diff options
| author | David Leutgeb <david.leutgeb@mannundmouse.com> | 2023-12-05 12:25:34 +0100 |
|---|---|---|
| committer | David Leutgeb <david.leutgeb@mannundmouse.com> | 2023-12-05 12:25:34 +0100 |
| commit | 98a672123c7872f6b9b75a9a2b6bb3aea504de6a (patch) | |
| tree | 9b13bd7f563c3198047bd359195327cf28b3caf0 /MIBS/nokia/aos7/ALCATEL-IND1-TIMETRA-MPLS-MIB | |
| download | mibs-98a672123c7872f6b9b75a9a2b6bb3aea504de6a.tar.gz mibs-98a672123c7872f6b9b75a9a2b6bb3aea504de6a.zip | |
Diffstat (limited to 'MIBS/nokia/aos7/ALCATEL-IND1-TIMETRA-MPLS-MIB')
| -rw-r--r-- | MIBS/nokia/aos7/ALCATEL-IND1-TIMETRA-MPLS-MIB | 3900 |
1 files changed, 3900 insertions, 0 deletions
diff --git a/MIBS/nokia/aos7/ALCATEL-IND1-TIMETRA-MPLS-MIB b/MIBS/nokia/aos7/ALCATEL-IND1-TIMETRA-MPLS-MIB new file mode 100644 index 0000000..1de9cce --- /dev/null +++ b/MIBS/nokia/aos7/ALCATEL-IND1-TIMETRA-MPLS-MIB @@ -0,0 +1,3900 @@ +ALCATEL-IND1-TIMETRA-MPLS-MIB DEFINITIONS ::= BEGIN + +IMPORTS + MODULE-IDENTITY, OBJECT-TYPE, + NOTIFICATION-TYPE, + Unsigned32, IpAddress, Counter64, + Counter32, Integer32 FROM SNMPv2-SMI + + MODULE-COMPLIANCE, OBJECT-GROUP, + NOTIFICATION-GROUP FROM SNMPv2-CONF + + RowStatus, RowPointer, + TruthValue, TimeStamp, + TimeInterval, TestAndIncr, + TEXTUAL-CONVENTION FROM SNMPv2-TC + + InterfaceIndexOrZero FROM IF-MIB + + InetAddressIPv6 FROM INET-ADDRESS-MIB + + MplsLabel, MplsLSPID, + mplsXCLspId FROM MPLS-LSR-MIB + + mplsTunnelIndex, mplsTunnelInstance, + mplsTunnelIngressLSRId, mplsTunnelARHopEntry FROM MPLS-TE-MIB + + TmnxAdminState, TmnxOperState, + TNamedItem, TNamedItemOrEmpty, + TmnxActionType, TmnxVRtrMplsLspID FROM ALCATEL-IND1-TIMETRA-TC-MIB + + timetraSRMIBModules, tmnxSRObjs, + tmnxSRNotifyPrefix, tmnxSRConfs FROM ALCATEL-IND1-TIMETRA-GLOBAL-MIB + + vRtrID, vRtrIfIndex FROM ALCATEL-IND1-TIMETRA-VRTR-MIB + ; + +timetraMplsMIBModule MODULE-IDENTITY + LAST-UPDATED "0801010000Z" + ORGANIZATION "Alcatel" + CONTACT-INFO + "Alcatel 7x50 Support + Web: http://www.alcatel.com/comps/pages/carrier_support.jhtml" + DESCRIPTION + "This document is the SNMP MIB module to manage and provision the + MPLS extensions for the Alcatel 7x50 device. + + Copyright 2003-2008 Alcatel-Lucent. All rights reserved. + Reproduction of this document is authorized on the condition that + the foregoing copyright notice is included. + + This SNMP MIB module (Specification) embodies Alcatel's + proprietary intellectual property. Alcatel retains + all title and ownership in the Specification, including any + revisions. + + Alcatel grants all interested parties a non-exclusive + license to use and distribute an unmodified copy of this + Specification in connection with management of Alcatel + products, and without fee, provided this copyright notice and + license appear on all copies. + + This Specification is supplied 'as is', and Alcatel + makes no warranty, either express or implied, as to the use, + operation, condition, or performance of the Specification." +-- +-- Revision History +-- + REVISION "0801010000Z" + DESCRIPTION "Rev 6.0 01 Jan 2008 00:00 + 6.0 release of the TIMETRA-MPLS-MIB." + + REVISION "0701010000Z" + DESCRIPTION "Rev 5.0 01 Jan 2007 00:00 + 5.0 release of the TIMETRA-MPLS-MIB." + + REVISION "0603230000Z" + DESCRIPTION "Rev 4.0 23 Mar 2006 00:00 + 4.0 release of the TIMETRA-MPLS-MIB." + + REVISION "0508310000Z" + DESCRIPTION "Rev 3.0 31 Aug 2005 00:00 + 3.0 release of the TIMETRA-MPLS-MIB." + + REVISION "0501240000Z" + DESCRIPTION "Rev 2.1 24 Jan 2005 00:00 + 2.1 release of the TIMETRA-MPLS-MIB." + + REVISION "0401150000Z" + DESCRIPTION "Rev 2.0 15 Jan 2004 00:00 + 2.0 release of the TIMETRA-MPLS-MIB." + + REVISION "0308150000Z" + DESCRIPTION "Rev 1.2 15 Aug 2003 00:00 + 1.2 release of the TIMETRA-MPLS-MIB." + + REVISION "0009070000Z" + DESCRIPTION "Rev 1.0 20 Jan 2003 00:00 + 1.0 Release of the TIMETRA-MPLS-MIB." + + REVISION "0008140000Z" + DESCRIPTION "Rev 0.1 14 Aug 2000 00:00 + Initial version of the TIMETRA-MPLS-MIB." + + ::= { timetraSRMIBModules 6 } + +tmnxMplsObjs OBJECT IDENTIFIER ::= { tmnxSRObjs 6 } +tmnxMplsConformance OBJECT IDENTIFIER ::= { tmnxSRConfs 6 } +tmnxMplsNotifyPrefix OBJECT IDENTIFIER ::= { tmnxSRNotifyPrefix 6 } + tmnxMplsNotifications OBJECT IDENTIFIER ::= { tmnxMplsNotifyPrefix 0 } + +--%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +-- +-- MPLS extensions +-- + + +-- Textual Conventions + +TmnxMplsLspFailCode ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "TmnxMplsLspFailCode is an enumerated integer that defines the + reason for LSP Path and LSP Crossconnect failure." + SYNTAX INTEGER { + noError (0), + admissionControlError (1), + noRouteToDestination (2), + trafficControlSystemError (3), + routingError (4), + noResourcesAvailable (5), + badNode (6), + routingLoop (7), + labelAllocationError (8), + badL3PID (9), + tunnelLocallyRepaired (10), + unknownObjectClass (11), + unknownCType (12), + noEgressMplsInterface (13), + noEgressRsvpInterface (14), + looseHopsInFRRLsp (15), + unknown (16), + retryExceeded (17), + noCspfRouteOwner (18), + noCspfRouteToDestination (19), + hopLimitExceeded (20), + looseHopsInManualBypassLsp (21), + emptyPathInManualBypassLsp (22), + lspFlowControlled (23), + srlgSecondaryNotDisjoint (24), + srlgPrimaryCspfDisabled (25), + srlgPrimaryPathDown (26) + } + +TmnxMplsLabelOwner ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "TmnxMplsLabelOwner is an enumerated integer that specifies + the module that owns a particular MPLS label." + SYNTAX INTEGER { + none (0), + rsvp (1), + tldp (2), + ildp (3), + svcmgr (4), + bgp (5), + mirror (6), + static (7), + vprn (8) + } + +TmnxMplsOperDownReasonCode ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "TmnxMplsOperDownReasonCode is an enumerated integer that specifies + the reason that the MPLS instance is operationally down." + SYNTAX INTEGER { + operUp (0), -- Operationally up + adminDown (1), -- Administratively down + noResources (2), -- No resources available + systemIpDown (3), -- System IP interface is + -- operationally down + iomFailure (4), -- Iom failure + clearDown (5) -- Clear command in progress + } +-- +-- The Virtual Router MPLS Labeled Switch Path (LSP) Table +-- +vRtrMplsLspTable OBJECT-TYPE + SYNTAX SEQUENCE OF VRtrMplsLspEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The vRtrMplsLspTable has an entry for each Labeled Switch + Path (LSP) configured for a virtual router in the system." + ::= { tmnxMplsObjs 1 } + +vRtrMplsLspEntry OBJECT-TYPE + SYNTAX VRtrMplsLspEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Each row entry represents a Labeled Switch Path (LSP) configured + for a virtual router in the system. Entries can be created and + deleted via SNMP SET operations. Setting RowStatus to 'active' + requires vRtrMplsLspName to have been assigned a valid value." + INDEX { vRtrID, vRtrMplsLspIndex } + ::= { vRtrMplsLspTable 1 } + +VRtrMplsLspEntry ::= SEQUENCE { + vRtrMplsLspIndex TmnxVRtrMplsLspID, + vRtrMplsLspRowStatus RowStatus, + vRtrMplsLspLastChange TimeStamp, + vRtrMplsLspName TNamedItemOrEmpty, + vRtrMplsLspAdminState TmnxAdminState, + vRtrMplsLspOperState TmnxOperState, + vRtrMplsLspFromAddr IpAddress, + vRtrMplsLspToAddr IpAddress, + vRtrMplsLspType INTEGER, + vRtrMplsLspOutSegIndx Integer32, + vRtrMplsLspRetryTimer Unsigned32, + vRtrMplsLspRetryLimit Unsigned32, + vRtrMplsLspMetric Unsigned32, + vRtrMplsLspDecrementTtl TruthValue, + vRtrMplsLspCspf TruthValue, + vRtrMplsLspFastReroute TruthValue, + vRtrMplsLspFRHopLimit Unsigned32, + vRtrMplsLspFRBandwidth Unsigned32, + vRtrMplsLspClassOfService TNamedItemOrEmpty, + vRtrMplsLspSetupPriority Unsigned32, + vRtrMplsLspHoldPriority Unsigned32, + vRtrMplsLspRecord TruthValue, + vRtrMplsLspPreference Unsigned32, + vRtrMplsLspBandwidth Integer32, + vRtrMplsLspBwProtect TruthValue, + vRtrMplsLspHopLimit Unsigned32, + vRtrMplsLspNegotiatedMTU Unsigned32, + vRtrMplsLspRsvpResvStyle INTEGER, + vRtrMplsLspRsvpAdspec TruthValue, + vRtrMplsLspFRMethod INTEGER, + vRtrMplsLspFRNodeProtect TruthValue, + vRtrMplsLspAdminGroupInclude Unsigned32, + vRtrMplsLspAdminGroupExclude Unsigned32, + vRtrMplsLspAdaptive TruthValue, + vRtrMplsLspInheritance Unsigned32, + vRtrMplsLspOptimizeTimer Unsigned32, + vRtrMplsLspOperFastReroute TruthValue, + vRtrMplsLspFRObject TruthValue, + vRtrMplsLspHoldTimer Unsigned32, + vRtrMplsLspCspfTeMetricEnabled TruthValue +} + +vRtrMplsLspIndex OBJECT-TYPE + SYNTAX TmnxVRtrMplsLspID + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "The unique value which identifies this Labeled Switch + Path (LSP) for this virtual router in the Alcatel 7x50 + SR system. It is a unique value among entries with the + same value of vRtrID." + ::= { vRtrMplsLspEntry 1 } + +vRtrMplsLspRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The row status used for creation, deletion, or control + of vRtrMplsLspTable entries. Before the row can be + placed into the 'active' state vRtrMplsLspName must + have been assigned a valid value." + ::= { vRtrMplsLspEntry 2 } + +vRtrMplsLspLastChange OBJECT-TYPE + SYNTAX TimeStamp + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The sysUpTime when this row was last modified." + ::= { vRtrMplsLspEntry 3 } + +vRtrMplsLspName OBJECT-TYPE + SYNTAX TNamedItemOrEmpty + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Administrative name for this Labeled Switch Path. + The vRtrMplsLspName must be unique within a virtual + router instance." + ::= { vRtrMplsLspEntry 4 } + +vRtrMplsLspAdminState OBJECT-TYPE + SYNTAX TmnxAdminState + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The desired administrative state for this LSP." + DEFVAL { inService } + ::= { vRtrMplsLspEntry 5 } + +vRtrMplsLspOperState OBJECT-TYPE + SYNTAX TmnxOperState + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The current operational state of this LSP." + ::= { vRtrMplsLspEntry 6 } + +vRtrMplsLspFromAddr OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Source IP address of this LSP. If vRtrMplsLspFromAddr has not + been explicitly set, the system IP address will be used." + ::= { vRtrMplsLspEntry 7 } + +vRtrMplsLspToAddr OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Destination IP address of this LSP. This LSP will not be + signaled until vRtrMplsLspToAddr is explicitly set." + ::= { vRtrMplsLspEntry 8 } + +vRtrMplsLspType OBJECT-TYPE + SYNTAX INTEGER { + unknown (1), + dynamic (2), + static (3), + bypass-only (4) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The vRtrMplsLspType object is an enumerated value that indicates + whether the label value is statically or dynamically assigned or + whether the LSP will be used exclusively for bypass protection." + DEFVAL { dynamic } + ::= { vRtrMplsLspEntry 9 } + +vRtrMplsLspOutSegIndx OBJECT-TYPE + SYNTAX Integer32 (0..2147483647) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The vRtrMplsLspOutSegIndx is the index value of the entry in + the mplsOutSegmentTable associated with this vRtrMplsLspEntry + when vRtrMplsLspType is 'static'. If vRtrMplsLspType is + 'dynamic', the value of this object will be zero (0)." + DEFVAL { 0 } + ::= { vRtrMplsLspEntry 10 } + +vRtrMplsLspRetryTimer OBJECT-TYPE + SYNTAX Unsigned32 (1..600) + UNITS "seconds" + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The value of vRtrMplsLspRetryTimer specifies the time in seconds + the software will wait before attempting the establish the + failed LSP." + DEFVAL { 30 } + ::= { vRtrMplsLspEntry 11 } + +vRtrMplsLspRetryLimit OBJECT-TYPE + SYNTAX Unsigned32 (0..10000) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The value of vRtrMplsLspRetryLimit specifies the number of + attempts the software should make to reestablish a failed LSP + before the LSP is disabled. A value of 0 indicates that an + infinite number of retry attempts should be made." + DEFVAL { 0 } + ::= { vRtrMplsLspEntry 12 } + +vRtrMplsLspMetric OBJECT-TYPE + SYNTAX Unsigned32 (1..65535) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The value of vRtrMplsLspMetric specifies the metric for this + LSP which is used to select an LSP among a set of LSPs which are + destined to the same egress 7x50 router. The LSP with the lowest + metric will be selected. + + In LDP-over-RSVP, LDP performs a lookup in the Routing Table + Manager (RTM) which provides the next hop to the destination PE + and the advertising router (ABR or destination PE itself). If the + advertising router matches the targeted LDP peer, LDP then + performs a second lookup for the advertising router in the Tunnel + Table Manager (TTM). This lookup returns the best RSVP LSP to use + to forward packets for an LDP FEC learned through the targeted + LDP session. The lookup returns the LSP with the lowest metric. + If multiple LSPs have the same metric, then the result of the + lookup will be to select the first one available in the TTM." + DEFVAL { 1 } + ::= { vRtrMplsLspEntry 13 } + +vRtrMplsLspDecrementTtl OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "When the value of vRtrMplsLspDecrementTtl is 'true', the ingress + ESR writes the TTL of the IP packet into the label and each + transit ESR decrements the TTL in the label. At the egress ESR + the TTL value from the label is written into the IP packet. + + When the value of vRtrMplsLspDecrementTtl is 'false', the ingress + ESR ignores the IP packet TTL and writes the value of 255 into the + label; and the egress ESR does not write the label's TTL into the + IP packet." + DEFVAL { true } + ::= { vRtrMplsLspEntry 14 } + +vRtrMplsLspCspf OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "When the value of vRtrMplsLspCspf is 'true', CSPF computation + for constrained-path LSP is enabled. When the value of + vRtrMplsLspCspf is 'false' CSPF computation is disabled." + DEFVAL { false } + ::= { vRtrMplsLspEntry 15 } + +vRtrMplsLspFastReroute OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "When the value of vRtrMplsLspFastReroute is 'true', fast reroute + is enabled. A pre-computed detour LSP is created from each node + in the primary path of this LSP. In case of a failure of a link + or LSP between two nodes, traffic is immediately rerouted on the + pre-computed detour LSP thus avoiding packet loss. Each node + along the primary path of the LSP tries to establish a detour LSP + as follows: Each upstream node will setup a detour LSP that + avoids only the immediate downstream node and merges back onto + the actual path of the LSP as soon as possible. The detour LSP + may take one or more hops (upto the value of vRtrMplsLspFRHopLimit) + before merging back onto the main LSP path. + + When the upstream node detects a downstream link or node failure, + it immediately send traffic for that LSP on the detour path and + at the same time signals back to the ingress ESR about the + failure. + + Fast reroute applies only to the primary path of this LSP. + No configuration is required on the transit hops of the LSP. + The ingress ESR will signal all intermediate ESRs using RSVP + to setup their detours. + + When the value of vRtrMplsLspFastReroute is 'false', fast + rerouting is disabled." + DEFVAL { false } + ::= { vRtrMplsLspEntry 16 } + +vRtrMplsLspFRHopLimit OBJECT-TYPE + SYNTAX Unsigned32 (0..255) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The value of vRtrMplsLspFRHopLimit specifies the total number + of hops a detour LSP can take before merging back onto the + main LSP path." + DEFVAL { 16 } + ::= { vRtrMplsLspEntry 17 } + +vRtrMplsLspFRBandwidth OBJECT-TYPE + SYNTAX Unsigned32 + UNITS "mega-bits per second" + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The value of vRtrMplsLspFRBandwidth specified the amount of + bandwidth in mega-bits per second (Mbps) to be reserved for the + detour LSP. A value of zero (0) indicates that no bandwidth + is reserved." + DEFVAL { 0 } + ::= { vRtrMplsLspEntry 18 } + +vRtrMplsLspClassOfService OBJECT-TYPE + SYNTAX TNamedItemOrEmpty + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The name of the class of service value to be assigned to all + packets on the LSP is specified with vRtrMplsLspClassOfService. + The EXP bits in the MPLS header are set based on the global + mapping table that specified the mapping between the forwarding + class and the EXP bits. When class of service is specified, + all packets will be marked with the same EXP bits that match + the vRtrMplsLspClassOfService name in the mapping table. + + An empty string, ''H, specifies no class of service. Packets + are assigned EXP bits based on the same mapping table, however + each packet is marked with EXP bits based on the forwarding + class from which it is serviced. + + When the value of vRtrMplsLspPathCosSource is set to 'inherit', + the value of vRtrMplsLspClassOfService is applied to that + specific LSP/path." + DEFVAL { ''H } + ::= { vRtrMplsLspEntry 19 } + +vRtrMplsLspSetupPriority OBJECT-TYPE + SYNTAX Unsigned32 (0..7) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The value of vRtrMplsLspSetupPriority specifies the setup priority + to use when insufficient bandwidth is available to setup a LSP. + The setup priority is compared against the hold priority of + existing LSPs. If the setup priority is higher than the hold + priority of the established LSPs, this LSP may preempt the other + LSPs. A value of zero (0) is the highest priority and a value + of seven (7) is the lowest priority. + + When the value of vRtrMplsLspPathSetupPriority is set to '-1', + the value of vRtrMplsLspSetupPriority is applied to that specific + LSP/path." + DEFVAL { 7 } + ::= { vRtrMplsLspEntry 20 } + +vRtrMplsLspHoldPriority OBJECT-TYPE + SYNTAX Unsigned32 (0..7) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The value of vRtrMplsLspHoldPriority specifies the hold priority + to use when insufficient bandwidth is available to setup a LSP. + The setup priority is compared against the hold priority of + existing LSPs. If the setup priority is higher than the hold + priority of the established LSPs, this LSP may preempt the other + LSPs. A value of zero (0) is the highest priority and a value + of seven (7) is the lowest priority. + + When the value of vRtrMplsLspPathHoldPriority is set to '-1', + the value of vRtrMplsLspHoldPriority is applied to that specific + LSP/path." + DEFVAL { 0 } + ::= { vRtrMplsLspEntry 21 } + +vRtrMplsLspRecord OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "When the value of vRtrMplsLspRecord is 'true', recording of all + the hops that a LSP traverses is enabled. + + When the value of vRtrMplsLspRecord is 'false, recording of all + the hops that a LSP traverses is disabled." + DEFVAL { true } + ::= { vRtrMplsLspEntry 22 } + +vRtrMplsLspPreference OBJECT-TYPE + SYNTAX Unsigned32 (1..255) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The value of vRtrMplsLspPreference specifies the preference for + the LSP. This value is used for load balancing between multiple + LSPs that exist between the same ingress and egress routers. + By default, traffic is load balanced among the LSPs, since all + LSPs have the same preference. To prefer one LSP over another, + change the preference value for that LSP. The LSP with the + lowest preference is used. + + When the value of vRtrMplsLspPathPreference is set to zero (0), + the value of vRtrMplsLspPreference is applied to that specific + LSP/path." + DEFVAL { 7 } + ::= { vRtrMplsLspEntry 23 } + +vRtrMplsLspBandwidth OBJECT-TYPE + SYNTAX Integer32 + UNITS "mega-bits per second" + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The value of vRtrMplsLspBandwidth specifies the amount of + bandwidth in mega-bits per second (Mbps) to be reserved for the LSP. + A value of zero (0) indicates that no bandwidth is reserved. + + When vRtrMplsLspPathBandwidth is set to -1, the value of + vRtrMplsLspBandwidth is applied to that specific LSP/path." + DEFVAL { 0 } + ::= { vRtrMplsLspEntry 24 } + +vRtrMplsLspBwProtect OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "When vRtrMplsLspBwProtect has a value of 'true', bandwidth + protection is enabled on a LSP. LSPs that reserve bandwidth + will be used for EF services where customers need guaranteed + bandwidth. It is expected that multiple EF services will be + assigned to a single LSP. When bandwidth protection is + enabled on an LSP, each time this LSP is used for a certain + service the bandwidth allocated on that service is deducted + from the bandwidth reserved for the LSP. Once the bandwidth is + exhausted on the LSP, the ESR will provide feedback to the + provider indicating that this LSP has exhausted its resources." + DEFVAL { false } + ::= { vRtrMplsLspEntry 25 } + +vRtrMplsLspHopLimit OBJECT-TYPE + SYNTAX Unsigned32 (2..255) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The value of vRtrMplsLspHopLimit specifies the maximum number + of hops that a LSP will traverse including the ingress and + egress ESRs. A LSP will not be setup if the hop limit is + exceeded. + + When the value of vRtrMplsLspPathHopLimit is set to zero (0), + the value of vRtrMplsLspHopLimit is applied to that specific + LSP/path." + DEFVAL { 255 } + ::= { vRtrMplsLspEntry 26 } + +vRtrMplsLspNegotiatedMTU OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of vRtrMplsLspNegotiatedMTU specifies the size + for the Maximum transmission unit (MTU) that is negotiated + during LSP establishment." + DEFVAL { 0 } + ::= { vRtrMplsLspEntry 27 } + +vRtrMplsLspRsvpResvStyle OBJECT-TYPE + SYNTAX INTEGER { + se (1), + ff (2) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The value of vRtrMplsLspRsvpResvStyle specifies the reservation + style for RSVP. The reservation style can be set to 'Shared- + Explicit' (se) or 'Fixed-Filter' (ff)." + DEFVAL { se } + ::= { vRtrMplsLspEntry 28 } + +vRtrMplsLspRsvpAdspec OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "When the value of vRtrMplsLspRsvpAdspec is 'true', the ADSPEC + object will be included in RSVP messages. + When the value of vRtrMplsLspRsvpAdspec is 'false', the ADSPEC + object will not be included in RSVP messages." + DEFVAL { false } + ::= { vRtrMplsLspEntry 29 } + +vRtrMplsLspFRMethod OBJECT-TYPE + SYNTAX INTEGER { + oneToOneBackup(1), + facilityBackup(2) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The value of vRtrMplsLspFRMethod specifies the fast reroute + method used. + + In the 'One-to-one Backup' method, a backup LSP is established + which will intersect the original LSP somewhere downstream + of the point of link or node failure. For each LSP that is + backed up, a separate backup LSP is established. + + In the 'Facility Backup' method, instead of creating a separate + LSP for every LSP that is to be backed up, a single LSP is + created which serves as a backup for a set of LSPs. Such an LSP + tunnel is called a 'bypass tunnel'." + DEFVAL { oneToOneBackup } + ::= { vRtrMplsLspEntry 30 } + +vRtrMplsLspFRNodeProtect OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Setting the value of vRtrMplsLspFRNodeProtect to 'true' enables + node protection i.e. protection against the failure of a node on + the LSP. + + Setting the value to 'false' disables node protection." + DEFVAL { true } + ::= { vRtrMplsLspEntry 31 } + +vRtrMplsLspAdminGroupInclude OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The value of vRtrMplsLspAdminGroupInclude is a bit-map that + specifies a list of admin groups that should be included when + this LSP is setup. If bit 'n' is set, then the admin group + with value 'n' is included for this LSP. This implies that + each link that this LSP goes through must be associated with + at least one of the admin groups in the include list. + + By default, all admin groups are in the include list." + DEFVAL { '00000000'H } + ::= { vRtrMplsLspEntry 32 } + +vRtrMplsLspAdminGroupExclude OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The value of vRtrMplsLspAdminGroupExclude is a bit-map that + specifies a list of admin groups that should be excluded when + this LSP is setup. If bit 'n' is set, then the admin group + with value 'n' is excluded for this LSP. This implies that + each link that this LSP goes through must not be associated + with any of the admin groups in the exclude list. + + By default, no admin groups are in the exclude list." + DEFVAL { '00000000'H } + ::= { vRtrMplsLspEntry 33 } + +vRtrMplsLspAdaptive OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Setting the value of vRtrMplsLspAdaptive to 'true' enables + make-before-break functionality for the LSP. When the attributes + of an already established LSP are changed, either through manual + configuration or due to a change in network topology, + make-before-break functionality ensures that the resources of + the existing LSP will not be released until a new path (with the + same LSP Id) has been established and traffic flowing over the + existing path is seamlessly transferred to the new path. + + Setting the value to 'false' disables make-before-break + functionality." + DEFVAL { true } + ::= { vRtrMplsLspEntry 34 } + +vRtrMplsLspInheritance OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "For each writable object in this row that can be configured to + inherit its value from the corresponding object in the + vRtrMplsGeneralTable, there is bit within vRtrMplsLspInheritance + that controls whether to inherit the operational value of the + object or use the administratively set value. + + This object is a bit-mask, with the following positions: + + vRtrMplsLspOptimizeTimer 0x1 + vRtrMplsLspFRObject 0x2 + + When the bit for an object is set to one, then the object's + administrative and operational value are whatever the DEFVAL + or most recently SET value is. + + When the bit for an object is set to zero, then the object's + administrative and operational value are inherited from the + corresponding object in vRtrMplsGeneralTable." + DEFVAL { 0 } -- by default inherit everything from vRtrMplsGeneralTable + ::= { vRtrMplsLspEntry 35 } + +vRtrMplsLspOptimizeTimer OBJECT-TYPE + SYNTAX Unsigned32 (0..65535) + UNITS "seconds" + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The value of vRtrMplsLspOptimizeTimer specifies the time, in + seconds, the software will wait before attempting to re-optimize + the LSP. + + When CSPF is enabled, changes in the network topology may cause + the existing path of a loose-hop LSP to become sub-optimal. Such + LSPs can be re-optimized and re-routed through more optimal paths + by recalculating the path for the LSP at periodic intervals. This + interval is controlled by the optimize timer. + + A value of 0 indicates that optimization has been disabled. + + When the vRtrMplsLspOptimizeTimer bit in vRtrMplsLspInheritance + is cleared (0), the value returned in the GET request is inherited + from vRtrMplsGeneralOptimizeTimer." + DEFVAL { 0 } + ::= { vRtrMplsLspEntry 36 } + +vRtrMplsLspOperFastReroute OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of vRtrMplsLspOperFastReroute specifies whether the + operational LSP has fast reroute enabled or disabled. + + When make-before-break functionality for the LSP is enabled and + if the fast reroute setting is changed, the resources for the + existing LSP will not be released until a new path with the new + attribute settings has been established. While a new path is + being signaled, the administrative value and the operational + values of fast reroute setting for the LSP may differ. The value + of vRtrMplsLspFastReroute specifies the setting used for the new + LSP path trying to be established whereas the value of + vRtrMplsLspOperFastReroute specifies the setting for the existing + LSP path." + ::= { vRtrMplsLspEntry 37 } + +vRtrMplsLspFRObject OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The value of vRtrMplsLspFRObject specifies whether fast reroute, + for LSPs using 'Facility Backup', is signalled with or without + the fast reroute object. The value of vRtrMplsLspFRObject is + ignored if fast reroute is disabled for the LSP or if the LSP + is using 'One-to-one Backup'. + + When the vRtrMplsLspFRObject bit in vRtrMplsLspInheritance is + cleared (0), the value returned in the GET request is inherited + from vRtrMplsGeneralFRObject." + DEFVAL { true } + ::= { vRtrMplsLspEntry 38 } + +vRtrMplsLspHoldTimer OBJECT-TYPE + SYNTAX Unsigned32 (0..10) + UNITS "seconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of vRtrMplsLspHoldTimer specifies the time, in + seconds, for which the ingress node holds a bit before + programming its data plane and declaring the lsp up to + the service module. + + The value of vRtrMplsLspHoldTimer is inherited from + the value of vRtrMplsGeneralHoldTimer." + DEFVAL { 1 } + ::= { vRtrMplsLspEntry 39 } + +vRtrMplsLspCspfTeMetricEnabled OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The value of vRtrMplsLspCspfTeMetricEnabled specifies whether the TE + metric would be used for the purpose of the LSP path computation by CSPF. + When the value of this object is 'false', the IGP metric is used to + compute the path of the LSP by CSPF." + DEFVAL { false } + ::= { vRtrMplsLspEntry 40 } + +-- +-- The Virtual Router MPLS Labeled Switch Path (LSP) Statistics Table +-- +-- Augmentation of the vRtrMplsLspTable. +-- Use of AUGMENTS clause implies a one-to-one dependent relationship +-- between the base table, vRtrMplsLspTable, and the augmenting table, +-- vRtrMplsLspStatTable. This in effect extends the vRtrMplsLspTable +-- with additional columns. +-- Creation (or deletion) of a row in the vRtrMplsLspTable results in +-- the same fate for the row in the vRtrMplsLspStatTable. +-- + +vRtrMplsLspStatTable OBJECT-TYPE + SYNTAX SEQUENCE OF VRtrMplsLspStatEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The vRtrMplsLspStatTable has an entry for each Labeled Switch + Path (LSP) configured for a virtual router in the system." + ::= { tmnxMplsObjs 2 } + +vRtrMplsLspStatEntry OBJECT-TYPE + SYNTAX VRtrMplsLspStatEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Each row entry represents a collection of statistics for a + Labeled Switch Path (LSP) configured for a virtual router in + the system. + + Entries cannot be created and deleted via SNMP SET operations." + AUGMENTS { vRtrMplsLspEntry } + ::= { vRtrMplsLspStatTable 1 } + +VRtrMplsLspStatEntry ::= SEQUENCE { + vRtrMplsLspOctets Counter64, + vRtrMplsLspPackets Counter64, + vRtrMplsLspAge TimeInterval, + vRtrMplsLspTimeUp TimeInterval, + vRtrMplsLspTimeDown TimeInterval, + vRtrMplsLspPrimaryTimeUp TimeInterval, + vRtrMplsLspTransitions Counter32, + vRtrMplsLspLastTransition TimeInterval, + vRtrMplsLspPathChanges Counter32, + vRtrMplsLspLastPathChange TimeInterval, + vRtrMplsLspConfiguredPaths Integer32, + vRtrMplsLspStandbyPaths Integer32, + vRtrMplsLspOperationalPaths Integer32 +} + +vRtrMplsLspOctets OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of octets that have been forwarded over current + LSP active path. The number reported is not realtime, may + be subject to several minutes delay. The delay is controllable + by MPLS statistics gathering interval, which by default is + once every 5 minutes. If MPLS statistics gathering is not + enabled, this number will not increment." + ::= { vRtrMplsLspStatEntry 1 } + +vRtrMplsLspPackets OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of packets that have been forwarded over current + LSP active path. The number reported is not realtime, may + be subject to several minutes delay. The delay is controllable + by MPLS statistics gathering interval, which by default is + once every 5 minutes. If MPLS statistics gathering is not + enabled, this number will not increment." + ::= { vRtrMplsLspStatEntry 2 } + +vRtrMplsLspAge OBJECT-TYPE + SYNTAX TimeInterval + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The age (i.e., time from creation till now) of this LSP in + 10-millisecond periods." + ::= { vRtrMplsLspStatEntry 3 } + +vRtrMplsLspTimeUp OBJECT-TYPE + SYNTAX TimeInterval + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total time in 10-millisecond units that this LSP has been + been operational. For example, the percentage up time can be + determined by computing (vRtrMplsLspTimeUp/vRtrMplsLspAge * 100 %)." + ::= { vRtrMplsLspStatEntry 4 } + +vRtrMplsLspTimeDown OBJECT-TYPE + SYNTAX TimeInterval + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total time in 10-millisecond units that this LSP has not + been operational." + ::= { vRtrMplsLspStatEntry 5 } + +vRtrMplsLspPrimaryTimeUp OBJECT-TYPE + SYNTAX TimeInterval + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total time in 10-millisecond units that this LSP's primary + path has been operational. For example, the percentage + contribution of the primary path to the operational time is + given by (vRtrMplsLspPrimaryTimeUp/vRtrMplsLspTimeUp * 100) %." + ::= { vRtrMplsLspStatEntry 6 } + +vRtrMplsLspTransitions OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of state transitions (up -> down and down -> up) + this LSP has undergone." + ::= { vRtrMplsLspStatEntry 7 } + +vRtrMplsLspLastTransition OBJECT-TYPE + SYNTAX TimeInterval + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The time in 10-millisecond units since the last transition + occurred on this LSP." + ::= { vRtrMplsLspStatEntry 8 } + +vRtrMplsLspPathChanges OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of path changes this LSP has had. For every path + change (path down, path up, path change), a corresponding + syslog/trap (if enabled) is generated for it." + ::= { vRtrMplsLspStatEntry 9 } + +vRtrMplsLspLastPathChange OBJECT-TYPE + SYNTAX TimeInterval + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The time in 10-millisecond units since the last change + occurred on this LSP." + ::= { vRtrMplsLspStatEntry 10 } + +vRtrMplsLspConfiguredPaths OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of paths configured for this LSP." + ::= { vRtrMplsLspStatEntry 11 } + +vRtrMplsLspStandbyPaths OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of standby paths configured for this LSP." + ::= { vRtrMplsLspStatEntry 12 } + +vRtrMplsLspOperationalPaths OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of operational paths for this LSP. This includes + the path currently active, as well as operational standby + paths." + ::= { vRtrMplsLspStatEntry 13 } + + +-- +-- Virtual Router MPLS LSP to Path Mapping Table +-- + +vRtrMplsLspPathTableSpinlock OBJECT-TYPE + SYNTAX TestAndIncr + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "voluntary serialization control for vRtrMplsLspPathTable. + Primarily used by SNMP manager to coordinate changes to + vRtrMplsLspPathInheritance." + DEFVAL { 0 } + ::= { tmnxMplsObjs 3 } + +vRtrMplsLspPathTable OBJECT-TYPE + SYNTAX SEQUENCE OF VRtrMplsLspPathEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The vRtrMplsLspPathTable provides an association between an + LSP and a path. An LSP can have more than one path association, + but only one of those paths can be specified as the primary + path type. Paths are defined in as Tunnel entries in the + mplsTunnelTable in the MPLS-TE-MIB." + ::= { tmnxMplsObjs 4 } + +vRtrMplsLspPathEntry OBJECT-TYPE + SYNTAX VRtrMplsLspPathEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Each row entry represents an association between a Labeled Switch + Path (LSP) in the vRtrMplsLspTable and a path (or tunnel) entry in + the mplsTunnelTable. Entries in this table can be created and + deleted via SNMP SET operations. Setting RowStatus to 'active' + requires vRtrMplsLspPathType to have been assigned a valid value." + INDEX { vRtrID, vRtrMplsLspIndex, mplsTunnelIndex, mplsTunnelInstance, + mplsTunnelIngressLSRId } + ::= { vRtrMplsLspPathTable 1 } + +VRtrMplsLspPathEntry ::= SEQUENCE { + vRtrMplsLspPathRowStatus RowStatus, + vRtrMplsLspPathLastChange TimeStamp, + vRtrMplsLspPathType INTEGER, + vRtrMplsLspPathCos INTEGER, + vRtrMplsLspPathProperties BITS, + vRtrMplsLspPathBandwidth Integer32, + vRtrMplsLspPathBwProtect TruthValue, + vRtrMplsLspPathState INTEGER, + vRtrMplsLspPathPreference INTEGER, + vRtrMplsLspPathCosSource TruthValue, + vRtrMplsLspPathClassOfService TNamedItemOrEmpty, + vRtrMplsLspPathSetupPriority Unsigned32, + vRtrMplsLspPathHoldPriority Unsigned32, + vRtrMplsLspPathRecord INTEGER, + vRtrMplsLspPathHopLimit Unsigned32, + vRtrMplsLspPathSharing TruthValue, + vRtrMplsLspPathAdminState TmnxAdminState, + vRtrMplsLspPathOperState TmnxOperState, + vRtrMplsLspPathInheritance Unsigned32, + vRtrMplsLspPathLspId MplsLSPID, + vRtrMplsLspPathRetryTimeRemaining Unsigned32, + vRtrMplsLspPathTunnelARHopListIndex Integer32, + vRtrMplsLspPathNegotiatedMTU Unsigned32, + vRtrMplsLspPathFailCode TmnxMplsLspFailCode, + vRtrMplsLspPathFailNodeAddr IpAddress, + vRtrMplsLspPathAdminGroupInclude Unsigned32, + vRtrMplsLspPathAdminGroupExclude Unsigned32, + vRtrMplsLspPathAdaptive TruthValue, + vRtrMplsLspPathOptimizeTimer Unsigned32, + vRtrMplsLspPathNextOptimize Unsigned32, + vRtrMplsLspPathOperBandwidth Integer32, + vRtrMplsLspPathMBBState INTEGER, + vRtrMplsLspPathResignal TmnxActionType, + vRtrMplsLspPathTunnelCRHopListIndex Integer32, + vRtrMplsLspPathOperMTU Unsigned32, + vRtrMplsLspPathRecordLabel INTEGER +} + +vRtrMplsLspPathRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The row status used for creation, deletion, or control + of vRtrMplsLspPathTable entries. Before the row can be + placed into the 'active' state vRtrMplsLspPathType must + have been assigned a valid value." + ::= { vRtrMplsLspPathEntry 1 } + +vRtrMplsLspPathLastChange OBJECT-TYPE + SYNTAX TimeStamp + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The sysUpTime when this row was last modified." + ::= { vRtrMplsLspPathEntry 2 } + +vRtrMplsLspPathType OBJECT-TYPE + SYNTAX INTEGER { + other (1), + primary (2), + standby (3), + secondary (4) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This variable is an enum that represents the role this + path is taking within this LSP." + ::= { vRtrMplsLspPathEntry 3 } + +vRtrMplsLspPathCos OBJECT-TYPE + SYNTAX INTEGER (0..7 | 255) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The configured Class Of Service (COS) for this path. If + the value is between 0 and 7 inclusive, this value + will be inserted in the 3 bit COS field in the label. + If the value is 255, the value in the COS field of + the label will depend on other factors." + DEFVAL { 255 } + ::= { vRtrMplsLspPathEntry 4 } + +vRtrMplsLspPathProperties OBJECT-TYPE + SYNTAX BITS { + record-route (0), + adaptive (1), + cspf (2), + mergeable (3), + fast-reroute (4) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The set of configured properties for this path expressed + as a bit map. For example, if the path is an adaptive + path, the bit corresponding to bit value 1 is set." + ::= { vRtrMplsLspPathEntry 5 } + +vRtrMplsLspPathBandwidth OBJECT-TYPE + SYNTAX Integer32 + UNITS "mega-bits per second" + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The value of vRtrMplsLspPathBandwidth specifies the amount + of bandwidth in mega-bits per seconds (Mbps) to be reserved + for this LSP path. A value of zero (0) indicates that no + bandwidth is reserved." + DEFVAL { 0 } + ::= { vRtrMplsLspPathEntry 6 } + +vRtrMplsLspPathBwProtect OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "When vRtrMplsLspPathBwProtect has a value of 'true', bandwidth + protection is enabled on a LSP. LSPs that reserve bandwidth + will be used for EF services where customers need guaranteed + bandwidth. It is expected that multiple EF services will be + assigned to a single LSP. When bandwidth protection is + enabled on an LSP, each time this LSP is used for a certain + service the bandwidth allocated on that service is deducted + from the bandwidth reserved for the LSP. Once the bandwidth is + exhausted on the LSP, the ESR will provide feedback to the + provider indicating that this LSP has exhausted its resources." + DEFVAL { false } + ::= { vRtrMplsLspPathEntry 7 } + +vRtrMplsLspPathState OBJECT-TYPE + SYNTAX INTEGER { + unknown (1), + active (2), + inactive (3) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The current working state of this path within this LSP." + DEFVAL { unknown } + ::= { vRtrMplsLspPathEntry 8 } + +vRtrMplsLspPathPreference OBJECT-TYPE + SYNTAX INTEGER (1..255) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "When there is no path in the LSP with vRtrMplsLspPathType + value of 'primary', 'secondary' type paths of this LSP + with the same value of vRtrMplsLspPathPreference are used + for load sharing. When a 'primary' type path exists in + the LSP, vRtrMplsLspPathPreference is used to denote at + which priority one 'secondary' path will supercede another + when the 'primary' fails. 1 indicates the highest priority + value. + + When the vRtrMplsLspPathPreference bit in + vRtrMplsLspPathInheritance is cleared (0), the value returned + to a GET request is inherited from vRtrMplsLspPreference." + DEFVAL { 7 } + ::= { vRtrMplsLspPathEntry 9 } + +vRtrMplsLspPathCosSource OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "When vRtrMplsLspPathCosSource is set to 'true', the value of + vRtrMplsLspPathClassOfService overrides vRtrMplsLspClassOfService. + When 'false', the value of vRtrMplsLspClassOfService is used." + DEFVAL { false } + ::= { vRtrMplsLspPathEntry 10 } + +vRtrMplsLspPathClassOfService OBJECT-TYPE + SYNTAX TNamedItemOrEmpty + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The name of the class of service value to be assigned to all + packets on the LSP is specified with vRtrMplsLspPathClassOfService. + The EXP bits in the MPLS header are set based on the global + mapping table that specified the mapping between the forwarding + class and the EXP bits. When class of service is specified, + all packets will be marked with the same EXP bits that match + the vRtrMplsLspPathClassOfService name in the mapping table. + + An empty string, ''H, specifies no class of service. Packets + are assigned EXP bits based on the same mapping table, however + each packet is marked with EXP bits based on the forwarding + class from which it is serviced." + DEFVAL { ''H } + ::= { vRtrMplsLspPathEntry 11 } + +vRtrMplsLspPathSetupPriority OBJECT-TYPE + SYNTAX Unsigned32 (0..7) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The value of vRtrMplsLspPathSetupPriority specifies the setup + priority to use when insufficient bandwidth is available to setup + a LSP. The setup priority is compared against the hold priority of + existing LSPs. If the setup priority is higher than the hold + priority of the established LSPs, this LSP may preempt the other + LSPs. A value of zero (0) is the highest priority and a value + of seven (7) is the lowest priority. + + When the vRtrMplsLspPathHopLimit bit in vRtrMplsLspPathInheritance + is cleared (0), the value returned to a GET request is inherited + from vRtrMplsLspHopLimit." + DEFVAL { 7 } + ::= { vRtrMplsLspPathEntry 12 } + +vRtrMplsLspPathHoldPriority OBJECT-TYPE + SYNTAX Unsigned32 (0..7) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The value of vRtrMplsLspPathHoldPriority specifies the hold + priority to use when insufficient bandwidth is available to setup + a LSP. The setup priority is compared against the hold priority of + existing LSPs. If the setup priority is higher than the hold + priority of the established LSPs, this LSP may preempt the other + LSPs. A value of zero (0) is the highest priority and a value + of seven (7) is the lowest priority. + + When the vRtrMplsLspPathHopLimit bit in vRtrMplsLspPathInheritance + is cleared (0), the value returned to a GET request is inherited + from vRtrMplsLspHopLimit." + DEFVAL { 0 } + ::= { vRtrMplsLspPathEntry 13 } + +vRtrMplsLspPathRecord OBJECT-TYPE + SYNTAX INTEGER { + record (1), + noRecord (2) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "When the value of vRtrMplsLspPathRecord is 'record', recording of + all the hops that a LSP traverses is enabled. + + When the value of vRtrMplsLspPathRecord is 'noRecord', recording + of all the hops that a LSP traverses is disabled." + DEFVAL { record } + ::= { vRtrMplsLspPathEntry 14 } + +vRtrMplsLspPathHopLimit OBJECT-TYPE + SYNTAX Unsigned32 (2..255) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The value of vRtrMplsLspPathHopLimit specifies the maximum number + of hops that a LSP will traverse including the ingress and + egress ESRs. A LSP will not be setup if the hop limit is + exceeded. + + When the vRtrMplsLspPathHopLimit bit in vRtrMplsLspPathInheritance + is cleared (0), the value returned to a GET request is inherited + from vRtrMplsLspHopLimit." + DEFVAL { 255 } + ::= { vRtrMplsLspPathEntry 15 } + +vRtrMplsLspPathSharing OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "When vRtrMplsLspPathSharing has a value of 'true', path-sharing + is enabled for the secondary path. Path-sharing is used to + control the hops of the secondary path. + + When vRtrMplsLspPathSharing have a value of 'false', CSPF attempts + to find a path for the secondary that does not include any node + or link that is common to the active primary path. + + This variable is valid only if vRtrMplsLspPathType is set to + 'secondary'." + DEFVAL { false } + ::= { vRtrMplsLspPathEntry 16 } + +vRtrMplsLspPathAdminState OBJECT-TYPE + SYNTAX TmnxAdminState + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The desired administrative state for this LSP path." + DEFVAL { inService } + ::= { vRtrMplsLspPathEntry 17 } + +vRtrMplsLspPathOperState OBJECT-TYPE + SYNTAX TmnxOperState + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The current operational state of this LSP path." + ::= { vRtrMplsLspPathEntry 18 } + +vRtrMplsLspPathInheritance OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "For each writable object in this row that can be configured to + inherit its value from its corresponding object in the + vRtrMplsLspTable, controls whether to inherit the operational value + of that object, or use the administratively set value. + + This object is a bit-mask, with the following positions: + + vRtrMplsLspPathBandwidth 0x10 + vRtrMplsLspPathPreference 0x80 + vRtrMplsLspPathSetupPriority 0x400 + vRtrMplsLspPathHoldPriority 0x800 + vRtrMplsLspPathHopLimit 0x2000 + vRtrMplsLspPathAdminGroupInclude 0x20000 + vRtrMplsLspPathAdminGroupExclude 0x40000 + vRtrMplsLspPathAdaptive 0x80000 + vRtrMplsLspPathOptimizeTimer 0x100000 + + When the bit for an object is set to one, then the + object's administrative and operational value are whatever + the DEFVAL or most recently SET value is. + + When the bit for an object is set to zero, then the + object's administrative and operational value are inherited + from the corresponding object in vRtrMplsLspTable." + DEFVAL { 0 } -- by default inherit everything from vRtrMplsLspTable + ::= { vRtrMplsLspPathEntry 19 } + +vRtrMplsLspPathLspId OBJECT-TYPE + SYNTAX MplsLSPID + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This value identifies the label switched path that + is signaled for this entry." + ::= { vRtrMplsLspPathEntry 20 } + +vRtrMplsLspPathRetryTimeRemaining OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The time in 10-millisecond units to signal this path." + ::= { vRtrMplsLspPathEntry 21 } + +vRtrMplsLspPathTunnelARHopListIndex OBJECT-TYPE + SYNTAX Integer32 (0|1..2147483647) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Primary index into the mplsTunnelARHopTable identifying a + particular recorded hop list. A value of 0 implies that there + is no recored hop list associated with this LSP path." + ::= { vRtrMplsLspPathEntry 22 } + +vRtrMplsLspPathNegotiatedMTU OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of vRtrMplsLspPathNegotiatedMTU specifies the size + for the Maximum transmission unit (MTU) that is negotiated + during establishment of this LSP Path." + DEFVAL { 0 } + ::= { vRtrMplsLspPathEntry 23 } + +vRtrMplsLspPathFailCode OBJECT-TYPE + SYNTAX TmnxMplsLspFailCode + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of vRtrMplsLspPathFailCode specifies the reason code + for LSP Path failure. A value of 0 indicates that no failure + has occurred." + ::= { vRtrMplsLspPathEntry 24 } + +vRtrMplsLspPathFailNodeAddr OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of vRtrMplsLspPathFailNodeAddr specifies the IP address + of the node in the LSP path at which the LSP path failed. When + no failure has occurred, this value is 0." + ::= { vRtrMplsLspPathEntry 25 } + +vRtrMplsLspPathAdminGroupInclude OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The value of vRtrMplsLspPathAdminGroupInclude is a bit-map that + specifies a list of admin groups that should be included when + this LSP path is setup. If bit 'n' is set, then the admin group + with value 'n' is included for this LSP path. This implies that + each link that this LSP path goes through must be associated with + at least one of the admin groups in the include list. + + When the vRtrMplsLspPathAdminGroupInclude bit in + vRtrMplsLspPathInheritance is cleared (0), the value returned + to a GET request is inherited from vRtrMplsLspAdminGroupInclude." + DEFVAL { '00000000'H } + ::= { vRtrMplsLspPathEntry 26 } + +vRtrMplsLspPathAdminGroupExclude OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The value of vRtrMplsLspPathAdminGroupExclude is a bit-map that + specifies a list of admin groups that should be excluded when + this LSP path is setup. If bit 'n' is set, then the admin group + with value 'n' is excluded for this LSP path. This implies that + each link that this LSP path goes through must not be associated + with any of the admin groups in the exclude list. + + When the vRtrMplsLspPathAdminGroupExclude bit in + vRtrMplsLspPathInheritance is cleared (0), the value returned + to a GET request is inherited from vRtrMplsLspAdminGroupExclude." + DEFVAL { '00000000'H } + ::= { vRtrMplsLspPathEntry 27 } + +vRtrMplsLspPathAdaptive OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Setting the value of vRtrMplsLspPathAdaptive to 'true', enables + make-before-break functionality for the LSP path. + + Setting the value to 'false', disables make-before-break + functionality for the path. + + When the vRtrMplsLspPathAdaptive bit in vRtrMplsLspPathInheritance + is cleared (0), the value returned to a GET request is inherited + from vRtrMplsLspAdaptive." + DEFVAL { true } + ::= { vRtrMplsLspPathEntry 28 } + +vRtrMplsLspPathOptimizeTimer OBJECT-TYPE + SYNTAX Unsigned32 (0..65535) + UNITS "seconds" + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The value of vRtrMplsLspPathOptimizeTimer specifies the time, in + seconds, the software will wait before attempting to re-optimize + the LSP path. + + When CSPF is enabled, changes in the network topology may cause + the existing path of a loose-hop LSP to become sub-optimal. Such + LSPs can be re-optimized and re-routed through more optimal paths + by recalculating the path for the LSP at periodic intervals. This + interval is controlled by the optimize timer. + + A value of 0 indicates that optimization has been disabled. + + When the vRtrMplsLspPathOptimizeTimer bit in + vRtrMplsLspPathInheritance is cleared (0), the value returned in + the GET request is inherited from vRtrMplsLspOptimizeTimer." + DEFVAL { 0 } + ::= { vRtrMplsLspPathEntry 29 } + +vRtrMplsLspPathNextOptimize OBJECT-TYPE + SYNTAX Unsigned32 (0..65535) + UNITS "seconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of vRtrMplsLspPathNextOptimize specifies the current value + of the optimize timer. This is the time, in seconds, remaining till + the optimize timer will expire and optimization will be started for + the LSP path." + ::= { vRtrMplsLspPathEntry 30 } + +vRtrMplsLspPathOperBandwidth OBJECT-TYPE + SYNTAX Integer32 + UNITS "mega-bits per second" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of vRtrMplsLspPathOperBandwidth specifies the amount of + bandwidth in mega-bits per seconds (Mbps) that has been reserved + for the operational LSP path. + + When make-before-break functionality for the LSP is enabled and + if the path bandwidth is changed, the resources allocated to the + existing LSP paths will not be released until a new path with + the new bandwidth settings has been established. While a new path + is being signaled, the administrative value and the operational + values of the path bandwidth may differ. The value of + vRtrMplsLspPathBandwidth specifies the bandwidth requirements for + the new LSP path trying to be established whereas the value of + vRtrMplsLspPathOperBandwidth specifies the bandwidth reserved + for the existing LSP path." + ::= { vRtrMplsLspPathEntry 31 } + +vRtrMplsLspPathMBBState OBJECT-TYPE + SYNTAX INTEGER { + none (1), + success (2), + inProgress (3), + fail (4) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of vRtrMplsLspPathMBBState specifies the state of the + most recent invocation of the make-before-break functionality. + + Possible states are: + + none (1) - no make-before-break invoked + success (2) - make-before-break successful + inProgress (3) - make-before-break in progress + fail (4) - make-before-break failed." + ::= { vRtrMplsLspPathEntry 32 } + +vRtrMplsLspPathResignal OBJECT-TYPE + SYNTAX TmnxActionType + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Setting the value of vRtrMplsLspPathResignal to 'doAction' triggers + the re-signaling of the LSP path. + + If the LSP path is operationally down either due to network failure + or due to the retry attempts count being exceeded, setting this + variable to 'doAction' will initiate the signaling for the path. A + make-before-break signaling for the path will be initiated if the + LSP is operationally up but the make-before-break retry attempts + count was exceeded. Make-before-break signaling will also be + initiated for any LSP that is operationally up. This may be used + to cause a loose-hop LSP to be optimized. + + If a re-signal is triggered while a re-signaling is already in + progress, the old transient state will be destroyed and a new + transaction being triggered. + + An SNMP GET request on this object should return 'notApplicable'." + ::= { vRtrMplsLspPathEntry 33 } + +vRtrMplsLspPathTunnelCRHopListIndex OBJECT-TYPE + SYNTAX Integer32 (0|1..2147483647) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Primary index into the vRtrMplsTunnelCHopTable identifying a + particular computed hop list. A value of 0 implies that there + is no computed hop list associated with this LSP path." + ::= { vRtrMplsLspPathEntry 34 } + +vRtrMplsLspPathOperMTU OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of vRtrMplsLspPathOperMTU specifies the size + for the Maximum transmission unit (MTU) that is currently + operation for this LSP Path." + ::= { vRtrMplsLspPathEntry 35 } + +vRtrMplsLspPathRecordLabel OBJECT-TYPE + SYNTAX INTEGER { + record (1), + noRecord (2) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "When the value of vRtrMplsLspPathRecordLabel is 'record', + recording of labels at each node that a LSP traverses is + enabled. + + When the value of vRtrMplsLspPathRecordLabel is 'noRecord', + recording of labels at each node that a LSP traverses is + disabled." + DEFVAL { record } + ::= { vRtrMplsLspPathEntry 36 } + +-- +-- The Virtual Router MPLS LSP Path Statistics Table +-- +-- Augmentation of the vRtrMplsLspPathTable. +-- Use of AUGMENTS clause implies a one-to-one dependent relationship +-- between the base table, vRtrMplsLspPathTable, and the augmenting table, +-- vRtrMplsLspPathStatTable. This in effect extends the vRtrMplsLspPathTable +-- with additional columns. +-- Creation (or deletion) of a row in the vRtrMplsLspPathTable results in +-- the same fate for the row in the vRtrMplsLspPathStatTable. +-- + +vRtrMplsLspPathStatTable OBJECT-TYPE + SYNTAX SEQUENCE OF VRtrMplsLspPathStatEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The vRtrMplsLspPathStatTable has an entry for an association + between a Labeled Switch Path (LSP) in the vRtrMplsLspTable + and a path (or tunnel) entry in the mplsTunnelTable." + ::= { tmnxMplsObjs 5 } + +vRtrMplsLspPathStatEntry OBJECT-TYPE + SYNTAX VRtrMplsLspPathStatEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Each row entry represents a collection of statistics for + an association between a Labeled Switch Path (LSP) in the + vRtrMplsLspTable and a path (or tunnel) entry in the + mplsTunnelTable. + + Entries cannot be created and deleted via SNMP SET operations." + AUGMENTS { vRtrMplsLspPathEntry } + ::= { vRtrMplsLspPathStatTable 1 } + +VRtrMplsLspPathStatEntry ::= SEQUENCE { + vRtrMplsLspPathTimeUp TimeInterval, + vRtrMplsLspPathTimeDown TimeInterval, + vRtrMplsLspPathRetryAttempts Unsigned32, + vRtrMplsLspPathTransitionCount Counter32, + vRtrMplsLspPathCspfQueries Counter32 +} + +vRtrMplsLspPathTimeUp OBJECT-TYPE + SYNTAX TimeInterval + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total time in 10-millisecond units that this LSP path has + been operational. For example, the percentage up time can be + determined by computing (vRtrMplsLspPathTimeUp/vRtrMplsLspAge * 100 %)." + ::= { vRtrMplsLspPathStatEntry 1 } + +vRtrMplsLspPathTimeDown OBJECT-TYPE + SYNTAX TimeInterval + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total time in 10-millisecond units that this LSP Path has + not been operational." + ::= { vRtrMplsLspPathStatEntry 2 } + +vRtrMplsLspPathRetryAttempts OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of unsuccessful attempts which have been made to + signal this path. As soon as the path gets signalled, this is + set to 0." + ::= { vRtrMplsLspPathStatEntry 3 } + +vRtrMplsLspPathTransitionCount OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The object vRtrMplsLspPathTransitionCount maintains the number + of transitions that have occurred for this LSP." + ::= { vRtrMplsLspPathStatEntry 4 } + +vRtrMplsLspPathCspfQueries OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of vRtrMplsLspPathCspfQueries specifies the number + of CSPF queries that have been made for this LSP path." + ::= { vRtrMplsLspPathStatEntry 5 } + + +-- +-- Virtual Router MPLS LSP to Cross-connect Mapping Table +-- + +vRtrMplsXCTable OBJECT-TYPE + SYNTAX SEQUENCE OF VRtrMplsXCEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table has an entry for each mplsXCEntry + in the mplsXCTable. It serves as an another + indirect index to the mplsXCTable." + ::= { tmnxMplsObjs 6 } + +vRtrMplsXCEntry OBJECT-TYPE + SYNTAX VRtrMplsXCEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in this table represents the indices + to be used to search the mplsXCTable." + INDEX { mplsXCLspId } + + ::= { vRtrMplsXCTable 1 } + +VRtrMplsXCEntry ::= SEQUENCE { + vRtrMplsXCIndex Integer32, + vRtrMplsInSegmentIfIndex InterfaceIndexOrZero, + vRtrMplsInSegmentLabel MplsLabel, + vRtrMplsOutSegmentIndex Integer32, + vRtrMplsERHopTunnelIndex Integer32, + vRtrMplsARHopTunnelIndex Integer32, + vRtrMplsRsvpSessionIndex Unsigned32, + vRtrMplsXCFailCode TmnxMplsLspFailCode, + vRtrMplsXCCHopTableIndex Integer32 +} + +vRtrMplsXCIndex OBJECT-TYPE + SYNTAX Integer32 (1..2147483647) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "An index of the mplsXCTable. It represents + mplsXCIndex, a field of the mplsXCTable." + ::= { vRtrMplsXCEntry 1 } + +vRtrMplsInSegmentIfIndex OBJECT-TYPE + SYNTAX InterfaceIndexOrZero + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "An index of the mplsXCTable. It represents + mplsInSegmentIfIndex of the mplsInSegmentTable." + ::= { vRtrMplsXCEntry 2 } + +vRtrMplsInSegmentLabel OBJECT-TYPE + SYNTAX MplsLabel + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "An index of the mplsXCTable. It represents + mplsInSegmentLabel of the mplsInSegmentTable." + ::= { vRtrMplsXCEntry 3 } + +vRtrMplsOutSegmentIndex OBJECT-TYPE + SYNTAX Integer32 (0..2147483647) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "An index of the mplsXCTable. It represents + mplsOutSegmentIndex of the mplsOutSegmentTable." + ::= { vRtrMplsXCEntry 4 } + +vRtrMplsERHopTunnelIndex OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Primary index into the mplsTunnelHopTable identifying a particular + recorded hop list (stores ERO in LSR)." + ::= { vRtrMplsXCEntry 5 } + +vRtrMplsARHopTunnelIndex OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Primary index into the mplsTunnelARHopTable identifying a particular + recorded hop list (stores RRO in LSR)." + ::= { vRtrMplsXCEntry 6 } + +vRtrMplsRsvpSessionIndex OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "An index into the vRtrRsvpSessionTable identifying a particular RSVP + session." + ::= { vRtrMplsXCEntry 7 } + +vRtrMplsXCFailCode OBJECT-TYPE + SYNTAX TmnxMplsLspFailCode + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of vRtrMplsXCFailCode specifies the reason code for + cross-connect failure. A value of 0 indicates that no failure + occurred." + ::= { vRtrMplsXCEntry 8 } + +vRtrMplsXCCHopTableIndex OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Index to the vRtrMplsTunnelCHopTable entries that specify + the hops for the CSPF path for a detour LSP for this tunnel." + ::= { vRtrMplsXCEntry 9 } + + +-- +-- Virtual Router MPLS General Table +-- + +vRtrMplsGeneralTable OBJECT-TYPE + SYNTAX SEQUENCE OF VRtrMplsGeneralEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The vRtrMplsGeneralTable contains objects for general control and + management of an MPLS protocol instance within a virtual router." + ::= { tmnxMplsObjs 7 } + +vRtrMplsGeneralEntry OBJECT-TYPE + SYNTAX VRtrMplsGeneralEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Each row entry represents an instance of the MPLS protocol running + within a virtual router. Entries in this table cannot be + created and deleted via SNMP SET operations. An entry in this table + is created by the agent when vRtrMplsStatus in the vRtrConfTable is + set to 'create'. The entry is destroyed when vRtrMplsStatus is set + to 'delete'" + INDEX { vRtrID } + ::= { vRtrMplsGeneralTable 1 } + +VRtrMplsGeneralEntry ::= SEQUENCE { + vRtrMplsGeneralLastChange TimeStamp, + vRtrMplsGeneralAdminState TmnxAdminState, + vRtrMplsGeneralOperState TmnxOperState, + vRtrMplsGeneralPropagateTtl TruthValue, + vRtrMplsGeneralTE INTEGER, + vRtrMplsGeneralNewLspIndex TestAndIncr, + vRtrMplsGeneralOptimizeTimer Unsigned32, + vRtrMplsGeneralFRObject TruthValue, + vRtrMplsGeneralResignalTimer Unsigned32, + vRtrMplsGeneralHoldTimer Unsigned32, + vRtrMplsGeneralDynamicBypass TruthValue, + vRtrMplsGeneralNextResignal Unsigned32, + vRtrMplsGeneralOperDownReason TmnxMplsOperDownReasonCode, + vRtrMplsGeneralSrlgFrr TruthValue, + vRtrMplsGeneralSrlgFrrStrict TruthValue +} + +vRtrMplsGeneralLastChange OBJECT-TYPE + SYNTAX TimeStamp + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The sysUpTime when this row was last modified." + ::= { vRtrMplsGeneralEntry 1 } + +vRtrMplsGeneralAdminState OBJECT-TYPE + SYNTAX TmnxAdminState + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "When vRtrMplsGeneralAdminState is set to 'inService', the agent + attempts to enable the MPLS protocol instance on this router. + + When vRtrMplsGeneralAdminState is set to 'outOfService', the + agent attempts to disable the MPLS protocol instance on this + router." + DEFVAL { inService } + ::= { vRtrMplsGeneralEntry 2 } + +vRtrMplsGeneralOperState OBJECT-TYPE + SYNTAX TmnxOperState + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "vRtrMplsGeneralOperState indicates the current operating state + of this MPLS protocol instance on this router." + ::= { vRtrMplsGeneralEntry 3 } + +vRtrMplsGeneralPropagateTtl OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "When vRtrMplsGeneralPropagateTtl is set to 'true', for all LSPs, + the ingress ESR writes the TTL of the IP packet in the label and + each transit ESR decrements the TTL in the label. At the egress + ESR the TTL value from the label is written into the IP packet. + + When vRtrMplsGeneralPropagateTtl is set to 'false', the ingress + ESR ignores the IP packet TTl and writes the value of 255 into + the label, while the egress ESR does not write the label TTL + into the IP packet. This assumes that all ESRs have been + configured to have vRtrMplsGeneralPropagateTtl set to 'false', + or this may result in unpredictable behavior." + DEFVAL { true } + ::= { vRtrMplsGeneralEntry 4 } + +vRtrMplsGeneralTE OBJECT-TYPE + SYNTAX INTEGER { + none (1), + bgp (2), + bgpigp (3) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The value of vRtrMplsGeneralTE specifies the type of traffic + engineering used with this MPLS instance." + DEFVAL { none } + ::= { vRtrMplsGeneralEntry 5 } + +vRtrMplsGeneralNewLspIndex OBJECT-TYPE + SYNTAX TestAndIncr + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object is used to assign values to vRtrMplsLspIndex as + described in 'Textual Conventions for SNMPv2'. The network + manager reads the object, and then writes the value back + in the SET request that creates a new instance of + vRtrMplsLspEntry. If the SET fails with the code + 'inconsistentValue', then the process must be repeated. + If the the SET succeeds, then the object is incremented + and the new instance is created according to the manager's + directions." + ::= { vRtrMplsGeneralEntry 6 } + +vRtrMplsGeneralOptimizeTimer OBJECT-TYPE + SYNTAX Unsigned32 (0..65535) + UNITS "seconds" + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The value of vRtrMplsGeneralOptimizeTimer specifies the time, in + seconds, the software will wait before attempting to re-optimize + the LSPs. + + When CSPF is enabled, changes in the network topology may cause + the existing path of a loose-hop LSP to become sub-optimal. Such + LSPs can be re-optimized and re-routed through more optimal paths + by recalculating the path for the LSP at periodic intervals. This + interval is controlled by the optimize timer. + + A value of 0 indicates that optimization has been disabled. + + The value for vRtrMplsGeneralOptimizeTimer is by default inherited + by all LSPs and their paths." + DEFVAL { 0 } + ::= { vRtrMplsGeneralEntry 7 } + +vRtrMplsGeneralFRObject OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The value of vRtrMplsGeneralFRObject specifies whether fast reroute, + for LSPs using 'Facility Backup', is signalled with or without the + fast reroute object. The value of vRtrMplsGeneralFRObject is ignored + if fast reroute is disabled for the LSP or if the LSP is using + 'One-to-one Backup'. + + The value for vRtrMplsGeneralFRObject is by default inherited by + all LSPs." + DEFVAL { true } + ::= { vRtrMplsGeneralEntry 8 } + +vRtrMplsGeneralResignalTimer OBJECT-TYPE + SYNTAX Unsigned32 (0|30..10080) + UNITS "minutes" + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The value of vRtrMplsGeneralResignalTimer specifies the value + for the LSP resignal timer, that is the time, in minutes, the + software will wait before attempting to resignal the LSPs. + + When the resignal timer expires, if the new recorded hop list + (RRO) for an LSP has a better metric than the current recorded + hop list, an attempt will be made to resignal that LSP using + the make-before-break mechanism. If the attempt to resignal + an LSP fails, the LSP will continue to use the existing path + and a resignal will be attempted the next time the timer expires. + + A value of 0 for the resignal timer indicates that timer-based + LSP resignalling has been disabled." + DEFVAL { 0 } + ::= { vRtrMplsGeneralEntry 9 } + +vRtrMplsGeneralHoldTimer OBJECT-TYPE + SYNTAX Unsigned32 (0..10) + UNITS "seconds" + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The value of vRtrMplsGeneralHoldTimer specifies the time, in + seconds, for which the ingress node holds a bit before + programming its data plane and declaring the lsp up to + the service module. + + A value of 0 indicates that the hold timer has been disabled." + DEFVAL { 1 } + ::= { vRtrMplsGeneralEntry 10 } + +vRtrMplsGeneralDynamicBypass OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The value of vRtrMplsGeneralDynamicBypass specifies whether + dynamic bypass tunnels are enabled. + + By default, dynamic bypass tunnels are enabled." + DEFVAL { true } + ::= { vRtrMplsGeneralEntry 11 } + +vRtrMplsGeneralNextResignal OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of vRtrMplsGeneralNextResignal indicates the time + remaining, in minutes, for the vRtrMplsGeneralResignalTimer to expire." + ::= { vRtrMplsGeneralEntry 12 } + +vRtrMplsGeneralOperDownReason OBJECT-TYPE + SYNTAX TmnxMplsOperDownReasonCode + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of vRtrMplsGeneralOperDownReason indicates the reason + due to which the MPLS instance is operationally down." + ::= { vRtrMplsGeneralEntry 13 } + +vRtrMplsGeneralSrlgFrr OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The value of vRtrMplsGeneralSrlgFrr specifies whether Shared Risk + Link Group (SRLG) constraint will be used in the computation of + FRR bypass or detour to be associated with any primary LSP path + on the system. When the value of vRtrMplsGeneralSrlgFrr is + 'true' the use of SRLG constraint is enabled. + + By default, the use of SRLG constraint is disabled." + DEFVAL { false } + ::= { vRtrMplsGeneralEntry 14 } + +vRtrMplsGeneralSrlgFrrStrict OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The value of vRtrMplsGeneralSrlgFrrStrict specifies whether + to associate the LSP with a bypass or signal a detour if a + bypass or detour satisfies all other constraints except the SRLG + constraints. When the value of vRtrMplsGeneralSrlgFrrStrict is + 'true' and a path that meets SRLG constraints is not found, the + bypass or detour is not setup. If this value is set to 'true' + when vRtrMplsGeneralSrlgFrr is set to 'false', vRtrMplsGeneralSrlgFrr + is set to 'true' also. + + By default, the value of vRtrMplsGeneralSrlgFrrStrict is 'false'." + DEFVAL { false } + ::= { vRtrMplsGeneralEntry 15 } + +-- +-- Virtual Router MPLS General Statistics Table +-- +-- Augmentation of the vRtrMplsGeneralTable. +-- Use of AUGMENTS clause implies a one-to-one dependent relationship +-- between the base table, vRtrMplsGeneralTable, and the augmenting table, +-- vRtrMplsGeneralStatTable. This in effect extends the vRtrMplsGeneralTable +-- with additional columns. +-- Creation (or deletion) of a row in the vRtrMplsGeneralTable results in +-- the same fate for the row in the vRtrMplsGeneralStatTable. +-- + +vRtrMplsGeneralStatTable OBJECT-TYPE + SYNTAX SEQUENCE OF VRtrMplsGeneralStatEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The vRtrMplsGeneralStatTable contains statistics for an MPLS + protocol instance within a virtual router." + ::= { tmnxMplsObjs 8 } + +vRtrMplsGeneralStatEntry OBJECT-TYPE + SYNTAX VRtrMplsGeneralStatEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Each row entry represents a collection of statistics for an + instance of the MPLS protocol running within a virtual router. + + Entries cannot be created and deleted via SNMP SET operations." + AUGMENTS { vRtrMplsGeneralEntry } + ::= { vRtrMplsGeneralStatTable 1 } + +VRtrMplsGeneralStatEntry ::= SEQUENCE { + vRtrMplsGeneralStaticLspOriginate Counter32, + vRtrMplsGeneralStaticLspTransit Counter32, + vRtrMplsGeneralStaticLspTerminate Counter32, + vRtrMplsGeneralDynamicLspOriginate Counter32, + vRtrMplsGeneralDynamicLspTransit Counter32, + vRtrMplsGeneralDynamicLspTerminate Counter32, + vRtrMplsGeneralDetourLspOriginate Counter32, + vRtrMplsGeneralDetourLspTransit Counter32, + vRtrMplsGeneralDetourLspTerminate Counter32 +} + +vRtrMplsGeneralStaticLspOriginate OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object counts the number of static LSPs that originate + at this virtual router." + ::= { vRtrMplsGeneralStatEntry 1 } + +vRtrMplsGeneralStaticLspTransit OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object counts the number of static LSPs that transit + through this virtual router." + ::= { vRtrMplsGeneralStatEntry 2 } + +vRtrMplsGeneralStaticLspTerminate OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object counts the number of static LSPs that terminate + at this virtual router." + ::= { vRtrMplsGeneralStatEntry 3 } + +vRtrMplsGeneralDynamicLspOriginate OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object counts the number of dynamic LSPs that originate + at this virtual router." + ::= { vRtrMplsGeneralStatEntry 4 } + +vRtrMplsGeneralDynamicLspTransit OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object counts the number of dynamic LSPs that transit + through this virtual router." + ::= { vRtrMplsGeneralStatEntry 5 } + +vRtrMplsGeneralDynamicLspTerminate OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object counts the number of dynamic LSPs that terminate + at this virtual router." + ::= { vRtrMplsGeneralStatEntry 6 } + +vRtrMplsGeneralDetourLspOriginate OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object counts the number of detour LSPs that originate + at this virtual router." + ::= { vRtrMplsGeneralStatEntry 7 } + +vRtrMplsGeneralDetourLspTransit OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object counts the number of detour LSPs that transit + through this virtual router." + ::= { vRtrMplsGeneralStatEntry 8 } + +vRtrMplsGeneralDetourLspTerminate OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object counts the number of detour LSPs that terminate + at this virtual router." + ::= { vRtrMplsGeneralStatEntry 9 } + + +-- +-- Virtual Router MPLS Interface Table +-- + +vRtrMplsIfTable OBJECT-TYPE + SYNTAX SEQUENCE OF VRtrMplsIfEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The vRtrMplsIfTable has an entry for each router interface + configured for MPLS in the system." + ::= { tmnxMplsObjs 9 } + +vRtrMplsIfEntry OBJECT-TYPE + SYNTAX VRtrMplsIfEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Each row entry represents an interface on this virtual router + that participates in the MPLS protocol. A row cannot be created + or deleted via SNMP SET requests. A row with default attribute + values is created by setting the vRtrIfEntry attribute, + vRtrIfMplsStatus, to 'create'. A row is removed if + vRtrIfMplsStatus is set to 'delete'. However, an attempt to + destroy a row will fail if vRtrMplsIfAdminState has + not first been set to 'outOfService'." + INDEX { vRtrID, vRtrIfIndex } + ::= { vRtrMplsIfTable 1 } + +VRtrMplsIfEntry ::= SEQUENCE { + vRtrMplsIfAdminState TmnxAdminState, + vRtrMplsIfOperState TmnxOperState, + vRtrMplsIfAdminGroup Unsigned32, + vRtrMplsIfTeMetric Unsigned32 +} + +vRtrMplsIfAdminState OBJECT-TYPE + SYNTAX TmnxAdminState + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The desired administrative state for the MPLS protocol + running on this MPLS interface." + DEFVAL { outOfService } + ::= { vRtrMplsIfEntry 1 } + +vRtrMplsIfOperState OBJECT-TYPE + SYNTAX TmnxOperState + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This variable indicates the current status of the MPLS protocol + running on this MPLS interface." + ::= { vRtrMplsIfEntry 2 } + +vRtrMplsIfAdminGroup OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The value of vRtrMplsIfAdminGroup is a bit-map that identifies the + admin groups to which the interface belongs. If bit 'n' is set, + then the interface belongs to the admin group with value 'n'. + + By default, the interface does not belong to any admin groups." + DEFVAL { '00000000'H } + ::= { vRtrMplsIfEntry 3 } + +vRtrMplsIfTeMetric OBJECT-TYPE + SYNTAX Unsigned32 (0|1..16777215) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The value of vRtrMplsIfTeMetric specifies the traffic engineering metric + for this interface. The TE metric is exchanged in addition to the IGP + metric by the IGPs. Depending on the value configured for + vRtrMplsLspCspfTeMetricEnabled, either the TE metric or the native + IGP metric is used in CSPF computations of the LSP paths. The maximum + value that can be configured is a 24 bit value." + DEFVAL { 0 } + ::= { vRtrMplsIfEntry 4 } + +-- +-- Virtual Router MPLS Interface Statistics Table +-- +-- Augmentation of the vRtrMplsIfTable. +-- Use of AUGMENTS clause implies a one-to-one dependent relationship +-- between the base table, vRtrMplsIfTable, and the augmenting table, +-- vRtrMplsIfStatTable. This in effect extends the vRtrMplsIfTable +-- with additional columns. +-- Creation (or deletion) of a row in the vRtrMplsIfTable results in +-- the same fate for the row in the vRtrMplsIfStatTable. +-- + +vRtrMplsIfStatTable OBJECT-TYPE + SYNTAX SEQUENCE OF VRtrMplsIfStatEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The vRtrMplsIfStatTable has an entry for each router interface + configured for MPLS in the system." + ::= { tmnxMplsObjs 10 } + +vRtrMplsIfStatEntry OBJECT-TYPE + SYNTAX VRtrMplsIfStatEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Each row entry represents a collection of statistics for an + interface on this virtual router that participates in the + MPLS protocol. + + Entries cannot be created and deleted via SNMP SET operations." + AUGMENTS { vRtrMplsIfEntry } + ::= { vRtrMplsIfStatTable 1 } + +VRtrMplsIfStatEntry ::= SEQUENCE { + vRtrMplsIfTxPktCount Counter64, + vRtrMplsIfRxPktCount Counter64, + vRtrMplsIfTxOctetCount Counter64, + vRtrMplsIfRxOctetCount Counter64 +} + +vRtrMplsIfTxPktCount OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of MPLS labeled packets transmitted from this + interface." + ::= { vRtrMplsIfStatEntry 1 } + +vRtrMplsIfRxPktCount OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of MPLS labeled packets received on this + interface." + ::= { vRtrMplsIfStatEntry 2 } + +vRtrMplsIfTxOctetCount OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of bytes in MPLS labeled packets transmitted + on this interface." + ::= { vRtrMplsIfStatEntry 3 } + +vRtrMplsIfRxOctetCount OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of bytes in MPLS labeled packets received on + this interface." + ::= { vRtrMplsIfStatEntry 4 } + +-- +-- Virtual Router MPLS Tunnel AR Hop Table +-- +-- Augmentation of the mplsTunnelARHopEntry. +-- Use of AUGMENTS clause implies a one-to-one dependent relationship +-- between the base table, mplsTunnelARHopEntry, and the augmenting table, +-- vRtrMplsTunnelARHopTable. This in effect extends the mplsTunnelARHopEntry +-- with additional columns. +-- Creation (or deletion) of a row in the mplsTunnelARHopEntry results in +-- the same fate for the row in the vRtrMplsTunnelARHopTable. +-- + +vRtrMplsTunnelARHopTable OBJECT-TYPE + SYNTAX SEQUENCE OF VRtrMplsTunnelARHopEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The vRtrMplsTunnelARHopTable augments the mplsTunnelARHopEntry + in the MPLS-TE-MIB." + ::= { tmnxMplsObjs 11 } + +vRtrMplsTunnelARHopEntry OBJECT-TYPE + SYNTAX VRtrMplsTunnelARHopEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A row entry in this table corresponds to a row entry in the + mplsTunnelARHopTable and adds to the information contained in + that table" + AUGMENTS { mplsTunnelARHopEntry } + ::= { vRtrMplsTunnelARHopTable 1 } + +VRtrMplsTunnelARHopEntry ::= SEQUENCE { + vRtrMplsTunnelARHopProtection BITS, + vRtrMplsTunnelARHopRecordLabel MplsLabel, + vRtrMplsTunnelARHopRouterId IpAddress +} + +vRtrMplsTunnelARHopProtection OBJECT-TYPE + SYNTAX BITS { + localAvailable (0), + localInUse (1), + bandwidthProtected (2), + nodeProtected (3) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "If the 'localAvailable' bit is set, it indicates that the link + downstream of this node has been protected by means of a local + repair mechanism. This mechanism can be either the one-to-one + backup method or the facility backup method. + + If the 'localInUse' bit is set, then it indicates that the local + protection mechanism is being used to maintain this tunnel. + + If the 'bandwidthProtected' bit is set, then it indicates that + the backup path is guaranteed to provide the desired bandwidth. + + If the 'nodeProtected' bit is set, then it indicates that the + backup path provides protection against the failure of the next + LSR along the LSP." + ::= { vRtrMplsTunnelARHopEntry 1 } + +vRtrMplsTunnelARHopRecordLabel OBJECT-TYPE + SYNTAX MplsLabel + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "If label recording is enabled, vRtrMplsTunnelARHopRecordLabel + specifies the label that is advertised to the previous hop in + the hop list. If label recording is disabled, + vRtrMplsTunnelARHopRecordLabel will have a value of 4294967295" + ::= { vRtrMplsTunnelARHopEntry 2 } + +vRtrMplsTunnelARHopRouterId OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "vRtrMplsTunnelARHopRouterId specifies the router ID of the node + corresponding to this hop." + ::= { vRtrMplsTunnelARHopEntry 3 } + +-- +-- Virtual Router MPLS CSPF Tunnel Hop Table +-- + +vRtrMplsTunnelCHopTable OBJECT-TYPE + SYNTAX SEQUENCE OF VRtrMplsTunnelCHopEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The vRtrMplsTunnelCHopTable is used to hold the CSPF + path for a detour LSP. Each entry indicates a single + hop. + + Primary index is the vRtrMplsTunnelCHopListIndex which associates + multiple entries (hops) in the vRtrMplsTunnelCHopTable to a single + mplsTunnelEntry specified in the mplsTunnelTable. + + The first row in the table is the first hop after the + origination point of the tunnel." + ::= { tmnxMplsObjs 12 } + +vRtrMplsTunnelCHopEntry OBJECT-TYPE + SYNTAX VRtrMplsTunnelCHopEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in this table represents a CSPF tunnel hop. + Entries are created and deleted by the system." + INDEX { vRtrMplsTunnelCHopListIndex, vRtrMplsTunnelCHopIndex } + ::= { vRtrMplsTunnelCHopTable 1 } + +VRtrMplsTunnelCHopEntry ::= SEQUENCE { + vRtrMplsTunnelCHopListIndex Integer32, + vRtrMplsTunnelCHopIndex Integer32, + vRtrMplsTunnelCHopAddrType INTEGER, + vRtrMplsTunnelCHopIpv4Addr IpAddress, + vRtrMplsTunnelCHopIpv4PrefixLen INTEGER, + vRtrMplsTunnelCHopIpv6Addr InetAddressIPv6, + vRtrMplsTunnelCHopIpv6PrefixLen INTEGER, + vRtrMplsTunnelCHopAsNumber INTEGER, + vRtrMplsTunnelCHopLspId MplsLSPID, + vRtrMplsTunnelCHopStrictOrLoose INTEGER +} + +vRtrMplsTunnelCHopListIndex OBJECT-TYPE + SYNTAX Integer32 (1..2147483647) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Primary index into this table identifying a particular explicit route + object." + ::= { vRtrMplsTunnelCHopEntry 1 } + +vRtrMplsTunnelCHopIndex OBJECT-TYPE + SYNTAX Integer32 (1..2147483647) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Secondary index into this table identifying a particular hop." + ::= { vRtrMplsTunnelCHopEntry 2 } + +vRtrMplsTunnelCHopAddrType OBJECT-TYPE + SYNTAX INTEGER { + ipV4(1), + ipV6(2), + asNumber(3), + lspid(4) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Denotes the address type of this tunnel hop." + DEFVAL { ipV4 } + ::= { vRtrMplsTunnelCHopEntry 3 } + +vRtrMplsTunnelCHopIpv4Addr OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "If vRtrMplsTunnelCHopAddrType is set to ipV4(1), then this value will + contain the IPv4 address of this hop. This object is otherwise + insignificant and should contain a value of 0." + ::= { vRtrMplsTunnelCHopEntry 4 } + +vRtrMplsTunnelCHopIpv4PrefixLen OBJECT-TYPE + SYNTAX INTEGER (1..32) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "If vRtrMplsTunnelCHopAddrType is ipV4(1), then the prefix length for + this hop's IPv4 address is contained herein. This object is otherwise + insignificant and should contain a value of 0." + ::= { vRtrMplsTunnelCHopEntry 5 } + +vRtrMplsTunnelCHopIpv6Addr OBJECT-TYPE + SYNTAX InetAddressIPv6 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "If the vRtrMplsTunnelCHopAddrType is set to ipV6(2), then this + variable contains the IPv6 address of this hop. This object is + otherwise insignificant and should contain a value of 0." + ::= { vRtrMplsTunnelCHopEntry 6 } + +vRtrMplsTunnelCHopIpv6PrefixLen OBJECT-TYPE + SYNTAX INTEGER (1..128) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "If vRtrMplsTunnelCHopAddrType is set to ipV6(2), this value will + contain the prefix length for this hop's IPv6 address. This object is + otherwise insignificant and should contain a value of 0." + ::= { vRtrMplsTunnelCHopEntry 7 } + +vRtrMplsTunnelCHopAsNumber OBJECT-TYPE + SYNTAX INTEGER (0..65535) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "If vRtrMplsTunnelCHopAddrType is set to asNumber(3), then this value + will contain the AS number of this hop. This object is otherwise + insignificant and should contain a value of 0 to indicate this fact." + ::= { vRtrMplsTunnelCHopEntry 8 } + +vRtrMplsTunnelCHopLspId OBJECT-TYPE + SYNTAX MplsLSPID + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "If vRtrMplsTunnelCHopAddrType is set to lspid(4), then this value will + contain the LSPID of a tunnel of this hop. The present tunnel being + configured is tunneled through this hop (using label stacking). This + object is otherwise insignificant and should contain a value of 0 to + indicate this fact." + ::= { vRtrMplsTunnelCHopEntry 9 } + +vRtrMplsTunnelCHopStrictOrLoose OBJECT-TYPE + SYNTAX INTEGER { + strict(1), + loose(2) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Denotes whether this tunnel hop is routed in a strict or loose + fashion." + ::= { vRtrMplsTunnelCHopEntry 10 } + +-- +-- Virtual Router MPLS Administrative Group Table +-- + +vRtrMplsAdminGroupTable OBJECT-TYPE + SYNTAX SEQUENCE OF VRtrMplsAdminGroupEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The vRtrMplsAdminGroupTable has an entry for each administrative + group configured for the virtual router in the system. + + Administrative groups are resource constructs that define a link + color or resource class. They provide the ability to classify + network resources (links) into groups or colors based on zones, + geographic location, link location, etc. By doing so, network + administrators are able to do more granular traffic engineering + of LSPs." + ::= { tmnxMplsObjs 13 } + +vRtrMplsAdminGroupEntry OBJECT-TYPE + SYNTAX VRtrMplsAdminGroupEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Each row entry in the vRtrMplsAdminGroupTable represents an + administrative group which is simply a mapping between a group + name (an ASCII string) and a group value (a number in the range + 0 to 31). + + Entries in this table are created and deleted via SNMP SET + operations. An entry is created by setting the value of + vRtrMplsAdminGroupRowStatus to 'createAndWait'. The row status + for this entry can be set to active only once the value of + vRtrMplsAdminGroupValue has been set to a valid number in the + range 0 to 31. The entry is destroyed when + vRtrMplsAdminGroupRowStatus is set to 'destroy'." + INDEX { vRtrID, IMPLIED vRtrMplsAdminGroupName } + ::= { vRtrMplsAdminGroupTable 1 } + +VRtrMplsAdminGroupEntry ::= SEQUENCE { + vRtrMplsAdminGroupName TNamedItem, + vRtrMplsAdminGroupRowStatus RowStatus, + vRtrMplsAdminGroupValue Integer32 +} + +vRtrMplsAdminGroupName OBJECT-TYPE + SYNTAX TNamedItem + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The value of vRtrMplsAdminGroupName uniquely identifies the + name of the administrative group within a virtual router + instance." + ::= { vRtrMplsAdminGroupEntry 1 } + +vRtrMplsAdminGroupRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "vRtrMplsAdminGroupRowStatus is used to create, delete or + control entries in the vRtrMplsAdminGroupTable. To create + a row entry, the row status should be set to 'createAndWait'. + Before the row can be placed into the 'active' state, + vRtrMplsAdminGroupValue must be set to a value between 0 + and 31. To delete a row entry, the row status should be set + to 'destroy'" + ::= { vRtrMplsAdminGroupEntry 2 } + +vRtrMplsAdminGroupValue OBJECT-TYPE + SYNTAX Integer32 (-1|0..31) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The value of vRtrMplsAdminGroupValue specifies the group value + associated with this administrative group. This value is unique + within a virtual router instance. + + A value of -1 indicates that the group value for this entry has + not been set." + ::= { vRtrMplsAdminGroupEntry 3 } + +-- +-- Virtual Router MPLS Fate Sharing Group Table +-- + +vRtrMplsFSGroupTable OBJECT-TYPE + SYNTAX SEQUENCE OF VRtrMplsFSGroupEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The vRtrMplsFSGroupTable has an entry for each group that is + a part of the fate sharing database configured for the virtual + router in the system. + + A fate sharing group is used to define a group of links and + nodes in the network that share common risk attributes. To + minimize a single point of failure, backup paths can be created + that not only avoid the nodes and links of the primary path but + also any other nodes and links that share risk with the nodes + and links of the primary path." + ::= { tmnxMplsObjs 14 } + +vRtrMplsFSGroupEntry OBJECT-TYPE + SYNTAX VRtrMplsFSGroupEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Each row entry in the vRtrMplsFSGroupTable represents a + fate sharing group which is a database of nodes and links + that share common risk attributes. + + Entries in this table are created and deleted via SNMP SET + operations. An entry is created by setting the value of + vRtrMplsFSGroupRowStatus to 'createAndGo'. An entry can + be deleted by setting vRtrMplsFSGroupRowStatus to 'destroy'." + INDEX { vRtrID, vRtrMplsFSGroupName } + ::= { vRtrMplsFSGroupTable 1 } + +VRtrMplsFSGroupEntry ::= SEQUENCE { + vRtrMplsFSGroupName TNamedItem, + vRtrMplsFSGroupRowStatus RowStatus, + vRtrMplsFSGroupCost Unsigned32 +} + +vRtrMplsFSGroupName OBJECT-TYPE + SYNTAX TNamedItem + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The value of vRtrMplsFSGroupName uniquely identifies the + name of the fate sharing group within a virtual router + instance." + ::= { vRtrMplsFSGroupEntry 1 } + +vRtrMplsFSGroupRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "vRtrMplsFSGroupRowStatus is used to create, delete or + control entries in the vRtrMplsFSGroupTable. To create + a row entry, the row status should be set to 'createAndGo'. + To delete a row entry, the row status should be set to + 'destroy'" + ::= { vRtrMplsFSGroupEntry 2 } + +vRtrMplsFSGroupCost OBJECT-TYPE + SYNTAX Unsigned32 (1..65535) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The value of vRtrMplsFSGroupCost specifies the cost assigned + to the fate sharing group. This cost is applied to all nodes + and links that are part of this group and used for CSPF + calculations. The higher the cost of the node or link, the + lesser its chance of being selected as part of the path." + DEFVAL { 1 } + ::= { vRtrMplsFSGroupEntry 3 } + +-- +-- Virtual Router MPLS Fate Sharing Group Params Table +-- + +vRtrMplsFSGroupParamsTable OBJECT-TYPE + SYNTAX SEQUENCE OF VRtrMplsFSGroupParamsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The vRtrMplsFSGroupParamsTable has an entry for each node + or link that is part of a fate sharing group on this virtual + router." + ::= { tmnxMplsObjs 15 } + +vRtrMplsFSGroupParamsEntry OBJECT-TYPE + SYNTAX VRtrMplsFSGroupParamsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Each row entry in the vRtrMplsFSGroupParamsTable represents + either a node or a link that is a part of a fate sharing group + defined in the vRtrMplsFSGroupTable. + + Entries in this table are created and deleted via SNMP SET + operations. An entry is created by setting the value of + vRtrMplsFSGroupParamsRowStatus to 'createAndGo'. An entry + can be deleted by setting vRtrMplsFSGroupParamsRowStatus to + 'destroy'. + + To configure a node to be part of the group, create an entry + in this table with vRtrMplsFSGroupParamsFromAddr set to a + valid non-zero IP address and vRtrMplsFSGroupParamsToAddr set + to 0. To configure a link to be part of the group, create an + entry in this table with both vRtrMplsFSGroupParamsFromAddr + and vRtrMplsFSGroupParamsToAddr set to valid non-zero IP + addresses." + INDEX { vRtrID, + vRtrMplsFSGroupName, + vRtrMplsFSGroupParamsFromAddr, + vRtrMplsFSGroupParamsToAddr } + ::= { vRtrMplsFSGroupParamsTable 1 } + +VRtrMplsFSGroupParamsEntry ::= SEQUENCE { + vRtrMplsFSGroupParamsFromAddr IpAddress, + vRtrMplsFSGroupParamsToAddr IpAddress, + vRtrMplsFSGroupParamsRowStatus RowStatus +} + +vRtrMplsFSGroupParamsFromAddr OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The value of vRtrMplsFSGroupParamsFromAddr along with the + value of vRtrMplsFSGroupParamsToAddr uniquely identifies a + link or node within a fate sharing group. + + This value must be non-zero for all row entries whether it + represents a node or a link." + ::= { vRtrMplsFSGroupParamsEntry 1 } + +vRtrMplsFSGroupParamsToAddr OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The value of vRtrMplsFSGroupParamsToAddr along with the + value of vRtrMplsFSGroupParamsFromAddr uniquely identifies + a link or node within a fate sharing group. + + This value must be 0 for row entries that represent a node + and must be non-zero for row entries that represent a link." + ::= { vRtrMplsFSGroupParamsEntry 2 } + +vRtrMplsFSGroupParamsRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "vRtrMplsFSGroupParamsRowStatus is used to create, delete or + control entries in the vRtrMplsFSGroupParamsTable. To create + a row entry, the row status should be set to 'createAndGo'. + To delete a row entry, the row status should be set to + 'destroy'" + ::= { vRtrMplsFSGroupParamsEntry 3 } + +-- +-- MPLS Label Range Table +-- + +vRtrMplsLabelRangeTable OBJECT-TYPE + SYNTAX SEQUENCE OF VRtrMplsLabelRangeEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The vRtrMplsLabelRangeTable has an entry for each type of + label, the minimum and maximum value in the label range and + information on total available and aging labels in each range. + + This is a read-only table." + ::= { tmnxMplsObjs 17 } + +vRtrMplsLabelRangeEntry OBJECT-TYPE + SYNTAX VRtrMplsLabelRangeEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Each row entry in the vRtrMplsLabelRangeTable represents + a type of label. Each entry contains the label range used + by that label type and the number of aging and allocated + labels in the range." + INDEX { vRtrMplsLabelType } + ::= { vRtrMplsLabelRangeTable 1 } + +VRtrMplsLabelRangeEntry ::= SEQUENCE { + vRtrMplsLabelType INTEGER, + vRtrMplsLabelRangeMin Unsigned32, + vRtrMplsLabelRangeMax Unsigned32, + vRtrMplsLabelRangeAging Unsigned32, + vRtrMplsLabelRangeAvailable Unsigned32 +} + +vRtrMplsLabelType OBJECT-TYPE + SYNTAX INTEGER { + staticLsp (1), + staticSvc (2), + dynamic (3) + } + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The value of vRtrMplsLabelType specifies the type of + label and is the index for this table." + ::= { vRtrMplsLabelRangeEntry 1 } + +vRtrMplsLabelRangeMin OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of vRtrMplsLabelRangeMin specifies the minimum + label value in the range for a particular label type." + ::= { vRtrMplsLabelRangeEntry 2 } + +vRtrMplsLabelRangeMax OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of vRtrMplsLabelRangeMax specifies the maximum + label value in the range for a particular label type." + ::= { vRtrMplsLabelRangeEntry 3 } + +vRtrMplsLabelRangeAging OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of vRtrMplsLabelRangeAging represents the + number of labels that are currently allocated and aging." + ::= { vRtrMplsLabelRangeEntry 4 } + +vRtrMplsLabelRangeAvailable OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of vRtrMplsLabelRangeAvailable represents the + number of labels that are currently available for each + label type." + ::= { vRtrMplsLabelRangeEntry 5 } + +-- +-- MPLS Static LSP Label Table +-- + +vRtrMplsStaticLSPLabelTable OBJECT-TYPE + SYNTAX SEQUENCE OF VRtrMplsStaticLSPLabelEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The vRtrMplsStaticLSPLabelTable has an entry for each allocated + label that is part of the static LSP label range. This is a + read-only table." + ::= { tmnxMplsObjs 18 } + +vRtrMplsStaticLSPLabelEntry OBJECT-TYPE + SYNTAX VRtrMplsStaticLSPLabelEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Each row entry in the vRtrMplsStaticLSPLabelTable represents + a label of type static LSP that is currently allocated. + The entry includes information about the current owner + for that label." + + INDEX { vRtrMplsStaticLSPLabel } + ::= { vRtrMplsStaticLSPLabelTable 1 } + +VRtrMplsStaticLSPLabelEntry ::= SEQUENCE { + vRtrMplsStaticLSPLabel MplsLabel, + vRtrMplsStaticLSPLabelOwner TmnxMplsLabelOwner +} + +vRtrMplsStaticLSPLabel OBJECT-TYPE + SYNTAX MplsLabel (32..1023) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The value of vRtrMplsStaticLSPLabel specifies the label + value." + ::= { vRtrMplsStaticLSPLabelEntry 1 } + +vRtrMplsStaticLSPLabelOwner OBJECT-TYPE + SYNTAX TmnxMplsLabelOwner + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of vRtrMplsStaticLSPLabelOwner specifies the owner + for the label value vRtrMplsStaticLSPLabel." + ::= { vRtrMplsStaticLSPLabelEntry 2 } + +-- +-- MPLS Static Service Label Table +-- + +vRtrMplsStaticSvcLabelTable OBJECT-TYPE + SYNTAX SEQUENCE OF VRtrMplsStaticSvcLabelEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The vRtrMplsStaticSvcLabelTable has an entry for each allocated + label that is part of the static service label range. This + is a read-only table." + ::= { tmnxMplsObjs 19 } + +vRtrMplsStaticSvcLabelEntry OBJECT-TYPE + SYNTAX VRtrMplsStaticSvcLabelEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Each row entry in the vRtrMplsStaticSvcLabelTable represents + a label of type static-svc that is currently allocated. + The entry includes information about the current owner + for that label." + + INDEX { vRtrMplsStaticSvcLabel } + ::= { vRtrMplsStaticSvcLabelTable 1 } + +VRtrMplsStaticSvcLabelEntry ::= SEQUENCE { + vRtrMplsStaticSvcLabel MplsLabel, + vRtrMplsStaticSvcLabelOwner TmnxMplsLabelOwner +} + +vRtrMplsStaticSvcLabel OBJECT-TYPE + SYNTAX MplsLabel (2048..18431) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The value of vRtrMplsStaticSvcLabel specifies the label + value." + ::= { vRtrMplsStaticSvcLabelEntry 1 } + +vRtrMplsStaticSvcLabelOwner OBJECT-TYPE + SYNTAX TmnxMplsLabelOwner + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of vRtrMplsStaticSvcLabelOwner specifies + the owner for the label value vRtrMplsStaticSvcLabel." + DEFVAL { none } + ::= { vRtrMplsStaticSvcLabelEntry 2 } + +-- +-- Virtual Router MPLS SRLG group Table +-- +vRtrMplsSrlgGrpTableLastChanged OBJECT-TYPE + SYNTAX TimeStamp + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of vRtrMplsSrlgGrpTableLastChanged indicates the + sysUpTime at the time of the last modification to + vRtrMplsSrlgGrpTable by adding, deleting an entry or change + to a writable object in the table. + + If no changes were made to the table since the last + re-initialization of the local network management subsystem, + then this object contains a zero value." + ::= { tmnxMplsObjs 20 } + +vRtrMplsSrlgGrpTable OBJECT-TYPE + SYNTAX SEQUENCE OF VRtrMplsSrlgGrpEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The vRtrMplsSrlgGrpTable has an entry for each Shared Risk Link + Groups (SRLG) group configured for MPLS in the system." + ::= { tmnxMplsObjs 21 } + +vRtrMplsSrlgGrpEntry OBJECT-TYPE + SYNTAX VRtrMplsSrlgGrpEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Each row entry represents a SRLG group on this virtual router + that participates in the MPLS protocol. A row can be created + or deleted via SNMP SET requests." + INDEX { vRtrID, IMPLIED vRtrMplsSrlgGrpName } + ::= { vRtrMplsSrlgGrpTable 1 } + +VRtrMplsSrlgGrpEntry ::= SEQUENCE { + vRtrMplsSrlgGrpName TNamedItem, + vRtrMplsSrlgGrpRowStatus RowStatus, + vRtrMplsSrlgGrpLastChanged TimeStamp, + vRtrMplsSrlgGrpValue Unsigned32 +} + +vRtrMplsSrlgGrpName OBJECT-TYPE + SYNTAX TNamedItem + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The value of vRtrMplsSrlgGrpName indicates the SRLG group name." + ::= { vRtrMplsSrlgGrpEntry 1 } + +vRtrMplsSrlgGrpRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "vRtrMplsSrlgGrpRowStatus is used to create, delete or + control entries in the vRtrMplsSrlgGrpTable. A value must + also be set for vRtrMplsSrlgGrpValue before the row entry can + transition to the 'active' state." + ::= { vRtrMplsSrlgGrpEntry 2 } + +vRtrMplsSrlgGrpLastChanged OBJECT-TYPE + SYNTAX TimeStamp + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of vRtrMplsSrlgGrpLastChanged indicates the timestamp of + last change to this row in vRtrMplsSrlgGrpTable." + ::= { vRtrMplsSrlgGrpEntry 3 } + +vRtrMplsSrlgGrpValue OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The value of vRtrMplsSrlgGrpValue specifies the group value + associated with vRtrMplsSrlgGrpName. This value is unique + within a virtual router instance. + + At the time of row creation, a value for vRtrMplsSrlgGrpValue + must be specified or else row creation would fail." + ::= { vRtrMplsSrlgGrpEntry 4 } + +-- +-- Virtual Router MPLS Interface SRLG Group Table +-- +vRtrMplsIfSrlgGrpTblLastChanged OBJECT-TYPE + SYNTAX TimeStamp + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of vRtrMplsIfSrlgGrpTblLastChanged indicates the + sysUpTime at the time of the last modification to + vRtrMplsIfSrlgGrpTable by adding, deleting an entry or change + to a writable object in the table. + + If no changes were made to the table since the last + re-initialization of the local network management subsystem, + then this object contains a zero value." + ::= { tmnxMplsObjs 22 } + +vRtrMplsIfSrlgGrpTable OBJECT-TYPE + SYNTAX SEQUENCE OF VRtrMplsIfSrlgGrpEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The vRtrMplsIfSrlgGrpTable has an entry for each Shared Risk + Link Group (SRLG) groups associated with a router interface + configured for MPLS in the system." + ::= { tmnxMplsObjs 23 } + +vRtrMplsIfSrlgGrpEntry OBJECT-TYPE + SYNTAX VRtrMplsIfSrlgGrpEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Each row entry represents an SRLG group associated with a interface + on this virtual router that participates in the MPLS protocol. + + A row can be created or deleted via SNMP SET requests." + INDEX { vRtrID, vRtrIfIndex, IMPLIED vRtrMplsIfSrlgGrpName } + ::= { vRtrMplsIfSrlgGrpTable 1 } + +VRtrMplsIfSrlgGrpEntry ::= SEQUENCE { + vRtrMplsIfSrlgGrpName TNamedItem, + vRtrMplsIfSrlgGrpRowStatus RowStatus, + vRtrMplsIfSrlgGrpLastChanged TimeStamp +} + +vRtrMplsIfSrlgGrpName OBJECT-TYPE + SYNTAX TNamedItem + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The value of vRtrMplsIfSrlgGrpName indicates the SRLG group name." + ::= { vRtrMplsIfSrlgGrpEntry 1 } + +vRtrMplsIfSrlgGrpRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "vRtrMplsIfSrlgGrpRowStatus is used to create, delete or + control entries in the vRtrMplsIfSrlgGrpTable." + ::= { vRtrMplsIfSrlgGrpEntry 2 } + +vRtrMplsIfSrlgGrpLastChanged OBJECT-TYPE + SYNTAX TimeStamp + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of vRtrMplsIfSrlgGrpLastChanged indicates the timestamp + of last change to this row in vRtrMplsIfSrlgGrpTable." + ::= { vRtrMplsIfSrlgGrpEntry 3 } + +-- +-- Notification Information +-- +tmnxMplsNotificationlObjects OBJECT IDENTIFIER ::= { tmnxMplsObjs 16 } + +-- Trap control objects +-- + +vRtrMplsLspNotificationReasonCode OBJECT-TYPE + SYNTAX INTEGER { + noError(0), + noPathIsOperational(1) + } + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "Used by vRtrMplsLspDown, the value indicates the reason for the + LSP going down." + ::= { tmnxMplsNotificationlObjects 1 } + +vRtrMplsLspPathNotificationReasonCode OBJECT-TYPE + SYNTAX TmnxMplsLspFailCode + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "Used by vRtrMplsLspPathDown, the value indicates the reason for the + LSP path going down." + ::= { tmnxMplsNotificationlObjects 2 } + +vRtrMplsNotifyRow OBJECT-TYPE + SYNTAX RowPointer + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "used by Alcatel 7x50 SR series MPLS Configuration change + Notifications, the object ID indicates the MPLS table and entry." + ::= { tmnxMplsNotificationlObjects 3 } + + +-- +-- Notification Definitions +-- + +vRtrMplsStateChange NOTIFICATION-TYPE + OBJECTS { vRtrID, + vRtrMplsGeneralAdminState, + vRtrMplsGeneralOperState } + STATUS current + DESCRIPTION + "This Notification is generated when the MPLS + module changes state" + ::= { tmnxMplsNotifications 1 } + +vRtrMplsIfStateChange NOTIFICATION-TYPE + OBJECTS { vRtrID, + vRtrIfIndex, + vRtrMplsIfAdminState, + vRtrMplsIfOperState } + STATUS current + DESCRIPTION + "This Notification is generated when the MPLS + interface changes state" + ::= { tmnxMplsNotifications 2 } + +vRtrMplsLspUp NOTIFICATION-TYPE + OBJECTS { vRtrID, + vRtrMplsLspIndex, + vRtrMplsLspAdminState, + vRtrMplsLspOperState } + STATUS current + DESCRIPTION + "This Notification is generated when a LSP transitions + to the 'inService' state from any other state." + ::= { tmnxMplsNotifications 3 } + +vRtrMplsLspDown NOTIFICATION-TYPE + OBJECTS { vRtrID, + vRtrMplsLspIndex, + vRtrMplsLspAdminState, + vRtrMplsLspOperState, + vRtrMplsLspNotificationReasonCode } + STATUS current + DESCRIPTION + "This Notification is generated when a LSP transitions + out of 'inService' state to any other state." + ::= { tmnxMplsNotifications 4 } + +vRtrMplsLspPathUp NOTIFICATION-TYPE + OBJECTS { vRtrID, + vRtrMplsLspIndex, + mplsTunnelIndex, + mplsTunnelInstance, + mplsTunnelIngressLSRId, + vRtrMplsLspPathAdminState, + vRtrMplsLspPathOperState } + STATUS current + DESCRIPTION + "This Notification is generated when a LSP Path transitions + to the 'inService' state from any other state." + ::= { tmnxMplsNotifications 5 } + +vRtrMplsLspPathDown NOTIFICATION-TYPE + OBJECTS { vRtrID, + vRtrMplsLspIndex, + mplsTunnelIndex, + mplsTunnelInstance, + mplsTunnelIngressLSRId, + vRtrMplsLspPathAdminState, + vRtrMplsLspPathOperState, + vRtrMplsLspPathNotificationReasonCode } +-- ALCATEL CHANG +-- vRtrMplsLspPathNotificationReasonCode} +-- ALCATEL CHANG + + STATUS current + DESCRIPTION + "This Notification is generated when a LSP Path transitions + out of 'inService' state to any other state." + ::= { tmnxMplsNotifications 6 } + +vRtrMplsLspPathRerouted NOTIFICATION-TYPE + OBJECTS { vRtrMplsLspPathAdminState, + vRtrMplsLspPathOperState } + STATUS current + DESCRIPTION + "The vRtrMplsLspPathRerouted notification is generated when + an LSP Path is rerouted." + ::= { tmnxMplsNotifications 7 } + +vRtrMplsLspPathResignaled NOTIFICATION-TYPE + OBJECTS { vRtrMplsLspPathAdminState, + vRtrMplsLspPathOperState } + STATUS current + DESCRIPTION + "The vRtrMplsLspPathResignaled notification is generated when + an LSP Path is resignaled." + ::= { tmnxMplsNotifications 8 } + +-- +-- Conformance Information +-- +tmnxMplsCompliances OBJECT IDENTIFIER ::= { tmnxMplsConformance 1 } +tmnxMplsGroups OBJECT IDENTIFIER ::= { tmnxMplsConformance 2 } + +-- compliance statements + +-- tmnxMplsCompliance MODULE-COMPLIANCE +-- ::= { tmnxMplsCompliances 1 } + +-- tmnxMplsR2r1Compliance MODULE-COMPLIANCE +-- ::= { tmnxMplsCompliances 2 } + +tmnxMplsV3v0Compliance MODULE-COMPLIANCE + STATUS obsolete + DESCRIPTION + "The compliance statement for management of extended MPLS + on Alcatel 7x50 SR series systems 3.0 Release." + MODULE -- this module + MANDATORY-GROUPS { + tmnxMplsGlobalR2r1Group, + tmnxMplsLspR2r1Group, + tmnxMplsLspPathGroup, + tmnxMplsXCGroup, + tmnxMplsIfGroup, + tmnxMplsTunnelARHopGroup, + tmnxMplsTunnelCHopGroup, + tmnxMplsAdminGroupGroup, + -- tmnxMplsFSGroupGroup, + tmnxMplsNotificationR2r1Group, + tmnxMplsLabelRangeGroup + } + ::= { tmnxMplsCompliances 3 } + +tmnxMplsV5v0Compliance MODULE-COMPLIANCE + STATUS obsolete + DESCRIPTION + "The compliance statement for management of extended MPLS + on Alcatel 7xxx SR series systems 5.0 Release." + MODULE -- this module + MANDATORY-GROUPS { + tmnxMplsGlobalV5v0Group, + tmnxMplsLspV5v0Group, + tmnxMplsLspPathGroup, + tmnxMplsXCGroup, + tmnxMplsIfGroup, + tmnxMplsTunnelARHopGroup, + tmnxMplsTunnelCHopGroup, + tmnxMplsAdminGroupGroup, + -- tmnxMplsFSGroupGroup, + tmnxMplsNotificationR2r1Group, + tmnxMplsLabelRangeGroup + } + ::= { tmnxMplsCompliances 4 } + +tmnxMplsV6v0Compliance MODULE-COMPLIANCE + STATUS current + DESCRIPTION + "The compliance statement for management of extended MPLS + on Alcatel 7xxx SR series systems 6.0 Release." + MODULE -- this module + MANDATORY-GROUPS { + tmnxMplsGlobalV6v0Group, + tmnxMplsLspV5v0Group, + tmnxMplsLspPathGroup, + tmnxMplsXCGroup, + tmnxMplsIfGroup, + tmnxMplsTunnelARHopGroup, + tmnxMplsTunnelCHopGroup, + tmnxMplsAdminGroupGroup, + -- tmnxMplsFSGroupGroup, + tmnxMplsNotificationR2r1Group, + tmnxMplsLabelRangeGroup, + tmnxMplsSrlgV6v0Group, + tmnxMplsIfV6v0Group, + tmnxMplsLspV6v0Group + } + ::= { tmnxMplsCompliances 5 } + + +-- units of conformance + +-- tmnxMplsGlobalGroup OBJECT-GROUP +-- ::= { tmnxMplsGroups 1 } + +-- tmnxMplsLspGroup OBJECT-GROUP +-- ::= { tmnxMplsGroups 2 } + +tmnxMplsLspPathGroup OBJECT-GROUP + OBJECTS { vRtrMplsLspPathTableSpinlock, + vRtrMplsLspPathRowStatus, + vRtrMplsLspPathLastChange, + vRtrMplsLspPathType, + vRtrMplsLspPathCos, + vRtrMplsLspPathProperties, + vRtrMplsLspPathBandwidth, + vRtrMplsLspPathBwProtect, + vRtrMplsLspPathState, + vRtrMplsLspPathPreference, + vRtrMplsLspPathCosSource, + vRtrMplsLspPathClassOfService, + vRtrMplsLspPathSetupPriority, + vRtrMplsLspPathHoldPriority, + vRtrMplsLspPathRecord, + vRtrMplsLspPathHopLimit, + vRtrMplsLspPathSharing, + vRtrMplsLspPathAdminState, + vRtrMplsLspPathOperState, + vRtrMplsLspPathInheritance, + vRtrMplsLspPathLspId, + vRtrMplsLspPathRetryTimeRemaining, + vRtrMplsLspPathTunnelARHopListIndex, + vRtrMplsLspPathNegotiatedMTU, + vRtrMplsLspPathFailCode, + vRtrMplsLspPathFailNodeAddr, + vRtrMplsLspPathAdminGroupInclude, + vRtrMplsLspPathAdminGroupExclude, + vRtrMplsLspPathAdaptive, + vRtrMplsLspPathOptimizeTimer, + vRtrMplsLspPathNextOptimize, + vRtrMplsLspPathOperBandwidth, + vRtrMplsLspPathMBBState, + vRtrMplsLspPathResignal, + vRtrMplsLspPathTunnelCRHopListIndex, + vRtrMplsLspPathOperMTU, + vRtrMplsLspPathRecordLabel, + vRtrMplsLspPathTimeUp, + vRtrMplsLspPathTimeDown, + vRtrMplsLspPathRetryAttempts, + vRtrMplsLspPathTransitionCount, + vRtrMplsLspPathCspfQueries + } + STATUS current + DESCRIPTION + "The group of objects supporting management of extended MPLS LSP + to path mapping on Alcatel 7x50 SR series systems." + ::= { tmnxMplsGroups 3 } + +tmnxMplsXCGroup OBJECT-GROUP + OBJECTS { vRtrMplsXCIndex, + vRtrMplsInSegmentIfIndex, + vRtrMplsInSegmentLabel, + vRtrMplsOutSegmentIndex, + vRtrMplsERHopTunnelIndex, + vRtrMplsARHopTunnelIndex, + vRtrMplsRsvpSessionIndex, + vRtrMplsXCFailCode, + vRtrMplsXCCHopTableIndex + } + STATUS current + DESCRIPTION + "The group of objects supporting management of extended MPLS LSP + to cross-connection mapping on Alcatel 7x50 SR series systems." + ::= { tmnxMplsGroups 4 } + +tmnxMplsIfGroup OBJECT-GROUP + OBJECTS { vRtrMplsIfAdminState, + vRtrMplsIfOperState, + vRtrMplsIfAdminGroup, + vRtrMplsIfTxPktCount, + vRtrMplsIfRxPktCount, + vRtrMplsIfTxOctetCount, + vRtrMplsIfRxOctetCount + } + STATUS current + DESCRIPTION + "The group of objects supporting management of extended MPLS + interfaces on Alcatel 7x50 SR series systems." + ::= { tmnxMplsGroups 5 } + +tmnxMplsTunnelARHopGroup OBJECT-GROUP + OBJECTS { vRtrMplsTunnelARHopProtection, + vRtrMplsTunnelARHopRecordLabel, + vRtrMplsTunnelARHopRouterId + } + STATUS current + DESCRIPTION + "The group of objects supporting management of extended MPLS + Tunnel AR hops on Alcatel 7x50 SR series systems." + ::= { tmnxMplsGroups 6 } + +tmnxMplsTunnelCHopGroup OBJECT-GROUP + OBJECTS { vRtrMplsTunnelCHopAddrType, + vRtrMplsTunnelCHopIpv4Addr, + vRtrMplsTunnelCHopIpv4PrefixLen, + vRtrMplsTunnelCHopIpv6Addr, + vRtrMplsTunnelCHopIpv6PrefixLen, + vRtrMplsTunnelCHopAsNumber, + vRtrMplsTunnelCHopLspId, + vRtrMplsTunnelCHopStrictOrLoose + } + STATUS current + DESCRIPTION + "The group of objects supporting management of extended MPLS + CSPF Tunnel hops on Alcatel 7x50 SR series systems." + ::= { tmnxMplsGroups 7 } + +tmnxMplsAdminGroupGroup OBJECT-GROUP + OBJECTS { vRtrMplsAdminGroupRowStatus, + vRtrMplsAdminGroupValue + } + STATUS current + DESCRIPTION + "The group of objects supporting management of extended MPLS + administrative groups on Alcatel 7x50 SR series systems." + ::= { tmnxMplsGroups 8 } + +tmnxMplsFSGroupGroup OBJECT-GROUP + OBJECTS { vRtrMplsFSGroupRowStatus, + vRtrMplsFSGroupCost, + vRtrMplsFSGroupParamsRowStatus + } + STATUS current + DESCRIPTION + "The group of objects supporting management of extended MPLS + fate sharing groups on Alcatel 7x50 SR series systems." + ::= { tmnxMplsGroups 9 } + +tmnxMplsNotifyObjsGroup OBJECT-GROUP + OBJECTS { vRtrMplsLspNotificationReasonCode, + vRtrMplsLspPathNotificationReasonCode, + vRtrMplsNotifyRow, + vRtrMplsLspIndex + } + STATUS current + DESCRIPTION + "The group of objects supporting extended MPLS notifications + on Alcatel 7x50 SR series systems." + ::= { tmnxMplsGroups 10 } + +-- tmnxMplsNotificationGroup NOTIFICATION-GROUP +-- ::= { tmnxMplsGroups 11 } + +tmnxMplsGlobalR2r1Group OBJECT-GROUP + OBJECTS { vRtrMplsGeneralLastChange, + vRtrMplsGeneralAdminState, + vRtrMplsGeneralOperState, + vRtrMplsGeneralPropagateTtl, + vRtrMplsGeneralTE, + vRtrMplsGeneralNewLspIndex, + vRtrMplsGeneralOptimizeTimer, + vRtrMplsGeneralFRObject, + vRtrMplsGeneralResignalTimer, + vRtrMplsGeneralStaticLspOriginate, + vRtrMplsGeneralStaticLspTransit, + vRtrMplsGeneralStaticLspTerminate, + vRtrMplsGeneralDynamicLspOriginate, + vRtrMplsGeneralDynamicLspTransit, + vRtrMplsGeneralDynamicLspTerminate, + vRtrMplsGeneralDetourLspOriginate, + vRtrMplsGeneralDetourLspTransit, + vRtrMplsGeneralDetourLspTerminate + } + STATUS obsolete + DESCRIPTION + "The group of objects supporting general management of extended MPLS + on Alcatel 7x50 SR series systems 2.1 Release." + ::= { tmnxMplsGroups 12 } + +tmnxMplsLspR2r1Group OBJECT-GROUP + OBJECTS { vRtrMplsLspRowStatus, + vRtrMplsLspLastChange, + vRtrMplsLspName, + vRtrMplsLspAdminState, + vRtrMplsLspOperState, + vRtrMplsLspFromAddr, + vRtrMplsLspToAddr, + vRtrMplsLspType, + vRtrMplsLspOutSegIndx, + vRtrMplsLspRetryTimer, + vRtrMplsLspRetryLimit, + vRtrMplsLspMetric, + vRtrMplsLspDecrementTtl, + vRtrMplsLspCspf, + vRtrMplsLspFastReroute, + vRtrMplsLspFRHopLimit, + vRtrMplsLspFRBandwidth, + vRtrMplsLspClassOfService, + vRtrMplsLspSetupPriority, + vRtrMplsLspHoldPriority, + vRtrMplsLspRecord, + vRtrMplsLspPreference, + vRtrMplsLspBandwidth, + vRtrMplsLspBwProtect, + vRtrMplsLspHopLimit, + vRtrMplsLspNegotiatedMTU, + vRtrMplsLspRsvpResvStyle, + vRtrMplsLspRsvpAdspec, + vRtrMplsLspFRMethod, + vRtrMplsLspFRNodeProtect, + vRtrMplsLspAdminGroupInclude, + vRtrMplsLspAdminGroupExclude, + vRtrMplsLspAdaptive, + vRtrMplsLspInheritance, + vRtrMplsLspOptimizeTimer, + vRtrMplsLspOperFastReroute, + vRtrMplsLspFRObject, + vRtrMplsLspOctets, + vRtrMplsLspPackets, + vRtrMplsLspAge, + vRtrMplsLspTimeUp, + vRtrMplsLspTimeDown, + vRtrMplsLspPrimaryTimeUp, + vRtrMplsLspTransitions, + vRtrMplsLspLastTransition, + vRtrMplsLspPathChanges, + vRtrMplsLspLastPathChange, + vRtrMplsLspConfiguredPaths, + vRtrMplsLspStandbyPaths, + vRtrMplsLspOperationalPaths + } + STATUS obsolete + DESCRIPTION + "The group of objects supporting management of extended MPLS LSPs + on Alcatel 7x50 SR series systems 2.1 Release." + ::= { tmnxMplsGroups 13 } + +tmnxMplsNotificationR2r1Group NOTIFICATION-GROUP + NOTIFICATIONS { vRtrMplsStateChange, + vRtrMplsIfStateChange, + vRtrMplsLspUp, + vRtrMplsLspDown, + vRtrMplsLspPathUp, + vRtrMplsLspPathDown, + vRtrMplsLspPathRerouted, + vRtrMplsLspPathResignaled + } + STATUS current + DESCRIPTION + "The group of notifications supporting the extended MPLS feature + on Alcatel 7x50 SR series systems 2.1 Release." + ::= { tmnxMplsGroups 14 } + +tmnxMplsLabelRangeGroup OBJECT-GROUP + OBJECTS { vRtrMplsLabelRangeMin, + vRtrMplsLabelRangeMax, + vRtrMplsLabelRangeAging, + vRtrMplsLabelRangeAvailable, + vRtrMplsStaticLSPLabelOwner, + vRtrMplsStaticSvcLabelOwner + } + STATUS current + DESCRIPTION + "The group of objects supporting management of extended MPLS + label ranges on Alcatel 7x50 SR series systems." + ::= { tmnxMplsGroups 15 } + +tmnxMplsGlobalV5v0Group OBJECT-GROUP + OBJECTS { vRtrMplsGeneralLastChange, + vRtrMplsGeneralAdminState, + vRtrMplsGeneralOperState, + vRtrMplsGeneralPropagateTtl, + vRtrMplsGeneralTE, + vRtrMplsGeneralNewLspIndex, + vRtrMplsGeneralOptimizeTimer, + vRtrMplsGeneralFRObject, + vRtrMplsGeneralResignalTimer, + vRtrMplsGeneralStaticLspOriginate, + vRtrMplsGeneralStaticLspTransit, + vRtrMplsGeneralStaticLspTerminate, + vRtrMplsGeneralDynamicLspOriginate, + vRtrMplsGeneralDynamicLspTransit, + vRtrMplsGeneralDynamicLspTerminate, + vRtrMplsGeneralDetourLspOriginate, + vRtrMplsGeneralDetourLspTransit, + vRtrMplsGeneralDetourLspTerminate, + vRtrMplsGeneralHoldTimer, + vRtrMplsGeneralDynamicBypass + } + STATUS obsolete + DESCRIPTION + "The group of objects supporting general management of extended MPLS + on Alcatel 7x50 SR series systems 5.0 Release." + ::= { tmnxMplsGroups 16 } + +tmnxMplsLspV5v0Group OBJECT-GROUP + OBJECTS { vRtrMplsLspRowStatus, + vRtrMplsLspLastChange, + vRtrMplsLspName, + vRtrMplsLspAdminState, + vRtrMplsLspOperState, + vRtrMplsLspFromAddr, + vRtrMplsLspToAddr, + vRtrMplsLspType, + vRtrMplsLspOutSegIndx, + vRtrMplsLspRetryTimer, + vRtrMplsLspRetryLimit, + vRtrMplsLspMetric, + vRtrMplsLspDecrementTtl, + vRtrMplsLspCspf, + vRtrMplsLspFastReroute, + vRtrMplsLspFRHopLimit, + vRtrMplsLspFRBandwidth, + vRtrMplsLspClassOfService, + vRtrMplsLspSetupPriority, + vRtrMplsLspHoldPriority, + vRtrMplsLspRecord, + vRtrMplsLspPreference, + vRtrMplsLspBandwidth, + vRtrMplsLspBwProtect, + vRtrMplsLspHopLimit, + vRtrMplsLspNegotiatedMTU, + vRtrMplsLspRsvpResvStyle, + vRtrMplsLspRsvpAdspec, + vRtrMplsLspFRMethod, + vRtrMplsLspFRNodeProtect, + vRtrMplsLspAdminGroupInclude, + vRtrMplsLspAdminGroupExclude, + vRtrMplsLspAdaptive, + vRtrMplsLspInheritance, + vRtrMplsLspOptimizeTimer, + vRtrMplsLspOperFastReroute, + vRtrMplsLspFRObject, + vRtrMplsLspOctets, + vRtrMplsLspPackets, + vRtrMplsLspAge, + vRtrMplsLspTimeUp, + vRtrMplsLspTimeDown, + vRtrMplsLspPrimaryTimeUp, + vRtrMplsLspTransitions, + vRtrMplsLspLastTransition, + vRtrMplsLspPathChanges, + vRtrMplsLspLastPathChange, + vRtrMplsLspConfiguredPaths, + vRtrMplsLspStandbyPaths, + vRtrMplsLspOperationalPaths, + vRtrMplsLspHoldTimer + } + STATUS current + DESCRIPTION + "The group of objects supporting management of extended MPLS LSPs + on Alcatel 7x50 SR series systems 5.0 Release." + ::= { tmnxMplsGroups 17 } + +tmnxMplsGlobalV6v0Group OBJECT-GROUP + OBJECTS { vRtrMplsGeneralLastChange, + vRtrMplsGeneralAdminState, + vRtrMplsGeneralOperState, + vRtrMplsGeneralPropagateTtl, + vRtrMplsGeneralTE, + vRtrMplsGeneralNewLspIndex, + vRtrMplsGeneralOptimizeTimer, + vRtrMplsGeneralFRObject, + vRtrMplsGeneralResignalTimer, + vRtrMplsGeneralStaticLspOriginate, + vRtrMplsGeneralStaticLspTransit, + vRtrMplsGeneralStaticLspTerminate, + vRtrMplsGeneralDynamicLspOriginate, + vRtrMplsGeneralDynamicLspTransit, + vRtrMplsGeneralDynamicLspTerminate, + vRtrMplsGeneralDetourLspOriginate, + vRtrMplsGeneralDetourLspTransit, + vRtrMplsGeneralDetourLspTerminate, + vRtrMplsGeneralHoldTimer, + vRtrMplsGeneralDynamicBypass, + vRtrMplsGeneralNextResignal, + vRtrMplsGeneralOperDownReason, + vRtrMplsGeneralSrlgFrr, + vRtrMplsGeneralSrlgFrrStrict + } + STATUS current + DESCRIPTION + "The group of objects supporting general management of extended MPLS + on Alcatel 7x50 SR series systems 6.0 Release." + ::= { tmnxMplsGroups 18 } + +tmnxMplsSrlgV6v0Group OBJECT-GROUP + OBJECTS { vRtrMplsSrlgGrpTableLastChanged, + vRtrMplsSrlgGrpRowStatus, + vRtrMplsSrlgGrpLastChanged, + vRtrMplsSrlgGrpValue, + vRtrMplsIfSrlgGrpTblLastChanged, + vRtrMplsIfSrlgGrpRowStatus, + vRtrMplsIfSrlgGrpLastChanged + } + STATUS current + DESCRIPTION + "The group of objects supporting management of SRLG on Alcatel + 7xxx SR series systems release 6.0." + ::= { tmnxMplsGroups 19 } + +tmnxMplsIfV6v0Group OBJECT-GROUP + OBJECTS { vRtrMplsIfTeMetric + } + STATUS current + DESCRIPTION + "The group of objects supporting management of Te metric feature on + extended MPLS interfaces on 6.0 release Alcatel 7xxx SR series systems." + ::= { tmnxMplsGroups 21 } + +tmnxMplsLspV6v0Group OBJECT-GROUP + OBJECTS { + vRtrMplsLspCspfTeMetricEnabled + } + STATUS current + DESCRIPTION + "The group of objects supporting management of Te metric feature extended + MPLS LSPs on 6.0 release Alcatel 7xxx SR series systems." + ::= { tmnxMplsGroups 22 } + +END + |