diff options
| author | David Leutgeb <david.leutgeb@mannundmouse.com> | 2023-12-05 12:25:34 +0100 |
|---|---|---|
| committer | David Leutgeb <david.leutgeb@mannundmouse.com> | 2023-12-05 12:25:34 +0100 |
| commit | 98a672123c7872f6b9b75a9a2b6bb3aea504de6a (patch) | |
| tree | 9b13bd7f563c3198047bd359195327cf28b3caf0 /MIBS/nokia/ISIS-MIB | |
| download | mibs-98a672123c7872f6b9b75a9a2b6bb3aea504de6a.tar.gz mibs-98a672123c7872f6b9b75a9a2b6bb3aea504de6a.zip | |
Diffstat (limited to 'MIBS/nokia/ISIS-MIB')
| -rwxr-xr-x | MIBS/nokia/ISIS-MIB | 2656 |
1 files changed, 2656 insertions, 0 deletions
diff --git a/MIBS/nokia/ISIS-MIB b/MIBS/nokia/ISIS-MIB new file mode 100755 index 0000000..4c6c08d --- /dev/null +++ b/MIBS/nokia/ISIS-MIB @@ -0,0 +1,2656 @@ +-- Extracted from draft-ietf-isis-wg-mib-06.txt +-- +ISIS-MIB DEFINITIONS ::= BEGIN + + IMPORTS + TEXTUAL-CONVENTION, DisplayString, RowStatus, TruthValue, + TestAndIncr + FROM SNMPv2-TC + MODULE-IDENTITY, OBJECT-TYPE, OBJECT-IDENTITY, Integer32, + Counter32, experimental + FROM SNMPv2-SMI + MODULE-COMPLIANCE, OBJECT-GROUP + FROM SNMPv2-CONF + InetAddressType, InetAddress, InetAddressPrefixLength + FROM INET-ADDRESS-MIB; + + isisMIB MODULE-IDENTITY + LAST-UPDATED "200111151200Z" -- UTC date of the most recent REVISION. + ORGANIZATION "IETF IS-IS for IP Internets Working Group" + CONTACT-INFO + "Jeff Parker + Axiowave Networks + 200 Nickerson Rd. + Marlborough, MA 01752 + + jparker@axiowave.com" + + DESCRIPTION + "" + ::= { experimental 37 } + +-- Top-level stucture of the MIB + +isisObjects OBJECT IDENTIFIER ::= { isisMIB 1 } +isisNotifications OBJECT IDENTIFIER ::= { isisMIB 2 } +isisConformance OBJECT IDENTIFIER ::= { isisMIB 3 } + +-- OBJECT IDENTIFIER definitions + isisSystem OBJECT-IDENTITY + STATUS current + DESCRIPTION + "" + ::= { isisObjects 1 } + + isisCirc OBJECT-IDENTITY + STATUS current + DESCRIPTION + "" + ::= { isisObjects 2 } + + isisCircLevelValues OBJECT-IDENTITY + STATUS current + DESCRIPTION + "" + ::= { isisObjects 3 } + + isisCircPDUCounters OBJECT-IDENTITY + STATUS current + DESCRIPTION + "" + ::= { isisObjects 4 } + + isisISAdj OBJECT-IDENTITY + STATUS current + DESCRIPTION + "" + ::= { isisObjects 5 } + + isisReachAddr OBJECT-IDENTITY + STATUS current + DESCRIPTION + "" + ::= { isisObjects 6 } + + isisIPReachAddr OBJECT-IDENTITY + STATUS current + DESCRIPTION + "" + ::= { isisObjects 7 } + +-- Type definitions + + OSINSAddress ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "OSI Network Service Address, e.g. NSAP, Network Entity Title" + SYNTAX OCTET STRING (SIZE(1..20)) + + + SNPAAddress ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "A MAC Address or DTE Address or other SNPA Address." + SYNTAX OCTET STRING (SIZE(0..20)) + + NSAPPrefix ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "NSAP Prefix. The first octet of the string is used to + encode as an unsigned integer the length in bits of the + subsequent prefix. This length must be a multiple of 4 + bits and may range from 0..160. The second and + subsequent octets are used to hold the prefix value. + If the last 4 bits of the last octet are not part of + the prefix then their value is undefined." + SYNTAX OCTET STRING (SIZE(1..21)) + + + SNPAPrefix ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "SNPA Prefix. The first octet of the string is used to + encode as an unsigned integer the length in bits of the + subsequent prefix. The second and + subsequent octets are used to hold the prefix value. + Bits in the last octet which are not part of + the prefix have undefined value." + SYNTAX OCTET STRING (SIZE(1..21)) + + SystemID ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "A system ID." + SYNTAX OCTET STRING (SIZE(0..6)) + + + AdminState ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Type used in enabling and disabling a row." + SYNTAX INTEGER + { + off(1), + on(2) + } + + UpTime ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Number of seconds since the object has entered the state 'up'. + If the object is not up, the number of seconds since the + circuit was up, or since the system started, if the circuit + has never been up." + SYNTAX Integer32 + + LSPBuffSize ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Integer sub range for LSP size." + SYNTAX Integer32 (512..1492) + + + LevelState ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "states of the ISIS protocol." + SYNTAX INTEGER + { + off (1), + on (2), + waiting (3) + } + + SupportedProtocol ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Types of network protocol supported by Integrated ISIS. + The values for ISO8473 and IP are those registered for + these protocols in ISO TR9577." + SYNTAX INTEGER + { + iso8473(129), + ipV6(142), + ip(204) + } + + DefaultMetric ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Integer sub-range for default metric for single hop." + SYNTAX Integer32 (1..63) + + MetricType ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Class of metric: Internal or External." + SYNTAX INTEGER + { + internal(1), + external(2) + } + + CircuitID ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "ID for a circuit." + SYNTAX OCTET STRING (SIZE(2..9)) + + ISPriority ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Integer sub-range for ISIS priority." +-- TIMOS_EXTENSIONS Edited to accept 0 as per newer drafts 24/02/2004 +-- SYNTAX Integer32 (1..127) + SYNTAX Integer32 (0..127) +-- End TIMOS_EXTENSIONS + +-- Behaviour Definitions + +-- ResettingTimer behaviour definition +-- "This object specifies the interval between certain events in +-- the operation of the protocol state machine. If the value of +-- this object is set to a new value while the protocol state +-- machine is in operation, the implementation shall take the +-- necessary steps to ensure that for any time interval which +-- was in progress when the value of the corresponding object +-- was changed, the next expiration of that interval takes place +-- the specified time after the original start of that interval, +-- or immediately, whichever is later. The precision with which +-- this time shall be implemented shall be the same as that +-- associated with the basic operation of the timer object." + +-- ReplaceOnlyWhileDisabled behaviour definition +-- "This object may not be modified while the corresponding +-- table row's variable of type AdminState is in state on." + +-- OperationalState behaviour definition +-- "This object controls the enabling and disabling of the +-- corresponding table row. Setting this object to the value +-- off has the effect of disabling the corresponding row. +-- Setting this object to the value on has the effect of +-- enabling the corresponding row. Setting the value of this +-- object to the same value as its current value has no effect. +-- If the table entry also contains an object controlling the +-- row status then the object following the operationalState +-- behaviour shall not be set to on when the object following +-- the Row Status behaviour has value off. An attempt to do +-- so is rejected." + + + isisSysTable OBJECT-TYPE + SYNTAX SEQUENCE OF IsisSysEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The set of instances of the Integrated IS-IS protocol + existing on the system." + ::= { isisSystem 1 } + + isisSysEntry OBJECT-TYPE + SYNTAX IsisSysEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Each row defines information specific to a single + instance of the protocol existing on the system." + REFERENCE "ISIS.poi cLNSISISBasic-P (1)" + INDEX { isisSysInstance } + ::= { isisSysTable 1 } + IsisSysEntry ::= + SEQUENCE { + isisSysInstance + Integer32, + isisSysVersion + DisplayString, + isisSysType + INTEGER, + isisSysID + SystemID, + isisSysMaxPathSplits + Integer32, + isisSysMaxLSPGenInt + Integer32, + isisSysOrigL1LSPBuffSize + LSPBuffSize, + isisSysMaxAreaAddresses + Integer32, + isisSysMinL1LSPGenInt + Integer32, + isisSysMinL2LSPGenInt + Integer32, + isisSysPollESHelloRate + Integer32, + isisSysWaitTime + Integer32, + isisSysAdminState + AdminState, + isisSysL1State + LevelState, + isisSysCorrLSPs + Counter32, + isisSysLSPL1DbaseOloads + Counter32, + isisSysManAddrDropFromAreas + Counter32, + isisSysAttmptToExMaxSeqNums + Counter32, + isisSysSeqNumSkips + Counter32, + isisSysOwnLSPPurges + Counter32, + isisSysIDFieldLenMismatches + Counter32, + isisSysMaxAreaAddrMismatches + Counter32, + isisSysOrigL2LSPBuffSize + LSPBuffSize, + isisSysL2State + LevelState, + isisSysLSPL2DbaseOloads + Counter32, + isisSysAuthFails + Counter32, + isisSysLSPIgnoreErrors + TruthValue, + isisSysLogAdjacencyChanges + TruthValue, + isisSysPartChanges + Counter32, + isisSysMaxAreaCheck + TruthValue, + isisSysNextCircIndex + TestAndIncr, + isisSysExistState + RowStatus, + isisSysL2toL1Leaking + TruthValue, + isisSysSetOverload + INTEGER + } + + isisSysInstance OBJECT-TYPE +-- TIMOS_EXTENSIONS Edited to accept 0 for M-ISIS instances (0..127) +-- Edited to extend range to support indices used for Shortest Path Bridging +-- SYNTAX Integer32 (1..10000) + SYNTAX Integer32 (0..127|1024..2047) +-- End TIMOS_EXTENSIONS + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The unique identifier of the Integrated IS-IS instance + to which this row corresponds. This object follows the + index behaviour." + ::= { isisSysEntry 1 } + + isisSysVersion OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The version number of the IS-IS protocol to which this + instance conforms. This value must be set by the + implementation when the row is valid." + REFERENCE "ISIS.aoi version (1)" + ::= { isisSysEntry 2 } + + isisSysType OBJECT-TYPE + SYNTAX INTEGER { + level1IS (1), + level2IS (2), + level1L2IS (3) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The type of this instance of the Integrated IS-IS + protocol. This object follows the + replaceOnlyWhileDisabled behaviour." + REFERENCE "ISIS.aoi iSType (2)" + ::= { isisSysEntry 3 } + + isisSysID OBJECT-TYPE + SYNTAX SystemID + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The ID for this instance of the Integrated IS-IS + protocol. This value is appended to each of the + instance's area addresses to form the Network Entity + Titles valid for this instance. The derivation of a value + for this object is implementation-specific. Some + implementations may assign values and not permit write, + others may require the value to be set manually." + REFERENCE "ISIS.aoi systemId (119)" + ::= { isisSysEntry 4 } + + isisSysMaxPathSplits OBJECT-TYPE + SYNTAX Integer32 (1..32) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Maximum number of paths with equal routing metric value + which it is permitted to split between. This object + follows the replaceOnlyWhileDisabled behaviour." + REFERENCE "ISIS.aoi maximumPathSplits (3)" + DEFVAL { 2 } + ::= { isisSysEntry 5 } + + isisSysMaxLSPGenInt OBJECT-TYPE + SYNTAX Integer32 (1..65535) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Maximum interval, in seconds, between generated LSPs + by this instance. This object follows the resettingTimer + behaviour." + REFERENCE "ISIS.aoi maximumLSPGenerationInterval (6)" + DEFVAL { 900 } + ::= { isisSysEntry 6 } + + isisSysOrigL1LSPBuffSize OBJECT-TYPE + SYNTAX LSPBuffSize + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The maximum size of Level 1 LSPs and SNPs originated by + this instance. This object follows the + replaceOnlyWhileDisabled behaviour." + REFERENCE "ISIS.aoi originatingL1LSPBufferSize (9)" + DEFVAL { 1492 } + ::= { isisSysEntry 7 } + + isisSysMaxAreaAddresses OBJECT-TYPE + SYNTAX Integer32 (3..254) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The maximum number of area addresses to be permitted for + the area in which this instance exists. Note that all + Intermediate Systems in the same area must have the same + value configured for this attribute if correct operation + is to be assumed. This object follows the + replaceOnlyWhileDisabled behaviour." + REFERENCE "ISIS.aoi maximumAreaAddresses (4)" + DEFVAL { 3 } + ::= { isisSysEntry 8 } + + isisSysMinL1LSPGenInt OBJECT-TYPE + SYNTAX Integer32 (1..65535) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Minimum interval, in seconds, between successive generation + of L1 LSPs with the same LSPID by this instance. + This object follows the resettingTimer behaviour." + REFERENCE "ISIS.aoi minimumLSPGenerationInterval (11)" + DEFVAL { 30 } + ::= { isisSysEntry 9 } + + isisSysMinL2LSPGenInt OBJECT-TYPE + SYNTAX Integer32 (1..65535) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Minimum interval, in seconds, between successive generation + of L2 LSPs with the same LSPID by this instance. + This object follows the resettingTimer behaviour." + REFERENCE "ISIS.aoi minimumLSPGenerationInterval (11)" + DEFVAL { 30 } + ::= { isisSysEntry 10 } + + isisSysPollESHelloRate OBJECT-TYPE + SYNTAX Integer32 (1..65535) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The value, in seconds, to be used for the suggested ES + configuration timer in ISH PDUs when soliciting the ES + configuration." + REFERENCE "ISIS.aoi pollESHelloRate (13)" + DEFVAL { 50 } + ::= { isisSysEntry 11 } + + isisSysWaitTime OBJECT-TYPE + SYNTAX Integer32 (1..65535) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Number of seconds to delay in waiting state before + entering on state. This object follows the resettingTimer + behaviour." + REFERENCE "ISIS.aoi waitingTime (15)" + DEFVAL { 60 } + ::= { isisSysEntry 12 } + + isisSysAdminState OBJECT-TYPE + SYNTAX AdminState + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The administrative state of this instance of the Integrated + IS-IS protocol. Setting this object to the value on when + its current value is off enables operation of this + instance of the Integrated IS-IS protocol." + DEFVAL { off } + ::= { isisSysEntry 13 } + + isisSysL1State OBJECT-TYPE + SYNTAX LevelState + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The state of the Level 1 database." + REFERENCE "ISIS.aoi l1State (17)" + ::= { isisSysEntry 14 } + + isisSysCorrLSPs OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of corrupted LSPs detected." + REFERENCE "ISIS.aoi corruptedLSPsDetected (19)" + ::= { isisSysEntry 15 } + + isisSysLSPL1DbaseOloads OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of times the LSP L1 database has become + overloaded." + REFERENCE "ISIS.aoi lSPL1DatabaseOverloads (20)" + ::= { isisSysEntry 16 } + + isisSysManAddrDropFromAreas OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of times a manual address has been dropped from + the area." + REFERENCE "ISIS.aoi manualAddressesDroppedFromArea (21)" + ::= { isisSysEntry 17 } + + isisSysAttmptToExMaxSeqNums OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of times the IS has attempted to exceed the + maximum sequence number." + REFERENCE "ISIS.aoi + attemptsToExceedmaximumSequenceNumber (22)" + ::= { isisSysEntry 18 } + + isisSysSeqNumSkips OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of times a sequence number skip has occurred." + REFERENCE "ISIS.aoi sequenceNumberSkips (23)" + ::= { isisSysEntry 19 } + + isisSysOwnLSPPurges OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of times a zero-aged copy of the system's own LSP + is received from some other node." + REFERENCE "ISIS.aoi ownLSPPurges (24)" + ::= { isisSysEntry 20 } + + isisSysIDFieldLenMismatches OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of times a PDU is received with a different value + for ID field length to that of the receiving system." + REFERENCE "ISIS.aoi iDFieldLengthMismatches (25)" + ::= { isisSysEntry 21 } + + isisSysMaxAreaAddrMismatches OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of times a PDU is received with a different value + for MaximumAreaAddresses from that of the receiving + system." + REFERENCE "ISIS.aoi MaximumAreaAddressesMismatches (118)" + ::= { isisSysEntry 22 } + +-- The following objects map those from the cLNSISISLevel2-P +-- Package + + isisSysOrigL2LSPBuffSize OBJECT-TYPE + SYNTAX LSPBuffSize + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The maximum size of Level 2 LSPs and SNPs originated by + this system. This object follows the + replaceOnlyWhileDisabled behaviour." + REFERENCE "ISIS.aoi originatingL2LSPBufferSize (26)" + DEFVAL { 1492 } + ::= { isisSysEntry 23 } + + isisSysL2State OBJECT-TYPE + SYNTAX LevelState + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The state of the Level 2 database." + REFERENCE "ISIS.aoi l2State (28)" + ::= { isisSysEntry 24 } + + isisSysLSPL2DbaseOloads OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of times the Level 2 LSP database has become + overloaded." + REFERENCE "ISIS.aoi lSPL2DatabaseOverloads (32)" + ::= { isisSysEntry 25 } + + isisSysAuthFails OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of authentication failures recognized by this + instance of the protocol." + ::= { isisSysEntry 26 } + + isisSysLSPIgnoreErrors OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "If true, allow the router to ignore IS-IS link state packets + (LSPs) that are received with internal checksum errors rather + than purging the LSPs." + DEFVAL { false } + ::= { isisSysEntry 27 } + + isisSysLogAdjacencyChanges OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "If true, causes IS-IS to generate a log message when an + IS-IS adjacency changes state (up or down)." + DEFVAL { false } + ::= { isisSysEntry 28 } + + isisSysPartChanges OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "partition changes" + ::= { isisSysEntry 29 } + + isisSysMaxAreaCheck OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "When on, enables checking of maximum area + addresses per IS version of ISO10589." + DEFVAL { true } + ::= { isisSysEntry 30 } + + isisSysNextCircIndex OBJECT-TYPE + SYNTAX TestAndIncr + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object is used to assign values to + isisCircIndex as described in 'Textual + Conventions for SNMPv2'. The network manager + reads this object, and then writes the value + back as the isisCircIndex in a SET that creates + a new instance of isisCircEntry. If the SET + fails with the code 'inconsistentValue', then + the process must be repeated; If the SET succeeds, + then the object is incremented, and the new + instance is created according to the manager's + directions." + ::= { isisSysEntry 31 } + + isisSysExistState OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The state of the ISIS router. Turning this off + forces the router to forget all current state" + DEFVAL { active } + ::= { isisSysEntry 32 } + + isisSysL2toL1Leaking OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "If true, allow the router to leak L2 routes into L1." + DEFVAL { false } + ::= { isisSysEntry 33 } + + isisSysSetOverload OBJECT-TYPE + SYNTAX INTEGER + { + setL1Overload(1), + setL2Overload(2), + setL1L2Overload(3), + overloadClear(4) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Administrativly set the overload bit for each level. + The overload bit will continue to be set if the + implementation runs out of memory, independent of + this variable" + DEFVAL {overloadClear } + ::= { isisSysEntry 34 } + +-- The Level 1 Manual Area Address Table +-- contains the set of area addresses manually configured +-- for each instance of the Integrated IS-IS protocol. +-- At least one row in which the value of +-- isisManAreaAddrExistState +-- is on must be present for each instance of the protocol +-- when isisSysAdminState is also on for that instance. The +-- maximum number of rows in this table for each instance of +-- the protocol for which the object isisManAreaAddrExistState +-- has the value on is the value of isisSysMaxAreaAddresses. +-- An Attempt to create a new row such that the number of +-- rows with isisManAreaAddrExistState set to on for that +-- protocol instance exceeds isisSysMaxAreaAddresses +-- is rejected." + + isisManAreaAddrTable OBJECT-TYPE + SYNTAX SEQUENCE OF IsisManAreaAddrEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The set of manual area addresses configured on this + Intermediate System." + REFERENCE "ISIS.aoi manualAreaAddresses (10)" + ::= { isisSystem 2 } + + isisManAreaAddrEntry OBJECT-TYPE + SYNTAX IsisManAreaAddrEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Each entry contains one area address manually configured + on this system" + INDEX { isisSysInstance, + isisManAreaAddr } + ::= { isisManAreaAddrTable 1 } + + IsisManAreaAddrEntry ::= + SEQUENCE { + isisManAreaAddr + OSINSAddress, + isisManAreaAddrExistState + RowStatus + } + + isisManAreaAddr OBJECT-TYPE + SYNTAX OSINSAddress + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A manually configured area address for this system. This + object follows the index behaviour. + + Note: an index for the entry {1, {49.0001} active} in + this table would be the ordered pair + (1, (0x03 0x49 0x00 0x01)), as the length of an Octet + string is part of the OID." + ::= { isisManAreaAddrEntry 1 } + + isisManAreaAddrExistState OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The state of the isisManAreaAddrEntry. This object + follows the Row Status behaviour. If an attempt is + made to set this object to the value destroy when the + corresponding isisManAreaAddrEntry is the only valid + entry for this instance and when the corresponding ISIS + instance has isisSysAdminState set to 'on' then the + attempt to delete the row is rejected." + DEFVAL { active } + ::= { isisManAreaAddrEntry 2 } + +-- The Level 1 Area Address Table + +-- The Level 1 Area Address Table contains the +-- union of the sets of area addresses reported in all Level 1 +-- LSPs received by this Intermediate System. + + isisAreaAddrTable OBJECT-TYPE + SYNTAX SEQUENCE OF IsisAreaAddrEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The union of the sets of area addresses reported in all + Level 1 LSPs received by this instance of the protocol." + REFERENCE "ISIS.aoi areaAddresses (18)" + ::= { isisSystem 3 } + + isisAreaAddrEntry OBJECT-TYPE + SYNTAX IsisAreaAddrEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Each entry contains one area address reported in a + Level 1 LSP received by this instance of the protocol." + INDEX { isisSysInstance, + isisAreaAddr } + ::= { isisAreaAddrTable 1 } + + IsisAreaAddrEntry ::= + SEQUENCE { + isisAreaAddr + OSINSAddress + } + + isisAreaAddr OBJECT-TYPE + SYNTAX OSINSAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "An area address reported in a Level 1 LSP received by + this instance of the protocol." + ::= { isisAreaAddrEntry 1 } + +-- The System Integrated Group +-- The System Integrated Group is present if the system +-- supports Integrated ISIS at Level 1. + +-- The System Protocol Supported Table + +-- The System Protocol Supported Table contains the manually +-- configured set of protocols supported by each +-- instance of the Integrated ISIS protocol. +-- + + isisSysProtSuppTable OBJECT-TYPE + SYNTAX SEQUENCE OF IsisSysProtSuppEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table contains the manually configured set of + protocols supported by each instance of the Integrated + ISIS protocol." + ::= { isisSystem 4 } + + isisSysProtSuppEntry OBJECT-TYPE + SYNTAX IsisSysProtSuppEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Each entry contains one protocol supported by an + instance of the Integrated ISIS protocol." + + INDEX { isisSysInstance, + isisSysProtSuppProtocol } + + ::= { isisSysProtSuppTable 1 } + + IsisSysProtSuppEntry ::= + SEQUENCE { + isisSysProtSuppProtocol + SupportedProtocol, + isisSysProtSuppExistState + RowStatus + } + + isisSysProtSuppProtocol OBJECT-TYPE + SYNTAX SupportedProtocol + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "One supported protocol. This object follows the index + behaviour." + ::= { isisSysProtSuppEntry 1 } + + isisSysProtSuppExistState OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The state of the isisSysProtSuppEntry. This object + follows the RowStatus behavior." + DEFVAL { active } + ::= { isisSysProtSuppEntry 2 } + + +-- The Summary Address Table + +-- The Summary Address Table contains the set of summary +-- addresses manually configured for each instance of +-- IP Integrated ISIS on the system. + + isisSummAddrTable OBJECT-TYPE + SYNTAX SEQUENCE OF IsisSummAddrEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The set of IP summary addresses to use in forming + summary TLVs originated by this Intermediate System. + + An administrator may use a summary address to combine + and modify IP Reachability announcements. If the + Intermediate system can reach any subset of the summary + address, the summary address will be announced instead, + at the configured metric." + ::= { isisSystem 5 } + + isisSummAddrEntry OBJECT-TYPE + SYNTAX IsisSummAddrEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Each entry contains one IP summary address." + + INDEX { isisSysInstance, + isisSummAddressType, + isisSummAddress, + isisSummAddrPrefixLen } + ::= { isisSummAddrTable 1 } + + IsisSummAddrEntry ::= + SEQUENCE { + isisSummAddressType + InetAddressType, + isisSummAddress + InetAddress, + isisSummAddrPrefixLen + InetAddressPrefixLength, + isisSummAddrExistState + RowStatus, + isisSummAddrAdminState + INTEGER, + isisSummAddrDefaultMetric + DefaultMetric + } + + isisSummAddressType OBJECT-TYPE + SYNTAX InetAddressType + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The Type of IP address for this summary address. + This object follows the index behaviour." + ::= { isisSummAddrEntry 1 } + + isisSummAddress OBJECT-TYPE + SYNTAX InetAddress (SIZE(4|16)) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The IP Address value for this summary address. + This object follows the index behaviour." + ::= { isisSummAddrEntry 2 } + + isisSummAddrPrefixLen OBJECT-TYPE + SYNTAX InetAddressPrefixLength (0..128) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The Length of the IP NetMask for this summary address." + ::= { isisSummAddrEntry 3 } + + isisSummAddrExistState OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The existence state of this summary address. This object + follows the row status behaviour." + DEFVAL { active } + ::= { isisSummAddrEntry 4 } + + isisSummAddrAdminState OBJECT-TYPE + SYNTAX INTEGER + { + summaryL1(1), + summaryL2(2), + summaryL1L2(3), + summaryOff(4) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The administrative state of this entry. When the + administrative state changes, if the new value would + cause the contents of LSPs originated by the system + to change, then those new LSPs must be generated and + sent as soon as is permitted by the ISIS protocol." + DEFVAL { summaryOff } + ::= { isisSummAddrEntry 5 } + + isisSummAddrDefaultMetric OBJECT-TYPE + SYNTAX DefaultMetric + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The default metric value to announce this summary + address with in LSPs generated by this system." + DEFVAL { 20 } + ::= { isisSummAddrEntry 6 } + +-- The Circuit Group + +-- The Circuit Group is current + +-- The Circuit Table +-- Each broadcast or point-to-point interface on the system +-- corresponds to one entry in the Circuit table. There may be +-- many X.25 DA circuit entries in the Circuit table for an +-- X.25 interface. + + isisCircTable OBJECT-TYPE + SYNTAX SEQUENCE OF IsisCircEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The table of circuits used by each instance of + Integrated IS-IS on this system." + ::= { isisCirc 1 } + + isisCircEntry OBJECT-TYPE + SYNTAX IsisCircEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An isisCircEntry exists for each circuit used by + Integrated IS-IS on this system." + INDEX { isisSysInstance, + isisCircIndex } + ::= { isisCircTable 1 } + + IsisCircEntry ::= + SEQUENCE { + isisCircIndex + Integer32, + isisCircIfIndex + Integer32, + isisCircIfSubIndex + Integer32, + isisCircLocalID + Integer32, + isisCircAdminState + AdminState, + isisCircExistState + RowStatus, + isisCircType + INTEGER, + isisCircExtDomain + TruthValue, + isisCircAdjChanges + Counter32, + isisCircInitFails + Counter32, + isisCircRejAdjs + Counter32, + isisCircOutCtrlPDUs + Counter32, + isisCircInCtrlPDUs + Counter32, + isisCircIDFieldLenMismatches + Counter32, + isisCircLevel + INTEGER, + isisCircMCAddr + INTEGER, + isisCircPtToPtCircID + CircuitID, + isisCircPassiveCircuit + TruthValue, + isisCircMeshGroupEnabled + INTEGER, + isisCircMeshGroup + Integer32, + isisCircSmallHellos + AdminState, + isisCircUpTime + UpTime + } + + isisCircIndex OBJECT-TYPE + SYNTAX Integer32 (1..2000000000) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The identifier of this circuit, unique within the + instance of the protocol. This object follows the index + behaviour. This is for SNMP Indexing purposes only + and has no relation to any protocol value." + ::= { isisCircEntry 1 } + + isisCircIfIndex OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The value of ifIndex for the interface to which this + circuit corresponds. This object cannot be modified + after creation" + ::= { isisCircEntry 2 } + + isisCircIfSubIndex OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "A specifier for the part of the interface ifIndex to which + this circuit corresponds, such as a DLCI or VPI/VCI. + This object cannot be modified after creation" + ::= { isisCircEntry 3 } + + isisCircLocalID OBJECT-TYPE + SYNTAX Integer32(0..255) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "An identification that can be used in protocol packets + to identify a circuit. Values of isisCircLocalID do + not need to be unique. They are only required to differ + on LANs where the Intermediate System is the Designated + Intermediate System." + ::= { isisCircEntry 4 } + + isisCircAdminState OBJECT-TYPE + SYNTAX AdminState + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The administrative state of the circuit. This + object follows the AdminState behaviour." + DEFVAL { off } + ::= { isisCircEntry 5 } + + isisCircExistState OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The existence state of this circuit. This object follows + the Row Status behaviour." + DEFVAL { active } + ::= { isisCircEntry 6 } + + isisCircType OBJECT-TYPE + SYNTAX INTEGER { + broadcast(1), + ptToPt(2), + staticIn(3), + staticOut(4), + dA(5) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The type of the circuit. This object follows the + replaceOnlyWhileDisabled behaviour. The type specified + must be compatible with the type of the interface defined + by the value of isisCircIfIndex." + REFERENCE "ISIS.aoi type (33)" + ::= { isisCircEntry 7 } + + isisCircExtDomain OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "If true, suppress normal transmission of and + interpretation of Intra-domain ISIS PDUs on this + circuit." + REFERENCE "ISIS.aoi externalDomain (46)" + DEFVAL { false } + ::= { isisCircEntry 8 } + + isisCircAdjChanges OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of times an adjacency state change has + occurred on this circuit." + REFERENCE "ISIS.aoi changesInAdjacencyState (40)" + ::= { isisCircEntry 14 } + + isisCircInitFails OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of times initialization of this circuit has + failed." + REFERENCE "ISIS.aoi initializationFailures (41)" + ::= { isisCircEntry 15 } + + isisCircRejAdjs OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of times an adjacency has been rejected on + this circuit." + REFERENCE "ISIS.aoi rejectedAdjacencies (42)" + ::= { isisCircEntry 16 } + + isisCircOutCtrlPDUs OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of IS-IS control PDUs sent on this circuit." + REFERENCE "ISIS.aoi iSISControlPDUsSent (43)" + ::= { isisCircEntry 17 } + + isisCircInCtrlPDUs OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of IS-IS control PDUs received on this + circuit." + REFERENCE "ISIS.aoi controlPDUsReceived (44)" + ::= { isisCircEntry 18 } + + isisCircIDFieldLenMismatches OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of times an IS-IS control PDU with an ID + field length different to that for this system has been + received." + REFERENCE "ISIS.aoi iDFieldLengthMismatches (25)" + ::= { isisCircEntry 19 } + + isisCircLevel OBJECT-TYPE + SYNTAX INTEGER + { + level1(1), + level2(2), + level1L2(3) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Indicates which type of packets will be sent and + accepted on this circuit. The values used will be + modified by the settings of isisSysType. This + object follows the replaceOnlyWhileDisabled behaviour." + DEFVAL { level1L2 } + ::= { isisCircEntry 20 } + + isisCircMCAddr OBJECT-TYPE + SYNTAX INTEGER{ + group (1), + functional (2) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Specifies which type of multicast address will + be used for sending HELLO PDUs on this + circuit." + DEFVAL { group } + ::= { isisCircEntry 21 } + + isisCircPtToPtCircID OBJECT-TYPE + SYNTAX CircuitID + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The ID of the circuit allocated during initialization. + If no value has been negotiated (either because the + adjacency is to an End System, or because initialization + has not yet successfully completed), this object has the + value which would be proposed for this circuit (i.e. the + concatenation of the local system ID and the one octet + local Circuit ID for this circuit." + REFERENCE "ISIS.aoi ptPtCircuitID (51)" + ::= { isisCircEntry 22 } + + isisCircPassiveCircuit OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Should we include this interface in LSPs, even if + it is not running the ISIS Protocol?" + REFERENCE "" + DEFVAL { false } + ::= { isisCircEntry 23 } + + isisCircMeshGroupEnabled OBJECT-TYPE + SYNTAX INTEGER { + inactive(1), + blocked(2), + set(3) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Is this port a member of a mesh group, or blocked? + Circuits in the same mesh group act as a virtual + multiaccess network. LSPs seen on one circuit in + a mesh group will not be flooded to another circuit + in the same mesh group." + REFERENCE "" + DEFVAL { inactive } + ::= { isisCircEntry 24 } + + isisCircMeshGroup OBJECT-TYPE + SYNTAX Integer32 (1..2000000000) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Circuits in the same mesh group act as a virtual + multiaccess network. LSPs seen on one circuit in + a mesh group will not be flooded to another circuit + in the same mesh group. If isisCircMeshGroupEnabled + is inactive, this value is ignored." + REFERENCE "" + DEFVAL { 1 } + ::= { isisCircEntry 25 } + + isisCircSmallHellos OBJECT-TYPE + SYNTAX AdminState + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Can we send unpadded hellos on LAN circuits? Off means + LAN Hellos must be padded." + DEFVAL { off } + ::= { isisCircEntry 26 } + + isisCircUpTime OBJECT-TYPE + SYNTAX UpTime + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "If the circuit is up, the amount of time in seconds + since this circuit entered state 'up'. If the circuit + is not up, the number of seconds since the circuit was + up, or since the system started, if the circuit has + never been up. + + Note: This can be implemented as start time less + the current time." + ::= { isisCircEntry 27 } + +-- The Circuit Level Table +-- This table captures level-specific information about a circuit + + isisCircLevelTable OBJECT-TYPE + SYNTAX SEQUENCE OF IsisCircLevelEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Level specific information about circuits used by IS-IS" + ::= { isisCircLevelValues 1 } + + isisCircLevelEntry OBJECT-TYPE + SYNTAX IsisCircLevelEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An isisCircLevelEntry exists for each level on + each circuit used by Integrated IS-IS on this system." + INDEX { isisSysInstance, + isisCircIndex, + isisCircLevelIndex } + ::= { isisCircLevelTable 1 } + + IsisCircLevelEntry ::= + SEQUENCE { + isisCircLevelIndex + INTEGER, + isisCircLevelDefaultMetric + DefaultMetric, + isisCircLevelISPriority + ISPriority, + isisCircLevelCircID + CircuitID, + isisCircLevelDesIS + SystemID, + isisCircLevelLANDesISChanges + Counter32, + isisCircLevelHelloMultiplier + Integer32, + isisCircLevelHelloTimer + Integer32, + isisCircLevelDRHelloTimer + Integer32, + isisCircLevelLSPThrottle + Integer32, + isisCircLevelMinLSPRetransInt + Integer32, + isisCircLevelCSNPInterval + Integer32, + isisCircLevelPartSNPInterval + Integer32 + } + + isisCircLevelIndex OBJECT-TYPE + SYNTAX INTEGER { + level1IS (1), + level2IS (2) + } + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The level that this entry describes." + ::= { isisCircLevelEntry 1 } + + isisCircLevelDefaultMetric OBJECT-TYPE + SYNTAX DefaultMetric + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The default metric value of this circuit for this level." + REFERENCE "ISIS.aoi l1DefaultMetric (35)" + DEFVAL { 10 } + ::= { isisCircLevelEntry 2 } + + isisCircLevelISPriority OBJECT-TYPE + SYNTAX ISPriority + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The priority for becoming LAN Designated + Intermediate System at this level." + REFERENCE "ISIS.aoi l2IntermediateSystemPriority (73)" + DEFVAL { 64 } + ::= { isisCircLevelEntry 3 } + + isisCircLevelCircID OBJECT-TYPE + SYNTAX CircuitID + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The ID of the circuit allocated during initialization. + If no value has been negotiated (either because the + adjacency is to an End System, or because initialization + has not yet successfully completed), this object has the + value which would be proposed for this circuit (i.e. the + concatenation of the local system ID and the one octet + local Circuit ID for this circuit." + REFERENCE "ISIS.aoi ptPtCircuitID (51)" + ::= { isisCircLevelEntry 4 } + + isisCircLevelDesIS OBJECT-TYPE + SYNTAX SystemID + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The ID of the LAN Designated Intermediate System + on this circuit at this level. If, for any reason, + this system is not partaking in the relevant + Designated Intermediate System election process, + then the value returned is the zero length OCTET STRING." + REFERENCE "ISIS.aoi l2DesignatedIntermediateSystem (75)" + ::= { isisCircLevelEntry 5 } + + isisCircLevelLANDesISChanges OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of times the LAN Designated + Intermediate System has changed at this level." + REFERENCE "ISIS.aoi + lanL2DesignatedIntermediateSystemChanges (76)" + ::= { isisCircLevelEntry 6 } + + isisCircLevelHelloMultiplier OBJECT-TYPE + SYNTAX Integer32 (2..100) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This value is multiplied by the corresponding HelloTimer + and the result in seconds (rounded up) is used as the + holding time in transmitted hellos, to be used by receivers + of hello packets from this IS" + REFERENCE "ISIS.aoi iSISHelloTimer (45)" + DEFVAL { 10 } + ::= { isisCircLevelEntry 7 } + + isisCircLevelHelloTimer OBJECT-TYPE + SYNTAX Integer32 (10..600000) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Maximum period, in milliseconds, between IIH PDUs + on multiaccess networks at this level for LANs. + The value at level 1 is used as the period between + Hellos on point to point circuits. Setting this + value at level 2 on a point to point circuit will + result in an error of InconsistentValue. + + This object follows the resettingTimer behaviour." + REFERENCE "ISIS.aoi iSISHelloTimer (45)" + DEFVAL { 3000 } + ::= { isisCircLevelEntry 8 } + + isisCircLevelDRHelloTimer OBJECT-TYPE + SYNTAX Integer32 (10..120000) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Period, in milliseconds, between Hello PDUs on + multiaccess networks when this IS is the Designated + Intermediate System. This object follows the + resettingTimer behaviour." + REFERENCE "ISIS.aoi iSISHelloTimer (45)" + DEFVAL { 1000 } + ::= { isisCircLevelEntry 9 } + + isisCircLevelLSPThrottle OBJECT-TYPE + SYNTAX Integer32 (1..65535) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Minimal interval of time, in milliseconds, between + transmissions of LSPs on an interface at this level." + REFERENCE "ISIS.aoi minimumBroadcastLSPTransmissionInterval (5)" + DEFVAL { 10 } + ::= { isisCircLevelEntry 10 } + + isisCircLevelMinLSPRetransInt OBJECT-TYPE + SYNTAX Integer32 (1..300) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Minimum interval, in seconds, between re-transmission of + an LSP at this level. This object follows the resettingTimer + behavior. + + Note that isisCircLevelLSPThrottle controls + how fast we send back to back LSPs. This variable + controls how fast we re-send the same LSP." + REFERENCE "ISIS.aoi minimumLSPTransmissionInterval (5)" + DEFVAL { 5 } + ::= { isisCircLevelEntry 11 } + + isisCircLevelCSNPInterval OBJECT-TYPE + SYNTAX Integer32 (1..600) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Interval of time, in seconds, between transmission + of CSNPs on multiaccess networks if this router is + the designated router at this level." + REFERENCE "" + DEFVAL { 10 } + ::= { isisCircLevelEntry 12 } + + isisCircLevelPartSNPInterval OBJECT-TYPE + SYNTAX Integer32 (1..120) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Minimum interval between sending Partial Sequence Number + PDUs at this level. This object follows the resettingTimer + behaviour." + REFERENCE "ISIS.aoi partialSNPInterval (14)" + DEFVAL { 2 } + ::= { isisCircLevelEntry 13 } + +-- isisPacketCountTable keeps track of the number of IS-IS +-- control packets sent and received at each level + + isisPacketCountTable OBJECT-TYPE + SYNTAX SEQUENCE OF IsisPacketCountEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Information about IS-IS packets sent and received" + ::= { isisCircPDUCounters 1 } + + isisPacketCountEntry OBJECT-TYPE + SYNTAX IsisPacketCountEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Information about IS-IS protocol traffic at one level + on one circuit in one direction" + INDEX { isisSysInstance, + isisCircIndex, + isisPacketCountLevel, + isisPacketCountDirection } + ::= { isisPacketCountTable 1 } + + IsisPacketCountEntry ::= + SEQUENCE { + isisPacketCountLevel + INTEGER, + isisPacketCountDirection + INTEGER, + isisPacketCountHello + Counter32, + isisPacketCountLSP + Counter32, + isisPacketCountCSNP + Counter32, + isisPacketCountPSNP + Counter32 + } + + isisPacketCountLevel OBJECT-TYPE + SYNTAX INTEGER + { + level1(1), + level2(2) + } + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The level at which these PDU counts have been collected." + ::= { isisPacketCountEntry 1 } + + isisPacketCountDirection OBJECT-TYPE + SYNTAX INTEGER + { + sending(1), + receiving(2) + } + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Were we sending or receiving these PDUs?" + ::= { isisPacketCountEntry 2 } + + + isisPacketCountHello OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of IS-IS Hello PDUs seen in this + direction at this level." + REFERENCE "ISIS.aoi iSISControlPDUsSent (43)" + ::= { isisPacketCountEntry 3 } + + isisPacketCountLSP OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of IS-IS LSPs seen in this + direction at this level." + REFERENCE "ISIS.aoi iSISControlPDUsSent (43)" + ::= { isisPacketCountEntry 4 } + + isisPacketCountCSNP OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of IS-IS CSNPs seen in this + direction at this level." + REFERENCE "ISIS.aoi iSISControlPDUsSent (43)" + ::= { isisPacketCountEntry 5 } + + isisPacketCountPSNP OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of IS-IS PSNPs seen in this + direction at this level." + REFERENCE "ISIS.aoi iSISControlPDUsSent (43)" + ::= { isisPacketCountEntry 6 } + +-- The Circuit IS Group +-- +-- The Circuit IS Group is present if the system supports the +-- IS functions of the ISO 9542 protocol. +-- The Circuit IS Table +-- +-- This table is not implemented - jdp + + + +-- The IS Adjacency Group +-- +-- The IS Adjacency Group is current and contains information +-- about adjacencies to routers maintained by the Integrated +-- IS-IS protocol +-- +-- The IS Adjacency Table +-- +-- Each adjacency to an IS corresponds to one entry in this +-- table. + isisISAdjTable OBJECT-TYPE + SYNTAX SEQUENCE OF IsisISAdjEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The table of adjacencies to Intermediate Systems." + ::= { isisISAdj 1 } + + isisISAdjEntry OBJECT-TYPE + SYNTAX IsisISAdjEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Each entry corresponds to one adjacency to an + Intermediate System on this system." + INDEX { isisSysInstance, + isisCircIndex, + isisISAdjIndex } + ::= { isisISAdjTable 1 } + + IsisISAdjEntry ::= + SEQUENCE { + isisISAdjIndex + Integer32, + isisISAdjState + INTEGER, + isisISAdjNeighSNPAAddress + SNPAAddress, + isisISAdjNeighSysType + INTEGER, + isisISAdjNeighSysID + OCTET STRING, + isisISAdjUsage + INTEGER, + isisISAdjHoldTimer + Integer32, + isisISAdjNeighPriority + ISPriority, + isisISAdjUpTime + UpTime + } + + isisISAdjIndex OBJECT-TYPE + SYNTAX Integer32 (1..2000000000) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A unique value identifying the IS adjacency from all + other such adjacencies on this circuit. This value is + assigned by the system when the adjacency is created + automatically." + ::= { isisISAdjEntry 1 } + + + isisISAdjState OBJECT-TYPE + SYNTAX INTEGER { + initializing (1), + up (2), + failed (3), + down (4) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The state of the adjacency" + REFERENCE "ISIS.aoi adjacencyState (78)" + ::= { isisISAdjEntry 2 } + + isisISAdjNeighSNPAAddress OBJECT-TYPE + SYNTAX SNPAAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The SNPA address of the neighboring system." + REFERENCE "ISIS.aoi neighbourSNPAAddress (79)" + ::= { isisISAdjEntry 3 } + + isisISAdjNeighSysType OBJECT-TYPE + SYNTAX INTEGER { + l1IntermediateSystem(1), + l2IntermediateSystem(2), + l1L2IntermediateSystem(3), + unknown(4) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The type of the neighboring system." + REFERENCE "ISIS.aoi neighbourSystemType (80)" + ::= { isisISAdjEntry 4 } + + isisISAdjNeighSysID OBJECT-TYPE + SYNTAX OCTET STRING (SIZE(0..12)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The system ID and 4 byte circuit ID of the + neighboring Intermediate System set from + the source ID field of the Three-Way-Handshake + information from the neighbor's IIH PDUs." + REFERENCE "ISIS.aoi neighbourSystemIds (83)" + ::= { isisISAdjEntry 5 } + + isisISAdjUsage OBJECT-TYPE + SYNTAX INTEGER { + undefined(1), + level1(2), + level2(3), + level1and2(4) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "An adjacency of type level1 is used for level 1 + traffic only. An adjacency of type level2 is used + for level 2 traffic only. An adjacency of type level1and2 + is used for both level 1 and level 2 traffic. There + may be two adjacencies (of types level1 and level2) + between the same pair of Intermediate Systems." + REFERENCE "ISIS.aoi adjacencyUsage (82)" + ::= { isisISAdjEntry 6 } + + isisISAdjHoldTimer OBJECT-TYPE + SYNTAX Integer32 (1..65535) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The holding time for this adjacency updated from + received IIH PDUs." + REFERENCE "ISIS.aoi holdingTimer (85)" + ::= { isisISAdjEntry 7 } + + isisISAdjNeighPriority OBJECT-TYPE + SYNTAX ISPriority + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Priority of the neighboring Intermediate System for + becoming the LAN Level 1 Designated Intermediate System + if the value of isisISAdjNeighSysType is + L1IntermediateSystem or LAN Level 2 Designated + Intermediate System if the value of + isisISAdjNeighSysType is L2IntermediateSystem." + REFERENCE "ISIS.aoi lANPriority (86)" + ::= { isisISAdjEntry 8 } + + isisISAdjUpTime OBJECT-TYPE + SYNTAX UpTime + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "If the adjacency is up, the amount of time in seconds + since this adjacency entered state 'up'. If the adjacency + is not up, the number of seconds since the adjacency was + up, or since the system started, if the adjacency has + never been up. + + Note: This can be implemented as start time less + the current time." + ::= { isisISAdjEntry 9 } + +-- The IS Adjacency Area Address Table + +-- The IS Adjacency Area Address Table contains the set of +-- Area Addresses of neighboring +-- Intermediate Systems as reported in IIH PDUs. + + isisISAdjAreaAddrTable OBJECT-TYPE + SYNTAX SEQUENCE OF IsisISAdjAreaAddrEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table contains the set of Area Addresses of + neighboring Intermediate Systems as reported in received + IIH PDUs." + REFERENCE "ISIS.aoi areaAddressesOfNeighbour (84)" + ::= { isisISAdj 2 } + + isisISAdjAreaAddrEntry OBJECT-TYPE + SYNTAX IsisISAdjAreaAddrEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Each entry contains one Area Address reported by a + neighboring Intermediate System in its IIH PDUs." + INDEX { isisSysInstance, + isisCircIndex, + isisISAdjAreaAddrAdjIndex, + isisISAdjAreaAddress } + ::= { isisISAdjAreaAddrTable 1 } + + IsisISAdjAreaAddrEntry ::= + SEQUENCE { + isisISAdjAreaAddrAdjIndex + Integer32, + isisISAdjAreaAddress + OSINSAddress + } + + isisISAdjAreaAddrAdjIndex OBJECT-TYPE + SYNTAX Integer32 (1..2000000000) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The identifier of the IS adjacency to which this entry + belongs." + ::= { isisISAdjAreaAddrEntry 1 } + + isisISAdjAreaAddress OBJECT-TYPE + SYNTAX OSINSAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "One Area Address as reported in IIH PDUs received from + the neighbor." + ::= { isisISAdjAreaAddrEntry 2 } + +-- The IS Adjacency IP Group + +-- The IS Adjacency IP Group is present if the system supports +-- IP Integrated IS-IS + +-- The IS Adjacency IP Address Table + +-- The IS Adjacency IP Address Table contains the +-- set of IP Addresses of neighboring Intermediate Systems +-- as reported in received IIH PDUs. + + isisISAdjIPAddrTable OBJECT-TYPE + SYNTAX SEQUENCE OF IsisISAdjIPAddrEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table contains the set of IP Addresses of + neighboring Intermediate Systems as reported in received + IIH PDUs." + ::= { isisISAdj 3 } + + isisISAdjIPAddrEntry OBJECT-TYPE + SYNTAX IsisISAdjIPAddrEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Each entry contains one IP Address reported by a + neighboring Intermediate System in its IIH PDUs." + INDEX { isisSysInstance, + isisCircIndex, + isisISAdjIPAddrAdjIndex + } + ::= { isisISAdjIPAddrTable 1 } + + IsisISAdjIPAddrEntry ::= + SEQUENCE { + isisISAdjIPAddrAdjIndex + Integer32, + isisISAdjIPAddressType + InetAddressType, + isisISAdjIPAddress + InetAddress + } + + isisISAdjIPAddrAdjIndex OBJECT-TYPE + SYNTAX Integer32 (1..2000000000) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The identifier of the IS adjacency to which this entry + belongs." + ::= { isisISAdjIPAddrEntry 1 } + + isisISAdjIPAddressType OBJECT-TYPE + SYNTAX InetAddressType + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The type of one IP Address as reported in IIH PDUs + received from the neighbor." + ::= { isisISAdjIPAddrEntry 2 } + + isisISAdjIPAddress OBJECT-TYPE + SYNTAX InetAddress (SIZE(4|16)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "One IP Address as reported in IIH PDUs received from the + neighbor." + ::= { isisISAdjIPAddrEntry 3 } +-- The IS Adjacency Integrated Group +-- +-- The IS Adjacency Integrated Group is present if the system +-- supports Integrated ISIS. +-- +-- +-- The IS Adjacency Protocol Supported Table +-- +-- The IS Adjacency Protocol Supported Table contains the set of +-- protocols supported by neighboring +-- Intermediate Systems as reported in received IIH PDUs. +-- + isisISAdjProtSuppTable OBJECT-TYPE + SYNTAX SEQUENCE OF IsisISAdjProtSuppEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table contains the set of protocols supported by + neighboring Intermediate Systems as reported in received + IIH PDUs." + ::= { isisISAdj 4 } + + isisISAdjProtSuppEntry OBJECT-TYPE + SYNTAX IsisISAdjProtSuppEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Each entry contains one protocol supported by a + neighboring Intermediate System as reported in its IIH + PDUs." + INDEX { isisSysInstance, + isisCircIndex, + isisISAdjProtSuppAdjIndex, + isisISAdjProtSuppProtocol } + ::= { isisISAdjProtSuppTable 1 } + + IsisISAdjProtSuppEntry ::= + SEQUENCE { + isisISAdjProtSuppAdjIndex + Integer32, + isisISAdjProtSuppProtocol + SupportedProtocol + } + + isisISAdjProtSuppAdjIndex OBJECT-TYPE + SYNTAX Integer32 (1..2000000000) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The identifier the IS adjacency to which this entry + corresponds." + ::= { isisISAdjProtSuppEntry 1 } + + isisISAdjProtSuppProtocol OBJECT-TYPE + SYNTAX SupportedProtocol + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "One supported protocol as reported in IIH PDUs received + from the neighbor." + ::= { isisISAdjProtSuppEntry 2 } +-- +-- +-- The ES Adjacency Group +-- +-- The ES Adjacency Group is present if the system supports +-- reception of ES Hellos +-- The ES Adjacency Table +-- +-- This table is not implemented - jdp +-- +-- +-- The Reachable Address Group +-- +-- The Reachable Address Group is optional. +-- The Reachable Address Table +-- Each entry records information about a reachable address +-- (NSAP or address prefix) manually configured on the system +-- or learned through another protocol. + + isisRATable OBJECT-TYPE + SYNTAX SEQUENCE OF IsisRAEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The table of Reachable Addresses to NSAPs or Address + Prefixes." + ::= { isisReachAddr 1 } + + isisRAEntry OBJECT-TYPE + SYNTAX IsisRAEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Each entry defines a Reachable Address to a NSAP or + Address Prefix." + INDEX { isisSysInstance, + isisCircIndex, + isisRAIndex } + ::= { isisRATable 1 } + IsisRAEntry ::= + SEQUENCE { + isisRAIndex + Integer32, + isisRAExistState + RowStatus, + isisRAAdminState + AdminState, + isisRAAddrPrefix + NSAPPrefix, + isisRAMapType + INTEGER, + isisRADefMetric + DefaultMetric, + isisRADefMetricType + MetricType, + isisRASNPAAddress + SNPAAddress, + isisRASNPAMask + SNPAPrefix, + isisRASNPAPrefix + SNPAPrefix, + isisRAType + INTEGER + } + + isisRAIndex OBJECT-TYPE + SYNTAX Integer32 (1..2000000000) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The identifier for this isisRAEntry. This value must be + unique amongst all Reachable Addresses on the same parent + Circuit. This object follows the index and + manualOrAutomatic behaviours." + ::= { isisRAEntry 1 } + + isisRAExistState OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The existence state of this Reachable Address. This + object follows the Row Status behaviours." + DEFVAL { active } + ::= { isisRAEntry 2 } + + isisRAAdminState OBJECT-TYPE + SYNTAX AdminState + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The administrative state of the Reachable Address. This + object follows the AdminState and manualOrAutomatic + behaviours." + DEFVAL { off } + ::= { isisRAEntry 3 } + + isisRAAddrPrefix OBJECT-TYPE + SYNTAX NSAPPrefix + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The destination of this Reachable Address. This is an + Address Prefix. This object follows the + replaceOnlyWhileDisabled and manualOrAutomatic + behaviours." + REFERENCE "ISIS.aoi addressPrefix (98)" + ::= { isisRAEntry 4 } + + isisRAMapType OBJECT-TYPE + SYNTAX INTEGER { + none (1), + explicit (2), + extractIDI (3), + extractDSP (4) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The type of mapping to be employed to ascertain the SNPA + Address which should be used in forwarding PDUs for this + Reachable Address prefix. This object follows the + manualOrAutomatic behaviour. The following values of + mapping type are defined: + none: The mapping is null because the neighbor SNPA is + implicit by nature of the subnetwork (e.g. a + point-to-point linkage). + explicit: The subnetwork addresses in the object + isisRASNPAAddress is to be used. + extractIDI: The SNPA is embedded in the IDI of the + destination NSAP Address. The mapping algorithm + extracts the SNPA to be used according to the format + and encoding rules of ISO8473/Add2. This SNPA + extraction algorithm can be used in conjunction with + Reachable Address prefixes from the X.121, F.69, E.163 + and E.164 addressing subdomains. + extractDSP: All, or a suffix, of the SNPA is embedded + in the DSP of the destination address. This SNPA + extraction algorithm extracts the embedded subnetwork + addressing information by performing a logical AND of + the isisRASNPAMask object value with the destination + address. The part of the SNPA extracted from the + destination NSAP is appended to the isisRASNPAPrefix + object value to form the next hop subnetwork + addressing information." + REFERENCE "ISO10589-ISIS.aoi mappingType (107)" + ::= { isisRAEntry 5 } + + isisRADefMetric OBJECT-TYPE + SYNTAX DefaultMetric + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The default metric value for reaching the specified + prefix over this circuit. This object follows the + manualOrAutomatic behaviour." + REFERENCE "ISIS.aoi DefaultMetric (99)" + DEFVAL { 20 } + ::= { isisRAEntry 6 } + + isisRADefMetricType OBJECT-TYPE + SYNTAX MetricType + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Indicates whether the default metric is internal or + external. This object follows the manualOrAutomatic + behaviour." + REFERENCE "ISIS.aoi DefaultMetricType (103)" + DEFVAL { internal } + ::= { isisRAEntry 7 } + + isisRASNPAAddress OBJECT-TYPE + SYNTAX SNPAAddress + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The SNPA Address to which a PDU may be forwarded in + order to reach a destination which matches the address + prefix of the Reachable Address. This object follows the + manualOrAutomatic behaviour." + REFERENCE "ISIS.aoi sNPAAddresses (109)" +-- note only one address may be specified per Reachable Address +-- in the MIB + DEFVAL { ''H } + ::= { isisRAEntry 8 } + + isisRASNPAMask OBJECT-TYPE + SYNTAX SNPAPrefix + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "A bit mask with 1 bits indicating the positions in the + effective destination address from which embedded SNPA + information is to be extracted. For the extraction the + first octet of the isisRASNPAMask object value is aligned + with the first octet (AFI) of the NSAP Address. If the + isisRASNPAMask object value and NSAP Address are of + different lengths, the shorter of the two is logically + padded with zeros before performing the extraction. This + object follows the manualOrAutomatic behaviour." + REFERENCE "ISIS.aoi sNPAMask (122)" + DEFVAL { '00'H } + ::= { isisRAEntry 9 } + + isisRASNPAPrefix OBJECT-TYPE + SYNTAX SNPAPrefix + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "A fixed SNPA prefix for use when the isisRAMapType is + extractDSP. The SNPA Address to use is formed by + concatenating the fixed SNPA prefix with a variable SNPA + part that is extracted from the effective destination + address. For Reachable Address prefixes in which the + entire SNPA is embedded in the DSP the SNPA Prefix shall + be null. This object follows the manualOrAutomatic + behaviour." + REFERENCE "ISIS.aoi sNPAPrefix (123)" + DEFVAL { '00'H } + ::= { isisRAEntry 10 } + + + isisRAType OBJECT-TYPE + SYNTAX INTEGER + { + manual (1), + automatic (2) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + " The type of Reachable address. Those of type + manual are created by the network manager. Those + of type automatic are created through propogation + of routing information from another routing + protocol (eg. IDRP). " + DEFVAL {manual} + ::= {isisRAEntry 11 } + +-- The IP Reachable Address Group + +-- The IP Reachable Address Group is optional. + + +-- The IP Reachable Address Table + +-- Each entry records information about one IP reachable +-- address manually configured on this system or learned from +-- another protocol. + + isisIPRATable OBJECT-TYPE + SYNTAX SEQUENCE OF IsisIPRAEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The table of IP Reachable Addresses to networks, + subnetworks or hosts either manually configured or + learned from another protocol." + ::= { isisIPReachAddr 1 } + + isisIPRAEntry OBJECT-TYPE + SYNTAX IsisIPRAEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Each entry defines an IP Reachable Address to a network, + subnetwork or host." + INDEX { + isisSysInstance, + isisCircIndex, + isisIPRAType, + isisIPRAIndex + } + ::= { isisIPRATable 1 } + + IsisIPRAEntry ::= + SEQUENCE { + isisIPRAIndex + Integer32, + isisIPRAType + INTEGER, + isisIPRADestType + InetAddressType, + isisIPRADest + InetAddress, + isisIPRADestPrefixLen + InetAddressPrefixLength, + isisIPRAExistState + RowStatus, + isisIPRAAdminState + AdminState, + isisIPRADefMetric + DefaultMetric, + isisIPRADefMetricType + MetricType, + isisIPRASNPAAddress + SNPAAddress + } + + isisIPRAIndex OBJECT-TYPE + SYNTAX Integer32 (1..2000000000) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The identifier for this isisIPRAEntry. This value must + be unique amongst all IP Reachable Addresses on the same + parent Circuit. This object follows the index and + manualOrAutomatic behaviours." + ::= { isisIPRAEntry 1 } + + isisIPRAType OBJECT-TYPE + SYNTAX INTEGER + { + manual (1), + automatic (2) + } + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The type of this IP Reachable Address. Those of type + manual are created by the network manager. Those of type + automatic are created through propagation of routing + information from another routing protocol." + ::= { isisIPRAEntry 2 } + isisIPRADestType OBJECT-TYPE + SYNTAX InetAddressType + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The type of this IP Reachable Address." + ::= { isisIPRAEntry 3 } + + isisIPRADest OBJECT-TYPE + SYNTAX InetAddress (SIZE(4|16)) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The destination of this IP Reachable Address. This is + either a network address, subnetwork address or host + address. This object follows the manualOrAutomatic + behaviour." + ::= { isisIPRAEntry 4 } + + isisIPRADestPrefixLen OBJECT-TYPE + SYNTAX InetAddressPrefixLength (0..128) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The length of the IP Netmask for Reachability Address." + ::= { isisIPRAEntry 5 } + + isisIPRAExistState OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The state of this IP Reachable Address. This object + follows the ExistenceState and manualOrAutomatic + behaviours." + DEFVAL { active } + ::= { isisIPRAEntry 6 } + + isisIPRAAdminState OBJECT-TYPE + SYNTAX AdminState + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The administrative state of the IP Reachable Address. This + object follows the AdminState and manualOrAutomatic + behaviours." + DEFVAL { off } + ::= { isisIPRAEntry 7 } + + isisIPRADefMetric OBJECT-TYPE + SYNTAX DefaultMetric + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The default metric value for reaching the specified + destination over this circuit. This object follows the + manualOrAutomatic behaviour." + DEFVAL { 20 } + ::= { isisIPRAEntry 8 } + + isisIPRADefMetricType OBJECT-TYPE + SYNTAX MetricType + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Indicates whether the default metric is internal or + external. This object follows the manualOrAutomatic + behaviour." + DEFVAL { internal } + ::= { isisIPRAEntry 9 } + + isisIPRASNPAAddress OBJECT-TYPE + SYNTAX SNPAAddress + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The SNPA Address to which a PDU may be forwarded in + order to reach a destination which matches this IP + Reachable Address. This object follows the + manualOrAutomatic behaviour." + DEFVAL { ''H } + ::= { isisIPRAEntry 10 } + +-- The Circuit CLNS Group +-- +-- The Circuit CLNS Table contains objects controlling the +-- operation of the IS functions of the CLNS protocol +-- +-- This table is not implemented - jdp +-- + +-- The IP Destination Group + +-- The IP Destination Group is present if the system forwards +-- IP packets. +-- The IP Destination Table + +-- The IP Destination Table records information about each +-- destination known to the Intermediate System + +-- Removed: overlaps RFC 2096 - jdp + +-- Conformance Definitions + + +isisGroups OBJECT IDENTIFIER ::= { isisConformance 1 } +isisCompliances OBJECT IDENTIFIER ::= { isisConformance 2 } + +-- compliance statements + +isisCompliance MODULE-COMPLIANCE + STATUS current + DESCRIPTION + "The compiance statement for agents that support + the ISIS MIB" + MODULE -- this module + MANDATORY-GROUPS { + isisSystemGroup, + isisCircuitGroup, + isisISAdjGroup + } + ::= { isisCompliances 1 } + +-- MIB Grouping + + isisSystemGroup OBJECT-GROUP + OBJECTS { + isisSysVersion, + isisSysType, + isisSysID, + isisSysMaxPathSplits, + isisSysMaxLSPGenInt, + isisSysOrigL1LSPBuffSize, + isisSysMaxAreaAddresses, + isisSysMinL1LSPGenInt, + isisSysMinL2LSPGenInt, + isisSysPollESHelloRate, + isisSysWaitTime, + isisSysAdminState, + isisSysL1State, + isisSysCorrLSPs, + isisSysLSPL1DbaseOloads, + isisSysManAddrDropFromAreas, isisSysAttmptToExMaxSeqNums, + isisSysSeqNumSkips, + isisSysOwnLSPPurges, + isisSysIDFieldLenMismatches, + isisSysMaxAreaAddrMismatches, + isisSysOrigL2LSPBuffSize, + isisSysL2State, + isisSysLSPL2DbaseOloads, + isisSysAuthFails, + isisSysLSPIgnoreErrors, + isisSysLogAdjacencyChanges, + isisSysPartChanges, + isisSysMaxAreaCheck, + isisSysNextCircIndex, + isisSysExistState, + isisSysL2toL1Leaking, + isisSysSetOverload, + isisManAreaAddrExistState, + isisAreaAddr, + isisSysProtSuppExistState, + isisSummAddrExistState, + isisSummAddrAdminState, + isisSummAddrDefaultMetric + } + STATUS current + DESCRIPTION + "The collections of objects used to manage an IS-IS router." + ::= { isisGroups 1 } + + isisCircuitGroup OBJECT-GROUP + OBJECTS { + isisCircIfSubIndex, + isisCircLocalID, + isisCircAdminState, + isisCircExistState, + isisCircType, + isisCircExtDomain, + isisCircAdjChanges, + isisCircInitFails, + isisCircRejAdjs, + isisCircOutCtrlPDUs, + isisCircInCtrlPDUs, + isisCircIDFieldLenMismatches, + isisCircLevel, + isisCircMCAddr, + isisCircPtToPtCircID, + isisCircPassiveCircuit, + isisCircMeshGroupEnabled, + isisCircMeshGroup, + isisCircSmallHellos, + isisCircUpTime, + isisCircIfIndex, + isisCircLevelDefaultMetric, + isisCircLevelISPriority, + isisCircLevelCircID, + isisCircLevelDesIS, + isisCircLevelLANDesISChanges , + isisCircLevelHelloMultiplier, + isisCircLevelHelloTimer, + isisCircLevelDRHelloTimer, + isisCircLevelLSPThrottle, + isisCircLevelMinLSPRetransInt, + isisCircLevelCSNPInterval, + isisCircLevelPartSNPInterval + } + STATUS current + DESCRIPTION + "The collection of objects used to describe in IS-IS Circuit." + ::= { isisGroups 2 } + + isisISAdjGroup OBJECT-GROUP + OBJECTS { + isisISAdjState, + isisISAdjNeighSNPAAddress, + isisISAdjNeighSysType, + isisISAdjNeighSysID, + isisISAdjUsage, + isisISAdjHoldTimer, + isisISAdjNeighPriority, + isisISAdjUpTime, + isisISAdjAreaAddress, + isisISAdjIPAddressType, + isisISAdjIPAddress, + isisISAdjProtSuppProtocol + } + STATUS current + DESCRIPTION + "The collections of objects used to manage an IS-IS Adjacency." + ::= { isisGroups 3 } + + isisISPDUCounterGroup OBJECT-GROUP + OBJECTS { + isisPacketCountHello, + isisPacketCountLSP, + isisPacketCountCSNP, + isisPacketCountPSNP + } + STATUS current + DESCRIPTION + "The collections of objects used to count various protocol PDUs." + ::= { isisGroups 4 } + + isisRATableGroup OBJECT-GROUP + OBJECTS { + isisRAExistState, + isisRAAdminState, + isisRAAddrPrefix, + isisRAMapType, + isisRADefMetric, + isisRADefMetricType, + isisRASNPAAddress, + isisRASNPAMask, + isisRASNPAPrefix, + isisRAType + } + STATUS current + DESCRIPTION + "The collections of objects used to manage the reachable NSAP prefixes." + ::= { isisGroups 5 } + + isisISIPRADestGroup OBJECT-GROUP + OBJECTS { + isisIPRADestType, + isisIPRADest, + isisIPRADestPrefixLen, + isisIPRAExistState, + isisIPRAAdminState, + isisIPRADefMetric, + isisIPRADefMetricType, + isisIPRASNPAAddress + } + STATUS current + DESCRIPTION + "The collections of objects used to manage configured IP addresses." + ::= { isisGroups 6 } + + END + |