Initial commitHEADmain

1 files changed, 1361 insertions, 0 deletions

diff --git a/MIBS/nokia/IPX b/MIBS/nokia/IPX
new file mode 100644
index 0000000..ca52acd
--- /dev/null
+++ b/MIBS/nokia/IPX
@@ -0,0 +1,1361 @@
+IPX DEFINITIONS ::= BEGIN
+
+-- This MIB defines the management information for a system using the IPX
+-- protocol.  The MIB consists of four groups:
+--
+--    1.  System Group - contains general information about all instances
+--                       of IPX on the system
+--
+--    2.  Circuit Group - contains information about all circuits used by
+--                        IPX on the system
+--
+--    3.  Forwarding Group - contains generic routing information that
+--                           must be provided by any IPX routing protocol.
+--
+--    4.  Services Group - contains information about all known services.
+--
+-- The MIB is designed to support multiple instances of the IPX
+-- protocol on one system via a system instance identifier which is the
+-- primary index for every table in this MIB.
+--
+-- This MIB is designed to provide a basic framework for the management
+-- of systems implementing the IPX protocol.  Additional MIBs may be
+-- created (especially in the area of IPX routing protocols) to contain
+-- more specific information.  Whenever possible, these additional MIBs
+-- should follow the format of this IPX MIB.  Information in these MIBs
+-- should be linked to this MIB via the use of the system instance 
+-- identifier mentioned above.
+--
+--
+-- Changes:
+--
+--    4/15/94:  Cleanup of some typographical errors
+--
+--    4/21/94:  Change ipxCircNetNumber acces to read-write
+
+
+IMPORTS
+        enterprises, Counter32, OBJECT-TYPE 
+                FROM SNMPv2-SMI 
+        TRAP-TYPE
+                FROM RFC-1215
+        PhysAddress
+                FROM SNMPv2-TC;
+
+novell  OBJECT IDENTIFIER ::= { enterprises 23 }
+mibDoc  OBJECT IDENTIFIER ::= { novell 2 }
+ipx     OBJECT IDENTIFIER ::= { mibDoc 5 }
+
+
+-- Groups
+
+ipxSystem OBJECT IDENTIFIER ::= {ipx 1}
+ipxCircuit OBJECT IDENTIFIER ::= {ipx 2}
+ipxForwarding OBJECT IDENTIFIER ::= {ipx 3}
+ipxServices OBJECT IDENTIFIER ::= {ipx 4}
+ipxTraps OBJECT IDENTIFIER ::= {ipx 5}
+
+-- Types
+
+NetNumber ::= OCTET STRING (SIZE(4))
+
+-- System Group
+--   This group contains global information about each instance of IPX
+--   running on one system.
+
+-- Basic System Table
+--   This table contains one entry for each instance of IPX running on
+--   the system.  It contains the management information that should
+--   be made available by all implementations of the IPX protocol.
+
+ipxBasicSysTable OBJECT-TYPE
+   SYNTAX      SEQUENCE OF IPXBasicSysEntry
+   MAX-ACCESS      not-accessible
+   STATUS      current
+   DESCRIPTION "The IPX System table - basic information."
+   ::= {ipxSystem 1}
+
+ipxBasicSysEntry OBJECT-TYPE
+   SYNTAX      IPXBasicSysEntry
+   MAX-ACCESS      not-accessible
+   STATUS      current
+   DESCRIPTION "Each entry corresponds to one instance of IPX running
+                on the system."
+   INDEX       {ipxBasicSysInstance}
+   ::= {ipxBasicSysTable 1}
+
+IPXBasicSysEntry ::= SEQUENCE {
+                        ipxBasicSysInstance
+                           INTEGER,
+                        ipxBasicSysExistState
+                           INTEGER,
+                        ipxBasicSysNetNumber
+                           NetNumber,
+                        ipxBasicSysNode
+                           OCTET STRING,
+                        ipxBasicSysName
+                           OCTET STRING,
+                        ipxBasicSysInReceives
+                           Counter32,
+                        ipxBasicSysInHdrErrors
+                           Counter32,
+                        ipxBasicSysInUnknownSockets
+                           Counter32,
+                        ipxBasicSysInDiscards
+                           Counter32,
+                        ipxBasicSysInBadChecksums
+                           Counter32,
+                        ipxBasicSysInDelivers
+                           Counter32,
+                        ipxBasicSysNoRoutes
+                           Counter32,
+                        ipxBasicSysOutRequests
+                           Counter32,
+                        ipxBasicSysOutMalformedRequests
+                           Counter32,
+                        ipxBasicSysOutDiscards
+                           Counter32,
+                        ipxBasicSysOutPackets
+                           Counter32,
+                        ipxBasicSysConfigSockets
+                           INTEGER,
+                        ipxBasicSysOpenSocketFails
+                           Counter32
+                    }
+                           
+ipxBasicSysInstance OBJECT-TYPE
+   SYNTAX      INTEGER
+   MAX-ACCESS      read-write
+   STATUS      current
+   DESCRIPTION "The unique identifier of the instance of IPX to which this
+                row corresponds.  This value may be written only when
+                creating a new entry in the table."
+   ::= {ipxBasicSysEntry 1}
+
+ipxBasicSysExistState OBJECT-TYPE
+   SYNTAX      INTEGER {
+                        off(1),
+                        on(2)
+                       }
+   MAX-ACCESS      read-write
+   STATUS      current
+   DESCRIPTION "The validity of this entry in the IPX system table.
+                Setting this field to off indicates that this entry may be
+                deleted from the system table at the IPX implementation's
+                discretion."
+   ::= {ipxBasicSysEntry 2}
+
+ipxBasicSysNetNumber OBJECT-TYPE
+   SYNTAX      NetNumber
+   MAX-ACCESS      read-write
+   STATUS      current
+   DESCRIPTION "The network number portion of the IPX address of this
+                system."
+   ::= {ipxBasicSysEntry 3}
+
+ipxBasicSysNode OBJECT-TYPE
+   SYNTAX      OCTET STRING (SIZE(6))
+   MAX-ACCESS      read-write
+   STATUS      current
+   DESCRIPTION "The node number portion of the IPX address of this
+                system."
+   ::= {ipxBasicSysEntry 4}
+
+ipxBasicSysName OBJECT-TYPE
+   SYNTAX      OCTET STRING (SIZE(0..48))
+   MAX-ACCESS      read-write
+   STATUS      current
+   DESCRIPTION "The readable name for this system."
+   ::= {ipxBasicSysEntry 5}
+
+ipxBasicSysInReceives OBJECT-TYPE
+   SYNTAX      Counter32
+   MAX-ACCESS      read-only
+   STATUS      current
+   DESCRIPTION "The total number of IPX packets received, including
+                those received in error."
+   ::= {ipxBasicSysEntry 6}
+
+ipxBasicSysInHdrErrors OBJECT-TYPE
+   SYNTAX      Counter32
+   MAX-ACCESS      read-only
+   STATUS      current
+   DESCRIPTION "The number of IPX packets discarded due to errors in
+                their headers, including any IPX packet with a size less
+                than the minimum of 30 bytes."
+   ::= {ipxBasicSysEntry 7}
+
+ipxBasicSysInUnknownSockets OBJECT-TYPE
+   SYNTAX      Counter32
+   MAX-ACCESS      read-only
+   STATUS      current
+   DESCRIPTION "The number of IPX packets discarded because the
+                destination socket was not open."
+   ::= {ipxBasicSysEntry 8}
+
+ipxBasicSysInDiscards OBJECT-TYPE
+   SYNTAX      Counter32
+   MAX-ACCESS      read-only
+   STATUS      current
+   DESCRIPTION "The number of IPX packets received but discarded due to
+                reasons other than those accounted for by 
+                ipxBasicSysInHdrErrors, ipxBasicSysInUnknownSockets,
+                ipxAdvSysInDiscards, and ipxAdvSysInCompressDiscards."
+   ::= {ipxBasicSysEntry 9}
+
+ipxBasicSysInBadChecksums OBJECT-TYPE
+   SYNTAX      Counter32
+   MAX-ACCESS      read-only
+   STATUS      current
+   DESCRIPTION "The number of IPX packets received with incorrect
+                checksums."
+   ::= {ipxBasicSysEntry 10}
+
+ipxBasicSysInDelivers OBJECT-TYPE
+   SYNTAX      Counter32
+   MAX-ACCESS      read-only
+   STATUS      current
+   DESCRIPTION "The total number of IPX packets delivered locally,
+                including packets from local applications."
+   ::= {ipxBasicSysEntry 11}
+
+ipxBasicSysNoRoutes OBJECT-TYPE
+   SYNTAX      Counter32
+   MAX-ACCESS      read-only
+   STATUS      current
+   DESCRIPTION "The number of times no route to a destination was
+                found."
+   ::= {ipxBasicSysEntry 12}
+
+ipxBasicSysOutRequests OBJECT-TYPE
+   SYNTAX      Counter32
+   MAX-ACCESS      read-only
+   STATUS      current
+   DESCRIPTION "The number of IPX packets supplied locally for
+                transmission, not including any packets counted in
+                ipxAdvForwPackets."
+   ::= {ipxBasicSysEntry 13}
+
+ipxBasicSysOutMalformedRequests OBJECT-TYPE
+   SYNTAX      Counter32
+   MAX-ACCESS      read-only
+   STATUS      current
+   DESCRIPTION "The number of IPX packets supplied locally that contained
+                errors in their structure."
+   ::= {ipxBasicSysEntry 14}
+
+ipxBasicSysOutDiscards OBJECT-TYPE
+   SYNTAX      Counter32
+   MAX-ACCESS      read-only
+   STATUS      current
+   DESCRIPTION "The number of outgoing IPX packets discarded due to
+                reasons other than those accounted for in
+                ipxBasicSysOutMalformedRequests, ipxAdvSysOutFiltered,
+                and ipxAdvSysOutCompressDiscards."
+   ::= {ipxBasicSysEntry 15}
+
+ipxBasicSysOutPackets OBJECT-TYPE
+   SYNTAX      Counter32
+   MAX-ACCESS      read-only
+   STATUS      current
+   DESCRIPTION "The total number of IPX packets transmitted."
+   ::= {ipxBasicSysEntry 16}
+
+ipxBasicSysConfigSockets OBJECT-TYPE
+   SYNTAX      INTEGER
+   MAX-ACCESS      read-only
+   STATUS      current
+   DESCRIPTION "The configured maximum number of IPX sockets that may be
+                open at one time."
+   ::= {ipxBasicSysEntry 17}
+
+ipxBasicSysOpenSocketFails OBJECT-TYPE
+   SYNTAX      Counter32
+   MAX-ACCESS      read-only
+   STATUS      current
+   DESCRIPTION "The number of IPX socket open calls which failed."
+   ::= {ipxBasicSysEntry 18}
+
+
+-- Advanced System Table
+--   This table contains one entry for each instance of IPX running on
+--   the system.  It contains the advanced management information that
+--   may not be available from all implementations of the IPX protocol.
+
+ipxAdvSysTable OBJECT-TYPE
+   SYNTAX      SEQUENCE OF IPXAdvSysEntry
+   MAX-ACCESS      not-accessible
+   STATUS      current
+   DESCRIPTION "The IPX System table - advanced information."
+   ::= {ipxSystem 2}
+
+ipxAdvSysEntry OBJECT-TYPE
+   SYNTAX      IPXAdvSysEntry
+   MAX-ACCESS      not-accessible
+   STATUS      current
+   DESCRIPTION "Each entry corresponds to one instance of IPX running
+                on the system."
+   INDEX       {ipxAdvSysInstance}
+   ::= {ipxAdvSysTable 1}
+
+IPXAdvSysEntry ::= SEQUENCE {
+                     ipxAdvSysInstance
+                        INTEGER,
+                     ipxAdvSysMaxPathSplits
+                        INTEGER,
+                     ipxAdvSysMaxHops
+                        INTEGER,
+                     ipxAdvSysInTooManyHops
+                        Counter32,
+                     ipxAdvSysInFiltered
+                        Counter32,
+                     ipxAdvSysInCompressDiscards
+                        Counter32,
+                     ipxAdvSysNETBIOSPackets
+                        Counter32,
+                     ipxAdvSysForwPackets
+                        Counter32,
+                     ipxAdvSysOutFiltered
+                        Counter32,
+                     ipxAdvSysOutCompressDiscards
+                        Counter32,
+                     ipxAdvSysCircCount
+                        INTEGER,
+                     ipxAdvSysDestCount
+                        INTEGER,
+                     ipxAdvSysServCount
+                        INTEGER
+                    }
+                           
+ipxAdvSysInstance OBJECT-TYPE
+   SYNTAX      INTEGER
+   MAX-ACCESS      read-write
+   STATUS      current
+   DESCRIPTION "The unique identifier of the instance of IPX to which this
+                row corresponds.  This value may be written only when
+                creating a new entry in the table."
+   ::= {ipxAdvSysEntry 1}
+
+ipxAdvSysMaxPathSplits OBJECT-TYPE
+   SYNTAX      INTEGER (1..32)
+   MAX-ACCESS      read-write
+   STATUS      current
+   DESCRIPTION "The maximum number of paths with equal routing metric
+                value which this instance of the IPX may split
+                between when forwarding packets."
+   DEFVAL      { 1 }
+   ::= {ipxAdvSysEntry 2}
+
+ipxAdvSysMaxHops OBJECT-TYPE
+   SYNTAX      INTEGER
+   MAX-ACCESS      read-write
+   STATUS      current
+   DESCRIPTION "The maximum number of hops a packet may take."
+   DEFVAL      { 64 }
+   ::= {ipxAdvSysEntry 3}
+
+ipxAdvSysInTooManyHops OBJECT-TYPE
+   SYNTAX      Counter32
+   MAX-ACCESS      read-only
+   STATUS      current
+   DESCRIPTION "The number of IPX packets discarded due to exceeding the
+                maximum hop count."
+   ::= {ipxAdvSysEntry 4}
+
+ipxAdvSysInFiltered OBJECT-TYPE
+   SYNTAX      Counter32
+   MAX-ACCESS      read-only
+   STATUS      current
+   DESCRIPTION "The number of incoming IPX packets discarded due to
+                filtering."
+   ::= {ipxAdvSysEntry 5}
+
+ipxAdvSysInCompressDiscards OBJECT-TYPE
+   SYNTAX      Counter32
+   MAX-ACCESS      read-only
+   STATUS      current
+   DESCRIPTION "The number of incoming IPX packets discarded due to
+                decompression errors."
+   ::= {ipxAdvSysEntry 6}
+
+ipxAdvSysNETBIOSPackets OBJECT-TYPE
+   SYNTAX      Counter32
+   MAX-ACCESS      read-only
+   STATUS      current
+   DESCRIPTION "The number of NETBIOS packets received."
+   ::= {ipxAdvSysEntry 7}
+
+ipxAdvSysForwPackets OBJECT-TYPE
+   SYNTAX      Counter32
+   MAX-ACCESS      read-only
+   STATUS      current
+   DESCRIPTION "The number of IPX packets forwarded."
+   ::= {ipxAdvSysEntry 8}
+
+ipxAdvSysOutFiltered OBJECT-TYPE
+   SYNTAX      Counter32
+   MAX-ACCESS      read-only
+   STATUS      current
+   DESCRIPTION "The number of outgoing IPX packets discarded due to
+                filtering."
+   ::= {ipxAdvSysEntry 9}
+
+ipxAdvSysOutCompressDiscards OBJECT-TYPE
+   SYNTAX      Counter32
+   MAX-ACCESS      read-only
+   STATUS      current
+   DESCRIPTION "The number of outgoing IPX packets discarded due to
+                compression errors."
+   ::= {ipxAdvSysEntry 10}
+
+ipxAdvSysCircCount OBJECT-TYPE
+   SYNTAX      INTEGER
+   MAX-ACCESS      read-only
+   STATUS      current
+   DESCRIPTION "The number of circuits known to this instance of IPX."
+   ::= {ipxAdvSysEntry 11}
+
+ipxAdvSysDestCount OBJECT-TYPE
+   SYNTAX      INTEGER
+   MAX-ACCESS      read-only
+   STATUS      current
+   DESCRIPTION "The number of currently reachable destinations known to
+                this instance of IPX."
+   ::= {ipxAdvSysEntry 12}
+
+ipxAdvSysServCount OBJECT-TYPE
+   SYNTAX      INTEGER
+   MAX-ACCESS      read-only
+   STATUS      current
+   DESCRIPTION "The number of services known to this instance of IPX."
+   ::= {ipxAdvSysEntry 13}
+
+
+-- Circuit Group
+--   This group contains management information for each circuit known
+--   to this system.
+
+-- Circuit Table
+--   The Circuit table contains an entry for each circuit known to the
+--   system.
+
+ipxCircTable OBJECT-TYPE
+   SYNTAX      SEQUENCE OF IPXCircEntry
+   MAX-ACCESS      not-accessible
+   STATUS      current
+   DESCRIPTION "The Circuit table."
+   ::= {ipxCircuit 1}
+
+ipxCircEntry OBJECT-TYPE
+   SYNTAX      IPXCircEntry
+   MAX-ACCESS      not-accessible
+   STATUS      current
+   DESCRIPTION "Each entry corresponds to one circuit known to the
+                system."
+   INDEX       {
+                ipxCircSysInstance,
+                ipxCircIndex
+               }
+   ::= {ipxCircTable 1}
+
+IPXCircEntry ::= SEQUENCE {
+                     ipxCircSysInstance
+                        INTEGER,
+                     ipxCircIndex
+                        INTEGER,
+                     ipxCircExistState
+                        INTEGER,
+                     ipxCircOperState
+                        INTEGER,
+                     ipxCircIfIndex
+                        INTEGER,
+                     ipxCircName
+                        OCTET STRING,
+                     ipxCircType
+                        INTEGER,
+                     ipxCircDialName
+                        OCTET STRING,
+                     ipxCircLocalMaxPacketSize
+                        INTEGER,
+                     ipxCircCompressState
+                        INTEGER,
+                     ipxCircCompressSlots
+                        INTEGER,
+                     ipxCircStaticStatus
+                        INTEGER,
+                     ipxCircCompressedSent
+                        Counter32,
+                     ipxCircCompressedInitSent
+                        Counter32,
+                     ipxCircCompressedRejectsSent
+                        Counter32,
+                     ipxCircUncompressedSent
+                        Counter32,
+                     ipxCircCompressedReceived
+                        Counter32,
+                     ipxCircCompressedInitReceived
+                        Counter32,
+                     ipxCircCompressedRejectsReceived
+                        Counter32,
+                     ipxCircUncompressedReceived
+                        Counter32,
+                     ipxCircMediaType
+                        OCTET STRING,
+                     ipxCircNetNumber
+                        NetNumber,
+                     ipxCircStateChanges
+                        Counter32,
+                     ipxCircInitFails
+                        Counter32,
+                     ipxCircDelay
+                        INTEGER,
+                     ipxCircThroughput
+                        INTEGER,
+                     ipxCircNeighRouterName
+                        OCTET STRING,
+                     ipxCircNeighInternalNetNum
+                        NetNumber
+                    }
+
+ipxCircSysInstance OBJECT-TYPE
+   SYNTAX      INTEGER
+   MAX-ACCESS      read-write
+   STATUS      current
+   DESCRIPTION "The unique identifier of the instance of IPX
+                to which this entry corresponds.  This value may be 
+                written only when creating a new entry in the table."
+   ::= {ipxCircEntry 1}
+
+ipxCircIndex OBJECT-TYPE
+   SYNTAX      INTEGER
+   MAX-ACCESS      read-write
+   STATUS      current
+   DESCRIPTION "The identifier of this circuit, unique within the
+                instance of IPX.  This value may be written
+                only when creating a new entry in the table."
+   ::= {ipxCircEntry 2}
+
+ipxCircExistState OBJECT-TYPE
+   SYNTAX      INTEGER {
+                        off(1),
+                        on(2)
+                       }
+   MAX-ACCESS      read-write
+   STATUS      current
+   DESCRIPTION "The validity of this circuit entry.  A circuit with this
+                value set to off may be deleted from the table at the
+                IPX implementation's discretion."
+   ::= {ipxCircEntry 3}
+
+ipxCircOperState OBJECT-TYPE
+   SYNTAX      INTEGER {
+                        down(1),
+                        up(2),
+                        sleeping(3)
+                       }
+   MAX-ACCESS      read-write
+   STATUS      current
+   DESCRIPTION "The operational state of the circuit."
+   ::= {ipxCircEntry 4}
+
+ipxCircIfIndex OBJECT-TYPE
+   SYNTAX      INTEGER
+   MAX-ACCESS      read-write
+   STATUS      current
+   DESCRIPTION "The value of ifIndex for the interface used by this
+                circuit.  This value may be written only when creating
+                a new entry in the table."
+   ::= {ipxCircEntry 5}
+
+ipxCircName OBJECT-TYPE
+   SYNTAX      OCTET STRING (SIZE(0..48))
+   MAX-ACCESS      read-write
+   STATUS      current
+   DESCRIPTION "The readable name for the circuit."
+   ::= {ipxCircEntry 6}
+
+ipxCircType OBJECT-TYPE
+   SYNTAX      INTEGER {
+                        other(1),
+                        broadcast(2),
+                        ptToPt(3),
+                        wanRIP(4),
+                        unnumberedRIP(5),
+                        dynamic(6),
+                        wanWS(7)
+                       }
+   MAX-ACCESS      read-write
+   STATUS      current
+   DESCRIPTION "The type of the circuit."
+   ::= {ipxCircEntry 7}
+
+ipxCircDialName OBJECT-TYPE
+   SYNTAX      OCTET STRING (SIZE(0..48))
+   MAX-ACCESS      read-write
+   STATUS      current
+   DESCRIPTION "The symbolic name used to refernce the dialing information
+                used to create this circuit.  This value may be written 
+                only when creating a new entry in the table."
+   ::= {ipxCircEntry 8}
+
+ipxCircLocalMaxPacketSize OBJECT-TYPE
+   SYNTAX      INTEGER
+   MAX-ACCESS      read-write
+   STATUS      current
+   DESCRIPTION "The maximum size (including header), in bytes, that the
+                system supports locally on this circuit."
+   ::= {ipxCircEntry 9}
+
+ipxCircCompressState OBJECT-TYPE
+   SYNTAX      INTEGER {
+                        off(1),
+                        on(2)
+                       }
+   MAX-ACCESS      read-write
+   STATUS      current
+   DESCRIPTION "The compression state on this circuit.  This value may 
+                be written only when creating a new entry in the table."
+   DEFVAL      { off }
+   ::= {ipxCircEntry 10}
+
+ipxCircCompressSlots OBJECT-TYPE
+   SYNTAX      INTEGER
+   MAX-ACCESS      read-write
+   STATUS      current
+   DESCRIPTION "The number of compression slots available on this 
+                circuit.  This value may be written only when creating a
+                new entry in the table."
+   DEFVAL      { 16 }
+   ::= {ipxCircEntry 11}
+
+ipxCircStaticStatus OBJECT-TYPE
+   SYNTAX      INTEGER {
+                        unknown(1),
+                        current(2),
+                        changed(3),
+                        read(4),
+                        reading(5),
+                        write(6),
+                        writing(7)
+                       }
+   MAX-ACCESS      read-write
+   STATUS      current
+   DESCRIPTION "Indicates whether the information about static routes
+                and services reached via this circuit matches that
+                saved in permanent storage (current).  Setting the
+                value to write when it had the value changed will write
+                the currently in use information to permanent storage, 
+                if supported.  Setting the value to read when it had
+                the value changed will replace any routes and services
+                currently defined for the circuit with those read from
+                permanent storage, if supported."
+   ::= {ipxCircEntry 12}
+
+ipxCircCompressedSent OBJECT-TYPE
+   SYNTAX      Counter32
+   MAX-ACCESS      read-only
+   STATUS      current
+   DESCRIPTION "The number of compressed packets sent."
+   ::= {ipxCircEntry 13}
+
+ipxCircCompressedInitSent OBJECT-TYPE
+   SYNTAX      Counter32
+   MAX-ACCESS      read-only
+   STATUS      current
+   DESCRIPTION "The number of compression initialization packets sent."
+   ::= {ipxCircEntry 14}
+
+ipxCircCompressedRejectsSent OBJECT-TYPE
+   SYNTAX      Counter32
+   MAX-ACCESS      read-only
+   STATUS      current
+   DESCRIPTION "The number of compressed packet rejected packets sent."
+   ::= {ipxCircEntry 15}
+
+ipxCircUncompressedSent OBJECT-TYPE
+   SYNTAX      Counter32
+   MAX-ACCESS      read-only
+   STATUS      current
+   DESCRIPTION "The number of packets sent without being compressed
+                even though compression was turned on for this circuit."
+   ::= {ipxCircEntry 16}
+
+ipxCircCompressedReceived OBJECT-TYPE
+   SYNTAX      Counter32
+   MAX-ACCESS      read-only
+   STATUS      current
+   DESCRIPTION "The number of compressed packets received."
+   ::= {ipxCircEntry 17}
+
+ipxCircCompressedInitReceived OBJECT-TYPE
+   SYNTAX      Counter32
+   MAX-ACCESS      read-only
+   STATUS      current
+   DESCRIPTION "The number of compression initialization packets received."
+   ::= {ipxCircEntry 18}
+
+ipxCircCompressedRejectsReceived OBJECT-TYPE
+   SYNTAX      Counter32
+   MAX-ACCESS      read-only
+   STATUS      current
+   DESCRIPTION "The number of compressed packet rejected packets received."
+   ::= {ipxCircEntry 19}
+
+ipxCircUncompressedReceived OBJECT-TYPE
+   SYNTAX      Counter32
+   MAX-ACCESS      read-only
+   STATUS      current
+   DESCRIPTION "The number of packets received without having been
+                compressed even though compression was turned on for
+                this circuit."
+   ::= {ipxCircEntry 20}
+
+ipxCircMediaType OBJECT-TYPE
+   SYNTAX      OCTET STRING (SIZE(2))
+   MAX-ACCESS      read-only
+   STATUS      current
+   DESCRIPTION "The media type used on this circuit."
+   ::= {ipxCircEntry 21}
+
+ipxCircNetNumber OBJECT-TYPE
+   SYNTAX      NetNumber
+   MAX-ACCESS      read-write
+   STATUS      current
+   DESCRIPTION "The IPX network number of this circuit.  This value may
+                be written only when creating a new entry in the table."
+   ::= {ipxCircEntry 22}
+
+ipxCircStateChanges OBJECT-TYPE
+   SYNTAX      Counter32
+   MAX-ACCESS      read-only
+   STATUS      current
+   DESCRIPTION "The number of times the circuit has changed state."
+   ::= {ipxCircEntry 23}
+
+ipxCircInitFails OBJECT-TYPE
+   SYNTAX      Counter32
+   MAX-ACCESS      read-only
+   STATUS      current
+   DESCRIPTION "The number of times that initialization of this
+                circuit has failed."
+   ::= {ipxCircEntry 24}
+
+ipxCircDelay OBJECT-TYPE
+   SYNTAX      INTEGER
+   MAX-ACCESS      read-only
+   STATUS      current
+   DESCRIPTION "The period of time, in milliseconds, that it takes to
+                transmit one byte of data, excluding protocol headers,
+                to a destination on the other end of the circuit, if 
+                the circuit is free of other traffic."
+   ::= {ipxCircEntry 25}
+
+ipxCircThroughput OBJECT-TYPE
+   SYNTAX      INTEGER
+   MAX-ACCESS      read-only
+   STATUS      current
+   DESCRIPTION "The amount of data, in bits per second, that may flow
+                through the circuit if there is no other traffic."
+   ::= {ipxCircEntry 26}
+
+ipxCircNeighRouterName OBJECT-TYPE
+   SYNTAX      OCTET STRING (SIZE(0..48))
+   MAX-ACCESS      read-only
+   STATUS      current
+   DESCRIPTION "The name of the neighboring router on a WAN circuit."
+   ::= {ipxCircEntry 27}
+
+ipxCircNeighInternalNetNum OBJECT-TYPE
+   SYNTAX      NetNumber
+   MAX-ACCESS      read-only
+   STATUS      current
+   DESCRIPTION "The internal network number of the neighboring router
+                on a WAN circuit."
+   ::= {ipxCircEntry 28}
+
+
+-- Forwarding Group
+--   This group provides a representation of the forwarding database used
+--   by all instances of IPX on the system.
+
+-- Destination Table
+--   The Destination table contains information about all known
+--   destinations.  The routing information shown in this table represents
+--   the path currently being used to reach the destination.
+
+ipxDestTable OBJECT-TYPE
+   SYNTAX      SEQUENCE OF IPXDestEntry
+   MAX-ACCESS      not-accessible
+   STATUS      current
+   DESCRIPTION "The Destination table contains information about all
+                known destinations."
+   ::= {ipxForwarding 1}
+
+ipxDestEntry OBJECT-TYPE
+   SYNTAX      IPXDestEntry
+   MAX-ACCESS      not-accessible
+   STATUS      current
+   DESCRIPTION "Each entry corresponds to one destination."
+   INDEX       {
+                ipxDestSysInstance,
+                ipxDestNetNum
+               }
+   ::= {ipxDestTable 1}
+
+IPXDestEntry ::= SEQUENCE {
+                     ipxDestSysInstance
+                        INTEGER,
+                     ipxDestNetNum
+                        NetNumber,
+                     ipxDestProtocol
+                        INTEGER,
+                     ipxDestTicks
+                        INTEGER,
+                     ipxDestHopCount
+                        INTEGER,
+                     ipxDestNextHopCircIndex
+                        INTEGER,
+                     ipxDestNextHopNICAddress
+                        PhysAddress,
+                     ipxDestNextHopNetNum
+                        NetNumber
+                    }
+
+ipxDestSysInstance OBJECT-TYPE
+   SYNTAX      INTEGER
+   MAX-ACCESS      read-only
+   STATUS      current
+   DESCRIPTION "The unique identifier of the instance of IPX
+                to which this row corresponds."
+   ::= {ipxDestEntry 1}
+
+ipxDestNetNum OBJECT-TYPE
+   SYNTAX      NetNumber
+   MAX-ACCESS      read-only
+   STATUS      current
+   DESCRIPTION "The IPX network number of the destination."
+   ::= {ipxDestEntry 2}
+
+ipxDestProtocol OBJECT-TYPE
+   SYNTAX      INTEGER {
+                        other(1),
+                        local(2),
+                        rip(3),
+                        nlsp(4),
+                        static(5)
+                       }
+   MAX-ACCESS      read-only
+   STATUS      current
+   DESCRIPTION "The routing protocol from which knowledge of this
+                destination was obtained."
+   ::= {ipxDestEntry 3}
+
+ipxDestTicks OBJECT-TYPE
+   SYNTAX      INTEGER
+   MAX-ACCESS      read-only
+   STATUS      current
+   DESCRIPTION "The delay in ticks to reach this destination."
+   ::= {ipxDestEntry 4}
+
+ipxDestHopCount OBJECT-TYPE
+   SYNTAX      INTEGER
+   MAX-ACCESS      read-only
+   STATUS      current
+   DESCRIPTION "The number of hops necessary to reach the destination."
+   ::= {ipxDestEntry 5}
+
+ipxDestNextHopCircIndex OBJECT-TYPE
+   SYNTAX      INTEGER
+   MAX-ACCESS      read-only
+   STATUS      current
+   DESCRIPTION "The unique identifier of the circuit used to reach the 
+                next hop."
+   ::= {ipxDestEntry 6}
+
+ipxDestNextHopNICAddress OBJECT-TYPE
+   SYNTAX      PhysAddress
+   MAX-ACCESS      read-only
+   STATUS      current
+   DESCRIPTION "The NIC address of the next hop."
+   ::= {ipxDestEntry 7}
+
+ipxDestNextHopNetNum OBJECT-TYPE
+   SYNTAX      NetNumber
+   MAX-ACCESS      read-only
+   STATUS      current
+   DESCRIPTION "The IPX network number of the next hop."
+   ::= {ipxDestEntry 8}
+
+
+-- Static Routes Table
+--   This table contains the information about all the static routes
+--   defined.  There may be more than one static route to any given
+--   destination.  Only the route currently being used will also be
+--   present in the Destination Table defined above.
+
+ipxStaticRouteTable OBJECT-TYPE
+   SYNTAX      SEQUENCE OF IPXStaticRouteEntry
+   MAX-ACCESS      not-accessible
+   STATUS      current
+   DESCRIPTION "The Static Routes table contains information about all
+                destinations reached via statically configured routes."
+   ::= {ipxForwarding 2}
+
+ipxStaticRouteEntry OBJECT-TYPE
+   SYNTAX      IPXStaticRouteEntry
+   MAX-ACCESS      not-accessible
+   STATUS      current
+   DESCRIPTION "Each entry corresponds to one static route."
+   INDEX       {
+                ipxStaticRouteSysInstance,
+                ipxStaticRouteCircIndex,
+                ipxStaticRouteNetNum
+               }
+   ::= {ipxStaticRouteTable 1}
+
+IPXStaticRouteEntry ::= SEQUENCE {
+                           ipxStaticRouteSysInstance
+                              INTEGER,
+                           ipxStaticRouteCircIndex
+                              INTEGER,
+                           ipxStaticRouteNetNum
+                              NetNumber,
+                           ipxStaticRouteExistState
+                              INTEGER,
+                           ipxStaticRouteTicks
+                              INTEGER,
+                           ipxStaticRouteHopCount
+                              INTEGER
+                          }
+
+ipxStaticRouteSysInstance OBJECT-TYPE
+   SYNTAX      INTEGER
+   MAX-ACCESS      read-write
+   STATUS      current
+   DESCRIPTION "The unique identifier of the instance of IPX to
+                which this row corresponds."
+   ::= {ipxStaticRouteEntry 1}
+
+ipxStaticRouteCircIndex OBJECT-TYPE
+   SYNTAX      INTEGER
+   MAX-ACCESS      read-write
+   STATUS      current
+   DESCRIPTION "The unique identifier of the circuit used to
+                reach the first hop in the static route."
+   ::= {ipxStaticRouteEntry 2}
+
+ipxStaticRouteNetNum OBJECT-TYPE
+   SYNTAX      NetNumber
+   MAX-ACCESS      read-write
+   STATUS      current
+   DESCRIPTION "The IPX network number of the route's destination."
+   ::= {ipxStaticRouteEntry 3}
+
+ipxStaticRouteExistState OBJECT-TYPE
+   SYNTAX      INTEGER {
+                        off(1),
+                        on(2)
+                       }
+   MAX-ACCESS      read-write
+   STATUS      current
+   DESCRIPTION "The validity of this static route.  Entries with the
+                value set to off may be deleted from the table at the
+                implementation's discretion."
+   ::= {ipxStaticRouteEntry 4}
+
+ipxStaticRouteTicks OBJECT-TYPE
+   SYNTAX      INTEGER
+   MAX-ACCESS      read-write
+   STATUS      current
+   DESCRIPTION "The delay, in ticks, to reach the route's destination."
+   ::= {ipxStaticRouteEntry 5}
+
+ipxStaticRouteHopCount OBJECT-TYPE
+   SYNTAX      INTEGER
+   MAX-ACCESS      read-write
+   STATUS      current
+   DESCRIPTION "The number of hops necessary to reach the destination."
+   ::= {ipxStaticRouteEntry 6}
+
+
+-- Services Group
+--   The Services group contains management information for all known
+--   services.
+
+-- Services Table
+--    This table contains the services information indexed by service
+--    name and type.
+
+ipxServTable OBJECT-TYPE
+   SYNTAX      SEQUENCE OF IPXServEntry
+   MAX-ACCESS      not-accessible
+   STATUS      current
+   DESCRIPTION "The table of services, indexed by name and type."
+   ::= {ipxServices 1}
+
+ipxServEntry OBJECT-TYPE
+   SYNTAX      IPXServEntry
+   MAX-ACCESS      not-accessible
+   STATUS      current
+   DESCRIPTION "Each entry corresponds to one service."
+   INDEX       {
+                ipxServSysInstance,
+                ipxServType,
+                ipxServName
+               }
+   ::= {ipxServTable 1}
+
+IPXServEntry ::= SEQUENCE {
+                     ipxServSysInstance
+                        INTEGER,
+                     ipxServType
+                        OCTET STRING,
+                     ipxServName
+                        OCTET STRING,
+                     ipxServProtocol
+                        INTEGER,
+                     ipxServNetNum
+                        NetNumber,
+                     ipxServNode
+                        OCTET STRING,
+                     ipxServSocket
+                        OCTET STRING,
+                     ipxServHopCount
+                        INTEGER
+                    }
+
+ipxServSysInstance OBJECT-TYPE
+   SYNTAX      INTEGER
+   MAX-ACCESS      read-only
+   STATUS      current
+   DESCRIPTION "The unique identifier of the instance of IPX
+                to which this entry corresponds."
+   ::= {ipxServEntry 1}
+
+ipxServType OBJECT-TYPE
+   SYNTAX      OCTET STRING (SIZE(2))
+   MAX-ACCESS      read-only
+   STATUS      current
+   DESCRIPTION "The service type."
+   ::= {ipxServEntry 2}
+
+ipxServName OBJECT-TYPE
+   SYNTAX      OCTET STRING (SIZE(1..48))
+   MAX-ACCESS      read-only
+   STATUS      current
+   DESCRIPTION "The service name."
+   ::= {ipxServEntry 3}
+
+ipxServProtocol OBJECT-TYPE
+   SYNTAX      INTEGER {
+                        other(1),
+                        local(2),
+                        nlsp(4),
+                        static(5),
+                        sap(6)
+                       }
+   MAX-ACCESS      read-only
+   STATUS      current
+   DESCRIPTION "The protocol from which knowledge of this service was
+                obtained."
+   ::= {ipxServEntry 4}
+
+ipxServNetNum OBJECT-TYPE
+   SYNTAX      NetNumber
+   MAX-ACCESS      read-only
+   STATUS      current
+   DESCRIPTION "The IPX network number portion of the IPX address of the
+                service."
+   ::= {ipxServEntry 5}
+
+ipxServNode OBJECT-TYPE
+   SYNTAX      OCTET STRING (SIZE(6))
+   MAX-ACCESS      read-only
+   STATUS      current
+   DESCRIPTION "The node portion of the IPX address of the service."
+   ::= {ipxServEntry 6}
+
+ipxServSocket OBJECT-TYPE
+   SYNTAX      OCTET STRING (SIZE(2))
+   MAX-ACCESS      read-only
+   STATUS      current
+   DESCRIPTION "The socket portion of the IPX address of the service."
+   ::= {ipxServEntry 7}
+
+ipxServHopCount OBJECT-TYPE
+   SYNTAX      INTEGER
+   MAX-ACCESS      read-only
+   STATUS      current
+   DESCRIPTION "The number of hops to the service."
+   ::= {ipxServEntry 8}
+
+
+-- Destination Services Table
+--   This table contains the services information indexed by address, 
+--   name, and type.
+
+ipxDestServTable OBJECT-TYPE
+   SYNTAX      SEQUENCE OF IPXDestServEntry
+   MAX-ACCESS      not-accessible
+   STATUS      current
+   DESCRIPTION "The table of services, indexed by address, name,
+                and type."
+   ::= {ipxServices 2}
+
+ipxDestServEntry OBJECT-TYPE
+   SYNTAX      IPXDestServEntry
+   MAX-ACCESS      not-accessible
+   STATUS      current
+   DESCRIPTION "Each entry corresponds to one service."
+   INDEX       {
+                ipxDestServSysInstance,
+                ipxDestServNetNum,
+                ipxDestServNode,
+                ipxDestServSocket,
+                ipxDestServName,
+                ipxDestServType
+               }
+   ::= {ipxDestServTable 1}
+
+IPXDestServEntry ::= SEQUENCE {
+                        ipxDestServSysInstance
+                           INTEGER,
+                        ipxDestServNetNum
+                           NetNumber,
+                        ipxDestServNode
+                           OCTET STRING,
+                        ipxDestServSocket
+                           OCTET STRING,
+                        ipxDestServName
+                           OCTET STRING,
+                        ipxDestServType
+                           OCTET STRING,
+                        ipxDestServProtocol
+                           INTEGER,
+                        ipxDestServHopCount
+                           INTEGER
+                       }
+
+ipxDestServSysInstance OBJECT-TYPE
+   SYNTAX      INTEGER
+   MAX-ACCESS      read-only
+   STATUS      current
+   DESCRIPTION "The unique identifier of the instance of IPX
+                to which this entry corresponds."
+   ::= {ipxDestServEntry 1}
+
+ipxDestServNetNum OBJECT-TYPE
+   SYNTAX      NetNumber
+   MAX-ACCESS      read-only
+   STATUS      current
+   DESCRIPTION "The IPX network number portion of the IPX address of the
+                service."
+   ::= {ipxDestServEntry 2}
+
+ipxDestServNode OBJECT-TYPE
+   SYNTAX      OCTET STRING (SIZE(6))
+   MAX-ACCESS      read-only
+   STATUS      current
+   DESCRIPTION "The node portion of the IPX address of the service."
+   ::= {ipxDestServEntry 3}
+
+ipxDestServSocket OBJECT-TYPE
+   SYNTAX      OCTET STRING (SIZE(2))
+   MAX-ACCESS      read-only
+   STATUS      current
+   DESCRIPTION "The socket portion of the IPX address of the service."
+   ::= {ipxDestServEntry 4}
+
+ipxDestServName OBJECT-TYPE
+   SYNTAX      OCTET STRING (SIZE(1..48))
+   MAX-ACCESS      read-only
+   STATUS      current
+   DESCRIPTION "The service name."
+   ::= {ipxDestServEntry 5}
+
+ipxDestServType OBJECT-TYPE
+   SYNTAX      OCTET STRING (SIZE(2))
+   MAX-ACCESS      read-only
+   STATUS      current
+   DESCRIPTION "The service type."
+   ::= {ipxDestServEntry 6}
+
+ipxDestServProtocol OBJECT-TYPE
+   SYNTAX      INTEGER {
+                        other(1),
+                        local(2),
+                        nlsp(4),
+                        static(5),
+                        sap(6)
+                       }
+   MAX-ACCESS      read-only
+   STATUS      current
+   DESCRIPTION "The protocol from which knowledge of this service was
+                obtained."
+   ::= {ipxDestServEntry 7}
+
+ipxDestServHopCount OBJECT-TYPE
+   SYNTAX      INTEGER
+   MAX-ACCESS      read-only
+   STATUS      current
+   DESCRIPTION "The number of hops to the service."
+   ::= {ipxDestServEntry 8}
+
+
+-- Static Services Table
+--   This table contains information for all services reached via a
+--   static route.
+
+ipxStaticServTable OBJECT-TYPE
+   SYNTAX      SEQUENCE OF IPXStaticServEntry
+   MAX-ACCESS      not-accessible
+   STATUS      current
+   DESCRIPTION "The Static Services table contains information about
+                all services reached via statically configured routes."
+   ::= {ipxServices 3}
+
+ipxStaticServEntry OBJECT-TYPE
+   SYNTAX      IPXStaticServEntry
+   MAX-ACCESS      not-accessible
+   STATUS      current
+   DESCRIPTION "Each entry corresponds to one service."
+   INDEX       {
+                ipxStaticServSysInstance,
+                ipxStaticServCircIndex,
+                ipxStaticServName,
+                ipxStaticServType
+               }
+   ::= {ipxStaticServTable 1}
+
+IPXStaticServEntry ::= SEQUENCE {
+                           ipxStaticServSysInstance
+                              INTEGER,
+                           ipxStaticServCircIndex
+                              INTEGER,
+                           ipxStaticServName
+                              OCTET STRING,
+                           ipxStaticServType
+                              OCTET STRING,
+                           ipxStaticServExistState
+                              INTEGER,
+                           ipxStaticServNetNum
+                              NetNumber,
+                           ipxStaticServNode
+                              OCTET STRING,
+                           ipxStaticServSocket
+                              OCTET STRING,
+                           ipxStaticServHopCount
+                              INTEGER
+                          }
+
+ipxStaticServSysInstance OBJECT-TYPE
+   SYNTAX      INTEGER
+   MAX-ACCESS      read-write
+   STATUS      current
+   DESCRIPTION "The unique identifier of the instance of IPX to which
+                this entry corresponds."
+   ::= {ipxStaticServEntry 1}
+
+ipxStaticServCircIndex OBJECT-TYPE
+   SYNTAX      INTEGER
+   MAX-ACCESS      read-write
+   STATUS      current
+   DESCRIPTION "The circuit used to reach this service."
+   ::= {ipxStaticServEntry 2}
+
+ipxStaticServName OBJECT-TYPE
+   SYNTAX      OCTET STRING (SIZE(1..48))
+   MAX-ACCESS      read-write
+   STATUS      current
+   DESCRIPTION "The service name."
+   ::= {ipxStaticServEntry 3}
+
+ipxStaticServType OBJECT-TYPE
+   SYNTAX      OCTET STRING (SIZE(2))
+   MAX-ACCESS      read-write
+   STATUS      current
+   DESCRIPTION "The service type."
+   ::= {ipxStaticServEntry 4}
+
+ipxStaticServExistState OBJECT-TYPE
+   SYNTAX      INTEGER {
+                        off(1),
+                        on(2)
+                       }
+   MAX-ACCESS      read-write
+   STATUS      current
+   DESCRIPTION "The validity of this static service.  Entries with the
+                value set to off may be deleted from the table at the
+                implementation's discretion."
+   ::= {ipxStaticServEntry 5}
+
+ipxStaticServNetNum OBJECT-TYPE
+   SYNTAX      NetNumber
+   MAX-ACCESS      read-write
+   STATUS      current
+   DESCRIPTION "The IPX network number portion of the IPX address of the
+                service."
+   ::= {ipxStaticServEntry 6}
+
+ipxStaticServNode OBJECT-TYPE
+   SYNTAX      OCTET STRING (SIZE(6))
+   MAX-ACCESS      read-write
+   STATUS      current
+   DESCRIPTION "The node portion of the IPX address of the service."
+   ::= {ipxStaticServEntry 7}
+
+ipxStaticServSocket OBJECT-TYPE
+   SYNTAX      OCTET STRING (SIZE(2))
+   MAX-ACCESS      read-write
+   STATUS      current
+   DESCRIPTION "The socket portion of the IPX address of the service."
+   ::= {ipxStaticServEntry 8}
+
+ipxStaticServHopCount OBJECT-TYPE
+   SYNTAX      INTEGER
+   MAX-ACCESS      read-write
+   STATUS      current
+   DESCRIPTION "The number of hops to the service."
+   ::= {ipxStaticServEntry 9}
+
+
+-- Traps
+--   The section describes the traps defined for IPX.
+
+ipxTrapCircuitDown TRAP-TYPE
+   ENTERPRISE    ipxTraps
+   VARIABLES     {
+                  ipxCircSysInstance,
+                  ipxCircIndex
+                 }
+   DESCRIPTION   "This trap signifies that the specified circuit has
+                  gone down."
+   --#TYPE "IPXTrapCircuitDown"
+   --#SUMMARY "IPX Circuit has gone down at: Instance = %d, Index = %d"
+   --#ARGUMENTS {0, 1}
+   --#SEVERITY INFORMATIONAL
+   --#TIMEINDEX 8        
+   --#HELP "nms.hlp"
+   --#HELPTAG 56025
+   --#STATE  OPERATIONAL     
+   ::= 1
+
+ipxTrapCircuitUp TRAP-TYPE
+   ENTERPRISE    ipxTraps
+   VARIABLES     {
+                  ipxCircSysInstance,
+                  ipxCircIndex
+                 }
+   DESCRIPTION   "This trap signifies that the specified circuit has
+                  come up."
+   --#TYPE "NLM: Informational alert"
+   --#SUMMARY "IPX Circuit has come up: Instance = %d, Index = %d"
+   --#ARGUMENTS {0, 1}
+   --#SEVERITY INFORMATIONAL
+   --#TIMEINDEX 8        
+   --#HELP "nms.hlp"
+   --#HELPTAG 56026
+   --#STATE  OPERATIONAL     
+   ::= 2
+
+END