Initial commitHEADmain

1 files changed, 353 insertions, 0 deletions

diff --git a/MIBS/telco-systems/binos/PRVT-SWITCH-IPVLAN-MIB b/MIBS/telco-systems/binos/PRVT-SWITCH-IPVLAN-MIB
new file mode 100644
index 0000000..338c079
--- /dev/null
+++ b/MIBS/telco-systems/binos/PRVT-SWITCH-IPVLAN-MIB
@@ -0,0 +1,353 @@
+-- *********************************************************************
+-- *********************************************************************
+-- ** Filename: PRVT-SWITCH-IPVLAN-MIB
+-- ** Project: T - Ethernet and Fast Ethernet IP Switches.
+-- ** Purpose: Private MIB
+-- *********************************************************************
+-- (c) Copyright, 2001, BATM Advanced Communications. All rights reserved.
+-- WARNING:
+--
+-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING:
+--
+-- This file is the property of BATM Advanced Communications.
+-- BATM Advanced Communications retains all title and
+-- ownership in the Specification, including any revisions.
+
+-- BATM Advanced Communications grants all interested parties a non-exclusive
+-- license to use and distribute an unmodified copy of this
+-- Specification in connection with management of BATM Advanced Communications 
+-- and Telco Systems products, and without fee, provided that the following
+-- conditions are met:
+-- 1. Redistributions of this specification must retain the above copyright
+-- notice, this list of conditions and the following disclaimer.
+-- 2. Redistributions in binary form must reproduce the above copyright
+-- notice, this list of conditions and the following disclaimer in the
+-- documentation and/or other materials provided with the distribution.
+-- 3. The name of the BATM Advanced Communications MAY NOT be used to endorse
+-- or promote products derived from this specification without specific prior written
+-- permission.
+--
+-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED
+-- WARRANTY, THE SPECIFICATIONS CONTAINED IN THIS FILE ARE
+-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
+-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
+-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER
+-- INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
+-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR
+-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY
+-- TO USE, THE SPECIFICATION CONTAINED IN THIS FILE.
+
+PRVT-SWITCH-IPVLAN-MIB DEFINITIONS ::= BEGIN
+IMPORTS
+    --IpAddress
+    --    FROM RFC1155-SMI
+    MODULE-IDENTITY, OBJECT-TYPE,IpAddress
+        FROM SNMPv2-SMI
+    RowStatus, TruthValue, DisplayString, TEXTUAL-CONVENTION, MacAddress
+        FROM SNMPv2-TC
+    ifIndex 
+		FROM IF-MIB
+    dot1qVlanIndex
+        FROM Q-BRIDGE-MIB
+    ipSwitch   
+	                                     FROM PRVT-SWITCH-MIB;  
+
+
+    prvtSwitchIpVLANMib MODULE-IDENTITY
+    LAST-UPDATED "200801010000Z"
+    ORGANIZATION "BATM Advanced Communication"
+    CONTACT-INFO
+        "BATM/Telco Systems Support team
+				Email: 
+				For North America: techsupport@telco.com
+				For North Europe: support@batm.de, info@batm.de
+				For the rest of the world: techsupport@telco.com"
+
+    DESCRIPTION
+        "The IpVLAN MIB module that controls the assignment of IP subnets 
+        to VLANs in L3 switches."
+
+    -- revision history
+         REVISION     "200801010000Z"
+     	 DESCRIPTION
+		"Removed redefined OIDs in private vendor extension definitions." 
+     REVISION     "200611030959Z"
+    DESCRIPTION
+        "Fixed Some generic object declarations (ACCESS to MAX-ACCESS)
+Status set to current
+added table for loopback interfaces"
+     REVISION     "200502160959Z"
+    DESCRIPTION
+        "Fixed syntax errors and updated the contact info."
+    REVISION     "200011240959Z"
+    DESCRIPTION
+        "Initial version."
+
+    ::= { ipSwitch 2 }
+
+
+    ipInterface OBJECT IDENTIFIER ::= { prvtSwitchIpVLANMib 1 }
+    ipVLAN     OBJECT IDENTIFIER ::= { prvtSwitchIpVLANMib 2 }
+
+-- ****************
+-- ipInterfaceTable
+-- ****************
+
+    ipInterfaceTable OBJECT-TYPE
+    SYNTAX SEQUENCE OF IpInterfaceEntry
+	MAX-ACCESS not-accessible
+	STATUS current
+	DESCRIPTION
+        "This table controls the creation of IP interfaces (subnets)."
+	::= { ipInterface 1 }
+
+    ipInterfaceEntry OBJECT-TYPE
+	SYNTAX	IpInterfaceEntry
+	MAX-ACCESS	not-accessible
+	STATUS current
+	DESCRIPTION
+	    ""
+    INDEX { ipInterfaceName }
+	::= { ipInterfaceTable 1 }
+
+    IpInterfaceEntry ::= SEQUENCE {
+        ipInterfaceName            INTEGER,
+        ipInterfaceIndex           INTEGER,
+        ipInterfaceType            INTEGER,
+        ipInterfaceIpAddress       IpAddress,
+        ipInterfaceSubnetMask      IpAddress,
+        ipInterfaceRowStatus       RowStatus
+    }
+
+    ipInterfaceName OBJECT-TYPE
+    SYNTAX INTEGER(0..256)
+	MAX-ACCESS read-only
+	STATUS current
+	DESCRIPTION
+        "This object identifies the name of the IP interface, serves as an 
+        index to this table name, and can only be changed during row creation. 
+        The name is the integer part of the interface name; sw1 will be 1, sw5 
+        will be 5 etc.."
+	::= { ipInterfaceEntry 1 }
+	
+	ipInterfaceIndex OBJECT-TYPE
+    SYNTAX INTEGER
+	MAX-ACCESS read-only
+	STATUS current
+	DESCRIPTION
+        "This object identifies the index of the IP interface. 
+        This is the same index as ipAdEntIfIndex from MIB-II (ipAddrTable)."
+	::= { ipInterfaceEntry 2 }
+
+    ipInterfaceType OBJECT-TYPE
+	SYNTAX INTEGER
+	{
+	  pseudoInterface (1),
+	  ipInterface     (2)
+	}
+	MAX-ACCESS read-create
+	STATUS current
+	DESCRIPTION
+        "This indicates a status of the IP interface. The value of this object 
+        is determined by the IP address. If the IP address field is 
+        empty (0.0.0.0) then this interface becomes a pseudo interface."
+    ::= { ipInterfaceEntry 3 }
+
+	ipInterfaceIpAddress OBJECT-TYPE
+	SYNTAX IpAddress
+	MAX-ACCESS read-create
+	STATUS current
+	DESCRIPTION
+	    "This object has the value of the switch IP address in this subnet. 
+	    A value of 0.0.0.0 will make this interface a pseudo interface."
+    ::= { ipInterfaceEntry 4 }
+
+	ipInterfaceSubnetMask OBJECT-TYPE
+	SYNTAX IpAddress
+	MAX-ACCESS read-create
+	STATUS current
+	DESCRIPTION
+	    "This object together with ipInterfaceIpAddress forms the IP 
+	    subnet, assigned to this IP interface. In case that ipInterfaceIpAddress 
+	    has the value of 0.0.0.0, this object will be ignored."
+    ::= { ipInterfaceEntry 5 }
+
+    ipInterfaceRowStatus OBJECT-TYPE
+	SYNTAX RowStatus
+	MAX-ACCESS read-create
+	STATUS current
+	DESCRIPTION
+	    "This object indicates that the row status, and enables the creation & 
+	    deletion of rows in this table. See SNMPv2-TC for more information."
+    ::= { ipInterfaceEntry 6 }
+
+-- ****************
+-- ipLoInterfaceTable
+-- ****************
+
+    ipLoInterfaceTable OBJECT-TYPE
+    SYNTAX SEQUENCE OF IpLoInterfaceEntry
+	MAX-ACCESS not-accessible
+	STATUS current
+	DESCRIPTION
+        "This table controls the creation of IP LoopBack interfaces."
+	::= { ipInterface 2 }
+
+    ipLoInterfaceEntry OBJECT-TYPE
+	SYNTAX	IpLoInterfaceEntry
+	MAX-ACCESS	not-accessible
+	STATUS	current
+	DESCRIPTION
+	    ""
+    INDEX { ipLoInterfaceName }
+	::= { ipLoInterfaceTable 1 }
+
+    IpLoInterfaceEntry ::= SEQUENCE {
+        ipLoInterfaceName            INTEGER,
+        ipLoInterfaceIndex           INTEGER,
+        ipLoInterfaceType            INTEGER,
+        ipLoInterfaceIpAddress       IpAddress,
+        ipLoInterfaceSubnetMask      IpAddress,
+        ipLoInterfaceRowStatus       RowStatus
+    }
+
+    ipLoInterfaceName OBJECT-TYPE
+    SYNTAX INTEGER(1..9)
+	MAX-ACCESS read-only
+	STATUS current
+	DESCRIPTION
+        "This object identifies the name of the IP interface, serves as an 
+        index to this table name, and can only be changed during row creation. 
+        The name is the integer part of the interface name; lo1 will be 1, lo5 
+        will be 5 etc.."
+	::= { ipLoInterfaceEntry 1 }
+	
+	ipLoInterfaceIndex OBJECT-TYPE
+    SYNTAX INTEGER
+	MAX-ACCESS read-only
+	STATUS current
+	DESCRIPTION
+        "This object identifies the index of the IP interface. 
+        This is the same index as ipAdEntIfIndex from MIB-II (ipAddrTable)."
+	::= { ipLoInterfaceEntry 2 }
+
+    ipLoInterfaceType OBJECT-TYPE
+	SYNTAX INTEGER
+	{
+	  pseudoInterface (1),
+	  ipInterface     (2)
+	}
+	MAX-ACCESS read-create
+	STATUS current
+	DESCRIPTION
+        "This indicates a status of the IP interface. The value of this object 
+        is determined by the IP address. If the IP address field is 
+        empty (0.0.0.0) then this interface becomes a pseudo interface."
+    ::= { ipLoInterfaceEntry 3 }
+
+	ipLoInterfaceIpAddress OBJECT-TYPE
+	SYNTAX IpAddress
+	MAX-ACCESS read-create
+	STATUS current
+	DESCRIPTION
+	    "This object has the value of the switch IP address in this subnet. 
+	    A value of 0.0.0.0 will make this interface a pseudo interface."
+    ::= { ipLoInterfaceEntry 4 }
+
+	ipLoInterfaceSubnetMask OBJECT-TYPE
+	SYNTAX IpAddress
+	MAX-ACCESS read-create
+	STATUS current
+	DESCRIPTION
+	    "This object together with ipInterfaceIpAddress forms the IP 
+	    subnet, assigned to this IP interface. In case that ipInterfaceIpAddress 
+	    has the value of 0.0.0.0, this object will be ignored."
+    ::= { ipLoInterfaceEntry 5 }
+
+  ipLoInterfaceRowStatus OBJECT-TYPE
+	SYNTAX RowStatus
+	MAX-ACCESS read-create
+	STATUS current
+	DESCRIPTION
+	    "This object indicates that the row status, and enables the creation & 
+	    deletion of rows in this table. See SNMPv2-TC for more information."
+    ::= { ipLoInterfaceEntry 6 }
+
+
+-- ***********
+-- ipVLANTable
+-- ***********
+
+    ipVLANTable OBJECT-TYPE
+    SYNTAX SEQUENCE OF IpVLANEntry
+	MAX-ACCESS not-accessible
+	STATUS current
+	DESCRIPTION
+        "This table extends the table dot1qVlanStaticTable from Q-BRIDGE-MIB. 
+        It gives a connection between the IP Interface & the IP VLAN."
+	::= { ipVLAN 1 }
+
+    ipVLANEntry OBJECT-TYPE
+	SYNTAX	IpVLANEntry
+	MAX-ACCESS	not-accessible
+	STATUS current
+	DESCRIPTION
+	    ""
+    INDEX { dot1qVlanIndex, ipInterfaceName}
+   	::= { ipVLANTable 1 }
+
+    IpVLANEntry ::= SEQUENCE {
+        ipVLANStatus      INTEGER
+    }
+
+    ipVLANStatus OBJECT-TYPE
+	SYNTAX INTEGER
+	{
+	  attached (1),
+	  detached (2)
+	}
+	MAX-ACCESS read-create
+	STATUS current
+	DESCRIPTION
+	    "This object shows the VLAN on which the interface in the index 
+	    of the entry is installed and vice versa. See SNMPv2-TC for 
+	    more information."
+    ::= { ipVLANEntry 1 }
+
+   ipPortMappingTable OBJECT-TYPE
+    SYNTAX SEQUENCE OF IpPortMappingEntry
+	MAX-ACCESS not-accessible
+	STATUS current
+	DESCRIPTION
+        "This table serves to map physical ports to SW interfaces in their 1:1 relationship. 
+        This means that we can map only one SW interface on a "
+	::= { ipVLAN 2 }
+  
+  ipPortMappingEntry OBJECT-TYPE
+	SYNTAX	IpPortMappingEntry
+	MAX-ACCESS	not-accessible
+	STATUS	current
+	DESCRIPTION
+	    ""
+    INDEX { ifIndex }
+   	::= { ipPortMappingTable 1 }
+
+    IpPortMappingEntry ::= SEQUENCE {
+        ipPortSwIface      INTEGER
+    }
+    
+  ipPortSwIface OBJECT-TYPE
+	SYNTAX INTEGER
+	MAX-ACCESS read-create
+	STATUS current
+	DESCRIPTION
+	    "This object shows the SW interfaces to which a particular port is mapped. If we
+	    want to detach the port and delete the mapping we need to set the value 256 which 
+	    is an invalid index for a SW interface."
+    ::= { ipPortMappingEntry 1 }  
+
+
+END
+
+