Initial commitHEADmain

1 files changed, 1134 insertions, 0 deletions

diff --git a/MIBS/nokia/ALCATEL-IND1-CONFIG-MGR-MIB b/MIBS/nokia/ALCATEL-IND1-CONFIG-MGR-MIB
new file mode 100644
index 0000000..6853805
--- /dev/null
+++ b/MIBS/nokia/ALCATEL-IND1-CONFIG-MGR-MIB
@@ -0,0 +1,1134 @@
+ALCATEL-IND1-CONFIG-MGR-MIB DEFINITIONS ::= BEGIN
+
+
+	IMPORTS
+		OBJECT-TYPE,
+		MODULE-IDENTITY,
+		OBJECT-IDENTITY		FROM SNMPv2-SMI
+		DisplayString		FROM SNMPv2-TC
+		MODULE-COMPLIANCE,
+		OBJECT-GROUP		FROM SNMPv2-CONF
+		softentIND1Confmgr	FROM ALCATEL-IND1-BASE
+		;
+
+
+
+	alcatelIND1ConfigMgrMIB   MODULE-IDENTITY
+		LAST-UPDATED 	 "200704030000Z"
+		ORGANIZATION 	 "Alcatel-Lucent"
+		CONTACT-INFO
+			"Please consult with Customer Service to ensure the most appropriate
+	   	         version of this document is used with the products in question:
+
+			 Alcatel-Lucent, Enterprise Solutions Division
+		         (Formerly Alcatel Internetworking, Incorporated)
+			       26801 West Agoura Road
+			      Agoura Hills, CA  91301-5122
+			      United States Of America
+
+	    		 Telephone:        North America  +1 800 995 2696
+				 	   Latin America  +1 877 919 9526
+				           Europe         +31 23 556 0100
+				           Asia           +65 394 7933
+				           All Other      +1 818 878 4507
+
+	    		 Electronic Mail:         support@ind.alcatel.com
+	    		 World Wide Web:          http://alcatel-lucent.com/wps/portal/enterprise
+	    	   	 File Transfer Protocol:  ftp://ftp.ind.alcatel.com/pub/products/mibs"
+
+	DESCRIPTION
+	    "This module describes an authoritative enterprise-specific Simple
+             Network Management Protocol (SNMP) Management Information Base (MIB):
+
+                 For the Birds Of Prey Product Line
+                 Configuration Manager Subsystem.
+
+             The right to make changes in specification and other information
+             contained in this document without prior notice is reserved.
+
+             No liability shall be assumed for any incidental, indirect, special, or
+             consequential damages whatsoever arising from or related to this
+             document or the information contained herein.
+
+             Vendors, end-users, and other interested parties are granted
+             non-exclusive license to use this specification in connection with
+             management of the products for which it is intended to be used.
+
+                         Copyright (C) 1995-2007 Alcatel-Lucent
+                             ALL RIGHTS RESERVED WORLDWIDE"
+
+	REVISION	 "200704030000Z"
+	DESCRIPTION
+		"The latest version of this MIB Module."
+
+	::= { softentIND1Confmgr 1}
+
+
+	alcatelIND1ConfigMgrMIBObjects  OBJECT-IDENTITY
+        	STATUS  current
+        	DESCRIPTION
+            	    "Branch For Configuration Manager Subsystem Managed Objects."
+        ::= { alcatelIND1ConfigMgrMIB 1 }
+
+
+    	alcatelIND1ConfigMgrMIBConformance  OBJECT-IDENTITY
+        	STATUS  current
+        	DESCRIPTION
+            	    "Branch For Configuration Manager Subsystem Conformance Information."
+        ::= { alcatelIND1ConfigMgrMIB 2 }
+
+
+    	alcatelIND1ConfigMgrMIBGroups  OBJECT-IDENTITY
+        	STATUS  current
+        	DESCRIPTION
+            	    "Branch For Configuration Manager Subsystem Units Of Conformance."
+        ::= { alcatelIND1ConfigMgrMIBConformance 1 }
+
+
+    	alcatelIND1ConfigMgrMIBCompliances  OBJECT-IDENTITY
+        	STATUS  current
+        	DESCRIPTION
+            	    "Branch For Configuration Manager Subsystem Compliance Statements."
+        ::= { alcatelIND1ConfigMgrMIBConformance 2 }
+
+
+--
+-- Configuration Manager
+--
+
+	configManager	OBJECT IDENTIFIER ::= { alcatelIND1ConfigMgrMIBObjects 1 }
+
+
+	configFileName		OBJECT-TYPE
+		SYNTAX		DisplayString (SIZE (0..30))
+		MAX-ACCESS	read-write
+		STATUS		current
+		DESCRIPTION
+			"The name of the configuration file to be
+			 read by the device. The file specified
+			 should be present on the device."
+		DEFVAL  { "" }
+		::= { configManager 1 }
+
+
+	configFileAction	OBJECT-TYPE
+		SYNTAX		INTEGER {
+				none(1),
+				checkSyntaxOnly(2),
+				apply(3)
+				}
+		MAX-ACCESS 	read-write
+		STATUS		current
+		DESCRIPTION
+			"Triggers application of the configuration
+			 file specified by the configInputFileName.
+			 A value of checkSyntax causes configInputFile
+			 to be checked for syntax, with no changes to
+			 device configuration. A value of
+			 checkSyntaxAndApply causes the configInputFile
+			 to be applied to the device configuration.A value
+			 of none indicates no action has been triggered."
+		DEFVAL  { none }
+		::= { configManager 2 }
+
+
+	configErrorFileName	OBJECT-TYPE
+		SYNTAX		DisplayString (SIZE (0..255))
+		MAX-ACCESS	read-only
+		STATUS		current
+		DESCRIPTION
+			"The name of the file containing the error
+			 messages generated by the device during file
+			 configuration."
+		DEFVAL  { "" }
+		::= { configManager 3 }
+
+
+	configFileStatus	OBJECT-TYPE
+		SYNTAX		INTEGER {
+					noneAvail(1),
+					inProgress(2),
+					completeNoErrors(3),
+					completeErrors(4)
+					}
+		MAX-ACCESS		read-only
+		STATUS		current
+		DESCRIPTION
+			"Status of most recent application of configuration
+			 file to the device."
+		DEFVAL  { noneAvail }
+		::= { configManager 4 }
+
+
+	configFileMode		OBJECT-TYPE
+		SYNTAX		INTEGER {
+				none(1),
+				verbose(2)
+				}
+		MAX-ACCESS	read-write
+		STATUS		current
+		DESCRIPTION
+			"The verbose mode displays all configuration commands
+			 and errors when the file is applied on the console
+			 screen.  Ignored unless set from command line interface."
+		DEFVAL  { none }
+		::= { configManager 5 }
+
+
+	configTimerFileName	OBJECT-TYPE
+		SYNTAX		DisplayString (SIZE (0..30))
+		MAX-ACCESS	read-write
+		STATUS		current
+		DESCRIPTION
+			"The name of the configuration file to be read later
+			 by the device."
+		DEFVAL  { "" }
+		::= { configManager 6 }
+
+
+	configTimerFileTime	OBJECT-TYPE
+		SYNTAX		DisplayString (SIZE (0..16))
+		MAX-ACCESS	read-write
+		STATUS		current
+		DESCRIPTION
+			"The local time when the configuration file
+			 will be read by the device. This object is
+			 only set if the configInputFile must be applied
+			 at a later time.
+			 The following formats are valid:
+
+			  MM/DD/YYYY hh:mm
+
+                          MM/DD/YY hh:mm
+
+                          MM/DD hh:mm -  uses current year if
+					 after current date and time,
+					 next year otherwise.
+
+                          hh:mm -  uses today's date if later
+				   than current time,
+			           tommorow's date otherwise.
+                      where
+                        YY - year   (0-38,99)
+                        MM - month  (1-12)
+                        DD - day    (1-31)
+                        hh - hour   (0-23)
+                        mm - minute (0-59)"
+		DEFVAL  { "" }
+		::= { configManager 7 }
+
+
+	configTimerFileStatus	OBJECT-TYPE
+		SYNTAX		INTEGER {
+				idle(1),
+				pending(2),
+				inProgress(3)
+				}
+		MAX-ACCESS	read-only
+		STATUS		current
+		DESCRIPTION
+			"The current status of the ASCII configuration
+			 timer."
+		DEFVAL  { idle }
+		::= { configManager 8 }
+
+
+	configTimerClear	OBJECT-TYPE
+		SYNTAX		INTEGER (1..1)
+		MAX-ACCESS	read-write
+		STATUS		current
+		DESCRIPTION
+			"A set of this object causes the ASCII
+			 configuration timer to be cleared."
+		DEFVAL  { 1 }
+		::= { configManager 9 }
+
+
+	configSnapshotFileName	OBJECT-TYPE
+		SYNTAX		DisplayString (SIZE (0..30))
+		MAX-ACCESS	read-write
+		STATUS		current
+		DESCRIPTION
+			"The name of the configuration snap-shot file
+			 to be generated by the device."
+		DEFVAL  { "" }
+		::= { configManager 10 }
+
+
+	configSnapshotAction	OBJECT-TYPE
+		SYNTAX		INTEGER (1..1)
+		MAX-ACCESS	read-write
+		STATUS		current
+		DESCRIPTION
+			"A set of this object causes the configuration
+			 snap-shot to be generated by the device."
+		DEFVAL  { 1 }
+		::= { configManager 11 }
+
+
+	configSnapshotAllSelect			OBJECT-TYPE
+		SYNTAX				INTEGER (0..1)
+		MAX-ACCESS			read-write
+		STATUS				current
+		DESCRIPTION
+			"A set of this object causes
+			 all application configuration data to be
+			 included in the snap-shot file generated by
+			 the device."
+		DEFVAL  { 0 }
+		::= { configManager 12 }
+
+
+	configSnapshotVlanSelect		OBJECT-TYPE
+		SYNTAX				INTEGER (0..1)
+		MAX-ACCESS			read-write
+		STATUS				current
+		DESCRIPTION
+			"A set of this object causes
+			 Vlan configuration data to be
+			 included in the snap-shot file generated by
+			 the device."
+		DEFVAL  { 0 }
+		::= { configManager 13 }
+
+
+	configSnapshotSpanningTreeSelect	OBJECT-TYPE
+		SYNTAX				INTEGER (0..1)
+		MAX-ACCESS			read-write
+		STATUS				current
+		DESCRIPTION
+			"A set of this object causes
+			 Spanning Tree configuration data to be
+			 included in the snap-shot file generated by
+			 the device."
+		DEFVAL  { 0 }
+		::= { configManager 14 }
+
+
+	configSnapshotQOSSelect		OBJECT-TYPE
+		SYNTAX			INTEGER (0..1)
+		MAX-ACCESS		read-write
+		STATUS			current
+		DESCRIPTION
+			"A set of this object causes
+			 QOS configuration data to be included
+			 in the snap-shot file generated by the
+			 the device."
+		DEFVAL  { 0 }
+		::= { configManager 15 }
+
+
+	configSnapshotIPSelect		OBJECT-TYPE
+		SYNTAX			INTEGER (0..1)
+		MAX-ACCESS		read-write
+		STATUS			current
+		DESCRIPTION
+			"A set of this object causes
+			 IP configuration data to be included
+			 in the snap-shot file generated by the
+			 the device."
+		DEFVAL  { 0 }
+		::= { configManager 16 }
+
+
+	configSnapshotIPXSelect		OBJECT-TYPE
+		SYNTAX			INTEGER (0..1)
+		MAX-ACCESS		read-write
+		STATUS			current
+		DESCRIPTION
+			"A set of this object causes
+			 IPX configuration data to be included
+			 in the snap-shot file generated by the
+			 the device."
+		DEFVAL  { 0 }
+		::= { configManager 17 }
+
+
+	configSnapshotIPMSSelect	OBJECT-TYPE
+		SYNTAX			INTEGER (0..1)
+		MAX-ACCESS		read-write
+		STATUS			current
+		DESCRIPTION
+			"A set of this object causes
+			 IPMS configuration data to be included
+			 in the snap-shot file generated by the
+			 the device."
+		DEFVAL  { 0 }
+		::= { configManager 18 }
+
+	configSnapshotAAASelect		OBJECT-TYPE
+		SYNTAX			INTEGER (0..1)
+		MAX-ACCESS		read-write
+		STATUS			current
+		DESCRIPTION
+			"A set of this object causes
+			 AAA configuration data to be included
+			 in the snap-shot file generated by the
+			 the device."
+		DEFVAL  { 0 }
+		::= { configManager 19 }
+
+
+	configSnapshotSNMPSelect	OBJECT-TYPE
+		SYNTAX			INTEGER (0..1)
+		MAX-ACCESS		read-write
+		STATUS			current
+		DESCRIPTION
+			"A set of this object causes
+			 SNMP configuration data to be included
+			 in the snap-shot file generated by the
+			 the device."
+		DEFVAL  { 0 }
+		::= { configManager 20 }
+
+
+	configSnapshot8021QSelect	OBJECT-TYPE
+		SYNTAX			INTEGER (0..1)
+		MAX-ACCESS		read-write
+		STATUS			current
+		DESCRIPTION
+			"A set of this object causes
+			 802.1Q configuration data to be included
+			 in the snap-shot file generated by the
+			 the device."
+		DEFVAL  { 0 }
+		::= { configManager 21 }
+
+
+	configSnapshotLinkAggregateSelect	OBJECT-TYPE
+		SYNTAX			INTEGER (0..1)
+		MAX-ACCESS		read-write
+		STATUS			current
+		DESCRIPTION
+			"A set of this object causes
+			 link aggregation configuration data to
+			 be included in the snap-shot file generated
+			 by the device."
+		DEFVAL  { 0 }
+		::= { configManager 22 }
+
+
+	configSnapshotPortMirrorSelect	OBJECT-TYPE
+		SYNTAX			INTEGER (0..1)
+		MAX-ACCESS		read-write
+		STATUS			current
+		DESCRIPTION
+			"A set of this object causes
+			 port mirroring configuration data to
+			 be included in the snap-shot file generated
+			 by the device."
+		DEFVAL  { 0 }
+		::= { configManager 23 }
+
+
+	configSnapshotXIPSelect		OBJECT-TYPE
+		SYNTAX			INTEGER (0..1)
+		MAX-ACCESS		read-write
+		STATUS			current
+		DESCRIPTION
+			"A set of this object causes
+			 proprietary inter-switch protocol configuration
+			 data to be included in the snap-shot file generated
+			 by the device."
+		DEFVAL  { 0 }
+		::= { configManager 24 }
+
+
+	configSnapshotHealthMonitorSelect	OBJECT-TYPE
+		SYNTAX			INTEGER (0..1)
+		MAX-ACCESS		read-write
+		STATUS			current
+		DESCRIPTION
+			"A set of this object causes
+			 health monitoring configuration data to
+			 be included in the snap-shot file generated
+			 by the device."
+		DEFVAL  { 0 }
+		::= { configManager 25 }
+
+
+	configSnapshotBootPSelect	OBJECT-TYPE
+		SYNTAX			INTEGER (0..1)
+		MAX-ACCESS		read-write
+		STATUS			current
+		DESCRIPTION
+			"A set of this object causes
+			 bootp configuration data to
+			 be included in the snap-shot file generated
+			 by the device."
+		DEFVAL  { 0 }
+		::= { configManager 26 }
+
+
+	configSnapshotBridgeSelect	OBJECT-TYPE
+		SYNTAX			INTEGER (0..1)
+		MAX-ACCESS		read-write
+		STATUS			current
+		DESCRIPTION
+			"A set of this object causes
+			 source-learning configuration data to
+			 be included in the snap-shot file generated
+			 by the device."
+		DEFVAL  { 0 }
+		::= { configManager 27 }
+
+
+	configSnapshotChassisSelect	OBJECT-TYPE
+		SYNTAX			INTEGER (0..1)
+		MAX-ACCESS		read-write
+		STATUS			current
+		DESCRIPTION
+			"A set of this object causes
+			 the chassis configuration data to
+			 be included in the snap-shot file generated
+			 by the device."
+		DEFVAL  { 0 }
+		::= { configManager 28 }
+
+
+	configSnapshotInterfaceSelect	OBJECT-TYPE
+		SYNTAX			INTEGER (0..1)
+		MAX-ACCESS		read-write
+		STATUS			current
+		DESCRIPTION
+			"A set of this object causes
+			 ethernet interface configuration data to
+			 be included in the snap-shot file generated
+			 by the device."
+		DEFVAL  { 0 }
+		::= { configManager 29 }
+
+
+	configSnapshotPolicySelect	OBJECT-TYPE
+		SYNTAX			INTEGER (0..1)
+		MAX-ACCESS		read-write
+		STATUS			current
+		DESCRIPTION
+			"A set of this object causes
+			 policy manager configuration data to
+			 be included in the snap-shot file generated
+			 by the device."
+		DEFVAL  { 0 }
+		::= { configManager 30 }
+
+
+	configSnapshotSessionSelect	OBJECT-TYPE
+		SYNTAX			INTEGER (0..1)
+		MAX-ACCESS		read-write
+		STATUS			current
+		DESCRIPTION
+			"A set of this object causes
+			 the user-session configuration data to
+			 be included in the snap-shot file generated
+			 by the device."
+		DEFVAL  { 0 }
+		::= { configManager 31 }
+
+
+	configSnapshotServerLoadBalanceSelect	OBJECT-TYPE
+		SYNTAX			INTEGER (0..1)
+		MAX-ACCESS		read-write
+		STATUS			current
+		DESCRIPTION
+			"A set of this object causes
+			 server load balancing configuration data to
+			 be included in the snap-shot file generated
+			 by the device."
+		DEFVAL  { 0 }
+		::= { configManager 32 }
+
+
+	configSnapshotSystemServiceSelect	OBJECT-TYPE
+		SYNTAX			INTEGER (0..1)
+		MAX-ACCESS		read-write
+		STATUS			current
+		DESCRIPTION
+			"A set of this object causes
+			 system services configuration data to
+			 be included in the snap-shot file generated
+			 by the device."
+		DEFVAL  { 0 }
+		::= { configManager 33 }
+
+
+	configSnapshotVRRPSelect	OBJECT-TYPE
+		SYNTAX			INTEGER (0..1)
+		MAX-ACCESS		read-write
+		STATUS			current
+		DESCRIPTION
+			"A set of this object causes
+			 VRRP configuration data to
+			 be included in the snap-shot file generated
+			 by the device."
+		DEFVAL  { 0 }
+		::= { configManager 34 }
+
+
+	configSnapshotWebSelect		OBJECT-TYPE
+		SYNTAX			INTEGER (0..1)
+		MAX-ACCESS		read-write
+		STATUS			current
+		DESCRIPTION
+			"A set of this object causes
+			 web manager configuration data to
+			 be included in the snap-shot file generated
+			 by the device."
+		DEFVAL  { 0 }
+		::= { configManager 35 }
+
+
+	configSnapshotRIPSelect		OBJECT-TYPE
+		SYNTAX			INTEGER (0..1)
+		MAX-ACCESS		read-write
+		STATUS			current
+		DESCRIPTION
+			"A set of this object causes
+			 RIP configuration data to
+			 be included in the snap-shot file generated
+			 by the device."
+		DEFVAL  { 0 }
+		::= { configManager 36 }
+
+
+	configSnapshotOSPFSelect	OBJECT-TYPE
+		SYNTAX			INTEGER (0..1)
+		MAX-ACCESS		read-write
+		STATUS			current
+		DESCRIPTION
+			"A set of this object causes
+			 OSPF configuration data to
+			 be included in the snap-shot file generated
+			 by the device."
+		DEFVAL  { 0 }
+		::= { configManager 37 }
+
+
+	configSnapshotBGPSelect		OBJECT-TYPE
+		SYNTAX			INTEGER (0..1)
+		MAX-ACCESS		read-write
+		STATUS			current
+		DESCRIPTION
+			"A set of this object causes
+			 BGP configuration data to
+			 be included in the snap-shot file generated
+			 by the device."
+		DEFVAL  { 0 }
+		::= { configManager 38 }
+
+
+	configSnapshotIPRMSelect	OBJECT-TYPE
+		SYNTAX			INTEGER (0..1)
+		MAX-ACCESS		read-write
+		STATUS			current
+		DESCRIPTION
+			"A set of this object causes
+			 IPRM routing configuration data to
+			 be included in the snap-shot file generated
+			 by the device."
+		DEFVAL  { 0 }
+		::= { configManager 39 }
+
+
+	configSnapshotIPMRSelect	OBJECT-TYPE
+		SYNTAX			INTEGER (0..1)
+		MAX-ACCESS		read-write
+		STATUS			current
+		DESCRIPTION
+			"A set of this object causes
+			 IP multicast routing configuration data to
+			 be included in the snap-shot file generated
+			 by the device."
+		DEFVAL  { 0 }
+		::= { configManager 40 }
+
+
+	configSnapshotModuleSelect	OBJECT-TYPE
+		SYNTAX			INTEGER (0..1)
+		MAX-ACCESS		read-write
+		STATUS			current
+		DESCRIPTION
+			"A set of this object causes
+			 module configuration data to
+			 be included in the snap-shot file generated
+			 by the device."
+		DEFVAL  { 0 }
+		::= { configManager 41 }
+
+	configTechSupportLogAction	OBJECT-TYPE
+		SYNTAX			INTEGER {
+					   notSiginificant(0),
+					   techSupportBasic(1),
+					   techSupportL2(2),
+					   techSupportL3(3),
+					   techSupportL3Rip(4),
+					   techSupportL3Ipx(5),
+					   techSupportL3Ospf(6),
+					   techSupportL3Bgp(7),
+					   techSupportL3Pimsm(8),
+					   techSupportL3Mroute(9),
+					   techSupportL3Dvmrp(10),
+					   techSupportL3IPv6(11),
+                                           techSupportL3RIPng(12),
+                                           techSupportL3OSPF3(13),
+                                           techSupportL3Isis(14),
+                                           techSupportL3Pim6(15),
+                                           techSupportL3IPsec(16),
+                                           techSupportL3Bfd(17)
+
+				}
+		MAX-ACCESS		read-write
+		STATUS			current
+		DESCRIPTION
+			"A set of this object causes
+			 a tech_support.log file to be created
+			 containing switch information useful to
+			 a technical support group."
+		DEFVAL  { 1 }
+		::= { configManager 42 }
+
+	configWriteMemory		OBJECT-TYPE
+		SYNTAX			INTEGER (0..1)
+		MAX-ACCESS		read-write
+		STATUS			current
+		DESCRIPTION
+			"A set of this object causes
+			 the entire switch snap-shot configuration to
+			 be stored in the boot.cfg file in the
+			 working directory."
+		DEFVAL  { 0 }
+		::= { configManager 43 }
+
+	configErrorFileMaximum		OBJECT-TYPE
+		SYNTAX			INTEGER (1..25)
+		MAX-ACCESS		read-write
+		STATUS			current
+		DESCRIPTION
+			"The maximum number of error files which may be
+			 present on a switch.  Each time a new error file
+			 is created, all but the newest configErrorFileMaxNum
+			 error files are deleted."
+		DEFVAL  { 1 }
+		::= { configManager 44 }
+
+	configChangeStatus	OBJECT-TYPE
+		SYNTAX		INTEGER {
+				identical(1),
+				different(2)
+				}
+		MAX-ACCESS	read-only
+		STATUS		current
+		DESCRIPTION
+			"The current state of the running configuration with respect
+			 to the saved configuration."
+		DEFVAL  { identical }
+		::= { configManager 45 }
+
+	configSnapshotRDPSelect		OBJECT-TYPE
+		SYNTAX			INTEGER (0..1)
+		MAX-ACCESS		read-write
+		STATUS			current
+		DESCRIPTION
+			"A set of this object causes
+			 RDP configuration data to
+			 be included in the snap-shot file generated
+			 by the device."
+		DEFVAL  { 0 }
+		::= { configManager 46 }
+
+	configSnapshotIPv6Select	OBJECT-TYPE
+		SYNTAX			INTEGER (0..1)
+		MAX-ACCESS		read-write
+		STATUS			current
+		DESCRIPTION
+			"A set of this object causes
+			 IPv6 configuration data to
+			 be included in the snap-shot file generated
+			 by the device."
+		DEFVAL  { 0 }
+		::= { configManager 47 }
+
+	configSnapshotRIPngSelect	OBJECT-TYPE
+		SYNTAX			INTEGER (0..1)
+		MAX-ACCESS		read-write
+		STATUS			current
+		DESCRIPTION
+			"A set of this object causes
+			 RIPng configuration data to
+			 be included in the snap-shot file generated
+			 by the device."
+		DEFVAL  { 0 }
+		::= { configManager 48 }
+
+	configSnapshotAtmSelect	OBJECT-TYPE
+		SYNTAX			INTEGER (0..1)
+		MAX-ACCESS		read-write
+		STATUS			current
+		DESCRIPTION
+			"A set of this object causes
+			 ATM configuration data to
+			 be included in the snap-shot file generated
+			 by the device. NOT SUPPORTED."
+		DEFVAL  { 0 }
+		::= { configManager 49 }
+
+
+	configSnapshotSonetSelect	OBJECT-TYPE
+		SYNTAX			INTEGER (0..1)
+		MAX-ACCESS		read-write
+		STATUS			current
+		DESCRIPTION
+			"A set of this object causes
+			 Sonet configuration data to
+			 be included in the snap-shot file generated
+			 by the device. NOT SUPPORTED."
+		DEFVAL  { 0 }
+		::= { configManager 50 }
+
+	configSnapshotNTPSelect	OBJECT-TYPE
+		SYNTAX			INTEGER (0..1)
+		MAX-ACCESS		read-write
+		STATUS			current
+		DESCRIPTION
+			"A set of this object causes
+			 NTP configuration data to
+			 be included in the snap-shot file generated
+			 by the device."
+		DEFVAL  { 0 }
+		::= { configManager 51 }
+
+
+	configSnapshotPortMappingSelect	OBJECT-TYPE
+		SYNTAX			INTEGER (0..1)
+		MAX-ACCESS		read-write
+		STATUS			current
+		DESCRIPTION
+			"A set of this object causes
+			 Port Mapping configuration data to
+			 be included in the snap-shot file generated
+			 by the device."
+		DEFVAL  { 0 }
+		::= { configManager 52 }
+
+
+	configSnapshotOSPF3Select	OBJECT-TYPE
+		SYNTAX			INTEGER (0..1)
+		MAX-ACCESS		read-write
+		STATUS			current
+		DESCRIPTION
+			"A set of this object causes
+			 OSPF3 configuration data to
+			 be included in the snap-shot file generated
+			 by the device."
+		DEFVAL  { 0 }
+		::= { configManager 53 }
+
+      
+	configWriteMemoryStatus	OBJECT-TYPE
+		SYNTAX		INTEGER {
+					noneAvail(1),
+					inProgress(2),
+					completeNoErrors(3),
+					completeErrors(4)
+					}
+		MAX-ACCESS		read-only
+		STATUS		current
+		DESCRIPTION
+			"Status of most recent wwrite memory action."
+		DEFVAL  { noneAvail }
+		::= { configManager 54 }
+
+
+	configSnapshotStackSelect	OBJECT-TYPE
+		SYNTAX			INTEGER (0..1)
+		MAX-ACCESS		read-write
+		STATUS			current
+		DESCRIPTION
+			"A set of this object causes
+			 STack Manager configuration data to
+			 be included in the snap-shot file generated
+			 by the device."
+		DEFVAL  { 0 }
+		::= { configManager 55 }
+	
+       configSnapshotISISSelect	OBJECT-TYPE
+		SYNTAX			INTEGER (0..1)
+		MAX-ACCESS		read-write
+		STATUS			current
+		DESCRIPTION
+			"A set of this object causes
+			 ISIS configuration data to
+			 be included in the snap-shot file generated
+			 by the device."
+		DEFVAL  { 0 }
+		::= { configManager 56 }
+
+
+ 	configSnapshotEOAMSelect  OBJECT-TYPE
+                SYNTAX                  INTEGER (0..1)
+                MAX-ACCESS              read-write
+                STATUS                  current
+                DESCRIPTION
+                        "A set of this object causes
+                         Ethernet OAM configuration data to
+                         be included in the snap-shot file generated
+                         by the device."
+                DEFVAL  { 0 }
+                ::= { configManager 57 }
+
+
+	configSnapshotUDLDSelect        OBJECT-TYPE
+                SYNTAX                  INTEGER (0..1)
+                MAX-ACCESS              read-write
+                STATUS                  current
+                DESCRIPTION
+                        "A set of this object causes
+                         UDLD configuration data to
+                         be included in the snap-shot file generated
+                         by the device."
+                DEFVAL  { 0 }
+                ::= { configManager 58 }
+
+	configSnapshotNETSECSelect        OBJECT-TYPE
+                SYNTAX                  INTEGER (0..1)
+                MAX-ACCESS              read-write
+                STATUS                  current
+                DESCRIPTION
+                        "A set of this object causes
+                         NETSEC configuration data to
+                         be included in the snap-shot file generated
+                         by the device."
+                DEFVAL  { 0 }
+                ::= { configManager 59 }
+
+	configSnapshotIPsecSelect        OBJECT-TYPE
+                SYNTAX                  INTEGER (0..1)
+                MAX-ACCESS              read-write
+                STATUS                  current
+                DESCRIPTION
+                        "A set of this object causes
+                         IP Security configuration data to
+                         be included in the snap-shot file generated
+                         by the device."
+                DEFVAL  { 0 }
+                ::= { configManager 60 }
+
+	configSnapshotBFDSelect        OBJECT-TYPE
+                SYNTAX                  INTEGER (0..1)
+                MAX-ACCESS              read-write
+                STATUS                  current
+                DESCRIPTION
+                        "A set of this object causes
+                         BFD configuration data to
+                         be included in the snap-shot file generated
+                         by the device."
+                DEFVAL  { 0 }
+                ::= { configManager 61 }
+
+        configSnapshotErpSelect        OBJECT-TYPE
+                SYNTAX                  INTEGER (0..1)
+                MAX-ACCESS              read-write
+                STATUS                  current
+                DESCRIPTION
+                        "A set of this object causes
+                         ERP configuration data to
+                         be included in the snap-shot file generated
+                         by the device."
+                DEFVAL  { 0 }
+                ::= { configManager 62 }
+
+	configSnapshotMPLSSelect        OBJECT-TYPE
+                SYNTAX                  INTEGER (0..1)
+                MAX-ACCESS              read-write
+                STATUS                  current
+                DESCRIPTION
+                        "A set of this object causes
+                         MPLS configuration data to
+                         be included in the snap-shot file generated
+                         by the device."
+                DEFVAL  { 0 }
+                ::= { configManager 63 }
+
+	configSnapshotEFMOAMSelect        OBJECT-TYPE
+                SYNTAX                  INTEGER (0..1)
+                MAX-ACCESS              read-write
+                STATUS                  current
+                DESCRIPTION
+                        "A set of this object causes
+                         EFMOAM configuration data to
+                         be included in the snap-shot file generated
+                         by the device."
+                DEFVAL  { 0 }
+                ::= { configManager 64 }
+
+        configSnapshotLBDSelect        OBJECT-TYPE
+                SYNTAX                  INTEGER (0..1)
+                MAX-ACCESS              read-write
+                STATUS                  current
+                DESCRIPTION
+                        "A set of this object causes
+                        Loop Back Detection configuration data to
+                        be included in the snap-shot file generated
+                        by the device."
+                DEFVAL  { 0 }
+                ::= { configManager 65 }
+
+        configSnapshotSAASelect        OBJECT-TYPE
+                SYNTAX                  INTEGER (0..1)
+                MAX-ACCESS              read-write
+                STATUS                  current
+                DESCRIPTION
+                        "A set of this object causes
+                         SAA configuration data to
+                         be included in the snap-shot file generated
+                         by the device."
+                DEFVAL  { 0 }
+                ::= { configManager 66 }
+
+	configSnapshotDhcpSrvSelect OBJECT-TYPE
+                SYNTAX                  INTEGER (0..1)
+                MAX-ACCESS              read-write
+                STATUS                  current
+                DESCRIPTION
+                        "A set of this object causes
+			DHCP Server configuration data to
+			be included in the snap-shot file generated
+                         by the device."
+                DEFVAL  { 0 }
+                ::= { configManager 67 }
+
+--
+-- Compliance Statements
+--
+
+	alcatelIND1ConfigMgrMIBCompliance  MODULE-COMPLIANCE
+		STATUS  current
+		DESCRIPTION
+		    "Compliance statement for Configuration Manager Subsystem."
+		MODULE  -- this module
+
+		    MANDATORY-GROUPS
+		    {
+			configFileGroup,
+			configTimerFileGroup,
+			configSnapshotGroup,
+			configTechSupportLogGroup,
+			configWriteMemoryGroup
+		    }
+
+		::= { alcatelIND1ConfigMgrMIBCompliances  1 }
+
+
+--
+-- Units of Conformance
+--
+
+	configFileGroup  OBJECT-GROUP
+		OBJECTS
+		{
+		  configFileName,
+		  configFileAction,
+		  configErrorFileName,
+		  configFileStatus,
+		  configFileMode,
+	          configErrorFileMaximum,
+		  configChangeStatus
+		}
+		STATUS  current
+		DESCRIPTION
+		    "Collection of objects for file configuration."
+		::= { alcatelIND1ConfigMgrMIBGroups  1}
+
+
+	configTimerFileGroup  OBJECT-GROUP
+		OBJECTS
+		{
+	 	  configTimerFileName,
+		  configTimerFileTime,
+		  configTimerFileStatus,
+		  configTimerClear
+		}
+		STATUS  current
+		DESCRIPTION
+		    "Collection of objects for timer file configuration."
+		::= { alcatelIND1ConfigMgrMIBGroups  2}
+
+
+	configSnapshotGroup  OBJECT-GROUP
+		OBJECTS
+		{
+		  configSnapshotAllSelect,
+		  configSnapshotVlanSelect,
+		  configSnapshotSpanningTreeSelect,
+		  configSnapshotQOSSelect,
+		  configSnapshotIPSelect,
+		  configSnapshotIPXSelect,
+		  configSnapshotIPMSSelect,
+		  configSnapshotAAASelect,
+		  configSnapshotSNMPSelect,
+		  configSnapshot8021QSelect,
+		  configSnapshotLinkAggregateSelect,
+		  configSnapshotPortMirrorSelect,
+		  configSnapshotXIPSelect,
+		  configSnapshotHealthMonitorSelect,
+		  configSnapshotBootPSelect,
+		  configSnapshotBridgeSelect,
+		  configSnapshotChassisSelect,
+		  configSnapshotInterfaceSelect,
+		  configSnapshotPolicySelect,
+		  configSnapshotSessionSelect,
+		  configSnapshotServerLoadBalanceSelect,
+		  configSnapshotSystemServiceSelect,
+		  configSnapshotVRRPSelect,
+		  configSnapshotWebSelect,
+		  configSnapshotRIPSelect,
+		  configSnapshotOSPFSelect,
+		  configSnapshotBGPSelect,
+		  configSnapshotIPRMSelect,
+		  configSnapshotIPMRSelect,
+		  configSnapshotModuleSelect,
+		  configSnapshotRDPSelect,
+		  configSnapshotIPv6Select,
+		  configSnapshotOSPF3Select,
+		  configSnapshotStackSelect,
+                  configWriteMemoryStatus,
+                  configSnapshotISISSelect,
+		  configSnapshotEOAMSelect,
+		  configSnapshotUDLDSelect,
+		  configSnapshotNETSECSelect,
+		  configSnapshotIPsecSelect,
+		  configSnapshotBFDSelect,
+		  configSnapshotErpSelect,
+		  configSnapshotEFMOAMSelect,
+		  configSnapshotLBDSelect,
+		  configSnapshotSAASelect
+           	}
+		STATUS  current
+		DESCRIPTION
+		    "Collection of objects for snapshot configuration."
+		::=  { alcatelIND1ConfigMgrMIBGroups  3}
+
+
+	configTechSupportLogGroup  OBJECT-GROUP
+		OBJECTS
+		{
+		  configTechSupportLogAction
+		}
+		STATUS	current
+		DESCRIPTION
+		    "Collection of objects for technical support log file."
+		::= { alcatelIND1ConfigMgrMIBGroups  4}
+
+
+	configWriteMemoryGroup	OBJECT-GROUP
+		OBJECTS
+		{
+		  configWriteMemory
+		}
+		STATUS  current
+		DESCRIPTION
+		    "Collection of objects for write memory."
+		::= { alcatelIND1ConfigMgrMIBGroups  5}
+
+
+
+END