Initial commitHEADmain

1 files changed, 281 insertions, 0 deletions

diff --git a/MIBS/nokia/aos7/ALCATEL-IND1-QCN-MIB b/MIBS/nokia/aos7/ALCATEL-IND1-QCN-MIB
new file mode 100644
index 0000000..6d5a65d
--- /dev/null
+++ b/MIBS/nokia/aos7/ALCATEL-IND1-QCN-MIB
@@ -0,0 +1,281 @@
+ALCATEL-IND1-QCN-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    Integer32,
+    MODULE-IDENTITY,
+    OBJECT-TYPE,
+    OBJECT-IDENTITY,
+    Unsigned32
+        FROM SNMPv2-SMI
+    TruthValue
+        FROM SNMPv2-TC
+    OBJECT-GROUP,
+    MODULE-COMPLIANCE
+        FROM SNMPv2-CONF
+    softentIND1QcnMib
+        FROM ALCATEL-IND1-BASE;
+
+alcatelIND1QcnMIB MODULE-IDENTITY
+    LAST-UPDATED "201109010000Z"
+    ORGANIZATION "Alcatel-Lucent"
+    CONTACT-INFO
+        "Please consult with Customer Service to ensure the most appropriate
+         version of this document is used with the products in question:
+
+                    Alcatel-Lucent, Enterprise Solutions Division
+                   (Formerly Alcatel Internetworking, Incorporated)
+                           26801 West Agoura Road
+                        Agoura Hills, CA  91301-5122
+                          United States Of America
+
+         Telephone:              North America  +1 800 995 2696
+                                 Latin America  +1 877 919 9526
+                                 Europe         +31 23 556 0100
+                                 Asia           +65 394 7933
+                                 All Other      +1 818 878 4507
+
+         Electronic Mail:         support@ind.alcatel.com
+             World Wide Web:          http://alcatel-lucent.com/wps/portal/enterprise
+             File Transfer Protocol:  ftp://ftp.ind.alcatel.com/pub/products/mibs"
+
+    DESCRIPTION
+        "This module describes an authoritative enterprise-specific Simple
+        Network Management Protocol (SNMP) Management Information Base (MIB):
+
+        For the Birds Of Prey Product Line
+        System Capability Manager, to allow for system control and limitation setting, of
+        different, features through out the system.
+        Capability manager is a centralized process which provides hardware information and
+        capability to other processes. To optimize the system performance , certain features
+        may be configured to a lower than the hardware limit through capability manager.
+
+        The right to make changes in specification and other information
+        contained in this document without prior notice is reserved.
+
+        No liability shall be assumed for any incidental, indirect, special, or
+        consequential damages whatsoever arising from or related to this
+        document or the information contained herein.
+
+        Vendors, end-users, and other interested parties are granted
+        non-exclusive license to use this specification in connection with
+        management of the products for which it is intended to be used.
+
+                     Copyright (C) 1995-2011 Alcatel-Lucent
+                         ALL RIGHTS RESERVED WORLDWIDE"
+
+    REVISION      "201109010000Z"
+    DESCRIPTION
+        "Capability Manager is used to set system wide limitation."
+    ::= { softentIND1QcnMib 1 }
+
+-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
+
+    alcatelIND1QcnMIBObjects OBJECT-IDENTITY
+    STATUS current
+    DESCRIPTION
+        "Branch For QCN Subsystem Managed Objects."
+    ::= { alcatelIND1QcnMIB 1 }
+
+    alcatelIND1QcnMIBConformance OBJECT-IDENTITY
+    STATUS current
+    DESCRIPTION
+        "Branch For QCN Subsystem Conformance Information."
+    ::= { alcatelIND1QcnMIB 2 }
+
+    alcatelIND1QcnMIBGroups OBJECT-IDENTITY
+    STATUS current
+    DESCRIPTION
+        "Branch For QCN Subsystem Units Of Conformance."
+    ::= { alcatelIND1QcnMIBConformance 1 }
+
+    alcatelIND1QcnMIBCompliances OBJECT-IDENTITY
+    STATUS current
+    DESCRIPTION
+        "Branch For QCN Subsystem Compliance Statements."
+    ::= { alcatelIND1QcnMIBConformance 2 }
+
+-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
+
+    alaQcnConfig  OBJECT IDENTIFIER ::= { alcatelIND1QcnMIBObjects 1 }
+    alaQcnConformance  OBJECT IDENTIFIER ::= { alcatelIND1QcnMIBObjects 2 }
+
+-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
+
+-- xxxxxxxxxxxxxxxxxxxx
+-- QCN Global Controls
+-- xxxxxxxxxxxxxxxxxxxx
+
+alaQcnGlobalTable  OBJECT-TYPE
+    SYNTAX  SEQUENCE OF AlaQcnGlobalEntry
+    MAX-ACCESS  not-accessible
+    STATUS  current
+    DESCRIPTION
+        "A table of QCN global configuration."
+    ::= { alaQcnConfig 1 }
+
+alaQcnGlobalEntry  OBJECT-TYPE
+    SYNTAX  AlaQcnGlobalEntry
+    MAX-ACCESS  not-accessible
+    STATUS  current
+    DESCRIPTION
+        "A QCN global Entry."
+    INDEX { alaQcnGlobalCompId }
+    ::= { alaQcnGlobalTable 1 }
+
+AlaQcnGlobalEntry ::= SEQUENCE {
+    alaQcnGlobalCompId
+        Integer32,
+    alaQcnGlobalCNMVlanTag
+        Integer32,
+    alaQcnGlobalCID
+        Integer32
+    }
+
+alaQcnGlobalCompId  OBJECT-TYPE
+    SYNTAX  Integer32 (1)
+    MAX-ACCESS  not-accessible
+    STATUS  current
+    DESCRIPTION
+        "Comp Id is the index to this table."
+    ::= { alaQcnGlobalEntry 1 }
+
+alaQcnGlobalCNMVlanTag OBJECT-TYPE
+    SYNTAX        Integer32 (0..4094)
+    MAX-ACCESS    read-write
+    STATUS        current
+    DESCRIPTION 
+        "When set, the vlan tag overrides the incoming vlan id and forces
+         CNMs to be transmitted in that vlan."
+    DEFVAL         { 0 }
+    ::= { alaQcnGlobalEntry 2 }
+
+alaQcnGlobalCID OBJECT-TYPE
+    SYNTAX        Integer32 (0..16777215)
+    MAX-ACCESS    read-write
+    STATUS        current
+    DESCRIPTION 
+        "Sets the Congestion Point ID sent as part of the Congestion
+         Notification Message."
+    DEFVAL         { 0 }
+    ::= { alaQcnGlobalEntry 3 }
+
+-- xxxxxxxxxxxxxxxxxxxxxxxx
+-- QCN Port Instance Table
+-- xxxxxxxxxxxxxxxxxxxxxxxx
+
+alaQcnPortInstanceTable  OBJECT-TYPE
+    SYNTAX  SEQUENCE OF AlaQcnPortInstanceEntry
+    MAX-ACCESS  not-accessible
+    STATUS  current
+    DESCRIPTION
+        "A table of DCP Port Instances."
+    ::= { alaQcnConfig 2 }
+
+alaQcnPortInstanceEntry  OBJECT-TYPE
+    SYNTAX  AlaQcnPortInstanceEntry
+    MAX-ACCESS  not-accessible
+    STATUS  current
+    DESCRIPTION
+        "A DCP Port Instance Entry."
+    INDEX { alaQcnPIIfIndex, alaQcnPIPriority }
+    ::= { alaQcnPortInstanceTable 1 }
+
+AlaQcnPortInstanceEntry ::= SEQUENCE {
+    alaQcnPIIfIndex
+        Unsigned32,
+    alaQcnPIPriority
+        Unsigned32,
+    alaQcnPIPriorityReset
+        TruthValue,
+    alaQcnPICncpStatsClear
+        TruthValue,
+    alaQcnPICncpReset
+        TruthValue
+    }
+
+alaQcnPIIfIndex  OBJECT-TYPE
+    SYNTAX  Unsigned32
+    MAX-ACCESS  not-accessible
+    STATUS  current
+    DESCRIPTION
+        "IfIndex of this port."
+    ::= { alaQcnPortInstanceEntry 1 }
+
+alaQcnPIPriority  OBJECT-TYPE
+    SYNTAX  Unsigned32
+    MAX-ACCESS  not-accessible
+    STATUS  current
+    DESCRIPTION
+        "Priority identifier of this port."
+    ::= { alaQcnPortInstanceEntry 2 }
+
+alaQcnPIPriorityReset OBJECT-TYPE
+    SYNTAX        TruthValue { true(1) }
+    MAX-ACCESS    read-write
+    STATUS        current
+    DESCRIPTION
+        "Set to true to reset the priority configuration to the global default."
+    ::= { alaQcnPortInstanceEntry 3 }
+
+alaQcnPICncpStatsClear OBJECT-TYPE
+    SYNTAX        TruthValue { true(1) }
+    MAX-ACCESS    read-write
+    STATUS        current
+    DESCRIPTION
+        "Set to true to clear the cncp statistics for this port
+         priority.  Will do nothing if stats are disabled."
+    ::= { alaQcnPortInstanceEntry 4 }
+
+alaQcnPICncpReset OBJECT-TYPE
+    SYNTAX        TruthValue { true(1) }
+    MAX-ACCESS    read-write
+    STATUS        current
+    DESCRIPTION
+        "Set to true to reset the cncp configuration to the global default for
+         this port priority."
+    ::= { alaQcnPortInstanceEntry 5 }
+
+-- -------------------------------------------------------------
+-- Compliance Statements
+-- -------------------------------------------------------------
+
+alcatelIND1QcnMIBCompliance MODULE-COMPLIANCE
+    STATUS  current
+    DESCRIPTION
+        "Compliance statement for QCN Subsystem."
+    MODULE  -- this module
+        MANDATORY-GROUPS
+        {
+            alaQcnGlobalGroup,
+            alaQcnPortInstanceGroup
+        }
+    ::= { alcatelIND1QcnMIBCompliances 1 }
+
+-- -------------------------------------------------------------
+-- Units Of Conformance
+-- -------------------------------------------------------------
+
+alaQcnGlobalGroup OBJECT-GROUP
+    OBJECTS
+    {
+        alaQcnGlobalCNMVlanTag,
+        alaQcnGlobalCID
+    }
+    STATUS current
+    DESCRIPTION
+        "Collection of Global QCN Configuration for management of QCN."
+    ::= { alcatelIND1QcnMIBGroups 1 }
+
+alaQcnPortInstanceGroup OBJECT-GROUP
+    OBJECTS
+    {
+        alaQcnPIPriorityReset,
+        alaQcnPICncpStatsClear,
+        alaQcnPICncpReset
+    }
+    STATUS current
+    DESCRIPTION
+        "Collection of QCN Port level Configuration for management of QCN."
+    ::= { alcatelIND1QcnMIBGroups 2 }
+
+END