Initial commitHEADmain

1 files changed, 772 insertions, 0 deletions

diff --git a/MIBS/quanta/dot1xAdvanced.my b/MIBS/quanta/dot1xAdvanced.my
new file mode 100644
index 0000000..367ed9b
--- /dev/null
+++ b/MIBS/quanta/dot1xAdvanced.my
@@ -0,0 +1,772 @@
+-- Dot1x Advanced Features MIB overview:
+-- Dot1x Advanced Features MIB falls under lb6m MIB node of the private subtree.
+
+NETGEAR-DOT1X-ADVANCED-FEATURES-MIB DEFINITIONS ::= BEGIN
+
+-- Netgear Dot1x Advanced Features MIB
+-- Copyright Netgear Inc (2003-2007) All rights reserved.
+
+-- This SNMP Management Information Specification
+-- embodies Netgear Inc's confidential and proprietary
+-- intellectual property.  Netgear Inc retains all title
+-- and ownership in the Specification including any revisions.
+
+-- This Specification is supplied "AS IS", Netgear Inc
+-- makes no warranty, either expressed or implied,
+-- as to the use, operation, condition, or performance of the
+-- Specification.
+
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
+    Unsigned32, TimeTicks               FROM SNMPv2-SMI
+    dot1xPaePortNumber                  FROM IEEE8021-PAE-MIB
+    TEXTUAL-CONVENTION,
+    RowStatus,MacAddress,DateAndTime    FROM SNMPv2-TC
+    DisplayString                       FROM RFC1213-MIB
+    lb6m                            FROM QUANTA-LB6M-REF-MIB;
+    
+
+    fastPathdot1xAdvanced MODULE-IDENTITY
+           LAST-UPDATED "201101260000Z" -- 26 January 2011 12:00:00 GMT
+           ORGANIZATION "Netgear Inc"
+           CONTACT-INFO ""
+           
+     DESCRIPTION
+          "The Netgear Private MIB for FastPath Dot1x Advanced Features "
+
+      -- Revision history.
+     REVISION
+          "201101260000Z" -- 26 January 2011 12:00:00 GMT
+     DESCRIPTION
+          "Postal address updated."
+     REVISION
+          "200705230000Z" -- 23 May 2007 12:00:00 GMT
+     DESCRIPTION
+          "Netgear branding related changes."
+
+      ::= { lb6m 36 }
+
+ 
+Dot1xPortControlMode ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION
+        "The control values of the Authenticator PAE controlled
+        Port."
+    SYNTAX      INTEGER {
+                    forceUnauthorized(1),
+                    auto(2),
+                    forceAuthorized(3),
+                    macBased(4)
+                }
+
+Dot1xSessionTerminationAction ::= TEXTUAL-CONVENTION
+        STATUS  current
+        DESCRIPTION
+              "The action to be taken on session termination ."
+        SYNTAX       INTEGER {
+                                default(1),
+                                reauthenticate(2)
+                              } 
+                         
+agentDot1xEnhancementConfigGroup OBJECT IDENTIFIER ::= { fastPathdot1xAdvanced 1 }
+
+    agentDot1xRadiusVlanAssignment OBJECT-TYPE
+         SYNTAX      INTEGER {
+                     enable(1),
+                     disable(2)
+                     }
+         MAX-ACCESS  read-write
+         STATUS      current
+         DESCRIPTION
+               "Enable/Disable dot1x Vlan Assignment Support on the switch."
+         DEFVAL { disable }
+         ::= { agentDot1xEnhancementConfigGroup 1 }
+
+     agentDot1xDynamicVlanCreationMode OBJECT-TYPE
+         SYNTAX      INTEGER {
+                     enable(1),
+                     disable(2)
+                     }
+         MAX-ACCESS  read-write
+         STATUS      current
+         DESCRIPTION
+               "Enable/Disable dot1x dynamic vlan creation Support on the switch."
+         DEFVAL { disable }
+         ::= { agentDot1xEnhancementConfigGroup 2 }
+
+     agentDot1xEapolFloodMode OBJECT-TYPE
+         SYNTAX      INTEGER {
+                     enable(1),
+                     disable(2)
+                     }
+         MAX-ACCESS  read-write
+         STATUS      current
+         DESCRIPTION
+               "Enable/Disable dot1x eapol flooding mode on the switch."
+         DEFVAL { disable }
+         ::= { agentDot1xEnhancementConfigGroup 3 }
+
+--**************************************************************************************
+-- agentDot1xPortConfigGroup -> Contains MIB objects configuring/displaying Dot1x Port details 
+-- and associated Functionality
+--
+--**************************************************************************************
+
+    agentDot1xPortConfigGroup OBJECT IDENTIFIER ::= { fastPathdot1xAdvanced 2 }
+
+--------------------------------------------------------------
+-- The Dot1x Enhanced Port Table
+--------------------------------------------------------------
+
+    agentDot1xPortConfigTable OBJECT-TYPE
+         SYNTAX      SEQUENCE OF AgentDot1xPortConfigEntry
+         MAX-ACCESS  not-accessible
+         STATUS      current
+         DESCRIPTION "A table for dot1x enhanced Port details and associated functionality."
+         ::= { agentDot1xPortConfigGroup 1 }
+
+    agentDot1xPortConfigEntry OBJECT-TYPE
+         SYNTAX      AgentDot1xPortConfigEntry
+         MAX-ACCESS  not-accessible
+         STATUS      current
+         DESCRIPTION "Represents entry for port config table."
+         INDEX       { dot1xPaePortNumber}
+         ::= {agentDot1xPortConfigTable 1 }
+
+    AgentDot1xPortConfigEntry ::= SEQUENCE { 
+        agentDot1xPortControlMode
+             Dot1xPortControlMode,
+        agentDot1xGuestVlanId
+             Unsigned32,
+        agentDot1xGuestVlanPeriod
+             Unsigned32,
+        agentDot1xUnauthenticatedVlan  
+             Unsigned32,
+        agentDot1xMaxUsers
+             Unsigned32,    
+        agentDot1xPortVlanAssigned
+             Unsigned32,
+        agentDot1xPortVlanAssignedReason
+             INTEGER,
+        agentDot1xPortSessionTimeout
+             Unsigned32,
+        agentDot1xPortTerminationAction
+             Dot1xSessionTerminationAction,
+        agentDot1xPortMABenabled
+             INTEGER,
+        agentDot1xPortMABenabledOperational
+             INTEGER            
+                
+    }
+
+       agentDot1xPortControlMode  OBJECT-TYPE
+                SYNTAX       Dot1xPortControlMode
+                MAX-ACCESS   read-write
+                STATUS       current
+                DESCRIPTION
+                       "Dot1x port control mode of this port.The Port control mode . 
+                        The port control mode for this interface can take the following values ,
+                                force-unauthorized - the port is in unauthorized mode,
+                                auto-Port based mode. If a client authenticates suscessfully, then the interface is authorized .
+                                     Otherwise, the port is in unauthorized mode. 
+                                     If more than one clients are attached to the port , then only one client needs to authenticate to allow other clients access.
+                                force-authorized - The port is placed in authorized mode
+                                macBased - If more than one client is attached to the port, then each client needs to authenticate separately.
+                        This object depcreates dot1xAuthAuthControlledPortControl object in IEEE8021-PAE-MIB"
+                DEFVAL {auto}
+                ::= {  agentDot1xPortConfigEntry 1}
+
+        agentDot1xGuestVlanId  OBJECT-TYPE
+                SYNTAX      Unsigned32
+                MAX-ACCESS   read-write
+                STATUS       current
+                DESCRIPTION
+                        "Specifies the Guest Vlan of the port. A port will
+                         be moved to its Guest Vlan if no client sucessfully
+                         authenticates on that port for the Guest Vlan Period. 
+                         A value of zero indicates no Guest Vlan is configured for the interface."
+                DEFVAL {0}
+                ::= { agentDot1xPortConfigEntry 2}
+
+        agentDot1xGuestVlanPeriod OBJECT-TYPE
+                SYNTAX      Unsigned32 (1..300)
+                MAX-ACCESS  read-write
+                STATUS      current
+                DESCRIPTION
+                         "The value, in seconds, of the guestVlanPeriod constant
+                         currently in use for Guest Vlan Assignment for the 
+                         port ."
+                DEFVAL { 90 }
+                ::= { agentDot1xPortConfigEntry 3 }
+
+
+        agentDot1xUnauthenticatedVlan  OBJECT-TYPE
+                SYNTAX       Unsigned32 
+                MAX-ACCESS   read-write
+                STATUS       current
+                DESCRIPTION
+                        "Specifies the Unauthenticated Vlan of the port. A port will
+                         be moved to its unauthenticated Vlan if the client authenticates unsucessfully
+                         on that port . 
+                         A value of zero indicates no Unauthenticated Vlan is configured for the port. "
+                DEFVAL {0}
+                ::= {  agentDot1xPortConfigEntry 4}
+
+        agentDot1xMaxUsers OBJECT-TYPE
+                SYNTAX      Unsigned32 
+                MAX-ACCESS   read-write
+                STATUS       current
+                DESCRIPTION
+                        " Specifies the maximum users or clients that can authenticate on this port when the port control mode is macBased.  "
+                ::= {  agentDot1xPortConfigEntry 5}
+
+        agentDot1xPortVlanAssigned OBJECT-TYPE
+                SYNTAX       Unsigned32 
+                MAX-ACCESS   read-only
+                STATUS       current
+                DESCRIPTION
+                        " Specifies the vlan the port is assigned to by Dot1x  . 
+                          Only relevant if the port control mode of the port is auto. "
+                DEFVAL {0}
+                ::= {  agentDot1xPortConfigEntry 6}
+
+        agentDot1xPortVlanAssignedReason OBJECT-TYPE
+                SYNTAX       INTEGER {
+                              default(1),
+                              radius(2),
+                              unauthenticatedVlan(3),
+                              guestVlan(4),
+                              voiceVlan(5),
+                              monitorVlan(6),
+                              notAssigned(7)  
+                        }  
+                MAX-ACCESS   read-only
+                STATUS       current
+                DESCRIPTION
+                        " Reason the port is assigned to the vlan specified by agentDot1xPortVlanAssigned . 
+                          Only relevant if the port control mode of the port is auto. "
+                DEFVAL {5}
+                ::= {  agentDot1xPortConfigEntry 7}
+
+        agentDot1xPortSessionTimeout OBJECT-TYPE
+                SYNTAX       Unsigned32
+                MAX-ACCESS   read-only
+                STATUS       current
+                DESCRIPTION
+                        " Specifies the session timeout value assigned by the Radius server for this port  . 
+                        Only relevant if the port control mode of the port is auto. "
+                ::= {  agentDot1xPortConfigEntry 8}
+
+        agentDot1xPortTerminationAction OBJECT-TYPE
+                SYNTAX      Dot1xSessionTerminationAction 
+                MAX-ACCESS   read-only
+                STATUS       current
+                DESCRIPTION
+                        " Specifies the session termination action assigned by the Radius Server .This is the action taken when the session times out . 
+                          Only relevant if the port control mode of the port is auto. "
+                DEFVAL {1}
+                ::= {  agentDot1xPortConfigEntry 9}
+
+      agentDot1xPortMABenabled OBJECT-TYPE
+                SYNTAX       INTEGER {
+                              enable(1),
+                              disable(2)                               
+                        }  
+                MAX-ACCESS   read-write
+                STATUS       current
+                DESCRIPTION
+                        " Specifies if Mac-based bypass authentication is configured for the port. "
+                DEFVAL {2}
+                ::= {  agentDot1xPortConfigEntry 10}
+
+        agentDot1xPortMABenabledOperational OBJECT-TYPE
+                SYNTAX       INTEGER {
+                              enable(1),
+                              disable(2)                               
+                        }  
+                MAX-ACCESS   read-only
+                STATUS       current
+                DESCRIPTION
+                        " Displays the operational value of the Mac-based authentication bypass mode (MAB) on the port. "
+                DEFVAL {2}
+                ::= {  agentDot1xPortConfigEntry 11}
+
+--**************************************************************************************
+-- agentDot1xClientConfigGroup -> Contains MIB objects displaying Dot1x Client details and
+-- associated Functionality
+--
+--**************************************************************************************
+
+        agentDot1xClientConfigGroup OBJECT IDENTIFIER ::= { fastPathdot1xAdvanced 3 }
+
+        agentDot1xClientConfigTable OBJECT-TYPE
+                SYNTAX      SEQUENCE OF AgentDot1xClientConfigEntry
+                MAX-ACCESS  not-accessible
+                STATUS      current
+                DESCRIPTION "A table for dot1x Client details and associated functionality."
+                ::= { agentDot1xClientConfigGroup 1 }
+
+        agentDot1xClientConfigEntry OBJECT-TYPE
+                SYNTAX      AgentDot1xClientConfigEntry
+                MAX-ACCESS  not-accessible
+                STATUS      current
+                DESCRIPTION "Represents entry for port config table."
+                INDEX       { agentDot1xClientMacAddress}
+                ::= {agentDot1xClientConfigTable 1 }
+
+        AgentDot1xClientConfigEntry ::= SEQUENCE { 
+                agentDot1xClientMacAddress
+                        MacAddress,
+                agentDot1xLogicalPort
+                        Unsigned32,
+                agentDot1xInterface
+                        Unsigned32,
+                agentDot1xClientAuthPAEstate
+                        INTEGER,
+                agentDot1xClientBackendState
+                        INTEGER,
+                agentDot1xClientUserName
+                        DisplayString,
+                agentDot1xClientSessionTime
+                        Unsigned32,
+                agentDot1xClientFilterID
+                        DisplayString,
+                agentDot1xClientVlanAssigned
+                        Unsigned32,
+                agentDot1xClientVlanAssignedReason
+                        INTEGER,
+                agentDot1xClientSessionTimeout
+                        Unsigned32,
+                agentDot1xClientTerminationAction
+                        Dot1xSessionTerminationAction
+    }    
+    
+     agentDot1xClientMacAddress  OBJECT-TYPE
+                SYNTAX           MacAddress
+                MAX-ACCESS       read-only
+                STATUS           current
+                DESCRIPTION
+                        "Specifies the client MAC address of the client. "
+                ::= { agentDot1xClientConfigEntry 1}
+
+      agentDot1xLogicalPort      OBJECT-TYPE
+                SYNTAX           Unsigned32
+                MAX-ACCESS       read-only
+                STATUS           current
+                DESCRIPTION
+                        "Specifies the client MAC address of the client . "
+                ::= { agentDot1xClientConfigEntry 2}
+
+        agentDot1xInterface      OBJECT-TYPE
+                SYNTAX           Unsigned32
+                MAX-ACCESS       read-only
+                STATUS           current
+                DESCRIPTION
+                        "Specifies the physical interface to which the client is attached . "
+                ::= { agentDot1xClientConfigEntry 3}
+
+        agentDot1xClientAuthPAEstate OBJECT-TYPE
+                 SYNTAX      INTEGER {
+                                 initialize(1),
+                                 disconnected(2),
+                                 connecting(3),
+                                 authenticating(4),
+                                 authenticated(5),
+                                 aborting(6),
+                                 held(7),
+                                 forceAuth(8),
+                                forceUnauth(9)
+                             }
+                MAX-ACCESS  read-only
+                STATUS      current
+                DESCRIPTION
+                        "The current value of the Authenticator PAE state
+                        machine for the client."
+                ::={ agentDot1xClientConfigEntry 4}
+
+        agentDot1xClientBackendState OBJECT-TYPE
+                SYNTAX      INTEGER {
+                                request(1),
+                                response(2),
+                                success(3),
+                                fail(4),
+                                timeout(5),
+                                idle(6),
+                                initialize(7)
+                            }
+                MAX-ACCESS  read-only
+                STATUS      current
+                DESCRIPTION
+                        "The current state of the Backend Authentication
+                        state machine."
+                ::={ agentDot1xClientConfigEntry 5} 
+
+        agentDot1xClientUserName OBJECT-TYPE
+                SYNTAX           DisplayString
+                MAX-ACCESS       read-only
+                STATUS           current
+                DESCRIPTION
+                        "Specifies the username with which the client is authenticated to the Radius server .
+                         This value is only valid when the client is in authenticated state.  "
+                ::= { agentDot1xClientConfigEntry 6}
+
+        agentDot1xClientSessionTime OBJECT-TYPE
+                SYNTAX              Unsigned32
+                MAX-ACCESS          read-only
+                STATUS              current
+                DESCRIPTION
+                        "Specifies the time elapsed in seconds since the client was authenticated in this session.
+                         This value is only valid when the client is in authenticated state. "
+                ::= { agentDot1xClientConfigEntry 7}
+
+        agentDot1xClientFilterID OBJECT-TYPE
+                SYNTAX              DisplayString
+                MAX-ACCESS          read-only
+                STATUS              current
+                DESCRIPTION
+                        "Specifies the Filter ID or Diffserv Policy name to be applied to the session . 
+                         This vlaue is populated only if it has been assigned by the RADIUS server.
+                         This value is only valid when the client is in authenticated state."
+                ::= { agentDot1xClientConfigEntry 8}
+
+        agentDot1xClientVlanAssigned OBJECT-TYPE
+                SYNTAX              Unsigned32
+                MAX-ACCESS          read-only
+                STATUS              current
+                DESCRIPTION
+                        "Specifies the vlan the client is associated with by Dot1x  .
+                         This value is only valid when the client is in authenticated state."
+                ::= { agentDot1xClientConfigEntry 9}
+
+        agentDot1xClientVlanAssignedReason OBJECT-TYPE
+                SYNTAX       INTEGER {
+                              default(1),
+                              radius(2),
+                              unauthenticatedVlan(3),
+                              monitorVlan(6),
+                              invalid(7)
+                            }  
+                MAX-ACCESS   read-only
+                STATUS       current
+                DESCRIPTION
+                        " Reason the client is associated to the vlan specified by agentDot1xClientVlanAssigned .
+                          This value is only valid when the client is in authenticated state." 
+                ::= {  agentDot1xClientConfigEntry 10}
+
+        agentDot1xClientSessionTimeout OBJECT-TYPE
+                SYNTAX              Unsigned32
+                MAX-ACCESS          read-only
+                STATUS              current
+                DESCRIPTION
+                        "Specifies the session time remaining for the client if  assigned by the Radius server  . 
+                         A value of 0 indicates that no session timeout was assigned by the RADIUS server.
+                         This value is only valid when the client is in authenticated state. "
+                ::= { agentDot1xClientConfigEntry 11}
+
+         agentDot1xClientTerminationAction OBJECT-TYPE
+                SYNTAX              Dot1xSessionTerminationAction
+                MAX-ACCESS          read-only
+                STATUS              current
+                DESCRIPTION
+                        "Specifies the session termination action assigned by the Radius Server .
+                        This is the action taken when the session times out .
+                        This value is only valid when the client is in authenticated state. "
+                ::= { agentDot1xClientConfigEntry 12} 
+
+ 
+
+--**************************************************************************************
+-- agentDot1xMonitorModeConfigGroup -> Contains MIB objects configuring/displaying Dot1x 
+-- Monitor Mode details and associated Functionality
+--
+--**************************************************************************************
+    agentDot1xMonitorModeConfigGroup OBJECT IDENTIFIER ::= { fastPathdot1xAdvanced 4 }
+    
+    agentDot1xMonitorModeEnabled OBJECT-TYPE
+                   SYNTAX        INTEGER {
+                                     enable(1),                                                    
+                                     disable(2)
+                                 }
+                   MAX-ACCESS    read-write
+                   STATUS        current
+                   DESCRIPTION   "Enable/Disable Dot1x Monitor mode 
+                                  Support on the switch."
+                   DEFVAL        { disable }
+                   ::= { agentDot1xMonitorModeConfigGroup 1 }
+    
+    agentDot1xMonitorModeClients OBJECT-TYPE
+           SYNTAX        Unsigned32
+           MAX-ACCESS    read-only
+           STATUS        current
+           DESCRIPTION   "Retrieves the number of clients that got 
+                          authenticated by Monitor mode globally."
+           ::= { agentDot1xMonitorModeConfigGroup 2 }
+
+    agentDot1xNonMonitorModeClients OBJECT-TYPE
+           SYNTAX        Unsigned32
+           MAX-ACCESS    read-only
+           STATUS        current
+           DESCRIPTION   "Retrieves the number of clients that are granted access by Dot1x with no monitor mode enabled."
+           ::= { agentDot1xMonitorModeConfigGroup 3 }
+
+
+--**************************************************************************************
+-- agentDot1xMonitorModeConfigGroup -> Contains MIB objects configuring/displaying Dot1x 
+-- Monitor Mode details and associated Functionality
+--
+--**************************************************************************************
+    agentDot1xAuthHistoryResultsGroup OBJECT IDENTIFIER ::= { fastPathdot1xAdvanced 5 }
+
+    agentDot1xPortAuthHistoryResultTable OBJECT-TYPE
+         SYNTAX      SEQUENCE OF AgentDot1xPortAuthHistoryResultEntry
+         MAX-ACCESS  not-accessible
+         STATUS      current
+         DESCRIPTION "A table to display the dot1x monitor mode results."
+         ::= { agentDot1xAuthHistoryResultsGroup 1 }
+
+    agentDot1xPortAuthHistoryResultEntry OBJECT-TYPE
+         SYNTAX      AgentDot1xPortAuthHistoryResultEntry
+         MAX-ACCESS  not-accessible
+         STATUS      current
+         DESCRIPTION "Represents Dot1x Authentication results for a Dot1x Authentication History table."
+         INDEX       { agentDot1xAuthHistoryResultIfaceIndex,         
+                       agentDot1xAuthHistoryResultIndex}
+         ::= {agentDot1xPortAuthHistoryResultTable 1 }
+
+    AgentDot1xPortAuthHistoryResultEntry ::= SEQUENCE {
+         agentDot1xAuthHistoryResultIfaceIndex    Unsigned32,
+         agentDot1xAuthHistoryResultIndex             Unsigned32,
+         agentDot1xAuthHistoryResultTimeStamp         DateAndTime,
+         agentDot1xAuthHistoryResultAge               TimeTicks,
+         agentDot1xAuthHistoryResultMacAddress        MacAddress,
+         agentDot1xAuthHistoryResultVlanId            Unsigned32,
+         agentDot1xAuthHistoryResultAuthStatus        INTEGER,
+         agentDot1xAuthHistoryResultAccessStatus      INTEGER,
+         agentDot1xAuthHistoryResultFilterID          DisplayString,
+         agentDot1xAuthHistoryResultVlanAssigned      Unsigned32,
+         agentDot1xAuthHistoryResultVlanAssignedType  INTEGER,
+         agentDot1xAuthHistoryResultReasonCode        INTEGER
+    }	
+
+    agentDot1xAuthHistoryResultIfaceIndex     OBJECT-TYPE
+                SYNTAX           Unsigned32
+                MAX-ACCESS       read-only
+                STATUS           current
+                DESCRIPTION      
+                   "This object represents the  physical Bridge Port on which dot1x Auth event 
+                    might be received."
+                ::= { agentDot1xPortAuthHistoryResultEntry 1 }
+
+    agentDot1xAuthHistoryResultIndex     OBJECT-TYPE
+                SYNTAX           Unsigned32
+                MAX-ACCESS       read-only
+                STATUS           current
+                DESCRIPTION
+                        "Reference to the Dot1x Authentication history table maintained."
+                ::= { agentDot1xPortAuthHistoryResultEntry 2 }
+
+    agentDot1xAuthHistoryResultTimeStamp     OBJECT-TYPE
+                SYNTAX           DateAndTime
+                MAX-ACCESS       read-only
+                STATUS           current
+                DESCRIPTION
+                        "Specifies the exact time of Dot1x Authentication 
+                         event information occurred maintained in the 
+                         history table."
+                ::= { agentDot1xPortAuthHistoryResultEntry 3 }
+
+    agentDot1xAuthHistoryResultAge OBJECT-TYPE
+         SYNTAX      TimeTicks
+         MAX-ACCESS  read-only
+         STATUS      current
+         DESCRIPTION
+                     "Time since the authentication entry was added to the history table. It is displayed in days, hours, minutes, and seconds."
+         ::= { agentDot1xPortAuthHistoryResultEntry 4 }
+
+    agentDot1xAuthHistoryResultMacAddress     OBJECT-TYPE
+                SYNTAX           MacAddress
+                MAX-ACCESS       read-only
+                STATUS           current
+                DESCRIPTION
+                        "Specifies the client MAC Address maintained in 
+                         the Dot1x Authentication history table."
+                ::= { agentDot1xPortAuthHistoryResultEntry 5 }
+
+    agentDot1xAuthHistoryResultVlanId     OBJECT-TYPE
+                SYNTAX           Unsigned32
+                MAX-ACCESS       read-only
+                STATUS           current
+                DESCRIPTION
+                        "Specifies the VLANID maintained in the history 
+                         table. It is the VLANID which is failed to 
+                         associate to the port during authentication process.
+                         The VLANID is identified distinctly by the Reason 
+                         code for the respective entry. Valid only when the
+                         reason code is set to 13 (VLAN assignment failure). 
+                         In all the other cases, VLANID is set to 0. "
+                ::= { agentDot1xPortAuthHistoryResultEntry 6 }
+
+    agentDot1xAuthHistoryResultAuthStatus     OBJECT-TYPE
+                SYNTAX       INTEGER {
+                              success(1),
+                              failure(2)
+                            }           
+                MAX-ACCESS       read-only
+                STATUS           current
+                DESCRIPTION
+                        "Specifies the Dot1x Authentication status (Success or Failure) for the Dot1x Authentication event takes place. "
+                ::= { agentDot1xPortAuthHistoryResultEntry 7 }
+
+    agentDot1xAuthHistoryResultAccessStatus     OBJECT-TYPE
+                SYNTAX       INTEGER {
+                              granted(1),
+                              denied(2)
+                            }           
+                MAX-ACCESS       read-only
+                STATUS           current
+                DESCRIPTION
+                        " Authentication access status indicates the exact status of the dot1x client. 
+                          Granted means the client is allowed access to the network using dot1x or monitor mode. 
+                          Denied means the client is not allowed access to the network."
+                ::= { agentDot1xPortAuthHistoryResultEntry 8 }
+
+    agentDot1xAuthHistoryResultFilterID OBJECT-TYPE
+          SYNTAX              DisplayString
+          MAX-ACCESS          read-only
+          STATUS              current
+          DESCRIPTION
+                        "Specifies the Filter ID or Diffserv Policy name assigned by the RADIUS server. 
+                         This value is only valid when the client is in authenticated state."
+                ::= { agentDot1xPortAuthHistoryResultEntry 9 }
+
+    agentDot1xAuthHistoryResultVlanAssigned     OBJECT-TYPE
+                SYNTAX           Unsigned32
+                MAX-ACCESS       read-only
+                STATUS           current
+                DESCRIPTION
+                        "Specifies the VLANID maintained in the history 
+                         table (It is the VLANID Assigned to a Port or Client authenticate)."
+                ::= { agentDot1xPortAuthHistoryResultEntry 10 }
+
+    agentDot1xAuthHistoryResultVlanAssignedType     OBJECT-TYPE
+                SYNTAX           INTEGER {
+                                   default(1),
+                                   radius(2),
+                                   unauthenticatedVlan(3),
+                                   guestVlan(4),
+                                   voiceVlan(5),
+                                   monitorVlan(6),
+                                   notAssigned(7)  
+                                 }  
+                MAX-ACCESS       read-only
+                STATUS           current
+                DESCRIPTION
+                        "Specifies the VLAN Assigned Reason maintained in the history 
+                         table."
+                ::= { agentDot1xPortAuthHistoryResultEntry 11 }
+
+
+    agentDot1xAuthHistoryResultReasonCode OBJECT-TYPE
+          SYNTAX       INTEGER {
+                          supplicant-timeout(1),                        
+                          eapol-timeout(2),
+                          radius-request-timeout(3),
+                          radius-auth-failure(4),
+                          radius-auth-comm-failure(5),
+                          radius-challenge-process-invalid-nas-port(6),
+                          radius-challenge-process-wrong-eap-msg(7),
+                          radius-request-send-msg-error(8),
+                          radius-accept-process-invalid-nas-port(9),
+                          radius-accept-process-wrong-eap-msg(10),
+                          radius-accept-filter-assignment-failure(11),
+                          radius-accept-diffserv-not-present(12),
+                          radius-accept-vlan-assignment-failure(13),
+                          vlan-assignment-feature-not-enabled(14),
+                          radius-success(15),
+                          local-auth-user-not-found(16),
+                          local-auth-user-no-access(17),
+                          local-auth-md5-validation-failure(18),
+                          local-auth-invalid-eap-type(19),
+                          local-failure(20),
+                          local-success(21),
+                          radius-invalid-radius-status(22),
+                          guest-vlan-timer-expiry(23),
+                          undefined-auth-method(24),
+                          reject-auth-method(25),
+                          invalid-auth-method(26),
+                          auth-method-not-configured(27),
+                          unauth-vlan-not-created(28),
+                          guest-vlan-not-created(29),
+                          radius-accept-invalid-vlan-failure(30)
+                    }
+           MAX-ACCESS    read-only
+           STATUS        current
+           DESCRIPTION   "Specifies the Dot1x authentication reason 
+                          refered by the result index on a port."
+           ::= { agentDot1xPortAuthHistoryResultEntry 12 }
+
+
+    agentDot1xAuthHistoryResultsClear OBJECT-TYPE
+         SYNTAX      INTEGER {
+                     enable(1),
+                     disable(2)
+                     }
+         MAX-ACCESS  read-write
+         STATUS      current
+         DESCRIPTION
+                     "When set to enable(1), all Dot1x Authentication History information will be reset."
+         DEFVAL { disable }
+         ::= { agentDot1xAuthHistoryResultsGroup 2 }
+
+    --**************************************************************************************
+    -- agentDot1xPortAuthHistoryResultClearTable
+    --
+    --**************************************************************************************
+
+    agentDot1xPortAuthHistoryResultClearTable OBJECT-TYPE
+         SYNTAX      SEQUENCE OF AgentDot1xPortAuthHistoryResultClearEntry 
+         MAX-ACCESS  not-accessible
+         STATUS      current
+         DESCRIPTION "A table to clear the dot1x monitor mode results per interface."
+         ::= { agentDot1xAuthHistoryResultsGroup 3 }
+
+    agentDot1xPortAuthHistoryResultClearEntry OBJECT-TYPE
+         SYNTAX      AgentDot1xPortAuthHistoryResultClearEntry
+         MAX-ACCESS  not-accessible
+         STATUS      current
+         DESCRIPTION "Represents to clear the Dot1x Authentication results for a Dot1x Authentication History table."
+         INDEX       { agentDot1xAuthHistoryResultIfIndex }         
+         ::= {agentDot1xPortAuthHistoryResultClearTable 1 }
+
+    AgentDot1xPortAuthHistoryResultClearEntry ::= SEQUENCE {
+         agentDot1xAuthHistoryResultIfIndex    Unsigned32,
+         agentDot1xPortAuthHistoryResultsClear    INTEGER 
+    }
+ 
+    agentDot1xAuthHistoryResultIfIndex     OBJECT-TYPE
+                SYNTAX           Unsigned32
+                MAX-ACCESS       read-only
+                STATUS           current
+                DESCRIPTION      
+                   "This object represents the  physical Bridge Port on which dot1x Auth event 
+                    might be received."
+                ::= { agentDot1xPortAuthHistoryResultClearEntry 1 }
+
+
+    agentDot1xPortAuthHistoryResultsClear OBJECT-TYPE
+         SYNTAX      INTEGER {
+                     enable(1),
+                     disable(2)
+                     }
+         MAX-ACCESS  read-write
+         STATUS      current
+         DESCRIPTION
+                     "When set to enable(1), all Dot1x Authentication History information for 
+                      the given port will be reset. The value is write-only. Attempt to read
+                      will return disable(2)."
+         DEFVAL { disable }
+         ::= { agentDot1xPortAuthHistoryResultClearEntry 2 }
+
+
+END