summaryrefslogtreecommitdiff
path: root/MIBS/zyxel/ZYXEL-SAM1216
diff options
context:
space:
mode:
authorDavid Leutgeb <david.leutgeb@mannundmouse.com>2023-12-05 12:25:34 +0100
committerDavid Leutgeb <david.leutgeb@mannundmouse.com>2023-12-05 12:25:34 +0100
commit98a672123c7872f6b9b75a9a2b6bb3aea504de6a (patch)
tree9b13bd7f563c3198047bd359195327cf28b3caf0 /MIBS/zyxel/ZYXEL-SAM1216
downloadmibs-98a672123c7872f6b9b75a9a2b6bb3aea504de6a.tar.gz
mibs-98a672123c7872f6b9b75a9a2b6bb3aea504de6a.zip
Initial commitHEADmain
Diffstat (limited to 'MIBS/zyxel/ZYXEL-SAM1216')
-rw-r--r--MIBS/zyxel/ZYXEL-SAM12165466
1 files changed, 5466 insertions, 0 deletions
diff --git a/MIBS/zyxel/ZYXEL-SAM1216 b/MIBS/zyxel/ZYXEL-SAM1216
new file mode 100644
index 0000000..4a75c0c
--- /dev/null
+++ b/MIBS/zyxel/ZYXEL-SAM1216
@@ -0,0 +1,5466 @@
+-- ZyXEL Communications Corporation
+-- Private Enterprise MIB definition
+
+-- $Log: zyxel-SAM1216.mib $
+-- Revision 1.5 2010/03/17 10:24:51 cylien
+-- Revision 1.4 2010/03/11 02:14:52 cylien
+-- Revision 1.3 2009/10/09 02:10:10 cylien
+-- Revision 1.2 2009/07/28 09:00:42 lbr
+-- Revision 1.1 2008/07/11 09:36:01 maverick
+-- Initial revision
+-- Revision 1.3 2007/11/26 06:34:38 kenny
+-- Revision 1.2 2007/09/19 02:44:42 niceguy
+-- Revision 1.1 2006/08/28 05:32:54 kenny
+-- Initial revision
+-- Revision 1.5 2006/08/23 02:14:33 niceguy
+-- Revision 1.4 2006/08/04 07:48:05 niceguy
+-- Revision 1.3 2006/07/19 07:20:53 niceguy
+-- Revision 1.2 2006/07/07 02:38:09 niceguy
+-- Revision 1.1 2006/06/08 09:51:36 niceguy
+-- Initial revision
+-- Initial revision
+
+
+ZYXEL-SAM1216 DEFINITIONS ::= BEGIN
+
+ IMPORTS
+
+ enterprises
+ FROM RFC1155-SMI
+ ifIndex, DisplayString, PhysAddress
+ FROM RFC1213-MIB
+ RowStatus
+ FROM SNMPv2-TC
+ dot1qVlanIndex, VlanIndex, PortList
+ FROM Q-BRIDGE-MIB
+ MacAddress, Timeout, BridgeId
+ FROM BRIDGE-MIB;
+
+ zyxel OBJECT IDENTIFIER ::= { enterprises 890 }
+ products OBJECT IDENTIFIER ::= { zyxel 1 }
+ accessSwitch OBJECT IDENTIFIER ::= { products 5 }
+ sesSeries OBJECT IDENTIFIER ::= { accessSwitch 5 }
+ sam1216-22 OBJECT IDENTIFIER ::= { sesSeries 6 }
+
+-- acl OBJECT IDENTIFIER ::= { sam1216-22 1 }
+ alarmconf OBJECT IDENTIFIER ::= { sam1216-22 2 }
+-- config OBJECT IDENTIFIER ::= { sam1216-22 3 }
+-- diagnostic OBJECT IDENTIFIER ::= { sam1216-22 4 }
+-- ipconf OBJECT IDENTIFIER ::= { sam1216-22 5 }
+-- lcm OBJECT IDENTIFIER ::= { sam1216-22 6 }
+ multicast OBJECT IDENTIFIER ::= { sam1216-22 7 }
+ port OBJECT IDENTIFIER ::= { sam1216-22 8 }
+-- profile OBJECT IDENTIFIER ::= { sam1216-22 9 }
+ switch OBJECT IDENTIFIER ::= { sam1216-22 10 }
+ sys OBJECT IDENTIFIER ::= { sam1216-22 11 }
+ trap OBJECT IDENTIFIER ::= { sam1216-22 12 }
+ statistics OBJECT IDENTIFIER ::= { sam1216-22 13 }
+ clear OBJECT IDENTIFIER ::= { sam1216-22 14 }
+----------------------------------------
+-- acl
+----------------------------------------
+-- Standalone IP DSLAM puts all ACL features in 'switch', from OID 51
+
+ dhcp OBJECT IDENTIFIER ::= { switch 51 }
+-- dot1x OBJECT IDENTIFIER ::= { switch 52 }
+ macfilter OBJECT IDENTIFIER ::= { switch 53 }
+-- pktfilter OBJECT IDENTIFIER ::= { switch 54 }
+ dhcpSnoop OBJECT IDENTIFIER ::= { switch 55 }
+ acl OBJECT IDENTIFIER ::= { switch 56 }
+ pppoeAgent OBJECT IDENTIFIER ::= { switch 57 }
+
+--------------------
+-- DHCP Relay
+--------------------
+
+ dhcpRelayEnable OBJECT-TYPE
+ SYNTAX INTEGER {
+ auto(1),
+ both(2),
+ disable(3)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Enable/disable DHCP relay Option82 function."
+ ::= { dhcp 1 }
+
+ dhcpRelay82Table OBJECT-TYPE
+ SYNTAX SEQUENCE OF DhcpRelay82Entry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table that contains DHCP Relay configuration."
+ ::= { dhcp 2 }
+
+ dhcpRelay82Entry OBJECT-TYPE
+ SYNTAX DhcpRelay82Entry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The entry of DHCP Relay table."
+ INDEX { dot1qVlanIndex }
+ ::= { dhcpRelay82Table 1 }
+
+ DhcpRelay82Entry ::=
+ SEQUENCE {
+ dhcpRelay82PrimaryServer IpAddress,
+ dhcpRelay82SecondaryServer IpAddress,
+ dhcpRelay82ActiveServer INTEGER,
+ dhcpRelay82Enable INTEGER,
+ dhcpRelay82Info DisplayString,
+ dhcpRelay82RelayMode INTEGER,
+ dhcpRelay82Suboption2Enable INTEGER,
+ dhcpRelay82Suboption2Info DisplayString,
+ dhcpRelay82EntryEnable INTEGER,
+ dhcpRelay82EntryOptionMode INTEGER
+ }
+
+ dhcpRelay82PrimaryServer OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The IP address of the DHCP Relay primary server."
+ ::= { dhcpRelay82Entry 1 }
+
+ dhcpRelay82SecondaryServer OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The IP address of the DHCP Relay secondary server."
+ ::= { dhcpRelay82Entry 2 }
+
+ dhcpRelay82ActiveServer OBJECT-TYPE
+ SYNTAX INTEGER {
+ primary(1),
+ secondary(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The current active DHCP Relay server."
+ ::= { dhcpRelay82Entry 3 }
+
+
+ dhcpRelay82Enable OBJECT-TYPE
+ SYNTAX INTEGER {
+ enable(1),
+ disable(2)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Enable/disable DHCP relay and Option82 function."
+ ::= { dhcpRelay82Entry 4 }
+
+ dhcpRelay82Info OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..23))
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "User specific Option82 information."
+ ::= { dhcpRelay82Entry 5 }
+
+ dhcpRelay82RelayMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ auto(1),
+ both(2)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "DHCP relay mode."
+ ::= { dhcpRelay82Entry 6 }
+
+
+ dhcpRelay82Suboption2Enable OBJECT-TYPE
+ SYNTAX INTEGER {
+ enable(1),
+ disable(2)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Enable/disable Option 82 sub-option 2."
+ ::= { dhcpRelay82Entry 8 }
+
+ dhcpRelay82Suboption2Info OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "User specified information for Option 82 sub-option 2."
+ ::= { dhcpRelay82Entry 9 }
+
+ dhcpRelay82EntryEnable OBJECT-TYPE
+ SYNTAX INTEGER {
+ auto(1),
+ both(2),
+ disable(3)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Enable/disable DHCP Relay"
+ ::= { dhcpRelay82Entry 10 }
+
+ dhcpRelay82EntryOptionMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ private(1),
+ tr101(2),
+ tr101WithVlan(3)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Option82 format."
+ ::= { dhcpRelay82Entry 11 }
+
+ dhcpRelayOption82Sub1Info OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..23))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "User specific Option82 subOption1 (Agent circuit ID) information."
+ ::= { dhcp 3 }
+
+ maxNumOfDhcpRelay82Conf OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The maximum number of rows that can be created in dhcpRelay82Table."
+ ::= { dhcp 4 }
+
+ dhcpRelayOption82Sub1Enable OBJECT-TYPE
+ SYNTAX INTEGER {
+ enable(1),
+ disable(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Enable/disable DHCP relay Option82 subOption1 (Agent Circuit ID) function."
+ ::= { dhcp 5 }
+
+ dhcpRelayOption82Sub2Info OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..23))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "User specific Option82 subOption2 (Agent Remote ID) information."
+ ::= { dhcp 6 }
+
+ dhcpRelayOption82Sub2Enable OBJECT-TYPE
+ SYNTAX INTEGER {
+ enable(1),
+ disable(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Enable/disable DHCP relay Option82 subOption2 (Agent Remote ID) function."
+ ::= { dhcp 7 }
+
+--------------------
+-- MAC Filter
+--------------------
+
+-- MAC Filter Port Table
+
+ macFilterPortTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF MacFilterPortEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table includes the status of mac filtering for each port."
+ ::= { macfilter 1 }
+
+ macFilterPortEntry OBJECT-TYPE
+ SYNTAX MacFilterPortEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry in macFilterPortTable."
+ INDEX { ifIndex }
+ ::= { macFilterPortTable 1 }
+
+ MacFilterPortEntry ::=
+ SEQUENCE {
+ macFilterPortEnable INTEGER,
+ macFilterPortMacCount INTEGER,
+ macFilterPortFilterMode INTEGER
+ }
+
+ macFilterPortEnable OBJECT-TYPE
+ SYNTAX INTEGER {
+ enableMacFilter(1),
+ enableMacCount(2),
+-- enableOuiFilter(3),
+ disable(4),
+ enableMacFilterAndMacCount(5)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Enable/disable MAC filtering for the port."
+ ::= { macFilterPortEntry 1 }
+
+ macFilterPortMacCount OBJECT-TYPE
+ SYNTAX INTEGER (1..128)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The total number of MAC addresses allowed for the port."
+ ::= { macFilterPortEntry 2 }
+
+ macFilterPortFilterMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ accept(1),
+ deny(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The mac filter mode (accept or deny) for the port."
+ ::= { macFilterPortEntry 3 }
+
+ maxNumOfMacFiltersInSystem OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The max number of mac filters supported in the system."
+ ::= { macfilter 2 }
+
+ maxNumOfMacFiltersPerPort OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The max number of mac filters supported per port."
+ ::= { macfilter 3 }
+
+ currNumOfMacFiltersInSystem OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The current number of mac filters in the system."
+ ::= { macfilter 4 }
+
+-- MAC Table
+
+ macFilterTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF MacFilterEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table that contains the mac filter addresses."
+ ::= { macfilter 5 }
+
+ macFilterEntry OBJECT-TYPE
+ SYNTAX MacFilterEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The entry of macFilterTable."
+ INDEX { ifIndex, macFilterAddr }
+ ::= { macFilterTable 1 }
+
+ MacFilterEntry ::=
+ SEQUENCE {
+ macFilterAddr PhysAddress,
+ macFilterRowStatus RowStatus
+ }
+
+ macFilterAddr OBJECT-TYPE
+ SYNTAX PhysAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The mac address which can pass through or be rejected from the port."
+ ::= { macFilterEntry 1 }
+
+ macFilterRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The row status of the entry."
+ ::= { macFilterEntry 2 }
+
+-- Batch Set for MAC Filter
+
+ macfilterBatchSet OBJECT IDENTIFIER ::= { macfilter 6 }
+
+ macfilterTarget OBJECT-TYPE
+ SYNTAX OCTET STRING
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This managed object is used for identify the target on which
+ the port configuration should be performed. The target is encoded as:
+ Byte 1: 0, Reserved(chassis)
+ Byte 2~3: 0, Reserved(slot)
+ Byte 4: 0, reserved
+ Byte 5~11:each octet specifies a set of eight ports, with the first
+ octet specifying ports 1 through 8, etc."
+ ::= { macfilterBatchSet 1 }
+
+ macfilterOps OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The corresponding bit is set to 1 to start the operation.
+ The various bit positions are:
+ BIT 1: enable mac filter
+ BIT 2: enable mac count filter
+ BIT 3: disable mac filter
+ BIT 4: set mac count
+ BIT 5: disable mac count filter."
+ ::= { macfilterBatchSet 2 }
+
+ macFilterMacCountForBatchSet OBJECT-TYPE
+ SYNTAX INTEGER (1..128)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The total number of MAC addresses allowed for a port."
+ ::= { macfilterBatchSet 3 }
+
+
+-- OUI Filter Table
+
+ ouiFilterTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF OuiFilterEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table that contains the OUI filter addresses."
+ ::= { macfilter 7 }
+
+ ouiFilterEntry OBJECT-TYPE
+ SYNTAX OuiFilterEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The entry of ouiFilterTable."
+ INDEX { ifIndex, ouiFilterAddr }
+ ::= { ouiFilterTable 1 }
+
+ OuiFilterEntry ::=
+ SEQUENCE {
+ ouiFilterAddr OCTET STRING,
+ ouiFilterRowStatus RowStatus
+ }
+
+ ouiFilterAddr OBJECT-TYPE
+ SYNTAX OCTET STRING
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The first three bytes of the mac address which can pass through or be rejected from the port."
+ ::= { ouiFilterEntry 1 }
+
+ ouiFilterRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The row status of the entry."
+ ::= { ouiFilterEntry 2 }
+
+ maxNumOfOuiFiltersPerPort OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The max number of OUI filters supported per port."
+ ::= { macfilter 8 }
+
+
+ ouiFilterPortTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF OuiFilterPortEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table includes the status of oui filtering for each port."
+ ::= { macfilter 9 }
+
+ ouiFilterPortEntry OBJECT-TYPE
+ SYNTAX OuiFilterPortEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry in macFilterPortTable."
+ INDEX { ifIndex }
+ ::= { ouiFilterPortTable 1 }
+
+ OuiFilterPortEntry ::=
+ SEQUENCE {
+ ouiFilterPortEnable INTEGER,
+ ouiFilterPortFilterMode INTEGER
+ }
+
+
+ ouiFilterPortEnable OBJECT-TYPE
+ SYNTAX INTEGER {
+ enableOuiFilter(1),
+ disable(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Enable/disable oui filtering for the port."
+ ::= { ouiFilterPortEntry 1 }
+
+
+
+ ouiFilterPortFilterMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ accept(1),
+ deny(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The oui filter mode (accept or deny) for the port."
+ ::= { ouiFilterPortEntry 2 }
+--------------------
+-- DHCP Snoop
+--------------------
+
+-- dhcpSnoopPortTable
+
+ dhcpSnoopPortTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF DhcpSnoopPortEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table includes DHCP snooping enable/disable for each port."
+ ::= { dhcpSnoop 1 }
+
+ dhcpSnoopPortEntry OBJECT-TYPE
+ SYNTAX DhcpSnoopPortEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry of dhcpSnoopPortTable."
+ INDEX { ifIndex }
+ ::= { dhcpSnoopPortTable 1 }
+
+ DhcpSnoopPortEntry ::=
+ SEQUENCE {
+ dhcpSnoopEnable INTEGER
+ }
+
+ dhcpSnoopEnable OBJECT-TYPE
+ SYNTAX INTEGER {
+ enable(1),
+ disable(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Enable/disable DHCP snooping for a port."
+ ::= { dhcpSnoopPortEntry 1 }
+
+-- dhcpSnoopOperation
+
+ dhcpSnoopTarget OBJECT-TYPE
+ SYNTAX OCTET STRING
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This managed object is used for identify the target on which
+ the operation should be performed. The target is encoded as:
+ Byte 1: the octet specifies a set of eight chassis, chassis 0 through 7
+ Byte 2~3: each octet specifies a set of eight slots, with the
+ first octet specifying slots 1 through 8 and the second
+ octet specifying slots 9 through 16.
+ Byte 4: reserved
+ Byte 5~11:each octet specifies a set of eight ports, with the first
+ octet specifying ports 1 through 8, etc."
+ ::= { dhcpSnoop 2 }
+
+ dhcpSnoopOps OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The corresponding bit is set to 1 to start the operation.
+ The various bit positions are:
+ BIT 1: DHCP snooping table flush."
+ ::= { dhcpSnoop 3 }
+
+
+-- dhcpStaticTable
+
+ dhcpStaticTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF DhcpStaticEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table defines DHCP static IP addresses."
+ ::= { dhcpSnoop 4 }
+
+ dhcpStaticEntry OBJECT-TYPE
+ SYNTAX DhcpStaticEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry of dhcpStaticTable."
+ INDEX { ifIndex, dhcpStaticIpAddr }
+ ::= { dhcpStaticTable 1 }
+
+ DhcpStaticEntry ::=
+ SEQUENCE {
+ dhcpStaticIpAddr IpAddress,
+ dhcpStaticRowStatus RowStatus
+ }
+
+ dhcpStaticIpAddr OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The IP address which can pass through the port."
+ ::= { dhcpStaticEntry 1 }
+
+ dhcpStaticRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Row status of the table entry."
+ ::= { dhcpStaticEntry 2 }
+
+ maxNumOfDhcpStaticIp OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The maximum number of DHCP static IP addresses which can be created for a port."
+ ::= { dhcpSnoop 5 }
+
+ dhcpSnoopLan2lanEnable OBJECT-TYPE
+ SYNTAX INTEGER {
+ enable(1),
+ disable(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Enable/disable DHCP snoop lan2lan function."
+ ::= { dhcpSnoop 6 }
+
+-- acl
+--aclSetTable
+ aclSetTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AclSetEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "aclsetTable."
+ ::= { acl 1 }
+
+ aclSetEntry OBJECT-TYPE
+ SYNTAX AclSetEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry of aclSetTable."
+ INDEX { ifIndex, aclSetVpi, aclSetVci, aclSetProfileName }
+ ::= { aclSetTable 1 }
+
+ AclSetEntry ::=
+ SEQUENCE {
+ aclSetVpi INTEGER,
+ aclSetVci INTEGER,
+ aclSetProfileName DisplayString,
+ aclSetRowStatus RowStatus
+ }
+
+ aclSetVpi OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "VPI value"
+ ::= { aclSetEntry 1 }
+
+ aclSetVci OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "VCI value"
+ ::= { aclSetEntry 2 }
+
+ aclSetProfileName OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "ACL Profile name"
+ ::= { aclSetEntry 3 }
+
+ aclSetRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "RowStatus of aclSetEntry"
+ ::= { aclSetEntry 4 }
+
+--aclProfileTable
+
+ aclProfileTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AclProfileEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "aclProfileTable."
+ ::= { acl 2 }
+
+ aclProfileEntry OBJECT-TYPE
+ SYNTAX AclProfileEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry of aclProfileTable."
+ INDEX { aclProfileRuleName }
+ ::= { aclProfileTable 1 }
+
+ AclProfileEntry ::=
+ SEQUENCE {
+ aclProfileRuleName DisplayString,
+ aclProfileRuleNumber INTEGER,
+ aclProfileActionNumber INTEGER,
+ aclProfileRuleParamMask INTEGER,
+ aclProfileRuleEtype INTEGER,
+ aclProfileRuleVid INTEGER,
+ aclProfileRuleSmac PhysAddress,
+ aclProfileRuleDmac PhysAddress,
+ aclProfileRulePriority INTEGER,
+ aclProfileRuleProtocol INTEGER,
+ aclProfileRuleSrcIP IpAddress,
+ aclProfileRuleSrcIPMask INTEGER,
+ aclProfileRuleDestIP IpAddress,
+ aclProfileRuleDestIPMask INTEGER,
+ aclProfileRuleStartTos INTEGER,
+ aclProfileRuleEndTos INTEGER,
+ aclProfileRuleSrcStartPort INTEGER,
+ aclProfileRuleSrcEndPort INTEGER,
+ aclProfileRuleDestStartPort INTEGER,
+ aclProfileRuleDestEndPort INTEGER,
+ aclProfileActionRate INTEGER,
+ aclProfileActionrvlan INTEGER,
+ aclProfileActionrpri INTEGER,
+ aclProfileRowStatus RowStatus
+ }
+
+ aclProfileRuleName OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Profile rule name"
+ ::= { aclProfileEntry 1 }
+
+ aclProfileRuleNumber OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The managed object is for acl profile rule configuration.
+ etype <etype> vlan <vid> (1),
+ etype <etype> smac <mac> (2),
+ etype <etype> dmac <mac> (3),
+ vlan <vid> smac <mac> (4),
+ vlan <vid> dmac <mac> (5),
+ smac <mac> dmac <mac> (6),
+ vlan <vid> priority <priority> (7),
+ etype <etype> (8),
+ vlan <vid> (9),
+ smac <mac> (10),
+ dmac <mac> (11),
+ priority <priority> (12),
+ protocol <protocol> (13),
+ {srcip <ip>/<mask>{|dstip <ip>/<mask>{|tos <stos> <etos>{|srcport <sport> <eport> {|dstport <sport> <eport>}}}}} (14) "
+ ::= { aclProfileEntry 2 }
+
+ aclProfileActionNumber OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Profile action number.
+ Bit 1: rate
+ Bit 2: rvlan
+ Bit 3: rpri
+ Bit 4: deny
+
+ Bit 1, Bit 2 & Bit 3 can multiple selection."
+ ::= { aclProfileEntry 3 }
+
+ aclProfileRuleParamMask OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Profile rule parameter mask.
+
+ BIT 1: srcip <ip>/<mask>
+ BIT 2: dstip <ip>/<mask>
+ BIT 3: tos <stos> <etos>
+ BIT 4: srcport <sport> <eport>
+ BIT 5: dstport <sport> <eport>
+ "
+ ::= { aclProfileEntry 4 }
+
+ aclProfileRuleEtype OBJECT-TYPE
+ SYNTAX INTEGER (0..65535)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Profile rule etype
+ "
+ ::= { aclProfileEntry 5 }
+
+ aclProfileRuleVid OBJECT-TYPE
+ SYNTAX INTEGER (1..4094)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Profile rule vid"
+ ::= { aclProfileEntry 6 }
+
+ aclProfileRuleSmac OBJECT-TYPE
+ SYNTAX PhysAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Profile rule source MAC"
+ ::= { aclProfileEntry 7 }
+
+ aclProfileRuleDmac OBJECT-TYPE
+ SYNTAX PhysAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Profile rule destination MAC"
+ ::= { aclProfileEntry 8 }
+
+ aclProfileRulePriority OBJECT-TYPE
+ SYNTAX INTEGER (1..7)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Profile rule priority"
+ ::= { aclProfileEntry 9 }
+
+ aclProfileRuleProtocol OBJECT-TYPE
+ SYNTAX INTEGER (0..65535)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Profile rule protocol.
+ icmp(1),igmp(2),ip(4),tcp(6),
+ udp(17),gre(47),ospf(89),
+ other ptype"
+ ::= { aclProfileEntry 10 }
+
+ aclProfileRuleSrcIP OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Profile rule source IP"
+ ::= { aclProfileEntry 11 }
+
+ aclProfileRuleSrcIPMask OBJECT-TYPE
+ SYNTAX INTEGER (0..32)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The subnet mask of source IP mask"
+ ::= { aclProfileEntry 12 }
+
+ aclProfileRuleDestIP OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Profile rule source IP"
+ ::= { aclProfileEntry 13 }
+
+ aclProfileRuleDestIPMask OBJECT-TYPE
+ SYNTAX INTEGER (0..32)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The subnet mask of dest IP mask"
+ ::= { aclProfileEntry 14 }
+
+ aclProfileRuleStartTos OBJECT-TYPE
+ SYNTAX INTEGER (0..255)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Profile rule start type of service"
+ ::= { aclProfileEntry 15 }
+
+ aclProfileRuleEndTos OBJECT-TYPE
+ SYNTAX INTEGER (0..255)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Profile rule end type of service"
+ ::= { aclProfileEntry 16 }
+
+ aclProfileRuleSrcStartPort OBJECT-TYPE
+ SYNTAX INTEGER (0..65535)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Profile rule source start port"
+ ::= { aclProfileEntry 17 }
+
+ aclProfileRuleSrcEndPort OBJECT-TYPE
+ SYNTAX INTEGER (0..65535)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Profile rule source end port"
+ ::= { aclProfileEntry 18 }
+
+ aclProfileRuleDestStartPort OBJECT-TYPE
+ SYNTAX INTEGER (0..65535)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Profile rule destination start port"
+ ::= { aclProfileEntry 19 }
+
+ aclProfileRuleDestEndPort OBJECT-TYPE
+ SYNTAX INTEGER (0..65535)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Profile rule destination end port"
+ ::= { aclProfileEntry 20 }
+
+ aclProfileActionRate OBJECT-TYPE
+ SYNTAX INTEGER (1..65535)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Profile action to replace to this rate"
+ ::= { aclProfileEntry 21 }
+
+ aclProfileActionrvlan OBJECT-TYPE
+ SYNTAX INTEGER (1..4094)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Profile action to replace to this vlan"
+ ::= { aclProfileEntry 22 }
+
+ aclProfileActionrpri OBJECT-TYPE
+ SYNTAX INTEGER (1..7)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Profile action to replace to this priority"
+ ::= { aclProfileEntry 23 }
+
+ aclProfileRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The row status of the entry."
+ ::= { aclProfileEntry 24 }
+
+--------------------
+-- PPPoE Agent
+--------------------
+
+-- pppoeAgentTable
+
+ pppoeAgentTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF PppoeAgentEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table that contains PPPoE DHCP Relay configuration."
+ ::= { pppoeAgent 1 }
+
+ pppoeAgentEntry OBJECT-TYPE
+ SYNTAX PppoeAgentEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry of pppoeAgentTable."
+ INDEX { dot1qVlanIndex }
+ ::= { pppoeAgentTable 1 }
+
+ PppoeAgentEntry ::=
+ SEQUENCE {
+ pppoeAgentEnable INTEGER,
+ pppoeAgentInfo DisplayString,
+ pppoeAgentRowStatus RowStatus,
+ pppoeAgentOptionMode INTEGER
+ }
+
+ pppoeAgentEnable OBJECT-TYPE
+ SYNTAX INTEGER {
+ enable(1),
+ disable(2)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Enable/disable DHCP relay and Option82 function."
+ ::= { pppoeAgentEntry 1 }
+
+ pppoeAgentInfo OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..23))
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "User specific Option82 information."
+ ::= { pppoeAgentEntry 2 }
+
+ pppoeAgentRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Row status of the table entry."
+ ::= { pppoeAgentEntry 3 }
+
+ pppoeAgentOptionMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ private(1),
+ tr101(2),
+ tr101WithVlan(3)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Option82 format."
+ ::= { pppoeAgentEntry 4 }
+
+
+ maxNumOfPppoeAgentConf OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The maximum number of rows that can be created in pppoeAgentTable."
+ ::= { pppoeAgent 2 }
+
+----------------------------------------
+-- alarmconf
+----------------------------------------
+
+ alarmOps OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The manager sets the corresponding bit value to 1 to start the operation
+ and the agent clears the object to zero when the operation is successfully completed.
+ The various bit positions are:
+ BIT 1: clear
+ BIT 2: cutoff"
+ ::= { alarmconf 1 }
+
+-- Alarm Conf Table
+
+ alarmConfTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AlarmConfEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table includes alarm configuration."
+ ::= { alarmconf 2 }
+
+ alarmConfEntry OBJECT-TYPE
+ SYNTAX AlarmConfEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry in alarmConfTable."
+ INDEX { alarmConfId }
+ ::= { alarmConfTable 1 }
+
+ AlarmConfEntry ::=
+ SEQUENCE {
+ alarmConfId INTEGER,
+ alarmConfFacility INTEGER,
+ alarmConfTarget INTEGER,
+ alarmConfSeverity INTEGER,
+ alarmConfClearable INTEGER
+ }
+
+ alarmConfId OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "5000: linkUp
+ 5001: linkDown
+ 5002: shdslLoopAttenCrossing
+ 5003: shdslSNRMarginCrossing
+ 5004: shdslPerfESThresh
+ 5005: shdslPerfSESThresh
+ 5006: shdslPerfCRCAnomaliesThresh
+ 5007: shdslPerfLOSWSThresh
+ 5008: shdslPerfUASThresh
+ 10000: eqptVoltageError
+ 10001: eqptTempError
+ 10002: eqptHwRTCError
+ 10003: eqptHWMonitorFailed
+ 10004: coldStart
+ 10005: warmStart
+ 15000: sysReboot
+ 15001: sysAlarmCutoffEnabled
+ 15002: sysAlarmClearEnabled
+ 15003: sysLoginFailed
+ 15004: sysMacAntiSpoofing
+ 20000: enetlinkUp
+ 20001: enetlinkDown"
+ ::= { alarmConfEntry 1 }
+
+ alarmConfFacility OBJECT-TYPE
+ SYNTAX INTEGER {
+ local1(1),
+ local2(2),
+ local3(3),
+ local4(4),
+ local5(5),
+ local6(6),
+ local7(7)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Alarm facility."
+ ::= { alarmConfEntry 2 }
+
+ alarmConfTarget OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The destination which alarms are reported to. Set the bit to 1 to enable the target.
+ BIT 1: snmp trap
+ BIT 2: syslog"
+ ::= { alarmConfEntry 3 }
+
+ alarmConfSeverity OBJECT-TYPE
+ SYNTAX INTEGER {
+ critical(1),
+ major(2),
+ minor(3),
+ info(4)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Alarm severity"
+ ::= { alarmConfEntry 4 }
+
+ alarmConfClearable OBJECT-TYPE
+ SYNTAX INTEGER {
+ clearable(1),
+ unclearable(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Setting the object to one indicates that the alarm is to be cleared when user submits alarm clear."
+ ::= { alarmConfEntry 5 }
+
+-- Alarm Current Table
+
+ alarmCurrTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AlarmCurrEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table includes current alarm information."
+ ::= { alarmconf 3 }
+
+ alarmCurrEntry OBJECT-TYPE
+ SYNTAX AlarmCurrEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry in alarmCurrTable."
+ INDEX { alarmCurrIndex }
+ ::= { alarmCurrTable 1 }
+
+ AlarmCurrEntry ::=
+ SEQUENCE {
+ alarmCurrIndex INTEGER,
+ alarmCurrOccurTime TimeTicks,
+ alarmCurrTrapOid OBJECT IDENTIFIER,
+ alarmCurrParam1 INTEGER,
+ alarmCurrParam2 INTEGER,
+ alarmCurrParam3 INTEGER,
+ alarmCurrParam4 INTEGER,
+ alarmCurrParam5 INTEGER,
+ alarmCurrParam6 INTEGER,
+ alarmCurrParam7 INTEGER,
+ alarmCurrParam8 INTEGER,
+ alarmCurrTimeDescr DisplayString,
+ alarmCurrSeverity INTEGER,
+ alarmCurrDescr DisplayString
+ }
+
+ alarmCurrIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Index of the alarm."
+ ::= { alarmCurrEntry 1 }
+
+ alarmCurrOccurTime OBJECT-TYPE
+ SYNTAX TimeTicks
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Alarm occurence time (in hundredths of a second) since the system was last re-initialized."
+ ::= { alarmCurrEntry 2 }
+
+ alarmCurrTrapOid OBJECT-TYPE
+ SYNTAX OBJECT IDENTIFIER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Trap OID of the alarm."
+ ::= { alarmCurrEntry 3 }
+
+ alarmCurrParam1 OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The 1st parameter of the alarm."
+ ::= { alarmCurrEntry 4 }
+
+ alarmCurrParam2 OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The 2nd parameter of the alarm."
+ ::= { alarmCurrEntry 5 }
+
+ alarmCurrParam3 OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The 3rd parameter of the alarm."
+ ::= { alarmCurrEntry 6 }
+
+ alarmCurrParam4 OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The 4th parameter of the alarm."
+ ::= { alarmCurrEntry 7 }
+
+ alarmCurrParam5 OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The 5th parameter of the alarm."
+ ::= { alarmCurrEntry 8 }
+
+ alarmCurrParam6 OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The 6th parameter of the alarm."
+ ::= { alarmCurrEntry 9 }
+
+ alarmCurrParam7 OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The 7th parameter of the alarm."
+ ::= { alarmCurrEntry 10 }
+
+ alarmCurrParam8 OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The 8th parameter of the alarm."
+ ::= { alarmCurrEntry 11 }
+
+ alarmCurrTimeDescr OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The string representation of occurence time (YYYY/MM/DD HH:MM:SS)."
+ ::= { alarmCurrEntry 12 }
+
+ alarmCurrSeverity OBJECT-TYPE
+ SYNTAX INTEGER {
+ critical(1),
+ major(2),
+ minor(3),
+ info(4)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The severity of the alarm."
+ ::= { alarmCurrEntry 13 }
+
+ alarmCurrDescr OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The description of the alarm."
+ ::= { alarmCurrEntry 14 }
+
+-- Alarm Severity Port Table
+
+ alarmSeverityPortTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AlarmSeverityPortEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table includes the configuration of alarm reporting severity threshold for each port."
+ ::= { alarmconf 4 }
+
+ alarmSeverityPortEntry OBJECT-TYPE
+ SYNTAX AlarmSeverityPortEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry in alarmSeverityPortTable."
+ INDEX { ifIndex }
+ ::= { alarmSeverityPortTable 1 }
+
+ AlarmSeverityPortEntry ::=
+ SEQUENCE {
+ severityThresh INTEGER
+ }
+
+ severityThresh OBJECT-TYPE
+ SYNTAX INTEGER {
+ critical(1),
+ major(2),
+ minor(3),
+ info(4)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The minimum alarm severity that is reported."
+ ::= { alarmSeverityPortEntry 1 }
+
+----------------------------------------
+-- diagnostic
+----------------------------------------
+
+-- loopback OBJECT IDENTIFIER ::= { diagnostic 1 }
+-- ldm OBJECT IDENTIFIER ::= { diagnostic 2 }
+-- selt OBJECT IDENTIFIER ::= { diagnostic 3 }
+--
+
+--------------------
+-- selt
+--------------------
+
+-- seltTarget OBJECT-TYPE
+-- SYNTAX INTEGER
+-- MAX-ACCESS read-write
+-- STATUS current
+-- DESCRIPTION
+-- "IfIndex of the port which would be performed single end loopback test."
+-- ::= { selt 1 }
+--
+-- seltOps OBJECT-TYPE
+-- SYNTAX INTEGER
+-- MAX-ACCESS read-write
+-- STATUS current
+-- DESCRIPTION
+-- "The manager sets the object to 1 to start the selt
+-- and the agent clears the object to zero when selt is successfully completed."
+-- ::= { selt 2 }
+--
+-- seltStatus OBJECT-TYPE
+-- SYNTAX DisplayString
+-- MAX-ACCESS read-only
+-- STATUS current
+-- DESCRIPTION
+-- "Status description of the selt result."
+-- ::= { selt 3 }
+--
+-- seltCableType OBJECT-TYPE
+-- SYNTAX INTEGER {
+-- awg24(1),
+-- awg26(2)
+-- }
+-- MAX-ACCESS read-only
+-- STATUS current
+-- DESCRIPTION
+-- "The cable type that selt result indicates."
+-- ::= { selt 4 }
+--
+-- seltLoopEstimateLengthFt OBJECT-TYPE
+-- SYNTAX INTEGER
+-- UNITS "feet"
+-- MAX-ACCESS read-only
+-- STATUS current
+-- DESCRIPTION
+-- "The estimated loop length that selt result indicates."
+-- ::= { selt 5 }
+--
+-- seltLoopEstimateLengthMeter OBJECT-TYPE
+-- SYNTAX INTEGER
+-- UNITS "meter"
+-- MAX-ACCESS read-only
+-- STATUS current
+-- DESCRIPTION
+-- "The estimated loop length that selt result indicates."
+-- ::= { selt 6 }
+
+
+----------------------------------------
+-- multicast
+----------------------------------------
+
+-- staticMulticast OBJECT IDENTIFIER ::= { multicast 2 }
+-- igmpFilter OBJECT IDENTIFIER ::= { multicast 3 }
+ mcastBandwidth OBJECT IDENTIFIER ::= { multicast 4 }
+ igmpCount OBJECT IDENTIFIER ::= { multicast 5 }
+ mvlan OBJECT IDENTIFIER ::= { multicast 6 }
+ queryVid OBJECT IDENTIFIER ::= { multicast 7 }
+
+ igmpEnable OBJECT-TYPE
+ SYNTAX INTEGER {
+ enableProxy(1),
+ enableSnooping(2),
+ disable(3)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Enable/disable IGMP protocol."
+ ::= { multicast 1 }
+
+-- igmpMode OBJECT-TYPE
+-- SYNTAX INTEGER {
+-- aggresive(1),
+-- normal(2)
+-- }
+-- MAX-ACCESS read-write
+-- STATUS current
+-- DESCRIPTION
+-- "setting IGMP with aggresive mode will issue an IGMP report from new active port
+-- when topology change occurs, while normal mode won't."
+-- ::= { multicast 8 }
+
+--------------------
+-- bandwidth
+--------------------
+
+ mcastDefaultBandwidth OBJECT-TYPE
+ SYNTAX INTEGER (1..100000)
+ UNITS "Kbps"
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Default bandwidth requirement for a multicast channel."
+ ::= { mcastBandwidth 1 }
+
+ maxNumOfMcastBw OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The maximum number of row entries that user can create in mcastBwTable."
+ ::= { mcastBandwidth 2 }
+
+-- mcastBwTable
+
+ mcastBwTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF McastBwEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table defines bandwidth budget for a range of multicast IP channels."
+ ::= { mcastBandwidth 3 }
+
+ mcastBwEntry OBJECT-TYPE
+ SYNTAX McastBwEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry of mcastBwTable."
+ INDEX { mcastBwIndex, mcastBwStartIp, mcastBwEndIp }
+ ::= { mcastBwTable 1 }
+
+ McastBwEntry ::=
+ SEQUENCE {
+ mcastBwIndex INTEGER,
+ mcastBwStartIp IpAddress,
+ mcastBwEndIp IpAddress,
+ mcastBwBandwidth INTEGER,
+ mcastBwRowStatus RowStatus
+ }
+
+ mcastBwIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The index which specify the entry."
+ ::= { mcastBwEntry 1 }
+
+ mcastBwStartIp OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The start multicast IP of the bandwidth control range."
+ ::= { mcastBwEntry 2 }
+
+ mcastBwEndIp OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The end multicast IP of the bandwidth control range."
+ ::= { mcastBwEntry 3 }
+
+ mcastBwBandwidth OBJECT-TYPE
+ SYNTAX INTEGER
+ UNITS "Kbps"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The bandwidth budget for the multicast IP channels."
+ ::= { mcastBwEntry 4 }
+
+ mcastBwRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The row status of the entry."
+ ::= { mcastBwEntry 5 }
+
+-- mcastBwPortTable
+
+ mcastBwPortTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF McastBwPortEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table specify the multicast bandwidth control of the port."
+ ::= { mcastBandwidth 4 }
+
+ mcastBwPortEntry OBJECT-TYPE
+ SYNTAX McastBwPortEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry of mcastBwPortTable."
+ INDEX { ifIndex }
+ ::= { mcastBwPortTable 1 }
+
+ McastBwPortEntry ::=
+ SEQUENCE {
+ mcastBwPortEnable INTEGER,
+ mcastBwPortBandwidth INTEGER
+ }
+
+ mcastBwPortEnable OBJECT-TYPE
+ SYNTAX INTEGER {
+ enable(1),
+ disable(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Enable/disable multicast bandwidth control for a port."
+ ::= { mcastBwPortEntry 1 }
+
+ mcastBwPortBandwidth OBJECT-TYPE
+ SYNTAX INTEGER
+ UNITS "Kbps"
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Set bandwidth threshold for a port."
+ ::= { mcastBwPortEntry 2 }
+
+--------------------
+-- igmpCount
+--------------------
+
+ igmpCountPortTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF IgmpCountPortEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table specify the IGMP count limiting of the port."
+ ::= { igmpCount 1 }
+
+ igmpCountPortEntry OBJECT-TYPE
+ SYNTAX IgmpCountPortEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry of igmpCountPortTable."
+ INDEX { ifIndex }
+ ::= { igmpCountPortTable 1 }
+
+ IgmpCountPortEntry ::=
+ SEQUENCE {
+ igmpCountPortEnable INTEGER,
+ igmpCountPortLimit INTEGER
+ }
+
+ igmpCountPortEnable OBJECT-TYPE
+ SYNTAX INTEGER {
+ enable(1),
+ disable(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Enable/disable IGMP count limiting for a port."
+ ::= { igmpCountPortEntry 1 }
+
+ igmpCountPortLimit OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The maximum allowed IGMP report count for a port."
+ ::= { igmpCountPortEntry 2 }
+
+--------------------
+-- mvlan
+--------------------
+
+ maxNumOfMvlan OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The maximum number of row entries that user can create in mvlanTable."
+ ::= { mvlan 1 }
+
+-- mvlanTable
+
+ mvlanTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF MvlanEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table containing static configuration information for
+ each multicast VLAN configured into the device."
+ ::= { mvlan 2 }
+
+ mvlanEntry OBJECT-TYPE
+ SYNTAX MvlanEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry of mvlanTable."
+ INDEX { mvlanIndex }
+ ::= { mvlanTable 1 }
+
+ MvlanEntry ::=
+ SEQUENCE {
+ mvlanIndex VlanIndex,
+ mvlanName DisplayString,
+ mvlanEgressPorts PortList,
+ mvlanUntaggedPorts PortList,
+ mvlanRowStatus RowStatus
+ }
+
+ mvlanIndex OBJECT-TYPE
+ SYNTAX VlanIndex
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The VLAN-ID refering to this VLAN."
+ ::= { mvlanEntry 1 }
+
+ mvlanName OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..31))
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "An administratively assigned string, which may be used to identify the VLAN."
+ ::= { mvlanEntry 2 }
+
+ mvlanEgressPorts OBJECT-TYPE
+ SYNTAX PortList
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The set of ports which are permanently assigned to the
+ egress list for this multicast VLAN."
+ ::= { mvlanEntry 3 }
+
+ mvlanUntaggedPorts OBJECT-TYPE
+ SYNTAX PortList
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The set of ports which should transmit egress packets
+ for this multicast VLAN as untagged."
+ ::= { mvlanEntry 4 }
+
+ mvlanRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object indicates the status of this entry."
+ ::= { mvlanEntry 5 }
+
+-- mvlanTranslateTable
+
+ mvlanTranslateTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF MvlanTranslateEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table that contains multicast to VLAN translation."
+ ::= { mvlan 3 }
+
+ mvlanTranslateEntry OBJECT-TYPE
+ SYNTAX MvlanTranslateEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry of mvlanTranslateTable."
+ INDEX { dot1qVlanIndex, mvlanTranslateIndex }
+ ::= { mvlanTranslateTable 1 }
+
+ MvlanTranslateEntry ::=
+ SEQUENCE {
+ mvlanTranslateIndex INTEGER,
+ mvlanTranslateStartIp IpAddress,
+ mvlanTranslateEndIp IpAddress
+ }
+
+ mvlanTranslateIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The index which specif the entry."
+ ::= { mvlanTranslateEntry 1 }
+
+ mvlanTranslateStartIp OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The start IP of the multicast VLAN translation."
+ ::= { mvlanTranslateEntry 2 }
+
+ mvlanTranslateEndIp OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The end IP of the multicast VLAN translation."
+ ::= { mvlanTranslateEntry 3 }
+
+
+--------------------
+-- queryVid
+--------------------
+
+ maxNumOfQryVid OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The maximum number of row entries that user can create in qryVidConfTable.
+ This object is supported by R1.02 and later versions."
+ ::= { queryVid 1 }
+
+-- qryVidConfTable
+
+ qryVidConfTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF QryVidConfEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table defines statically set VLANs used for response IGMP report.
+ This table is supported by R1.02 and later versions."
+ ::= { queryVid 2 }
+
+ qryVidConfEntry OBJECT-TYPE
+ SYNTAX QryVidConfEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry in qryVidConfTable."
+ INDEX { qryVid }
+ ::= { qryVidConfTable 1 }
+
+ QryVidConfEntry ::=
+ SEQUENCE {
+ qryVid INTEGER,
+ qryVidRowStatus RowStatus
+ }
+
+ qryVid OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "VLAN ID."
+ ::= { qryVidConfEntry 1 }
+
+ qryVidRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object indicates the status of this entry."
+ ::= { qryVidConfEntry 2 }
+
+-- qryVidStatusTable
+
+ qryVidStatusTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF QryVidStatusEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table shows statically set or dynamically learned VLANs used for response IGMP report."
+ ::= { queryVid 3 }
+
+ qryVidStatusEntry OBJECT-TYPE
+ SYNTAX QryVidStatusEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry in qryVidStatusTable."
+ INDEX { qryVid }
+ ::= { qryVidStatusTable 1 }
+
+ QryVidStatusEntry ::=
+ SEQUENCE {
+ qryVidType INTEGER
+ }
+
+ qryVidType OBJECT-TYPE
+ SYNTAX INTEGER {
+ static(1),
+ dynamic(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "VLAN type."
+ ::= { qryVidStatusEntry 1 }
+
+
+ igmpVersion OBJECT-TYPE
+ SYNTAX INTEGER {
+ v2(1),
+ v3(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Setting IGMP version."
+ ::= { multicast 7 }
+----------------------------------------
+-- port
+----------------------------------------
+-- subrPortTable ::= { port 1 }
+-- adslPort OBJECT IDENTIFIER ::= { port 2 }
+ shdslPort OBJECT IDENTIFIER ::= { port 3 }
+ pvc OBJECT IDENTIFIER ::= { port 4 }
+ ppvc OBJECT IDENTIFIER ::= { port 5 }
+ portOperation OBJECT IDENTIFIER ::= { port 6 }
+-- pvcStats OBJECT IDENTIFIER ::= { port 7 }
+ rpvc OBJECT IDENTIFIER ::= { port 8 }
+-- dsBcastDisableTable ::= { port 9 }
+ paepvc OBJECT IDENTIFIER ::= { port 10 }
+ tlspvc OBJECT IDENTIFIER ::= { port 11 }
+
+-- G.bond start from 51
+ gbond OBJECT IDENTIFIER ::= { port 51 }
+
+-- Subscriber Port Table
+
+ subrPortTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF SubrPortEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table includes subscriber attributes for the port."
+ ::= { port 1 }
+
+ subrPortEntry OBJECT-TYPE
+ SYNTAX SubrPortEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry in subrPortTable."
+ INDEX { ifIndex }
+ ::= { subrPortTable 1 }
+
+ SubrPortEntry ::=
+ SEQUENCE {
+ subrPortName DisplayString,
+ subrPortTel DisplayString
+ }
+
+ subrPortName OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..31))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Name of the subscriber."
+ ::= { subrPortEntry 1 }
+
+ subrPortTel OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..15))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Telephone number of the subscriber."
+ ::= { subrPortEntry 2 }
+
+--------------------
+-- adslPort
+--------------------
+
+-- ADSL Line Table
+
+-- adslLineConfTable OBJECT-TYPE
+-- SYNTAX SEQUENCE OF AdslLineConfEntry
+-- MAX-ACCESS not-accessible
+-- STATUS current
+-- DESCRIPTION
+-- "This table includes common attributes describing the ADSL line."
+-- ::= { adslPort 1 }
+--
+--adslLineConfEntry OBJECT-TYPE
+-- SYNTAX AdslLineConfEntry
+-- MAX-ACCESS not-accessible
+-- STATUS current
+-- DESCRIPTION
+-- "An entry in adslLineConfTable."
+-- INDEX { ifIndex }
+-- ::= { adslLineConfTable 1 }
+--
+-- AdslLineConfEntry ::=
+-- SEQUENCE {
+-- adslLineConfAdslMode INTEGER,
+-- adslLineConfAnnexL INTEGER,
+-- adslLineConfAnnexM INTEGER,
+-- adslLineConfAnnexI INTEGER,
+-- adslLineConfOptionMask INTEGER,
+-- adslLineConfPowerMgmt INTEGER,
+-- adslLineConfPowerMode INTEGER,
+-- adslLineConfAturMaxTxPower INTEGER,
+-- adslLineConfAtucMaxTxPower INTEGER,
+-- adslLineConfMaxRxPower INTEGER,
+-- adslLineConfAturCarrierMask OCTET STRING,
+-- adslLineConfAtucCarrierMask0 OCTET STRING,
+-- adslLineConfAtucCarrierMask1 OCTET STRING,
+-- adslLineConfAturInp INTEGER,
+-- adslLineConfAtucInp INTEGER,
+-- adslLineConfL0Time INTEGER,
+-- adslLineConfL2Time INTEGER,
+-- adslLineConfL2ATPR INTEGER,
+-- adslLineConfL2ATPRT INTEGER,
+-- adslLineConfMaxL2Rate INTEGER,
+-- adslLineConfMinL2Rate INTEGER,
+-- adslLineConfL0toL2Rate INTEGER
+-- }
+--
+-- adslLineConfAdslMode OBJECT-TYPE
+-- SYNTAX INTEGER {
+-- gDotLite(1),
+-- gDotDmt(2),
+-- t1Dot413(3),
+-- auto(4),
+-- etsi(5),
+-- adsl2(6),
+-- adsl2Plus(7)
+-- }
+-- MAX-ACCESS read-write
+-- STATUS current
+-- DESCRIPTION
+-- "G.lite and T1.413 are only applicable to annex A board.
+-- ETSI is only applicable to annex B board."
+-- ::= { adslLineConfEntry 1 }
+--
+-- adslLineConfAnnexL OBJECT-TYPE
+-- SYNTAX INTEGER {
+-- enableNarrowMode(1),
+-- enableWideMode(2),
+-- disable(3)
+-- }
+-- MAX-ACCESS read-write
+-- STATUS current
+-- DESCRIPTION
+-- "Enable/disable annex L for the port(Only in AnnexA)."
+-- ::= { adslLineConfEntry 2 }
+--
+-- adslLineConfAnnexM OBJECT-TYPE
+-- SYNTAX INTEGER {
+-- enable(1),
+-- disable(2)
+-- }
+-- MAX-ACCESS read-write
+-- STATUS current
+-- DESCRIPTION
+-- "Enable/disable annex M for the port(For BCM AnnexA solution)."
+-- ::= { adslLineConfEntry 3 }
+--
+-- adslLineConfAnnexI OBJECT-TYPE
+-- SYNTAX INTEGER {
+-- enable(1),
+-- disable(2)
+-- }
+-- MAX-ACCESS read-write
+-- STATUS current
+-- DESCRIPTION
+-- "Enable/disable annex I for the port(For BCM AnnexA solution)."
+-- ::= { adslLineConfEntry 4 }
+--
+-- adslLineConfOptionMask OBJECT-TYPE
+-- SYNTAX INTEGER
+-- MAX-ACCESS read-write
+-- STATUS current
+-- DESCRIPTION
+-- "The semantic for each bit is:
+-- BIT 1 : Disable Trellis
+-- BIT 2 : Disable Reed-Solomon
+-- BIT 3 : Disable upstream bitswap
+-- BIT 4 : Disable downstream bitswap
+-- BIT 5 : Disable 1-bit constellation
+-- BIT 6 : Disable transmit windowing
+-- BIT 7 : Disable s=0.5 support (ADSL1 only)
+-- BIT 8 : Disable G.lite rate limit (ADSL1 only)"
+-- ::= { adslLineConfEntry 5 }
+--
+-- adslLineConfPowerMgmt OBJECT-TYPE
+-- SYNTAX INTEGER {
+-- enableL2(1),
+-- enableL2andL3(2),
+-- disable(3)
+-- }
+-- MAX-ACCESS read-write
+-- STATUS current
+-- DESCRIPTION
+-- "Enable/disable power management for the port."
+-- ::= { adslLineConfEntry 6 }
+--
+-- adslLineConfPowerMode OBJECT-TYPE
+-- SYNTAX INTEGER {
+-- fix(1),
+-- priorityToPower(2),
+-- priorityToRate(3)
+-- }
+-- MAX-ACCESS read-write
+-- STATUS current
+-- DESCRIPTION
+-- "The power mode of the ADSL line."
+-- ::= { adslLineConfEntry 7 }
+--
+-- adslLineConfAturMaxTxPower OBJECT-TYPE
+-- SYNTAX INTEGER (-130..200)
+-- UNITS "tenth dBm"
+-- MAX-ACCESS read-write
+-- STATUS current
+-- DESCRIPTION
+-- "The maximum allowed transmit power of ATU-R."
+-- ::= { adslLineConfEntry 8 }
+--
+-- adslLineConfAtucMaxTxPower OBJECT-TYPE
+-- SYNTAX INTEGER (-50..200)
+-- UNITS "tenth dBm"
+-- MAX-ACCESS read-write
+-- STATUS current
+-- DESCRIPTION
+-- "The maximum allowed transmit power of ATU-C."
+-- ::= { adslLineConfEntry 9 }
+--
+-- adslLineConfMaxRxPower OBJECT-TYPE
+-- SYNTAX INTEGER (-255..255)
+-- UNITS "tenth dBm"
+-- MAX-ACCESS read-write
+-- STATUS current
+-- DESCRIPTION
+-- "The maximum aggregate received power."
+-- ::= { adslLineConfEntry 10 }
+--
+-- adslLineConfAturCarrierMask OBJECT-TYPE
+-- SYNTAX OCTET STRING
+-- MAX-ACCESS read-write
+-- STATUS current
+-- DESCRIPTION
+-- "The upstream carrier mask. For CTLM AnnexA solution, bin is from 0 to 31;
+-- CTLM AnnexB solution, bin is from 0 to 63; BCM solution, bin is from 0 to 63.
+-- Bit set to 1 indicates the bin is masked off."
+-- ::= { adslLineConfEntry 11 }
+--
+-- adslLineConfAtucCarrierMask0 OBJECT-TYPE
+-- SYNTAX OCTET STRING
+-- MAX-ACCESS read-write
+-- STATUS current
+-- DESCRIPTION
+-- "The downstream carrier mask. For CTLM AnnexA solution, bin is from 32 to 255;
+-- CTLM AnnexB solution, bin is from 64 to 255; BCM solution, bin is from 32 to 255.
+-- Bit set to 1 indicates the bin is masked off."
+-- ::= { adslLineConfEntry 12 }
+--
+-- adslLineConfAtucCarrierMask1 OBJECT-TYPE
+-- SYNTAX OCTET STRING
+-- MAX-ACCESS read-write
+-- STATUS current
+-- DESCRIPTION
+-- "The downstream carrier mask from bin 256 to 511. Bit set to 1 indicates
+-- the bin is masked off."
+-- ::= { adslLineConfEntry 13 }
+--
+-- adslLineConfAturInp OBJECT-TYPE
+-- SYNTAX INTEGER {
+-- zero(1),
+-- zero-point-five(2),
+-- one(3),
+-- two(4),
+-- four(5),
+-- eight(6),
+-- sixteen(7)
+-- }
+-- MAX-ACCESS read-write
+-- STATUS current
+-- DESCRIPTION
+-- "The upstream Impulse Noise Protection minimum setting in unit of DMT symbol.
+-- For CTLM solution, user can set value from 1 ~ 4,
+-- but for BCM solution, user can set value from 1 ~ 7."
+-- ::= { adslLineConfEntry 14 }
+--
+-- adslLineConfAtucInp OBJECT-TYPE
+-- SYNTAX INTEGER {
+-- zero(1),
+-- zero-point-five(2),
+-- one(3),
+-- two(4),
+-- four(5),
+-- eight(6),
+-- sixteen(7)
+-- }
+-- MAX-ACCESS read-write
+-- STATUS current
+-- DESCRIPTION
+-- "The downstream Impulse Noise Protection minimum setting in unit of DMT symbol.
+-- For CTLM solution, user can set value from 1 ~ 4,
+-- but for BCM solution, user can set value from 1 ~ 7."
+-- ::= { adslLineConfEntry 15 }
+--
+--
+-- adslLineConfL0Time OBJECT-TYPE
+-- SYNTAX INTEGER
+-- MAX-ACCESS read-write
+-- STATUS current
+-- DESCRIPTION
+-- "Set the minimum time in seconds that the ADSL line
+-- must stay in L0 power mode before changing to the L2 power mode.
+-- For CTLM solution, the range is 120 ~ 65535;
+-- for BCM solution, the range is 10 ~ 65535."
+-- ::= { adslLineConfEntry 16 }
+--
+-- adslLineConfL2Time OBJECT-TYPE
+-- SYNTAX INTEGER
+-- MAX-ACCESS read-write
+-- STATUS current
+-- DESCRIPTION
+-- "Set minimum time in seconds that the ADSL line must stay in the
+-- L2 power mode before reducing the power again in the L2 power mode.
+-- For CTLM solution, the range is 60 ~ 65535;
+-- for BCM solution, the range is 10 ~ 65535."
+-- ::= { adslLineConfEntry 17 }
+--
+-- adslLineConfL2ATPR OBJECT-TYPE
+-- SYNTAX INTEGER
+-- UNITS "dB"
+-- MAX-ACCESS read-write
+-- STATUS current
+-- DESCRIPTION
+-- "Set the maximum Aggregate Transmit Power Reduction (ATPR)
+-- in decibels (dB) that is permitted in a L2 power reduction.
+-- The system can gradually decrease the ADSL line transmission power
+-- while it is in the L2 power mode. This is the largest individual
+-- power reduction allowed in the L2 power mode.
+-- For CTLM solution, the range is 1 ~ 5(dB);
+-- for BCM solution, the range is 0 ~ 15(dB)."
+-- ::= { adslLineConfEntry 18 }
+--
+-- adslLineConfL2ATPRT OBJECT-TYPE
+-- SYNTAX INTEGER
+-- UNITS "dB"
+-- MAX-ACCESS read-write
+-- STATUS current
+-- DESCRIPTION
+-- "the maximum Aggregate Transmit Power Reduction Total (ATPRT)
+-- in decibels (dB) that is permitted in the L2 power mode.
+-- This is the total transmit power decrease that is allowed
+-- to occur in the L2 power mode.
+-- For CTLM solution, the range is 1 ~ 40(dB);
+-- for BCM solution, the range is 0 ~ 15(dB)."
+-- ::= { adslLineConfEntry 19 }
+--
+--
+-- adslLineConfMaxL2Rate OBJECT-TYPE
+-- SYNTAX INTEGER
+-- UNITS "kbps"
+-- MAX-ACCESS read-write
+-- STATUS current
+-- DESCRIPTION
+-- "configured maximum L2 rate.
+-- (32~4096 Kbps, 4 Kbps resolution. For CTLM solution, 0 for system assign; for BCM solution, default:4096.)"
+-- ::= { adslLineConfEntry 20 }
+--
+-- adslLineConfMinL2Rate OBJECT-TYPE
+-- SYNTAX INTEGER
+-- UNITS "kbps"
+-- MAX-ACCESS read-write
+-- STATUS current
+-- DESCRIPTION
+-- "configured minimum L2 rate.
+-- (32~4096 Kbps, 4 Kbps resolution, For CTLM solution, 0 for system assign; for BCM solution, default:32.)"
+-- ::= { adslLineConfEntry 21 }
+--
+-- adslLineConfL0toL2Rate OBJECT-TYPE
+-- SYNTAX INTEGER
+-- UNITS "kbps"
+-- MAX-ACCESS read-write
+-- STATUS current
+-- DESCRIPTION
+-- "configured transition L0 to L2 rate.
+-- (<=minl2rate/2 and >= 16 Kbps, For CTLM solution, 0 for system assign; for BCM solution, default:16.)"
+-- ::= { adslLineConfEntry 22 }
+
+-- ADSL Port Batch Set
+
+--adslPortBatchSet OBJECT IDENTIFIER ::= { adslPort 3 }
+--
+-- adslPortTarget OBJECT-TYPE
+-- SYNTAX OCTET STRING
+-- MAX-ACCESS read-write
+-- STATUS current
+-- DESCRIPTION
+-- "The managed object is used for identify the target on which
+-- the port configuration should be performed. The target is encoded as:
+-- Byte 1: 0, Reserved(chaises)
+-- Byte 2~3: 0,0 Reserved(slot)
+-- Byte 4: 0, reserved
+-- Byte 5~11:each octet specifies a set of eight ports, with the first
+-- octet specifying ports 1 through 8, etc."
+-- ::= { adslPortBatchSet 1 }
+--
+-- adslPortOps OBJECT-TYPE
+-- SYNTAX INTEGER
+-- ACCESS read-write
+-- STATUS current
+-- DESCRIPTION
+-- "The managed object is for ADSL line configuration. When the EMS
+-- wants to issue the desired operation, the EMS shall send SNMP-SET message to set
+-- the corresponding bit value to be 1. The various bit positions are:
+-- BIT 1: enable port
+-- BIT 2: disable port
+-- BIT 3: set ADSL mode
+-- BIT 4: set line profile
+-- BIT 5: set alarm profile
+-- BIT 6: enable Annex L to be narrow mode(Only in AnnexA)
+-- BIT 7: enable Annex L to be wide mode(Only in AnnexA)
+-- BIT 8: disable Annex L(Only in AnnexA)
+-- BIT 9: enable Annex M (For BCM AnnexA solution)
+-- BIT 10: disable Annex M (For BCM AnnexA solution)
+-- BIT 11: enable Annex I (For BCM AnnexA solution)
+-- BIT 12: disable Annex I (For BCM AnnexA solution)
+-- BIT 13: set option mask
+-- BIT 14: enable power management mode to be L2
+-- BIT 15: enable power management mode to be L3
+-- BIT 16: disable power management mode
+-- BIT 17: set power mode to be fixed
+-- BIT 18: set power mode to be priority to power
+-- BIT 19: set power mode to be priority to rate
+-- BIT 20: set ATU-R max Tx power
+-- BIT 21: set ATU-C max Tx power
+-- BIT 22: set max Rx power
+-- BIT 23: set ATU-R carrier mask
+-- BIT 24: set ATU-C carrier mask
+-- BIT 25: set ATU-R INP minimum setting
+-- BIT 26: set ATU-C INP minimum setting"
+-- ::= { adslPortBatchSet 2 }
+--
+-- adslPortOps2 OBJECT-TYPE
+-- SYNTAX INTEGER
+-- ACCESS read-write
+-- STATUS current
+-- DESCRIPTION
+-- "The managed object is for ADSL line configuration. When the EMS
+-- wants to issue the desired operation, the EMS shall send SNMP-SET message to set
+-- the corresponding bit value to be 1. The various bit positions are:
+-- BIT 1: set L0 Time
+-- BIT 2: set L2 Time
+-- BIT 3: set L2 ATPR
+-- BIT 4: set L2 ATPRT
+-- BIT 5: set maximum L2 rate
+-- BIT 6: set minimum L2 rate
+-- BIT 7: set transition L0 to L2 rate"
+-- ::= { adslPortBatchSet 3 }
+--
+--
+-- adslModeForBatchSet OBJECT-TYPE
+-- SYNTAX INTEGER {
+-- gDotLite(1),
+-- gDotDmt(2),
+-- t1Dot413(3),
+-- auto(4),
+-- etsi(5),
+-- adsl2(6),
+-- adsl2Plus(7)
+-- }
+-- MAX-ACCESS read-write
+-- STATUS current
+-- DESCRIPTION
+-- "G.lite and T1.413 are only applicable to annex A board.
+-- ETSI is only applicable to annex B board."
+-- ::= { adslPortBatchSet 4 }
+--
+-- adslLineProfileForBatchSet OBJECT-TYPE
+-- SYNTAX DisplayString (SIZE (1..31))
+-- ACCESS read-write
+-- STATUS current
+-- DESCRIPTION
+-- "The ADSL line profile."
+-- ::= { adslPortBatchSet 5 }
+--
+-- adslAlarmProfileForBatchSet OBJECT-TYPE
+-- SYNTAX DisplayString (SIZE (1..31))
+-- ACCESS read-write
+-- STATUS current
+-- DESCRIPTION
+-- "The ADSL alarm profile."
+-- ::= { adslPortBatchSet 6 }
+--
+-- adslOptionMaskForBatchSet OBJECT-TYPE
+-- SYNTAX INTEGER
+-- MAX-ACCESS read-write
+-- STATUS current
+-- DESCRIPTION
+-- "The semantic for each bit is identical to the object adslLineConfOptionMask."
+-- ::= { adslPortBatchSet 7 }
+--
+-- adslAturMaxTxPowerForBatchSet OBJECT-TYPE
+-- SYNTAX INTEGER (-130..200)
+-- UNITS "tenth dBm"
+-- MAX-ACCESS read-write
+-- STATUS current
+-- DESCRIPTION
+-- "The maximum allowed transmit power of ATU-R."
+-- ::= { adslPortBatchSet 8 }
+--
+-- adslAtucMaxTxPowerForBatchSet OBJECT-TYPE
+-- SYNTAX INTEGER (-50..200)
+-- UNITS "tenth dBm"
+-- MAX-ACCESS read-write
+-- STATUS current
+-- DESCRIPTION
+-- "The maximum allowed transmit power of ATU-C."
+-- ::= { adslPortBatchSet 9 }
+--
+-- adslMaxRxPowerForBatchSet OBJECT-TYPE
+-- SYNTAX INTEGER (-255..255)
+-- UNITS "tenth dBm"
+-- MAX-ACCESS read-write
+-- STATUS current
+-- DESCRIPTION
+-- "The maximum aggregate received power."
+-- ::= { adslPortBatchSet 10 }
+--
+-- adslAturCarrierMaskForBatchSet OBJECT-TYPE
+-- SYNTAX OCTET STRING
+-- MAX-ACCESS read-write
+-- STATUS current
+-- DESCRIPTION
+-- "The upstream carrier mask.For CTLM AnnexA solution, bin is from 0 to 31;
+-- CTLM AnnexB solution, bin is from 0 to 63; BCM solution, bin is from 0 to 63.
+-- Bit set to 1 indicates the bin is masked off."
+-- ::= { adslPortBatchSet 11 }
+--
+-- adslAtucCarrierMask0ForBatchSet OBJECT-TYPE
+-- SYNTAX OCTET STRING
+-- MAX-ACCESS read-write
+-- STATUS current
+-- DESCRIPTION
+-- "The downstream carrier mask from bin 32 to 255. Bit set to 1 indicates
+-- the bin is masked off."
+-- ::= { adslPortBatchSet 12 }
+--
+-- adslAtucCarrierMask1ForBatchSet OBJECT-TYPE
+-- SYNTAX OCTET STRING
+-- MAX-ACCESS read-write
+-- STATUS current
+-- DESCRIPTION
+-- "The downstream carrier mask from bin 256 to 511. Bit set to 1 indicates
+-- the bin is masked off."
+-- ::= { adslPortBatchSet 13 }
+--
+-- adslAturInpForBatchSet OBJECT-TYPE
+-- SYNTAX INTEGER {
+-- zero(1),
+-- zero-point-five(2),
+-- one(3),
+-- two(4),
+-- four(5),
+-- eight(6),
+-- sixteen(7)
+-- }
+-- MAX-ACCESS read-write
+-- STATUS current
+-- DESCRIPTION
+-- "The upstream Impulse Noise Protection minimum setting in unit of DMT symbol.
+-- For CTLM solution, user can set value from 1 ~ 4, but for BCM solution, user can set value from 1 ~ 7."
+-- ::= { adslPortBatchSet 14 }
+--
+-- adslAtucInpForBatchSet OBJECT-TYPE
+-- SYNTAX INTEGER {
+-- zero(1),
+-- zero-point-five(2),
+-- one(3),
+-- two(4),
+-- four(5),
+-- eight(6),
+-- sixteen(7)
+-- }
+-- MAX-ACCESS read-write
+-- STATUS current
+-- DESCRIPTION
+-- "The downstream Impulse Noise Protection minimum setting in unit of DMT symbol.
+-- For CTLM solution, user can set value from 1 ~ 4, but for BCM solution, user can set value from 1 ~ 7."
+-- ::= { adslPortBatchSet 15 }
+--
+--
+-- adslL0TimeForBatchSet OBJECT-TYPE
+-- SYNTAX INTEGER
+-- MAX-ACCESS read-write
+-- STATUS current
+-- DESCRIPTION
+-- "Set the minimum time in seconds that the ADSL line
+-- must stay in L0 power mode before changing to the L2 power mode.
+-- For CTLM solution, the range is 120 ~ 65535; for BCM solution, the range is 10 ~ 65535."
+-- ::= { adslPortBatchSet 16 }
+--
+-- adslL2TimeForBatchSet OBJECT-TYPE
+-- SYNTAX INTEGER
+-- MAX-ACCESS read-write
+-- STATUS current
+-- DESCRIPTION
+-- "Set minimum time in seconds that the ADSL line
+-- must stay in the L2 power mode before reducing the power
+-- again in the L2 power mode.
+-- For CTLM solution, the range is 60 ~ 65535; for BCM solution, the range is 10 ~ 65535."
+-- ::= { adslPortBatchSet 17 }
+--
+-- adslL2ATPRForBatchSet OBJECT-TYPE
+-- SYNTAX INTEGER
+-- UNITS "dB"
+-- MAX-ACCESS read-write
+-- STATUS current
+-- DESCRIPTION
+-- "Set the maximum Aggregate Transmit Power Reduction (ATPR)
+-- in decibels (dB) that is permitted in a L2 power reduction.
+-- The system can gradually decrease the ADSL line transmission power
+-- while it is in the L2 power mode. This is the largest individual
+-- power reduction allowed in the L2 power mode.
+-- For CTLM solution, the range is 1 ~ 5(dB); for BCM solution, the range is 0 ~ 15(dB)."
+-- ::= { adslPortBatchSet 18 }
+--
+-- adslL2ATPRTForBatchSet OBJECT-TYPE
+-- SYNTAX INTEGER
+-- UNITS "dB"
+-- MAX-ACCESS read-write
+-- STATUS current
+-- DESCRIPTION
+-- "the maximum Aggregate Transmit Power Reduction Total (ATPRT)
+-- in decibels (dB) that is permitted in the L2 power mode.
+-- This is the total transmit power decrease that is allowed
+-- to occur in the L2 power mode.
+-- For CTLM solution, the range is 1 ~ 40(dB); for BCM solution, the range is 0 ~ 15(dB)."
+-- ::= { adslPortBatchSet 19 }
+--
+-- adslMaxL2RateForBatchSet OBJECT-TYPE
+-- SYNTAX INTEGER
+-- UNITS "kbps"
+-- MAX-ACCESS read-write
+-- STATUS current
+-- DESCRIPTION
+-- "configured maximum L2 rate.
+-- (32~4096 Kbps, 4 Kbps resolution. For CTLM solution, 0 for system assign; for BCM solution, default:4096.)"
+-- ::= { adslPortBatchSet 20 }
+--
+-- adslMinL2RateForBatchSet OBJECT-TYPE
+-- SYNTAX INTEGER
+-- UNITS "kbps"
+-- MAX-ACCESS read-write
+-- STATUS current
+-- DESCRIPTION
+-- "configured minimum L2 rate.
+-- (32~4096 Kbps, 4 Kbps resolution, For CTLM solution, 0 for system assign; for BCM solution, default:32.)"
+-- ::= { adslPortBatchSet 21 }
+--
+-- adslL0toL2RateForBatchSet OBJECT-TYPE
+-- SYNTAX INTEGER
+-- UNITS "kbps"
+-- MAX-ACCESS read-write
+-- STATUS current
+-- DESCRIPTION
+-- "configured transition L0 to L2 rate.
+-- (<=minl2rate/2 and >= 16 Kbps, For CTLM solution, 0 for system assign; for BCM solution, default:16.)"
+-- ::= { adslPortBatchSet 22 }
+
+-- Line Status
+
+-- adslLineStatusTable OBJECT-TYPE
+-- SYNTAX SEQUENCE OF AdslLineStatusEntry
+-- MAX-ACCESS not-accessible
+-- STATUS current
+-- DESCRIPTION
+-- "This table includes the ADSL line status."
+-- ::= { adslPort 4 }
+--
+--adslLineStatusEntry OBJECT-TYPE
+-- SYNTAX AdslLineStatusEntry
+-- MAX-ACCESS not-accessible
+-- STATUS current
+-- DESCRIPTION
+-- "An entry in adslLineStatusTable."
+-- INDEX { ifIndex }
+-- ::= { adslLineStatusTable 1 }
+--
+-- AdslLineStatusEntry ::=
+-- SEQUENCE {
+-- adslLineStatusMode INTEGER,
+-- adslLineUpTime INTEGER
+-- }
+--
+-- adslLineStatusMode OBJECT-TYPE
+-- SYNTAX INTEGER {
+-- gDotLite(1),
+-- gDotDmt(2),
+-- t1Dot413(3),
+-- etsi(4),
+-- adsl2(5),
+-- adsl2Plus(6),
+-- none(7)
+-- }
+-- MAX-ACCESS read-only
+-- STATUS current
+-- DESCRIPTION
+-- "The link up mode of the ADSL line."
+-- ::= { adslLineStatusEntry 1 }
+--
+-- adslLineUpTime OBJECT-TYPE
+-- SYNTAX INTEGER
+-- MAX-ACCESS read-only
+-- STATUS current
+-- DESCRIPTION
+-- "The link up time of the ADSL line, in unit of seconds"
+-- ::= { adslLineStatusEntry 2 }
+
+-- Power Mgmt Parameter Table
+
+-- powerMgmtParamTable OBJECT-TYPE
+-- SYNTAX SEQUENCE OF PowerMgmtParamEntry
+-- MAX-ACCESS not-accessible
+-- STATUS current
+-- DESCRIPTION
+-- "This table defines L0 to L2 power transition parameters."
+-- ::= { adslPort 5 }
+--
+--powerMgmtParamEntry OBJECT-TYPE
+-- SYNTAX PowerMgmtParamEntry
+-- MAX-ACCESS not-accessible
+-- STATUS current
+-- DESCRIPTION
+-- "An entry in powerMgmtParamTable."
+-- INDEX { ifIndex }
+-- ::= { powerMgmtParamTable 1 }
+--
+-- PowerMgmtParamEntry ::=
+-- SEQUENCE {
+-- powerMgmtL0Time INTEGER,
+-- powerMgmtL2Time INTEGER,
+-- powerMgmtL2Atpr INTEGER,
+-- powerMgmtL2Atprt INTEGER,
+-- powerMgmtL2MinRate INTEGER,
+-- powerMgmtL2MaxRate INTEGER,
+-- powerMgmtL2ThreshRate INTEGER
+-- }
+--
+-- powerMgmtL0Time OBJECT-TYPE
+-- SYNTAX INTEGER
+-- UNITS "second"
+-- MAX-ACCESS read-write
+-- STATUS current
+-- DESCRIPTION
+-- "The object specifies the minimum time in L0 mode before L2 mode may be entered."
+-- ::= { powerMgmtParamEntry 1 }
+--
+--powerMgmtL2Time OBJECT-TYPE
+-- SYNTAX INTEGER
+-- UNITS "second"
+-- MAX-ACCESS read-write
+-- STATUS current
+-- DESCRIPTION
+-- "The object specifies the minimum time in L2 mode before trimming and in between power trims."
+-- ::= { powerMgmtParamEntry 2 }
+--
+-- powerMgmtL2Atpr OBJECT-TYPE
+-- SYNTAX INTEGER
+-- UNITS "dB"
+-- MAX-ACCESS read-write
+-- STATUS current
+-- DESCRIPTION
+-- "The maximum Aggregate Transmit Power Reduction."
+-- ::= { powerMgmtParamEntry 3 }
+--
+-- powerMgmtL2Atprt OBJECT-TYPE
+-- SYNTAX INTEGER
+-- UNITS "dB"
+-- MAX-ACCESS read-write
+-- STATUS current
+-- DESCRIPTION
+-- "The maximum Aggregate Transmit Power Reduction Total."
+-- ::= { powerMgmtParamEntry 4 }
+--
+-- powerMgmtL2MinRate OBJECT-TYPE
+-- SYNTAX INTEGER
+-- UNITS "Kbps"
+-- MAX-ACCESS read-write
+-- STATUS current
+-- DESCRIPTION
+-- "The object specifies the minimum L2 rate."
+-- ::= { powerMgmtParamEntry 5 }
+--
+-- powerMgmtL2MaxRate OBJECT-TYPE
+-- SYNTAX INTEGER
+-- UNITS "Kbps"
+-- MAX-ACCESS read-write
+-- STATUS current
+-- DESCRIPTION
+-- "The object specifies the maximum L2 rate."
+-- ::= { powerMgmtParamEntry 6 }
+--
+-- powerMgmtL2ThreshRate OBJECT-TYPE
+-- SYNTAX INTEGER
+-- UNITS "Kbps"
+-- MAX-ACCESS read-write
+-- STATUS current
+-- DESCRIPTION
+-- "The object specifies the rate threshold that triggers the line entering L0 or L2 mode."
+-- ::= { powerMgmtParamEntry 7 }
+
+-- Power Mgmt PSD Table
+-- Not support in 7324 RU R4.0.2
+-- powerMgmtPSDTable OBJECT-TYPE
+-- SYNTAX SEQUENCE OF PowerMgmtPSDEntry
+-- MAX-ACCESS not-accessible
+-- STATUS current
+-- DESCRIPTION
+-- "This table provides the PSD setting for both ATU-C and ATU-R."
+-- ::= { adslPort 6 }
+--
+--powerMgmtPSDEntry OBJECT-TYPE
+-- SYNTAX PowerMgmtPSDEntry
+-- MAX-ACCESS not-accessible
+-- STATUS current
+-- DESCRIPTION
+-- "An entry in powerMgmtPSDTable."
+-- INDEX { ifIndex }
+-- ::= { powerMgmtPSDTable 1 }
+--
+-- PowerMgmtPSDEntry ::=
+-- SEQUENCE {
+-- powerMgmtAtucMaxPSD INTEGER,
+-- powerMgmtAturMaxPSD INTEGER
+-- }
+--
+-- powerMgmtAtucMaxPSD OBJECT-TYPE
+-- SYNTAX INTEGER
+-- UNITS "0.1dBm/Hz"
+-- MAX-ACCESS read-write
+-- STATUS current
+-- DESCRIPTION
+-- "The object specifies the maximum ATU-C PSD."
+-- ::= { powerMgmtPSDEntry 1 }
+--
+-- powerMgmtAturMaxPSD OBJECT-TYPE
+-- SYNTAX INTEGER
+-- UNITS "0.1dBm/Hz"
+-- MAX-ACCESS read-write
+-- STATUS current
+-- DESCRIPTION
+-- "The object specifies the maximum ATU-R PSD."
+-- ::= { powerMgmtPSDEntry 2 }
+
+
+--------------------
+-- shdslPort
+--------------------
+
+-- SHDSL Line Table
+
+ shdslLineConfTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF ShdslLineConfEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table includes common attributes describing the SHDSL line."
+ ::= { shdslPort 1 }
+
+ shdslLineConfEntry OBJECT-TYPE
+ SYNTAX ShdslLineConfEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry in shdslLineConfTable."
+ INDEX { ifIndex }
+ ::= { shdslLineConfTable 1 }
+
+ ShdslLineConfEntry ::=
+ SEQUENCE {
+ shdslLineConfShdslMode INTEGER,
+ shdslLineConfPmms INTEGER,
+ shdslLineConfPboMode INTEGER,
+ shdslLineConfPboValue INTEGER,
+ shdslLineConfShdslTCMode INTEGER
+ }
+
+ shdslLineConfShdslMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ stuc(1),
+ stur(2),
+ auto(3),
+ pam16(4),
+ pam32(5)
+
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Mode of the SHDSL port."
+ ::= { shdslLineConfEntry 1 }
+
+ shdslLineConfPmms OBJECT-TYPE
+ SYNTAX INTEGER {
+ normal(1),
+ forced(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Negotiated noise margin mode of the SHDSL port."
+ ::= { shdslLineConfEntry 2 }
+
+ shdslLineConfPboMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ normalepl(1),
+ forcedepl(2),
+ forcednoepl(3)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Power backoff mode of the SHDSL port."
+ ::= { shdslLineConfEntry 3 }
+
+ shdslLineConfPboValue OBJECT-TYPE
+ SYNTAX INTEGER (0..31)
+ UNITS "dB"
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Power backoff value of the SHDSL port."
+ ::= { shdslLineConfEntry 4 }
+
+ shdslLineConfShdslTCMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ atm(1),
+ efm(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Transmission Convergence Mode of the SHDSL port."
+ ::= { shdslLineConfEntry 5 }
+
+-- SHDSL Port Batch Set
+
+ shdslPortBatchSet OBJECT IDENTIFIER ::= { shdslPort 2 }
+
+ shdslPortTarget OBJECT-TYPE
+ SYNTAX OCTET STRING
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The managed object is used for identify the target on which
+ the port configuration should be performed. The target is encoded as:
+ Byte 1: the octet specifies a set of eight chassis, chassis 0 through 7
+ Byte 2~3: each octet specifies a set of eight slots, with the
+ first octet specifying slots 1 through 8 and the second
+ octet specifying slots 9 through 16.
+ Byte 4: reserved
+ Byte 5~11:each octet specifies a set of eight ports, with the first
+ octet specifying ports 1 through 8, etc."
+ ::= { shdslPortBatchSet 1 }
+
+ shdslPortOps OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The managed object is for SHDSL line configuration. When the EMS
+ wants to issue the desired operation, the EMS shall send SNMP-SET message to set
+ the corresponding bit value to be 1. The various bit positions are:
+ BIT 1: enable port
+ BIT 2: disable port
+ BIT 3: set SHDSL mode
+ BIT 4: set line profile
+ BIT 5: set alarm profile
+ BIT 6: set pmms mode to be normal
+ BIT 7: set pmms mode to be forced
+ BIT 8: set pbo mode to be normalepl
+ BIT 9: set pbo mode to be forcedepl
+ BIT 10: set pbo mode to be forcednoepl
+ BIT 11: set pbo value"
+ ::= { shdslPortBatchSet 2 }
+
+ shdslModeForBatchSet OBJECT-TYPE
+ SYNTAX INTEGER {
+ stuc(1),
+ stur(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Mode of the SHDSL port."
+ ::= { shdslPortBatchSet 3 }
+
+ shdslLineProfileForBatchSet OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (1..31))
+ ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The SHDSL line profile."
+ ::= { shdslPortBatchSet 4 }
+
+ shdslAlarmProfileForBatchSet OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (1..31))
+ ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The SHDSL alarm profile."
+ ::= { shdslPortBatchSet 5 }
+
+ shdslPboValueForBatchSet OBJECT-TYPE
+ SYNTAX INTEGER (0..31)
+ UNITS "dB"
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Power backoff value of the SHDSL port."
+ ::= { shdslPortBatchSet 6 }
+
+
+--------------------
+-- pvc
+--------------------
+
+ maxNumOfPvcs OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The maximum number of PVCs which could be created on a port."
+ ::= { pvc 1 }
+
+-- PVC Table
+
+ pvcTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF PvcEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table includes PVC configuration."
+ ::= { pvc 2 }
+
+ pvcEntry OBJECT-TYPE
+ SYNTAX PvcEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry in pvcTable."
+ INDEX { ifIndex, pvcVpi, pvcVci, pvcPvid }
+ ::= { pvcTable 1 }
+
+ PvcEntry ::=
+ SEQUENCE {
+ pvcVpi INTEGER,
+ pvcVci INTEGER,
+ pvcPvid VlanIndex,
+ pvcPriority INTEGER,
+ pvcProfileDS DisplayString,
+ pvcRowStatus RowStatus,
+ pvcProfileUS DisplayString
+ }
+
+ pvcVpi OBJECT-TYPE
+ SYNTAX INTEGER (0..255)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "VPI of the pvc."
+ ::= { pvcEntry 1 }
+
+ pvcVci OBJECT-TYPE
+ SYNTAX INTEGER (1..65535)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "VCI of the pvc."
+ ::= { pvcEntry 2 }
+
+ pvcPvid OBJECT-TYPE
+ SYNTAX VlanIndex
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Default VID of the pvc."
+ ::= { pvcEntry 3 }
+
+
+ pvcPriority OBJECT-TYPE
+ SYNTAX INTEGER (0..7)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "802.1p default priority of the pvc."
+ ::= { pvcEntry 5 }
+
+ pvcProfileDS OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (1..31))
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The value of this object identifies the row in the atmProfileTable, which applies for this pvc in DS side."
+ ::= { pvcEntry 6 }
+
+ pvcRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object is used to create a new row or delete an existing row in this table."
+ ::= { pvcEntry 7 }
+
+ pvcProfileUS OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (1..31))
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The value of this object identifies the row in the atmProfileTable, which applies for this pvc in US side."
+ ::= { pvcEntry 8 }
+
+-- Upstream Rate Limit Table
+
+ pvcUsRateLimitTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF PvcUsRateLimitEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table defines the upstream rate limit for each PVC."
+ ::= { pvc 4 }
+
+ pvcUsRateLimitEntry OBJECT-TYPE
+ SYNTAX PvcUsRateLimitEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry in pvcUsRateLimitTable."
+ INDEX { ifIndex, pvcVpi, pvcVci }
+ ::= { pvcUsRateLimitTable 1 }
+
+ PvcUsRateLimitEntry ::=
+ SEQUENCE {
+ pvcUsRateLimitEnable INTEGER,
+ pvcUsRateLimit INTEGER
+ }
+
+ pvcUsRateLimitEnable OBJECT-TYPE
+ SYNTAX INTEGER {
+ enable(1),
+ disable(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Enable/disable upstream rate limit for a PVC."
+ ::= { pvcUsRateLimitEntry 1 }
+
+ pvcUsRateLimit OBJECT-TYPE
+ SYNTAX INTEGER
+ UNITS "Kbps"
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Upstream rate limit in Kbps for a PVC."
+ ::= { pvcUsRateLimitEntry 2 }
+
+
+--------------------
+-- priority pvc
+--------------------
+
+ maxNumOfPriorityPvcs OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The maximum number of priority PVCs which could be created on a port."
+ ::= { ppvc 1 }
+
+-- Priority PVC Table
+
+ ppvcTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF PpvcEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table includes priority PVC configuration."
+ ::= { ppvc 2 }
+
+ ppvcEntry OBJECT-TYPE
+ SYNTAX PpvcEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry in ppvcTable."
+ INDEX { ifIndex, ppvcVpi, ppvcVci, ppvcPvid }
+ ::= { ppvcTable 1 }
+
+ PpvcEntry ::=
+ SEQUENCE {
+ ppvcVpi INTEGER,
+ ppvcVci INTEGER,
+ ppvcPvid VlanIndex,
+ ppvcEncap INTEGER,
+ ppvcPriority INTEGER,
+ ppvcRowStatus RowStatus
+ }
+
+ ppvcVpi OBJECT-TYPE
+ SYNTAX INTEGER (0..255)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "VPI of the ppvc."
+ ::= { ppvcEntry 1 }
+
+ ppvcVci OBJECT-TYPE
+ SYNTAX INTEGER (1..65535)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "VCI of the ppvc."
+ ::= { ppvcEntry 2 }
+
+ ppvcPvid OBJECT-TYPE
+ SYNTAX VlanIndex
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Default VID of the ppvc."
+ ::= { ppvcEntry 3 }
+
+ ppvcEncap OBJECT-TYPE
+ SYNTAX INTEGER {
+ llc(1),
+ vc(2)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Encapsulation of the ppvc."
+ ::= { ppvcEntry 4 }
+
+ ppvcPriority OBJECT-TYPE
+ SYNTAX INTEGER (0..7)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "802.1p default priority of the ppvc."
+ ::= { ppvcEntry 5 }
+
+ ppvcRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object is used to create a new row or delete an existing row in this table."
+ ::= { ppvcEntry 6 }
+
+-- Priority PVC Member Table
+
+ ppvcMemberTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF PpvcMemberEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table includes priority PVC member configuration."
+ ::= { ppvc 4 }
+
+ ppvcMemberEntry OBJECT-TYPE
+ SYNTAX PpvcMemberEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry in ppvcMemberTable."
+ INDEX { ifIndex, ppvcVpi, ppvcVci, ppvcMemberVpi, ppvcMemberVci, ppvcMemberPriority }
+ ::= { ppvcMemberTable 1 }
+
+ PpvcMemberEntry ::=
+ SEQUENCE {
+ ppvcMemberVpi INTEGER,
+ ppvcMemberVci INTEGER,
+ ppvcMemberPriority INTEGER,
+ ppvcMemberProfileDS DisplayString,
+ ppvcMemberRowStatus RowStatus,
+ ppvcMemberProfileUS DisplayString
+ }
+
+ ppvcMemberVpi OBJECT-TYPE
+ SYNTAX INTEGER (0..255)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "VPI of the member ppvc."
+ ::= { ppvcMemberEntry 1 }
+
+ ppvcMemberVci OBJECT-TYPE
+ SYNTAX INTEGER (1..65535)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "VCI of the member ppvc."
+ ::= { ppvcMemberEntry 2 }
+
+ ppvcMemberPriority OBJECT-TYPE
+ SYNTAX INTEGER (0..7)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "802.1p default priority of the member ppvc."
+ ::= { ppvcMemberEntry 3 }
+
+ ppvcMemberProfileDS OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (1..31))
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The profile of the member ppvc in DS side."
+ ::= { ppvcMemberEntry 4 }
+
+ ppvcMemberRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object is used to create a new row or delete an existing row in this table."
+ ::= { ppvcMemberEntry 5 }
+
+ ppvcMemberProfileUS OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (1..31))
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The profile of the member ppvc in US side."
+ ::= { ppvcMemberEntry 6 }
+
+--------------------
+-- portOperation
+--------------------
+
+ portTarget OBJECT-TYPE
+ SYNTAX OCTET STRING
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The managed object is used for identify the target on which
+ the port configuration should be performed. The target is encoded as:
+ Byte 1: the octet specifies a set of eight chassis, chassis 0 through 7
+ Byte 2~3: each octet specifies a set of eight slots, with the
+ first octet specifying slots 1 through 8 and the second
+ octet specifying slots 9 through 16.
+ Byte 4: reserved
+ Byte 5~11:each octet specifies a set of eight ports, with the first
+ octet specifying ports 1 through 8, etc."
+ ::= { portOperation 1 }
+
+ portOps OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The managed object is for xDSL line configuration. When the EMS
+ wants to issue the desired operation, the EMS shall send SNMP-SET message to set
+ the corresponding bit value to be 1. The various bit positions are:
+ BIT 1: enable port
+ BIT 2: disable port"
+ ::= { portOperation 2 }
+
+--------------------
+-- paepvc
+--------------------
+
+-- PPPoAoE PVC Table
+
+ paepvcTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF PaePvcEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table includes PPPoAoE PVC configuration."
+ ::= { paepvc 1 }
+
+ paepvcEntry OBJECT-TYPE
+ SYNTAX PaePvcEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry of paepvcTable."
+ INDEX { ifIndex, paepvcVpi, paepvcVci, paepvcPvid }
+ ::= { paepvcTable 1 }
+
+ PaePvcEntry ::=
+ SEQUENCE {
+ paepvcVpi INTEGER,
+ paepvcVci INTEGER,
+ paepvcPvid VlanIndex,
+ paepvcPriority INTEGER,
+ paepvcProfileDS DisplayString,
+ paepvcAcName DisplayString,
+ paepvcServiceName DisplayString,
+ paepvcHelloTime INTEGER,
+ paepvcRowStatus RowStatus,
+ paepvcProfileUS DisplayString
+ }
+
+ paepvcVpi OBJECT-TYPE
+ SYNTAX INTEGER (0..255)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "VPI of the pvc."
+ ::= { paepvcEntry 1 }
+
+ paepvcVci OBJECT-TYPE
+ SYNTAX INTEGER (1..65535)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "VCI of the pvc."
+ ::= { paepvcEntry 2 }
+
+ paepvcPvid OBJECT-TYPE
+ SYNTAX VlanIndex
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Default VID of the pvc."
+ ::= { paepvcEntry 3 }
+
+
+ paepvcPriority OBJECT-TYPE
+ SYNTAX INTEGER (0..7)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "802.1p default priority of the pvc."
+ ::= { paepvcEntry 5 }
+
+ paepvcProfileDS OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (1..31))
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The value of this object identifies the row in the atmProfileTable, which applies for this pvc in DS side."
+ ::= { paepvcEntry 6 }
+
+ paepvcAcName OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Access concentrator name."
+ ::= { paepvcEntry 7 }
+
+ paepvcServiceName OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Service name."
+ ::= { paepvcEntry 8 }
+
+ paepvcHelloTime OBJECT-TYPE
+ SYNTAX INTEGER
+ UNITS "second"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The system will close the PVC if there are not any LCP echo messages passed through
+ during the LCP hello time."
+ ::= { paepvcEntry 9 }
+
+ paepvcRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object is used to create a new row or delete an existing row in this table."
+ ::= { paepvcEntry 10 }
+
+ paepvcProfileUS OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (1..31))
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The value of this object identifies the row in the atmProfileTable, which applies for this pvc in US side."
+ ::= { paepvcEntry 11 }
+
+--------------------
+-- tlspvc
+--------------------
+
+-- TLS PVC Table
+
+ tlspvcTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF TlsPvcEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table includes Transparent LAN Service (TLS) PVC configuration."
+ ::= { tlspvc 1 }
+
+ tlspvcEntry OBJECT-TYPE
+ SYNTAX TlsPvcEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry of tlspvcTable."
+ INDEX { ifIndex, tlspvcVpi, tlspvcVci, tlspvcSvid }
+ ::= { tlspvcTable 1 }
+
+ TlsPvcEntry ::=
+ SEQUENCE {
+ tlspvcVpi INTEGER,
+ tlspvcVci INTEGER,
+ tlspvcSvid VlanIndex,
+ tlspvcSpriority INTEGER,
+ tlspvcProfileDS DisplayString,
+ tlspvcRowStatus RowStatus,
+ tlspvcProfileUS DisplayString
+ }
+
+ tlspvcVpi OBJECT-TYPE
+ SYNTAX INTEGER (0..255)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "VPI of the pvc."
+ ::= { tlspvcEntry 1 }
+
+ tlspvcVci OBJECT-TYPE
+ SYNTAX INTEGER (1..65535)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "VCI of the pvc."
+ ::= { tlspvcEntry 2 }
+
+ tlspvcSvid OBJECT-TYPE
+ SYNTAX VlanIndex
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "s-tag VLAN ID of the pvc."
+ ::= { tlspvcEntry 3 }
+
+
+ tlspvcSpriority OBJECT-TYPE
+ SYNTAX INTEGER (0..7)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "s-tag priority of the pvc."
+ ::= { tlspvcEntry 5 }
+
+ tlspvcProfileDS OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (1..31))
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The value of this object identifies the row in the atmProfileTable, which applies for this pvc in DS side."
+ ::= { tlspvcEntry 6 }
+
+ tlspvcRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object is used to create a new row or delete an existing row in this table."
+ ::= { tlspvcEntry 7 }
+
+ tlspvcProfileUS OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (1..31))
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The value of this object identifies the row in the atmProfileTable, which applies for this pvc in US side."
+ ::= { tlspvcEntry 8 }
+
+--------------------
+-- gbond
+--------------------
+
+-- gbondTable
+
+ gbondGroupTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GbondGroupEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table containing the G.Bond configuration information for
+ each bonding group of the device."
+ ::= { gbond 1 }
+
+ gbondGroupEntry OBJECT-TYPE
+ SYNTAX GbondGroupEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry of gbondTable."
+ INDEX { gbondGroupName }
+ ::= { gbondGroupTable 1 }
+
+ GbondGroupEntry ::=
+ SEQUENCE {
+ gbondGroupName OCTET STRING,
+ gbondGroupPorts OCTET STRING,
+ gbondGroupSid INTEGER,
+ gbondGroupUpRate Unsigned32,
+ gbondGroupDownRate Unsigned32,
+ gbondGroupRowStatus RowStatus
+ }
+
+ gbondGroupName OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (0..31))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "An administratively assigned string, which may be used to identify bonding group."
+ ::= { gbondGroupEntry 1 }
+
+ gbondGroupPorts OBJECT-TYPE
+ SYNTAX OCTET STRING
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The set of ports which are currently assigned to the
+ bonding group of specified group name.
+ Byte 1: Reserved(chassis)
+ Byte 2~3: Reserved(slot)
+ Byte 4: Reserved
+ Byte 5: Each bit in the octet specifies a port from MSB to LSB.
+ for example: 32(hex) = 50(dec) = 00110010(bin) means the
+ port 3, 4 and 7.
+ Byte 6~10:Reserved"
+ ::= { gbondGroupEntry 2 }
+
+ gbondGroupSid OBJECT-TYPE
+ SYNTAX INTEGER {
+ sid8(1),
+ sid12(2)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object indicates the sequence index mode of the bonding group."
+ ::= { gbondGroupEntry 3 }
+
+ gbondGroupUpRate OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The UP stream rate."
+ ::= { gbondGroupEntry 4 }
+
+ gbondGroupDownRate OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The DOWN stream rate."
+ ::= { gbondGroupEntry 5 }
+
+ gbondGroupRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object indicates the status of this entry."
+ ::= { gbondGroupEntry 6 }
+
+
+---------------
+-- switch
+----------------------------------------
+
+-- enetport OBJECT IDENTIFIER ::= { switch 3 }
+-- bandwidth OBJECT IDENTIFIER ::= { switch 4 }
+-- qschedule OBJECT IDENTIFIER ::= { switch 5 }
+-- dot3ad OBJECT IDENTIFIER ::= { switch 6 }
+-- stp OBJECT IDENTIFIER ::= { switch 7 }
+-- bcastCtrl OBJECT IDENTIFIER ::= { switch 8 }
+-- portIsolation OBJECT IDENTIFIER ::= { switch 9 }
+ dscp OBJECT IDENTIFIER ::= { switch 10 }
+-- mstp OBJECT IDENTIFIER ::= { switch 11 }
+ vlanIsolation OBJECT IDENTIFIER ::= { switch 12 }
+ enetMtu OBJECT IDENTIFIER ::= { switch 13 }
+-- managementVLANId OBJECT-TYPE
+-- SYNTAX VlanIndex
+-- MAX-ACCESS read-write
+-- STATUS current
+-- DESCRIPTION
+-- "The VLAN ID for management."
+-- ::= { switch 1 }
+
+-- maxNumOfStaticVlans OBJECT-TYPE
+-- SYNTAX INTEGER
+-- MAX-ACCESS read-only
+-- STATUS current
+-- DESCRIPTION
+-- "The maximum number of VLANs supported by the system."
+-- ::= { switch 2 }
+--------------------
+-- dscp
+--------------------
+
+ dscpMappingTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF DscpMappingEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The table contains DSCP mapping configuration for the adsl and ethernet ports."
+ ::= { dscp 1 }
+
+ dscpMappingEntry OBJECT-TYPE
+ SYNTAX DscpMappingEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry of dscpMappingTable."
+ INDEX { dscpSrcCodePoint }
+ ::= { dscpMappingTable 1 }
+
+ DscpMappingEntry ::=
+ SEQUENCE {
+ dscpSrcCodePoint INTEGER,
+-- dscpMapCodePoint INTEGER,
+ dscpMapPriority INTEGER
+ }
+
+ dscpSrcCodePoint OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The DSCP source code point used for mapping."
+ ::= { dscpMappingEntry 1 }
+
+-- dscpMapCodePoint OBJECT-TYPE
+-- SYNTAX INTEGER (0..63)
+-- MAX-ACCESS read-write
+-- STATUS current
+-- DESCRIPTION
+-- "The mapping code point that will replace the source code point in the incoming packet."
+-- ::= { dscpMappingEntry 2 }
+
+ dscpMapPriority OBJECT-TYPE
+ SYNTAX INTEGER (0..7)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The mapping p bits that will replace the source p bits in the incoming packet."
+ ::= { dscpMappingEntry 3 }
+
+--- pfchen
+ dscpPortTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF DscpPortEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The table contains DSCP mapping configuration for the adsl and ethernet ports."
+ ::= { dscp 2 }
+
+ dscpPortEntry OBJECT-TYPE
+ SYNTAX DscpPortEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry of dscpPortTable."
+ INDEX { ifIndex }
+ ::= { dscpPortTable 1 }
+
+ DscpPortEntry ::=
+ SEQUENCE {
+ dscpStatusEnable INTEGER
+ }
+
+ dscpStatusEnable OBJECT-TYPE
+ SYNTAX INTEGER {
+ enable(1),
+ disable(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The DSCP port status."
+ ::= { dscpPortEntry 1 }
+
+--------------------
+-- Vlan Isolation
+--------------------
+
+ vlanIsolationTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF VlanIsolationEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table contains configuration of isolated VLAN."
+ ::= { vlanIsolation 1 }
+
+ vlanIsolationEntry OBJECT-TYPE
+ SYNTAX VlanIsolationEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry of vlanIsolationTable."
+ INDEX { dot1qVlanIndex }
+ ::= { vlanIsolationTable 1 }
+
+ VlanIsolationEntry ::=
+ SEQUENCE {
+ vlanIsolationRowStatus INTEGER
+ }
+
+ vlanIsolationRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Row status of the table used to create/delete an entry."
+ ::= { vlanIsolationEntry 1 }
+
+--------------------
+-- enet MTU
+--------------------
+
+ enetMaxMtu OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Sets the maximum MTU size for layer 2 frame, size from 1526 to 1600, default value is 1526."
+ ::= { enetMtu 1 }
+
+----------------------------------------
+-- sys
+----------------------------------------
+
+-- sysState OBJECT IDENTIFIER ::= { sys 1 }
+-- sysOperation OBJECT IDENTIFIER ::= { sys 2 }
+-- hwMonitor OBJECT IDENTIFIER ::= { sys 3 }
+-- timeSetup OBJECT IDENTIFIER ::= { sys 4 }
+ accessCtrl OBJECT IDENTIFIER ::= { sys 5 }
+-- syslog OBJECT IDENTIFIER ::= { sys 6 }
+-- snmp OBJECT IDENTIFIER ::= { sys 7 }
+ extAlarm OBJECT IDENTIFIER ::= { sys 8 }
+ user OBJECT IDENTIFIER ::= { sys 9 }
+
+----------------------------------------
+-- slot id
+----------------------------------------
+ sysSlotId OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Device slot ID(0...255)."
+ ::= { sys 10 }
+
+--------------------
+-- Access Control
+--------------------
+-- Secured Client Table
+
+ securedClientTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF SecuredClientEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table that contains information about secured clients."
+ ::= { accessCtrl 2 }
+
+ securedClientEntry OBJECT-TYPE
+ SYNTAX SecuredClientEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A list of secured client entry."
+ INDEX { securedClientIndex }
+ ::= { securedClientTable 1 }
+
+ SecuredClientEntry ::=
+ SEQUENCE {
+ securedClientIndex INTEGER,
+ securedClientStartIp IpAddress,
+ securedClientEndIp IpAddress,
+ securedClientService INTEGER,
+ securedClientEnable INTEGER
+ }
+
+ securedClientIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The index of the entry."
+ ::= { securedClientEntry 1 }
+
+ securedClientStartIp OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The starting IP address of the secured client set."
+ ::= { securedClientEntry 2 }
+
+ securedClientEndIp OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The ending IP address of the secured client set."
+ ::= { securedClientEntry 3 }
+
+ securedClientService OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Each bit corresponds to a service. The bit is set to 1 if the
+ service is enabled, and set to 0 if the service is disabled.
+ The various bit positions are:
+ BIT 1: telnet
+ BIT 2: ftp
+ BIT 3: web
+ BIT 4: icmp
+ BIT 5: ssh
+ BIT 6: snmp."
+ ::= { securedClientEntry 4 }
+
+ securedClientEnable OBJECT-TYPE
+ SYNTAX INTEGER {
+ enable(1),
+ disable(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Enable/disable the entry."
+ ::= { securedClientEntry 5 }
+
+----------------------------------------
+--extAlarm
+----------------------------------------
+
+ extAlarmTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF ExtAlarmEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table that contains external alarm information."
+ ::= { extAlarm 1 }
+
+ extAlarmEntry OBJECT-TYPE
+ SYNTAX ExtAlarmEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The entry of external alarm table."
+ INDEX { extAlarmIndex }
+ ::= { extAlarmTable 1 }
+
+ ExtAlarmEntry ::=
+ SEQUENCE {
+ extAlarmIndex INTEGER,
+ extAlarmname OCTET STRING,
+ extAlarmstatus OCTET STRING
+ }
+
+ extAlarmIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The index of the entry."
+ ::= { extAlarmEntry 1 }
+
+ extAlarmname OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (1..31))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The external alarm name."
+ ::= { extAlarmEntry 2 }
+
+ extAlarmstatus OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (1..31))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Dispaly 'Normal' or 'Alarm' string"
+ ::= { extAlarmEntry 3 }
+
+--------------------
+-- User Management
+--------------------
+
+ userAuthMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ local(1),
+ radius(2),
+ localThenRadius(3)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "User authentication procsssing mode."
+ ::= { user 1 }
+
+ userAuthServerIp OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The IP address of the authentication server."
+ ::= { user 2 }
+
+ userAuthServerPort OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The port of the authentication server."
+ ::= { user 3 }
+
+ userAuthServerSecret OBJECT-TYPE
+ SYNTAX OCTET STRING
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The secret between the authentication server and the NE for authentication process."
+ ::= { user 4 }
+
+-- userTable
+
+ userTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF UserEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table that contains user information."
+ ::= { user 5 }
+
+ userEntry OBJECT-TYPE
+ SYNTAX UserEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry of userTable."
+ INDEX { userName }
+ ::= { userTable 1 }
+
+ UserEntry ::=
+ SEQUENCE {
+ userName DisplayString,
+ userPassword DisplayString,
+ userPriviledge INTEGER,
+ userRowStatus RowStatus
+ }
+
+ userName OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The user name."
+ ::= { userEntry 1 }
+
+ userPassword OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The user password."
+ ::= { userEntry 2 }
+
+ userPriviledge OBJECT-TYPE
+ SYNTAX INTEGER {
+ high(1),
+ middle(2),
+ low(3)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The user priviledge to decide what operation the user can and cannot do."
+ ::= { userEntry 3 }
+
+ userRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The row status used to create or delete a user."
+ ::= { userEntry 4 }
+
+ userAuthDefaultPriviledge OBJECT-TYPE
+ SYNTAX INTEGER {
+ high(1),
+ middle(2),
+ low(3),
+ deny(4)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The user default priviledge to be assigned when radius authentication succeds
+ but no user priviledge information(radius service-type) is provided."
+ ::= { user 6 }
+
+
+ stdioTimeout OBJECT-TYPE
+ SYNTAX INTEGER (0..360)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Set the stdio timeout, 0~360 minutes."
+ ::= { sys 12 }
+
+----------------------------------------
+-- statistics
+----------------------------------------
+
+ dhcpStats OBJECT IDENTIFIER ::= { statistics 11 }
+ paepvcStats OBJECT IDENTIFIER ::= { statistics 12 }
+-- igmpStats OBJECT IDENTIFIER ::= { statistics 2 }
+ macStats OBJECT IDENTIFIER ::= { statistics 13 }
+-- adslStats OBJECT IDENTIFIER ::= { statistics 4 }
+ shdslStats OBJECT IDENTIFIER ::= { statistics 14 }
+-- ipStats OBJECT IDENTIFIER ::= { statistics 6 }
+-- mstpStats OBJECT IDENTIFIER ::= { statistics 7 }
+ gbondStats OBJECT IDENTIFIER ::= { statistics 51 }
+
+--------------------
+-- DHCP
+--------------------
+
+-- dhcpSnoopIpTable
+
+ dhcpSnoopIpTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF DhcpSnoopIpEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table shows the IP addresses and netmasks offered by the DHCP server."
+ ::= { dhcpStats 1 }
+
+ dhcpSnoopIpEntry OBJECT-TYPE
+ SYNTAX DhcpSnoopIpEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry of dhcpSnoopIpTable."
+ INDEX { ifIndex, dhcpSnoopIp }
+ ::= { dhcpSnoopIpTable 1 }
+
+ DhcpSnoopIpEntry ::=
+ SEQUENCE {
+ dhcpSnoopIp IpAddress,
+ dhcpSnoopMac PhysAddress
+ }
+
+ dhcpSnoopIp OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The snooped IP address."
+ ::= { dhcpSnoopIpEntry 1 }
+
+ dhcpSnoopMac OBJECT-TYPE
+ SYNTAX PhysAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The snooped MAC address."
+ ::= { dhcpSnoopIpEntry 2 }
+
+-- dhcpSnoopCounterTable
+
+ dhcpSnoopCounterTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF DhcpSnoopCounterEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table shows the DHCP statistics."
+ ::= { dhcpStats 2 }
+
+ dhcpSnoopCounterEntry OBJECT-TYPE
+ SYNTAX DhcpSnoopCounterEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry of dhcpSnoopCounterTable."
+ INDEX { ifIndex }
+ ::= { dhcpSnoopCounterTable 1 }
+
+ DhcpSnoopCounterEntry ::=
+ SEQUENCE {
+ dhcpDiscovery Counter64,
+ dhcpOffer Counter64,
+ dhcpRequest Counter64,
+ dhcpAck Counter64,
+ dhcpAckBySnoopFull Counter64
+ }
+
+ dhcpDiscovery OBJECT-TYPE
+ SYNTAX Counter64
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of received DHCP server discovery packets."
+ ::= { dhcpSnoopCounterEntry 1 }
+
+ dhcpOffer OBJECT-TYPE
+ SYNTAX Counter64
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of received DHCP server offer packets."
+ ::= { dhcpSnoopCounterEntry 2 }
+
+ dhcpRequest OBJECT-TYPE
+ SYNTAX Counter64
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of received DHCP IP request packets."
+ ::= { dhcpSnoopCounterEntry 3 }
+
+ dhcpAck OBJECT-TYPE
+ SYNTAX Counter64
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of received DHCP IP acknowledge packets."
+ ::= { dhcpSnoopCounterEntry 4 }
+
+ dhcpAckBySnoopFull OBJECT-TYPE
+ SYNTAX Counter64
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of received DHCP IP acknowledge packets that replace the oldest snooping
+ entry in snooping table due to table full."
+ ::= { dhcpSnoopCounterEntry 5 }
+
+
+-- paepvcSessionTable
+
+ paepvcSessionTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF PaepvcSessionEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table shows the paepvc session statistics."
+ ::= { paepvcStats 1 }
+
+ paepvcSessionEntry OBJECT-TYPE
+ SYNTAX PaepvcSessionEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry of paepvcSessionTable."
+ INDEX { ifIndex , paepvcSessionVpi, paepvcSessionVci }
+ ::= { paepvcSessionTable 1 }
+
+ PaepvcSessionEntry ::=
+ SEQUENCE {
+ paepvcSessionVpi INTEGER,
+ paepvcSessionVci INTEGER,
+ paepvcSessionState INTEGER,
+ paepvcSessionId INTEGER,
+ paepvcSessionUptime Unsigned32,
+ paepvcSessionacname DisplayString,
+ paepvcSessionsrvcname DisplayString
+ }
+
+ paepvcSessionVpi OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The PAEPVC VPI."
+ ::= { paepvcSessionEntry 1 }
+
+ paepvcSessionVci OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The PAEPVC VCI."
+ ::= { paepvcSessionEntry 2 }
+
+ paepvcSessionState OBJECT-TYPE
+ SYNTAX INTEGER {
+ down(1),
+ pppoe(2),
+ ppp(3),
+ up(4)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The PAEPVC status."
+ ::= { paepvcSessionEntry 3 }
+
+ paepvcSessionId OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The PAEPVC session ID."
+ ::= { paepvcSessionEntry 4 }
+
+ paepvcSessionUptime OBJECT-TYPE
+ SYNTAX Unsigned32
+ UNITS "second"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The PAEPVC session uptime."
+ ::= { paepvcSessionEntry 5 }
+
+ paepvcSessionacname OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Access concentrator name."
+ ::= { paepvcSessionEntry 6 }
+
+ paepvcSessionsrvcname OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Service name."
+ ::= { paepvcSessionEntry 7 }
+
+
+-- paepvcCountTable
+
+ paepvcCountTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF PaepvcCountEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table shows the paepvc counters."
+ ::= { paepvcStats 2 }
+
+ paepvcCountEntry OBJECT-TYPE
+ SYNTAX PaepvcCountEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry of paepvcCountTable."
+ INDEX { ifIndex , paepvcCountVpi, paepvcCountVci }
+ ::= { paepvcCountTable 1 }
+
+ PaepvcCountEntry ::=
+ SEQUENCE {
+ paepvcCountVpi INTEGER,
+ paepvcCountVci INTEGER,
+ paepvcCountPppLcpCfgReqRx Unsigned32,
+ paepvcCountPppLcpEchoReqRx Unsigned32,
+ paepvcCountPppLcpEchoReplyRx Unsigned32,
+ paepvcCountPadiTx Unsigned32,
+ paepvcCountPadoRx Unsigned32,
+ paepvcCountPadrTx Unsigned32,
+ paepvcCountPadsRx Unsigned32,
+ paepvcCountPadtTx Unsigned32,
+ paepvcCountPadtRx Unsigned32,
+ paepvcCountSrvcnameErrRx Unsigned32,
+ paepvcCountAcSystemErrRx Unsigned32,
+ paepvcCountGenericErrTx Unsigned32,
+ paepvcCountGenericErrRx Unsigned32
+ }
+
+
+ paepvcCountVpi OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The PAEPVC VPI."
+ ::= { paepvcCountEntry 1 }
+
+ paepvcCountVci OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The PAEPVC VCI."
+ ::= { paepvcCountEntry 2 }
+
+ paepvcCountPppLcpCfgReqRx OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of ppp lcp config-request received."
+ ::= { paepvcCountEntry 3 }
+
+ paepvcCountPppLcpEchoReqRx OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of ppp lcp echo-request received."
+ ::= { paepvcCountEntry 4 }
+
+ paepvcCountPppLcpEchoReplyRx OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of ppp lcp echo-reply received."
+ ::= { paepvcCountEntry 5 }
+
+ paepvcCountPadiTx OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of pppoe padi transfered"
+ ::= { paepvcCountEntry 6 }
+
+ paepvcCountPadoRx OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of pppoe pado received"
+ ::= { paepvcCountEntry 7 }
+
+ paepvcCountPadrTx OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of pppoe padr transfered"
+ ::= { paepvcCountEntry 8 }
+
+ paepvcCountPadsRx OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of pppoe pads received"
+ ::= { paepvcCountEntry 9 }
+
+ paepvcCountPadtTx OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of pppoe padt transfered"
+ ::= { paepvcCountEntry 10 }
+
+ paepvcCountPadtRx OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of pppoe padt received"
+ ::= { paepvcCountEntry 11 }
+
+ paepvcCountSrvcnameErrRx OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of pppoe service name error received"
+ ::= { paepvcCountEntry 12 }
+
+ paepvcCountAcSystemErrRx OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of pppoe access concentrator name error received"
+ ::= { paepvcCountEntry 13 }
+
+ paepvcCountGenericErrTx OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of pppoe generic error transfered"
+ ::= { paepvcCountEntry 14 }
+
+ paepvcCountGenericErrRx OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of pppoe generic error received"
+ ::= { paepvcCountEntry 15 }
+
+
+--------------------
+-- MAC
+--------------------
+
+ macDisplayTarget OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This managed object is a filter used for identify the target from which
+ the MAC addresses are learned in macTable. The target could be:
+ 99: all ports in the system
+ 98: all subscriber ports
+ 97: all Ethernet ports
+
+ IfIndex is used for identifying subscriber ports and Ethernet Ports(e.g. 1 ~ 50)."
+ ::= { macStats 1 }
+
+-- macTable
+
+ macTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF MacEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table that contains information about unicast
+ entries for which the bridge has forwarding and/or
+ filtering information. This information is used
+ by the transparent bridging function in
+ determining how to propagate a received frame."
+ ::= { macStats 2 }
+
+ macEntry OBJECT-TYPE
+ SYNTAX MacEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry of macTable."
+ INDEX { macAddress }
+ ::= { macTable 1 }
+
+ MacEntry ::=
+ SEQUENCE {
+ macAddress MacAddress,
+ macPort INTEGER,
+ macStatus INTEGER
+ }
+
+ macAddress OBJECT-TYPE
+ SYNTAX MacAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A unicast MAC address for which the bridge has
+ forwarding and/or filtering information."
+ ::= { macEntry 1 }
+
+ macPort OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The port from which the mac address has been learned."
+ ::= { macEntry 2 }
+
+ macStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ other(1),
+ invalid(2),
+ learned(3),
+ self(4),
+ mgmt(5)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The status of this entry."
+ ::= { macEntry 3 }
+
+
+--------------------
+-- SHDSL
+--------------------
+
+-- shdslLinePerfTable
+
+ shdslLinePerfTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF ShdslLinePerfEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The table displays SHDSL line performance."
+ ::= { shdslStats 1 }
+
+ shdslLinePerfEntry OBJECT-TYPE
+ SYNTAX ShdslLinePerfEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry of shdslLinePerfTable."
+ INDEX { ifIndex }
+ ::= { shdslLinePerfTable 1 }
+
+ ShdslLinePerfEntry ::=
+ SEQUENCE {
+ shdslLinePerfEs Counter,
+ shdslLinePerfSes Counter,
+ shdslLinePerfCrc Counter,
+ shdslLinePerfLosws Counter,
+ shdslLinePerfUas Counter,
+ shdslLinePerfSegmentAnomalies Counter,
+ shdslLinePerfSegmentDefect Counter
+ }
+
+ shdslLinePerfEs OBJECT-TYPE
+ SYNTAX Counter
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Count of Errored Seconds (ES) on this endpoint since link up."
+ ::= { shdslLinePerfEntry 1 }
+
+ shdslLinePerfSes OBJECT-TYPE
+ SYNTAX Counter
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Count of Severely Errored Seconds (SES) on this endpoint since link up."
+ ::= { shdslLinePerfEntry 2 }
+
+ shdslLinePerfCrc OBJECT-TYPE
+ SYNTAX Counter
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Count of CRC anomalies on this endpoint since link up."
+ ::= { shdslLinePerfEntry 3 }
+
+ shdslLinePerfLosws OBJECT-TYPE
+ SYNTAX Counter
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Count of Loss of Sync Word (LOSW) Seconds on this endpoint since link up."
+ ::= { shdslLinePerfEntry 4 }
+
+ shdslLinePerfUas OBJECT-TYPE
+ SYNTAX Counter
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Count of Unavailable Seconds (UAS) on this endpoint since link up."
+ ::= { shdslLinePerfEntry 5 }
+
+ shdslLinePerfSegmentAnomalies OBJECT-TYPE
+ SYNTAX Counter
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Count of Segment Anomalies on this endpoint since link up."
+ ::= { shdslLinePerfEntry 6 }
+
+ shdslLinePerfSegmentDefect OBJECT-TYPE
+ SYNTAX Counter
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Count of Segment Defects on this endpoint since link up."
+ ::= { shdslLinePerfEntry 7 }
+
+--------------------
+-- IGMP
+--------------------
+
+ igmpQueryCntTotal OBJECT-TYPE
+ SYNTAX Counter
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of IGMP query messages received."
+ ::= { statistics 1 }
+
+ igmpReportCntTotal OBJECT-TYPE
+ SYNTAX Counter
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of IGMP report messages received."
+ ::= { statistics 2 }
+
+ igmpLeaveCntTotal OBJECT-TYPE
+ SYNTAX Counter
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of IGMP leave messages received."
+ ::= { statistics 3 }
+
+ igmpNumOfActiveGroups OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of IGMP learned groups."
+ ::= { statistics 4 }
+
+
+
+-- igmp Group Table
+ igmpGroupTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF IgmpGroupEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table includes igmp group information."
+ ::= { statistics 5 }
+
+ igmpGroupEntry OBJECT-TYPE
+ SYNTAX IgmpGroupEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry in igmpGroupTable."
+ INDEX { igmpGroupIp }
+ ::= { igmpGroupTable 1 }
+
+ IgmpGroupEntry ::=
+ SEQUENCE {
+ igmpGroupIp IpAddress,
+ igmpGroupvid INTEGER,
+ igmpGroupnumberOfMembers INTEGER,
+ igmpGroupMemberPorts PortList
+
+ }
+
+ igmpGroupIp OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "igmp group IP"
+ ::= { igmpGroupEntry 1 }
+
+ igmpGroupvid OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "vlan id"
+ ::= { igmpGroupEntry 2 }
+
+ igmpGroupnumberOfMembers OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "number Of Members"
+
+ ::= { igmpGroupEntry 3 }
+
+ igmpGroupMemberPorts OBJECT-TYPE
+ SYNTAX PortList
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Group Member Ports"
+
+ ::= { igmpGroupEntry 4 }
+
+
+
+
+-- igmp Group port Entry
+ igmpGroupPortTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF IgmpGroupPortEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table includes igmp Group port information."
+ ::= { statistics 6 }
+
+ igmpGroupPortEntry OBJECT-TYPE
+ SYNTAX IgmpGroupPortEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry in igmpGroupPortTable."
+ INDEX { ifIndex , igmpGroupPortIp , igmpGroupPortvid}
+ ::= { igmpGroupPortTable 1 }
+
+ IgmpGroupPortEntry ::=
+ SEQUENCE {
+ igmpGroupPortIp IpAddress,
+ igmpGroupPortvid INTEGER
+ }
+
+ igmpGroupPortIp OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Igmp Group IP"
+ ::= { igmpGroupPortEntry 1 }
+
+ igmpGroupPortvid OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Igmp Group vid"
+ ::= { igmpGroupPortEntry 2 }
+
+
+-- igmpGroupTableV2
+
+ igmpGroupTableV2 OBJECT-TYPE
+ SYNTAX SEQUENCE OF IgmpGroupEntryV2
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table that displays IGMP learned group member information."
+ ::= { statistics 7 }
+
+ igmpGroupEntryV2 OBJECT-TYPE
+ SYNTAX IgmpGroupEntryV2
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry of igmpGroupTableV2."
+ INDEX { igmpGroupVid, igmpGroupIp }
+ ::= { igmpGroupTableV2 1 }
+
+ IgmpGroupEntryV2 ::=
+ SEQUENCE {
+ igmpGroupVid VlanIndex,
+ igmpGroupIp IpAddress,
+ igmpGroupNumOfMembers INTEGER,
+ igmpGroupMemberPorts PortList
+ }
+
+ igmpGroupVid OBJECT-TYPE
+ SYNTAX VlanIndex
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The IGMP group VLAN ID."
+ ::= { igmpGroupEntryV2 1 }
+
+ igmpGroupIp OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The multicast IP address."
+ ::= { igmpGroupEntryV2 2 }
+
+ igmpGroupNumOfMembers OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of member ports in the group."
+ ::= { igmpGroupEntryV2 3 }
+
+ igmpGroupMemberPorts OBJECT-TYPE
+ SYNTAX PortList
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The member port list of the group."
+ ::= { igmpGroupEntryV2 4 }
+
+-- igmpGroupPortTableV2
+
+ igmpGroupPortTableV2 OBJECT-TYPE
+ SYNTAX SEQUENCE OF IgmpGroupPortEntryV2
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table that displays IGMP joined groups in this port."
+ ::= { statistics 8 }
+
+ igmpGroupPortEntryV2 OBJECT-TYPE
+ SYNTAX IgmpGroupPortEntryV2
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry of igmpGroupPortTableV2."
+ INDEX { ifIndex, igmpGroupPortVid, igmpGroupPortIp, igmpGroupPortSourceIp }
+ ::= { igmpGroupPortTableV2 1 }
+
+ IgmpGroupPortEntryV2 ::=
+ SEQUENCE {
+ igmpGroupPortVid VlanIndex,
+ igmpGroupPortIp IpAddress,
+ igmpGroupPortSourceIp IpAddress
+ }
+
+ igmpGroupPortVid OBJECT-TYPE
+ SYNTAX VlanIndex
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The IGMP group VLAN ID."
+ ::= { igmpGroupPortEntryV2 1 }
+
+ igmpGroupPortIp OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The multicast IP address."
+ ::= { igmpGroupPortEntryV2 2 }
+
+ igmpGroupPortSourceIp OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The source IP address that joins the IGMP group."
+ ::= { igmpGroupPortEntryV2 3 }
+
+
+-- igmpPortCtrlPduTable
+
+ igmpPortCtrlPduTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF IgmpPortCtrlPduEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table that displays IGMP related counter values in this port."
+ ::= { statistics 9 }
+
+ igmpPortCtrlPduEntry OBJECT-TYPE
+ SYNTAX IgmpPortCtrlPduEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry of igmpPortCtrlPduTable."
+ INDEX { ifIndex }
+ ::= { igmpPortCtrlPduTable 1 }
+
+ IgmpPortCtrlPduEntry ::=
+ SEQUENCE {
+ igmpPortCtrlPduQueryCnt Counter,
+ igmpPortCtrlPduReportCnt Counter,
+ igmpPortCtrlPduLeaveCnt Counter,
+ igmpPortNumOfActiveGroups INTEGER
+ }
+
+ igmpPortCtrlPduQueryCnt OBJECT-TYPE
+ SYNTAX Counter
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of IGMP query messages received in this port."
+ ::= { igmpPortCtrlPduEntry 1 }
+
+ igmpPortCtrlPduReportCnt OBJECT-TYPE
+ SYNTAX Counter
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of IGMP report messages received in this port."
+ ::= { igmpPortCtrlPduEntry 2 }
+
+ igmpPortCtrlPduLeaveCnt OBJECT-TYPE
+ SYNTAX Counter
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of IGMP leave messages received in this port."
+ ::= { igmpPortCtrlPduEntry 3 }
+
+ igmpPortNumOfActiveGroups OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of active IGMP groups in this port."
+ ::= { igmpPortCtrlPduEntry 4 }
+
+--------------------
+-- G.Bond State
+--------------------
+-- gbondStateTable
+
+ gbondStateTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GbondStateEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table containing the G.Bond configuration information for
+ each bonding group of the device."
+ ::= { gbondStats 1 }
+
+ gbondStateEntry OBJECT-TYPE
+ SYNTAX GbondStateEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry of gbondTable."
+ INDEX { gbondStateName }
+ ::= { gbondStateTable 1 }
+
+ GbondStateEntry ::=
+ SEQUENCE {
+ gbondStateName OCTET STRING,
+ gbondStateSid INTEGER,
+ gbondStateUpRate Unsigned32,
+ gbondStateDownRate Unsigned32,
+ gbondStateMember OCTET STRING,
+ gbondStatelinkup OCTET STRING,
+ gbondStateTx OCTET STRING,
+ gbondStateRx OCTET STRING,
+ gbondStatelinkdown OCTET STRING
+ }
+
+ gbondStateName OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (0..31))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "An administratively assigned string, which identifies the bonding group."
+ ::= { gbondStateEntry 1 }
+
+ gbondStateSid OBJECT-TYPE
+ SYNTAX INTEGER {
+ sid8(1),
+ sid12(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object indicates the sequence index mode of the bonding group."
+ ::= { gbondStateEntry 2 }
+
+
+ gbondStateUpRate OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The current up stream rate."
+ ::= { gbondStateEntry 3 }
+
+ gbondStateDownRate OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The current down stream rate."
+ ::= { gbondStateEntry 4 }
+
+ gbondStateMember OBJECT-TYPE
+ SYNTAX OCTET STRING
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicate if the port is a member port of the bonding group.
+ The target is encoded
+ as:
+ Byte 1: the octet specifies a set of eight Chassis, Chassis 0 through 7
+ Byte 2~3: each octet specifies a set of eight slots, with the
+ first octet specifying slots 1 through 8 and the second
+ octet specifying slots 9 through 16.
+ Byte 4: reserved
+ Byte 5: Each bit in the octet specifies a port from MSB to LSB.
+ for example: 32(hex) = 50(dec) = 00110010(bin) means the port 3, 4 and 7."
+ ::= { gbondStateEntry 5 }
+
+ gbondStatelinkup OBJECT-TYPE
+ SYNTAX OCTET STRING
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicate if the link status of port is bidirectional.
+ The target is encoded
+ as:
+ Byte 1: the octet specifies a set of eight Chassis, Chassis 0 through 7
+ Byte 2~3: each octet specifies a set of eight slots, with the
+ first octet specifying slots 1 through 8 and the second
+ octet specifying slots 9 through 16.
+ Byte 4: reserved
+ Byte 5: Each bit in the octet specifies a port from MSB to LSB.
+ for example: 32(hex) = 50(dec) = 00110010(bin) means the port 3, 4 and 7."
+ ::= { gbondStateEntry 6 }
+
+ gbondStateTx OBJECT-TYPE
+ SYNTAX OCTET STRING
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicate if the link status of port is Tx only.
+ The target is encoded
+ as:
+ Byte 1: the octet specifies a set of eight Chassis, Chassis 0 through 7
+ Byte 2~3: each octet specifies a set of eight slots, with the
+ first octet specifying slots 1 through 8 and the second
+ octet specifying slots 9 through 16.
+ Byte 4: reserved
+ Byte 5: Each bit in the octet specifies a port from MSB to LSB.
+ for example: 32(hex) = 50(dec) = 00110010(bin) means the port 3, 4 and 7."
+ ::= { gbondStateEntry 7 }
+
+ gbondStateRx OBJECT-TYPE
+ SYNTAX OCTET STRING
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicate if the link status of port is Rx only.
+ The target is encoded
+ as:
+ Byte 1: the octet specifies a set of eight Chassis, Chassis 0 through 7
+ Byte 2~3: each octet specifies a set of eight slots, with the
+ first octet specifying slots 1 through 8 and the second
+ octet specifying slots 9 through 16.
+ Byte 4: reserved
+ Byte 5: Each bit in the octet specifies a port from MSB to LSB.
+ for example: 32(hex) = 50(dec) = 00110010(bin) means the port 3, 4 and 7."
+ ::= { gbondStateEntry 8 }
+
+ gbondStatelinkdown OBJECT-TYPE
+ SYNTAX OCTET STRING
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicate if the link status of the port is down.
+ The target is encoded
+ as:
+ Byte 1: the octet specifies a set of eight Chassis, Chassis 0 through 7
+ Byte 2~3: each octet specifies a set of eight slots, with the
+ first octet specifying slots 1 through 8 and the second
+ octet specifying slots 9 through 16.
+ Byte 4: reserved
+ Byte 5: Each bit in the octet specifies a port from MSB to LSB.
+ for example: 32(hex) = 50(dec) = 00110010(bin) means the port 3, 4 and 7."
+ ::= { gbondStateEntry 9 }
+
+
+----------------------------------------
+-- clear
+----------------------------------------
+
+ counterClearTarget OBJECT-TYPE
+ SYNTAX OCTET STRING
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This managed object is used for identify the target on which
+ the counter would be cleared. The target is encoded as:
+ Byte 1: reserved
+ Byte 2~3: reserved
+ Byte 4: reserved
+ Byte 5~11:each octet specifies a set of eight ports, with the first
+ octet specifying ports 1 through 8, etc."
+ ::= { clear 1 }
+
+ counterClearOps OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The corresponding bit is set to 1 to start the operation.
+ The various bit positions are:
+ BIT 1: clear interface counters
+ BIT 2: clear pvc packet counters
+ BIT 3: clear port ATM counters
+ BIT 4: clear pvc ATM counters
+ BIT 5: clear DHCP counters
+ BIT 6: clear IGMP counters
+ BIT 7: clear IGMP port counters"
+ ::= { clear 2 }
+
+ counterClearVpi OBJECT-TYPE
+ SYNTAX INTEGER (0..255)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "VPI of the pvc whose counters would be cleared."
+ ::= { clear 3 }
+
+ counterClearVci OBJECT-TYPE
+ SYNTAX INTEGER (1..65535)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "VCI of the pvc whose counters would be cleared."
+ ::= { clear 4 }
+
+
+----------------------------------------
+-- trap
+----------------------------------------
+
+ object OBJECT IDENTIFIER ::= { trap 1 }
+-- dsl OBJECT IDENTIFIER ::= { trap 2 }
+ equipment OBJECT IDENTIFIER ::= { trap 3 }
+ systrap OBJECT IDENTIFIER ::= { trap 4 }
+-- enet OBJECT IDENTIFIER ::= { trap 5 }
+
+--------------------
+-- object
+--------------------
+
+ eqptAlarmInputIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The index of alarm input."
+ ::= { object 2 }
+
+ eqptAlarmInputName OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Name of alarm input."
+ ::= { object 8 }
+
+ sysMacAntiSpoofOrig OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Original port of Mac-AntiSpoofing."
+ ::= { object 9 }
+
+ sysMacAntiSpoofNew OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The New port of Mac-AntiSpoofing."
+ ::= { object 10 }
+
+ sysMacAntiSpoofMAC OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The MAC of Mac-AntiSpoofing."
+ ::= { object 11 }
+
+--------------------
+-- equipment
+--------------------
+
+ eqptHWMonitorFailure NOTIFICATION-TYPE
+ STATUS current
+ DESCRIPTION
+ "Hardware monitor diagnosis is failed."
+ ::= { equipment 1 }
+
+--------------------
+-- systrap
+--------------------
+
+ sysMacAntiSpoofing NOTIFICATION-TYPE
+ OBJECTS {
+ sysMacAntiSpoofOrig,
+ sysMacAntiSpoofNew,
+ sysMacAntiSpoofMAC
+ }
+ STATUS current
+ DESCRIPTION
+ "MAC Anti-spoofing."
+ ::= { systrap 1 }
+
+ sysAlarmCutoffEnable NOTIFICATION-TYPE
+ STATUS current
+ DESCRIPTION
+ "Alarm cutoff is activated."
+ ::= { systrap 2 }
+
+ sysAlarmClearEnable NOTIFICATION-TYPE
+ STATUS current
+ DESCRIPTION
+ "Alarm clear is activated."
+ ::= { systrap 3 }
+
+ sysLoginFailure NOTIFICATION-TYPE
+ STATUS current
+ DESCRIPTION
+ "User login is failed."
+ ::= { systrap 4 }
+
+-------------------------------
+-- 2684 routed mode pvc (rpvc)
+-------------------------------
+
+-- Routed Gateway Table
+
+ rpvcGatewayTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF RpvcGatewayEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table includes Routed Gateway configuration."
+ ::= { rpvc 1 }
+
+ rpvcGatewayEntry OBJECT-TYPE
+ SYNTAX RpvcGatewayEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry in Routed Gateway table."
+ INDEX { rpvcGatewayIp }
+ ::= { rpvcGatewayTable 1 }
+
+ RpvcGatewayEntry ::=
+ SEQUENCE {
+ rpvcGatewayIp IpAddress,
+ rpvcGatewayVlanId VlanIndex,
+ rpvcGatewayRowStatus RowStatus,
+ rpvcGatewayPriority INTEGER
+ }
+
+ rpvcGatewayIp OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "IP of RPVC gateway."
+ ::= { rpvcGatewayEntry 1 }
+
+ rpvcGatewayVlanId OBJECT-TYPE
+ SYNTAX VlanIndex
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Vlan id send to this RPVC gateway."
+ ::= { rpvcGatewayEntry 2 }
+
+ rpvcGatewayRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object is used to create a new row or delete an existing row in this table."
+ ::= { rpvcGatewayEntry 3 }
+
+ rpvcGatewayPriority OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "802.1p p bit send to this RPVC gateway."
+ ::= { rpvcGatewayEntry 4 }
+
+
+-- Routed PVC Table
+
+ rpvcTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF RpvcTableEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table includes RPVC configuration."
+ ::= { rpvc 2 }
+
+ rpvcTableEntry OBJECT-TYPE
+ SYNTAX RpvcTableEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry in rpvcTable."
+ INDEX { ifIndex, rpvcVpi, rpvcVci, rpvcIp, rpvcNetmask }
+ ::= { rpvcTable 1 }
+
+ RpvcTableEntry ::=
+ SEQUENCE {
+ rpvcVpi INTEGER,
+ rpvcVci INTEGER,
+ rpvcDSProfile DisplayString,
+ rpvcUSProfile DisplayString,
+ rpvcIp IpAddress,
+ rpvcNetmask IpAddress,
+ rpvcGatewayIpAddress IpAddress,
+ rpvcRowStatus RowStatus
+ }
+
+ rpvcVpi OBJECT-TYPE
+ SYNTAX INTEGER (0..255)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "VPI of the rpvc."
+ ::= { rpvcTableEntry 1 }
+
+ rpvcVci OBJECT-TYPE
+ SYNTAX INTEGER (1..65535)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "VCI of the rpvc."
+ ::= { rpvcTableEntry 2 }
+
+ rpvcDSProfile OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (1..31))
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The down stream profile of the rpvc."
+ ::= { rpvcTableEntry 3 }
+
+ rpvcUSProfile OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (1..31))
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The up stream profile of the rpvc."
+ ::= { rpvcTableEntry 4 }
+
+ rpvcIp OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The IP of the rpvc."
+ ::= { rpvcTableEntry 5 }
+
+ rpvcNetmask OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The IP mask of the rpvc IP."
+ ::= { rpvcTableEntry 6 }
+
+ rpvcGatewayIpAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The gateway IP of rpvc."
+ ::= { rpvcTableEntry 7 }
+
+ rpvcRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object is used to create a new row or delete an existing row in this table."
+ ::= { rpvcTableEntry 8 }
+
+-- Routed PVC Routed Domain Table
+
+ rpvcRouteDomainTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF RpvcRouteDomainTableEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table includes RPVC route domain configuration."
+ ::= { rpvc 3 }
+
+ rpvcRouteDomainTableEntry OBJECT-TYPE
+ SYNTAX RpvcRouteDomainTableEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry in rpvcRouteDomainTable."
+ INDEX { ifIndex, rpvcRouteDomainVpi, rpvcRouteDomainVci, rpvcRouteDomainIp, rpvcRouteDomainNetmask }
+ ::= { rpvcRouteDomainTable 1 }
+
+ RpvcRouteDomainTableEntry ::=
+ SEQUENCE {
+ rpvcRouteDomainVpi INTEGER,
+ rpvcRouteDomainVci INTEGER,
+ rpvcRouteDomainIp IpAddress,
+ rpvcRouteDomainNetmask IpAddress,
+ rpvcRouteDomainRowStatus RowStatus
+ }
+
+ rpvcRouteDomainVpi OBJECT-TYPE
+ SYNTAX INTEGER (0..255)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "VPI of the rpvc."
+ ::= { rpvcRouteDomainTableEntry 1 }
+
+ rpvcRouteDomainVci OBJECT-TYPE
+ SYNTAX INTEGER (1..65535)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "VCI of the rpvc."
+ ::= { rpvcRouteDomainTableEntry 2 }
+
+ rpvcRouteDomainIp OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The route domain IP."
+ ::= { rpvcRouteDomainTableEntry 3 }
+
+ rpvcRouteDomainNetmask OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The IP mask of the route domain IP."
+ ::= { rpvcRouteDomainTableEntry 4 }
+
+ rpvcRouteDomainRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object is used to create a new row or delete an existing row in this table."
+ ::= { rpvcRouteDomainTableEntry 5 }
+
+ rpvcArpAgingTime OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Set RPVC ARP proxy aging time 10..10000 seconds,
+ 0 to disable againg."
+ ::= { rpvc 4 }
+
+ rpvcArpFlush OBJECT-TYPE
+ SYNTAX INTEGER {
+ enable(1)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Flush the RPVC ARP proxy table."
+ ::= { rpvc 5 }
+
+-- DS Bcast diable control Table
+
+ dsBcastDisableTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF DsBcastDisableEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table includes Down Stream Bcast configuration."
+ ::= { port 9 }
+
+ dsBcastDisableEntry OBJECT-TYPE
+ SYNTAX DsBcastDisableEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry in Down Stream Bcast table."
+ INDEX { ifIndex, dsBcastDisableVlanId }
+ ::= { dsBcastDisableTable 1 }
+
+ DsBcastDisableEntry ::=
+ SEQUENCE {
+ dsBcastDisableVlanId INTEGER,
+ dsBcastDisableRowStatus RowStatus
+ }
+
+ dsBcastDisableVlanId OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "downstream broadcast disabled vid."
+ ::= { dsBcastDisableEntry 1 }
+
+ dsBcastDisableRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object is used to create a new row or delete an existing row in this table."
+ ::= { dsBcastDisableEntry 2 }
+
+END
generated by cgit v1.2.3 (git 2.46.0) at 2026-02-26 10:20:24 +0000