ SYNTAX INTEGER { none (0), -- No card present
+ motherboard ('E0'h),
+ transmitterCard ('E3'h),
+ receiverCard ('E4'h),
+ quadJETCard ('E5'h),
+ quadFourWireCard ('E7'h),
+ dualFXOCard ('E8'h),
+ dualFXSCard ('E9'h),
+ modemCard ('EA'h),
+ quadV24Card ('EB'h),
+ hssCard ('EC'h),
+ pscCard ('ED'h),
+ picCard ('EE'h),
+ dualJETCard ('D5'h),
+ singleJETCard ('C5'h)
+ }
+
+AprisaXEAlarmSource ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION "This is used to identify the source of an alarm."
+ SYNTAX INTEGER { none (0),
+
+ -- Card level alarms
+ modem (1),
+ transmitter (2),
+ receiver (3),
+ quadJET (4),
+ quadFourWire (5),
+ dualFxo (6),
+ dualFxs (7),
+ quadV24 (8),
+ highSpeedSync (9),
+ psc (10),
+ pic (11),
+ dualJET (12),
+ singleJET (13),
+
+ -- External alarms
+ external1 (50),
+ external2 (51),
+
+ -- Remote alarms
+ remote (60),
+
+ -- User specified
+ user1 (70),
+ user2 (71),
+
+ -- System level alarms, e.g. card mismatch, s/w upgrade
+ system (100),
+ swUpgrade (101)
+ }
+
+AprisaXEPortNumber ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION "This is used to identify a port e.g. reporting an alarm.
+ Not all alarms are associated with a port, in these cases
+ noPort will be used."
+ SYNTAX INTEGER { noPort (0),
+ -- We have up to four ports per MUX card
+ portOne (1),
+ portTwo (2),
+ portThree (3),
+ portFour (4)
+ }
+
+AprisaXEAlarmOutput ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION "This is used to map alarm to external outputs."
+ SYNTAX INTEGER { none (0),
+ -- Map to external outputs
+ externalOutput1 (1),
+ externalOutput2 (2),
+ externalOutput3 (3),
+ externalOutput4 (4)
+ }
+
+AprisaXEAlarmMapping ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION "This is used to map alarm to external outputs."
+ SYNTAX INTEGER { none (0),
+ localMajor (1),
+ localMinor (2),
+ remoteMajor (3),
+ remoteMinor (4),
+ remoteInput1 (5),
+ remoteInput2 (6)
+ }
+
+AprisaXEAlarmPolarity ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION "This is used to indicate the polarity indicating an alarm
+ present on the external outputs."
+ SYNTAX INTEGER { polarityLow (0),
+ polarityHigh (1)
+ }
+
+AprisaXEAdcVoltage ::= TEXTUAL-CONVENTION
+ DISPLAY-HINT "d-3"
+ STATUS current
+ DESCRIPTION "A voltage read from an ADC, in millivolts."
+ SYNTAX Integer32
+
+
+AprisaXEDbValue ::= TEXTUAL-CONVENTION
+ DISPLAY-HINT "d-1"
+ STATUS current
+ DESCRIPTION "A value displayed in dB's."
+ SYNTAX Integer32
+
+
+AprisaXEIQData ::= TEXTUAL-CONVENTION
+ DISPLAY-HINT "2x:"
+ STATUS current
+ DESCRIPTION "A sequence of IQ data pairs, each individual value is 16 bit
+ thus a single IQ pair is 32 bits."
+ SYNTAX OCTET STRING ( SIZE (0..200) )
+
+AprisaXEAlarmType ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION "The type of an alarm."
+ SYNTAX INTEGER { none (0),
+
+ -- Transmitter Alarms
+ txADCChZeroHi (1), -- ADC zero high threshold has been passed
+ txADCChZeroLo (2), -- ADC zero low threshold has been passed
+ txADCChOneHi (3), -- ADC one high threshold has been passed
+ txADCChOneLo (4), -- ADC one low threshold has been passed
+ txADCChTwoHi (5), -- ADC two high threshold has been passed
+ txADCChTwoLo (6), -- ADC two low threshold has been passed
+ txADCChThreeHi (7), -- ADC three high threshold has been passed
+ txADCChThreeLo (8), -- ADC three low threshold has been passed
+ txADCChFourHi (9), -- ADC four high threshold has been passed
+ txADCChFourLo (10), -- ADC four low threshold has been passed
+ txADCChFiveHi (11), -- ADC five high threshold has been passed
+ txADCChFiveLo (12), -- ADC five low threshold has been passed
+ txADCChSixHi (13), -- ADC six high threshold has been passed
+ txADCChSixLo (14), -- ADC six low threshold has been passed
+ txADCChSevenHi (15), -- ADC seven high threshold has been passed
+ txADCChSevenLo (16), -- ADC seven low threshold has been passed
+ txADCChEightHi (17), -- ADC eight high threshold has been passed
+ txADCChEightLo (18), -- ADC eight low threshold has been passed
+ txADCChNineHi (19), -- ADC nine high threshold has been passed
+ txADCCNineLo (20), -- ADC nine low threshold has been passed
+ txADCChTenHi (21), -- ADC ten high threshold has been passed
+ txADCChTenLo (22), -- ADC ten low threshold has been passed
+ txADCChElevenHi (23), -- ADC eleven high threshold has been passed
+ txADCChElevenLo (24), -- ADC eleven low threshold has been passed
+ txSynthLD (25), -- Synth is not locked
+ tx5VFail (26), -- 5V supply has failed
+ tx11VFail (27), -- 11V supply is off/has failed
+ tx28VFail (28), -- 28V supply has failed
+ txEEFail (29), -- EEPROM contents are corrupt
+ txTSensorFail (30), -- Temperature sensor has failed
+ txReturnLoss (31), -- Return loss is too high
+ txAmplifierBalance (32), -- One side of amplifier has failed
+ txMibFail (33), -- MIB is are corrupt in EEPROM
+
+ -- Receiver Alarms
+ rxADCChZeroHi (50), -- ADC zero high threshold has been passed
+ rxADCChZeroLo (51), -- ADC zero low threshold has been passed
+ rxADCChOneHi (52), -- ADC one high threshold has been passed
+ rxADCChOneLo (53), -- ADC one low threshold has been passed
+ rxADCChTwoHi (54), -- ADC two high threshold has been passed
+ rxADCChTwoLo (55), -- ADC two low threshold has been passed
+ rxADCChThreeHi (56), -- ADC three high threshold has been passed
+ rxADCChThreeLo (57), -- ADC three low threshold has been passed
+ rxADCChFourHi (58), -- ADC four high threshold has been passed
+ rxADCChFourLo (59), -- ADC four low threshold has been passed
+ rxADCChFiveHi (60), -- ADC five high threshold has been passed
+ rxADCChFiveLo (61), -- ADC five low threshold has been passed
+ rxADCChSixHi (62), -- ADC six high threshold has been passed
+ rxADCChSixLo (63), -- ADC six low threshold has been passed
+ rxADCChSevenHi (64), -- ADC seven high threshold has been passed
+ rxADCChSevenLo (65), -- ADC seven low threshold has been passed
+ rxADCChEightHi (66), -- ADC eight high threshold has been passed
+ rxADCChEightLo (67), -- ADC eight low threshold has been passed
+ rxADCChNineHi (68), -- ADC nine high threshold has been passed
+ rxADCCNineLo (69), -- ADC nine low threshold has been passed
+ rxADCChTenHi (70), -- ADC ten high threshold has been passed
+ rxADCChTenLo (71), -- ADC ten low threshold has been passed
+ rxRSSIHi (72),
+ rxRSSILo (73),
+ rx12VFail (74),
+ rxSynthLD (75),
+ rxEEFail (76),
+ rxOff (77),
+ rxMibFail (78), -- MIB is are corrupt in EEPROM
+
+ --Modem Alarms
+ mdLOS (100),
+ mdLink (101),
+ mdStatus (102),
+ mdDemodAlignmentLost (103),
+ mdTdmAlignmentLost (104),
+ mdRefAFail (105),
+ mdRefBFail (106),
+ mdClkSyncFail (107),
+ mdNetClkConfig (108),
+ mdUCEPresent (109),
+ mdInitFail (110),
+ mdEEFail (120),
+
+ --General Mux alarms
+ muxId (150),
+ muxInit (151),
+ muxStat (152),
+ muxClk (153),
+ muxMibEEFail (154),
+ muxCharEEFail (155),
+
+ --E1/T1 Mux Alarms
+ e1LOF (200), -- Loss of frame
+ e1AIS (201),
+ e1RAI (202),
+ e1RMAI (203),
+ e1TS16AIS (204),
+ e1TS16LOS (205),
+ e1LOS (206),
+ e1CRC4 (207),
+ t1LOF (220), -- Loss of frame
+ t1AIS (221),
+ t1RAI (222),
+ t1LOS (226),
+ t1CRC6 (227),
+
+ --motherboard alarms
+ mbHwHsc (250), -- Unsupported hardware version was detected
+ mbFan1Fail (251), -- Fan 1 has failed
+ mbFan2Fail (252), -- Fan 2 has failed
+ mbInvalidConfig (253),
+ mbCardMismatch (254), -- Expected and actual installed MUX card mismatch
+ mbEEFail (255), -- General EEPROM configuration problem
+
+ --cross connect alarms
+ ccDataFail (300), -- Cross-connection data is invalid
+ ccNoBandwidth (301), -- Insufficient bandwidth for specified cross-connects
+
+ --mhsb alarms
+ mhsbSwitchToStandby (325),
+
+ -- External alarms
+ externalAlarm1 (350), -- External Input alarm 1 is present
+ externalAlarm2 (351), -- External Input alarm 2 is present
+ externalOutputAlarm1 (352), -- An alarm is active on External Output 1
+ externalOutputAlarm2 (353), -- An alarm is active on External Output 2
+ externalOutputAlarm3 (354), -- An alarm is active on External Output 3
+ externalOutputAlarm4 (355), -- An alarm is active on External Output 4
+
+ -- Remote Alarms
+ remoteMajorAlarm (400), -- A major alarm is present on the remote terminal
+ remoteMinorAlarm (401), -- A minor alarm is present on the remote terminal
+
+ --FXO alarms
+ fxoCodecOvld (402),
+ fxoBillToneOvld (403),
+ fxoUnplug (404),
+ fxoCurrentOvld (405),
+
+ --FXS ALARMS
+ fxsCalibError (406),
+ fxsDCDCError (407),
+ fxsCASLock (408),
+
+ -- HSS Alarms
+ hssTdmLock (500),
+ hss32MhzReset (501),
+ hssTdmReset (502),
+ hssLoss (503),
+ hssRxFifoFull (504),
+ hssRxFifoEmpty (505),
+ hssTxFifoFull (506),
+ hssTxFifoEmpty (507),
+ hssRxClockInvalid (508),
+ hssTxClockInvalid (509),
+
+ -- V24 Alarms
+ v24CtrlLineLoss (525),
+
+ --Generic Alarms
+ altImageTableUsed (550),
+ defaultImageTableUsed (551),
+ uploadFail (552),
+
+ -- PSC Alarms
+ pscDemuxAlignmentLost (575),
+ pscTDMAlignmentLost (576),
+ pscMuxAlignmentError (577),
+ pscCompanionTxFail (578),
+ pscSoftwareOverride (579),
+ pscInvalidSwitchValue (580),
+
+ -- HSD Alarms
+ hsdParamMismatch (600),
+ hsdCompanionLost (601),
+ hsdPMTxFreq (602),
+ hsdPMRxFreq (603),
+ hsdPMTermModState (604),
+ hsdPMTermRfChWidth (605),
+ hsdPMTxPower (606),
+ hsdPMModemIntlvEna (607),
+
+ -- Used to check alarm ranges
+ lastAlarm (608)
+ }
+
+AprisaXEChannelControlType ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION "This is used to set the control the channels, enabling and
+ disabling E1/T1 ports."
+ SYNTAX INTEGER { off (0),
+ on (1)
+ }
+
+AprisaXETdmPortType ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION "This is used to set the port out to the TDM bus."
+ SYNTAX INTEGER { tdmAo (0),
+ tdmBo (1),
+ tdmCo (2),
+ tdmDo (3),
+ tdmAi (4),
+ tdmBi (5),
+ tdmCi (6),
+ tdmDi (7)
+ }
+
+AprisaXETdmBus ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION "This is used to set the TDM bus to use."
+ SYNTAX INTEGER { tdmBusA (0),
+ tdmBusB (1),
+ tdmBusC (2),
+ tdmBusD (3)
+ }
+
+AprisaXEQuadJetTrafficType ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION "This is used to set the traffic rate for the Quad JET card."
+ SYNTAX INTEGER { e1Traffic (0),
+ t1Traffic (1),
+ j1Traffic (2)
+ }
+
+AprisaXEQuadJetLineEncoding ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION "This is used to set the line encoding for the Quad JET card the
+ default is HDB3 for E1 and B8ZS for T1."
+ SYNTAX INTEGER { defaultLineEncoding (0),
+ hDB3LineEncoding (2),
+ b8ZSLineEncoding (4),
+ amiLineEncoding (1)
+ }
+
+AprisaXEQuadJetWaveFormShapers ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION "This is used to set the T1 Tx Waveform Shaper for a port;
+ The default value is 0~133 ft."
+ SYNTAX INTEGER { wfs0To133Ft (2),
+ wfs133To266Ft (3),
+ wfs266To399Ft (4),
+ wfs399To533Ft (5),
+ wfs533To655Ft (6)
+ }
+
+AprisaXEQuadJetMultiframeEnable ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION "This is used to enable/disable support for transport of T1 SF
+ and ESF multiframe sync for a port."
+ SYNTAX INTEGER { t1MFOff (0),
+ t1MFOn (1)
+ }
+
+AprisaXEDataStatus ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION "This indicates the state of receiver, transmitter or MUX card
+ MIB orcharacterisation data."
+ SYNTAX INTEGER { invalid (0),
+ valid (1)
+ }
+
+AprisaXEAdpcmCompression ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION "This defines the Compression available on ADPCM."
+ SYNTAX INTEGER { kbits16 (0),
+ kbits24 (1),
+ kbits32 (2),
+ kbits64 (3),
+ kbits0 (4)
+ }
+
+AprisaXESignalState ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION "This indicates the state of CAS signalling."
+ SYNTAX INTEGER { normal (0),
+ invert (1)
+ }
+
+AprisaXEPcmLaw ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION "Type of PCM encoding available."
+ SYNTAX INTEGER { alaw (0),
+ ulaw (1)
+ }
+
+AprisaXE4WRxGain ::= TEXTUAL-CONVENTION
+ STATUS obsolete
+ DESCRIPTION "The gain in half dB steps for 4wire mux cards."
+ SYNTAX INTEGER { dbpos40 (0),
+ dbpos35 (1),
+ dbpos30 (2),
+ dbpos25 (3),
+ dbpos20 (4),
+ dbpos15 (5),
+ dbpos10 (6),
+ dbpos05 (7),
+ dbpos0 (8),
+ dbneg05 (9),
+ dbneg10 (10),
+ dbneg15 (11),
+ dbneg20 (12),
+ dbneg25 (13),
+ dbneg30 (14),
+ dbneg35 (15),
+ dbneg40 (16),
+ dbneg45 (17),
+ dbneg50 (18),
+ dbneg55 (19),
+ dbneg60 (20),
+ dbneg65 (21),
+ dbneg70 (22),
+ dbneg75 (23),
+ dbneg80 (24),
+ dbneg85 (25),
+ dbneg90 (26),
+ dbneg95 (27),
+ dbneg100 (28),
+ dbneg105 (29),
+ dbneg110 (30),
+ dbneg115 (31),
+ dbneg120 (32),
+ dbneg125 (33),
+ dbneg130 (34),
+ dbneg135 (35),
+ dbneg140 (36)
+ }
+
+AprisaXE4WTxGain ::= TEXTUAL-CONVENTION
+ STATUS obsolete
+ DESCRIPTION "The gain in half dB steps for 4wire mux cards."
+ SYNTAX INTEGER { pos140 (0),
+ pos135 (1),
+ pos130 (2),
+ pos125 (3),
+ pos120 (4),
+ pos115 (5),
+ pos110 (6),
+ pos105 (7),
+ pos100 (8),
+ pos95 (9),
+ pos90 (10),
+ pos85 (11),
+ pos80 (12),
+ pos75 (13),
+ pos70 (14),
+ pos65 (15),
+ pos60 (16),
+ pos55 (17),
+ pos50 (18),
+ pos45 (19),
+ pos40 (20),
+ pos35 (21),
+ pos30 (22),
+ pos25 (23),
+ pos20 (24),
+ pos15 (25),
+ pos10 (26),
+ pos05 (27),
+ pos0 (28),
+ neg05 (29),
+ neg10 (30),
+ neg15 (31),
+ neg20 (32),
+ neg25 (33),
+ neg30 (34),
+ neg35 (35),
+ neg40 (36)
+ }
+
+AprisaXE4WInputLevel ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION "The input (A->D) level in half dB steps for the 4wire mux cards."
+ SYNTAX INTEGER { q4emadpos40 (36),
+ q4emadpos35 (35),
+ q4emadpos30 (34),
+ q4emadpos25 (33),
+ q4emadpos20 (32),
+ q4emadpos15 (31),
+ q4emadpos10 (30),
+ q4emadpos05 (29),
+ q4emadpos0 (28),
+ q4emadneg05 (27),
+ q4emadneg10 (26),
+ q4emadneg15 (25),
+ q4emadneg20 (24),
+ q4emadneg25 (23),
+ q4emadneg30 (22),
+ q4emadneg35 (21),
+ q4emadneg40 (20),
+ q4emadneg45 (19),
+ q4emadneg50 (18),
+ q4emadneg55 (17),
+ q4emadneg60 (16),
+ q4emadneg65 (15),
+ q4emadneg70 (14),
+ q4emadneg75 (13),
+ q4emadneg80 (12),
+ q4emadneg85 (11),
+ q4emadneg90 (10),
+ q4emadneg95 (9),
+ q4emadneg100 (8),
+ q4emadneg105 (7),
+ q4emadneg110 (6),
+ q4emadneg115 (5),
+ q4emadneg120 (4),
+ q4emadneg125 (3),
+ q4emadneg130 (2),
+ q4emadneg135 (1),
+ q4emadneg140 (0)
+ }
+
+AprisaXE4WOutputLevel ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION "The output (D->A) level in half dB steps for the 4wire mux cards."
+ SYNTAX INTEGER { q4emdapos40 (0),
+ q4emdapos35 (1),
+ q4emdapos30 (2),
+ q4emdapos25 (3),
+ q4emdapos20 (4),
+ q4emdapos15 (5),
+ q4emdapos10 (6),
+ q4emdapos05 (7),
+ q4emdapos0 (8),
+ q4emdaneg05 (9),
+ q4emdaneg10 (10),
+ q4emdaneg15 (11),
+ q4emdaneg20 (12),
+ q4emdaneg25 (13),
+ q4emdaneg30 (14),
+ q4emdaneg35 (15),
+ q4emdaneg40 (16),
+ q4emdaneg45 (17),
+ q4emdaneg50 (18),
+ q4emdaneg55 (19),
+ q4emdaneg60 (20),
+ q4emdaneg65 (21),
+ q4emdaneg70 (22),
+ q4emdaneg75 (23),
+ q4emdaneg80 (24),
+ q4emdaneg85 (25),
+ q4emdaneg90 (26),
+ q4emdaneg95 (27),
+ q4emdaneg100 (28),
+ q4emdaneg105 (29),
+ q4emdaneg110 (30),
+ q4emdaneg115 (31),
+ q4emdaneg120 (32),
+ q4emdaneg125 (33),
+ q4emdaneg130 (34),
+ q4emdaneg135 (35),
+ q4emdaneg140 (36)
+ }
+
+AprisaXEFXSInputLevel ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION "The output (A->D) level in half dB steps for the DFXS mux cards."
+ SYNTAX INTEGER {
+ -- dfxsadpos30 (25),
+ -- dfxsadpos25 (24),
+ dfxsadpos20 (23),
+ dfxsadpos15 (22),
+ dfxsadpos10 (21),
+ dfxsadpos05 (20),
+ dfxsadpos0 (19),
+ dfxsadneg05 (18),
+ dfxsadneg10 (17),
+ dfxsadneg15 (16),
+ dfxsadneg20 (15),
+ dfxsadneg25 (14),
+ dfxsadneg30 (13),
+ dfxsadneg35 (12),
+ dfxsadneg40 (11),
+ dfxsadneg45 (10),
+ dfxsadneg50 (9),
+ dfxsadneg55 (8),
+ dfxsadneg60 (7),
+ dfxsadneg65 (6),
+ dfxsadneg70 (5),
+ dfxsadneg75 (4),
+ dfxsadneg80 (3),
+ dfxsadneg85 (2),
+ dfxsadneg90 (1)
+ }
+
+AprisaXEFXSOutputLevel ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION "The output (D->A) level in half dB steps for the DFXS mux cards."
+ SYNTAX INTEGER { dfxsdapos25 (1),
+ dfxsdapos20 (2),
+ dfxsdapos15 (3),
+ dfxsdapos10 (4),
+ dfxsdapos05 (5),
+ dfxsdapos0 (6),
+ dfxsdaneg05 (7),
+ dfxsdaneg10 (8),
+ dfxsdaneg15 (9),
+ dfxsdaneg20 (10),
+ dfxsdaneg25 (11),
+ dfxsdaneg30 (12),
+ dfxsdaneg35 (13),
+ dfxsdaneg40 (14),
+ dfxsdaneg45 (15),
+ dfxsdaneg50 (16),
+ dfxsdaneg55 (17),
+ dfxsdaneg60 (18),
+ dfxsdaneg65 (19),
+ dfxsdaneg70 (20),
+ dfxsdaneg75 (21),
+ dfxsdaneg80 (22),
+ dfxsdaneg85 (23),
+ dfxsdaneg90 (24),
+ dfxsdaneg95 (25)
+ }
+
+AprisaXEFXOInputLevel ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION "The output (A->D) level in half dB steps for the DFXO mux cards."
+ SYNTAX INTEGER { dfxoadpos10 (22),
+ dfxoadpos05 (21),
+ dfxoadpos0 (20),
+ dfxoadneg05 (19),
+ dfxoadneg10 (18),
+ dfxoadneg15 (17),
+ dfxoadneg20 (16),
+ dfxoadneg25 (15),
+ dfxoadneg30 (14),
+ dfxoadneg35 (13),
+ dfxoadneg40 (12),
+ dfxoadneg45 (11),
+ dfxoadneg50 (10),
+ dfxoadneg55 (9),
+ dfxoadneg60 (8),
+ dfxoadneg65 (7),
+ dfxoadneg70 (6),
+ dfxoadneg75 (5),
+ dfxoadneg80 (4),
+ dfxoadneg85 (3),
+ dfxoadneg90 (2),
+ dfxoadneg95 (1),
+ dfxoadneg100 (0)
+ }
+
+AprisaXEFXOOutputLevel ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION "The output (D->A) level in half dB steps for the DFXO mux cards."
+ SYNTAX INTEGER { dfxodapos10 (18),
+ dfxodapos05 (19),
+ dfxodapos0 (20),
+ dfxodaneg05 (21),
+ dfxodaneg10 (22),
+ dfxodaneg15 (23),
+ dfxodaneg20 (24),
+ dfxodaneg25 (25),
+ dfxodaneg30 (26),
+ dfxodaneg35 (27),
+ dfxodaneg40 (28),
+ dfxodaneg45 (29),
+ dfxodaneg50 (30),
+ dfxodaneg55 (31),
+ dfxodaneg60 (32),
+ dfxodaneg65 (33),
+ dfxodaneg70 (34),
+ dfxodaneg75 (35),
+ dfxodaneg80 (36),
+ dfxodaneg85 (37),
+ dfxodaneg90 (38),
+ dfxodaneg95 (39),
+ dfxodaneg100 (40)
+ }
+
+AprisaXEFXOCountry ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION "The country code for FXO mux cards this will need to be completed later."
+ SYNTAX INTEGER { argentina (0),
+ australia (1),
+ austria (2),
+ bahrain (3),
+ belgium (4),
+ brazil (5),
+ bulgaria (6),
+ canada (7),
+ chile (8),
+ china (9),
+ columbia (10),
+ croatia (11),
+ cyprus (12),
+ czechrep (13),
+ denmark (14),
+ ecuador (15),
+ egypt (16),
+ elslavador (17),
+ finland (18),
+ france (19),
+ germany (20),
+ greece (21),
+ guam (22),
+ hongkong (23),
+ hungary (24),
+ iceland (25),
+ india (26),
+ indonesia (27),
+ ireland (28),
+ israel (29),
+ italy (30),
+ japan (31),
+ jordan (32),
+ kazakhstan (33),
+ kuwait (34),
+ latvia (35),
+ lebanon (36),
+ luxembourg (37),
+ macao (38),
+ malaysia (39),
+ malta (40),
+ mexico (41),
+ morocco (42),
+ netherlands (43),
+ newzealand (44),
+ nigeria (45),
+ norway (46),
+ oman (47),
+ pakistan (48),
+ peru (49),
+ philippines (50),
+ poland (51),
+ portugal (52),
+ romania (53),
+ russia (54),
+ saudiarabia (55),
+ singapore (56),
+ slovakia (57),
+ slovenia (58),
+ southafrica (59),
+ southkorea (60),
+ spain (61),
+ sweden (62),
+ switzerland (63),
+ syria (64),
+ taiwan (65),
+ tbr21 (66),
+ thailand (67),
+ uae (68),
+ uk (69),
+ usa (70),
+ yemen (71)
+ }
+
+AprisaXEFXSPMLevel ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION "Type of SPM level."
+ SYNTAX INTEGER { l0 (0),
+ l1 (1),
+ l2 (2),
+ l3 (3),
+ l4 (4),
+ l5 (5),
+ l6 (6),
+ l7 (7),
+ l8 (8),
+ l9 (9),
+ l10 (10),
+ l11 (11),
+ l12 (12),
+ l13 (13),
+ l14 (14),
+ l15 (15),
+ l16 (16),
+ l17 (17),
+ l18 (18),
+ l19 (19),
+ l20 (20),
+ l21 (21),
+ l22 (22),
+ l23 (23),
+ l24 (24),
+ l25 (25),
+ l26 (26),
+ l27 (27)
+ }
+
+AprisaXEFXSPathMute ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION "The status of the Path Mute function for the DFXS."
+ SYNTAX INTEGER { noMute (0),
+ muteRx (16),
+ muteTx (32)
+ }
+
+AprisaXETableCommand ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION "A command sent to add or delete table entries."
+ SYNTAX INTEGER { noCommand (0),
+ addCommand (1),
+ deleteCommand (2)
+ }
+
+AprisaXEQuadJetConnectionType ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION "Indicates whether a connection is for data or CAS signalling."
+ SYNTAX INTEGER { dataConnection (0),
+ casConnection (1),
+ tsLoopbackConnection (2)
+ }
+
+AprisaXEInterfaceCnxnType ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION "This describes the interface connection type. The
+ values are arbitrary and are primarily used to
+ identify instances of aggregate connections."
+ SYNTAX INTEGER { none(0), -- Unused connection
+ unframedE1Intf (1),
+ unframedT1Intf (2),
+ aggregateIntf (3),
+ fourWireIntf (4),
+ fxoIntf (5),
+ fxsIntf (6),
+ v24AsyncIntf (7),
+ custEthernetIntf (8),
+ mgmtEthernetIntf (9),
+ syncSerialIntf (10),
+ -- aggregateCasIntf (11),
+ hssControlIntf (12),
+ dropAndInsertIntf (13)
+ }
+
+AprisaXEConnectionID ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION "Represents a unique cross-connection identifier."
+ SYNTAX INTEGER ( 0..65535 )
+
+AprisaXEPcmMode ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION "The current PCM mode."
+ SYNTAX INTEGER { pcm31c (0),
+ pcm30c (1),
+ pcm31 (2),
+ pcm30 (3),
+ unframed (4),
+ off (5), -- The port is off
+ t1sf (6),
+ t1esf (7),
+ t1sf4 (8),
+ t1esf16 (10)
+ }
+
+AprisaXESerialEquipmentMode ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION "Mode describing the behaviour of the serial interface."
+ SYNTAX INTEGER { noCable (0),
+ dceMode (1),
+ dteMode (2)
+ }
+
+AprisaXEHssSerialMode ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION "Mode describing the type of serial interface, e.g. V.35."
+ SYNTAX INTEGER { v11Mode (0),
+ rs530AMode (1),
+ rs530Mode (2),
+ x21Mode (3),
+ v35Mode (4),
+ rs449v36Mode (5),
+ rs232v28Mode (6),
+ noSerialCable (7)
+ }
+
+AprisaXE2WireSignalState ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION "This indicates the state of the CAS signalling bits
+ as normal, inverted and disabled."
+ SYNTAX INTEGER { fxTransNormal (0),
+ fxTransInvert (1),
+ fxForcedNormal (2),
+ fxForcedInvert (3)
+ }
+
+AprisaXEEthernetPortNumber ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION "Ethernet port numbers."
+ SYNTAX INTEGER { eth1 (1),
+ eth2 (2),
+ eth3 (3),
+ eth4 (4)
+ }
+
+AprisaXEEthernetGroup ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION "Used for Ethernet groupings."
+ SYNTAX INTEGER { user1 (1),
+ user2 (2),
+ user3 (3),
+ user4 (4),
+ userAndMgmt (5)
+ }
+
+AprisaXEEthernetFrameRate ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION "The frame rate limits allowed by the Marvell switch."
+ SYNTAX INTEGER { unlimited (0),
+ limit128kbps (1),
+ limit256kbps (2),
+ limit512kbps (3),
+ limit1Mbps (4),
+ limit2Mbps (5),
+ limit4Mbps (6),
+ limit8Mbps (7)
+ }
+
+AprisaXEEthernetPortPriority ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION "Indicates the bandwidth allocated to a port."
+ SYNTAX INTEGER { fromFrame (0),
+ low (1),
+ medium (3),
+ high (5),
+ vHigh (7)
+ }
+
+AprisaXEEthernetGrouping ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION "Indicates whether Ethernet Grouping is enabled or disabled."
+ SYNTAX INTEGER { ethGroupDisabled (0),
+ ethGroupEnabled (1)
+ }
+
+AprisaXEEthernetPrioQueueScheduling ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION "Indicates the QOS priority scheduling scheme."
+ SYNTAX INTEGER { weighted (0),
+ strict (1)
+ }
+
+AprisaXEEthernetPrioQueueMapping ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION "Indicates the QOS priority mapping scheme."
+ SYNTAX INTEGER { standard (0),
+ cisco (1)
+ }
+
+AprisaXEDefaultAction ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION "Indicates whether, or not, MIB values should be defaulted."
+ SYNTAX INTEGER { dontSetToDefaults (0),
+ setToDefaults (1)
+ }
+
+AprisaXEQuadJetLoopbacks ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION "This indicates the E1 loopback setting on a port;
+ OFF, Line or Radio Facing."
+ SYNTAX INTEGER { e1LoopbacksOff (0),
+ e1LineLoopbackOn (1),
+ e1RadioLoopbackOn (2)
+ }
+
+AprisaXECCActivationStatus ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION "Indicates the current state of cross connect
+ activation for the port."
+ SYNTAX INTEGER { ccActivated (0),
+ ccActivationFailed (1),
+ ccBusyActivating (2)
+ }
+
+AprisaXESysSoftwareStatus ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION "Indicates consistency of inventory file and system software."
+ SYNTAX INTEGER { sysInventoryConsistent (0),
+ sysInventoryInconsistent (1)
+ }
+
+AprisaXEPSCActiveRadio ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION "This indicates the active radio for the PSC card."
+ SYNTAX INTEGER { autoSelect (1),
+ manualA (0),
+ manualB (2)
+ }
+
+AprisaXEPSCActiveTx ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION "This indicates the active transmitter card."
+ SYNTAX INTEGER { TxA (0),
+ TxB (1)
+ }
+
+END
generated by cgit v1.2.3 (git 2.46.0) at 2026-02-26 11:31:35 +0000