Initial commitHEADmain

1 files changed, 883 insertions, 0 deletions

diff --git a/MIBS/radlan/RADLAN-TIMESYNCHRONIZATION-MIB b/MIBS/radlan/RADLAN-TIMESYNCHRONIZATION-MIB
new file mode 100644
index 0000000..b4bde08
--- /dev/null
+++ b/MIBS/radlan/RADLAN-TIMESYNCHRONIZATION-MIB
@@ -0,0 +1,883 @@
+RADLAN-TIMESYNCHRONIZATION-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    rnd                                         FROM RADLAN-MIB
+    TruthValue                                  FROM RADLAN-SNMPv2
+    DisplayString                               FROM SNMPv2-TC-v1
+    Unsigned32, Integer32, IpAddress            FROM SNMPv2-SMI
+    MODULE-IDENTITY, OBJECT-TYPE                FROM SNMPv2-SMI
+    TEXTUAL-CONVENTION, RowStatus               FROM SNMPv2-TC;
+
+rlTimeSynchronization MODULE-IDENTITY
+      LAST-UPDATED "200408030024Z"
+      ORGANIZATION "Radlan Computer Communication Ltd."
+      CONTACT-INFO
+              "radlan.com"
+      DESCRIPTION
+              "The MIB module describes the private MIB for SNTP & TIME definitions."
+      REVISION     "200311230024Z"
+      DESCRIPTION
+              "Initial revision"
+      ::= { rnd 92 }
+
+rlTimeSyncMethodMode OBJECT IDENTIFIER ::= { rlTimeSynchronization 1 }
+rlSntpNtpClient  OBJECT IDENTIFIER ::= { rlTimeSynchronization 2 }
+
+rlSntpNtpConfig  OBJECT IDENTIFIER ::= { rlSntpNtpClient 1 }
+rlSntpConfig  OBJECT IDENTIFIER ::= { rlSntpNtpClient 2 }
+rlNtpConfig  OBJECT IDENTIFIER ::= { rlSntpNtpClient 3 }
+
+--
+-- Textual Conventions
+--
+
+NTPTimeStamp ::= TEXTUAL-CONVENTION
+        DISPLAY-HINT "4d.4d"
+        STATUS       current
+        DESCRIPTION  "NTP timestamps are represented as a 64-bit
+                      unsigned fixed-point number, in seconds relative to
+                      00:00 on 1 January 1900.  The integer part is in the
+                      first 32 bits and the fraction part is in the last
+                      32 bits."
+        REFERENCE    "D.L. Mills, 'Network Time Protocol (Version 3)',
+                      RFC-1305, March 1992, Section 3.1"
+        SYNTAX       OCTET STRING (SIZE (8))
+
+NTPSignedTimeValue ::= TEXTUAL-CONVENTION
+        DISPLAY-HINT "2d.2d"
+        STATUS       current
+        DESCRIPTION  "The time in seconds that could represent signed
+                      quantities like time delay with respect to some
+                      source.  This textual-convention is specific to RADLAN
+                      implementation of NTP where 32-bit integers are used
+                      for such quantities.  The signed integer part is in
+                      the first 16 bits and the fraction part is in the
+                      last 16 bits."
+        SYNTAX       OCTET STRING (SIZE (4))
+
+NTPStratum ::= TEXTUAL-CONVENTION
+        STATUS       current
+        DESCRIPTION  "Indicates the stratum of the clock.  The stratum
+                      defines the accuracy of a time server.  Higher the
+                      stratum, lower the accuracy.
+                      0, unspecified
+                      1, primary reference (e.g., calibrated atomic clock,
+                         radio clock)
+                      2-255, secondary reference (via NTP)"
+        REFERENCE    "D.L. Mills, 'Network Time Protocol (Version 3)',
+                      RFC-1305, March 1992, Section 2.2"
+        SYNTAX       Integer32 (0..255)
+
+-- ----------------------------------------------------------------------
+-- Global TimeSyncMethod
+-- ----------------------------------------------------------------------
+
+rlTimeSyncMibVersion OBJECT-TYPE
+        SYNTAX      INTEGER
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION "TimeSync Mib Version."
+        ::= { rlTimeSyncMethodMode 1 }
+
+rndTimeSyncManagedTime  OBJECT-TYPE
+        SYNTAX      DisplayString (SIZE(6))
+        MAX-ACCESS  read-write
+        STATUS      current
+        DESCRIPTION "The time will be sent in the format hhmmss"
+        ::= { rlTimeSyncMethodMode 2 }
+
+rndTimeSyncManagedDate  OBJECT-TYPE
+        SYNTAX      DisplayString (SIZE(6))
+        MAX-ACCESS  read-write
+        STATUS      current
+        DESCRIPTION "The date will be sent in the format ddmmyy"
+         ::= { rlTimeSyncMethodMode 3 }
+
+rndTimeSyncManagedDateTime  OBJECT-TYPE
+        SYNTAX      DisplayString (SIZE(12))
+        MAX-ACCESS  read-write
+        STATUS      current
+        DESCRIPTION "The date and time will be sent in the format ddmmyyhhmmss"
+        ::= { rlTimeSyncMethodMode 4 }
+
+rlTimeSyncMethod OBJECT-TYPE
+        SYNTAX      INTEGER {
+                       none(1),
+                       sntp(2),
+                       ntp(3)
+                    }
+        MAX-ACCESS  read-write
+        STATUS      current
+        DESCRIPTION "Method to be used for time synchronization in the device."
+        DEFVAL      { none }
+        ::= { rlTimeSyncMethodMode 5 }
+
+rlTimeZone OBJECT-TYPE
+        SYNTAX      DisplayString (SIZE(1..6))
+        MAX-ACCESS  read-write
+        STATUS      current
+        DESCRIPTION "Offset from Greenwich time (format [+/-]hh:mm)."
+        ::=  {rlTimeSyncMethodMode 6 }
+
+rlTimeZoneCode OBJECT-TYPE
+        SYNTAX      DisplayString (SIZE(0..4))
+        MAX-ACCESS  read-write
+        STATUS      current
+        DESCRIPTION "Code definition for current TimeZone."
+        ::=  {rlTimeSyncMethodMode 7 }
+
+rlDaylightSavingTimeMode OBJECT-TYPE
+        SYNTAX      INTEGER {
+                       recurring(1),
+                       date(2),
+                       none(3)
+                    }
+        MAX-ACCESS  read-write
+        STATUS      current
+        DESCRIPTION "Daylight Saving Time - Recurring/Date/None."
+        DEFVAL      { none }
+        ::= { rlTimeSyncMethodMode 8 }
+
+rlDaylightSavingTimeStart OBJECT-TYPE
+        SYNTAX      OCTET STRING (SIZE(14))
+        MAX-ACCESS  read-write
+        STATUS      current
+        DESCRIPTION "Daylight Saving Time start date.
+                     In recurring mode: week wday month hh:mm
+                     In date mode:      month day year hh:mm
+                     week:  0-6  (0=First, 6=Last)
+                     wday:  1-7  (Sunday-Saturday)
+                     month: 1-12 (January-December)
+                     day:   1-31
+                     year:  0-99 (2000-2099)
+                     hh:    0-23 (hours)
+                     mm:    0-59 (minutes)"
+        ::= { rlTimeSyncMethodMode 9 }
+
+rlDaylightSavingTimeEnd OBJECT-TYPE
+        SYNTAX      OCTET STRING (SIZE(14))
+        MAX-ACCESS  read-write
+        STATUS      current
+        DESCRIPTION "Daylight Saving Time end date.
+                     In recurring mode: week wday month hh:mm
+                     In date mode:      month day year hh:mm
+                     week:  0-6  (0=First, 6=Last)
+                     wday:  1-7  (Sunday-Saturday)
+                     month: 1-12 (January-December)
+                     day:   1-31
+                     year:  0-99 (2000-2099)
+                     hh:    0-23 (hours)
+                     mm:    0-59 (minutes)"
+        ::= { rlTimeSyncMethodMode 10 }
+
+rlDaylightSavingTimeOffset OBJECT-TYPE
+        SYNTAX      Integer32
+        MAX-ACCESS  read-write
+        STATUS      current
+        DESCRIPTION "Daylight Saving Time - The number of minutes to add to
+                     the clock during summer time."
+        DEFVAL      { 60 }
+        ::= { rlTimeSyncMethodMode 11 }
+
+rlDaylightSavingTimeCode OBJECT-TYPE
+        SYNTAX      DisplayString (SIZE(0..4))
+        MAX-ACCESS  read-write
+        STATUS      current
+        DESCRIPTION "Code definition for current Daylight Saving Time."
+        ::=  {rlTimeSyncMethodMode 12 }
+
+rlTZDSTOffset OBJECT-TYPE
+        SYNTAX      INTEGER
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION "Local Time Zone and Daylight Saving Time offset
+                     in seconds."
+        ::= { rlTimeSyncMethodMode 13 }
+
+-- ----------------------------------------------------------------------
+-- SNTP/NTP client configuration parameters
+-- ----------------------------------------------------------------------
+
+rlSntpNtpMibVersion OBJECT-TYPE
+        SYNTAX      INTEGER
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION "SntpNtp Mib Version."
+        ::= { rlSntpNtpConfig 1 }
+
+rlSntpNtpConfigMode OBJECT-TYPE
+        SYNTAX      INTEGER {
+                       none(1),
+                       unicast(2),
+                       anycast(3),
+                       multicast(4),
+                       unicastAnycast(5),
+                       unicastMulticast(6),
+                       anycastMulticast(7),
+                       unicastAnycastMulticast(8)
+                    }
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION "Current configuration operational mode of SNTP/NTP client."
+        DEFVAL      { none }
+        ::= { rlSntpNtpConfig 2 }
+
+rlSntpNtpConfigSysStratum OBJECT-TYPE
+        SYNTAX      NTPStratum
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION "The stratum of the local clock. If the value is set
+                     to 1, i.e., this is a primary reference, then the
+                     Primary-Clock procedure described in Section 3.4.6,
+                     in RFC-1305 is invoked."
+        ::= { rlSntpNtpConfig 3 }
+
+rlSntpNtpConfigPollInterval OBJECT-TYPE
+        SYNTAX      INTEGER
+        MAX-ACCESS  read-write
+        STATUS      current
+        DESCRIPTION "Period of time (in seconds) between succesive attempts to
+                     perform an update via SNTP."
+        DEFVAL      { 1024 }
+        ::= { rlSntpNtpConfig 4 }
+
+rlSntpNtpConfigPrimaryPollSrvAddr OBJECT-TYPE
+        SYNTAX      IpAddress
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION "Ip Address of a trusted SNTP server for polling."
+        ::= { rlSntpNtpConfig 5 }
+
+rlSntpNtpConfigPrimaryPollSrvMrid OBJECT-TYPE
+        SYNTAX      INTEGER
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION "The mrid of the primary server."
+        ::= { rlSntpNtpConfig 6 }
+
+rlSntpNtpConfigPrimaryPollSrvIfIndex OBJECT-TYPE
+        SYNTAX      INTEGER
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION "The interface addressed of the primary server."
+        ::= { rlSntpNtpConfig 7 }
+
+rlSntpNtpConfigPrimaryPollSrvStratum OBJECT-TYPE
+        SYNTAX      NTPStratum
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION "The stratum of the primary polling server."
+        ::= { rlSntpNtpConfig 8 }
+
+rlSntpNtpConfigSyncSrvAddr OBJECT-TYPE
+        SYNTAX      IpAddress
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION "Ip Address of the synced server."
+        ::= { rlSntpNtpConfig 9 }
+
+rlSntpNtpConfigSyncSrvMrid OBJECT-TYPE
+        SYNTAX      INTEGER
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION "The mrid of the synced server."
+        ::= { rlSntpNtpConfig 10 }
+
+rlSntpNtpConfigSyncSrvIfIndex OBJECT-TYPE
+        SYNTAX      INTEGER
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION "The interface addressed of the synced server."
+        ::= { rlSntpNtpConfig 11 }
+
+rlSntpNtpConfigSyncSrvType OBJECT-TYPE
+        SYNTAX      INTEGER {
+                       none(1),
+                       unicast(2),
+                       anycast(3),
+                       broadcast(4)
+                    }
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION "Synced server type."
+        DEFVAL      { none }
+        ::= { rlSntpNtpConfig 12 }
+
+
+rlSntpNtpConfigSyncSrvStratum OBJECT-TYPE
+        SYNTAX      NTPStratum
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION "The stratum of the synced server."
+        ::= { rlSntpNtpConfig 13 }
+
+rlSntpNtpConfigRetryTimeout OBJECT-TYPE
+        SYNTAX      Integer32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION "SNTP/NTP requests Retry Interval."
+        ::= { rlSntpNtpConfig 14 }
+
+rlSntpNtpConfigRetryCnt OBJECT-TYPE
+        SYNTAX      Integer32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION "SNTP/NTP requests Retry Count."
+        ::= { rlSntpNtpConfig 15 }
+
+-- ----------------------------------------------------------------------
+-- SNTP client configuration parameters
+-- ----------------------------------------------------------------------
+
+rlSntpClientMode OBJECT-TYPE
+        SYNTAX      INTEGER {
+                       none(1),
+                       active(2),
+                       passive(3)
+                    }
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION "Current operational mode of SNTP client."
+        DEFVAL      { none }
+        ::= { rlSntpConfig 1 }
+
+rlSntpUnicastAdminState OBJECT-TYPE
+        SYNTAX      INTEGER {
+                       enabled(1),
+                       disabled(2)
+                    }
+        MAX-ACCESS  read-write
+        STATUS      current
+        DESCRIPTION "SNTP Unicast Administrative state - Enable/Disable SNTP.
+                     In case of reinitializing polling or time
+                     synchronization this MIB is modified. The MIB can
+                     be enabled even thought it is already enabled."
+        DEFVAL      { disabled }
+        ::= { rlSntpConfig 2 }
+
+rlSntpBroadcastAdminState OBJECT-TYPE
+        SYNTAX      INTEGER {
+                       enabled(1),
+                       disabled(2)
+                    }
+        MAX-ACCESS  read-write
+        STATUS      current
+        DESCRIPTION "SNTP Broadcast Administrative state - Enable/Disable SNTP.
+                     In case of reinitializing polling or time
+                     synchronization this MIB is modified. The MIB can
+                     be enabled even thought it is already enabled."
+        DEFVAL      { disabled }
+        ::= { rlSntpConfig 3 }
+
+rlSntpAnycastAdminState OBJECT-TYPE
+        SYNTAX      INTEGER {
+                       enabled(1),
+                       disabled(2)
+                    }
+        MAX-ACCESS  read-write
+        STATUS      current
+        DESCRIPTION "SNTP Anycast Administrative state - Enable/Disable SNTP.
+                     In case of reinitializing polling or time
+                     synchronization this MIB is modified. The MIB can
+                     be enabled even thought it is already enabled."
+        DEFVAL      { disabled }
+        ::= { rlSntpConfig 4 }
+
+rlSntpUnicastPollState OBJECT-TYPE
+        SYNTAX      TruthValue
+        MAX-ACCESS  read-write
+        STATUS      current
+        DESCRIPTION "SNTP Unicast poll state - TRUE for polled."
+        DEFVAL      { false }
+        ::= { rlSntpConfig 5 }
+
+rlSntpBroadcastPollState OBJECT-TYPE
+        SYNTAX      TruthValue
+        MAX-ACCESS  read-write
+        STATUS      current
+        DESCRIPTION "SNTP Broadcast poll state - TRUE for polled."
+        DEFVAL      { false }
+        ::= { rlSntpConfig 6 }
+
+rlSntpAnycastPollState OBJECT-TYPE
+        SYNTAX      TruthValue
+        MAX-ACCESS  read-write
+        STATUS      current
+        DESCRIPTION "SNTP Anycast poll state - TRUE for polled."
+        DEFVAL      { false }
+        ::= { rlSntpConfig 7 }
+
+rlSntpAuthenticationState OBJECT-TYPE
+        SYNTAX      INTEGER {
+                       enabled(1),
+                       disabled(2)
+                    }
+        MAX-ACCESS  read-write
+        STATUS      current
+        DESCRIPTION "SNTP authentication state- Enable/Disable SNTP."
+        DEFVAL      { disabled }
+        ::= { rlSntpConfig 8 }
+
+rlTimeValidFlag OBJECT-TYPE
+        SYNTAX      TruthValue
+        MAX-ACCESS  read-write
+        STATUS      current
+        DESCRIPTION "Is time valid."
+        DEFVAL      { false }
+        ::= { rlSntpConfig 9 }
+
+-- ----------------------------------------------------------------------
+-- Table for configuring Interfaces (Broadcast)
+-- ----------------------------------------------------------------------
+
+rlSntpConfigBroadcastTable OBJECT-TYPE
+        SYNTAX      SEQUENCE OF RlSntpBroadcastEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION "A table containing broadcast mode information per
+                     interface."
+        ::= { rlSntpConfig 10 }
+
+rlSntpBroadcastEntry OBJECT-TYPE
+        SYNTAX      RlSntpBroadcastEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION "Private paramters for interface:
+                     sntp status, broadcast mode."
+        INDEX       { rlSntpBroadcastIfIndex }
+        ::= { rlSntpConfigBroadcastTable 1 }
+
+RlSntpBroadcastEntry ::=
+        SEQUENCE {
+           rlSntpBroadcastIfIndex        INTEGER,
+           rlSntpBroadcastIfAdminState   INTEGER,
+           rlSntpBroadcastMode           INTEGER,
+           rlSntpBroadcastPolled         TruthValue,
+           rlSntpBroadcastAddress        IpAddress,
+           rlSntpBroadcastStratum        NTPStratum,
+           rlSntpBroadcastLastResp       NTPTimeStamp,
+           rlSntpBroadcastStatus         INTEGER,
+           rlSntpBroadcastOffset         NTPTimeStamp,
+           rlSntpBroadcastDelay          NTPSignedTimeValue,
+           rlSntpBroadcastRowStatus      RowStatus
+        }
+
+rlSntpBroadcastIfIndex OBJECT-TYPE
+        SYNTAX      INTEGER
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION "The interface addressed by this entry."
+        ::=  {rlSntpBroadcastEntry 1}
+
+rlSntpBroadcastIfAdminState OBJECT-TYPE
+        SYNTAX      INTEGER {
+                       enabled(1),
+                       disabled(2)
+                    }
+        MAX-ACCESS  read-write
+        STATUS      current
+        DESCRIPTION "SNTP interface Adminstrative state- Enable/Disable SNTP.
+                     In case of reinitializing polling or time
+                     synchronization this MIB is modified. The MIB can
+                     be enabled even thought it is already enabled."
+        DEFVAL      { disabled }
+        ::= { rlSntpBroadcastEntry 2 }
+
+rlSntpBroadcastMode OBJECT-TYPE
+        SYNTAX      INTEGER {
+                       none(1),
+                       receive(2),
+                       send(3),
+                       receiveSend(4)
+                    }
+        MAX-ACCESS  read-write
+        STATUS      current
+        DESCRIPTION "SNTP/NTP Broadcast Mode.
+                     none        - no broadcast SNTP packets are received or sent.
+                     Receive     - host only receive SNTP packets that were sent
+                                   to broadcast address (were not directed to
+                                   the host). This is multicast mode in the RFC.
+                     Send        - host only send SNTP packets and wait for replies
+                                   directed to the host. This is anycast mode in
+                                   the RFC.
+                     ReceiveSend - host receive broadcast messages (destination
+                                   is broadcast address in the received messages)
+                                   and send SNTP packets to wait for replies
+                                   directed to the host (destination address
+                                   of the reply is the host address). This mode
+                                   combines anycast and multicast modes in the
+                                   RFC."
+        DEFVAL      { receiveSend }
+        ::= { rlSntpBroadcastEntry 3 }
+
+rlSntpBroadcastPolled OBJECT-TYPE
+        SYNTAX      TruthValue
+        MAX-ACCESS  read-write
+        STATUS      current
+        DESCRIPTION "TRUE if participating in polling cycle, else FALSE."
+        DEFVAL { false }
+        ::= {  rlSntpBroadcastEntry 4 }
+
+rlSntpBroadcastAddress OBJECT-TYPE
+        SYNTAX      IpAddress
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION "Ip Address of a trusted SNTP server."
+        ::= { rlSntpBroadcastEntry 5 }
+
+rlSntpBroadcastStratum OBJECT-TYPE
+        SYNTAX      NTPStratum
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION "The stratum of this server."
+        ::= { rlSntpBroadcastEntry 6 }
+
+rlSntpBroadcastLastResp OBJECT-TYPE
+        SYNTAX      NTPTimeStamp
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION "SNTP Broadcast Last Response Time"
+        ::= { rlSntpBroadcastEntry 7 }
+
+rlSntpBroadcastStatus OBJECT-TYPE
+        SYNTAX      INTEGER {
+                       unknown(1),
+                       inProcess(2),
+                       up(3),
+                       down(4)
+                    }
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION "The Operational State of the remote IP Address of
+                     the SNTP Broadcast.
+                     unknown     - requests were not sent yet.
+                     inProcess   - replies were not received yet.
+                     up          - server sent SNTP packets.
+                     down        - server stopped sending SNTP packets."
+        DEFVAL      { unknown }
+        ::= { rlSntpBroadcastEntry 8 }
+
+rlSntpBroadcastOffset OBJECT-TYPE
+        SYNTAX      NTPTimeStamp
+        UNITS       "seconds"
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "The estimated offset of the server's clock relative to
+                 the local clock, in seconds.  The host determines the
+                 value of this object using the algorithm described in
+                 RFC 2030."
+        ::= { rlSntpBroadcastEntry 9 }
+
+rlSntpBroadcastDelay OBJECT-TYPE
+        SYNTAX      NTPSignedTimeValue
+        UNITS       "seconds"
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "The estimated round-trip delay of the server's clock
+                 relative to the local clock over the network path
+                 between them, in seconds. The host determines the
+                 value of this object using the algorithm described in
+                 RFC 2030."
+        ::= { rlSntpBroadcastEntry 10 }
+
+rlSntpBroadcastRowStatus OBJECT-TYPE
+        SYNTAX      RowStatus
+        MAX-ACCESS  read-write
+        STATUS      current
+        DESCRIPTION "The Status of this SNTP broadcast interface
+                     information."
+        ::= { rlSntpBroadcastEntry 11 }
+
+
+rlSntpConfigAnycastTable OBJECT-TYPE
+        SYNTAX      SEQUENCE OF RlSntpAnycastEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION "A table containing anycast information per
+                     interface."
+        ::= { rlSntpConfig 11 }
+
+rlSntpAnycastEntry OBJECT-TYPE
+        SYNTAX      RlSntpAnycastEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION "Private paramters for interface:
+                     server info."
+        INDEX       { rlSntpAnycastIfIndex }
+        ::= { rlSntpConfigAnycastTable 1 }
+
+RlSntpAnycastEntry ::=
+        SEQUENCE {
+           rlSntpAnycastIfIndex          INTEGER,
+           rlSntpAnycastAddress          IpAddress,
+           rlSntpAnycastStratum          NTPStratum,
+           rlSntpAnycastLastResp         NTPTimeStamp,
+           rlSntpAnycastStatus           INTEGER,
+           rlSntpAnycastOffset           NTPTimeStamp,
+           rlSntpAnycastDelay            NTPSignedTimeValue,
+           rlSntpAnycastRowStatus        RowStatus
+        }
+
+rlSntpAnycastIfIndex OBJECT-TYPE
+        SYNTAX      INTEGER
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION "The interface addressed by this entry."
+        ::=  {rlSntpAnycastEntry 1}
+
+rlSntpAnycastAddress OBJECT-TYPE
+        SYNTAX      IpAddress
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION "Ip Address of a trusted SNTP server."
+        ::= { rlSntpAnycastEntry 2 }
+
+rlSntpAnycastStratum OBJECT-TYPE
+        SYNTAX      NTPStratum
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION "The stratum of this server."
+        ::= { rlSntpAnycastEntry 3 }
+
+rlSntpAnycastLastResp OBJECT-TYPE
+        SYNTAX      NTPTimeStamp
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION "SNTP Anycast Last Response Time"
+        ::= { rlSntpAnycastEntry 4 }
+
+rlSntpAnycastStatus OBJECT-TYPE
+        SYNTAX      INTEGER {
+                       unknown(1),
+                       inProcess(2),
+                       up(3),
+                       down(4)
+                    }
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION "The Operational State of the remote IP Address of
+                     the SNTP Anycast.
+                     unknown     - requests were not sent yet.
+                     inProcess   - replies were not received yet.
+                     up          - server sent SNTP packets.
+                     down        - server stopped sending SNTP packets."
+        DEFVAL      { unknown }
+        ::= { rlSntpAnycastEntry 5 }
+
+rlSntpAnycastOffset OBJECT-TYPE
+        SYNTAX      NTPTimeStamp
+        UNITS       "seconds"
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "The estimated offset of the server's clock relative to
+                 the local clock, in seconds.  The host determines the
+                 value of this object using the algorithm described in
+                 RFC 2030."
+        ::= { rlSntpAnycastEntry 6 }
+
+rlSntpAnycastDelay OBJECT-TYPE
+        SYNTAX      NTPSignedTimeValue
+        UNITS       "seconds"
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "The estimated round-trip delay of the server's clock
+                 relative to the local clock over the network path
+                 between them, in seconds. The host determines the
+                 value of this object using the algorithm described in
+                 RFC 2030."
+        ::= { rlSntpAnycastEntry 7 }
+
+rlSntpAnycastRowStatus OBJECT-TYPE
+        SYNTAX      RowStatus
+        MAX-ACCESS  read-write
+        STATUS      current
+        DESCRIPTION "The Status of this SNTP anycast interface
+                     information."
+        ::= { rlSntpAnycastEntry 8 }
+
+-- ----------------------------------------------------------------------
+-- Table for configuring Servers (Unicast)
+-- ----------------------------------------------------------------------
+
+rlSntpConfigServerTable OBJECT-TYPE
+        SYNTAX      SEQUENCE OF RlSntpServerEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION "A table containing trusted SNTP servers to be queried in
+                     unicast or broadcast mode."
+        ::= { rlSntpConfig 12 }
+
+rlSntpServerEntry OBJECT-TYPE
+        SYNTAX      RlSntpServerEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION "A trusted server."
+        INDEX       { rlSntpServerAddress }
+        ::= { rlSntpConfigServerTable 1 }
+
+RlSntpServerEntry ::=
+        SEQUENCE {
+           rlSntpServerAddress           IpAddress,
+           rlSntpServerPolled            TruthValue,
+           rlSntpServerStratum           NTPStratum,
+           rlSntpServerLastResp          NTPTimeStamp,
+           rlSntpServerStatus            INTEGER,
+           rlSntpServersOffset           NTPTimeStamp,
+           rlSntpServersDelay            NTPSignedTimeValue,
+           rlSntpServersKeyIdentifier    Unsigned32,
+           rlSntpServerRowStatus         RowStatus
+        }
+
+rlSntpServerAddress OBJECT-TYPE
+        SYNTAX      IpAddress
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION "Ip Address of a trusted SNTP server."
+        ::= { rlSntpServerEntry 1 }
+
+rlSntpServerPolled OBJECT-TYPE
+        SYNTAX      TruthValue
+        MAX-ACCESS  read-write
+        STATUS      current
+        DESCRIPTION "TRUE if participating in polling cycle, else FALSE."
+        DEFVAL { false }
+        ::= {  rlSntpServerEntry 2 }
+
+rlSntpServerStratum OBJECT-TYPE
+        SYNTAX      NTPStratum
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION "The stratum of this server."
+        ::= { rlSntpServerEntry 3 }
+
+rlSntpServerLastResp OBJECT-TYPE
+        SYNTAX      NTPTimeStamp
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION "SNTP Server Last Response Time"
+        ::= { rlSntpServerEntry 4 }
+
+rlSntpServerStatus OBJECT-TYPE
+        SYNTAX      INTEGER {
+                       unknown(1),
+                       inProcess(2),
+                       up(3),
+                       down(4)
+                    }
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION "The Operational State of the remote IP Address of
+                     the SNTP Server.
+                     unknown     - requests were not sent yet.
+                     inProcess   - replies were not received yet.
+                     up          - server sent SNTP packets.
+                     down        - server stopped sending SNTP packets."
+        DEFVAL      { unknown }
+        ::= { rlSntpServerEntry 5 }
+
+rlSntpServersOffset OBJECT-TYPE
+        SYNTAX      NTPTimeStamp
+        UNITS       "seconds"
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "The estimated offset of the server's clock relative to
+                 the local clock, in seconds.  The host determines the
+                 value of this object using the algorithm described in
+                 RFC 2030."
+        ::= { rlSntpServerEntry 6 }
+
+rlSntpServersDelay OBJECT-TYPE
+        SYNTAX      NTPSignedTimeValue
+        UNITS       "seconds"
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "The estimated round-trip delay of the server's clock
+                 relative to the local clock over the network path
+                 between them, in seconds. The host determines the
+                 value of this object using the algorithm described in
+                 RFC 2030."
+        ::= { rlSntpServerEntry 7 }
+
+rlSntpServersKeyIdentifier OBJECT-TYPE
+        SYNTAX      Unsigned32
+        MAX-ACCESS  read-write
+        STATUS      current
+        DESCRIPTION "Authentication key identifier. The valid range is
+                     1-4294967295.
+                     Value zero, means no authentication is being done."
+        ::= { rlSntpServerEntry 8 }
+
+rlSntpServerRowStatus OBJECT-TYPE
+        SYNTAX      RowStatus
+        MAX-ACCESS  read-write
+        STATUS      current
+        DESCRIPTION "The Status of this SNTP server information."
+        ::= { rlSntpServerEntry 9 }
+
+-- ----------------------------------------------------------------------
+-- Table for configuring authentication keys
+-- ----------------------------------------------------------------------
+
+rlSntpConfigAuthenticationTable OBJECT-TYPE
+        SYNTAX      SEQUENCE OF RlSntpAuthenticationEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION "A table authentication keys."
+        ::= { rlSntpConfig 13 }
+
+rlSntpAuthenticationEntry OBJECT-TYPE
+        SYNTAX      RlSntpAuthenticationEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION "Keys information for authenticationof NTP packets."
+        INDEX       { rlSntpAuthenticationKeyID }
+        ::= { rlSntpConfigAuthenticationTable 1 }
+
+RlSntpAuthenticationEntry ::=
+        SEQUENCE {
+           rlSntpAuthenticationKeyID        Unsigned32 (1..4294967295),
+           rlSntpAuthenticationKeyValue     DisplayString,
+           rlSntpAuthenticationKeyState     INTEGER,
+           rlSntpAuthenticationRowStatus    RowStatus
+        }
+
+rlSntpAuthenticationKeyID OBJECT-TYPE
+        SYNTAX      Unsigned32 (1..4294967295)
+        MAX-ACCESS  read-write
+        STATUS      current
+        DESCRIPTION "The key identifier. Valid rabge for key identifier
+                     is 1-4294967295."
+        ::=  {rlSntpAuthenticationEntry 1}
+
+rlSntpAuthenticationKeyValue OBJECT-TYPE
+        SYNTAX      DisplayString (SIZE(1..8))
+        MAX-ACCESS  read-write
+        STATUS      current
+        DESCRIPTION "Key value."
+        ::= { rlSntpAuthenticationEntry 2 }
+
+rlSntpAuthenticationKeyState OBJECT-TYPE
+        SYNTAX      INTEGER {
+                       enabled(1),
+                       disabled(2)
+                    }
+        MAX-ACCESS  read-write
+        STATUS      current
+        DESCRIPTION "Authentication key state - Enable/Disable key."
+        DEFVAL      { disabled }
+        ::= { rlSntpAuthenticationEntry 3 }
+
+rlSntpAuthenticationRowStatus OBJECT-TYPE
+        SYNTAX      RowStatus
+        MAX-ACCESS  read-write
+        STATUS      current
+        DESCRIPTION "The Status of this Authentication key information."
+        ::= { rlSntpAuthenticationEntry 4 }
+
+END