Initial commitHEADmain

1 files changed, 405 insertions, 0 deletions

diff --git a/MIBS/nokia/ALCATEL-IND1-INLINE-POWER-MIB b/MIBS/nokia/ALCATEL-IND1-INLINE-POWER-MIB
new file mode 100644
index 0000000..b2e38d2
--- /dev/null
+++ b/MIBS/nokia/ALCATEL-IND1-INLINE-POWER-MIB
@@ -0,0 +1,405 @@
+ALCATEL-IND1-INLINE-POWER-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+	MODULE-IDENTITY, OBJECT-TYPE, Integer32, NOTIFICATION-TYPE
+		FROM SNMPv2-SMI
+	pethPsePortEntry, pethMainPseEntry
+		FROM POWER-ETHERNET-MIB
+        MODULE-COMPLIANCE, OBJECT-GROUP
+		FROM SNMPv2-CONF
+	softentIND1InLinePower, pethTraps
+		FROM ALCATEL-IND1-BASE;
+
+alcatelIND1INLINEPOWERMIB MODULE-IDENTITY
+    LAST-UPDATED "200704030000Z" 
+    ORGANIZATION "Alcatel-Lucent"
+    CONTACT-INFO
+        "Please consult with Customer Service to ensure the most appropriate
+         version of this document is used with the products in question:
+         
+                    Alcatel-Lucent, Enterprise Solutions Division
+                   (Formerly Alcatel Internetworking, Incorporated)
+                           26801 West Agoura Road
+                        Agoura Hills, CA  91301-5122
+                          United States Of America
+        
+        Telephone:               North America  +1 800 995 2696
+                                 Latin America  +1 877 919 9526
+                                 Europe         +31 23 556 0100
+                                 Asia           +65 394 7933
+                                 All Other      +1 818 878 4507
+        
+        Electronic Mail:         support@ind.alcatel.com
+        World Wide Web:          http://alcatel-lucent.com/wps/portal/enterprise
+        File Transfer Protocol:  ftp://ftp.ind.alcatel.com/pub/products/mibs"
+
+    DESCRIPTION
+        "This module describes an authoritative enterprise-specific Simple
+         Network Management Protocol (SNMP) Management Information Base (MIB):
+         
+             Propietary InLinePower Extensions MIB definitions
+         
+         The right to make changes in specification and other information
+         contained in this document without prior notice is reserved.
+         
+         No liability shall be assumed for any incidental, indirect, special,
+	 or consequential damages whatsoever arising from or related to this
+         document or the information contained herein.
+         
+         Vendors, end-users, and other interested parties are granted
+         non-exclusive license to use this specification in connection with
+         management of the products for which it is intended to be used.
+         
+                     Copyright (C) 1995-2007 Alcatel-Lucent
+                         ALL RIGHTS RESERVED WORLDWIDE"
+
+    REVISION      "200704030000Z"
+    DESCRIPTION
+        "The latest version of this MIB Module."
+
+    ::= { softentIND1InLinePower 1 }
+
+   alaPethObjects       OBJECT IDENTIFIER ::= { alcatelIND1INLINEPOWERMIB 1 }
+   alaPethConformance   OBJECT IDENTIFIER ::= { alcatelIND1INLINEPOWERMIB 2 }
+   alaPethMain       	OBJECT IDENTIFIER ::= { alcatelIND1INLINEPOWERMIB 3 }
+
+   -- PSE Objects
+
+     alaPethPsePortTable OBJECT-TYPE
+          SYNTAX      SEQUENCE OF AlaPethPsePortEntry
+          MAX-ACCESS  not-accessible
+          STATUS      current
+          DESCRIPTION
+              "A table of objects that augments the standard pethPsePortTable
+              entry by adding the alaPethPsePortPowerMaximum object."
+          ::= { alaPethObjects 1 }
+
+      alaPethPsePortEntry OBJECT-TYPE
+          SYNTAX      AlaPethPsePortEntry
+          MAX-ACCESS  not-accessible
+          STATUS      current
+          DESCRIPTION
+                  "A set of objects that display and control the power
+                  characteristics of a power Ethernet PSE port."
+          AUGMENTS  { pethPsePortEntry }  
+          ::= { alaPethPsePortTable 1 }
+
+
+      AlaPethPsePortEntry ::= SEQUENCE {
+           alaPethPsePortPowerMaximum
+                INTEGER,
+           alaPethPsePortPowerActual
+                INTEGER,
+           alaPethPsePortPowerStatus
+                INTEGER,
+	   alaPethPsePortPowerClass
+		INTEGER
+      }
+
+       alaPethPsePortPowerMaximum OBJECT-TYPE
+       SYNTAX INTEGER ( 3000 .. 20000 )   
+       MAX-ACCESS read-write
+       STATUS current
+       DESCRIPTION
+           "This object controls maximum amount of power per port." 
+       ::= { alaPethPsePortEntry 1 }
+
+       alaPethPsePortPowerActual OBJECT-TYPE
+       SYNTAX INTEGER ( 0 .. 30000 ) 
+       MAX-ACCESS read-only
+       STATUS current
+       DESCRIPTION
+           "This object contains the actual amount of power used by a port" 
+       ::= { alaPethPsePortEntry 2 }
+
+       alaPethPsePortPowerStatus OBJECT-TYPE
+       SYNTAX INTEGER   {
+                  powerOn(1),
+                  powerOff(2)
+       	   }
+       MAX-ACCESS read-only
+       STATUS current
+       DESCRIPTION
+           "This object contains the power status of a port" 
+       ::= { alaPethPsePortEntry 3 }
+
+       alaPethPsePortPowerClass OBJECT-TYPE
+       SYNTAX INTEGER  {
+                class0 (0),
+                class1 (1),
+                class2 (2),
+                class3 (3),
+                class4 (4),
+                class5 (5)
+                }
+       MAX-ACCESS read-only
+       STATUS current
+       DESCRIPTION
+           "This object controls class of poe device attached on a port.
+           class0 - The device can draw PD power from 0.44W to 12.95W and
+                    current less than 5.0 mA.
+           class1 - The device can draw PD power from 0.44W to 3.84W and
+                    current 10.5 mA.
+           class2 - The device can draw PD power from 3.84W to 6.49W and
+                    current 12.95 mA.
+           class3 - The device can draw PD power from 6.49W to 12.95W and
+                    current 28 mA.
+           class4 - This class is reserved for future use.
+           class5 - No Powered Device is connected to this POE port, or the
+                                port is powered down."
+       ::= { alaPethPsePortEntry 4 }
+
+   -- Main PSE Objects
+
+   alaPethMainPseTable OBJECT-TYPE
+          SYNTAX      SEQUENCE OF AlaPethMainPseEntry
+          MAX-ACCESS  not-accessible
+          STATUS      current
+          DESCRIPTION
+              "This table augments the standard table PethMainPseTable by allowing the 
+              admin status for a group to be set to on/off as well as
+              showing the values for the max power for that group."
+          ::= { alaPethObjects 2 }
+
+      alaPethMainPseEntry OBJECT-TYPE
+          SYNTAX      AlaPethMainPseEntry
+          MAX-ACCESS  not-accessible
+          STATUS      current
+          DESCRIPTION
+               "A set of objects that display and control the Main power
+                of a PSE. "
+          AUGMENTS  { pethMainPseEntry }  
+          ::= { alaPethMainPseTable 1 }
+
+      AlaPethMainPseEntry ::= SEQUENCE {
+          alaPethMainPseAdminStatus
+              INTEGER,
+          alaPethMainPseMaxPower 
+              Integer32,
+          alaPethMainPsePriorityDisconnect
+              INTEGER,
+          alaPethMainPseCapacitorDetect
+              INTEGER,
+          alaPethMainPsePriority
+              INTEGER,
+          alaPethMainPseComboPort
+              INTEGER
+      }
+
+        alaPethMainPseAdminStatus OBJECT-TYPE
+          SYNTAX INTEGER   {
+                  on(1),
+                  off(2)
+             }
+          MAX-ACCESS  read-write
+          STATUS      current
+          DESCRIPTION
+                  "The object is used to set the status of the main PSE to ON or OFF."
+          ::= { alaPethMainPseEntry 1 }
+
+        alaPethMainPseMaxPower OBJECT-TYPE
+          SYNTAX      Integer32  (36..800)
+          UNITS      "Watts"
+          MAX-ACCESS  read-write
+          STATUS      current
+          DESCRIPTION
+                  "The maximum amount of power allowed for main PSE." 
+          ::= { alaPethMainPseEntry 2 }
+          
+        alaPethMainPsePriorityDisconnect OBJECT-TYPE
+          SYNTAX INTEGER   {
+                  enable(1),
+                  disable(2)
+             }
+          MAX-ACCESS  read-write
+          STATUS      current
+          DESCRIPTION
+                  "The object is used to set the priority disconnect of the
+				   main PSE to Enabled or Disable."
+          ::= { alaPethMainPseEntry 3 }
+          
+        alaPethMainPseCapacitorDetect OBJECT-TYPE
+          SYNTAX INTEGER   {
+                  enable(1),
+                  disable(2)
+             }
+          MAX-ACCESS  read-write
+          STATUS      current
+          DESCRIPTION
+                  "The object is used to enable or disable the PowerDsine 
+				   Capacitor detection method." 
+          ::= { alaPethMainPseEntry 4 }
+          
+        alaPethMainPsePriority OBJECT-TYPE
+          SYNTAX INTEGER   {
+                  critical(1),
+                  high(2),
+                  low(3)
+             }
+          MAX-ACCESS  read-write
+          STATUS      current
+          DESCRIPTION
+                  "The object is set the power down priority for the slot"
+          ::= { alaPethMainPseEntry 5 }
+
+        alaPethMainPseComboPort OBJECT-TYPE
+          SYNTAX INTEGER   {
+                  enable(1),
+                  disable(2)
+             }
+          MAX-ACCESS  read-write
+          STATUS      current
+          DESCRIPTION
+                  "The object is used to set the combo port option of the
+                  main PSE to Enable or Disable."
+          ::= { alaPethMainPseEntry 6 }
+          
+   --
+   -- Conformance Section
+   --
+   alaPethCompliances OBJECT IDENTIFIER ::= { alaPethConformance 1 }
+   alaPethGroups      OBJECT IDENTIFIER ::= { alaPethConformance 2 }
+
+   alaPethCompliance MODULE-COMPLIANCE
+       STATUS  current
+       DESCRIPTION
+               "Describes the requirements for conformance to the
+               Alcatel Power Ethernet MIB."
+       MODULE  -- this module
+           GROUP   alaPethPsePortGroup
+           DESCRIPTION
+               "The alaPethPsePortGroup is mandatory for systems which
+               implement PSE ports."
+           GROUP   alaPethMainPseGroup
+           DESCRIPTION
+               "The pethMainPseGroup is mandatory for systems which
+               implement main power supply within a PSE Device."
+   ::= { alaPethCompliances 1 }
+
+   alaPethPseCompliance MODULE-COMPLIANCE
+       STATUS  current
+       DESCRIPTION
+               "Describes the requirements for conformance to the PSE"
+       MODULE  -- this module
+       MANDATORY-GROUPS {alaPethPsePortGroup, alaPethMainPseGroup}
+        ::= { alaPethCompliances 2 }
+
+   alaPethPsePortGroup OBJECT-GROUP
+       OBJECTS {
+          alaPethPsePortPowerMaximum,
+	  alaPethPsePortPowerActual,
+          alaPethPsePortPowerStatus,
+          alaPethPsePortPowerClass
+       }
+       STATUS  current
+       DESCRIPTION
+             "The pethPsePortGroup is mandatory for systems which
+             implement PSE ports."
+       ::= { alaPethGroups 1 }
+
+   alaPethMainPseGroup OBJECT-GROUP
+       OBJECTS {
+		alaPethMainPseAdminStatus,
+          	alaPethMainPseMaxPower,
+                alaPethMainPsePriorityDisconnect,
+        	alaPethMainPseCapacitorDetect,
+        	alaPethMainPsePriority,
+		alaPethMainPseComboPort
+       }
+       STATUS  current
+       DESCRIPTION
+               "Main PSE Objects. "
+       ::= { alaPethGroups 2 }
+
+   -- Peth Main
+
+     alaPethMainTable OBJECT-TYPE
+          SYNTAX      SEQUENCE OF AlaPethMainEntry
+          MAX-ACCESS  not-accessible
+          STATUS      current
+          DESCRIPTION
+              "A table of objects that augments the standard pethPsePortTable
+              entry by adding the alaPethPsePortPowerMaximum object."
+          ::= { alaPethMain 1 }
+
+      alaPethMainEntry OBJECT-TYPE
+          SYNTAX      AlaPethMainEntry
+          MAX-ACCESS  not-accessible
+          STATUS      current
+          DESCRIPTION
+                  "A set of objects that display and control the power
+                  characteristics of a power Ethernet PSE port."
+	      INDEX { alaPethMainIndex }
+          ::= { alaPethMainTable 1 }
+
+      AlaPethMainEntry ::= SEQUENCE {
+           alaPethMainIndex
+             Integer32,
+           alaPethMainPowerRedundancy
+                INTEGER
+      }
+        alaPethMainIndex OBJECT-TYPE
+          SYNTAX       Integer32 (1..2147483647)
+          MAX-ACCESS  not-accessible
+          STATUS      current
+          DESCRIPTION
+              "This variable uniquely identifies the group to which
+              power Ethernet PSE is connected.Group means (box in the stack,
+              module in a rack) and  the value 1 MUST be  used for non-modular
+              devices "
+          ::= { alaPethMainEntry  1 }
+
+       alaPethMainPowerRedundancy OBJECT-TYPE
+	   SYNTAX INTEGER   {
+                  enable(1),
+                  disable(2)
+       }
+       MAX-ACCESS read-write
+       STATUS current
+       DESCRIPTION
+           "This object controls power supply redundancy." 
+       ::= { alaPethMainEntry  2 }
+
+
+   -- Notification Objects
+
+   alaPethNotificationObjects OBJECT IDENTIFIER ::= { alaPethObjects 3 }
+
+	pethSourceSlot  OBJECT-TYPE
+	    SYNTAX  INTEGER  (1..64)
+	    MAX-ACCESS  read-only
+	    STATUS  current
+	    DESCRIPTION
+		    "Slot number of generating entity."
+          ::= { alaPethNotificationObjects 1 }
+
+	pethSourcePort  OBJECT-TYPE
+	    SYNTAX  INTEGER  (1..48)
+	    MAX-ACCESS  read-only
+	    STATUS  current
+	    DESCRIPTION
+		    "Port number of generating entity."
+          ::= { alaPethNotificationObjects 2 }
+
+   --  NOTIFICATIONS
+
+	pethPwrSupplyConflict  NOTIFICATION-TYPE
+	   OBJECTS {
+	       pethSourceSlot
+                   }
+	   STATUS   current
+	   DESCRIPTION 
+	       "Power supply type conflict trap."
+	    ::= { pethTraps 0 1 }
+
+	pethPwrSupplyNotSupported  NOTIFICATION-TYPE
+	   OBJECTS {
+	       pethSourceSlot
+                   }
+	   STATUS   current
+	   DESCRIPTION 
+	       "Power supply not supported trap."
+	    ::= { pethTraps 0 2 }
+
+
+END