Initial commitHEADmain

1 files changed, 1302 insertions, 0 deletions

diff --git a/MIBS/quanta/dot3ad.my b/MIBS/quanta/dot3ad.my
new file mode 100644
index 0000000..96f419c
--- /dev/null
+++ b/MIBS/quanta/dot3ad.my
@@ -0,0 +1,1302 @@
+LAG-MIB DEFINITIONS ::= BEGIN
+
+-- -------------------------------------------------------------
+-- IEEE 802.3ad MIB
+-- -------------------------------------------------------------
+
+IMPORTS
+  MODULE-IDENTITY, OBJECT-TYPE, Counter32, TimeTicks, BITS
+    FROM SNMPv2-SMI
+  DisplayString, MacAddress, TEXTUAL-CONVENTION, TruthValue
+    FROM SNMPv2-TC
+  MODULE-COMPLIANCE, OBJECT-GROUP
+    FROM SNMPv2-CONF
+  InterfaceIndex
+    FROM IF-MIB
+  ;
+
+
+lagMIB MODULE-IDENTITY
+  LAST-UPDATED "9911220000Z"
+  ORGANIZATION "Netgear Inc"
+  CONTACT-INFO ""
+  DESCRIPTION
+   "The Link Aggregation module for managing IEEE 802.3ad."
+   ::= { iso(1) member-body(2) us(840) dot3(10006) snmpmibs(300) linkagg(43) }
+
+
+lagMIBObjects OBJECT IDENTIFIER ::= { lagMIB 1 }
+
+
+-- -------------------------------------------------------------
+-- Textual Conventions
+-- -------------------------------------------------------------
+
+  LacpKey ::= TEXTUAL-CONVENTION
+    STATUS current
+    DESCRIPTION
+     "The Actor or Partner Key value."
+    SYNTAX INTEGER (0..65535)
+
+  LacpState ::= TEXTUAL-CONVENTION
+  STATUS current
+  DESCRIPTION
+   "The Actor and Partner State values from the LACPDU."
+  SYNTAX BITS {
+       lacpActivity(0),
+       lacpTimeout(1),
+       aggregation(2),
+       synchronization(3),
+       collecting(4),
+       distributing(5),
+       defaulted(6),
+       expired(7)
+  }
+
+  ChurnState ::= TEXTUAL-CONVENTION
+  STATUS current
+  DESCRIPTION
+   "The state of the Churn Detection machine."
+  SYNTAX INTEGER {
+       noChurn(1),
+       churn(2),
+       churnMonitor(3)
+  }
+
+PortList ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION
+        "Each octet within this value specifies a set of eight
+        ports, with the first octet specifying ports 1 through
+        8, the second octet specifying ports 9 through 16, etc.
+        Within each octet, the most significant bit represents
+        the lowest numbered port, and the least significant bit
+        represents the highest numbered port.  Thus, each port
+        of the bridge is represented by a single bit within the
+        value of this object.  If that bit has a value of '1'
+        then that port is included in the set of ports; the port
+        is not included if its bit has a value of '0'."
+    SYNTAX      OCTET STRING (SIZE(0..255))
+
+
+-- -------------------------------------------------------------
+
+-- -------------------------------------------------------------
+-- groups in the LAG MIB
+-- -------------------------------------------------------------
+
+dot3adAgg OBJECT IDENTIFIER ::= { lagMIBObjects 1 }
+dot3adAggPort OBJECT IDENTIFIER ::= { lagMIBObjects 2 }
+
+
+-- -------------------------------------------------------------
+
+-- -------------------------------------------------------------
+-- The Tables Last Changed Object
+-- -------------------------------------------------------------
+
+dot3adTablesLastChanged OBJECT-TYPE
+  SYNTAX TimeTicks
+  MAX-ACCESS read-only
+  STATUS current
+  DESCRIPTION
+   "This object indicates the time of the
+    most recent change to the dot3adAggTable,
+    dot3adAggPortListTable, or
+    dot3adAggPortTable."
+::= { lagMIBObjects 3 }
+
+
+-- -------------------------------------------------------------
+-- The Aggregator Configuration Table
+-- -------------------------------------------------------------
+
+dot3adAggTable OBJECT-TYPE
+  SYNTAX SEQUENCE OF Dot3adAggEntry
+  MAX-ACCESS not-accessible
+  STATUS current
+  DESCRIPTION
+   "A table that contains information about every
+    Aggregator that is associated with this System."
+  REFERENCE
+   "IEEE 802.3 Subclause 30.7.1"
+::= { dot3adAgg 1 }
+
+dot3adAggEntry OBJECT-TYPE
+  SYNTAX Dot3adAggEntry
+  MAX-ACCESS not-accessible
+  STATUS current
+  DESCRIPTION
+   "A list of the Aggregator parameters.  This is indexed
+    by the ifIndex of the Aggregator."
+  INDEX { dot3adAggIndex }
+::= { dot3adAggTable 1 }
+
+Dot3adAggEntry ::=
+  SEQUENCE {
+    dot3adAggIndex
+      InterfaceIndex,
+    dot3adAggMACAddress
+      MacAddress,
+    dot3adAggActorSystemPriority
+      INTEGER,
+    dot3adAggActorSystemID
+      MacAddress,
+    dot3adAggAggregateOrIndividual
+      TruthValue,
+    dot3adAggActorAdminKey
+      LacpKey,
+    dot3adAggActorOperKey
+      LacpKey,
+    dot3adAggPartnerSystemID
+      MacAddress,
+    dot3adAggPartnerSystemPriority
+      INTEGER,
+    dot3adAggPartnerOperKey
+      LacpKey,
+    dot3adAggCollectorMaxDelay
+      INTEGER
+  }
+
+dot3adAggIndex OBJECT-TYPE
+  SYNTAX InterfaceIndex
+  MAX-ACCESS not-accessible
+  STATUS current
+  DESCRIPTION
+   "The unique identifier allocated to this Aggregator by the local System.
+    This attribute identifies an Aggregator instance among the subordinate
+    managed objects of the containing object.  This value is read-only."
+  REFERENCE
+   "IEEE 802.3 Subclause 30.7.1.1.1"
+::= { dot3adAggEntry 1 }
+
+dot3adAggMACAddress OBJECT-TYPE
+  SYNTAX MacAddress
+  MAX-ACCESS read-only
+  STATUS current
+  DESCRIPTION
+   "A 6-octet read-only value carrying the individual
+    MAC address assigned to the Aggregator."
+  REFERENCE
+   "IEEE 802.3 Subclause 30.7.1.1.9"
+::= { dot3adAggEntry 2 }
+
+dot3adAggActorSystemPriority OBJECT-TYPE
+  SYNTAX INTEGER (0..65535)
+  MAX-ACCESS read-write
+  STATUS current
+  DESCRIPTION
+   "A 2-octet read-write value indicating the priority value
+    associated with the Actor's System ID."
+  REFERENCE
+   "IEEE 802.3 Subclause 30.7.1.1.5"
+::= { dot3adAggEntry 3 }
+
+dot3adAggActorSystemID OBJECT-TYPE
+  SYNTAX MacAddress
+  MAX-ACCESS read-only
+  STATUS current
+  DESCRIPTION
+   "A 6-octet read-write MAC address value used as a unique
+    identifier for the System that contains this Aggregator.
+    NOTE -- From the perspective of the Link Aggregation mechanisms described
+    in Clause 43, only a single combination of Actor's System ID and System
+    Priority are considered, and no distinction is made between the values of
+    these parameters for an Aggregator and the port(s) that are associated
+    with it; i.e., the protocol is described in terms of the operation of
+    aggregation within a single System.  However, the managed objects provided
+    for the Aggregator and the port both allow management of these parameters.
+    The result of this is to permit a single piece of equipment to be
+    configured by management to contain more than one System from the point of
+    view of the operation of Link Aggregation.  This may be of particular use
+    in the configuration of equipment that has limited aggregation capability
+    (see 43.6)."
+  REFERENCE
+   "IEEE 802.3 Subclause 30.7.1.1.4"
+::= { dot3adAggEntry 4 }
+
+dot3adAggAggregateOrIndividual OBJECT-TYPE
+  SYNTAX TruthValue
+  MAX-ACCESS read-only
+  STATUS current
+  DESCRIPTION
+   "A read-only Boolean value indicating whether the
+    Aggregator represents an Aggregate ('TRUE ') or
+    an Individual link ('FALSE ')."
+  REFERENCE
+  "IEEE 802.3 Subclause 30.7.1.1.6"
+::= { dot3adAggEntry 5 }
+
+dot3adAggActorAdminKey OBJECT-TYPE
+  SYNTAX LacpKey
+  MAX-ACCESS read-write
+  STATUS current
+  DESCRIPTION
+   "The current administrative value of the Key for the Aggregator.
+    The administrative Key value may differ from the operational
+    Key value for the reasons discussed in 43.6.2.  This is a 16-bit,
+    read-write value.  The meaning of particular Key values
+    is of local significance."
+  REFERENCE
+   "IEEE 802.3 Subclause 30.7.1.1.7"
+::= { dot3adAggEntry 6 }
+
+dot3adAggActorOperKey OBJECT-TYPE
+  SYNTAX LacpKey
+  MAX-ACCESS read-only
+  STATUS current
+  DESCRIPTION
+   "The current operational value of the Key for the Aggregator.
+    The administrative Key value may differ from the operational
+    Key value for the reasons discussed in 43.6.2.
+    This is a 16-bit read-only value.  The meaning of particular Key
+    values is of local significance."
+  REFERENCE
+   "IEEE 802.3 Subclause 30.7.1.1.8"
+::= { dot3adAggEntry 7 }
+
+dot3adAggPartnerSystemID OBJECT-TYPE
+  SYNTAX MacAddress
+  MAX-ACCESS read-only
+  STATUS current
+  DESCRIPTION
+   "A 6-octet read-only MAC address value consisting
+    of the unique identifier for the current protocol Partner of
+    this Aggregator.  A value of zero indicates that there is no
+    known Partner.  If the aggregation is manually configured, this
+    System ID value will be a value assigned by the local System."
+  REFERENCE
+   "IEEE 802.3 Subclause 30.7.1.1.10"
+::= { dot3adAggEntry 8 }
+
+dot3adAggPartnerSystemPriority OBJECT-TYPE
+  SYNTAX INTEGER (0..65535)
+  MAX-ACCESS read-only
+  STATUS current
+  DESCRIPTION
+   "A 2-octet read-only value that indicates the priority
+    value associated with the Partner's System ID.  If the
+    aggregation is manually configured, this System Priority value
+    will be a value assigned by the local System."
+  REFERENCE
+   "IEEE 802.3 Subclause 30.7.1.1.11"
+::= { dot3adAggEntry 9 }
+
+dot3adAggPartnerOperKey OBJECT-TYPE
+  SYNTAX LacpKey
+  MAX-ACCESS read-only
+  STATUS current
+  DESCRIPTION
+   "The current operational value of the Key for the
+    Aggregator's current protocol Partner.  This is
+    a 16-bit read-only value.  If the aggregation is manually
+    configured, this Key value will be a value assigned by the
+    local System."
+  REFERENCE
+   "IEEE 802.3 Subclause 30.7.1.1.12"
+::= { dot3adAggEntry 10 }
+
+dot3adAggCollectorMaxDelay OBJECT-TYPE
+  SYNTAX INTEGER (0..65535)
+  MAX-ACCESS read-write
+  STATUS current
+  DESCRIPTION
+   "The value of this 16-bit read-write attribute defines
+    the maximum delay, in tens of microseconds, that
+    may be imposed by the Frame Collector between
+    receiving a frame from an Aggregator Parser, and
+    either delivering the frame to its MAC Client or discarding
+    the frame (see 43.2.3.1.1)."
+  REFERENCE
+   "IEEE 802.3 Subclause 30.7.1.1.32"
+::= { dot3adAggEntry 11 }
+
+
+-- -------------------------------------------------------------
+-- The Aggregation Port List Table
+-- -------------------------------------------------------------
+
+dot3adAggPortListTable OBJECT-TYPE
+  SYNTAX SEQUENCE OF Dot3adAggPortListEntry
+  MAX-ACCESS not-accessible
+  STATUS current
+  DESCRIPTION
+   "A table that contains a list of all the ports
+    associated with each Aggregator."
+  REFERENCE
+   "IEEE 802.3 Subclause 30.7.1.1.30"
+::= { dot3adAgg 2 }
+
+dot3adAggPortListEntry OBJECT-TYPE
+  SYNTAX Dot3adAggPortListEntry
+  MAX-ACCESS not-accessible
+  STATUS current
+  DESCRIPTION
+   "A list of the ports associated with a given Aggregator.
+    This is indexed by the ifIndex of the Aggregator."
+  INDEX { dot3adAggIndex }
+::= { dot3adAggPortListTable 1 }
+
+Dot3adAggPortListEntry ::=
+  SEQUENCE {
+  dot3adAggPortListPorts
+    PortList
+  }
+
+dot3adAggPortListPorts OBJECT-TYPE
+  SYNTAX PortList
+  MAX-ACCESS read-only
+  STATUS current
+  DESCRIPTION
+   "The complete set of ports currently associated with
+    this Aggregator.  Each bit set in this list represents
+    an Actor Port member of this Link Aggregation."
+  REFERENCE
+   "IEEE 802.3 Subclause 30.7.1.1.30"
+::= { dot3adAggPortListEntry 1 }
+
+
+-- -------------------------------------------------------------
+-- The Aggregation Port Table
+-- -------------------------------------------------------------
+
+dot3adAggPortTable OBJECT-TYPE
+  SYNTAX SEQUENCE OF Dot3adAggPortEntry
+  MAX-ACCESS not-accessible
+  STATUS current
+  DESCRIPTION
+   "A table that contains Link Aggregation Control
+    configuration information about every
+    Aggregation Port associated with this device.
+    A row appears in this table for each physical port."
+  REFERENCE
+   "IEEE 802.3 Subclause 30.7.2"
+::= { dot3adAggPort 1 }
+
+dot3adAggPortEntry OBJECT-TYPE
+  SYNTAX Dot3adAggPortEntry
+  MAX-ACCESS not-accessible
+  STATUS current
+  DESCRIPTION
+   "A list of Link Aggregation Control configuration
+    parameters for each Aggregation Port on this device."
+  INDEX { dot3adAggPortIndex }
+::= { dot3adAggPortTable 1 }
+
+Dot3adAggPortEntry ::=
+  SEQUENCE {
+    dot3adAggPortIndex
+      InterfaceIndex,
+    dot3adAggPortActorSystemPriority
+      INTEGER,
+    dot3adAggPortActorSystemID
+      MacAddress,
+    dot3adAggPortActorAdminKey
+      LacpKey,
+    dot3adAggPortActorOperKey
+      LacpKey,
+    dot3adAggPortPartnerAdminSystemPriority
+      INTEGER,
+    dot3adAggPortPartnerOperSystemPriority
+      INTEGER,
+    dot3adAggPortPartnerAdminSystemID
+      MacAddress,
+    dot3adAggPortPartnerOperSystemID
+      MacAddress,
+    dot3adAggPortPartnerAdminKey
+      LacpKey,
+    dot3adAggPortPartnerOperKey
+      LacpKey,
+    dot3adAggPortSelectedAggID
+      InterfaceIndex,
+    dot3adAggPortAttachedAggID
+      InterfaceIndex,
+    dot3adAggPortActorPort
+      INTEGER,
+    dot3adAggPortActorPortPriority
+      INTEGER,
+    dot3adAggPortPartnerAdminPort
+      INTEGER,
+    dot3adAggPortPartnerOperPort
+      INTEGER,
+    dot3adAggPortPartnerAdminPortPriority
+      INTEGER,
+    dot3adAggPortPartnerOperPortPriority
+      INTEGER,
+    dot3adAggPortActorAdminState
+      LacpState,
+    dot3adAggPortActorOperState
+      LacpState,
+    dot3adAggPortPartnerAdminState
+      LacpState,
+    dot3adAggPortPartnerOperState
+      LacpState,
+    dot3adAggPortAggregateOrIndividual
+      TruthValue
+}
+
+dot3adAggPortIndex OBJECT-TYPE
+  SYNTAX InterfaceIndex
+  MAX-ACCESS not-accessible
+  STATUS current
+  DESCRIPTION
+   "The ifIndex of the port"
+  REFERENCE
+   "IEEE 802.3 Subclause 30.7.2.1.1"
+::= { dot3adAggPortEntry 1 }
+
+dot3adAggPortActorSystemPriority OBJECT-TYPE
+  SYNTAX INTEGER (0..65535)
+  MAX-ACCESS read-write
+  STATUS current
+  DESCRIPTION
+   "A 2-octet read-write value used to define the priority
+    value associated with the Actor's System ID."
+  REFERENCE
+   "IEEE 802.3 Subclause 30.7.2.1.2"
+::= { dot3adAggPortEntry 2 }
+
+dot3adAggPortActorSystemID OBJECT-TYPE
+  SYNTAX MacAddress
+  MAX-ACCESS read-only
+  STATUS current
+  DESCRIPTION
+   "A 6-octet read-only MAC address value that defines
+    the value of the System ID for the System that contains this
+    Aggregation Port."
+  REFERENCE
+   "IEEE 802.3 Subclause 30.7.2.1.3"
+::= { dot3adAggPortEntry 3 }
+
+dot3adAggPortActorAdminKey OBJECT-TYPE
+  SYNTAX LacpKey
+  MAX-ACCESS read-write
+  STATUS current
+  DESCRIPTION
+   "The current administrative value of the Key for the
+    Aggregation Port.  This is a 16-bit read-write value.
+    The meaning of particular Key values is of local significance."
+  REFERENCE
+   "IEEE 802.3 Subclause 30.7.2.1.4"
+::= { dot3adAggPortEntry 4 }
+
+dot3adAggPortActorOperKey OBJECT-TYPE
+  SYNTAX LacpKey
+  MAX-ACCESS read-write
+  STATUS current
+  DESCRIPTION
+   "The current operational value of the Key for the
+    Aggregation Port.  This is a 16-bit read-only value.
+    The meaning of particular Key values is of local significance."
+  REFERENCE
+   "IEEE 802.3 Subclause 30.7.2.1.5"
+::= { dot3adAggPortEntry 5 }
+
+dot3adAggPortPartnerAdminSystemPriority OBJECT-TYPE
+  SYNTAX INTEGER (0..65535)
+  MAX-ACCESS read-write
+  STATUS current
+  DESCRIPTION
+   "A 2-octet read-write value used to define the administrative
+    value of priority associated with the Partner's System ID. The
+    assigned value is used, along with the value of
+    aAggPortPartnerAdminSystemID, aAggPortPartnerAdminKey,
+    aAggPortPartnerAdminPort, and aAggPortPartnerAdminPortPriority,
+    in order to achieve manually configured aggregation."
+  REFERENCE
+   "IEEE 802.3 Subclause 30.7.2.1.7"
+::= { dot3adAggPortEntry 6 }
+
+dot3adAggPortPartnerOperSystemPriority OBJECT-TYPE
+  SYNTAX INTEGER (0..65535)
+  MAX-ACCESS read-only
+  STATUS current
+  DESCRIPTION
+   "A 2-octet read-only value indicating the operational value
+    of priority associated with the Partner's System ID.  The
+    value of this attribute may contain the manually configured value
+    carried in aAggPortPartnerAdminSystemPriority
+    if there is no protocol Partner."
+  REFERENCE
+   "IEEE 802.3 Subclause 30.7.2.1.7"
+::= { dot3adAggPortEntry 7 }
+
+dot3adAggPortPartnerAdminSystemID OBJECT-TYPE
+  SYNTAX MacAddress
+  MAX-ACCESS read-write
+  STATUS current
+  DESCRIPTION
+   "A 6-octet read-write MACAddress value representing
+   the administrative value of the Aggregation Port's protocol
+   Partner's System ID.  The assigned value is used, along with
+   the value of aAggPortPartnerAdminSystemPriority,
+   aAggPortPartnerAdminKey, aAggPortPartnerAdminPort,
+   and aAggPortPartnerAdminPortPriority, in order to
+   achieve manually configured aggregation."
+  REFERENCE
+   "IEEE 802.3 Subclause 30.7.2.1.8"
+::= { dot3adAggPortEntry 8 }
+
+dot3adAggPortPartnerOperSystemID OBJECT-TYPE
+  SYNTAX MacAddress
+  MAX-ACCESS read-only
+  STATUS current
+  DESCRIPTION
+   "A 6-octet read-only MACAddress value representing
+    the current value of the Aggregation Port's protocol Partner's
+    System ID. A value of zero indicates that there is no known
+    protocol Partner.  The value of this attribute may contain the
+    manually configured value carried in
+    aAggPortPartnerAdminSystemID if there is no protocol Partner."
+  REFERENCE
+   "IEEE 802.3 Subclause 30.7.2.1.9"
+::= { dot3adAggPortEntry 9 }
+
+dot3adAggPortPartnerAdminKey OBJECT-TYPE
+  SYNTAX LacpKey
+  MAX-ACCESS read-write
+  STATUS current
+  DESCRIPTION
+   "The current administrative value of the Key for the
+    protocol Partner.  This is a 16-bit read-write value.
+    The assigned value is used, along with the value of
+    aAggPortPartnerAdminSystemPriority, aAggPortPartnerAdminSystemID,
+    aAggPortPartnerAdminPort, and aAggPortPartnerAdminPortPriority,
+    in order to achieve manually configured aggregation."
+  REFERENCE
+   "IEEE 802.3 Subclause 30.7.2.1.10"
+::= { dot3adAggPortEntry 10 }
+
+dot3adAggPortPartnerOperKey OBJECT-TYPE
+  SYNTAX LacpKey
+  MAX-ACCESS read-only
+  STATUS current
+  DESCRIPTION
+   "The current operational value of the Key for the
+    protocol Partner.  The value of this attribute may contain
+    the manually configured value carried in
+    aAggPortPartnerAdminKey if there is no protocol Partner.
+    This is a 16-bit read-only value."
+  REFERENCE
+   "IEEE 802.3 Subclause 30.7.2.1.11"
+::= { dot3adAggPortEntry 11 }
+
+dot3adAggPortSelectedAggID OBJECT-TYPE
+  SYNTAX InterfaceIndex
+  MAX-ACCESS read-only
+  STATUS current
+  DESCRIPTION
+  "The identifier value of the Aggregator that this Aggregation
+   Port has currently selected.  Zero indicates that the Aggregation
+   Port has not selected an Aggregator, either because it is in the
+   process of detaching from an Aggregator or because there is no
+   suitable Aggregator available for it to select.  This value is read-only."
+  REFERENCE
+   "IEEE 802.3 Subclause 30.7.2.1.12"
+::= { dot3adAggPortEntry 12 }
+
+dot3adAggPortAttachedAggID OBJECT-TYPE
+  SYNTAX InterfaceIndex
+  MAX-ACCESS read-only
+  STATUS current
+  DESCRIPTION
+   "The identifier value of the Aggregator that this Aggregation
+    Port is currently attached to.  Zero indicates that the Aggregation
+    Port is not currently attached to an Aggregator.  This value is read-only."
+  REFERENCE
+   "IEEE 802.3 Subclause 30.7.2.1.13"
+::= { dot3adAggPortEntry 13 }
+
+dot3adAggPortActorPort OBJECT-TYPE
+  SYNTAX INTEGER (0..65535)
+  MAX-ACCESS read-only
+  STATUS current
+  DESCRIPTION
+   "The port number locally assigned to the Aggregation Port.
+    The port number is communicated in LACPDUs as the
+    Actor_Port.  This value is read-only."
+  REFERENCE
+   "IEEE 802.3 Subclause 30.7.2.1.14"
+::= { dot3adAggPortEntry 14 }
+
+dot3adAggPortActorPortPriority OBJECT-TYPE
+  SYNTAX INTEGER (0..65535)
+  MAX-ACCESS read-write
+  STATUS current
+  DESCRIPTION
+   "The priority value assigned to this Aggregation Port.
+    This 16-bit value is read-write."
+  REFERENCE
+   "IEEE 802.3 Subclause 30.7.2.1.15"
+::= { dot3adAggPortEntry 15 }
+
+dot3adAggPortPartnerAdminPort OBJECT-TYPE
+  SYNTAX INTEGER (0..65535)
+  MAX-ACCESS read-write
+  STATUS current
+  DESCRIPTION
+   "The current administrative value of the port number
+    for the protocol Partner.  This is a 16-bit read-write value.
+    The assigned value is used, along with the value of
+    aAggPortPartnerAdminSystemPriority,
+    aAggPortPartnerAdminSystemID, aAggPortPartnerAdminKey,
+    and aAggPortPartnerAdminPortPriority,
+    in order to achieve manually configured aggregation."
+  REFERENCE
+   "IEEE 802.3 Subclause 30.7.2.1.16"
+::= { dot3adAggPortEntry 16 }
+
+dot3adAggPortPartnerOperPort OBJECT-TYPE
+  SYNTAX INTEGER (0..65535)
+  MAX-ACCESS read-only
+  STATUS current
+  DESCRIPTION
+   "The operational port number assigned to this Aggregation
+    Port by the Aggregation Port's protocol Partner.  The value
+    of this attribute may contain the manually configured value
+    carried in aAggPortPartnerAdminPort if there is no protocol
+    Partner.  This 16-bit value is read-only."
+  REFERENCE
+   "IEEE 802.3 Subclause 30.7.2.1.17"
+::= { dot3adAggPortEntry 17 }
+
+dot3adAggPortPartnerAdminPortPriority OBJECT-TYPE
+  SYNTAX INTEGER (0..65535)
+  MAX-ACCESS read-write
+  STATUS current
+  DESCRIPTION
+   "The current administrative value of the port priority
+    for the protocol Partner.  This is a 16-bit read-write value.
+    The assigned value is used, along with the value of
+    aAggPortPartnerAdminSystemPriority, aAggPortPartnerAdminSystemID,
+    aAggPortPartnerAdminKey, and aAggPortPartnerAdminPort,
+    in order to achieve manually configured aggregation."
+  REFERENCE
+   "IEEE 802.3 Subclause 30.7.2.1.18"
+::= { dot3adAggPortEntry 18 }
+
+dot3adAggPortPartnerOperPortPriority OBJECT-TYPE
+  SYNTAX INTEGER (0..65535)
+  MAX-ACCESS read-only
+  STATUS current
+  DESCRIPTION
+   "The priority value assigned to this Aggregation Port
+    by the Partner.  The value of this attribute may contain the
+    manually configured value carried in
+    aAggPortPartnerAdminPortPriority if there is no
+    protocol Partner.  This 16-bit value is read-only."
+  REFERENCE
+   "IEEE 802.3 Subclause 30.7.2.1.19"
+::= { dot3adAggPortEntry 19 }
+
+dot3adAggPortActorAdminState OBJECT-TYPE
+  SYNTAX LacpState
+  MAX-ACCESS read-write
+  STATUS current
+  DESCRIPTION
+   "A string of 8 bits, corresponding to the administrative values
+    of Actor_State (43.4.2) as transmitted by the Actor in LACPDUs.
+    The first bit corresponds to bit 0 of Actor_State (LACP_Activity),
+    the second bit corresponds to bit 1 (LACP_Timeout), the third bit
+    corresponds to bit 2 (Aggregation), the fourth bit corresponds to
+    bit 3 (Synchronization), the fifth bit corresponds to bit 4
+    (Collecting), the sixth bit corresponds to bit 5 (Distributing),
+    the seventh bit corresponds to bit 6 (Defaulted), and the eighth
+    bit corresponds to bit 7 (Expired).  These values allow
+    administrative control over the values of LACP_Activity,
+    LACP_Timeout and Aggregation.  This attribute value is read-write."
+  REFERENCE
+   "IEEE 802.3 Subclause 30.7.2.1.20"
+::= { dot3adAggPortEntry 20 }
+
+dot3adAggPortActorOperState OBJECT-TYPE
+  SYNTAX LacpState
+  MAX-ACCESS read-only
+  STATUS current
+  DESCRIPTION
+   "A string of 8 bits, corresponding to the current
+    operational values of Actor_State as transmitted by the
+    Actor in LACPDUs. The bit allocations are as defined in
+    30.7.2.1.20.  This attribute value is read-only."
+  REFERENCE
+   "IEEE 802.3 Subclause 30.7.2.1.21"
+::= { dot3adAggPortEntry 21 }
+
+dot3adAggPortPartnerAdminState OBJECT-TYPE
+  SYNTAX LacpState
+  MAX-ACCESS read-write
+  STATUS current
+  DESCRIPTION
+   "A string of 8 bits, corresponding to the current administrative
+    value of Actor_State for the protocol Partner.  The bit
+    allocations are as defined in 30.7.2.1.20.  This attribute value is
+    read-write.  The assigned value is used in order to achieve
+    manually configured aggregation."
+  REFERENCE
+   "IEEE 802.3 Subclause 30.7.2.1.22"
+::= { dot3adAggPortEntry 22 }
+
+dot3adAggPortPartnerOperState OBJECT-TYPE
+  SYNTAX LacpState
+  MAX-ACCESS read-only
+  STATUS current
+  DESCRIPTION
+   "A string of 8 bits, corresponding to the current values of
+    Actor_State in the most recently received LACPDU transmitted
+    by the protocol Partner.  The bit allocations are as defined in
+    30.7.2.1.20.  In the absence of an active protocol Partner, this
+    value may reflect the manually configured value
+    aAggPortPartnerAdminState.  This attribute value is read-only."
+  REFERENCE
+   "IEEE 802.3 Subclause 30.7.2.1.23"
+::= { dot3adAggPortEntry 23 }
+
+dot3adAggPortAggregateOrIndividual OBJECT-TYPE
+  SYNTAX TruthValue
+  MAX-ACCESS read-only
+  STATUS current
+  DESCRIPTION
+   "A read-only Boolean value indicating whether the
+    Aggregation Port is able to Aggregate ('TRUE ') or is
+    only able to operate as an Individual link ('FALSE ')."
+  REFERENCE
+   "IEEE 802.3 Subclause 30.7.1.1.24"
+::= { dot3adAggPortEntry 24 }
+
+
+-- -------------------------------------------------------------
+-- LACP Statistics Table
+-- -------------------------------------------------------------
+
+dot3adAggPortStatsTable OBJECT-TYPE
+  SYNTAX SEQUENCE OF Dot3adAggPortStatsEntry
+  MAX-ACCESS not-accessible
+  STATUS current
+  DESCRIPTION
+   "A table that contains Link Aggregation information
+    about every port that is associated with this device.
+    A row appears in this table for each physical port."
+  REFERENCE
+   "IEEE 802.3 Subclause 30.7.3"
+::= { dot3adAggPort 2 }
+
+dot3adAggPortStatsEntry OBJECT-TYPE
+  SYNTAX Dot3adAggPortStatsEntry
+  MAX-ACCESS not-accessible
+  STATUS current
+  DESCRIPTION
+   "A list of Link Aggregation Control Protocol statistics
+    for each port on this device."
+  INDEX { dot3adAggPortIndex }
+::= { dot3adAggPortStatsTable 1 }
+
+Dot3adAggPortStatsEntry ::=
+  SEQUENCE {
+    dot3adAggPortStatsLACPDUsRx
+      Counter32,
+    dot3adAggPortStatsMarkerPDUsRx
+      Counter32,
+    dot3adAggPortStatsMarkerResponsePDUsRx
+      Counter32,
+    dot3adAggPortStatsUnknownRx
+      Counter32,
+    dot3adAggPortStatsIllegalRx
+      Counter32,
+    dot3adAggPortStatsLACPDUsTx
+      Counter32,
+    dot3adAggPortStatsMarkerPDUsTx
+      Counter32,
+    dot3adAggPortStatsMarkerResponsePDUsTx
+      Counter32
+  }
+
+dot3adAggPortStatsLACPDUsRx OBJECT-TYPE
+  SYNTAX Counter32
+  MAX-ACCESS read-only
+  STATUS current
+  DESCRIPTION
+   "The number of valid LACPDUs received on this
+    Aggregation Port.  This value is read-only."
+  REFERENCE
+   "IEEE 802.3 Subclause 30.7.3.1.2"
+::= { dot3adAggPortStatsEntry 1 }
+
+dot3adAggPortStatsMarkerPDUsRx OBJECT-TYPE
+  SYNTAX Counter32
+  MAX-ACCESS read-only
+  STATUS current
+  DESCRIPTION
+   "The number of valid Marker PDUs received on this
+    Aggregation Port.  This value is read-only."
+  REFERENCE
+   "IEEE 802.3 Subclause 30.7.3.1.3"
+::= { dot3adAggPortStatsEntry 2 }
+
+dot3adAggPortStatsMarkerResponsePDUsRx OBJECT-TYPE
+  SYNTAX Counter32
+  MAX-ACCESS read-only
+  STATUS current
+  DESCRIPTION
+   "The number of valid Marker Response PDUs received on this
+    Aggregation Port.  This value is read-only."
+  REFERENCE
+   "IEEE 802.3 Subclause 30.7.3.1.4"
+::= { dot3adAggPortStatsEntry 3 }
+
+dot3adAggPortStatsUnknownRx OBJECT-TYPE
+  SYNTAX Counter32
+  MAX-ACCESS read-only
+  STATUS current
+  DESCRIPTION
+   "The number of frames recei ed that either:
+      - carry the Slow Protocols Ethernet Type value (43B.4),
+        but contain an unknown PDU, or:
+      - are addressed to the Slow Protocols group MAC
+        Address (43B.3), but do not carry the Slow Protocols Ethernet Type.
+    This value is read-only."
+  REFERENCE
+   "IEEE 802.3 Subclause 30.7.3.1.5"
+::= { dot3adAggPortStatsEntry 4 }
+
+dot3adAggPortStatsIllegalRx OBJECT-TYPE
+  SYNTAX Counter32
+  MAX-ACCESS read-only
+  STATUS current
+  DESCRIPTION
+   "The number of frames received that carry the Slow
+    Protocols Ethernet Type value (43B.4), but contain a badly formed
+    PDU or an illegal value of Protocol Subtype (43B.4).
+    This value is read-only."
+  REFERENCE
+   "IEEE 802.3 Subclause 30.7.3.1.6"
+::= { dot3adAggPortStatsEntry 5 }
+
+dot3adAggPortStatsLACPDUsTx OBJECT-TYPE
+  SYNTAX Counter32
+  MAX-ACCESS read-only
+  STATUS current
+  DESCRIPTION
+   "The number of LACPDUs transmitted on this
+    Aggregation Port. This value is read-only."
+  REFERENCE
+   "IEEE 802.3 Subclause 30.7.3.1.7"
+::= { dot3adAggPortStatsEntry 6 }
+
+dot3adAggPortStatsMarkerPDUsTx OBJECT-TYPE
+  SYNTAX Counter32
+  MAX-ACCESS read-only
+  STATUS current
+  DESCRIPTION
+   "The number of Marker PDUs transmitted on this
+    Aggregation Port.  This value is read-only."
+  REFERENCE
+   "IEEE 802.3 Subclause 30.7.3.1.8"
+::= { dot3adAggPortStatsEntry 7 }
+
+dot3adAggPortStatsMarkerResponsePDUsTx OBJECT-TYPE
+  SYNTAX Counter32
+  MAX-ACCESS read-only
+  STATUS current
+  DESCRIPTION
+   "The number of Marker Response PDUs transmitted
+    on this Aggregation Port.  This value is read-only."
+  REFERENCE
+   "IEEE 802.3 Subclause 30.7.3.1.9"
+::= { dot3adAggPortStatsEntry 8 }
+
+
+-- -------------------------------------------------------------
+-- LACP Debug Table
+-- -------------------------------------------------------------
+
+dot3adAggPortDebugTable OBJECT-TYPE
+  SYNTAX SEQUENCE OF Dot3adAggPortDebugEntry
+  MAX-ACCESS not-accessible
+  STATUS current
+  DESCRIPTION
+   "A table that contains Link Aggregation debug
+    information about every port that is associated with
+    this device.  A row appears in this table for each
+    physical port."
+  REFERENCE
+   "IEEE 802.3 Subclause 30.7.4"
+::= { dot3adAggPort 3 }
+
+dot3adAggPortDebugEntry OBJECT-TYPE
+  SYNTAX Dot3adAggPortDebugEntry
+  MAX-ACCESS not-accessible
+  STATUS current
+  DESCRIPTION
+   "A list of the debug parameters for a port."
+  INDEX { dot3adAggPortIndex }
+::= { dot3adAggPortDebugTable 1 }
+
+Dot3adAggPortDebugEntry ::=
+  SEQUENCE {
+    dot3adAggPortDebugRxState
+      INTEGER,
+    dot3adAggPortDebugLastRxTime
+      TimeTicks,
+    dot3adAggPortDebugMuxState
+      INTEGER,
+    dot3adAggPortDebugMuxReason
+      DisplayString,
+    dot3adAggPortDebugActorChurnState
+      ChurnState,
+    dot3adAggPortDebugPartnerChurnState
+      ChurnState,
+    dot3adAggPortDebugActorChurnCount
+      Counter32,
+    dot3adAggPortDebugPartnerChurnCount
+      Counter32,
+    dot3adAggPortDebugActorSyncTransitionCount
+      Counter32,
+    dot3adAggPortDebugPartnerSyncTransitionCount
+      Counter32,
+    dot3adAggPortDebugActorChangeCount
+      Counter32,
+    dot3adAggPortDebugPartnerChangeCount
+      Counter32
+  }
+
+dot3adAggPortDebugRxState OBJECT-TYPE
+  SYNTAX INTEGER {
+       current(1),
+       expired(2),
+       defaulted(3),
+       initialize(4),
+       lacpDisabled(5),
+       portDisabled(6)
+  }
+  MAX-ACCESS read-only
+  STATUS current
+  DESCRIPTION
+   "This attribute holds the value 'current ' if the Receive
+    state machine for the Aggregation Port is in the
+    CURRENT state, 'expired' if the Receive state machine
+    is in the EXPIRED state, 'defaulted' if the Receive state
+    machine is in the DEFAULTED state, 'initialize' if the
+    Receive state machine is in the INITIALIZE state,
+    'lacpDisabled' if the Receive state machine is in the
+    LACP_DISABLED state, or 'portDisabled' if the Receive
+    state machine is in the PORT_DISABLED state.
+    This value is read-only."
+  REFERENCE
+   "IEEE 802.3 Subclause 30.7.4.1.2"
+::= { dot3adAggPortDebugEntry 1 }
+
+dot3adAggPortDebugLastRxTime OBJECT-TYPE
+  SYNTAX TimeTicks
+  MAX-ACCESS read-only
+  STATUS current
+  DESCRIPTION
+   "The value of aTimeSinceSystemReset (F.2.1) when
+    the last LACPDU was received by this Aggregation Port.
+    This value is read-only."
+  REFERENCE
+   "IEEE 802.3 Subclause 30.7.4.1.3"
+::= { dot3adAggPortDebugEntry 2 }
+
+dot3adAggPortDebugMuxState OBJECT-TYPE
+  SYNTAX INTEGER {
+       detached(1),
+       waiting(2),
+       attached(3),
+       collecting(4),
+       distributing(5),
+       collecting-distributing(6)
+  }
+  MAX-ACCESS read-only
+  STATUS current
+  DESCRIPTION
+   "This attribute holds the value 'detached' if the Mux
+    state machine (43.4.14) for the Aggregation Port is
+    in the DETACHED state, 'waiting' if the Mux state machine
+    is in the WAITING state, 'attached' if the Mux state
+    machine for the Aggregation Port is in the ATTACHED
+    state, 'collecting' if the Mux state machine for the
+    Aggregation Port is in the COLLECTING state, 'distributing'
+    if the Mux state machine for the Aggregation Port is
+    in the DISTRIBUTING state, and 'collecting-distributing'
+    if the Mux state machine for the Aggregation Port is in
+    the COLLECTING-DISTRIBUTING state.
+    This value is read-only."
+  REFERENCE
+   "IEEE 802.3 Subclause 30.7.4.1.4"
+::= { dot3adAggPortDebugEntry 3 }
+
+dot3adAggPortDebugMuxReason OBJECT-TYPE
+  SYNTAX DisplayString
+  MAX-ACCESS read-only
+  STATUS current
+  DESCRIPTION
+   "A human-readable text string indicating the reason
+    for the most recent change of Mux machine state.
+    This value is read-only."
+  REFERENCE
+   "IEEE 802.3 Subclause 30.7.4.1.5"
+::= { dot3adAggPortDebugEntry 4 }
+
+dot3adAggPortDebugActorChurnState OBJECT-TYPE
+  SYNTAX ChurnState
+  MAX-ACCESS read-only
+  STATUS current
+  DESCRIPTION
+   "The state of the Actor Churn Detection machine
+    (43.4.17) for the Aggregation Port.  A value of 'noChurn'
+    indicates that the state machine is in either the
+    NO_ACTOR_CHURN or the ACTOR_CHURN_MONITOR
+    state, and 'churn' indicates that the state machine is in the
+    ACTOR_CHURN state.  This value is read-only."
+  REFERENCE
+   "IEEE 802.3 Subclause 30.7.4.1.6"
+::= { dot3adAggPortDebugEntry 5 }
+
+dot3adAggPortDebugPartnerChurnState OBJECT-TYPE
+  SYNTAX ChurnState
+  MAX-ACCESS read-only
+  STATUS current
+  DESCRIPTION
+   "The state of the Partner Churn Detection machine
+    (43.4.17) for the Aggregation Port.  A value of 'noChurn'
+    indicates that the state machine is in either the
+    NO_PARTNER_CHURN or the PARTNER_CHURN_MONITOR
+    state, and 'churn' indicates that the state machine is
+    in the PARTNER_CHURN state.
+    This value is read-only."
+  REFERENCE
+   "IEEE 802.3 Subclause 30.7.4.1.7"
+::= { dot3adAggPortDebugEntry 6 }
+
+dot3adAggPortDebugActorChurnCount OBJECT-TYPE
+  SYNTAX Counter32
+  MAX-ACCESS read-only
+  STATUS current
+  DESCRIPTION
+   "Count of the number of times the Actor Churn state
+    machine has entered the ACTOR_CHURN state.
+    This value is read-only."
+  REFERENCE
+   "IEEE 802.3 Subclause 30.7.4.1.8"
+::= { dot3adAggPortDebugEntry 7 }
+
+dot3adAggPortDebugPartnerChurnCount OBJECT-TYPE
+  SYNTAX Counter32
+  MAX-ACCESS read-only
+  STATUS current
+  DESCRIPTION
+   "Count of the number of times the Partner Churn
+    state machine has entered the PARTNER_CHURN state.
+    This value is read-only."
+  REFERENCE
+   "IEEE 802.3 Subclause 30.7.4.1.9"
+::= { dot3adAggPortDebugEntry 8 }
+
+dot3adAggPortDebugActorSyncTransitionCount OBJECT-TYPE
+  SYNTAX Counter32
+  MAX-ACCESS read-only
+  STATUS current
+  DESCRIPTION
+   "Count of the number of times the Actor's Mux state
+    machine (43.4.15) has entered the IN_SYNC state.
+    This value is read-only."
+  REFERENCE
+   "IEEE 802.3 Subclause 30.7.4.1.10"
+::= { dot3adAggPortDebugEntry 9 }
+
+dot3adAggPortDebugPartnerSyncTransitionCount OBJECT-TYPE
+  SYNTAX Counter32
+  MAX-ACCESS read-only
+  STATUS current
+  DESCRIPTION
+   "Count of the number of times the Partner's Mux
+    state machine (43.4.15) has entered the IN_SYNC state.
+    This value is read-only."
+  REFERENCE
+   "IEEE 802.3 Subclause 30.7.4.1.11"
+::= { dot3adAggPortDebugEntry 10 }
+
+dot3adAggPortDebugActorChangeCount OBJECT-TYPE
+  SYNTAX Counter32
+  MAX-ACCESS read-only
+  STATUS current
+  DESCRIPTION
+   "Count of the number of times the Actor's perception of
+    the LAG ID for this Aggregation Port has changed.
+    This value is read-only."
+  REFERENCE
+   "IEEE 802.3 Subclause 30.7.4.1.12"
+::= { dot3adAggPortDebugEntry 11 }
+
+dot3adAggPortDebugPartnerChangeCount OBJECT-TYPE
+  SYNTAX Counter32
+  MAX-ACCESS read-only
+  STATUS current
+  DESCRIPTION
+   "Count of the number of times the Partner's perception of
+    the LAG ID (see 43.3.6.1) for this Aggregation Port has changed.
+    This value is read-only."
+  REFERENCE
+   "IEEE 802.3 Subclause 30.7.4.1.13"
+::= { dot3adAggPortDebugEntry 12 }
+
+
+-- -------------------------------------------------------------
+-- IEEE 802.3ad MIB -Conformance Information
+-- -------------------------------------------------------------
+
+dot3adAggConformance OBJECT IDENTIFIER ::= {lagMIB 2 }
+
+dot3adAggGroups OBJECT IDENTIFIER ::= { dot3adAggConformance 1 }
+
+dot3adAggCompliances OBJECT IDENTIFIER
+::= { dot3adAggConformance 2 }
+
+
+-- -------------------------------------------------------------
+-- units of conformance
+-- -------------------------------------------------------------
+
+dot3adAggGroup OBJECT-GROUP
+  OBJECTS {
+    dot3adAggActorSystemID,
+    dot3adAggActorSystemPriority,
+    dot3adAggAggregateOrIndividual,
+    dot3adAggActorAdminKey,
+    dot3adAggMACAddress,
+    dot3adAggActorOperKey,
+    dot3adAggPartnerSystemID,
+    dot3adAggPartnerSystemPriority,
+    dot3adAggPartnerOperKey,
+    dot3adAggCollectorMaxDelay
+  }
+  STATUS current
+  DESCRIPTION
+   "A collection of objects providing information about an
+    aggregation."
+::= { dot3adAggGroups 1 }
+
+dot3adAggPortListGroup OBJECT-GROUP
+  OBJECTS {
+    dot3adAggPortListPorts
+  }
+  STATUS current
+  DESCRIPTION
+   "A collection of objects providing information about every
+    port in an aggregation."
+::= { dot3adAggGroups 2 }
+
+dot3adAggPortGroup OBJECT-GROUP
+  OBJECTS {
+    dot3adAggPortActorSystemPriority,
+    dot3adAggPortActorSystemID,
+    dot3adAggPortActorAdminKey,
+    dot3adAggPortActorOperKey,
+    dot3adAggPortPartnerAdminSystemPriority,
+    dot3adAggPortPartnerOperSystemPriority,
+    dot3adAggPortPartnerAdminSystemID,
+    dot3adAggPortPartnerOperSystemID,
+    dot3adAggPortPartnerAdminKey,
+    dot3adAggPortPartnerOperKey,
+    dot3adAggPortSelectedAggID,
+    dot3adAggPortAttachedAggID,
+    dot3adAggPortActorPort,
+    dot3adAggPortActorPortPriority,
+    dot3adAggPortPartnerAdminPort,
+    dot3adAggPortPartnerOperPort,
+    dot3adAggPortPartnerAdminPortPriority,
+    dot3adAggPortPartnerOperPortPriority,
+    dot3adAggPortActorAdminState,
+    dot3adAggPortActorOperState,
+    dot3adAggPortPartnerAdminState,
+    dot3adAggPortPartnerOperState,
+    dot3adAggPortAggregateOrIndividual
+  }
+  STATUS current
+  DESCRIPTION
+   "A collection of objects providing information about every
+    port in an aggregation."
+::= { dot3adAggGroups 3 }
+
+dot3adAggPortStatsGroup OBJECT-GROUP
+  OBJECTS {
+    dot3adAggPortStatsLACPDUsRx,
+    dot3adAggPortStatsMarkerPDUsRx,
+    dot3adAggPortStatsMarkerResponsePDUsRx,
+    dot3adAggPortStatsUnknownRx,
+    dot3adAggPortStatsIllegalRx,
+    dot3adAggPortStatsLACPDUsTx,
+    dot3adAggPortStatsMarkerPDUsTx,
+    dot3adAggPortStatsMarkerResponsePDUsTx
+  }
+  STATUS current
+  DESCRIPTION
+   "A collection of objects providing information about every
+    port in an aggregation."
+::= { dot3adAggGroups 4 }
+
+dot3adAggPortDebugGroup OBJECT-GROUP
+  OBJECTS {
+    dot3adAggPortDebugRxState,
+    dot3adAggPortDebugLastRxTime,
+    dot3adAggPortDebugMuxState,
+    dot3adAggPortDebugMuxReason,
+    dot3adAggPortDebugActorChurnState,
+    dot3adAggPortDebugPartnerChurnState,
+    dot3adAggPortDebugActorChurnCount,
+    dot3adAggPortDebugPartnerChurnCount,
+    dot3adAggPortDebugActorSyncTransitionCount,
+    dot3adAggPortDebugPartnerSyncTransitionCount,
+    dot3adAggPortDebugActorChangeCount,
+    dot3adAggPortDebugPartnerChangeCount
+  }
+  STATUS current
+  DESCRIPTION
+   "A collection of objects providing debug information about
+    every aggregated port."
+::= { dot3adAggGroups 5 }
+
+dot3adTablesLastChangedGroup OBJECT-GROUP
+  OBJECTS {
+    dot3adTablesLastChanged
+  }
+  STATUS current
+  DESCRIPTION
+   "A collection of objects providing information about the time
+    of changes to the configuration of aggregations and their ports."
+::=  { dot3adAggGroup 6 }
+
+
+-- -------------------------------------------------------------
+-- compliance statements
+-- -------------------------------------------------------------
+
+dot3adAggCompliance MODULE-COMPLIANCE
+  STATUS current
+  DESCRIPTION
+   "The compliance statement for device support of
+    Link Aggregation."
+
+  MODULE
+    MANDATORY-GROUPS {
+      dot3adAggGroup,
+      dot3adAggPortGroup,
+      dot3adTablesLastChangedGroup
+    }
+
+  GROUP dot3adAggPortListGroup
+  DESCRIPTION
+   "This group is optional."
+
+  GROUP dot3adAggPortStatsGroup
+  DESCRIPTION
+   "This group is optional."
+
+  GROUP dot3adAggPortDebugGroup
+  DESCRIPTION
+   "This group is optional."
+
+::= { dot3adAggCompliances 1 }
+
+
+END